diff options
Diffstat (limited to 'recipes-bsp/bootfiles/rpi-config/0001-config.txt-reintroduce-start_x.patch')
| -rw-r--r-- | recipes-bsp/bootfiles/rpi-config/0001-config.txt-reintroduce-start_x.patch | 55 |
1 files changed, 55 insertions, 0 deletions
diff --git a/recipes-bsp/bootfiles/rpi-config/0001-config.txt-reintroduce-start_x.patch b/recipes-bsp/bootfiles/rpi-config/0001-config.txt-reintroduce-start_x.patch new file mode 100644 index 0000000..c6c51c9 --- /dev/null +++ b/recipes-bsp/bootfiles/rpi-config/0001-config.txt-reintroduce-start_x.patch @@ -0,0 +1,55 @@ +From ce27f7e22b2cd7453a425e08780a338a71301961 Mon Sep 17 00:00:00 2001 +From: Leon Anavi <leon.anavi@konsulko.com> +Date: Mon, 20 Nov 2023 15:19:15 +0200 +Subject: [PATCH] config.txt: reintroduce start_x + +Reintroduce configuration "start_x". Based on the experience with +Yocto/OpenEmbedded layer meta-raspberrypi, it has been observed +that Raspberry Pi 4B 4GB may fail to enable the camera if +"start_x=1" is at the end of the file. Therefore, "start_x=1" +is expected in config.txt template and it has been set to replace +the original occurrence, which is at the middle of the file. +Also update revision and date stamp. + +GitHub pull request: https://github.com/Evilpaul/RPi-config/pull/8 + +Upstream-Status: Submitted + +Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> +--- + config.txt | 12 +++++++++++- + 1 file changed, 11 insertions(+), 1 deletion(-) + +diff --git a/config.txt b/config.txt +index 1cf7b29..e28ed02 100644 +--- a/config.txt ++++ b/config.txt +@@ -1,7 +1,7 @@ + ################################################################################ + ## Raspberry Pi Configuration Settings + ## +-## Revision 17, 2021/08/15 ++## Revision 18, 2023/11/20 + ## + ## Details taken from the eLinux wiki and official Raspberry Pi documentation. + ## For up-to-date information please refer to links below. +@@ -760,6 +760,16 @@ + ## Camera Settings + ################################################################################ + ++## start_x ++## Set to "1" to enable the camera module. ++## ++## Enabling the camera requires gpu_mem option to be specified with a value ++## of at least 128. ++## ++## Default 0 ++## ++#start_x=0 ++ + ## disable_camera_led + ## Turn off the red camera led when recording video or taking a still + ## picture. +-- +2.39.2 + |