diff options
Diffstat (limited to 'recipes-kernel/linux/linux-yocto/qrb2210-dts/features/0012_arm64_dts_qcom_qrb2210_rb1_add_wifi_variant_property.patch')
| -rw-r--r-- | recipes-kernel/linux/linux-yocto/qrb2210-dts/features/0012_arm64_dts_qcom_qrb2210_rb1_add_wifi_variant_property.patch | 47 |
1 files changed, 47 insertions, 0 deletions
diff --git a/recipes-kernel/linux/linux-yocto/qrb2210-dts/features/0012_arm64_dts_qcom_qrb2210_rb1_add_wifi_variant_property.patch b/recipes-kernel/linux/linux-yocto/qrb2210-dts/features/0012_arm64_dts_qcom_qrb2210_rb1_add_wifi_variant_property.patch new file mode 100644 index 0000000..4c5d177 --- /dev/null +++ b/recipes-kernel/linux/linux-yocto/qrb2210-dts/features/0012_arm64_dts_qcom_qrb2210_rb1_add_wifi_variant_property.patch @@ -0,0 +1,47 @@ +From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Subject: arm64: dts: qcom: qrb2210-rb1: add wifi variant property +Date: Wed, 29 Nov 2023 15:44:09 +0100 + +The RB1 platform doesn't have board-specific board-id programmed, it uses +generic 0xff. Thus add the property with the 'variant' of the +calibration data. + +Note: the driver will check for the calibration data for the following +IDs, so existing board-2.bin files will continue to work. + +- 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120,variant=Thundercomm_RB1' +- 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120' +- 'bus=snoc,qmi-board-id=ff' + +For the reference, the board is identified by the driver in the +following way: + +ath10k_snoc c800000.wifi: qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000 +ath10k_snoc c800000.wifi: qmi fw_version 0x337302d3 fw_build_timestamp 2023-01-06 01:50 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.3.7.c2-00723-QCAHLSWMTPLZ-1 +ath10k_snoc c800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000 +ath10k_snoc c800000.wifi: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 +ath10k_snoc c800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790 +ath10k_snoc c800000.wifi: htt-ver 3.114 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1 + +Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> +Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> +Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +Upstream-Status: Backport [https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git b6a56a5a25d6273729b2b5139d58e3d390318ed2] +--- + arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +index ac597eb3fe9d..bd7bcf803654 100644 +--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts ++++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +@@ -535,6 +535,7 @@ &wifi { + vdd-1.8-xo-supply = <&pm2250_l13>; + vdd-1.3-rfa-supply = <&pm2250_l10>; + vdd-3.3-ch0-supply = <&pm2250_l22>; ++ qcom,ath10k-calibration-variant = "Thundercomm_RB1"; + status = "okay"; + }; + +-- +2.43.0 |