1 files changed, 0 insertions, 74 deletions
diff --git a/recipes-kernel/linux/linux-linaro-qcomlt-5.7/0001-arm64-dts-qcom-sm8250-Rename-UART2-node-to-UART12.patch b/recipes-kernel/linux/linux-linaro-qcomlt-5.7/0001-arm64-dts-qcom-sm8250-Rename-UART2-node-to-UART12.patch
deleted file mode 100644
index 6eb26cd..0000000
--- a/recipes-kernel/linux/linux-linaro-qcomlt-5.7/0001-arm64-dts-qcom-sm8250-Rename-UART2-node-to-UART12.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 7239ad605113c0945c94f0f75cfbeb3b1a38deb7 Mon Sep 17 00:00:00 2001
-From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-Date: Mon, 29 Jun 2020 21:09:02 +0530
-Subject: [PATCH] arm64: dts: qcom: sm8250: Rename UART2 node to UART12
-
-The UART12 node has been mistakenly mentioned as UART2. Let's fix that
-for both SM8250 SoC and MTP board and also add pinctrl definition for
-it.
-
-Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file")
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- arch/arm64/boot/dts/qcom/sm8250-mtp.dts |  4 ++--
- arch/arm64/boot/dts/qcom/sm8250.dtsi    | 11 ++++++++++-
- 2 files changed, 12 insertions(+), 3 deletions(-)
-
-diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
-index e9acda9f5b83..e844da89e688 100644
---- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
-+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
-@@ -13,7 +13,7 @@ / {
- 	compatible = "qcom,sm8250-mtp";
- 
- 	aliases {
--		serial0 = &uart2;
-+		serial0 = &uart12;
- 	};
- 
- 	chosen {
-@@ -359,7 +359,7 @@ &tlmm {
- 	gpio-reserved-ranges = <28 4>, <40 4>;
- };
- 
--&uart2 {
-+&uart12 {
- 	status = "okay";
- };
- 
-diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
-index 3ecc780a005d..ba8e8b8a90d2 100644
---- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
-+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
-@@ -865,11 +865,13 @@ spi12: spi@a90000 {
- 				status = "disabled";
- 			};
- 
--			uart2: serial@a90000 {
-+			uart12: serial@a90000 {
- 				compatible = "qcom,geni-debug-uart";
- 				reg = <0x0 0x00a90000 0x0 0x4000>;
- 				clock-names = "se";
- 				clocks = <&gcc 113>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&qup_uart12_default>;
- 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
- 				status = "disabled";
- 			};
-@@ -1839,6 +1841,13 @@ config {
- 					bias-disable;
- 				};
- 			};
-+
-+			qup_uart12_default: qup-uart12-default {
-+				mux {
-+					pins = "gpio34", "gpio35";
-+					function = "qup12";
-+				};
-+			};
- 		};
- 
- 		timer@17c20000 {
--- 
-2.27.0
-