Age | Commit message (Collapse) | Author |
|
This release provides a huge improvement regarding the support for SPL
to more boards.
We now uses this and migrated following boards:
- imx6qpsabresd -> imx6qdlsabresd
- imx6qsabresd -> imx6qdlsabresd
- imx6dlsabresd -> imx6qdlsabresd
- imx6solosabresd -> imx6qdlsabresd
- imx6qpsabreauto -> imx6qdlsabreauto
- imx6qsabreauto -> imx6qdlsabreauto
- imx6dlsabreauto -> imx6qdlsabreauto
- imx6solosabreauto -> imx6qdlsabreauto
So now, the 8 boards are covered by 2 machine files. This drastically
reduces the build time and allow for a better user experience as we
can use the same image to test different boards.
In summary an image built for imx6qdlsabresd or imx6qdlsabreauto is
capable of run on a its respective board which contains a i.MX6
QuadPlus, Quad, Dual, DualLite or Solo SoC removing the need of a
specific image for each SoC type.
On top of the official 2017.07 release, following patches are
included:
801fd44563 mx6sabreauto: Make Ethernet functional again
8ccb1970b8 wandboard: Set fdt based on board_rev and board_name
e6605743e5 mx6sabresd: Enable video interfaces in bootargs
e50a2475d4 mx6sabresd: Use LDO dtb file until LDO bypass support is added
b1a4715311 mx6slevk: Use LDO dtb file until LDO bypass support is added
957409876b imx: cx9020: try pxe boot, if no vmlinuz on mmc
3608315bf1 imx: cx9020: use fdt_addr_r and ramdisk_addr_r
9a1c960516 mx6sabreauto: Add Falcon mode support
3a279e5fe8 warp: Use PARTUUID to specify the rootfs location
0f9a6703e7 embestmx6boards: Use PARTUUID to specify the rootfs location
c877510614 mx6cuboxi: Use PARTUUID to specify the rootfs location
0ada2d6caf wandboard: Use PARTUUID to specify the rootfs location
eee442362c mx6sabre: Use PARTUUID to specify the rootfs location
80a56615fa mx6sabreauto: Do not enable WEIM by default
321339efd7 imx: reorganize IMX code as other SOCs
1567ce3edc mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
40294f880d dm: mmc: fsl_esdhc: handle vqmmc supply
0378edcd02 mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O
3657cae890 mmc: fsl_esdhc: correct type of wp_enable
45103e1030 imx6_spl: Add u-boot-dtb.img for SPL payload
61131fa4b5 mx6sabreauto: Update to SPL only mode
07a667be9b mx6qsabreauto: Add SPL support
4506c859ee mx6cuboxi: Add support for sata
a5c5962327 mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.
4590f11b61 mx6: soc: Move mxs_dma_init() into the mxs nand driver
10d185960e net: fec_mxc: fix PHY initialization bug with CONFIG_DM_ETH
b2d4bf303e icorem6_rqs: Rename icorem6_rqs config file
af34708e1e dt-bindings: Document the Broadcom STB wake-up timer node
3e92667cfe serial: mxc: Add debug uart support
4e2b31a5c5 serial: mxc: Code cleanup
27835dae1a serial: mxc: Move common baud gen into _mxc_serial_setbrg
1ca9fe11fd serial: mxc: Move common init into _mxc_serial_init
14ac9d06be serial: mxc: Move cr1 and cr2 write to mxc_serial_setbrg
fdd1f0debc serial: mxc: Use RFDIV in dm-code
fd008b0569 serial: mxc: Add common mxc_uart reg space
2fd7878124 imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL
5c72de6152 ot1200: enable CONFIG_IMX_THERMAL for detailed thermal information
8e38f54c56 mx6sabresd: Fix guard file symbol
3320a872b0 wandboard: Remove unnecessary delay
d5ae3ce6dd cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
1325b822da cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
844365a5a0 mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
ff9e6d62ed mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change description fields from Freescale to NXP in machine files to align to
2016 corporate transfer to NXP.
Signed-off-by: Alexandra Safta <alexandra-ioana.safta@nxp.com>
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The SOC_FAMILY is an indirection which makes the understanding, from
OpenEmbedded versed developers and users, more difficult. Instead of
using the SOC_FAMILY indirection which is rarely used, we now move to
the MACHINEOVERRIDES mechanism as this is in fact what is in use.
Change-Id: Ic6e58b79bdc990ac853c87761c3fff635786e4e5
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
ARM: dts: imx6qdl-sabreauto: add enet irq dts files to avoid conflict with MLB
ENET gpio irq pin conlict with MLB on i.MX6qdl sabreauto board, since enet
gpio irq is extended feature for performance improvement, so let MLB enable
in default dts file and newly create sabreauto enet irq dts files.
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The meta-fsl-arm is going to be used as the base for this layer. It
contains a clean history and allowing a more granullar set of changes.
This commit is just a rename of all contents of meta-fsl-arm
subdirectory to this layer's root, subsequent changes are based on top
of that.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|