blob: c4cf809cad842a0b06f26302f6c64a4f7053689d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
|
.. SPDX-License-Identifier: GPL-2.0
==============================================================
Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux
==============================================================
Note: This driver doesn't have a maintainer.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
This driver provides kernel support for Davicom DM9102(A)/DM9132/DM9801 ethernet cards ( CNET
10/100 ethernet cards uses Davicom chipset too, so this driver supports CNET cards too ).If you
didn't compile this driver as a module, it will automatically load itself on boot and print a
line similar to::
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
If you compiled this driver as a module, you have to load it on boot.You can load it with command::
insmod dmfe
This way it will autodetect the device mode.This is the suggested way to load the module.Or you can pass
a mode= setting to module while loading, like::
insmod dmfe mode=0 # Force 10M Half Duplex
insmod dmfe mode=1 # Force 100M Half Duplex
insmod dmfe mode=4 # Force 10M Full Duplex
insmod dmfe mode=5 # Force 100M Full Duplex
Next you should configure your network interface with a command similar to::
ifconfig eth0 172.22.3.18
^^^^^^^^^^^
Your IP Address
Then you may have to modify the default routing table with command::
route add default eth0
Now your ethernet card should be up and running.
TODO:
- Implement pci_driver::suspend() and pci_driver::resume() power management methods.
- Check on 64 bit boxes.
- Check and fix on big endian boxes.
- Test and make sure PCI latency is now correct for all cases.
Authors:
Sten Wang <sten_wang@davicom.com.tw > : Original Author
Contributors:
- Marcelo Tosatti <marcelo@conectiva.com.br>
- Alan Cox <alan@lxorguk.ukuu.org.uk>
- Jeff Garzik <jgarzik@pobox.com>
- Vojtech Pavlik <vojtech@suse.cz>
|
