| Age | Commit message (Collapse) | Author |
|---|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230831140104.207019-1-azeemshaikh38@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
There is no need to pass the pointer to the kset in the struct
kset_uevent_ops callbacks as no one uses it, so just remove that pointer
entirely.
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Wedson Almeida Filho <wedsonaf@google.com>
Link: https://lore.kernel.org/r/20211227163924.3970661-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
syzbot can trigger the WARN() in init_uevent_argv() which isn't the
nicest as the code does properly recover and handle the error. So
change the WARN() call to pr_warn() and provide some more information on
what the buffer size that was needed.
Link: https://lore.kernel.org/r/20201107082206.GA19079@kroah.com
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: linux-kernel@vger.kernel.org
Reported-by: syzbot+92340f7b2b4789907fdb@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210405094852.1348499-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
syzbot is hitting use-after-free bug in uinput module [1]. This is because
kobject_uevent(KOBJ_REMOVE) is called again due to commit 0f4dafc0563c6c49
("Kobject: auto-cleanup on final unref") after memory allocation fault
injection made kobject_uevent(KOBJ_REMOVE) from device_del() from
input_unregister_device() fail, while uinput_destroy_device() is expecting
that kobject_uevent(KOBJ_REMOVE) is not called after device_del() from
input_unregister_device() completed.
That commit intended to catch cases where nobody even attempted to send
"remove" uevents. But there is no guarantee that an event will ultimately
be sent. We are at the point of no return as far as the rest of the kernel
is concerned; there are no repeats or do-overs.
Also, it is not clear whether some subsystem depends on that commit.
If no subsystem depends on that commit, it will be better to remove
the state_{add,remove}_uevent_sent logic. But we don't want to risk
a regression (in a patch which will be backported) by trying to remove
that logic. Therefore, as a first step, let's avoid the use-after-free bug
by making sure that kobject_uevent(KOBJ_REMOVE) won't be triggered twice.
[1] https://syzkaller.appspot.com/bug?id=8b17c134fe938bbddd75a45afaa9e68af43a362d
Reported-by: syzbot <syzbot+f648cfb7e0b52bf7ae32@syzkaller.appspotmail.com>
Analyzed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 0f4dafc0563c6c49 ("Kobject: auto-cleanup on final unref")
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is currently a missing terminating newline in non-switch case
match when msg == NULL
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Repalce printk with pr_warn in kobject_synth_uevent and replace
printk with pr_err in uevent_net_init to make both consistent with
other code in kobject_uevent.c
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a blank after declaration.
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no searon for u64 var cast to unsigned long long type.
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 07e98962fa77 ("kobject: Send hotplug events in all network namespaces")
enabled sending hotplug events into all network namespaces back in 2010.
Over time the set of uevents that get sent into all network namespaces has
shrunk. We have now reached the point where hotplug events for all devices
that carry a namespace tag are filtered according to that namespace.
Specifically, they are filtered whenever the namespace tag of the kobject
does not match the namespace tag of the netlink socket.
Currently, only network devices carry namespace tags (i.e. network
namespace tags). Hence, uevents for network devices only show up in the
network namespace such devices are created in or moved to.
However, any uevent for a kobject that does not have a namespace tag
associated with it will not be filtered and we will broadcast it into all
network namespaces. This behavior stopped making sense when user namespaces
were introduced.
This patch simplifies and fixes couple of things:
- Split codepath for sending uevents by kobject namespace tags:
1. Untagged kobjects - uevent_net_broadcast_untagged():
Untagged kobjects will be broadcast into all uevent sockets recorded
in uevent_sock_list, i.e. into all network namespacs owned by the
intial user namespace.
2. Tagged kobjects - uevent_net_broadcast_tagged():
Tagged kobjects will only be broadcast into the network namespace they
were tagged with.
Handling of tagged kobjects in 2. does not cause any semantic changes.
This is just splitting out the filtering logic that was handled by
kobj_bcast_filter() before.
Handling of untagged kobjects in 1. will cause a semantic change. The
reasons why this is needed and ok have been discussed in [1]. Here is a
short summary:
- Userspace ignores uevents from network namespaces that are not owned by
the intial user namespace:
Uevents are filtered by userspace in a user namespace because the
received uid != 0. Instead the uid associated with the event will be
65534 == "nobody" because the global root uid is not mapped.
This means we can safely and without introducing regressions modify the
kernel to not send uevents into all network namespaces whose owning
user namespace is not the initial user namespace because we know that
userspace will ignore the message because of the uid anyway.
I have a) verified that is is true for every udev implementation out
there b) that this behavior has been present in all udev
implementations from the very beginning.
- Thundering herd:
Broadcasting uevents into all network namespaces introduces significant
overhead.
All processes that listen to uevents running in non-initial user
namespaces will end up responding to uevents that will be meaningless
to them. Mainly, because non-initial user namespaces cannot easily
manage devices unless they have a privileged host-process helping them
out. This means that there will be a thundering herd of activity when
there shouldn't be any.
- Removing needless overhead/Increasing performance:
Currently, the uevent socket for each network namespace is added to the
global variable uevent_sock_list. The list itself needs to be protected
by a mutex. So everytime a uevent is generated the mutex is taken on
the list. The mutex is held *from the creation of the uevent (memory
allocation, string creation etc. until all uevent sockets have been
handled*. This is aggravated by the fact that for each uevent socket
that has listeners the mc_list must be walked as well which means we're
talking O(n^2) here. Given that a standard Linux workload usually has
quite a lot of network namespaces and - in the face of containers - a
lot of user namespaces this quickly becomes a performance problem (see
"Thundering herd" above). By just recording uevent sockets of network
namespaces that are owned by the initial user namespace we
significantly increase performance in this codepath.
- Injecting uevents:
There's a valid argument that containers might be interested in
receiving device events especially if they are delegated to them by a
privileged userspace process. One prime example are SR-IOV enabled
devices that are explicitly designed to be handed of to other users
such as VMs or containers.
This use-case can now be correctly handled since
commit 692ec06d7c92 ("netns: send uevent messages"). This commit
introduced the ability to send uevents from userspace. As such we can
let a sufficiently privileged (CAP_SYS_ADMIN in the owning user
namespace of the network namespace of the netlink socket) userspace
process make a decision what uevents should be sent. This removes the
need to blindly broadcast uevents into all user namespaces and provides
a performant and safe solution to this problem.
- Filtering logic:
This patch filters by *owning user namespace of the network namespace a
given task resides in* and not by user namespace of the task per se.
This means if the user namespace of a given task is unshared but the
network namespace is kept and is owned by the initial user namespace a
listener that is opening the uevent socket in that network namespace
can still listen to uevents.
- Fix permission for tagged kobjects:
Network devices that are created or moved into a network namespace that
is owned by a non-initial user namespace currently are send with
INVALID_{G,U}ID in their credentials. This means that all current udev
implementations in userspace will ignore the uevent they receive for
them. This has lead to weird bugs whereby new devices showing up in such
network namespaces were not recognized and did not get IPs assigned etc.
This patch adjusts the permission to the appropriate {g,u}id in the
respective user namespace. This way udevd is able to correctly handle
such devices.
- Simplify filtering logic:
do_one_broadcast() already ensures that only listeners in mc_list receive
uevents that have the same network namespace as the uevent socket itself.
So the filtering logic in kobj_bcast_filter is not needed (see [3]). This
patch therefore removes kobj_bcast_filter() and replaces
netlink_broadcast_filtered() with the simpler netlink_broadcast()
everywhere.
[1]: https://lkml.org/lkml/2018/4/4/739
[2]: https://lkml.org/lkml/2018/4/26/767
[3]: https://lkml.org/lkml/2018/4/26/738
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds alloc_uevent_skb() in preparation for follow up patches.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Synchronous pernet_operations are not allowed anymore.
All are asynchronous. So, drop the structure member.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a receive method to NETLINK_KOBJECT_UEVENT netlink sockets
to allow sending uevent messages into the network namespace the socket
belongs to.
Currently non-initial network namespaces are already isolated and don't
receive uevents. There are a number of cases where it is beneficial for a
sufficiently privileged userspace process to send a uevent into a network
namespace.
One such use case would be debugging and fuzzing of a piece of software
which listens and reacts to uevents. By running a copy of that software
inside a network namespace, specific uevents could then be presented to it.
More concretely, this would allow for easy testing of udevd/ueventd.
This will also allow some piece of software to run components inside a
separate network namespace and then effectively filter what that software
can receive. Some examples of software that do directly listen to uevents
and that we have in the past attempted to run inside a network namespace
are rbd (CEPH client) or the X server.
Implementation:
The implementation has been kept as simple as possible from the kernel's
perspective. Specifically, a simple input method uevent_net_rcv() is added
to NETLINK_KOBJECT_UEVENT sockets which completely reuses existing
af_netlink infrastructure and does neither add an additional netlink family
nor requires any user-visible changes.
For example, by using netlink_rcv_skb() we can make use of existing netlink
infrastructure to report back informative error messages to userspace.
Furthermore, this implementation does not introduce any overhead for
existing uevent generating codepaths. The struct netns got a new uevent
socket member that records the uevent socket associated with that network
namespace including its position in the uevent socket list. Since we record
the uevent socket for each network namespace in struct net we don't have to
walk the whole uevent socket list. Instead we can directly retrieve the
relevant uevent socket and send the message. At exit time we can now also
trivially remove the uevent socket from the uevent socket list. This keeps
the codepath very performant without introducing needless overhead and even
makes older codepaths faster.
Uevent sequence numbers are kept global. When a uevent message is sent to
another network namespace the implementation will simply increment the
global uevent sequence number and append it to the received uevent. This
has the advantage that the kernel will never need to parse the received
uevent message to replace any existing uevent sequence numbers. Instead it
is up to the userspace process to remove any existing uevent sequence
numbers in case the uevent message to be sent contains any.
Security:
In order for a caller to send uevent messages to a target network namespace
the caller must have CAP_SYS_ADMIN in the owning user namespace of the
target network namespace. Additionally, any received uevent message is
verified to not exceed size UEVENT_BUFFER_SIZE. This includes the space
needed to append the uevent sequence number.
Testing:
This patch has been tested and verified to work with the following udev
implementations:
1. CentOS 6 with udevd version 147
2. Debian Sid with systemd-udevd version 237
3. Android 7.1.1 with ueventd
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit adds struct uevent_sock to struct net. Since struct uevent_sock
records the position of the uevent socket in the uevent socket list we can
trivially remove it from the uevent socket list during cleanup. This speeds
up the old removal codepath.
Note, list_del() will hit __list_del_entry_valid() in its call chain which
will validate that the element is a member of the list. If it isn't it will
take care that the list is not modified.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
uevent_net_init() and uevent_net_exit() create and
destroy netlink socket, and these actions serialized
in netlink code.
Parallel execution with other pernet_operations
makes the socket disappear earlier from uevent_sock_list
on ->exit. As userspace can't be interested in broadcast
messages of dying net, and, as I see, no one in kernel
listen them, we may safely make uevent_net_ops async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We want the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The commit 4a336a23d619 ("kobject: copy env blob in one go") optimized
constructing uevent data for delivery over netlink by using the raw
environment buffer, instead of reconstructing it from individual
environment pointers. Unfortunately in doing so it broke suppressing
MODALIAS attribute for KOBJ_UNBIND events, as the code that suppressed this
attribute only adjusted the environment pointers, but left the buffer
itself alone. Let's fix it by making sure the offending attribute is
obliterated form the buffer as well.
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Reported-by: Casey Leedom <leedom@chelsio.com>
Fixes: 4a336a23d619 ("kobject: copy env blob in one go")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the SPDX tag is in all kobject files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the kobject files files with the correct SPDX license identifier
based on the license text in the file itself. The SPDX identifier is a
legally binding shorthand, which can be used instead of the full boiler
plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Just simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can build one skb and let it be cloned in netlink.
This is much faster, and use less memory (all clones will
share the same skb->head)
Tested:
time perf record (for f in `seq 1 3000` ; do ip netns add tast$f; done)
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 4.110 MB perf.data (~179584 samples) ]
real 0m24.227s # instead of 0m52.554s
user 0m0.329s
sys 0m23.753s # instead of 0m51.375s
14.77% ip [kernel.kallsyms] [k] __ip6addrlbl_add
14.56% ip [kernel.kallsyms] [k] netlink_broadcast_filtered
11.65% ip [kernel.kallsyms] [k] netlink_has_listeners
6.19% ip [kernel.kallsyms] [k] _raw_spin_lock_irqsave
5.66% ip [kernel.kallsyms] [k] kobject_uevent_env
4.97% ip [kernel.kallsyms] [k] memset_erms
4.67% ip [kernel.kallsyms] [k] refcount_sub_and_test
4.41% ip [kernel.kallsyms] [k] _raw_read_lock
3.59% ip [kernel.kallsyms] [k] refcount_inc_not_zero
3.13% ip [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore
1.55% ip [kernel.kallsyms] [k] __wake_up
1.20% ip [kernel.kallsyms] [k] strlen
1.03% ip [kernel.kallsyms] [k] __wake_up_common
0.93% ip [kernel.kallsyms] [k] consume_skb
0.92% ip [kernel.kallsyms] [k] netlink_trim
0.87% ip [kernel.kallsyms] [k] insert_header
0.63% ip [kernel.kallsyms] [k] unmap_page_range
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No need to iterate over strings, just copy in one efficient memcpy() call.
Tested:
time perf record "(for f in `seq 1 3000` ; do ip netns add tast$f; done)"
[ perf record: Woken up 10 times to write data ]
[ perf record: Captured and wrote 8.224 MB perf.data (~359301 samples) ]
real 0m52.554s # instead of 1m7.492s
user 0m0.309s
sys 0m51.375s # instead of 1m6.875s
9.88% ip [kernel.kallsyms] [k] netlink_broadcast_filtered
8.86% ip [kernel.kallsyms] [k] string
7.37% ip [kernel.kallsyms] [k] __ip6addrlbl_add
5.68% ip [kernel.kallsyms] [k] netlink_has_listeners
5.52% ip [kernel.kallsyms] [k] memcpy_erms
4.76% ip [kernel.kallsyms] [k] __alloc_skb
4.54% ip [kernel.kallsyms] [k] vsnprintf
3.94% ip [kernel.kallsyms] [k] format_decode
3.80% ip [kernel.kallsyms] [k] kmem_cache_alloc_node_trace
3.71% ip [kernel.kallsyms] [k] kmem_cache_alloc_node
3.66% ip [kernel.kallsyms] [k] kobject_uevent_env
3.38% ip [kernel.kallsyms] [k] strlen
2.65% ip [kernel.kallsyms] [k] _raw_spin_lock_irqsave
2.20% ip [kernel.kallsyms] [k] kfree
2.09% ip [kernel.kallsyms] [k] memset_erms
2.07% ip [kernel.kallsyms] [k] ___cache_free
1.95% ip [kernel.kallsyms] [k] kmem_cache_free
1.91% ip [kernel.kallsyms] [k] _raw_read_lock
1.45% ip [kernel.kallsyms] [k] ksize
1.25% ip [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore
1.00% ip [kernel.kallsyms] [k] widen_string
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This removes some #ifdef pollution and will ease follow up patches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current udev rules cause modules to be loaded on all device events save
for "remove". With the introduction of KOBJ_BIND/KOBJ_UNBIND this causes
issues, as driver modules that have devices bound to their drivers get
immediately reloaded, and it appears to the user that module unloading doe
snot work.
The standard udev matching rule is foillowing:
ENV{MODALIAS}=="?*", RUN{builtin}+="kmod load $env{MODALIAS}"
Given that MODALIAS data is not terribly useful for UNBIND event, let's zap
it from the generated uevent environment until we get userspace updated
with the correct udev rule that only loads modules on "add" event.
Reported-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Jakub Kicinski <kubakici@wp.pl>
Fixes: 1455cf8dbfd0 ("driver core: emit uevents when device is bound ...")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This merges the bind_unbind driver core feature into the
driver-core-next branch. bind_unbind is a branch so that others can
pull and work off of it safely.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are certain touch controllers that may come up in either normal
(application) or boot mode, depending on whether firmware/configuration is
corrupted when they are powered on. In boot mode the kernel does not create
input device instance (because it does not necessarily know the
characteristics of the input device in question).
Another number of controllers does not store firmware in a non-volatile
memory, and they similarly need to have firmware loaded before input device
instance is created. There are also other types of devices with similar
behavior.
There is a desire to be able to trigger firmware loading via udev, but it
has to happen only when driver is bound to a physical device (i2c or spi).
These udev actions can not use ADD events, as those happen too early, so we
are introducing BIND and UNBIND events that are emitted at the right
moment.
Also, many drivers create additional driver-specific device attributes
when binding to the device, to provide userspace with additional controls.
The new events allow userspace to adjust these driver-specific attributes
without worrying that they are not there yet.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch makes it possible to pass additional arguments in addition
to uevent action name when writing /sys/.../uevent attribute. These
additional arguments are then inserted into generated synthetic uevent
as additional environment variables.
Before, we were not able to pass any additional uevent environment
variables for synthetic uevents. This made it hard to identify such uevents
properly in userspace to make proper distinction between genuine uevents
originating from kernel and synthetic uevents triggered from userspace.
Also, it was not possible to pass any additional information which would
make it possible to optimize and change the way the synthetic uevents are
processed back in userspace based on the originating environment of the
triggering action in userspace. With the extra additional variables, we are
able to pass through this extra information needed and also it makes it
possible to synchronize with such synthetic uevents as they can be clearly
identified back in userspace.
The format for writing the uevent attribute is following:
ACTION [UUID [KEY=VALUE ...]
There's no change in how "ACTION" is recognized - it stays the same
("add", "change", "remove"). The "ACTION" is the only argument required
to generate synthetic uevent, the rest of arguments, that this patch
adds support for, are optional.
The "UUID" is considered as transaction identifier so it's possible to
use the same UUID value for one or more synthetic uevents in which case
we logically group these uevents together for any userspace listeners.
The "UUID" is expected to be in "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
format where "x" is a hex digit. The value appears in uevent as
"SYNTH_UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" environment variable.
The "KEY=VALUE" pairs can contain alphanumeric characters only. It's
possible to define zero or more more pairs - each pair is then delimited
by a space character " ". Each pair appears in synthetic uevents as
"SYNTH_ARG_KEY=VALUE" environment variable. That means the KEY name gains
"SYNTH_ARG_" prefix to avoid possible collisions with existing variables.
To pass the "KEY=VALUE" pairs, it's also required to pass in the "UUID"
part for the synthetic uevent first.
If "UUID" is not passed in, the generated synthetic uevent gains
"SYNTH_UUID=0" environment variable automatically so it's possible to
identify this situation in userspace when reading generated uevent and so
we can still make a difference between genuine and synthetic uevents.
Signed-off-by: Peter Rajnoha <prajnoha@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the first case, rename the second variable to correspond to the name
found in the function parameter list.
In the remaining cases, reorder the variables to correspond to their order
in the parameter list.
Issue detected using Coccinelle (http://coccinelle.lip6.fr/)
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The file doesn't seem to use anything from linux/user_namespace.h, and
removing it yields byte-identical object code and strictly fewer
dependencies in the .cmd file.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Support for uevent_helper, aka hotplug, is not required on many systems
these days but it can still be enabled via sysfs or sysctl.
Reported-by: Darren Shepherd <darren.s.shepherd@gmail.com>
Signed-off-by: Michael Marineau <mike@marineau.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently kobject_uevent has somewhat unpredictable semantics. The
point is, since it may call a usermode helper and wait for it to execute
(UMH_WAIT_EXEC), it is impossible to say for sure what lock dependencies
it will introduce for the caller - strictly speaking it depends on what
fs the binary is located on and the set of locks fork may take. There
are quite a few kobject_uevent's users that do not take this into
account and call it with various mutexes taken, e.g. rtnl_mutex,
net_mutex, which might potentially lead to a deadlock.
Since there is actually no reason to wait for the usermode helper to
execute there, let's make kobject_uevent start the helper asynchronously
with the aid of the UMH_NO_WAIT flag.
Personally, I'm interested in this, because I really want kobject_uevent
to be called under the slab_mutex in the slub implementation as it used
to be some time ago, because it greatly simplifies synchronization and
automatically fixes a kmemcg-related race. However, there was a
deadlock detected on an attempt to call kobject_uevent under the
slab_mutex (see https://lkml.org/lkml/2012/1/14/45), which was reported
to be fixed by releasing the slab_mutex for kobject_uevent.
Unfortunately, there was no information about who exactly blocked on the
slab_mutex causing the usermode helper to stall, neither have I managed
to find this out or reproduce the issue.
BTW, this is not the first attempt to make kobject_uevent use
UMH_NO_WAIT. Previous one was made by commit f520360d93cd ("kobject:
don't block for each kobject_uevent"), but it was wrong (it passed
arguments allocated on stack to async thread) so it was reverted in
05f54c13cd0c ("Revert "kobject: don't block for each kobject_uevent".").
It targeted on speeding up the boot process though.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Greg KH <greg@kroah.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When I create a new namespace with 'ip netns add net0', or add/remove
new links in a namespace with 'ip link add/delete type veth', rx/tx
queues events can be got in all namespaces. That is because rx/tx queue
ktypes do not have namespace support, and their kobj parents are setted to
NULL. This patch is to fix it.
Reported-by: Libo Chen <chenlibo@huawei.com>
Signed-off-by: Libo Chen <chenlibo@huawei.com>
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch defines netlink_kernel_create as a wrapper function of
__netlink_kernel_create to hide the struct module *me parameter
(which seems to be THIS_MODULE in all existing netlink subsystems).
Suggested by David S. Miller.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace netlink_set_nonroot by one new field `flags' in
struct netlink_kernel_cfg that is passed to netlink_kernel_create.
This patch also renames NL_NONROOT_* to NL_CFG_F_NONROOT_* since
now the flags field in nl_table is generic (so we can add more
flags if needed in the future).
Also adjust all callers in the net-next tree to use these flags
instead of netlink_set_nonroot.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the following structure:
struct netlink_kernel_cfg {
unsigned int groups;
void (*input)(struct sk_buff *skb);
struct mutex *cb_mutex;
};
That can be passed to netlink_kernel_create to set optional configurations
for netlink kernel sockets.
I've populated this structure by looking for NULL and zero parameters at the
existing code. The remaining parameters that always need to be set are still
left in the original interface.
That includes optional parameters for the netlink socket creation. This allows
easy extensibility of this interface in the future.
This patch also adapts all callers to use this new interface.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull cleanup of fs/ and lib/ users of module.h from Paul Gortmaker:
"Fix up files in fs/ and lib/ dirs to only use module.h if they really
need it.
These are trivial in scope vs the work done previously. We now have
things where any few remaining cleanups can be farmed out to arch or
subsystem maintainers, and I have done so when possible. What is
remaining here represents the bits that don't clearly lie within a
single arch/subsystem boundary, like the fs dir and the lib dir.
Some duplicate includes arising from overlapping fixes from
independent subsystem maintainer submissions are also quashed."
Fix up trivial conflicts due to clashes with other include file cleanups
(including some due to the previous bug.h cleanup pull).
* tag 'module-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
lib: reduce the use of module.h wherever possible
fs: reduce the use of module.h wherever possible
includecheck: delete any duplicate instances of module.h
|
|
The queue handling in the udev daemon assumes that the events are
ordered.
Before this patch uevent_seqnum is incremented under sequence_lock,
than an event is send uner uevent_sock_mutex. I want to say that code
contained a window between incrementing seqnum and sending an event.
This patch locks uevent_sock_mutex before incrementing uevent_seqnum.
v2: delete sequence_lock, uevent_seqnum is protected by uevent_sock_mutex
v3: unlock the mutex before the goto exit
Thanks for Kay for the comments.
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Tested-By: Kay Sievers <kay.sievers@vrfy.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map
them onto including export.h -- or if the file isn't even
using those, then just delete the include. Fix up any implicit
include dependencies that were being masked by module.h along
the way.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
Most network namespaces unlikely have listeners to uevents, and should
benefit from skipping all the string copies.
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
kobject_uevent() uses a multicast socket and should ignore
if one of listeners cannot handle messages or nobody is
listening at all.
Easily reproducible when a process in system is cloned
with CLONE_NEWNET flag.
(See also http://article.gmane.org/gmane.linux.kernel.device-mapper.dm-crypt/5256)
Signed-off-by: Milan Broz <mbroz@redhat.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
s/ending/sending, s/kobject_uevent()/kobject_uevent_env() in the comments.
Signed-off-by: Xiaotian Feng <xtfeng@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
There is a kfree(ue_sk) missing on the error path if
netlink_kernel_create() fails.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
lib/kobject_uevent.c:87: warning: 'kobj_bcast_filter' defined but not used
Repairs "hotplug: netns aware uevent_helper"
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
It only makes sense for uevent_helper to get events
in the intial namespaces. It's invocation is not
per namespace and it is not clear how we could make
it's invocation namespace aware.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Utilize netlink_broacast_filtered to allow sending hotplug events
in the proper namespace.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Open a copy of the uevent kernel socket in each network
namespace so we can send uevents in all network namespaces.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
Constify struct kset_uevent_ops.
This is part of the ops structure constification
effort started by Arjan van de Ven et al.
Benefits of this constification:
* prevents modification of data that is shared
(referenced) by many other structure instances
at runtime
* detects/prevents accidental (but not intentional)
modification attempts on archs that enforce
read-only kernel data at runtime
* potentially better optimized code as the compiler
can assume that the const data cannot be changed
* the compiler/linker move const data into .rodata
and therefore exclude them from false sharing
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Users can read sysfs files, there is no reason they should not be
allowed to listen to uevents. This lets xorg and other userspace
programs properly get these messages without having to be root.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This reverts commit f520360d93cdc37de5d972dac4bf3bdef6a7f6a7.
Tetsuo Handa, running a kernel with CONFIG_DEBUG_PAGEALLOC=y and
CONFIG_UEVENT_HELPER_PATH=/sbin/hotplug, has been hitting RCU detected
CPU stalls: it's been spinning in the loop where do_execve() counts up
the args (but why wasn't fixup_exception working? dunno).
The recent change, switching kobject_uevent_env() from UMH_WAIT_EXEC
to UMH_NO_WAIT, is broken: the exec uses args on the local stack here,
and an env which is kfreed as soon as call_usermodehelper() returns.
It very much needs to wait for the exec to be done.
An alternative would be to keep the UMH_NO_WAIT, and complicate the code
to allocate and free these resources correctly? but no, as GregKH
pointed out when making the commit, CONFIG_UEVENT_HELPER_PATH="" is a
much better optimization - though some distros are still saying
/sbin/hotplug in their .config, yet with no such binary in their initrd
or their root.
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Conflicts:
drivers/net/wimax/i2400m/usb-notif.c
|
Azeem Shaikh
Greg Kroah-Hartman
Tetsuo Handa
Bo YU
Christian Brauner
Kirill Tkhai
Dmitry Torokhov
David S. Miller
Eric Dumazet
Peter Rajnoha
Julia Lawall
Rasmus Villemoes
Michael Marineau
Vladimir Davydov
Weilong Chen
Pablo Neira Ayuso
Linus Torvalds
Andrew Vagin
Paul Gortmaker
Kay Sievers
Milan Broz
Xiaotian Feng
Dan Carpenter
Andrew Morton
Eric W. Biederman
Tejun Heo
Emese Revfy
Hugh Dickins