| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Commit 8d36694245f2 ("PM: QoS: Add check to make sure CPU freq is
non-negative") makes sure CPU freq is non-negative to avoid negative
value converting to unsigned data type. However, when the value is
PM_QOS_DEFAULT_VALUE, pm_qos_update_target specifically uses
c->default_value which is set to FREQ_QOS_MIN/MAX_DEFAULT_VALUE when
cpufreq_policy_alloc is executed, for this case handling.
Adding check for PM_QOS_DEFAULT_VALUE to let default setting work will
fix this problem.
Fixes: 8d36694245f2 ("PM: QoS: Add check to make sure CPU freq is non-negative")
Link: https://lore.kernel.org/lkml/20230626035144.19717-1-Chung-kai.Yang@mediatek.com/
Link: https://lore.kernel.org/lkml/20230627071727.16646-1-Chung-kai.Yang@mediatek.com/
Link: https://lore.kernel.org/lkml/CAJZ5v0gxNOWhC58PHeUhW_tgf6d1fGJVZ1x91zkDdht11yUv-A@mail.gmail.com/
Signed-off-by: Chungkai Yang <Chung-kai.Yang@mediatek.com>
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CPU frequency should never be negative.
If some client driver calls freq_qos_update_request with a
negative value which will be very high in absolute terms,
then frequency QoS sets max CPU freq at fmax as it considers
it's absolute value but it will add plist node with negative
priority.
plist node has priority from INT_MIN (highest) to INT_MAX(lowest).
Once priority is set as negative, another client will not be able
to reduce CPU frequency.
Adding check to make sure CPU freq is non-negative will fix
this problem.
Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
The target_value field in struct pm_qos_constraints is used for
lockless access to the effective constraint value of a given QoS
list, so the readers of it cannot expect it to always reflect the
most recent effective constraint value. However, they can and do
expect it to be equal to a valid effective constraint value computed
at a certain time in the past (event though it may not be the most
recent one), so add READ|WRITE_ONCE() annotations around the
target_value accesses to prevent the compiler from possibly causing
that expectation to be unmet by generating code in an exceptionally
convoluted way.
Signed-off-by: Qian Cai <cai@lca.pw>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Because cpuidle is the only user of the effective constraint coming
from the CPU latency QoS, add #ifdef CONFIG_CPU_IDLE around that code
to avoid building it unnecessarily.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
Update the file information comments in include/linux/pm_qos.h
and kernel/power/qos.c by adding titles along with copyright and
authors information to them and changing the qos.c description to
better reflect its contents (outdated information is dropped from
it in particular).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
Drop the PM QoS classes enum including PM_QOS_CPU_DMA_LATENCY,
drop the wrappers around pm_qos_request(), pm_qos_request_active(),
and pm_qos_add/update/remove_request() introduced previously, rename
these functions, respectively, to cpu_latency_qos_limit(),
cpu_latency_qos_request_active(), and
cpu_latency_qos_add/update/remove_request(), and update their
kerneldoc comments. [While at it, drop some useless comments from
these functions.]
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
Change the return type of pm_qos_request() to be the same as the
one of pm_qos_read_value() called by it internally and stop exporting
it to modules (because its only caller, cpuidle, is not modular).
Also move the pm_qos_read_value() header away from the CPU latency
QoS API function headers in pm_qos.h (because it technically does
not belong to that API).
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
Modify the definitions of the CPU latency QoS trace events to take
one argument (since PM_QOS_CPU_DMA_LATENCY is always passed as the
pm_qos_class argument to them) and update the documentation of them
accordingly (while at it, make it explicitly mention CPU latency QoS
and relocate it after the device PM QoS trace events documentation).
The names and output format of the trace events do not change to
preserve user space compatibility.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
First, rename PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE to
PM_QOS_CPU_LATENCY_DEFAULT_VALUE and update all of the code
referring to it accordingly.
Next, rename cpu_dma_constraints to cpu_latency_constraints, move
the definition of it closer to the functions referring to it and
update all of them accordingly. [While at it, add a comment to mark
the start of the code related to the CPU latency QoS.]
Finally, rename the pm_qos_power_*() family of functions and
pm_qos_power_fops to cpu_latency_qos_*() and cpu_latency_qos_fops,
respectively, and update the definition of cpu_latency_qos_miscdev.
[While at it, update the miscdev interface code start comment.]
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
Notice that pm_qos_remove_notifier() is not used at all and the only
caller of pm_qos_add_notifier() is the cpuidle core, which only needs
the PM_QOS_CPU_DMA_LATENCY notifier to invoke wake_up_all_idle_cpus()
upon changes of the PM_QOS_CPU_DMA_LATENCY target value.
First, to ensure that wake_up_all_idle_cpus() will be called
whenever the PM_QOS_CPU_DMA_LATENCY target value changes, modify the
pm_qos_add/update/remove_request() family of functions to check if
the effective constraint for the PM_QOS_CPU_DMA_LATENCY has changed
and call wake_up_all_idle_cpus() directly in that case.
Next, drop the PM_QOS_CPU_DMA_LATENCY notifier from cpuidle as it is
not necessary any more.
Finally, drop both pm_qos_add_notifier() and pm_qos_remove_notifier(),
as they have no callers now, along with cpu_dma_lat_notifier which is
only used by them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
First, change the definition of struct pm_qos_request so that it
contains a struct pm_qos_constraints pointer (called "qos") instead
of a PM QoS class number (in preparation for dropping the PM QoS
classes concept altogether going forward) and move its definition
(along with the definition of struct pm_qos_flags_request that does
not change) after the definition of struct pm_qos_constraints.
Next, drop the definition of struct pm_qos_object and the null_pm_qos
and cpu_dma_pm_qos variables of that type along with pm_qos_array[]
holding pointers to them and change the code to refer to the
pm_qos_constraints structure directly or to use the new qos pointer
in struct pm_qos_request for that instead of going through
pm_qos_array[] to access it. Also update kerneldoc comments that
mention pm_qos_class to refer to PM_QOS_CPU_DMA_LATENCY directly
instead.
Finally, drop register_pm_qos_misc(), introduce cpu_latency_qos_miscdev
(with the name field set to "cpu_dma_latency") to implement the
CPU latency QoS interface in /dev/ and register it directly from
pm_qos_power_init().
After these changes the notion of PM QoS classes remains only in the
API (in the form of redundant function parameters that are ignored)
and in the definitions of PM QoS trace events.
While at it, some redundant local variables are dropped etc.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
Reorder the code to avoid using extra function header declarations
for the pm_qos_power_*() family of functions and drop those
declarations.
Also clean up the internals of those functions to consolidate checks,
avoid using redundant local variables and similar.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
After commit c3082a674f46 ("PM: QoS: Get rid of unused flags") the
only global PM QoS class in use is PM_QOS_CPU_DMA_LATENCY, so it
does not really make sense to iterate over global QoS classes
anywhere, since there is only one.
Remove iterations over global QoS classes from the code and use
PM_QOS_CPU_DMA_LATENCY as the target class directly where needed.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
Move the definition of pm_qos_read_value() before the one of
pm_qos_get_value() and add a kerneldoc comment to it (as it is
not static).
Also replace the BUG() in pm_qos_get_value() with WARN() (to
prevent the kernel from crashing if an unknown PM QoS type is
used by mistake) and drop the comment next to it that is not
necessary any more.
Additionally, drop the unnecessary inline modifier from the header
of pm_qos_set_value().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
Clean up the pm_qos_update_target() function:
* Update its kerneldoc comment.
* Drop the redundant ret local variable from it.
* Reorder definitions of local variables in it.
* Update a comment in it.
Also update the kerneldoc comment of pm_qos_update_flags() (e.g.
notifiers are not called by it any more) and add one emtpy line
to its body (for more visual clarity).
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
The PM_QOS_SUM QoS type is not used, so drop it along with the
code referring to it in pm_qos_get_value() and the related local
variables in there.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
The pm_qos_update_request_timeout() function is not called from
anywhere, so drop it along with the work member in struct
pm_qos_request needed by it.
Also drop the useless pm_qos_update_request_timeout trace event
that is only triggered by that function (so it never triggers at
all) and update the trace events documentation accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
|
|
After commit c3082a674f46 ("PM: QoS: Get rid of unused flags") the
only global PM QoS class in use is PM_QOS_CPU_DMA_LATENCY and the
existing PM QoS debugfs interface has become overly complicated (as
it takes other potentially possible PM QoS classes that are not there
any more into account). It is also not particularly useful (the
"type" of the PM_QOS_CPU_DMA_LATENCY is known, its aggregate value
can be read from /dev/cpu_dma_latency and the number of requests in
the queue does not really matter) and there are no known users
depending on it. Moreover, there are dedicated trace events that
can be used for tracking PM QoS usage with much higher precision.
For these reasons, drop the PM QoS debugfs interface altogether.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Support for adding per-device frequency limits was removed in
commit 2aac8bdf7a0f ("PM: QoS: Drop frequency QoS types from device PM QoS")
after cpufreq switched to use a new "freq_constraints" construct.
Restore support for per-device freq limits but base this upon
freq_constraints. This is primarily meant to be used by the devfreq
subsystem.
This removes the "static" marking on freq_qos_apply but does not export
it for modules.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Switching cpufreq drivers (or switching operation modes of the
intel_pstate driver from "active" to "passive" and vice versa)
does not work on some x86 systems with ACPI after commit
3000ce3c52f8 ("cpufreq: Use per-policy frequency QoS"), because
the ACPI _PPC and thermal code uses the same frequency QoS request
object for a given CPU every time a cpufreq driver is registered
and freq_qos_remove_request() does not invalidate the request after
removing it from its QoS list, so freq_qos_add_request() complains
and fails when that request is passed to it again.
Fix the issue by modifying freq_qos_remove_request() to clear the qos
and type fields of the frequency request pointed to by its argument
after removing it from its QoS list so as to invalidate it.
Fixes: 3000ce3c52f8 ("cpufreq: Use per-policy frequency QoS")
Reported-and-tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Introduce frequency QoS, based on the "raw" low-level PM QoS, to
represent min and max frequency requests and aggregate constraints.
The min and max frequency requests are to be represented by
struct freq_qos_request objects and the aggregate constraints are to
be represented by struct freq_constraints objects. The latter are
expected to be initialized with the help of freq_constraints_init().
The freq_qos_read_value() helper is defined to retrieve the aggregate
constraints values from a given struct freq_constraints object and
there are the freq_qos_add_request(), freq_qos_update_request() and
freq_qos_remove_request() helpers to manipulate the min and max
frequency requests. It is assumed that the the helpers will not
run concurrently with each other for the same struct freq_qos_request
object, so if that may be the case, their uses must ensure proper
synchronization between them (e.g. through locking).
In addition, freq_qos_add_notifier() and freq_qos_remove_notifier()
are provided to add and remove notifiers that will trigger on aggregate
constraint changes to and from a given struct freq_constraints object,
respectively.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The network_latency and network_throughput flags for PM-QoS have not
found much use in drivers or in userspace since they were introduced.
Commit 4a733ef1bea7 ("mac80211: remove PM-QoS listener") removed the
only user PM_QOS_NETWORK_LATENCY in the kernel a while ago and there
don't seem to be any userspace tools using the character device files
either.
PM_QOS_MEMORY_BANDWIDTH was never even added to the trace events.
Remove all the flags except cpu_dma_latency.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The extra forward declaration of pm_qos_get_value() is redundant, so
drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Convert printks to pr_<level>.
Miscellanea:
o Use pr_fmt with "PM:" and remove "PM: " from format strings
o Coalesce format strings and realign format arguments
o Convert an embedded incorrect function name to "%s: ", __func__
o Convert a couple multi-line formats to multiple pr_<level> calls
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Now that workqueue can handle work item queueing/cancelling from very
early during boot, there is no need to gate cancel_delayed_work_sync()
while !keventd_up(). Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Qiao Zhou <qiaozhou@asrmicro.com>
|
|
of_clk_init() ends up calling into pm_qos_update_request() very early
during boot where irq is expected to stay disabled.
pm_qos_update_request() uses cancel_delayed_work_sync() which
correctly assumes that irq is enabled on invocation and
unconditionally disables and re-enables it.
Gate cancel_delayed_work_sync() invocation with kevented_up() to avoid
enabling irq unexpectedly during early boot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Qiao Zhou <qiaozhou@asrmicro.com>
Link: http://lkml.kernel.org/r/d2501c4c-8e7b-bea3-1b01-000b36b5dfe9@asrmicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PM QoS requests are notoriously hard to debug and made even
more so due to their highly dynamic nature. Having visibility
into the internal data representation per constraint allows
us to have much better appreciation of potential issues or
bad usage by drivers in the system.
So introduce for all classes of PM QoS, an entry in
/sys/kernel/debug/pm_qos that shall show all the current
requests as well as the snapshot of the value these requests
boil down to. For example:
==> /sys/kernel/debug/pm_qos/cpu_dma_latency <==
1: 4444: Active
2: 2000000000: Default
3: 2000000000: Default
4: 2000000000: Default
Type=Minimum, Value=4444, Requests: active=1 / total=4
==> /sys/kernel/debug/pm_qos/memory_bandwidth <==
Empty!
...
The actual value listed will have their meaning based
on the QoS it is on, the 'Type' indicates what logic
it would use to collate the information - Minimum,
Maximum, or Sum. Value is the collation of all requests.
This interface also compares the values with the defaults
for the QoS class and marks the ones that are
currently active.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Also adds a class type PM_QOS_SUM that aggregates the values by summing them.
It can be used by memory controllers to calculate the optimum clock frequency
based on the bandwidth needs of the different memory clients.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a new latency tolerance device PM QoS type to be use for
specifying active state (RPM_ACTIVE) memory access (DMA) latency
tolerance requirements for devices. It may be used to prevent
hardware from choosing overly aggressive energy-saving operation
modes (causing too much latency to appear) for the whole platform.
This feature reqiures hardware support, so it only will be
available for devices having a new .set_latency_tolerance()
callback in struct dev_pm_info populated, in which case the
routine pointed to by it should implement whatever is necessary
to transfer the effective requirement value to the hardware.
Whenever the effective latency tolerance changes for the device,
its .set_latency_tolerance() callback will be executed and the
effective value will be passed to it. If that value is negative,
which means that the list of latency tolerance requirements for
the device is empty, the callback is expected to switch the
underlying hardware latency tolerance control mechanism to an
autonomous mode if available. If that value is PM_QOS_LATENCY_ANY,
in turn, and the hardware supports a special "no requirement"
setting, the callback is expected to use it. That allows software
to prevent the hardware from automatically updating the device's
latency tolerance in response to its power state changes (e.g. during
transitions from D3cold to D0), which generally may be done in the
autonomous latency tolerance control mode.
If .set_latency_tolerance() is present for the device, a new
pm_qos_latency_tolerance_us attribute will be present in the
devivce's power directory in sysfs. Then, user space can use
that attribute to specify its latency tolerance requirement for
the device, if any. Writing "any" to it means "no requirement, but
do not let the hardware control latency tolerance" and writing
"auto" to it allows the hardware to be switched to the autonomous
mode if there are no other requirements from the kernel side in the
device's list.
This changeset includes a fix from Mika Westerberg.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a new field, no_constraints_value, to struct pm_qos_constraints
representing a list of PM QoS constraint requests to be returned by
pm_qos_get_value() when that list of requests is empty.
That field will be equal to default_value for all of the existing
global PM QoS classes and for the resume latency device PM QoS type,
but it will be different from default_value for the new latency
tolerance device PM QoS type introduced by the next changeset.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Let kstrtos32_from_user() do the necessary calls and checks.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
pm_qos_update_request_timeout() updates a qos and then schedules
a delayed work item to bring the qos back down to the default
after the timeout. When the work item runs, pm_qos_work_fn() will
call pm_qos_update_request() and deadlock because it tries to
cancel itself via cancel_delayed_work_sync(). Future callers of
that qos will also hang waiting to cancel the work that is
canceling itself. Let's extract the little bit of code that does
the real work of pm_qos_update_request() and call it from the
work function so that we don't deadlock.
Before ed1ac6e (PM: don't use [delayed_]work_pending()) this didn't
happen because the work function wouldn't try to cancel itself.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Adds tracepoints to pm_qos_add_request, pm_qos_update_request,
pm_qos_remove_request, and pm_qos_update_request_timeout.
It's useful for checking pm_qos_class, value, and timeout_us.
Signed-off-by: Sahara <keun-o.park@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This patch adds tracepoints to pm_qos_update_target and
pm_qos_update_flags. It's useful for checking pm qos action,
previous value and current value.
Signed-off-by: Sahara <keun-o.park@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The valid start index for pm_qos_array is not 0, but
PM_QOS_CPU_DMA_LATENCY. There is a null_pm_qos at index 0 of
pm_qos_array. However, null_pm_qos is not created as misc device so
that inclusion of 0 index for checking pm_qos_class especially for
file operations is not proper here.
[rjw: Changelog, a bit]
Signed-off-by: Sahara <keun-o.park@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There's no need to test whether a (delayed) work item is pending
before queueing, flushing or cancelling it, so remove work_pending()
tests used in those cases.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* pm-sleep:
PM / Freezer: Fixup compile error of try_to_freeze_nowarn()
driver core / PM: move the calling to device_pm_remove behind the calling to bus_remove_device
PM / Hibernate: use rb_entry
PM / sysfs: replace strict_str* with kstrto*
|
|
Replace strict_strtoul() with kstrtoul() in pm_async_store() and
pm_qos_power_write().
[rjw: Modified subject and changelog.]
Signed-off-by: Daniel Walter <sahne@0x90.at>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce struct pm_qos_flags_request and struct pm_qos_flags
representing PM QoS flags request type and PM QoS flags constraint
type, respectively. With these definitions the data structures
will be arranged so that the list member of a struct pm_qos_flags
object will contain the head of a list of struct pm_qos_flags_request
objects representing all of the "flags" requests present for the
given device. Then, the effective_flags member of a struct
pm_qos_flags object will contain the bitwise OR of the flags members
of all the struct pm_qos_flags_request objects in the list.
Additionally, introduce helper function pm_qos_update_flags()
allowing the caller to manage the list of struct pm_qos_flags_request
pointed to by the list member of struct pm_qos_flags.
The flags are of type s32 so that the request's "value" field
is always of the same type regardless of what kind of request it
is (latency requests already have value fields of type s32).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Acked-by: mark gross <markgross@thegnar.org>
|
|
pm_qos_get_value don't return a return code in all cases. It's sure that
anything interesting happend after BUG() but this prevent any compilation
warning.
[rjw: Chaneged the new return value to PM_QOS_DEFAULT_VALUE.]
Signed-off-by: Luis Gonzalez Fernandez <luisgf@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
The new API, pm_qos_update_request_timeout() is to provide a timeout
with pm_qos_update_request.
For example, pm_qos_update_request_timeout(req, 100, 1000), means that
QoS request on req with value 100 will be active for 1000 microseconds.
After 1000 microseconds, the QoS request thru req is reset. If there
were another pm_qos_update_request(req, x) during the 1000 us, this
new request with value x will override as this is another request on the
same req handle. A new request on the same req handle will always
override the previous request whether it is the conventional request or
it is the new timeout request.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Gross <markgross@thegnar.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
- Replace class ID #define with enumeration
- Loop through PM QoS objects during initialization (rather than
initializing them one-by-one)
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-by: Antti Miettinen <amiettinen@nvidia.com>
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
Reviewed-by: Scott Williams <scwilliams@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
Acked-by: markgross <markgross@thegnar.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Since commit 4a31a334, the name of this misc device is not initialized,
which leads to a funny device named /dev/(null) being created and
/proc/misc containing an entry with just a number but no name. The latter
leads to complaints by cryptsetup, which caused me to investigate this
matter.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
Revert "tracing: Include module.h in define_trace.h"
irq: don't put module.h into irq.h for tracking irqgen modules.
bluetooth: macroize two small inlines to avoid module.h
ip_vs.h: fix implicit use of module_get/module_put from module.h
nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
include: replace linux/module.h with "struct module" wherever possible
include: convert various register fcns to macros to avoid include chaining
crypto.h: remove unused crypto_tfm_alg_modname() inline
uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
pm_runtime.h: explicitly requires notifier.h
linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
miscdevice.h: fix up implicit use of lists and types
stop_machine.h: fix implicit use of smp.h for smp_processor_id
of: fix implicit use of errno.h in include/linux/of.h
of_platform.h: delete needless include <linux/module.h>
acpi: remove module.h include from platform/aclinux.h
miscdevice.h: delete unnecessary inclusion of module.h
device_cgroup.h: delete needless include <linux/module.h>
net: sch_generic remove redundant use of <linux/module.h>
net: inet_timewait_sock doesnt need <linux/module.h>
...
Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
- drivers/media/dvb/frontends/dibx000_common.c
- drivers/media/video/{mt9m111.c,ov6650.c}
- drivers/mfd/ab3550-core.c
- include/linux/dmaengine.h
|
Bruce Ashfield
Chungkai Yang
Shivnandan Kumar
Gustavo A. R. Silva
Qian Cai
Rafael J. Wysocki
Leonard Crestez
Amit Kucheria
Thomas Gleixner
Greg Kroah-Hartman
Yangtao Li
Gustavo A. R. Silva
Joe Perches
Tejun Heo
Nishanth Menon
Tomeu Vizoso
Andy Shevchenko
Stephen Boyd
Sahara
Daniel Walter
Luis Gonzalez Fernandez
MyungJoo Ham
Alex Frid
Dominik Brodowski
Linus Torvalds