aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/core/hub.c
AgeCommit message (Expand)Author
2021-12-08usb: hub: Fix locking issues with address0_mutexMathias Nyman
2021-12-08usb: hub: Fix usb enumeration issue due to address0 raceMathias Nyman
2021-07-28usb: hub: Disable USB 3 device initiated lpm if exit latency is too highMathias Nyman
2021-06-30usb: core: hub: Disable autosuspend for Cypress CY7C65632Andrew Lunn
2021-05-22usb: core: hub: fix race condition about TRSMRCY of resumeChunfeng Yun
2020-05-20usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534BEugeniu Rosca
2020-05-02USB: hub: Fix handling of connect changes during sleepAlan Stern
2020-03-11usb: core: hub: do error out if usb_autopm_get_interface() failsEugeniu Rosca
2020-03-11usb: core: hub: fix unhandled return by employing a void functionEugeniu Rosca
2020-02-28USB: hub: Fix the broken detection of USB3 device in SMSC hubHardik Gajjar
2020-02-28USB: hub: Don't record a connect-change event during reset-resumeAlan Stern
2020-01-23usb: core: hub: Improved device recognition on remote wakeupKeiya Nobuta
2019-12-17usb: Allow USB device to be warm reset in suspended stateKai-Heng Feng
2019-11-06usb: handle warm-reset port requests on hub resumeJan-Marek Glogowski
2019-07-31usb: core: hub: Disable hub-initiated U1/U2Thinh Nguyen
2019-07-31usb: Handle USB3 remote wakeup for LPM enabled devices correctlyLee, Chiasheng
2019-05-31USB: core: Don't unbind interfaces following device reset failureAlan Stern
2019-05-02USB: Consolidate LPM checks to avoid enabling LPM twiceKai-Heng Feng
2019-05-02USB: Add new USB LPM helpersKai-Heng Feng
2019-02-12usb: hub: delay hub autosuspend if USB3 port is still link trainingMathias Nyman
2018-12-13USB: check usb_get_extra_descriptor for proper sizeMathias Payer
2018-12-01usb: core: Fix hub port connection events lostDennis Wassenberg
2018-08-03usb: hub: Don't wait for connect state at resume for powered-off portsDominik Bozek
2018-07-28usb: core: handle hub C_PORT_OVER_CURRENT conditionBin Liu
2018-07-03usb: do not reset if a low-speed or full-speed device timed outMaxim Moseychuk
2018-05-01USB: Increment wakeup count on remote wakeup.Ravi Chandra Sadineni
2017-12-10usb: hub: Cycle HUB power when initialization failsMike Looijmans
2017-10-19usb: hub: Allow reset retry for USB2 devices on connect bounceMathias Nyman
2017-09-18usb: Increase quirk delay for USB devicesDmitry Fleytman
2017-08-16usb: Increase root hub reset signaling time to prevent retryMathias Nyman
2017-08-14Merge 4.13-rc5 into usb-nextGreg Kroah-Hartman
2017-08-10USB: Check for dropped connection before switching to full speedAlan Stern
2017-07-22usb: core: hub: controller driver name may be NULLPeter Chen
2017-06-29USB hub_probe: rework ugly goto-into-compound-statementEugene Korenevsky
2017-06-15usb: Avoid unnecessary LPM enabling and disabling during suspend and resumeMathias Nyman
2017-05-17USB: hub: fix SS max number of portsJohan Hovold
2017-05-17USB: hub: fix non-SS hub-descriptor handlingJohan Hovold
2017-05-17USB: hub: fix SS hub-descriptor handlingJohan Hovold
2017-03-27Merge 4.11-rc4 into usb-nextGreg Kroah-Hartman
2017-03-23usb: hub: Do not attempt to autosuspend disconnected devicesGuenter Roeck
2017-03-23usb: hub: Fix error loop seen after hub communication errorsGuenter Roeck
2017-03-17usb: hub: Fix crash after failure to read BOS descriptorGuenter Roeck
2017-03-02sched/headers: Prepare to move the memalloc_noio_*() APIs to <linux/sched/mm.h>Ingo Molnar
2017-01-05usb: hub: Move hub_port_disable() to fix warning if PM is disabledGeert Uytterhoeven
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
2016-12-05usb: hub: Wait for connection to be reestablished after port resetGuenter Roeck
2016-11-17usb: hub: Fix auto-remount of safely removed or ejected USB-3 devicesMathias Nyman
2016-10-29USB: core: add missing license information to some filesGreg Kroah-Hartman
2016-09-27usb: hub: change CLEAR_FEATURE to SET_FEATUREYonglong Wu
2016-08-30usb: core: hub: don't print on ENOMEMWolfram Sang