aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ti/cpsw.c
AgeCommit message (Collapse)Author
2024-02-08net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdioSinthu Raja
The below commit introduced a WARN when phy state is not in the states: PHY_HALTED, PHY_READY and PHY_UP. commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") When cpsw resumes, there have port in PHY_NOLINK state, so the below warning comes out. Set mac_managed_pm be true to tell mdio that the phy resume/suspend is managed by the mac, to fix the following warning: WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144 CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1 Hardware name: Generic AM33XX (Flattened Device Tree) unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x24/0x2c dump_stack_lvl from __warn+0x84/0x15c __warn from warn_slowpath_fmt+0x1a8/0x1c8 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140 dpm_run_callback from device_resume+0xb8/0x2b8 device_resume from dpm_resume+0x144/0x314 dpm_resume from dpm_resume_end+0x14/0x20 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c pm_suspend from state_store+0x74/0xd0 state_store from kernfs_fop_write_iter+0x104/0x1ec kernfs_fop_write_iter from vfs_write+0x1b8/0x358 vfs_write from ksys_write+0x78/0xf8 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xe094dfa8 to 0xe094dff0) dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001 dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000 dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66 Cc: <stable@vger.kernel.org> # v6.0+ Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-30net: ethernet: ti: cpsw: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Replace the error path returning a non-zero value by an error message and a comment that there is more to do. With that this patch results in no change of behaviour in this driver apart from improving the error message. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-07page_pool: split types and declarations from page_pool.hYunsheng Lin
Split types and pure function declarations from page_pool.h and add them in page_page/types.h, so that C sources can include page_pool.h and headers should generally only include page_pool/types.h as suggested by jakub. Rename page_pool.h to page_pool/helpers.h to have both in one place. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230804180529.2483231-2-aleksander.lobakin@intel.com [Jakub: change microsoft/mana, fix kdoc paths in Documentation] Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-12net: ti/cpsw: Add explicit platform_device.h and of_platform.h includesRob Herring
TI CPSW uses of_platform_* functions which are declared in of_platform.h. of_platform.h gets implicitly included by of_device.h, but that is going to be removed soon. Nothing else depends on of_device.h so it can be dropped. of_platform.h also implicitly includes platform_device.h, so add an explicit include for it, too. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02drivers: net: turn on XDP featuresMarek Majtyka
A summary of the flags being set for various drivers is given below. Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features that can be turned off and on at runtime. This means that these flags may be set and unset under RTNL lock protection by the driver. Hence, READ_ONCE must be used by code loading the flag value. Also, these flags are not used for synchronization against the availability of XDP resources on a device. It is merely a hint, and hence the read may race with the actual teardown of XDP resources on the device. This may change in the future, e.g. operations taking a reference on the XDP resources of the driver, and in turn inhibiting turning off this flag. However, for now, it can only be used as a hint to check whether device supports becoming a redirection target. Turn 'hw-offload' feature flag on for: - netronome (nfp) - netdevsim. Turn 'native' and 'zerocopy' features flags on for: - intel (i40e, ice, ixgbe, igc) - mellanox (mlx5). - stmmac - netronome (nfp) Turn 'native' features flags on for: - amazon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2, enetc) - funeth - intel (igb) - marvell (mvneta, mvpp2, octeontx2) - mellanox (mlx4) - mtk_eth_soc - qlogic (qede) - sfc - socionext (netsec) - ti (cpsw) - tap - tsnep - veth - xen - virtio_net. Turn 'basic' (tx, pass, aborted and drop) features flags on for: - netronome (nfp) - cavium (thunder) - hyperv. Turn 'redirect_target' feature flag on for: - amanzon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2) - intel (i40e, ice, igb, ixgbe) - ti (cpsw) - marvell (mvneta, mvpp2) - sfc - socionext (netsec) - qlogic (qede) - mellanox (mlx5) - tap - veth - virtio_net - xen Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Marek Majtyka <alardam@gmail.com> Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-11-09net: cpsw: disable napi in cpsw_ndo_open()Zhengchao Shao
When failed to create xdp rxqs or fill rx channels in cpsw_ndo_open() for opening device, napi isn't disabled. When open cpsw device next time, it will report a invalid opcode issue. Compiled tested only. Fixes: d354eb85d618 ("drivers: net: cpsw: dual_emac: simplify napi usage") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109011537.96975-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21net: ethernet: ti: cpsw: Switch to use dev_err_probe() helperYang Yingliang
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05net: switch to netif_napi_add_tx()Jakub Kicinski
Switch net callers to the new API not requiring the NAPI_POLL_WEIGHT argument. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20220504163725.550782-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29eth: cpsw: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-12net: ethernet: ti: cpsw: using pm_runtime_resume_and_get instead of ↵Minghao Chi
pm_runtime_get_sync Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20220412082847.2532584-1-chi.minghao@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: ethernet: ti: cpsw: drop CPSW_HEADROOM defineGrygorii Strashko
Since commit 1771afd47430 ("net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account") the TI CPSW driver was switched to use correct define CPSW_HEADROOM_NA to avoid alignment faults, but there are two places left where CPSW_HEADROOM is still used (without causing issues). Hence, completely drop CPSW_HEADROOM define and use CPSW_HEADROOM_NA everywhere to avoid further mistakes in code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-19net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into accountArd Biesheuvel
Both versions of the CPSW driver declare a CPSW_HEADROOM_NA macro that takes NET_IP_ALIGN into account, but fail to use it appropriately when storing incoming packets in memory. This results in the IPv4 source and destination addresses to appear misaligned in memory, which causes aligment faults that need to be fixed up in software. So let's switch from CPSW_HEADROOM to CPSW_HEADROOM_NA where needed. This gets rid of any alignment faults on the RX path on a Beaglebone White. Fixes: 9ed4050c0d75 ("net: ethernet: ti: cpsw: add XDP support") Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09page_pool: keep pp info as long as page pool owns the pageYunsheng Lin
Currently, page->pp is cleared and set everytime the page is recycled, which is unnecessary. So only set the page->pp when the page is added to the page pool and only clear it when the page is released from the page pool. This is also a preparation to support allocating frag page in page pool. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-06net: ethernet: ti: cpsw: switch to use skb_put_padto()Grygorii Strashko
Use skb_put_padto() instead of skb_padto() so skb->len also got updated, as preparation for further removing frame padding from cpdma. It also makes xmit path more clear and linear. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: ti: add pp skb recycling supportLorenzo Bianconi
As already done for mvneta and mvpp2, enable skb recycling for ti ethernet drivers ti driver on net-next: ---------------------- [perf top] 47.15% [kernel] [k] _raw_spin_unlock_irqrestore 11.77% [kernel] [k] __cpdma_chan_free 3.16% [kernel] [k] ___bpf_prog_run 2.52% [kernel] [k] cpsw_rx_vlan_encap 2.34% [kernel] [k] __netif_receive_skb_core 2.27% [kernel] [k] free_unref_page 2.26% [kernel] [k] kmem_cache_free 2.24% [kernel] [k] kmem_cache_alloc 1.69% [kernel] [k] __softirqentry_text_start 1.61% [kernel] [k] cpsw_rx_handler 1.19% [kernel] [k] page_pool_release_page 1.19% [kernel] [k] clear_bits_ll 1.15% [kernel] [k] page_frag_free 1.06% [kernel] [k] __dma_page_dev_to_cpu 0.99% [kernel] [k] memset 0.94% [kernel] [k] __alloc_pages_bulk 0.92% [kernel] [k] kfree_skb 0.85% [kernel] [k] packet_rcv 0.78% [kernel] [k] page_address 0.75% [kernel] [k] v7_dma_inv_range 0.71% [kernel] [k] __lock_text_start [iperf3 tcp] [ 5] 0.00-10.00 sec 873 MBytes 732 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 866 MBytes 726 Mbits/sec receiver ti + skb recycling: ------------------- [perf top] 40.58% [kernel] [k] _raw_spin_unlock_irqrestore 16.18% [kernel] [k] __softirqentry_text_start 10.33% [kernel] [k] __cpdma_chan_free 2.62% [kernel] [k] ___bpf_prog_run 2.05% [kernel] [k] cpsw_rx_vlan_encap 2.00% [kernel] [k] kmem_cache_alloc 1.86% [kernel] [k] __netif_receive_skb_core 1.80% [kernel] [k] kmem_cache_free 1.63% [kernel] [k] cpsw_rx_handler 1.12% [kernel] [k] cpsw_rx_mq_poll 1.11% [kernel] [k] page_pool_put_page 1.04% [kernel] [k] _raw_spin_unlock 0.97% [kernel] [k] clear_bits_ll 0.90% [kernel] [k] packet_rcv 0.88% [kernel] [k] __dma_page_dev_to_cpu 0.85% [kernel] [k] kfree_skb 0.80% [kernel] [k] memset 0.71% [kernel] [k] __lock_text_start 0.66% [kernel] [k] v7_dma_inv_range 0.64% [kernel] [k] gen_pool_free_owner [iperf3 tcp] [ 5] 0.00-10.00 sec 884 MBytes 742 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 878 MBytes 735 Mbits/sec receiver Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10net: ethernet: ti: cpsw: Use devm_platform_get_and_ioremap_resource()Yang Yingliang
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13of: net: pass the dst buffer to of_get_mac_address()Michael Walle
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18bpf, devmap: Move drop error path to devmap for XDP_REDIRECTLorenzo Bianconi
We want to change the current ndo_xdp_xmit drop semantics because it will allow us to implement better queue overflow handling. This is working towards the larger goal of a XDP TX queue-hook. Move XDP_REDIRECT error path handling from each XDP ethernet driver to devmap code. According to the new APIs, the driver running the ndo_xdp_xmit pointer, will break tx loop whenever the hw reports a tx error and it will just return to devmap caller the number of successfully transmitted frames. It will be devmap responsibility to free dropped frames. Move each XDP ndo_xdp_xmit capable driver to the new APIs: - veth - virtio-net - mvneta - mvpp2 - socionext - amazon ena - bnxt - freescale (dpaa2, dpaa) - xen-frontend - qede - ice - igb - ixgbe - i40e - mlx5 - ti (cpsw, cpsw-new) - tun - sfc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/bpf/ed670de24f951cfd77590decf0229a0ad7fd12f6.1615201152.git.lorenzo@kernel.org
2021-02-06net: ethernet: ti: fix netdevice stats for XDPLorenzo Bianconi
Align netdevice statistics when the device is running in XDP mode to other upstream drivers. In particular report to user-space rx packets even if they are not forwarded to the networking stack (XDP_PASS) but if they are redirected (XDP_REDIRECT), dropped (XDP_DROP) or sent back using the same interface (XDP_TX). This patch allows the system administrator to verify the device is receiving data correctly. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/a457cb17dd9c58c116d64ee34c354b2e89c0ff8f.1612375372.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08net, xdp: Introduce xdp_prepare_buff utility routineLorenzo Bianconi
Introduce xdp_prepare_buff utility routine to initialize per-descriptor xdp_buff fields (e.g. xdp_buff pointers). Rely on xdp_prepare_buff() in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/45f46f12295972a97da8ca01990b3e71501e9d89.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-08net, xdp: Introduce xdp_init_buff utility routineLorenzo Bianconi
Introduce xdp_init_buff utility routine to initialize xdp_buff fields const over NAPI iterations (e.g. frame_sz or rxq pointer). Rely on xdp_init_buff in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/7f8329b6da1434dc2b05a77f2e800b29628a8913.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-11-16net: ethernet: ti: cpsw: fix error return code in cpsw_probe()Zhang Changzhong
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 83a8471ba255 ("net: ethernet: ti: cpsw: refactor probe to group common hw initialization") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605250173-18438-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13net: ethernet: ti: cpsw: fix cpts irq after suspendGrygorii Strashko
Depending on the SoC/platform the CPSW can completely lose context after a suspend/resume cycle, including CPSW wrapper (WR) which will cause reset of WR_C0_MISC_EN register, so CPTS IRQ will became disabled. Fix it by moving CPTS IRQ enabling in cpsw_ndo_open() where CPTS is actually started. Fixes: 84ea9c0a95d7 ("net: ethernet: ti: cpsw: enable cpts irq") Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20201112111546.20343-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-19net: ethernet: ti: cpsw: use true,false for bool variablesJason Yan
This addresses the following coccinelle warning: drivers/net/ethernet/ti/cpsw.c:1599:2-17: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/ti/cpsw.c:1300:2-17: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ethernet: ti: cpsw: use dev_id for ale configurationGrygorii Strashko
The previous patch has introduced possibility to select CPSW ALE by using ALE dev_id identifier. Switch TI cpsw driver to use dev_id="cpsw" and perform clean up by removing "ale_entries" configuration code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: ethernet: ti: cpsw: fix clean up of vlan mc entries for host portMurali Karicheri
To flush the vid + mc entries from ALE, which is required when a VLAN interface is removed, driver needs to call cpsw_ale_flush_multicast() with ALE_PORT_HOST for port mask as these entries are added only for host port. Without this, these entries remain in the ALE table even after removing the VLAN interface. cpsw_ale_flush_multicast() calls cpsw_ale_flush_mcast which expects a port mask to do the job. Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The MSCC bug fix in 'net' had to be slightly adjusted because the register accesses are done slightly differently in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspendGrygorii Strashko
vlan_for_each() are required to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered - which happens now during System resume from suspend: cpsw_suspend() |- cpsw_ndo_stop() |- __hw_addr_ref_unsync_dev() |- cpsw_purge_all_mc() |- vlan_for_each() |- ASSERT_RTNL(); Hence, fix it by surrounding cpsw_ndo_stop() by rtnl_lock/unlock() calls. Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: ethernet: ti: Add XDP frame size to driver cpswJesper Dangaard Brouer
The driver code cpsw.c and cpsw_new.c both use page_pool with default order-0 pages or their RX-pages. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/bpf/158945340875.97035.752144756428532878.stgit@firesoul
2020-04-23net: ethernet: ti: cpsw: enable cpts irqGrygorii Strashko
The CPSW misc IRQ need be enabled for CPTS event_pend IRQs processing. This patch adds corresponding support to CPSW driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: cpsw: reject unsupported coalescing paramsJakub Kicinski
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: ethernet: ti: cpsw: move set of common functions in cpsw_privGrygorii Strashko
As a preparatory patch to add support for a switchdev based cpsw driver, move common functions to cpsw-priv.c so that they can be used across both drivers. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: ethernet: ti: cpsw: resolve build deps of cpsw driversGrygorii Strashko
A following patches introduce new CPSW switchdev driver which uses common code with legacy CPSW driver. This will introduce build dependency between CPSW switchdev and CPSW legacy drivers related to for_each_slave() and cpsw_slave_index() - they can be compiled both, but only one of them will be not functional depending in Kconfig settings due to duffrences in Slave Ports indexes calculation. To fix this make for_each_slave() local (it's used now only by legacy CPSW driver) and convert cpsw_slave_index() to be a function pointer which is assigned in probe. Driver to probe is defined by DT. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: ethernet: ti: cpsw: allow untagged traffic on host portGrygorii Strashko
Now untagged vlan traffic is not support on Host P0 port. This patch adds in ALE context bitmap of VLANs for which Host P0 port bit set in Force Untagged Packet Egress bitmask in VLANs ALE entries, and adds corresponding check in VLAN incapsulation header parsing function cpsw_rx_vlan_encap(). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-04net: of_get_phy_mode: Change API to solve int/unit warningsAndrew Lunn
Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21net: cpsw: fix NULL pointer exception in the probe error pathAntoine Tenart
In certain cases when the probe function fails the error path calls cpsw_remove_dt() before calling platform_set_drvdata(). This is an issue as cpsw_remove_dt() uses platform_get_drvdata() to retrieve the cpsw_common data and leds to a NULL pointer exception. This patches fixes it by calling platform_set_drvdata() earlier in the probe. Fixes: 83a8471ba255 ("net: ethernet: ti: cpsw: refactor probe to group common hw initialization") Reported-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21net: ethernet: ti: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16net: ethernet: ti: cpsw: Add of_node_put() before return and breakNishka Dasgupta
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return or break from the middle of the loop, there is no put, thus causing a memory leak. Hence, for function cpsw_probe_dt, create an extra label err_node_put that puts the last used node and returns ret; modify the return statements in the loop to save the return value in ret and goto this new label. For function cpsw_remove_dt, add an of_node_put before the break. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08net: ethernet: ti: cpsw: add XDP supportIvan Khoronzhuk
Add XDP support based on rx page_pool allocator, one frame per page. Page pool allocator is used with assumption that only one rx_handler is running simultaneously. DMA map/unmap is reused from page pool despite there is no need to map whole page. Due to specific of cpsw, the same TX/RX handler can be used by 2 network devices, so special fields in buffer are added to identify an interface the frame is destined to. Thus XDP works for both interfaces, that allows to test xdp redirect between two interfaces easily. Also, each rx queue have own page pools, but common for both netdevs. XDP prog is common for all channels till appropriate changes are added in XDP infrastructure. Also, once page_pool recycling becomes part of skb netstack some simplifications can be added, like removing page_pool_release_page() before skb receive. In order to keep rx_dev while redirect, that can be somehow used in future, do flush in rx_handler, that allows to keep rx dev the same while redirect. It allows to conform with tracing rx_dev pointed by Jesper. Also, there is probability, that XDP generic code can be extended to support multi ndev drivers like this one, using same rx queue for several ndevs, based on switchdev for instance or else. In this case, driver can be modified like exposed here: https://lkml.org/lkml/2019/7/3/243 Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: ethernet: ti: cpsw: Assign OF node to slave devicesMarek Vasut
Assign OF node to CPSW slave devices, otherwise it is not possible to bind e.g. DSA switch to them. Without this patch, the DSA code tries to find the ethernet device by OF match, but fails to do so because the slave device has NULL OF node. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24net: ethernet: ti: cpsw: Fix suspend/resume breakKeerthy
Commit bfe59032bd6127ee190edb30be9381a01765b958 ("net: ethernet: ti: cpsw: use cpsw as drv data")changes the driver data to struct cpsw_common *cpsw. This is done only in probe/remove but the suspend/resume functions are still left with struct net_device *ndev. Hence fix both suspend & resume also to fetch the updated driver data. Fixes: bfe59032bd6127ee1 ("net: ethernet: ti: cpsw: use cpsw as drv data") Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-16net: ethernet: ti: davinci_cpdma: use idled submitIvan Khoronzhuk
While data pass suspend, reuse of rx descriptors can be disabled using channel state & lock from cpdma layer. For this, submit to a channel has to be disabled using state != "not active" under lock, what is done with this patch. The same submit is used to fill rx channel while ndo_open, when channel is idled, so add idled submit routine that allows to prepare descs for the channel. All this simplifies code and helps to avoid dormant mode usage and send packets only to active channels, avoiding potential race in later on changes. Also add missed sync barrier analogically like in other places after stopping tx queues. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: ethernet: ti: cpsw: use cpsw as drv dataIvan Khoronzhuk
No need to set ndev for drvdata when mainly cpsw reference is needed, so correct this legacy decision. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-13 07:30:53 +0000