aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/dma/pl330.c
AgeCommit message (Collapse)Author
2023-12-22dmaengine: pl330: issue_pending waits until WFP stateBumyong Lee
According to DMA-330 errata notice[1] 71930, DMAKILL cannot clear internal signal, named pipeline_req_active. it makes that pl330 would wait forever in WFP state although dma already send dma request if pl330 gets dma request before entering WFP state. The errata suggests that polling until entering WFP state as workaround and then peripherals allows to issue dma request. [1]: https://developer.arm.com/documentation/genc008428/latest Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com> Link: https://lore.kernel.org/r/20231219055026.118695-1-bumyong.lee@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-07dmaengine: pl330: Return DMA_PAUSED when transaction is pausedIlpo Järvinen
pl330_pause() does not set anything to indicate paused condition which causes pl330_tx_status() to return DMA_IN_PROGRESS. This breaks 8250 DMA flush after the fix in commit 57e9af7831dc ("serial: 8250_dma: Fix DMA Rx rearm race"). The function comment for pl330_pause() claims pause is supported but resume is not which is enough for 8250 DMA flush to work as long as DMA status reports DMA_PAUSED when appropriate. Add PAUSED state for descriptor and mark BUSY descriptors with PAUSED in pl330_pause(). Return DMA_PAUSED from pl330_tx_status() when the descriptor is PAUSED. Reported-by: Richard Tresidder <rtresidd@electromag.com.au> Tested-by: Richard Tresidder <rtresidd@electromag.com.au> Fixes: 88987d2c7534 ("dmaengine: pl330: add DMA_PAUSE feature") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-serial/f8a86ecd-64b1-573f-c2fa-59f541083f1a@electromag.com.au/ Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230526105434.14959-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-24dmaengine: pl330: rename _start to prevent build errorRandy Dunlap
"_start" is used in several arches and proably should be reserved for ARCH usage. Using it in a driver for a private symbol can cause a build error when it conflicts with ARCH usage of the same symbol. Therefore rename pl330's "_start" to "pl330_start_thread" so that there is no conflict and no build error. drivers/dma/pl330.c:1053:13: error: '_start' redeclared as different kind of symbol 1053 | static bool _start(struct pl330_thread *thrd) | ^~~~~~ In file included from ../include/linux/interrupt.h:21, from ../drivers/dma/pl330.c:18: arch/riscv/include/asm/sections.h:11:13: note: previous declaration of '_start' with type 'char[]' 11 | extern char _start[]; | ^~~~~~ Fixes: b7d861d93945 ("DMA: PL330: Merge PL330 driver into drivers/dma/") Fixes: ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jaswinder Singh <jassisinghbrar@gmail.com> Cc: Boojin Kim <boojin.kim@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Cc: linux-riscv@lists.infradead.org Link: https://lore.kernel.org/r/20230524045310.27923-1-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-05dmaengine: pl330: Remove unused flagsHarini Katakam
txd.flags is unused and need not be updated. Signed-off-by: Harini Katakam <harini.katakam@amd.com> Link: https://lore.kernel.org/r/20220802102232.17653-1-harini.katakam@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06dmaengine: pl330: Fix lockdep warning about non-static keyDmitry Osipenko
The DEFINE_SPINLOCK() macro shouldn't be used for dynamically allocated spinlocks. The lockdep warns about this and disables locking validator. Fix the warning by making lock static. INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Hardware name: Radxa ROCK Pi 4C (DT) Call trace: dump_backtrace.part.0+0xcc/0xe0 show_stack+0x18/0x6c dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 register_lock_class+0x4a8/0x4cc __lock_acquire+0x78/0x20cc lock_acquire.part.0+0xe0/0x230 lock_acquire+0x68/0x84 _raw_spin_lock_irqsave+0x84/0xc4 add_desc+0x44/0xc0 pl330_get_desc+0x15c/0x1d0 pl330_prep_dma_cyclic+0x100/0x270 snd_dmaengine_pcm_trigger+0xec/0x1c0 dmaengine_pcm_trigger+0x18/0x24 ... Fixes: e588710311ee ("dmaengine: pl330: fix descriptor allocation fail") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20220520181432.149904-1-dmitry.osipenko@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-28ARM: 9172/1: amba: Cleanup amba pclk operationWang Kefeng
There is no user about amba_pclk_[un]prepare() besides pl330.c, directly use clk_[un]prepare(). After this, all the function about amba pclk operation, enable, disable, [un]prepare could be killed. Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-05-10dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclcBumyong Lee
flags varible which is the input parameter of pl330_prep_dma_cyclic() should not be used by spinlock_irq[save/restore] function. Signed-off-by: Jongho Park <jongho7.park@samsung.com> Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20210507063647.111209-1-chanho61.park@samsung.com Fixes: f6f2421c0a1c ("dmaengine: pl330: Merge dma_pl330_dmac and pl330_dmac structs") Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-02amba: Make the remove callback return voidUwe Kleine-König
All amba drivers return 0 in their remove callback. Together with the driver core ignoring the return value anyhow, it doesn't make sense to return a value here. Change the remove prototype to return void, which makes it explicit that returning an error value doesn't work as expected. This simplifies changing the core remove callback to return void, too. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Takashi Iwai <tiwai@suse.de> # for sound Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2020-12-17Merge tag 'dmaengine-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "The last dmaengine updates for this year :) This contains couple of new drivers, new device support and updates to bunch of drivers. New drivers/devices: - Qualcomm ADM driver - Qualcomm GPI driver - Allwinner A100 DMA support - Microchip Sama7g5 support - Mediatek MT8516 apdma Updates: - more updates to idxd driver and support for IAX config - runtime PM support for dw driver - TI drivers" * tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits) soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA dmaengine: ti: k3-udma: Initial support for K3 PKTDMA dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling dmaengine: ti: k3-udma: Initial support for K3 BCDMA soc: ti: k3-ringacc: add AM64 DMA rings support. dmaengine: ti: Add support for k3 event routers dmaengine: ti: k3-psil: Add initial map for AM64 dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 BCDMA dmaengine: dmatest: Use dmaengine_get_dma_device dmaengine: doc: client: Update for dmaengine_get_dma_device() usage dmaengine: Add support for per channel coherency handling dmaengine: of-dma: Add support for optional router configuration callback dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API dmaengine: ti: k3-udma: Add support for second resource range from sysfw dmaengine: ti: k3-udma: Wait for peer teardown completion if supported ...
2020-11-16dmaengine: pl330: _prep_dma_memcpy: Fix wrong burst sizeSugar Zhang
Actually, burst size is equal to '1 << desc->rqcfg.brst_size'. we should use burst size, not desc->rqcfg.brst_size. dma memcpy performance on Rockchip RV1126 @ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA: dmatest: /# echo dma0chan0 > /sys/module/dmatest/parameters/channel /# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size /# echo 8 > /sys/module/dmatest/parameters/iterations /# echo y > /sys/module/dmatest/parameters/norandom /# echo y > /sys/module/dmatest/parameters/verbose /# echo 1 > /sys/module/dmatest/parameters/run dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 Before: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0) After this patch: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0) After this patch and increase dma clk to 400MHz: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0) Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1605326106-55681-1-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-30dmaengine: pl330: Remove unreachable codeSurendran K
_setup_req(..) never returns negative value. Hence the condition ret < 0 is never met Signed-off-by: Surendran K <surendran.k@samsung.com> Link: https://lore.kernel.org/r/20201016103347.63084-1-surendran.k@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-01dmaengine: pl330: fix argument for taskletVinod Koul
Commit 59cd818763e8 ("dmaengine: fsl: convert tasklets to use new tasklet_setup() API") converted the pl330 driver to use new tasklet functions but missed that driver calls the tasklet function directly as well, so update it. Fixes: 59cd818763e8 ("dmaengine: fsl: convert tasklets to use new tasklet_setup() API") Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20200930121735.49699-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18dmaengine: pl330: convert tasklets to use new tasklet_setup() APIAllen Pais
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Link: https://lore.kernel.org/r/20200831103542.305571-21-allen.lkml@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-11Merge tag 'v5.9-rc4' into nextVinod Koul
Linux 5.9-rc4
2020-09-11dmaengine: pl330: Drop local dma_parmsRobin Murphy
Since commit f458488425f1 ("amba: Initialize dma_parms for amba devices"), struct amba_device already provides a dma_parms structure, so we can save allocating another one. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/c9e58882e33f22f9b0a6d65a5507e24004512148.1599164692.git.robin.murphy@arm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-04Merge tag 'dmaengine-fix-5.9-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A couple of core fixes and odd driver fixes for dmaengine subsystem: Core: - drop ACPI CSRT table reference after using it - fix of_dma_router_xlate() error handling Drivers fixes in idxd, at_hdmac, pl330, dw-edma and jz478" * tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0 drivers/dma/dma-jz4780: Fix race condition between probe and irq handler dmaengine: dw-edma: Fix scatter-gather address calculation dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sg dmaengine: pl330: Fix burst length if burst size is smaller than bus width dmaengine: at_hdmac: add missing kfree() call in at_dma_xlate() dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate() dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate() dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling dmaengine: idxd: reset states after device disable or reset dmaengine: acpi: Put the CSRT table after using it
2020-09-03dmaengine: pl330: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200828152637.16903-1-krzk@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-25dmaengine: pl330: fix instruction dump formattingŁukasz Stelmach
Instruction dump uses two printk() in a row to print one instruction. Use KERN_CONT to prevent breaking the output in the middle. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20200813204123.19044-1-l.stelmach@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-25dmaengine: pl330: Fix burst length if burst size is smaller than bus widthMarek Szyprowski
Move the burst len fixup after setting the generic value for it. This finally enables the fixup introduced by commit 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was overwritten by the generic value. Reported-by: kernel test robot <lkp@intel.com> Fixes: 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-15dmaengine: pl330: Demote obvious misuse of kerneldoc to standard comment blockLee Jones
No 'struct' title is provided. Nor are any attribute descriptions. Fixes the following W=1 kernel build warning(s): drivers/dma/pl330.c:295: warning: cannot understand function prototype: 'struct pl330_reqcfg ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Jaswinder Singh <jassi.brar@samsung.com> Link: https://lore.kernel.org/r/20200714111546.1755231-6-lee.jones@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15dmaengine: pl330: Add quirk 'arm,pl330-periph-burst'Sugar Zhang
This patch adds the qurik to use burst transfers only for pl330 controller, even for request with a length of 1. Although, the correct way should be: if the peripheral request length is 1, the peripheral should use SINGLE request, and then notify the dmac using SINGLE mode by src/dst_maxburst with 1. For example, on the Rockchip SoCs, all the peripherals can use SINGLE or BURST request by setting GRF registers. it is possible that if these peripheral drivers are used only for Rockchip SoCs. Unfortunately, it's not, such as dw uart, which is used so widely, and we can't set src/dst_maxburst according to the SoCs' specific to compatible with all the other SoCs. So, for convenience, all the peripherals are set as BURST request by default on the Rockchip SoCs. even for request with a length of 1. the current pl330 driver will perform SINGLE transfer if the client's maxburst is 1, which still should be working according to chapter 2.6.6 of datasheet which describe how DMAC performs SINGLE transfers for a BURST request. Unfortunately, it's broken on the Rockchip SoCs, which support only matching transfers, such as BURST transfer for BURST request, SINGLE transfer for SINGLE request. Finally, we add the quirk to specify pl330 to use burst transfers only. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1593439555-68130-5-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15dmaengine: pl330: Improve transfer efficiency for the dregsSugar Zhang
Only the unaligned burst transfers have the dregs. so, still use BURST transfer with a reduced size for better performance. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1593439555-68130-3-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15dmaengine: pl330: Remove the burst limit for quirk 'NO-FLUSHP'Sugar Zhang
There is no reason to limit the performance on the 'NO-FLUSHP' SoCs, because 'FLUSHP' instruction is broken on these platforms, so remove the limit to improve the efficiency. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1593439555-68130-2-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-24dmaengine: pl330: Make sure the debug is idle before doing DMAGOSugar Zhang
According to the datasheet of pl330: Example 2-1 Using DMAGO with the debug instruction registers 1. Create a program for the DMA channel 2. Store the program in a region of system memory 3. Poll the DBGSTATUS Register to ensure that the debug is idle 4. Write to the DBGINST0 Register 5. Write to the DBGINST1 Register 6. Write zero to the DBGCMD Register so, we should make sure the debug is idle before step 4/5/6, not only step 6. if not, there maybe a risk that fail to write DBGINST0/1. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1591234598-78919-1-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-10dmaengine: pl330: Convert to the *_late and *_early system sleep callbacksUlf Hansson
It has turned out that it's in general a good idea for dmaengines to allow DMA requests during the entire dpm_suspend() phase. Therefore, convert the pl330 driver into using SET_LATE_SYSTEM_SLEEP_PM_OPS. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20191205143746.24873-3-ulf.hansson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-10dmaengine: pl330: Drop boilerplate code for suspend/resumeUlf Hansson
Let's drop the boilerplate code in the system suspend/resume callbacks and convert to use pm_runtime_force_suspend|resume(). This change also has a nice side effect, as pm_runtime_force_resume() may decide to leave the device in low power state, when that is feasible, thus avoiding to waste both time and energy during system resume. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20191205143746.24873-2-ulf.hansson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-08dmaengine: pl330: use the same attributes when freeing pl330->mcode_cpuFuqian Huang
In function dmac_alloc_resources(), pl330->mcode_cpu is allocated using dma_alloc_attrs() but freed with dma_free_coherent(). Use the correct dma_free_attrs() function to free pl330->mcode_cpu. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/r/20190726105947.25342-1-huangfq.daxian@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-17Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...
2019-06-14dmagengine: pl330: add code to get reset propertyDinh Nguyen
The DMA controller on some SoCs can be held in reset, and thus requires the reset signal(s) to deasserted. Most SoCs will have just one reset signal, but there are others, i.e. Arria10/Stratix10 will have an additional reset signal, referred to as the OCP. Add code to get the reset property from the device tree for deassert and assert. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-26dmaengine: pl330: _stop: clear interrupt statusSugar Zhang
This patch kill instructs the DMAC to immediately terminate execution of a thread. and then clear the interrupt status, at last, stop generating interrupts for DMA_SEV. to guarantee the next dma start is clean. otherwise, one interrupt maybe leave to next start and make some mistake. we can reporduce the problem as follows: DMASEV: modify the event-interrupt resource, and if the INTEN sets function as interrupt, the DMAC will set irq<event_num> HIGH to generate interrupt. write INTCLR to clear interrupt. DMA EXECUTING INSTRUCTS DMA TERMINATE | | | | ... _stop | | | spin_lock_irqsave DMASEV | | | | mask INTEN | | | DMAKILL | | | spin_unlock_irqrestore in above case, a interrupt was left, and if we unmask INTEN, the DMAC will set irq<event_num> HIGH to generate interrupt. to fix this, do as follows: DMA EXECUTING INSTRUCTS DMA TERMINATE | | | | ... _stop | | | spin_lock_irqsave DMASEV | | | | DMAKILL | | | clear INTCLR | mask INTEN | | | spin_unlock_irqrestore Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-03-25dmaengine: pl330: introduce debugfs interfaceKatsuhiro Suzuki
This patch adds debugfs interface to show the relationship between DMA threads (hardware resource for transferring data) and DMA channel ID of DMA slave. Typically, PL330 has many slaves than number of DMA threads. So sometimes PL330 cannot allocate DMA threads for all slaves even if a user specify DMA channel ID in devicetree. This interface will be useful for checking that DMA threads are allocated or not. Below is an output sample: $ sudo cat /sys/kernel/debug/ff1f0000.dmac PL330 physical channels: THREAD: CHANNEL: -------- ----- 0 8 1 9 2 11 3 12 4 14 5 15 6 10 7 -- Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07dmaengine: pl330: drop useless LIST_HEADJulia Lawall
Drop LIST_HEAD where the variable it declares is never used. The variable has not been used since the function was introduced in 740aa95703c5 ("dmaengine: pl330: Split device_control"). The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: 740aa95703c5 ("dmaengine: pl330: Split device_control") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-11-24dmaengine: pl330: remove dma_slave_config direction usageVinod Koul
dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-18Merge tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull DMAengine updates from Vinod Koul: "This round brings couple of framework changes, a new driver and usual driver updates: - new managed helper for dmaengine framework registration - split dmaengine pause capability to pause and resume and allow drivers to report that individually - update dma_request_chan_by_mask() to handle deferred probing - move imx-sdma to use virt-dma - new driver for Actions Semi Owl family S900 controller - minor updates to intel, renesas, mv_xor, pl330 etc" * tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits) dmaengine: Add Actions Semi Owl family S900 DMA driver dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr() dmaengine: mic_x100_dma: use the new helper to simplify the code dmaengine: add a new helper dmaenginem_async_device_register dmaengine: imx-sdma: add memcpy interface dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff' dmaengine: dma_request_chan_by_mask() to handle deferred probing dmaengine: pl330: fix irq race with terminate_all dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST" dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address dmaengine: mv_xor_v2: enable COMPILE_TEST dmaengine: mv_xor_v2: move unmap to before callback dmaengine: mv_xor_v2: convert callback to helper function dmaengine: mv_xor_v2: kill the tasklets upon exit dmaengine: mv_xor_v2: explicitly freeup irq dmaengine: sh: rcar-dmac: Add dma_pause operation dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier dmaengine: idma64: Support dmaengine_terminate_sync() dmaengine: hsu: Support dmaengine_terminate_sync() ...
2018-07-25dmaengine: pl330: fix irq race with terminate_allJohn Keeping
In pl330_update() when checking if a channel has been aborted, the channel's lock is not taken, only the overall pl330_dmac lock. But in pl330_terminate_all() the aborted flag (req_running==-1) is set under the channel lock and not the pl330_dmac lock. With threaded interrupts, this leads to a potential race: pl330_terminate_all pl330_update ------------------- ------------ lock channel entry lock pl330 _stop channel unlock pl330 lock pl330 check req_running != -1 req_running = -1 _start channel Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-07-10dmaengine: pl330: remove set but unused variableVinod Koul
Compiler complains (with W=1): drivers/dma/pl330.c: In function ‘pl330_release_channel’: drivers/dma/pl330.c:1782:21: warning: variable ‘pl330’ set but not used [-Wunused-but-set-variable] struct pl330_dmac *pl330; ^~~~~ Remove the pl330 variable in pl330_release_channel as it is set but never used. Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-07-10dmaengine: pl330: Mark expected switch fall-throughVinod Koul
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-06-28dmaengine: pl330: report BURST residue granularityMarek Szyprowski
The reported residue is already calculated in BURST unit granularity, so advertise this capability properly to other devices in the system. Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-03dmaengine: pl330: flush before wait, and add dev burst support.Frank Mori Hess
Do DMAFLUSHP _before_ the first DMAWFP to ensure controller and peripheral are in agreement about dma request state before first transfer. Add support for burst transfers to/from peripherals. In the new scheme, the controller does as many burst transfers as it can then transfers the remaining dregs with either single transfers for peripherals, or with a reduced size burst for memory-to-memory transfers. Signed-off-by: Frank Mori Hess <fmh6jj@gmail.com> Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-03-06dmaengine: pl330: fix a race condition in case of threaded irqsQi Hou
When booting up with "threadirqs" in command line, all irq handlers of the DMA controller pl330 will be threaded forcedly. These threads will race for the same list, pl330->req_done. Before the callback, the spinlock was released. And after it, the spinlock was taken. This opened an race window where another threaded irq handler could steal the spinlock and be permitted to delete entries of the list, pl330->req_done. If the later deleted an entry that was still referred to by the former, there would be a kernel panic when the former was scheduled and tried to get the next sibling of the deleted entry. The scenario could be depicted as below: Thread: T1 pl330->req_done Thread: T2 | | | | -A-B-C-D- | Locked | | | | Waiting Del A | | | -B-C-D- | Unlocked | | | | Locked Waiting | | | | Del B | | | | -C-D- Unlocked Waiting | | | Locked | get C via B \ - Kernel panic The kernel panic looked like as below: Unable to handle kernel paging request at virtual address dead000000000108 pgd = ffffff8008c9e000 [dead000000000108] *pgd=000000027fffe003, *pud=000000027fffe003, *pmd=0000000000000000 Internal error: Oops: 96000044 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 85 Comm: irq/59-66330000 Not tainted 4.8.24-WR9.0.0.12_standard #2 Hardware name: Broadcom NS2 SVK (DT) task: ffffffc1f5cc3c00 task.stack: ffffffc1f5ce0000 PC is at pl330_irq_handler+0x27c/0x390 LR is at pl330_irq_handler+0x2a8/0x390 pc : [<ffffff80084cb694>] lr : [<ffffff80084cb6c0>] pstate: 800001c5 sp : ffffffc1f5ce3d00 x29: ffffffc1f5ce3d00 x28: 0000000000000140 x27: ffffffc1f5c530b0 x26: dead000000000100 x25: dead000000000200 x24: 0000000000418958 x23: 0000000000000001 x22: ffffffc1f5ccd668 x21: ffffffc1f5ccd590 x20: ffffffc1f5ccd418 x19: dead000000000060 x18: 0000000000000001 x17: 0000000000000007 x16: 0000000000000001 x15: ffffffffffffffff x14: ffffffffffffffff x13: ffffffffffffffff x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000840 x9 : ffffffc1f5ce0000 x8 : ffffffc1f5cc3338 x7 : ffffff8008ce2020 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : dead000000000200 x2 : dead000000000100 x1 : 0000000000000140 x0 : ffffffc1f5ccd590 Process irq/59-66330000 (pid: 85, stack limit = 0xffffffc1f5ce0020) Stack: (0xffffffc1f5ce3d00 to 0xffffffc1f5ce4000) 3d00: ffffffc1f5ce3d80 ffffff80080f09d0 ffffffc1f5ca0c00 ffffffc1f6f7c600 3d20: ffffffc1f5ce0000 ffffffc1f6f7c600 ffffffc1f5ca0c00 ffffff80080f0998 3d40: ffffffc1f5ce0000 ffffff80080f0000 0000000000000000 0000000000000000 3d60: ffffff8008ce202c ffffff8008ce2020 ffffffc1f5ccd668 ffffffc1f5c530b0 3d80: ffffffc1f5ce3db0 ffffff80080f0d70 ffffffc1f5ca0c40 0000000000000001 3da0: ffffffc1f5ce0000 ffffff80080f0cfc ffffffc1f5ce3e20 ffffff80080bf4f8 3dc0: ffffffc1f5ca0c80 ffffff8008bf3798 ffffff8008955528 ffffffc1f5ca0c00 3de0: ffffff80080f0c30 0000000000000000 0000000000000000 0000000000000000 3e00: 0000000000000000 0000000000000000 0000000000000000 ffffff80080f0b68 3e20: 0000000000000000 ffffff8008083690 ffffff80080bf420 ffffffc1f5ca0c80 3e40: 0000000000000000 0000000000000000 0000000000000000 ffffff80080cb648 3e60: ffffff8008b1c780 0000000000000000 0000000000000000 ffffffc1f5ca0c00 3e80: ffffffc100000000 ffffff8000000000 ffffffc1f5ce3e90 ffffffc1f5ce3e90 3ea0: 0000000000000000 ffffff8000000000 ffffffc1f5ce3eb0 ffffffc1f5ce3eb0 3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000 3fe0: 0000000000000000 0000000000000000 0000000275ce3ff0 0000000275ce3ff8 Call trace: Exception stack(0xffffffc1f5ce3b30 to 0xffffffc1f5ce3c60) 3b20: dead000000000060 0000008000000000 3b40: ffffffc1f5ce3d00 ffffff80084cb694 0000000000000008 0000000000000e88 3b60: ffffffc1f5ce3bb0 ffffff80080dac68 ffffffc1f5ce3b90 ffffff8008826fe4 3b80: 00000000000001c0 00000000000001c0 ffffffc1f5ce3bb0 ffffff800848dfcc 3ba0: 0000000000020000 ffffff8008b15ae4 ffffffc1f5ce3c00 ffffff800808f000 3bc0: 0000000000000010 ffffff80088377f0 ffffffc1f5ccd590 0000000000000140 3be0: dead000000000100 dead000000000200 0000000000000001 0000000000000000 3c00: 0000000000000000 ffffff8008ce2020 ffffffc1f5cc3338 ffffffc1f5ce0000 3c20: 0000000000000840 0000000000000001 0000000000000000 ffffffffffffffff 3c40: ffffffffffffffff ffffffffffffffff 0000000000000001 0000000000000007 [<ffffff80084cb694>] pl330_irq_handler+0x27c/0x390 [<ffffff80080f09d0>] irq_forced_thread_fn+0x38/0x88 [<ffffff80080f0d70>] irq_thread+0x140/0x200 [<ffffff80080bf4f8>] kthread+0xd8/0xf0 [<ffffff8008083690>] ret_from_fork+0x10/0x40 Code: f2a00838 f9405763 aa1c03e1 aa1503e0 (f9000443) ---[ end trace f50005726d31199c ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0-1 Kernel Offset: disabled Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt To fix this, re-start with the list-head after dropping the lock then re-takeing it. Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com> Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Qi Hou <qi.hou@windriver.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-20dmaengine: pl330: fix descriptor allocation failAlexander Kochetkov
If two concurrent threads call pl330_get_desc() when DMAC descriptor pool is empty it is possible that allocation for one of threads will fail with message: kernel: dma-pl330 20078000.dma-controller: pl330_get_desc:2469 ALERT! Here how that can happen. Thread A calls pl330_get_desc() to get descriptor. If DMAC descriptor pool is empty pl330_get_desc() allocates new descriptor on shared pool using add_desc() and then get newly allocated descriptor using pluck_desc(). At the same time thread B calls pluck_desc() and take newly allocated descriptor. In that case descriptor allocation for thread A will fail. Using on-stack pool for new descriptor allow avoid the issue described. The patch modify pl330_get_desc() to use on-stack pool for allocation new descriptors. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-28dmaengine: pl330: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-07-08Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - removal of AVR32 support in dw driver as AVR32 is gone - new driver for Broadcom stream buffer accelerator (SBA) RAID driver - add support for Faraday Technology FTDMAC020 in amba-pl08x driver - IOMMU support in pl330 driver - updates to bunch of drivers * tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: qcom_hidma: correct API violation for submit dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy dmaengine: tegra-apb: Really fix runtime-pm usage dmaengine: fsl_raid: make of_device_ids const. dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly dmaengine: Kconfig: Simplify the help text for MXS_DMA dmaengine: pl330: Delete unused functions dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once() dmaengine: Kconfig: Extend the dependency for MXS_DMA dmaengine: mxs: Use %zu for printing a size_t variable dmaengine: ste_dma40: Cleanup scatterlist layering violations dmaengine: imx-dma: cleanup scatterlist layering violations dmaengine: use proper name for the R-Car SoC dmaengine: imx-sdma: Fix compilation warning. dmaengine: imx-sdma: Handle return value of clk_prepare_enable dmaengine: pl330: Add IOMMU support to slave tranfers dmaengine: DW DMAC: Handle return value of clk_prepare_enable dmaengine: pl08x: use GENMASK() to create bitmasks dmaengine: pl08x: Add support for Faraday Technology FTDMAC020 ...
2017-06-17dmaengine: pl330: Delete unused functionsMatthias Kaehlcke
The functions _queue_empty(), _emit_ADDH(), _emit_NOP(), _emit_STZ() and _emit_WFE() are not used. Delete them. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-02dmaengine: pl330: fix warning in pl330_removeJean-Philippe Brucker
When removing a device with less than 9 IRQs (AMBA_NR_IRQS), we'll get a big WARN_ON from devres.c because pl330_remove calls devm_free_irqs for unallocated irqs. Similarly to pl330_probe, check that IRQ number is present before calling devm_free_irq. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-30dmaengine: pl330: Add IOMMU support to slave tranfersRobin Murphy
Wire up dma_map_resource() for slave transfers, so that we can let the PL330 use IOMMU-backed DMA mapping ops on systems with an appropriate IOMMU and RAM above 4GB, to avoid CPU bounce buffering. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-28dmaengine: pl330: remove pdata based initializationMarek Szyprowski
This driver is now used only on platforms which support device tree, so it is safe to remove legacy platform data based initialization code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> For plat-samsung: Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-22 14:38:40 +0000