aboutsummaryrefslogtreecommitdiffstats
path: root/block/sed-opal.c
AgeCommit message (Collapse)Author
2024-02-16block: sed-opal: handle empty atoms when parsing responseGreg Joyce
The SED Opal response parsing function response_parse() does not handle the case of an empty atom in the response. This causes the entry count to be too high and the response fails to be parsed. Recognizing, but ignoring, empty atoms allows response handling to succeed. Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com> Link: https://lore.kernel.org/r/20240216210417.3526064-2-gjoyce@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-01Merge tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linuxLinus Torvalds
Pull block updates from Jens Axboe: - Improvements to the queue_rqs() support, and adding null_blk support for that as well (Chengming) - Series improving badblocks support (Coly) - Key store support for sed-opal (Greg) - IBM partition string handling improvements (Jan) - Make number of ublk devices supported configurable (Mike) - Cancelation improvements for ublk (Ming) - MD pull requests via Song: - Handle timeout in md-cluster, by Denis Plotnikov - Cleanup pers->prepare_suspend, by Yu Kuai - Rewrite mddev_suspend(), by Yu Kuai - Simplify md_seq_ops, by Yu Kuai - Reduce unnecessary locking array_state_store(), by Mariusz Tkaczyk - Make rdev add/remove independent from daemon thread, by Yu Kuai - Refactor code around quiesce() and mddev_suspend(), by Yu Kuai - NVMe pull request via Keith: - nvme-auth updates (Mark) - nvme-tcp tls (Hannes) - nvme-fc annotaions (Kees) - Misc cleanups and improvements (Jiapeng, Joel) * tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux: (95 commits) block: ublk_drv: Remove unused function md: cleanup pers->prepare_suspend() nvme-auth: allow mixing of secret and hash lengths nvme-auth: use transformed key size to create resp nvme-auth: alloc nvme_dhchap_key as single buffer nvmet-tcp: use 'spin_lock_bh' for state_lock() powerpc/pseries: PLPKS SED Opal keystore support block: sed-opal: keystore access for SED Opal keys block:sed-opal: SED Opal keystore ublk: simplify aborting request ublk: replace monitor with cancelable uring_cmd ublk: quiesce request queue when aborting queue ublk: rename mm_lock as lock ublk: move ublk_cancel_dev() out of ub->mutex ublk: make sure io cmd handled in submitter task context ublk: don't get ublk device reference in ublk_abort_queue() ublk: Make ublks_max configurable ublk: Limit dev_id/ub_number values md-cluster: check for timeout while a new disk adding nvme: rework NVME_AUTH Kconfig selection ...
2023-10-17block: sed-opal: keystore access for SED Opal keysGreg Joyce
Allow for permanent SED authentication keys by reading/writing to the SED Opal non-volatile keystore. Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev> Link: https://lore.kernel.org/r/20231004201957.1451669-3-gjoyce@linux.vnet.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-13block: Fix regression in sed-opal for a saved key.Milan Broz
The commit 3bfeb61256643281ac4be5b8a57e9d9da3db4335 introduced the use of keyring for sed-opal. Unfortunately, there is also a possibility to save the Opal key used in opal_lock_unlock(). This patch switches the order of operation, so the cached key is used instead of failure for opal_get_key. The problem was found by the cryptsetup Opal test recently added to the cryptsetup tree. Fixes: 3bfeb6125664 ("block: sed-opal: keyring support for SED keys") Tested-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20231003100209.380037-1-gmazyland@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-22block: sed-opal: keyring support for SED keysGreg Joyce
Extend the SED block driver so it can alternatively obtain a key from a sed-opal kernel keyring. The SED ioctls will indicate the source of the key, either directly in the ioctl data or from the keyring. This allows the use of SED commands in scripts such as udev scripts so that drives may be automatically unlocked as they become available. Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230721211534.3437070-4-gjoyce@linux.vnet.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-22block: sed-opal: Implement IOC_OPAL_REVERT_LSPGreg Joyce
This is used in conjunction with IOC_OPAL_REVERT_TPR to return a drive to Original Factory State without erasing the data. If IOC_OPAL_REVERT_LSP is called with opal_revert_lsp.options bit OPAL_PRESERVE set prior to calling IOC_OPAL_REVERT_TPR, the drive global locking range will not be erased. Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230721211534.3437070-3-gjoyce@linux.vnet.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-22block: sed-opal: Implement IOC_OPAL_DISCOVERYGreg Joyce
Add IOC_OPAL_DISCOVERY ioctl to return raw discovery data to a SED Opal application. This allows the application to display drive capabilities and state. Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230721211534.3437070-2-gjoyce@linux.vnet.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-19sed-opal: geometry feature reporting commandOndrej Kozina
Locking range start and locking range length attributes may be require to satisfy restrictions exposed by OPAL2 geometry feature reporting. Geometry reporting feature is described in TCG OPAL SSC, section 3.1.1.4 (ALIGN, LogicalBlockSize, AlignmentGranularity and LowestAlignedLBA). 4.3.5.2.1.1 RangeStart Behavior: [ StartAlignment = (RangeStart modulo AlignmentGranularity) - LowestAlignedLBA ] When processing a Set method or CreateRow method on the Locking table for a non-Global Range row, if: a) the AlignmentRequired (ALIGN above) column in the LockingInfo table is TRUE; b) RangeStart is non-zero; and c) StartAlignment is non-zero, then the method SHALL fail and return an error status code INVALID_PARAMETER. 4.3.5.2.1.2 RangeLength Behavior: If RangeStart is zero, then [ LengthAlignment = (RangeLength modulo AlignmentGranularity) - LowestAlignedLBA ] If RangeStart is non-zero, then [ LengthAlignment = (RangeLength modulo AlignmentGranularity) ] When processing a Set method or CreateRow method on the Locking table for a non-Global Range row, if: a) the AlignmentRequired (ALIGN above) column in the LockingInfo table is TRUE; b) RangeLength is non-zero; and c) LengthAlignment is non-zero, then the method SHALL fail and return an error status code INVALID_PARAMETER In userspace we stuck to logical block size reported by general block device (via sysfs or ioctl), but we can not read 'AlignmentGranularity' or 'LowestAlignedLBA' anywhere else and we need to get those values from sed-opal interface otherwise we will not be able to report or avoid locking range setup INVALID_PARAMETER errors above. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Tested-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230411090931.9193-2-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: Add command to read locking range parameters.Ondrej Kozina
It returns following attributes: locking range start locking range length read lock enabled write lock enabled lock state (RW, RO or LK) It can be retrieved by user authority provided the authority was added to locking range via prior IOC_OPAL_ADD_USR_TO_LR ioctl command. The command was extended to add user in ACE that allows to read attributes listed above. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230405111223.272816-6-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: add helper to get multiple columns at once.Ondrej Kozina
Refactors current code querying single column to use the new helper. Real multi column usage will be added later. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230405111223.272816-5-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: allow user authority to get locking range attributes.Ondrej Kozina
Extend ACE set of locking range attributes accessible to user authority. This patch allows user authority to get following locking range attribues when user get added to locking range via IOC_OPAL_ADD_USR_TO_LR: locking range start locking range end read lock enabled write lock enabled read locked write locked lock on reset active key Note: Admin1 authority always remains in the ACE. Otherwise it breaks current userspace expecting Admin1 in the ACE (sedutils). See TCG OPAL2 s.4.3.1.7 "ACE_Locking_RangeNNNN_Get_RangeStartToActiveKey". Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230405111223.272816-4-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: add helper for adding user authorities in ACE.Ondrej Kozina
Move ACE construction away from add_user_to_lr routine and refactor it to be used also in later code. Also adds boolean operators defines from TCG Core specification. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230405111223.272816-3-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: do not add same authority twice in boolean ace.Ondrej Kozina
While adding user authority in boolean ace value of uid OPAL_LOCKINGRANGE_ACE_WRLOCKED or OPAL_LOCKINGRANGE_ACE_RDLOCKED, it was added twice. It seemed redundant when only single authority was added in the set method aka { authority1, authority1, OR }: TCG Storage Architecture Core Specification, 5.1.3.3 ACE_expression "This is an alternative type where the options are either a uidref to an Authority object or one of the boolean_ACE (AND = 0 and OR = 1) options. This type is used within the AC_element list to form a postfix Boolean expression of Authorities." Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230405111223.272816-2-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-17sed-opal: add support flag for SUM in status ioctlLuca Boccassi
Not every OPAL drive supports SUM (Single User Mode), so report this information to userspace via the get-status ioctl so that we can adjust the formatting options accordingly. Tested on a kingston drive (which supports it) and a samsung one (which does not). Signed-off-by: Luca Boccassi <bluca@debian.org> Link: https://lore.kernel.org/r/20230210010612.28729-1-luca.boccassi@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-13Merge tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linuxLinus Torvalds
Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - Support some passthrough commands without CAP_SYS_ADMIN (Kanchan Joshi) - Refactor PCIe probing and reset (Christoph Hellwig) - Various fabrics authentication fixes and improvements (Sagi Grimberg) - Avoid fallback to sequential scan due to transient issues (Uday Shankar) - Implement support for the DEAC bit in Write Zeroes (Christoph Hellwig) - Allow overriding the IEEE OUI and firmware revision in configfs for nvmet (Aleksandr Miloserdov) - Force reconnect when number of queue changes in nvmet (Daniel Wagner) - Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi Grimberg, Christoph Hellwig, Christophe JAILLET) - Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni) - Use the common tagset helpers in nvme-pci driver (Christoph Hellwig) - Cleanup the nvme-pci removal path (Christoph Hellwig) - Use kstrtobool() instead of strtobool (Christophe JAILLET) - Allow unprivileged passthrough of Identify Controller (Joel Granados) - Support io stats on the mpath device (Sagi Grimberg) - Minor nvmet cleanup (Sagi Grimberg) - MD pull requests via Song: - Code cleanups (Christoph) - Various fixes - Floppy pull request from Denis: - Fix a memory leak in the init error path (Yuan) - Series fixing some batch wakeup issues with sbitmap (Gabriel) - Removal of the pktcdvd driver that was deprecated more than 5 years ago, and subsequent removal of the devnode callback in struct block_device_operations as no users are now left (Greg) - Fix for partition read on an exclusively opened bdev (Jan) - Series of elevator API cleanups (Jinlong, Christoph) - Series of fixes and cleanups for blk-iocost (Kemeng) - Series of fixes and cleanups for blk-throttle (Kemeng) - Series adding concurrent support for sync queues in BFQ (Yu) - Series bringing drbd a bit closer to the out-of-tree maintained version (Christian, Joel, Lars, Philipp) - Misc drbd fixes (Wang) - blk-wbt fixes and tweaks for enable/disable (Yu) - Fixes for mq-deadline for zoned devices (Damien) - Add support for read-only and offline zones for null_blk (Shin'ichiro) - Series fixing the delayed holder tracking, as used by DM (Yu, Christoph) - Series enabling bio alloc caching for IRQ based IO (Pavel) - Series enabling userspace peer-to-peer DMA (Logan) - BFQ waker fixes (Khazhismel) - Series fixing elevator refcount issues (Christoph, Jinlong) - Series cleaning up references around queue destruction (Christoph) - Series doing quiesce by tagset, enabling cleanups in drivers (Christoph, Chao) - Series untangling the queue kobject and queue references (Christoph) - Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye, Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph) * tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits) blktrace: Fix output non-blktrace event when blk_classic option enabled block: sed-opal: Don't include <linux/kernel.h> sed-opal: allow using IOC_OPAL_SAVE for locking too blk-cgroup: Fix typo in comment block: remove bio_set_op_attrs nvmet: don't open-code NVME_NS_ATTR_RO enumeration nvme-pci: use the tagset alloc/free helpers nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers nvme: consolidate setting the tagset flags nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set block: bio_copy_data_iter nvme-pci: split out a nvme_pci_ctrl_is_dead helper nvme-pci: return early on ctrl state mismatch in nvme_reset_work nvme-pci: rename nvme_disable_io_queues nvme-pci: cleanup nvme_suspend_queue nvme-pci: remove nvme_pci_disable nvme-pci: remove nvme_disable_admin_queue nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl nvme: use nvme_wait_ready in nvme_shutdown_ctrl ...
2022-12-08sed-opal: allow using IOC_OPAL_SAVE for locking tooLuca Boccassi
Usually when closing a crypto device (eg: dm-crypt with LUKS) the volume key is not required, as it requires root privileges anyway, and root can deny access to a disk in many ways regardless. Requiring the volume key to lock the device is a peculiarity of the OPAL specification. Given we might already have saved the key if the user requested it via the 'IOC_OPAL_SAVE' ioctl, we can use that key to lock the device if no key was provided here and the locking range matches, and the user sets the appropriate flag with 'IOC_OPAL_SAVE'. This allows integrating OPAL with tools and libraries that are used to the common behaviour and do not ask for the volume key when closing a device. Callers can always pass a non-zero key and it will be used regardless, as before. Suggested-by: Štěpán Horáček <stepan.horacek@gmail.com> Signed-off-by: Luca Boccassi <bluca@debian.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20221206092913.4625-1-luca.boccassi@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-08block: sed-opal: kmalloc the cmd/resp buffersSerge Semin
In accordance with [1] the DMA-able memory buffers must be cacheline-aligned otherwise the cache writing-back and invalidation performed during the mapping may cause the adjacent data being lost. It's specifically required for the DMA-noncoherent platforms [2]. Seeing the opal_dev.{cmd,resp} buffers are implicitly used for DMAs in the NVME and SCSI/SD drivers in framework of the nvme_sec_submit() and sd_sec_submit() methods respectively they must be cacheline-aligned to prevent the denoted problem. One of the option to guarantee that is to kmalloc the buffers [2]. Let's explicitly allocate them then instead of embedding into the opal_dev structure instance. Note this fix was inspired by the commit c94b7f9bab22 ("nvme-hwmon: kmalloc the NVME SMART log buffer"). [1] Documentation/core-api/dma-api.rst [2] Documentation/core-api/dma-api-howto.rst Fixes: 455a7b238cd6 ("block: Add Sed-opal library") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20221107203944.31686-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-22block: sed-opal: Add ioctl to return device statusdougmill@linux.vnet.ibm.com
Provide a mechanism to retrieve basic status information about the device, including the "supported" flag indicating whether SED-OPAL is supported. The information returned is from the various feature descriptors received during the discovery0 step, and so this ioctl does nothing more than perform the discovery0 step and then save the information received. See "struct opal_status" and OPAL_FL_* bits for the status information currently returned. This is necessary to be able to check whether a device is OPAL enabled, set up, locked or unlocked from userspace programs like systemd-cryptsetup and libcryptsetup. Right now we just have to assume the user 'knows' or blindly attempt setup/lock/unlock operations. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Tested-by: Luca Boccassi <bluca@debian.org> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Link: https://lore.kernel.org/r/20220816140713.84893-1-luca.boccassi@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02block: remove genhd.hChristoph Hellwig
There is no good reason to keep genhd.h separate from the main blkdev.h header that includes it. So fold the contents of genhd.h into blkdev.h and remove genhd.h entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12block: sed-opal: Change the check condition for regular session validityRevanth Rajashekar
This patch changes the check condition for the validity/authentication of the session. 1. The Host Session Number(HSN) in the response should match the HSN for the session. 2. The TPER Session Number(TSN) can never be less than 4096 for a regular session. Reference: Section 3.2.2.1 of https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage_Opal_SSC_Application_Note_1-00_1-00-Final.pdf Section 3.3.7.1.1 of https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage_Architecture_Core_Spec_v2.01_r1.00.pdf Co-developed-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com> Signed-off-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-18block: sed-opal: Introduce SUM_SET_LIST parameter and append it using ↵Revanth Rajashekar
'add_token_u64' In function 'activate_lsp', rather than hard-coding the short atom header(0x83), we need to let the function 'add_short_atom_header' append the header based on the parameter being appended. The parameter has been defined in Section 3.1.2.1 of https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage-Opal_Feature_Set_Single_User_Mode_v1-00_r1-00-Final.pdf Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04block: sed-opal: Introduce Opal Datastore UIDRevanth Rajashekar
This patch introduces Opal Datastore UID. The generic read/write table ioctl can use this UID to access the Opal Datastore. Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04block: sed-opal: Add support to read/write opal tables genericallyRevanth Rajashekar
This feature gives the user RW access to any opal table with admin1 authority. The flags described in the new structure determines if the user wants to read/write the data. Flags are checked for valid values in order to allow future features to be added to the ioctl. The user can provide the desired table's UID. Also, the ioctl provides a size and offset field and internally will loop data accesses to return the full data block. Read overrun is prevented by the initiator's sec_send_recv() backend. The ioctl provides a private field with the intention to accommodate any future expansions to the ioctl. Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04block: sed-opal: Generalizing write data to any opal tableRevanth Rajashekar
This patch refactors the existing "write_shadowmbr" func and creates a new generalized function "generic_table_write_data", to write data to any opal table. Also, a few cleanups are included in this patch. Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-03block: sed-opal: fix sparse warning: convert __be64 dataRandy Dunlap
sparse warns about incorrect type when using __be64 data. It is not being converted to CPU-endian but it should be. Fixes these sparse warnings: ../block/sed-opal.c:375:20: warning: incorrect type in assignment (different base types) ../block/sed-opal.c:375:20: expected unsigned long long [usertype] align ../block/sed-opal.c:375:20: got restricted __be64 const [usertype] alignment_granularity ../block/sed-opal.c:376:25: warning: incorrect type in assignment (different base types) ../block/sed-opal.c:376:25: expected unsigned long long [usertype] lowest_lba ../block/sed-opal.c:376:25: got restricted __be64 const [usertype] lowest_aligned_lba Fixes: 455a7b238cd6 ("block: Add Sed-opal library") Cc: Scott Bauer <scott.bauer@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: linux-block@vger.kernel.org Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-03block: sed-opal: fix sparse warning: obsolete array init.Randy Dunlap
Fix sparse warning: (missing '=') ../block/sed-opal.c:133:17: warning: obsolete array initializer, use C99 syntax Fixes: ff91064ea37c ("block: sed-opal: check size of shadow mbr") Cc: linux-block@vger.kernel.org Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Cc: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20block: sed-opal: Remove always false conditional statementRevanth Rajashekar
In the function 'response_parse', num_entries will never be 0 as slen is checked for 0. Hence, the condition 'if (num_entries == 0)' can never be true. Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20block: sed-opal: Add/remove spacesRevanth Rajashekar
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-29block: sed-opal: check size of shadow mbrJonas Rabenstein
Check whether the shadow mbr does fit in the provided space on the target. Also a proper firmware should handle this case and return an error we may prevent problems or even damage with crappy firmwares. Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-29block: sed-opal: ioctl for writing to shadow mbrJonas Rabenstein
Allow modification of the shadow mbr. If the shadow mbr is not marked as done, this data will be presented read only as the device content. Only after marking the shadow mbr as done and unlocking a locking range the actual content is accessible. Co-authored-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-29block: sed-opal: add ioctl for done-mark of shadow mbrJonas Rabenstein
Enable users to mark the shadow mbr as done without completely deactivating the shadow mbr feature. This may be useful on reboots, when the power to the disk is not disconnected in between and the shadow mbr stores the required boot files. Of course, this saves also the (few) commands required to enable the feature if it is already enabled and one only wants to mark the shadow mbr as done. Co-authored-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-29block: sed-opal: "Never True" conditionsRevanth Rajashekar
'who' an unsigned variable in stucture opal_session_info can never be lesser than zero. Hence, the condition "who < OPAL_ADMIN1" can never be true. Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-29block: sed-opal: PSID reverttper capabilityRevanth Rajashekar
PSID is a 32 character password printed on the drive label, to prove its physical access. This PSID reverttper function is very useful to regain the control over the drive when it is locked and the user can no longer access it because of some failures. However, *all the data on the drive is completely erased*. This method is advisable only when the user is exhausted of all other recovery methods. PSID capabilities are described in: https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage-Opal_Feature_Set_PSID_v1.00_r1.00.pdf Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30block: switch all files cleared marked as GPLv2 to SPDX tagsChristoph Hellwig
All these files have some form of the usual GPLv2 boilerplate. Switch them to use SPDX tags instead. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: rename next to execute_stepsDavid Kozub
As the function is responsible for executing the individual steps supplied in the steps argument, execute_steps is a more descriptive name than the rather generic next. Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: don't repeat opal_discovery0 in each steps arrayDavid Kozub
Originally each of the opal functions that call next include opal_discovery0 in the array of steps. This is superfluous and can be done always inside next. Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: pass steps via argument rather than via opal_devDavid Kozub
The steps argument is only read by the next function, so it can be passed directly as an argument rather than via opal_dev. Normally, the steps is an array on the stack, so the pointer stops being valid then the function that set opal_dev.steps returns. If opal_dev.steps was not set to NULL before return it would become a dangling pointer. When the steps are passed as argument this becomes easier to see and more difficult to misuse. Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: use named Opal tokens instead of integer literalsDavid Kozub
Replace integer literals by Opal tokens defined in opal_proto.h where possible. Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: unify retrieval of table columnsDavid Kozub
Instead of having multiple places defining the same argument list to get a specific column of a sed-opal table, provide a generic version and call it from those functions. Co-authored-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: add token for OPAL_LIFECYCLEDavid Kozub
Define OPAL_LIFECYCLE token and use it instead of literals in get_lsp_lifecycle. Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: split generation of bytestring header and contentJonas Rabenstein
Split the header generation from the (normal) memcpy part if a bytestring is copied into the command buffer. This allows in-place generation of the bytestring content. For example, copy_from_user may be used without an intermediate buffer. Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: print failed function addressJonas Rabenstein
Add function address (and if available its symbol) to the message if a step function fails. Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: reuse response_get_token to decrease code duplicationDavid Kozub
response_get_token had already been in place, its functionality had been duplicated within response_get_{u64,bytestring} with the same error handling. Unify the handling by reusing response_get_token within the other functions. Co-authored-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: unify error handling of responsesDavid Kozub
response_get_{string,u64} include error handling for argument resp being NULL but response_get_token does not handle this. Make all three of response_get_{string,u64,token} handle NULL resp in the same way. Co-authored-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: unify cmd startDavid Kozub
Every step starts with resetting the cmd buffer as well as the comid and constructs the appropriate OPAL_CALL command. Consequently, those actions may be combined into one generic function. On should take care that the opening and closing tokens for the argument list are already emitted by cmd_start and cmd_finalize respectively and thus must not be additionally added. Co-authored-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: close parameter list in cmd_finalizeDavid Kozub
Every step ends by calling cmd_finalize (via finalize_and_send) yet every step adds the token OPAL_ENDLIST on its own. Moving this into cmd_finalize decreases code duplication. Co-authored-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: unify space check in add_token_*Jonas Rabenstein
All add_token_* functions have a common set of conditions that have to be checked. Use a common function for those checks in order to avoid different behaviour as well as code duplication. Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Co-authored-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: use correct macro for method lengthJonas Rabenstein
Also the values of OPAL_UID_LENGTH and OPAL_METHOD_LENGTH are the same, it is weird to use OPAL_UID_LENGTH for the definition of the methods. Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: fix typos and formattingDavid Kozub
This should make no change in functionality. The formatting changes were triggered by checkpatch.pl. Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06block: sed-opal: fix IOC_OPAL_ENABLE_DISABLE_MBRDavid Kozub
The implementation of IOC_OPAL_ENABLE_DISABLE_MBR handled the value opal_mbr_data.enable_disable incorrectly: enable_disable is expected to be one of OPAL_MBR_ENABLE(0) or OPAL_MBR_DISABLE(1). enable_disable was passed directly to set_mbr_done and set_mbr_enable_disable where is was interpreted as either OPAL_TRUE(1) or OPAL_FALSE(0). The end result was that calling IOC_OPAL_ENABLE_DISABLE_MBR with OPAL_MBR_ENABLE actually disabled the shadow MBR and vice versa. This patch adds correct conversion from OPAL_MBR_DISABLE/ENABLE to OPAL_FALSE/TRUE. The change affects existing programs using IOC_OPAL_ENABLE_DISABLE_MBR but this is typically used only once when setting up an Opal drive. Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-27 23:03:23 +0000