Age | Commit message (Collapse) | Author |
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Fix mixed indentation to 4-spaces, remove unnecessary suffix from
i2c node name and use lower-case hex. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230118172237.349111-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add binding description for temperature channels. Currently, support for
label and temperature-offset-millicelsius is implemented.
Signed-off-by: Slawomir Stepien <slawomir.stepien@nokia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220525073657.573327-3-sst@poczta.fm
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This will allow binding the driver with the device from the device tree.
This device can work in extended temperature measurement mode, so add it
also to the list of devices that support 'ti,extended-range-enable'.
Signed-off-by: Slawomir Stepien <slawomir.stepien@nokia.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220525073657.573327-2-sst@poczta.fm
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Some devices can operate in an extended temperature mode.
Therefore add a boolean ti,extended-range-enable to be able to
select this feature in the device tree node. Also make sure that this
feature can only be enabled for the devices supporting this feature.
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220517135614.8185-1-holger.brunck@hitachienergy.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This sensor is already supported from the driver, but is missing in the
list of compatible devices in the yaml file.
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220517075626.16809-1-holger.brunck@hitachienergy.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
There's no need to complicate examples with a platform specific macro.
It also complicates example parsing to figure out the number of
interrupt cells in examples (based on bracketing).
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220119015514.2441231-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The LM90-like sensors usually need VCC supply, however this can be
hard-wired to the board main supply (like in SiFive HiFive Unmatched
RISC-V board). Original bindings made VCC supply as required but in
practice several other boards skipped it. Make it optional.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210920181913.338772-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert the National LM90 hwmon sensor bindings to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210920181913.338772-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|