diff options
Diffstat (limited to 'drivers/video/fbdev/Kconfig')
| -rw-r--r-- | drivers/video/fbdev/Kconfig | 123 |
1 files changed, 47 insertions, 76 deletions
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index cfc55273dc5d..0fdf5f46802c 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -3,16 +3,13 @@ # fbdev configuration # -config FB_CMDLINE - bool - config FB_NOTIFY bool menuconfig FB tristate "Support for frame buffer devices" - select FB_CMDLINE select FB_NOTIFY + select VIDEO_CMDLINE help The frame buffer device provides an abstraction for the graphics hardware. It represents the frame buffer of some video hardware and @@ -127,7 +124,7 @@ config FB_PROVIDE_GET_FB_UNMAPPED_AREA depends on FB help Allow generic frame-buffer to provide get_fb_unmapped_area - function. + function to provide shareable character device support on nommu. menuconfig FB_FOREIGN_ENDIAN bool "Framebuffer foreign endianness support" @@ -227,6 +224,7 @@ config FB_CIRRUS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -245,6 +243,7 @@ config FB_PM2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the frame buffer device driver for cards based on the 3D Labs Permedia, Permedia 2 and Permedia 2V chips. @@ -340,6 +339,7 @@ config FB_CYBER2000 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -453,8 +453,9 @@ config FB_ATARI chipset found in Ataris. config FB_OF - bool "Open Firmware frame buffer device support" - depends on (FB = y) && PPC && (!PPC_PSERIES || PCI) + tristate "Open Firmware frame buffer device support" + depends on FB && PPC && (!PPC_PSERIES || PCI) + depends on !DRM_OFDRM select APERTURE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -503,6 +504,7 @@ config FB_CT65550 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. @@ -513,6 +515,7 @@ config FB_ASILIANT select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the frame buffer device driver for the Asiliant 69030 chipset @@ -521,6 +524,7 @@ config FB_IMSTT depends on (FB = y) && PCI select FB_CFB_IMAGEBLIT select FB_MACMODES if PPC_PMAC + select VIDEO_NOMODESET help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. @@ -584,6 +588,7 @@ config FB_TGA select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BITREVERSE + select VIDEO_NOMODESET help This is the frame buffer device driver for generic TGA and SFB+ graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, @@ -601,6 +606,7 @@ config FB_TGA config FB_UVESA tristate "Userspace VESA VGA graphics support" depends on FB && CONNECTOR + depends on !UML select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -776,6 +782,7 @@ config FB_XVR500 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the framebuffer device for the Sun XVR-500 and similar graphics cards based upon the 3DLABS Wildcat chipset. The driver @@ -789,6 +796,7 @@ config FB_XVR2500 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the framebuffer device for the Sun XVR-2500 and similar graphics cards based upon the 3DLABS Wildcat chipset. The driver @@ -815,6 +823,7 @@ config FB_PVR2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -880,6 +889,7 @@ config FB_NVIDIA select FB_CFB_IMAGEBLIT select BITREVERSE select VGASTATE + select VIDEO_NOMODESET help This driver supports graphics boards with the nVidia chips, TNT and newer. For very old chipsets, such as the RIVA128, then use @@ -927,6 +937,7 @@ config FB_RIVA select FB_CFB_IMAGEBLIT select BITREVERSE select VGASTATE + select VIDEO_NOMODESET help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -971,6 +982,7 @@ config FB_I740 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select VGASTATE + select VIDEO_NOMODESET select FB_DDC help This driver supports graphics cards based on Intel740 chip. @@ -983,6 +995,7 @@ config FB_I810 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select VGASTATE + select VIDEO_NOMODESET help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -1033,6 +1046,7 @@ config FB_LE80578 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This driver supports the LE80578 (Vermilion Range) chipset @@ -1050,6 +1064,7 @@ config FB_INTEL select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BOOT_VESA_SUPPORT if FB_INTEL = y + select VIDEO_NOMODESET depends on !DRM_I915 help This driver supports the on-board graphics built in to the Intel @@ -1087,6 +1102,7 @@ config FB_MATROX select FB_CFB_IMAGEBLIT select FB_TILEBLITTING select FB_MACMODES if PPC_PMAC + select VIDEO_NOMODESET help Say Y here if you have a Matrox Millennium, Matrox Millennium II, Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox @@ -1207,6 +1223,7 @@ config FB_RADEON select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MACMODES if PPC + select VIDEO_NOMODESET help Choose this option if you want to use an ATI Radeon graphics card as a framebuffer device. There are both PCI and AGP versions. You @@ -1246,6 +1263,7 @@ config FB_ATY128 select FB_CFB_IMAGEBLIT select FB_BACKLIGHT if FB_ATY128_BACKLIGHT select FB_MACMODES if PPC_PMAC + select VIDEO_NOMODESET help This driver supports graphics boards with the ATI Rage128 chips. Say Y if you have such a graphics board and read @@ -1270,6 +1288,7 @@ config FB_ATY select FB_BACKLIGHT if FB_ATY_BACKLIGHT select FB_MACMODES if PPC select FB_ATY_CT if SPARC64 && PCI + select VIDEO_NOMODESET help This driver supports graphics boards with the ATI Mach64 chips. Say Y if you have such a graphics board. @@ -1320,6 +1339,7 @@ config FB_S3 select FB_TILEBLITTING select FB_SVGALIB select VGASTATE + select VIDEO_NOMODESET select FONT_8x16 if FRAMEBUFFER_CONSOLE help Driver for graphics boards with S3 Trio / S3 Virge chip. @@ -1340,6 +1360,7 @@ config FB_SAVAGE select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select VGASTATE + select VIDEO_NOMODESET help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -1378,6 +1399,7 @@ config FB_SIS select FB_CFB_IMAGEBLIT select BOOT_VESA_SUPPORT if FB_SIS = y select FB_SIS_300 if !FB_SIS_315 + select VIDEO_NOMODESET help This is the frame buffer device driver for the SiS 300, 315, 330 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. @@ -1407,6 +1429,7 @@ config FB_VIA select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select I2C_ALGOBIT + select VIDEO_NOMODESET help This is the frame buffer device driver for Graphics chips of VIA UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/ @@ -1446,6 +1469,7 @@ config FB_NEOMAGIC select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select VGASTATE + select VIDEO_NOMODESET help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -1459,6 +1483,7 @@ config FB_KYRO select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -1473,6 +1498,7 @@ config FB_3DFX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_MODE_HELPERS + select VIDEO_NOMODESET help This driver supports graphics boards with the 3Dfx Banshee, Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have @@ -1502,6 +1528,7 @@ config FB_VOODOO1 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or Voodoo2 (cvg) based graphics card. @@ -1523,6 +1550,7 @@ config FB_VT8623 select FB_TILEBLITTING select FB_SVGALIB select VGASTATE + select VIDEO_NOMODESET select FONT_8x16 if FRAMEBUFFER_CONSOLE help Driver for CastleRock integrated graphics core in the @@ -1536,6 +1564,7 @@ config FB_TRIDENT select FB_CFB_IMAGEBLIT select FB_DDC select FB_MODE_HELPERS + select VIDEO_NOMODESET help This is the frame buffer device driver for Trident PCI/AGP chipsets. Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D @@ -1559,6 +1588,7 @@ config FB_ARK select FB_TILEBLITTING select FB_SVGALIB select VGASTATE + select VIDEO_NOMODESET select FONT_8x16 if FRAMEBUFFER_CONSOLE help Driver for PCI graphics boards with ARK 2000PV chip @@ -1570,6 +1600,7 @@ config FB_PM3 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the frame buffer device driver for the 3DLabs Permedia3 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & @@ -1582,6 +1613,7 @@ config FB_CARMINE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help This is the frame buffer device driver for the Fujitsu Carmine chip. The driver provides two independent frame buffer devices. @@ -1806,23 +1838,6 @@ config FB_FSL_DIU help Framebuffer driver for the Freescale SoC DIU -config FB_W100 - tristate "W100 frame buffer support" - depends on FB && HAS_IOMEM && (ARCH_PXA || COMPILE_TEST) - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. - It can also drive the w3220 chip found on iPAQ hx4700. - - This driver is also available as a module ( = code which can be - inserted and removed from the running kernel whenever you want). The - module will be called w100fb. If you want to compile it as a module, - say M here and read <file:Documentation/kbuild/modules.rst>. - - If unsure, say N. - config FB_SH_MOBILE_LCDC tristate "SuperH Mobile LCDC framebuffer support" depends on FB && HAVE_CLK && HAS_IOMEM @@ -1836,44 +1851,20 @@ config FB_SH_MOBILE_LCDC help Frame buffer driver for the on-chip SH-Mobile LCD controller. -config FB_TMIO - tristate "Toshiba Mobile IO FrameBuffer support" - depends on FB && (MFD_TMIO || COMPILE_TEST) - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - Frame buffer driver for the Toshiba Mobile IO integrated as found - on the Sharp SL-6000 series - - This driver is also available as a module ( = code which can be - inserted and removed from the running kernel whenever you want). The - module will be called tmiofb. If you want to compile it as a module, - say M here and read <file:Documentation/kbuild/modules.rst>. - - If unsure, say N. - -config FB_TMIO_ACCELL - bool "tmiofb acceleration" - depends on FB_TMIO - default y - config FB_S3C tristate "Samsung S3C framebuffer support" depends on FB && HAVE_CLK && HAS_IOMEM - depends on (CPU_S3C2416 || ARCH_S3C64XX) || COMPILE_TEST + depends on ARCH_S3C64XX || COMPILE_TEST select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help Frame buffer driver for the built-in FB controller in the Samsung - SoC line from the S3C2443 onwards, including the S3C2416, S3C2450, - and the S3C64XX series such as the S3C6400 and S3C6410. + SoC line such as the S3C6400 and S3C6410. These chips all have the same basic framebuffer design with the - actual capabilities depending on the chip. For instance the S3C6400 - and S3C6410 support 4 hardware windows whereas the S3C24XX series - currently only have two. + actual capabilities depending on the chip. The S3C6400 + and S3C6410 support 4 hardware windows. Currently the support is only for the S3C6400 and S3C6410 SoCs. @@ -1883,29 +1874,6 @@ config FB_S3C_DEBUG_REGWRITE help Show all register writes via pr_debug() -config FB_S3C2410 - tristate "S3C2410 LCD framebuffer support" - depends on FB && ARCH_S3C24XX - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - Frame buffer driver for the built-in LCD controller in the Samsung - S3C2410 processor. - - This driver is also available as a module ( = code which can be - inserted and removed from the running kernel whenever you want). The - module will be called s3c2410fb. If you want to compile it as a module, - say M here and read <file:Documentation/kbuild/modules.rst>. - - If unsure, say N. -config FB_S3C2410_DEBUG - bool "S3C2410 lcd debug messages" - depends on FB_S3C2410 - help - Turn on debugging messages. Note that you can set/unset at run time - through sysfs - config FB_SM501 tristate "Silicon Motion SM501 framebuffer support" depends on FB && MFD_SM501 @@ -1960,6 +1928,7 @@ config FB_IBM_GXT4500 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Say Y here to enable support for the IBM GXT4000P/6000P and GXT4500P/6500P display adaptor based on Raster Engine RC1000, @@ -2100,6 +2069,7 @@ config FB_MB862XX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers. @@ -2187,6 +2157,7 @@ config FB_HYPERV select FB_CFB_IMAGEBLIT select FB_DEFERRED_IO select DMA_CMA if HAVE_DMA_CONTIGUOUS && CMA + select VIDEO_NOMODESET help This framebuffer driver supports Microsoft Hyper-V Synthetic Video. @@ -2217,7 +2188,6 @@ config FB_SSD1307 select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_DEFERRED_IO - select PWM select FB_BACKLIGHT help This driver implements support for the Solomon SSD1307 @@ -2229,6 +2199,7 @@ config FB_SM712 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_NOMODESET help Frame buffer driver for the Silicon Motion SM710, SM712, SM721 and SM722 chips. |