diff options
Diffstat (limited to 'drivers/usb/dwc3/core.c')
| -rw-r--r-- | drivers/usb/dwc3/core.c | 39 |
1 files changed, 1 insertions, 38 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index c6de1dcf2827..fd82904e1465 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -242,48 +242,11 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) /* * We're resetting only the device side because, if we're in host mode, * XHCI driver will reset the host block. If dwc3 was configured for - * host-only mode or current role is host, then we can return early. + * host-only mode, then we can return early. */ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; - /* - * If the dr_mode is host and the dwc->current_dr_role is not the - * corresponding DWC3_GCTL_PRTCAP_HOST, then the dwc3_core_init_mode - * isn't executed yet. Ensure the phy is ready before the controller - * updates the GCTL.PRTCAPDIR or other settings by soft-resetting - * the phy. - * - * Note: GUSB3PIPECTL[n] and GUSB2PHYCFG[n] are port settings where n - * is port index. If this is a multiport host, then we need to reset - * all active ports. - */ - if (dwc->dr_mode == USB_DR_MODE_HOST) { - u32 usb3_port; - u32 usb2_port; - - usb3_port = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - usb3_port |= DWC3_GUSB3PIPECTL_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); - - usb2_port = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - usb2_port |= DWC3_GUSB2PHYCFG_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); - - /* Small delay for phy reset assertion */ - usleep_range(1000, 2000); - - usb3_port &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); - - usb2_port &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); - - /* Wait for clock synchronization */ - msleep(50); - return 0; - } - reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= DWC3_DCTL_CSFTRST; dwc3_writel(dwc->regs, DWC3_DCTL, reg); |