aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/core/hub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core/hub.c')
-rw-r--r--drivers/usb/core/hub.c94
1 files changed, 76 insertions, 18 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 87480a6e6d93..e38a4124f610 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -47,12 +47,24 @@
#define USB_VENDOR_TEXAS_INSTRUMENTS 0x0451
#define USB_PRODUCT_TUSB8041_USB3 0x8140
#define USB_PRODUCT_TUSB8041_USB2 0x8142
-#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
-#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02
+#define USB_VENDOR_MICROCHIP 0x0424
+#define USB_PRODUCT_USB4913 0x4913
+#define USB_PRODUCT_USB4914 0x4914
+#define USB_PRODUCT_USB4915 0x4915
+#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND BIT(0)
+#define HUB_QUIRK_DISABLE_AUTOSUSPEND BIT(1)
+#define HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL BIT(2)
#define USB_TP_TRANSMISSION_DELAY 40 /* ns */
#define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */
#define USB_PING_RESPONSE_TIME 400 /* ns */
+#define USB_REDUCE_FRAME_INTR_BINTERVAL 9
+
+/*
+ * The SET_ADDRESS request timeout will be 500 ms when
+ * USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT quirk flag is set.
+ */
+#define USB_SHORT_SET_ADDRESS_REQ_TIMEOUT 500 /* ms */
/* Protect struct usb_device->state and ->children members
* Note: Both are also protected by ->dev.sem, except that ->state can
@@ -1904,6 +1916,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
usb_autopm_get_interface_no_resume(intf);
}
+ if ((id->driver_info & HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL) &&
+ desc->endpoint[0].desc.bInterval > USB_REDUCE_FRAME_INTR_BINTERVAL) {
+ desc->endpoint[0].desc.bInterval =
+ USB_REDUCE_FRAME_INTR_BINTERVAL;
+ /* Tell the HCD about the interrupt ep's new bInterval */
+ usb_set_interface(hdev, 0, 0);
+ }
+
if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) {
onboard_hub_create_pdevs(hdev, &hub->onboard_hub_devs);
@@ -2033,9 +2053,19 @@ static void update_port_device_state(struct usb_device *udev)
if (udev->parent) {
hub = usb_hub_to_struct_hub(udev->parent);
- port_dev = hub->ports[udev->portnum - 1];
- WRITE_ONCE(port_dev->state, udev->state);
- sysfs_notify_dirent(port_dev->state_kn);
+
+ /*
+ * The Link Layer Validation System Driver (lvstest)
+ * has a test step to unbind the hub before running the
+ * rest of the procedure. This triggers hub_disconnect
+ * which will set the hub's maxchild to 0, further
+ * resulting in usb_hub_to_struct_hub returning NULL.
+ */
+ if (hub) {
+ port_dev = hub->ports[udev->portnum - 1];
+ WRITE_ONCE(port_dev->state, udev->state);
+ sysfs_notify_dirent(port_dev->state_kn);
+ }
}
}
@@ -2368,17 +2398,25 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
}
} else if (desc->bLength == sizeof
(struct usb_otg_descriptor)) {
- /* Set a_alt_hnp_support for legacy otg device */
- err = usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- USB_REQ_SET_FEATURE, 0,
- USB_DEVICE_A_ALT_HNP_SUPPORT,
- 0, NULL, 0,
- USB_CTRL_SET_TIMEOUT);
- if (err < 0)
- dev_err(&udev->dev,
- "set a_alt_hnp_support failed: %d\n",
- err);
+ /*
+ * We are operating on a legacy OTP device
+ * These should be told that they are operating
+ * on the wrong port if we have another port that does
+ * support HNP
+ */
+ if (bus->otg_port != 0) {
+ /* Set a_alt_hnp_support for legacy otg device */
+ err = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, 0,
+ USB_DEVICE_A_ALT_HNP_SUPPORT,
+ 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (err < 0)
+ dev_err(&udev->dev,
+ "set a_alt_hnp_support failed: %d\n",
+ err);
+ }
}
}
#endif
@@ -4626,7 +4664,12 @@ EXPORT_SYMBOL_GPL(usb_ep0_reinit);
static int hub_set_address(struct usb_device *udev, int devnum)
{
int retval;
+ unsigned int timeout_ms = USB_CTRL_SET_TIMEOUT;
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+ struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+
+ if (hub->hdev->quirks & USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT)
+ timeout_ms = USB_SHORT_SET_ADDRESS_REQ_TIMEOUT;
/*
* The host controller will choose the device address,
@@ -4639,11 +4682,11 @@ static int hub_set_address(struct usb_device *udev, int devnum)
if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
if (hcd->driver->address_device)
- retval = hcd->driver->address_device(hcd, udev);
+ retval = hcd->driver->address_device(hcd, udev, timeout_ms);
else
retval = usb_control_msg(udev, usb_sndaddr0pipe(),
USB_REQ_SET_ADDRESS, 0, devnum, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
+ NULL, 0, timeout_ms);
if (retval == 0) {
update_devnum(udev, devnum);
/* Device now using proper address. */
@@ -5895,6 +5938,21 @@ static const struct usb_device_id hub_id_table[] = {
.idVendor = USB_VENDOR_TEXAS_INSTRUMENTS,
.idProduct = USB_PRODUCT_TUSB8041_USB3,
.driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT,
+ .idVendor = USB_VENDOR_MICROCHIP,
+ .idProduct = USB_PRODUCT_USB4913,
+ .driver_info = HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL},
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT,
+ .idVendor = USB_VENDOR_MICROCHIP,
+ .idProduct = USB_PRODUCT_USB4914,
+ .driver_info = HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL},
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT,
+ .idVendor = USB_VENDOR_MICROCHIP,
+ .idProduct = USB_PRODUCT_USB4915,
+ .driver_info = HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL},
{ .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
.bDeviceClass = USB_CLASS_HUB},
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-30 20:25:42 +0000