diff options
Diffstat (limited to 'drivers/tty')
54 files changed, 874 insertions, 14938 deletions
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index 93fd984eb2f5..e15cd6b5bb99 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -259,33 +259,6 @@ config MOXA_SMARTIO This driver can also be built as a module. The module will be called mxser. If you want to do that, say M here. -config SYNCLINK - tristate "Microgate SyncLink card support" - depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API - help - Provides support for the SyncLink ISA and PCI multiprotocol serial - adapters. These adapters support asynchronous and HDLC bit - synchronous communication up to 10Mbps (PCI adapter). - - This driver can only be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called synclink. If you want to do that, say M - here. - -config SYNCLINKMP - tristate "SyncLink Multiport support" - depends on SERIAL_NONSTANDARD && PCI - help - Enable support for the SyncLink Multiport (2 or 4 ports) - serial adapter, running asynchronous and HDLC communications up - to 2.048Mbps. Each ports is independently selectable for - RS-232, V.35, RS-449, RS-530, and X.21 - - This driver may be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called synclinkmp. If you want to do that, say M - here. - config SYNCLINK_GT tristate "SyncLink GT/AC support" depends on SERIAL_NONSTANDARD && PCI diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 020b1cd9294f..b3ccae932660 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -28,8 +28,6 @@ obj-$(CONFIG_NOZOMI) += nozomi.o obj-$(CONFIG_NULL_TTY) += ttynull.o obj-$(CONFIG_ROCKETPORT) += rocket.o obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o -obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o -obj-$(CONFIG_SYNCLINK) += synclink.o obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o obj-$(CONFIG_GOLDFISH_TTY) += goldfish.o obj-$(CONFIG_MIPS_EJTAG_FDC_TTY) += mips_ejtag_fdc.o diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c index c8c5cdfc5e19..cd23a4b05c8f 100644 --- a/drivers/tty/goldfish.c +++ b/drivers/tty/goldfish.c @@ -61,13 +61,13 @@ static void do_rw_io(struct goldfish_tty *qtty, spin_lock_irqsave(&qtty->lock, irq_flags); gf_write_ptr((void *)address, base + GOLDFISH_TTY_REG_DATA_PTR, base + GOLDFISH_TTY_REG_DATA_PTR_HIGH); - writel(count, base + GOLDFISH_TTY_REG_DATA_LEN); + __raw_writel(count, base + GOLDFISH_TTY_REG_DATA_LEN); if (is_write) - writel(GOLDFISH_TTY_CMD_WRITE_BUFFER, + __raw_writel(GOLDFISH_TTY_CMD_WRITE_BUFFER, base + GOLDFISH_TTY_REG_CMD); else - writel(GOLDFISH_TTY_CMD_READ_BUFFER, + __raw_writel(GOLDFISH_TTY_CMD_READ_BUFFER, base + GOLDFISH_TTY_REG_CMD); spin_unlock_irqrestore(&qtty->lock, irq_flags); @@ -142,7 +142,7 @@ static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id) unsigned char *buf; u32 count; - count = readl(base + GOLDFISH_TTY_REG_BYTES_READY); + count = __raw_readl(base + GOLDFISH_TTY_REG_BYTES_READY); if (count == 0) return IRQ_NONE; @@ -159,7 +159,7 @@ static int goldfish_tty_activate(struct tty_port *port, struct tty_struct *tty) { struct goldfish_tty *qtty = container_of(port, struct goldfish_tty, port); - writel(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_REG_CMD); + __raw_writel(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_REG_CMD); return 0; } @@ -167,7 +167,7 @@ static void goldfish_tty_shutdown(struct tty_port *port) { struct goldfish_tty *qtty = container_of(port, struct goldfish_tty, port); - writel(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_REG_CMD); + __raw_writel(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_REG_CMD); } static int goldfish_tty_open(struct tty_struct *tty, struct file *filp) @@ -202,7 +202,7 @@ static int goldfish_tty_chars_in_buffer(struct tty_struct *tty) { struct goldfish_tty *qtty = &goldfish_ttys[tty->index]; void __iomem *base = qtty->base; - return readl(base + GOLDFISH_TTY_REG_BYTES_READY); + return __raw_readl(base + GOLDFISH_TTY_REG_BYTES_READY); } static void goldfish_tty_console_write(struct console *co, const char *b, @@ -357,7 +357,7 @@ static int goldfish_tty_probe(struct platform_device *pdev) * on Ranchu emulator (qemu2) returns 1 here and * driver will use physical addresses. */ - qtty->version = readl(base + GOLDFISH_TTY_REG_VERSION); + qtty->version = __raw_readl(base + GOLDFISH_TTY_REG_VERSION); /* * Goldfish TTY device on Ranchu emulator (qemu2) @@ -376,7 +376,7 @@ static int goldfish_tty_probe(struct platform_device *pdev) } } - writel(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_REG_CMD); + __raw_writel(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_REG_CMD); ret = request_irq(irq, goldfish_tty_interrupt, IRQF_SHARED, "goldfish_tty", qtty); diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c index c66412566efc..056ae21a5121 100644 --- a/drivers/tty/hvc/hvc_opal.c +++ b/drivers/tty/hvc/hvc_opal.c @@ -103,7 +103,7 @@ static void hvc_opal_hvsi_close(struct hvc_struct *hp, int data) notifier_del_irq(hp, data); } -void hvc_opal_hvsi_hangup(struct hvc_struct *hp, int data) +static void hvc_opal_hvsi_hangup(struct hvc_struct *hp, int data) { struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno]; diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c index 7af54d6ed5b8..798f27f40cc2 100644 --- a/drivers/tty/hvc/hvc_vio.c +++ b/drivers/tty/hvc/hvc_vio.c @@ -178,7 +178,7 @@ static void hvterm_hvsi_close(struct hvc_struct *hp, int data) notifier_del_irq(hp, data); } -void hvterm_hvsi_hangup(struct hvc_struct *hp, int data) +static void hvterm_hvsi_hangup(struct hvc_struct *hp, int data) { struct hvterm_priv *pv = hvterm_privs[hp->vtermno]; diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 25f3152089c2..c676fa89ee0b 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -74,7 +74,7 @@ module_param(debug, int, 0600); #define MAX_MTU 1500 #define GSM_NET_TX_TIMEOUT (HZ*10) -/** +/* * struct gsm_mux_net - network interface * * Created when net interface is initialized. @@ -651,6 +651,7 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len, /** * gsm_data_kick - poke the queue * @gsm: GSM Mux + * @dlci: DLCI sending the data * * The tty device has called us to indicate that room has appeared in * the transmit queue. Ram more data into the pipe if we have any @@ -1005,6 +1006,7 @@ static void gsm_control_reply(struct gsm_mux *gsm, int cmd, const u8 *data, * @tty: virtual tty bound to the DLCI * @dlci: DLCI to affect * @modem: modem bits (full EA) + * @clen: command length * * Used when a modem control message or line state inline in adaption * layer 2 is processed. Sort out the local modem state and throttles diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 7e5e36315260..319d68c8a5df 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -396,6 +396,7 @@ static inline int is_utf8_continuation(unsigned char c) /** * is_continuation - multibyte check * @c: byte to check + * @tty: terminal device * * Returns true if the utf8 character 'c' is a multibyte continuation * character and the terminal is in unicode mode. @@ -1668,6 +1669,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, * @cp: input chars * @fp: flags for each char (if NULL, all chars are TTY_NORMAL) * @count: number of input chars in @cp + * @flow: enable flow control * * Called by the terminal driver when a block of characters has * been received. This function must be called from soft contexts diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index d42b854cb7df..861e95043191 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -414,11 +414,9 @@ static void read_mem32(u32 *buf, const void __iomem *mem_addr_start, buf16 = (u16 *) buf; *buf16 = __le16_to_cpu(readw(ptr)); goto out; - break; case 4: /* 4 bytes */ *(buf) = __le32_to_cpu(readl(ptr)); goto out; - break; } while (i < size_bytes) { @@ -460,15 +458,14 @@ static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf, buf16 = (const u16 *)buf; writew(__cpu_to_le16(*buf16), ptr); return 2; - break; case 1: /* * also needs to write 4 bytes in this case * so falling through.. */ + fallthrough; case 4: /* 4 bytes */ writel(__cpu_to_le32(*buf), ptr); return 4; - break; } while (i < size_bytes) { diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 23368cec7ee8..a59f1e062bc6 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -699,6 +699,7 @@ static long pty_unix98_compat_ioctl(struct tty_struct *tty, /** * ptm_unix98_lookup - find a pty master * @driver: ptm driver + * @file: unused * @idx: tty index * * Look up a pty master device. Called under the tty_mutex for now. @@ -715,6 +716,7 @@ static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver, /** * pts_unix98_lookup - find a pty slave * @driver: pts driver + * @file: file pointer to tty * @idx: tty index * * Look up a pty master device. Called under the tty_mutex for now. diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c index c5f0d936b003..aead0c0c9796 100644 --- a/drivers/tty/serdev/core.c +++ b/drivers/tty/serdev/core.c @@ -788,13 +788,10 @@ static int serdev_remove_device(struct device *dev, void *data) */ void serdev_controller_remove(struct serdev_controller *ctrl) { - int dummy; - if (!ctrl) return; - dummy = device_for_each_child(&ctrl->dev, NULL, - serdev_remove_device); + device_for_each_child(&ctrl->dev, NULL, serdev_remove_device); pm_runtime_disable(&ctrl->dev); device_del(&ctrl->dev); } @@ -803,6 +800,7 @@ EXPORT_SYMBOL_GPL(serdev_controller_remove); /** * serdev_driver_register() - Register client driver with serdev core * @sdrv: client driver to be associated with client-device. + * @owner: client driver owner to set. * * This API will register the client driver with the serdev framework. * It is typically called from the driver's module-init function. diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 70d7826788f5..c171ce6db691 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -204,9 +204,6 @@ OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup); #ifdef CONFIG_SERIAL_8250_RT288X -unsigned int au_serial_in(struct uart_port *p, int offset); -void au_serial_out(struct uart_port *p, int offset, int value); - static int __init early_au_setup(struct earlycon_device *dev, const char *opt) { dev->port.serial_in = au_serial_in; diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index fa876e2c13e5..f7d3023f860f 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -572,15 +572,22 @@ static int mtk8250_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); err = mtk8250_runtime_resume(&pdev->dev); if (err) - return err; + goto err_pm_disable; data->line = serial8250_register_8250_port(&uart); - if (data->line < 0) - return data->line; + if (data->line < 0) { + err = data->line; + goto err_pm_disable; + } data->rx_wakeup_irq = platform_get_irq_optional(pdev, 1); return 0; + +err_pm_disable: + pm_runtime_disable(&pdev->dev); + + return err; } static int mtk8250_remove(struct platform_device *pdev) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 562087df7d33..23e0decde33e 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -27,6 +27,7 @@ #include <linux/pm_qos.h> #include <linux/pm_wakeirq.h> #include <linux/dma-mapping.h> +#include <linux/sys_soc.h> #include "8250.h" @@ -41,6 +42,7 @@ */ #define UART_ERRATA_CLOCK_DISABLE (1 << 3) #define UART_HAS_EFR2 BIT(4) +#define UART_HAS_RHR_IT_DIS BIT(5) #define OMAP_UART_FCR_RX_TRIG 6 #define OMAP_UART_FCR_TX_TRIG 4 @@ -94,6 +96,10 @@ #define OMAP_UART_REV_52 0x0502 #define OMAP_UART_REV_63 0x0603 +/* Interrupt Enable Register 2 */ +#define UART_OMAP_IER2 0x1B +#define UART_OMAP_IER2_RHR_IT_DIS BIT(2) + /* Enhanced features register 2 */ #define UART_OMAP_EFR2 0x23 #define UART_OMAP_EFR2_TIMEOUT_BEHAVE BIT(6) @@ -184,11 +190,6 @@ static void omap_8250_mdr1_errataset(struct uart_8250_port *up, struct omap8250_priv *priv) { u8 timeout = 255; - u8 old_mdr1; - - old_mdr1 = serial_in(up, UART_OMAP_MDR1); - if (old_mdr1 == priv->mdr1) - return; serial_out(up, UART_OMAP_MDR1, priv->mdr1); udelay(2); @@ -533,6 +534,11 @@ static void omap_8250_pm(struct uart_port *port, unsigned int state, static void omap_serial_fill_features_erratas(struct uart_8250_port *up, struct omap8250_priv *priv) { + const struct soc_device_attribute k3_soc_devices[] = { + { .family = "AM65X", }, + { .family = "J721E", .revision = "SR1.0" }, + { /* sentinel */ } + }; u32 mvr, scheme; u16 revision, major, minor; @@ -580,6 +586,14 @@ static void omap_serial_fill_features_erratas(struct uart_8250_port *up, default: break; } + + /* + * AM65x SR1.0, AM65x SR2.0 and J721e SR1.0 don't + * don't have RHR_IT_DIS bit in IER2 register. So drop to flag + * to enable errata workaround. + */ + if (soc_device_match(k3_soc_devices)) + priv->habit &= ~UART_HAS_RHR_IT_DIS; } static void omap8250_uart_qos_work(struct work_struct *work) @@ -761,17 +775,27 @@ static void __dma_rx_do_complete(struct uart_8250_port *p) { struct uart_8250_dma *dma = p->dma; struct tty_port *tty_port = &p->port.state->port; + struct omap8250_priv *priv = p->port.private_data; struct dma_chan *rxchan = dma->rxchan; dma_cookie_t cookie; struct dma_tx_state state; int count; int ret; + u32 reg; if (!dma->rx_running) goto out; cookie = dma->rx_cookie; dma->rx_running = 0; + + /* Re-enable RX FIFO interrupt now that transfer is complete */ + if (priv->habit & UART_HAS_RHR_IT_DIS) { + reg = serial_in(p, UART_OMAP_IER2); + reg &= ~UART_OMAP_IER2_RHR_IT_DIS; + serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS); + } + dmaengine_tx_status(rxchan, cookie, &state); count = dma->rx_size - state.residue + state.in_flight_bytes; @@ -867,6 +891,7 @@ static int omap_8250_rx_dma(struct uart_8250_port *p) int err = 0; struct dma_async_tx_descriptor *desc; unsigned long flags; + u32 reg; if (priv->rx_dma_broken) return -EINVAL; @@ -902,6 +927,17 @@ static int omap_8250_rx_dma(struct uart_8250_port *p) dma->rx_cookie = dmaengine_submit(desc); + /* + * Disable RX FIFO interrupt while RX DMA is enabled, else + * spurious interrupt may be raised when data is in the RX FIFO + * but is yet to be drained by DMA. + */ + if (priv->habit & UART_HAS_RHR_IT_DIS) { + reg = serial_in(p, UART_OMAP_IER2); + reg |= UART_OMAP_IER2_RHR_IT_DIS; + serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS); + } + dma_async_issue_pending(dma->rxchan); out: spin_unlock_irqrestore(&priv->rx_dma_lock, flags); @@ -1182,7 +1218,7 @@ static struct omap8250_dma_params am33xx_dma = { static struct omap8250_platdata am654_platdata = { .dma_params = &am654_dma, - .habit = UART_HAS_EFR2, + .habit = UART_HAS_EFR2 | UART_HAS_RHR_IT_DIS, }; static struct omap8250_platdata am33xx_platdata = { diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index d5a513efb261..689d8227f95f 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1964,7 +1964,7 @@ pci_moxa_setup(struct serial_private *priv, * This list is ordered alphabetically by vendor then device. * Specific entries must come before more generic entries. */ -static struct pci_serial_quirk pci_serial_quirks[] __refdata = { +static struct pci_serial_quirk pci_serial_quirks[] = { /* * ADDI-DATA GmbH communication cards <info@addi-data.com> */ diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index e3d10794dbba..35ff6627c61b 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -559,16 +559,13 @@ static int multi_config(struct pcmcia_device *link) */ if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && info->prodid == PRODID_POSSIO_GCC)) { - int err; - if (link->config_index == 1 || link->config_index == 3) { - err = setup_serial(link, info, base2, - link->irq); + setup_serial(link, info, base2, link->irq); base2 = link->resource[0]->start; } else { - err = setup_serial(link, info, link->resource[0]->start, - link->irq); + setup_serial(link, info, link->resource[0]->start, + link->irq); } info->c950ctrl = base2; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 28f22e58639c..34a2899e69c0 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -206,7 +206,7 @@ config SERIAL_MESON config SERIAL_MESON_CONSOLE bool "Support for console on meson" - depends on SERIAL_MESON=y + depends on SERIAL_MESON select SERIAL_CORE_CONSOLE select SERIAL_EARLYCON help @@ -704,22 +704,6 @@ config SERIAL_SH_SCI_DMA depends on SERIAL_SH_SCI && DMA_ENGINE default ARCH_RENESAS -config SERIAL_PNX8XXX - bool "Enable PNX8XXX SoCs' UART Support" - depends on SOC_PNX833X - select SERIAL_CORE - help - If you have a MIPS-based Philips SoC such as PNX8330 and you want - to use serial ports, say Y. Otherwise, say N. - -config SERIAL_PNX8XXX_CONSOLE - bool "Enable PNX8XX0 serial console" - depends on SERIAL_PNX8XXX - select SERIAL_CORE_CONSOLE - help - If you have a MIPS-based Philips SoC such as PNX8330 and you want - to use serial console, say Y. Otherwise, say N. - config SERIAL_HS_LPC32XX tristate "LPC32XX high speed serial port support" depends on ARCH_LPC32XX || COMPILE_TEST @@ -1133,7 +1117,7 @@ config SERIAL_TIMBERDALE config SERIAL_BCM63XX tristate "Broadcom BCM63xx/BCM33xx UART support" select SERIAL_CORE - depends on MIPS || ARM || COMPILE_TEST + depends on COMMON_CLK help This enables the driver for the onchip UART core found on the following chipsets: @@ -1583,6 +1567,38 @@ config SERIAL_MILBEAUT_USIO_CONSOLE receives all kernel messages and warnings and which allows logins in single user mode). +config SERIAL_LITEUART + tristate "LiteUART serial port support" + depends on HAS_IOMEM + depends on OF || COMPILE_TEST + depends on LITEX + select SERIAL_CORE + help + This driver is for the FPGA-based LiteUART serial controller from LiteX + SoC builder. + + Say 'Y' or 'M' here if you wish to use the LiteUART serial controller. + Otherwise, say 'N'. + +config SERIAL_LITEUART_MAX_PORTS + int "Maximum number of LiteUART ports" + depends on SERIAL_LITEUART + default "1" + help + Set this to the maximum number of serial ports you want the driver + to support. + +config SERIAL_LITEUART_CONSOLE + bool "LiteUART serial port console support" + depends on SERIAL_LITEUART=y + select SERIAL_CORE_CONSOLE + help + Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial + controller from LiteX SoC builder as the system console + (the system console is the device which receives all kernel messages + and warnings and which allows logins in single user mode). + Otherwise, say 'N'. + endmenu config SERIAL_MCTRL_GPIO diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index caf167f0c10a..b85d53f9e9ff 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o -obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o obj-$(CONFIG_SERIAL_SA1100) += sa1100.o obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung_tty.o @@ -90,6 +89,7 @@ obj-$(CONFIG_SERIAL_OWL) += owl-uart.o obj-$(CONFIG_SERIAL_RDA) += rda-uart.o obj-$(CONFIG_SERIAL_MILBEAUT_USIO) += milbeaut_usio.o obj-$(CONFIG_SERIAL_SIFIVE) += sifive.o +obj-$(CONFIG_SERIAL_LITEUART) += liteuart.o # GPIOLIB helpers for modem control lines obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 87dc3fc15694..c255476cce28 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2789,7 +2789,7 @@ static const struct of_device_id sbsa_uart_of_match[] = { }; MODULE_DEVICE_TABLE(of, sbsa_uart_of_match); -static const struct acpi_device_id sbsa_uart_acpi_match[] = { +static const struct acpi_device_id __maybe_unused sbsa_uart_acpi_match[] = { { "ARMH0011", 0 }, {}, }; diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index b70877932d47..57c70851f22a 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -175,7 +175,7 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match) */ int __init setup_earlycon(char *buf) { - const struct earlycon_id **p_match; + const struct earlycon_id *match; bool empty_compatible = true; if (!buf || !buf[0]) @@ -185,9 +185,7 @@ int __init setup_earlycon(char *buf) return -EALREADY; again: - for (p_match = __earlycon_table; p_match < __earlycon_table_end; - p_match++) { - const struct earlycon_id *match = *p_match; + for (match = __earlycon_table; match < __earlycon_table_end; match++) { size_t len = strlen(match->name); if (strncmp(buf, match->name, len)) diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c index 3e28be402aef..d87048073abe 100644 --- a/drivers/tty/serial/fsl_linflexuart.c +++ b/drivers/tty/serial/fsl_linflexuart.c @@ -252,23 +252,22 @@ static irqreturn_t linflex_rxint(int irq, void *dev_id) flg = TTY_NORMAL; sport->icount.rx++; - if (status & (LINFLEXD_UARTSR_BOF | LINFLEXD_UARTSR_SZF | - LINFLEXD_UARTSR_FEF | LINFLEXD_UARTSR_PE)) { - if (status & LINFLEXD_UARTSR_SZF) - status |= LINFLEXD_UARTSR_SZF; + if (status & (LINFLEXD_UARTSR_BOF | LINFLEXD_UARTSR_FEF | + LINFLEXD_UARTSR_PE)) { if (status & LINFLEXD_UARTSR_BOF) - status |= LINFLEXD_UARTSR_BOF; + sport->icount.overrun++; if (status & LINFLEXD_UARTSR_FEF) { - if (!rx) + if (!rx) { brk = true; - status |= LINFLEXD_UARTSR_FEF; + sport->icount.brk++; + } else + sport->icount.frame++; } if (status & LINFLEXD_UARTSR_PE) - status |= LINFLEXD_UARTSR_PE; + sport->icount.parity++; } - writel(status | LINFLEXD_UARTSR_RMB | LINFLEXD_UARTSR_DRFRFE, - sport->membase + UARTSR); + writel(status, sport->membase + UARTSR); status = readl(sport->membase + UARTSR); if (brk) { diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 21d519c804cb..182e0ccd60b2 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -545,6 +545,7 @@ static void ifx_spi_hangup(struct tty_struct *tty) /** * ifx_port_activate * @port: our tty port + * @tty: our tty device * * tty port activate method - called for first open. Serialized * with hangup and shutdown by the tty layer. @@ -719,7 +720,7 @@ complete_exit: /** * ifx_spio_io - I/O tasklet - * @data: our SPI device + * @t: tasklet construct used to fetch the SPI device * * Queue data for transmission if possible and then kick off the * transfer. diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index cacf7266a262..425624d794dd 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -30,7 +30,6 @@ #include <linux/dma-mapping.h> #include <asm/irq.h> -#include <linux/platform_data/serial-imx.h> #include <linux/platform_data/dma-imx.h> #include "serial_mctrl_gpio.h" @@ -263,25 +262,6 @@ static struct imx_uart_data imx_uart_devdata[] = { }, }; -static const struct platform_device_id imx_uart_devtype[] = { - { - .name = "imx1-uart", - .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART], - }, { - .name = "imx21-uart", - .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART], - }, { - .name = "imx53-uart", - .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX53_UART], - }, { - .name = "imx6q-uart", - .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX6Q_UART], - }, { - /* sentinel */ - } -}; -MODULE_DEVICE_TABLE(platform, imx_uart_devtype); - static const struct of_device_id imx_uart_dt_ids[] = { { .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], }, { .compatible = "fsl,imx53-uart", .data = &imx_uart_devdata[IMX53_UART], }, @@ -1881,7 +1861,7 @@ static int imx_uart_poll_init(struct uart_port *port) ucr1 |= UCR1_UARTEN; ucr1 &= ~(UCR1_TRDYEN | UCR1_RTSDEN | UCR1_RRDYEN); - ucr2 |= UCR2_RXEN; + ucr2 |= UCR2_RXEN | UCR2_TXEN; ucr2 &= ~UCR2_ATEN; imx_uart_writel(sport, ucr1, UCR1); @@ -2183,70 +2163,6 @@ static struct uart_driver imx_uart_uart_driver = { .cons = IMX_CONSOLE, }; -#ifdef CONFIG_OF -/* - * This function returns 1 iff pdev isn't a device instatiated by dt, 0 iff it - * could successfully get all information from dt or a negative errno. - */ -static int imx_uart_probe_dt(struct imx_port *sport, - struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - int ret; - - sport->devdata = of_device_get_match_data(&pdev->dev); - if (!sport->devdata) - /* no device tree device */ - return 1; - - ret = of_alias_get_id(np, "serial"); - if (ret < 0) { - dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); - return ret; - } - sport->port.line = ret; - - if (of_get_property(np, "uart-has-rtscts", NULL) || - of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */) - sport->have_rtscts = 1; - - if (of_get_property(np, "fsl,dte-mode", NULL)) - sport->dte_mode = 1; - - if (of_get_property(np, "rts-gpios", NULL)) - sport->have_rtsgpio = 1; - - if (of_get_property(np, "fsl,inverted-tx", NULL)) - sport->inverted_tx = 1; - - if (of_get_property(np, "fsl,inverted-rx", NULL)) - sport->inverted_rx = 1; - - return 0; -} -#else -static inline int imx_uart_probe_dt(struct imx_port *sport, - struct platform_device *pdev) -{ - return 1; -} -#endif - -static void imx_uart_probe_pdata(struct imx_port *sport, - struct platform_device *pdev) -{ - struct imxuart_platform_data *pdata = dev_get_platdata(&pdev->dev); - - sport->port.line = pdev->id; - sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data; - - if (!pdata) - return; - - if (pdata->flags & IMXUART_HAVE_RTSCTS) - sport->have_rtscts = 1; -} - static enum hrtimer_restart imx_trigger_start_tx(struct hrtimer *t) { struct imx_port *sport = container_of(t, struct imx_port, trigger_start_tx); @@ -2275,6 +2191,7 @@ static enum hrtimer_restart imx_trigger_stop_tx(struct hrtimer *t) static int imx_uart_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct imx_port *sport; void __iomem *base; int ret = 0; @@ -2286,11 +2203,30 @@ static int imx_uart_probe(struct platform_device *pdev) if (!sport) return -ENOMEM; - ret = imx_uart_probe_dt(sport, pdev); - if (ret > 0) - imx_uart_probe_pdata(sport, pdev); - else if (ret < 0) + sport->devdata = of_device_get_match_data(&pdev->dev); + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); return ret; + } + sport->port.line = ret; + + if (of_get_property(np, "uart-has-rtscts", NULL) || + of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */) + sport->have_rtscts = 1; + + if (of_get_property(np, "fsl,dte-mode", NULL)) + sport->dte_mode = 1; + + if (of_get_property(np, "rts-gpios", NULL)) + sport->have_rtsgpio = 1; + + if (of_get_property(np, "fsl,inverted-tx", NULL)) + sport->inverted_tx = 1; + + if (of_get_property(np, "fsl,inverted-rx", NULL)) + sport->inverted_rx = 1; if (sport->port.line >= ARRAY_SIZE(imx_uart_ports)) { dev_err(&pdev->dev, "serial%d out of range\n", @@ -2639,7 +2575,6 @@ static struct platform_driver imx_uart_platform_driver = { .probe = imx_uart_probe, .remove = imx_uart_remove, - .id_table = imx_uart_devtype, .driver = { .name = "imx-uart", .of_match_table = imx_uart_dt_ids, diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c index c061a7b7bd23..b507a2cec926 100644 --- a/drivers/tty/serial/jsm/jsm_cls.c +++ b/drivers/tty/serial/jsm/jsm_cls.c @@ -397,10 +397,8 @@ static void cls_copy_data_from_uart_to_queue(struct jsm_channel *ch) * which in this case is the break signal. */ if (linestatus & error_mask) { - u8 discard; - linestatus = 0; - discard = readb(&ch->ch_cls_uart->txrx); + readb(&ch->ch_cls_uart->txrx); continue; } diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c index 689774c073ca..512b77195e9f 100644 --- a/drivers/tty/serial/jsm/jsm_tty.c +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -607,7 +607,7 @@ void jsm_input(struct jsm_channel *ch) * Give the Linux ld the flags in the * format it likes. */ - if (*(ch->ch_equeue +tail +i) & UART_LSR_BI) + if (*(ch->ch_equeue + tail + i) & UART_LSR_BI) tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_BREAK); else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE) tty_insert_flip_char(port, *(ch->ch_rqueue +tail +i), TTY_PARITY); diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c new file mode 100644 index 000000000000..64842f3539e1 --- /dev/null +++ b/drivers/tty/serial/liteuart.c @@ -0,0 +1,404 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * LiteUART serial controller (LiteX) Driver + * + * Copyright (C) 2019-2020 Antmicro <www.antmicro.com> + */ + +#include <linux/console.h> +#include <linux/litex.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/tty_flip.h> +#include <linux/xarray.h> + +/* + * CSRs definitions (base address offsets + width) + * + * The definitions below are true for LiteX SoC configured for 8-bit CSR Bus, + * 32-bit aligned. + * + * Supporting other configurations might require new definitions or a more + * generic way of indexing the LiteX CSRs. + * + * For more details on how CSRs are defined and handled in LiteX, see comments + * in the LiteX SoC Driver: drivers/soc/litex/litex_soc_ctrl.c + */ +#define OFF_RXTX 0x00 +#define OFF_TXFULL 0x04 +#define OFF_RXEMPTY 0x08 +#define OFF_EV_STATUS 0x0c +#define OFF_EV_PENDING 0x10 +#define OFF_EV_ENABLE 0x14 + +/* events */ +#define EV_TX 0x1 +#define EV_RX 0x2 + +struct liteuart_port { + struct uart_port port; + struct timer_list timer; + u32 id; +}; + +#define to_liteuart_port(port) container_of(port, struct liteuart_port, port) + +static DEFINE_XARRAY_FLAGS(liteuart_array, XA_FLAGS_ALLOC); + +#ifdef CONFIG_SERIAL_LITEUART_CONSOLE +static struct console liteuart_console; +#endif + +static struct uart_driver liteuart_driver = { + .owner = THIS_MODULE, + .driver_name = "liteuart", + .dev_name = "ttyLXU", + .major = 0, + .minor = 0, + .nr = CONFIG_SERIAL_LITEUART_MAX_PORTS, +#ifdef CONFIG_SERIAL_LITEUART_CONSOLE + .cons = &liteuart_console, +#endif +}; + +static void liteuart_timer(struct timer_list *t) +{ + struct liteuart_port *uart = from_timer(uart, t, timer); + struct uart_port *port = &uart->port; + unsigned char __iomem *membase = port->membase; + unsigned int flg = TTY_NORMAL; + int ch; + unsigned long status; + + while ((status = !litex_read8(membase + OFF_RXEMPTY)) == 1) { + ch = litex_read8(membase + OFF_RXTX); + port->icount.rx++; + + /* necessary for RXEMPTY to refresh its value */ + litex_write8(membase + OFF_EV_PENDING, EV_TX | EV_RX); + + /* no overflow bits in status */ + if (!(uart_handle_sysrq_char(port, ch))) + uart_insert_char(port, status, 0, ch, flg); + + tty_flip_buffer_push(&port->state->port); + } + + mod_timer(&uart->timer, jiffies + uart_poll_timeout(port)); +} + +static void liteuart_putchar(struct uart_port *port, int ch) +{ + while (litex_read8(port->membase + OFF_TXFULL)) + cpu_relax(); + + litex_write8(port->membase + OFF_RXTX, ch); +} + +static unsigned int liteuart_tx_empty(struct uart_port *port) +{ + /* not really tx empty, just checking if tx is not full */ + if (!litex_read8(port->membase + OFF_TXFULL)) + return TIOCSER_TEMT; + + return 0; +} + +static void liteuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* modem control register is not present in LiteUART */ +} + +static unsigned int liteuart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void liteuart_stop_tx(struct uart_port *port) +{ +} + +static void liteuart_start_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned char ch; + + if (unlikely(port->x_char)) { + litex_write8(port->membase + OFF_RXTX, port->x_char); + port->icount.tx++; + port->x_char = 0; + } else if (!uart_circ_empty(xmit)) { + while (xmit->head != xmit->tail) { + ch = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + liteuart_putchar(port, ch); + } + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void liteuart_stop_rx(struct uart_port *port) +{ + struct liteuart_port *uart = to_liteuart_port(port); + + /* just delete timer */ + del_timer(&uart->timer); +} + +static void liteuart_break_ctl(struct uart_port *port, int break_state) +{ + /* LiteUART doesn't support sending break signal */ +} + +static int liteuart_startup(struct uart_port *port) +{ + struct liteuart_port *uart = to_liteuart_port(port); + + /* disable events */ + litex_write8(port->membase + OFF_EV_ENABLE, 0); + + /* prepare timer for polling */ + timer_setup(&uart->timer, liteuart_timer, 0); + mod_timer(&uart->timer, jiffies + uart_poll_timeout(port)); + + return 0; +} + +static void liteuart_shutdown(struct uart_port *port) +{ +} + +static void liteuart_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* update baudrate */ + baud = uart_get_baud_rate(port, new, old, 0, 460800); + uart_update_timeout(port, new->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *liteuart_type(struct uart_port *port) +{ + return "liteuart"; +} + +static void liteuart_release_port(struct uart_port *port) +{ +} + +static int liteuart_request_port(struct uart_port *port) +{ + return 0; +} + +static void liteuart_config_port(struct uart_port *port, int flags) +{ + /* + * Driver core for serial ports forces a non-zero value for port type. + * Write an arbitrary value here to accommodate the serial core driver, + * as ID part of UAPI is redundant. + */ + port->type = 1; +} + +static int liteuart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (port->type != PORT_UNKNOWN && ser->type != 1) + return -EINVAL; + + return 0; +} + +static const struct uart_ops liteuart_ops = { + .tx_empty = liteuart_tx_empty, + .set_mctrl = liteuart_set_mctrl, + .get_mctrl = liteuart_get_mctrl, + .stop_tx = liteuart_stop_tx, + .start_tx = liteuart_start_tx, + .stop_rx = liteuart_stop_rx, + .break_ctl = liteuart_break_ctl, + .startup = liteuart_startup, + .shutdown = liteuart_shutdown, + .set_termios = liteuart_set_termios, + .type = liteuart_type, + .release_port = liteuart_release_port, + .request_port = liteuart_request_port, + .config_port = liteuart_config_port, + .verify_port = liteuart_verify_port, +}; + +static int liteuart_probe(struct platform_device *pdev) +{ + struct liteuart_port *uart; + struct uart_port *port; + struct xa_limit limit; + int dev_id, ret; + + /* look for aliases; auto-enumerate for free index if not found */ + dev_id = of_alias_get_id(pdev->dev.of_node, "serial"); + if (dev_id < 0) + limit = XA_LIMIT(0, CONFIG_SERIAL_LITEUART_MAX_PORTS); + else + limit = XA_LIMIT(dev_id, dev_id); + + uart = devm_kzalloc(&pdev->dev, sizeof(struct liteuart_port), GFP_KERNEL); + if (!uart) + return -ENOMEM; + + ret = xa_alloc(&liteuart_array, &dev_id, uart, limit, GFP_KERNEL); + if (ret) + return ret; + + uart->id = dev_id; + port = &uart->port; + + /* get membase */ + port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); + if (!port->membase) + return -ENXIO; + + /* values not from device tree */ + port->dev = &pdev->dev; + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &liteuart_ops; + port->regshift = 2; + port->fifosize = 16; + port->iobase = 1; + port->type = PORT_UNKNOWN; + port->line = dev_id; + spin_lock_init(&port->lock); + + return uart_add_one_port(&liteuart_driver, &uart->port); +} + +static int liteuart_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct liteuart_port *uart = to_liteuart_port(port); + + xa_erase(&liteuart_array, uart->id); + + return 0; +} + +static const struct of_device_id liteuart_of_match[] = { + { .compatible = "litex,liteuart" }, + {} +}; +MODULE_DEVICE_TABLE(of, liteuart_of_match); + +static struct platform_driver liteuart_platform_driver = { + .probe = liteuart_probe, + .remove = liteuart_remove, + .driver = { + .name = "liteuart", + .of_match_table = liteuart_of_match, + }, +}; + +#ifdef CONFIG_SERIAL_LITEUART_CONSOLE + +static void liteuart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct liteuart_port *uart; + struct uart_port *port; + unsigned long flags; + + uart = (struct liteuart_port *)xa_load(&liteuart_array, co->index); + port = &uart->port; + + spin_lock_irqsave(&port->lock, flags); + uart_console_write(port, s, count, liteuart_putchar); + spin_unlock_irqrestore(&port->lock, flags); +} + +static int liteuart_console_setup(struct console *co, char *options) +{ + struct liteuart_port *uart; + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + uart = (struct liteuart_port *)xa_load(&liteuart_array, co->index); + if (!uart) + return -ENODEV; + + port = &uart->port; + if (!port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console liteuart_console = { + .name = "liteuart", + .write = liteuart_console_write, + .device = uart_console_device, + .setup = liteuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &liteuart_driver, +}; + +static int __init liteuart_console_init(void) +{ + register_console(&liteuart_console); + + return 0; +} +console_initcall(liteuart_console_init); +#endif /* CONFIG_SERIAL_LITEUART_CONSOLE */ + +static int __init liteuart_init(void) +{ + int res; + + res = uart_register_driver(&liteuart_driver); + if (res) + return res; + + res = platform_driver_register(&liteuart_platform_driver); + if (res) { + uart_unregister_driver(&liteuart_driver); + return res; + } + + return 0; +} + +static void __exit liteuart_exit(void) +{ + platform_driver_unregister(&liteuart_platform_driver); + uart_unregister_driver(&liteuart_driver); +} + +module_init(liteuart_init); +module_exit(liteuart_exit); + +MODULE_AUTHOR("Antmicro <www.antmicro.com>"); +MODULE_DESCRIPTION("LiteUART serial driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform: liteuart"); diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index b5898c932036..1fa098d7aec4 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -241,12 +241,11 @@ static unsigned int __serial_get_clock_div(unsigned long uartclk, static void __serial_uart_flush(struct uart_port *port) { - u32 tmp; int cnt = 0; while ((readl(LPC32XX_HSUART_LEVEL(port->membase)) > 0) && (cnt++ < FIFO_READ_LIMIT)) - tmp = readl(LPC32XX_HSUART_FIFO(port->membase)); + readl(LPC32XX_HSUART_FIFO(port->membase)); } static void __serial_lpc32xx_rx(struct uart_port *port) diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 21130af106bb..9795b2e8b0b2 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -15,8 +15,8 @@ #include <linux/device.h> #include <linux/gpio/driver.h> #include <linux/module.h> -#include <linux/of.h> -#include <linux/of_device.h> +#include <linux/mod_devicetable.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/serial_core.h> #include <linux/serial.h> @@ -267,7 +267,7 @@ struct max310x_one { container_of(_port, struct max310x_one, port) struct max310x_port { - struct max310x_devtype *devtype; + const struct max310x_devtype *devtype; struct regmap *regmap; struct clk *clk; #ifdef CONFIG_GPIOLIB @@ -1269,11 +1269,10 @@ static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset, } #endif -static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, +static int max310x_probe(struct device *dev, const struct max310x_devtype *devtype, struct regmap *regmap, int irq) { int i, ret, fmin, fmax, freq, uartclk; - struct clk *clk_osc, *clk_xtal; struct max310x_port *s; bool xtal = false; @@ -1287,23 +1286,24 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, return -ENOMEM; } - clk_osc = devm_clk_get(dev, "osc"); - clk_xtal = devm_clk_get(dev, "xtal"); - if (!IS_ERR(clk_osc)) { - s->clk = clk_osc; + s->clk = devm_clk_get_optional(dev, "osc"); + if (IS_ERR(s->clk)) + return PTR_ERR(s->clk); + if (s->clk) { fmin = 500000; fmax = 35000000; - } else if (!IS_ERR(clk_xtal)) { - s->clk = clk_xtal; - fmin = 1000000; - fmax = 4000000; - xtal = true; - } else if (PTR_ERR(clk_osc) == -EPROBE_DEFER || - PTR_ERR(clk_xtal) == -EPROBE_DEFER) { - return -EPROBE_DEFER; } else { - dev_err(dev, "Cannot get clock\n"); - return -EINVAL; + s->clk = devm_clk_get_optional(dev, "xtal"); + if (IS_ERR(s->clk)) + return PTR_ERR(s->clk); + if (s->clk) { + fmin = 1000000; + fmax = 4000000; + xtal = true; + } else { + dev_err(dev, "Cannot get clock\n"); + return -EINVAL; + } } ret = clk_prepare_enable(s->clk); @@ -1478,7 +1478,7 @@ static struct regmap_config regcfg = { #ifdef CONFIG_SPI_MASTER static int max310x_spi_probe(struct spi_device *spi) { - struct max310x_devtype *devtype; + const struct max310x_devtype *devtype; struct regmap *regmap; int ret; @@ -1490,18 +1490,9 @@ static int max310x_spi_probe(struct spi_device *spi) if (ret) return ret; - if (spi->dev.of_node) { - const struct of_device_id *of_id = - of_match_device(max310x_dt_ids, &spi->dev); - if (!of_id) - return -ENODEV; - - devtype = (struct max310x_devtype *)of_id->data; - } else { - const struct spi_device_id *id_entry = spi_get_device_id(spi); - - devtype = (struct max310x_devtype *)id_entry->driver_data; - } + devtype = device_get_match_data(&spi->dev); + if (!devtype) + devtype = (struct max310x_devtype *)spi_get_device_id(spi)->driver_data; regcfg.max_register = devtype->nr * 0x20 - 1; regmap = devm_regmap_init_spi(spi, ®cfg); @@ -1526,7 +1517,7 @@ MODULE_DEVICE_TABLE(spi, max310x_id_table); static struct spi_driver max310x_spi_driver = { .driver = { .name = MAX310X_NAME, - .of_match_table = of_match_ptr(max310x_dt_ids), + .of_match_table = max310x_dt_ids, .pm = &max310x_pm_ops, }, .probe = max310x_spi_probe, diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index d2c08b760f83..69eeef9edfa5 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -604,7 +604,6 @@ static int __init meson_serial_console_init(void) register_console(&meson_serial_console); return 0; } -console_initcall(meson_serial_console_init); static void meson_serial_early_console_write(struct console *co, const char *s, @@ -634,6 +633,9 @@ OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart", #define MESON_SERIAL_CONSOLE (&meson_serial_console) #else +static int __init meson_serial_console_init(void) { + return 0; +} #define MESON_SERIAL_CONSOLE NULL #endif @@ -824,6 +826,10 @@ static int __init meson_uart_init(void) { int ret; + ret = meson_serial_console_init(); + if (ret) + return ret; + ret = uart_register_driver(&meson_uart_driver); if (ret) return ret; diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 87f005e5d2af..770c182e2208 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -426,7 +426,6 @@ static void msm_complete_tx_dma(void *args) struct circ_buf *xmit = &port->state->xmit; struct msm_dma *dma = &msm_port->tx_dma; struct dma_tx_state state; - enum dma_status status; unsigned long flags; unsigned int count; u32 val; @@ -437,7 +436,7 @@ static void msm_complete_tx_dma(void *args) if (!dma->count) goto done; - status = dmaengine_tx_status(dma->chan, dma->cookie, &state); + dmaengine_tx_status(dma->chan, dma->cookie, &state); dma_unmap_single(port->dev, dma->phys, dma->count, dma->dir); @@ -1525,7 +1524,7 @@ static void msm_poll_put_char(struct uart_port *port, unsigned char c) } #endif -static struct uart_ops msm_uart_pops = { +static const struct uart_ops msm_uart_pops = { .tx_empty = msm_tx_empty, .set_mctrl = msm_set_mctrl, .get_mctrl = msm_get_mctrl, diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index b784323a6a7b..8ecf622602cb 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -443,24 +443,16 @@ struct mxs_auart_port { bool ms_irq_enabled; }; -static const struct platform_device_id mxs_auart_devtype[] = { - { .name = "mxs-auart-imx23", .driver_data = IMX23_AUART }, - { .name = "mxs-auart-imx28", .driver_data = IMX28_AUART }, - { .name = "as-auart-asm9260", .driver_data = ASM9260_AUART }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(platform, mxs_auart_devtype); - static const struct of_device_id mxs_auart_dt_ids[] = { { .compatible = "fsl,imx28-auart", - .data = &mxs_auart_devtype[IMX28_AUART] + .data = (const void *)IMX28_AUART }, { .compatible = "fsl,imx23-auart", - .data = &mxs_auart_devtype[IMX23_AUART] + .data = (const void *)IMX23_AUART }, { .compatible = "alphascale,asm9260-auart", - .data = &mxs_auart_devtype[ASM9260_AUART] + .data = (const void *)ASM9260_AUART }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids); @@ -1639,8 +1631,6 @@ static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s) static int mxs_auart_probe(struct platform_device *pdev) { - const struct of_device_id *of_id = - of_match_device(mxs_auart_dt_ids, &pdev->dev); struct mxs_auart_port *s; u32 version; int ret, irq; @@ -1663,10 +1653,7 @@ static int mxs_auart_probe(struct platform_device *pdev) return -EINVAL; } - if (of_id) { - pdev->id_entry = of_id->data; - s->devtype = pdev->id_entry->driver_data; - } + s->devtype = (enum mxs_auart_type)of_device_get_match_data(&pdev->dev); ret = mxs_get_clks(s, pdev); if (ret) diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 063484b22523..d6aef8a1f0a4 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1693,22 +1693,26 @@ static int __init pmz_probe(void) #else +/* On PCI PowerMacs, pmz_probe() does an explicit search of the OpenFirmware + * tree to obtain the device_nodes needed to start the console before the + * macio driver. On Macs without OpenFirmware, global platform_devices take + * the place of those device_nodes. + */ extern struct platform_device scc_a_pdev, scc_b_pdev; static int __init pmz_init_port(struct uart_pmac_port *uap) { - struct resource *r_ports; - int irq; + struct resource *r_ports, *r_irq; r_ports = platform_get_resource(uap->pdev, IORESOURCE_MEM, 0); - irq = platform_get_irq(uap->pdev, 0); - if (!r_ports || irq <= 0) + r_irq = platform_get_resource(uap->pdev, IORESOURCE_IRQ, 0); + if (!r_ports || !r_irq) return -ENODEV; uap->port.mapbase = r_ports->start; uap->port.membase = (unsigned char __iomem *) r_ports->start; uap->port.iotype = UPIO_MEM; - uap->port.irq = irq; + uap->port.irq = r_irq->start; uap->port.uartclk = ZS_CLOCK; uap->port.fifosize = 1; uap->port.ops = &pmz_pops; diff --git a/drivers/tty/serial/pmac_zilog.h b/drivers/tty/serial/pmac_zilog.h index bb874e76810e..fa85b0de5c2f 100644 --- a/drivers/tty/serial/pmac_zilog.h +++ b/drivers/tty/serial/pmac_zilog.h @@ -362,10 +362,10 @@ static inline void zssync(struct uart_pmac_port *port) /* Misc macros */ #define ZS_CLEARERR(port) (write_zsreg(port, 0, ERR_RES)) -#define ZS_CLEARFIFO(port) do { volatile unsigned char garbage; \ - garbage = read_zsdata(port); \ - garbage = read_zsdata(port); \ - garbage = read_zsdata(port); \ +#define ZS_CLEARFIFO(port) do { \ + read_zsdata(port); \ + read_zsdata(port); \ + read_zsdata(port); \ } while(0) #define ZS_IS_CONS(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CONS) diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c deleted file mode 100644 index 972d94e8d32b..000000000000 --- a/drivers/tty/serial/pnx8xxx_uart.c +++ /dev/null @@ -1,858 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * UART driver for PNX8XXX SoCs - * - * Author: Per Hallsmark per.hallsmark@mvista.com - * Ported to 2.6 kernel by EmbeddedAlley - * Reworked by Vitaly Wool <vitalywool@gmail.com> - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Copyright (C) 2000 Deep Blue Solutions Ltd. - */ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial_core.h> -#include <linux/serial.h> -#include <linux/serial_pnx8xxx.h> - -#include <asm/io.h> -#include <asm/irq.h> - -/* We'll be using StrongARM sa1100 serial port major/minor */ -#define SERIAL_PNX8XXX_MAJOR 204 -#define MINOR_START 5 - -#define NR_PORTS 2 - -#define PNX8XXX_ISR_PASS_LIMIT 256 - -/* - * Convert from ignore_status_mask or read_status_mask to FIFO - * and interrupt status bits - */ -#define SM_TO_FIFO(x) ((x) >> 10) -#define SM_TO_ISTAT(x) ((x) & 0x000001ff) -#define FIFO_TO_SM(x) ((x) << 10) -#define ISTAT_TO_SM(x) ((x) & 0x000001ff) - -/* - * This is the size of our serial port register set. - */ -#define UART_PORT_SIZE 0x1000 - -/* - * This determines how often we check the modem status signals - * for any change. They generally aren't connected to an IRQ - * so we have to poll them. We also check immediately before - * filling the TX fifo incase CTS has been dropped. - */ -#define MCTRL_TIMEOUT (250*HZ/1000) - -extern struct pnx8xxx_port pnx8xxx_ports[]; - -static inline int serial_in(struct pnx8xxx_port *sport, int offset) -{ - return (__raw_readl(sport->port.membase + offset)); -} - -static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value) -{ - __raw_writel(value, sport->port.membase + offset); -} - -/* - * Handle any change of modem status signal since we were last called. - */ -static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport) -{ - unsigned int status, changed; - - status = sport->port.ops->get_mctrl(&sport->port); - changed = status ^ sport->old_status; - - if (changed == 0) - return; - - sport->old_status = status; - - if (changed & TIOCM_RI) - sport->port.icount.rng++; - if (changed & TIOCM_DSR) - sport->port.icount.dsr++; - if (changed & TIOCM_CAR) - uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); - if (changed & TIOCM_CTS) - uart_handle_cts_change(&sport->port, status & TIOCM_CTS); - - wake_up_interruptible(&sport->port.state->port.delta_msr_wait); -} - -/* - * This is our per-port timeout handler, for checking the - * modem status signals. - */ -static void pnx8xxx_timeout(struct timer_list *t) -{ - struct pnx8xxx_port *sport = from_timer(sport, t, timer); - unsigned long flags; - - if (sport->port.state) { - spin_lock_irqsave(&sport->port.lock, flags); - pnx8xxx_mctrl_check(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); - - mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); - } -} - -/* - * interrupts disabled on entry - */ -static void pnx8xxx_stop_tx(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - u32 ien; - - /* Disable TX intr */ - ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX); - - /* Clear all pending TX intr */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); -} - -/* - * interrupts may not be disabled on entry - */ -static void pnx8xxx_start_tx(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - u32 ien; - - /* Clear all pending TX intr */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); - - /* Enable TX intr */ - ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX); -} - -/* - * Interrupts enabled - */ -static void pnx8xxx_stop_rx(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - u32 ien; - - /* Disable RX intr */ - ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX); - - /* Clear all pending RX intr */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX); -} - -/* - * Set the modem control timer to fire immediately. - */ -static void pnx8xxx_enable_ms(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - - mod_timer(&sport->timer, jiffies); -} - -static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport) -{ - unsigned int status, ch, flg; - - status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | - ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); - while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) { - ch = serial_in(sport, PNX8XXX_FIFO) & 0xff; - - sport->port.icount.rx++; - - flg = TTY_NORMAL; - - /* - * note that the error handling code is - * out of the main execution path - */ - if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE | - PNX8XXX_UART_FIFO_RXPAR | - PNX8XXX_UART_FIFO_RXBRK) | - ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) { - if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) { - status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)); - sport->port.icount.brk++; - if (uart_handle_break(&sport->port)) - goto ignore_char; - } else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) - sport->port.icount.parity++; - else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) - sport->port.icount.frame++; - if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN)) - sport->port.icount.overrun++; - - status &= sport->port.read_status_mask; - - if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) - flg = TTY_PARITY; - else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) - flg = TTY_FRAME; - - sport->port.sysrq = 0; - } - - if (uart_handle_sysrq_char(&sport->port, ch)) - goto ignore_char; - - uart_insert_char(&sport->port, status, - ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg); - - ignore_char: - serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) | - PNX8XXX_UART_LCR_RX_NEXT); - status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | - ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); - } - - spin_unlock(&sport->port.lock); - tty_flip_buffer_push(&sport->port.state->port); - spin_lock(&sport->port.lock); -} - -static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport) -{ - struct circ_buf *xmit = &sport->port.state->xmit; - - if (sport->port.x_char) { - serial_out(sport, PNX8XXX_FIFO, sport->port.x_char); - sport->port.icount.tx++; - sport->port.x_char = 0; - return; - } - - /* - * Check the modem control lines before - * transmitting anything. - */ - pnx8xxx_mctrl_check(sport); - - if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - pnx8xxx_stop_tx(&sport->port); - return; - } - - /* - * TX while bytes available - */ - while (((serial_in(sport, PNX8XXX_FIFO) & - PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) { - serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - sport->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - - if (uart_circ_empty(xmit)) - pnx8xxx_stop_tx(&sport->port); -} - -static irqreturn_t pnx8xxx_int(int irq, void *dev_id) -{ - struct pnx8xxx_port *sport = dev_id; - unsigned int status; - - spin_lock(&sport->port.lock); - /* Get the interrupts */ - status = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN); - - /* Byte or break signal received */ - if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK)) - pnx8xxx_rx_chars(sport); - - /* TX holding register empty - transmit a byte */ - if (status & PNX8XXX_UART_INT_TX) - pnx8xxx_tx_chars(sport); - - /* Clear the ISTAT register */ - serial_out(sport, PNX8XXX_ICLR, status); - - spin_unlock(&sport->port.lock); - return IRQ_HANDLED; -} - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int pnx8xxx_tx_empty(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - - return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT; -} - -static unsigned int pnx8xxx_get_mctrl(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - unsigned int mctrl = TIOCM_DSR; - unsigned int msr; - - /* REVISIT */ - - msr = serial_in(sport, PNX8XXX_MCR); - - mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0; - mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0; - - return mctrl; -} - -static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -#if 0 /* FIXME */ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - unsigned int msr; -#endif -} - -/* - * Interrupts always disabled. - */ -static void pnx8xxx_break_ctl(struct uart_port *port, int break_state) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - unsigned long flags; - unsigned int lcr; - - spin_lock_irqsave(&sport->port.lock, flags); - lcr = serial_in(sport, PNX8XXX_LCR); - if (break_state == -1) - lcr |= PNX8XXX_UART_LCR_TXBREAK; - else - lcr &= ~PNX8XXX_UART_LCR_TXBREAK; - serial_out(sport, PNX8XXX_LCR, lcr); - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static int pnx8xxx_startup(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - int retval; - - /* - * Allocate the IRQ - */ - retval = request_irq(sport->port.irq, pnx8xxx_int, 0, - "pnx8xxx-uart", sport); - if (retval) - return retval; - - /* - * Finally, clear and enable interrupts - */ - - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | - PNX8XXX_UART_INT_ALLTX); - - serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) | - PNX8XXX_UART_INT_ALLRX | - PNX8XXX_UART_INT_ALLTX); - - /* - * Enable modem status interrupts - */ - spin_lock_irq(&sport->port.lock); - pnx8xxx_enable_ms(&sport->port); - spin_unlock_irq(&sport->port.lock); - - return 0; -} - -static void pnx8xxx_shutdown(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - int lcr; - - /* - * Stop our timer. - */ - del_timer_sync(&sport->timer); - - /* - * Disable all interrupts - */ - serial_out(sport, PNX8XXX_IEN, 0); - - /* - * Reset the Tx and Rx FIFOS, disable the break condition - */ - lcr = serial_in(sport, PNX8XXX_LCR); - lcr &= ~PNX8XXX_UART_LCR_TXBREAK; - lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST; - serial_out(sport, PNX8XXX_LCR, lcr); - - /* - * Clear all interrupts - */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | - PNX8XXX_UART_INT_ALLTX); - - /* - * Free the interrupt - */ - free_irq(sport->port.irq, sport); -} - -static void -pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - unsigned long flags; - unsigned int lcr_fcr, old_ien, baud, quot; - unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - - /* - * We only support CS7 and CS8. - */ - while ((termios->c_cflag & CSIZE) != CS7 && - (termios->c_cflag & CSIZE) != CS8) { - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= old_csize; - old_csize = CS8; - } - - if ((termios->c_cflag & CSIZE) == CS8) - lcr_fcr = PNX8XXX_UART_LCR_8BIT; - else - lcr_fcr = 0; - - if (termios->c_cflag & CSTOPB) - lcr_fcr |= PNX8XXX_UART_LCR_2STOPB; - if (termios->c_cflag & PARENB) { - lcr_fcr |= PNX8XXX_UART_LCR_PAREN; - if (!(termios->c_cflag & PARODD)) - lcr_fcr |= PNX8XXX_UART_LCR_PAREVN; - } - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - spin_lock_irqsave(&sport->port.lock, flags); - - sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) | - ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) | - ISTAT_TO_SM(PNX8XXX_UART_INT_RX); - if (termios->c_iflag & INPCK) - sport->port.read_status_mask |= - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); - if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) - sport->port.read_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); - - /* - * Characters to ignore - */ - sport->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); - if (termios->c_iflag & IGNBRK) { - sport->port.ignore_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN); - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - sport->port.ignore_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_RX); - - del_timer_sync(&sport->timer); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * disable interrupts and drain transmitter - */ - old_ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | - PNX8XXX_UART_INT_ALLRX)); - - while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA) - barrier(); - - /* then, disable everything */ - serial_out(sport, PNX8XXX_IEN, 0); - - /* Reset the Rx and Tx FIFOs too */ - lcr_fcr |= PNX8XXX_UART_LCR_TX_RST; - lcr_fcr |= PNX8XXX_UART_LCR_RX_RST; - - /* set the parity, stop bits and data size */ - serial_out(sport, PNX8XXX_LCR, lcr_fcr); - - /* set the baud rate */ - quot -= 1; - serial_out(sport, PNX8XXX_BAUD, quot); - - serial_out(sport, PNX8XXX_ICLR, -1); - - serial_out(sport, PNX8XXX_IEN, old_ien); - - if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) - pnx8xxx_enable_ms(&sport->port); - - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static const char *pnx8xxx_type(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - - return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void pnx8xxx_release_port(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - - release_mem_region(sport->port.mapbase, UART_PORT_SIZE); -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int pnx8xxx_request_port(struct uart_port *port) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, - "pnx8xxx-uart") != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void pnx8xxx_config_port(struct uart_port *port, int flags) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - - if (flags & UART_CONFIG_TYPE && - pnx8xxx_request_port(&sport->port) == 0) - sport->port.type = PORT_PNX8XXX; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_PNX8XXX and PORT_UNKNOWN - */ -static int -pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX) - ret = -EINVAL; - if (sport->port.irq != ser->irq) - ret = -EINVAL; - if (ser->io_type != SERIAL_IO_MEM) - ret = -EINVAL; - if (sport->port.uartclk / 16 != ser->baud_base) - ret = -EINVAL; - if ((void *)sport->port.mapbase != ser->iomem_base) - ret = -EINVAL; - if (sport->port.iobase != ser->port) - ret = -EINVAL; - if (ser->hub6 != 0) - ret = -EINVAL; - return ret; -} - -static const struct uart_ops pnx8xxx_pops = { - .tx_empty = pnx8xxx_tx_empty, - .set_mctrl = pnx8xxx_set_mctrl, - .get_mctrl = pnx8xxx_get_mctrl, - .stop_tx = pnx8xxx_stop_tx, - .start_tx = pnx8xxx_start_tx, - .stop_rx = pnx8xxx_stop_rx, - .enable_ms = pnx8xxx_enable_ms, - .break_ctl = pnx8xxx_break_ctl, - .startup = pnx8xxx_startup, - .shutdown = pnx8xxx_shutdown, - .set_termios = pnx8xxx_set_termios, - .type = pnx8xxx_type, - .release_port = pnx8xxx_release_port, - .request_port = pnx8xxx_request_port, - .config_port = pnx8xxx_config_port, - .verify_port = pnx8xxx_verify_port, -}; - - -/* - * Setup the PNX8XXX serial ports. - * - * Note also that we support "console=ttySx" where "x" is either 0 or 1. - */ -static void __init pnx8xxx_init_ports(void) -{ - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - for (i = 0; i < NR_PORTS; i++) { - timer_setup(&pnx8xxx_ports[i].timer, pnx8xxx_timeout, 0); - pnx8xxx_ports[i].port.ops = &pnx8xxx_pops; - } -} - -#ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE - -static void pnx8xxx_console_putchar(struct uart_port *port, int ch) -{ - struct pnx8xxx_port *sport = - container_of(port, struct pnx8xxx_port, port); - int status; - - do { - /* Wait for UART_TX register to empty */ - status = serial_in(sport, PNX8XXX_FIFO); - } while (status & PNX8XXX_UART_FIFO_TXFIFO); - serial_out(sport, PNX8XXX_FIFO, ch); -} - -/* - * Interrupts are disabled on entering - */static void -pnx8xxx_console_write(struct console *co, const char *s, unsigned int count) -{ - struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index]; - unsigned int old_ien, status; - - /* - * First, save IEN and then disable interrupts - */ - old_ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | - PNX8XXX_UART_INT_ALLRX)); - - uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore IEN - */ - do { - /* Wait for UART_TX register to empty */ - status = serial_in(sport, PNX8XXX_FIFO); - } while (status & PNX8XXX_UART_FIFO_TXFIFO); - - /* Clear TX and EMPTY interrupt */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX | - PNX8XXX_UART_INT_EMPTY); - - serial_out(sport, PNX8XXX_IEN, old_ien); -} - -static int __init -pnx8xxx_console_setup(struct console *co, char *options) -{ - struct pnx8xxx_port *sport; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index == -1 || co->index >= NR_PORTS) - co->index = 0; - sport = &pnx8xxx_ports[co->index]; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&sport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver pnx8xxx_reg; -static struct console pnx8xxx_console = { - .name = "ttyS", - .write = pnx8xxx_console_write, - .device = uart_console_device, - .setup = pnx8xxx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &pnx8xxx_reg, -}; - -static int __init pnx8xxx_rs_console_init(void) -{ - pnx8xxx_init_ports(); - register_console(&pnx8xxx_console); - return 0; -} -console_initcall(pnx8xxx_rs_console_init); - -#define PNX8XXX_CONSOLE &pnx8xxx_console -#else -#define PNX8XXX_CONSOLE NULL -#endif - -static struct uart_driver pnx8xxx_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyS", - .dev_name = "ttyS", - .major = SERIAL_PNX8XXX_MAJOR, - .minor = MINOR_START, - .nr = NR_PORTS, - .cons = PNX8XXX_CONSOLE, -}; - -static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - - return uart_suspend_port(&pnx8xxx_reg, &sport->port); -} - -static int pnx8xxx_serial_resume(struct platform_device *pdev) -{ - struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - - return uart_resume_port(&pnx8xxx_reg, &sport->port); -} - -static int pnx8xxx_serial_probe(struct platform_device *pdev) -{ - struct resource *res = pdev->resource; - int i; - - for (i = 0; i < pdev->num_resources; i++, res++) { - if (!(res->flags & IORESOURCE_MEM)) - continue; - - for (i = 0; i < NR_PORTS; i++) { - if (pnx8xxx_ports[i].port.mapbase != res->start) - continue; - - pnx8xxx_ports[i].port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PNX8XXX_CONSOLE); - pnx8xxx_ports[i].port.dev = &pdev->dev; - uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port); - platform_set_drvdata(pdev, &pnx8xxx_ports[i]); - break; - } - } - - return 0; -} - -static int pnx8xxx_serial_remove(struct platform_device *pdev) -{ - struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - - if (sport) - uart_remove_one_port(&pnx8xxx_reg, &sport->port); - - return 0; -} - -static struct platform_driver pnx8xxx_serial_driver = { - .driver = { - .name = "pnx8xxx-uart", - }, - .probe = pnx8xxx_serial_probe, - .remove = pnx8xxx_serial_remove, - .suspend = pnx8xxx_serial_suspend, - .resume = pnx8xxx_serial_resume, -}; - -static int __init pnx8xxx_serial_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: PNX8XXX driver\n"); - - pnx8xxx_init_ports(); - - ret = uart_register_driver(&pnx8xxx_reg); - if (ret == 0) { - ret = platform_driver_register(&pnx8xxx_serial_driver); - if (ret) - uart_unregister_driver(&pnx8xxx_reg); - } - return ret; -} - -static void __exit pnx8xxx_serial_exit(void) -{ - platform_driver_unregister(&pnx8xxx_serial_driver); - uart_unregister_driver(&pnx8xxx_reg); -} - -module_init(pnx8xxx_serial_init); -module_exit(pnx8xxx_serial_exit); - -MODULE_AUTHOR("Embedded Alley Solutions, Inc."); -MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR); -MODULE_ALIAS("platform:pnx8xxx-uart"); diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index bd13014a1c53..bbae072a125d 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -75,12 +75,17 @@ #define TEGRA_UART_FCR_IIR_FIFO_EN 0x40 /** - * tegra_uart_chip_data: SOC specific data. + * struct tegra_uart_chip_data: SOC specific data. * * @tx_fifo_full_status: Status flag available for checking tx fifo full. * @allow_txfifo_reset_fifo_mode: allow_tx fifo reset with fifo mode or not. * Tegra30 does not allow this. * @support_clk_src_div: Clock source support the clock divider. + * @fifo_mode_enable_status: Is FIFO mode enabled? + * @uart_max_port: Maximum number of UART ports + * @max_dma_burst_bytes: Maximum size of DMA bursts + * @error_tolerance_low_range: Lowest number in the error tolerance range + * @error_tolerance_high_range: Highest number in the error tolerance range */ struct tegra_uart_chip_data { bool tx_fifo_full_status; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index f41cba10b86b..828f9ad1be49 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1467,6 +1467,10 @@ static void uart_set_ldisc(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct uart_port *uport; + struct tty_port *port = &state->port; + + if (!tty_port_initialized(port)) + return; mutex_lock(&state->port.mutex); uport = uart_port_check(state); diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c index fb4781292d40..c41d8911ce95 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.c +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -207,7 +207,7 @@ struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx) continue; ret = gpiod_to_irq(gpios->gpio[i]); - if (ret <= 0) { + if (ret < 0) { dev_err(port->dev, "failed to find corresponding irq for %s (idx=%d, err=%d)\n", mctrl_gpios_desc[i].name, idx, ret); diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index 13eadcb8aec4..328d5a78792f 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -144,12 +144,13 @@ */ /** - * sifive_serial_port - driver-specific data extension to struct uart_port + * struct sifive_serial_port - driver-specific data extension to struct uart_port * @port: struct uart_port embedded in this struct * @dev: struct device * * @ier: shadowed copy of the interrupt enable register * @clkin_rate: input clock to the UART IP block. * @baud_rate: UART serial line rate (e.g., 115200 baud) + * @clk: reference to this device's clock * @clk_notifier: clock rate change notifier for upstream clock changes * * Configuration data specific to this SiFive UART. @@ -999,6 +1000,7 @@ static int sifive_serial_probe(struct platform_device *pdev) /* Set up clock divider */ ssp->clkin_rate = clk_get_rate(ssp->clk); ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE; + ssp->port.uartclk = ssp->baud_rate * 16; __ssp_update_div(ssp); platform_set_drvdata(pdev, ssp); diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index ee6c7762d355..f4de32d3f2af 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -350,7 +350,6 @@ static void stm32_transmit_chars_dma(struct uart_port *port) struct stm32_usart_offsets *ofs = &stm32port->info->ofs; struct circ_buf *xmit = &port->state->xmit; struct dma_async_tx_descriptor *desc = NULL; - dma_cookie_t cookie; unsigned int count, i; if (stm32port->tx_dma_busy) @@ -394,7 +393,7 @@ static void stm32_transmit_chars_dma(struct uart_port *port) desc->callback_param = port; /* Push current DMA TX transaction in the pending queue */ - cookie = dmaengine_submit(desc); + dmaengine_submit(desc); /* Issue pending DMA TX requests */ dma_async_issue_pending(stm32port->tx_ch); @@ -1087,7 +1086,6 @@ static int stm32_of_dma_rx_probe(struct stm32_port *stm32port, struct device *dev = &pdev->dev; struct dma_slave_config config; struct dma_async_tx_descriptor *desc = NULL; - dma_cookie_t cookie; int ret; /* Request DMA RX channel */ @@ -1132,7 +1130,7 @@ static int stm32_of_dma_rx_probe(struct stm32_port *stm32port, desc->callback_param = NULL; /* Push current DMA transaction in the pending queue */ - cookie = dmaengine_submit(desc); + dmaengine_submit(desc); /* Issue pending DMA requests */ dma_async_issue_pending(stm32port->rx_ch); diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 09379db613d8..f42ccc40ffa6 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -773,8 +773,8 @@ static int ulite_probe(struct platform_device *pdev) return -ENODEV; irq = platform_get_irq(pdev, 0); - if (irq <= 0) - return -ENXIO; + if (irq < 0) + return irq; pdata->clk = devm_clk_get(&pdev->dev, "s_axi_aclk"); if (IS_ERR(pdata->clk)) { diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index a9b1ee27183a..a14c5d996473 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -192,6 +192,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); * @baud: Current baud rate * @clk_rate_change_nb: Notifier block for clock changes * @quirks: Flags for RXBS support. + * @cts_override: Modem control state override */ struct cdns_uart { struct uart_port *port; diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c deleted file mode 100644 index c8324d58ef56..000000000000 --- a/drivers/tty/synclink.c +++ /dev/null @@ -1,7898 +0,0 @@ -// SPDX-License-Identifier: GPL-1.0+ -/* - * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $ - * - * Device driver for Microgate SyncLink ISA and PCI - * high speed multiprotocol serial adapters. - * - * written by Paul Fulghum for Microgate Corporation - * paulkf@microgate.com - * - * Microgate and SyncLink are trademarks of Microgate Corporation - * - * Derived from serial.c written by Theodore Ts'o and Linus Torvalds - * - * Original release 01/11/99 - * - * This driver is primarily intended for use in synchronous - * HDLC mode. Asynchronous mode is also provided. - * - * When operating in synchronous mode, each call to mgsl_write() - * contains exactly one complete HDLC frame. Calling mgsl_put_char - * will start assembling an HDLC frame that will not be sent until - * mgsl_flush_chars or mgsl_write is called. - * - * Synchronous receive data is reported as complete frames. To accomplish - * this, the TTY flip buffer is bypassed (too small to hold largest - * frame and may fragment frames) and the line discipline - * receive entry point is called directly. - * - * This driver has been tested with a slightly modified ppp.c driver - * for synchronous PPP. - * - * 2000/02/16 - * Added interface for syncppp.c driver (an alternate synchronous PPP - * implementation that also supports Cisco HDLC). Each device instance - * registers as a tty device AND a network device (if dosyncppp option - * is set for the device). The functionality is determined by which - * device interface is opened. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#if defined(__i386__) -# define BREAKPOINT() asm(" int $3"); -#else -# define BREAKPOINT() { } -#endif - -#define MAX_ISA_DEVICES 10 -#define MAX_PCI_DEVICES 10 -#define MAX_TOTAL_DEVICES 20 - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/seq_file.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/vmalloc.h> -#include <linux/init.h> -#include <linux/ioctl.h> -#include <linux/synclink.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/dma.h> -#include <linux/bitops.h> -#include <asm/types.h> -#include <linux/termios.h> -#include <linux/workqueue.h> -#include <linux/hdlc.h> -#include <linux/dma-mapping.h> - -#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE)) -#define SYNCLINK_GENERIC_HDLC 1 -#else -#define SYNCLINK_GENERIC_HDLC 0 -#endif - -#define GET_USER(error,value,addr) error = get_user(value,addr) -#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 -#define PUT_USER(error,value,addr) error = put_user(value,addr) -#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 - -#include <linux/uaccess.h> - -#define RCLRVALUE 0xffff - -static MGSL_PARAMS default_params = { - MGSL_MODE_HDLC, /* unsigned long mode */ - 0, /* unsigned char loopback; */ - HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ - HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ - 0, /* unsigned long clock_speed; */ - 0xff, /* unsigned char addr_filter; */ - HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ - HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ - HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ - 9600, /* unsigned long data_rate; */ - 8, /* unsigned char data_bits; */ - 1, /* unsigned char stop_bits; */ - ASYNC_PARITY_NONE /* unsigned char parity; */ -}; - -#define SHARED_MEM_ADDRESS_SIZE 0x40000 -#define BUFFERLISTSIZE 4096 -#define DMABUFFERSIZE 4096 -#define MAXRXFRAMES 7 - -typedef struct _DMABUFFERENTRY -{ - u32 phys_addr; /* 32-bit flat physical address of data buffer */ - volatile u16 count; /* buffer size/data count */ - volatile u16 status; /* Control/status field */ - volatile u16 rcc; /* character count field */ - u16 reserved; /* padding required by 16C32 */ - u32 link; /* 32-bit flat link to next buffer entry */ - char *virt_addr; /* virtual address of data buffer */ - u32 phys_entry; /* physical address of this buffer entry */ - dma_addr_t dma_addr; -} DMABUFFERENTRY, *DMAPBUFFERENTRY; - -/* The queue of BH actions to be performed */ - -#define BH_RECEIVE 1 -#define BH_TRANSMIT 2 -#define BH_STATUS 4 - -#define IO_PIN_SHUTDOWN_LIMIT 100 - -struct _input_signal_events { - int ri_up; - int ri_down; - int dsr_up; - int dsr_down; - int dcd_up; - int dcd_down; - int cts_up; - int cts_down; -}; - -/* transmit holding buffer definitions*/ -#define MAX_TX_HOLDING_BUFFERS 5 -struct tx_holding_buffer { - int buffer_size; - unsigned char * buffer; -}; - - -/* - * Device instance data structure - */ - -struct mgsl_struct { - int magic; - struct tty_port port; - int line; - int hw_version; - - struct mgsl_icount icount; - - int timeout; - int x_char; /* xon/xoff character */ - u16 read_status_mask; - u16 ignore_status_mask; - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; - - wait_queue_head_t status_event_wait_q; - wait_queue_head_t event_wait_q; - struct timer_list tx_timer; /* HDLC transmit timeout timer */ - struct mgsl_struct *next_device; /* device list link */ - - spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */ - struct work_struct task; /* task structure for scheduling bh */ - - u32 EventMask; /* event trigger mask */ - u32 RecordedEvents; /* pending events */ - - u32 max_frame_size; /* as set by device config */ - - u32 pending_bh; - - bool bh_running; /* Protection from multiple */ - int isr_overflow; - bool bh_requested; - - int dcd_chkcount; /* check counts to prevent */ - int cts_chkcount; /* too many IRQs if a signal */ - int dsr_chkcount; /* is floating */ - int ri_chkcount; - - char *buffer_list; /* virtual address of Rx & Tx buffer lists */ - u32 buffer_list_phys; - dma_addr_t buffer_list_dma_addr; - - unsigned int rx_buffer_count; /* count of total allocated Rx buffers */ - DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */ - unsigned int current_rx_buffer; - - int num_tx_dma_buffers; /* number of tx dma frames required */ - int tx_dma_buffers_used; - unsigned int tx_buffer_count; /* count of total allocated Tx buffers */ - DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */ - int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */ - int current_tx_buffer; /* next tx dma buffer to be loaded */ - - unsigned char *intermediate_rxbuffer; - - int num_tx_holding_buffers; /* number of tx holding buffer allocated */ - int get_tx_holding_index; /* next tx holding buffer for adapter to load */ - int put_tx_holding_index; /* next tx holding buffer to store user request */ - int tx_holding_count; /* number of tx holding buffers waiting */ - struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS]; - - bool rx_enabled; - bool rx_overflow; - bool rx_rcc_underrun; - - bool tx_enabled; - bool tx_active; - u32 idle_mode; - - u16 cmr_value; - u16 tcsr_value; - - char device_name[25]; /* device instance name */ - - unsigned char bus; /* expansion bus number (zero based) */ - unsigned char function; /* PCI device number */ - - unsigned int io_base; /* base I/O address of adapter */ - unsigned int io_addr_size; /* size of the I/O address range */ - bool io_addr_requested; /* true if I/O address requested */ - - unsigned int irq_level; /* interrupt level */ - unsigned long irq_flags; - bool irq_requested; /* true if IRQ requested */ - - unsigned int dma_level; /* DMA channel */ - bool dma_requested; /* true if dma channel requested */ - - u16 mbre_bit; - u16 loopback_bits; - u16 usc_idle_mode; - - MGSL_PARAMS params; /* communications parameters */ - - unsigned char serial_signals; /* current serial signal states */ - - bool irq_occurred; /* for diagnostics use */ - unsigned int init_error; /* Initialization startup error (DIAGS) */ - int fDiagnosticsmode; /* Driver in Diagnostic mode? (DIAGS) */ - - u32 last_mem_alloc; - unsigned char* memory_base; /* shared memory address (PCI only) */ - u32 phys_memory_base; - bool shared_mem_requested; - - unsigned char* lcr_base; /* local config registers (PCI only) */ - u32 phys_lcr_base; - u32 lcr_offset; - bool lcr_mem_requested; - - u32 misc_ctrl_value; - char *flag_buf; - bool drop_rts_on_tx_done; - - bool loopmode_insert_requested; - bool loopmode_send_done_requested; - - struct _input_signal_events input_signal_events; - - /* generic HDLC device parts */ - int netcount; - spinlock_t netlock; - -#if SYNCLINK_GENERIC_HDLC - struct net_device *netdev; -#endif -}; - -#define MGSL_MAGIC 0x5401 - -/* - * The size of the serial xmit buffer is 1 page, or 4096 bytes - */ -#ifndef SERIAL_XMIT_SIZE -#define SERIAL_XMIT_SIZE 4096 -#endif - -/* - * These macros define the offsets used in calculating the - * I/O address of the specified USC registers. - */ - - -#define DCPIN 2 /* Bit 1 of I/O address */ -#define SDPIN 4 /* Bit 2 of I/O address */ - -#define DCAR 0 /* DMA command/address register */ -#define CCAR SDPIN /* channel command/address register */ -#define DATAREG DCPIN + SDPIN /* serial data register */ -#define MSBONLY 0x41 -#define LSBONLY 0x40 - -/* - * These macros define the register address (ordinal number) - * used for writing address/value pairs to the USC. - */ - -#define CMR 0x02 /* Channel mode Register */ -#define CCSR 0x04 /* Channel Command/status Register */ -#define CCR 0x06 /* Channel Control Register */ -#define PSR 0x08 /* Port status Register */ -#define PCR 0x0a /* Port Control Register */ -#define TMDR 0x0c /* Test mode Data Register */ -#define TMCR 0x0e /* Test mode Control Register */ -#define CMCR 0x10 /* Clock mode Control Register */ -#define HCR 0x12 /* Hardware Configuration Register */ -#define IVR 0x14 /* Interrupt Vector Register */ -#define IOCR 0x16 /* Input/Output Control Register */ -#define ICR 0x18 /* Interrupt Control Register */ -#define DCCR 0x1a /* Daisy Chain Control Register */ -#define MISR 0x1c /* Misc Interrupt status Register */ -#define SICR 0x1e /* status Interrupt Control Register */ -#define RDR 0x20 /* Receive Data Register */ -#define RMR 0x22 /* Receive mode Register */ -#define RCSR 0x24 /* Receive Command/status Register */ -#define RICR 0x26 /* Receive Interrupt Control Register */ -#define RSR 0x28 /* Receive Sync Register */ -#define RCLR 0x2a /* Receive count Limit Register */ -#define RCCR 0x2c /* Receive Character count Register */ -#define TC0R 0x2e /* Time Constant 0 Register */ -#define TDR 0x30 /* Transmit Data Register */ -#define TMR 0x32 /* Transmit mode Register */ -#define TCSR 0x34 /* Transmit Command/status Register */ -#define TICR 0x36 /* Transmit Interrupt Control Register */ -#define TSR 0x38 /* Transmit Sync Register */ -#define TCLR 0x3a /* Transmit count Limit Register */ -#define TCCR 0x3c /* Transmit Character count Register */ -#define TC1R 0x3e /* Time Constant 1 Register */ - - -/* - * MACRO DEFINITIONS FOR DMA REGISTERS - */ - -#define DCR 0x06 /* DMA Control Register (shared) */ -#define DACR 0x08 /* DMA Array count Register (shared) */ -#define BDCR 0x12 /* Burst/Dwell Control Register (shared) */ -#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */ -#define DICR 0x18 /* DMA Interrupt Control Register (shared) */ -#define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */ -#define SDIR 0x1c /* Set DMA Interrupt Register (shared) */ - -#define TDMR 0x02 /* Transmit DMA mode Register */ -#define TDIAR 0x1e /* Transmit DMA Interrupt Arm Register */ -#define TBCR 0x2a /* Transmit Byte count Register */ -#define TARL 0x2c /* Transmit Address Register (low) */ -#define TARU 0x2e /* Transmit Address Register (high) */ -#define NTBCR 0x3a /* Next Transmit Byte count Register */ -#define NTARL 0x3c /* Next Transmit Address Register (low) */ -#define NTARU 0x3e /* Next Transmit Address Register (high) */ - -#define RDMR 0x82 /* Receive DMA mode Register (non-shared) */ -#define RDIAR 0x9e /* Receive DMA Interrupt Arm Register */ -#define RBCR 0xaa /* Receive Byte count Register */ -#define RARL 0xac /* Receive Address Register (low) */ -#define RARU 0xae /* Receive Address Register (high) */ -#define NRBCR 0xba /* Next Receive Byte count Register */ -#define NRARL 0xbc /* Next Receive Address Register (low) */ -#define NRARU 0xbe /* Next Receive Address Register (high) */ - - -/* - * MACRO DEFINITIONS FOR MODEM STATUS BITS - */ - -#define MODEMSTATUS_DTR 0x80 -#define MODEMSTATUS_DSR 0x40 -#define MODEMSTATUS_RTS 0x20 -#define MODEMSTATUS_CTS 0x10 -#define MODEMSTATUS_RI 0x04 -#define MODEMSTATUS_DCD 0x01 - - -/* - * Channel Command/Address Register (CCAR) Command Codes - */ - -#define RTCmd_Null 0x0000 -#define RTCmd_ResetHighestIus 0x1000 -#define RTCmd_TriggerChannelLoadDma 0x2000 -#define RTCmd_TriggerRxDma 0x2800 -#define RTCmd_TriggerTxDma 0x3000 -#define RTCmd_TriggerRxAndTxDma 0x3800 -#define RTCmd_PurgeRxFifo 0x4800 -#define RTCmd_PurgeTxFifo 0x5000 -#define RTCmd_PurgeRxAndTxFifo 0x5800 -#define RTCmd_LoadRcc 0x6800 -#define RTCmd_LoadTcc 0x7000 -#define RTCmd_LoadRccAndTcc 0x7800 -#define RTCmd_LoadTC0 0x8800 -#define RTCmd_LoadTC1 0x9000 -#define RTCmd_LoadTC0AndTC1 0x9800 -#define RTCmd_SerialDataLSBFirst 0xa000 -#define RTCmd_SerialDataMSBFirst 0xa800 -#define RTCmd_SelectBigEndian 0xb000 -#define RTCmd_SelectLittleEndian 0xb800 - - -/* - * DMA Command/Address Register (DCAR) Command Codes - */ - -#define DmaCmd_Null 0x0000 -#define DmaCmd_ResetTxChannel 0x1000 -#define DmaCmd_ResetRxChannel 0x1200 -#define DmaCmd_StartTxChannel 0x2000 -#define DmaCmd_StartRxChannel 0x2200 -#define DmaCmd_ContinueTxChannel 0x3000 -#define DmaCmd_ContinueRxChannel 0x3200 -#define DmaCmd_PauseTxChannel 0x4000 -#define DmaCmd_PauseRxChannel 0x4200 -#define DmaCmd_AbortTxChannel 0x5000 -#define DmaCmd_AbortRxChannel 0x5200 -#define DmaCmd_InitTxChannel 0x7000 -#define DmaCmd_InitRxChannel 0x7200 -#define DmaCmd_ResetHighestDmaIus 0x8000 -#define DmaCmd_ResetAllChannels 0x9000 -#define DmaCmd_StartAllChannels 0xa000 -#define DmaCmd_ContinueAllChannels 0xb000 -#define DmaCmd_PauseAllChannels 0xc000 -#define DmaCmd_AbortAllChannels 0xd000 -#define DmaCmd_InitAllChannels 0xf000 - -#define TCmd_Null 0x0000 -#define TCmd_ClearTxCRC 0x2000 -#define TCmd_SelectTicrTtsaData 0x4000 -#define TCmd_SelectTicrTxFifostatus 0x5000 -#define TCmd_SelectTicrIntLevel 0x6000 -#define TCmd_SelectTicrdma_level 0x7000 -#define TCmd_SendFrame 0x8000 -#define TCmd_SendAbort 0x9000 -#define TCmd_EnableDleInsertion 0xc000 -#define TCmd_DisableDleInsertion 0xd000 -#define TCmd_ClearEofEom 0xe000 -#define TCmd_SetEofEom 0xf000 - -#define RCmd_Null 0x0000 -#define RCmd_ClearRxCRC 0x2000 -#define RCmd_EnterHuntmode 0x3000 -#define RCmd_SelectRicrRtsaData 0x4000 -#define RCmd_SelectRicrRxFifostatus 0x5000 -#define RCmd_SelectRicrIntLevel 0x6000 -#define RCmd_SelectRicrdma_level 0x7000 - -/* - * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR) - */ - -#define RECEIVE_STATUS BIT5 -#define RECEIVE_DATA BIT4 -#define TRANSMIT_STATUS BIT3 -#define TRANSMIT_DATA BIT2 -#define IO_PIN BIT1 -#define MISC BIT0 - - -/* - * Receive status Bits in Receive Command/status Register RCSR - */ - -#define RXSTATUS_SHORT_FRAME BIT8 -#define RXSTATUS_CODE_VIOLATION BIT8 -#define RXSTATUS_EXITED_HUNT BIT7 -#define RXSTATUS_IDLE_RECEIVED BIT6 -#define RXSTATUS_BREAK_RECEIVED BIT5 -#define RXSTATUS_ABORT_RECEIVED BIT5 -#define RXSTATUS_RXBOUND BIT4 -#define RXSTATUS_CRC_ERROR BIT3 -#define RXSTATUS_FRAMING_ERROR BIT3 -#define RXSTATUS_ABORT BIT2 -#define RXSTATUS_PARITY_ERROR BIT2 -#define RXSTATUS_OVERRUN BIT1 -#define RXSTATUS_DATA_AVAILABLE BIT0 -#define RXSTATUS_ALL 0x01f6 -#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) ) - -/* - * Values for setting transmit idle mode in - * Transmit Control/status Register (TCSR) - */ -#define IDLEMODE_FLAGS 0x0000 -#define IDLEMODE_ALT_ONE_ZERO 0x0100 -#define IDLEMODE_ZERO 0x0200 -#define IDLEMODE_ONE 0x0300 -#define IDLEMODE_ALT_MARK_SPACE 0x0500 -#define IDLEMODE_SPACE 0x0600 -#define IDLEMODE_MARK 0x0700 -#define IDLEMODE_MASK 0x0700 - -/* - * IUSC revision identifiers - */ -#define IUSC_SL1660 0x4d44 -#define IUSC_PRE_SL1660 0x4553 - -/* - * Transmit status Bits in Transmit Command/status Register (TCSR) - */ - -#define TCSR_PRESERVE 0x0F00 - -#define TCSR_UNDERWAIT BIT11 -#define TXSTATUS_PREAMBLE_SENT BIT7 -#define TXSTATUS_IDLE_SENT BIT6 -#define TXSTATUS_ABORT_SENT BIT5 -#define TXSTATUS_EOF_SENT BIT4 -#define TXSTATUS_EOM_SENT BIT4 -#define TXSTATUS_CRC_SENT BIT3 -#define TXSTATUS_ALL_SENT BIT2 -#define TXSTATUS_UNDERRUN BIT1 -#define TXSTATUS_FIFO_EMPTY BIT0 -#define TXSTATUS_ALL 0x00fa -#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) ) - - -#define MISCSTATUS_RXC_LATCHED BIT15 -#define MISCSTATUS_RXC BIT14 -#define MISCSTATUS_TXC_LATCHED BIT13 -#define MISCSTATUS_TXC BIT12 -#define MISCSTATUS_RI_LATCHED BIT11 -#define MISCSTATUS_RI BIT10 -#define MISCSTATUS_DSR_LATCHED BIT9 -#define MISCSTATUS_DSR BIT8 -#define MISCSTATUS_DCD_LATCHED BIT7 -#define MISCSTATUS_DCD BIT6 -#define MISCSTATUS_CTS_LATCHED BIT5 -#define MISCSTATUS_CTS BIT4 -#define MISCSTATUS_RCC_UNDERRUN BIT3 -#define MISCSTATUS_DPLL_NO_SYNC BIT2 -#define MISCSTATUS_BRG1_ZERO BIT1 -#define MISCSTATUS_BRG0_ZERO BIT0 - -#define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0)) -#define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f)) - -#define SICR_RXC_ACTIVE BIT15 -#define SICR_RXC_INACTIVE BIT14 -#define SICR_RXC (BIT15|BIT14) -#define SICR_TXC_ACTIVE BIT13 -#define SICR_TXC_INACTIVE BIT12 -#define SICR_TXC (BIT13|BIT12) -#define SICR_RI_ACTIVE BIT11 -#define SICR_RI_INACTIVE BIT10 -#define SICR_RI (BIT11|BIT10) -#define SICR_DSR_ACTIVE BIT9 -#define SICR_DSR_INACTIVE BIT8 -#define SICR_DSR (BIT9|BIT8) -#define SICR_DCD_ACTIVE BIT7 -#define SICR_DCD_INACTIVE BIT6 -#define SICR_DCD (BIT7|BIT6) -#define SICR_CTS_ACTIVE BIT5 -#define SICR_CTS_INACTIVE BIT4 -#define SICR_CTS (BIT5|BIT4) -#define SICR_RCC_UNDERFLOW BIT3 -#define SICR_DPLL_NO_SYNC BIT2 -#define SICR_BRG1_ZERO BIT1 -#define SICR_BRG0_ZERO BIT0 - -void usc_DisableMasterIrqBit( struct mgsl_struct *info ); -void usc_EnableMasterIrqBit( struct mgsl_struct *info ); -void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask ); -void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask ); -void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask ); - -#define usc_EnableInterrupts( a, b ) \ - usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) ) - -#define usc_DisableInterrupts( a, b ) \ - usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) ) - -#define usc_EnableMasterIrqBit(a) \ - usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) ) - -#define usc_DisableMasterIrqBit(a) \ - usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) ) - -#define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) ) - -/* - * Transmit status Bits in Transmit Control status Register (TCSR) - * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) - */ - -#define TXSTATUS_PREAMBLE_SENT BIT7 -#define TXSTATUS_IDLE_SENT BIT6 -#define TXSTATUS_ABORT_SENT BIT5 -#define TXSTATUS_EOF BIT4 -#define TXSTATUS_CRC_SENT BIT3 -#define TXSTATUS_ALL_SENT BIT2 -#define TXSTATUS_UNDERRUN BIT1 -#define TXSTATUS_FIFO_EMPTY BIT0 - -#define DICR_MASTER BIT15 -#define DICR_TRANSMIT BIT0 -#define DICR_RECEIVE BIT1 - -#define usc_EnableDmaInterrupts(a,b) \ - usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) ) - -#define usc_DisableDmaInterrupts(a,b) \ - usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) ) - -#define usc_EnableStatusIrqs(a,b) \ - usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) ) - -#define usc_DisablestatusIrqs(a,b) \ - usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) ) - -/* Transmit status Bits in Transmit Control status Register (TCSR) */ -/* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */ - - -#define DISABLE_UNCONDITIONAL 0 -#define DISABLE_END_OF_FRAME 1 -#define ENABLE_UNCONDITIONAL 2 -#define ENABLE_AUTO_CTS 3 -#define ENABLE_AUTO_DCD 3 -#define usc_EnableTransmitter(a,b) \ - usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) ) -#define usc_EnableReceiver(a,b) \ - usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) ) - -static u16 usc_InDmaReg( struct mgsl_struct *info, u16 Port ); -static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value ); -static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd ); - -static u16 usc_InReg( struct mgsl_struct *info, u16 Port ); -static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value ); -static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd ); -void usc_RCmd( struct mgsl_struct *info, u16 Cmd ); -void usc_TCmd( struct mgsl_struct *info, u16 Cmd ); - -#define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b))) -#define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b)) - -#define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1)) - -static void usc_process_rxoverrun_sync( struct mgsl_struct *info ); -static void usc_start_receiver( struct mgsl_struct *info ); -static void usc_stop_receiver( struct mgsl_struct *info ); - -static void usc_start_transmitter( struct mgsl_struct *info ); -static void usc_stop_transmitter( struct mgsl_struct *info ); -static void usc_set_txidle( struct mgsl_struct *info ); -static void usc_load_txfifo( struct mgsl_struct *info ); - -static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate ); -static void usc_enable_loopback( struct mgsl_struct *info, int enable ); - -static void usc_get_serial_signals( struct mgsl_struct *info ); -static void usc_set_serial_signals( struct mgsl_struct *info ); - -static void usc_reset( struct mgsl_struct *info ); - -static void usc_set_sync_mode( struct mgsl_struct *info ); -static void usc_set_sdlc_mode( struct mgsl_struct *info ); -static void usc_set_async_mode( struct mgsl_struct *info ); -static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate ); - -static void usc_loopback_frame( struct mgsl_struct *info ); - -static void mgsl_tx_timeout(struct timer_list *t); - - -static void usc_loopmode_cancel_transmit( struct mgsl_struct * info ); -static void usc_loopmode_insert_request( struct mgsl_struct * info ); -static int usc_loopmode_active( struct mgsl_struct * info); -static void usc_loopmode_send_done( struct mgsl_struct * info ); - -static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg); - -#if SYNCLINK_GENERIC_HDLC -#define dev_to_port(D) (dev_to_hdlc(D)->priv) -static void hdlcdev_tx_done(struct mgsl_struct *info); -static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size); -static int hdlcdev_init(struct mgsl_struct *info); -static void hdlcdev_exit(struct mgsl_struct *info); -#endif - -/* - * Defines a BUS descriptor value for the PCI adapter - * local bus address ranges. - */ - -#define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \ -(0x00400020 + \ -((WrHold) << 30) + \ -((WrDly) << 28) + \ -((RdDly) << 26) + \ -((Nwdd) << 20) + \ -((Nwad) << 15) + \ -((Nxda) << 13) + \ -((Nrdd) << 11) + \ -((Nrad) << 6) ) - -static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit); - -/* - * Adapter diagnostic routines - */ -static bool mgsl_register_test( struct mgsl_struct *info ); -static bool mgsl_irq_test( struct mgsl_struct *info ); -static bool mgsl_dma_test( struct mgsl_struct *info ); -static bool mgsl_memory_test( struct mgsl_struct *info ); -static int mgsl_adapter_test( struct mgsl_struct *info ); - -/* - * device and resource management routines - */ -static int mgsl_claim_resources(struct mgsl_struct *info); -static void mgsl_release_resources(struct mgsl_struct *info); -static void mgsl_add_device(struct mgsl_struct *info); -static struct mgsl_struct* mgsl_allocate_device(void); - -/* - * DMA buffer manupulation functions. - */ -static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex ); -static bool mgsl_get_rx_frame( struct mgsl_struct *info ); -static bool mgsl_get_raw_rx_frame( struct mgsl_struct *info ); -static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info ); -static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info ); -static int num_free_tx_dma_buffers(struct mgsl_struct *info); -static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize); -static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count); - -/* - * DMA and Shared Memory buffer allocation and formatting - */ -static int mgsl_allocate_dma_buffers(struct mgsl_struct *info); -static void mgsl_free_dma_buffers(struct mgsl_struct *info); -static int mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount); -static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount); -static int mgsl_alloc_buffer_list_memory(struct mgsl_struct *info); -static void mgsl_free_buffer_list_memory(struct mgsl_struct *info); -static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info); -static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info); -static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info); -static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info); -static bool load_next_tx_holding_buffer(struct mgsl_struct *info); -static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize); - -/* - * Bottom half interrupt handlers - */ -static void mgsl_bh_handler(struct work_struct *work); -static void mgsl_bh_receive(struct mgsl_struct *info); -static void mgsl_bh_transmit(struct mgsl_struct *info); -static void mgsl_bh_status(struct mgsl_struct *info); - -/* - * Interrupt handler routines and dispatch table. - */ -static void mgsl_isr_null( struct mgsl_struct *info ); -static void mgsl_isr_transmit_data( struct mgsl_struct *info ); -static void mgsl_isr_receive_data( struct mgsl_struct *info ); -static void mgsl_isr_receive_status( struct mgsl_struct *info ); -static void mgsl_isr_transmit_status( struct mgsl_struct *info ); -static void mgsl_isr_io_pin( struct mgsl_struct *info ); -static void mgsl_isr_misc( struct mgsl_struct *info ); -static void mgsl_isr_receive_dma( struct mgsl_struct *info ); -static void mgsl_isr_transmit_dma( struct mgsl_struct *info ); - -typedef void (*isr_dispatch_func)(struct mgsl_struct *); - -static isr_dispatch_func UscIsrTable[7] = -{ - mgsl_isr_null, - mgsl_isr_misc, - mgsl_isr_io_pin, - mgsl_isr_transmit_data, - mgsl_isr_transmit_status, - mgsl_isr_receive_data, - mgsl_isr_receive_status -}; - -/* - * ioctl call handlers - */ -static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount - __user *user_icount); -static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params); -static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params); -static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode); -static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode); -static int mgsl_txenable(struct mgsl_struct * info, int enable); -static int mgsl_txabort(struct mgsl_struct * info); -static int mgsl_rxenable(struct mgsl_struct * info, int enable); -static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask); -static int mgsl_loopmode_send_done( struct mgsl_struct * info ); - -/* set non-zero on successful registration with PCI subsystem */ -static bool pci_registered; - -/* - * Global linked list of SyncLink devices - */ -static struct mgsl_struct *mgsl_device_list; -static int mgsl_device_count; - -/* - * Set this param to non-zero to load eax with the - * .text section address and breakpoint on module load. - * This is useful for use with gdb and add-symbol-file command. - */ -static bool break_on_load; - -/* - * Driver major number, defaults to zero to get auto - * assigned major number. May be forced as module parameter. - */ -static int ttymajor; - -/* - * Array of user specified options for ISA adapters. - */ -static int io[MAX_ISA_DEVICES]; -static int irq[MAX_ISA_DEVICES]; -static int dma[MAX_ISA_DEVICES]; -static int debug_level; -static int maxframe[MAX_TOTAL_DEVICES]; -static int txdmabufs[MAX_TOTAL_DEVICES]; -static int txholdbufs[MAX_TOTAL_DEVICES]; - -module_param(break_on_load, bool, 0); -module_param(ttymajor, int, 0); -module_param_hw_array(io, int, ioport, NULL, 0); -module_param_hw_array(irq, int, irq, NULL, 0); -module_param_hw_array(dma, int, dma, NULL, 0); -module_param(debug_level, int, 0); -module_param_array(maxframe, int, NULL, 0); -module_param_array(txdmabufs, int, NULL, 0); -module_param_array(txholdbufs, int, NULL, 0); - -static char *driver_name = "SyncLink serial driver"; -static char *driver_version = "$Revision: 4.38 $"; - -static int synclink_init_one (struct pci_dev *dev, - const struct pci_device_id *ent); -static void synclink_remove_one (struct pci_dev *dev); - -static const struct pci_device_id synclink_pci_tbl[] = { - { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, }, - { 0, }, /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, synclink_pci_tbl); - -MODULE_LICENSE("GPL"); - -static struct pci_driver synclink_pci_driver = { - .name = "synclink", - .id_table = synclink_pci_tbl, - .probe = synclink_init_one, - .remove = synclink_remove_one, -}; - -static struct tty_driver *serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - - -static void mgsl_change_params(struct mgsl_struct *info); -static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout); - -/* - * 1st function defined in .text section. Calling this function in - * init_module() followed by a breakpoint allows a remote debugger - * (gdb) to get the .text address for the add-symbol-file command. - * This allows remote debugging of dynamically loadable modules. - */ -static void* mgsl_get_text_ptr(void) -{ - return mgsl_get_text_ptr; -} - -static inline int mgsl_paranoia_check(struct mgsl_struct *info, - char *name, const char *routine) -{ -#ifdef MGSL_PARANOIA_CHECK - static const char *badmagic = - "Warning: bad magic number for mgsl struct (%s) in %s\n"; - static const char *badinfo = - "Warning: null mgsl_struct for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != MGSL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#else - if (!info) - return 1; -#endif - return 0; -} - -/* - * line discipline callback wrappers - * - * The wrappers maintain line discipline references - * while calling into the line discipline. - * - * ldisc_receive_buf - pass receive data to line discipline - */ - -static void ldisc_receive_buf(struct tty_struct *tty, - const __u8 *data, char *flags, int count) -{ - struct tty_ldisc *ld; - if (!tty) - return; - ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->ops->receive_buf) - ld->ops->receive_buf(tty, data, flags, count); - tty_ldisc_deref(ld); - } -} - -/* mgsl_stop() throttle (stop) transmitter - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static void mgsl_stop(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (mgsl_paranoia_check(info, tty->name, "mgsl_stop")) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("mgsl_stop(%s)\n",info->device_name); - - spin_lock_irqsave(&info->irq_spinlock,flags); - if (info->tx_enabled) - usc_stop_transmitter(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - -} /* end of mgsl_stop() */ - -/* mgsl_start() release (start) transmitter - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static void mgsl_start(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (mgsl_paranoia_check(info, tty->name, "mgsl_start")) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("mgsl_start(%s)\n",info->device_name); - - spin_lock_irqsave(&info->irq_spinlock,flags); - if (!info->tx_enabled) - usc_start_transmitter(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - -} /* end of mgsl_start() */ - -/* - * Bottom half work queue access functions - */ - -/* mgsl_bh_action() Return next bottom half action to perform. - * Return Value: BH action code or 0 if nothing to do. - */ -static int mgsl_bh_action(struct mgsl_struct *info) -{ - unsigned long flags; - int rc = 0; - - spin_lock_irqsave(&info->irq_spinlock,flags); - - if (info->pending_bh & BH_RECEIVE) { - info->pending_bh &= ~BH_RECEIVE; - rc = BH_RECEIVE; - } else if (info->pending_bh & BH_TRANSMIT) { - info->pending_bh &= ~BH_TRANSMIT; - rc = BH_TRANSMIT; - } else if (info->pending_bh & BH_STATUS) { - info->pending_bh &= ~BH_STATUS; - rc = BH_STATUS; - } - - if (!rc) { - /* Mark BH routine as complete */ - info->bh_running = false; - info->bh_requested = false; - } - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - return rc; -} - -/* - * Perform bottom half processing of work items queued by ISR. - */ -static void mgsl_bh_handler(struct work_struct *work) -{ - struct mgsl_struct *info = - container_of(work, struct mgsl_struct, task); - int action; - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):mgsl_bh_handler(%s) entry\n", - __FILE__,__LINE__,info->device_name); - - info->bh_running = true; - - while((action = mgsl_bh_action(info)) != 0) { - - /* Process work item */ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):mgsl_bh_handler() work item action=%d\n", - __FILE__,__LINE__,action); - - switch (action) { - - case BH_RECEIVE: - mgsl_bh_receive(info); - break; - case BH_TRANSMIT: - mgsl_bh_transmit(info); - break; - case BH_STATUS: - mgsl_bh_status(info); - break; - default: - /* unknown work item ID */ - printk("Unknown work item ID=%08X!\n", action); - break; - } - } - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):mgsl_bh_handler(%s) exit\n", - __FILE__,__LINE__,info->device_name); -} - -static void mgsl_bh_receive(struct mgsl_struct *info) -{ - bool (*get_rx_frame)(struct mgsl_struct *info) = - (info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame); - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):mgsl_bh_receive(%s)\n", - __FILE__,__LINE__,info->device_name); - - do - { - if (info->rx_rcc_underrun) { - unsigned long flags; - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_start_receiver(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - return; - } - } while(get_rx_frame(info)); -} - -static void mgsl_bh_transmit(struct mgsl_struct *info) -{ - struct tty_struct *tty = info->port.tty; - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):mgsl_bh_transmit() entry on %s\n", - __FILE__,__LINE__,info->device_name); - - if (tty) - tty_wakeup(tty); - - /* if transmitter idle and loopmode_send_done_requested - * then start echoing RxD to TxD - */ - spin_lock_irqsave(&info->irq_spinlock,flags); - if ( !info->tx_active && info->loopmode_send_done_requested ) - usc_loopmode_send_done( info ); - spin_unlock_irqrestore(&info->irq_spinlock,flags); -} - -static void mgsl_bh_status(struct mgsl_struct *info) -{ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):mgsl_bh_status() entry on %s\n", - __FILE__,__LINE__,info->device_name); - - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - info->dcd_chkcount = 0; - info->cts_chkcount = 0; -} - -/* mgsl_isr_receive_status() - * - * Service a receive status interrupt. The type of status - * interrupt is indicated by the state of the RCSR. - * This is only used for HDLC mode. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_receive_status( struct mgsl_struct *info ) -{ - u16 status = usc_InReg( info, RCSR ); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_receive_status status=%04X\n", - __FILE__,__LINE__,status); - - if ( (status & RXSTATUS_ABORT_RECEIVED) && - info->loopmode_insert_requested && - usc_loopmode_active(info) ) - { - ++info->icount.rxabort; - info->loopmode_insert_requested = false; - - /* clear CMR:13 to start echoing RxD to TxD */ - info->cmr_value &= ~BIT13; - usc_OutReg(info, CMR, info->cmr_value); - - /* disable received abort irq (no longer required) */ - usc_OutReg(info, RICR, - (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED)); - } - - if (status & (RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED)) { - if (status & RXSTATUS_EXITED_HUNT) - info->icount.exithunt++; - if (status & RXSTATUS_IDLE_RECEIVED) - info->icount.rxidle++; - wake_up_interruptible(&info->event_wait_q); - } - - if (status & RXSTATUS_OVERRUN){ - info->icount.rxover++; - usc_process_rxoverrun_sync( info ); - } - - usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); - usc_UnlatchRxstatusBits( info, status ); - -} /* end of mgsl_isr_receive_status() */ - -/* mgsl_isr_transmit_status() - * - * Service a transmit status interrupt - * HDLC mode :end of transmit frame - * Async mode:all data is sent - * transmit status is indicated by bits in the TCSR. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_transmit_status( struct mgsl_struct *info ) -{ - u16 status = usc_InReg( info, TCSR ); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_transmit_status status=%04X\n", - __FILE__,__LINE__,status); - - usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); - usc_UnlatchTxstatusBits( info, status ); - - if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) ) - { - /* finished sending HDLC abort. This may leave */ - /* the TxFifo with data from the aborted frame */ - /* so purge the TxFifo. Also shutdown the DMA */ - /* channel in case there is data remaining in */ - /* the DMA buffer */ - usc_DmaCmd( info, DmaCmd_ResetTxChannel ); - usc_RTCmd( info, RTCmd_PurgeTxFifo ); - } - - if ( status & TXSTATUS_EOF_SENT ) - info->icount.txok++; - else if ( status & TXSTATUS_UNDERRUN ) - info->icount.txunder++; - else if ( status & TXSTATUS_ABORT_SENT ) - info->icount.txabort++; - else - info->icount.txunder++; - - info->tx_active = false; - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - del_timer(&info->tx_timer); - - if ( info->drop_rts_on_tx_done ) { - usc_get_serial_signals( info ); - if ( info->serial_signals & SerialSignal_RTS ) { - info->serial_signals &= ~SerialSignal_RTS; - usc_set_serial_signals( info ); - } - info->drop_rts_on_tx_done = false; - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - { - if (info->port.tty->stopped || info->port.tty->hw_stopped) { - usc_stop_transmitter(info); - return; - } - info->pending_bh |= BH_TRANSMIT; - } - -} /* end of mgsl_isr_transmit_status() */ - -/* mgsl_isr_io_pin() - * - * Service an Input/Output pin interrupt. The type of - * interrupt is indicated by bits in the MISR - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_io_pin( struct mgsl_struct *info ) -{ - struct mgsl_icount *icount; - u16 status = usc_InReg( info, MISR ); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_io_pin status=%04X\n", - __FILE__,__LINE__,status); - - usc_ClearIrqPendingBits( info, IO_PIN ); - usc_UnlatchIostatusBits( info, status ); - - if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED | - MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) { - icount = &info->icount; - /* update input line counters */ - if (status & MISCSTATUS_RI_LATCHED) { - if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) - usc_DisablestatusIrqs(info,SICR_RI); - icount->rng++; - if ( status & MISCSTATUS_RI ) - info->input_signal_events.ri_up++; - else - info->input_signal_events.ri_down++; - } - if (status & MISCSTATUS_DSR_LATCHED) { - if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) - usc_DisablestatusIrqs(info,SICR_DSR); - icount->dsr++; - if ( status & MISCSTATUS_DSR ) - info->input_signal_events.dsr_up++; - else - info->input_signal_events.dsr_down++; - } - if (status & MISCSTATUS_DCD_LATCHED) { - if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) - usc_DisablestatusIrqs(info,SICR_DCD); - icount->dcd++; - if (status & MISCSTATUS_DCD) { - info->input_signal_events.dcd_up++; - } else - info->input_signal_events.dcd_down++; -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) { - if (status & MISCSTATUS_DCD) - netif_carrier_on(info->netdev); - else - netif_carrier_off(info->netdev); - } -#endif - } - if (status & MISCSTATUS_CTS_LATCHED) - { - if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) - usc_DisablestatusIrqs(info,SICR_CTS); - icount->cts++; - if ( status & MISCSTATUS_CTS ) - info->input_signal_events.cts_up++; - else - info->input_signal_events.cts_down++; - } - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - if (tty_port_check_carrier(&info->port) && - (status & MISCSTATUS_DCD_LATCHED) ) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s CD now %s...", info->device_name, - (status & MISCSTATUS_DCD) ? "on" : "off"); - if (status & MISCSTATUS_DCD) - wake_up_interruptible(&info->port.open_wait); - else { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("doing serial hangup..."); - if (info->port.tty) - tty_hangup(info->port.tty); - } - } - - if (tty_port_cts_enabled(&info->port) && - (status & MISCSTATUS_CTS_LATCHED) ) { - if (info->port.tty->hw_stopped) { - if (status & MISCSTATUS_CTS) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("CTS tx start..."); - info->port.tty->hw_stopped = 0; - usc_start_transmitter(info); - info->pending_bh |= BH_TRANSMIT; - return; - } - } else { - if (!(status & MISCSTATUS_CTS)) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("CTS tx stop..."); - if (info->port.tty) - info->port.tty->hw_stopped = 1; - usc_stop_transmitter(info); - } - } - } - } - - info->pending_bh |= BH_STATUS; - - /* for diagnostics set IRQ flag */ - if ( status & MISCSTATUS_TXC_LATCHED ){ - usc_OutReg( info, SICR, - (unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) ); - usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED ); - info->irq_occurred = true; - } - -} /* end of mgsl_isr_io_pin() */ - -/* mgsl_isr_transmit_data() - * - * Service a transmit data interrupt (async mode only). - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_transmit_data( struct mgsl_struct *info ) -{ - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n", - __FILE__,__LINE__,info->xmit_cnt); - - usc_ClearIrqPendingBits( info, TRANSMIT_DATA ); - - if (info->port.tty->stopped || info->port.tty->hw_stopped) { - usc_stop_transmitter(info); - return; - } - - if ( info->xmit_cnt ) - usc_load_txfifo( info ); - else - info->tx_active = false; - - if (info->xmit_cnt < WAKEUP_CHARS) - info->pending_bh |= BH_TRANSMIT; - -} /* end of mgsl_isr_transmit_data() */ - -/* mgsl_isr_receive_data() - * - * Service a receive data interrupt. This occurs - * when operating in asynchronous interrupt transfer mode. - * The receive data FIFO is flushed to the receive data buffers. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_receive_data( struct mgsl_struct *info ) -{ - int Fifocount; - u16 status; - int work = 0; - unsigned char DataByte; - struct mgsl_icount *icount = &info->icount; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_receive_data\n", - __FILE__,__LINE__); - - usc_ClearIrqPendingBits( info, RECEIVE_DATA ); - - /* select FIFO status for RICR readback */ - usc_RCmd( info, RCmd_SelectRicrRxFifostatus ); - - /* clear the Wordstatus bit so that status readback */ - /* only reflects the status of this byte */ - usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 )); - - /* flush the receive FIFO */ - - while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) { - int flag; - - /* read one byte from RxFIFO */ - outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY), - info->io_base + CCAR ); - DataByte = inb( info->io_base + CCAR ); - - /* get the status of the received byte */ - status = usc_InReg(info, RCSR); - if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR | - RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) ) - usc_UnlatchRxstatusBits(info,RXSTATUS_ALL); - - icount->rx++; - - flag = 0; - if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR | - RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) ) { - printk("rxerr=%04X\n",status); - /* update error statistics */ - if ( status & RXSTATUS_BREAK_RECEIVED ) { - status &= ~(RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR); - icount->brk++; - } else if (status & RXSTATUS_PARITY_ERROR) - icount->parity++; - else if (status & RXSTATUS_FRAMING_ERROR) - icount->frame++; - else if (status & RXSTATUS_OVERRUN) { - /* must issue purge fifo cmd before */ - /* 16C32 accepts more receive chars */ - usc_RTCmd(info,RTCmd_PurgeRxFifo); - icount->overrun++; - } - - /* discard char if tty control flags say so */ - if (status & info->ignore_status_mask) - continue; - - status &= info->read_status_mask; - - if (status & RXSTATUS_BREAK_RECEIVED) { - flag = TTY_BREAK; - if (info->port.flags & ASYNC_SAK) - do_SAK(info->port.tty); - } else if (status & RXSTATUS_PARITY_ERROR) - flag = TTY_PARITY; - else if (status & RXSTATUS_FRAMING_ERROR) - flag = TTY_FRAME; - } /* end of if (error) */ - tty_insert_flip_char(&info->port, DataByte, flag); - if (status & RXSTATUS_OVERRUN) { - /* Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - work += tty_insert_flip_char(&info->port, 0, TTY_OVERRUN); - } - } - - if ( debug_level >= DEBUG_LEVEL_ISR ) { - printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n", - __FILE__,__LINE__,icount->rx,icount->brk, - icount->parity,icount->frame,icount->overrun); - } - - if(work) - tty_flip_buffer_push(&info->port); -} - -/* mgsl_isr_misc() - * - * Service a miscellaneous interrupt source. - * - * Arguments: info pointer to device extension (instance data) - * Return Value: None - */ -static void mgsl_isr_misc( struct mgsl_struct *info ) -{ - u16 status = usc_InReg( info, MISR ); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_misc status=%04X\n", - __FILE__,__LINE__,status); - - if ((status & MISCSTATUS_RCC_UNDERRUN) && - (info->params.mode == MGSL_MODE_HDLC)) { - - /* turn off receiver and rx DMA */ - usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); - usc_DmaCmd(info, DmaCmd_ResetRxChannel); - usc_UnlatchRxstatusBits(info, RXSTATUS_ALL); - usc_ClearIrqPendingBits(info, RECEIVE_DATA | RECEIVE_STATUS); - usc_DisableInterrupts(info, RECEIVE_DATA | RECEIVE_STATUS); - - /* schedule BH handler to restart receiver */ - info->pending_bh |= BH_RECEIVE; - info->rx_rcc_underrun = true; - } - - usc_ClearIrqPendingBits( info, MISC ); - usc_UnlatchMiscstatusBits( info, status ); - -} /* end of mgsl_isr_misc() */ - -/* mgsl_isr_null() - * - * Services undefined interrupt vectors from the - * USC. (hence this function SHOULD never be called) - * - * Arguments: info pointer to device extension (instance data) - * Return Value: None - */ -static void mgsl_isr_null( struct mgsl_struct *info ) -{ - -} /* end of mgsl_isr_null() */ - -/* mgsl_isr_receive_dma() - * - * Service a receive DMA channel interrupt. - * For this driver there are two sources of receive DMA interrupts - * as identified in the Receive DMA mode Register (RDMR): - * - * BIT3 EOA/EOL End of List, all receive buffers in receive - * buffer list have been filled (no more free buffers - * available). The DMA controller has shut down. - * - * BIT2 EOB End of Buffer. This interrupt occurs when a receive - * DMA buffer is terminated in response to completion - * of a good frame or a frame with errors. The status - * of the frame is stored in the buffer entry in the - * list of receive buffer entries. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_receive_dma( struct mgsl_struct *info ) -{ - u16 status; - - /* clear interrupt pending and IUS bit for Rx DMA IRQ */ - usc_OutDmaReg( info, CDIR, BIT9 | BIT1 ); - - /* Read the receive DMA status to identify interrupt type. */ - /* This also clears the status bits. */ - status = usc_InDmaReg( info, RDMR ); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n", - __FILE__,__LINE__,info->device_name,status); - - info->pending_bh |= BH_RECEIVE; - - if ( status & BIT3 ) { - info->rx_overflow = true; - info->icount.buf_overrun++; - } - -} /* end of mgsl_isr_receive_dma() */ - -/* mgsl_isr_transmit_dma() - * - * This function services a transmit DMA channel interrupt. - * - * For this driver there is one source of transmit DMA interrupts - * as identified in the Transmit DMA Mode Register (TDMR): - * - * BIT2 EOB End of Buffer. This interrupt occurs when a - * transmit DMA buffer has been emptied. - * - * The driver maintains enough transmit DMA buffers to hold at least - * one max frame size transmit frame. When operating in a buffered - * transmit mode, there may be enough transmit DMA buffers to hold at - * least two or more max frame size frames. On an EOB condition, - * determine if there are any queued transmit buffers and copy into - * transmit DMA buffers if we have room. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_isr_transmit_dma( struct mgsl_struct *info ) -{ - u16 status; - - /* clear interrupt pending and IUS bit for Tx DMA IRQ */ - usc_OutDmaReg(info, CDIR, BIT8 | BIT0 ); - - /* Read the transmit DMA status to identify interrupt type. */ - /* This also clears the status bits. */ - - status = usc_InDmaReg( info, TDMR ); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n", - __FILE__,__LINE__,info->device_name,status); - - if ( status & BIT2 ) { - --info->tx_dma_buffers_used; - - /* if there are transmit frames queued, - * try to load the next one - */ - if ( load_next_tx_holding_buffer(info) ) { - /* if call returns non-zero value, we have - * at least one free tx holding buffer - */ - info->pending_bh |= BH_TRANSMIT; - } - } - -} /* end of mgsl_isr_transmit_dma() */ - -/* mgsl_interrupt() - * - * Interrupt service routine entry point. - * - * Arguments: - * - * irq interrupt number that caused interrupt - * dev_id device ID supplied during interrupt registration - * - * Return Value: None - */ -static irqreturn_t mgsl_interrupt(int dummy, void *dev_id) -{ - struct mgsl_struct *info = dev_id; - u16 UscVector; - u16 DmaVector; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n", - __FILE__, __LINE__, info->irq_level); - - spin_lock(&info->irq_spinlock); - - for(;;) { - /* Read the interrupt vectors from hardware. */ - UscVector = usc_InReg(info, IVR) >> 9; - DmaVector = usc_InDmaReg(info, DIVR); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n", - __FILE__,__LINE__,info->device_name,UscVector,DmaVector); - - if ( !UscVector && !DmaVector ) - break; - - /* Dispatch interrupt vector */ - if ( UscVector ) - (*UscIsrTable[UscVector])(info); - else if ( (DmaVector&(BIT10|BIT9)) == BIT10) - mgsl_isr_transmit_dma(info); - else - mgsl_isr_receive_dma(info); - - if ( info->isr_overflow ) { - printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n", - __FILE__, __LINE__, info->device_name, info->irq_level); - usc_DisableMasterIrqBit(info); - usc_DisableDmaInterrupts(info,DICR_MASTER); - break; - } - } - - /* Request bottom half processing if there's something - * for it to do and the bh is not already running - */ - - if ( info->pending_bh && !info->bh_running && !info->bh_requested ) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s queueing bh task.\n", - __FILE__,__LINE__,info->device_name); - schedule_work(&info->task); - info->bh_requested = true; - } - - spin_unlock(&info->irq_spinlock); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n", - __FILE__, __LINE__, info->irq_level); - - return IRQ_HANDLED; -} /* end of mgsl_interrupt() */ - -/* startup() - * - * Initialize and start device. - * - * Arguments: info pointer to device instance data - * Return Value: 0 if success, otherwise error code - */ -static int startup(struct mgsl_struct * info) -{ - int retval = 0; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name); - - if (tty_port_initialized(&info->port)) - return 0; - - if (!info->xmit_buf) { - /* allocate a page of memory for a transmit buffer */ - info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); - if (!info->xmit_buf) { - printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", - __FILE__,__LINE__,info->device_name); - return -ENOMEM; - } - } - - info->pending_bh = 0; - - memset(&info->icount, 0, sizeof(info->icount)); - - timer_setup(&info->tx_timer, mgsl_tx_timeout, 0); - - /* Allocate and claim adapter resources */ - retval = mgsl_claim_resources(info); - - /* perform existence check and diagnostics */ - if ( !retval ) - retval = mgsl_adapter_test(info); - - if ( retval ) { - if (capable(CAP_SYS_ADMIN) && info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - mgsl_release_resources(info); - return retval; - } - - /* program hardware for current parameters */ - mgsl_change_params(info); - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - tty_port_set_initialized(&info->port, 1); - - return 0; -} /* end of startup() */ - -/* shutdown() - * - * Called by mgsl_close() and mgsl_hangup() to shutdown hardware - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void shutdown(struct mgsl_struct * info) -{ - unsigned long flags; - - if (!tty_port_initialized(&info->port)) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_shutdown(%s)\n", - __FILE__,__LINE__, info->device_name ); - - /* clear status wait queue because status changes */ - /* can't happen after shutting down the hardware */ - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - del_timer_sync(&info->tx_timer); - - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; - } - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_DisableMasterIrqBit(info); - usc_stop_receiver(info); - usc_stop_transmitter(info); - usc_DisableInterrupts(info,RECEIVE_DATA | RECEIVE_STATUS | - TRANSMIT_DATA | TRANSMIT_STATUS | IO_PIN | MISC ); - usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE); - - /* Disable DMAEN (Port 7, Bit 14) */ - /* This disconnects the DMA request signal from the ISA bus */ - /* on the ISA adapter. This has no effect for the PCI adapter */ - usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14)); - - /* Disable INTEN (Port 6, Bit12) */ - /* This disconnects the IRQ request signal to the ISA bus */ - /* on the ISA adapter. This has no effect for the PCI adapter */ - usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12)); - - if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - usc_set_serial_signals(info); - } - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - mgsl_release_resources(info); - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - tty_port_set_initialized(&info->port, 0); -} /* end of shutdown() */ - -static void mgsl_program_hw(struct mgsl_struct *info) -{ - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - - usc_stop_receiver(info); - usc_stop_transmitter(info); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - if (info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW || - info->netcount) - usc_set_sync_mode(info); - else - usc_set_async_mode(info); - - usc_set_serial_signals(info); - - info->dcd_chkcount = 0; - info->cts_chkcount = 0; - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - - usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI); - usc_EnableInterrupts(info, IO_PIN); - usc_get_serial_signals(info); - - if (info->netcount || info->port.tty->termios.c_cflag & CREAD) - usc_start_receiver(info); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); -} - -/* Reconfigure adapter based on new parameters - */ -static void mgsl_change_params(struct mgsl_struct *info) -{ - unsigned cflag; - int bits_per_char; - - if (!info->port.tty) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_change_params(%s)\n", - __FILE__,__LINE__, info->device_name ); - - cflag = info->port.tty->termios.c_cflag; - - /* if B0 rate (hangup) specified then negate RTS and DTR */ - /* otherwise assert RTS and DTR */ - if (cflag & CBAUD) - info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; - else - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - - /* byte size and parity */ - - switch (cflag & CSIZE) { - case CS5: info->params.data_bits = 5; break; - case CS6: info->params.data_bits = 6; break; - case CS7: info->params.data_bits = 7; break; - case CS8: info->params.data_bits = 8; break; - /* Never happens, but GCC is too dumb to figure it out */ - default: info->params.data_bits = 7; break; - } - - if (cflag & CSTOPB) - info->params.stop_bits = 2; - else - info->params.stop_bits = 1; - - info->params.parity = ASYNC_PARITY_NONE; - if (cflag & PARENB) { - if (cflag & PARODD) - info->params.parity = ASYNC_PARITY_ODD; - else - info->params.parity = ASYNC_PARITY_EVEN; -#ifdef CMSPAR - if (cflag & CMSPAR) - info->params.parity = ASYNC_PARITY_SPACE; -#endif - } - - /* calculate number of jiffies to transmit a full - * FIFO (32 bytes) at specified data rate - */ - bits_per_char = info->params.data_bits + - info->params.stop_bits + 1; - - /* if port data rate is set to 460800 or less then - * allow tty settings to override, otherwise keep the - * current data rate. - */ - if (info->params.data_rate <= 460800) - info->params.data_rate = tty_get_baud_rate(info->port.tty); - - if ( info->params.data_rate ) { - info->timeout = (32*HZ*bits_per_char) / - info->params.data_rate; - } - info->timeout += HZ/50; /* Add .02 seconds of slop */ - - tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); - tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); - - /* process tty input control flags */ - - info->read_status_mask = RXSTATUS_OVERRUN; - if (I_INPCK(info->port.tty)) - info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask |= RXSTATUS_BREAK_RECEIVED; - - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR; - if (I_IGNBRK(info->port.tty)) { - info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED; - /* If ignoring parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= RXSTATUS_OVERRUN; - } - - mgsl_program_hw(info); - -} /* end of mgsl_change_params() */ - -/* mgsl_put_char() - * - * Add a character to the transmit buffer. - * - * Arguments: tty pointer to tty information structure - * ch character to add to transmit buffer - * - * Return Value: None - */ -static int mgsl_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - int ret = 0; - - if (debug_level >= DEBUG_LEVEL_INFO) { - printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n", - __FILE__, __LINE__, ch, info->device_name); - } - - if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char")) - return 0; - - if (!info->xmit_buf) - return 0; - - spin_lock_irqsave(&info->irq_spinlock, flags); - - if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) { - if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) { - info->xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= SERIAL_XMIT_SIZE-1; - info->xmit_cnt++; - ret = 1; - } - } - spin_unlock_irqrestore(&info->irq_spinlock, flags); - return ret; - -} /* end of mgsl_put_char() */ - -/* mgsl_flush_chars() - * - * Enable transmitter so remaining characters in the - * transmit buffer are sent. - * - * Arguments: tty pointer to tty information structure - * Return Value: None - */ -static void mgsl_flush_chars(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n", - __FILE__,__LINE__,info->device_name,info->xmit_cnt); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars")) - return; - - if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !info->xmit_buf) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n", - __FILE__,__LINE__,info->device_name ); - - spin_lock_irqsave(&info->irq_spinlock,flags); - - if (!info->tx_active) { - if ( (info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) { - /* operating in synchronous (frame oriented) mode */ - /* copy data from circular xmit_buf to */ - /* transmit DMA buffer. */ - mgsl_load_tx_dma_buffer(info, - info->xmit_buf,info->xmit_cnt); - } - usc_start_transmitter(info); - } - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - -} /* end of mgsl_flush_chars() */ - -/* mgsl_write() - * - * Send a block of data - * - * Arguments: - * - * tty pointer to tty information structure - * buf pointer to buffer containing send data - * count size of send data in bytes - * - * Return Value: number of characters written - */ -static int mgsl_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_write(%s) count=%d\n", - __FILE__,__LINE__,info->device_name,count); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_write")) - goto cleanup; - - if (!info->xmit_buf) - goto cleanup; - - if ( info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW ) { - /* operating in synchronous (frame oriented) mode */ - if (info->tx_active) { - - if ( info->params.mode == MGSL_MODE_HDLC ) { - ret = 0; - goto cleanup; - } - /* transmitter is actively sending data - - * if we have multiple transmit dma and - * holding buffers, attempt to queue this - * frame for transmission at a later time. - */ - if (info->tx_holding_count >= info->num_tx_holding_buffers ) { - /* no tx holding buffers available */ - ret = 0; - goto cleanup; - } - - /* queue transmit frame request */ - ret = count; - save_tx_buffer_request(info,buf,count); - - /* if we have sufficient tx dma buffers, - * load the next buffered tx request - */ - spin_lock_irqsave(&info->irq_spinlock,flags); - load_next_tx_holding_buffer(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - goto cleanup; - } - - /* if operating in HDLC LoopMode and the adapter */ - /* has yet to be inserted into the loop, we can't */ - /* transmit */ - - if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) && - !usc_loopmode_active(info) ) - { - ret = 0; - goto cleanup; - } - - if ( info->xmit_cnt ) { - /* Send accumulated from send_char() calls */ - /* as frame and wait before accepting more data. */ - ret = 0; - - /* copy data from circular xmit_buf to */ - /* transmit DMA buffer. */ - mgsl_load_tx_dma_buffer(info, - info->xmit_buf,info->xmit_cnt); - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n", - __FILE__,__LINE__,info->device_name); - } else { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n", - __FILE__,__LINE__,info->device_name); - ret = count; - info->xmit_cnt = count; - mgsl_load_tx_dma_buffer(info,buf,count); - } - } else { - while (1) { - spin_lock_irqsave(&info->irq_spinlock,flags); - c = min_t(int, count, - min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - if (c <= 0) { - spin_unlock_irqrestore(&info->irq_spinlock,flags); - break; - } - memcpy(info->xmit_buf + info->xmit_head, buf, c); - info->xmit_head = ((info->xmit_head + c) & - (SERIAL_XMIT_SIZE-1)); - info->xmit_cnt += c; - spin_unlock_irqrestore(&info->irq_spinlock,flags); - buf += c; - count -= c; - ret += c; - } - } - - if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { - spin_lock_irqsave(&info->irq_spinlock,flags); - if (!info->tx_active) - usc_start_transmitter(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } -cleanup: - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_write(%s) returning=%d\n", - __FILE__,__LINE__,info->device_name,ret); - - return ret; - -} /* end of mgsl_write() */ - -/* mgsl_write_room() - * - * Return the count of free bytes in transmit buffer - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static int mgsl_write_room(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - int ret; - - if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room")) - return 0; - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_write_room(%s)=%d\n", - __FILE__,__LINE__, info->device_name,ret ); - - if ( info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW ) { - /* operating in synchronous (frame oriented) mode */ - if ( info->tx_active ) - return 0; - else - return HDLC_MAX_FRAME_SIZE; - } - - return ret; - -} /* end of mgsl_write_room() */ - -/* mgsl_chars_in_buffer() - * - * Return the count of bytes in transmit buffer - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static int mgsl_chars_in_buffer(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_chars_in_buffer(%s)\n", - __FILE__,__LINE__, info->device_name ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer")) - return 0; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n", - __FILE__,__LINE__, info->device_name,info->xmit_cnt ); - - if ( info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW ) { - /* operating in synchronous (frame oriented) mode */ - if ( info->tx_active ) - return info->max_frame_size; - else - return 0; - } - - return info->xmit_cnt; -} /* end of mgsl_chars_in_buffer() */ - -/* mgsl_flush_buffer() - * - * Discard all data in the send buffer - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static void mgsl_flush_buffer(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_flush_buffer(%s) entry\n", - __FILE__,__LINE__, info->device_name ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer")) - return; - - spin_lock_irqsave(&info->irq_spinlock,flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - del_timer(&info->tx_timer); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - tty_wakeup(tty); -} - -/* mgsl_send_xchar() - * - * Send a high-priority XON/XOFF character - * - * Arguments: tty pointer to tty info structure - * ch character to send - * Return Value: None - */ -static void mgsl_send_xchar(struct tty_struct *tty, char ch) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_send_xchar(%s,%d)\n", - __FILE__,__LINE__, info->device_name, ch ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar")) - return; - - info->x_char = ch; - if (ch) { - /* Make sure transmit interrupts are on */ - spin_lock_irqsave(&info->irq_spinlock,flags); - if (!info->tx_enabled) - usc_start_transmitter(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } -} /* end of mgsl_send_xchar() */ - -/* mgsl_throttle() - * - * Signal remote device to throttle send data (our receive data) - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static void mgsl_throttle(struct tty_struct * tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_throttle(%s) entry\n", - __FILE__,__LINE__, info->device_name ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle")) - return; - - if (I_IXOFF(tty)) - mgsl_send_xchar(tty, STOP_CHAR(tty)); - - if (C_CRTSCTS(tty)) { - spin_lock_irqsave(&info->irq_spinlock,flags); - info->serial_signals &= ~SerialSignal_RTS; - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } -} /* end of mgsl_throttle() */ - -/* mgsl_unthrottle() - * - * Signal remote device to stop throttling send data (our receive data) - * - * Arguments: tty pointer to tty info structure - * Return Value: None - */ -static void mgsl_unthrottle(struct tty_struct * tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_unthrottle(%s) entry\n", - __FILE__,__LINE__, info->device_name ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - mgsl_send_xchar(tty, START_CHAR(tty)); - } - - if (C_CRTSCTS(tty)) { - spin_lock_irqsave(&info->irq_spinlock,flags); - info->serial_signals |= SerialSignal_RTS; - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - -} /* end of mgsl_unthrottle() */ - -/* mgsl_get_stats() - * - * get the current serial parameters information - * - * Arguments: info pointer to device instance data - * user_icount pointer to buffer to hold returned stats - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount) -{ - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_get_params(%s)\n", - __FILE__,__LINE__, info->device_name); - - if (!user_icount) { - memset(&info->icount, 0, sizeof(info->icount)); - } else { - mutex_lock(&info->port.mutex); - COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); - mutex_unlock(&info->port.mutex); - if (err) - return -EFAULT; - } - - return 0; - -} /* end of mgsl_get_stats() */ - -/* mgsl_get_params() - * - * get the current serial parameters information - * - * Arguments: info pointer to device instance data - * user_params pointer to buffer to hold returned params - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params) -{ - int err; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_get_params(%s)\n", - __FILE__,__LINE__, info->device_name); - - mutex_lock(&info->port.mutex); - COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); - mutex_unlock(&info->port.mutex); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - return 0; - -} /* end of mgsl_get_params() */ - -/* mgsl_set_params() - * - * set the serial parameters - * - * Arguments: - * - * info pointer to device instance data - * new_params user buffer containing new serial params - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params) -{ - unsigned long flags; - MGSL_PARAMS tmp_params; - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__, - info->device_name ); - COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - mutex_lock(&info->port.mutex); - spin_lock_irqsave(&info->irq_spinlock,flags); - memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - mgsl_change_params(info); - mutex_unlock(&info->port.mutex); - - return 0; - -} /* end of mgsl_set_params() */ - -/* mgsl_get_txidle() - * - * get the current transmit idle mode - * - * Arguments: info pointer to device instance data - * idle_mode pointer to buffer to hold returned idle mode - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode) -{ - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_get_txidle(%s)=%d\n", - __FILE__,__LINE__, info->device_name, info->idle_mode); - - COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - return 0; - -} /* end of mgsl_get_txidle() */ - -/* mgsl_set_txidle() service ioctl to set transmit idle mode - * - * Arguments: info pointer to device instance data - * idle_mode new idle mode - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__, - info->device_name, idle_mode ); - - spin_lock_irqsave(&info->irq_spinlock,flags); - info->idle_mode = idle_mode; - usc_set_txidle( info ); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - return 0; - -} /* end of mgsl_set_txidle() */ - -/* mgsl_txenable() - * - * enable or disable the transmitter - * - * Arguments: - * - * info pointer to device instance data - * enable 1 = enable, 0 = disable - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_txenable(struct mgsl_struct * info, int enable) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__, - info->device_name, enable); - - spin_lock_irqsave(&info->irq_spinlock,flags); - if ( enable ) { - if ( !info->tx_enabled ) { - - usc_start_transmitter(info); - /*-------------------------------------------------- - * if HDLC/SDLC Loop mode, attempt to insert the - * station in the 'loop' by setting CMR:13. Upon - * receipt of the next GoAhead (RxAbort) sequence, - * the OnLoop indicator (CCSR:7) should go active - * to indicate that we are on the loop - *--------------------------------------------------*/ - if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) - usc_loopmode_insert_request( info ); - } - } else { - if ( info->tx_enabled ) - usc_stop_transmitter(info); - } - spin_unlock_irqrestore(&info->irq_spinlock,flags); - return 0; - -} /* end of mgsl_txenable() */ - -/* mgsl_txabort() abort send HDLC frame - * - * Arguments: info pointer to device instance data - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_txabort(struct mgsl_struct * info) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__, - info->device_name); - - spin_lock_irqsave(&info->irq_spinlock,flags); - if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) - { - if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) - usc_loopmode_cancel_transmit( info ); - else - usc_TCmd(info,TCmd_SendAbort); - } - spin_unlock_irqrestore(&info->irq_spinlock,flags); - return 0; - -} /* end of mgsl_txabort() */ - -/* mgsl_rxenable() enable or disable the receiver - * - * Arguments: info pointer to device instance data - * enable 1 = enable, 0 = disable - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_rxenable(struct mgsl_struct * info, int enable) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__, - info->device_name, enable); - - spin_lock_irqsave(&info->irq_spinlock,flags); - if ( enable ) { - if ( !info->rx_enabled ) - usc_start_receiver(info); - } else { - if ( info->rx_enabled ) - usc_stop_receiver(info); - } - spin_unlock_irqrestore(&info->irq_spinlock,flags); - return 0; - -} /* end of mgsl_rxenable() */ - -/* mgsl_wait_event() wait for specified event to occur - * - * Arguments: info pointer to device instance data - * mask pointer to bitmask of events to wait for - * Return Value: 0 if successful and bit mask updated with - * of events triggerred, - * otherwise error code - */ -static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr) -{ - unsigned long flags; - int s; - int rc=0; - struct mgsl_icount cprev, cnow; - int events; - int mask; - struct _input_signal_events oldsigs, newsigs; - DECLARE_WAITQUEUE(wait, current); - - COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); - if (rc) { - return -EFAULT; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__, - info->device_name, mask); - - spin_lock_irqsave(&info->irq_spinlock,flags); - - /* return immediately if state matches requested events */ - usc_get_serial_signals(info); - s = info->serial_signals; - events = mask & - ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + - ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + - ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + - ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); - if (events) { - spin_unlock_irqrestore(&info->irq_spinlock,flags); - goto exit; - } - - /* save current irq counts */ - cprev = info->icount; - oldsigs = info->input_signal_events; - - /* enable hunt and idle irqs if needed */ - if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { - u16 oldreg = usc_InReg(info,RICR); - u16 newreg = oldreg + - (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) + - (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0); - if (oldreg != newreg) - usc_OutReg(info, RICR, newreg); - } - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&info->event_wait_q, &wait); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get current irq counts */ - spin_lock_irqsave(&info->irq_spinlock,flags); - cnow = info->icount; - newsigs = info->input_signal_events; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - /* if no change, wait aborted for some reason */ - if (newsigs.dsr_up == oldsigs.dsr_up && - newsigs.dsr_down == oldsigs.dsr_down && - newsigs.dcd_up == oldsigs.dcd_up && - newsigs.dcd_down == oldsigs.dcd_down && - newsigs.cts_up == oldsigs.cts_up && - newsigs.cts_down == oldsigs.cts_down && - newsigs.ri_up == oldsigs.ri_up && - newsigs.ri_down == oldsigs.ri_down && - cnow.exithunt == cprev.exithunt && - cnow.rxidle == cprev.rxidle) { - rc = -EIO; - break; - } - - events = mask & - ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + - (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + - (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + - (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + - (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + - (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + - (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + - (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + - (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + - (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); - if (events) - break; - - cprev = cnow; - oldsigs = newsigs; - } - - remove_wait_queue(&info->event_wait_q, &wait); - set_current_state(TASK_RUNNING); - - if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { - spin_lock_irqsave(&info->irq_spinlock,flags); - if (!waitqueue_active(&info->event_wait_q)) { - /* disable enable exit hunt mode/idle rcvd IRQs */ - usc_OutReg(info, RICR, usc_InReg(info,RICR) & - ~(RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED)); - } - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } -exit: - if ( rc == 0 ) - PUT_USER(rc, events, mask_ptr); - - return rc; - -} /* end of mgsl_wait_event() */ - -static int modem_input_wait(struct mgsl_struct *info,int arg) -{ - unsigned long flags; - int rc; - struct mgsl_icount cprev, cnow; - DECLARE_WAITQUEUE(wait, current); - - /* save current irq counts */ - spin_lock_irqsave(&info->irq_spinlock,flags); - cprev = info->icount; - add_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get new irq counts */ - spin_lock_irqsave(&info->irq_spinlock,flags); - cnow = info->icount; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - /* if no change, wait aborted for some reason */ - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - rc = -EIO; - break; - } - - /* check for change in caller specified modem input */ - if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || - (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || - (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || - (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { - rc = 0; - break; - } - - cprev = cnow; - } - remove_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_RUNNING); - return rc; -} - -/* return the state of the serial control and status signals - */ -static int tiocmget(struct tty_struct *tty) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_get_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + - ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + - ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) + - ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) + - ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) + - ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tiocmget() value=%08X\n", - __FILE__,__LINE__, info->device_name, result ); - return result; -} - -/* set modem control signals (DTR/RTS) - */ -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tiocmset(%x,%x)\n", - __FILE__,__LINE__,info->device_name, set, clear); - - if (set & TIOCM_RTS) - info->serial_signals |= SerialSignal_RTS; - if (set & TIOCM_DTR) - info->serial_signals |= SerialSignal_DTR; - if (clear & TIOCM_RTS) - info->serial_signals &= ~SerialSignal_RTS; - if (clear & TIOCM_DTR) - info->serial_signals &= ~SerialSignal_DTR; - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - return 0; -} - -/* mgsl_break() Set or clear transmit break condition - * - * Arguments: tty pointer to tty instance data - * break_state -1=set break condition, 0=clear - * Return Value: error code - */ -static int mgsl_break(struct tty_struct *tty, int break_state) -{ - struct mgsl_struct * info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_break(%s,%d)\n", - __FILE__,__LINE__, info->device_name, break_state); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_break")) - return -EINVAL; - - spin_lock_irqsave(&info->irq_spinlock,flags); - if (break_state == -1) - usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7)); - else - usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7)); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - return 0; - -} /* end of mgsl_break() */ - -/* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ -static int msgl_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) - -{ - struct mgsl_struct * info = tty->driver_data; - struct mgsl_icount cnow; /* kernel counter temps */ - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - return 0; -} - -/* mgsl_ioctl() Service an IOCTL request - * - * Arguments: - * - * tty pointer to tty instance data - * cmd IOCTL command code - * arg command argument/context - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct mgsl_struct * info = tty->driver_data; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__, - info->device_name, cmd ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl")) - return -ENODEV; - - if (cmd != TIOCMIWAIT) { - if (tty_io_error(tty)) - return -EIO; - } - - return mgsl_ioctl_common(info, cmd, arg); -} - -static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg) -{ - void __user *argp = (void __user *)arg; - - switch (cmd) { - case MGSL_IOCGPARAMS: - return mgsl_get_params(info, argp); - case MGSL_IOCSPARAMS: - return mgsl_set_params(info, argp); - case MGSL_IOCGTXIDLE: - return mgsl_get_txidle(info, argp); - case MGSL_IOCSTXIDLE: - return mgsl_set_txidle(info,(int)arg); - case MGSL_IOCTXENABLE: - return mgsl_txenable(info,(int)arg); - case MGSL_IOCRXENABLE: - return mgsl_rxenable(info,(int)arg); - case MGSL_IOCTXABORT: - return mgsl_txabort(info); - case MGSL_IOCGSTATS: - return mgsl_get_stats(info, argp); - case MGSL_IOCWAITEVENT: - return mgsl_wait_event(info, argp); - case MGSL_IOCLOOPTXDONE: - return mgsl_loopmode_send_done(info); - /* Wait for modem input (DCD,RI,DSR,CTS) change - * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS) - */ - case TIOCMIWAIT: - return modem_input_wait(info,(int)arg); - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -/* mgsl_set_termios() - * - * Set new termios settings - * - * Arguments: - * - * tty pointer to tty structure - * termios pointer to buffer to hold returned old termios - * - * Return Value: None - */ -static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__, - tty->driver->name ); - - mgsl_change_params(info); - - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) { - info->serial_signals |= SerialSignal_DTR; - if (!C_CRTSCTS(tty) || !tty_throttled(tty)) - info->serial_signals |= SerialSignal_RTS; - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - - /* Handle turning off CRTSCTS */ - if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) { - tty->hw_stopped = 0; - mgsl_start(tty); - } - -} /* end of mgsl_set_termios() */ - -/* mgsl_close() - * - * Called when port is closed. Wait for remaining data to be - * sent. Disable port and free resources. - * - * Arguments: - * - * tty pointer to open tty structure - * filp pointer to open file object - * - * Return Value: None - */ -static void mgsl_close(struct tty_struct *tty, struct file * filp) -{ - struct mgsl_struct * info = tty->driver_data; - - if (mgsl_paranoia_check(info, tty->name, "mgsl_close")) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_close(%s) entry, count=%d\n", - __FILE__,__LINE__, info->device_name, info->port.count); - - if (tty_port_close_start(&info->port, tty, filp) == 0) - goto cleanup; - - mutex_lock(&info->port.mutex); - if (tty_port_initialized(&info->port)) - mgsl_wait_until_sent(tty, info->timeout); - mgsl_flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - mutex_unlock(&info->port.mutex); - - tty_port_close_end(&info->port, tty); - info->port.tty = NULL; -cleanup: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__, - tty->driver->name, info->port.count); - -} /* end of mgsl_close() */ - -/* mgsl_wait_until_sent() - * - * Wait until the transmitter is empty. - * - * Arguments: - * - * tty pointer to tty info structure - * timeout time to wait for send completion - * - * Return Value: None - */ -static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct mgsl_struct * info = tty->driver_data; - unsigned long orig_jiffies, char_time; - - if (!info ) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_wait_until_sent(%s) entry\n", - __FILE__,__LINE__, info->device_name ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent")) - return; - - if (!tty_port_initialized(&info->port)) - goto exit; - - orig_jiffies = jiffies; - - /* Set check interval to 1/5 of estimated time to - * send a character, and make it at least 1. The check - * interval should also be less than the timeout. - * Note: use tight timings here to satisfy the NIST-PCTS. - */ - - if ( info->params.data_rate ) { - char_time = info->timeout/(32 * 5); - if (!char_time) - char_time++; - } else - char_time = 1; - - if (timeout) - char_time = min_t(unsigned long, char_time, timeout); - - if ( info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW ) { - while (info->tx_active) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - } else { - while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) && - info->tx_enabled) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - } - -exit: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_wait_until_sent(%s) exit\n", - __FILE__,__LINE__, info->device_name ); - -} /* end of mgsl_wait_until_sent() */ - -/* mgsl_hangup() - * - * Called by tty_hangup() when a hangup is signaled. - * This is the same as to closing all open files for the port. - * - * Arguments: tty pointer to associated tty object - * Return Value: None - */ -static void mgsl_hangup(struct tty_struct *tty) -{ - struct mgsl_struct * info = tty->driver_data; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_hangup(%s)\n", - __FILE__,__LINE__, info->device_name ); - - if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup")) - return; - - mgsl_flush_buffer(tty); - shutdown(info); - - info->port.count = 0; - tty_port_set_active(&info->port, 0); - info->port.tty = NULL; - - wake_up_interruptible(&info->port.open_wait); - -} /* end of mgsl_hangup() */ - -/* - * carrier_raised() - * - * Return true if carrier is raised - */ - -static int carrier_raised(struct tty_port *port) -{ - unsigned long flags; - struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); - - spin_lock_irqsave(&info->irq_spinlock, flags); - usc_get_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock, flags); - return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; -} - -static void dtr_rts(struct tty_port *port, int on) -{ - struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - if (on) - info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; - else - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - usc_set_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); -} - - -/* block_til_ready() - * - * Block the current process until the specified port - * is ready to be opened. - * - * Arguments: - * - * tty pointer to tty info structure - * filp pointer to open file object - * info pointer to device instance data - * - * Return Value: 0 if success, otherwise error code - */ -static int block_til_ready(struct tty_struct *tty, struct file * filp, - struct mgsl_struct *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - bool do_clocal = false; - unsigned long flags; - int dcd; - struct tty_port *port = &info->port; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready on %s\n", - __FILE__,__LINE__, tty->driver->name ); - - if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) { - /* nonblock mode is set or port is not enabled */ - tty_port_set_active(port, 1); - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = true; - - /* Wait for carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * mgsl_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - - retval = 0; - add_wait_queue(&port->open_wait, &wait); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready before block on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - spin_lock_irqsave(&info->irq_spinlock, flags); - port->count--; - spin_unlock_irqrestore(&info->irq_spinlock, flags); - port->blocked_open++; - - while (1) { - if (C_BAUD(tty) && tty_port_initialized(port)) - tty_port_raise_dtr_rts(port); - - set_current_state(TASK_INTERRUPTIBLE); - - if (tty_hung_up_p(filp) || !tty_port_initialized(port)) { - retval = (port->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS; - break; - } - - dcd = tty_port_carrier_raised(&info->port); - if (do_clocal || dcd) - break; - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - tty_unlock(tty); - schedule(); - tty_lock(tty); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - - /* FIXME: Racy on hangup during close wait */ - if (!tty_hung_up_p(filp)) - port->count++; - port->blocked_open--; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready after blocking on %s count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - if (!retval) - tty_port_set_active(port, 1); - - return retval; - -} /* end of block_til_ready() */ - -static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty) -{ - struct mgsl_struct *info; - int line = tty->index; - - /* verify range of specified line number */ - if (line >= mgsl_device_count) { - printk("%s(%d):mgsl_open with invalid line #%d.\n", - __FILE__, __LINE__, line); - return -ENODEV; - } - - /* find the info structure for the specified line */ - info = mgsl_device_list; - while (info && info->line != line) - info = info->next_device; - if (mgsl_paranoia_check(info, tty->name, "mgsl_open")) - return -ENODEV; - tty->driver_data = info; - - return tty_port_install(&info->port, driver, tty); -} - -/* mgsl_open() - * - * Called when a port is opened. Init and enable port. - * Perform serial-specific initialization for the tty structure. - * - * Arguments: tty pointer to tty info structure - * filp associated file pointer - * - * Return Value: 0 if success, otherwise error code - */ -static int mgsl_open(struct tty_struct *tty, struct file * filp) -{ - struct mgsl_struct *info = tty->driver_data; - unsigned long flags; - int retval; - - info->port.tty = tty; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_open(%s), old ref count = %d\n", - __FILE__,__LINE__,tty->driver->name, info->port.count); - - info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - spin_lock_irqsave(&info->netlock, flags); - if (info->netcount) { - retval = -EBUSY; - spin_unlock_irqrestore(&info->netlock, flags); - goto cleanup; - } - info->port.count++; - spin_unlock_irqrestore(&info->netlock, flags); - - if (info->port.count == 1) { - /* 1st open on this device, init hardware */ - retval = startup(info); - if (retval < 0) - goto cleanup; - } - - retval = block_til_ready(tty, filp, info); - if (retval) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):block_til_ready(%s) returned %d\n", - __FILE__,__LINE__, info->device_name, retval); - goto cleanup; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_open(%s) success\n", - __FILE__,__LINE__, info->device_name); - retval = 0; - -cleanup: - if (retval) { - if (tty->count == 1) - info->port.tty = NULL; /* tty layer will release tty struct */ - if(info->port.count) - info->port.count--; - } - - return retval; - -} /* end of mgsl_open() */ - -/* - * /proc fs routines.... - */ - -static inline void line_info(struct seq_file *m, struct mgsl_struct *info) -{ - char stat_buf[30]; - unsigned long flags; - - seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X", - info->device_name, info->io_base, info->irq_level, - info->phys_memory_base, info->phys_lcr_base); - - /* output current serial signal states */ - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_get_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - stat_buf[0] = 0; - stat_buf[1] = 0; - if (info->serial_signals & SerialSignal_RTS) - strcat(stat_buf, "|RTS"); - if (info->serial_signals & SerialSignal_CTS) - strcat(stat_buf, "|CTS"); - if (info->serial_signals & SerialSignal_DTR) - strcat(stat_buf, "|DTR"); - if (info->serial_signals & SerialSignal_DSR) - strcat(stat_buf, "|DSR"); - if (info->serial_signals & SerialSignal_DCD) - strcat(stat_buf, "|CD"); - if (info->serial_signals & SerialSignal_RI) - strcat(stat_buf, "|RI"); - - if (info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW ) { - seq_printf(m, " HDLC txok:%d rxok:%d", - info->icount.txok, info->icount.rxok); - if (info->icount.txunder) - seq_printf(m, " txunder:%d", info->icount.txunder); - if (info->icount.txabort) - seq_printf(m, " txabort:%d", info->icount.txabort); - if (info->icount.rxshort) - seq_printf(m, " rxshort:%d", info->icount.rxshort); - if (info->icount.rxlong) - seq_printf(m, " rxlong:%d", info->icount.rxlong); - if (info->icount.rxover) - seq_printf(m, " rxover:%d", info->icount.rxover); - if (info->icount.rxcrc) - seq_printf(m, " rxcrc:%d", info->icount.rxcrc); - } else { - seq_printf(m, " ASYNC tx:%d rx:%d", - info->icount.tx, info->icount.rx); - if (info->icount.frame) - seq_printf(m, " fe:%d", info->icount.frame); - if (info->icount.parity) - seq_printf(m, " pe:%d", info->icount.parity); - if (info->icount.brk) - seq_printf(m, " brk:%d", info->icount.brk); - if (info->icount.overrun) - seq_printf(m, " oe:%d", info->icount.overrun); - } - - /* Append serial signal status to end */ - seq_printf(m, " %s\n", stat_buf+1); - - seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", - info->tx_active,info->bh_requested,info->bh_running, - info->pending_bh); - - spin_lock_irqsave(&info->irq_spinlock,flags); - { - u16 Tcsr = usc_InReg( info, TCSR ); - u16 Tdmr = usc_InDmaReg( info, TDMR ); - u16 Ticr = usc_InReg( info, TICR ); - u16 Rscr = usc_InReg( info, RCSR ); - u16 Rdmr = usc_InDmaReg( info, RDMR ); - u16 Ricr = usc_InReg( info, RICR ); - u16 Icr = usc_InReg( info, ICR ); - u16 Dccr = usc_InReg( info, DCCR ); - u16 Tmr = usc_InReg( info, TMR ); - u16 Tccr = usc_InReg( info, TCCR ); - u16 Ccar = inw( info->io_base + CCAR ); - seq_printf(m, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n" - "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n", - Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar ); - } - spin_unlock_irqrestore(&info->irq_spinlock,flags); -} - -/* Called to print information about devices */ -static int mgsl_proc_show(struct seq_file *m, void *v) -{ - struct mgsl_struct *info; - - seq_printf(m, "synclink driver:%s\n", driver_version); - - info = mgsl_device_list; - while( info ) { - line_info(m, info); - info = info->next_device; - } - return 0; -} - -/* mgsl_allocate_dma_buffers() - * - * Allocate and format DMA buffers (ISA adapter) - * or format shared memory buffers (PCI adapter). - * - * Arguments: info pointer to device instance data - * Return Value: 0 if success, otherwise error - */ -static int mgsl_allocate_dma_buffers(struct mgsl_struct *info) -{ - unsigned short BuffersPerFrame; - - info->last_mem_alloc = 0; - - /* Calculate the number of DMA buffers necessary to hold the */ - /* largest allowable frame size. Note: If the max frame size is */ - /* not an even multiple of the DMA buffer size then we need to */ - /* round the buffer count per frame up one. */ - - BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE); - if ( info->max_frame_size % DMABUFFERSIZE ) - BuffersPerFrame++; - - /* - * The PCI adapter has 256KBytes of shared memory to use. This is 64 - * PAGE_SIZE buffers. - * - * The first page is used for padding at this time so the buffer list - * does not begin at offset 0 of the PCI adapter's shared memory. - * - * The 2nd page is used for the buffer list. A 4K buffer list can hold - * 128 DMA_BUFFER structures at 32 bytes each. - * - * This leaves 62 4K pages. - * - * The next N pages are used for transmit frame(s). We reserve enough - * 4K page blocks to hold the required number of transmit dma buffers - * (num_tx_dma_buffers), each of MaxFrameSize size. - * - * Of the remaining pages (62-N), determine how many can be used to - * receive full MaxFrameSize inbound frames - */ - info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame; - info->rx_buffer_count = 62 - info->tx_buffer_count; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n", - __FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count); - - if ( mgsl_alloc_buffer_list_memory( info ) < 0 || - mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 || - mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 || - mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 || - mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) { - printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__); - return -ENOMEM; - } - - mgsl_reset_rx_dma_buffers( info ); - mgsl_reset_tx_dma_buffers( info ); - - return 0; - -} /* end of mgsl_allocate_dma_buffers() */ - -/* - * mgsl_alloc_buffer_list_memory() - * - * Allocate a common DMA buffer for use as the - * receive and transmit buffer lists. - * - * A buffer list is a set of buffer entries where each entry contains - * a pointer to an actual buffer and a pointer to the next buffer entry - * (plus some other info about the buffer). - * - * The buffer entries for a list are built to form a circular list so - * that when the entire list has been traversed you start back at the - * beginning. - * - * This function allocates memory for just the buffer entries. - * The links (pointer to next entry) are filled in with the physical - * address of the next entry so the adapter can navigate the list - * using bus master DMA. The pointers to the actual buffers are filled - * out later when the actual buffers are allocated. - * - * Arguments: info pointer to device instance data - * Return Value: 0 if success, otherwise error - */ -static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info ) -{ - unsigned int i; - - /* PCI adapter uses shared memory. */ - info->buffer_list = info->memory_base + info->last_mem_alloc; - info->buffer_list_phys = info->last_mem_alloc; - info->last_mem_alloc += BUFFERLISTSIZE; - - /* We got the memory for the buffer entry lists. */ - /* Initialize the memory block to all zeros. */ - memset( info->buffer_list, 0, BUFFERLISTSIZE ); - - /* Save virtual address pointers to the receive and */ - /* transmit buffer lists. (Receive 1st). These pointers will */ - /* be used by the processor to access the lists. */ - info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list; - info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list; - info->tx_buffer_list += info->rx_buffer_count; - - /* - * Build the links for the buffer entry lists such that - * two circular lists are built. (Transmit and Receive). - * - * Note: the links are physical addresses - * which are read by the adapter to determine the next - * buffer entry to use. - */ - - for ( i = 0; i < info->rx_buffer_count; i++ ) { - /* calculate and store physical address of this buffer entry */ - info->rx_buffer_list[i].phys_entry = - info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY)); - - /* calculate and store physical address of */ - /* next entry in cirular list of entries */ - - info->rx_buffer_list[i].link = info->buffer_list_phys; - - if ( i < info->rx_buffer_count - 1 ) - info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY); - } - - for ( i = 0; i < info->tx_buffer_count; i++ ) { - /* calculate and store physical address of this buffer entry */ - info->tx_buffer_list[i].phys_entry = info->buffer_list_phys + - ((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY)); - - /* calculate and store physical address of */ - /* next entry in cirular list of entries */ - - info->tx_buffer_list[i].link = info->buffer_list_phys + - info->rx_buffer_count * sizeof(DMABUFFERENTRY); - - if ( i < info->tx_buffer_count - 1 ) - info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY); - } - - return 0; - -} /* end of mgsl_alloc_buffer_list_memory() */ - -/* Free DMA buffers allocated for use as the - * receive and transmit buffer lists. - * Warning: - * - * The data transfer buffers associated with the buffer list - * MUST be freed before freeing the buffer list itself because - * the buffer list contains the information necessary to free - * the individual buffers! - */ -static void mgsl_free_buffer_list_memory( struct mgsl_struct *info ) -{ - info->buffer_list = NULL; - info->rx_buffer_list = NULL; - info->tx_buffer_list = NULL; - -} /* end of mgsl_free_buffer_list_memory() */ - -/* - * mgsl_alloc_frame_memory() - * - * Allocate the frame DMA buffers used by the specified buffer list. - * Each DMA buffer will be one memory page in size. This is necessary - * because memory can fragment enough that it may be impossible - * contiguous pages. - * - * Arguments: - * - * info pointer to device instance data - * BufferList pointer to list of buffer entries - * Buffercount count of buffer entries in buffer list - * - * Return Value: 0 if success, otherwise -ENOMEM - */ -static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount) -{ - int i; - - /* Allocate page sized buffers for the receive buffer list */ - - for ( i = 0; i < Buffercount; i++ ) { - BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc; - BufferList[i].phys_addr = info->last_mem_alloc; - info->last_mem_alloc += DMABUFFERSIZE; - } - - return 0; - -} /* end of mgsl_alloc_frame_memory() */ - -/* - * mgsl_free_frame_memory() - * - * Free the buffers associated with - * each buffer entry of a buffer list. - * - * Arguments: - * - * info pointer to device instance data - * BufferList pointer to list of buffer entries - * Buffercount count of buffer entries in buffer list - * - * Return Value: None - */ -static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount) -{ - int i; - - if ( BufferList ) { - for ( i = 0 ; i < Buffercount ; i++ ) { - if ( BufferList[i].virt_addr ) { - BufferList[i].virt_addr = NULL; - } - } - } - -} /* end of mgsl_free_frame_memory() */ - -/* mgsl_free_dma_buffers() - * - * Free DMA buffers - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_free_dma_buffers( struct mgsl_struct *info ) -{ - mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count ); - mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count ); - mgsl_free_buffer_list_memory( info ); - -} /* end of mgsl_free_dma_buffers() */ - - -/* - * mgsl_alloc_intermediate_rxbuffer_memory() - * - * Allocate a buffer large enough to hold max_frame_size. This buffer - * is used to pass an assembled frame to the line discipline. - * - * Arguments: - * - * info pointer to device instance data - * - * Return Value: 0 if success, otherwise -ENOMEM - */ -static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info) -{ - info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA); - if ( info->intermediate_rxbuffer == NULL ) - return -ENOMEM; - /* unused flag buffer to satisfy receive_buf calling interface */ - info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL); - if (!info->flag_buf) { - kfree(info->intermediate_rxbuffer); - info->intermediate_rxbuffer = NULL; - return -ENOMEM; - } - return 0; - -} /* end of mgsl_alloc_intermediate_rxbuffer_memory() */ - -/* - * mgsl_free_intermediate_rxbuffer_memory() - * - * - * Arguments: - * - * info pointer to device instance data - * - * Return Value: None - */ -static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info) -{ - kfree(info->intermediate_rxbuffer); - info->intermediate_rxbuffer = NULL; - kfree(info->flag_buf); - info->flag_buf = NULL; - -} /* end of mgsl_free_intermediate_rxbuffer_memory() */ - -/* - * mgsl_alloc_intermediate_txbuffer_memory() - * - * Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size. - * This buffer is used to load transmit frames into the adapter's dma transfer - * buffers when there is sufficient space. - * - * Arguments: - * - * info pointer to device instance data - * - * Return Value: 0 if success, otherwise -ENOMEM - */ -static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info) -{ - int i; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s %s(%d) allocating %d tx holding buffers\n", - info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers); - - memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers)); - - for ( i=0; i<info->num_tx_holding_buffers; ++i) { - info->tx_holding_buffers[i].buffer = - kmalloc(info->max_frame_size, GFP_KERNEL); - if (info->tx_holding_buffers[i].buffer == NULL) { - for (--i; i >= 0; i--) { - kfree(info->tx_holding_buffers[i].buffer); - info->tx_holding_buffers[i].buffer = NULL; - } - return -ENOMEM; - } - } - - return 0; - -} /* end of mgsl_alloc_intermediate_txbuffer_memory() */ - -/* - * mgsl_free_intermediate_txbuffer_memory() - * - * - * Arguments: - * - * info pointer to device instance data - * - * Return Value: None - */ -static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info) -{ - int i; - - for ( i=0; i<info->num_tx_holding_buffers; ++i ) { - kfree(info->tx_holding_buffers[i].buffer); - info->tx_holding_buffers[i].buffer = NULL; - } - - info->get_tx_holding_index = 0; - info->put_tx_holding_index = 0; - info->tx_holding_count = 0; - -} /* end of mgsl_free_intermediate_txbuffer_memory() */ - - -/* - * load_next_tx_holding_buffer() - * - * attempts to load the next buffered tx request into the - * tx dma buffers - * - * Arguments: - * - * info pointer to device instance data - * - * Return Value: true if next buffered tx request loaded - * into adapter's tx dma buffer, - * false otherwise - */ -static bool load_next_tx_holding_buffer(struct mgsl_struct *info) -{ - bool ret = false; - - if ( info->tx_holding_count ) { - /* determine if we have enough tx dma buffers - * to accommodate the next tx frame - */ - struct tx_holding_buffer *ptx = - &info->tx_holding_buffers[info->get_tx_holding_index]; - int num_free = num_free_tx_dma_buffers(info); - int num_needed = ptx->buffer_size / DMABUFFERSIZE; - if ( ptx->buffer_size % DMABUFFERSIZE ) - ++num_needed; - - if (num_needed <= num_free) { - info->xmit_cnt = ptx->buffer_size; - mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size); - - --info->tx_holding_count; - if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers) - info->get_tx_holding_index=0; - - /* restart transmit timer */ - mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000)); - - ret = true; - } - } - - return ret; -} - -/* - * save_tx_buffer_request() - * - * attempt to store transmit frame request for later transmission - * - * Arguments: - * - * info pointer to device instance data - * Buffer pointer to buffer containing frame to load - * BufferSize size in bytes of frame in Buffer - * - * Return Value: 1 if able to store, 0 otherwise - */ -static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize) -{ - struct tx_holding_buffer *ptx; - - if ( info->tx_holding_count >= info->num_tx_holding_buffers ) { - return 0; /* all buffers in use */ - } - - ptx = &info->tx_holding_buffers[info->put_tx_holding_index]; - ptx->buffer_size = BufferSize; - memcpy( ptx->buffer, Buffer, BufferSize); - - ++info->tx_holding_count; - if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers) - info->put_tx_holding_index=0; - - return 1; -} - -static int mgsl_claim_resources(struct mgsl_struct *info) -{ - if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) { - printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->io_base); - return -ENODEV; - } - info->io_addr_requested = true; - - if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags, - info->device_name, info ) < 0 ) { - printk( "%s(%d):Can't request interrupt on device %s IRQ=%d\n", - __FILE__,__LINE__,info->device_name, info->irq_level ); - goto errout; - } - info->irq_requested = true; - - if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) { - printk( "%s(%d):mem addr conflict device %s Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base); - goto errout; - } - info->shared_mem_requested = true; - if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) { - printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset); - goto errout; - } - info->lcr_mem_requested = true; - - info->memory_base = ioremap(info->phys_memory_base, 0x40000); - if (!info->memory_base) { - printk( "%s(%d):Can't map shared memory on device %s MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base ); - goto errout; - } - - if ( !mgsl_memory_test(info) ) { - printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base ); - goto errout; - } - - info->lcr_base = ioremap(info->phys_lcr_base, PAGE_SIZE); - if (!info->lcr_base) { - printk( "%s(%d):Can't map LCR memory on device %s MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); - goto errout; - } - info->lcr_base += info->lcr_offset; - - if ( mgsl_allocate_dma_buffers(info) < 0 ) { - printk( "%s(%d):Can't allocate DMA buffers on device %s DMA=%d\n", - __FILE__,__LINE__,info->device_name, info->dma_level ); - goto errout; - } - - return 0; -errout: - mgsl_release_resources(info); - return -ENODEV; - -} /* end of mgsl_claim_resources() */ - -static void mgsl_release_resources(struct mgsl_struct *info) -{ - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_release_resources(%s) entry\n", - __FILE__,__LINE__,info->device_name ); - - if ( info->irq_requested ) { - free_irq(info->irq_level, info); - info->irq_requested = false; - } - if ( info->dma_requested ) { - disable_dma(info->dma_level); - free_dma(info->dma_level); - info->dma_requested = false; - } - mgsl_free_dma_buffers(info); - mgsl_free_intermediate_rxbuffer_memory(info); - mgsl_free_intermediate_txbuffer_memory(info); - - if ( info->io_addr_requested ) { - release_region(info->io_base,info->io_addr_size); - info->io_addr_requested = false; - } - if ( info->shared_mem_requested ) { - release_mem_region(info->phys_memory_base,0x40000); - info->shared_mem_requested = false; - } - if ( info->lcr_mem_requested ) { - release_mem_region(info->phys_lcr_base + info->lcr_offset,128); - info->lcr_mem_requested = false; - } - if (info->memory_base){ - iounmap(info->memory_base); - info->memory_base = NULL; - } - if (info->lcr_base){ - iounmap(info->lcr_base - info->lcr_offset); - info->lcr_base = NULL; - } - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_release_resources(%s) exit\n", - __FILE__,__LINE__,info->device_name ); - -} /* end of mgsl_release_resources() */ - -/* mgsl_add_device() - * - * Add the specified device instance data structure to the - * global linked list of devices and increment the device count. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_add_device( struct mgsl_struct *info ) -{ - info->next_device = NULL; - info->line = mgsl_device_count; - sprintf(info->device_name,"ttySL%d",info->line); - - if (info->line < MAX_TOTAL_DEVICES) { - if (maxframe[info->line]) - info->max_frame_size = maxframe[info->line]; - - if (txdmabufs[info->line]) { - info->num_tx_dma_buffers = txdmabufs[info->line]; - if (info->num_tx_dma_buffers < 1) - info->num_tx_dma_buffers = 1; - } - - if (txholdbufs[info->line]) { - info->num_tx_holding_buffers = txholdbufs[info->line]; - if (info->num_tx_holding_buffers < 1) - info->num_tx_holding_buffers = 1; - else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS) - info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS; - } - } - - mgsl_device_count++; - - if ( !mgsl_device_list ) - mgsl_device_list = info; - else { - struct mgsl_struct *current_dev = mgsl_device_list; - while( current_dev->next_device ) - current_dev = current_dev->next_device; - current_dev->next_device = info; - } - - if ( info->max_frame_size < 4096 ) - info->max_frame_size = 4096; - else if ( info->max_frame_size > 65535 ) - info->max_frame_size = 65535; - - printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n", - info->hw_version + 1, info->device_name, info->io_base, info->irq_level, - info->phys_memory_base, info->phys_lcr_base, - info->max_frame_size ); - -#if SYNCLINK_GENERIC_HDLC - hdlcdev_init(info); -#endif - -} /* end of mgsl_add_device() */ - -static const struct tty_port_operations mgsl_port_ops = { - .carrier_raised = carrier_raised, - .dtr_rts = dtr_rts, -}; - - -/* mgsl_allocate_device() - * - * Allocate and initialize a device instance structure - * - * Arguments: none - * Return Value: pointer to mgsl_struct if success, otherwise NULL - */ -static struct mgsl_struct* mgsl_allocate_device(void) -{ - struct mgsl_struct *info; - - info = kzalloc(sizeof(struct mgsl_struct), - GFP_KERNEL); - - if (!info) { - printk("Error can't allocate device instance data\n"); - } else { - tty_port_init(&info->port); - info->port.ops = &mgsl_port_ops; - info->magic = MGSL_MAGIC; - INIT_WORK(&info->task, mgsl_bh_handler); - info->max_frame_size = 4096; - info->port.close_delay = 5*HZ/10; - info->port.closing_wait = 30*HZ; - init_waitqueue_head(&info->status_event_wait_q); - init_waitqueue_head(&info->event_wait_q); - spin_lock_init(&info->irq_spinlock); - spin_lock_init(&info->netlock); - memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); - info->idle_mode = HDLC_TXIDLE_FLAGS; - info->num_tx_dma_buffers = 1; - info->num_tx_holding_buffers = 0; - } - - return info; - -} /* end of mgsl_allocate_device()*/ - -static const struct tty_operations mgsl_ops = { - .install = mgsl_install, - .open = mgsl_open, - .close = mgsl_close, - .write = mgsl_write, - .put_char = mgsl_put_char, - .flush_chars = mgsl_flush_chars, - .write_room = mgsl_write_room, - .chars_in_buffer = mgsl_chars_in_buffer, - .flush_buffer = mgsl_flush_buffer, - .ioctl = mgsl_ioctl, - .throttle = mgsl_throttle, - .unthrottle = mgsl_unthrottle, - .send_xchar = mgsl_send_xchar, - .break_ctl = mgsl_break, - .wait_until_sent = mgsl_wait_until_sent, - .set_termios = mgsl_set_termios, - .stop = mgsl_stop, - .start = mgsl_start, - .hangup = mgsl_hangup, - .tiocmget = tiocmget, - .tiocmset = tiocmset, - .get_icount = msgl_get_icount, - .proc_show = mgsl_proc_show, -}; - -/* - * perform tty device initialization - */ -static int mgsl_init_tty(void) -{ - int rc; - - serial_driver = alloc_tty_driver(128); - if (!serial_driver) - return -ENOMEM; - - serial_driver->driver_name = "synclink"; - serial_driver->name = "ttySL"; - serial_driver->major = ttymajor; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->init_termios.c_ispeed = 9600; - serial_driver->init_termios.c_ospeed = 9600; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &mgsl_ops); - if ((rc = tty_register_driver(serial_driver)) < 0) { - printk("%s(%d):Couldn't register serial driver\n", - __FILE__,__LINE__); - put_tty_driver(serial_driver); - serial_driver = NULL; - return rc; - } - - printk("%s %s, tty major#%d\n", - driver_name, driver_version, - serial_driver->major); - return 0; -} - -static void synclink_cleanup(void) -{ - int rc; - struct mgsl_struct *info; - struct mgsl_struct *tmp; - - printk("Unloading %s: %s\n", driver_name, driver_version); - - if (serial_driver) { - rc = tty_unregister_driver(serial_driver); - if (rc) - printk("%s(%d) failed to unregister tty driver err=%d\n", - __FILE__,__LINE__,rc); - put_tty_driver(serial_driver); - } - - info = mgsl_device_list; - while(info) { -#if SYNCLINK_GENERIC_HDLC - hdlcdev_exit(info); -#endif - mgsl_release_resources(info); - tmp = info; - info = info->next_device; - tty_port_destroy(&tmp->port); - kfree(tmp); - } - - if (pci_registered) - pci_unregister_driver(&synclink_pci_driver); -} - -static int __init synclink_init(void) -{ - int rc; - - if (break_on_load) { - mgsl_get_text_ptr(); - BREAKPOINT(); - } - - printk("%s %s\n", driver_name, driver_version); - - if ((rc = pci_register_driver(&synclink_pci_driver)) < 0) - printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); - else - pci_registered = true; - - if ((rc = mgsl_init_tty()) < 0) - goto error; - - return 0; - -error: - synclink_cleanup(); - return rc; -} - -static void __exit synclink_exit(void) -{ - synclink_cleanup(); -} - -module_init(synclink_init); -module_exit(synclink_exit); - -/* - * usc_RTCmd() - * - * Issue a USC Receive/Transmit command to the - * Channel Command/Address Register (CCAR). - * - * Notes: - * - * The command is encoded in the most significant 5 bits <15..11> - * of the CCAR value. Bits <10..7> of the CCAR must be preserved - * and Bits <6..0> must be written as zeros. - * - * Arguments: - * - * info pointer to device information structure - * Cmd command mask (use symbolic macros) - * - * Return Value: - * - * None - */ -static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd ) -{ - /* output command to CCAR in bits <15..11> */ - /* preserve bits <10..7>, bits <6..0> must be zero */ - - outw( Cmd + info->loopback_bits, info->io_base + CCAR ); - - /* Read to flush write to CCAR */ - inw( info->io_base + CCAR ); - -} /* end of usc_RTCmd() */ - -/* - * usc_DmaCmd() - * - * Issue a DMA command to the DMA Command/Address Register (DCAR). - * - * Arguments: - * - * info pointer to device information structure - * Cmd DMA command mask (usc_DmaCmd_XX Macros) - * - * Return Value: - * - * None - */ -static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd ) -{ - /* write command mask to DCAR */ - outw( Cmd + info->mbre_bit, info->io_base ); - - /* Read to flush write to DCAR */ - inw( info->io_base ); - -} /* end of usc_DmaCmd() */ - -/* - * usc_OutDmaReg() - * - * Write a 16-bit value to a USC DMA register - * - * Arguments: - * - * info pointer to device info structure - * RegAddr register address (number) for write - * RegValue 16-bit value to write to register - * - * Return Value: - * - * None - * - */ -static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue ) -{ - /* Note: The DCAR is located at the adapter base address */ - /* Note: must preserve state of BIT8 in DCAR */ - - outw( RegAddr + info->mbre_bit, info->io_base ); - outw( RegValue, info->io_base ); - - /* Read to flush write to DCAR */ - inw( info->io_base ); - -} /* end of usc_OutDmaReg() */ - -/* - * usc_InDmaReg() - * - * Read a 16-bit value from a DMA register - * - * Arguments: - * - * info pointer to device info structure - * RegAddr register address (number) to read from - * - * Return Value: - * - * The 16-bit value read from register - * - */ -static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr ) -{ - /* Note: The DCAR is located at the adapter base address */ - /* Note: must preserve state of BIT8 in DCAR */ - - outw( RegAddr + info->mbre_bit, info->io_base ); - return inw( info->io_base ); - -} /* end of usc_InDmaReg() */ - -/* - * - * usc_OutReg() - * - * Write a 16-bit value to a USC serial channel register - * - * Arguments: - * - * info pointer to device info structure - * RegAddr register address (number) to write to - * RegValue 16-bit value to write to register - * - * Return Value: - * - * None - * - */ -static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue ) -{ - outw( RegAddr + info->loopback_bits, info->io_base + CCAR ); - outw( RegValue, info->io_base + CCAR ); - - /* Read to flush write to CCAR */ - inw( info->io_base + CCAR ); - -} /* end of usc_OutReg() */ - -/* - * usc_InReg() - * - * Reads a 16-bit value from a USC serial channel register - * - * Arguments: - * - * info pointer to device extension - * RegAddr register address (number) to read from - * - * Return Value: - * - * 16-bit value read from register - */ -static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr ) -{ - outw( RegAddr + info->loopback_bits, info->io_base + CCAR ); - return inw( info->io_base + CCAR ); - -} /* end of usc_InReg() */ - -/* usc_set_sdlc_mode() - * - * Set up the adapter for SDLC DMA communications. - * - * Arguments: info pointer to device instance data - * Return Value: NONE - */ -static void usc_set_sdlc_mode( struct mgsl_struct *info ) -{ - u16 RegValue; - bool PreSL1660; - - /* - * determine if the IUSC on the adapter is pre-SL1660. If - * not, take advantage of the UnderWait feature of more - * modern chips. If an underrun occurs and this bit is set, - * the transmitter will idle the programmed idle pattern - * until the driver has time to service the underrun. Otherwise, - * the dma controller may get the cycles previously requested - * and begin transmitting queued tx data. - */ - usc_OutReg(info,TMCR,0x1f); - RegValue=usc_InReg(info,TMDR); - PreSL1660 = (RegValue == IUSC_PRE_SL1660); - - if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) - { - /* - ** Channel Mode Register (CMR) - ** - ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun - ** <13> 0 0 = Transmit Disabled (initially) - ** <12> 0 1 = Consecutive Idles share common 0 - ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop - ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling - ** <3..0> 0110 Receiver Mode = HDLC/SDLC - ** - ** 1000 1110 0000 0110 = 0x8e06 - */ - RegValue = 0x8e06; - - /*-------------------------------------------------- - * ignore user options for UnderRun Actions and - * preambles - *--------------------------------------------------*/ - } - else - { - /* Channel mode Register (CMR) - * - * <15..14> 00 Tx Sub modes, Underrun Action - * <13> 0 1 = Send Preamble before opening flag - * <12> 0 1 = Consecutive Idles share common 0 - * <11..8> 0110 Transmitter mode = HDLC/SDLC - * <7..4> 0000 Rx Sub modes, addr/ctrl field handling - * <3..0> 0110 Receiver mode = HDLC/SDLC - * - * 0000 0110 0000 0110 = 0x0606 - */ - if (info->params.mode == MGSL_MODE_RAW) { - RegValue = 0x0001; /* Set Receive mode = external sync */ - - usc_OutReg( info, IOCR, /* Set IOCR DCD is RxSync Detect Input */ - (unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12)); - - /* - * TxSubMode: - * CMR <15> 0 Don't send CRC on Tx Underrun - * CMR <14> x undefined - * CMR <13> 0 Send preamble before openning sync - * CMR <12> 0 Send 8-bit syncs, 1=send Syncs per TxLength - * - * TxMode: - * CMR <11-8) 0100 MonoSync - * - * 0x00 0100 xxxx xxxx 04xx - */ - RegValue |= 0x0400; - } - else { - - RegValue = 0x0606; - - if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 ) - RegValue |= BIT14; - else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG ) - RegValue |= BIT15; - else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC ) - RegValue |= BIT15 | BIT14; - } - - if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE ) - RegValue |= BIT13; - } - - if ( info->params.mode == MGSL_MODE_HDLC && - (info->params.flags & HDLC_FLAG_SHARE_ZERO) ) - RegValue |= BIT12; - - if ( info->params.addr_filter != 0xff ) - { - /* set up receive address filtering */ - usc_OutReg( info, RSR, info->params.addr_filter ); - RegValue |= BIT4; - } - - usc_OutReg( info, CMR, RegValue ); - info->cmr_value = RegValue; - - /* Receiver mode Register (RMR) - * - * <15..13> 000 encoding - * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1) - * <10> 1 1 = Set CRC to all 1s (use for SDLC/HDLC) - * <9> 0 1 = Include Receive chars in CRC - * <8> 1 1 = Use Abort/PE bit as abort indicator - * <7..6> 00 Even parity - * <5> 0 parity disabled - * <4..2> 000 Receive Char Length = 8 bits - * <1..0> 00 Disable Receiver - * - * 0000 0101 0000 0000 = 0x0500 - */ - - RegValue = 0x0500; - - switch ( info->params.encoding ) { - case HDLC_ENCODING_NRZB: RegValue |= BIT13; break; - case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break; - case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 | BIT13; break; - case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break; - case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 | BIT13; break; - case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14; break; - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14 | BIT13; break; - } - - if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT ) - RegValue |= BIT9; - else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT ) - RegValue |= ( BIT12 | BIT10 | BIT9 ); - - usc_OutReg( info, RMR, RegValue ); - - /* Set the Receive count Limit Register (RCLR) to 0xffff. */ - /* When an opening flag of an SDLC frame is recognized the */ - /* Receive Character count (RCC) is loaded with the value in */ - /* RCLR. The RCC is decremented for each received byte. The */ - /* value of RCC is stored after the closing flag of the frame */ - /* allowing the frame size to be computed. */ - - usc_OutReg( info, RCLR, RCLRVALUE ); - - usc_RCmd( info, RCmd_SelectRicrdma_level ); - - /* Receive Interrupt Control Register (RICR) - * - * <15..8> ? RxFIFO DMA Request Level - * <7> 0 Exited Hunt IA (Interrupt Arm) - * <6> 0 Idle Received IA - * <5> 0 Break/Abort IA - * <4> 0 Rx Bound IA - * <3> 1 Queued status reflects oldest 2 bytes in FIFO - * <2> 0 Abort/PE IA - * <1> 1 Rx Overrun IA - * <0> 0 Select TC0 value for readback - * - * 0000 0000 0000 1000 = 0x000a - */ - - /* Carry over the Exit Hunt and Idle Received bits */ - /* in case they have been armed by usc_ArmEvents. */ - - RegValue = usc_InReg( info, RICR ) & 0xc0; - - usc_OutReg( info, RICR, (u16)(0x030a | RegValue) ); - - /* Unlatch all Rx status bits and clear Rx status IRQ Pending */ - - usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); - - /* Transmit mode Register (TMR) - * - * <15..13> 000 encoding - * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1) - * <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC) - * <9> 0 1 = Tx CRC Enabled - * <8> 0 1 = Append CRC to end of transmit frame - * <7..6> 00 Transmit parity Even - * <5> 0 Transmit parity Disabled - * <4..2> 000 Tx Char Length = 8 bits - * <1..0> 00 Disable Transmitter - * - * 0000 0100 0000 0000 = 0x0400 - */ - - RegValue = 0x0400; - - switch ( info->params.encoding ) { - case HDLC_ENCODING_NRZB: RegValue |= BIT13; break; - case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break; - case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 | BIT13; break; - case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break; - case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 | BIT13; break; - case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14; break; - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14 | BIT13; break; - } - - if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT ) - RegValue |= BIT9 | BIT8; - else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT ) - RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8); - - usc_OutReg( info, TMR, RegValue ); - - usc_set_txidle( info ); - - - usc_TCmd( info, TCmd_SelectTicrdma_level ); - - /* Transmit Interrupt Control Register (TICR) - * - * <15..8> ? Transmit FIFO DMA Level - * <7> 0 Present IA (Interrupt Arm) - * <6> 0 Idle Sent IA - * <5> 1 Abort Sent IA - * <4> 1 EOF/EOM Sent IA - * <3> 0 CRC Sent IA - * <2> 1 1 = Wait for SW Trigger to Start Frame - * <1> 1 Tx Underrun IA - * <0> 0 TC0 constant on read back - * - * 0000 0000 0011 0110 = 0x0036 - */ - - usc_OutReg( info, TICR, 0x0736 ); - - usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); - - /* - ** Transmit Command/Status Register (TCSR) - ** - ** <15..12> 0000 TCmd - ** <11> 0/1 UnderWait - ** <10..08> 000 TxIdle - ** <7> x PreSent - ** <6> x IdleSent - ** <5> x AbortSent - ** <4> x EOF/EOM Sent - ** <3> x CRC Sent - ** <2> x All Sent - ** <1> x TxUnder - ** <0> x TxEmpty - ** - ** 0000 0000 0000 0000 = 0x0000 - */ - info->tcsr_value = 0; - - if ( !PreSL1660 ) - info->tcsr_value |= TCSR_UNDERWAIT; - - usc_OutReg( info, TCSR, info->tcsr_value ); - - /* Clock mode Control Register (CMCR) - * - * <15..14> 00 counter 1 Source = Disabled - * <13..12> 00 counter 0 Source = Disabled - * <11..10> 11 BRG1 Input is TxC Pin - * <9..8> 11 BRG0 Input is TxC Pin - * <7..6> 01 DPLL Input is BRG1 Output - * <5..3> XXX TxCLK comes from Port 0 - * <2..0> XXX RxCLK comes from Port 1 - * - * 0000 1111 0111 0111 = 0x0f77 - */ - - RegValue = 0x0f40; - - if ( info->params.flags & HDLC_FLAG_RXC_DPLL ) - RegValue |= 0x0003; /* RxCLK from DPLL */ - else if ( info->params.flags & HDLC_FLAG_RXC_BRG ) - RegValue |= 0x0004; /* RxCLK from BRG0 */ - else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN) - RegValue |= 0x0006; /* RxCLK from TXC Input */ - else - RegValue |= 0x0007; /* RxCLK from Port1 */ - - if ( info->params.flags & HDLC_FLAG_TXC_DPLL ) - RegValue |= 0x0018; /* TxCLK from DPLL */ - else if ( info->params.flags & HDLC_FLAG_TXC_BRG ) - RegValue |= 0x0020; /* TxCLK from BRG0 */ - else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN) - RegValue |= 0x0038; /* RxCLK from TXC Input */ - else - RegValue |= 0x0030; /* TxCLK from Port0 */ - - usc_OutReg( info, CMCR, RegValue ); - - - /* Hardware Configuration Register (HCR) - * - * <15..14> 00 CTR0 Divisor:00=32,01=16,10=8,11=4 - * <13> 0 CTR1DSel:0=CTR0Div determines CTR0Div - * <12> 0 CVOK:0=report code violation in biphase - * <11..10> 00 DPLL Divisor:00=32,01=16,10=8,11=4 - * <9..8> XX DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level - * <7..6> 00 reserved - * <5> 0 BRG1 mode:0=continuous,1=single cycle - * <4> X BRG1 Enable - * <3..2> 00 reserved - * <1> 0 BRG0 mode:0=continuous,1=single cycle - * <0> 0 BRG0 Enable - */ - - RegValue = 0x0000; - - if ( info->params.flags & (HDLC_FLAG_RXC_DPLL | HDLC_FLAG_TXC_DPLL) ) { - u32 XtalSpeed; - u32 DpllDivisor; - u16 Tc; - - /* DPLL is enabled. Use BRG1 to provide continuous reference clock */ - /* for DPLL. DPLL mode in HCR is dependent on the encoding used. */ - - XtalSpeed = 11059200; - - if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) { - DpllDivisor = 16; - RegValue |= BIT10; - } - else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) { - DpllDivisor = 8; - RegValue |= BIT11; - } - else - DpllDivisor = 32; - - /* Tc = (Xtal/Speed) - 1 */ - /* If twice the remainder of (Xtal/Speed) is greater than Speed */ - /* then rounding up gives a more precise time constant. Instead */ - /* of rounding up and then subtracting 1 we just don't subtract */ - /* the one in this case. */ - - /*-------------------------------------------------- - * ejz: for DPLL mode, application should use the - * same clock speed as the partner system, even - * though clocking is derived from the input RxData. - * In case the user uses a 0 for the clock speed, - * default to 0xffffffff and don't try to divide by - * zero - *--------------------------------------------------*/ - if ( info->params.clock_speed ) - { - Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed); - if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2) - / info->params.clock_speed) ) - Tc--; - } - else - Tc = -1; - - - /* Write 16-bit Time Constant for BRG1 */ - usc_OutReg( info, TC1R, Tc ); - - RegValue |= BIT4; /* enable BRG1 */ - - switch ( info->params.encoding ) { - case HDLC_ENCODING_NRZ: - case HDLC_ENCODING_NRZB: - case HDLC_ENCODING_NRZI_MARK: - case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break; - case HDLC_ENCODING_BIPHASE_MARK: - case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break; - case HDLC_ENCODING_BIPHASE_LEVEL: - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 | BIT8; break; - } - } - - usc_OutReg( info, HCR, RegValue ); - - - /* Channel Control/status Register (CCSR) - * - * <15> X RCC FIFO Overflow status (RO) - * <14> X RCC FIFO Not Empty status (RO) - * <13> 0 1 = Clear RCC FIFO (WO) - * <12> X DPLL Sync (RW) - * <11> X DPLL 2 Missed Clocks status (RO) - * <10> X DPLL 1 Missed Clock status (RO) - * <9..8> 00 DPLL Resync on rising and falling edges (RW) - * <7> X SDLC Loop On status (RO) - * <6> X SDLC Loop Send status (RO) - * <5> 1 Bypass counters for TxClk and RxClk (RW) - * <4..2> 000 Last Char of SDLC frame has 8 bits (RW) - * <1..0> 00 reserved - * - * 0000 0000 0010 0000 = 0x0020 - */ - - usc_OutReg( info, CCSR, 0x1020 ); - - - if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) { - usc_OutReg( info, SICR, - (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) ); - } - - - /* enable Master Interrupt Enable bit (MIE) */ - usc_EnableMasterIrqBit( info ); - - usc_ClearIrqPendingBits( info, RECEIVE_STATUS | RECEIVE_DATA | - TRANSMIT_STATUS | TRANSMIT_DATA | MISC); - - /* arm RCC underflow interrupt */ - usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3)); - usc_EnableInterrupts(info, MISC); - - info->mbre_bit = 0; - outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */ - usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */ - info->mbre_bit = BIT8; - outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */ - - /* DMA Control Register (DCR) - * - * <15..14> 10 Priority mode = Alternating Tx/Rx - * 01 Rx has priority - * 00 Tx has priority - * - * <13> 1 Enable Priority Preempt per DCR<15..14> - * (WARNING DCR<11..10> must be 00 when this is 1) - * 0 Choose activate channel per DCR<11..10> - * - * <12> 0 Little Endian for Array/List - * <11..10> 00 Both Channels can use each bus grant - * <9..6> 0000 reserved - * <5> 0 7 CLK - Minimum Bus Re-request Interval - * <4> 0 1 = drive D/C and S/D pins - * <3> 1 1 = Add one wait state to all DMA cycles. - * <2> 0 1 = Strobe /UAS on every transfer. - * <1..0> 11 Addr incrementing only affects LS24 bits - * - * 0110 0000 0000 1011 = 0x600b - */ - - /* PCI adapter does not need DMA wait state */ - usc_OutDmaReg( info, DCR, 0xa00b ); - - /* Receive DMA mode Register (RDMR) - * - * <15..14> 11 DMA mode = Linked List Buffer mode - * <13> 1 RSBinA/L = store Rx status Block in Arrary/List entry - * <12> 1 Clear count of List Entry after fetching - * <11..10> 00 Address mode = Increment - * <9> 1 Terminate Buffer on RxBound - * <8> 0 Bus Width = 16bits - * <7..0> ? status Bits (write as 0s) - * - * 1111 0010 0000 0000 = 0xf200 - */ - - usc_OutDmaReg( info, RDMR, 0xf200 ); - - - /* Transmit DMA mode Register (TDMR) - * - * <15..14> 11 DMA mode = Linked List Buffer mode - * <13> 1 TCBinA/L = fetch Tx Control Block from List entry - * <12> 1 Clear count of List Entry after fetching - * <11..10> 00 Address mode = Increment - * <9> 1 Terminate Buffer on end of frame - * <8> 0 Bus Width = 16bits - * <7..0> ? status Bits (Read Only so write as 0) - * - * 1111 0010 0000 0000 = 0xf200 - */ - - usc_OutDmaReg( info, TDMR, 0xf200 ); - - - /* DMA Interrupt Control Register (DICR) - * - * <15> 1 DMA Interrupt Enable - * <14> 0 1 = Disable IEO from USC - * <13> 0 1 = Don't provide vector during IntAck - * <12> 1 1 = Include status in Vector - * <10..2> 0 reserved, Must be 0s - * <1> 0 1 = Rx DMA Interrupt Enabled - * <0> 0 1 = Tx DMA Interrupt Enabled - * - * 1001 0000 0000 0000 = 0x9000 - */ - - usc_OutDmaReg( info, DICR, 0x9000 ); - - usc_InDmaReg( info, RDMR ); /* clear pending receive DMA IRQ bits */ - usc_InDmaReg( info, TDMR ); /* clear pending transmit DMA IRQ bits */ - usc_OutDmaReg( info, CDIR, 0x0303 ); /* clear IUS and Pending for Tx and Rx */ - - /* Channel Control Register (CCR) - * - * <15..14> 10 Use 32-bit Tx Control Blocks (TCBs) - * <13> 0 Trigger Tx on SW Command Disabled - * <12> 0 Flag Preamble Disabled - * <11..10> 00 Preamble Length - * <9..8> 00 Preamble Pattern - * <7..6> 10 Use 32-bit Rx status Blocks (RSBs) - * <5> 0 Trigger Rx on SW Command Disabled - * <4..0> 0 reserved - * - * 1000 0000 1000 0000 = 0x8080 - */ - - RegValue = 0x8080; - - switch ( info->params.preamble_length ) { - case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break; - case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break; - case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 | BIT10; break; - } - - switch ( info->params.preamble ) { - case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 | BIT12; break; - case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break; - case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break; - case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 | BIT8; break; - } - - usc_OutReg( info, CCR, RegValue ); - - - /* - * Burst/Dwell Control Register - * - * <15..8> 0x20 Maximum number of transfers per bus grant - * <7..0> 0x00 Maximum number of clock cycles per bus grant - */ - - /* don't limit bus occupancy on PCI adapter */ - usc_OutDmaReg( info, BDCR, 0x0000 ); - - usc_stop_transmitter(info); - usc_stop_receiver(info); - -} /* end of usc_set_sdlc_mode() */ - -/* usc_enable_loopback() - * - * Set the 16C32 for internal loopback mode. - * The TxCLK and RxCLK signals are generated from the BRG0 and - * the TxD is looped back to the RxD internally. - * - * Arguments: info pointer to device instance data - * enable 1 = enable loopback, 0 = disable - * Return Value: None - */ -static void usc_enable_loopback(struct mgsl_struct *info, int enable) -{ - if (enable) { - /* blank external TXD output */ - usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7 | BIT6)); - - /* Clock mode Control Register (CMCR) - * - * <15..14> 00 counter 1 Disabled - * <13..12> 00 counter 0 Disabled - * <11..10> 11 BRG1 Input is TxC Pin - * <9..8> 11 BRG0 Input is TxC Pin - * <7..6> 01 DPLL Input is BRG1 Output - * <5..3> 100 TxCLK comes from BRG0 - * <2..0> 100 RxCLK comes from BRG0 - * - * 0000 1111 0110 0100 = 0x0f64 - */ - - usc_OutReg( info, CMCR, 0x0f64 ); - - /* Write 16-bit Time Constant for BRG0 */ - /* use clock speed if available, otherwise use 8 for diagnostics */ - if (info->params.clock_speed) { - usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1)); - } else - usc_OutReg(info, TC0R, (u16)8); - - /* Hardware Configuration Register (HCR) Clear Bit 1, BRG0 - mode = Continuous Set Bit 0 to enable BRG0. */ - usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); - - /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ - usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004)); - - /* set Internal Data loopback mode */ - info->loopback_bits = 0x300; - outw( 0x0300, info->io_base + CCAR ); - } else { - /* enable external TXD output */ - usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7 | BIT6)); - - /* clear Internal Data loopback mode */ - info->loopback_bits = 0; - outw( 0,info->io_base + CCAR ); - } - -} /* end of usc_enable_loopback() */ - -/* usc_enable_aux_clock() - * - * Enabled the AUX clock output at the specified frequency. - * - * Arguments: - * - * info pointer to device extension - * data_rate data rate of clock in bits per second - * A data rate of 0 disables the AUX clock. - * - * Return Value: None - */ -static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate ) -{ - u32 XtalSpeed; - u16 Tc; - - if ( data_rate ) { - XtalSpeed = 11059200; - - - /* Tc = (Xtal/Speed) - 1 */ - /* If twice the remainder of (Xtal/Speed) is greater than Speed */ - /* then rounding up gives a more precise time constant. Instead */ - /* of rounding up and then subtracting 1 we just don't subtract */ - /* the one in this case. */ - - - Tc = (u16)(XtalSpeed/data_rate); - if ( !(((XtalSpeed % data_rate) * 2) / data_rate) ) - Tc--; - - /* Write 16-bit Time Constant for BRG0 */ - usc_OutReg( info, TC0R, Tc ); - - /* - * Hardware Configuration Register (HCR) - * Clear Bit 1, BRG0 mode = Continuous - * Set Bit 0 to enable BRG0. - */ - - usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); - - /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ - usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) ); - } else { - /* data rate == 0 so turn off BRG0 */ - usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) ); - } - -} /* end of usc_enable_aux_clock() */ - -/* - * - * usc_process_rxoverrun_sync() - * - * This function processes a receive overrun by resetting the - * receive DMA buffers and issuing a Purge Rx FIFO command - * to allow the receiver to continue receiving. - * - * Arguments: - * - * info pointer to device extension - * - * Return Value: None - */ -static void usc_process_rxoverrun_sync( struct mgsl_struct *info ) -{ - int start_index; - int end_index; - int frame_start_index; - bool start_of_frame_found = false; - bool end_of_frame_found = false; - bool reprogram_dma = false; - - DMABUFFERENTRY *buffer_list = info->rx_buffer_list; - u32 phys_addr; - - usc_DmaCmd( info, DmaCmd_PauseRxChannel ); - usc_RCmd( info, RCmd_EnterHuntmode ); - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - - /* CurrentRxBuffer points to the 1st buffer of the next */ - /* possibly available receive frame. */ - - frame_start_index = start_index = end_index = info->current_rx_buffer; - - /* Search for an unfinished string of buffers. This means */ - /* that a receive frame started (at least one buffer with */ - /* count set to zero) but there is no terminiting buffer */ - /* (status set to non-zero). */ - - while( !buffer_list[end_index].count ) - { - /* Count field has been reset to zero by 16C32. */ - /* This buffer is currently in use. */ - - if ( !start_of_frame_found ) - { - start_of_frame_found = true; - frame_start_index = end_index; - end_of_frame_found = false; - } - - if ( buffer_list[end_index].status ) - { - /* Status field has been set by 16C32. */ - /* This is the last buffer of a received frame. */ - - /* We want to leave the buffers for this frame intact. */ - /* Move on to next possible frame. */ - - start_of_frame_found = false; - end_of_frame_found = true; - } - - /* advance to next buffer entry in linked list */ - end_index++; - if ( end_index == info->rx_buffer_count ) - end_index = 0; - - if ( start_index == end_index ) - { - /* The entire list has been searched with all Counts == 0 and */ - /* all Status == 0. The receive buffers are */ - /* completely screwed, reset all receive buffers! */ - mgsl_reset_rx_dma_buffers( info ); - frame_start_index = 0; - start_of_frame_found = false; - reprogram_dma = true; - break; - } - } - - if ( start_of_frame_found && !end_of_frame_found ) - { - /* There is an unfinished string of receive DMA buffers */ - /* as a result of the receiver overrun. */ - - /* Reset the buffers for the unfinished frame */ - /* and reprogram the receive DMA controller to start */ - /* at the 1st buffer of unfinished frame. */ - - start_index = frame_start_index; - - do - { - *((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE; - - /* Adjust index for wrap around. */ - if ( start_index == info->rx_buffer_count ) - start_index = 0; - - } while( start_index != end_index ); - - reprogram_dma = true; - } - - if ( reprogram_dma ) - { - usc_UnlatchRxstatusBits(info,RXSTATUS_ALL); - usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS); - usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS); - - usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); - - /* This empties the receive FIFO and loads the RCC with RCLR */ - usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); - - /* program 16C32 with physical address of 1st DMA buffer entry */ - phys_addr = info->rx_buffer_list[frame_start_index].phys_entry; - usc_OutDmaReg( info, NRARL, (u16)phys_addr ); - usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) ); - - usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS ); - usc_EnableInterrupts( info, RECEIVE_STATUS ); - - /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */ - /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */ - - usc_OutDmaReg( info, RDIAR, BIT3 | BIT2 ); - usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) ); - usc_DmaCmd( info, DmaCmd_InitRxChannel ); - if ( info->params.flags & HDLC_FLAG_AUTO_DCD ) - usc_EnableReceiver(info,ENABLE_AUTO_DCD); - else - usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); - } - else - { - /* This empties the receive FIFO and loads the RCC with RCLR */ - usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - } - -} /* end of usc_process_rxoverrun_sync() */ - -/* usc_stop_receiver() - * - * Disable USC receiver - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_stop_receiver( struct mgsl_struct *info ) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):usc_stop_receiver(%s)\n", - __FILE__,__LINE__, info->device_name ); - - /* Disable receive DMA channel. */ - /* This also disables receive DMA channel interrupts */ - usc_DmaCmd( info, DmaCmd_ResetRxChannel ); - - usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS ); - usc_DisableInterrupts( info, RECEIVE_DATA | RECEIVE_STATUS ); - - usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); - - /* This empties the receive FIFO and loads the RCC with RCLR */ - usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - - info->rx_enabled = false; - info->rx_overflow = false; - info->rx_rcc_underrun = false; - -} /* end of stop_receiver() */ - -/* usc_start_receiver() - * - * Enable the USC receiver - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_start_receiver( struct mgsl_struct *info ) -{ - u32 phys_addr; - - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):usc_start_receiver(%s)\n", - __FILE__,__LINE__, info->device_name ); - - mgsl_reset_rx_dma_buffers( info ); - usc_stop_receiver( info ); - - usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - - if ( info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW ) { - /* DMA mode Transfers */ - /* Program the DMA controller. */ - /* Enable the DMA controller end of buffer interrupt. */ - - /* program 16C32 with physical address of 1st DMA buffer entry */ - phys_addr = info->rx_buffer_list[0].phys_entry; - usc_OutDmaReg( info, NRARL, (u16)phys_addr ); - usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) ); - - usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS ); - usc_EnableInterrupts( info, RECEIVE_STATUS ); - - /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */ - /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */ - - usc_OutDmaReg( info, RDIAR, BIT3 | BIT2 ); - usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) ); - usc_DmaCmd( info, DmaCmd_InitRxChannel ); - if ( info->params.flags & HDLC_FLAG_AUTO_DCD ) - usc_EnableReceiver(info,ENABLE_AUTO_DCD); - else - usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); - } else { - usc_UnlatchRxstatusBits(info, RXSTATUS_ALL); - usc_ClearIrqPendingBits(info, RECEIVE_DATA | RECEIVE_STATUS); - usc_EnableInterrupts(info, RECEIVE_DATA); - - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - usc_RCmd( info, RCmd_EnterHuntmode ); - - usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); - } - - usc_OutReg( info, CCSR, 0x1020 ); - - info->rx_enabled = true; - -} /* end of usc_start_receiver() */ - -/* usc_start_transmitter() - * - * Enable the USC transmitter and send a transmit frame if - * one is loaded in the DMA buffers. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_start_transmitter( struct mgsl_struct *info ) -{ - u32 phys_addr; - unsigned int FrameSize; - - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):usc_start_transmitter(%s)\n", - __FILE__,__LINE__, info->device_name ); - - if ( info->xmit_cnt ) { - - /* If auto RTS enabled and RTS is inactive, then assert */ - /* RTS and set a flag indicating that the driver should */ - /* negate RTS when the transmission completes. */ - - info->drop_rts_on_tx_done = false; - - if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) { - usc_get_serial_signals( info ); - if ( !(info->serial_signals & SerialSignal_RTS) ) { - info->serial_signals |= SerialSignal_RTS; - usc_set_serial_signals( info ); - info->drop_rts_on_tx_done = true; - } - } - - - if ( info->params.mode == MGSL_MODE_ASYNC ) { - if ( !info->tx_active ) { - usc_UnlatchTxstatusBits(info, TXSTATUS_ALL); - usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA); - usc_EnableInterrupts(info, TRANSMIT_DATA); - usc_load_txfifo(info); - } - } else { - /* Disable transmit DMA controller while programming. */ - usc_DmaCmd( info, DmaCmd_ResetTxChannel ); - - /* Transmit DMA buffer is loaded, so program USC */ - /* to send the frame contained in the buffers. */ - - FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc; - - /* if operating in Raw sync mode, reset the rcc component - * of the tx dma buffer entry, otherwise, the serial controller - * will send a closing sync char after this count. - */ - if ( info->params.mode == MGSL_MODE_RAW ) - info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0; - - /* Program the Transmit Character Length Register (TCLR) */ - /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ - usc_OutReg( info, TCLR, (u16)FrameSize ); - - usc_RTCmd( info, RTCmd_PurgeTxFifo ); - - /* Program the address of the 1st DMA Buffer Entry in linked list */ - phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry; - usc_OutDmaReg( info, NTARL, (u16)phys_addr ); - usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) ); - - usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); - usc_EnableInterrupts( info, TRANSMIT_STATUS ); - - if ( info->params.mode == MGSL_MODE_RAW && - info->num_tx_dma_buffers > 1 ) { - /* When running external sync mode, attempt to 'stream' transmit */ - /* by filling tx dma buffers as they become available. To do this */ - /* we need to enable Tx DMA EOB Status interrupts : */ - /* */ - /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */ - /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */ - - usc_OutDmaReg( info, TDIAR, BIT2|BIT3 ); - usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) ); - } - - /* Initialize Transmit DMA Channel */ - usc_DmaCmd( info, DmaCmd_InitTxChannel ); - - usc_TCmd( info, TCmd_SendFrame ); - - mod_timer(&info->tx_timer, jiffies + - msecs_to_jiffies(5000)); - } - info->tx_active = true; - } - - if ( !info->tx_enabled ) { - info->tx_enabled = true; - if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) - usc_EnableTransmitter(info,ENABLE_AUTO_CTS); - else - usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL); - } - -} /* end of usc_start_transmitter() */ - -/* usc_stop_transmitter() - * - * Stops the transmitter and DMA - * - * Arguments: info pointer to device isntance data - * Return Value: None - */ -static void usc_stop_transmitter( struct mgsl_struct *info ) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):usc_stop_transmitter(%s)\n", - __FILE__,__LINE__, info->device_name ); - - del_timer(&info->tx_timer); - - usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA ); - usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA ); - - usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL); - usc_DmaCmd( info, DmaCmd_ResetTxChannel ); - usc_RTCmd( info, RTCmd_PurgeTxFifo ); - - info->tx_enabled = false; - info->tx_active = false; - -} /* end of usc_stop_transmitter() */ - -/* usc_load_txfifo() - * - * Fill the transmit FIFO until the FIFO is full or - * there is no more data to load. - * - * Arguments: info pointer to device extension (instance data) - * Return Value: None - */ -static void usc_load_txfifo( struct mgsl_struct *info ) -{ - int Fifocount; - u8 TwoBytes[2]; - - if ( !info->xmit_cnt && !info->x_char ) - return; - - /* Select transmit FIFO status readback in TICR */ - usc_TCmd( info, TCmd_SelectTicrTxFifostatus ); - - /* load the Transmit FIFO until FIFOs full or all data sent */ - - while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) { - /* there is more space in the transmit FIFO and */ - /* there is more data in transmit buffer */ - - if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) { - /* write a 16-bit word from transmit buffer to 16C32 */ - - TwoBytes[0] = info->xmit_buf[info->xmit_tail++]; - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - TwoBytes[1] = info->xmit_buf[info->xmit_tail++]; - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - - outw( *((u16 *)TwoBytes), info->io_base + DATAREG); - - info->xmit_cnt -= 2; - info->icount.tx += 2; - } else { - /* only 1 byte left to transmit or 1 FIFO slot left */ - - outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY), - info->io_base + CCAR ); - - if (info->x_char) { - /* transmit pending high priority char */ - outw( info->x_char,info->io_base + CCAR ); - info->x_char = 0; - } else { - outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR ); - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt--; - } - info->icount.tx++; - } - } - -} /* end of usc_load_txfifo() */ - -/* usc_reset() - * - * Reset the adapter to a known state and prepare it for further use. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_reset( struct mgsl_struct *info ) -{ - int i; - u32 readval; - - /* Set BIT30 of Misc Control Register */ - /* (Local Control Register 0x50) to force reset of USC. */ - - volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50); - u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28); - - info->misc_ctrl_value |= BIT30; - *MiscCtrl = info->misc_ctrl_value; - - /* - * Force at least 170ns delay before clearing reset bit. Each read from - * LCR takes at least 30ns so 10 times for 300ns to be safe. - */ - for(i=0;i<10;i++) - readval = *MiscCtrl; - - info->misc_ctrl_value &= ~BIT30; - *MiscCtrl = info->misc_ctrl_value; - - *LCR0BRDR = BUS_DESCRIPTOR( - 1, // Write Strobe Hold (0-3) - 2, // Write Strobe Delay (0-3) - 2, // Read Strobe Delay (0-3) - 0, // NWDD (Write data-data) (0-3) - 4, // NWAD (Write Addr-data) (0-31) - 0, // NXDA (Read/Write Data-Addr) (0-3) - 0, // NRDD (Read Data-Data) (0-3) - 5 // NRAD (Read Addr-Data) (0-31) - ); - - info->mbre_bit = 0; - info->loopback_bits = 0; - info->usc_idle_mode = 0; - - /* - * Program the Bus Configuration Register (BCR) - * - * <15> 0 Don't use separate address - * <14..6> 0 reserved - * <5..4> 00 IAckmode = Default, don't care - * <3> 1 Bus Request Totem Pole output - * <2> 1 Use 16 Bit data bus - * <1> 0 IRQ Totem Pole output - * <0> 0 Don't Shift Right Addr - * - * 0000 0000 0000 1100 = 0x000c - * - * By writing to io_base + SDPIN the Wait/Ack pin is - * programmed to work as a Wait pin. - */ - - outw( 0x000c,info->io_base + SDPIN ); - - - outw( 0,info->io_base ); - outw( 0,info->io_base + CCAR ); - - /* select little endian byte ordering */ - usc_RTCmd( info, RTCmd_SelectLittleEndian ); - - - /* Port Control Register (PCR) - * - * <15..14> 11 Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled) - * <13..12> 11 Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled) - * <11..10> 00 Port 5 is Input (No Connect, Don't Care) - * <9..8> 00 Port 4 is Input (No Connect, Don't Care) - * <7..6> 11 Port 3 is Output (~RTS, Bit 6 : 0 = Enabled ) - * <5..4> 11 Port 2 is Output (~DTR, Bit 4 : 0 = Enabled ) - * <3..2> 01 Port 1 is Input (Dedicated RxC) - * <1..0> 01 Port 0 is Input (Dedicated TxC) - * - * 1111 0000 1111 0101 = 0xf0f5 - */ - - usc_OutReg( info, PCR, 0xf0f5 ); - - - /* - * Input/Output Control Register - * - * <15..14> 00 CTS is active low input - * <13..12> 00 DCD is active low input - * <11..10> 00 TxREQ pin is input (DSR) - * <9..8> 00 RxREQ pin is input (RI) - * <7..6> 00 TxD is output (Transmit Data) - * <5..3> 000 TxC Pin in Input (14.7456MHz Clock) - * <2..0> 100 RxC is Output (drive with BRG0) - * - * 0000 0000 0000 0100 = 0x0004 - */ - - usc_OutReg( info, IOCR, 0x0004 ); - -} /* end of usc_reset() */ - -/* usc_set_async_mode() - * - * Program adapter for asynchronous communications. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_set_async_mode( struct mgsl_struct *info ) -{ - u16 RegValue; - - /* disable interrupts while programming USC */ - usc_DisableMasterIrqBit( info ); - - outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */ - usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */ - - usc_loopback_frame( info ); - - /* Channel mode Register (CMR) - * - * <15..14> 00 Tx Sub modes, 00 = 1 Stop Bit - * <13..12> 00 00 = 16X Clock - * <11..8> 0000 Transmitter mode = Asynchronous - * <7..6> 00 reserved? - * <5..4> 00 Rx Sub modes, 00 = 16X Clock - * <3..0> 0000 Receiver mode = Asynchronous - * - * 0000 0000 0000 0000 = 0x0 - */ - - RegValue = 0; - if ( info->params.stop_bits != 1 ) - RegValue |= BIT14; - usc_OutReg( info, CMR, RegValue ); - - - /* Receiver mode Register (RMR) - * - * <15..13> 000 encoding = None - * <12..08> 00000 reserved (Sync Only) - * <7..6> 00 Even parity - * <5> 0 parity disabled - * <4..2> 000 Receive Char Length = 8 bits - * <1..0> 00 Disable Receiver - * - * 0000 0000 0000 0000 = 0x0 - */ - - RegValue = 0; - - if ( info->params.data_bits != 8 ) - RegValue |= BIT4 | BIT3 | BIT2; - - if ( info->params.parity != ASYNC_PARITY_NONE ) { - RegValue |= BIT5; - if ( info->params.parity != ASYNC_PARITY_ODD ) - RegValue |= BIT6; - } - - usc_OutReg( info, RMR, RegValue ); - - - /* Set IRQ trigger level */ - - usc_RCmd( info, RCmd_SelectRicrIntLevel ); - - - /* Receive Interrupt Control Register (RICR) - * - * <15..8> ? RxFIFO IRQ Request Level - * - * Note: For async mode the receive FIFO level must be set - * to 0 to avoid the situation where the FIFO contains fewer bytes - * than the trigger level and no more data is expected. - * - * <7> 0 Exited Hunt IA (Interrupt Arm) - * <6> 0 Idle Received IA - * <5> 0 Break/Abort IA - * <4> 0 Rx Bound IA - * <3> 0 Queued status reflects oldest byte in FIFO - * <2> 0 Abort/PE IA - * <1> 0 Rx Overrun IA - * <0> 0 Select TC0 value for readback - * - * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB) - */ - - usc_OutReg( info, RICR, 0x0000 ); - - usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); - - - /* Transmit mode Register (TMR) - * - * <15..13> 000 encoding = None - * <12..08> 00000 reserved (Sync Only) - * <7..6> 00 Transmit parity Even - * <5> 0 Transmit parity Disabled - * <4..2> 000 Tx Char Length = 8 bits - * <1..0> 00 Disable Transmitter - * - * 0000 0000 0000 0000 = 0x0 - */ - - RegValue = 0; - - if ( info->params.data_bits != 8 ) - RegValue |= BIT4 | BIT3 | BIT2; - - if ( info->params.parity != ASYNC_PARITY_NONE ) { - RegValue |= BIT5; - if ( info->params.parity != ASYNC_PARITY_ODD ) - RegValue |= BIT6; - } - - usc_OutReg( info, TMR, RegValue ); - - usc_set_txidle( info ); - - - /* Set IRQ trigger level */ - - usc_TCmd( info, TCmd_SelectTicrIntLevel ); - - - /* Transmit Interrupt Control Register (TICR) - * - * <15..8> ? Transmit FIFO IRQ Level - * <7> 0 Present IA (Interrupt Arm) - * <6> 1 Idle Sent IA - * <5> 0 Abort Sent IA - * <4> 0 EOF/EOM Sent IA - * <3> 0 CRC Sent IA - * <2> 0 1 = Wait for SW Trigger to Start Frame - * <1> 0 Tx Underrun IA - * <0> 0 TC0 constant on read back - * - * 0000 0000 0100 0000 = 0x0040 - */ - - usc_OutReg( info, TICR, 0x1f40 ); - - usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); - usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); - - usc_enable_async_clock( info, info->params.data_rate ); - - - /* Channel Control/status Register (CCSR) - * - * <15> X RCC FIFO Overflow status (RO) - * <14> X RCC FIFO Not Empty status (RO) - * <13> 0 1 = Clear RCC FIFO (WO) - * <12> X DPLL in Sync status (RO) - * <11> X DPLL 2 Missed Clocks status (RO) - * <10> X DPLL 1 Missed Clock status (RO) - * <9..8> 00 DPLL Resync on rising and falling edges (RW) - * <7> X SDLC Loop On status (RO) - * <6> X SDLC Loop Send status (RO) - * <5> 1 Bypass counters for TxClk and RxClk (RW) - * <4..2> 000 Last Char of SDLC frame has 8 bits (RW) - * <1..0> 00 reserved - * - * 0000 0000 0010 0000 = 0x0020 - */ - - usc_OutReg( info, CCSR, 0x0020 ); - - usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA + - RECEIVE_DATA + RECEIVE_STATUS ); - - usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA + - RECEIVE_DATA + RECEIVE_STATUS ); - - usc_EnableMasterIrqBit( info ); - - if (info->params.loopback) { - info->loopback_bits = 0x300; - outw(0x0300, info->io_base + CCAR); - } - -} /* end of usc_set_async_mode() */ - -/* usc_loopback_frame() - * - * Loop back a small (2 byte) dummy SDLC frame. - * Interrupts and DMA are NOT used. The purpose of this is to - * clear any 'stale' status info left over from running in async mode. - * - * The 16C32 shows the strange behaviour of marking the 1st - * received SDLC frame with a CRC error even when there is no - * CRC error. To get around this a small dummy from of 2 bytes - * is looped back when switching from async to sync mode. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_loopback_frame( struct mgsl_struct *info ) -{ - int i; - unsigned long oldmode = info->params.mode; - - info->params.mode = MGSL_MODE_HDLC; - - usc_DisableMasterIrqBit( info ); - - usc_set_sdlc_mode( info ); - usc_enable_loopback( info, 1 ); - - /* Write 16-bit Time Constant for BRG0 */ - usc_OutReg( info, TC0R, 0 ); - - /* Channel Control Register (CCR) - * - * <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs) - * <13> 0 Trigger Tx on SW Command Disabled - * <12> 0 Flag Preamble Disabled - * <11..10> 00 Preamble Length = 8-Bits - * <9..8> 01 Preamble Pattern = flags - * <7..6> 10 Don't use 32-bit Rx status Blocks (RSBs) - * <5> 0 Trigger Rx on SW Command Disabled - * <4..0> 0 reserved - * - * 0000 0001 0000 0000 = 0x0100 - */ - - usc_OutReg( info, CCR, 0x0100 ); - - /* SETUP RECEIVER */ - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); - - /* SETUP TRANSMITTER */ - /* Program the Transmit Character Length Register (TCLR) */ - /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ - usc_OutReg( info, TCLR, 2 ); - usc_RTCmd( info, RTCmd_PurgeTxFifo ); - - /* unlatch Tx status bits, and start transmit channel. */ - usc_UnlatchTxstatusBits(info,TXSTATUS_ALL); - outw(0,info->io_base + DATAREG); - - /* ENABLE TRANSMITTER */ - usc_TCmd( info, TCmd_SendFrame ); - usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL); - - /* WAIT FOR RECEIVE COMPLETE */ - for (i=0 ; i<1000 ; i++) - if (usc_InReg( info, RCSR ) & (BIT8 | BIT4 | BIT3 | BIT1)) - break; - - /* clear Internal Data loopback mode */ - usc_enable_loopback(info, 0); - - usc_EnableMasterIrqBit(info); - - info->params.mode = oldmode; - -} /* end of usc_loopback_frame() */ - -/* usc_set_sync_mode() Programs the USC for SDLC communications. - * - * Arguments: info pointer to adapter info structure - * Return Value: None - */ -static void usc_set_sync_mode( struct mgsl_struct *info ) -{ - usc_loopback_frame( info ); - usc_set_sdlc_mode( info ); - - usc_enable_aux_clock(info, info->params.clock_speed); - - if (info->params.loopback) - usc_enable_loopback(info,1); - -} /* end of mgsl_set_sync_mode() */ - -/* usc_set_txidle() Set the HDLC idle mode for the transmitter. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_set_txidle( struct mgsl_struct *info ) -{ - u16 usc_idle_mode = IDLEMODE_FLAGS; - - /* Map API idle mode to USC register bits */ - - switch( info->idle_mode ){ - case HDLC_TXIDLE_FLAGS: usc_idle_mode = IDLEMODE_FLAGS; break; - case HDLC_TXIDLE_ALT_ZEROS_ONES: usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break; - case HDLC_TXIDLE_ZEROS: usc_idle_mode = IDLEMODE_ZERO; break; - case HDLC_TXIDLE_ONES: usc_idle_mode = IDLEMODE_ONE; break; - case HDLC_TXIDLE_ALT_MARK_SPACE: usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break; - case HDLC_TXIDLE_SPACE: usc_idle_mode = IDLEMODE_SPACE; break; - case HDLC_TXIDLE_MARK: usc_idle_mode = IDLEMODE_MARK; break; - } - - info->usc_idle_mode = usc_idle_mode; - //usc_OutReg(info, TCSR, usc_idle_mode); - info->tcsr_value &= ~IDLEMODE_MASK; /* clear idle mode bits */ - info->tcsr_value += usc_idle_mode; - usc_OutReg(info, TCSR, info->tcsr_value); - - /* - * if SyncLink WAN adapter is running in external sync mode, the - * transmitter has been set to Monosync in order to try to mimic - * a true raw outbound bit stream. Monosync still sends an open/close - * sync char at the start/end of a frame. Try to match those sync - * patterns to the idle mode set here - */ - if ( info->params.mode == MGSL_MODE_RAW ) { - unsigned char syncpat = 0; - switch( info->idle_mode ) { - case HDLC_TXIDLE_FLAGS: - syncpat = 0x7e; - break; - case HDLC_TXIDLE_ALT_ZEROS_ONES: - syncpat = 0x55; - break; - case HDLC_TXIDLE_ZEROS: - case HDLC_TXIDLE_SPACE: - syncpat = 0x00; - break; - case HDLC_TXIDLE_ONES: - case HDLC_TXIDLE_MARK: - syncpat = 0xff; - break; - case HDLC_TXIDLE_ALT_MARK_SPACE: - syncpat = 0xaa; - break; - } - - usc_SetTransmitSyncChars(info,syncpat,syncpat); - } - -} /* end of usc_set_txidle() */ - -/* usc_get_serial_signals() - * - * Query the adapter for the state of the V24 status (input) signals. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_get_serial_signals( struct mgsl_struct *info ) -{ - u16 status; - - /* clear all serial signals except RTS and DTR */ - info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR; - - /* Read the Misc Interrupt status Register (MISR) to get */ - /* the V24 status signals. */ - - status = usc_InReg( info, MISR ); - - /* set serial signal bits to reflect MISR */ - - if ( status & MISCSTATUS_CTS ) - info->serial_signals |= SerialSignal_CTS; - - if ( status & MISCSTATUS_DCD ) - info->serial_signals |= SerialSignal_DCD; - - if ( status & MISCSTATUS_RI ) - info->serial_signals |= SerialSignal_RI; - - if ( status & MISCSTATUS_DSR ) - info->serial_signals |= SerialSignal_DSR; - -} /* end of usc_get_serial_signals() */ - -/* usc_set_serial_signals() - * - * Set the state of RTS and DTR based on contents of - * serial_signals member of device extension. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void usc_set_serial_signals( struct mgsl_struct *info ) -{ - u16 Control; - unsigned char V24Out = info->serial_signals; - - /* get the current value of the Port Control Register (PCR) */ - - Control = usc_InReg( info, PCR ); - - if ( V24Out & SerialSignal_RTS ) - Control &= ~(BIT6); - else - Control |= BIT6; - - if ( V24Out & SerialSignal_DTR ) - Control &= ~(BIT4); - else - Control |= BIT4; - - usc_OutReg( info, PCR, Control ); - -} /* end of usc_set_serial_signals() */ - -/* usc_enable_async_clock() - * - * Enable the async clock at the specified frequency. - * - * Arguments: info pointer to device instance data - * data_rate data rate of clock in bps - * 0 disables the AUX clock. - * Return Value: None - */ -static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate ) -{ - if ( data_rate ) { - /* - * Clock mode Control Register (CMCR) - * - * <15..14> 00 counter 1 Disabled - * <13..12> 00 counter 0 Disabled - * <11..10> 11 BRG1 Input is TxC Pin - * <9..8> 11 BRG0 Input is TxC Pin - * <7..6> 01 DPLL Input is BRG1 Output - * <5..3> 100 TxCLK comes from BRG0 - * <2..0> 100 RxCLK comes from BRG0 - * - * 0000 1111 0110 0100 = 0x0f64 - */ - - usc_OutReg( info, CMCR, 0x0f64 ); - - - /* - * Write 16-bit Time Constant for BRG0 - * Time Constant = (ClkSpeed / data_rate) - 1 - * ClkSpeed = 921600 (ISA), 691200 (PCI) - */ - - usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) ); - - /* - * Hardware Configuration Register (HCR) - * Clear Bit 1, BRG0 mode = Continuous - * Set Bit 0 to enable BRG0. - */ - - usc_OutReg( info, HCR, - (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); - - - /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ - - usc_OutReg( info, IOCR, - (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) ); - } else { - /* data rate == 0 so turn off BRG0 */ - usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) ); - } - -} /* end of usc_enable_async_clock() */ - -/* - * Buffer Structures: - * - * Normal memory access uses virtual addresses that can make discontiguous - * physical memory pages appear to be contiguous in the virtual address - * space (the processors memory mapping handles the conversions). - * - * DMA transfers require physically contiguous memory. This is because - * the DMA system controller and DMA bus masters deal with memory using - * only physical addresses. - * - * This causes a problem under Windows NT when large DMA buffers are - * needed. Fragmentation of the nonpaged pool prevents allocations of - * physically contiguous buffers larger than the PAGE_SIZE. - * - * However the 16C32 supports Bus Master Scatter/Gather DMA which - * allows DMA transfers to physically discontiguous buffers. Information - * about each data transfer buffer is contained in a memory structure - * called a 'buffer entry'. A list of buffer entries is maintained - * to track and control the use of the data transfer buffers. - * - * To support this strategy we will allocate sufficient PAGE_SIZE - * contiguous memory buffers to allow for the total required buffer - * space. - * - * The 16C32 accesses the list of buffer entries using Bus Master - * DMA. Control information is read from the buffer entries by the - * 16C32 to control data transfers. status information is written to - * the buffer entries by the 16C32 to indicate the status of completed - * transfers. - * - * The CPU writes control information to the buffer entries to control - * the 16C32 and reads status information from the buffer entries to - * determine information about received and transmitted frames. - * - * Because the CPU and 16C32 (adapter) both need simultaneous access - * to the buffer entries, the buffer entry memory is allocated with - * HalAllocateCommonBuffer(). This restricts the size of the buffer - * entry list to PAGE_SIZE. - * - * The actual data buffers on the other hand will only be accessed - * by the CPU or the adapter but not by both simultaneously. This allows - * Scatter/Gather packet based DMA procedures for using physically - * discontiguous pages. - */ - -/* - * mgsl_reset_tx_dma_buffers() - * - * Set the count for all transmit buffers to 0 to indicate the - * buffer is available for use and set the current buffer to the - * first buffer. This effectively makes all buffers free and - * discards any data in buffers. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info ) -{ - unsigned int i; - - for ( i = 0; i < info->tx_buffer_count; i++ ) { - *((unsigned long *)&(info->tx_buffer_list[i].count)) = 0; - } - - info->current_tx_buffer = 0; - info->start_tx_dma_buffer = 0; - info->tx_dma_buffers_used = 0; - - info->get_tx_holding_index = 0; - info->put_tx_holding_index = 0; - info->tx_holding_count = 0; - -} /* end of mgsl_reset_tx_dma_buffers() */ - -/* - * num_free_tx_dma_buffers() - * - * returns the number of free tx dma buffers available - * - * Arguments: info pointer to device instance data - * Return Value: number of free tx dma buffers - */ -static int num_free_tx_dma_buffers(struct mgsl_struct *info) -{ - return info->tx_buffer_count - info->tx_dma_buffers_used; -} - -/* - * mgsl_reset_rx_dma_buffers() - * - * Set the count for all receive buffers to DMABUFFERSIZE - * and set the current buffer to the first buffer. This effectively - * makes all buffers free and discards any data in buffers. - * - * Arguments: info pointer to device instance data - * Return Value: None - */ -static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info ) -{ - unsigned int i; - - for ( i = 0; i < info->rx_buffer_count; i++ ) { - *((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE; -// info->rx_buffer_list[i].count = DMABUFFERSIZE; -// info->rx_buffer_list[i].status = 0; - } - - info->current_rx_buffer = 0; - -} /* end of mgsl_reset_rx_dma_buffers() */ - -/* - * mgsl_free_rx_frame_buffers() - * - * Free the receive buffers used by a received SDLC - * frame such that the buffers can be reused. - * - * Arguments: - * - * info pointer to device instance data - * StartIndex index of 1st receive buffer of frame - * EndIndex index of last receive buffer of frame - * - * Return Value: None - */ -static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex ) -{ - bool Done = false; - DMABUFFERENTRY *pBufEntry; - unsigned int Index; - - /* Starting with 1st buffer entry of the frame clear the status */ - /* field and set the count field to DMA Buffer Size. */ - - Index = StartIndex; - - while( !Done ) { - pBufEntry = &(info->rx_buffer_list[Index]); - - if ( Index == EndIndex ) { - /* This is the last buffer of the frame! */ - Done = true; - } - - /* reset current buffer for reuse */ -// pBufEntry->status = 0; -// pBufEntry->count = DMABUFFERSIZE; - *((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE; - - /* advance to next buffer entry in linked list */ - Index++; - if ( Index == info->rx_buffer_count ) - Index = 0; - } - - /* set current buffer to next buffer after last buffer of frame */ - info->current_rx_buffer = Index; - -} /* end of free_rx_frame_buffers() */ - -/* mgsl_get_rx_frame() - * - * This function attempts to return a received SDLC frame from the - * receive DMA buffers. Only frames received without errors are returned. - * - * Arguments: info pointer to device extension - * Return Value: true if frame returned, otherwise false - */ -static bool mgsl_get_rx_frame(struct mgsl_struct *info) -{ - unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ - unsigned short status; - DMABUFFERENTRY *pBufEntry; - unsigned int framesize = 0; - bool ReturnCode = false; - unsigned long flags; - struct tty_struct *tty = info->port.tty; - bool return_frame = false; - - /* - * current_rx_buffer points to the 1st buffer of the next available - * receive frame. To find the last buffer of the frame look for - * a non-zero status field in the buffer entries. (The status - * field is set by the 16C32 after completing a receive frame. - */ - - StartIndex = EndIndex = info->current_rx_buffer; - - while( !info->rx_buffer_list[EndIndex].status ) { - /* - * If the count field of the buffer entry is non-zero then - * this buffer has not been used. (The 16C32 clears the count - * field when it starts using the buffer.) If an unused buffer - * is encountered then there are no frames available. - */ - - if ( info->rx_buffer_list[EndIndex].count ) - goto Cleanup; - - /* advance to next buffer entry in linked list */ - EndIndex++; - if ( EndIndex == info->rx_buffer_count ) - EndIndex = 0; - - /* if entire list searched then no frame available */ - if ( EndIndex == StartIndex ) { - /* If this occurs then something bad happened, - * all buffers have been 'used' but none mark - * the end of a frame. Reset buffers and receiver. - */ - - if ( info->rx_enabled ){ - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_start_receiver(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - goto Cleanup; - } - } - - - /* check status of receive frame */ - - status = info->rx_buffer_list[EndIndex].status; - - if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN | - RXSTATUS_CRC_ERROR | RXSTATUS_ABORT) ) { - if ( status & RXSTATUS_SHORT_FRAME ) - info->icount.rxshort++; - else if ( status & RXSTATUS_ABORT ) - info->icount.rxabort++; - else if ( status & RXSTATUS_OVERRUN ) - info->icount.rxover++; - else { - info->icount.rxcrc++; - if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) - return_frame = true; - } - framesize = 0; -#if SYNCLINK_GENERIC_HDLC - { - info->netdev->stats.rx_errors++; - info->netdev->stats.rx_frame_errors++; - } -#endif - } else - return_frame = true; - - if ( return_frame ) { - /* receive frame has no errors, get frame size. - * The frame size is the starting value of the RCC (which was - * set to 0xffff) minus the ending value of the RCC (decremented - * once for each receive character) minus 2 for the 16-bit CRC. - */ - - framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc; - - /* adjust frame size for CRC if any */ - if ( info->params.crc_type == HDLC_CRC_16_CCITT ) - framesize -= 2; - else if ( info->params.crc_type == HDLC_CRC_32_CCITT ) - framesize -= 4; - } - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n", - __FILE__,__LINE__,info->device_name,status,framesize); - - if ( debug_level >= DEBUG_LEVEL_DATA ) - mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr, - min_t(int, framesize, DMABUFFERSIZE),0); - - if (framesize) { - if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) && - ((framesize+1) > info->max_frame_size) ) || - (framesize > info->max_frame_size) ) - info->icount.rxlong++; - else { - /* copy dma buffer(s) to contiguous intermediate buffer */ - int copy_count = framesize; - int index = StartIndex; - unsigned char *ptmp = info->intermediate_rxbuffer; - - if ( !(status & RXSTATUS_CRC_ERROR)) - info->icount.rxok++; - - while(copy_count) { - int partial_count; - if ( copy_count > DMABUFFERSIZE ) - partial_count = DMABUFFERSIZE; - else - partial_count = copy_count; - - pBufEntry = &(info->rx_buffer_list[index]); - memcpy( ptmp, pBufEntry->virt_addr, partial_count ); - ptmp += partial_count; - copy_count -= partial_count; - - if ( ++index == info->rx_buffer_count ) - index = 0; - } - - if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) { - ++framesize; - *ptmp = (status & RXSTATUS_CRC_ERROR ? - RX_CRC_ERROR : - RX_OK); - - if ( debug_level >= DEBUG_LEVEL_DATA ) - printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n", - __FILE__,__LINE__,info->device_name, - *ptmp); - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_rx(info,info->intermediate_rxbuffer,framesize); - else -#endif - ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize); - } - } - /* Free the buffers used by this frame. */ - mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex ); - - ReturnCode = true; - -Cleanup: - - if ( info->rx_enabled && info->rx_overflow ) { - /* The receiver needs to restarted because of - * a receive overflow (buffer or FIFO). If the - * receive buffers are now empty, then restart receiver. - */ - - if ( !info->rx_buffer_list[EndIndex].status && - info->rx_buffer_list[EndIndex].count ) { - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_start_receiver(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - } - - return ReturnCode; - -} /* end of mgsl_get_rx_frame() */ - -/* mgsl_get_raw_rx_frame() - * - * This function attempts to return a received frame from the - * receive DMA buffers when running in external loop mode. In this mode, - * we will return at most one DMABUFFERSIZE frame to the application. - * The USC receiver is triggering off of DCD going active to start a new - * frame, and DCD going inactive to terminate the frame (similar to - * processing a closing flag character). - * - * In this routine, we will return DMABUFFERSIZE "chunks" at a time. - * If DCD goes inactive, the last Rx DMA Buffer will have a non-zero - * status field and the RCC field will indicate the length of the - * entire received frame. We take this RCC field and get the modulus - * of RCC and DMABUFFERSIZE to determine if number of bytes in the - * last Rx DMA buffer and return that last portion of the frame. - * - * Arguments: info pointer to device extension - * Return Value: true if frame returned, otherwise false - */ -static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info) -{ - unsigned int CurrentIndex, NextIndex; - unsigned short status; - DMABUFFERENTRY *pBufEntry; - unsigned int framesize = 0; - bool ReturnCode = false; - unsigned long flags; - struct tty_struct *tty = info->port.tty; - - /* - * current_rx_buffer points to the 1st buffer of the next available - * receive frame. The status field is set by the 16C32 after - * completing a receive frame. If the status field of this buffer - * is zero, either the USC is still filling this buffer or this - * is one of a series of buffers making up a received frame. - * - * If the count field of this buffer is zero, the USC is either - * using this buffer or has used this buffer. Look at the count - * field of the next buffer. If that next buffer's count is - * non-zero, the USC is still actively using the current buffer. - * Otherwise, if the next buffer's count field is zero, the - * current buffer is complete and the USC is using the next - * buffer. - */ - CurrentIndex = NextIndex = info->current_rx_buffer; - ++NextIndex; - if ( NextIndex == info->rx_buffer_count ) - NextIndex = 0; - - if ( info->rx_buffer_list[CurrentIndex].status != 0 || - (info->rx_buffer_list[CurrentIndex].count == 0 && - info->rx_buffer_list[NextIndex].count == 0)) { - /* - * Either the status field of this dma buffer is non-zero - * (indicating the last buffer of a receive frame) or the next - * buffer is marked as in use -- implying this buffer is complete - * and an intermediate buffer for this received frame. - */ - - status = info->rx_buffer_list[CurrentIndex].status; - - if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN | - RXSTATUS_CRC_ERROR | RXSTATUS_ABORT) ) { - if ( status & RXSTATUS_SHORT_FRAME ) - info->icount.rxshort++; - else if ( status & RXSTATUS_ABORT ) - info->icount.rxabort++; - else if ( status & RXSTATUS_OVERRUN ) - info->icount.rxover++; - else - info->icount.rxcrc++; - framesize = 0; - } else { - /* - * A receive frame is available, get frame size and status. - * - * The frame size is the starting value of the RCC (which was - * set to 0xffff) minus the ending value of the RCC (decremented - * once for each receive character) minus 2 or 4 for the 16-bit - * or 32-bit CRC. - * - * If the status field is zero, this is an intermediate buffer. - * It's size is 4K. - * - * If the DMA Buffer Entry's Status field is non-zero, the - * receive operation completed normally (ie: DCD dropped). The - * RCC field is valid and holds the received frame size. - * It is possible that the RCC field will be zero on a DMA buffer - * entry with a non-zero status. This can occur if the total - * frame size (number of bytes between the time DCD goes active - * to the time DCD goes inactive) exceeds 65535 bytes. In this - * case the 16C32 has underrun on the RCC count and appears to - * stop updating this counter to let us know the actual received - * frame size. If this happens (non-zero status and zero RCC), - * simply return the entire RxDMA Buffer - */ - if ( status ) { - /* - * In the event that the final RxDMA Buffer is - * terminated with a non-zero status and the RCC - * field is zero, we interpret this as the RCC - * having underflowed (received frame > 65535 bytes). - * - * Signal the event to the user by passing back - * a status of RxStatus_CrcError returning the full - * buffer and let the app figure out what data is - * actually valid - */ - if ( info->rx_buffer_list[CurrentIndex].rcc ) - framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc; - else - framesize = DMABUFFERSIZE; - } - else - framesize = DMABUFFERSIZE; - } - - if ( framesize > DMABUFFERSIZE ) { - /* - * if running in raw sync mode, ISR handler for - * End Of Buffer events terminates all buffers at 4K. - * If this frame size is said to be >4K, get the - * actual number of bytes of the frame in this buffer. - */ - framesize = framesize % DMABUFFERSIZE; - } - - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n", - __FILE__,__LINE__,info->device_name,status,framesize); - - if ( debug_level >= DEBUG_LEVEL_DATA ) - mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr, - min_t(int, framesize, DMABUFFERSIZE),0); - - if (framesize) { - /* copy dma buffer(s) to contiguous intermediate buffer */ - /* NOTE: we never copy more than DMABUFFERSIZE bytes */ - - pBufEntry = &(info->rx_buffer_list[CurrentIndex]); - memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize); - info->icount.rxok++; - - ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize); - } - - /* Free the buffers used by this frame. */ - mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex ); - - ReturnCode = true; - } - - - if ( info->rx_enabled && info->rx_overflow ) { - /* The receiver needs to restarted because of - * a receive overflow (buffer or FIFO). If the - * receive buffers are now empty, then restart receiver. - */ - - if ( !info->rx_buffer_list[CurrentIndex].status && - info->rx_buffer_list[CurrentIndex].count ) { - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_start_receiver(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - } - - return ReturnCode; - -} /* end of mgsl_get_raw_rx_frame() */ - -/* mgsl_load_tx_dma_buffer() - * - * Load the transmit DMA buffer with the specified data. - * - * Arguments: - * - * info pointer to device extension - * Buffer pointer to buffer containing frame to load - * BufferSize size in bytes of frame in Buffer - * - * Return Value: None - */ -static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info, - const char *Buffer, unsigned int BufferSize) -{ - unsigned short Copycount; - unsigned int i = 0; - DMABUFFERENTRY *pBufEntry; - - if ( debug_level >= DEBUG_LEVEL_DATA ) - mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1); - - if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) { - /* set CMR:13 to start transmit when - * next GoAhead (abort) is received - */ - info->cmr_value |= BIT13; - } - - /* begin loading the frame in the next available tx dma - * buffer, remember it's starting location for setting - * up tx dma operation - */ - i = info->current_tx_buffer; - info->start_tx_dma_buffer = i; - - /* Setup the status and RCC (Frame Size) fields of the 1st */ - /* buffer entry in the transmit DMA buffer list. */ - - info->tx_buffer_list[i].status = info->cmr_value & 0xf000; - info->tx_buffer_list[i].rcc = BufferSize; - info->tx_buffer_list[i].count = BufferSize; - - /* Copy frame data from 1st source buffer to the DMA buffers. */ - /* The frame data may span multiple DMA buffers. */ - - while( BufferSize ){ - /* Get a pointer to next DMA buffer entry. */ - pBufEntry = &info->tx_buffer_list[i++]; - - if ( i == info->tx_buffer_count ) - i=0; - - /* Calculate the number of bytes that can be copied from */ - /* the source buffer to this DMA buffer. */ - if ( BufferSize > DMABUFFERSIZE ) - Copycount = DMABUFFERSIZE; - else - Copycount = BufferSize; - - /* Actually copy data from source buffer to DMA buffer. */ - /* Also set the data count for this individual DMA buffer. */ - mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount); - - pBufEntry->count = Copycount; - - /* Advance source pointer and reduce remaining data count. */ - Buffer += Copycount; - BufferSize -= Copycount; - - ++info->tx_dma_buffers_used; - } - - /* remember next available tx dma buffer */ - info->current_tx_buffer = i; - -} /* end of mgsl_load_tx_dma_buffer() */ - -/* - * mgsl_register_test() - * - * Performs a register test of the 16C32. - * - * Arguments: info pointer to device instance data - * Return Value: true if test passed, otherwise false - */ -static bool mgsl_register_test( struct mgsl_struct *info ) -{ - static unsigned short BitPatterns[] = - { 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f }; - static unsigned int Patterncount = ARRAY_SIZE(BitPatterns); - unsigned int i; - bool rc = true; - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_reset(info); - - /* Verify the reset state of some registers. */ - - if ( (usc_InReg( info, SICR ) != 0) || - (usc_InReg( info, IVR ) != 0) || - (usc_InDmaReg( info, DIVR ) != 0) ){ - rc = false; - } - - if ( rc ){ - /* Write bit patterns to various registers but do it out of */ - /* sync, then read back and verify values. */ - - for ( i = 0 ; i < Patterncount ; i++ ) { - usc_OutReg( info, TC0R, BitPatterns[i] ); - usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] ); - usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] ); - usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] ); - usc_OutReg( info, RSR, BitPatterns[(i+4)%Patterncount] ); - usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] ); - - if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) || - (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) || - (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) || - (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) || - (usc_InReg( info, RSR ) != BitPatterns[(i+4)%Patterncount]) || - (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){ - rc = false; - break; - } - } - } - - usc_reset(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - return rc; - -} /* end of mgsl_register_test() */ - -/* mgsl_irq_test() Perform interrupt test of the 16C32. - * - * Arguments: info pointer to device instance data - * Return Value: true if test passed, otherwise false - */ -static bool mgsl_irq_test( struct mgsl_struct *info ) -{ - unsigned long EndTime; - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_reset(info); - - /* - * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition. - * The ISR sets irq_occurred to true. - */ - - info->irq_occurred = false; - - /* Enable INTEN gate for ISA adapter (Port 6, Bit12) */ - /* Enable INTEN (Port 6, Bit12) */ - /* This connects the IRQ request signal to the ISA bus */ - /* on the ISA adapter. This has no effect for the PCI adapter */ - usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) ); - - usc_EnableMasterIrqBit(info); - usc_EnableInterrupts(info, IO_PIN); - usc_ClearIrqPendingBits(info, IO_PIN); - - usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED); - usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - EndTime=100; - while( EndTime-- && !info->irq_occurred ) { - msleep_interruptible(10); - } - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_reset(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - return info->irq_occurred; - -} /* end of mgsl_irq_test() */ - -/* mgsl_dma_test() - * - * Perform a DMA test of the 16C32. A small frame is - * transmitted via DMA from a transmit buffer to a receive buffer - * using single buffer DMA mode. - * - * Arguments: info pointer to device instance data - * Return Value: true if test passed, otherwise false - */ -static bool mgsl_dma_test( struct mgsl_struct *info ) -{ - unsigned short FifoLevel; - unsigned long phys_addr; - unsigned int FrameSize; - unsigned int i; - char *TmpPtr; - bool rc = true; - unsigned short status=0; - unsigned long EndTime; - unsigned long flags; - MGSL_PARAMS tmp_params; - - /* save current port options */ - memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS)); - /* load default port options */ - memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); - -#define TESTFRAMESIZE 40 - - spin_lock_irqsave(&info->irq_spinlock,flags); - - /* setup 16C32 for SDLC DMA transfer mode */ - - usc_reset(info); - usc_set_sdlc_mode(info); - usc_enable_loopback(info,1); - - /* Reprogram the RDMR so that the 16C32 does NOT clear the count - * field of the buffer entry after fetching buffer address. This - * way we can detect a DMA failure for a DMA read (which should be - * non-destructive to system memory) before we try and write to - * memory (where a failure could corrupt system memory). - */ - - /* Receive DMA mode Register (RDMR) - * - * <15..14> 11 DMA mode = Linked List Buffer mode - * <13> 1 RSBinA/L = store Rx status Block in List entry - * <12> 0 1 = Clear count of List Entry after fetching - * <11..10> 00 Address mode = Increment - * <9> 1 Terminate Buffer on RxBound - * <8> 0 Bus Width = 16bits - * <7..0> ? status Bits (write as 0s) - * - * 1110 0010 0000 0000 = 0xe200 - */ - - usc_OutDmaReg( info, RDMR, 0xe200 ); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - - /* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */ - - FrameSize = TESTFRAMESIZE; - - /* setup 1st transmit buffer entry: */ - /* with frame size and transmit control word */ - - info->tx_buffer_list[0].count = FrameSize; - info->tx_buffer_list[0].rcc = FrameSize; - info->tx_buffer_list[0].status = 0x4000; - - /* build a transmit frame in 1st transmit DMA buffer */ - - TmpPtr = info->tx_buffer_list[0].virt_addr; - for (i = 0; i < FrameSize; i++ ) - *TmpPtr++ = i; - - /* setup 1st receive buffer entry: */ - /* clear status, set max receive buffer size */ - - info->rx_buffer_list[0].status = 0; - info->rx_buffer_list[0].count = FrameSize + 4; - - /* zero out the 1st receive buffer */ - - memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 ); - - /* Set count field of next buffer entries to prevent */ - /* 16C32 from using buffers after the 1st one. */ - - info->tx_buffer_list[1].count = 0; - info->rx_buffer_list[1].count = 0; - - - /***************************/ - /* Program 16C32 receiver. */ - /***************************/ - - spin_lock_irqsave(&info->irq_spinlock,flags); - - /* setup DMA transfers */ - usc_RTCmd( info, RTCmd_PurgeRxFifo ); - - /* program 16C32 receiver with physical address of 1st DMA buffer entry */ - phys_addr = info->rx_buffer_list[0].phys_entry; - usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr ); - usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) ); - - /* Clear the Rx DMA status bits (read RDMR) and start channel */ - usc_InDmaReg( info, RDMR ); - usc_DmaCmd( info, DmaCmd_InitRxChannel ); - - /* Enable Receiver (RMR <1..0> = 10) */ - usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) ); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - - /*************************************************************/ - /* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */ - /*************************************************************/ - - /* Wait 100ms for interrupt. */ - EndTime = jiffies + msecs_to_jiffies(100); - - for(;;) { - if (time_after(jiffies, EndTime)) { - rc = false; - break; - } - - spin_lock_irqsave(&info->irq_spinlock,flags); - status = usc_InDmaReg( info, RDMR ); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - if ( !(status & BIT4) && (status & BIT5) ) { - /* INITG (BIT 4) is inactive (no entry read in progress) AND */ - /* BUSY (BIT 5) is active (channel still active). */ - /* This means the buffer entry read has completed. */ - break; - } - } - - - /******************************/ - /* Program 16C32 transmitter. */ - /******************************/ - - spin_lock_irqsave(&info->irq_spinlock,flags); - - /* Program the Transmit Character Length Register (TCLR) */ - /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ - - usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count ); - usc_RTCmd( info, RTCmd_PurgeTxFifo ); - - /* Program the address of the 1st DMA Buffer Entry in linked list */ - - phys_addr = info->tx_buffer_list[0].phys_entry; - usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr ); - usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) ); - - /* unlatch Tx status bits, and start transmit channel. */ - - usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) ); - usc_DmaCmd( info, DmaCmd_InitTxChannel ); - - /* wait for DMA controller to fill transmit FIFO */ - - usc_TCmd( info, TCmd_SelectTicrTxFifostatus ); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - - /**********************************/ - /* WAIT FOR TRANSMIT FIFO TO FILL */ - /**********************************/ - - /* Wait 100ms */ - EndTime = jiffies + msecs_to_jiffies(100); - - for(;;) { - if (time_after(jiffies, EndTime)) { - rc = false; - break; - } - - spin_lock_irqsave(&info->irq_spinlock,flags); - FifoLevel = usc_InReg(info, TICR) >> 8; - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - if ( FifoLevel < 16 ) - break; - else - if ( FrameSize < 32 ) { - /* This frame is smaller than the entire transmit FIFO */ - /* so wait for the entire frame to be loaded. */ - if ( FifoLevel <= (32 - FrameSize) ) - break; - } - } - - - if ( rc ) - { - /* Enable 16C32 transmitter. */ - - spin_lock_irqsave(&info->irq_spinlock,flags); - - /* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */ - usc_TCmd( info, TCmd_SendFrame ); - usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) ); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - - /******************************/ - /* WAIT FOR TRANSMIT COMPLETE */ - /******************************/ - - /* Wait 100ms */ - EndTime = jiffies + msecs_to_jiffies(100); - - /* While timer not expired wait for transmit complete */ - - spin_lock_irqsave(&info->irq_spinlock,flags); - status = usc_InReg( info, TCSR ); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - while ( !(status & (BIT6 | BIT5 | BIT4 | BIT2 | BIT1)) ) { - if (time_after(jiffies, EndTime)) { - rc = false; - break; - } - - spin_lock_irqsave(&info->irq_spinlock,flags); - status = usc_InReg( info, TCSR ); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - } - } - - - if ( rc ){ - /* CHECK FOR TRANSMIT ERRORS */ - if ( status & (BIT5 | BIT1) ) - rc = false; - } - - if ( rc ) { - /* WAIT FOR RECEIVE COMPLETE */ - - /* Wait 100ms */ - EndTime = jiffies + msecs_to_jiffies(100); - - /* Wait for 16C32 to write receive status to buffer entry. */ - status=info->rx_buffer_list[0].status; - while ( status == 0 ) { - if (time_after(jiffies, EndTime)) { - rc = false; - break; - } - status=info->rx_buffer_list[0].status; - } - } - - - if ( rc ) { - /* CHECK FOR RECEIVE ERRORS */ - status = info->rx_buffer_list[0].status; - - if ( status & (BIT8 | BIT3 | BIT1) ) { - /* receive error has occurred */ - rc = false; - } else { - if ( memcmp( info->tx_buffer_list[0].virt_addr , - info->rx_buffer_list[0].virt_addr, FrameSize ) ){ - rc = false; - } - } - } - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_reset( info ); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - /* restore current port options */ - memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); - - return rc; - -} /* end of mgsl_dma_test() */ - -/* mgsl_adapter_test() - * - * Perform the register, IRQ, and DMA tests for the 16C32. - * - * Arguments: info pointer to device instance data - * Return Value: 0 if success, otherwise -ENODEV - */ -static int mgsl_adapter_test( struct mgsl_struct *info ) -{ - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):Testing device %s\n", - __FILE__,__LINE__,info->device_name ); - - if ( !mgsl_register_test( info ) ) { - info->init_error = DiagStatus_AddressFailure; - printk( "%s(%d):Register test failure for device %s Addr=%04X\n", - __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) ); - return -ENODEV; - } - - if ( !mgsl_irq_test( info ) ) { - info->init_error = DiagStatus_IrqFailure; - printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", - __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); - return -ENODEV; - } - - if ( !mgsl_dma_test( info ) ) { - info->init_error = DiagStatus_DmaFailure; - printk( "%s(%d):DMA test failure for device %s DMA=%d\n", - __FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) ); - return -ENODEV; - } - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):device %s passed diagnostics\n", - __FILE__,__LINE__,info->device_name ); - - return 0; - -} /* end of mgsl_adapter_test() */ - -/* mgsl_memory_test() - * - * Test the shared memory on a PCI adapter. - * - * Arguments: info pointer to device instance data - * Return Value: true if test passed, otherwise false - */ -static bool mgsl_memory_test( struct mgsl_struct *info ) -{ - static unsigned long BitPatterns[] = - { 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; - unsigned long Patterncount = ARRAY_SIZE(BitPatterns); - unsigned long i; - unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long); - unsigned long * TestAddr; - - TestAddr = (unsigned long *)info->memory_base; - - /* Test data lines with test pattern at one location. */ - - for ( i = 0 ; i < Patterncount ; i++ ) { - *TestAddr = BitPatterns[i]; - if ( *TestAddr != BitPatterns[i] ) - return false; - } - - /* Test address lines with incrementing pattern over */ - /* entire address range. */ - - for ( i = 0 ; i < TestLimit ; i++ ) { - *TestAddr = i * 4; - TestAddr++; - } - - TestAddr = (unsigned long *)info->memory_base; - - for ( i = 0 ; i < TestLimit ; i++ ) { - if ( *TestAddr != i * 4 ) - return false; - TestAddr++; - } - - memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE ); - - return true; - -} /* End Of mgsl_memory_test() */ - - -/* mgsl_load_pci_memory() - * - * Load a large block of data into the PCI shared memory. - * Use this instead of memcpy() or memmove() to move data - * into the PCI shared memory. - * - * Notes: - * - * This function prevents the PCI9050 interface chip from hogging - * the adapter local bus, which can starve the 16C32 by preventing - * 16C32 bus master cycles. - * - * The PCI9050 documentation says that the 9050 will always release - * control of the local bus after completing the current read - * or write operation. - * - * It appears that as long as the PCI9050 write FIFO is full, the - * PCI9050 treats all of the writes as a single burst transaction - * and will not release the bus. This causes DMA latency problems - * at high speeds when copying large data blocks to the shared - * memory. - * - * This function in effect, breaks the a large shared memory write - * into multiple transations by interleaving a shared memory read - * which will flush the write FIFO and 'complete' the write - * transation. This allows any pending DMA request to gain control - * of the local bus in a timely fasion. - * - * Arguments: - * - * TargetPtr pointer to target address in PCI shared memory - * SourcePtr pointer to source buffer for data - * count count in bytes of data to copy - * - * Return Value: None - */ -static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr, - unsigned short count ) -{ - /* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */ -#define PCI_LOAD_INTERVAL 64 - - unsigned short Intervalcount = count / PCI_LOAD_INTERVAL; - unsigned short Index; - unsigned long Dummy; - - for ( Index = 0 ; Index < Intervalcount ; Index++ ) - { - memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL); - Dummy = *((volatile unsigned long *)TargetPtr); - TargetPtr += PCI_LOAD_INTERVAL; - SourcePtr += PCI_LOAD_INTERVAL; - } - - memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL ); - -} /* End Of mgsl_load_pci_memory() */ - -static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit) -{ - int i; - int linecount; - if (xmit) - printk("%s tx data:\n",info->device_name); - else - printk("%s rx data:\n",info->device_name); - - while(count) { - if (count > 16) - linecount = 16; - else - linecount = count; - - for(i=0;i<linecount;i++) - printk("%02X ",(unsigned char)data[i]); - for(;i<17;i++) - printk(" "); - for(i=0;i<linecount;i++) { - if (data[i]>=040 && data[i]<=0176) - printk("%c",data[i]); - else - printk("."); - } - printk("\n"); - - data += linecount; - count -= linecount; - } -} /* end of mgsl_trace_block() */ - -/* mgsl_tx_timeout() - * - * called when HDLC frame times out - * update stats and do tx completion processing - * - * Arguments: context pointer to device instance data - * Return Value: None - */ -static void mgsl_tx_timeout(struct timer_list *t) -{ - struct mgsl_struct *info = from_timer(info, t, tx_timer); - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):mgsl_tx_timeout(%s)\n", - __FILE__,__LINE__,info->device_name); - if(info->tx_active && - (info->params.mode == MGSL_MODE_HDLC || - info->params.mode == MGSL_MODE_RAW) ) { - info->icount.txtimeout++; - } - spin_lock_irqsave(&info->irq_spinlock,flags); - info->tx_active = false; - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) - usc_loopmode_cancel_transmit( info ); - - spin_unlock_irqrestore(&info->irq_spinlock,flags); - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - mgsl_bh_transmit(info); - -} /* end of mgsl_tx_timeout() */ - -/* signal that there are no more frames to send, so that - * line is 'released' by echoing RxD to TxD when current - * transmission is complete (or immediately if no tx in progress). - */ -static int mgsl_loopmode_send_done( struct mgsl_struct * info ) -{ - unsigned long flags; - - spin_lock_irqsave(&info->irq_spinlock,flags); - if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) { - if (info->tx_active) - info->loopmode_send_done_requested = true; - else - usc_loopmode_send_done(info); - } - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - return 0; -} - -/* release the line by echoing RxD to TxD - * upon completion of a transmit frame - */ -static void usc_loopmode_send_done( struct mgsl_struct * info ) -{ - info->loopmode_send_done_requested = false; - /* clear CMR:13 to 0 to start echoing RxData to TxData */ - info->cmr_value &= ~BIT13; - usc_OutReg(info, CMR, info->cmr_value); -} - -/* abort a transmit in progress while in HDLC LoopMode - */ -static void usc_loopmode_cancel_transmit( struct mgsl_struct * info ) -{ - /* reset tx dma channel and purge TxFifo */ - usc_RTCmd( info, RTCmd_PurgeTxFifo ); - usc_DmaCmd( info, DmaCmd_ResetTxChannel ); - usc_loopmode_send_done( info ); -} - -/* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled - * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort) - * we must clear CMR:13 to begin repeating TxData to RxData - */ -static void usc_loopmode_insert_request( struct mgsl_struct * info ) -{ - info->loopmode_insert_requested = true; - - /* enable RxAbort irq. On next RxAbort, clear CMR:13 to - * begin repeating TxData on RxData (complete insertion) - */ - usc_OutReg( info, RICR, - (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) ); - - /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */ - info->cmr_value |= BIT13; - usc_OutReg(info, CMR, info->cmr_value); -} - -/* return 1 if station is inserted into the loop, otherwise 0 - */ -static int usc_loopmode_active( struct mgsl_struct * info) -{ - return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ; -} - -#if SYNCLINK_GENERIC_HDLC - -/** - * hdlcdev_attach - called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) - * @dev: pointer to network device structure - * @encoding: serial encoding setting - * @parity: FCS setting - * - * Set encoding and frame check sequence (FCS) options. - * - * Return: 0 if success, otherwise error code - */ -static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, - unsigned short parity) -{ - struct mgsl_struct *info = dev_to_port(dev); - unsigned char new_encoding; - unsigned short new_crctype; - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - switch (encoding) - { - case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; - case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; - case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; - case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; - case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; - default: return -EINVAL; - } - - switch (parity) - { - case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; - case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; - case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; - default: return -EINVAL; - } - - info->params.encoding = new_encoding; - info->params.crc_type = new_crctype; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - mgsl_program_hw(info); - - return 0; -} - -/** - * hdlcdev_xmit - called by generic HDLC layer to send a frame - * @skb: socket buffer containing HDLC frame - * @dev: pointer to network device structure - */ -static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct mgsl_struct *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); - - /* stop sending until this frame completes */ - netif_stop_queue(dev); - - /* copy data to device buffers */ - info->xmit_cnt = skb->len; - mgsl_load_tx_dma_buffer(info, skb->data, skb->len); - - /* update network statistics */ - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - - /* done with socket buffer, so free it */ - dev_kfree_skb(skb); - - /* save start time for transmit timeout detection */ - netif_trans_update(dev); - - /* start hardware transmitter if necessary */ - spin_lock_irqsave(&info->irq_spinlock,flags); - if (!info->tx_active) - usc_start_transmitter(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - return NETDEV_TX_OK; -} - -/** - * hdlcdev_open - called by network layer when interface enabled - * @dev: pointer to network device structure - * - * Claim resources and initialize hardware. - * - * Return: 0 if success, otherwise error code - */ -static int hdlcdev_open(struct net_device *dev) -{ - struct mgsl_struct *info = dev_to_port(dev); - int rc; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); - - /* generic HDLC layer open processing */ - rc = hdlc_open(dev); - if (rc) - return rc; - - /* arbitrate between network and tty opens */ - spin_lock_irqsave(&info->netlock, flags); - if (info->port.count != 0 || info->netcount != 0) { - printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); - spin_unlock_irqrestore(&info->netlock, flags); - return -EBUSY; - } - info->netcount=1; - spin_unlock_irqrestore(&info->netlock, flags); - - /* claim resources and init adapter */ - if ((rc = startup(info)) != 0) { - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - return rc; - } - - /* assert RTS and DTR, apply hardware settings */ - info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; - mgsl_program_hw(info); - - /* enable network layer transmit */ - netif_trans_update(dev); - netif_start_queue(dev); - - /* inform generic HDLC layer of current DCD status */ - spin_lock_irqsave(&info->irq_spinlock, flags); - usc_get_serial_signals(info); - spin_unlock_irqrestore(&info->irq_spinlock, flags); - if (info->serial_signals & SerialSignal_DCD) - netif_carrier_on(dev); - else - netif_carrier_off(dev); - return 0; -} - -/** - * hdlcdev_close - called by network layer when interface is disabled - * @dev: pointer to network device structure - * - * Shutdown hardware and release resources. - * - * Return: 0 if success, otherwise error code - */ -static int hdlcdev_close(struct net_device *dev) -{ - struct mgsl_struct *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); - - netif_stop_queue(dev); - - /* shutdown adapter and release resources */ - shutdown(info); - - hdlc_close(dev); - - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - - return 0; -} - -/** - * hdlcdev_ioctl - called by network layer to process IOCTL call to network device - * @dev: pointer to network device structure - * @ifr: pointer to network interface request structure - * @cmd: IOCTL command code - * - * Return: 0 if success, otherwise error code - */ -static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - const size_t size = sizeof(sync_serial_settings); - sync_serial_settings new_line; - sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; - struct mgsl_struct *info = dev_to_port(dev); - unsigned int flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - if (cmd != SIOCWANDEV) - return hdlc_ioctl(dev, ifr, cmd); - - switch(ifr->ifr_settings.type) { - case IF_GET_IFACE: /* return current sync_serial_settings */ - - ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; - if (ifr->ifr_settings.size < size) { - ifr->ifr_settings.size = size; /* data size wanted */ - return -ENOBUFS; - } - - flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - - memset(&new_line, 0, sizeof(new_line)); - switch (flags){ - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; - case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; - default: new_line.clock_type = CLOCK_DEFAULT; - } - - new_line.clock_rate = info->params.clock_speed; - new_line.loopback = info->params.loopback ? 1:0; - - if (copy_to_user(line, &new_line, size)) - return -EFAULT; - return 0; - - case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ - - if(!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&new_line, line, size)) - return -EFAULT; - - switch (new_line.clock_type) - { - case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; - case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; - case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; - case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; - case CLOCK_DEFAULT: flags = info->params.flags & - (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; - default: return -EINVAL; - } - - if (new_line.loopback != 0 && new_line.loopback != 1) - return -EINVAL; - - info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - info->params.flags |= flags; - - info->params.loopback = new_line.loopback; - - if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) - info->params.clock_speed = new_line.clock_rate; - else - info->params.clock_speed = 0; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - mgsl_program_hw(info); - return 0; - - default: - return hdlc_ioctl(dev, ifr, cmd); - } -} - -/** - * hdlcdev_tx_timeout - called by network layer when transmit timeout is detected - * - * @dev: pointer to network device structure - */ -static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue) -{ - struct mgsl_struct *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_tx_timeout(%s)\n",dev->name); - - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - - spin_lock_irqsave(&info->irq_spinlock,flags); - usc_stop_transmitter(info); - spin_unlock_irqrestore(&info->irq_spinlock,flags); - - netif_wake_queue(dev); -} - -/** - * hdlcdev_tx_done - called by device driver when transmit completes - * @info: pointer to device instance information - * - * Reenable network layer transmit if stopped. - */ -static void hdlcdev_tx_done(struct mgsl_struct *info) -{ - if (netif_queue_stopped(info->netdev)) - netif_wake_queue(info->netdev); -} - -/** - * hdlcdev_rx - called by device driver when frame received - * @info: pointer to device instance information - * @buf: pointer to buffer contianing frame data - * @size: count of data bytes in buf - * - * Pass frame to network layer. - */ -static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size) -{ - struct sk_buff *skb = dev_alloc_skb(size); - struct net_device *dev = info->netdev; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_rx(%s)\n", dev->name); - - if (skb == NULL) { - printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", - dev->name); - dev->stats.rx_dropped++; - return; - } - - skb_put_data(skb, buf, size); - - skb->protocol = hdlc_type_trans(skb, dev); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += size; - - netif_rx(skb); -} - -static const struct net_device_ops hdlcdev_ops = { - .ndo_open = hdlcdev_open, - .ndo_stop = hdlcdev_close, - .ndo_start_xmit = hdlc_start_xmit, - .ndo_do_ioctl = hdlcdev_ioctl, - .ndo_tx_timeout = hdlcdev_tx_timeout, -}; - -/** - * hdlcdev_init - called by device driver when adding device instance - * @info: pointer to device instance information - * - * Do generic HDLC initialization. - * - * Return: 0 if success, otherwise error code - */ -static int hdlcdev_init(struct mgsl_struct *info) -{ - int rc; - struct net_device *dev; - hdlc_device *hdlc; - - /* allocate and initialize network and HDLC layer objects */ - - dev = alloc_hdlcdev(info); - if (!dev) { - printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); - return -ENOMEM; - } - - /* for network layer reporting purposes only */ - dev->base_addr = info->io_base; - dev->irq = info->irq_level; - dev->dma = info->dma_level; - - /* network layer callbacks and settings */ - dev->netdev_ops = &hdlcdev_ops; - dev->watchdog_timeo = 10 * HZ; - dev->tx_queue_len = 50; - - /* generic HDLC layer callbacks and settings */ - hdlc = dev_to_hdlc(dev); - hdlc->attach = hdlcdev_attach; - hdlc->xmit = hdlcdev_xmit; - - /* register objects with HDLC layer */ - rc = register_hdlc_device(dev); - if (rc) { - printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); - free_netdev(dev); - return rc; - } - - info->netdev = dev; - return 0; -} - -/** - * hdlcdev_exit - called by device driver when removing device instance - * @info: pointer to device instance information - * - * Do generic HDLC cleanup. - */ -static void hdlcdev_exit(struct mgsl_struct *info) -{ - unregister_hdlc_device(info->netdev); - free_netdev(info->netdev); - info->netdev = NULL; -} - -#endif /* CONFIG_HDLC */ - - -static int synclink_init_one (struct pci_dev *dev, - const struct pci_device_id *ent) -{ - struct mgsl_struct *info; - - if (pci_enable_device(dev)) { - printk("error enabling pci device %p\n", dev); - return -EIO; - } - - info = mgsl_allocate_device(); - if (!info) { - printk("can't allocate device instance data.\n"); - return -EIO; - } - - /* Copy user configuration info to device instance data */ - - info->io_base = pci_resource_start(dev, 2); - info->irq_level = dev->irq; - info->phys_memory_base = pci_resource_start(dev, 3); - - /* Because veremap only works on page boundaries we must map - * a larger area than is actually implemented for the LCR - * memory range. We map a full page starting at the page boundary. - */ - info->phys_lcr_base = pci_resource_start(dev, 0); - info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1); - info->phys_lcr_base &= ~(PAGE_SIZE-1); - - info->io_addr_size = 8; - info->irq_flags = IRQF_SHARED; - - if (dev->device == 0x0210) { - /* Version 1 PCI9030 based universal PCI adapter */ - info->misc_ctrl_value = 0x007c4080; - info->hw_version = 1; - } else { - /* Version 0 PCI9050 based 5V PCI adapter - * A PCI9050 bug prevents reading LCR registers if - * LCR base address bit 7 is set. Maintain shadow - * value so we can write to LCR misc control reg. - */ - info->misc_ctrl_value = 0x087e4546; - info->hw_version = 0; - } - - mgsl_add_device(info); - - return 0; -} - -static void synclink_remove_one (struct pci_dev *dev) -{ -} - diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index afa4cc52e48d..c0b384e3ed4d 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -620,7 +620,7 @@ static inline int sanity_check(struct slgt_info *info, char *devname, const char return 0; } -/** +/* * line discipline callback wrappers * * The wrappers maintain line discipline references @@ -1678,6 +1678,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /** * hdlcdev_tx_timeout - called by network layer when transmit timeout is detected * @dev: pointer to network device structure + * @txqueue: unused */ static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue) { diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c deleted file mode 100644 index ce08c5ec331c..000000000000 --- a/drivers/tty/synclinkmp.c +++ /dev/null @@ -1,5579 +0,0 @@ -// SPDX-License-Identifier: GPL-1.0+ -/* - * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $ - * - * Device driver for Microgate SyncLink Multiport - * high speed multiprotocol serial adapter. - * - * written by Paul Fulghum for Microgate Corporation - * paulkf@microgate.com - * - * Microgate and SyncLink are trademarks of Microgate Corporation - * - * Derived from serial.c written by Theodore Ts'o and Linus Torvalds - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq)) -#if defined(__i386__) -# define BREAKPOINT() asm(" int $3"); -#else -# define BREAKPOINT() { } -#endif - -#define MAX_DEVICES 12 - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/seq_file.h> -#include <linux/slab.h> -#include <linux/netdevice.h> -#include <linux/vmalloc.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/ioctl.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/dma.h> -#include <linux/bitops.h> -#include <asm/types.h> -#include <linux/termios.h> -#include <linux/workqueue.h> -#include <linux/hdlc.h> -#include <linux/synclink.h> - -#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE)) -#define SYNCLINK_GENERIC_HDLC 1 -#else -#define SYNCLINK_GENERIC_HDLC 0 -#endif - -#define GET_USER(error,value,addr) error = get_user(value,addr) -#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 -#define PUT_USER(error,value,addr) error = put_user(value,addr) -#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 - -#include <linux/uaccess.h> - -static MGSL_PARAMS default_params = { - MGSL_MODE_HDLC, /* unsigned long mode */ - 0, /* unsigned char loopback; */ - HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ - HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ - 0, /* unsigned long clock_speed; */ - 0xff, /* unsigned char addr_filter; */ - HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ - HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ - HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ - 9600, /* unsigned long data_rate; */ - 8, /* unsigned char data_bits; */ - 1, /* unsigned char stop_bits; */ - ASYNC_PARITY_NONE /* unsigned char parity; */ -}; - -/* size in bytes of DMA data buffers */ -#define SCABUFSIZE 1024 -#define SCA_MEM_SIZE 0x40000 -#define SCA_BASE_SIZE 512 -#define SCA_REG_SIZE 16 -#define SCA_MAX_PORTS 4 -#define SCAMAXDESC 128 - -#define BUFFERLISTSIZE 4096 - -/* SCA-I style DMA buffer descriptor */ -typedef struct _SCADESC -{ - u16 next; /* lower l6 bits of next descriptor addr */ - u16 buf_ptr; /* lower 16 bits of buffer addr */ - u8 buf_base; /* upper 8 bits of buffer addr */ - u8 pad1; - u16 length; /* length of buffer */ - u8 status; /* status of buffer */ - u8 pad2; -} SCADESC, *PSCADESC; - -typedef struct _SCADESC_EX -{ - /* device driver bookkeeping section */ - char *virt_addr; /* virtual address of data buffer */ - u16 phys_entry; /* lower 16-bits of physical address of this descriptor */ -} SCADESC_EX, *PSCADESC_EX; - -/* The queue of BH actions to be performed */ - -#define BH_RECEIVE 1 -#define BH_TRANSMIT 2 -#define BH_STATUS 4 - -#define IO_PIN_SHUTDOWN_LIMIT 100 - -struct _input_signal_events { - int ri_up; - int ri_down; - int dsr_up; - int dsr_down; - int dcd_up; - int dcd_down; - int cts_up; - int cts_down; -}; - -/* - * Device instance data structure - */ -typedef struct _synclinkmp_info { - void *if_ptr; /* General purpose pointer (used by SPPP) */ - int magic; - struct tty_port port; - int line; - unsigned short close_delay; - unsigned short closing_wait; /* time to wait before closing */ - - struct mgsl_icount icount; - - int timeout; - int x_char; /* xon/xoff character */ - u16 read_status_mask1; /* break detection (SR1 indications) */ - u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */ - unsigned char ignore_status_mask1; /* break detection (SR1 indications) */ - unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */ - unsigned char *tx_buf; - int tx_put; - int tx_get; - int tx_count; - - wait_queue_head_t status_event_wait_q; - wait_queue_head_t event_wait_q; - struct timer_list tx_timer; /* HDLC transmit timeout timer */ - struct _synclinkmp_info *next_device; /* device list link */ - struct timer_list status_timer; /* input signal status check timer */ - - spinlock_t lock; /* spinlock for synchronizing with ISR */ - struct work_struct task; /* task structure for scheduling bh */ - - u32 max_frame_size; /* as set by device config */ - - u32 pending_bh; - - bool bh_running; /* Protection from multiple */ - int isr_overflow; - bool bh_requested; - - int dcd_chkcount; /* check counts to prevent */ - int cts_chkcount; /* too many IRQs if a signal */ - int dsr_chkcount; /* is floating */ - int ri_chkcount; - - char *buffer_list; /* virtual address of Rx & Tx buffer lists */ - unsigned long buffer_list_phys; - - unsigned int rx_buf_count; /* count of total allocated Rx buffers */ - SCADESC *rx_buf_list; /* list of receive buffer entries */ - SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */ - unsigned int current_rx_buf; - - unsigned int tx_buf_count; /* count of total allocated Tx buffers */ - SCADESC *tx_buf_list; /* list of transmit buffer entries */ - SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */ - unsigned int last_tx_buf; - - unsigned char *tmp_rx_buf; - unsigned int tmp_rx_buf_count; - - bool rx_enabled; - bool rx_overflow; - - bool tx_enabled; - bool tx_active; - u32 idle_mode; - - unsigned char ie0_value; - unsigned char ie1_value; - unsigned char ie2_value; - unsigned char ctrlreg_value; - unsigned char old_signals; - - char device_name[25]; /* device instance name */ - - int port_count; - int adapter_num; - int port_num; - - struct _synclinkmp_info *port_array[SCA_MAX_PORTS]; - - unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */ - - unsigned int irq_level; /* interrupt level */ - unsigned long irq_flags; - bool irq_requested; /* true if IRQ requested */ - - MGSL_PARAMS params; /* communications parameters */ - - unsigned char serial_signals; /* current serial signal states */ - - bool irq_occurred; /* for diagnostics use */ - unsigned int init_error; /* Initialization startup error */ - - u32 last_mem_alloc; - unsigned char* memory_base; /* shared memory address (PCI only) */ - u32 phys_memory_base; - int shared_mem_requested; - - unsigned char* sca_base; /* HD64570 SCA Memory address */ - u32 phys_sca_base; - u32 sca_offset; - bool sca_base_requested; - - unsigned char* lcr_base; /* local config registers (PCI only) */ - u32 phys_lcr_base; - u32 lcr_offset; - int lcr_mem_requested; - - unsigned char* statctrl_base; /* status/control register memory */ - u32 phys_statctrl_base; - u32 statctrl_offset; - bool sca_statctrl_requested; - - u32 misc_ctrl_value; - char *flag_buf; - bool drop_rts_on_tx_done; - - struct _input_signal_events input_signal_events; - - /* SPPP/Cisco HDLC device parts */ - int netcount; - spinlock_t netlock; - -#if SYNCLINK_GENERIC_HDLC - struct net_device *netdev; -#endif - -} SLMP_INFO; - -#define MGSL_MAGIC 0x5401 - -/* - * define serial signal status change macros - */ -#define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */ -#define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */ -#define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */ -#define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */ - -/* Common Register macros */ -#define LPR 0x00 -#define PABR0 0x02 -#define PABR1 0x03 -#define WCRL 0x04 -#define WCRM 0x05 -#define WCRH 0x06 -#define DPCR 0x08 -#define DMER 0x09 -#define ISR0 0x10 -#define ISR1 0x11 -#define ISR2 0x12 -#define IER0 0x14 -#define IER1 0x15 -#define IER2 0x16 -#define ITCR 0x18 -#define INTVR 0x1a -#define IMVR 0x1c - -/* MSCI Register macros */ -#define TRB 0x20 -#define TRBL 0x20 -#define TRBH 0x21 -#define SR0 0x22 -#define SR1 0x23 -#define SR2 0x24 -#define SR3 0x25 -#define FST 0x26 -#define IE0 0x28 -#define IE1 0x29 -#define IE2 0x2a -#define FIE 0x2b -#define CMD 0x2c -#define MD0 0x2e -#define MD1 0x2f -#define MD2 0x30 -#define CTL 0x31 -#define SA0 0x32 -#define SA1 0x33 -#define IDL 0x34 -#define TMC 0x35 -#define RXS 0x36 -#define TXS 0x37 -#define TRC0 0x38 -#define TRC1 0x39 -#define RRC 0x3a -#define CST0 0x3c -#define CST1 0x3d - -/* Timer Register Macros */ -#define TCNT 0x60 -#define TCNTL 0x60 -#define TCNTH 0x61 -#define TCONR 0x62 -#define TCONRL 0x62 -#define TCONRH 0x63 -#define TMCS 0x64 -#define TEPR 0x65 - -/* DMA Controller Register macros */ -#define DARL 0x80 -#define DARH 0x81 -#define DARB 0x82 -#define BAR 0x80 -#define BARL 0x80 -#define BARH 0x81 -#define BARB 0x82 -#define SAR 0x84 -#define SARL 0x84 -#define SARH 0x85 -#define SARB 0x86 -#define CPB 0x86 -#define CDA 0x88 -#define CDAL 0x88 -#define CDAH 0x89 -#define EDA 0x8a -#define EDAL 0x8a -#define EDAH 0x8b -#define BFL 0x8c -#define BFLL 0x8c -#define BFLH 0x8d -#define BCR 0x8e -#define BCRL 0x8e -#define BCRH 0x8f -#define DSR 0x90 -#define DMR 0x91 -#define FCT 0x93 -#define DIR 0x94 -#define DCMD 0x95 - -/* combine with timer or DMA register address */ -#define TIMER0 0x00 -#define TIMER1 0x08 -#define TIMER2 0x10 -#define TIMER3 0x18 -#define RXDMA 0x00 -#define TXDMA 0x20 - -/* SCA Command Codes */ -#define NOOP 0x00 -#define TXRESET 0x01 -#define TXENABLE 0x02 -#define TXDISABLE 0x03 -#define TXCRCINIT 0x04 -#define TXCRCEXCL 0x05 -#define TXEOM 0x06 -#define TXABORT 0x07 -#define MPON 0x08 -#define TXBUFCLR 0x09 -#define RXRESET 0x11 -#define RXENABLE 0x12 -#define RXDISABLE 0x13 -#define RXCRCINIT 0x14 -#define RXREJECT 0x15 -#define SEARCHMP 0x16 -#define RXCRCEXCL 0x17 -#define RXCRCCALC 0x18 -#define CHRESET 0x21 -#define HUNT 0x31 - -/* DMA command codes */ -#define SWABORT 0x01 -#define FEICLEAR 0x02 - -/* IE0 */ -#define TXINTE BIT7 -#define RXINTE BIT6 -#define TXRDYE BIT1 -#define RXRDYE BIT0 - -/* IE1 & SR1 */ -#define UDRN BIT7 -#define IDLE BIT6 -#define SYNCD BIT4 -#define FLGD BIT4 -#define CCTS BIT3 -#define CDCD BIT2 -#define BRKD BIT1 -#define ABTD BIT1 -#define GAPD BIT1 -#define BRKE BIT0 -#define IDLD BIT0 - -/* IE2 & SR2 */ -#define EOM BIT7 -#define PMP BIT6 -#define SHRT BIT6 -#define PE BIT5 -#define ABT BIT5 -#define FRME BIT4 -#define RBIT BIT4 -#define OVRN BIT3 -#define CRCE BIT2 - - -/* - * Global linked list of SyncLink devices - */ -static SLMP_INFO *synclinkmp_device_list = NULL; -static int synclinkmp_adapter_count = -1; -static int synclinkmp_device_count = 0; - -/* - * Set this param to non-zero to load eax with the - * .text section address and breakpoint on module load. - * This is useful for use with gdb and add-symbol-file command. - */ -static bool break_on_load = 0; - -/* - * Driver major number, defaults to zero to get auto - * assigned major number. May be forced as module parameter. - */ -static int ttymajor = 0; - -/* - * Array of user specified options for ISA adapters. - */ -static int debug_level = 0; -static int maxframe[MAX_DEVICES] = {0,}; - -module_param(break_on_load, bool, 0); -module_param(ttymajor, int, 0); -module_param(debug_level, int, 0); -module_param_array(maxframe, int, NULL, 0); - -static char *driver_name = "SyncLink MultiPort driver"; -static char *driver_version = "$Revision: 4.38 $"; - -static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent); -static void synclinkmp_remove_one(struct pci_dev *dev); - -static const struct pci_device_id synclinkmp_pci_tbl[] = { - { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, }, - { 0, }, /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl); - -MODULE_LICENSE("GPL"); - -static struct pci_driver synclinkmp_pci_driver = { - .name = "synclinkmp", - .id_table = synclinkmp_pci_tbl, - .probe = synclinkmp_init_one, - .remove = synclinkmp_remove_one, -}; - - -static struct tty_driver *serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - - -/* tty callbacks */ - -static int open(struct tty_struct *tty, struct file * filp); -static void close(struct tty_struct *tty, struct file * filp); -static void hangup(struct tty_struct *tty); -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios); - -static int write(struct tty_struct *tty, const unsigned char *buf, int count); -static int put_char(struct tty_struct *tty, unsigned char ch); -static void send_xchar(struct tty_struct *tty, char ch); -static void wait_until_sent(struct tty_struct *tty, int timeout); -static int write_room(struct tty_struct *tty); -static void flush_chars(struct tty_struct *tty); -static void flush_buffer(struct tty_struct *tty); -static void tx_hold(struct tty_struct *tty); -static void tx_release(struct tty_struct *tty); - -static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -static int chars_in_buffer(struct tty_struct *tty); -static void throttle(struct tty_struct * tty); -static void unthrottle(struct tty_struct * tty); -static int set_break(struct tty_struct *tty, int break_state); - -#if SYNCLINK_GENERIC_HDLC -#define dev_to_port(D) (dev_to_hdlc(D)->priv) -static void hdlcdev_tx_done(SLMP_INFO *info); -static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size); -static int hdlcdev_init(SLMP_INFO *info); -static void hdlcdev_exit(SLMP_INFO *info); -#endif - -/* ioctl handlers */ - -static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount); -static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params); -static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params); -static int get_txidle(SLMP_INFO *info, int __user *idle_mode); -static int set_txidle(SLMP_INFO *info, int idle_mode); -static int tx_enable(SLMP_INFO *info, int enable); -static int tx_abort(SLMP_INFO *info); -static int rx_enable(SLMP_INFO *info, int enable); -static int modem_input_wait(SLMP_INFO *info,int arg); -static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr); -static int tiocmget(struct tty_struct *tty); -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int set_break(struct tty_struct *tty, int break_state); - -static int add_device(SLMP_INFO *info); -static int device_init(int adapter_num, struct pci_dev *pdev); -static int claim_resources(SLMP_INFO *info); -static void release_resources(SLMP_INFO *info); - -static int startup(SLMP_INFO *info); -static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info); -static int carrier_raised(struct tty_port *port); -static void shutdown(SLMP_INFO *info); -static void program_hw(SLMP_INFO *info); -static void change_params(SLMP_INFO *info); - -static bool init_adapter(SLMP_INFO *info); -static bool register_test(SLMP_INFO *info); -static bool irq_test(SLMP_INFO *info); -static bool loopback_test(SLMP_INFO *info); -static int adapter_test(SLMP_INFO *info); -static bool memory_test(SLMP_INFO *info); - -static void reset_adapter(SLMP_INFO *info); -static void reset_port(SLMP_INFO *info); -static void async_mode(SLMP_INFO *info); -static void hdlc_mode(SLMP_INFO *info); - -static void rx_stop(SLMP_INFO *info); -static void rx_start(SLMP_INFO *info); -static void rx_reset_buffers(SLMP_INFO *info); -static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last); -static bool rx_get_frame(SLMP_INFO *info); - -static void tx_start(SLMP_INFO *info); -static void tx_stop(SLMP_INFO *info); -static void tx_load_fifo(SLMP_INFO *info); -static void tx_set_idle(SLMP_INFO *info); -static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count); - -static void get_signals(SLMP_INFO *info); -static void set_signals(SLMP_INFO *info); -static void enable_loopback(SLMP_INFO *info, int enable); -static void set_rate(SLMP_INFO *info, u32 data_rate); - -static int bh_action(SLMP_INFO *info); -static void bh_handler(struct work_struct *work); -static void bh_receive(SLMP_INFO *info); -static void bh_transmit(SLMP_INFO *info); -static void bh_status(SLMP_INFO *info); -static void isr_timer(SLMP_INFO *info); -static void isr_rxint(SLMP_INFO *info); -static void isr_rxrdy(SLMP_INFO *info); -static void isr_txint(SLMP_INFO *info); -static void isr_txrdy(SLMP_INFO *info); -static void isr_rxdmaok(SLMP_INFO *info); -static void isr_rxdmaerror(SLMP_INFO *info); -static void isr_txdmaok(SLMP_INFO *info); -static void isr_txdmaerror(SLMP_INFO *info); -static void isr_io_pin(SLMP_INFO *info, u16 status); - -static int alloc_dma_bufs(SLMP_INFO *info); -static void free_dma_bufs(SLMP_INFO *info); -static int alloc_buf_list(SLMP_INFO *info); -static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count); -static int alloc_tmp_rx_buf(SLMP_INFO *info); -static void free_tmp_rx_buf(SLMP_INFO *info); - -static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count); -static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit); -static void tx_timeout(struct timer_list *t); -static void status_timeout(struct timer_list *t); - -static unsigned char read_reg(SLMP_INFO *info, unsigned char addr); -static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val); -static u16 read_reg16(SLMP_INFO *info, unsigned char addr); -static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val); -static unsigned char read_status_reg(SLMP_INFO * info); -static void write_control_reg(SLMP_INFO * info); - - -static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes -static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes -static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes - -static u32 misc_ctrl_value = 0x007e4040; -static u32 lcr1_brdr_value = 0x00800028; - -static u32 read_ahead_count = 8; - -/* DPCR, DMA Priority Control - * - * 07..05 Not used, must be 0 - * 04 BRC, bus release condition: 0=all transfers complete - * 1=release after 1 xfer on all channels - * 03 CCC, channel change condition: 0=every cycle - * 1=after each channel completes all xfers - * 02..00 PR<2..0>, priority 100=round robin - * - * 00000100 = 0x00 - */ -static unsigned char dma_priority = 0x04; - -// Number of bytes that can be written to shared RAM -// in a single write operation -static u32 sca_pci_load_interval = 64; - -/* - * 1st function defined in .text section. Calling this function in - * init_module() followed by a breakpoint allows a remote debugger - * (gdb) to get the .text address for the add-symbol-file command. - * This allows remote debugging of dynamically loadable modules. - */ -static void* synclinkmp_get_text_ptr(void); -static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;} - -static inline int sanity_check(SLMP_INFO *info, - char *name, const char *routine) -{ -#ifdef SANITY_CHECK - static const char *badmagic = - "Warning: bad magic number for synclinkmp_struct (%s) in %s\n"; - static const char *badinfo = - "Warning: null synclinkmp_struct for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != MGSL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#else - if (!info) - return 1; -#endif - return 0; -} - -/* - * line discipline callback wrappers - * - * The wrappers maintain line discipline references - * while calling into the line discipline. - * - * ldisc_receive_buf - pass receive data to line discipline - */ - -static void ldisc_receive_buf(struct tty_struct *tty, - const __u8 *data, char *flags, int count) -{ - struct tty_ldisc *ld; - if (!tty) - return; - ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->ops->receive_buf) - ld->ops->receive_buf(tty, data, flags, count); - tty_ldisc_deref(ld); - } -} - -/* tty callbacks */ - -static int install(struct tty_driver *driver, struct tty_struct *tty) -{ - SLMP_INFO *info; - int line = tty->index; - - if (line >= synclinkmp_device_count) { - printk("%s(%d): open with invalid line #%d.\n", - __FILE__,__LINE__,line); - return -ENODEV; - } - - info = synclinkmp_device_list; - while (info && info->line != line) - info = info->next_device; - if (sanity_check(info, tty->name, "open")) - return -ENODEV; - if (info->init_error) { - printk("%s(%d):%s device is not allocated, init error=%d\n", - __FILE__, __LINE__, info->device_name, - info->init_error); - return -ENODEV; - } - - tty->driver_data = info; - - return tty_port_install(&info->port, driver, tty); -} - -/* Called when a port is opened. Init and enable port. - */ -static int open(struct tty_struct *tty, struct file *filp) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - int retval; - - info->port.tty = tty; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s open(), old ref count = %d\n", - __FILE__,__LINE__,tty->driver->name, info->port.count); - - info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - spin_lock_irqsave(&info->netlock, flags); - if (info->netcount) { - retval = -EBUSY; - spin_unlock_irqrestore(&info->netlock, flags); - goto cleanup; - } - info->port.count++; - spin_unlock_irqrestore(&info->netlock, flags); - - if (info->port.count == 1) { - /* 1st open on this device, init hardware */ - retval = startup(info); - if (retval < 0) - goto cleanup; - } - - retval = block_til_ready(tty, filp, info); - if (retval) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready() returned %d\n", - __FILE__,__LINE__, info->device_name, retval); - goto cleanup; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s open() success\n", - __FILE__,__LINE__, info->device_name); - retval = 0; - -cleanup: - if (retval) { - if (tty->count == 1) - info->port.tty = NULL; /* tty layer will release tty struct */ - if(info->port.count) - info->port.count--; - } - - return retval; -} - -/* Called when port is closed. Wait for remaining data to be - * sent. Disable port and free resources. - */ -static void close(struct tty_struct *tty, struct file *filp) -{ - SLMP_INFO * info = tty->driver_data; - - if (sanity_check(info, tty->name, "close")) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s close() entry, count=%d\n", - __FILE__,__LINE__, info->device_name, info->port.count); - - if (tty_port_close_start(&info->port, tty, filp) == 0) - goto cleanup; - - mutex_lock(&info->port.mutex); - if (tty_port_initialized(&info->port)) - wait_until_sent(tty, info->timeout); - - flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - mutex_unlock(&info->port.mutex); - - tty_port_close_end(&info->port, tty); - info->port.tty = NULL; -cleanup: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__, - tty->driver->name, info->port.count); -} - -/* Called by tty_hangup() when a hangup is signaled. - * This is the same as closing all open descriptors for the port. - */ -static void hangup(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s hangup()\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "hangup")) - return; - - mutex_lock(&info->port.mutex); - flush_buffer(tty); - shutdown(info); - - spin_lock_irqsave(&info->port.lock, flags); - info->port.count = 0; - info->port.tty = NULL; - spin_unlock_irqrestore(&info->port.lock, flags); - tty_port_set_active(&info->port, 1); - mutex_unlock(&info->port.mutex); - - wake_up_interruptible(&info->port.open_wait); -} - -/* Set new termios settings - */ -static void set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__, - tty->driver->name ); - - change_params(info); - - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) { - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) { - info->serial_signals |= SerialSignal_DTR; - if (!C_CRTSCTS(tty) || !tty_throttled(tty)) - info->serial_signals |= SerialSignal_RTS; - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } - - /* Handle turning off CRTSCTS */ - if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) { - tty->hw_stopped = 0; - tx_release(tty); - } -} - -/* Send a block of data - * - * Arguments: - * - * tty pointer to tty information structure - * buf pointer to buffer containing send data - * count size of send data in bytes - * - * Return Value: number of characters written - */ -static int write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s write() count=%d\n", - __FILE__,__LINE__,info->device_name,count); - - if (sanity_check(info, tty->name, "write")) - goto cleanup; - - if (!info->tx_buf) - goto cleanup; - - if (info->params.mode == MGSL_MODE_HDLC) { - if (count > info->max_frame_size) { - ret = -EIO; - goto cleanup; - } - if (info->tx_active) - goto cleanup; - if (info->tx_count) { - /* send accumulated data from send_char() calls */ - /* as frame and wait before accepting more data. */ - tx_load_dma_buffer(info, info->tx_buf, info->tx_count); - goto start; - } - ret = info->tx_count = count; - tx_load_dma_buffer(info, buf, count); - goto start; - } - - for (;;) { - c = min_t(int, count, - min(info->max_frame_size - info->tx_count - 1, - info->max_frame_size - info->tx_put)); - if (c <= 0) - break; - - memcpy(info->tx_buf + info->tx_put, buf, c); - - spin_lock_irqsave(&info->lock,flags); - info->tx_put += c; - if (info->tx_put >= info->max_frame_size) - info->tx_put -= info->max_frame_size; - info->tx_count += c; - spin_unlock_irqrestore(&info->lock,flags); - - buf += c; - count -= c; - ret += c; - } - - if (info->params.mode == MGSL_MODE_HDLC) { - if (count) { - ret = info->tx_count = 0; - goto cleanup; - } - tx_load_dma_buffer(info, info->tx_buf, info->tx_count); - } -start: - if (info->tx_count && !tty->stopped && !tty->hw_stopped) { - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } - -cleanup: - if (debug_level >= DEBUG_LEVEL_INFO) - printk( "%s(%d):%s write() returning=%d\n", - __FILE__,__LINE__,info->device_name,ret); - return ret; -} - -/* Add a character to the transmit buffer. - */ -static int put_char(struct tty_struct *tty, unsigned char ch) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - int ret = 0; - - if ( debug_level >= DEBUG_LEVEL_INFO ) { - printk( "%s(%d):%s put_char(%d)\n", - __FILE__,__LINE__,info->device_name,ch); - } - - if (sanity_check(info, tty->name, "put_char")) - return 0; - - if (!info->tx_buf) - return 0; - - spin_lock_irqsave(&info->lock,flags); - - if ( (info->params.mode != MGSL_MODE_HDLC) || - !info->tx_active ) { - - if (info->tx_count < info->max_frame_size - 1) { - info->tx_buf[info->tx_put++] = ch; - if (info->tx_put >= info->max_frame_size) - info->tx_put -= info->max_frame_size; - info->tx_count++; - ret = 1; - } - } - - spin_unlock_irqrestore(&info->lock,flags); - return ret; -} - -/* Send a high-priority XON/XOFF character - */ -static void send_xchar(struct tty_struct *tty, char ch) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s send_xchar(%d)\n", - __FILE__,__LINE__, info->device_name, ch ); - - if (sanity_check(info, tty->name, "send_xchar")) - return; - - info->x_char = ch; - if (ch) { - /* Make sure transmit interrupts are on */ - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_enabled) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* Wait until the transmitter is empty. - */ -static void wait_until_sent(struct tty_struct *tty, int timeout) -{ - SLMP_INFO * info = tty->driver_data; - unsigned long orig_jiffies, char_time; - - if (!info ) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s wait_until_sent() entry\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "wait_until_sent")) - return; - - if (!tty_port_initialized(&info->port)) - goto exit; - - orig_jiffies = jiffies; - - /* Set check interval to 1/5 of estimated time to - * send a character, and make it at least 1. The check - * interval should also be less than the timeout. - * Note: use tight timings here to satisfy the NIST-PCTS. - */ - - if ( info->params.data_rate ) { - char_time = info->timeout/(32 * 5); - if (!char_time) - char_time++; - } else - char_time = 1; - - if (timeout) - char_time = min_t(unsigned long, char_time, timeout); - - if ( info->params.mode == MGSL_MODE_HDLC ) { - while (info->tx_active) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - } else { - /* - * TODO: determine if there is something similar to USC16C32 - * TXSTATUS_ALL_SENT status - */ - while ( info->tx_active && info->tx_enabled) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - } - } - -exit: - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s wait_until_sent() exit\n", - __FILE__,__LINE__, info->device_name ); -} - -/* Return the count of free bytes in transmit buffer - */ -static int write_room(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - int ret; - - if (sanity_check(info, tty->name, "write_room")) - return 0; - - if (info->params.mode == MGSL_MODE_HDLC) { - ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; - } else { - ret = info->max_frame_size - info->tx_count - 1; - if (ret < 0) - ret = 0; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s write_room()=%d\n", - __FILE__, __LINE__, info->device_name, ret); - - return ret; -} - -/* enable transmitter and send remaining buffered characters - */ -static void flush_chars(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s flush_chars() entry tx_count=%d\n", - __FILE__,__LINE__,info->device_name,info->tx_count); - - if (sanity_check(info, tty->name, "flush_chars")) - return; - - if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped || - !info->tx_buf) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s flush_chars() entry, starting transmitter\n", - __FILE__,__LINE__,info->device_name ); - - spin_lock_irqsave(&info->lock,flags); - - if (!info->tx_active) { - if ( (info->params.mode == MGSL_MODE_HDLC) && - info->tx_count ) { - /* operating in synchronous (frame oriented) mode */ - /* copy data from circular tx_buf to */ - /* transmit DMA buffer. */ - tx_load_dma_buffer(info, - info->tx_buf,info->tx_count); - } - tx_start(info); - } - - spin_unlock_irqrestore(&info->lock,flags); -} - -/* Discard all data in the send buffer - */ -static void flush_buffer(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s flush_buffer() entry\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "flush_buffer")) - return; - - spin_lock_irqsave(&info->lock,flags); - info->tx_count = info->tx_put = info->tx_get = 0; - del_timer(&info->tx_timer); - spin_unlock_irqrestore(&info->lock,flags); - - tty_wakeup(tty); -} - -/* throttle (stop) transmitter - */ -static void tx_hold(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "tx_hold")) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):%s tx_hold()\n", - __FILE__,__LINE__,info->device_name); - - spin_lock_irqsave(&info->lock,flags); - if (info->tx_enabled) - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); -} - -/* release (start) transmitter - */ -static void tx_release(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (sanity_check(info, tty->name, "tx_release")) - return; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):%s tx_release()\n", - __FILE__,__LINE__,info->device_name); - - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_enabled) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); -} - -/* Service an IOCTL request - * - * Arguments: - * - * tty pointer to tty instance data - * cmd IOCTL command code - * arg command argument/context - * - * Return Value: 0 if success, otherwise error code - */ -static int ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - SLMP_INFO *info = tty->driver_data; - void __user *argp = (void __user *)arg; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__, - info->device_name, cmd ); - - if (sanity_check(info, tty->name, "ioctl")) - return -ENODEV; - - if (cmd != TIOCMIWAIT) { - if (tty_io_error(tty)) - return -EIO; - } - - switch (cmd) { - case MGSL_IOCGPARAMS: - return get_params(info, argp); - case MGSL_IOCSPARAMS: - return set_params(info, argp); - case MGSL_IOCGTXIDLE: - return get_txidle(info, argp); - case MGSL_IOCSTXIDLE: - return set_txidle(info, (int)arg); - case MGSL_IOCTXENABLE: - return tx_enable(info, (int)arg); - case MGSL_IOCRXENABLE: - return rx_enable(info, (int)arg); - case MGSL_IOCTXABORT: - return tx_abort(info); - case MGSL_IOCGSTATS: - return get_stats(info, argp); - case MGSL_IOCWAITEVENT: - return wait_mgsl_event(info, argp); - case MGSL_IOCLOOPTXDONE: - return 0; // TODO: Not supported, need to document - /* Wait for modem input (DCD,RI,DSR,CTS) change - * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS) - */ - case TIOCMIWAIT: - return modem_input_wait(info,(int)arg); - - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static int get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - SLMP_INFO *info = tty->driver_data; - struct mgsl_icount cnow; /* kernel counter temps */ - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock,flags); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - -/* - * /proc fs routines.... - */ - -static inline void line_info(struct seq_file *m, SLMP_INFO *info) -{ - char stat_buf[30]; - unsigned long flags; - - seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n" - "\tIRQ=%d MaxFrameSize=%u\n", - info->device_name, - info->phys_sca_base, - info->phys_memory_base, - info->phys_statctrl_base, - info->phys_lcr_base, - info->irq_level, - info->max_frame_size ); - - /* output current serial signal states */ - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - stat_buf[0] = 0; - stat_buf[1] = 0; - if (info->serial_signals & SerialSignal_RTS) - strcat(stat_buf, "|RTS"); - if (info->serial_signals & SerialSignal_CTS) - strcat(stat_buf, "|CTS"); - if (info->serial_signals & SerialSignal_DTR) - strcat(stat_buf, "|DTR"); - if (info->serial_signals & SerialSignal_DSR) - strcat(stat_buf, "|DSR"); - if (info->serial_signals & SerialSignal_DCD) - strcat(stat_buf, "|CD"); - if (info->serial_signals & SerialSignal_RI) - strcat(stat_buf, "|RI"); - - if (info->params.mode == MGSL_MODE_HDLC) { - seq_printf(m, "\tHDLC txok:%d rxok:%d", - info->icount.txok, info->icount.rxok); - if (info->icount.txunder) - seq_printf(m, " txunder:%d", info->icount.txunder); - if (info->icount.txabort) - seq_printf(m, " txabort:%d", info->icount.txabort); - if (info->icount.rxshort) - seq_printf(m, " rxshort:%d", info->icount.rxshort); - if (info->icount.rxlong) - seq_printf(m, " rxlong:%d", info->icount.rxlong); - if (info->icount.rxover) - seq_printf(m, " rxover:%d", info->icount.rxover); - if (info->icount.rxcrc) - seq_printf(m, " rxlong:%d", info->icount.rxcrc); - } else { - seq_printf(m, "\tASYNC tx:%d rx:%d", - info->icount.tx, info->icount.rx); - if (info->icount.frame) - seq_printf(m, " fe:%d", info->icount.frame); - if (info->icount.parity) - seq_printf(m, " pe:%d", info->icount.parity); - if (info->icount.brk) - seq_printf(m, " brk:%d", info->icount.brk); - if (info->icount.overrun) - seq_printf(m, " oe:%d", info->icount.overrun); - } - - /* Append serial signal status to end */ - seq_printf(m, " %s\n", stat_buf+1); - - seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", - info->tx_active,info->bh_requested,info->bh_running, - info->pending_bh); -} - -/* Called to print information about devices - */ -static int synclinkmp_proc_show(struct seq_file *m, void *v) -{ - SLMP_INFO *info; - - seq_printf(m, "synclinkmp driver:%s\n", driver_version); - - info = synclinkmp_device_list; - while( info ) { - line_info(m, info); - info = info->next_device; - } - return 0; -} - -/* Return the count of bytes in transmit buffer - */ -static int chars_in_buffer(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - - if (sanity_check(info, tty->name, "chars_in_buffer")) - return 0; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s chars_in_buffer()=%d\n", - __FILE__, __LINE__, info->device_name, info->tx_count); - - return info->tx_count; -} - -/* Signal remote device to throttle send data (our receive data) - */ -static void throttle(struct tty_struct * tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s throttle() entry\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "throttle")) - return; - - if (I_IXOFF(tty)) - send_xchar(tty, STOP_CHAR(tty)); - - if (C_CRTSCTS(tty)) { - spin_lock_irqsave(&info->lock,flags); - info->serial_signals &= ~SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* Signal remote device to stop throttling send data (our receive data) - */ -static void unthrottle(struct tty_struct * tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s unthrottle() entry\n", - __FILE__,__LINE__, info->device_name ); - - if (sanity_check(info, tty->name, "unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - send_xchar(tty, START_CHAR(tty)); - } - - if (C_CRTSCTS(tty)) { - spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - } -} - -/* set or clear transmit break condition - * break_state -1=set break condition, 0=clear - */ -static int set_break(struct tty_struct *tty, int break_state) -{ - unsigned char RegValue; - SLMP_INFO * info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s set_break(%d)\n", - __FILE__,__LINE__, info->device_name, break_state); - - if (sanity_check(info, tty->name, "set_break")) - return -EINVAL; - - spin_lock_irqsave(&info->lock,flags); - RegValue = read_reg(info, CTL); - if (break_state == -1) - RegValue |= BIT3; - else - RegValue &= ~BIT3; - write_reg(info, CTL, RegValue); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -#if SYNCLINK_GENERIC_HDLC - -/** - * hdlcdev_attach - called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) - * @dev: pointer to network device structure - * @encoding: serial encoding setting - * @parity: FCS setting - * - * Set encoding and frame check sequence (FCS) options. - * - * Return: 0 if success, otherwise error code - */ -static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, - unsigned short parity) -{ - SLMP_INFO *info = dev_to_port(dev); - unsigned char new_encoding; - unsigned short new_crctype; - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - switch (encoding) - { - case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; - case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; - case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; - case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; - case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; - default: return -EINVAL; - } - - switch (parity) - { - case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; - case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; - case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; - default: return -EINVAL; - } - - info->params.encoding = new_encoding; - info->params.crc_type = new_crctype; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - program_hw(info); - - return 0; -} - -/** - * hdlcdev_xmit - called by generic HDLC layer to send frame - * @skb: socket buffer containing HDLC frame - * @dev: pointer to network device structure - */ -static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - SLMP_INFO *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); - - /* stop sending until this frame completes */ - netif_stop_queue(dev); - - /* copy data to device buffers */ - info->tx_count = skb->len; - tx_load_dma_buffer(info, skb->data, skb->len); - - /* update network statistics */ - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - - /* done with socket buffer, so free it */ - dev_kfree_skb(skb); - - /* save start time for transmit timeout detection */ - netif_trans_update(dev); - - /* start hardware transmitter if necessary */ - spin_lock_irqsave(&info->lock,flags); - if (!info->tx_active) - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - - return NETDEV_TX_OK; -} - -/** - * hdlcdev_open - called by network layer when interface enabled - * @dev: pointer to network device structure - * - * Claim resources and initialize hardware. - * - * Return: 0 if success, otherwise error code - */ -static int hdlcdev_open(struct net_device *dev) -{ - SLMP_INFO *info = dev_to_port(dev); - int rc; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); - - /* generic HDLC layer open processing */ - rc = hdlc_open(dev); - if (rc) - return rc; - - /* arbitrate between network and tty opens */ - spin_lock_irqsave(&info->netlock, flags); - if (info->port.count != 0 || info->netcount != 0) { - printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); - spin_unlock_irqrestore(&info->netlock, flags); - return -EBUSY; - } - info->netcount=1; - spin_unlock_irqrestore(&info->netlock, flags); - - /* claim resources and init adapter */ - if ((rc = startup(info)) != 0) { - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - return rc; - } - - /* assert RTS and DTR, apply hardware settings */ - info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; - program_hw(info); - - /* enable network layer transmit */ - netif_trans_update(dev); - netif_start_queue(dev); - - /* inform generic HDLC layer of current DCD status */ - spin_lock_irqsave(&info->lock, flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock, flags); - if (info->serial_signals & SerialSignal_DCD) - netif_carrier_on(dev); - else - netif_carrier_off(dev); - return 0; -} - -/** - * hdlcdev_close - called by network layer when interface is disabled - * @dev: pointer to network device structure - * - * Shutdown hardware and release resources. - * - * Return: 0 if success, otherwise error code - */ -static int hdlcdev_close(struct net_device *dev) -{ - SLMP_INFO *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); - - netif_stop_queue(dev); - - /* shutdown adapter and release resources */ - shutdown(info); - - hdlc_close(dev); - - spin_lock_irqsave(&info->netlock, flags); - info->netcount=0; - spin_unlock_irqrestore(&info->netlock, flags); - - return 0; -} - -/** - * hdlcdev_ioctl - called by network layer to process IOCTL call to network device - * @dev: pointer to network device structure - * @ifr: pointer to network interface request structure - * @cmd: IOCTL command code - * - * Return: 0 if success, otherwise error code - */ -static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - const size_t size = sizeof(sync_serial_settings); - sync_serial_settings new_line; - sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; - SLMP_INFO *info = dev_to_port(dev); - unsigned int flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); - - /* return error if TTY interface open */ - if (info->port.count) - return -EBUSY; - - if (cmd != SIOCWANDEV) - return hdlc_ioctl(dev, ifr, cmd); - - switch(ifr->ifr_settings.type) { - case IF_GET_IFACE: /* return current sync_serial_settings */ - - ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; - if (ifr->ifr_settings.size < size) { - ifr->ifr_settings.size = size; /* data size wanted */ - return -ENOBUFS; - } - - flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - - memset(&new_line, 0, sizeof(new_line)); - switch (flags){ - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; - case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; - case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; - default: new_line.clock_type = CLOCK_DEFAULT; - } - - new_line.clock_rate = info->params.clock_speed; - new_line.loopback = info->params.loopback ? 1:0; - - if (copy_to_user(line, &new_line, size)) - return -EFAULT; - return 0; - - case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ - - if(!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&new_line, line, size)) - return -EFAULT; - - switch (new_line.clock_type) - { - case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; - case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; - case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; - case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; - case CLOCK_DEFAULT: flags = info->params.flags & - (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; - default: return -EINVAL; - } - - if (new_line.loopback != 0 && new_line.loopback != 1) - return -EINVAL; - - info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | - HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | - HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | - HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); - info->params.flags |= flags; - - info->params.loopback = new_line.loopback; - - if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) - info->params.clock_speed = new_line.clock_rate; - else - info->params.clock_speed = 0; - - /* if network interface up, reprogram hardware */ - if (info->netcount) - program_hw(info); - return 0; - - default: - return hdlc_ioctl(dev, ifr, cmd); - } -} - -/** - * hdlcdev_tx_timeout - called by network layer when transmit timeout is detected - * @dev: pointer to network device structure - */ -static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue) -{ - SLMP_INFO *info = dev_to_port(dev); - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_tx_timeout(%s)\n",dev->name); - - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - - spin_lock_irqsave(&info->lock,flags); - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); - - netif_wake_queue(dev); -} - -/** - * hdlcdev_tx_done - called by device driver when transmit completes - * @info: pointer to device instance information - * - * Reenable network layer transmit if stopped. - */ -static void hdlcdev_tx_done(SLMP_INFO *info) -{ - if (netif_queue_stopped(info->netdev)) - netif_wake_queue(info->netdev); -} - -/** - * hdlcdev_rx - called by device driver when frame received - * @info: pointer to device instance information - * @buf: pointer to buffer contianing frame data - * @size: count of data bytes in buf - * - * Pass frame to network layer. - */ -static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size) -{ - struct sk_buff *skb = dev_alloc_skb(size); - struct net_device *dev = info->netdev; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_rx(%s)\n",dev->name); - - if (skb == NULL) { - printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", - dev->name); - dev->stats.rx_dropped++; - return; - } - - skb_put_data(skb, buf, size); - - skb->protocol = hdlc_type_trans(skb, dev); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += size; - - netif_rx(skb); -} - -static const struct net_device_ops hdlcdev_ops = { - .ndo_open = hdlcdev_open, - .ndo_stop = hdlcdev_close, - .ndo_start_xmit = hdlc_start_xmit, - .ndo_do_ioctl = hdlcdev_ioctl, - .ndo_tx_timeout = hdlcdev_tx_timeout, -}; - -/** - * hdlcdev_init - called by device driver when adding device instance - * @info: pointer to device instance information - * - * Do generic HDLC initialization. - * - * Return: 0 if success, otherwise error code - */ -static int hdlcdev_init(SLMP_INFO *info) -{ - int rc; - struct net_device *dev; - hdlc_device *hdlc; - - /* allocate and initialize network and HDLC layer objects */ - - dev = alloc_hdlcdev(info); - if (!dev) { - printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); - return -ENOMEM; - } - - /* for network layer reporting purposes only */ - dev->mem_start = info->phys_sca_base; - dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1; - dev->irq = info->irq_level; - - /* network layer callbacks and settings */ - dev->netdev_ops = &hdlcdev_ops; - dev->watchdog_timeo = 10 * HZ; - dev->tx_queue_len = 50; - - /* generic HDLC layer callbacks and settings */ - hdlc = dev_to_hdlc(dev); - hdlc->attach = hdlcdev_attach; - hdlc->xmit = hdlcdev_xmit; - - /* register objects with HDLC layer */ - rc = register_hdlc_device(dev); - if (rc) { - printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); - free_netdev(dev); - return rc; - } - - info->netdev = dev; - return 0; -} - -/** - * hdlcdev_exit - called by device driver when removing device instance - * @info: pointer to device instance information - * - * Do generic HDLC cleanup. - */ -static void hdlcdev_exit(SLMP_INFO *info) -{ - unregister_hdlc_device(info->netdev); - free_netdev(info->netdev); - info->netdev = NULL; -} - -#endif /* CONFIG_HDLC */ - - -/* Return next bottom half action to perform. - * Return Value: BH action code or 0 if nothing to do. - */ -static int bh_action(SLMP_INFO *info) -{ - unsigned long flags; - int rc = 0; - - spin_lock_irqsave(&info->lock,flags); - - if (info->pending_bh & BH_RECEIVE) { - info->pending_bh &= ~BH_RECEIVE; - rc = BH_RECEIVE; - } else if (info->pending_bh & BH_TRANSMIT) { - info->pending_bh &= ~BH_TRANSMIT; - rc = BH_TRANSMIT; - } else if (info->pending_bh & BH_STATUS) { - info->pending_bh &= ~BH_STATUS; - rc = BH_STATUS; - } - - if (!rc) { - /* Mark BH routine as complete */ - info->bh_running = false; - info->bh_requested = false; - } - - spin_unlock_irqrestore(&info->lock,flags); - - return rc; -} - -/* Perform bottom half processing of work items queued by ISR. - */ -static void bh_handler(struct work_struct *work) -{ - SLMP_INFO *info = container_of(work, SLMP_INFO, task); - int action; - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_handler() entry\n", - __FILE__,__LINE__,info->device_name); - - info->bh_running = true; - - while((action = bh_action(info)) != 0) { - - /* Process work item */ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_handler() work item action=%d\n", - __FILE__,__LINE__,info->device_name, action); - - switch (action) { - - case BH_RECEIVE: - bh_receive(info); - break; - case BH_TRANSMIT: - bh_transmit(info); - break; - case BH_STATUS: - bh_status(info); - break; - default: - /* unknown work item ID */ - printk("%s(%d):%s Unknown work item ID=%08X!\n", - __FILE__,__LINE__,info->device_name,action); - break; - } - } - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_handler() exit\n", - __FILE__,__LINE__,info->device_name); -} - -static void bh_receive(SLMP_INFO *info) -{ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_receive()\n", - __FILE__,__LINE__,info->device_name); - - while( rx_get_frame(info) ); -} - -static void bh_transmit(SLMP_INFO *info) -{ - struct tty_struct *tty = info->port.tty; - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_transmit() entry\n", - __FILE__,__LINE__,info->device_name); - - if (tty) - tty_wakeup(tty); -} - -static void bh_status(SLMP_INFO *info) -{ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):%s bh_status() entry\n", - __FILE__,__LINE__,info->device_name); - - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - info->dcd_chkcount = 0; - info->cts_chkcount = 0; -} - -static void isr_timer(SLMP_INFO * info) -{ - unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; - - /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */ - write_reg(info, IER2, 0); - - /* TMCS, Timer Control/Status Register - * - * 07 CMF, Compare match flag (read only) 1=match - * 06 ECMI, CMF Interrupt Enable: 0=disabled - * 05 Reserved, must be 0 - * 04 TME, Timer Enable - * 03..00 Reserved, must be 0 - * - * 0000 0000 - */ - write_reg(info, (unsigned char)(timer + TMCS), 0); - - info->irq_occurred = true; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_timer()\n", - __FILE__,__LINE__,info->device_name); -} - -static void isr_rxint(SLMP_INFO * info) -{ - struct tty_struct *tty = info->port.tty; - struct mgsl_icount *icount = &info->icount; - unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD); - unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN; - - /* clear status bits */ - if (status) - write_reg(info, SR1, status); - - if (status2) - write_reg(info, SR2, status2); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_rxint status=%02X %02x\n", - __FILE__,__LINE__,info->device_name,status,status2); - - if (info->params.mode == MGSL_MODE_ASYNC) { - if (status & BRKD) { - icount->brk++; - - /* process break detection if tty control - * is not set to ignore it - */ - if (!(status & info->ignore_status_mask1)) { - if (info->read_status_mask1 & BRKD) { - tty_insert_flip_char(&info->port, 0, TTY_BREAK); - if (tty && (info->port.flags & ASYNC_SAK)) - do_SAK(tty); - } - } - } - } - else { - if (status & (FLGD|IDLD)) { - if (status & FLGD) - info->icount.exithunt++; - else if (status & IDLD) - info->icount.rxidle++; - wake_up_interruptible(&info->event_wait_q); - } - } - - if (status & CDCD) { - /* simulate a common modem status change interrupt - * for our handler - */ - get_signals( info ); - isr_io_pin(info, - MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD)); - } -} - -/* - * handle async rx data interrupts - */ -static void isr_rxrdy(SLMP_INFO * info) -{ - u16 status; - unsigned char DataByte; - struct mgsl_icount *icount = &info->icount; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_rxrdy\n", - __FILE__,__LINE__,info->device_name); - - while((status = read_reg(info,CST0)) & BIT0) - { - int flag = 0; - bool over = false; - DataByte = read_reg(info,TRB); - - icount->rx++; - - if ( status & (PE + FRME + OVRN) ) { - printk("%s(%d):%s rxerr=%04X\n", - __FILE__,__LINE__,info->device_name,status); - - /* update error statistics */ - if (status & PE) - icount->parity++; - else if (status & FRME) - icount->frame++; - else if (status & OVRN) - icount->overrun++; - - /* discard char if tty control flags say so */ - if (status & info->ignore_status_mask2) - continue; - - status &= info->read_status_mask2; - - if (status & PE) - flag = TTY_PARITY; - else if (status & FRME) - flag = TTY_FRAME; - if (status & OVRN) { - /* Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - over = true; - } - } /* end of if (error) */ - - tty_insert_flip_char(&info->port, DataByte, flag); - if (over) - tty_insert_flip_char(&info->port, 0, TTY_OVERRUN); - } - - if ( debug_level >= DEBUG_LEVEL_ISR ) { - printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n", - __FILE__,__LINE__,info->device_name, - icount->rx,icount->brk,icount->parity, - icount->frame,icount->overrun); - } - - tty_flip_buffer_push(&info->port); -} - -static void isr_txeom(SLMP_INFO * info, unsigned char status) -{ - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txeom status=%02x\n", - __FILE__,__LINE__,info->device_name,status); - - write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ - write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - if (status & UDRN) { - write_reg(info, CMD, TXRESET); - write_reg(info, CMD, TXENABLE); - } else - write_reg(info, CMD, TXBUFCLR); - - /* disable and clear tx interrupts */ - info->ie0_value &= ~TXRDYE; - info->ie1_value &= ~(IDLE + UDRN); - write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); - write_reg(info, SR1, (unsigned char)(UDRN + IDLE)); - - if ( info->tx_active ) { - if (info->params.mode != MGSL_MODE_ASYNC) { - if (status & UDRN) - info->icount.txunder++; - else if (status & IDLE) - info->icount.txok++; - } - - info->tx_active = false; - info->tx_count = info->tx_put = info->tx_get = 0; - - del_timer(&info->tx_timer); - - if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) { - info->serial_signals &= ~SerialSignal_RTS; - info->drop_rts_on_tx_done = false; - set_signals(info); - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - { - if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { - tx_stop(info); - return; - } - info->pending_bh |= BH_TRANSMIT; - } - } -} - - -/* - * handle tx status interrupts - */ -static void isr_txint(SLMP_INFO * info) -{ - unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS); - - /* clear status bits */ - write_reg(info, SR1, status); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txint status=%02x\n", - __FILE__,__LINE__,info->device_name,status); - - if (status & (UDRN + IDLE)) - isr_txeom(info, status); - - if (status & CCTS) { - /* simulate a common modem status change interrupt - * for our handler - */ - get_signals( info ); - isr_io_pin(info, - MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS)); - - } -} - -/* - * handle async tx data interrupts - */ -static void isr_txrdy(SLMP_INFO * info) -{ - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txrdy() tx_count=%d\n", - __FILE__,__LINE__,info->device_name,info->tx_count); - - if (info->params.mode != MGSL_MODE_ASYNC) { - /* disable TXRDY IRQ, enable IDLE IRQ */ - info->ie0_value &= ~TXRDYE; - info->ie1_value |= IDLE; - write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value)); - return; - } - - if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) { - tx_stop(info); - return; - } - - if ( info->tx_count ) - tx_load_fifo( info ); - else { - info->tx_active = false; - info->ie0_value &= ~TXRDYE; - write_reg(info, IE0, info->ie0_value); - } - - if (info->tx_count < WAKEUP_CHARS) - info->pending_bh |= BH_TRANSMIT; -} - -static void isr_rxdmaok(SLMP_INFO * info) -{ - /* BIT7 = EOT (end of transfer) - * BIT6 = EOM (end of message/frame) - */ - unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0; - - /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ - write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_rxdmaok(), status=%02x\n", - __FILE__,__LINE__,info->device_name,status); - - info->pending_bh |= BH_RECEIVE; -} - -static void isr_rxdmaerror(SLMP_INFO * info) -{ - /* BIT5 = BOF (buffer overflow) - * BIT4 = COF (counter overflow) - */ - unsigned char status = read_reg(info,RXDMA + DSR) & 0x30; - - /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ - write_reg(info, RXDMA + DSR, (unsigned char)(status | 1)); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n", - __FILE__,__LINE__,info->device_name,status); - - info->rx_overflow = true; - info->pending_bh |= BH_RECEIVE; -} - -static void isr_txdmaok(SLMP_INFO * info) -{ - unsigned char status_reg1 = read_reg(info, SR1); - - write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */ - write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txdmaok(), status=%02x\n", - __FILE__,__LINE__,info->device_name,status_reg1); - - /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */ - write_reg16(info, TRC0, 0); - info->ie0_value |= TXRDYE; - write_reg(info, IE0, info->ie0_value); -} - -static void isr_txdmaerror(SLMP_INFO * info) -{ - /* BIT5 = BOF (buffer overflow) - * BIT4 = COF (counter overflow) - */ - unsigned char status = read_reg(info,TXDMA + DSR) & 0x30; - - /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */ - write_reg(info, TXDMA + DSR, (unsigned char)(status | 1)); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s isr_txdmaerror(), status=%02x\n", - __FILE__,__LINE__,info->device_name,status); -} - -/* handle input serial signal changes - */ -static void isr_io_pin( SLMP_INFO *info, u16 status ) -{ - struct mgsl_icount *icount; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):isr_io_pin status=%04X\n", - __FILE__,__LINE__,status); - - if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED | - MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) { - icount = &info->icount; - /* update input line counters */ - if (status & MISCSTATUS_RI_LATCHED) { - icount->rng++; - if ( status & SerialSignal_RI ) - info->input_signal_events.ri_up++; - else - info->input_signal_events.ri_down++; - } - if (status & MISCSTATUS_DSR_LATCHED) { - icount->dsr++; - if ( status & SerialSignal_DSR ) - info->input_signal_events.dsr_up++; - else - info->input_signal_events.dsr_down++; - } - if (status & MISCSTATUS_DCD_LATCHED) { - if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { - info->ie1_value &= ~CDCD; - write_reg(info, IE1, info->ie1_value); - } - icount->dcd++; - if (status & SerialSignal_DCD) { - info->input_signal_events.dcd_up++; - } else - info->input_signal_events.dcd_down++; -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) { - if (status & SerialSignal_DCD) - netif_carrier_on(info->netdev); - else - netif_carrier_off(info->netdev); - } -#endif - } - if (status & MISCSTATUS_CTS_LATCHED) - { - if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) { - info->ie1_value &= ~CCTS; - write_reg(info, IE1, info->ie1_value); - } - icount->cts++; - if ( status & SerialSignal_CTS ) - info->input_signal_events.cts_up++; - else - info->input_signal_events.cts_down++; - } - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - if (tty_port_check_carrier(&info->port) && - (status & MISCSTATUS_DCD_LATCHED) ) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s CD now %s...", info->device_name, - (status & SerialSignal_DCD) ? "on" : "off"); - if (status & SerialSignal_DCD) - wake_up_interruptible(&info->port.open_wait); - else { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("doing serial hangup..."); - if (info->port.tty) - tty_hangup(info->port.tty); - } - } - - if (tty_port_cts_enabled(&info->port) && - (status & MISCSTATUS_CTS_LATCHED) ) { - if ( info->port.tty ) { - if (info->port.tty->hw_stopped) { - if (status & SerialSignal_CTS) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("CTS tx start..."); - info->port.tty->hw_stopped = 0; - tx_start(info); - info->pending_bh |= BH_TRANSMIT; - return; - } - } else { - if (!(status & SerialSignal_CTS)) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("CTS tx stop..."); - info->port.tty->hw_stopped = 1; - tx_stop(info); - } - } - } - } - } - - info->pending_bh |= BH_STATUS; -} - -/* Interrupt service routine entry point. - * - * Arguments: - * irq interrupt number that caused interrupt - * dev_id device ID supplied during interrupt registration - * regs interrupted processor context - */ -static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id) -{ - SLMP_INFO *info = dev_id; - unsigned char status, status0, status1=0; - unsigned char dmastatus, dmastatus0, dmastatus1=0; - unsigned char timerstatus0, timerstatus1=0; - unsigned char shift; - unsigned int i; - unsigned short tmp; - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n", - __FILE__, __LINE__, info->irq_level); - - spin_lock(&info->lock); - - for(;;) { - - /* get status for SCA0 (ports 0-1) */ - tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */ - status0 = (unsigned char)tmp; - dmastatus0 = (unsigned char)(tmp>>8); - timerstatus0 = read_reg(info, ISR2); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n", - __FILE__, __LINE__, info->device_name, - status0, dmastatus0, timerstatus0); - - if (info->port_count == 4) { - /* get status for SCA1 (ports 2-3) */ - tmp = read_reg16(info->port_array[2], ISR0); - status1 = (unsigned char)tmp; - dmastatus1 = (unsigned char)(tmp>>8); - timerstatus1 = read_reg(info->port_array[2], ISR2); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n", - __FILE__,__LINE__,info->device_name, - status1,dmastatus1,timerstatus1); - } - - if (!status0 && !dmastatus0 && !timerstatus0 && - !status1 && !dmastatus1 && !timerstatus1) - break; - - for(i=0; i < info->port_count ; i++) { - if (info->port_array[i] == NULL) - continue; - if (i < 2) { - status = status0; - dmastatus = dmastatus0; - } else { - status = status1; - dmastatus = dmastatus1; - } - - shift = i & 1 ? 4 :0; - - if (status & BIT0 << shift) - isr_rxrdy(info->port_array[i]); - if (status & BIT1 << shift) - isr_txrdy(info->port_array[i]); - if (status & BIT2 << shift) - isr_rxint(info->port_array[i]); - if (status & BIT3 << shift) - isr_txint(info->port_array[i]); - - if (dmastatus & BIT0 << shift) - isr_rxdmaerror(info->port_array[i]); - if (dmastatus & BIT1 << shift) - isr_rxdmaok(info->port_array[i]); - if (dmastatus & BIT2 << shift) - isr_txdmaerror(info->port_array[i]); - if (dmastatus & BIT3 << shift) - isr_txdmaok(info->port_array[i]); - } - - if (timerstatus0 & (BIT5 | BIT4)) - isr_timer(info->port_array[0]); - if (timerstatus0 & (BIT7 | BIT6)) - isr_timer(info->port_array[1]); - if (timerstatus1 & (BIT5 | BIT4)) - isr_timer(info->port_array[2]); - if (timerstatus1 & (BIT7 | BIT6)) - isr_timer(info->port_array[3]); - } - - for(i=0; i < info->port_count ; i++) { - SLMP_INFO * port = info->port_array[i]; - - /* Request bottom half processing if there's something - * for it to do and the bh is not already running. - * - * Note: startup adapter diags require interrupts. - * do not request bottom half processing if the - * device is not open in a normal mode. - */ - if ( port && (port->port.count || port->netcount) && - port->pending_bh && !port->bh_running && - !port->bh_requested ) { - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk("%s(%d):%s queueing bh task.\n", - __FILE__,__LINE__,port->device_name); - schedule_work(&port->task); - port->bh_requested = true; - } - } - - spin_unlock(&info->lock); - - if ( debug_level >= DEBUG_LEVEL_ISR ) - printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n", - __FILE__, __LINE__, info->irq_level); - return IRQ_HANDLED; -} - -/* Initialize and start device. - */ -static int startup(SLMP_INFO * info) -{ - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name); - - if (tty_port_initialized(&info->port)) - return 0; - - if (!info->tx_buf) { - info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); - if (!info->tx_buf) { - printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", - __FILE__,__LINE__,info->device_name); - return -ENOMEM; - } - } - - info->pending_bh = 0; - - memset(&info->icount, 0, sizeof(info->icount)); - - /* program hardware for current parameters */ - reset_port(info); - - change_params(info); - - mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10)); - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - tty_port_set_initialized(&info->port, 1); - - return 0; -} - -/* Called by close() and hangup() to shutdown hardware - */ -static void shutdown(SLMP_INFO * info) -{ - unsigned long flags; - - if (!tty_port_initialized(&info->port)) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s synclinkmp_shutdown()\n", - __FILE__,__LINE__, info->device_name ); - - /* clear status wait queue because status changes */ - /* can't happen after shutting down the hardware */ - wake_up_interruptible(&info->status_event_wait_q); - wake_up_interruptible(&info->event_wait_q); - - del_timer(&info->tx_timer); - del_timer(&info->status_timer); - - kfree(info->tx_buf); - info->tx_buf = NULL; - - spin_lock_irqsave(&info->lock,flags); - - reset_port(info); - - if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); - } - - spin_unlock_irqrestore(&info->lock,flags); - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - tty_port_set_initialized(&info->port, 0); -} - -static void program_hw(SLMP_INFO *info) -{ - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - - rx_stop(info); - tx_stop(info); - - info->tx_count = info->tx_put = info->tx_get = 0; - - if (info->params.mode == MGSL_MODE_HDLC || info->netcount) - hdlc_mode(info); - else - async_mode(info); - - set_signals(info); - - info->dcd_chkcount = 0; - info->cts_chkcount = 0; - info->ri_chkcount = 0; - info->dsr_chkcount = 0; - - info->ie1_value |= (CDCD|CCTS); - write_reg(info, IE1, info->ie1_value); - - get_signals(info); - - if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) ) - rx_start(info); - - spin_unlock_irqrestore(&info->lock,flags); -} - -/* Reconfigure adapter based on new parameters - */ -static void change_params(SLMP_INFO *info) -{ - unsigned cflag; - int bits_per_char; - - if (!info->port.tty) - return; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s change_params()\n", - __FILE__,__LINE__, info->device_name ); - - cflag = info->port.tty->termios.c_cflag; - - /* if B0 rate (hangup) specified then negate RTS and DTR */ - /* otherwise assert RTS and DTR */ - if (cflag & CBAUD) - info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; - else - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - - /* byte size and parity */ - - switch (cflag & CSIZE) { - case CS5: info->params.data_bits = 5; break; - case CS6: info->params.data_bits = 6; break; - case CS7: info->params.data_bits = 7; break; - case CS8: info->params.data_bits = 8; break; - /* Never happens, but GCC is too dumb to figure it out */ - default: info->params.data_bits = 7; break; - } - - if (cflag & CSTOPB) - info->params.stop_bits = 2; - else - info->params.stop_bits = 1; - - info->params.parity = ASYNC_PARITY_NONE; - if (cflag & PARENB) { - if (cflag & PARODD) - info->params.parity = ASYNC_PARITY_ODD; - else - info->params.parity = ASYNC_PARITY_EVEN; -#ifdef CMSPAR - if (cflag & CMSPAR) - info->params.parity = ASYNC_PARITY_SPACE; -#endif - } - - /* calculate number of jiffies to transmit a full - * FIFO (32 bytes) at specified data rate - */ - bits_per_char = info->params.data_bits + - info->params.stop_bits + 1; - - /* if port data rate is set to 460800 or less then - * allow tty settings to override, otherwise keep the - * current data rate. - */ - if (info->params.data_rate <= 460800) { - info->params.data_rate = tty_get_baud_rate(info->port.tty); - } - - if ( info->params.data_rate ) { - info->timeout = (32*HZ*bits_per_char) / - info->params.data_rate; - } - info->timeout += HZ/50; /* Add .02 seconds of slop */ - - tty_port_set_cts_flow(&info->port, cflag & CRTSCTS); - tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL); - - /* process tty input control flags */ - - info->read_status_mask2 = OVRN; - if (I_INPCK(info->port.tty)) - info->read_status_mask2 |= PE | FRME; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask1 |= BRKD; - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask2 |= PE | FRME; - if (I_IGNBRK(info->port.tty)) { - info->ignore_status_mask1 |= BRKD; - /* If ignoring parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask2 |= OVRN; - } - - program_hw(info); -} - -static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount) -{ - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s get_params()\n", - __FILE__,__LINE__, info->device_name); - - if (!user_icount) { - memset(&info->icount, 0, sizeof(info->icount)); - } else { - mutex_lock(&info->port.mutex); - COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); - mutex_unlock(&info->port.mutex); - if (err) - return -EFAULT; - } - - return 0; -} - -static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params) -{ - int err; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s get_params()\n", - __FILE__,__LINE__, info->device_name); - - mutex_lock(&info->port.mutex); - COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); - mutex_unlock(&info->port.mutex); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s get_params() user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - return 0; -} - -static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params) -{ - unsigned long flags; - MGSL_PARAMS tmp_params; - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s set_params\n", - __FILE__,__LINE__,info->device_name ); - COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s set_params() user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - mutex_lock(&info->port.mutex); - spin_lock_irqsave(&info->lock,flags); - memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); - spin_unlock_irqrestore(&info->lock,flags); - - change_params(info); - mutex_unlock(&info->port.mutex); - - return 0; -} - -static int get_txidle(SLMP_INFO * info, int __user *idle_mode) -{ - int err; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s get_txidle()=%d\n", - __FILE__,__LINE__, info->device_name, info->idle_mode); - - COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); - if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s get_txidle() user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); - return -EFAULT; - } - - return 0; -} - -static int set_txidle(SLMP_INFO * info, int idle_mode) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s set_txidle(%d)\n", - __FILE__,__LINE__,info->device_name, idle_mode ); - - spin_lock_irqsave(&info->lock,flags); - info->idle_mode = idle_mode; - tx_set_idle( info ); - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int tx_enable(SLMP_INFO * info, int enable) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tx_enable(%d)\n", - __FILE__,__LINE__,info->device_name, enable); - - spin_lock_irqsave(&info->lock,flags); - if ( enable ) { - if ( !info->tx_enabled ) { - tx_start(info); - } - } else { - if ( info->tx_enabled ) - tx_stop(info); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -/* abort send HDLC frame - */ -static int tx_abort(SLMP_INFO * info) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tx_abort()\n", - __FILE__,__LINE__,info->device_name); - - spin_lock_irqsave(&info->lock,flags); - if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) { - info->ie1_value &= ~UDRN; - info->ie1_value |= IDLE; - write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ - write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ - - write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - write_reg(info, CMD, TXABORT); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -static int rx_enable(SLMP_INFO * info, int enable) -{ - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s rx_enable(%d)\n", - __FILE__,__LINE__,info->device_name,enable); - - spin_lock_irqsave(&info->lock,flags); - if ( enable ) { - if ( !info->rx_enabled ) - rx_start(info); - } else { - if ( info->rx_enabled ) - rx_stop(info); - } - spin_unlock_irqrestore(&info->lock,flags); - return 0; -} - -/* wait for specified event to occur - */ -static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr) -{ - unsigned long flags; - int s; - int rc=0; - struct mgsl_icount cprev, cnow; - int events; - int mask; - struct _input_signal_events oldsigs, newsigs; - DECLARE_WAITQUEUE(wait, current); - - COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); - if (rc) { - return -EFAULT; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s wait_mgsl_event(%d)\n", - __FILE__,__LINE__,info->device_name,mask); - - spin_lock_irqsave(&info->lock,flags); - - /* return immediately if state matches requested events */ - get_signals(info); - s = info->serial_signals; - - events = mask & - ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + - ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + - ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + - ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); - if (events) { - spin_unlock_irqrestore(&info->lock,flags); - goto exit; - } - - /* save current irq counts */ - cprev = info->icount; - oldsigs = info->input_signal_events; - - /* enable hunt and idle irqs if needed */ - if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { - unsigned char oldval = info->ie1_value; - unsigned char newval = oldval + - (mask & MgslEvent_ExitHuntMode ? FLGD:0) + - (mask & MgslEvent_IdleReceived ? IDLD:0); - if ( oldval != newval ) { - info->ie1_value = newval; - write_reg(info, IE1, info->ie1_value); - } - } - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&info->event_wait_q, &wait); - - spin_unlock_irqrestore(&info->lock,flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get current irq counts */ - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - newsigs = info->input_signal_events; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - /* if no change, wait aborted for some reason */ - if (newsigs.dsr_up == oldsigs.dsr_up && - newsigs.dsr_down == oldsigs.dsr_down && - newsigs.dcd_up == oldsigs.dcd_up && - newsigs.dcd_down == oldsigs.dcd_down && - newsigs.cts_up == oldsigs.cts_up && - newsigs.cts_down == oldsigs.cts_down && - newsigs.ri_up == oldsigs.ri_up && - newsigs.ri_down == oldsigs.ri_down && - cnow.exithunt == cprev.exithunt && - cnow.rxidle == cprev.rxidle) { - rc = -EIO; - break; - } - - events = mask & - ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + - (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + - (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + - (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + - (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + - (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + - (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + - (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + - (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + - (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); - if (events) - break; - - cprev = cnow; - oldsigs = newsigs; - } - - remove_wait_queue(&info->event_wait_q, &wait); - set_current_state(TASK_RUNNING); - - - if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { - spin_lock_irqsave(&info->lock,flags); - if (!waitqueue_active(&info->event_wait_q)) { - /* disable enable exit hunt mode/idle rcvd IRQs */ - info->ie1_value &= ~(FLGD|IDLD); - write_reg(info, IE1, info->ie1_value); - } - spin_unlock_irqrestore(&info->lock,flags); - } -exit: - if ( rc == 0 ) - PUT_USER(rc, events, mask_ptr); - - return rc; -} - -static int modem_input_wait(SLMP_INFO *info,int arg) -{ - unsigned long flags; - int rc; - struct mgsl_icount cprev, cnow; - DECLARE_WAITQUEUE(wait, current); - - /* save current irq counts */ - spin_lock_irqsave(&info->lock,flags); - cprev = info->icount; - add_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - for(;;) { - schedule(); - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - - /* get new irq counts */ - spin_lock_irqsave(&info->lock,flags); - cnow = info->icount; - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); - - /* if no change, wait aborted for some reason */ - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - rc = -EIO; - break; - } - - /* check for change in caller specified modem input */ - if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || - (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || - (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || - (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { - rc = 0; - break; - } - - cprev = cnow; - } - remove_wait_queue(&info->status_event_wait_q, &wait); - set_current_state(TASK_RUNNING); - return rc; -} - -/* return the state of the serial control and status signals - */ -static int tiocmget(struct tty_struct *tty) -{ - SLMP_INFO *info = tty->driver_data; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) | - ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR : 0) | - ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR : 0) | - ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG : 0) | - ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR : 0) | - ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS : 0); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tiocmget() value=%08X\n", - __FILE__,__LINE__, info->device_name, result ); - return result; -} - -/* set modem control signals (DTR/RTS) - */ -static int tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - SLMP_INFO *info = tty->driver_data; - unsigned long flags; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s tiocmset(%x,%x)\n", - __FILE__,__LINE__,info->device_name, set, clear); - - if (set & TIOCM_RTS) - info->serial_signals |= SerialSignal_RTS; - if (set & TIOCM_DTR) - info->serial_signals |= SerialSignal_DTR; - if (clear & TIOCM_RTS) - info->serial_signals &= ~SerialSignal_RTS; - if (clear & TIOCM_DTR) - info->serial_signals &= ~SerialSignal_DTR; - - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - return 0; -} - -static int carrier_raised(struct tty_port *port) -{ - SLMP_INFO *info = container_of(port, SLMP_INFO, port); - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; -} - -static void dtr_rts(struct tty_port *port, int on) -{ - SLMP_INFO *info = container_of(port, SLMP_INFO, port); - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - if (on) - info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; - else - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); -} - -/* Block the current process until the specified port is ready to open. - */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - SLMP_INFO *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - bool do_clocal = false; - unsigned long flags; - int cd; - struct tty_port *port = &info->port; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready()\n", - __FILE__,__LINE__, tty->driver->name ); - - if (filp->f_flags & O_NONBLOCK || tty_io_error(tty)) { - /* nonblock mode is set or port is not enabled */ - /* just verify that callout device is not active */ - tty_port_set_active(port, 1); - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = true; - - /* Wait for carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - - retval = 0; - add_wait_queue(&port->open_wait, &wait); - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready() before block, count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - spin_lock_irqsave(&info->lock, flags); - port->count--; - spin_unlock_irqrestore(&info->lock, flags); - port->blocked_open++; - - while (1) { - if (C_BAUD(tty) && tty_port_initialized(port)) - tty_port_raise_dtr_rts(port); - - set_current_state(TASK_INTERRUPTIBLE); - - if (tty_hung_up_p(filp) || !tty_port_initialized(port)) { - retval = (port->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS; - break; - } - - cd = tty_port_carrier_raised(port); - if (do_clocal || cd) - break; - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready() count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - tty_unlock(tty); - schedule(); - tty_lock(tty); - } - - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->count++; - port->blocked_open--; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s block_til_ready() after, count=%d\n", - __FILE__,__LINE__, tty->driver->name, port->count ); - - if (!retval) - tty_port_set_active(port, 1); - - return retval; -} - -static int alloc_dma_bufs(SLMP_INFO *info) -{ - unsigned short BuffersPerFrame; - unsigned short BufferCount; - - // Force allocation to start at 64K boundary for each port. - // This is necessary because *all* buffer descriptors for a port - // *must* be in the same 64K block. All descriptors on a port - // share a common 'base' address (upper 8 bits of 24 bits) programmed - // into the CBP register. - info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num; - - /* Calculate the number of DMA buffers necessary to hold the */ - /* largest allowable frame size. Note: If the max frame size is */ - /* not an even multiple of the DMA buffer size then we need to */ - /* round the buffer count per frame up one. */ - - BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE); - if ( info->max_frame_size % SCABUFSIZE ) - BuffersPerFrame++; - - /* calculate total number of data buffers (SCABUFSIZE) possible - * in one ports memory (SCA_MEM_SIZE/4) after allocating memory - * for the descriptor list (BUFFERLISTSIZE). - */ - BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE; - - /* limit number of buffers to maximum amount of descriptors */ - if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC)) - BufferCount = BUFFERLISTSIZE/sizeof(SCADESC); - - /* use enough buffers to transmit one max size frame */ - info->tx_buf_count = BuffersPerFrame + 1; - - /* never use more than half the available buffers for transmit */ - if (info->tx_buf_count > (BufferCount/2)) - info->tx_buf_count = BufferCount/2; - - if (info->tx_buf_count > SCAMAXDESC) - info->tx_buf_count = SCAMAXDESC; - - /* use remaining buffers for receive */ - info->rx_buf_count = BufferCount - info->tx_buf_count; - - if (info->rx_buf_count > SCAMAXDESC) - info->rx_buf_count = SCAMAXDESC; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n", - __FILE__,__LINE__, info->device_name, - info->tx_buf_count,info->rx_buf_count); - - if ( alloc_buf_list( info ) < 0 || - alloc_frame_bufs(info, - info->rx_buf_list, - info->rx_buf_list_ex, - info->rx_buf_count) < 0 || - alloc_frame_bufs(info, - info->tx_buf_list, - info->tx_buf_list_ex, - info->tx_buf_count) < 0 || - alloc_tmp_rx_buf(info) < 0 ) { - printk("%s(%d):%s Can't allocate DMA buffer memory\n", - __FILE__,__LINE__, info->device_name); - return -ENOMEM; - } - - rx_reset_buffers( info ); - - return 0; -} - -/* Allocate DMA buffers for the transmit and receive descriptor lists. - */ -static int alloc_buf_list(SLMP_INFO *info) -{ - unsigned int i; - - /* build list in adapter shared memory */ - info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc; - info->buffer_list_phys = info->port_array[0]->last_mem_alloc; - info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE; - - memset(info->buffer_list, 0, BUFFERLISTSIZE); - - /* Save virtual address pointers to the receive and */ - /* transmit buffer lists. (Receive 1st). These pointers will */ - /* be used by the processor to access the lists. */ - info->rx_buf_list = (SCADESC *)info->buffer_list; - - info->tx_buf_list = (SCADESC *)info->buffer_list; - info->tx_buf_list += info->rx_buf_count; - - /* Build links for circular buffer entry lists (tx and rx) - * - * Note: links are physical addresses read by the SCA device - * to determine the next buffer entry to use. - */ - - for ( i = 0; i < info->rx_buf_count; i++ ) { - /* calculate and store physical address of this buffer entry */ - info->rx_buf_list_ex[i].phys_entry = - info->buffer_list_phys + (i * SCABUFSIZE); - - /* calculate and store physical address of */ - /* next entry in cirular list of entries */ - info->rx_buf_list[i].next = info->buffer_list_phys; - if ( i < info->rx_buf_count - 1 ) - info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC); - - info->rx_buf_list[i].length = SCABUFSIZE; - } - - for ( i = 0; i < info->tx_buf_count; i++ ) { - /* calculate and store physical address of this buffer entry */ - info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys + - ((info->rx_buf_count + i) * sizeof(SCADESC)); - - /* calculate and store physical address of */ - /* next entry in cirular list of entries */ - - info->tx_buf_list[i].next = info->buffer_list_phys + - info->rx_buf_count * sizeof(SCADESC); - - if ( i < info->tx_buf_count - 1 ) - info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC); - } - - return 0; -} - -/* Allocate the frame DMA buffers used by the specified buffer list. - */ -static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count) -{ - int i; - unsigned long phys_addr; - - for ( i = 0; i < count; i++ ) { - buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc; - phys_addr = info->port_array[0]->last_mem_alloc; - info->port_array[0]->last_mem_alloc += SCABUFSIZE; - - buf_list[i].buf_ptr = (unsigned short)phys_addr; - buf_list[i].buf_base = (unsigned char)(phys_addr >> 16); - } - - return 0; -} - -static void free_dma_bufs(SLMP_INFO *info) -{ - info->buffer_list = NULL; - info->rx_buf_list = NULL; - info->tx_buf_list = NULL; -} - -/* allocate buffer large enough to hold max_frame_size. - * This buffer is used to pass an assembled frame to the line discipline. - */ -static int alloc_tmp_rx_buf(SLMP_INFO *info) -{ - info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); - if (info->tmp_rx_buf == NULL) - return -ENOMEM; - /* unused flag buffer to satisfy receive_buf calling interface */ - info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL); - if (!info->flag_buf) { - kfree(info->tmp_rx_buf); - info->tmp_rx_buf = NULL; - return -ENOMEM; - } - return 0; -} - -static void free_tmp_rx_buf(SLMP_INFO *info) -{ - kfree(info->tmp_rx_buf); - info->tmp_rx_buf = NULL; - kfree(info->flag_buf); - info->flag_buf = NULL; -} - -static int claim_resources(SLMP_INFO *info) -{ - if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) { - printk( "%s(%d):%s mem addr conflict, Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->shared_mem_requested = true; - - if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) { - printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_lcr_base); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->lcr_mem_requested = true; - - if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) { - printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_sca_base); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->sca_base_requested = true; - - if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) { - printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_statctrl_base); - info->init_error = DiagStatus_AddressConflict; - goto errout; - } - else - info->sca_statctrl_requested = true; - - info->memory_base = ioremap(info->phys_memory_base, - SCA_MEM_SIZE); - if (!info->memory_base) { - printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base ); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - - info->lcr_base = ioremap(info->phys_lcr_base, PAGE_SIZE); - if (!info->lcr_base) { - printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - info->lcr_base += info->lcr_offset; - - info->sca_base = ioremap(info->phys_sca_base, PAGE_SIZE); - if (!info->sca_base) { - printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_sca_base ); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - info->sca_base += info->sca_offset; - - info->statctrl_base = ioremap(info->phys_statctrl_base, - PAGE_SIZE); - if (!info->statctrl_base) { - printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_statctrl_base ); - info->init_error = DiagStatus_CantAssignPciResources; - goto errout; - } - info->statctrl_base += info->statctrl_offset; - - if ( !memory_test(info) ) { - printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n", - __FILE__,__LINE__,info->device_name, info->phys_memory_base ); - info->init_error = DiagStatus_MemoryError; - goto errout; - } - - return 0; - -errout: - release_resources( info ); - return -ENODEV; -} - -static void release_resources(SLMP_INFO *info) -{ - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s release_resources() entry\n", - __FILE__,__LINE__,info->device_name ); - - if ( info->irq_requested ) { - free_irq(info->irq_level, info); - info->irq_requested = false; - } - - if ( info->shared_mem_requested ) { - release_mem_region(info->phys_memory_base,SCA_MEM_SIZE); - info->shared_mem_requested = false; - } - if ( info->lcr_mem_requested ) { - release_mem_region(info->phys_lcr_base + info->lcr_offset,128); - info->lcr_mem_requested = false; - } - if ( info->sca_base_requested ) { - release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE); - info->sca_base_requested = false; - } - if ( info->sca_statctrl_requested ) { - release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE); - info->sca_statctrl_requested = false; - } - - if (info->memory_base){ - iounmap(info->memory_base); - info->memory_base = NULL; - } - - if (info->sca_base) { - iounmap(info->sca_base - info->sca_offset); - info->sca_base=NULL; - } - - if (info->statctrl_base) { - iounmap(info->statctrl_base - info->statctrl_offset); - info->statctrl_base=NULL; - } - - if (info->lcr_base){ - iounmap(info->lcr_base - info->lcr_offset); - info->lcr_base = NULL; - } - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s release_resources() exit\n", - __FILE__,__LINE__,info->device_name ); -} - -/* Add the specified device instance data structure to the - * global linked list of devices and increment the device count. - */ -static int add_device(SLMP_INFO *info) -{ - info->next_device = NULL; - info->line = synclinkmp_device_count; - sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num); - - if (info->line < MAX_DEVICES) { - if (maxframe[info->line]) - info->max_frame_size = maxframe[info->line]; - } - - synclinkmp_device_count++; - - if ( !synclinkmp_device_list ) - synclinkmp_device_list = info; - else { - SLMP_INFO *current_dev = synclinkmp_device_list; - while( current_dev->next_device ) - current_dev = current_dev->next_device; - current_dev->next_device = info; - } - - if ( info->max_frame_size < 4096 ) - info->max_frame_size = 4096; - else if ( info->max_frame_size > 65535 ) - info->max_frame_size = 65535; - - printk( "SyncLink MultiPort %s: " - "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n", - info->device_name, - info->phys_sca_base, - info->phys_memory_base, - info->phys_statctrl_base, - info->phys_lcr_base, - info->irq_level, - info->max_frame_size ); - -#if SYNCLINK_GENERIC_HDLC - return hdlcdev_init(info); -#else - return 0; -#endif -} - -static const struct tty_port_operations port_ops = { - .carrier_raised = carrier_raised, - .dtr_rts = dtr_rts, -}; - -/* Allocate and initialize a device instance structure - * - * Return Value: pointer to SLMP_INFO if success, otherwise NULL - */ -static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) -{ - SLMP_INFO *info; - - info = kzalloc(sizeof(SLMP_INFO), - GFP_KERNEL); - - if (!info) { - printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n", - __FILE__,__LINE__, adapter_num, port_num); - } else { - tty_port_init(&info->port); - info->port.ops = &port_ops; - info->magic = MGSL_MAGIC; - INIT_WORK(&info->task, bh_handler); - info->max_frame_size = 4096; - info->port.close_delay = 5*HZ/10; - info->port.closing_wait = 30*HZ; - init_waitqueue_head(&info->status_event_wait_q); - init_waitqueue_head(&info->event_wait_q); - spin_lock_init(&info->netlock); - memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); - info->idle_mode = HDLC_TXIDLE_FLAGS; - info->adapter_num = adapter_num; - info->port_num = port_num; - - /* Copy configuration info to device instance data */ - info->irq_level = pdev->irq; - info->phys_lcr_base = pci_resource_start(pdev,0); - info->phys_sca_base = pci_resource_start(pdev,2); - info->phys_memory_base = pci_resource_start(pdev,3); - info->phys_statctrl_base = pci_resource_start(pdev,4); - - /* Because veremap only works on page boundaries we must map - * a larger area than is actually implemented for the LCR - * memory range. We map a full page starting at the page boundary. - */ - info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1); - info->phys_lcr_base &= ~(PAGE_SIZE-1); - - info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1); - info->phys_sca_base &= ~(PAGE_SIZE-1); - - info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1); - info->phys_statctrl_base &= ~(PAGE_SIZE-1); - - info->bus_type = MGSL_BUS_TYPE_PCI; - info->irq_flags = IRQF_SHARED; - - timer_setup(&info->tx_timer, tx_timeout, 0); - timer_setup(&info->status_timer, status_timeout, 0); - - /* Store the PCI9050 misc control register value because a flaw - * in the PCI9050 prevents LCR registers from being read if - * BIOS assigns an LCR base address with bit 7 set. - * - * Only the misc control register is accessed for which only - * write access is needed, so set an initial value and change - * bits to the device instance data as we write the value - * to the actual misc control register. - */ - info->misc_ctrl_value = 0x087e4546; - - /* initial port state is unknown - if startup errors - * occur, init_error will be set to indicate the - * problem. Once the port is fully initialized, - * this value will be set to 0 to indicate the - * port is available. - */ - info->init_error = -1; - } - - return info; -} - -static int device_init(int adapter_num, struct pci_dev *pdev) -{ - SLMP_INFO *port_array[SCA_MAX_PORTS]; - int port, rc; - - /* allocate device instances for up to SCA_MAX_PORTS devices */ - for ( port = 0; port < SCA_MAX_PORTS; ++port ) { - port_array[port] = alloc_dev(adapter_num,port,pdev); - if( port_array[port] == NULL ) { - for (--port; port >= 0; --port) { - tty_port_destroy(&port_array[port]->port); - kfree(port_array[port]); - } - return -ENOMEM; - } - } - - /* give copy of port_array to all ports and add to device list */ - for ( port = 0; port < SCA_MAX_PORTS; ++port ) { - memcpy(port_array[port]->port_array,port_array,sizeof(port_array)); - rc = add_device( port_array[port] ); - if (rc) - goto err_add; - spin_lock_init(&port_array[port]->lock); - } - - /* Allocate and claim adapter resources */ - if ( !claim_resources(port_array[0]) ) { - - alloc_dma_bufs(port_array[0]); - - /* copy resource information from first port to others */ - for ( port = 1; port < SCA_MAX_PORTS; ++port ) { - port_array[port]->lock = port_array[0]->lock; - port_array[port]->irq_level = port_array[0]->irq_level; - port_array[port]->memory_base = port_array[0]->memory_base; - port_array[port]->sca_base = port_array[0]->sca_base; - port_array[port]->statctrl_base = port_array[0]->statctrl_base; - port_array[port]->lcr_base = port_array[0]->lcr_base; - alloc_dma_bufs(port_array[port]); - } - - rc = request_irq(port_array[0]->irq_level, - synclinkmp_interrupt, - port_array[0]->irq_flags, - port_array[0]->device_name, - port_array[0]); - if ( rc ) { - printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n", - __FILE__,__LINE__, - port_array[0]->device_name, - port_array[0]->irq_level ); - goto err_irq; - } - port_array[0]->irq_requested = true; - adapter_test(port_array[0]); - } - return 0; -err_irq: - release_resources( port_array[0] ); -err_add: - for ( port = 0; port < SCA_MAX_PORTS; ++port ) { - tty_port_destroy(&port_array[port]->port); - kfree(port_array[port]); - } - return rc; -} - -static const struct tty_operations ops = { - .install = install, - .open = open, - .close = close, - .write = write, - .put_char = put_char, - .flush_chars = flush_chars, - .write_room = write_room, - .chars_in_buffer = chars_in_buffer, - .flush_buffer = flush_buffer, - .ioctl = ioctl, - .throttle = throttle, - .unthrottle = unthrottle, - .send_xchar = send_xchar, - .break_ctl = set_break, - .wait_until_sent = wait_until_sent, - .set_termios = set_termios, - .stop = tx_hold, - .start = tx_release, - .hangup = hangup, - .tiocmget = tiocmget, - .tiocmset = tiocmset, - .get_icount = get_icount, - .proc_show = synclinkmp_proc_show, -}; - - -static void synclinkmp_cleanup(void) -{ - int rc; - SLMP_INFO *info; - SLMP_INFO *tmp; - - printk("Unloading %s %s\n", driver_name, driver_version); - - if (serial_driver) { - rc = tty_unregister_driver(serial_driver); - if (rc) - printk("%s(%d) failed to unregister tty driver err=%d\n", - __FILE__,__LINE__,rc); - put_tty_driver(serial_driver); - } - - /* reset devices */ - info = synclinkmp_device_list; - while(info) { - reset_port(info); - info = info->next_device; - } - - /* release devices */ - info = synclinkmp_device_list; - while(info) { -#if SYNCLINK_GENERIC_HDLC - hdlcdev_exit(info); -#endif - free_dma_bufs(info); - free_tmp_rx_buf(info); - if ( info->port_num == 0 ) { - if (info->sca_base) - write_reg(info, LPR, 1); /* set low power mode */ - release_resources(info); - } - tmp = info; - info = info->next_device; - tty_port_destroy(&tmp->port); - kfree(tmp); - } - - pci_unregister_driver(&synclinkmp_pci_driver); -} - -/* Driver initialization entry point. - */ - -static int __init synclinkmp_init(void) -{ - int rc; - - if (break_on_load) { - synclinkmp_get_text_ptr(); - BREAKPOINT(); - } - - printk("%s %s\n", driver_name, driver_version); - - if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) { - printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); - return rc; - } - - serial_driver = alloc_tty_driver(128); - if (!serial_driver) { - rc = -ENOMEM; - goto error; - } - - /* Initialize the tty_driver structure */ - - serial_driver->driver_name = "synclinkmp"; - serial_driver->name = "ttySLM"; - serial_driver->major = ttymajor; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->init_termios.c_ispeed = 9600; - serial_driver->init_termios.c_ospeed = 9600; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &ops); - if ((rc = tty_register_driver(serial_driver)) < 0) { - printk("%s(%d):Couldn't register serial driver\n", - __FILE__,__LINE__); - put_tty_driver(serial_driver); - serial_driver = NULL; - goto error; - } - - printk("%s %s, tty major#%d\n", - driver_name, driver_version, - serial_driver->major); - - return 0; - -error: - synclinkmp_cleanup(); - return rc; -} - -static void __exit synclinkmp_exit(void) -{ - synclinkmp_cleanup(); -} - -module_init(synclinkmp_init); -module_exit(synclinkmp_exit); - -/* Set the port for internal loopback mode. - * The TxCLK and RxCLK signals are generated from the BRG and - * the TxD is looped back to the RxD internally. - */ -static void enable_loopback(SLMP_INFO *info, int enable) -{ - if (enable) { - /* MD2 (Mode Register 2) - * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback - */ - write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0))); - - /* degate external TxC clock source */ - info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); - write_control_reg(info); - - /* RXS/TXS (Rx/Tx clock source) - * 07 Reserved, must be 0 - * 06..04 Clock Source, 100=BRG - * 03..00 Clock Divisor, 0000=1 - */ - write_reg(info, RXS, 0x40); - write_reg(info, TXS, 0x40); - - } else { - /* MD2 (Mode Register 2) - * 01..00 CNCT<1..0> Channel connection, 0=normal - */ - write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0))); - - /* RXS/TXS (Rx/Tx clock source) - * 07 Reserved, must be 0 - * 06..04 Clock Source, 000=RxC/TxC Pin - * 03..00 Clock Divisor, 0000=1 - */ - write_reg(info, RXS, 0x00); - write_reg(info, TXS, 0x00); - } - - /* set LinkSpeed if available, otherwise default to 2Mbps */ - if (info->params.clock_speed) - set_rate(info, info->params.clock_speed); - else - set_rate(info, 3686400); -} - -/* Set the baud rate register to the desired speed - * - * data_rate data rate of clock in bits per second - * A data rate of 0 disables the AUX clock. - */ -static void set_rate( SLMP_INFO *info, u32 data_rate ) -{ - u32 TMCValue; - unsigned char BRValue; - u32 Divisor=0; - - /* fBRG = fCLK/(TMC * 2^BR) - */ - if (data_rate != 0) { - Divisor = 14745600/data_rate; - if (!Divisor) - Divisor = 1; - - TMCValue = Divisor; - - BRValue = 0; - if (TMCValue != 1 && TMCValue != 2) { - /* BRValue of 0 provides 50/50 duty cycle *only* when - * TMCValue is 1 or 2. BRValue of 1 to 9 always provides - * 50/50 duty cycle. - */ - BRValue = 1; - TMCValue >>= 1; - } - - /* while TMCValue is too big for TMC register, divide - * by 2 and increment BR exponent. - */ - for(; TMCValue > 256 && BRValue < 10; BRValue++) - TMCValue >>= 1; - - write_reg(info, TXS, - (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue)); - write_reg(info, RXS, - (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue)); - write_reg(info, TMC, (unsigned char)TMCValue); - } - else { - write_reg(info, TXS,0); - write_reg(info, RXS,0); - write_reg(info, TMC, 0); - } -} - -/* Disable receiver - */ -static void rx_stop(SLMP_INFO *info) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s rx_stop()\n", - __FILE__,__LINE__, info->device_name ); - - write_reg(info, CMD, RXRESET); - - info->ie0_value &= ~RXRDYE; - write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */ - - write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ - write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ - write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */ - - info->rx_enabled = false; - info->rx_overflow = false; -} - -/* enable the receiver - */ -static void rx_start(SLMP_INFO *info) -{ - int i; - - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s rx_start()\n", - __FILE__,__LINE__, info->device_name ); - - write_reg(info, CMD, RXRESET); - - if ( info->params.mode == MGSL_MODE_HDLC ) { - /* HDLC, disabe IRQ on rxdata */ - info->ie0_value &= ~RXRDYE; - write_reg(info, IE0, info->ie0_value); - - /* Reset all Rx DMA buffers and program rx dma */ - write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */ - write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */ - - for (i = 0; i < info->rx_buf_count; i++) { - info->rx_buf_list[i].status = 0xff; - - // throttle to 4 shared memory writes at a time to prevent - // hogging local bus (keep latency time for DMA requests low). - if (!(i % 4)) - read_status_reg(info); - } - info->current_rx_buf = 0; - - /* set current/1st descriptor address */ - write_reg16(info, RXDMA + CDA, - info->rx_buf_list_ex[0].phys_entry); - - /* set new last rx descriptor address */ - write_reg16(info, RXDMA + EDA, - info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry); - - /* set buffer length (shared by all rx dma data buffers) */ - write_reg16(info, RXDMA + BFL, SCABUFSIZE); - - write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */ - write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */ - } else { - /* async, enable IRQ on rxdata */ - info->ie0_value |= RXRDYE; - write_reg(info, IE0, info->ie0_value); - } - - write_reg(info, CMD, RXENABLE); - - info->rx_overflow = false; - info->rx_enabled = true; -} - -/* Enable the transmitter and send a transmit frame if - * one is loaded in the DMA buffers. - */ -static void tx_start(SLMP_INFO *info) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s tx_start() tx_count=%d\n", - __FILE__,__LINE__, info->device_name,info->tx_count ); - - if (!info->tx_enabled ) { - write_reg(info, CMD, TXRESET); - write_reg(info, CMD, TXENABLE); - info->tx_enabled = true; - } - - if ( info->tx_count ) { - - /* If auto RTS enabled and RTS is inactive, then assert */ - /* RTS and set a flag indicating that the driver should */ - /* negate RTS when the transmission completes. */ - - info->drop_rts_on_tx_done = false; - - if (info->params.mode != MGSL_MODE_ASYNC) { - - if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) { - get_signals( info ); - if ( !(info->serial_signals & SerialSignal_RTS) ) { - info->serial_signals |= SerialSignal_RTS; - set_signals( info ); - info->drop_rts_on_tx_done = true; - } - } - - write_reg16(info, TRC0, - (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level)); - - write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - /* set TX CDA (current descriptor address) */ - write_reg16(info, TXDMA + CDA, - info->tx_buf_list_ex[0].phys_entry); - - /* set TX EDA (last descriptor address) */ - write_reg16(info, TXDMA + EDA, - info->tx_buf_list_ex[info->last_tx_buf].phys_entry); - - /* enable underrun IRQ */ - info->ie1_value &= ~IDLE; - info->ie1_value |= UDRN; - write_reg(info, IE1, info->ie1_value); - write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); - - write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */ - write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */ - - mod_timer(&info->tx_timer, jiffies + - msecs_to_jiffies(5000)); - } - else { - tx_load_fifo(info); - /* async, enable IRQ on txdata */ - info->ie0_value |= TXRDYE; - write_reg(info, IE0, info->ie0_value); - } - - info->tx_active = true; - } -} - -/* stop the transmitter and DMA - */ -static void tx_stop( SLMP_INFO *info ) -{ - if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):%s tx_stop()\n", - __FILE__,__LINE__, info->device_name ); - - del_timer(&info->tx_timer); - - write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */ - write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */ - - write_reg(info, CMD, TXRESET); - - info->ie1_value &= ~(UDRN + IDLE); - write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */ - write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */ - - info->ie0_value &= ~TXRDYE; - write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */ - - info->tx_enabled = false; - info->tx_active = false; -} - -/* Fill the transmit FIFO until the FIFO is full or - * there is no more data to load. - */ -static void tx_load_fifo(SLMP_INFO *info) -{ - u8 TwoBytes[2]; - - /* do nothing is now tx data available and no XON/XOFF pending */ - - if ( !info->tx_count && !info->x_char ) - return; - - /* load the Transmit FIFO until FIFOs full or all data sent */ - - while( info->tx_count && (read_reg(info,SR0) & BIT1) ) { - - /* there is more space in the transmit FIFO and */ - /* there is more data in transmit buffer */ - - if ( (info->tx_count > 1) && !info->x_char ) { - /* write 16-bits */ - TwoBytes[0] = info->tx_buf[info->tx_get++]; - if (info->tx_get >= info->max_frame_size) - info->tx_get -= info->max_frame_size; - TwoBytes[1] = info->tx_buf[info->tx_get++]; - if (info->tx_get >= info->max_frame_size) - info->tx_get -= info->max_frame_size; - - write_reg16(info, TRB, *((u16 *)TwoBytes)); - - info->tx_count -= 2; - info->icount.tx += 2; - } else { - /* only 1 byte left to transmit or 1 FIFO slot left */ - - if (info->x_char) { - /* transmit pending high priority char */ - write_reg(info, TRB, info->x_char); - info->x_char = 0; - } else { - write_reg(info, TRB, info->tx_buf[info->tx_get++]); - if (info->tx_get >= info->max_frame_size) - info->tx_get -= info->max_frame_size; - info->tx_count--; - } - info->icount.tx++; - } - } -} - -/* Reset a port to a known state - */ -static void reset_port(SLMP_INFO *info) -{ - if (info->sca_base) { - - tx_stop(info); - rx_stop(info); - - info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); - - /* disable all port interrupts */ - info->ie0_value = 0; - info->ie1_value = 0; - info->ie2_value = 0; - write_reg(info, IE0, info->ie0_value); - write_reg(info, IE1, info->ie1_value); - write_reg(info, IE2, info->ie2_value); - - write_reg(info, CMD, CHRESET); - } -} - -/* Reset all the ports to a known state. - */ -static void reset_adapter(SLMP_INFO *info) -{ - int i; - - for ( i=0; i < SCA_MAX_PORTS; ++i) { - if (info->port_array[i]) - reset_port(info->port_array[i]); - } -} - -/* Program port for asynchronous communications. - */ -static void async_mode(SLMP_INFO *info) -{ - - unsigned char RegValue; - - tx_stop(info); - rx_stop(info); - - /* MD0, Mode Register 0 - * - * 07..05 PRCTL<2..0>, Protocol Mode, 000=async - * 04 AUTO, Auto-enable (RTS/CTS/DCD) - * 03 Reserved, must be 0 - * 02 CRCCC, CRC Calculation, 0=disabled - * 01..00 STOP<1..0> Stop bits (00=1,10=2) - * - * 0000 0000 - */ - RegValue = 0x00; - if (info->params.stop_bits != 1) - RegValue |= BIT1; - write_reg(info, MD0, RegValue); - - /* MD1, Mode Register 1 - * - * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64 - * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5 - * 03..02 RXCHR<1..0>, rx char size - * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd - * - * 0100 0000 - */ - RegValue = 0x40; - switch (info->params.data_bits) { - case 7: RegValue |= BIT4 + BIT2; break; - case 6: RegValue |= BIT5 + BIT3; break; - case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break; - } - if (info->params.parity != ASYNC_PARITY_NONE) { - RegValue |= BIT1; - if (info->params.parity == ASYNC_PARITY_ODD) - RegValue |= BIT0; - } - write_reg(info, MD1, RegValue); - - /* MD2, Mode Register 2 - * - * 07..02 Reserved, must be 0 - * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback - * - * 0000 0000 - */ - RegValue = 0x00; - if (info->params.loopback) - RegValue |= (BIT1 + BIT0); - write_reg(info, MD2, RegValue); - - /* RXS, Receive clock source - * - * 07 Reserved, must be 0 - * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL - * 03..00 RXBR<3..0>, rate divisor, 0000=1 - */ - RegValue=BIT6; - write_reg(info, RXS, RegValue); - - /* TXS, Transmit clock source - * - * 07 Reserved, must be 0 - * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock - * 03..00 RXBR<3..0>, rate divisor, 0000=1 - */ - RegValue=BIT6; - write_reg(info, TXS, RegValue); - - /* Control Register - * - * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out - */ - info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); - write_control_reg(info); - - tx_set_idle(info); - - /* RRC Receive Ready Control 0 - * - * 07..05 Reserved, must be 0 - * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte - */ - write_reg(info, RRC, 0x00); - - /* TRC0 Transmit Ready Control 0 - * - * 07..05 Reserved, must be 0 - * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes - */ - write_reg(info, TRC0, 0x10); - - /* TRC1 Transmit Ready Control 1 - * - * 07..05 Reserved, must be 0 - * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1) - */ - write_reg(info, TRC1, 0x1e); - - /* CTL, MSCI control register - * - * 07..06 Reserved, set to 0 - * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) - * 04 IDLC, idle control, 0=mark 1=idle register - * 03 BRK, break, 0=off 1 =on (async) - * 02 SYNCLD, sync char load enable (BSC) 1=enabled - * 01 GOP, go active on poll (LOOP mode) 1=enabled - * 00 RTS, RTS output control, 0=active 1=inactive - * - * 0001 0001 - */ - RegValue = 0x10; - if (!(info->serial_signals & SerialSignal_RTS)) - RegValue |= 0x01; - write_reg(info, CTL, RegValue); - - /* enable status interrupts */ - info->ie0_value |= TXINTE + RXINTE; - write_reg(info, IE0, info->ie0_value); - - /* enable break detect interrupt */ - info->ie1_value = BRKD; - write_reg(info, IE1, info->ie1_value); - - /* enable rx overrun interrupt */ - info->ie2_value = OVRN; - write_reg(info, IE2, info->ie2_value); - - set_rate( info, info->params.data_rate * 16 ); -} - -/* Program the SCA for HDLC communications. - */ -static void hdlc_mode(SLMP_INFO *info) -{ - unsigned char RegValue; - u32 DpllDivisor; - - // Can't use DPLL because SCA outputs recovered clock on RxC when - // DPLL mode selected. This causes output contention with RxC receiver. - // Use of DPLL would require external hardware to disable RxC receiver - // when DPLL mode selected. - info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL); - - /* disable DMA interrupts */ - write_reg(info, TXDMA + DIR, 0); - write_reg(info, RXDMA + DIR, 0); - - /* MD0, Mode Register 0 - * - * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC - * 04 AUTO, Auto-enable (RTS/CTS/DCD) - * 03 Reserved, must be 0 - * 02 CRCCC, CRC Calculation, 1=enabled - * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16 - * 00 CRC0, CRC initial value, 1 = all 1s - * - * 1000 0001 - */ - RegValue = 0x81; - if (info->params.flags & HDLC_FLAG_AUTO_CTS) - RegValue |= BIT4; - if (info->params.flags & HDLC_FLAG_AUTO_DCD) - RegValue |= BIT4; - if (info->params.crc_type == HDLC_CRC_16_CCITT) - RegValue |= BIT2 + BIT1; - write_reg(info, MD0, RegValue); - - /* MD1, Mode Register 1 - * - * 07..06 ADDRS<1..0>, Address detect, 00=no addr check - * 05..04 TXCHR<1..0>, tx char size, 00=8 bits - * 03..02 RXCHR<1..0>, rx char size, 00=8 bits - * 01..00 PMPM<1..0>, Parity mode, 00=no parity - * - * 0000 0000 - */ - RegValue = 0x00; - write_reg(info, MD1, RegValue); - - /* MD2, Mode Register 2 - * - * 07 NRZFM, 0=NRZ, 1=FM - * 06..05 CODE<1..0> Encoding, 00=NRZ - * 04..03 DRATE<1..0> DPLL Divisor, 00=8 - * 02 Reserved, must be 0 - * 01..00 CNCT<1..0> Channel connection, 0=normal - * - * 0000 0000 - */ - RegValue = 0x00; - switch(info->params.encoding) { - case HDLC_ENCODING_NRZI: RegValue |= BIT5; break; - case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */ - case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */ - case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */ -#if 0 - case HDLC_ENCODING_NRZB: /* not supported */ - case HDLC_ENCODING_NRZI_MARK: /* not supported */ - case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */ -#endif - } - if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) { - DpllDivisor = 16; - RegValue |= BIT3; - } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) { - DpllDivisor = 8; - } else { - DpllDivisor = 32; - RegValue |= BIT4; - } - write_reg(info, MD2, RegValue); - - - /* RXS, Receive clock source - * - * 07 Reserved, must be 0 - * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL - * 03..00 RXBR<3..0>, rate divisor, 0000=1 - */ - RegValue=0; - if (info->params.flags & HDLC_FLAG_RXC_BRG) - RegValue |= BIT6; - if (info->params.flags & HDLC_FLAG_RXC_DPLL) - RegValue |= BIT6 + BIT5; - write_reg(info, RXS, RegValue); - - /* TXS, Transmit clock source - * - * 07 Reserved, must be 0 - * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock - * 03..00 RXBR<3..0>, rate divisor, 0000=1 - */ - RegValue=0; - if (info->params.flags & HDLC_FLAG_TXC_BRG) - RegValue |= BIT6; - if (info->params.flags & HDLC_FLAG_TXC_DPLL) - RegValue |= BIT6 + BIT5; - write_reg(info, TXS, RegValue); - - if (info->params.flags & HDLC_FLAG_RXC_DPLL) - set_rate(info, info->params.clock_speed * DpllDivisor); - else - set_rate(info, info->params.clock_speed); - - /* GPDATA (General Purpose I/O Data Register) - * - * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out - */ - if (info->params.flags & HDLC_FLAG_TXC_BRG) - info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2)); - else - info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2)); - write_control_reg(info); - - /* RRC Receive Ready Control 0 - * - * 07..05 Reserved, must be 0 - * 04..00 RRC<4..0> Rx FIFO trigger active - */ - write_reg(info, RRC, rx_active_fifo_level); - - /* TRC0 Transmit Ready Control 0 - * - * 07..05 Reserved, must be 0 - * 04..00 TRC<4..0> Tx FIFO trigger active - */ - write_reg(info, TRC0, tx_active_fifo_level); - - /* TRC1 Transmit Ready Control 1 - * - * 07..05 Reserved, must be 0 - * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full) - */ - write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1)); - - /* DMR, DMA Mode Register - * - * 07..05 Reserved, must be 0 - * 04 TMOD, Transfer Mode: 1=chained-block - * 03 Reserved, must be 0 - * 02 NF, Number of Frames: 1=multi-frame - * 01 CNTE, Frame End IRQ Counter enable: 0=disabled - * 00 Reserved, must be 0 - * - * 0001 0100 - */ - write_reg(info, TXDMA + DMR, 0x14); - write_reg(info, RXDMA + DMR, 0x14); - - /* Set chain pointer base (upper 8 bits of 24 bit addr) */ - write_reg(info, RXDMA + CPB, - (unsigned char)(info->buffer_list_phys >> 16)); - - /* Set chain pointer base (upper 8 bits of 24 bit addr) */ - write_reg(info, TXDMA + CPB, - (unsigned char)(info->buffer_list_phys >> 16)); - - /* enable status interrupts. other code enables/disables - * the individual sources for these two interrupt classes. - */ - info->ie0_value |= TXINTE + RXINTE; - write_reg(info, IE0, info->ie0_value); - - /* CTL, MSCI control register - * - * 07..06 Reserved, set to 0 - * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC) - * 04 IDLC, idle control, 0=mark 1=idle register - * 03 BRK, break, 0=off 1 =on (async) - * 02 SYNCLD, sync char load enable (BSC) 1=enabled - * 01 GOP, go active on poll (LOOP mode) 1=enabled - * 00 RTS, RTS output control, 0=active 1=inactive - * - * 0001 0001 - */ - RegValue = 0x10; - if (!(info->serial_signals & SerialSignal_RTS)) - RegValue |= 0x01; - write_reg(info, CTL, RegValue); - - /* preamble not supported ! */ - - tx_set_idle(info); - tx_stop(info); - rx_stop(info); - - set_rate(info, info->params.clock_speed); - - if (info->params.loopback) - enable_loopback(info,1); -} - -/* Set the transmit HDLC idle mode - */ -static void tx_set_idle(SLMP_INFO *info) -{ - unsigned char RegValue = 0xff; - - /* Map API idle mode to SCA register bits */ - switch(info->idle_mode) { - case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break; - case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break; - case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break; - case HDLC_TXIDLE_ONES: RegValue = 0xff; break; - case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break; - case HDLC_TXIDLE_SPACE: RegValue = 0x00; break; - case HDLC_TXIDLE_MARK: RegValue = 0xff; break; - } - - write_reg(info, IDL, RegValue); -} - -/* Query the adapter for the state of the V24 status (input) signals. - */ -static void get_signals(SLMP_INFO *info) -{ - u16 status = read_reg(info, SR3); - u16 gpstatus = read_status_reg(info); - u16 testbit; - - /* clear all serial signals except RTS and DTR */ - info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR; - - /* set serial signal bits to reflect MISR */ - - if (!(status & BIT3)) - info->serial_signals |= SerialSignal_CTS; - - if ( !(status & BIT2)) - info->serial_signals |= SerialSignal_DCD; - - testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7> - if (!(gpstatus & testbit)) - info->serial_signals |= SerialSignal_RI; - - testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6> - if (!(gpstatus & testbit)) - info->serial_signals |= SerialSignal_DSR; -} - -/* Set the state of RTS and DTR based on contents of - * serial_signals member of device context. - */ -static void set_signals(SLMP_INFO *info) -{ - unsigned char RegValue; - u16 EnableBit; - - RegValue = read_reg(info, CTL); - if (info->serial_signals & SerialSignal_RTS) - RegValue &= ~BIT0; - else - RegValue |= BIT0; - write_reg(info, CTL, RegValue); - - // Port 0..3 DTR is ctrl reg <1,3,5,7> - EnableBit = BIT1 << (info->port_num*2); - if (info->serial_signals & SerialSignal_DTR) - info->port_array[0]->ctrlreg_value &= ~EnableBit; - else - info->port_array[0]->ctrlreg_value |= EnableBit; - write_control_reg(info); -} - -/*******************/ -/* DMA Buffer Code */ -/*******************/ - -/* Set the count for all receive buffers to SCABUFSIZE - * and set the current buffer to the first buffer. This effectively - * makes all buffers free and discards any data in buffers. - */ -static void rx_reset_buffers(SLMP_INFO *info) -{ - rx_free_frame_buffers(info, 0, info->rx_buf_count - 1); -} - -/* Free the buffers used by a received frame - * - * info pointer to device instance data - * first index of 1st receive buffer of frame - * last index of last receive buffer of frame - */ -static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last) -{ - bool done = false; - - while(!done) { - /* reset current buffer for reuse */ - info->rx_buf_list[first].status = 0xff; - - if (first == last) { - done = true; - /* set new last rx descriptor address */ - write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry); - } - - first++; - if (first == info->rx_buf_count) - first = 0; - } - - /* set current buffer to next buffer after last buffer of frame */ - info->current_rx_buf = first; -} - -/* Return a received frame from the receive DMA buffers. - * Only frames received without errors are returned. - * - * Return Value: true if frame returned, otherwise false - */ -static bool rx_get_frame(SLMP_INFO *info) -{ - unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ - unsigned short status; - unsigned int framesize = 0; - bool ReturnCode = false; - unsigned long flags; - struct tty_struct *tty = info->port.tty; - unsigned char addr_field = 0xff; - SCADESC *desc; - SCADESC_EX *desc_ex; - -CheckAgain: - /* assume no frame returned, set zero length */ - framesize = 0; - addr_field = 0xff; - - /* - * current_rx_buf points to the 1st buffer of the next available - * receive frame. To find the last buffer of the frame look for - * a non-zero status field in the buffer entries. (The status - * field is set by the 16C32 after completing a receive frame. - */ - StartIndex = EndIndex = info->current_rx_buf; - - for ( ;; ) { - desc = &info->rx_buf_list[EndIndex]; - desc_ex = &info->rx_buf_list_ex[EndIndex]; - - if (desc->status == 0xff) - goto Cleanup; /* current desc still in use, no frames available */ - - if (framesize == 0 && info->params.addr_filter != 0xff) - addr_field = desc_ex->virt_addr[0]; - - framesize += desc->length; - - /* Status != 0 means last buffer of frame */ - if (desc->status) - break; - - EndIndex++; - if (EndIndex == info->rx_buf_count) - EndIndex = 0; - - if (EndIndex == info->current_rx_buf) { - /* all buffers have been 'used' but none mark */ - /* the end of a frame. Reset buffers and receiver. */ - if ( info->rx_enabled ){ - spin_lock_irqsave(&info->lock,flags); - rx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } - goto Cleanup; - } - - } - - /* check status of receive frame */ - - /* frame status is byte stored after frame data - * - * 7 EOM (end of msg), 1 = last buffer of frame - * 6 Short Frame, 1 = short frame - * 5 Abort, 1 = frame aborted - * 4 Residue, 1 = last byte is partial - * 3 Overrun, 1 = overrun occurred during frame reception - * 2 CRC, 1 = CRC error detected - * - */ - status = desc->status; - - /* ignore CRC bit if not using CRC (bit is undefined) */ - /* Note:CRC is not save to data buffer */ - if (info->params.crc_type == HDLC_CRC_NONE) - status &= ~BIT2; - - if (framesize == 0 || - (addr_field != 0xff && addr_field != info->params.addr_filter)) { - /* discard 0 byte frames, this seems to occur sometime - * when remote is idling flags. - */ - rx_free_frame_buffers(info, StartIndex, EndIndex); - goto CheckAgain; - } - - if (framesize < 2) - status |= BIT6; - - if (status & (BIT6+BIT5+BIT3+BIT2)) { - /* received frame has errors, - * update counts and mark frame size as 0 - */ - if (status & BIT6) - info->icount.rxshort++; - else if (status & BIT5) - info->icount.rxabort++; - else if (status & BIT3) - info->icount.rxover++; - else - info->icount.rxcrc++; - - framesize = 0; -#if SYNCLINK_GENERIC_HDLC - { - info->netdev->stats.rx_errors++; - info->netdev->stats.rx_frame_errors++; - } -#endif - } - - if ( debug_level >= DEBUG_LEVEL_BH ) - printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n", - __FILE__,__LINE__,info->device_name,status,framesize); - - if ( debug_level >= DEBUG_LEVEL_DATA ) - trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr, - min_t(unsigned int, framesize, SCABUFSIZE), 0); - - if (framesize) { - if (framesize > info->max_frame_size) - info->icount.rxlong++; - else { - /* copy dma buffer(s) to contiguous intermediate buffer */ - int copy_count = framesize; - int index = StartIndex; - unsigned char *ptmp = info->tmp_rx_buf; - info->tmp_rx_buf_count = framesize; - - info->icount.rxok++; - - while(copy_count) { - int partial_count = min(copy_count,SCABUFSIZE); - memcpy( ptmp, - info->rx_buf_list_ex[index].virt_addr, - partial_count ); - ptmp += partial_count; - copy_count -= partial_count; - - if ( ++index == info->rx_buf_count ) - index = 0; - } - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_rx(info,info->tmp_rx_buf,framesize); - else -#endif - ldisc_receive_buf(tty,info->tmp_rx_buf, - info->flag_buf, framesize); - } - } - /* Free the buffers used by this frame. */ - rx_free_frame_buffers( info, StartIndex, EndIndex ); - - ReturnCode = true; - -Cleanup: - if ( info->rx_enabled && info->rx_overflow ) { - /* Receiver is enabled, but needs to restarted due to - * rx buffer overflow. If buffers are empty, restart receiver. - */ - if (info->rx_buf_list[EndIndex].status == 0xff) { - spin_lock_irqsave(&info->lock,flags); - rx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - } - } - - return ReturnCode; -} - -/* load the transmit DMA buffer with data - */ -static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count) -{ - unsigned short copy_count; - unsigned int i = 0; - SCADESC *desc; - SCADESC_EX *desc_ex; - - if ( debug_level >= DEBUG_LEVEL_DATA ) - trace_block(info, buf, min_t(unsigned int, count, SCABUFSIZE), 1); - - /* Copy source buffer to one or more DMA buffers, starting with - * the first transmit dma buffer. - */ - for(i=0;;) - { - copy_count = min_t(unsigned int, count, SCABUFSIZE); - - desc = &info->tx_buf_list[i]; - desc_ex = &info->tx_buf_list_ex[i]; - - load_pci_memory(info, desc_ex->virt_addr,buf,copy_count); - - desc->length = copy_count; - desc->status = 0; - - buf += copy_count; - count -= copy_count; - - if (!count) - break; - - i++; - if (i >= info->tx_buf_count) - i = 0; - } - - info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */ - info->last_tx_buf = ++i; -} - -static bool register_test(SLMP_INFO *info) -{ - static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96}; - static unsigned int count = ARRAY_SIZE(testval); - unsigned int i; - bool rc = true; - unsigned long flags; - - spin_lock_irqsave(&info->lock,flags); - reset_port(info); - - /* assume failure */ - info->init_error = DiagStatus_AddressFailure; - - /* Write bit patterns to various registers but do it out of */ - /* sync, then read back and verify values. */ - - for (i = 0 ; i < count ; i++) { - write_reg(info, TMC, testval[i]); - write_reg(info, IDL, testval[(i+1)%count]); - write_reg(info, SA0, testval[(i+2)%count]); - write_reg(info, SA1, testval[(i+3)%count]); - - if ( (read_reg(info, TMC) != testval[i]) || - (read_reg(info, IDL) != testval[(i+1)%count]) || - (read_reg(info, SA0) != testval[(i+2)%count]) || - (read_reg(info, SA1) != testval[(i+3)%count]) ) - { - rc = false; - break; - } - } - - reset_port(info); - spin_unlock_irqrestore(&info->lock,flags); - - return rc; -} - -static bool irq_test(SLMP_INFO *info) -{ - unsigned long timeout; - unsigned long flags; - - unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0; - - spin_lock_irqsave(&info->lock,flags); - reset_port(info); - - /* assume failure */ - info->init_error = DiagStatus_IrqFailure; - info->irq_occurred = false; - - /* setup timer0 on SCA0 to interrupt */ - - /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */ - write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4)); - - write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */ - write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */ - - - /* TMCS, Timer Control/Status Register - * - * 07 CMF, Compare match flag (read only) 1=match - * 06 ECMI, CMF Interrupt Enable: 1=enabled - * 05 Reserved, must be 0 - * 04 TME, Timer Enable - * 03..00 Reserved, must be 0 - * - * 0101 0000 - */ - write_reg(info, (unsigned char)(timer + TMCS), 0x50); - - spin_unlock_irqrestore(&info->lock,flags); - - timeout=100; - while( timeout-- && !info->irq_occurred ) { - msleep_interruptible(10); - } - - spin_lock_irqsave(&info->lock,flags); - reset_port(info); - spin_unlock_irqrestore(&info->lock,flags); - - return info->irq_occurred; -} - -/* initialize individual SCA device (2 ports) - */ -static bool sca_init(SLMP_INFO *info) -{ - /* set wait controller to single mem partition (low), no wait states */ - write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */ - write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */ - write_reg(info, WCRL, 0); /* wait controller low range */ - write_reg(info, WCRM, 0); /* wait controller mid range */ - write_reg(info, WCRH, 0); /* wait controller high range */ - - /* DPCR, DMA Priority Control - * - * 07..05 Not used, must be 0 - * 04 BRC, bus release condition: 0=all transfers complete - * 03 CCC, channel change condition: 0=every cycle - * 02..00 PR<2..0>, priority 100=round robin - * - * 00000100 = 0x04 - */ - write_reg(info, DPCR, dma_priority); - - /* DMA Master Enable, BIT7: 1=enable all channels */ - write_reg(info, DMER, 0x80); - - /* enable all interrupt classes */ - write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */ - write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */ - write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */ - - /* ITCR, interrupt control register - * 07 IPC, interrupt priority, 0=MSCI->DMA - * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle - * 04 VOS, Vector Output, 0=unmodified vector - * 03..00 Reserved, must be 0 - */ - write_reg(info, ITCR, 0); - - return true; -} - -/* initialize adapter hardware - */ -static bool init_adapter(SLMP_INFO *info) -{ - int i; - - /* Set BIT30 of Local Control Reg 0x50 to reset SCA */ - volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50); - u32 readval; - - info->misc_ctrl_value |= BIT30; - *MiscCtrl = info->misc_ctrl_value; - - /* - * Force at least 170ns delay before clearing - * reset bit. Each read from LCR takes at least - * 30ns so 10 times for 300ns to be safe. - */ - for(i=0;i<10;i++) - readval = *MiscCtrl; - - info->misc_ctrl_value &= ~BIT30; - *MiscCtrl = info->misc_ctrl_value; - - /* init control reg (all DTRs off, all clksel=input) */ - info->ctrlreg_value = 0xaa; - write_control_reg(info); - - { - volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c); - lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3); - - switch(read_ahead_count) - { - case 16: - lcr1_brdr_value |= BIT5 + BIT4 + BIT3; - break; - case 8: - lcr1_brdr_value |= BIT5 + BIT4; - break; - case 4: - lcr1_brdr_value |= BIT5 + BIT3; - break; - case 0: - lcr1_brdr_value |= BIT5; - break; - } - - *LCR1BRDR = lcr1_brdr_value; - *MiscCtrl = misc_ctrl_value; - } - - sca_init(info->port_array[0]); - sca_init(info->port_array[2]); - - return true; -} - -/* Loopback an HDLC frame to test the hardware - * interrupt and DMA functions. - */ -static bool loopback_test(SLMP_INFO *info) -{ -#define TESTFRAMESIZE 20 - - unsigned long timeout; - u16 count = TESTFRAMESIZE; - unsigned char buf[TESTFRAMESIZE]; - bool rc = false; - unsigned long flags; - - struct tty_struct *oldtty = info->port.tty; - u32 speed = info->params.clock_speed; - - info->params.clock_speed = 3686400; - info->port.tty = NULL; - - /* assume failure */ - info->init_error = DiagStatus_DmaFailure; - - /* build and send transmit frame */ - for (count = 0; count < TESTFRAMESIZE;++count) - buf[count] = (unsigned char)count; - - memset(info->tmp_rx_buf,0,TESTFRAMESIZE); - - /* program hardware for HDLC and enabled receiver */ - spin_lock_irqsave(&info->lock,flags); - hdlc_mode(info); - enable_loopback(info,1); - rx_start(info); - info->tx_count = count; - tx_load_dma_buffer(info,buf,count); - tx_start(info); - spin_unlock_irqrestore(&info->lock,flags); - - /* wait for receive complete */ - /* Set a timeout for waiting for interrupt. */ - for ( timeout = 100; timeout; --timeout ) { - msleep_interruptible(10); - - if (rx_get_frame(info)) { - rc = true; - break; - } - } - - /* verify received frame length and contents */ - if (rc && - ( info->tmp_rx_buf_count != count || - memcmp(buf, info->tmp_rx_buf,count))) { - rc = false; - } - - spin_lock_irqsave(&info->lock,flags); - reset_adapter(info); - spin_unlock_irqrestore(&info->lock,flags); - - info->params.clock_speed = speed; - info->port.tty = oldtty; - - return rc; -} - -/* Perform diagnostics on hardware - */ -static int adapter_test( SLMP_INFO *info ) -{ - unsigned long flags; - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):Testing device %s\n", - __FILE__,__LINE__,info->device_name ); - - spin_lock_irqsave(&info->lock,flags); - init_adapter(info); - spin_unlock_irqrestore(&info->lock,flags); - - info->port_array[0]->port_count = 0; - - if ( register_test(info->port_array[0]) && - register_test(info->port_array[1])) { - - info->port_array[0]->port_count = 2; - - if ( register_test(info->port_array[2]) && - register_test(info->port_array[3]) ) - info->port_array[0]->port_count += 2; - } - else { - printk( "%s(%d):Register test failure for device %s Addr=%08lX\n", - __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base)); - return -ENODEV; - } - - if ( !irq_test(info->port_array[0]) || - !irq_test(info->port_array[1]) || - (info->port_count == 4 && !irq_test(info->port_array[2])) || - (info->port_count == 4 && !irq_test(info->port_array[3]))) { - printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", - __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); - return -ENODEV; - } - - if (!loopback_test(info->port_array[0]) || - !loopback_test(info->port_array[1]) || - (info->port_count == 4 && !loopback_test(info->port_array[2])) || - (info->port_count == 4 && !loopback_test(info->port_array[3]))) { - printk( "%s(%d):DMA test failure for device %s\n", - __FILE__,__LINE__,info->device_name); - return -ENODEV; - } - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):device %s passed diagnostics\n", - __FILE__,__LINE__,info->device_name ); - - info->port_array[0]->init_error = 0; - info->port_array[1]->init_error = 0; - if ( info->port_count > 2 ) { - info->port_array[2]->init_error = 0; - info->port_array[3]->init_error = 0; - } - - return 0; -} - -/* Test the shared memory on a PCI adapter. - */ -static bool memory_test(SLMP_INFO *info) -{ - static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa, - 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; - unsigned long count = ARRAY_SIZE(testval); - unsigned long i; - unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long); - unsigned long * addr = (unsigned long *)info->memory_base; - - /* Test data lines with test pattern at one location. */ - - for ( i = 0 ; i < count ; i++ ) { - *addr = testval[i]; - if ( *addr != testval[i] ) - return false; - } - - /* Test address lines with incrementing pattern over */ - /* entire address range. */ - - for ( i = 0 ; i < limit ; i++ ) { - *addr = i * 4; - addr++; - } - - addr = (unsigned long *)info->memory_base; - - for ( i = 0 ; i < limit ; i++ ) { - if ( *addr != i * 4 ) - return false; - addr++; - } - - memset( info->memory_base, 0, SCA_MEM_SIZE ); - return true; -} - -/* Load data into PCI adapter shared memory. - * - * The PCI9050 releases control of the local bus - * after completing the current read or write operation. - * - * While the PCI9050 write FIFO not empty, the - * PCI9050 treats all of the writes as a single transaction - * and does not release the bus. This causes DMA latency problems - * at high speeds when copying large data blocks to the shared memory. - * - * This function breaks a write into multiple transations by - * interleaving a read which flushes the write FIFO and 'completes' - * the write transation. This allows any pending DMA request to gain control - * of the local bus in a timely fasion. - */ -static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count) -{ - /* A load interval of 16 allows for 4 32-bit writes at */ - /* 136ns each for a maximum latency of 542ns on the local bus.*/ - - unsigned short interval = count / sca_pci_load_interval; - unsigned short i; - - for ( i = 0 ; i < interval ; i++ ) - { - memcpy(dest, src, sca_pci_load_interval); - read_status_reg(info); - dest += sca_pci_load_interval; - src += sca_pci_load_interval; - } - - memcpy(dest, src, count % sca_pci_load_interval); -} - -static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit) -{ - int i; - int linecount; - if (xmit) - printk("%s tx data:\n",info->device_name); - else - printk("%s rx data:\n",info->device_name); - - while(count) { - if (count > 16) - linecount = 16; - else - linecount = count; - - for(i=0;i<linecount;i++) - printk("%02X ",(unsigned char)data[i]); - for(;i<17;i++) - printk(" "); - for(i=0;i<linecount;i++) { - if (data[i]>=040 && data[i]<=0176) - printk("%c",data[i]); - else - printk("."); - } - printk("\n"); - - data += linecount; - count -= linecount; - } -} /* end of trace_block() */ - -/* called when HDLC frame times out - * update stats and do tx completion processing - */ -static void tx_timeout(struct timer_list *t) -{ - SLMP_INFO *info = from_timer(info, t, tx_timer); - unsigned long flags; - - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):%s tx_timeout()\n", - __FILE__,__LINE__,info->device_name); - if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { - info->icount.txtimeout++; - } - spin_lock_irqsave(&info->lock,flags); - info->tx_active = false; - info->tx_count = info->tx_put = info->tx_get = 0; - - spin_unlock_irqrestore(&info->lock,flags); - -#if SYNCLINK_GENERIC_HDLC - if (info->netcount) - hdlcdev_tx_done(info); - else -#endif - bh_transmit(info); -} - -/* called to periodically check the DSR/RI modem signal input status - */ -static void status_timeout(struct timer_list *t) -{ - u16 status = 0; - SLMP_INFO *info = from_timer(info, t, status_timer); - unsigned long flags; - unsigned char delta; - - - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); - - /* check for DSR/RI state change */ - - delta = info->old_signals ^ info->serial_signals; - info->old_signals = info->serial_signals; - - if (delta & SerialSignal_DSR) - status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR); - - if (delta & SerialSignal_RI) - status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI); - - if (delta & SerialSignal_DCD) - status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD); - - if (delta & SerialSignal_CTS) - status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS); - - if (status) - isr_io_pin(info,status); - - mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10)); -} - - -/* Register Access Routines - - * All registers are memory mapped - */ -#define CALC_REGADDR() \ - unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \ - if (info->port_num > 1) \ - RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \ - if ( info->port_num & 1) { \ - if (Addr > 0x7f) \ - RegAddr += 0x40; /* DMA access */ \ - else if (Addr > 0x1f && Addr < 0x60) \ - RegAddr += 0x20; /* MSCI access */ \ - } - - -static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr) -{ - CALC_REGADDR(); - return *RegAddr; -} -static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value) -{ - CALC_REGADDR(); - *RegAddr = Value; -} - -static u16 read_reg16(SLMP_INFO * info, unsigned char Addr) -{ - CALC_REGADDR(); - return *((u16 *)RegAddr); -} - -static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value) -{ - CALC_REGADDR(); - *((u16 *)RegAddr) = Value; -} - -static unsigned char read_status_reg(SLMP_INFO * info) -{ - unsigned char *RegAddr = (unsigned char *)info->statctrl_base; - return *RegAddr; -} - -static void write_control_reg(SLMP_INFO * info) -{ - unsigned char *RegAddr = (unsigned char *)info->statctrl_base; - *RegAddr = info->port_array[0]->ctrlreg_value; -} - - -static int synclinkmp_init_one (struct pci_dev *dev, - const struct pci_device_id *ent) -{ - if (pci_enable_device(dev)) { - printk("error enabling pci device %p\n", dev); - return -EIO; - } - return device_init( ++synclinkmp_adapter_count, dev ); -} - -static void synclinkmp_remove_one (struct pci_dev *dev) -{ -} diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c index 9f906a5b8e81..32898aabcd06 100644 --- a/drivers/tty/tty_audit.c +++ b/drivers/tty/tty_audit.c @@ -81,7 +81,7 @@ static void tty_audit_log(const char *description, dev_t dev, } } -/** +/* * tty_audit_buf_push - Push buffered data out * * Generate an audit message from the contents of @buf, which is owned by @@ -120,7 +120,7 @@ void tty_audit_exit(void) tty_audit_buf_free(buf); } -/** +/* * tty_audit_fork - Copy TTY audit state for a new task * * Set up TTY audit state in @sig from current. @sig needs no locking. @@ -130,7 +130,7 @@ void tty_audit_fork(struct signal_struct *sig) sig->audit_tty = current->signal->audit_tty; } -/** +/* * tty_audit_tiocsti - Log TIOCSTI */ void tty_audit_tiocsti(struct tty_struct *tty, char ch) @@ -145,7 +145,7 @@ void tty_audit_tiocsti(struct tty_struct *tty, char ch) tty_audit_log("ioctl=TIOCSTI", dev, &ch, 1); } -/** +/* * tty_audit_push - Flush current's pending audit data * * Returns 0 if success, -EPERM if tty audit is disabled @@ -166,7 +166,7 @@ int tty_audit_push(void) return 0; } -/** +/* * tty_audit_buf_get - Get an audit buffer. * * Get an audit buffer, allocate it if necessary. Return %NULL @@ -193,7 +193,7 @@ static struct tty_audit_buf *tty_audit_buf_get(void) return tty_audit_buf_ref(); } -/** +/* * tty_audit_add_data - Add data for TTY auditing. * * Audit @data of @size from @tty, if necessary. diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c index 84fec3c62d6a..6551b188b736 100644 --- a/drivers/tty/tty_baudrate.c +++ b/drivers/tty/tty_baudrate.c @@ -222,6 +222,7 @@ EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate); /** * tty_encode_baud_rate - set baud rate of the tty + * @tty: terminal device * @ibaud: input baud rate * @obaud: output baud rate * diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index bd2d91546e32..6d4995a5f318 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -583,6 +583,7 @@ void tty_buffer_init(struct tty_port *port) /** * tty_buffer_set_limit - change the tty buffer memory limit * @port: tty port to change + * @limit: memory limit to set * * Change the tty buffer memory limit. * Must be called before the other tty buffer functions are used. diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 56ade99ef99f..8034489337d7 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -208,7 +208,7 @@ void tty_add_file(struct tty_struct *tty, struct file *file) spin_unlock(&tty->files_lock); } -/** +/* * tty_free_file - free file->private_data * * This shall be used only for fail path handling when tty_add_file was not @@ -514,8 +514,6 @@ static const struct file_operations hung_up_tty_fops = { static DEFINE_SPINLOCK(redirect_lock); static struct file *redirect; -extern void tty_sysctl_init(void); - /** * tty_wakeup - request more data * @tty: terminal @@ -545,6 +543,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup); /** * __tty_hangup - actual handler for hangup events * @tty: tty device + * @exit_session: if non-zero, signal all foreground group processes * * This can be called by a "kworker" kernel thread. That is process * synchronous but doesn't hold any locks, so we need to make sure we @@ -1067,7 +1066,7 @@ ssize_t redirected_tty_write(struct file *file, const char __user *buf, return tty_write(file, buf, count, ppos); } -/** +/* * tty_send_xchar - send priority character * * Send a high priority character to the tty even if stopped @@ -1145,6 +1144,7 @@ static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p) /** * tty_driver_lookup_tty() - find an existing tty, if any * @driver: the driver for the tty + * @file: file object * @idx: the minor number * * Return the tty, if found. If not found, return NULL or ERR_PTR() if the @@ -1496,6 +1496,8 @@ EXPORT_SYMBOL(tty_kref_put); /** * release_tty - release tty structure memory + * @tty: tty device release + * @idx: index of the tty device release * * Release both @tty and a possible linked partner (think pty pair), * and decrement the refcount of the backing module. @@ -2970,7 +2972,7 @@ static struct device *tty_get_device(struct tty_struct *tty) } -/** +/* * alloc_tty_struct * * This subroutine allocates and initializes a tty structure. diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index e18f318586ab..4de1c6ddb8ff 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -443,51 +443,6 @@ static int get_termio(struct tty_struct *tty, struct termio __user *termio) return 0; } - -#ifdef TCGETX - -/** - * set_termiox - set termiox fields if possible - * @tty: terminal - * @arg: termiox structure from user - * @opt: option flags for ioctl type - * - * Implement the device calling points for the SYS5 termiox ioctl - * interface in Linux - */ - -static int set_termiox(struct tty_struct *tty, void __user *arg, int opt) -{ - struct termiox tnew; - struct tty_ldisc *ld; - - if (tty->termiox == NULL) - return -EINVAL; - if (copy_from_user(&tnew, arg, sizeof(struct termiox))) - return -EFAULT; - - ld = tty_ldisc_ref(tty); - if (ld != NULL) { - if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer) - ld->ops->flush_buffer(tty); - tty_ldisc_deref(ld); - } - if (opt & TERMIOS_WAIT) { - tty_wait_until_sent(tty, 0); - if (signal_pending(current)) - return -ERESTARTSYS; - } - - down_write(&tty->termios_rwsem); - if (tty->ops->set_termiox) - tty->ops->set_termiox(tty, &tnew); - up_write(&tty->termios_rwsem); - return 0; -} - -#endif - - #ifdef TIOCGETP /* * These are deprecated, but there is limited support.. @@ -815,23 +770,11 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, return ret; #endif #ifdef TCGETX - case TCGETX: { - struct termiox ktermx; - if (real_tty->termiox == NULL) - return -EINVAL; - down_read(&real_tty->termios_rwsem); - memcpy(&ktermx, real_tty->termiox, sizeof(struct termiox)); - up_read(&real_tty->termios_rwsem); - if (copy_to_user(p, &ktermx, sizeof(struct termiox))) - ret = -EFAULT; - return ret; - } + case TCGETX: case TCSETX: - return set_termiox(real_tty, p, 0); case TCSETXW: - return set_termiox(real_tty, p, TERMIOS_WAIT); case TCSETXF: - return set_termiox(real_tty, p, TERMIOS_FLUSH); + return -EINVAL; #endif case TIOCGSOFTCAR: copy_termios(real_tty, &kterm); diff --git a/drivers/tty/tty_jobctrl.c b/drivers/tty/tty_jobctrl.c index aa6d0537b379..4b751b9285ad 100644 --- a/drivers/tty/tty_jobctrl.c +++ b/drivers/tty/tty_jobctrl.c @@ -21,6 +21,7 @@ static int is_ignored(int sig) /** * tty_check_change - check for POSIX terminal changes * @tty: tty to check + * @sig: signal to send * * If we try to write to, or set the state of, a terminal and we're * not in the foreground, send a SIGTTOU. If the signal is blocked or @@ -83,6 +84,7 @@ void proc_clear_tty(struct task_struct *p) /** * proc_set_tty - set the controlling terminal + * @tty: tty structure * * Only callable by the session leader and only if it does not already have * a controlling terminal. @@ -333,6 +335,7 @@ void no_tty(void) /** * tiocsctty - set controlling tty * @tty: tty structure + * @file: file structure used to check permissions * @arg: user argument * * This ioctl is used to manage job control. It permits a session diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index fe37ec331289..1ba74d6f5e5c 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -135,8 +135,10 @@ static void put_ldops(struct tty_ldisc_ops *ldops) raw_spin_unlock_irqrestore(&tty_ldiscs_lock, flags); } +static int tty_ldisc_autoload = IS_BUILTIN(CONFIG_LDISC_AUTOLOAD); /** * tty_ldisc_get - take a reference to an ldisc + * @tty: tty device * @disc: ldisc number * * Takes a reference to a line discipline. Deals with refcounts and @@ -155,8 +157,6 @@ static void put_ldops(struct tty_ldisc_ops *ldops) * takes tty_ldiscs_lock to guard against ldisc races */ -static int tty_ldisc_autoload = IS_BUILTIN(CONFIG_LDISC_AUTOLOAD); - static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc) { struct tty_ldisc *ld; @@ -190,7 +190,7 @@ static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc) return ld; } -/** +/* * tty_ldisc_put - release the ldisc * * Complement of tty_ldisc_get(). @@ -250,12 +250,12 @@ const struct seq_operations tty_ldiscs_seq_ops = { * Returns: NULL if the tty has been hungup and not re-opened with * a new file descriptor, otherwise valid ldisc reference * - * Note: Must not be called from an IRQ/timer context. The caller + * Note 1: Must not be called from an IRQ/timer context. The caller * must also be careful not to hold other locks that will deadlock * against a discipline change, such as an existing ldisc reference * (which we check for) * - * Note: a file_operations routine (read/poll/write) should use this + * Note 2: a file_operations routine (read/poll/write) should use this * function to wait for any ldisc lifetime events to finish. */ @@ -701,6 +701,7 @@ int tty_ldisc_reinit(struct tty_struct *tty, int disc) /** * tty_ldisc_hangup - hangup ldisc reset * @tty: tty being hung up + * @reinit: whether to re-initialise the tty * * Some tty devices reset their termios when they receive a hangup * event. In that situation we must also switch back to N_TTY properly diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index ea80bf872f54..346d20f4a486 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -623,7 +623,7 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) } EXPORT_SYMBOL(tty_port_close_end); -/** +/* * tty_port_close * * Caller holds tty lock @@ -659,7 +659,7 @@ int tty_port_install(struct tty_port *port, struct tty_driver *driver, } EXPORT_SYMBOL_GPL(tty_port_install); -/** +/* * tty_port_open * * Caller holds tty lock. diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index 5d778c0aa009..f7d015c67963 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -728,9 +728,8 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc) } EXPORT_SYMBOL(con_copy_unimap); -/** +/* * con_get_unimap - get the unicode map - * @vc: the console to read from * * Read the console unicode data for this console. Called from the ioctl * handlers. diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 78acc270e39a..52922d21a49f 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -26,36 +26,34 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/consolemap.h> -#include <linux/module.h> -#include <linux/sched/signal.h> -#include <linux/sched/debug.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/mm.h> -#include <linux/nospec.h> -#include <linux/string.h> #include <linux/init.h> -#include <linux/slab.h> -#include <linux/leds.h> - -#include <linux/kbd_kern.h> -#include <linux/kbd_diacr.h> -#include <linux/vt_kern.h> #include <linux/input.h> -#include <linux/reboot.h> -#include <linux/notifier.h> #include <linux/jiffies.h> +#include <linux/kbd_diacr.h> +#include <linux/kbd_kern.h> +#include <linux/leds.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/nospec.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/sched/debug.h> +#include <linux/sched/signal.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/tty_flip.h> +#include <linux/tty.h> #include <linux/uaccess.h> +#include <linux/vt_kern.h> #include <asm/irq_regs.h> -extern void ctrl_alt_del(void); - /* * Exported functions/variables */ -#define KBD_DEFMODE ((1 << VC_REPEAT) | (1 << VC_META)) +#define KBD_DEFMODE (BIT(VC_REPEAT) | BIT(VC_META)) #if defined(CONFIG_X86) || defined(CONFIG_PARISC) #include <asm/kbdleds.h> @@ -113,10 +111,22 @@ static struct kbd_struct kbd_table[MAX_NR_CONSOLES]; static struct kbd_struct *kbd = kbd_table; /* maximum values each key_handler can handle */ -static const int max_vals[] = { - 255, ARRAY_SIZE(func_table) - 1, ARRAY_SIZE(fn_handler) - 1, NR_PAD - 1, - NR_DEAD - 1, 255, 3, NR_SHIFT - 1, 255, NR_ASCII - 1, NR_LOCK - 1, - 255, NR_LOCK - 1, 255, NR_BRL - 1 +static const unsigned char max_vals[] = { + [ KT_LATIN ] = 255, + [ KT_FN ] = ARRAY_SIZE(func_table) - 1, + [ KT_SPEC ] = ARRAY_SIZE(fn_handler) - 1, + [ KT_PAD ] = NR_PAD - 1, + [ KT_DEAD ] = NR_DEAD - 1, + [ KT_CONS ] = 255, + [ KT_CUR ] = 3, + [ KT_SHIFT ] = NR_SHIFT - 1, + [ KT_META ] = 255, + [ KT_ASCII ] = NR_ASCII - 1, + [ KT_LOCK ] = NR_LOCK - 1, + [ KT_LETTER ] = 255, + [ KT_SLOCK ] = NR_LOCK - 1, + [ KT_DEAD2 ] = 255, + [ KT_BRL ] = NR_BRL - 1, }; static const int NR_TYPES = ARRAY_SIZE(max_vals); @@ -125,7 +135,7 @@ static struct input_handler kbd_handler; static DEFINE_SPINLOCK(kbd_event_lock); static DEFINE_SPINLOCK(led_lock); static DEFINE_SPINLOCK(func_buf_lock); /* guard 'func_buf' and friends */ -static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)]; /* keyboard key bitmap */ +static DECLARE_BITMAP(key_down, KEY_CNT); /* keyboard key bitmap */ static unsigned char shift_down[NR_SHIFT]; /* shift state counters.. */ static bool dead_key_next; @@ -134,7 +144,7 @@ static bool npadch_active; static unsigned int npadch_value; static unsigned int diacr; -static char rep; /* flag telling character repeat */ +static bool rep; /* flag telling character repeat */ static int shift_state = 0; @@ -314,12 +324,9 @@ static void put_queue(struct vc_data *vc, int ch) tty_schedule_flip(&vc->port); } -static void puts_queue(struct vc_data *vc, char *cp) +static void puts_queue(struct vc_data *vc, const char *cp) { - while (*cp) { - tty_insert_flip_char(&vc->port, *cp, 0); - cp++; - } + tty_insert_flip_string(&vc->port, cp, strlen(cp)); tty_schedule_flip(&vc->port); } @@ -455,9 +462,9 @@ static void fn_enter(struct vc_data *vc) diacr = 0; } - put_queue(vc, 13); + put_queue(vc, '\r'); if (vc_kbd_mode(kbd, VC_CRLF)) - put_queue(vc, 10); + put_queue(vc, '\n'); } static void fn_caps_toggle(struct vc_data *vc) @@ -820,7 +827,7 @@ static void k_pad(struct vc_data *vc, unsigned char value, char up_flag) put_queue(vc, pad_chars[value]); if (value == KVAL(K_PENTER) && vc_kbd_mode(kbd, VC_CRLF)) - put_queue(vc, 10); + put_queue(vc, '\n'); } static void k_shift(struct vc_data *vc, unsigned char value, char up_flag) @@ -850,9 +857,9 @@ static void k_shift(struct vc_data *vc, unsigned char value, char up_flag) shift_down[value]++; if (shift_down[value]) - shift_state |= (1 << value); + shift_state |= BIT(value); else - shift_state &= ~(1 << value); + shift_state &= ~BIT(value); /* kludge */ if (up_flag && shift_state != old_state && npadch_active) { @@ -873,7 +880,7 @@ static void k_meta(struct vc_data *vc, unsigned char value, char up_flag) put_queue(vc, '\033'); put_queue(vc, value); } else - put_queue(vc, value | 0x80); + put_queue(vc, value | BIT(7)); } static void k_ascii(struct vc_data *vc, unsigned char value, char up_flag) @@ -969,7 +976,7 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag) return; if (!up_flag) { - pressed |= 1 << (value - 1); + pressed |= BIT(value - 1); if (!brl_timeout) committing = pressed; } else if (brl_timeout) { @@ -979,7 +986,7 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag) committing = pressed; releasestart = jiffies; } - pressed &= ~(1 << (value - 1)); + pressed &= ~BIT(value - 1); if (!pressed && committing) { k_brlcommit(vc, committing, 0); committing = 0; @@ -989,7 +996,7 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag) k_brlcommit(vc, committing, 0); committing = 0; } - pressed &= ~(1 << (value - 1)); + pressed &= ~BIT(value - 1); } } @@ -1089,9 +1096,9 @@ static int kbd_update_leds_helper(struct input_handle *handle, void *data) unsigned int leds = *(unsigned int *)data; if (test_bit(EV_LED, handle->dev->evbit)) { - input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01)); - input_inject_event(handle, EV_LED, LED_NUML, !!(leds & 0x02)); - input_inject_event(handle, EV_LED, LED_CAPSL, !!(leds & 0x04)); + input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & BIT(0))); + input_inject_event(handle, EV_LED, LED_NUML, !!(leds & BIT(1))); + input_inject_event(handle, EV_LED, LED_CAPSL, !!(leds & BIT(2))); input_inject_event(handle, EV_SYN, SYN_REPORT, 0); } @@ -1249,8 +1256,14 @@ DECLARE_TASKLET_DISABLED_OLD(keyboard_tasklet, kbd_bh); defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\ (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) -#define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\ - ((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001)) +static inline bool kbd_is_hw_raw(const struct input_dev *dev) +{ + if (!test_bit(EV_MSC, dev->evbit) || !test_bit(MSC_RAW, dev->mscbit)) + return false; + + return dev->id.bustype == BUS_I8042 && + dev->id.vendor == 0x0001 && dev->id.product == 0x0001; +} static const unsigned short x86_keycodes[256] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, @@ -1335,7 +1348,10 @@ static int emulate_raw(struct vc_data *vc, unsigned int keycode, #else -#define HW_RAW(dev) 0 +static inline bool kbd_is_hw_raw(const struct input_dev *dev) +{ + return false; +} static int emulate_raw(struct vc_data *vc, unsigned int keycode, unsigned char up_flag) { @@ -1356,7 +1372,7 @@ static void kbd_rawcode(unsigned char data) put_queue(vc, data); } -static void kbd_keycode(unsigned int keycode, int down, int hw_raw) +static void kbd_keycode(unsigned int keycode, int down, bool hw_raw) { struct vc_data *vc = vc_cons[fg_console].d; unsigned short keysym, *key_map; @@ -1411,16 +1427,13 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw) put_queue(vc, keycode | (!down << 7)); } else { put_queue(vc, !down << 7); - put_queue(vc, (keycode >> 7) | 0x80); - put_queue(vc, keycode | 0x80); + put_queue(vc, (keycode >> 7) | BIT(7)); + put_queue(vc, keycode | BIT(7)); } raw_mode = true; } - if (down) - set_bit(keycode, key_down); - else - clear_bit(keycode, key_down); + assign_bit(keycode, key_down, down); if (rep && (!vc_kbd_mode(kbd, VC_REPEAT) || @@ -1471,7 +1484,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw) if (type == KT_LETTER) { type = KT_LATIN; if (vc_kbd_led(kbd, VC_CAPSLOCK)) { - key_map = key_maps[shift_final ^ (1 << KG_SHIFT)]; + key_map = key_maps[shift_final ^ BIT(KG_SHIFT)]; if (key_map) keysym = key_map[keycode]; } @@ -1501,10 +1514,11 @@ static void kbd_event(struct input_handle *handle, unsigned int event_type, /* We are called with interrupts disabled, just take the lock */ spin_lock(&kbd_event_lock); - if (event_type == EV_MSC && event_code == MSC_RAW && HW_RAW(handle->dev)) + if (event_type == EV_MSC && event_code == MSC_RAW && + kbd_is_hw_raw(handle->dev)) kbd_rawcode(value); if (event_type == EV_KEY && event_code <= KEY_MAX) - kbd_keycode(event_code, value, HW_RAW(handle->dev)); + kbd_keycode(event_code, value, kbd_is_hw_raw(handle->dev)); spin_unlock(&kbd_event_lock); @@ -1515,18 +1529,16 @@ static void kbd_event(struct input_handle *handle, unsigned int event_type, static bool kbd_match(struct input_handler *handler, struct input_dev *dev) { - int i; - if (test_bit(EV_SND, dev->evbit)) return true; if (test_bit(EV_KEY, dev->evbit)) { - for (i = KEY_RESERVED; i < BTN_MISC; i++) - if (test_bit(i, dev->keybit)) - return true; - for (i = KEY_BRL_DOT1; i <= KEY_BRL_DOT10; i++) - if (test_bit(i, dev->keybit)) - return true; + if (find_next_bit(dev->keybit, BTN_MISC, KEY_RESERVED) < + BTN_MISC) + return true; + if (find_next_bit(dev->keybit, KEY_BRL_DOT10 + 1, + KEY_BRL_DOT1) <= KEY_BRL_DOT10) + return true; } return false; @@ -1887,239 +1899,191 @@ int vt_do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc, return kc; } -#define i (tmp.kb_index) -#define s (tmp.kb_table) -#define v (tmp.kb_value) - -int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm, - int console) +static unsigned short vt_kdgkbent(unsigned char kbdmode, unsigned char idx, + unsigned char map) { - struct kbd_struct *kb = kbd_table + console; - struct kbentry tmp; - ushort *key_map, *new_map, val, ov; + unsigned short *key_map, val; unsigned long flags; - if (copy_from_user(&tmp, user_kbe, sizeof(struct kbentry))) - return -EFAULT; + /* Ensure another thread doesn't free it under us */ + spin_lock_irqsave(&kbd_event_lock, flags); + key_map = key_maps[map]; + if (key_map) { + val = U(key_map[idx]); + if (kbdmode != VC_UNICODE && KTYP(val) >= NR_TYPES) + val = K_HOLE; + } else + val = idx ? K_HOLE : K_NOSUCHMAP; + spin_unlock_irqrestore(&kbd_event_lock, flags); - if (!capable(CAP_SYS_TTY_CONFIG)) - perm = 0; + return val; +} - switch (cmd) { - case KDGKBENT: - /* Ensure another thread doesn't free it under us */ +static int vt_kdskbent(unsigned char kbdmode, unsigned char idx, + unsigned char map, unsigned short val) +{ + unsigned long flags; + unsigned short *key_map, *new_map, oldval; + + if (!idx && val == K_NOSUCHMAP) { spin_lock_irqsave(&kbd_event_lock, flags); - key_map = key_maps[s]; - if (key_map) { - val = U(key_map[i]); - if (kb->kbdmode != VC_UNICODE && KTYP(val) >= NR_TYPES) - val = K_HOLE; - } else - val = (i ? K_HOLE : K_NOSUCHMAP); - spin_unlock_irqrestore(&kbd_event_lock, flags); - return put_user(val, &user_kbe->kb_value); - case KDSKBENT: - if (!perm) - return -EPERM; - if (!i && v == K_NOSUCHMAP) { - spin_lock_irqsave(&kbd_event_lock, flags); - /* deallocate map */ - key_map = key_maps[s]; - if (s && key_map) { - key_maps[s] = NULL; - if (key_map[0] == U(K_ALLOCATED)) { - kfree(key_map); - keymap_count--; - } + /* deallocate map */ + key_map = key_maps[map]; + if (map && key_map) { + key_maps[map] = NULL; + if (key_map[0] == U(K_ALLOCATED)) { + kfree(key_map); + keymap_count--; } - spin_unlock_irqrestore(&kbd_event_lock, flags); - break; } + spin_unlock_irqrestore(&kbd_event_lock, flags); + + return 0; + } - if (KTYP(v) < NR_TYPES) { - if (KVAL(v) > max_vals[KTYP(v)]) - return -EINVAL; - } else - if (kb->kbdmode != VC_UNICODE) - return -EINVAL; + if (KTYP(val) < NR_TYPES) { + if (KVAL(val) > max_vals[KTYP(val)]) + return -EINVAL; + } else if (kbdmode != VC_UNICODE) + return -EINVAL; - /* ++Geert: non-PC keyboards may generate keycode zero */ + /* ++Geert: non-PC keyboards may generate keycode zero */ #if !defined(__mc68000__) && !defined(__powerpc__) - /* assignment to entry 0 only tests validity of args */ - if (!i) - break; + /* assignment to entry 0 only tests validity of args */ + if (!idx) + return 0; #endif - new_map = kmalloc(sizeof(plain_map), GFP_KERNEL); - if (!new_map) - return -ENOMEM; - spin_lock_irqsave(&kbd_event_lock, flags); - key_map = key_maps[s]; - if (key_map == NULL) { - int j; - - if (keymap_count >= MAX_NR_OF_USER_KEYMAPS && - !capable(CAP_SYS_RESOURCE)) { - spin_unlock_irqrestore(&kbd_event_lock, flags); - kfree(new_map); - return -EPERM; - } - key_maps[s] = new_map; - key_map = new_map; - key_map[0] = U(K_ALLOCATED); - for (j = 1; j < NR_KEYS; j++) - key_map[j] = U(K_HOLE); - keymap_count++; - } else - kfree(new_map); + new_map = kmalloc(sizeof(plain_map), GFP_KERNEL); + if (!new_map) + return -ENOMEM; - ov = U(key_map[i]); - if (v == ov) - goto out; - /* - * Attention Key. - */ - if (((ov == K_SAK) || (v == K_SAK)) && !capable(CAP_SYS_ADMIN)) { + spin_lock_irqsave(&kbd_event_lock, flags); + key_map = key_maps[map]; + if (key_map == NULL) { + int j; + + if (keymap_count >= MAX_NR_OF_USER_KEYMAPS && + !capable(CAP_SYS_RESOURCE)) { spin_unlock_irqrestore(&kbd_event_lock, flags); + kfree(new_map); return -EPERM; } - key_map[i] = U(v); - if (!s && (KTYP(ov) == KT_SHIFT || KTYP(v) == KT_SHIFT)) - do_compute_shiftstate(); -out: + key_maps[map] = new_map; + key_map = new_map; + key_map[0] = U(K_ALLOCATED); + for (j = 1; j < NR_KEYS; j++) + key_map[j] = U(K_HOLE); + keymap_count++; + } else + kfree(new_map); + + oldval = U(key_map[idx]); + if (val == oldval) + goto out; + + /* Attention Key */ + if ((oldval == K_SAK || val == K_SAK) && !capable(CAP_SYS_ADMIN)) { spin_unlock_irqrestore(&kbd_event_lock, flags); - break; + return -EPERM; } + + key_map[idx] = U(val); + if (!map && (KTYP(oldval) == KT_SHIFT || KTYP(val) == KT_SHIFT)) + do_compute_shiftstate(); +out: + spin_unlock_irqrestore(&kbd_event_lock, flags); + return 0; } -#undef i -#undef s -#undef v -/* FIXME: This one needs untangling */ -int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm) +int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm, + int console) { - struct kbsentry *kbs; - u_char *q; - int sz, fnw_sz; - int delta; - char *first_free, *fj, *fnw; - int i, j, k; - int ret; - unsigned long flags; + struct kbd_struct *kb = kbd_table + console; + struct kbentry kbe; - if (!capable(CAP_SYS_TTY_CONFIG)) - perm = 0; + if (copy_from_user(&kbe, user_kbe, sizeof(struct kbentry))) + return -EFAULT; - kbs = kmalloc(sizeof(*kbs), GFP_KERNEL); - if (!kbs) { - ret = -ENOMEM; - goto reterr; + switch (cmd) { + case KDGKBENT: + return put_user(vt_kdgkbent(kb->kbdmode, kbe.kb_index, + kbe.kb_table), + &user_kbe->kb_value); + case KDSKBENT: + if (!perm || !capable(CAP_SYS_TTY_CONFIG)) + return -EPERM; + return vt_kdskbent(kb->kbdmode, kbe.kb_index, kbe.kb_table, + kbe.kb_value); } + return 0; +} - /* we mostly copy too much here (512bytes), but who cares ;) */ - if (copy_from_user(kbs, user_kdgkb, sizeof(struct kbsentry))) { - ret = -EFAULT; - goto reterr; +static char *vt_kdskbsent(char *kbs, unsigned char cur) +{ + static DECLARE_BITMAP(is_kmalloc, MAX_NR_FUNC); + char *cur_f = func_table[cur]; + + if (cur_f && strlen(cur_f) >= strlen(kbs)) { + strcpy(cur_f, kbs); + return kbs; } - kbs->kb_string[sizeof(kbs->kb_string)-1] = '\0'; - i = array_index_nospec(kbs->kb_func, MAX_NR_FUNC); + + func_table[cur] = kbs; + + return __test_and_set_bit(cur, is_kmalloc) ? cur_f : NULL; +} + +int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm) +{ + unsigned char kb_func; + unsigned long flags; + char *kbs; + int ret; + + if (get_user(kb_func, &user_kdgkb->kb_func)) + return -EFAULT; + + kb_func = array_index_nospec(kb_func, MAX_NR_FUNC); switch (cmd) { case KDGKBSENT: { /* size should have been a struct member */ ssize_t len = sizeof(user_kdgkb->kb_string); + kbs = kmalloc(len, GFP_KERNEL); + if (!kbs) + return -ENOMEM; + spin_lock_irqsave(&func_buf_lock, flags); - len = strlcpy(kbs->kb_string, func_table[i] ? : "", len); + len = strlcpy(kbs, func_table[kb_func] ? : "", len); spin_unlock_irqrestore(&func_buf_lock, flags); - ret = copy_to_user(user_kdgkb->kb_string, kbs->kb_string, - len + 1) ? -EFAULT : 0; + ret = copy_to_user(user_kdgkb->kb_string, kbs, len + 1) ? + -EFAULT : 0; - goto reterr; + break; } case KDSKBSENT: - if (!perm) { - ret = -EPERM; - goto reterr; - } + if (!perm || !capable(CAP_SYS_TTY_CONFIG)) + return -EPERM; + + kbs = strndup_user(user_kdgkb->kb_string, + sizeof(user_kdgkb->kb_string)); + if (IS_ERR(kbs)) + return PTR_ERR(kbs); - fnw = NULL; - fnw_sz = 0; - /* race aginst other writers */ - again: spin_lock_irqsave(&func_buf_lock, flags); - q = func_table[i]; - - /* fj pointer to next entry after 'q' */ - first_free = funcbufptr + (funcbufsize - funcbufleft); - for (j = i+1; j < MAX_NR_FUNC && !func_table[j]; j++) - ; - if (j < MAX_NR_FUNC) - fj = func_table[j]; - else - fj = first_free; - /* buffer usage increase by new entry */ - delta = (q ? -strlen(q) : 1) + strlen(kbs->kb_string); - - if (delta <= funcbufleft) { /* it fits in current buf */ - if (j < MAX_NR_FUNC) { - /* make enough space for new entry at 'fj' */ - memmove(fj + delta, fj, first_free - fj); - for (k = j; k < MAX_NR_FUNC; k++) - if (func_table[k]) - func_table[k] += delta; - } - if (!q) - func_table[i] = fj; - funcbufleft -= delta; - } else { /* allocate a larger buffer */ - sz = 256; - while (sz < funcbufsize - funcbufleft + delta) - sz <<= 1; - if (fnw_sz != sz) { - spin_unlock_irqrestore(&func_buf_lock, flags); - kfree(fnw); - fnw = kmalloc(sz, GFP_KERNEL); - fnw_sz = sz; - if (!fnw) { - ret = -ENOMEM; - goto reterr; - } - goto again; - } - - if (!q) - func_table[i] = fj; - /* copy data before insertion point to new location */ - if (fj > funcbufptr) - memmove(fnw, funcbufptr, fj - funcbufptr); - for (k = 0; k < j; k++) - if (func_table[k]) - func_table[k] = fnw + (func_table[k] - funcbufptr); - - /* copy data after insertion point to new location */ - if (first_free > fj) { - memmove(fnw + (fj - funcbufptr) + delta, fj, first_free - fj); - for (k = j; k < MAX_NR_FUNC; k++) - if (func_table[k]) - func_table[k] = fnw + (func_table[k] - funcbufptr) + delta; - } - if (funcbufptr != func_buf) - kfree(funcbufptr); - funcbufptr = fnw; - funcbufleft = funcbufleft - delta + sz - funcbufsize; - funcbufsize = sz; - } - /* finally insert item itself */ - strcpy(func_table[i], kbs->kb_string); + kbs = vt_kdskbsent(kbs, kb_func); spin_unlock_irqrestore(&func_buf_lock, flags); + + ret = 0; break; } - ret = 0; -reterr: + kfree(kbs); + return ret; } diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 5f61b25a9aaa..3813c40f1b48 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -596,12 +596,12 @@ static int vt_io_ioctl(struct vc_data *vc, unsigned int cmd, void __user *up, return con_font_op(vc, &op); case PIO_CMAP: - if (!perm) + if (!perm) return -EPERM; return con_set_cmap(up); case GIO_CMAP: - return con_get_cmap(up); + return con_get_cmap(up); case PIO_FONTX: if (!perm) |