aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250/8250_exar.c5
-rw-r--r--drivers/tty/serial/Kconfig1
-rw-r--r--drivers/tty/serial/max310x.c401
-rw-r--r--drivers/tty/serial/samsung.c5
-rw-r--r--drivers/tty/serial/sc16is7xx.c8
5 files changed, 304 insertions, 116 deletions
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 93367dea4d8a..0dfe9ceb032a 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -639,6 +639,7 @@ static void exar_pci_remove(struct pci_dev *pcidev)
for (i = 0; i < priv->nr; i++)
serial8250_unregister_port(priv->line[i]);
+ /* Ensure that every init quirk is properly torn down */
if (priv->board->exit)
priv->board->exit(pcidev);
}
@@ -653,10 +654,6 @@ static int __maybe_unused exar_suspend(struct device *dev)
if (priv->line[i] >= 0)
serial8250_suspend_port(priv->line[i]);
- /* Ensure that every init quirk is properly torn down */
- if (priv->board->exit)
- priv->board->exit(pcidev);
-
return 0;
}
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a9751a83d5db..def45baec28f 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -354,6 +354,7 @@ config SERIAL_MAX310X
depends on SPI_MASTER
select SERIAL_CORE
select REGMAP_SPI if SPI_MASTER
+ select REGMAP_I2C if I2C
help
This selects support for an advanced UART from Maxim (Dallas).
Supported ICs are MAX3107, MAX3108, MAX3109, MAX14830.
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 5bf8dd6198bb..5570fd3b84e1 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -14,9 +14,10 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
@@ -72,7 +73,8 @@
#define MAX310X_GLOBALCMD_REG MAX310X_REG_1F /* Global Command (WO) */
/* Extended registers */
-#define MAX310X_REVID_EXTREG MAX310X_REG_05 /* Revision ID */
+#define MAX310X_SPI_REVID_EXTREG MAX310X_REG_05 /* Revision ID */
+#define MAX310X_I2C_REVID_EXTREG (0x25) /* Revision ID */
/* IRQ register bits */
#define MAX310X_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */
@@ -235,6 +237,14 @@
#define MAX310x_REV_MASK (0xf8)
#define MAX310X_WRITE_BIT 0x80
+/* Port startup definitions */
+#define MAX310X_PORT_STARTUP_WAIT_RETRIES 20 /* Number of retries */
+#define MAX310X_PORT_STARTUP_WAIT_DELAY_MS 10 /* Delay between retries */
+
+/* Crystal-related definitions */
+#define MAX310X_XTAL_WAIT_RETRIES 20 /* Number of retries */
+#define MAX310X_XTAL_WAIT_DELAY_MS 10 /* Delay between retries */
+
/* MAX3107 specific */
#define MAX3107_REV_ID (0xa0)
@@ -245,7 +255,17 @@
#define MAX14830_BRGCFG_CLKDIS_BIT (1 << 6) /* Clock Disable */
#define MAX14830_REV_ID (0xb0)
+struct max310x_if_cfg {
+ int (*extended_reg_enable)(struct device *dev, bool enable);
+
+ unsigned int rev_id_reg;
+};
+
struct max310x_devtype {
+ struct {
+ unsigned short min;
+ unsigned short max;
+ } slave_addr;
char name[9];
int nr;
u8 mode1;
@@ -258,16 +278,16 @@ struct max310x_one {
struct work_struct tx_work;
struct work_struct md_work;
struct work_struct rs_work;
+ struct regmap *regmap;
- u8 wr_header;
- u8 rd_header;
u8 rx_buf[MAX310X_FIFO_SIZE];
};
#define to_max310x_port(_port) \
container_of(_port, struct max310x_one, port)
struct max310x_port {
- struct max310x_devtype *devtype;
+ const struct max310x_devtype *devtype;
+ const struct max310x_if_cfg *if_cfg;
struct regmap *regmap;
struct clk *clk;
#ifdef CONFIG_GPIOLIB
@@ -289,26 +309,26 @@ static DECLARE_BITMAP(max310x_lines, MAX310X_UART_NRMAX);
static u8 max310x_port_read(struct uart_port *port, u8 reg)
{
- struct max310x_port *s = dev_get_drvdata(port->dev);
+ struct max310x_one *one = to_max310x_port(port);
unsigned int val = 0;
- regmap_read(s->regmap, port->iobase + reg, &val);
+ regmap_read(one->regmap, reg, &val);
return val;
}
static void max310x_port_write(struct uart_port *port, u8 reg, u8 val)
{
- struct max310x_port *s = dev_get_drvdata(port->dev);
+ struct max310x_one *one = to_max310x_port(port);
- regmap_write(s->regmap, port->iobase + reg, val);
+ regmap_write(one->regmap, reg, val);
}
static void max310x_port_update(struct uart_port *port, u8 reg, u8 mask, u8 val)
{
- struct max310x_port *s = dev_get_drvdata(port->dev);
+ struct max310x_one *one = to_max310x_port(port);
- regmap_update_bits(s->regmap, port->iobase + reg, mask, val);
+ regmap_update_bits(one->regmap, reg, mask, val);
}
static int max3107_detect(struct device *dev)
@@ -357,13 +377,12 @@ static int max3109_detect(struct device *dev)
unsigned int val = 0;
int ret;
- ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG,
- MAX310X_EXTREG_ENBL);
+ ret = s->if_cfg->extended_reg_enable(dev, true);
if (ret)
return ret;
- regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val);
- regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL);
+ regmap_read(s->regmap, s->if_cfg->rev_id_reg, &val);
+ s->if_cfg->extended_reg_enable(dev, false);
if (((val & MAX310x_REV_MASK) != MAX3109_REV_ID)) {
dev_err(dev,
"%s ID 0x%02x does not match\n", s->devtype->name, val);
@@ -388,13 +407,12 @@ static int max14830_detect(struct device *dev)
unsigned int val = 0;
int ret;
- ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG,
- MAX310X_EXTREG_ENBL);
+ ret = s->if_cfg->extended_reg_enable(dev, true);
if (ret)
return ret;
- regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val);
- regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL);
+ regmap_read(s->regmap, s->if_cfg->rev_id_reg, &val);
+ s->if_cfg->extended_reg_enable(dev, false);
if (((val & MAX310x_REV_MASK) != MAX14830_REV_ID)) {
dev_err(dev,
"%s ID 0x%02x does not match\n", s->devtype->name, val);
@@ -419,6 +437,10 @@ static const struct max310x_devtype max3107_devtype = {
.mode1 = MAX310X_MODE1_AUTOSLEEP_BIT | MAX310X_MODE1_IRQSEL_BIT,
.detect = max3107_detect,
.power = max310x_power,
+ .slave_addr = {
+ .min = 0x2c,
+ .max = 0x2f,
+ },
};
static const struct max310x_devtype max3108_devtype = {
@@ -427,6 +449,10 @@ static const struct max310x_devtype max3108_devtype = {
.mode1 = MAX310X_MODE1_AUTOSLEEP_BIT,
.detect = max3108_detect,
.power = max310x_power,
+ .slave_addr = {
+ .min = 0x60,
+ .max = 0x6f,
+ },
};
static const struct max310x_devtype max3109_devtype = {
@@ -435,6 +461,10 @@ static const struct max310x_devtype max3109_devtype = {
.mode1 = MAX310X_MODE1_AUTOSLEEP_BIT,
.detect = max3109_detect,
.power = max310x_power,
+ .slave_addr = {
+ .min = 0x60,
+ .max = 0x6f,
+ },
};
static const struct max310x_devtype max14830_devtype = {
@@ -443,11 +473,15 @@ static const struct max310x_devtype max14830_devtype = {
.mode1 = MAX310X_MODE1_IRQSEL_BIT,
.detect = max14830_detect,
.power = max14830_power,
+ .slave_addr = {
+ .min = 0x60,
+ .max = 0x6f,
+ },
};
static bool max310x_reg_writeable(struct device *dev, unsigned int reg)
{
- switch (reg & 0x1f) {
+ switch (reg) {
case MAX310X_IRQSTS_REG:
case MAX310X_LSR_IRQSTS_REG:
case MAX310X_SPCHR_IRQSTS_REG:
@@ -464,7 +498,7 @@ static bool max310x_reg_writeable(struct device *dev, unsigned int reg)
static bool max310x_reg_volatile(struct device *dev, unsigned int reg)
{
- switch (reg & 0x1f) {
+ switch (reg) {
case MAX310X_RHR_REG:
case MAX310X_IRQSTS_REG:
case MAX310X_LSR_IRQSTS_REG:
@@ -486,7 +520,7 @@ static bool max310x_reg_volatile(struct device *dev, unsigned int reg)
static bool max310x_reg_precious(struct device *dev, unsigned int reg)
{
- switch (reg & 0x1f) {
+ switch (reg) {
case MAX310X_RHR_REG:
case MAX310X_IRQSTS_REG:
case MAX310X_SPCHR_IRQSTS_REG:
@@ -499,6 +533,11 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg)
return false;
}
+static bool max310x_reg_noinc(struct device *dev, unsigned int reg)
+{
+ return reg == MAX310X_RHR_REG;
+}
+
static int max310x_set_baud(struct uart_port *port, int baud)
{
unsigned int mode = 0, div = 0, frac = 0, c = 0, F = 0;
@@ -552,7 +591,7 @@ static int max310x_update_best_err(unsigned long f, long *besterr)
return 1;
}
-static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
+static s32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
unsigned long freq, bool xtal)
{
unsigned int div, clksrc, pllcfg = 0;
@@ -610,45 +649,37 @@ static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
/* Wait for crystal */
if (xtal) {
- unsigned int val;
- msleep(10);
- regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val);
- if (!(val & MAX310X_STS_CLKREADY_BIT)) {
- dev_warn(dev, "clock is not stable yet\n");
- }
+ bool stable = false;
+ unsigned int try = 0, val = 0;
+
+ do {
+ msleep(MAX310X_XTAL_WAIT_DELAY_MS);
+ regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val);
+
+ if (val & MAX310X_STS_CLKREADY_BIT)
+ stable = true;
+ } while (!stable && (++try < MAX310X_XTAL_WAIT_RETRIES));
+
+ if (!stable)
+ return dev_err_probe(dev, -EAGAIN,
+ "clock is not stable\n");
}
- return (int)bestfreq;
+ return bestfreq;
}
static void max310x_batch_write(struct uart_port *port, u8 *txbuf, unsigned int len)
{
struct max310x_one *one = to_max310x_port(port);
- struct spi_transfer xfer[] = {
- {
- .tx_buf = &one->wr_header,
- .len = sizeof(one->wr_header),
- }, {
- .tx_buf = txbuf,
- .len = len,
- }
- };
- spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer));
+
+ regmap_noinc_write(one->regmap, MAX310X_THR_REG, txbuf, len);
}
static void max310x_batch_read(struct uart_port *port, u8 *rxbuf, unsigned int len)
{
struct max310x_one *one = to_max310x_port(port);
- struct spi_transfer xfer[] = {
- {
- .tx_buf = &one->rd_header,
- .len = sizeof(one->rd_header),
- }, {
- .rx_buf = rxbuf,
- .len = len,
- }
- };
- spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer));
+
+ regmap_noinc_read(one->regmap, MAX310X_RHR_REG, rxbuf, len);
}
static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen)
@@ -1250,16 +1281,18 @@ static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
}
#endif
-static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
- struct regmap *regmap, int irq)
+static int max310x_probe(struct device *dev, const struct max310x_devtype *devtype,
+ const struct max310x_if_cfg *if_cfg,
+ struct regmap *regmaps[], int irq)
{
- int i, ret, fmin, fmax, freq, uartclk;
- struct clk *clk_osc, *clk_xtal;
+ int i, ret, fmin, fmax, freq;
struct max310x_port *s;
- bool xtal = false;
+ s32 uartclk = 0;
+ bool xtal;
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
+ for (i = 0; i < devtype->nr; i++)
+ if (IS_ERR(regmaps[i]))
+ return PTR_ERR(regmaps[i]);
/* Alloc port structure */
s = devm_kzalloc(dev, struct_size(s, p, devtype->nr), GFP_KERNEL);
@@ -1268,23 +1301,20 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
return -ENOMEM;
}
- clk_osc = devm_clk_get(dev, "osc");
- clk_xtal = devm_clk_get(dev, "xtal");
- if (!IS_ERR(clk_osc)) {
- s->clk = clk_osc;
- fmin = 500000;
- fmax = 35000000;
- } else if (!IS_ERR(clk_xtal)) {
- s->clk = clk_xtal;
- fmin = 1000000;
- fmax = 4000000;
- xtal = true;
- } else if (PTR_ERR(clk_osc) == -EPROBE_DEFER ||
- PTR_ERR(clk_xtal) == -EPROBE_DEFER) {
- return -EPROBE_DEFER;
+ /* Always ask for fixed clock rate from a property. */
+ device_property_read_u32(dev, "clock-frequency", &uartclk);
+
+ s->clk = devm_clk_get_optional(dev, "osc");
+ if (IS_ERR(s->clk))
+ return PTR_ERR(s->clk);
+ if (s->clk) {
+ xtal = false;
} else {
- dev_err(dev, "Cannot get clock\n");
- return -EINVAL;
+ s->clk = devm_clk_get_optional(dev, "xtal");
+ if (IS_ERR(s->clk))
+ return PTR_ERR(s->clk);
+
+ xtal = true;
}
ret = clk_prepare_enable(s->clk);
@@ -1292,14 +1322,31 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
return ret;
freq = clk_get_rate(s->clk);
+ if (freq == 0)
+ freq = uartclk;
+ if (freq == 0) {
+ dev_err(dev, "Cannot get clock rate\n");
+ ret = -EINVAL;
+ goto out_clk;
+ }
+
+ if (xtal) {
+ fmin = 1000000;
+ fmax = 4000000;
+ } else {
+ fmin = 500000;
+ fmax = 35000000;
+ }
+
/* Check frequency limits */
if (freq < fmin || freq > fmax) {
ret = -ERANGE;
goto out_clk;
}
- s->regmap = regmap;
+ s->regmap = regmaps[0];
s->devtype = devtype;
+ s->if_cfg = if_cfg;
dev_set_drvdata(dev, s);
/* Check device to ensure we are talking to what we expect */
@@ -1308,25 +1355,38 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
goto out_clk;
for (i = 0; i < devtype->nr; i++) {
- unsigned int offs = i << 5;
+ bool started = false;
+ unsigned int try = 0, val = 0;
/* Reset port */
- regmap_write(s->regmap, MAX310X_MODE2_REG + offs,
+ regmap_write(regmaps[i], MAX310X_MODE2_REG,
MAX310X_MODE2_RST_BIT);
/* Clear port reset */
- regmap_write(s->regmap, MAX310X_MODE2_REG + offs, 0);
+ regmap_write(regmaps[i], MAX310X_MODE2_REG, 0);
/* Wait for port startup */
do {
- regmap_read(s->regmap,
- MAX310X_BRGDIVLSB_REG + offs, &ret);
- } while (ret != 0x01);
+ msleep(MAX310X_PORT_STARTUP_WAIT_DELAY_MS);
+ regmap_read(regmaps[i], MAX310X_BRGDIVLSB_REG, &val);
+
+ if (val == 0x01)
+ started = true;
+ } while (!started && (++try < MAX310X_PORT_STARTUP_WAIT_RETRIES));
+
+ if (!started) {
+ ret = dev_err_probe(dev, -EAGAIN, "port reset failed\n");
+ goto out_uart;
+ }
- regmap_write(s->regmap, MAX310X_MODE1_REG + offs,
- devtype->mode1);
+ regmap_write(regmaps[i], MAX310X_MODE1_REG, devtype->mode1);
}
uartclk = max310x_set_ref_clk(dev, s, freq, xtal);
+ if (uartclk < 0) {
+ ret = uartclk;
+ goto out_uart;
+ }
+
dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk);
for (i = 0; i < devtype->nr; i++) {
@@ -1346,11 +1406,13 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
s->p[i].port.fifosize = MAX310X_FIFO_SIZE;
s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY;
s->p[i].port.iotype = UPIO_PORT;
- s->p[i].port.iobase = i * 0x20;
+ s->p[i].port.iobase = i;
s->p[i].port.membase = (void __iomem *)~0;
s->p[i].port.uartclk = uartclk;
s->p[i].port.rs485_config = max310x_rs485_config;
s->p[i].port.ops = &max310x_ops;
+ s->p[i].regmap = regmaps[i];
+
/* Disable all interrupts */
max310x_port_write(&s->p[i].port, MAX310X_IRQEN_REG, 0);
/* Clear IRQ status register */
@@ -1361,10 +1423,6 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
INIT_WORK(&s->p[i].md_work, max310x_md_proc);
/* Initialize queue for changing RS485 mode */
INIT_WORK(&s->p[i].rs_work, max310x_rs_proc);
- /* Initialize SPI-transfer buffers */
- s->p[i].wr_header = (s->p[i].port.iobase + MAX310X_THR_REG) |
- MAX310X_WRITE_BIT;
- s->p[i].rd_header = (s->p[i].port.iobase + MAX310X_RHR_REG);
/* Register port */
ret = uart_add_one_port(&max310x_uart, &s->p[i].port);
@@ -1402,7 +1460,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
if (!ret)
return 0;
- dev_err(dev, "Unable to reguest IRQ %i\n", irq);
+ dev_err(dev, "Unable to request IRQ %i\n", irq);
out_uart:
for (i = 0; i < devtype->nr; i++) {
@@ -1451,16 +1509,35 @@ static struct regmap_config regcfg = {
.val_bits = 8,
.write_flag_mask = MAX310X_WRITE_BIT,
.cache_type = REGCACHE_RBTREE,
+ .max_register = MAX310X_REG_1F,
.writeable_reg = max310x_reg_writeable,
.volatile_reg = max310x_reg_volatile,
.precious_reg = max310x_reg_precious,
+ .writeable_noinc_reg = max310x_reg_noinc,
+ .readable_noinc_reg = max310x_reg_noinc,
+ .max_raw_read = MAX310X_FIFO_SIZE,
+ .max_raw_write = MAX310X_FIFO_SIZE,
};
#ifdef CONFIG_SPI_MASTER
+static int max310x_spi_extended_reg_enable(struct device *dev, bool enable)
+{
+ struct max310x_port *s = dev_get_drvdata(dev);
+
+ return regmap_write(s->regmap, MAX310X_GLOBALCMD_REG,
+ enable ? MAX310X_EXTREG_ENBL : MAX310X_EXTREG_DSBL);
+}
+
+static const struct max310x_if_cfg __maybe_unused max310x_spi_if_cfg = {
+ .extended_reg_enable = max310x_spi_extended_reg_enable,
+ .rev_id_reg = MAX310X_SPI_REVID_EXTREG,
+};
+
static int max310x_spi_probe(struct spi_device *spi)
{
- struct max310x_devtype *devtype;
- struct regmap *regmap;
+ const struct max310x_devtype *devtype;
+ struct regmap *regmaps[4];
+ unsigned int i;
int ret;
/* Setup SPI bus */
@@ -1471,23 +1548,18 @@ static int max310x_spi_probe(struct spi_device *spi)
if (ret)
return ret;
- if (spi->dev.of_node) {
- const struct of_device_id *of_id =
- of_match_device(max310x_dt_ids, &spi->dev);
- if (!of_id)
- return -ENODEV;
+ devtype = device_get_match_data(&spi->dev);
+ if (!devtype)
+ devtype = (struct max310x_devtype *)spi_get_device_id(spi)->driver_data;
- devtype = (struct max310x_devtype *)of_id->data;
- } else {
- const struct spi_device_id *id_entry = spi_get_device_id(spi);
-
- devtype = (struct max310x_devtype *)id_entry->driver_data;
+ for (i = 0; i < devtype->nr; i++) {
+ u8 port_mask = i * 0x20;
+ regcfg.read_flag_mask = port_mask;
+ regcfg.write_flag_mask = port_mask | MAX310X_WRITE_BIT;
+ regmaps[i] = devm_regmap_init_spi(spi, &regcfg);
}
- regcfg.max_register = devtype->nr * 0x20 - 1;
- regmap = devm_regmap_init_spi(spi, &regcfg);
-
- return max310x_probe(&spi->dev, devtype, regmap, spi->irq);
+ return max310x_probe(&spi->dev, devtype, &max310x_spi_if_cfg, regmaps, spi->irq);
}
static int max310x_spi_remove(struct spi_device *spi)
@@ -1507,7 +1579,7 @@ MODULE_DEVICE_TABLE(spi, max310x_id_table);
static struct spi_driver max310x_spi_driver = {
.driver = {
.name = MAX310X_NAME,
- .of_match_table = of_match_ptr(max310x_dt_ids),
+ .of_match_table = max310x_dt_ids,
.pm = &max310x_pm_ops,
},
.probe = max310x_spi_probe,
@@ -1516,6 +1588,101 @@ static struct spi_driver max310x_spi_driver = {
};
#endif
+#ifdef CONFIG_I2C
+static int max310x_i2c_extended_reg_enable(struct device *dev, bool enable)
+{
+ return 0;
+}
+
+static struct regmap_config regcfg_i2c = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .writeable_reg = max310x_reg_writeable,
+ .volatile_reg = max310x_reg_volatile,
+ .precious_reg = max310x_reg_precious,
+ .max_register = MAX310X_I2C_REVID_EXTREG,
+ .writeable_noinc_reg = max310x_reg_noinc,
+ .readable_noinc_reg = max310x_reg_noinc,
+ .max_raw_read = MAX310X_FIFO_SIZE,
+ .max_raw_write = MAX310X_FIFO_SIZE,
+};
+
+static const struct max310x_if_cfg max310x_i2c_if_cfg = {
+ .extended_reg_enable = max310x_i2c_extended_reg_enable,
+ .rev_id_reg = MAX310X_I2C_REVID_EXTREG,
+};
+
+static unsigned short max310x_i2c_slave_addr(unsigned short addr,
+ unsigned int nr)
+{
+ /*
+ * For MAX14830 and MAX3109, the slave address depends on what the
+ * A0 and A1 pins are tied to.
+ * See Table I2C Address Map of the datasheet.
+ * Based on that table, the following formulas were determined.
+ * UART1 - UART0 = 0x10
+ * UART2 - UART1 = 0x20 + 0x10
+ * UART3 - UART2 = 0x10
+ */
+
+ addr -= nr * 0x10;
+
+ if (nr >= 2)
+ addr -= 0x20;
+
+ return addr;
+}
+
+static int max310x_i2c_probe(struct i2c_client *client)
+{
+ const struct max310x_devtype *devtype =
+ device_get_match_data(&client->dev);
+ struct i2c_client *port_client;
+ struct regmap *regmaps[4];
+ unsigned int i;
+ u8 port_addr;
+
+ if (client->addr < devtype->slave_addr.min ||
+ client->addr > devtype->slave_addr.max)
+ return dev_err_probe(&client->dev, -EINVAL,
+ "Slave addr 0x%x outside of range [0x%x, 0x%x]\n",
+ client->addr, devtype->slave_addr.min,
+ devtype->slave_addr.max);
+
+ regmaps[0] = devm_regmap_init_i2c(client, &regcfg_i2c);
+
+ for (i = 1; i < devtype->nr; i++) {
+ port_addr = max310x_i2c_slave_addr(client->addr, i);
+ port_client = devm_i2c_new_dummy_device(&client->dev,
+ client->adapter,
+ port_addr);
+
+ regmaps[i] = devm_regmap_init_i2c(port_client, &regcfg_i2c);
+ }
+
+ return max310x_probe(&client->dev, devtype, &max310x_i2c_if_cfg,
+ regmaps, client->irq);
+}
+
+static int max310x_i2c_remove(struct i2c_client *client)
+{
+ max310x_remove(&client->dev);
+
+ return 0;
+}
+
+static struct i2c_driver max310x_i2c_driver = {
+ .driver = {
+ .name = MAX310X_NAME,
+ .of_match_table = max310x_dt_ids,
+ .pm = &max310x_pm_ops,
+ },
+ .probe_new = max310x_i2c_probe,
+ .remove = max310x_i2c_remove,
+};
+#endif
+
static int __init max310x_uart_init(void)
{
int ret;
@@ -1529,15 +1696,35 @@ static int __init max310x_uart_init(void)
#ifdef CONFIG_SPI_MASTER
ret = spi_register_driver(&max310x_spi_driver);
if (ret)
- uart_unregister_driver(&max310x_uart);
+ goto err_spi_register;
+#endif
+
+#ifdef CONFIG_I2C
+ ret = i2c_add_driver(&max310x_i2c_driver);
+ if (ret)
+ goto err_i2c_register;
+#endif
+
+ return 0;
+
+#ifdef CONFIG_I2C
+err_i2c_register:
+ spi_unregister_driver(&max310x_spi_driver);
#endif
+err_spi_register:
+ uart_unregister_driver(&max310x_uart);
+
return ret;
}
module_init(max310x_uart_init);
static void __exit max310x_uart_exit(void)
{
+#ifdef CONFIG_I2C
+ i2c_del_driver(&max310x_i2c_driver);
+#endif
+
#ifdef CONFIG_SPI_MASTER
spi_unregister_driver(&max310x_spi_driver);
#endif
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 24f9bd910166..78d97dbfc18a 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -800,11 +800,10 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
if ((ufstat & info->tx_fifomask) != 0 ||
(ufstat & info->tx_fifofull))
return 0;
-
- return 1;
+ return TIOCSER_TEMT;
}
- return s3c24xx_serial_txempty_nofifo(port);
+ return s3c24xx_serial_txempty_nofifo(port) ? TIOCSER_TEMT : 0;
}
/* no modem control lines */
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 42e1e6101485..892e27cddb0f 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -24,6 +24,7 @@
#include <linux/tty_flip.h>
#include <linux/spi/spi.h>
#include <linux/uaccess.h>
+#include <linux/units.h>
#include <uapi/linux/sched/types.h>
#define SC16IS7XX_NAME "sc16is7xx"
@@ -1412,9 +1413,12 @@ static int sc16is7xx_spi_probe(struct spi_device *spi)
/* Setup SPI bus */
spi->bits_per_word = 8;
- /* only supports mode 0 on SC16IS762 */
+ /* For all variants, only mode 0 is supported */
+ if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0)
+ return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
+
spi->mode = spi->mode ? : SPI_MODE_0;
- spi->max_speed_hz = spi->max_speed_hz ? : 15000000;
+ spi->max_speed_hz = spi->max_speed_hz ? : 4 * HZ_PER_MHZ;
ret = spi_setup(spi);
if (ret)
return ret;
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-28 00:18:45 +0000