diff options
Diffstat (limited to 'drivers/tty/serial/8250')
| -rw-r--r-- | drivers/tty/serial/8250/8250.h | 13 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_dma.c | 26 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_dwlib.c | 128 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_dwlib.h | 19 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_early.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_em.c | 4 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 146 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 31 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/Makefile | 1 |
11 files changed, 334 insertions, 39 deletions
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index ebfb0bd5bef5..b0c5f0dba6fc 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -85,7 +85,6 @@ struct serial8250_config { #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ #define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ #define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ -#define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */ #ifdef CONFIG_SERIAL_8250_SHARE_IRQ @@ -217,6 +216,13 @@ extern int serial8250_rx_dma(struct uart_8250_port *); extern void serial8250_rx_dma_flush(struct uart_8250_port *); extern int serial8250_request_dma(struct uart_8250_port *); extern void serial8250_release_dma(struct uart_8250_port *); + +static inline bool serial8250_tx_dma_running(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + + return dma && dma->tx_running; +} #else static inline int serial8250_tx_dma(struct uart_8250_port *p) { @@ -232,6 +238,11 @@ static inline int serial8250_request_dma(struct uart_8250_port *p) return -1; } static inline void serial8250_release_dma(struct uart_8250_port *p) { } + +static inline bool serial8250_tx_dma_running(struct uart_8250_port *p) +{ + return false; +} #endif static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index d2df7d71d666..a0325af2832a 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1125,6 +1125,7 @@ void serial8250_unregister_port(int line) uart->port.type = PORT_UNKNOWN; uart->port.dev = &serial8250_isa_devs->dev; uart->capabilities = 0; + serial8250_init_port(uart); serial8250_apply_quirks(uart); uart_add_one_port(&serial8250_reg, &uart->port); } else { diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index bfa1a857f3ff..c8b17070faf4 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -48,19 +48,39 @@ static void __dma_rx_complete(void *param) struct uart_8250_dma *dma = p->dma; struct tty_port *tty_port = &p->port.state->port; struct dma_tx_state state; + enum dma_status dma_status; int count; - dma->rx_running = 0; - dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + /* + * New DMA Rx can be started during the completion handler before it + * could acquire port's lock and it might still be ongoing. Don't to + * anything in such case. + */ + dma_status = dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + if (dma_status == DMA_IN_PROGRESS) + return; count = dma->rx_size - state.residue; tty_insert_flip_string(tty_port, dma->rx_buf, count); p->port.icount.rx += count; + dma->rx_running = 0; tty_flip_buffer_push(tty_port); } +static void dma_rx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + unsigned long flags; + + spin_lock_irqsave(&p->port.lock, flags); + if (dma->rx_running) + __dma_rx_complete(p); + spin_unlock_irqrestore(&p->port.lock, flags); +} + int serial8250_tx_dma(struct uart_8250_port *p) { struct uart_8250_dma *dma = p->dma; @@ -126,7 +146,7 @@ int serial8250_rx_dma(struct uart_8250_port *p) return -EBUSY; dma->rx_running = 1; - desc->callback = __dma_rx_complete; + desc->callback = dma_rx_complete; desc->callback_param = p; dma->rx_cookie = dmaengine_submit(desc); diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c new file mode 100644 index 000000000000..1cf229cca592 --- /dev/null +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Synopsys DesignWare 8250 library. */ + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/serial_8250.h> +#include <linux/serial_core.h> + +#include "8250_dwlib.h" + +/* Offsets for the DesignWare specific registers */ +#define DW_UART_DLF 0xc0 /* Divisor Latch Fraction Register */ +#define DW_UART_CPR 0xf4 /* Component Parameter Register */ +#define DW_UART_UCV 0xf8 /* UART Component Version */ + +/* Component Parameter Register bits */ +#define DW_UART_CPR_ABP_DATA_WIDTH (3 << 0) +#define DW_UART_CPR_AFCE_MODE (1 << 4) +#define DW_UART_CPR_THRE_MODE (1 << 5) +#define DW_UART_CPR_SIR_MODE (1 << 6) +#define DW_UART_CPR_SIR_LP_MODE (1 << 7) +#define DW_UART_CPR_ADDITIONAL_FEATURES (1 << 8) +#define DW_UART_CPR_FIFO_ACCESS (1 << 9) +#define DW_UART_CPR_FIFO_STAT (1 << 10) +#define DW_UART_CPR_SHADOW (1 << 11) +#define DW_UART_CPR_ENCODED_PARMS (1 << 12) +#define DW_UART_CPR_DMA_EXTRA (1 << 13) +#define DW_UART_CPR_FIFO_MODE (0xff << 16) + +/* Helper for FIFO size calculation */ +#define DW_UART_CPR_FIFO_SIZE(a) (((a >> 16) & 0xff) * 16) + +static inline u32 dw8250_readl_ext(struct uart_port *p, int offset) +{ + if (p->iotype == UPIO_MEM32BE) + return ioread32be(p->membase + offset); + return readl(p->membase + offset); +} + +static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg) +{ + if (p->iotype == UPIO_MEM32BE) + iowrite32be(reg, p->membase + offset); + else + writel(reg, p->membase + offset); +} + +/* + * divisor = div(I) + div(F) + * "I" means integer, "F" means fractional + * quot = div(I) = clk / (16 * baud) + * frac = div(F) * 2^dlf_size + * + * let rem = clk % (16 * baud) + * we have: div(F) * (16 * baud) = rem + * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud) + */ +static unsigned int dw8250_get_divisor(struct uart_port *p, unsigned int baud, + unsigned int *frac) +{ + unsigned int quot, rem, base_baud = baud * 16; + struct dw8250_port_data *d = p->private_data; + + quot = p->uartclk / base_baud; + rem = p->uartclk % base_baud; + *frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud); + + return quot; +} + +static void dw8250_set_divisor(struct uart_port *p, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + dw8250_writel_ext(p, DW_UART_DLF, quot_frac); + serial8250_do_set_divisor(p, baud, quot, quot_frac); +} + +void dw8250_setup_port(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + u32 reg, old_dlf; + + /* + * If the Component Version Register returns zero, we know that + * ADDITIONAL_FEATURES are not enabled. No need to go any further. + */ + reg = dw8250_readl_ext(p, DW_UART_UCV); + if (!reg) + return; + + dev_dbg(p->dev, "Designware UART version %c.%c%c\n", + (reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff); + + /* Preserve value written by firmware or bootloader */ + old_dlf = dw8250_readl_ext(p, DW_UART_DLF); + dw8250_writel_ext(p, DW_UART_DLF, ~0U); + reg = dw8250_readl_ext(p, DW_UART_DLF); + dw8250_writel_ext(p, DW_UART_DLF, old_dlf); + + if (reg) { + struct dw8250_port_data *d = p->private_data; + + d->dlf_size = fls(reg); + p->get_divisor = dw8250_get_divisor; + p->set_divisor = dw8250_set_divisor; + } + + reg = dw8250_readl_ext(p, DW_UART_CPR); + if (!reg) + return; + + /* Select the type based on FIFO */ + if (reg & DW_UART_CPR_FIFO_MODE) { + p->type = PORT_16550A; + p->flags |= UPF_FIXED_TYPE; + p->fifosize = DW_UART_CPR_FIFO_SIZE(reg); + up->capabilities = UART_CAP_FIFO; + } + + if (reg & DW_UART_CPR_AFCE_MODE) + up->capabilities |= UART_CAP_AFE; + + if (reg & DW_UART_CPR_SIR_MODE) + up->capabilities |= UART_CAP_IRDA; +} +EXPORT_SYMBOL_GPL(dw8250_setup_port); diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h new file mode 100644 index 000000000000..87a4db2a8aba --- /dev/null +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Synopsys DesignWare 8250 library header file. */ + +#include <linux/types.h> + +#include "8250.h" + +struct dw8250_port_data { + /* Port properties */ + int line; + + /* DMA operations */ + struct uart_8250_dma dma; + + /* Hardware configuration */ + u8 dlf_size; +}; + +void dw8250_setup_port(struct uart_port *p); diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 5cd8c36c8fcc..2acaea5f3232 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -176,6 +176,7 @@ static int __init early_omap8250_setup(struct earlycon_device *device, OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup); OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup); OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup); +OF_EARLYCON_DECLARE(omap8250, "ti,am654-uart", early_omap8250_setup); #endif diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c index 2a76e22d2ec0..5670c8a267d8 100644 --- a/drivers/tty/serial/8250/8250_em.c +++ b/drivers/tty/serial/8250/8250_em.c @@ -102,8 +102,8 @@ static int serial8250_em_probe(struct platform_device *pdev) memset(&up, 0, sizeof(up)); up.port.mapbase = regs->start; up.port.irq = irq->start; - up.port.type = PORT_UNKNOWN; - up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP; + up.port.type = PORT_16750; + up.port.flags = UPF_FIXED_PORT | UPF_IOREMAP | UPF_FIXED_TYPE; up.port.dev = &pdev->dev; up.port.private_data = priv; diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index fd9dd800e1a6..d05b155b4867 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1049,14 +1049,6 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev) return number_uarts; } -static int pci_asix_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_8250_port *port, int idx) -{ - port->bugs |= UART_BUG_PARITY; - return pci_default_setup(priv, board, port, idx); -} - /* Quatech devices have their own extra interface features */ struct quatech_feature { @@ -1648,6 +1640,8 @@ pci_wch_ch38x_setup(struct serial_private *priv, #define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530 #define PCI_VENDOR_ID_ADVANTECH 0x13fe #define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 +#define PCI_DEVICE_ID_ADVANTECH_PCI1600 0x1600 +#define PCI_DEVICE_ID_ADVANTECH_PCI1600_1611 0x1611 #define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 #define PCI_DEVICE_ID_ADVANTECH_PCI3618 0x3618 #define PCI_DEVICE_ID_ADVANTECH_PCIf618 0xf618 @@ -1681,7 +1675,6 @@ pci_wch_ch38x_setup(struct serial_private *priv, #define PCI_DEVICE_ID_WCH_CH355_4S 0x7173 #define PCI_VENDOR_ID_AGESTAR 0x5372 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 -#define PCI_VENDOR_ID_ASIX 0x9710 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e @@ -2453,16 +2446,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .setup = pci_wch_ch38x_setup, }, /* - * ASIX devices with FIFO bug - */ - { - .vendor = PCI_VENDOR_ID_ASIX, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_asix_setup, - }, - /* * Broadcom TruManage (NetXtreme) */ { @@ -3840,6 +3823,9 @@ static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one, pciserial_resume_one); static const struct pci_device_id serial_pci_tbl[] = { + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI1600, + PCI_DEVICE_ID_ADVANTECH_PCI1600_1611, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, @@ -4786,6 +4772,12 @@ static const struct pci_device_id serial_pci_tbl[] = { pbn_b1_bt_1_115200 }, /* + * IntaShield IS-100 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0D60, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + /* * IntaShield IS-200 */ { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, @@ -4812,10 +4804,14 @@ static const struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_1_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AA2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_1_115200 }, /* - * Brainboxes UC-257 + * Brainboxes UC-253/UC-734 */ - { PCI_VENDOR_ID_INTASHIELD, 0x0861, + { PCI_VENDOR_ID_INTASHIELD, 0x0CA1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_2_115200 }, @@ -4851,6 +4847,14 @@ static const struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08E2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08E3, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, /* * Brainboxes UC-310 */ @@ -4861,6 +4865,14 @@ static const struct pci_device_id serial_pci_tbl[] = { /* * Brainboxes UC-313 */ + { PCI_VENDOR_ID_INTASHIELD, 0x08A1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x08A2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, { PCI_VENDOR_ID_INTASHIELD, 0x08A3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -4875,6 +4887,10 @@ static const struct pci_device_id serial_pci_tbl[] = { /* * Brainboxes UC-346 */ + { PCI_VENDOR_ID_INTASHIELD, 0x0B01, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, { PCI_VENDOR_ID_INTASHIELD, 0x0B02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -4886,6 +4902,10 @@ static const struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0A82, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, { PCI_VENDOR_ID_INTASHIELD, 0x0A83, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -4898,13 +4918,95 @@ static const struct pci_device_id serial_pci_tbl[] = { 0, 0, pbn_b2_4_115200 }, /* - * Brainboxes UC-420/431 + * Brainboxes UC-420 */ { PCI_VENDOR_ID_INTASHIELD, 0x0921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_4_115200 }, /* + * Brainboxes UC-607 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x09A1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x09A2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x09A3, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-836 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0D41, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, + /* + * Brainboxes UP-189 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0AC1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AC2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AC3, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UP-200 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0B21, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0B22, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0B23, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UP-869 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0C01, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C02, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C03, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UP-880 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0C21, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C22, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C23, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* * Perle PCI-RAS cards */ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index ce266e10a21e..7f5d51de622d 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -19,6 +19,7 @@ #include <linux/moduleparam.h> #include <linux/ioport.h> #include <linux/init.h> +#include <linux/irq.h> #include <linux/console.h> #include <linux/sysrq.h> #include <linux/delay.h> @@ -1885,6 +1886,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) unsigned char status; unsigned long flags; struct uart_8250_port *up = up_to_u8250p(port); + struct tty_port *tport = &port->state->port; bool skip_rx = false; if (iir & UART_IIR_NO_INT) @@ -1908,6 +1910,11 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) skip_rx = true; if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) { + struct irq_data *d; + + d = irq_get_irq_data(port->irq); + if (d && irqd_is_wakeup_set(d)) + pm_wakeup_event(tport->tty->dev, 0); if (!up->dma || handle_rx_dma(up, iir)) status = serial8250_rx_chars(up, status); } @@ -1963,19 +1970,25 @@ static int serial8250_tx_threshold_handle_irq(struct uart_port *port) static unsigned int serial8250_tx_empty(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); + unsigned int result = 0; unsigned long flags; unsigned int lsr; serial8250_rpm_get(up); spin_lock_irqsave(&port->lock, flags); - lsr = serial_port_in(port, UART_LSR); - up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + if (!serial8250_tx_dma_running(up)) { + lsr = serial_port_in(port, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + + if ((lsr & BOTH_EMPTY) == BOTH_EMPTY) + result = TIOCSER_TEMT; + } spin_unlock_irqrestore(&port->lock, flags); serial8250_rpm_put(up); - return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; + return result; } unsigned int serial8250_do_get_mctrl(struct uart_port *port) @@ -2607,11 +2620,8 @@ static unsigned char serial8250_compute_lcr(struct uart_8250_port *up, if (c_cflag & CSTOPB) cval |= UART_LCR_STOP; - if (c_cflag & PARENB) { + if (c_cflag & PARENB) cval |= UART_LCR_PARITY; - if (up->bugs & UART_BUG_PARITY) - up->fifo_bug = true; - } if (!(c_cflag & PARODD)) cval |= UART_LCR_EPAR; #ifdef CMSPAR @@ -2725,8 +2735,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, up->lcr = cval; /* Save computed LCR */ if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) { - /* NOTE: If fifo_bug is not set, a user can set RX_trigger. */ - if ((baud < 2400 && !up->dma) || up->fifo_bug) { + if (baud < 2400 && !up->dma) { up->fcr &= ~UART_FCR_TRIGGER_MASK; up->fcr |= UART_FCR_TRIGGER_1; } @@ -3062,8 +3071,7 @@ static int do_set_rxtrig(struct tty_port *port, unsigned char bytes) struct uart_8250_port *up = up_to_u8250p(uport); int rxtrig; - if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1 || - up->fifo_bug) + if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1) return -EINVAL; rxtrig = bytes_to_fcr_rxtrig(up, bytes); @@ -3219,6 +3227,7 @@ void serial8250_init_port(struct uart_8250_port *up) struct uart_port *port = &up->port; spin_lock_init(&port->lock); + port->pm = NULL; port->ops = &serial8250_pops; up->cur_iotype = 0xFF; diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index a9ddd76d4170..733ac320938c 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -312,6 +312,9 @@ config SERIAL_8250_RSA If you don't have such card, or if unsure, say N. +config SERIAL_8250_DWLIB + bool + config SERIAL_8250_ACORN tristate "Acorn expansion card serial port support" depends on ARCH_ACORN && SERIAL_8250 diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 18751bc63a84..9b451d81588b 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o 8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o 8250_base-y := 8250_port.o 8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o +8250_base-$(CONFIG_SERIAL_8250_DWLIB) += 8250_dwlib.o 8250_base-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o |