aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/ast/ast_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/ast/ast_main.c')
-rw-r--r--drivers/gpu/drm/ast/ast_main.c244
1 files changed, 14 insertions, 230 deletions
diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
index f4ab40e22cea..2f3ad5f949fc 100644
--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -35,180 +35,6 @@
#include "ast_drv.h"
-static bool ast_is_vga_enabled(struct drm_device *dev)
-{
- struct ast_device *ast = to_ast_device(dev);
- u8 ch;
-
- ch = ast_io_read8(ast, AST_IO_VGAER);
-
- return !!(ch & 0x01);
-}
-
-static void ast_enable_vga(struct drm_device *dev)
-{
- struct ast_device *ast = to_ast_device(dev);
-
- ast_io_write8(ast, AST_IO_VGAER, 0x01);
- ast_io_write8(ast, AST_IO_VGAMR_W, 0x01);
-}
-
-/*
- * Run this function as part of the HW device cleanup; not
- * when the DRM device gets released.
- */
-static void ast_enable_mmio_release(void *data)
-{
- struct ast_device *ast = data;
-
- /* enable standard VGA decode */
- ast_set_index_reg(ast, AST_IO_VGACRI, 0xa1, 0x04);
-}
-
-static int ast_enable_mmio(struct ast_device *ast)
-{
- struct drm_device *dev = &ast->base;
-
- ast_set_index_reg(ast, AST_IO_VGACRI, 0xa1, 0x06);
-
- return devm_add_action_or_reset(dev->dev, ast_enable_mmio_release, ast);
-}
-
-static void ast_open_key(struct ast_device *ast)
-{
- ast_set_index_reg(ast, AST_IO_VGACRI, 0x80, 0xA8);
-}
-
-static int ast_device_config_init(struct ast_device *ast)
-{
- struct drm_device *dev = &ast->base;
- struct pci_dev *pdev = to_pci_dev(dev->dev);
- struct device_node *np = dev->dev->of_node;
- uint32_t scu_rev = 0xffffffff;
- u32 data;
- u8 jregd0, jregd1;
-
- /*
- * Find configuration mode and read SCU revision
- */
-
- ast->config_mode = ast_use_defaults;
-
- /* Check if we have device-tree properties */
- if (np && !of_property_read_u32(np, "aspeed,scu-revision-id", &data)) {
- /* We do, disable P2A access */
- ast->config_mode = ast_use_dt;
- scu_rev = data;
- } else if (pdev->device == PCI_CHIP_AST2000) { // Not all families have a P2A bridge
- /*
- * The BMC will set SCU 0x40 D[12] to 1 if the P2 bridge
- * is disabled. We force using P2A if VGA only mode bit
- * is set D[7]
- */
- jregd0 = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd0, 0xff);
- jregd1 = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, 0xff);
- if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) {
-
- /*
- * We have a P2A bridge and it is enabled.
- */
-
- /* Patch AST2500/AST2510 */
- if ((pdev->revision & 0xf0) == 0x40) {
- if (!(jregd0 & AST_VRAM_INIT_STATUS_MASK))
- ast_patch_ahb_2500(ast);
- }
-
- /* Double check that it's actually working */
- data = ast_read32(ast, 0xf004);
- if ((data != 0xffffffff) && (data != 0x00)) {
- ast->config_mode = ast_use_p2a;
-
- /* Read SCU7c (silicon revision register) */
- ast_write32(ast, 0xf004, 0x1e6e0000);
- ast_write32(ast, 0xf000, 0x1);
- scu_rev = ast_read32(ast, 0x1207c);
- }
- }
- }
-
- switch (ast->config_mode) {
- case ast_use_defaults:
- drm_info(dev, "Using default configuration\n");
- break;
- case ast_use_dt:
- drm_info(dev, "Using device-tree for configuration\n");
- break;
- case ast_use_p2a:
- drm_info(dev, "Using P2A bridge for configuration\n");
- break;
- }
-
- /*
- * Identify chipset
- */
-
- if (pdev->revision >= 0x50) {
- ast->chip = AST2600;
- drm_info(dev, "AST 2600 detected\n");
- } else if (pdev->revision >= 0x40) {
- switch (scu_rev & 0x300) {
- case 0x0100:
- ast->chip = AST2510;
- drm_info(dev, "AST 2510 detected\n");
- break;
- default:
- ast->chip = AST2500;
- drm_info(dev, "AST 2500 detected\n");
- }
- } else if (pdev->revision >= 0x30) {
- switch (scu_rev & 0x300) {
- case 0x0100:
- ast->chip = AST1400;
- drm_info(dev, "AST 1400 detected\n");
- break;
- default:
- ast->chip = AST2400;
- drm_info(dev, "AST 2400 detected\n");
- }
- } else if (pdev->revision >= 0x20) {
- switch (scu_rev & 0x300) {
- case 0x0000:
- ast->chip = AST1300;
- drm_info(dev, "AST 1300 detected\n");
- break;
- default:
- ast->chip = AST2300;
- drm_info(dev, "AST 2300 detected\n");
- break;
- }
- } else if (pdev->revision >= 0x10) {
- switch (scu_rev & 0x0300) {
- case 0x0200:
- ast->chip = AST1100;
- drm_info(dev, "AST 1100 detected\n");
- break;
- case 0x0100:
- ast->chip = AST2200;
- drm_info(dev, "AST 2200 detected\n");
- break;
- case 0x0000:
- ast->chip = AST2150;
- drm_info(dev, "AST 2150 detected\n");
- break;
- default:
- ast->chip = AST2100;
- drm_info(dev, "AST 2100 detected\n");
- break;
- }
- } else {
- ast->chip = AST2000;
- drm_info(dev, "AST 2000 detected\n");
- }
-
- return 0;
-}
-
static void ast_detect_widescreen(struct ast_device *ast)
{
u8 jreg;
@@ -424,69 +250,27 @@ static int ast_get_dram_info(struct drm_device *dev)
return 0;
}
-struct ast_device *ast_device_create(const struct drm_driver *drv,
- struct pci_dev *pdev,
- unsigned long flags)
+struct drm_device *ast_device_create(struct pci_dev *pdev,
+ const struct drm_driver *drv,
+ enum ast_chip chip,
+ enum ast_config_mode config_mode,
+ void __iomem *regs,
+ void __iomem *ioregs,
+ bool need_post)
{
struct drm_device *dev;
struct ast_device *ast;
- bool need_post = false;
- int ret = 0;
+ int ret;
ast = devm_drm_dev_alloc(&pdev->dev, drv, struct ast_device, base);
if (IS_ERR(ast))
- return ast;
+ return ERR_CAST(ast);
dev = &ast->base;
- pci_set_drvdata(pdev, dev);
-
- ret = drmm_mutex_init(dev, &ast->ioregs_lock);
- if (ret)
- return ERR_PTR(ret);
-
- ast->regs = pcim_iomap(pdev, 1, 0);
- if (!ast->regs)
- return ERR_PTR(-EIO);
-
- /*
- * After AST2500, MMIO is enabled by default, and it should be adopted
- * to be compatible with Arm.
- */
- if (pdev->revision >= 0x40) {
- ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
- } else if (!(pci_resource_flags(pdev, 2) & IORESOURCE_IO)) {
- drm_info(dev, "platform has no IO space, trying MMIO\n");
- ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
- }
-
- /* "map" IO regs if the above hasn't done so already */
- if (!ast->ioregs) {
- ast->ioregs = pcim_iomap(pdev, 2, 0);
- if (!ast->ioregs)
- return ERR_PTR(-EIO);
- }
-
- if (!ast_is_vga_enabled(dev)) {
- drm_info(dev, "VGA not enabled on entry, requesting chip POST\n");
- need_post = true;
- }
-
- /*
- * If VGA isn't enabled, we need to enable now or subsequent
- * access to the scratch registers will fail.
- */
- if (need_post)
- ast_enable_vga(dev);
-
- /* Enable extended register access */
- ast_open_key(ast);
- ret = ast_enable_mmio(ast);
- if (ret)
- return ERR_PTR(ret);
-
- ret = ast_device_config_init(ast);
- if (ret)
- return ERR_PTR(ret);
+ ast->chip = chip;
+ ast->config_mode = config_mode;
+ ast->regs = regs;
+ ast->ioregs = ioregs;
ast_detect_widescreen(ast);
ast_detect_tx_chip(ast, need_post);
@@ -517,5 +301,5 @@ struct ast_device *ast_device_create(const struct drm_driver *drv,
if (ret)
return ERR_PTR(ret);
- return ast;
+ return dev;
}
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-08 15:17:07 +0000