diff options
Diffstat (limited to 'drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_0.h')
| -rw-r--r-- | drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_0.h | 51 |
1 files changed, 37 insertions, 14 deletions
diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_0.h index b686fb68a6e7..9dd1ed5b8940 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_0.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_0.h @@ -24,8 +24,10 @@ #ifndef SMU13_DRIVER_IF_V13_0_0_H #define SMU13_DRIVER_IF_V13_0_0_H +#define SMU13_0_0_DRIVER_IF_VERSION 0x3D + //Increment this version if SkuTable_t or BoardTable_t change -#define PPTABLE_VERSION 0x26 +#define PPTABLE_VERSION 0x2B #define NUM_GFXCLK_DPM_LEVELS 16 #define NUM_SOCCLK_DPM_LEVELS 8 @@ -94,7 +96,7 @@ #define FEATURE_ATHUB_MMHUB_PG_BIT 48 #define FEATURE_SOC_PCC_BIT 49 #define FEATURE_EDC_PWRBRK_BIT 50 -#define FEATURE_SPARE_51_BIT 51 +#define FEATURE_BOMXCO_SVI3_PROG_BIT 51 #define FEATURE_SPARE_52_BIT 52 #define FEATURE_SPARE_53_BIT 53 #define FEATURE_SPARE_54_BIT 54 @@ -310,6 +312,7 @@ typedef enum { I2C_CONTROLLER_PROTOCOL_VR_IR35217, I2C_CONTROLLER_PROTOCOL_TMP_MAX31875, I2C_CONTROLLER_PROTOCOL_INA3221, + I2C_CONTROLLER_PROTOCOL_TMP_MAX6604, I2C_CONTROLLER_PROTOCOL_COUNT, } I2cControllerProtocol_e; @@ -568,6 +571,7 @@ typedef enum { } POWER_SOURCE_e; typedef enum { + MEM_VENDOR_PLACEHOLDER0, MEM_VENDOR_SAMSUNG, MEM_VENDOR_INFINEON, MEM_VENDOR_ELPIDA, @@ -577,7 +581,6 @@ typedef enum { MEM_VENDOR_MOSEL, MEM_VENDOR_WINBOND, MEM_VENDOR_ESMT, - MEM_VENDOR_PLACEHOLDER0, MEM_VENDOR_PLACEHOLDER1, MEM_VENDOR_PLACEHOLDER2, MEM_VENDOR_PLACEHOLDER3, @@ -665,7 +668,14 @@ typedef enum { #define PP_NUM_RTAVFS_PWL_ZONES 5 - +#define PP_OD_FEATURE_GFX_VF_CURVE_BIT 0 +#define PP_OD_FEATURE_PPT_BIT 2 +#define PP_OD_FEATURE_FAN_CURVE_BIT 3 +#define PP_OD_FEATURE_GFXCLK_BIT 7 +#define PP_OD_FEATURE_UCLK_BIT 8 +#define PP_OD_FEATURE_ZERO_FAN_BIT 9 +#define PP_OD_FEATURE_TEMPERATURE_BIT 10 +#define PP_OD_FEATURE_COUNT 13 // VBIOS or PPLIB configures telemetry slope and offset. Only slope expected to be set for SVI3 // Slope Q1.7, Offset Q1.2 @@ -687,10 +697,8 @@ typedef struct { //Voltage control int16_t VoltageOffsetPerZoneBoundary[PP_NUM_OD_VF_CURVE_POINTS]; - uint16_t VddGfxVmax; // in mV - uint8_t IdlePwrSavingFeaturesCtrl; - uint8_t RuntimePwrSavingFeaturesCtrl; + uint32_t Reserved; //Frequency changes int16_t GfxclkFmin; // MHz @@ -727,10 +735,9 @@ typedef struct { uint32_t FeatureCtrlMask; int16_t VoltageOffsetPerZoneBoundary; - uint16_t VddGfxVmax; // in mV + uint16_t Reserved1; - uint8_t IdlePwrSavingFeaturesCtrl; - uint8_t RuntimePwrSavingFeaturesCtrl; + uint16_t Reserved2; int16_t GfxclkFmin; // MHz int16_t GfxclkFmax; // MHz @@ -806,6 +813,9 @@ typedef enum { #define INVALID_BOARD_GPIO 0xFF +#define MARKETING_BASE_CLOCKS 0 +#define MARKETING_GAME_CLOCKS 1 +#define MARKETING_BOOST_CLOCKS 2 typedef struct { //PLL 0 @@ -1096,10 +1106,15 @@ typedef struct { uint16_t DcsExitHysteresis; //The min amount of time power credit accumulator should have a value > 0 before SMU exits the DCS throttling phase. uint16_t DcsTimeout; //This is the amount of time SMU FW waits for RLC to put GFX into GFXOFF before reverting to the fallback mechanism of throttling GFXCLK to Fmin. + uint8_t FoptEnabled; + uint8_t DcsSpare2[3]; + uint32_t DcsFoptM; //Tuning paramters to shift Fopt calculation + uint32_t DcsFoptB; //Tuning paramters to shift Fopt calculation - uint32_t DcsSpare[16]; + uint32_t DcsSpare[11]; // UCLK section + uint16_t ShadowFreqTableUclk[NUM_UCLK_DPM_LEVELS]; // In MHz uint8_t UseStrobeModeOptimizations; //Set to indicate that FW should use strobe mode optimizations uint8_t PaddingMem[3]; @@ -1245,8 +1260,13 @@ typedef struct { QuadraticInt_t qFeffCoeffBaseClock[POWER_SOURCE_COUNT]; QuadraticInt_t qFeffCoeffBoostClock[POWER_SOURCE_COUNT]; + uint16_t TemperatureLimit_Hynix; // In degrees Celsius. Memory temperature limit associated with Hynix + uint16_t TemperatureLimit_Micron; // In degrees Celsius. Memory temperature limit associated with Micron + uint16_t TemperatureFwCtfLimit_Hynix; + uint16_t TemperatureFwCtfLimit_Micron; + // SECTION: Sku Reserved - uint32_t Spare[43]; + uint32_t Spare[41]; // Padding for MMHUB - do not modify this uint32_t MmHubPadding[8]; @@ -1318,8 +1338,9 @@ typedef struct { // UCLK Spread Spectrum uint8_t UclkSpreadPercent[MEM_VENDOR_COUNT]; + uint8_t GfxclkSpreadEnable; + // FCLK Spread Spectrum - uint8_t FclkSpreadPadding; uint8_t FclkSpreadPercent; // Q4.4 uint16_t FclkSpreadFreq; // kHz @@ -1444,6 +1465,8 @@ typedef struct { uint8_t ThrottlingPercentage[THROTTLER_COUNT]; + uint8_t VmaxThrottlingPercentage; + uint8_t Padding1[3]; //metrics for D3hot entry/exit and driver ARM msgs uint32_t D3HotEntryCountPerMode[D3HOT_SEQUENCE_COUNT]; @@ -1463,7 +1486,7 @@ typedef struct { typedef struct { SmuMetrics_t SmuMetrics; - uint32_t Spare[30]; + uint32_t Spare[29]; // Padding - ignore uint32_t MmHubPadding[8]; // SMU internal use |