aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/bluetooth')
-rw-r--r--drivers/bluetooth/bcm203x.c2
-rw-r--r--drivers/bluetooth/bluecard_cs.c2
-rw-r--r--drivers/bluetooth/btintel.c59
-rw-r--r--drivers/bluetooth/btintel.h21
-rw-r--r--drivers/bluetooth/btmrvl_main.c11
-rw-r--r--drivers/bluetooth/btmrvl_sdio.c21
-rw-r--r--drivers/bluetooth/btmtksdio.c16
-rw-r--r--drivers/bluetooth/btqca.c27
-rw-r--r--drivers/bluetooth/btqca.h2
-rw-r--r--drivers/bluetooth/btusb.c303
-rw-r--r--drivers/bluetooth/hci_h5.c2
-rw-r--r--drivers/bluetooth/hci_ll.c2
-rw-r--r--drivers/bluetooth/hci_qca.c134
-rw-r--r--drivers/bluetooth/hci_serdev.c3
14 files changed, 448 insertions, 157 deletions
diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c
index 3b176257b993..e667933c3d70 100644
--- a/drivers/bluetooth/bcm203x.c
+++ b/drivers/bluetooth/bcm203x.c
@@ -106,7 +106,7 @@ static void bcm203x_complete(struct urb *urb)
}
data->state = BCM203X_LOAD_FIRMWARE;
- /* fall through */
+ fallthrough;
case BCM203X_LOAD_FIRMWARE:
if (data->fw_sent == data->fw_size) {
usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index cc6e56223656..36eabf61717f 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -295,7 +295,6 @@ static void bluecard_write_wakeup(struct bluecard_info *info)
baud_reg = REG_CONTROL_BAUD_RATE_115200;
break;
case PKT_BAUD_RATE_57600:
- /* Fall through... */
default:
baud_reg = REG_CONTROL_BAUD_RATE_57600;
break;
@@ -585,7 +584,6 @@ static int bluecard_hci_set_baud_rate(struct hci_dev *hdev, int baud)
hci_skb_pkt_type(skb) = PKT_BAUD_RATE_115200;
break;
case 57600:
- /* Fall through... */
default:
cmd[4] = 0x03;
hci_skb_pkt_type(skb) = PKT_BAUD_RATE_57600;
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 6a0e2c5a8beb..5fa5be3c5598 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -754,6 +754,65 @@ void btintel_reset_to_bootloader(struct hci_dev *hdev)
}
EXPORT_SYMBOL_GPL(btintel_reset_to_bootloader);
+int btintel_read_debug_features(struct hci_dev *hdev,
+ struct intel_debug_features *features)
+{
+ struct sk_buff *skb;
+ u8 page_no = 1;
+
+ /* Intel controller supports two pages, each page is of 128-bit
+ * feature bit mask. And each bit defines specific feature support
+ */
+ skb = __hci_cmd_sync(hdev, 0xfca6, sizeof(page_no), &page_no,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading supported features failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != (sizeof(features->page1) + 3)) {
+ bt_dev_err(hdev, "Supported features event size mismatch");
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ memcpy(features->page1, skb->data + 3, sizeof(features->page1));
+
+ /* Read the supported features page2 if required in future.
+ */
+ kfree_skb(skb);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_read_debug_features);
+
+int btintel_set_debug_features(struct hci_dev *hdev,
+ const struct intel_debug_features *features)
+{
+ u8 mask[11] = { 0x0a, 0x92, 0x02, 0x07, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00 };
+ struct sk_buff *skb;
+
+ if (!features)
+ return -EINVAL;
+
+ if (!(features->page1[0] & 0x3f)) {
+ bt_dev_info(hdev, "Telemetry exception format not supported");
+ return 0;
+ }
+
+ skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ kfree_skb(skb);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_set_debug_features);
+
MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index a69ea8a87b9b..08e20606fb58 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -62,6 +62,10 @@ struct intel_reset {
__le32 boot_param;
} __packed;
+struct intel_debug_features {
+ __u8 page1[16];
+} __packed;
+
#if IS_ENABLED(CONFIG_BT_INTEL)
int btintel_check_bdaddr(struct hci_dev *hdev);
@@ -88,6 +92,10 @@ int btintel_read_boot_params(struct hci_dev *hdev,
int btintel_download_firmware(struct hci_dev *dev, const struct firmware *fw,
u32 *boot_param);
void btintel_reset_to_bootloader(struct hci_dev *hdev);
+int btintel_read_debug_features(struct hci_dev *hdev,
+ struct intel_debug_features *features);
+int btintel_set_debug_features(struct hci_dev *hdev,
+ const struct intel_debug_features *features);
#else
static inline int btintel_check_bdaddr(struct hci_dev *hdev)
@@ -186,4 +194,17 @@ static inline int btintel_download_firmware(struct hci_dev *dev,
static inline void btintel_reset_to_bootloader(struct hci_dev *hdev)
{
}
+
+static inline int btintel_read_debug_features(struct hci_dev *hdev,
+ struct intel_debug_features *features)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline int btintel_set_debug_features(struct hci_dev *hdev,
+ const struct intel_debug_features *features)
+{
+ return -EOPNOTSUPP;
+}
+
#endif
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 708ad21683eb..8b9d78ce6bb2 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -587,6 +587,14 @@ static int btmrvl_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
return 0;
}
+static bool btmrvl_prevent_wake(struct hci_dev *hdev)
+{
+ struct btmrvl_private *priv = hci_get_drvdata(hdev);
+ struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+
+ return !device_may_wakeup(&card->func->dev);
+}
+
/*
* This function handles the event generated by firmware, rx data
* received from firmware, and tx data sent from kernel.
@@ -669,6 +677,7 @@ static int btmrvl_service_main_thread(void *data)
int btmrvl_register_hdev(struct btmrvl_private *priv)
{
struct hci_dev *hdev = NULL;
+ struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
int ret;
hdev = hci_alloc_dev();
@@ -687,6 +696,8 @@ int btmrvl_register_hdev(struct btmrvl_private *priv)
hdev->send = btmrvl_send_frame;
hdev->setup = btmrvl_setup;
hdev->set_bdaddr = btmrvl_set_bdaddr;
+ hdev->prevent_wake = btmrvl_prevent_wake;
+ SET_HCIDEV_DEV(hdev, &card->func->dev);
hdev->dev_type = priv->btmrvl_dev.dev_type;
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index a296f8526433..d15fd5be0216 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -111,6 +111,9 @@ static int btmrvl_sdio_probe_of(struct device *dev,
"Failed to request irq_bt %d (%d)\n",
cfg->irq_bt, ret);
}
+
+ /* Configure wakeup (enabled by default) */
+ device_init_wakeup(dev, true);
disable_irq(cfg->irq_bt);
}
}
@@ -328,7 +331,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
.helper = NULL,
- .firmware = "mrvl/sd8977_uapsta.bin",
+ .firmware = "mrvl/sdsd8977_combo_v2.bin",
.reg = &btmrvl_reg_8977,
.support_pscan_win_report = true,
.sd_blksz_fw_dl = 256,
@@ -346,7 +349,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8987 = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
.helper = NULL,
- .firmware = "mrvl/sd8997_uapsta.bin",
+ .firmware = "mrvl/sdsd8997_combo_v4.bin",
.reg = &btmrvl_reg_8997,
.support_pscan_win_report = true,
.sd_blksz_fw_dl = 256,
@@ -1654,6 +1657,7 @@ static void btmrvl_sdio_remove(struct sdio_func *func)
MODULE_SHUTDOWN_REQ);
btmrvl_sdio_disable_host_int(card);
}
+
BT_DBG("unregister dev");
card->priv->surprise_removed = true;
btmrvl_sdio_unregister_dev(card);
@@ -1690,7 +1694,8 @@ static int btmrvl_sdio_suspend(struct device *dev)
}
/* Enable platform specific wakeup interrupt */
- if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0) {
+ if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0 &&
+ device_may_wakeup(dev)) {
card->plt_wake_cfg->wake_by_bt = false;
enable_irq(card->plt_wake_cfg->irq_bt);
enable_irq_wake(card->plt_wake_cfg->irq_bt);
@@ -1707,7 +1712,8 @@ static int btmrvl_sdio_suspend(struct device *dev)
BT_ERR("HS not activated, suspend failed!");
/* Disable platform specific wakeup interrupt */
if (card->plt_wake_cfg &&
- card->plt_wake_cfg->irq_bt >= 0) {
+ card->plt_wake_cfg->irq_bt >= 0 &&
+ device_may_wakeup(dev)) {
disable_irq_wake(card->plt_wake_cfg->irq_bt);
disable_irq(card->plt_wake_cfg->irq_bt);
}
@@ -1767,7 +1773,8 @@ static int btmrvl_sdio_resume(struct device *dev)
hci_resume_dev(hcidev);
/* Disable platform specific wakeup interrupt */
- if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0) {
+ if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0 &&
+ device_may_wakeup(dev)) {
disable_irq_wake(card->plt_wake_cfg->irq_bt);
disable_irq(card->plt_wake_cfg->irq_bt);
if (card->plt_wake_cfg->wake_by_bt)
@@ -1831,6 +1838,6 @@ MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
-MODULE_FIRMWARE("mrvl/sd8977_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sdsd8977_combo_v2.bin");
MODULE_FIRMWARE("mrvl/sd8987_uapsta.bin");
-MODULE_FIRMWARE("mrvl/sd8997_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sdsd8997_combo_v4.bin");
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index bff095be2f97..c7ab7a23bd67 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -685,7 +685,7 @@ static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
const u8 *fw_ptr;
size_t fw_size;
int err, dlen;
- u8 flag;
+ u8 flag, param;
err = request_firmware(&fw, fwname, &hdev->dev);
if (err < 0) {
@@ -693,6 +693,20 @@ static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
return err;
}
+ /* Power on data RAM the firmware relies on. */
+ param = 1;
+ wmt_params.op = MTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 3;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = &param;
+ wmt_params.status = NULL;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to power on data RAM (%d)", err);
+ return err;
+ }
+
fw_ptr = fw->data;
fw_size = fw->size;
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index c5984966f315..ce9dcffdc5bf 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -400,6 +400,27 @@ out:
return ret;
}
+static int qca_disable_soc_logging(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ u8 cmd[2];
+ int err;
+
+ cmd[0] = QCA_DISABLE_LOGGING_SUB_OP;
+ cmd[1] = 0x00;
+ skb = __hci_cmd_sync_ev(hdev, QCA_DISABLE_LOGGING, sizeof(cmd), cmd,
+ HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "QCA Failed to disable soc logging(%d)", err);
+ return err;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+
int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
{
struct sk_buff *skb;
@@ -486,6 +507,12 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
return err;
}
+ if (soc_type >= QCA_WCN3991) {
+ err = qca_disable_soc_logging(hdev);
+ if (err < 0)
+ return err;
+ }
+
/* Perform HCI reset */
err = qca_send_reset(hdev);
if (err < 0) {
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 6e1e62dd4b95..d81b74c408a5 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -14,6 +14,7 @@
#define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
#define MAX_SIZE_PER_TLV_SEGMENT (243)
#define QCA_PRE_SHUTDOWN_CMD (0xFC08)
+#define QCA_DISABLE_LOGGING (0xFC17)
#define EDL_CMD_REQ_RES_EVT (0x00)
#define EDL_PATCH_VER_RES_EVT (0x19)
@@ -22,6 +23,7 @@
#define EDL_CMD_EXE_STATUS_EVT (0x00)
#define EDL_SET_BAUDRATE_RSP_EVT (0x92)
#define EDL_NVM_ACCESS_CODE_EVT (0x0B)
+#define QCA_DISABLE_LOGGING_SUB_OP (0x14)
#define EDL_TAG_ID_HCI (17)
#define EDL_TAG_ID_DEEP_SLEEP (27)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5f022e9cf667..8d2608ddfd08 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -359,6 +359,10 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
.driver_info = BTUSB_IGNORE },
+ /* Realtek 8822CE Bluetooth devices */
+ { USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+
/* Realtek Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
.driver_info = BTUSB_REALTEK },
@@ -453,6 +457,7 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
#define BTUSB_HW_RESET_ACTIVE 12
#define BTUSB_TX_WAIT_VND_EVT 13
#define BTUSB_WAKEUP_DISABLE 14
+#define BTUSB_USE_ALT1_FOR_WBS 15
struct btusb_data {
struct hci_dev *hdev;
@@ -511,7 +516,6 @@ struct btusb_data {
unsigned cmd_timeout_cnt;
};
-
static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
@@ -573,6 +577,23 @@ static void btusb_rtl_cmd_timeout(struct hci_dev *hdev)
gpiod_set_value_cansleep(reset_gpio, 0);
}
+static void btusb_qca_cmd_timeout(struct hci_dev *hdev)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ int err;
+
+ if (++data->cmd_timeout_cnt < 5)
+ return;
+
+ bt_dev_err(hdev, "Multiple cmd timeouts seen. Resetting usb device.");
+ /* This is not an unbalanced PM reference since the device will reset */
+ err = usb_autopm_get_interface(data->intf);
+ if (!err)
+ usb_queue_reset_device(data->intf);
+ else
+ bt_dev_err(hdev, "Failed usb_autopm_get_interface with %d", err);
+}
+
static inline void btusb_free_frags(struct btusb_data *data)
{
unsigned long flags;
@@ -1666,14 +1687,15 @@ static void btusb_work(struct work_struct *work)
new_alts = data->sco_num;
}
} else if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_TRANSP) {
-
- data->usb_alt6_packet_flow = true;
-
/* Check if Alt 6 is supported for Transparent audio */
- if (btusb_find_altsetting(data, 6))
+ if (btusb_find_altsetting(data, 6)) {
+ data->usb_alt6_packet_flow = true;
new_alts = 6;
- else
+ } else if (test_bit(BTUSB_USE_ALT1_FOR_WBS, &data->flags)) {
+ new_alts = 1;
+ } else {
bt_dev_err(hdev, "Device does not support ALT setting 6");
+ }
}
if (btusb_switch_alt_setting(hdev, new_alts) < 0)
@@ -1720,6 +1742,7 @@ static int btusb_setup_csr(struct hci_dev *hdev)
{
struct hci_rp_read_local_version *rp;
struct sk_buff *skb;
+ bool is_fake = false;
BT_DBG("%s", hdev->name);
@@ -1739,18 +1762,69 @@ static int btusb_setup_csr(struct hci_dev *hdev)
rp = (struct hci_rp_read_local_version *)skb->data;
- /* Detect controllers which aren't real CSR ones. */
+ /* Detect a wide host of Chinese controllers that aren't CSR.
+ *
+ * Known fake bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891
+ *
+ * The main thing they have in common is that these are really popular low-cost
+ * options that support newer Bluetooth versions but rely on heavy VID/PID
+ * squatting of this poor old Bluetooth 1.1 device. Even sold as such.
+ *
+ * We detect actual CSR devices by checking that the HCI manufacturer code
+ * is Cambridge Silicon Radio (10) and ensuring that LMP sub-version and
+ * HCI rev values always match. As they both store the firmware number.
+ */
if (le16_to_cpu(rp->manufacturer) != 10 ||
- le16_to_cpu(rp->lmp_subver) == 0x0c5c) {
+ le16_to_cpu(rp->hci_rev) != le16_to_cpu(rp->lmp_subver))
+ is_fake = true;
+
+ /* Known legit CSR firmware build numbers and their supported BT versions:
+ * - 1.1 (0x1) -> 0x0073, 0x020d, 0x033c, 0x034e
+ * - 1.2 (0x2) -> 0x04d9, 0x0529
+ * - 2.0 (0x3) -> 0x07a6, 0x07ad, 0x0c5c
+ * - 2.1 (0x4) -> 0x149c, 0x1735, 0x1899 (0x1899 is a BlueCore4-External)
+ * - 4.0 (0x6) -> 0x1d86, 0x2031, 0x22bb
+ *
+ * e.g. Real CSR dongles with LMP subversion 0x73 are old enough that
+ * support BT 1.1 only; so it's a dead giveaway when some
+ * third-party BT 4.0 dongle reuses it.
+ */
+ else if (le16_to_cpu(rp->lmp_subver) <= 0x034e &&
+ le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_1_1)
+ is_fake = true;
+
+ else if (le16_to_cpu(rp->lmp_subver) <= 0x0529 &&
+ le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_1_2)
+ is_fake = true;
+
+ else if (le16_to_cpu(rp->lmp_subver) <= 0x0c5c &&
+ le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_2_0)
+ is_fake = true;
+
+ else if (le16_to_cpu(rp->lmp_subver) <= 0x1899 &&
+ le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_2_1)
+ is_fake = true;
+
+ else if (le16_to_cpu(rp->lmp_subver) <= 0x22bb &&
+ le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_4_0)
+ is_fake = true;
+
+ if (is_fake) {
+ bt_dev_warn(hdev, "CSR: Unbranded CSR clone detected; adding workarounds...");
+
+ /* Generally these clones have big discrepancies between
+ * advertised features and what's actually supported.
+ * Probably will need to be expanded in the future;
+ * without these the controller will lock up.
+ */
+ set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
+ set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
+
/* Clear the reset quirk since this is not an actual
* early Bluetooth 1.1 device from CSR.
*/
clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
-
- /* These fake CSR controllers have all a broken
- * stored link key handling and so just disable it.
- */
- set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
+ clear_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
}
kfree_skb(skb);
@@ -2262,45 +2336,25 @@ static bool btusb_setup_intel_new_get_fw_name(struct intel_version *ver,
return true;
}
-static int btusb_setup_intel_new(struct hci_dev *hdev)
+static int btusb_intel_download_firmware(struct hci_dev *hdev,
+ struct intel_version *ver,
+ struct intel_boot_params *params)
{
- struct btusb_data *data = hci_get_drvdata(hdev);
- struct intel_version ver;
- struct intel_boot_params params;
const struct firmware *fw;
u32 boot_param;
char fwname[64];
- ktime_t calltime, delta, rettime;
- unsigned long long duration;
int err;
+ struct btusb_data *data = hci_get_drvdata(hdev);
- BT_DBG("%s", hdev->name);
-
- /* Set the default boot parameter to 0x0 and it is updated to
- * SKU specific boot parameter after reading Intel_Write_Boot_Params
- * command while downloading the firmware.
- */
- boot_param = 0x00000000;
-
- calltime = ktime_get();
-
- /* Read the Intel version information to determine if the device
- * is in bootloader mode or if it already has operational firmware
- * loaded.
- */
- err = btintel_read_version(hdev, &ver);
- if (err) {
- bt_dev_err(hdev, "Intel Read version failed (%d)", err);
- btintel_reset_to_bootloader(hdev);
- return err;
- }
+ if (!ver || !params)
+ return -EINVAL;
/* The hardware platform number has a fixed value of 0x37 and
* for now only accept this single value.
*/
- if (ver.hw_platform != 0x37) {
+ if (ver->hw_platform != 0x37) {
bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
- ver.hw_platform);
+ ver->hw_platform);
return -EINVAL;
}
@@ -2310,7 +2364,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* This check has been put in place to ensure correct forward
* compatibility options when newer hardware variants come along.
*/
- switch (ver.hw_variant) {
+ switch (ver->hw_variant) {
case 0x0b: /* SfP */
case 0x0c: /* WsP */
case 0x11: /* JfP */
@@ -2320,11 +2374,11 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
break;
default:
bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
- ver.hw_variant);
+ ver->hw_variant);
return -EINVAL;
}
- btintel_version_info(hdev, &ver);
+ btintel_version_info(hdev, ver);
/* The firmware variant determines if the device is in bootloader
* mode or is running operational firmware. The value 0x06 identifies
@@ -2339,25 +2393,25 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* It is not possible to use the Secure Boot Parameters in this
* case since that command is only available in bootloader mode.
*/
- if (ver.fw_variant == 0x23) {
+ if (ver->fw_variant == 0x23) {
clear_bit(BTUSB_BOOTLOADER, &data->flags);
btintel_check_bdaddr(hdev);
- goto finish;
+ return 0;
}
/* If the device is not in bootloader mode, then the only possible
* choice is to return an error and abort the device initialization.
*/
- if (ver.fw_variant != 0x06) {
+ if (ver->fw_variant != 0x06) {
bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
- ver.fw_variant);
+ ver->fw_variant);
return -ENODEV;
}
/* Read the secure boot parameters to identify the operating
* details of the bootloader.
*/
- err = btintel_read_boot_params(hdev, &params);
+ err = btintel_read_boot_params(hdev, params);
if (err)
return err;
@@ -2365,16 +2419,16 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* with a command complete event. If the boot parameters indicate
* that this bootloader does not send them, then abort the setup.
*/
- if (params.limited_cce != 0x00) {
+ if (params->limited_cce != 0x00) {
bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
- params.limited_cce);
+ params->limited_cce);
return -EINVAL;
}
/* If the OTP has no valid Bluetooth device address, then there will
* also be no valid address for the operational firmware.
*/
- if (!bacmp(&params.otp_bdaddr, BDADDR_ANY)) {
+ if (!bacmp(&params->otp_bdaddr, BDADDR_ANY)) {
bt_dev_info(hdev, "No device address configured");
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
}
@@ -2400,7 +2454,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
*
*/
- err = btusb_setup_intel_new_get_fw_name(&ver, &params, fwname,
+ err = btusb_setup_intel_new_get_fw_name(ver, params, fwname,
sizeof(fwname), "sfi");
if (!err) {
bt_dev_err(hdev, "Unsupported Intel firmware naming");
@@ -2415,16 +2469,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
bt_dev_info(hdev, "Found device firmware: %s", fwname);
- /* Save the DDC file name for later use to apply once the firmware
- * downloading is done.
- */
- err = btusb_setup_intel_new_get_fw_name(&ver, &params, fwname,
- sizeof(fwname), "ddc");
- if (!err) {
- bt_dev_err(hdev, "Unsupported Intel firmware naming");
- return -EINVAL;
- }
-
if (fw->size < 644) {
bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
fw->size);
@@ -2479,18 +2523,58 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
goto done;
}
+done:
+ release_firmware(fw);
+ return err;
+}
+
+static int btusb_setup_intel_new(struct hci_dev *hdev)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ struct intel_version ver;
+ struct intel_boot_params params;
+ u32 boot_param;
+ char ddcname[64];
+ ktime_t calltime, delta, rettime;
+ unsigned long long duration;
+ int err;
+ struct intel_debug_features features;
+
+ BT_DBG("%s", hdev->name);
+
+ /* Set the default boot parameter to 0x0 and it is updated to
+ * SKU specific boot parameter after reading Intel_Write_Boot_Params
+ * command while downloading the firmware.
+ */
+ boot_param = 0x00000000;
+
+ calltime = ktime_get();
+
+ /* Read the Intel version information to determine if the device
+ * is in bootloader mode or if it already has operational firmware
+ * loaded.
+ */
+ err = btintel_read_version(hdev, &ver);
+ if (err) {
+ bt_dev_err(hdev, "Intel Read version failed (%d)", err);
+ btintel_reset_to_bootloader(hdev);
+ return err;
+ }
+
+ err = btusb_intel_download_firmware(hdev, &ver, &params);
+ if (err)
+ return err;
+
+ /* controller is already having an operational firmware */
+ if (ver.fw_variant == 0x23)
+ goto finish;
+
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
duration = (unsigned long long) ktime_to_ns(delta) >> 10;
bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
-done:
- release_firmware(fw);
-
- if (err < 0)
- return err;
-
calltime = ktime_get();
set_bit(BTUSB_BOOTING, &data->flags);
@@ -2534,13 +2618,28 @@ done:
clear_bit(BTUSB_BOOTLOADER, &data->flags);
- /* Once the device is running in operational mode, it needs to apply
- * the device configuration (DDC) parameters.
- *
- * The device can work without DDC parameters, so even if it fails
- * to load the file, no need to fail the setup.
+ err = btusb_setup_intel_new_get_fw_name(&ver, &params, ddcname,
+ sizeof(ddcname), "ddc");
+
+ if (!err) {
+ bt_dev_err(hdev, "Unsupported Intel firmware naming");
+ } else {
+ /* Once the device is running in operational mode, it needs to
+ * apply the device configuration (DDC) parameters.
+ *
+ * The device can work without DDC parameters, so even if it
+ * fails to load the file, no need to fail the setup.
+ */
+ btintel_load_ddc_config(hdev, ddcname);
+ }
+
+ /* Read the Intel supported features and if new exception formats
+ * supported, need to load the additional DDC config to enable.
*/
- btintel_load_ddc_config(hdev, fwname);
+ btintel_read_debug_features(hdev, &features);
+
+ /* Set DDC mask for available debug features */
+ btintel_set_debug_features(hdev, &features);
/* Read the Intel version information after loading the FW */
err = btintel_read_version(hdev, &ver);
@@ -2925,7 +3024,7 @@ static int btusb_mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
const u8 *fw_ptr;
size_t fw_size;
int err, dlen;
- u8 flag;
+ u8 flag, param;
err = request_firmware(&fw, fwname, &hdev->dev);
if (err < 0) {
@@ -2933,6 +3032,20 @@ static int btusb_mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
return err;
}
+ /* Power on data RAM the firmware relies on. */
+ param = 1;
+ wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 3;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = &param;
+ wmt_params.status = NULL;
+
+ err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to power on data RAM (%d)", err);
+ return err;
+ }
+
fw_ptr = fw->data;
fw_size = fw->size;
@@ -3704,6 +3817,9 @@ static bool btusb_prevent_wake(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
+ if (test_bit(BTUSB_WAKEUP_DISABLE, &data->flags))
+ return true;
+
return !device_may_wakeup(&data->udev->dev);
}
@@ -3941,10 +4057,20 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_QCA_ROME) {
data->setup_on_usb = btusb_setup_qca;
hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+ hdev->cmd_timeout = btusb_qca_cmd_timeout;
set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
btusb_check_needs_reset_resume(intf);
}
+ if (id->driver_info & BTUSB_AMP) {
+ /* AMP controllers do not support SCO packets */
+ data->isoc = NULL;
+ } else {
+ /* Interface orders are hardcoded in the specification */
+ data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
+ data->isoc_ifnum = ifnum_base + 1;
+ }
+
if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) &&
(id->driver_info & BTUSB_REALTEK)) {
hdev->setup = btrtl_setup_realtek;
@@ -3956,19 +4082,10 @@ static int btusb_probe(struct usb_interface *intf,
* (DEVICE_REMOTE_WAKEUP)
*/
set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
-
- err = usb_autopm_get_interface(intf);
- if (err < 0)
- goto out_free_dev;
- }
-
- if (id->driver_info & BTUSB_AMP) {
- /* AMP controllers do not support SCO packets */
- data->isoc = NULL;
- } else {
- /* Interface orders are hardcoded in the specification */
- data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
- data->isoc_ifnum = ifnum_base + 1;
+ if (btusb_find_altsetting(data, 1))
+ set_bit(BTUSB_USE_ALT1_FOR_WBS, &data->flags);
+ else
+ bt_dev_err(hdev, "Device does not support ALT setting 1");
}
if (!reset)
@@ -4001,11 +4118,13 @@ static int btusb_probe(struct usb_interface *intf,
if (bcdDevice < 0x117)
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+ /* This must be set first in case we disable it for fakes */
+ set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+
/* Fake CSR devices with broken commands */
- if (bcdDevice <= 0x100 || bcdDevice == 0x134)
+ if (le16_to_cpu(udev->descriptor.idVendor) == 0x0a12 &&
+ le16_to_cpu(udev->descriptor.idProduct) == 0x0001)
hdev->setup = btusb_setup_csr;
-
- set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
}
if (id->driver_info & BTUSB_SNIFFER) {
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index e60b2e0773db..e41854e0d79a 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -793,7 +793,7 @@ static int h5_serdev_probe(struct serdev_device *serdev)
if (!h5)
return -ENOMEM;
- set_bit(HCI_UART_RESET_ON_INIT, &h5->serdev_hu.flags);
+ set_bit(HCI_UART_RESET_ON_INIT, &h5->serdev_hu.hdev_flags);
h5->hu = &h5->serdev_hu;
h5->serdev_hu.serdev = serdev;
diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
index d9a4c6c691e0..8bfe024d1fcd 100644
--- a/drivers/bluetooth/hci_ll.c
+++ b/drivers/bluetooth/hci_ll.c
@@ -219,7 +219,7 @@ static void ll_device_want_to_wakeup(struct hci_uart *hu)
* perfectly safe to always send one.
*/
BT_DBG("dual wake-up-indication");
- /* fall through */
+ fallthrough;
case HCILL_ASLEEP:
/* acknowledge device wake up */
if (send_hcill_cmd(HCILL_WAKE_UP_ACK, hu) < 0) {
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 81c3c38baba1..20e1dedbc58c 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -46,7 +46,7 @@
#define HCI_MAX_IBS_SIZE 10
#define IBS_WAKE_RETRANS_TIMEOUT_MS 100
-#define IBS_BTSOC_TX_IDLE_TIMEOUT_MS 40
+#define IBS_BTSOC_TX_IDLE_TIMEOUT_MS 200
#define IBS_HOST_TX_IDLE_TIMEOUT_MS 2000
#define CMD_TRANS_TIMEOUT_MS 100
#define MEMDUMP_TIMEOUT_MS 8000
@@ -72,7 +72,8 @@ enum qca_flags {
QCA_DROP_VENDOR_EVENT,
QCA_SUSPENDING,
QCA_MEMDUMP_COLLECTION,
- QCA_HW_ERROR_EVENT
+ QCA_HW_ERROR_EVENT,
+ QCA_SSR_TRIGGERED
};
enum qca_capabilities {
@@ -289,25 +290,21 @@ static void serial_clock_vote(unsigned long vote, struct hci_uart *hu)
case HCI_IBS_TX_VOTE_CLOCK_ON:
qca->tx_vote = true;
qca->tx_votes_on++;
- new_vote = true;
break;
case HCI_IBS_RX_VOTE_CLOCK_ON:
qca->rx_vote = true;
qca->rx_votes_on++;
- new_vote = true;
break;
case HCI_IBS_TX_VOTE_CLOCK_OFF:
qca->tx_vote = false;
qca->tx_votes_off++;
- new_vote = qca->rx_vote | qca->tx_vote;
break;
case HCI_IBS_RX_VOTE_CLOCK_OFF:
qca->rx_vote = false;
qca->rx_votes_off++;
- new_vote = qca->rx_vote | qca->tx_vote;
break;
default:
@@ -315,6 +312,8 @@ static void serial_clock_vote(unsigned long vote, struct hci_uart *hu)
return;
}
+ new_vote = qca->rx_vote | qca->tx_vote;
+
if (new_vote != old_vote) {
if (new_vote)
__serial_clock_on(hu->tty);
@@ -474,8 +473,6 @@ static void hci_ibs_tx_idle_timeout(struct timer_list *t)
case HCI_IBS_TX_ASLEEP:
case HCI_IBS_TX_WAKING:
- /* Fall through */
-
default:
BT_ERR("Spurious timeout tx state %d", qca->tx_ibs_state);
break;
@@ -518,8 +515,6 @@ static void hci_ibs_wake_retrans_timeout(struct timer_list *t)
case HCI_IBS_TX_ASLEEP:
case HCI_IBS_TX_AWAKE:
- /* Fall through */
-
default:
BT_ERR("Spurious timeout tx state %d", qca->tx_ibs_state);
break;
@@ -837,8 +832,6 @@ static void device_woke_up(struct hci_uart *hu)
break;
case HCI_IBS_TX_ASLEEP:
- /* Fall through */
-
default:
BT_ERR("Received HCI_IBS_WAKE_ACK in tx state %d",
qca->tx_ibs_state);
@@ -862,6 +855,13 @@ static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
BT_DBG("hu %p qca enq skb %p tx_ibs_state %d", hu, skb,
qca->tx_ibs_state);
+ if (test_bit(QCA_SSR_TRIGGERED, &qca->flags)) {
+ /* As SSR is in progress, ignore the packets */
+ bt_dev_dbg(hu->hdev, "SSR is in progress");
+ kfree_skb(skb);
+ return 0;
+ }
+
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
@@ -983,8 +983,11 @@ static void qca_controller_memdump(struct work_struct *work)
while ((skb = skb_dequeue(&qca->rx_memdump_q))) {
mutex_lock(&qca->hci_memdump_lock);
- /* Skip processing the received packets if timeout detected. */
- if (qca->memdump_state == QCA_MEMDUMP_TIMEOUT) {
+ /* Skip processing the received packets if timeout detected
+ * or memdump collection completed.
+ */
+ if (qca->memdump_state == QCA_MEMDUMP_TIMEOUT ||
+ qca->memdump_state == QCA_MEMDUMP_COLLECTED) {
mutex_unlock(&qca->hci_memdump_lock);
return;
}
@@ -1128,6 +1131,7 @@ static int qca_controller_memdump_event(struct hci_dev *hdev,
struct hci_uart *hu = hci_get_drvdata(hdev);
struct qca_data *qca = hu->priv;
+ set_bit(QCA_SSR_TRIGGERED, &qca->flags);
skb_queue_tail(&qca->rx_memdump_q, skb);
queue_work(qca->workqueue, &qca->ctrl_memdump_evt);
@@ -1485,9 +1489,8 @@ static void qca_hw_error(struct hci_dev *hdev, u8 code)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
struct qca_data *qca = hu->priv;
- struct qca_memdump_data *qca_memdump = qca->qca_memdump;
- char *memdump_buf = NULL;
+ set_bit(QCA_SSR_TRIGGERED, &qca->flags);
set_bit(QCA_HW_ERROR_EVENT, &qca->flags);
bt_dev_info(hdev, "mem_dump_status: %d", qca->memdump_state);
@@ -1509,19 +1512,23 @@ static void qca_hw_error(struct hci_dev *hdev, u8 code)
qca_wait_for_dump_collection(hdev);
}
+ mutex_lock(&qca->hci_memdump_lock);
if (qca->memdump_state != QCA_MEMDUMP_COLLECTED) {
bt_dev_err(hu->hdev, "clearing allocated memory due to memdump timeout");
- mutex_lock(&qca->hci_memdump_lock);
- if (qca_memdump)
- memdump_buf = qca_memdump->memdump_buf_head;
- vfree(memdump_buf);
- kfree(qca_memdump);
- qca->qca_memdump = NULL;
+ if (qca->qca_memdump) {
+ vfree(qca->qca_memdump->memdump_buf_head);
+ kfree(qca->qca_memdump);
+ qca->qca_memdump = NULL;
+ }
qca->memdump_state = QCA_MEMDUMP_TIMEOUT;
cancel_delayed_work(&qca->ctrl_memdump_timeout);
- skb_queue_purge(&qca->rx_memdump_q);
- mutex_unlock(&qca->hci_memdump_lock);
+ }
+ mutex_unlock(&qca->hci_memdump_lock);
+
+ if (qca->memdump_state == QCA_MEMDUMP_TIMEOUT ||
+ qca->memdump_state == QCA_MEMDUMP_COLLECTED) {
cancel_work_sync(&qca->ctrl_memdump_evt);
+ skb_queue_purge(&qca->rx_memdump_q);
}
clear_bit(QCA_HW_ERROR_EVENT, &qca->flags);
@@ -1532,10 +1539,30 @@ static void qca_cmd_timeout(struct hci_dev *hdev)
struct hci_uart *hu = hci_get_drvdata(hdev);
struct qca_data *qca = hu->priv;
- if (qca->memdump_state == QCA_MEMDUMP_IDLE)
+ set_bit(QCA_SSR_TRIGGERED, &qca->flags);
+ if (qca->memdump_state == QCA_MEMDUMP_IDLE) {
+ set_bit(QCA_MEMDUMP_COLLECTION, &qca->flags);
qca_send_crashbuffer(hu);
- else
- bt_dev_info(hdev, "Dump collection is in process");
+ qca_wait_for_dump_collection(hdev);
+ } else if (qca->memdump_state == QCA_MEMDUMP_COLLECTING) {
+ /* Let us wait here until memory dump collected or
+ * memory dump timer expired.
+ */
+ bt_dev_info(hdev, "waiting for dump to complete");
+ qca_wait_for_dump_collection(hdev);
+ }
+
+ mutex_lock(&qca->hci_memdump_lock);
+ if (qca->memdump_state != QCA_MEMDUMP_COLLECTED) {
+ qca->memdump_state = QCA_MEMDUMP_TIMEOUT;
+ if (!test_bit(QCA_HW_ERROR_EVENT, &qca->flags)) {
+ /* Inject hw error event to reset the device
+ * and driver.
+ */
+ hci_reset_dev(hu->hdev);
+ }
+ }
+ mutex_unlock(&qca->hci_memdump_lock);
}
static int qca_wcn3990_init(struct hci_uart *hu)
@@ -1641,11 +1668,15 @@ static int qca_setup(struct hci_uart *hu)
bt_dev_info(hdev, "setting up %s",
qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME/QCA6390");
+ qca->memdump_state = QCA_MEMDUMP_IDLE;
+
retry:
ret = qca_power_on(hdev);
if (ret)
return ret;
+ clear_bit(QCA_SSR_TRIGGERED, &qca->flags);
+
if (qca_is_wcn399x(soc_type)) {
set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
@@ -1788,9 +1819,6 @@ static void qca_power_shutdown(struct hci_uart *hu)
qca_flush(hu);
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
- hu->hdev->hw_error = NULL;
- hu->hdev->cmd_timeout = NULL;
-
/* Non-serdev device usually is powered by external power
* and don't need additional action in driver for power down
*/
@@ -1812,6 +1840,9 @@ static int qca_power_off(struct hci_dev *hdev)
struct qca_data *qca = hu->priv;
enum qca_btsoc_type soc_type = qca_soc_type(hu);
+ hu->hdev->hw_error = NULL;
+ hu->hdev->cmd_timeout = NULL;
+
/* Stop sending shutdown command if soc crashes. */
if (soc_type != QCA_ROME
&& qca->memdump_state == QCA_MEMDUMP_IDLE) {
@@ -1819,7 +1850,6 @@ static int qca_power_off(struct hci_dev *hdev)
usleep_range(8000, 10000);
}
- qca->memdump_state = QCA_MEMDUMP_IDLE;
qca_power_shutdown(hu);
return 0;
}
@@ -1962,17 +1992,17 @@ static int qca_serdev_probe(struct serdev_device *serdev)
}
qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
- if (!qcadev->susclk) {
+ if (IS_ERR(qcadev->susclk)) {
dev_warn(&serdev->dev, "failed to acquire clk\n");
- } else {
- err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
- if (err)
- return err;
-
- err = clk_prepare_enable(qcadev->susclk);
- if (err)
- return err;
+ return PTR_ERR(qcadev->susclk);
}
+ err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
+ if (err)
+ return err;
+
+ err = clk_prepare_enable(qcadev->susclk);
+ if (err)
+ return err;
err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
if (err) {
@@ -2050,6 +2080,7 @@ static int __maybe_unused qca_suspend(struct device *dev)
struct hci_uart *hu = &qcadev->serdev_hu;
struct qca_data *qca = hu->priv;
unsigned long flags;
+ bool tx_pending = false;
int ret = 0;
u8 cmd;
@@ -2068,7 +2099,7 @@ static int __maybe_unused qca_suspend(struct device *dev)
switch (qca->tx_ibs_state) {
case HCI_IBS_TX_WAKING:
del_timer(&qca->wake_retrans_timer);
- /* Fall through */
+ fallthrough;
case HCI_IBS_TX_AWAKE:
del_timer(&qca->tx_idle_timer);
@@ -2083,8 +2114,7 @@ static int __maybe_unused qca_suspend(struct device *dev)
qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
qca->ibs_sent_slps++;
-
- qca_wq_serial_tx_clock_vote_off(&qca->ws_tx_vote_off);
+ tx_pending = true;
break;
case HCI_IBS_TX_ASLEEP:
@@ -2101,22 +2131,24 @@ static int __maybe_unused qca_suspend(struct device *dev)
if (ret < 0)
goto error;
- serdev_device_wait_until_sent(hu->serdev,
- msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
+ if (tx_pending) {
+ serdev_device_wait_until_sent(hu->serdev,
+ msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
+ serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_OFF, hu);
+ }
/* Wait for HCI_IBS_SLEEP_IND sent by device to indicate its Tx is going
* to sleep, so that the packet does not wake the system later.
*/
-
ret = wait_event_interruptible_timeout(qca->suspend_wait_q,
qca->rx_ibs_state == HCI_IBS_RX_ASLEEP,
msecs_to_jiffies(IBS_BTSOC_TX_IDLE_TIMEOUT_MS));
-
- if (ret > 0)
- return 0;
-
- if (ret == 0)
+ if (ret == 0) {
ret = -ETIMEDOUT;
+ goto error;
+ }
+
+ return 0;
error:
clear_bit(QCA_SUSPENDING, &qca->flags);
diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
index 599855e4c57c..7b233312e723 100644
--- a/drivers/bluetooth/hci_serdev.c
+++ b/drivers/bluetooth/hci_serdev.c
@@ -355,7 +355,8 @@ void hci_uart_unregister_device(struct hci_uart *hu)
struct hci_dev *hdev = hu->hdev;
clear_bit(HCI_UART_PROTO_READY, &hu->flags);
- hci_unregister_dev(hdev);
+ if (test_bit(HCI_UART_REGISTERED, &hu->flags))
+ hci_unregister_dev(hdev);
hci_free_dev(hdev);
cancel_work_sync(&hu->write_work);
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-27 18:32:31 +0000