diff options
Diffstat (limited to 'arch')
79 files changed, 955 insertions, 756 deletions
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index bf497b8b0ec6..bbe7a0da6264 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -963,7 +963,7 @@ put_tv32(struct timeval32 __user *o, struct timespec64 *i) } static inline long -put_tv_to_tv32(struct timeval32 __user *o, struct timeval *i) +put_tv_to_tv32(struct timeval32 __user *o, struct __kernel_old_timeval *i) { return copy_to_user(o, &(struct timeval32){ .tv_sec = i->tv_sec, diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 2625ce66f8e7..673c6e5b2f56 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -435,7 +435,7 @@ /* Direct-mapped development chip ROM */ pb1176_rom@10200000 { - compatible = "direct-mapped"; + compatible = "mtd-rom"; reg = <0x10200000 0x4000>; bank-width = <1>; }; diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts index 5833fb6f15d8..2c817c4a4c68 100644 --- a/arch/arm/boot/dts/imx1-ads.dts +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -65,7 +65,7 @@ pinctrl-0 = <&pinctrl_weim>; status = "okay"; - nor: nor@0,0 { + nor: flash@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <4>; diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts index 77b21aa7a146..27e72b07b517 100644 --- a/arch/arm/boot/dts/imx1-apf9328.dts +++ b/arch/arm/boot/dts/imx1-apf9328.dts @@ -45,7 +45,7 @@ pinctrl-0 = <&pinctrl_weim>; status = "okay"; - nor: nor@0,0 { + nor: flash@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index b30448cde582..a74870d03a67 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -268,9 +268,12 @@ status = "disabled"; }; - esram: esram@300000 { + esram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x20000>; + ranges = <0 0x00300000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; }; }; }; diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts index 46057d9bf555..c2efcc20ae80 100644 --- a/arch/arm/boot/dts/imx23-sansa.dts +++ b/arch/arm/boot/dts/imx23-sansa.dts @@ -175,10 +175,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; - gpios = < - &gpio1 24 0 /* SDA */ - &gpio1 22 0 /* SCL */ - >; + sda-gpios = <&gpio1 24 0>; + scl-gpios = <&gpio1 22 0>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ }; @@ -186,10 +184,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; - gpios = < - &gpio0 31 0 /* SDA */ - &gpio0 30 0 /* SCL */ - >; + sda-gpios = <&gpio0 31 0>; + scl-gpios = <&gpio0 30 0>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ touch: touch@20 { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 42700d7f8bf7..ba1705595b29 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -406,7 +406,7 @@ status = "disabled"; }; - dma_apbx: dma-apbx@80024000 { + dma_apbx: dma-controller@80024000 { compatible = "fsl,imx23-dma-apbx"; reg = <0x80024000 0x2000>; interrupts = <7 5 9 26 diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi index 0703f62d10d1..93a6e4e680b4 100644 --- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi +++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi @@ -27,7 +27,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts index 7d4301b22b90..1ed3fb7b9ce6 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts @@ -16,7 +16,7 @@ bus-width = <18>; display-timings { native-mode = <&qvga_timings>; - qvga_timings: 320x240 { + qvga_timings: timing0 { clock-frequency = <6500000>; hactive = <320>; vactive = <240>; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts index 80a7f96de4c6..64b2ffac463b 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts @@ -16,7 +16,7 @@ bus-width = <18>; display-timings { native-mode = <&dvi_svga_timings>; - dvi_svga_timings: 800x600 { + dvi_svga_timings: timing0 { clock-frequency = <40000000>; hactive = <800>; vactive = <600>; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts index 24027a1fb46d..fb074bfdaa8d 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts @@ -16,7 +16,7 @@ bus-width = <18>; display-timings { native-mode = <&dvi_vga_timings>; - dvi_vga_timings: 640x480 { + dvi_vga_timings: timing0 { clock-frequency = <31250000>; hactive = <640>; vactive = <480>; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index 05cccd12624c..876b101ce3e6 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -78,7 +78,7 @@ bus-width = <18>; display-timings { native-mode = <&wvga_timings>; - wvga_timings: 640x480 { + wvga_timings: timing0 { hactive = <640>; vactive = <480>; hback-porch = <45>; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 6f1e8ce9e76e..3d9bb7fc3be2 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -16,7 +16,7 @@ fsl,pcr = <0xfae80083>; /* non-standard but required */ display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing0 { clock-frequency = <33000033>; hactive = <800>; vactive = <480>; @@ -47,7 +47,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_leds>; - user { + led-user { label = "Heartbeat"; gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi index 74110bbcd9d4..c7e923584878 100644 --- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi +++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi @@ -33,7 +33,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; @@ -90,7 +90,7 @@ &weim { status = "okay"; - nor: nor@0,0 { + nor: flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts index 9c3ec82ec7e5..50fa0bd4c8a1 100644 --- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts @@ -16,7 +16,7 @@ display-timings { native-mode = <&timing0>; - timing0: 320x240 { + timing0: timing0 { clock-frequency = <6500000>; hactive = <320>; vactive = <240>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 188639738dc3..7f36af150a25 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -19,7 +19,7 @@ fsl,pcr = <0xf0c88080>; /* non-standard but required */ display-timings { native-mode = <&timing0>; - timing0: 640x480 { + timing0: timing0 { hactive = <640>; vactive = <480>; hback-porch = <112>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index bf883e45576a..39e0fcb12d23 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -19,7 +19,7 @@ display-timings { native-mode = <&timing0>; - timing0: 240x320 { + timing0: timing0 { clock-frequency = <5500000>; hactive = <240>; vactive = <320>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index 3d10273177e9..a5fdc2fd4ce5 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -322,7 +322,7 @@ &weim { status = "okay"; - nor: nor@0,0 { + nor: flash@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 3652f5556b29..eb0dac710044 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -588,6 +588,9 @@ iram: iram@ffff4c00 { compatible = "mmio-sram"; reg = <0xffff4c00 0xb400>; + ranges = <0 0xffff4c00 0xb400>; + #address-cells = <1>; + #size-cells = <1>; }; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 235c69bd181f..26dc6c9e1e6c 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -982,7 +982,7 @@ status = "disabled"; }; - dma_apbx: dma-apbx@80024000 { + dma_apbx: dma-controller@80024000 { compatible = "fsl,imx28-dma-apbx"; reg = <0x80024000 0x2000>; interrupts = <78 79 66 0 diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index ce4a5a807442..68af441e7894 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -96,8 +96,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - phy-reset-duration = <20>; phy-supply = <&sw2_reg>; status = "okay"; @@ -110,17 +108,10 @@ #address-cells = <1>; #size-cells = <0>; - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - switch@10 { compatible = "qca,qca8334"; - reg = <10>; + reg = <0x10>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; switch_ports: ports { #address-cells = <1>; @@ -141,15 +132,30 @@ port@2 { reg = <2>; label = "eth2"; + phy-mode = "internal"; phy-handle = <&phy_port2>; }; port@3 { reg = <3>; label = "eth1"; + phy-mode = "internal"; phy-handle = <&phy_port3>; }; }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port2: ethernet-phy@1 { + reg = <1>; + }; + + phy_port3: ethernet-phy@2 { + reg = <2>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 8b65ca8b5f30..2b9d0b1bd982 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -204,9 +204,6 @@ }; &ca_funnel_in_ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { reg = <1>; ca_funnel_in_port1: endpoint { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 7ce541fcac76..8e86841ef4e6 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -183,7 +183,11 @@ clock-names = "apb_pclk"; ca_funnel_in_ports: in-ports { - port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; ca_funnel_in_port0: endpoint { remote-endpoint = <&etm0_out_port>; }; @@ -765,7 +769,7 @@ }; lcdif: lcdif@30730000 { - compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif"; reg = <0x30730000 0x10000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, @@ -1213,7 +1217,7 @@ gpmi: gpmi-nand@33002000{ compatible = "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index d282a7b638d8..cc2d596da7d4 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -337,12 +337,20 @@ pinctrl-0 = <&hdmi_ctl>; status = "disabled"; - hdmi_in: port { + ports { #address-cells = <1>; #size-cells = <0>; - hdmi_in_vop: endpoint@0 { + + hdmi_in: port@0 { reg = <0>; - remote-endpoint = <&vop_out_hdmi>; + + hdmi_in_vop: endpoint { + remote-endpoint = <&vop_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; }; }; }; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 4c6704e4c57e..74d5732c412b 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -62,6 +62,30 @@ states = <1100000 0>, <1300000 1>; }; + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + vin-supply = <®_vcc5v0>; + }; + + reg_vcc1v2: vcc1v2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + vin-supply = <®_vcc5v0>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ diff --git a/arch/arm/crypto/sha256_glue.c b/arch/arm/crypto/sha256_glue.c index 215497f011f2..cb3be0c15a04 100644 --- a/arch/arm/crypto/sha256_glue.c +++ b/arch/arm/crypto/sha256_glue.c @@ -25,8 +25,8 @@ #include "sha256_glue.h" -asmlinkage void sha256_block_data_order(u32 *digest, const void *data, - unsigned int num_blks); +asmlinkage void sha256_block_data_order(struct sha256_state *state, + const u8 *data, int num_blks); int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data, unsigned int len) @@ -34,23 +34,20 @@ int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data, /* make sure casting to sha256_block_fn() is safe */ BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0); - return sha256_base_do_update(desc, data, len, - (sha256_block_fn *)sha256_block_data_order); + return sha256_base_do_update(desc, data, len, sha256_block_data_order); } EXPORT_SYMBOL(crypto_sha256_arm_update); static int crypto_sha256_arm_final(struct shash_desc *desc, u8 *out) { - sha256_base_do_finalize(desc, - (sha256_block_fn *)sha256_block_data_order); + sha256_base_do_finalize(desc, sha256_block_data_order); return sha256_base_finish(desc, out); } int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { - sha256_base_do_update(desc, data, len, - (sha256_block_fn *)sha256_block_data_order); + sha256_base_do_update(desc, data, len, sha256_block_data_order); return crypto_sha256_arm_final(desc, out); } EXPORT_SYMBOL(crypto_sha256_arm_finup); diff --git a/arch/arm/crypto/sha512-glue.c b/arch/arm/crypto/sha512-glue.c index 8775aa42bbbe..1a16b98ec108 100644 --- a/arch/arm/crypto/sha512-glue.c +++ b/arch/arm/crypto/sha512-glue.c @@ -25,27 +25,25 @@ MODULE_ALIAS_CRYPTO("sha512"); MODULE_ALIAS_CRYPTO("sha384-arm"); MODULE_ALIAS_CRYPTO("sha512-arm"); -asmlinkage void sha512_block_data_order(u64 *state, u8 const *src, int blocks); +asmlinkage void sha512_block_data_order(struct sha512_state *state, + u8 const *src, int blocks); int sha512_arm_update(struct shash_desc *desc, const u8 *data, unsigned int len) { - return sha512_base_do_update(desc, data, len, - (sha512_block_fn *)sha512_block_data_order); + return sha512_base_do_update(desc, data, len, sha512_block_data_order); } static int sha512_arm_final(struct shash_desc *desc, u8 *out) { - sha512_base_do_finalize(desc, - (sha512_block_fn *)sha512_block_data_order); + sha512_base_do_finalize(desc, sha512_block_data_order); return sha512_base_finish(desc, out); } int sha512_arm_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { - sha512_base_do_update(desc, data, len, - (sha512_block_fn *)sha512_block_data_order); + sha512_base_do_update(desc, data, len, sha512_block_data_order); return sha512_arm_final(desc, out); } diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 6fb19a393fd2..c06ae33dc53e 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -337,6 +337,7 @@ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("G", 0, NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + { } }, }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 7b095378c96c..eec9ec1db682 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -71,6 +71,7 @@ memory@40000000 { reg = <0 0x40000000 0 0x40000000>; + device_type = "memory"; }; reg_1p8v: regulator-1p8v { diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index f586c1ee4a59..ee57fccd489a 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -57,6 +57,7 @@ memory@40000000 { reg = <0 0x40000000 0 0x20000000>; + device_type = "memory"; }; reg_1p8v: regulator-1p8v { diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index dba3488492f1..21e029afb27b 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -77,425 +77,427 @@ enable-gpios = <&pm8994_gpios 15 0>; }; }; +}; - soc { - serial@7570000 { - label = "BT-UART"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart1_default>; - pinctrl-1 = <&blsp1_uart1_sleep>; +&blsp1_uart1 { + label = "BT-UART"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; - bluetooth { - compatible = "qcom,qca6174-bt"; + bluetooth { + compatible = "qcom,qca6174-bt"; - /* bt_disable_n gpio */ - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + /* bt_disable_n gpio */ + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - clocks = <&divclk4>; - }; - }; + clocks = <&divclk4>; + }; +}; - serial@75b0000 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart1_2pins_default>; - pinctrl-1 = <&blsp2_uart1_2pins_sleep>; - }; +&blsp2_uart1 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_2pins_default>; + pinctrl-1 = <&blsp2_uart1_2pins_sleep>; +}; - serial@75b1000 { - label = "LS-UART0"; - status = "disabled"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_4pins_default>; - pinctrl-1 = <&blsp2_uart2_4pins_sleep>; - }; +&blsp2_uart2 { + label = "LS-UART0"; + status = "disabled"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_4pins_default>; + pinctrl-1 = <&blsp2_uart2_4pins_sleep>; +}; - i2c@7577000 { - /* On Low speed expansion */ - label = "LS-I2C0"; - status = "okay"; - }; +&blsp1_i2c2 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; - i2c@75b6000 { - /* On Low speed expansion */ - label = "LS-I2C1"; - status = "okay"; - }; +&blsp2_i2c1 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; - spi@7575000 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; - }; +&blsp1_spi0 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; - i2c@75b5000 { - /* On High speed expansion */ - label = "HS-I2C2"; - status = "okay"; - }; +&blsp2_i2c0 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; +}; - spi@75ba000{ - /* On High speed expansion */ - label = "HS-SPI1"; - status = "okay"; - }; +&blsp2_spi5 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; - sdhci@74a4900 { - /* External SD card */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 0x1>; - vmmc-supply = <&pm8994_l21>; - vqmmc-supply = <&pm8994_l13>; - status = "okay"; - }; +&camss { + vdda-supply = <&pm8994_l2>; +}; - phy@627000 { - status = "okay"; - }; +&sdhc2 { + /* External SD card */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + cd-gpios = <&msmgpio 38 0x1>; + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; + status = "okay"; +}; - ufshc@624000 { - status = "okay"; - }; +&ufsphy { + status = "okay"; - pinctrl@1010000 { - gpio-line-names = - "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ - "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ - "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ - "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ - "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ - "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ - "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ - "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ - "TP93", /* GPIO_9 */ - "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ - "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ - "NC", /* GPIO_12 */ - "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ - "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ - "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ - "TP99", /* GPIO_16 */ - "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ - "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ - "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ - "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ - "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ - "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ - "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ - "GPIO-D", /* GPIO_24, LSEC pin 26 */ - "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ - "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ - "BLSP6_I2C_SDA", /* GPIO_27 */ - "BLSP6_I2C_SCL", /* GPIO_28 */ - "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ - "GPIO30", /* GPIO_30, S HSEC pin 4 */ - "HDMI_CEC", /* GPIO_31 */ - "HDMI_DDC_CLOCK", /* GPIO_32 */ - "HDMI_DDC_DATA", /* GPIO_33 */ - "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ - "PCIE0_RST_N", /* GPIO_35 */ - "PCIE0_CLKREQ_N", /* GPIO_36 */ - "PCIE0_WAKE", /* GPIO_37 */ - "SD_CARD_DET_N", /* GPIO_38 */ - "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ - "W_DISABLE_N", /* GPIO_40 */ - "[BLSP9_UART_TX]", /* GPIO_41 */ - "[BLSP9_UART_RX]", /* GPIO_42 */ - "[BLSP2_UART_CTS_N]", /* GPIO_43 */ - "[BLSP2_UART_RFR_N]", /* GPIO_44 */ - "[BLSP3_UART_TX]", /* GPIO_45 */ - "[BLSP3_UART_RX]", /* GPIO_46 */ - "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ - "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ - "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ - "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ - "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ - "[CODEC_INT1_N]", /* GPIO_53 */ - "[CODEC_INT2_N]", /* GPIO_54 */ - "[BLSP7_I2C_SDA]", /* GPIO_55 */ - "[BLSP7_I2C_SCL]", /* GPIO_56 */ - "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ - "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ - "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ - "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ - "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ - "GPIO-E", /* GPIO_62, LSEC pin 27 */ - "TP87", /* GPIO_63 */ - "[CODEC_RST_N]", /* GPIO_64 */ - "[PCM1_CLK]", /* GPIO_65 */ - "[PCM1_SYNC]", /* GPIO_66 */ - "[PCM1_DIN]", /* GPIO_67 */ - "[PCM1_DOUT]", /* GPIO_68 */ - "AUDIO_REF_CLK", /* GPIO_69 */ - "SLIMBUS_CLK", /* GPIO_70 */ - "SLIMBUS_DATA0", /* GPIO_71 */ - "SLIMBUS_DATA1", /* GPIO_72 */ - "NC", /* GPIO_73 */ - "NC", /* GPIO_74 */ - "NC", /* GPIO_75 */ - "NC", /* GPIO_76 */ - "TP94", /* GPIO_77 */ - "NC", /* GPIO_78 */ - "TP95", /* GPIO_79 */ - "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ - "TP88", /* GPIO_81 */ - "TP89", /* GPIO_82 */ - "TP90", /* GPIO_83 */ - "TP91", /* GPIO_84 */ - "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ - "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ - "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ - "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ - "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ - "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ - "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ - "NC", /* GPIO_92 */ - "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ - "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ - "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ - "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ - "NC", /* GPIO_97 */ - "CAM1_STANDBY_N", /* GPIO_98 */ - "NC", /* GPIO_99 */ - "NC", /* GPIO_100 */ - "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ - "BOOT_CONFIG1", /* GPIO_102 */ - "USB_HUB_RESET", /* GPIO_103 */ - "CAM1_RST_N", /* GPIO_104 */ - "NC", /* GPIO_105 */ - "NC", /* GPIO_106 */ - "NC", /* GPIO_107 */ - "NC", /* GPIO_108 */ - "NC", /* GPIO_109 */ - "NC", /* GPIO_110 */ - "NC", /* GPIO_111 */ - "NC", /* GPIO_112 */ - "PMI8994_BUA", /* GPIO_113 */ - "PCIE2_RST_N", /* GPIO_114 */ - "PCIE2_CLKREQ_N", /* GPIO_115 */ - "PCIE2_WAKE", /* GPIO_116 */ - "SSC_IRQ_0", /* GPIO_117 */ - "SSC_IRQ_1", /* GPIO_118 */ - "SSC_IRQ_2", /* GPIO_119 */ - "NC", /* GPIO_120 */ - "GPIO121", /* GPIO_121, S HSEC pin 2 */ - "NC", /* GPIO_122 */ - "SSC_IRQ_6", /* GPIO_123 */ - "SSC_IRQ_7", /* GPIO_124 */ - "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ - "BOOT_CONFIG5", /* GPIO_126 */ - "NC", /* GPIO_127 */ - "NC", /* GPIO_128 */ - "BOOT_CONFIG7", /* GPIO_129 */ - "PCIE1_RST_N", /* GPIO_130 */ - "PCIE1_CLKREQ_N", /* GPIO_131 */ - "PCIE1_WAKE", /* GPIO_132 */ - "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ - "NC", /* GPIO_134 */ - "NC", /* GPIO_135 */ - "BOOT_CONFIG8", /* GPIO_136 */ - "NC", /* GPIO_137 */ - "NC", /* GPIO_138 */ - "GPS_SSBI2", /* GPIO_139 */ - "GPS_SSBI1", /* GPIO_140 */ - "NC", /* GPIO_141 */ - "NC", /* GPIO_142 */ - "NC", /* GPIO_143 */ - "BOOT_CONFIG6", /* GPIO_144 */ - "NC", /* GPIO_145 */ - "NC", /* GPIO_146 */ - "NC", /* GPIO_147 */ - "NC", /* GPIO_148 */ - "NC"; /* GPIO_149 */ - }; + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; - qcom,spmi@400f000 { - pmic@0 { - gpios@c000 { - gpio-line-names = - "NC", - "KEY_VOLP_N", - "NC", - "BL1_PWM", - "GPIO-F", /* BL0_PWM, LSEC pin 28 */ - "BL1_EN", - "NC", - "WLAN_EN", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "DIVCLK1", - "DIVCLK2", - "DIVCLK3", - "DIVCLK4", - "BT_EN", - "PMIC_SLB", - "PMIC_BUA", - "USB_VBUS_DET"; - }; - - mpps@a000 { - gpio-line-names = - "VDDPX_BIAS", - "WIFI_LED", - "NC", - "BT_LED", - "PM_MPP05", - "PM_MPP06", - "PM_MPP07", - "NC"; - }; - }; + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; - pmic@2 { - gpios@c000 { - gpio-line-names = - "NC", - "SPKR_AMP_EN1", - "SPKR_AMP_EN2", - "TP61", - "NC", - "USB2_VBUS_DET", - "NC", - "NC", - "NC", - "NC"; - }; - }; - }; + vddp-ref-clk-supply = <&pm8994_l25>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; - phy@34000 { - status = "okay"; - }; +&ufshc { + status = "okay"; - phy@7410000 { - status = "okay"; - }; + vcc-supply = <&pm8994_l20>; + vccq-supply = <&pm8994_l25>; + vccq2-supply = <&pm8994_s4>; - phy@7411000 { - status = "okay"; - }; + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; - phy@7412000 { - status = "okay"; - }; +&msmgpio { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ +}; - usb@6af8800 { - status = "okay"; - extcon = <&usb3_id>; +&pm8994_gpios { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; +}; - dwc3@6a00000 { - extcon = <&usb3_id>; - dr_mode = "otg"; - }; - }; +&pm8994_mpps { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; +}; - usb3_id: usb3-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_det_gpio>; - }; +&pmi8994_gpios { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; +}; - usb@76f8800 { - status = "okay"; - extcon = <&usb2_id>; +&pcie_phy { + status = "okay"; - dwc3@7600000 { - extcon = <&usb2_id>; - dr_mode = "otg"; - maximum-speed = "high-speed"; - }; - }; + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; +}; - usb2_id: usb2-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_det_gpio>; - }; +&usb3phy { + status = "okay"; - wlan_en: wlan-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; - gpio = <&pm8994_gpios 8 0>; +}; - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; - }; +&hsusb_phy1 { + status = "okay"; - agnoc@0 { - pcie@600000 { - status = "okay"; - perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&wlan_en>; - }; + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; +}; - pcie@608000 { - status = "okay"; - perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; - }; +&hsusb_phy2 { + status = "okay"; - pcie@610000 { - status = "okay"; - perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; - }; - }; + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; +}; - slim_msm: slim@91c0000 { - ngd@1 { - wcd9335: codec@1{ - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - }; - }; - }; +&usb3 { + status = "okay"; + extcon = <&usb3_id>; - mdss@900000 { - status = "okay"; + dwc3@6a00000 { + extcon = <&usb3_id>; + dr_mode = "otg"; + }; +}; - mdp@901000 { - status = "okay"; - }; +&usb2 { + status = "okay"; + extcon = <&usb2_id>; - hdmi-phy@9a0600 { - status = "okay"; + dwc3@7600000 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; + }; +}; - vddio-supply = <&pm8994_l12>; - vcca-supply = <&pm8994_l28>; - #phy-cells = <0>; - }; +&pcie0 { + status = "okay"; + perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&pm8994_l28>; +}; - hdmi-tx@9a0000 { - status = "okay"; +&pcie1 { + status = "okay"; + perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; + vdda-supply = <&pm8994_l28>; +}; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; +&pcie2 { + status = "okay"; + perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; + vdda-supply = <&pm8994_l28>; +}; - core-vdda-supply = <&pm8994_l12>; - core-vcc-supply = <&pm8994_s4>; - }; - }; - }; +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + vdd-buck-supply = <&pm8994_s4>; + vdd-buck-sido-supply = <&pm8994_s4>; + vdd-tx-supply = <&pm8994_s4>; + vdd-rx-supply = <&pm8994_s4>; + vdd-io-supply = <&pm8994_s4>; +}; + +&mdss { + status = "okay"; +}; + +&mdp { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; + + vddio-supply = <&pm8994_l12>; + vcca-supply = <&pm8994_l28>; + #phy-cells = <0>; +}; + +&hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&pm8994_l12>; + core-vcc-supply = <&pm8994_s4>; +}; +/ { gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -667,6 +669,35 @@ }; }; }; + + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; + + wlan_en: wlan-en-1-8v { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; }; &spmi_bus { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index bf40500adef7..e1097ba6c948 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1097,8 +1097,8 @@ vddmx-supply = <&pm8916_l3>; vddpx-supply = <&pm8916_l7>; - qcom,state = <&wcnss_smp2p_out 0>; - qcom,state-names = "stop"; + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; pinctrl-names = "default"; pinctrl-0 = <&wcnss_pin_a>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index f1d3c51ea8d0..8bfb897b0e81 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -433,6 +433,19 @@ }; }; + etm { + compatible = "qcom,coresight-remote-etm"; + + out-ports { + port { + modem_etm_out_funnel_in2: endpoint { + remote-endpoint = + <&funnel_in2_in_modem_etm>; + }; + }; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -571,7 +584,7 @@ rpm_msg_ram: memory@68000 { compatible = "qcom,rpm-msg-ram"; - reg = <0x68000 0x6000>; + reg = <0x00068000 0x6000>; }; rng: rng@83000 { @@ -583,28 +596,28 @@ tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; - reg = <0x740000 0x20000>; + reg = <0x00740000 0x20000>; }; tsens0: thermal-sensor@4a9000 { compatible = "qcom,msm8996-tsens"; - reg = <0x4a9000 0x1000>, /* TM */ - <0x4a8000 0x1000>; /* SROT */ + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ #qcom,sensors = <13>; #thermal-sensor-cells = <1>; }; tsens1: thermal-sensor@4ad000 { compatible = "qcom,msm8996-tsens"; - reg = <0x4ad000 0x1000>, /* TM */ - <0x4ac000 0x1000>; /* SROT */ + reg = <0x004ad000 0x1000>, /* TM */ + <0x004ac000 0x1000>; /* SROT */ #qcom,sensors = <8>; #thermal-sensor-cells = <1>; }; tcsr: syscon@7a0000 { compatible = "qcom,tcsr-msm8996", "syscon"; - reg = <0x7a0000 0x18000>; + reg = <0x007a0000 0x18000>; }; intc: interrupt-controller@9bc0000 { @@ -620,7 +633,7 @@ apcs_glb: mailbox@9820000 { compatible = "qcom,msm8996-apcs-hmss-global"; - reg = <0x9820000 0x1000>; + reg = <0x09820000 0x1000>; #mbox-cells = <1>; }; @@ -630,7 +643,7 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - reg = <0x300000 0x90000>; + reg = <0x00300000 0x90000>; }; stm@3002000 { @@ -736,6 +749,14 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + in-ports { + port { + funnel_in2_in_modem_etm: endpoint { + remote-endpoint = + <&modem_etm_out_funnel_in2>; + }; + }; + }; out-ports { port { @@ -1103,7 +1124,7 @@ kryocc: clock-controller@6400000 { compatible = "qcom,apcc-msm8996"; - reg = <0x6400000 0x90000>; + reg = <0x06400000 0x90000>; #clock-cells = <1>; }; @@ -1149,7 +1170,7 @@ blsp2_uart1: serial@75b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x75b0000 0x1000>; + reg = <0x075b0000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; @@ -1215,7 +1236,7 @@ sdhc2: sdhci@74a4900 { status = "disabled"; compatible = "qcom,sdhci-msm-v4"; - reg = <0x74a4900 0x314>, <0x74a4000 0x800>; + reg = <0x074a4900 0x314>, <0x074a4000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, @@ -1300,11 +1321,11 @@ spmi_bus: qcom,spmi@400f000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x400f000 0x1000>, - <0x4400000 0x800000>, - <0x4c00000 0x800000>, - <0x5800000 0x200000>, - <0x400a000 0x002100>; + reg = <0x0400f000 0x1000>, + <0x04400000 0x800000>, + <0x04c00000 0x800000>, + <0x05800000 0x200000>, + <0x0400a000 0x002100>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; @@ -1318,20 +1339,10 @@ ufsphy: phy@627000 { compatible = "qcom,msm8996-ufs-phy-qmp-14nm"; - reg = <0x627000 0xda8>; + reg = <0x00627000 0xda8>; reg-names = "phy_mem"; #phy-cells = <0>; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; - - vddp-ref-clk-supply = <&pm8994_l25>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; - clock-names = "ref_clk_src", "ref_clk"; clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>; @@ -1341,20 +1352,12 @@ ufshc: ufshc@624000 { compatible = "qcom,ufshc"; - reg = <0x624000 0x2500>; + reg = <0x00624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; phys = <&ufsphy>; phy-names = "ufsphy"; - vcc-supply = <&pm8994_l20>; - vccq-supply = <&pm8994_l25>; - vccq2-supply = <&pm8994_s4>; - - vcc-max-microamp = <600000>; - vccq-max-microamp = <450000>; - vccq2-max-microamp = <450000>; - power-domains = <&gcc UFS_GDSC>; clock-names = @@ -1408,7 +1411,7 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - reg = <0x8c0000 0x40000>; + reg = <0x008c0000 0x40000>; assigned-clocks = <&mmcc MMPLL9_PLL>, <&mmcc MMPLL1_PLL>, <&mmcc MMPLL3_PLL>, @@ -1423,7 +1426,7 @@ qfprom@74000 { compatible = "qcom,qfprom"; - reg = <0x74000 0x8ff>; + reg = <0x00074000 0x8ff>; #address-cells = <1>; #size-cells = <1>; @@ -1443,9 +1446,9 @@ }; }; - phy@34000 { + pcie_phy: phy@34000 { compatible = "qcom,msm8996-qmp-pcie-phy"; - reg = <0x34000 0x488>; + reg = <0x00034000 0x488>; #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; @@ -1456,9 +1459,6 @@ <&gcc GCC_PCIE_CLKREF_CLK>; clock-names = "aux", "cfg_ahb", "ref"; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - resets = <&gcc GCC_PCIE_PHY_BCR>, <&gcc GCC_PCIE_PHY_COM_BCR>, <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; @@ -1466,9 +1466,9 @@ status = "disabled"; pciephy_0: lane@35000 { - reg = <0x035000 0x130>, - <0x035200 0x200>, - <0x035400 0x1dc>; + reg = <0x00035000 0x130>, + <0x00035200 0x200>, + <0x00035400 0x1dc>; #phy-cells = <0>; clock-output-names = "pcie_0_pipe_clk_src"; @@ -1479,9 +1479,9 @@ }; pciephy_1: lane@36000 { - reg = <0x036000 0x130>, - <0x036200 0x200>, - <0x036400 0x1dc>; + reg = <0x00036000 0x130>, + <0x00036200 0x200>, + <0x00036400 0x1dc>; #phy-cells = <0>; clock-output-names = "pcie_1_pipe_clk_src"; @@ -1492,9 +1492,9 @@ }; pciephy_2: lane@37000 { - reg = <0x037000 0x130>, - <0x037200 0x200>, - <0x037400 0x1dc>; + reg = <0x00037000 0x130>, + <0x00037200 0x200>, + <0x00037400 0x1dc>; #phy-cells = <0>; clock-output-names = "pcie_2_pipe_clk_src"; @@ -1505,9 +1505,9 @@ }; }; - phy@7410000 { + usb3phy: phy@7410000 { compatible = "qcom,msm8996-qmp-usb3-phy"; - reg = <0x7410000 0x1c4>; + reg = <0x07410000 0x1c4>; #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; @@ -1518,18 +1518,15 @@ <&gcc GCC_USB3_CLKREF_CLK>; clock-names = "aux", "cfg_ahb", "ref"; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - resets = <&gcc GCC_USB3_PHY_BCR>, <&gcc GCC_USB3PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; ssusb_phy_0: lane@7410200 { - reg = <0x7410200 0x200>, - <0x7410400 0x130>, - <0x7410600 0x1a8>; + reg = <0x07410200 0x200>, + <0x07410400 0x130>, + <0x07410600 0x1a8>; #phy-cells = <0>; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -1540,16 +1537,13 @@ hsusb_phy1: phy@7411000 { compatible = "qcom,msm8996-qusb2-phy"; - reg = <0x7411000 0x180>; + reg = <0x07411000 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_RX1_USB2_CLKREF_CLK>; clock-names = "cfg_ahb", "ref"; - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; nvmem-cells = <&qusb2p_hstx_trim>; status = "disabled"; @@ -1557,16 +1551,13 @@ hsusb_phy2: phy@7412000 { compatible = "qcom,msm8996-qusb2-phy"; - reg = <0x7412000 0x180>; + reg = <0x07412000 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_RX2_USB2_CLKREF_CLK>; clock-names = "cfg_ahb", "ref"; - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; nvmem-cells = <&qusb2s_hstx_trim>; status = "disabled"; @@ -1574,7 +1565,7 @@ usb2: usb@76f8800 { compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; - reg = <0x76f8800 0x400>; + reg = <0x076f8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1594,7 +1585,7 @@ dwc3@7600000 { compatible = "snps,dwc3"; - reg = <0x7600000 0xcc00>; + reg = <0x07600000 0xcc00>; interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy2>; phy-names = "usb2-phy"; @@ -1605,7 +1596,7 @@ usb3: usb@6af8800 { compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; - reg = <0x6af8800 0x400>; + reg = <0x06af8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1626,7 +1617,7 @@ dwc3@6a00000 { compatible = "snps,dwc3"; - reg = <0x6a00000 0xcc00>; + reg = <0x06a00000 0xcc00>; interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy1>, <&ssusb_phy_0>; phy-names = "usb2-phy", "usb3-phy"; @@ -1637,7 +1628,7 @@ vfe_smmu: iommu@da0000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xda0000 0x10000>; + reg = <0x00da0000 0x10000>; #global-interrupts = <1>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, @@ -1653,20 +1644,20 @@ camss: camss@a00000 { compatible = "qcom,msm8996-camss"; - reg = <0xa34000 0x1000>, - <0xa00030 0x4>, - <0xa35000 0x1000>, - <0xa00038 0x4>, - <0xa36000 0x1000>, - <0xa00040 0x4>, - <0xa30000 0x100>, - <0xa30400 0x100>, - <0xa30800 0x100>, - <0xa30c00 0x100>, - <0xa31000 0x500>, - <0xa00020 0x10>, - <0xa10000 0x1000>, - <0xa14000 0x1000>; + reg = <0x00a34000 0x1000>, + <0x00a00030 0x4>, + <0x00a35000 0x1000>, + <0x00a00038 0x4>, + <0x00a36000 0x1000>, + <0x00a00040 0x4>, + <0x00a30000 0x100>, + <0x00a30400 0x100>, + <0x00a30800 0x100>, + <0x00a30c00 0x100>, + <0x00a31000 0x500>, + <0x00a00020 0x10>, + <0x00a10000 0x1000>, + <0x00a14000 0x1000>; reg-names = "csiphy0", "csiphy0_clk_mux", "csiphy1", @@ -1774,7 +1765,6 @@ "vfe1_stream", "vfe_ahb", "vfe_axi"; - vdda-supply = <&pm8994_l2>; iommus = <&vfe_smmu 0>, <&vfe_smmu 1>, <&vfe_smmu 2>, @@ -1788,7 +1778,7 @@ adreno_smmu: iommu@b40000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xb40000 0x10000>; + reg = <0x00b40000 0x10000>; #global-interrupts = <1>; interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, @@ -1805,7 +1795,7 @@ mdp_smmu: iommu@d00000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xd00000 0x10000>; + reg = <0x00d00000 0x10000>; #global-interrupts = <1>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, @@ -1821,7 +1811,7 @@ lpass_q6_smmu: iommu@1600000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0x1600000 0x20000>; + reg = <0x01600000 0x20000>; #iommu-cells = <1>; power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; @@ -1886,9 +1876,6 @@ pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>; pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>; - - vdda-supply = <&pm8994_l28>; - linux,pci-domain = <0>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, @@ -1941,8 +1928,6 @@ pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>; pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>; - - vdda-supply = <&pm8994_l28>; linux,pci-domain = <1>; clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, @@ -1994,8 +1979,6 @@ pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>; pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >; - vdda-supply = <&pm8994_l28>; - linux,pci-domain = <2>; clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, <&gcc GCC_PCIE_2_AUX_CLK>, @@ -2015,7 +1998,7 @@ { compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; - reg = <0x9184000 0x32000>; + reg = <0x09184000 0x32000>; num-channels = <31>; interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; @@ -2025,7 +2008,7 @@ slim_msm: slim@91c0000 { compatible = "qcom,slim-ngd-v1.5.0"; - reg = <0x91c0000 0x2C000>; + reg = <0x091c0000 0x2C000>; reg-names = "ctrl"; interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; dmas = <&slimbam 3>, <&slimbam 4>, @@ -2060,12 +2043,6 @@ slim-ifc-dev = <&tasha_ifd>; - vdd-buck-supply = <&pm8994_s4>; - vdd-buck-sido-supply = <&pm8994_s4>; - vdd-tx-supply = <&pm8994_s4>; - vdd-rx-supply = <&pm8994_s4>; - vdd-io-supply = <&pm8994_s4>; - #sound-dai-cells = <1>; }; }; @@ -2075,7 +2052,7 @@ compatible = "qcom,adreno-530.2", "qcom,adreno"; #stream-id-cells = <16>; - reg = <0xb00000 0x3f000>; + reg = <0x00b00000 0x3f000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; @@ -2146,9 +2123,9 @@ mdss: mdss@900000 { compatible = "qcom,mdss"; - reg = <0x900000 0x1000>, - <0x9b0000 0x1040>, - <0x9b8000 0x1040>; + reg = <0x00900000 0x1000>, + <0x009b0000 0x1040>, + <0x009b8000 0x1040>; reg-names = "mdss_phys", "vbif_phys", "vbif_nrt_phys"; @@ -2168,7 +2145,7 @@ mdp: mdp@901000 { compatible = "qcom,mdp5"; - reg = <0x901000 0x90000>; + reg = <0x00901000 0x90000>; reg-names = "mdp_phys"; interrupt-parent = <&mdss>; @@ -2244,12 +2221,12 @@ hdmi_phy: hdmi-phy@9a0600 { #phy-cells = <0>; compatible = "qcom,hdmi-phy-8996"; - reg = <0x9a0600 0x1c4>, - <0x9a0a00 0x124>, - <0x9a0c00 0x124>, - <0x9a0e00 0x124>, - <0x9a1000 0x124>, - <0x9a1200 0x0c8>; + reg = <0x009a0600 0x1c4>, + <0x009a0a00 0x124>, + <0x009a0c00 0x124>, + <0x009a0e00 0x124>, + <0x009a1000 0x124>, + <0x009a1200 0x0c8>; reg-names = "hdmi_pll", "hdmi_tx_l0", "hdmi_tx_l1", diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index dcb79003ca0e..9cb7163c5714 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1396,9 +1396,11 @@ cpu = <&CPU4>; - port{ - etm4_out: endpoint { - remote-endpoint = <&apss_funnel_in4>; + out-ports { + port{ + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; }; }; }; @@ -1413,9 +1415,11 @@ cpu = <&CPU5>; - port{ - etm5_out: endpoint { - remote-endpoint = <&apss_funnel_in5>; + out-ports { + port{ + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; }; }; }; @@ -1430,9 +1434,11 @@ cpu = <&CPU6>; - port{ - etm6_out: endpoint { - remote-endpoint = <&apss_funnel_in6>; + out-ports { + port{ + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; }; }; }; @@ -1447,9 +1453,11 @@ cpu = <&CPU7>; - port{ - etm7_out: endpoint { - remote-endpoint = <&apss_funnel_in7>; + out-ports { + port{ + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index ca77fc8aa75b..b4a0234f66d1 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2501,10 +2501,10 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -2545,10 +2545,10 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>, + <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -2940,6 +2940,15 @@ #power-domain-cells = <1>; }; + pdc_intc: interrupt-controller@b220000 { + compatible = "qcom,sdm845-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + pdc_reset: reset-controller@b2e0000 { compatible = "qcom,sdm845-pdc-global"; reg = <0 0x0b2e0000 0 0x20000>; diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 09fc385c2acd..3639e0a7cb3b 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -3,9 +3,8 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * This file contains NUMA specific variables and functions which can - * be split away from DISCONTIGMEM and are used on NUMA machines with - * contiguous memory. + * This file contains NUMA specific variables and functions which are used on + * NUMA machines with contiguous memory. * 2002/08/07 Erich Focht <efocht@ess.nec.de> * Populate cpu entries in sysfs for non-numa systems as well * Intel Corporation - Ashok Raj diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c index 5e1015eb6d0d..ad6837d00e7d 100644 --- a/arch/ia64/mm/numa.c +++ b/arch/ia64/mm/numa.c @@ -3,9 +3,8 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * This file contains NUMA specific variables and functions which can - * be split away from DISCONTIGMEM and are used on NUMA machines with - * contiguous memory. + * This file contains NUMA specific variables and functions which are used on + * NUMA machines with contiguous memory. * * 2002/08/07 Erich Focht <efocht@ess.nec.de> */ diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h index dcebaaf8c862..803f2a6f9960 100644 --- a/arch/mips/include/asm/checksum.h +++ b/arch/mips/include/asm/checksum.h @@ -276,7 +276,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, " .set pop" : "=&r" (sum), "=&r" (tmp) : "r" (saddr), "r" (daddr), - "0" (htonl(len)), "r" (htonl(proto)), "r" (sum)); + "0" (htonl(len)), "r" (htonl(proto)), "r" (sum) + : "memory"); return csum_fold(sum); } diff --git a/arch/mips/include/asm/mmzone.h b/arch/mips/include/asm/mmzone.h index b826b8473e95..7649ab45e80c 100644 --- a/arch/mips/include/asm/mmzone.h +++ b/arch/mips/include/asm/mmzone.h @@ -20,10 +20,4 @@ #define nid_to_addrbase(nid) 0 #endif -#ifdef CONFIG_DISCONTIGMEM - -#define pfn_to_nid(pfn) pa_to_nid((pfn) << PAGE_SHIFT) - -#endif /* CONFIG_DISCONTIGMEM */ - #endif /* _ASM_MMZONE_H_ */ diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 1e76774b36dd..2849a9b65a05 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -60,6 +60,7 @@ static inline void instruction_pointer_set(struct pt_regs *regs, unsigned long val) { regs->cp0_epc = val; + regs->cp0_cause &= ~CAUSEF_BD; } /* Query offset/name of register from its name/offset */ diff --git a/arch/mips/kernel/elf.c b/arch/mips/kernel/elf.c index 7b045d2a0b51..bbc6f07d8124 100644 --- a/arch/mips/kernel/elf.c +++ b/arch/mips/kernel/elf.c @@ -11,6 +11,7 @@ #include <asm/cpu-features.h> #include <asm/cpu-info.h> +#include <asm/fpu.h> #ifdef CONFIG_MIPS_FP_SUPPORT @@ -309,6 +310,11 @@ void mips_set_personality_nan(struct arch_elf_state *state) struct cpuinfo_mips *c = &boot_cpu_data; struct task_struct *t = current; + /* Do this early so t->thread.fpu.fcr31 won't be clobbered in case + * we are preempted before the lose_fpu(0) in start_thread. + */ + lose_fpu(0); + t->thread.fpu.fcr31 = c->fpu_csr31; switch (state->nan_2008) { case 0: diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index a73899933505..800cc5bc7a38 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -416,7 +416,12 @@ void __init paging_init(void) (highend_pfn - max_low_pfn) << (PAGE_SHIFT - 10)); max_zone_pfns[ZONE_HIGHMEM] = max_low_pfn; } + + max_mapnr = highend_pfn ? highend_pfn : max_low_pfn; +#else + max_mapnr = max_low_pfn; #endif + high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT); free_area_init_nodes(max_zone_pfns); } @@ -452,16 +457,6 @@ void __init mem_init(void) */ BUILD_BUG_ON(IS_ENABLED(CONFIG_32BIT) && (_PFN_SHIFT > PAGE_SHIFT)); -#ifdef CONFIG_HIGHMEM -#ifdef CONFIG_DISCONTIGMEM -#error "CONFIG_HIGHMEM and CONFIG_DISCONTIGMEM dont work together yet" -#endif - max_mapnr = highend_pfn ? highend_pfn : max_low_pfn; -#else - max_mapnr = max_low_pfn; -#endif - high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT); - maar_init(); memblock_free_all(); setup_zero_pages(); /* Setup zeroed pages. */ diff --git a/arch/nds32/include/asm/memory.h b/arch/nds32/include/asm/memory.h index 940d32842793..62faafbc28e4 100644 --- a/arch/nds32/include/asm/memory.h +++ b/arch/nds32/include/asm/memory.h @@ -76,18 +76,12 @@ * virt_to_page(k) convert a _valid_ virtual address to struct page * * virt_addr_valid(k) indicates whether a virtual address is valid */ -#ifndef CONFIG_DISCONTIGMEM - #define ARCH_PFN_OFFSET PHYS_PFN_OFFSET #define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr)) #define virt_to_page(kaddr) (pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)) #define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) -#else /* CONFIG_DISCONTIGMEM */ -#error CONFIG_DISCONTIGMEM is not supported yet. -#endif /* !CONFIG_DISCONTIGMEM */ - #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) #endif diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c index 2496cb2c5551..46d48a0b6dec 100644 --- a/arch/parisc/kernel/firmware.c +++ b/arch/parisc/kernel/firmware.c @@ -122,10 +122,10 @@ static unsigned long f_extend(unsigned long address) #ifdef CONFIG_64BIT if(unlikely(parisc_narrow_firmware)) { if((address & 0xff000000) == 0xf0000000) - return 0xf0f0f0f000000000UL | (u32)address; + return (0xfffffff0UL << 32) | (u32)address; if((address & 0xf0000000) == 0xf0000000) - return 0xffffffff00000000UL | (u32)address; + return (0xffffffffUL << 32) | (u32)address; } #endif return address; diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c index b836fc61a24f..f3a5c5e480cf 100644 --- a/arch/parisc/kernel/ftrace.c +++ b/arch/parisc/kernel/ftrace.c @@ -80,7 +80,7 @@ void notrace __hot ftrace_function_trampoline(unsigned long parent, #endif } -#ifdef CONFIG_FUNCTION_GRAPH_TRACER +#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_FUNCTION_GRAPH_TRACER) int ftrace_enable_ftrace_graph_caller(void) { return 0; diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 0699cfeeb8c9..2141ae7441a9 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -375,5 +375,9 @@ extern void *abatron_pteptrs[2]; #include <asm/nohash/mmu.h> #endif +#if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP) +#define __HAVE_ARCH_RESERVED_KERNEL_PAGES +#endif + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_MMU_H_ */ diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h index 91c69ff53a8a..50c2198c2c76 100644 --- a/arch/powerpc/include/asm/mmzone.h +++ b/arch/powerpc/include/asm/mmzone.h @@ -42,9 +42,6 @@ u64 memory_hotplug_max(void); #else #define memory_hotplug_max() memblock_end_of_DRAM() #endif /* CONFIG_NEED_MULTIPLE_NODES */ -#ifdef CONFIG_FA_DUMP -#define __HAVE_ARCH_RESERVED_KERNEL_PAGES -#endif #endif /* __KERNEL__ */ #endif /* _ASM_MMZONE_H_ */ diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 70b99246dec4..402a05f3a484 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -1424,10 +1424,12 @@ static int emulate_instruction(struct pt_regs *regs) return -EINVAL; } +#ifdef CONFIG_GENERIC_BUG int is_valid_bugaddr(unsigned long addr) { return is_kernel_addr(addr); } +#endif #ifdef CONFIG_MATH_EMULATION static int emulate_math(struct pt_regs *regs) diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 7c603839fe28..841e6ed30f13 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -34,8 +34,8 @@ obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o # 64-bit linker creates .sfpr on demand for final link (vmlinux), # so it is only needed for modules, and only for older linkers which # do not support --save-restore-funcs -ifeq ($(call ld-ifversion, -lt, 225000000, y),y) -always-$(CONFIG_PPC64) += crtsavres.o +ifeq ($(call ld-ifversion, -lt, 225000000, y)$(CONFIG_PPC64),yy) +always += crtsavres.o endif obj-$(CONFIG_PPC_BOOK3S_64) += copyuser_power7.o copypage_power7.o \ diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c index 27650cd5857f..490162fb0893 100644 --- a/arch/powerpc/lib/sstep.c +++ b/arch/powerpc/lib/sstep.c @@ -469,6 +469,8 @@ static int do_fp_load(struct instruction_op *op, unsigned long ea, } u; nb = GETSIZE(op->type); + if (nb > sizeof(u)) + return -EINVAL; if (!address_ok(regs, ea, nb)) return -EFAULT; rn = op->reg; @@ -519,6 +521,8 @@ static int do_fp_store(struct instruction_op *op, unsigned long ea, } u; nb = GETSIZE(op->type); + if (nb > sizeof(u)) + return -EINVAL; if (!address_ok(regs, ea, nb)) return -EFAULT; rn = op->reg; @@ -563,6 +567,9 @@ static nokprobe_inline int do_vec_load(int rn, unsigned long ea, u8 b[sizeof(__vector128)]; } u = {}; + if (size > sizeof(u)) + return -EINVAL; + if (!address_ok(regs, ea & ~0xfUL, 16)) return -EFAULT; /* align to multiple of size */ @@ -590,6 +597,9 @@ static nokprobe_inline int do_vec_store(int rn, unsigned long ea, u8 b[sizeof(__vector128)]; } u; + if (size > sizeof(u)) + return -EINVAL; + if (!address_ok(regs, ea & ~0xfUL, 16)) return -EFAULT; /* align to multiple of size */ diff --git a/arch/powerpc/mm/book3s64/pgtable.c b/arch/powerpc/mm/book3s64/pgtable.c index 2bf7e1b4fd82..c4890f4b0b6c 100644 --- a/arch/powerpc/mm/book3s64/pgtable.c +++ b/arch/powerpc/mm/book3s64/pgtable.c @@ -442,6 +442,7 @@ void ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr, set_pte_at(vma->vm_mm, addr, ptep, pte); } +#ifdef CONFIG_TRANSPARENT_HUGEPAGE /* * For hash translation mode, we use the deposited table to store hash slot * information and they are stored at PTRS_PER_PMD offset from related pmd @@ -463,6 +464,7 @@ int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl, return true; } +#endif /* * Does the CPU support tlbie? diff --git a/arch/powerpc/mm/init-common.c b/arch/powerpc/mm/init-common.c index a84da92920f7..e7b9cc90fd9e 100644 --- a/arch/powerpc/mm/init-common.c +++ b/arch/powerpc/mm/init-common.c @@ -104,7 +104,7 @@ void pgtable_cache_add(unsigned int shift) * as to leave enough 0 bits in the address to contain it. */ unsigned long minalign = max(MAX_PGTABLE_INDEX_SIZE + 1, HUGEPD_SHIFT_MASK + 1); - struct kmem_cache *new; + struct kmem_cache *new = NULL; /* It would be nice if this was a BUILD_BUG_ON(), but at the * moment, gcc doesn't seem to recognize is_power_of_2 as a @@ -117,7 +117,8 @@ void pgtable_cache_add(unsigned int shift) align = max_t(unsigned long, align, minalign); name = kasprintf(GFP_KERNEL, "pgtable-2^%d", shift); - new = kmem_cache_create(name, table_size, align, 0, ctor(shift)); + if (name) + new = kmem_cache_create(name, table_size, align, 0, ctor(shift)); if (!new) panic("Could not allocate pgtable cache for order %d", shift); diff --git a/arch/powerpc/perf/hv-gpci.c b/arch/powerpc/perf/hv-gpci.c index ac3f3df57fe3..e85f1962be02 100644 --- a/arch/powerpc/perf/hv-gpci.c +++ b/arch/powerpc/perf/hv-gpci.c @@ -153,6 +153,20 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index, ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO, virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE); + + /* + * ret value as 'H_PARAMETER' with detail_rc as 'GEN_BUF_TOO_SMALL', + * specifies that the current buffer size cannot accommodate + * all the information and a partial buffer returned. + * Since in this function we are only accessing data for a given starting index, + * we don't need to accommodate whole data and can get required count by + * accessing first entry data. + * Hence hcall fails only incase the ret value is other than H_SUCCESS or + * H_PARAMETER with detail_rc value as GEN_BUF_TOO_SMALL(0x1B). + */ + if (ret == H_PARAMETER && be32_to_cpu(arg->params.detail_rc) == 0x1B) + ret = 0; + if (ret) { pr_devel("hcall failed: 0x%lx\n", ret); goto out; @@ -217,6 +231,7 @@ static int h_gpci_event_init(struct perf_event *event) { u64 count; u8 length; + unsigned long ret; /* Not our event */ if (event->attr.type != event->pmu->type) @@ -247,13 +262,23 @@ static int h_gpci_event_init(struct perf_event *event) } /* check if the request works... */ - if (single_gpci_request(event_get_request(event), + ret = single_gpci_request(event_get_request(event), event_get_starting_index(event), event_get_secondary_index(event), event_get_counter_info_version(event), event_get_offset(event), length, - &count)) { + &count); + + /* + * ret value as H_AUTHORITY implies that partition is not permitted to retrieve + * performance information, and required to set + * "Enable Performance Information Collection" option. + */ + if (ret == H_AUTHORITY) + return -EPERM; + + if (ret) { pr_devel("gpci hcall failed\n"); return -EINVAL; } diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index f514d5d28cd4..3f3821eb4c36 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -97,9 +97,6 @@ static void __init linkstation_init_IRQ(void) mpic_init(mpic); } -extern void avr_uart_configure(void); -extern void avr_uart_send(const char); - static void __noreturn linkstation_restart(char *cmd) { local_irq_disable(); diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h index 5ad12023e562..ebc258fa4858 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc10x.h +++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h @@ -156,4 +156,7 @@ int mpc10x_disable_store_gathering(struct pci_controller *hose); /* For MPC107 boards that use the built-in openpic */ void mpc10x_set_openpic(void); +void avr_uart_configure(void); +void avr_uart_send(const char c); + #endif /* __PPC_KERNEL_MPC10X_H */ diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 34ca344039bb..05e1367c23d5 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -413,6 +413,7 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data) /* * floating point control reg. is in the thread structure */ + save_fpu_regs(); if ((unsigned int) data != 0 || test_fp_ctl(data >> (BITS_PER_LONG - 32))) return -EINVAL; @@ -773,6 +774,7 @@ static int __poke_user_compat(struct task_struct *child, /* * floating point control reg. is in the thread structure */ + save_fpu_regs(); if (test_fp_ctl(tmp)) return -EINVAL; child->thread.fpu.fpc = data; @@ -1006,9 +1008,7 @@ static int s390_fpregs_set(struct task_struct *target, int rc = 0; freg_t fprs[__NUM_FPRS]; - if (target == current) - save_fpu_regs(); - + save_fpu_regs(); if (MACHINE_HAS_VX) convert_vx_to_fp(fprs, target->thread.fpu.vxrs); else diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 6e60cc2443b2..2c99de1cc92c 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -214,13 +214,13 @@ void vtime_flush(struct task_struct *tsk) virt_timer_expire(); steal = S390_lowcore.steal_timer; - avg_steal = S390_lowcore.avg_steal_timer / 2; + avg_steal = S390_lowcore.avg_steal_timer; if ((s64) steal > 0) { S390_lowcore.steal_timer = 0; account_steal_time(cputime_to_nsecs(steal)); avg_steal += steal; } - S390_lowcore.avg_steal_timer = avg_steal; + S390_lowcore.avg_steal_timer = avg_steal / 2; } /* diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index b11eb11e2f49..6a1b46e85dac 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -3348,10 +3348,6 @@ int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) vcpu_load(vcpu); - if (test_fp_ctl(fpu->fpc)) { - ret = -EINVAL; - goto out; - } vcpu->run->s.regs.fpc = fpu->fpc; if (MACHINE_HAS_VX) convert_fp_to_vx((__vector128 *) vcpu->run->s.regs.vrs, @@ -3359,7 +3355,6 @@ int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) else memcpy(vcpu->run->s.regs.fprs, &fpu->fprs, sizeof(fpu->fprs)); -out: vcpu_put(vcpu); return ret; } diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index b8ddacf1efe1..8d241f3c3b78 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -223,7 +223,7 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, /* combine single writes by using store-block insn */ void __iowrite64_copy(void __iomem *to, const void *from, size_t count) { - zpci_memcpy_toio(to, from, count); + zpci_memcpy_toio(to, from, count * 8); } void __iomem *ioremap(unsigned long ioaddr, unsigned long size) diff --git a/arch/sparc/kernel/leon_pci_grpci1.c b/arch/sparc/kernel/leon_pci_grpci1.c index e6935d0ac1ec..c32590bdd312 100644 --- a/arch/sparc/kernel/leon_pci_grpci1.c +++ b/arch/sparc/kernel/leon_pci_grpci1.c @@ -696,7 +696,7 @@ err1: return err; } -static const struct of_device_id grpci1_of_match[] __initconst = { +static const struct of_device_id grpci1_of_match[] = { { .name = "GAISLER_PCIFBRG", }, diff --git a/arch/sparc/kernel/leon_pci_grpci2.c b/arch/sparc/kernel/leon_pci_grpci2.c index ca22f93d9045..dd06abc61657 100644 --- a/arch/sparc/kernel/leon_pci_grpci2.c +++ b/arch/sparc/kernel/leon_pci_grpci2.c @@ -887,7 +887,7 @@ err1: return err; } -static const struct of_device_id grpci2_of_match[] __initconst = { +static const struct of_device_id grpci2_of_match[] = { { .name = "GAISLER_GRPCI2", }, diff --git a/arch/um/Kconfig b/arch/um/Kconfig index 468a5d63ef26..107a0bc668e9 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -85,6 +85,19 @@ config LD_SCRIPT_DYN depends on !LD_SCRIPT_STATIC select MODULE_REL_CRCS if MODVERSIONS +config LD_SCRIPT_DYN_RPATH + bool "set rpath in the binary" if EXPERT + default y + depends on LD_SCRIPT_DYN + help + Add /lib (and /lib64 for 64-bit) to the linux binary's rpath + explicitly. + + You may need to turn this off if compiling for nix systems + that have their libraries in random /nix directories and + might otherwise unexpected use libraries from /lib or /lib64 + instead of the desired ones. + config HOSTFS tristate "Host filesystem" help diff --git a/arch/um/Makefile b/arch/um/Makefile index 773120be0f56..94cea8d46b22 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -118,7 +118,8 @@ archprepare: $(Q)$(MAKE) $(build)=$(HOST_DIR)/um include/generated/user_constants.h LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static -LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib $(call cc-option, -no-pie) +LINK-$(CONFIG_LD_SCRIPT_DYN) += $(call cc-option, -no-pie) +LINK-$(CONFIG_LD_SCRIPT_DYN_RPATH) += -Wl,-rpath,/lib CFLAGS_NO_HARDENING := $(call cc-option, -fno-PIC,) $(call cc-option, -fno-pic,) \ $(call cc-option, -fno-stack-protector,) \ diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 327b728f7244..db15a456482f 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -204,7 +204,7 @@ static int uml_net_close(struct net_device *dev) return 0; } -static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev) +static netdev_tx_t uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct uml_net_private *lp = netdev_priv(dev); unsigned long flags; diff --git a/arch/um/include/shared/kern_util.h b/arch/um/include/shared/kern_util.h index ccafb62e8cce..42dc0e47d3ad 100644 --- a/arch/um/include/shared/kern_util.h +++ b/arch/um/include/shared/kern_util.h @@ -49,7 +49,7 @@ extern void do_uml_exitcalls(void); * Are we disallowed to sleep? Used to choose between GFP_KERNEL and * GFP_ATOMIC. */ -extern int __cant_sleep(void); +extern int __uml_cant_sleep(void); extern int get_current_pid(void); extern int copy_from_user_proc(void *to, void *from, int size); extern int cpu(void); diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index d71dd7725bef..f185d19fd9b6 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -258,7 +258,7 @@ void arch_cpu_idle(void) local_irq_enable(); } -int __cant_sleep(void) { +int __uml_cant_sleep(void) { return in_atomic() || irqs_disabled() || in_interrupt(); /* Is in_interrupt() really needed? */ } diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c index 9fa6e4187d4f..57a27555092f 100644 --- a/arch/um/os-Linux/helper.c +++ b/arch/um/os-Linux/helper.c @@ -45,7 +45,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv) unsigned long stack, sp; int pid, fds[2], ret, n; - stack = alloc_stack(0, __cant_sleep()); + stack = alloc_stack(0, __uml_cant_sleep()); if (stack == 0) return -ENOMEM; @@ -69,7 +69,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv) data.pre_data = pre_data; data.argv = argv; data.fd = fds[1]; - data.buf = __cant_sleep() ? uml_kmalloc(PATH_MAX, UM_GFP_ATOMIC) : + data.buf = __uml_cant_sleep() ? uml_kmalloc(PATH_MAX, UM_GFP_ATOMIC) : uml_kmalloc(PATH_MAX, UM_GFP_KERNEL); pid = clone(helper_child, (void *) sp, CLONE_VM, &data); if (pid < 0) { @@ -116,7 +116,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, unsigned long stack, sp; int pid, status, err; - stack = alloc_stack(0, __cant_sleep()); + stack = alloc_stack(0, __uml_cant_sleep()); if (stack == 0) return -ENOMEM; diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c index ecf2f390fad2..b76ac4df5da5 100644 --- a/arch/um/os-Linux/util.c +++ b/arch/um/os-Linux/util.c @@ -166,23 +166,38 @@ __uml_setup("quiet", quiet_cmd_param, "quiet\n" " Turns off information messages during boot.\n\n"); +/* + * The os_info/os_warn functions will be called by helper threads. These + * have a very limited stack size and using the libc formatting functions + * may overflow the stack. + * So pull in the kernel vscnprintf and use that instead with a fixed + * on-stack buffer. + */ +int vscnprintf(char *buf, size_t size, const char *fmt, va_list args); + void os_info(const char *fmt, ...) { + char buf[256]; va_list list; + int len; if (quiet_info) return; va_start(list, fmt); - vfprintf(stderr, fmt, list); + len = vscnprintf(buf, sizeof(buf), fmt, list); + fwrite(buf, len, 1, stderr); va_end(list); } void os_warn(const char *fmt, ...) { + char buf[256]; va_list list; + int len; va_start(list, fmt); - vfprintf(stderr, fmt, list); + len = vscnprintf(buf, sizeof(buf), fmt, list); + fwrite(buf, len, 1, stderr); va_end(list); } diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 8e29c991ba3e..042bdf1ed653 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -372,7 +372,7 @@ config X86_CMOV config X86_MINIMUM_CPU_FAMILY int default "64" if X86_64 - default "6" if X86_32 && (MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MEFFICEON || MATOM || MCRUSOE || MCORE2 || MK7 || MK8) + default "6" if X86_32 && (MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MEFFICEON || MATOM || MCORE2 || MK7 || MK8) default "5" if X86_32 && X86_CMPXCHG64 default "4" diff --git a/arch/x86/Makefile.um b/arch/x86/Makefile.um index 1db7913795f5..b3c1ae084180 100644 --- a/arch/x86/Makefile.um +++ b/arch/x86/Makefile.um @@ -44,7 +44,7 @@ ELF_FORMAT := elf64-x86-64 # Not on all 64-bit distros /lib is a symlink to /lib64. PLD is an example. -LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib64 +LINK-$(CONFIG_LD_SCRIPT_DYN_RPATH) += -Wl,-rpath,/lib64 LINK-y += -m64 endif diff --git a/arch/x86/include/asm/syscall_wrapper.h b/arch/x86/include/asm/syscall_wrapper.h index e2389ce9bf58..2fac787f5bd0 100644 --- a/arch/x86/include/asm/syscall_wrapper.h +++ b/arch/x86/include/asm/syscall_wrapper.h @@ -14,12 +14,29 @@ struct pt_regs; ,,regs->di,,regs->si,,regs->dx \ ,,regs->r10,,regs->r8,,regs->r9) \ + +/* SYSCALL_PT_ARGS is Adapted from s390x */ +#define SYSCALL_PT_ARG6(m, t1, t2, t3, t4, t5, t6) \ + SYSCALL_PT_ARG5(m, t1, t2, t3, t4, t5), m(t6, (regs->bp)) +#define SYSCALL_PT_ARG5(m, t1, t2, t3, t4, t5) \ + SYSCALL_PT_ARG4(m, t1, t2, t3, t4), m(t5, (regs->di)) +#define SYSCALL_PT_ARG4(m, t1, t2, t3, t4) \ + SYSCALL_PT_ARG3(m, t1, t2, t3), m(t4, (regs->si)) +#define SYSCALL_PT_ARG3(m, t1, t2, t3) \ + SYSCALL_PT_ARG2(m, t1, t2), m(t3, (regs->dx)) +#define SYSCALL_PT_ARG2(m, t1, t2) \ + SYSCALL_PT_ARG1(m, t1), m(t2, (regs->cx)) +#define SYSCALL_PT_ARG1(m, t1) m(t1, (regs->bx)) +#define SYSCALL_PT_ARGS(x, ...) SYSCALL_PT_ARG##x(__VA_ARGS__) + +#define __SC_COMPAT_CAST(t, a) \ + (__typeof(__builtin_choose_expr(__TYPE_IS_L(t), 0, 0U))) \ + (unsigned int)a + /* Mapping of registers to parameters for syscalls on i386 */ #define SC_IA32_REGS_TO_ARGS(x, ...) \ - __MAP(x,__SC_ARGS \ - ,,(unsigned int)regs->bx,,(unsigned int)regs->cx \ - ,,(unsigned int)regs->dx,,(unsigned int)regs->si \ - ,,(unsigned int)regs->di,,(unsigned int)regs->bp) + SYSCALL_PT_ARGS(x, __SC_COMPAT_CAST, \ + __MAP(x, __SC_TYPE, __VA_ARGS__)) \ #ifdef CONFIG_IA32_EMULATION /* diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index f673504cf097..421facbeda91 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -374,6 +374,17 @@ void __init_or_module noinline apply_alternatives(struct alt_instr *start, u8 insn_buff[MAX_PATCH_LEN]; DPRINTK("alt table %px, -> %px", start, end); + + /* + * In the case CONFIG_X86_5LEVEL=y, KASAN_SHADOW_START is defined using + * cpu_feature_enabled(X86_FEATURE_LA57) and is therefore patched here. + * During the process, KASAN becomes confused seeing partial LA57 + * conversion and triggers a false-positive out-of-bound report. + * + * Disable KASAN until the patching is complete. + */ + kasan_disable_current(); + /* * The scan order should be from start to end. A later scanned * alternative code can overwrite previously scanned alternative code. @@ -434,6 +445,8 @@ void __init_or_module noinline apply_alternatives(struct alt_instr *start, text_poke_early(instr, insn_buff, insn_buff_sz); } + + kasan_enable_current(); } #ifdef CONFIG_SMP diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index b2cdf1c07e56..4e84203fc067 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -277,15 +277,6 @@ static void init_amd_k6(struct cpuinfo_x86 *c) return; } #endif - /* - * Work around Erratum 1386. The XSAVES instruction malfunctions in - * certain circumstances on Zen1/2 uarch, and not all parts have had - * updated microcode at the time of writing (March 2023). - * - * Affected parts all have no supervisor XSAVE states, meaning that - * the XSAVEC instruction (which works fine) is equivalent. - */ - clear_cpu_cap(c, X86_FEATURE_XSAVES); } static void init_amd_k7(struct cpuinfo_x86 *c) @@ -989,6 +980,17 @@ static void init_amd_zn(struct cpuinfo_x86 *c) if (c->x86 == 0x19 && !cpu_has(c, X86_FEATURE_BTC_NO)) set_cpu_cap(c, X86_FEATURE_BTC_NO); } + + /* + * Work around Erratum 1386. The XSAVES instruction malfunctions in + * certain circumstances on Zen1/2 uarch, and not all parts have had + * updated microcode at the time of writing (March 2023). + * + * Affected parts all have no supervisor XSAVE states, meaning that + * the XSAVEC instruction (which works fine) is equivalent. + */ + if (c->x86 == 0x17) + clear_cpu_cap(c, X86_FEATURE_XSAVES); } static bool cpu_has_zenbleed_microcode(void) diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 44688917d51f..0418606ec3c0 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -187,6 +187,90 @@ static bool bad_spectre_microcode(struct cpuinfo_x86 *c) return false; } +#define MSR_IA32_TME_ACTIVATE 0x982 + +/* Helpers to access TME_ACTIVATE MSR */ +#define TME_ACTIVATE_LOCKED(x) (x & 0x1) +#define TME_ACTIVATE_ENABLED(x) (x & 0x2) + +#define TME_ACTIVATE_POLICY(x) ((x >> 4) & 0xf) /* Bits 7:4 */ +#define TME_ACTIVATE_POLICY_AES_XTS_128 0 + +#define TME_ACTIVATE_KEYID_BITS(x) ((x >> 32) & 0xf) /* Bits 35:32 */ + +#define TME_ACTIVATE_CRYPTO_ALGS(x) ((x >> 48) & 0xffff) /* Bits 63:48 */ +#define TME_ACTIVATE_CRYPTO_AES_XTS_128 1 + +/* Values for mktme_status (SW only construct) */ +#define MKTME_ENABLED 0 +#define MKTME_DISABLED 1 +#define MKTME_UNINITIALIZED 2 +static int mktme_status = MKTME_UNINITIALIZED; + +static void detect_tme_early(struct cpuinfo_x86 *c) +{ + u64 tme_activate, tme_policy, tme_crypto_algs; + int keyid_bits = 0, nr_keyids = 0; + static u64 tme_activate_cpu0 = 0; + + rdmsrl(MSR_IA32_TME_ACTIVATE, tme_activate); + + if (mktme_status != MKTME_UNINITIALIZED) { + if (tme_activate != tme_activate_cpu0) { + /* Broken BIOS? */ + pr_err_once("x86/tme: configuration is inconsistent between CPUs\n"); + pr_err_once("x86/tme: MKTME is not usable\n"); + mktme_status = MKTME_DISABLED; + + /* Proceed. We may need to exclude bits from x86_phys_bits. */ + } + } else { + tme_activate_cpu0 = tme_activate; + } + + if (!TME_ACTIVATE_LOCKED(tme_activate) || !TME_ACTIVATE_ENABLED(tme_activate)) { + pr_info_once("x86/tme: not enabled by BIOS\n"); + mktme_status = MKTME_DISABLED; + return; + } + + if (mktme_status != MKTME_UNINITIALIZED) + goto detect_keyid_bits; + + pr_info("x86/tme: enabled by BIOS\n"); + + tme_policy = TME_ACTIVATE_POLICY(tme_activate); + if (tme_policy != TME_ACTIVATE_POLICY_AES_XTS_128) + pr_warn("x86/tme: Unknown policy is active: %#llx\n", tme_policy); + + tme_crypto_algs = TME_ACTIVATE_CRYPTO_ALGS(tme_activate); + if (!(tme_crypto_algs & TME_ACTIVATE_CRYPTO_AES_XTS_128)) { + pr_err("x86/mktme: No known encryption algorithm is supported: %#llx\n", + tme_crypto_algs); + mktme_status = MKTME_DISABLED; + } +detect_keyid_bits: + keyid_bits = TME_ACTIVATE_KEYID_BITS(tme_activate); + nr_keyids = (1UL << keyid_bits) - 1; + if (nr_keyids) { + pr_info_once("x86/mktme: enabled by BIOS\n"); + pr_info_once("x86/mktme: %d KeyIDs available\n", nr_keyids); + } else { + pr_info_once("x86/mktme: disabled by BIOS\n"); + } + + if (mktme_status == MKTME_UNINITIALIZED) { + /* MKTME is usable */ + mktme_status = MKTME_ENABLED; + } + + /* + * KeyID bits effectively lower the number of physical address + * bits. Update cpuinfo_x86::x86_phys_bits accordingly. + */ + c->x86_phys_bits -= keyid_bits; +} + static void early_init_intel(struct cpuinfo_x86 *c) { u64 misc_enable; @@ -339,6 +423,13 @@ static void early_init_intel(struct cpuinfo_x86 *c) */ if (detect_extended_topology_early(c) < 0) detect_ht_early(c); + + /* + * Adjust the number of physical bits early because it affects the + * valid bits of the MTRR mask registers. + */ + if (cpu_has(c, X86_FEATURE_TME)) + detect_tme_early(c); } #ifdef CONFIG_X86_32 @@ -540,90 +631,6 @@ static void detect_vmx_virtcap(struct cpuinfo_x86 *c) } } -#define MSR_IA32_TME_ACTIVATE 0x982 - -/* Helpers to access TME_ACTIVATE MSR */ -#define TME_ACTIVATE_LOCKED(x) (x & 0x1) -#define TME_ACTIVATE_ENABLED(x) (x & 0x2) - -#define TME_ACTIVATE_POLICY(x) ((x >> 4) & 0xf) /* Bits 7:4 */ -#define TME_ACTIVATE_POLICY_AES_XTS_128 0 - -#define TME_ACTIVATE_KEYID_BITS(x) ((x >> 32) & 0xf) /* Bits 35:32 */ - -#define TME_ACTIVATE_CRYPTO_ALGS(x) ((x >> 48) & 0xffff) /* Bits 63:48 */ -#define TME_ACTIVATE_CRYPTO_AES_XTS_128 1 - -/* Values for mktme_status (SW only construct) */ -#define MKTME_ENABLED 0 -#define MKTME_DISABLED 1 -#define MKTME_UNINITIALIZED 2 -static int mktme_status = MKTME_UNINITIALIZED; - -static void detect_tme(struct cpuinfo_x86 *c) -{ - u64 tme_activate, tme_policy, tme_crypto_algs; - int keyid_bits = 0, nr_keyids = 0; - static u64 tme_activate_cpu0 = 0; - - rdmsrl(MSR_IA32_TME_ACTIVATE, tme_activate); - - if (mktme_status != MKTME_UNINITIALIZED) { - if (tme_activate != tme_activate_cpu0) { - /* Broken BIOS? */ - pr_err_once("x86/tme: configuration is inconsistent between CPUs\n"); - pr_err_once("x86/tme: MKTME is not usable\n"); - mktme_status = MKTME_DISABLED; - - /* Proceed. We may need to exclude bits from x86_phys_bits. */ - } - } else { - tme_activate_cpu0 = tme_activate; - } - - if (!TME_ACTIVATE_LOCKED(tme_activate) || !TME_ACTIVATE_ENABLED(tme_activate)) { - pr_info_once("x86/tme: not enabled by BIOS\n"); - mktme_status = MKTME_DISABLED; - return; - } - - if (mktme_status != MKTME_UNINITIALIZED) - goto detect_keyid_bits; - - pr_info("x86/tme: enabled by BIOS\n"); - - tme_policy = TME_ACTIVATE_POLICY(tme_activate); - if (tme_policy != TME_ACTIVATE_POLICY_AES_XTS_128) - pr_warn("x86/tme: Unknown policy is active: %#llx\n", tme_policy); - - tme_crypto_algs = TME_ACTIVATE_CRYPTO_ALGS(tme_activate); - if (!(tme_crypto_algs & TME_ACTIVATE_CRYPTO_AES_XTS_128)) { - pr_err("x86/mktme: No known encryption algorithm is supported: %#llx\n", - tme_crypto_algs); - mktme_status = MKTME_DISABLED; - } -detect_keyid_bits: - keyid_bits = TME_ACTIVATE_KEYID_BITS(tme_activate); - nr_keyids = (1UL << keyid_bits) - 1; - if (nr_keyids) { - pr_info_once("x86/mktme: enabled by BIOS\n"); - pr_info_once("x86/mktme: %d KeyIDs available\n", nr_keyids); - } else { - pr_info_once("x86/mktme: disabled by BIOS\n"); - } - - if (mktme_status == MKTME_UNINITIALIZED) { - /* MKTME is usable */ - mktme_status = MKTME_ENABLED; - } - - /* - * KeyID bits effectively lower the number of physical address - * bits. Update cpuinfo_x86::x86_phys_bits accordingly. - */ - c->x86_phys_bits -= keyid_bits; -} - static void init_cpuid_fault(struct cpuinfo_x86 *c) { u64 msr; @@ -758,9 +765,6 @@ static void init_intel(struct cpuinfo_x86 *c) if (cpu_has(c, X86_FEATURE_VMX)) detect_vmx_virtcap(c); - if (cpu_has(c, X86_FEATURE_TME)) - detect_tme(c); - init_intel_misc_features(c); if (tsx_ctrl_state == TSX_CTRL_ENABLE) diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c index 9b98a7d8ac60..84c0e5c2518c 100644 --- a/arch/x86/kernel/cpu/mce/core.c +++ b/arch/x86/kernel/cpu/mce/core.c @@ -42,6 +42,7 @@ #include <linux/export.h> #include <linux/jump_label.h> #include <linux/set_memory.h> +#include <linux/kexec.h> #include <asm/intel-family.h> #include <asm/processor.h> @@ -315,6 +316,7 @@ static noinstr void mce_panic(const char *msg, struct mce *final, char *exp) struct llist_node *pending; struct mce_evt_llist *l; int apei_err = 0; + struct page *p; /* * Allow instrumentation around external facilities usage. Not that it @@ -370,6 +372,20 @@ static noinstr void mce_panic(const char *msg, struct mce *final, char *exp) if (!fake_panic) { if (panic_timeout == 0) panic_timeout = mca_cfg.panic_timeout; + + /* + * Kdump skips the poisoned page in order to avoid + * touching the error bits again. Poison the page even + * if the error is fatal and the machine is about to + * panic. + */ + if (kexec_crash_loaded()) { + if (final && (final->status & MCI_STATUS_ADDRV)) { + p = pfn_to_online_page(final->addr >> PAGE_SHIFT); + if (p) + SetPageHWPoison(p); + } + } panic(msg); } else pr_emerg(HW_ERR "Fake kernel panic: %s\n", msg); diff --git a/arch/x86/mm/ident_map.c b/arch/x86/mm/ident_map.c index 968d7005f4a7..f50cc210a981 100644 --- a/arch/x86/mm/ident_map.c +++ b/arch/x86/mm/ident_map.c @@ -26,18 +26,31 @@ static int ident_pud_init(struct x86_mapping_info *info, pud_t *pud_page, for (; addr < end; addr = next) { pud_t *pud = pud_page + pud_index(addr); pmd_t *pmd; + bool use_gbpage; next = (addr & PUD_MASK) + PUD_SIZE; if (next > end) next = end; - if (info->direct_gbpages) { - pud_t pudval; + /* if this is already a gbpage, this portion is already mapped */ + if (pud_large(*pud)) + continue; + + /* Is using a gbpage allowed? */ + use_gbpage = info->direct_gbpages; - if (pud_present(*pud)) - continue; + /* Don't use gbpage if it maps more than the requested region. */ + /* at the begining: */ + use_gbpage &= ((addr & ~PUD_MASK) == 0); + /* ... or at the end: */ + use_gbpage &= ((next & ~PUD_MASK) == 0); + + /* Never overwrite existing mappings */ + use_gbpage &= !pud_present(*pud); + + if (use_gbpage) { + pud_t pudval; - addr &= PUD_MASK; pudval = __pud((addr - info->offset) | info->page_flag); set_pud(pud, pudval); continue; diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c index 1c3a1962cade..0043fd374a62 100644 --- a/arch/x86/tools/relocs.c +++ b/arch/x86/tools/relocs.c @@ -596,6 +596,14 @@ static void print_absolute_relocs(void) if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) { continue; } + /* + * Do not perform relocations in .notes section; any + * values there are meant for pre-boot consumption (e.g. + * startup_xen). + */ + if (sec_applies->shdr.sh_type == SHT_NOTE) { + continue; + } sh_symtab = sec_symtab->symtab; sym_strtab = sec_symtab->link->strtab; for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Rel); j++) { diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index a1cc855c539c..a76ba342a669 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -65,6 +65,8 @@ int xen_smp_intr_init(unsigned int cpu) char *resched_name, *callfunc_name, *debug_name; resched_name = kasprintf(GFP_KERNEL, "resched%d", cpu); + if (!resched_name) + goto fail_mem; per_cpu(xen_resched_irq, cpu).name = resched_name; rc = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR, cpu, @@ -77,6 +79,8 @@ int xen_smp_intr_init(unsigned int cpu) per_cpu(xen_resched_irq, cpu).irq = rc; callfunc_name = kasprintf(GFP_KERNEL, "callfunc%d", cpu); + if (!callfunc_name) + goto fail_mem; per_cpu(xen_callfunc_irq, cpu).name = callfunc_name; rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_VECTOR, cpu, @@ -90,6 +94,9 @@ int xen_smp_intr_init(unsigned int cpu) if (!xen_fifo_events) { debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu); + if (!debug_name) + goto fail_mem; + per_cpu(xen_debug_irq, cpu).name = debug_name; rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu, xen_debug_interrupt, @@ -101,6 +108,9 @@ int xen_smp_intr_init(unsigned int cpu) } callfunc_name = kasprintf(GFP_KERNEL, "callfuncsingle%d", cpu); + if (!callfunc_name) + goto fail_mem; + per_cpu(xen_callfuncsingle_irq, cpu).name = callfunc_name; rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_SINGLE_VECTOR, cpu, @@ -114,6 +124,8 @@ int xen_smp_intr_init(unsigned int cpu) return 0; + fail_mem: + rc = -ENOMEM; fail: xen_smp_intr_free(cpu); return rc; diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h index 09c56cba442e..5a42d663612b 100644 --- a/arch/xtensa/include/asm/page.h +++ b/arch/xtensa/include/asm/page.h @@ -181,10 +181,6 @@ static inline unsigned long ___pa(unsigned long va) #define pfn_valid(pfn) \ ((pfn) >= ARCH_PFN_OFFSET && ((pfn) - ARCH_PFN_OFFSET) < max_mapnr) -#ifdef CONFIG_DISCONTIGMEM -# error CONFIG_DISCONTIGMEM not supported -#endif - #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT) #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) |