diff options
Diffstat (limited to 'arch/arm')
50 files changed, 180 insertions, 1110 deletions
diff --git a/arch/arm/Kbuild b/arch/arm/Kbuild new file mode 100644 index 000000000000..5208f7061524 --- /dev/null +++ b/arch/arm/Kbuild @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_FPE_NWFPE) += nwfpe/ +# Put arch/arm/fastfpe/ to use this. +obj-$(CONFIG_FPE_FASTFPE) += $(patsubst $(srctree)/$(src)/%,%,$(wildcard $(srctree)/$(src)/fastfpe/)) +obj-$(CONFIG_VFP) += vfp/ +obj-$(CONFIG_XEN) += xen/ +obj-$(CONFIG_VDSO) += vdso/ +obj-y += kernel/ mm/ common/ +obj-y += probes/ +obj-y += net/ +obj-y += crypto/ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 218bf25b369a..e00d94b16658 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1150,12 +1150,6 @@ config PCI_NANOENGINE help Enable PCI on the BSE nanoEngine board. -config PCI_HOST_ITE8152 - bool - depends on PCI && MACH_ARMCORE - default y - select DMABOUNCE - config ARM_ERRATA_814220 bool "ARM errata: Cache maintenance by set/way operations can execute out of order" depends on CPU_V7 @@ -1430,37 +1424,6 @@ config THUMB2_KERNEL If unsure, say N. -config THUMB2_AVOID_R_ARM_THM_JUMP11 - bool "Work around buggy Thumb-2 short branch relocations in gas" - depends on THUMB2_KERNEL && MODULES - default y - help - Various binutils versions can resolve Thumb-2 branches to - locally-defined, preemptible global symbols as short-range "b.n" - branch instructions. - - This is a problem, because there's no guarantee the final - destination of the symbol, or any candidate locations for a - trampoline, are within range of the branch. For this reason, the - kernel does not support fixing up the R_ARM_THM_JUMP11 (102) - relocation in modules at all, and it makes little sense to add - support. - - The symptom is that the kernel fails with an "unsupported - relocation" error when loading some modules. - - Until fixed tools are available, passing - -fno-optimize-sibling-calls to gcc should prevent gcc generating - code which hits this problem, at the cost of a bit of extra runtime - stack usage in some cases. - - The problem is described in more detail at: - https://bugs.launchpad.net/binutils-linaro/+bug/725126 - - Only Thumb-2 kernels are affected. - - Unless you are sure your tools don't have this problem, say Y. - config ARM_PATCH_IDIV bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()" depends on CPU_32v7 && !XIP_KERNEL @@ -2099,3 +2062,5 @@ source "drivers/firmware/Kconfig" if CRYPTO source "arch/arm/crypto/Kconfig" endif + +source "arch/arm/Kconfig.assembler" diff --git a/arch/arm/Kconfig.assembler b/arch/arm/Kconfig.assembler new file mode 100644 index 000000000000..5cb31aae1188 --- /dev/null +++ b/arch/arm/Kconfig.assembler @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 + +config AS_VFP_VMRS_FPINST + def_bool $(as-instr,.fpu vfpv2\nvmrs r0$(comma)FPINST) + help + Supported by binutils >= 2.24 and LLVM integrated assembler. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e7f4ca060c0f..4e877354515f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -123,10 +123,6 @@ AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) ifeq ($(CONFIG_THUMB2_KERNEL),y) CFLAGS_ISA :=-mthumb -Wa,-mimplicit-it=always $(AFLAGS_NOWARN) AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb -# Work around buggy relocation from gas if requested: -ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) -KBUILD_CFLAGS_MODULE +=-fno-optimize-sibling-calls -endif else CFLAGS_ISA :=$(call cc-option,-marm,) $(AFLAGS_NOWARN) AFLAGS_ISA :=$(CFLAGS_ISA) @@ -276,18 +272,8 @@ endif export TEXT_OFFSET GZFLAGS MMUEXT -core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ -# Put arch/arm/fastfpe/ to use this. -core-$(CONFIG_FPE_FASTFPE) += $(patsubst $(srctree)/%,%,$(wildcard $(srctree)/arch/arm/fastfpe/)) -core-$(CONFIG_VFP) += arch/arm/vfp/ -core-$(CONFIG_XEN) += arch/arm/xen/ -core-$(CONFIG_VDSO) += arch/arm/vdso/ - +core-y += arch/arm/ # If we have a machine-specific directory, then include it in the build. -core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ -core-y += arch/arm/probes/ -core-y += arch/arm/net/ -core-y += arch/arm/crypto/ core-y += $(machdirs) $(platdirs) # For cleaning diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 00602a6fba04..b1147b7f2c8d 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -84,9 +84,8 @@ endif # -fstack-protector-strong triggers protection checks in this code, # but it is being used too early to link to meaningful stack_chk logic. -nossp-flags-$(CONFIG_CC_HAS_STACKPROTECTOR_NONE) := -fno-stack-protector $(foreach o, $(libfdt_objs) atags_to_fdt.o, \ - $(eval CFLAGS_$(o) := -I $(srctree)/scripts/dtc/libfdt $(nossp-flags-y))) + $(eval CFLAGS_$(o) := -I $(srctree)/scripts/dtc/libfdt -fno-stack-protector)) # These were previously generated C files. When you are building the kernel # with O=, make sure to remove the stale files in the output tree. Otherwise, @@ -103,13 +102,9 @@ clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S hyp-stub.S KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING -ifeq ($(CONFIG_FUNCTION_TRACER),y) -ORIG_CFLAGS := $(KBUILD_CFLAGS) -KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) -endif - ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \ -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN) +ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 45de2ff6a777..b88d0caa4b2d 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -290,7 +290,7 @@ am33xx_pinmux: pinmux@800 { compatible = "pinctrl-single"; reg = <0x800 0x238>; - #pinctrl-cells = <1>; + #pinctrl-cells = <2>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7f>; }; diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index 06fbffa81636..1990239cc6af 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -140,13 +140,13 @@ compatible = "audio-graph-card"; label = "Droid 4 Audio"; - simple-graph-card,widgets = + widgets = "Speaker", "Earpiece", "Speaker", "Loudspeaker", "Headphone", "Headphone Jack", "Microphone", "Internal Mic"; - simple-graph-card,routing = + routing = "Earpiece", "EP", "Loudspeaker", "SPKR", "Headphone Jack", "HSL", diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 219a260bbe5f..8cd574be94cf 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_CPU_V7) += secure_cntvoff.o -obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o CFLAGS_REMOVE_mcpm_entry.o = -pg AFLAGS_mcpm_head.o := -march=armv7-a diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c index 746e1fce777e..9a9aa53547a6 100644 --- a/arch/arm/common/bL_switcher.c +++ b/arch/arm/common/bL_switcher.c @@ -270,12 +270,11 @@ static struct bL_thread bL_threads[NR_CPUS]; static int bL_switcher_thread(void *arg) { struct bL_thread *t = arg; - struct sched_param param = { .sched_priority = 1 }; int cluster; bL_switch_completion_handler completer; void *completer_cookie; - sched_setscheduler_nocheck(current, SCHED_FIFO, ¶m); + sched_set_fifo_low(current); complete(&t->started); do { diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c deleted file mode 100644 index 9ec740cac469..000000000000 --- a/arch/arm/common/it8152.c +++ /dev/null @@ -1,352 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/common/it8152.c - * - * Copyright Compulab Ltd, 2002-2007 - * Mike Rapoport <mike@compulab.co.il> - * - * The DMA bouncing part is taken from arch/arm/mach-ixp4xx/common-pci.c - * (see this file for respective copyrights) - * - * Thanks to Guennadi Liakhovetski <gl@dsa-ac.de> for IRQ enumberation - * and demux code. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/ptrace.h> -#include <linux/interrupt.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/export.h> - -#include <asm/mach/pci.h> -#include <asm/hardware/it8152.h> - -#define MAX_SLOTS 21 - -static void it8152_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq; - - if (irq >= IT8152_LD_IRQ(0)) { - __raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) | - (1 << (irq - IT8152_LD_IRQ(0)))), - IT8152_INTC_LDCNIMR); - } else if (irq >= IT8152_LP_IRQ(0)) { - __raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) | - (1 << (irq - IT8152_LP_IRQ(0)))), - IT8152_INTC_LPCNIMR); - } else if (irq >= IT8152_PD_IRQ(0)) { - __raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) | - (1 << (irq - IT8152_PD_IRQ(0)))), - IT8152_INTC_PDCNIMR); - } -} - -static void it8152_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq; - - if (irq >= IT8152_LD_IRQ(0)) { - __raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) & - ~(1 << (irq - IT8152_LD_IRQ(0)))), - IT8152_INTC_LDCNIMR); - } else if (irq >= IT8152_LP_IRQ(0)) { - __raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) & - ~(1 << (irq - IT8152_LP_IRQ(0)))), - IT8152_INTC_LPCNIMR); - } else if (irq >= IT8152_PD_IRQ(0)) { - __raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) & - ~(1 << (irq - IT8152_PD_IRQ(0)))), - IT8152_INTC_PDCNIMR); - } -} - -static struct irq_chip it8152_irq_chip = { - .name = "it8152", - .irq_ack = it8152_mask_irq, - .irq_mask = it8152_mask_irq, - .irq_unmask = it8152_unmask_irq, -}; - -void it8152_init_irq(void) -{ - int irq; - - __raw_writel((0xffff), IT8152_INTC_PDCNIMR); - __raw_writel((0), IT8152_INTC_PDCNIRR); - __raw_writel((0xffff), IT8152_INTC_LPCNIMR); - __raw_writel((0), IT8152_INTC_LPCNIRR); - __raw_writel((0xffff), IT8152_INTC_LDCNIMR); - __raw_writel((0), IT8152_INTC_LDCNIRR); - - for (irq = IT8152_IRQ(0); irq <= IT8152_LAST_IRQ; irq++) { - irq_set_chip_and_handler(irq, &it8152_irq_chip, - handle_level_irq); - irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); - } -} - -void it8152_irq_demux(struct irq_desc *desc) -{ - int bits_pd, bits_lp, bits_ld; - int i; - - while (1) { - /* Read all */ - bits_pd = __raw_readl(IT8152_INTC_PDCNIRR); - bits_lp = __raw_readl(IT8152_INTC_LPCNIRR); - bits_ld = __raw_readl(IT8152_INTC_LDCNIRR); - - /* Ack */ - __raw_writel((~bits_pd), IT8152_INTC_PDCNIRR); - __raw_writel((~bits_lp), IT8152_INTC_LPCNIRR); - __raw_writel((~bits_ld), IT8152_INTC_LDCNIRR); - - if (!(bits_ld | bits_lp | bits_pd)) { - /* Re-read to guarantee, that there was a moment of - time, when they all three were 0. */ - bits_pd = __raw_readl(IT8152_INTC_PDCNIRR); - bits_lp = __raw_readl(IT8152_INTC_LPCNIRR); - bits_ld = __raw_readl(IT8152_INTC_LDCNIRR); - if (!(bits_ld | bits_lp | bits_pd)) - return; - } - - bits_pd &= ((1 << IT8152_PD_IRQ_COUNT) - 1); - while (bits_pd) { - i = __ffs(bits_pd); - generic_handle_irq(IT8152_PD_IRQ(i)); - bits_pd &= ~(1 << i); - } - - bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1); - while (bits_lp) { - i = __ffs(bits_lp); - generic_handle_irq(IT8152_LP_IRQ(i)); - bits_lp &= ~(1 << i); - } - - bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1); - while (bits_ld) { - i = __ffs(bits_ld); - generic_handle_irq(IT8152_LD_IRQ(i)); - bits_ld &= ~(1 << i); - } - } -} - -/* mapping for on-chip devices */ -int __init it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if ((dev->vendor == PCI_VENDOR_ID_ITE) && - (dev->device == PCI_DEVICE_ID_ITE_8152)) { - if ((dev->class >> 8) == PCI_CLASS_MULTIMEDIA_AUDIO) - return IT8152_AUDIO_INT; - if ((dev->class >> 8) == PCI_CLASS_SERIAL_USB) - return IT8152_USB_INT; - if ((dev->class >> 8) == PCI_CLASS_SYSTEM_DMA) - return IT8152_CDMA_INT; - } - - return 0; -} - -static unsigned long it8152_pci_dev_base_address(struct pci_bus *bus, - unsigned int devfn) -{ - unsigned long addr = 0; - - if (bus->number == 0) { - if (devfn < PCI_DEVFN(MAX_SLOTS, 0)) - addr = (devfn << 8); - } else - addr = (bus->number << 16) | (devfn << 8); - - return addr; -} - -static int it8152_pci_read_config(struct pci_bus *bus, - unsigned int devfn, int where, - int size, u32 *value) -{ - unsigned long addr = it8152_pci_dev_base_address(bus, devfn); - u32 v; - int shift; - - shift = (where & 3); - - __raw_writel((addr + where), IT8152_PCI_CFG_ADDR); - v = (__raw_readl(IT8152_PCI_CFG_DATA) >> (8 * (shift))); - - *value = v; - - return PCIBIOS_SUCCESSFUL; -} - -static int it8152_pci_write_config(struct pci_bus *bus, - unsigned int devfn, int where, - int size, u32 value) -{ - unsigned long addr = it8152_pci_dev_base_address(bus, devfn); - u32 v, vtemp, mask = 0; - int shift; - - if (size == 1) - mask = 0xff; - if (size == 2) - mask = 0xffff; - - shift = (where & 3); - - __raw_writel((addr + where), IT8152_PCI_CFG_ADDR); - vtemp = __raw_readl(IT8152_PCI_CFG_DATA); - - if (mask) - vtemp &= ~(mask << (8 * shift)); - else - vtemp = 0; - - v = (value << (8 * shift)); - __raw_writel((addr + where), IT8152_PCI_CFG_ADDR); - __raw_writel((v | vtemp), IT8152_PCI_CFG_DATA); - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops it8152_ops = { - .read = it8152_pci_read_config, - .write = it8152_pci_write_config, -}; - -static struct resource it8152_io = { - .name = "IT8152 PCI I/O region", - .flags = IORESOURCE_IO, -}; - -static struct resource it8152_mem = { - .name = "IT8152 PCI memory region", - .start = 0x10000000, - .end = 0x13e00000, - .flags = IORESOURCE_MEM, -}; - -/* - * The following functions are needed for DMA bouncing. - * ITE8152 chip can address up to 64MByte, so all the devices - * connected to ITE8152 (PCI and USB) should have limited DMA window - */ -static int it8152_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) -{ - dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", - __func__, dma_addr, size); - return (dma_addr + size - PHYS_OFFSET) >= SZ_64M; -} - -/* - * Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all - * other devices. - */ -static int it8152_pci_platform_notify(struct device *dev) -{ - if (dev_is_pci(dev)) { - if (dev->dma_mask) - *dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET; - dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET; - dmabounce_register_dev(dev, 2048, 4096, it8152_needs_bounce); - } - return 0; -} - -static int it8152_pci_platform_notify_remove(struct device *dev) -{ - if (dev_is_pci(dev)) - dmabounce_unregister_dev(dev); - - return 0; -} - -int dma_set_coherent_mask(struct device *dev, u64 mask) -{ - if (mask >= PHYS_OFFSET + SZ_64M - 1) - return 0; - - return -EIO; -} - -int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) -{ - /* - * FIXME: use pci_ioremap_io to remap the IO space here and - * move over to the generic io.h implementation. - * This requires solving the same problem for PXA PCMCIA - * support. - */ - it8152_io.start = (unsigned long)IT8152_IO_BASE + 0x12000; - it8152_io.end = (unsigned long)IT8152_IO_BASE + 0x12000 + 0x100000; - - sys->mem_offset = 0x10000000; - sys->io_offset = (unsigned long)IT8152_IO_BASE; - - if (request_resource(&ioport_resource, &it8152_io)) { - printk(KERN_ERR "PCI: unable to allocate IO region\n"); - goto err0; - } - if (request_resource(&iomem_resource, &it8152_mem)) { - printk(KERN_ERR "PCI: unable to allocate memory region\n"); - goto err1; - } - - pci_add_resource_offset(&sys->resources, &it8152_io, sys->io_offset); - pci_add_resource_offset(&sys->resources, &it8152_mem, sys->mem_offset); - - if (platform_notify || platform_notify_remove) { - printk(KERN_ERR "PCI: Can't use platform_notify\n"); - goto err2; - } - - platform_notify = it8152_pci_platform_notify; - platform_notify_remove = it8152_pci_platform_notify_remove; - - return 1; - -err2: - release_resource(&it8152_io); -err1: - release_resource(&it8152_mem); -err0: - return -EBUSY; -} - -/* ITE bridge requires setting latency timer to avoid early bus access - termination by PCI bus master devices -*/ -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - - /* no need to update on-chip OHCI controller */ - if ((dev->vendor == PCI_VENDOR_ID_ITE) && - (dev->device == PCI_DEVICE_ID_ITE_8152) && - ((dev->class >> 8) == PCI_CLASS_SERIAL_USB)) - return; - - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - - -EXPORT_SYMBOL(dma_set_coherent_mask); diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index bd7b7f945e01..81665b7abf83 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -236,8 +236,6 @@ CONFIG_MEDIA_TUNER_CUSTOMISE=y # CONFIG_MEDIA_TUNER_MXL5007T is not set # CONFIG_MEDIA_TUNER_MC44S803 is not set # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_MT9M111=y CONFIG_VIDEO_PXA27x=y # CONFIG_V4L_USB_DRIVERS is not set CONFIG_RADIO_TEA5764=y diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 05c5515fa871..ae15a2a33802 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -217,8 +217,6 @@ CONFIG_MEDIA_TUNER_CUSTOMISE=y # CONFIG_MEDIA_TUNER_MXL5007T is not set # CONFIG_MEDIA_TUNER_MC44S803 is not set # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_MT9M111=y CONFIG_VIDEO_PXA27x=y # CONFIG_V4L_USB_DRIVERS is not set # CONFIG_RADIO_ADAPTERS is not set diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 3df90fc38398..f5f1111f2118 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -110,7 +110,6 @@ CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_SOC_CAMERA=y CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_CODA=y CONFIG_FB=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index cb335478ac37..82d3ffb18e70 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -272,7 +272,6 @@ CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_MUX=y -CONFIG_SOC_CAMERA=y CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_CODA=m CONFIG_VIDEO_IMX_PXP=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 1dc7e9d7a294..d7b9eaf4783c 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -447,11 +447,8 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_SOC_CAMERA=m -CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_PXA27x=m CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_SOC_CAMERA_MT9M111=m CONFIG_DRM=m CONFIG_FIRMWARE_EDID=y CONFIG_FB_TILEBLITTING=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 7b7e333157fe..037d3a718a60 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -155,9 +155,7 @@ CONFIG_REGULATOR_PWM=m CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_SOC_CAMERA=y CONFIG_VIDEO_ATMEL_ISI=y -CONFIG_SOC_CAMERA_OV2640=m CONFIG_DRM=y CONFIG_DRM_ATMEL_HLCDC=y CONFIG_DRM_PANEL_SIMPLE=y diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h index c675bc0d5aa8..be666f58bf7a 100644 --- a/arch/arm/include/asm/device.h +++ b/arch/arm/include/asm/device.h @@ -9,9 +9,6 @@ struct dev_archdata { #ifdef CONFIG_DMABOUNCE struct dmabounce_device_info *dmabounce; #endif -#ifdef CONFIG_IOMMU_API - void *iommu; /* private IOMMU data */ -#endif #ifdef CONFIG_ARM_DMA_USE_IOMMU struct dma_iommu_mapping *mapping; #endif diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h deleted file mode 100644 index e175c2384f28..000000000000 --- a/arch/arm/include/asm/hardware/it8152.h +++ /dev/null @@ -1,116 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * linux/include/arm/hardware/it8152.h - * - * Copyright Compulab Ltd., 2006,2007 - * Mike Rapoport <mike@compulab.co.il> - * - * ITE 8152 companion chip register definitions - */ - -#ifndef __ASM_HARDWARE_IT8152_H -#define __ASM_HARDWARE_IT8152_H - -#include <mach/irqs.h> - -extern void __iomem *it8152_base_address; - -#define IT8152_IO_BASE (it8152_base_address + 0x03e00000) -#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000) - -#define __REG_IT8152(x) (it8152_base_address + (x)) - -#define IT8152_PCI_CFG_ADDR __REG_IT8152(0x3f00800) -#define IT8152_PCI_CFG_DATA __REG_IT8152(0x3f00804) - -#define IT8152_INTC_LDCNIRR __REG_IT8152(0x3f00300) -#define IT8152_INTC_LDPNIRR __REG_IT8152(0x3f00304) -#define IT8152_INTC_LDCNIMR __REG_IT8152(0x3f00308) -#define IT8152_INTC_LDPNIMR __REG_IT8152(0x3f0030C) -#define IT8152_INTC_LDNITR __REG_IT8152(0x3f00310) -#define IT8152_INTC_LDNIAR __REG_IT8152(0x3f00314) -#define IT8152_INTC_LPCNIRR __REG_IT8152(0x3f00320) -#define IT8152_INTC_LPPNIRR __REG_IT8152(0x3f00324) -#define IT8152_INTC_LPCNIMR __REG_IT8152(0x3f00328) -#define IT8152_INTC_LPPNIMR __REG_IT8152(0x3f0032C) -#define IT8152_INTC_LPNITR __REG_IT8152(0x3f00330) -#define IT8152_INTC_LPNIAR __REG_IT8152(0x3f00334) -#define IT8152_INTC_PDCNIRR __REG_IT8152(0x3f00340) -#define IT8152_INTC_PDPNIRR __REG_IT8152(0x3f00344) -#define IT8152_INTC_PDCNIMR __REG_IT8152(0x3f00348) -#define IT8152_INTC_PDPNIMR __REG_IT8152(0x3f0034C) -#define IT8152_INTC_PDNITR __REG_IT8152(0x3f00350) -#define IT8152_INTC_PDNIAR __REG_IT8152(0x3f00354) -#define IT8152_INTC_INTC_TYPER __REG_IT8152(0x3f003FC) - -#define IT8152_GPIO_GPDR __REG_IT8152(0x3f00500) - -/* - Interrupt controller per register summary: - --------------------------------------- - LCDNIRR: - IT8152_LD_IRQ(8) PCICLK stop - IT8152_LD_IRQ(7) MCLK ready - IT8152_LD_IRQ(6) s/w - IT8152_LD_IRQ(5) UART - IT8152_LD_IRQ(4) GPIO - IT8152_LD_IRQ(3) TIMER 4 - IT8152_LD_IRQ(2) TIMER 3 - IT8152_LD_IRQ(1) TIMER 2 - IT8152_LD_IRQ(0) TIMER 1 - - LPCNIRR: - IT8152_LP_IRQ(x) serial IRQ x - - PCIDNIRR: - IT8152_PD_IRQ(14) PCISERR - IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR) - IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR) - IT8152_PD_IRQ(11) PCI INTD - IT8152_PD_IRQ(10) PCI INTC - IT8152_PD_IRQ(9) PCI INTB - IT8152_PD_IRQ(8) PCI INTA - IT8152_PD_IRQ(7) serial INTD - IT8152_PD_IRQ(6) serial INTC - IT8152_PD_IRQ(5) serial INTB - IT8152_PD_IRQ(4) serial INTA - IT8152_PD_IRQ(3) serial IRQ IOCHK (IOCHKR) - IT8152_PD_IRQ(2) chaining DMA (CDMAR) - IT8152_PD_IRQ(1) USB (USBR) - IT8152_PD_IRQ(0) Audio controller (ACR) - */ -#define IT8152_IRQ(x) (IRQ_BOARD_START + (x)) -#define IT8152_LAST_IRQ (IRQ_BOARD_START + 40) - -/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ -#define IT8152_LD_IRQ_COUNT 9 -#define IT8152_LP_IRQ_COUNT 16 -#define IT8152_PD_IRQ_COUNT 15 - -/* Priorities: */ -#define IT8152_PD_IRQ(i) IT8152_IRQ(i) -#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT) -#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT) - -/* frequently used interrupts */ -#define IT8152_PCISERR IT8152_PD_IRQ(14) -#define IT8152_H2PTADR IT8152_PD_IRQ(13) -#define IT8152_H2PMAR IT8152_PD_IRQ(12) -#define IT8152_PCI_INTD IT8152_PD_IRQ(11) -#define IT8152_PCI_INTC IT8152_PD_IRQ(10) -#define IT8152_PCI_INTB IT8152_PD_IRQ(9) -#define IT8152_PCI_INTA IT8152_PD_IRQ(8) -#define IT8152_CDMA_INT IT8152_PD_IRQ(2) -#define IT8152_USB_INT IT8152_PD_IRQ(1) -#define IT8152_AUDIO_INT IT8152_PD_IRQ(0) - -struct pci_dev; -struct pci_sys_data; - -extern void it8152_irq_demux(struct irq_desc *desc); -extern void it8152_init_irq(void); -extern int it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -extern int it8152_pci_setup(int nr, struct pci_sys_data *sys); -extern struct pci_ops it8152_ops; - -#endif /* __ASM_HARDWARE_IT8152_H */ diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 069da393110c..15f4674715f8 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -22,17 +22,6 @@ #ifdef CONFIG_ARM_LPAE -static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) -{ - return (pmd_t *)get_zeroed_page(GFP_KERNEL); -} - -static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) -{ - BUG_ON((unsigned long)pmd & (PAGE_SIZE-1)); - free_page((unsigned long)pmd); -} - static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) { set_pud(pud, __pud(__pa(pmd) | PMD_TYPE_TABLE)); @@ -76,6 +65,7 @@ static inline void clean_pte_table(pte_t *pte) #define __HAVE_ARCH_PTE_ALLOC_ONE_KERNEL #define __HAVE_ARCH_PTE_ALLOC_ONE +#define __HAVE_ARCH_PGD_FREE #include <asm-generic/pgalloc.h> static inline pte_t * diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 4d4e7b6aabff..9415222b49ad 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -27,7 +27,6 @@ #else /* !CONFIG_MMU */ #include <linux/swap.h> -#include <asm/pgalloc.h> #include <asm/tlbflush.h> static inline void __tlb_remove_table(void *_table) diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 98c6b91be4a8..a13d90206472 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -76,9 +76,13 @@ static inline void set_fs(mm_segment_t fs) modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER); } -#define segment_eq(a, b) ((a) == (b)) +#define uaccess_kernel() (get_fs() == KERNEL_DS) -/* We use 33-bit arithmetic here... */ +/* + * We use 33-bit arithmetic here. Success returns zero, failure returns + * addr_limit. We take advantage that addr_limit will be zero for KERNEL_DS, + * so this will always return success in that case. + */ #define __range_ok(addr, size) ({ \ unsigned long flag, roksum; \ __chk_user_ptr(addr); \ @@ -263,7 +267,7 @@ extern int __put_user_8(void *, unsigned long long); */ #define USER_DS KERNEL_DS -#define segment_eq(a, b) (1) +#define uaccess_kernel() (true) #define __addr_ok(addr) ((void)(addr), 1) #define __range_ok(addr, size) ((void)(addr), 0) #define get_fs() (KERNEL_DS) diff --git a/arch/arm/include/asm/vfp.h b/arch/arm/include/asm/vfp.h index 7157d2a30a49..19928bfb4f9c 100644 --- a/arch/arm/include/asm/vfp.h +++ b/arch/arm/include/asm/vfp.h @@ -9,6 +9,7 @@ #ifndef __ASM_VFP_H #define __ASM_VFP_H +#ifndef CONFIG_AS_VFP_VMRS_FPINST #define FPSID cr0 #define FPSCR cr1 #define MVFR1 cr6 @@ -16,6 +17,7 @@ #define FPEXC cr8 #define FPINST cr9 #define FPINST2 cr10 +#endif /* FPSID bits */ #define FPSID_IMPLEMENTER_BIT (24) diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index 628c336e8e3b..ba0d4cb5377e 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -8,7 +8,16 @@ #include <asm/vfp.h> -@ Macros to allow building with old toolkits (with no VFP support) +#ifdef CONFIG_AS_VFP_VMRS_FPINST + .macro VFPFMRX, rd, sysreg, cond + vmrs\cond \rd, \sysreg + .endm + + .macro VFPFMXR, sysreg, rd, cond + vmsr\cond \sysreg, \rd + .endm +#else + @ Macros to allow building with old toolkits (with no VFP support) .macro VFPFMRX, rd, sysreg, cond MRC\cond p10, 7, \rd, \sysreg, cr0, 0 @ FMRX \rd, \sysreg .endm @@ -16,26 +25,29 @@ .macro VFPFMXR, sysreg, rd, cond MCR\cond p10, 7, \rd, \sysreg, cr0, 0 @ FMXR \sysreg, \rd .endm +#endif @ read all the working registers back into the VFP .macro VFPFLDMIA, base, tmp + .fpu vfpv2 #if __LINUX_ARM_ARCH__ < 6 - LDC p11, cr0, [\base],#33*4 @ FLDMIAX \base!, {d0-d15} + fldmiax \base!, {d0-d15} #else - LDC p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d0-d15} + vldmia \base!, {d0-d15} #endif #ifdef CONFIG_VFPv3 + .fpu vfpv3 #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] tst \tmp, #HWCAP_VFPD32 - ldclne p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + vldmiane \base!, {d16-d31} addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field cmp \tmp, #2 @ 32 x 64bit registers? - ldcleq p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + vldmiaeq \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #endif #endif @@ -44,22 +56,23 @@ @ write all the working registers out of the VFP .macro VFPFSTMIA, base, tmp #if __LINUX_ARM_ARCH__ < 6 - STC p11, cr0, [\base],#33*4 @ FSTMIAX \base!, {d0-d15} + fstmiax \base!, {d0-d15} #else - STC p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d0-d15} + vstmia \base!, {d0-d15} #endif #ifdef CONFIG_VFPv3 + .fpu vfpv3 #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] tst \tmp, #HWCAP_VFPD32 - stclne p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + vstmiane \base!, {d16-d31} addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field cmp \tmp, #2 @ 32 x 64bit registers? - stcleq p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + vstmiaeq \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #endif #endif diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c index ce02f92f4ab2..6c12d9fe694e 100644 --- a/arch/arm/kernel/atags_parse.c +++ b/arch/arm/kernel/atags_parse.c @@ -91,8 +91,6 @@ __tagtable(ATAG_VIDEOTEXT, parse_tag_videotext); static int __init parse_tag_ramdisk(const struct tag *tag) { rd_image_start = tag->u.ramdisk.start; - rd_doload = (tag->u.ramdisk.flags & 1) == 0; - rd_prompt = (tag->u.ramdisk.flags & 2) == 0; if (tag->u.ramdisk.size) rd_size = tag->u.ramdisk.size; diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index ed46ca69813d..eecec16aa708 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -252,23 +252,6 @@ static void pci_fixup_cy82c693(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693); -static void pci_fixup_it8152(struct pci_dev *dev) -{ - int i; - /* fixup for ITE 8152 devices */ - /* FIXME: add defines for class 0x68000 and 0x80103 */ - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST || - dev->class == 0x68000 || - dev->class == 0x80103) { - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - dev->resource[i].flags = 0; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152); - /* * If the bus contains any of these devices, then we must not turn on * parity checking of any kind. Currently this is CyberPro 20x0 only. diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 974b6c64d3e6..5d84ad333f05 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -11,7 +11,6 @@ #include <linux/irq.h> #include <linux/memblock.h> #include <linux/of_fdt.h> -#include <asm/pgalloc.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> #include <asm/fncpy.h> diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 3395be186c7d..8e6ace03e960 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -281,21 +281,6 @@ int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs) return 1; } -/* - * fill in the fpe structure for a core dump... - */ -int dump_fpu (struct pt_regs *regs, struct user_fp *fp) -{ - struct thread_info *thread = current_thread_info(); - int used_math = thread->used_cp[1] | thread->used_cp[2]; - - if (used_math) - memcpy(fp, &thread->fpstate.soft, sizeof (*fp)); - - return used_math != 0; -} -EXPORT_SYMBOL(dump_fpu); - unsigned long get_wchan(struct task_struct *p) { struct stackframe frame; diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index d0f7c8896c96..2771e682220b 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -569,14 +569,9 @@ out: static int gpr_get(struct task_struct *target, const struct user_regset *regset, - unsigned int pos, unsigned int count, - void *kbuf, void __user *ubuf) + struct membuf to) { - struct pt_regs *regs = task_pt_regs(target); - - return user_regset_copyout(&pos, &count, &kbuf, &ubuf, - regs, - 0, sizeof(*regs)); + return membuf_write(&to, task_pt_regs(target), sizeof(struct pt_regs)); } static int gpr_set(struct task_struct *target, @@ -602,12 +597,10 @@ static int gpr_set(struct task_struct *target, static int fpa_get(struct task_struct *target, const struct user_regset *regset, - unsigned int pos, unsigned int count, - void *kbuf, void __user *ubuf) + struct membuf to) { - return user_regset_copyout(&pos, &count, &kbuf, &ubuf, - &task_thread_info(target)->fpstate, - 0, sizeof(struct user_fp)); + return membuf_write(&to, &task_thread_info(target)->fpstate, + sizeof(struct user_fp)); } static int fpa_set(struct task_struct *target, @@ -642,41 +635,20 @@ static int fpa_set(struct task_struct *target, * vfp_set() ignores this chunk * * 1 word for the FPSCR - * - * The bounds-checking logic built into user_regset_copyout and friends - * means that we can make a simple sequence of calls to map the relevant data - * to/from the specified slice of the user regset structure. */ static int vfp_get(struct task_struct *target, const struct user_regset *regset, - unsigned int pos, unsigned int count, - void *kbuf, void __user *ubuf) + struct membuf to) { - int ret; struct thread_info *thread = task_thread_info(target); struct vfp_hard_struct const *vfp = &thread->vfpstate.hard; - const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs); const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr); vfp_sync_hwstate(thread); - ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, - &vfp->fpregs, - user_fpregs_offset, - user_fpregs_offset + sizeof(vfp->fpregs)); - if (ret) - return ret; - - ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, - user_fpregs_offset + sizeof(vfp->fpregs), - user_fpscr_offset); - if (ret) - return ret; - - return user_regset_copyout(&pos, &count, &kbuf, &ubuf, - &vfp->fpscr, - user_fpscr_offset, - user_fpscr_offset + sizeof(vfp->fpscr)); + membuf_write(&to, vfp->fpregs, sizeof(vfp->fpregs)); + membuf_zero(&to, user_fpscr_offset - sizeof(vfp->fpregs)); + return membuf_store(&to, vfp->fpscr); } /* @@ -739,7 +711,7 @@ static const struct user_regset arm_regsets[] = { .n = ELF_NGREG, .size = sizeof(u32), .align = sizeof(u32), - .get = gpr_get, + .regset_get = gpr_get, .set = gpr_set }, [REGSET_FPR] = { @@ -751,7 +723,7 @@ static const struct user_regset arm_regsets[] = { .n = sizeof(struct user_fp) / sizeof(u32), .size = sizeof(u32), .align = sizeof(u32), - .get = fpa_get, + .regset_get = fpa_get, .set = fpa_set }, #ifdef CONFIG_VFP @@ -764,7 +736,7 @@ static const struct user_regset arm_regsets[] = { .n = ARM_VFPREGS_SIZE / sizeof(u32), .size = sizeof(u32), .align = sizeof(u32), - .get = vfp_get, + .regset_get = vfp_get, .set = vfp_set }, #endif /* CONFIG_VFP */ diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index ab2568996ddb..c9dc912b83f0 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -713,7 +713,9 @@ struct page *get_signal_page(void) /* Defer to generic check */ asmlinkage void addr_limit_check_failed(void) { +#ifdef CONFIG_MMU addr_limit_user_check(); +#endif } #ifdef CONFIG_DEBUG_RSEQ diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 9a6432557871..5d9da61eff62 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -37,7 +37,6 @@ #include <asm/idmap.h> #include <asm/topology.h> #include <asm/mmu_context.h> -#include <asm/pgalloc.h> #include <asm/procinfo.h> #include <asm/processor.h> #include <asm/sections.h> diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index cc726afea023..76ea4178a55c 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -22,6 +22,19 @@ * A simple function epilogue looks like this: * ldm sp, {fp, sp, pc} * + * When compiled with clang, pc and sp are not pushed. A simple function + * prologue looks like this when built with clang: + * + * stmdb {..., fp, lr} + * add fp, sp, #x + * sub sp, sp, #y + * + * A simple function epilogue looks like this when built with clang: + * + * sub sp, fp, #x + * ldm {..., fp, pc} + * + * * Note that with framepointer enabled, even the leaf functions have the same * prologue and epilogue, therefore we can ignore the LR value in this case. */ @@ -34,6 +47,16 @@ int notrace unwind_frame(struct stackframe *frame) low = frame->sp; high = ALIGN(low, THREAD_SIZE); +#ifdef CONFIG_CC_IS_CLANG + /* check current frame pointer is within bounds */ + if (fp < low + 4 || fp > high - 4) + return -EINVAL; + + frame->sp = frame->fp; + frame->fp = *(unsigned long *)(fp); + frame->pc = frame->lr; + frame->lr = *(unsigned long *)(fp + 4); +#else /* check current frame pointer is within bounds */ if (fp < low + 12 || fp > high - 4) return -EINVAL; @@ -42,6 +65,7 @@ int notrace unwind_frame(struct stackframe *frame) frame->fp = *(unsigned long *)(fp - 12); frame->sp = *(unsigned long *)(fp - 8); frame->pc = *(unsigned long *)(fp - 4); +#endif return 0; } diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c index d2c9338d74e8..24bd20564be7 100644 --- a/arch/arm/kernel/suspend.c +++ b/arch/arm/kernel/suspend.c @@ -7,7 +7,6 @@ #include <asm/bugs.h> #include <asm/cacheflush.h> #include <asm/idmap.h> -#include <asm/pgalloc.h> #include <asm/memory.h> #include <asm/smp_plat.h> #include <asm/suspend.h> diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index c0350bc20941..3da4c0920198 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -19,7 +19,6 @@ #include <linux/dma-mapping.h> #include <linux/leds.h> #include <linux/platform_data/asoc-mx27vis.h> -#include <media/soc_camera.h> #include <sound/tlv320aic32x4.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -191,34 +190,6 @@ static const struct gpio visstrim_m10_gpios[] __initconst = { }; /* Camera */ -static int visstrim_camera_power(struct device *dev, int on) -{ - gpio_set_value(TVP5150_PWDN, on); - - return 0; -}; - -static int visstrim_camera_reset(struct device *dev) -{ - gpio_set_value(TVP5150_RSTN, 0); - ndelay(500); - gpio_set_value(TVP5150_RSTN, 1); - - return 0; -}; - -static struct i2c_board_info visstrim_i2c_camera = { - I2C_BOARD_INFO("tvp5150", 0x5d), -}; - -static struct soc_camera_link iclink_tvp5150 = { - .bus_id = 0, - .board_info = &visstrim_i2c_camera, - .i2c_adapter_id = 0, - .power = visstrim_camera_power, - .reset = visstrim_camera_reset, -}; - static struct mx2_camera_platform_data visstrim_camera = { .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE | MX2_CAMERA_PCLK_SAMPLE_RISING, @@ -549,8 +520,6 @@ static void __init visstrim_m10_late_init(void) imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata, sizeof(snd_mx27vis_pdata)); - platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, - &iclink_tvp5150, sizeof(iclink_tvp5150)); gpio_led_register_device(0, &visstrim_m10_led_data); diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 8d32894ecd2e..2ee527c00284 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -29,8 +29,6 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> -#include <media/soc_camera.h> - #include <asm/serial.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -40,7 +38,6 @@ #include <mach/mux.h> #include <mach/hardware.h> -#include "camera.h" #include <mach/usb.h> #include "ams-delta-fiq.h" @@ -459,12 +456,6 @@ static struct gpiod_lookup_table leds_gpio_table = { }, }; -static struct i2c_board_info ams_delta_camera_board_info[] = { - { - I2C_BOARD_INFO("ov6650", 0x60), - }, -}; - #ifdef CONFIG_LEDS_TRIGGERS DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger); @@ -483,27 +474,6 @@ static int ams_delta_camera_power(struct device *dev, int power) #define ams_delta_camera_power NULL #endif -static struct soc_camera_link ams_delta_iclink = { - .bus_id = 0, /* OMAP1 SoC camera bus */ - .i2c_adapter_id = 1, - .board_info = &ams_delta_camera_board_info[0], - .module_name = "ov6650", - .power = ams_delta_camera_power, -}; - -static struct platform_device ams_delta_camera_device = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &ams_delta_iclink, - }, -}; - -static struct omap1_cam_platform_data ams_delta_camera_platform_data = { - .camexclk_khz = 12000, /* default 12MHz clock, no extra DPLL */ - .lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */ -}; - static struct platform_device ams_delta_audio_device = { .name = "ams-delta-audio", .id = -1, @@ -598,7 +568,6 @@ static struct platform_device *ams_delta_devices[] __initdata = { &latch1_gpio_device, &latch2_gpio_device, &ams_delta_kp_device, - &ams_delta_camera_device, &ams_delta_audio_device, &ams_delta_serio_device, &ams_delta_nand_device, @@ -750,7 +719,6 @@ static void __init ams_delta_init(void) omap_register_i2c_bus(1, 100, NULL, 0); omap1_usb_init(&ams_delta_usb_config); - omap1_set_camera_info(&ams_delta_camera_platform_data); #ifdef CONFIG_LEDS_TRIGGERS led_trigger_register_simple("ams_delta_camera", &ams_delta_camera_led_trigger); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 4df15e693b6e..144b9caa935c 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -26,6 +26,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -55,6 +56,9 @@ #include "common.h" +/* Name of the GPIO chip used by the OMAP for GPIOs 0..15 */ +#define OMAP_GPIO_LABEL "gpio-0-15" + /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ #define OMAP_OSK_ETHR_START 0x04800300 @@ -240,7 +244,9 @@ static struct tps65010_board tps_board = { static struct i2c_board_info __initdata osk_i2c_board_info[] = { { + /* This device will get the name "i2c-tps65010" */ I2C_BOARD_INFO("tps65010", 0x48), + .dev_name = "tps65010", .platform_data = &tps_board, }, @@ -278,6 +284,16 @@ static void __init osk_init_cf(void) irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); } +static struct gpiod_lookup_table osk_usb_gpio_table = { + .dev_id = "ohci", + .table = { + /* Power GPIO on the I2C-attached TPS65010 */ + GPIO_LOOKUP("i2c-tps65010", 1, "power", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP(OMAP_GPIO_LABEL, 9, "overcurrent", + GPIO_ACTIVE_HIGH), + }, +}; + static struct omap_usb_config osk_usb_config __initdata = { /* has usb host connector (A) ... for development it can also * be used, with a NONSTANDARD gender-bending cable/dongle, as @@ -581,6 +597,7 @@ static void __init osk_init(void) l |= (3 << 1); omap_writel(l, USB_TRANSCEIVER_CTRL); + gpiod_add_lookup_table(&osk_usb_gpio_table); omap1_usb_init(&osk_usb_config); /* irq for tps65010 chip */ diff --git a/arch/arm/mach-omap1/camera.h b/arch/arm/mach-omap1/camera.h deleted file mode 100644 index 8018f410d024..000000000000 --- a/arch/arm/mach-omap1/camera.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_CAMERA_H_ -#define __ASM_ARCH_CAMERA_H_ - -#include <linux/platform_data/media/omap1_camera.h> - -void omap1_camera_init(void *); - -static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info) -{ - omap1_camera_init(info); -} - -#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 3c4900ac72fc..eb0f09edb3d1 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -21,7 +21,6 @@ #include <mach/mux.h> #include <mach/omap7xx.h> -#include "camera.h" #include <mach/hardware.h> #include "common.h" @@ -258,48 +257,6 @@ static inline void omap_init_spi100k(void) } #endif - -#define OMAP1_CAMERA_BASE 0xfffb6800 -#define OMAP1_CAMERA_IOSIZE 0x1c - -static struct resource omap1_camera_resources[] = { - [0] = { - .start = OMAP1_CAMERA_BASE, - .end = OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = INT_CAMERA, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device omap1_camera_device = { - .name = "omap1-camera", - .id = 0, /* This is used to put cameras on this interface */ - .dev = { - .dma_mask = &omap1_camera_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(omap1_camera_resources), - .resource = omap1_camera_resources, -}; - -void __init omap1_camera_init(void *info) -{ - struct platform_device *dev = &omap1_camera_device; - int ret; - - dev->dev.platform_data = info; - - ret = platform_device_register(dev); - if (ret) - dev_err(&dev->dev, "unable to register device: %d\n", ret); -} - - /*-------------------------------------------------------------------------*/ static inline void omap_init_sti(void) {} diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h index 7f4e053c3434..b5533e93cb63 100644 --- a/arch/arm/mach-omap2/mmc.h +++ b/arch/arm/mach-omap2/mmc.h @@ -16,7 +16,3 @@ static inline int omap_msdi_reset(struct omap_hwmod *oh) return 0; } #endif - -/* called from board-specific card detection service routine */ -extern void omap_mmc_notify_cover_event(struct device *dev, int slot, - int is_closed); diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 67fa28532a3a..9fba98c2313a 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -42,7 +42,6 @@ #include <asm/cacheflush.h> #include <asm/tlbflush.h> #include <asm/smp_scu.h> -#include <asm/pgalloc.h> #include <asm/suspend.h> #include <asm/virt.h> #include <asm/hardware/cache-l2x0.h> diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 4df443943579..b4a5fe02a0af 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -47,8 +47,6 @@ #include "pm.h" #include <linux/platform_data/media/camera-pxa.h> -#include <media/soc_camera.h> - #include "generic.h" #include "devices.h" @@ -272,115 +270,6 @@ static int __init palmz72_pm_init(void) device_initcall(palmz72_pm_init); #endif -/****************************************************************************** - * SoC Camera - ******************************************************************************/ -#if defined(CONFIG_SOC_CAMERA_OV9640) || \ - defined(CONFIG_SOC_CAMERA_OV9640_MODULE) -static struct pxacamera_platform_data palmz72_pxacamera_platform_data = { - .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | - PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, - .mclk_10khz = 2600, -}; - -/* Board I2C devices. */ -static struct i2c_board_info palmz72_i2c_device[] = { - { - I2C_BOARD_INFO("ov9640", 0x30), - } -}; - -static int palmz72_camera_power(struct device *dev, int power) -{ - gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power); - mdelay(50); - return 0; -} - -static int palmz72_camera_reset(struct device *dev) -{ - gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1); - mdelay(50); - gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0); - mdelay(50); - return 0; -} - -static struct soc_camera_link palmz72_iclink = { - .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */ - .board_info = &palmz72_i2c_device[0], - .i2c_adapter_id = 0, - .module_name = "ov96xx", - .power = &palmz72_camera_power, - .reset = &palmz72_camera_reset, - .flags = SOCAM_DATAWIDTH_8, -}; - -static struct gpiod_lookup_table palmz72_i2c_gpiod_table = { - .dev_id = "i2c-gpio.0", - .table = { - GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP_IDX("gpio-pxa", 117, NULL, 1, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - }, -}; - -static struct i2c_gpio_platform_data palmz72_i2c_bus_data = { - .udelay = 10, - .timeout = 100, -}; - -static struct platform_device palmz72_i2c_bus_device = { - .name = "i2c-gpio", - .id = 0, /* we use this as a replacement for i2c-pxa */ - .dev = { - .platform_data = &palmz72_i2c_bus_data, - } -}; - -static struct platform_device palmz72_camera = { - .name = "soc-camera-pdrv", - .id = -1, - .dev = { - .platform_data = &palmz72_iclink, - }, -}; - -/* Here we request the camera GPIOs and configure them. We power up the camera - * module, deassert the reset pin, but put it into powerdown (low to no power - * consumption) mode. This allows us to later bring the module up fast. */ -static struct gpio palmz72_camera_gpios[] = { - { GPIO_NR_PALMZ72_CAM_POWER, GPIOF_INIT_HIGH,"Camera DVDD" }, - { GPIO_NR_PALMZ72_CAM_RESET, GPIOF_INIT_LOW, "Camera RESET" }, - { GPIO_NR_PALMZ72_CAM_PWDN, GPIOF_INIT_LOW, "Camera PWDN" }, -}; - -static inline void __init palmz72_cam_gpio_init(void) -{ - int ret; - - ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios)); - if (!ret) - gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios)); - else - printk(KERN_ERR "Camera GPIO init failed!\n"); - - return; -} - -static void __init palmz72_camera_init(void) -{ - palmz72_cam_gpio_init(); - pxa_set_camera_info(&palmz72_pxacamera_platform_data); - gpiod_add_lookup_table(&palmz72_i2c_gpiod_table); - platform_device_register(&palmz72_i2c_bus_device); - platform_device_register(&palmz72_camera); -} -#else -static inline void palmz72_camera_init(void) {} -#endif - static struct gpiod_lookup_table palmz72_mci_gpio_table = { .dev_id = "pxa2xx-mci.0", .table = { @@ -416,7 +305,6 @@ static void __init palmz72_init(void) palm27x_pmic_init(); palmz72_kpc_init(); palmz72_leds_init(); - palmz72_camera_init(); } MACHINE_START(PALMZ72, "Palm Zire72") diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index bf613f88d70b..8dfcc366d0fe 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -24,10 +24,6 @@ #include <linux/pwm.h> #include <linux/pwm_backlight.h> -#include <media/i2c/mt9v022.h> -#include <media/soc_camera.h> - -#include <linux/platform_data/media/camera-pxa.h> #include <asm/mach/map.h> #include "pxa27x.h" #include <mach/audio.h> @@ -375,149 +371,6 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = { }; /* - * PXA27x Camera specific stuff - */ -#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) -static unsigned long pcm990_camera_pin_config[] = { - /* CIF */ - GPIO98_CIF_DD_0, - GPIO105_CIF_DD_1, - GPIO104_CIF_DD_2, - GPIO103_CIF_DD_3, - GPIO95_CIF_DD_4, - GPIO94_CIF_DD_5, - GPIO93_CIF_DD_6, - GPIO108_CIF_DD_7, - GPIO107_CIF_DD_8, - GPIO106_CIF_DD_9, - GPIO42_CIF_MCLK, - GPIO45_CIF_PCLK, - GPIO43_CIF_FV, - GPIO44_CIF_LV, -}; - -/* - * CICR4: PCLK_EN: Pixel clock is supplied by the sensor - * MCLK_EN: Master clock is generated by PXA - * PCP: Data sampled on the falling edge of pixel clock - */ -struct pxacamera_platform_data pcm990_pxacamera_platform_data = { - .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 | - PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/, - .mclk_10khz = 1000, -}; - -#include <linux/platform_data/pca953x.h> - -static struct pca953x_platform_data pca9536_data = { - .gpio_base = PXA_NR_BUILTIN_GPIO, -}; - -static int gpio_bus_switch = -EINVAL; - -static int pcm990_camera_set_bus_param(struct soc_camera_link *link, - unsigned long flags) -{ - if (gpio_bus_switch < 0) { - if (flags == SOCAM_DATAWIDTH_10) - return 0; - else - return -EINVAL; - } - - if (flags & SOCAM_DATAWIDTH_8) - gpio_set_value_cansleep(gpio_bus_switch, 1); - else - gpio_set_value_cansleep(gpio_bus_switch, 0); - - return 0; -} - -static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link) -{ - int ret; - - if (gpio_bus_switch < 0) { - ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera"); - if (!ret) { - gpio_bus_switch = PXA_NR_BUILTIN_GPIO; - gpio_direction_output(gpio_bus_switch, 0); - } - } - - if (gpio_bus_switch >= 0) - return SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_10; - else - return SOCAM_DATAWIDTH_10; -} - -static void pcm990_camera_free_bus(struct soc_camera_link *link) -{ - if (gpio_bus_switch < 0) - return; - - gpio_free(gpio_bus_switch); - gpio_bus_switch = -EINVAL; -} - -/* Board I2C devices. */ -static struct i2c_board_info __initdata pcm990_i2c_devices[] = { - { - /* Must initialize before the camera(s) */ - I2C_BOARD_INFO("pca9536", 0x41), - .platform_data = &pca9536_data, - }, -}; - -static struct mt9v022_platform_data mt9v022_pdata = { - .y_skip_top = 1, -}; - -static struct i2c_board_info pcm990_camera_i2c[] = { - { - I2C_BOARD_INFO("mt9v022", 0x48), - }, { - I2C_BOARD_INFO("mt9m001", 0x5d), - }, -}; - -static struct soc_camera_link iclink[] = { - { - .bus_id = 0, /* Must match with the camera ID */ - .board_info = &pcm990_camera_i2c[0], - .priv = &mt9v022_pdata, - .i2c_adapter_id = 0, - .query_bus_param = pcm990_camera_query_bus_param, - .set_bus_param = pcm990_camera_set_bus_param, - .free_bus = pcm990_camera_free_bus, - }, { - .bus_id = 0, /* Must match with the camera ID */ - .board_info = &pcm990_camera_i2c[1], - .i2c_adapter_id = 0, - .query_bus_param = pcm990_camera_query_bus_param, - .set_bus_param = pcm990_camera_set_bus_param, - .free_bus = pcm990_camera_free_bus, - }, -}; - -static struct platform_device pcm990_camera[] = { - { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &iclink[0], - }, - }, { - .name = "soc-camera-pdrv", - .id = 1, - .dev = { - .platform_data = &iclink[1], - }, - }, -}; -#endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */ - -/* * system init for baseboard usage. Will be called by pcm027 init. * * Add platform devices present on this baseboard and init @@ -551,15 +404,5 @@ void __init pcm990_baseboard_init(void) pxa_set_i2c_info(NULL); pxa_set_ac97_info(NULL); -#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) - pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config)); - pxa_set_camera_info(&pcm990_pxacamera_platform_data); - - i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices)); - - platform_device_register(&pcm990_camera[0]); - platform_device_register(&pcm990_camera[1]); -#endif - printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n"); } diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index c6550eddfce1..efa402025031 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -202,7 +202,8 @@ static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma) static vm_fault_t __kprobes __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, - unsigned int flags, struct task_struct *tsk) + unsigned int flags, struct task_struct *tsk, + struct pt_regs *regs) { struct vm_area_struct *vma; vm_fault_t fault; @@ -224,7 +225,7 @@ good_area: goto out; } - return handle_mm_fault(vma, addr & PAGE_MASK, flags); + return handle_mm_fault(vma, addr & PAGE_MASK, flags, regs); check_stack: /* Don't allow expansion below FIRST_USER_ADDRESS */ @@ -266,6 +267,8 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if ((fsr & FSR_WRITE) && !(fsr & FSR_CM)) flags |= FAULT_FLAG_WRITE; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr); + /* * As per x86, we may deadlock here. However, since the kernel only * validly references user space from well defined areas of the code, @@ -290,7 +293,7 @@ retry: #endif } - fault = __do_page_fault(mm, addr, fsr, flags, tsk); + fault = __do_page_fault(mm, addr, fsr, flags, tsk, regs); /* If we need to retry but a fatal signal is pending, handle the * signal first. We do not need to release the mmap_lock because @@ -302,23 +305,7 @@ retry: return 0; } - /* - * Major/minor page fault accounting is only done on the - * initial attempt. If we go through a retry, it is extremely - * likely that the page will be found in page cache at that point. - */ - - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr); if (!(fault & VM_FAULT_ERROR) && flags & FAULT_FLAG_ALLOW_RETRY) { - if (fault & VM_FAULT_MAJOR) { - tsk->maj_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, - regs, addr); - } else { - tsk->min_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, - regs, addr); - } if (fault & VM_FAULT_RETRY) { flags |= FAULT_FLAG_TRIED; goto retry; diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c index a1e5aace897a..dd7a0277c5c0 100644 --- a/arch/arm/mm/hugetlbpage.c +++ b/arch/arm/mm/hugetlbpage.c @@ -17,7 +17,6 @@ #include <asm/mman.h> #include <asm/tlb.h> #include <asm/tlbflush.h> -#include <asm/pgalloc.h> /* * On ARM, huge pages are backed by pmd's rather than pte's, so we do a lot diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 01e18e43b174..000c1b48e973 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -243,13 +243,8 @@ void __init bootmem_init(void) (phys_addr_t)max_low_pfn << PAGE_SHIFT); /* - * Sparsemem tries to allocate bootmem in memory_present(), - * so must be done after the fixed reservations - */ - memblocks_present(); - - /* - * sparse_init() needs the bootmem allocator up and running. + * sparse_init() tries to allocate memory from memblock, so must be + * done after the fixed reservations */ sparse_init(); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index bcd82614c25d..c36f977b2ccb 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -29,6 +29,7 @@ #include <asm/traps.h> #include <asm/procinfo.h> #include <asm/memory.h> +#include <asm/pgalloc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -74,8 +75,6 @@ struct cachepolicy { pteval_t pte; }; -unsigned long kimage_voffset __ro_after_init; - static struct cachepolicy cache_policies[] __initdata = { { .policy = "uncached", @@ -1654,9 +1653,6 @@ void __init paging_init(const struct machine_desc *mdesc) empty_zero_page = virt_to_page(zero_page); __flush_dcache_page(NULL, empty_zero_page); - - /* Compute the virt/idmap offset, mostly for the sake of KVM */ - kimage_voffset = (unsigned long)&kimage_voffset - virt_to_idmap(&kimage_voffset); } void __init early_mm_init(const struct machine_desc *mdesc) diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 60ac7c5999a9..e2c743aa2eb2 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -5,7 +5,6 @@ * VMA_VM_FLAGS * VM_EXEC */ -#include <linux/const.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> @@ -31,8 +30,7 @@ * act_mm - get current->active_mm */ .macro act_mm, rd - bic \rd, sp, #(THREAD_SIZE - 1) & ~63 - bic \rd, \rd, #63 + get_thread_info \rd ldr \rd, [\rd, #TI_TASK] .if (TSK_ACTIVE_MM > IMM12_MASK) add \rd, \rd, #TSK_ACTIVE_MM & ~IMM12_MASK diff --git a/arch/arm/vfp/Makefile b/arch/arm/vfp/Makefile index 9975b63ac3b0..749901a72d6d 100644 --- a/arch/arm/vfp/Makefile +++ b/arch/arm/vfp/Makefile @@ -8,6 +8,4 @@ # ccflags-y := -DDEBUG # asflags-y := -DDEBUG -KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp -mfloat-abi=soft) - obj-y += vfpmodule.o entry.o vfphw.o vfpsingle.o vfpdouble.o diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index b2e560290860..4fcff9f59947 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -78,6 +78,7 @@ ENTRY(vfp_support_entry) DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10 + .fpu vfpv2 ldr r3, [sp, #S_PSR] @ Neither lazy restore nor FP exceptions and r3, r3, #MODE_MASK @ are supported in kernel mode teq r3, #USR_MODE @@ -258,11 +259,14 @@ vfp_current_hw_state_address: ENTRY(vfp_get_float) tbl_branch r0, r3, #3 + .fpu vfpv2 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 -1: mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0 +1: vmov r0, s\dr ret lr .org 1b + 8 -1: mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1 + .endr + .irp dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 +1: vmov r0, s\dr ret lr .org 1b + 8 .endr @@ -270,11 +274,14 @@ ENDPROC(vfp_get_float) ENTRY(vfp_put_float) tbl_branch r1, r3, #3 + .fpu vfpv2 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 -1: mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0 +1: vmov s\dr, r0 ret lr .org 1b + 8 -1: mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1 + .endr + .irp dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 +1: vmov s\dr, r0 ret lr .org 1b + 8 .endr @@ -282,15 +289,17 @@ ENDPROC(vfp_put_float) ENTRY(vfp_get_double) tbl_branch r0, r3, #3 + .fpu vfpv2 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 -1: fmrrd r0, r1, d\dr +1: vmov r0, r1, d\dr ret lr .org 1b + 8 .endr #ifdef CONFIG_VFPv3 @ d16 - d31 registers - .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 -1: mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr + .fpu vfpv3 + .irp dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 +1: vmov r0, r1, d\dr ret lr .org 1b + 8 .endr @@ -304,15 +313,17 @@ ENDPROC(vfp_get_double) ENTRY(vfp_put_double) tbl_branch r2, r3, #3 + .fpu vfpv2 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 -1: fmdrr d\dr, r0, r1 +1: vmov d\dr, r0, r1 ret lr .org 1b + 8 .endr #ifdef CONFIG_VFPv3 + .fpu vfpv3 @ d16 - d31 registers - .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 -1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr + .irp dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 +1: vmov d\dr, r0, r1 ret lr .org 1b + 8 .endr diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h index 38dc154e39ff..3c7938fd40aa 100644 --- a/arch/arm/vfp/vfpinstr.h +++ b/arch/arm/vfp/vfpinstr.h @@ -62,10 +62,23 @@ #define FPSCR_C (1 << 29) #define FPSCR_V (1 << 28) -/* - * Since we aren't building with -mfpu=vfp, we need to code - * these instructions using their MRC/MCR equivalents. - */ +#ifdef CONFIG_AS_VFP_VMRS_FPINST + +#define fmrx(_vfp_) ({ \ + u32 __v; \ + asm(".fpu vfpv2\n" \ + "vmrs %0, " #_vfp_ \ + : "=r" (__v) : : "cc"); \ + __v; \ + }) + +#define fmxr(_vfp_,_var_) \ + asm(".fpu vfpv2\n" \ + "vmsr " #_vfp_ ", %0" \ + : : "r" (_var_) : "cc") + +#else + #define vfpreg(_vfp_) #_vfp_ #define fmrx(_vfp_) ({ \ @@ -79,6 +92,8 @@ asm("mcr p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr " #_vfp_ ", %0" \ : : "r" (_var_) : "cc") +#endif + u32 vfp_single_cpdo(u32 inst, u32 fpscr); u32 vfp_single_cprt(u32 inst, u32 fpscr, struct pt_regs *regs); diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index d40e9e5fc52b..396797ffe2b1 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only #include <linux/cpu.h> +#include <linux/dma-direct.h> #include <linux/dma-noncoherent.h> #include <linux/gfp.h> #include <linux/highmem.h> @@ -42,15 +43,18 @@ unsigned long xen_get_swiotlb_free_pages(unsigned int order) static bool hypercall_cflush = false; /* buffers in highmem or foreign pages cannot cross page boundaries */ -static void dma_cache_maint(dma_addr_t handle, size_t size, u32 op) +static void dma_cache_maint(struct device *dev, dma_addr_t handle, + size_t size, u32 op) { struct gnttab_cache_flush cflush; - cflush.a.dev_bus_addr = handle & XEN_PAGE_MASK; cflush.offset = xen_offset_in_page(handle); cflush.op = op; + handle &= XEN_PAGE_MASK; do { + cflush.a.dev_bus_addr = dma_to_phys(dev, handle); + if (size + cflush.offset > XEN_PAGE_SIZE) cflush.length = XEN_PAGE_SIZE - cflush.offset; else @@ -59,7 +63,7 @@ static void dma_cache_maint(dma_addr_t handle, size_t size, u32 op) HYPERVISOR_grant_table_op(GNTTABOP_cache_flush, &cflush, 1); cflush.offset = 0; - cflush.a.dev_bus_addr += cflush.length; + handle += cflush.length; size -= cflush.length; } while (size); } @@ -71,24 +75,20 @@ static void dma_cache_maint(dma_addr_t handle, size_t size, u32 op) * pfn_valid returns true the pages is local and we can use the native * dma-direct functions, otherwise we call the Xen specific version. */ -void xen_dma_sync_for_cpu(dma_addr_t handle, phys_addr_t paddr, size_t size, - enum dma_data_direction dir) +void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir) { - if (pfn_valid(PFN_DOWN(handle))) - arch_sync_dma_for_cpu(paddr, size, dir); - else if (dir != DMA_TO_DEVICE) - dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL); + if (dir != DMA_TO_DEVICE) + dma_cache_maint(dev, handle, size, GNTTAB_CACHE_INVAL); } -void xen_dma_sync_for_device(dma_addr_t handle, phys_addr_t paddr, size_t size, - enum dma_data_direction dir) +void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir) { - if (pfn_valid(PFN_DOWN(handle))) - arch_sync_dma_for_device(paddr, size, dir); - else if (dir == DMA_FROM_DEVICE) - dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL); + if (dir == DMA_FROM_DEVICE) + dma_cache_maint(dev, handle, size, GNTTAB_CACHE_INVAL); else - dma_cache_maint(handle, size, GNTTAB_CACHE_CLEAN); + dma_cache_maint(dev, handle, size, GNTTAB_CACHE_CLEAN); } bool xen_arch_need_swiotlb(struct device *dev, @@ -96,7 +96,7 @@ bool xen_arch_need_swiotlb(struct device *dev, dma_addr_t dev_addr) { unsigned int xen_pfn = XEN_PFN_DOWN(phys); - unsigned int bfn = XEN_PFN_DOWN(dev_addr); + unsigned int bfn = XEN_PFN_DOWN(dma_to_phys(dev, dev_addr)); /* * The swiotlb buffer should be used if |