diff options
Diffstat (limited to 'arch/arm')
2683 files changed, 26222 insertions, 27178 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 26524b75970a..8869742a85df 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2,22 +2,26 @@ config ARM bool default y + select ARCH_32BIT_OFF_T select ARCH_CLOCKSOURCE_DATA - select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID && !KEXEC select ARCH_HAS_DEBUG_VIRTUAL if MMU select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_FORTIFY_SOURCE + select ARCH_HAS_KEEPINITRD select ARCH_HAS_KCOV select ARCH_HAS_MEMBARRIER_SYNC_CORE select ARCH_HAS_PTE_SPECIAL if ARM_LPAE select ARCH_HAS_PHYS_TO_DMA + select ARCH_HAS_SETUP_DMA_OPS select ARCH_HAS_SET_MEMORY select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL select ARCH_HAS_STRICT_MODULE_RWX if MMU + select ARCH_HAS_TEARDOWN_DMA_OPS if MMU select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_HAS_GCOV_PROFILE_ALL + select ARCH_KEEP_MEMBLOCK if HAVE_ARCH_PFN_VALID || KEXEC select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX @@ -30,6 +34,7 @@ config ARM select CLONE_BACKWARDS select CPU_PM if SUSPEND || CPU_IDLE select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS + select DMA_DECLARE_COHERENT select DMA_REMAP if MMU select EDAC_SUPPORT select EDAC_ATOMIC_SCRUB @@ -69,10 +74,9 @@ config ARM select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU select HAVE_EXIT_THREAD select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL - select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL + select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG select HAVE_FUNCTION_TRACER if !XIP_KERNEL select HAVE_GCC_PLUGINS - select HAVE_GENERIC_DMA_COHERENT select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7) select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_IRQ_TIME_ACCOUNTING @@ -101,7 +105,6 @@ config ARM select MODULES_USE_ELF_REL select NEED_DMA_MAP_STATE select OF_EARLY_FLATTREE if OF - select OF_RESERVED_MEM if OF select OLD_SIGACTION select OLD_SIGSUSPEND3 select PCI_SYSCALL if PCI @@ -176,10 +179,6 @@ config TRACE_IRQFLAGS_SUPPORT bool default !CPU_V7M -config RWSEM_XCHGADD_ALGORITHM - bool - default y - config ARCH_HAS_ILOG2_U32 bool @@ -427,12 +426,15 @@ config ARCH_IXP4XX depends on MMU select ARCH_HAS_DMA_SET_COHERENT_MASK select ARCH_SUPPORTS_BIG_ENDIAN - select CLKSRC_MMIO select CPU_XSCALE select DMABOUNCE if PCI select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_MULTI_HANDLER + select GPIO_IXP4XX select GPIOLIB select HAVE_PCI + select IXP4XX_IRQ + select IXP4XX_TIMER select NEED_MACH_IO_H select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO @@ -589,11 +591,14 @@ config ARCH_DAVINCI select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP + select GENERIC_IRQ_MULTI_HANDLER select GPIOLIB select HAVE_IDE select PM_GENERIC_DOMAINS if PM select PM_GENERIC_DOMAINS_OF if PM && OF + select REGMAP_MMIO select RESET_CONTROLLER + select SPARSE_IRQ select USE_OF select ZONE_DMA help @@ -750,6 +755,8 @@ source "arch/arm/mach-mediatek/Kconfig" source "arch/arm/mach-meson/Kconfig" +source "arch/arm/mach-milbeaut/Kconfig" + source "arch/arm/mach-mmp/Kconfig" source "arch/arm/mach-moxart/Kconfig" @@ -893,8 +900,6 @@ config PLAT_PXA config PLAT_VERSATILE bool -source "arch/arm/firmware/Kconfig" - source "arch/arm/mm/Kconfig" config IWMMXT @@ -1304,7 +1309,7 @@ config SCHED_SMT config HAVE_ARM_SCU bool help - This option enables support for the ARM system coherency unit + This option enables support for the ARM snoop control unit config HAVE_ARM_ARCH_TIMER bool "Architected timer support" @@ -1316,7 +1321,6 @@ config HAVE_ARM_ARCH_TIMER config HAVE_ARM_TWD bool - select TIMER_OF if OF help This options enables support for the ARM timer and watchdog unit diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index 1168a03c8525..36c80d3dd93f 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -20,10 +20,12 @@ config DRAM_SIZE config FLASH_MEM_BASE hex 'FLASH Base Address' if SET_MEM_PARAM + depends on CPU_ARM740T || CPU_ARM946E || CPU_ARM940T default 0x00400000 config FLASH_SIZE hex 'FLASH Size' if SET_MEM_PARAM + depends on CPU_ARM740T || CPU_ARM946E || CPU_ARM940T default 0x00400000 config PROCESSOR_ID diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 6d6e0330930b..9a8862fee738 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -47,8 +47,8 @@ config DEBUG_WX choice prompt "Choose kernel unwinder" - default UNWINDER_ARM if AEABI && !FUNCTION_GRAPH_TRACER - default UNWINDER_FRAME_POINTER if !AEABI || FUNCTION_GRAPH_TRACER + default UNWINDER_ARM if AEABI + default UNWINDER_FRAME_POINTER if !AEABI help This determines which method will be used for unwinding kernel stack traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack, @@ -65,7 +65,7 @@ config UNWINDER_FRAME_POINTER config UNWINDER_ARM bool "ARM EABI stack unwinder" - depends on AEABI + depends on AEABI && !FUNCTION_GRAPH_TRACER select ARM_UNWIND help This option enables stack unwinding support in the kernel @@ -1676,6 +1676,7 @@ config DEBUG_UART_PHYS default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1 default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4 default 0xe8008000 if DEBUG_R7S72100_SCIF2 + default 0xf0000000 if DEBUG_DIGICOLOR_UA0 default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE @@ -1727,6 +1728,7 @@ config DEBUG_UART_VIRT default 0xe0010fe0 if ARCH_RPC default 0xf0000be0 if ARCH_EBSA110 default 0xf0010000 if DEBUG_ASM9260_UART + default 0xf0100000 if DEBUG_DIGICOLOR_UA0 default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 default 0xf1000300 if DEBUG_BCM_5301X diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 9db3c584b2cb..f863c6935d0e 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -10,7 +10,7 @@ # # Copyright (C) 1995-2001 by Russell King -LDFLAGS_vmlinux :=-p --no-undefined -X --pic-veneer +LDFLAGS_vmlinux := --no-undefined -X --pic-veneer ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 KBUILD_LDFLAGS_MODULE += --be8 @@ -116,8 +116,7 @@ endif AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) ifeq ($(CONFIG_THUMB2_KERNEL),y) -AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it) -CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) +CFLAGS_ISA :=-mthumb -Wa,-mimplicit-it=always $(AFLAGS_NOWARN) AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb # Work around buggy relocation from gas if requested: ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) @@ -190,6 +189,7 @@ machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_MXC) += imx machine-$(CONFIG_ARCH_MEDIATEK) += mediatek +machine-$(CONFIG_ARCH_MILBEAUT) += milbeaut machine-$(CONFIG_ARCH_MXS) += mxs machine-$(CONFIG_ARCH_NETX) += netx machine-$(CONFIG_ARCH_NOMADIK) += nomadik @@ -289,7 +289,6 @@ core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ core-y += arch/arm/probes/ core-y += arch/arm/net/ core-y += arch/arm/crypto/ -core-y += arch/arm/firmware/ core-y += $(machdirs) $(platdirs) drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile index 83e1a076a5d6..981a8d03f064 100644 --- a/arch/arm/boot/bootp/Makefile +++ b/arch/arm/boot/bootp/Makefile @@ -8,7 +8,7 @@ GCOV_PROFILE := n -LDFLAGS_bootp :=-p --no-undefined -X \ +LDFLAGS_bootp := --no-undefined -X \ --defsym initrd_phys=$(INITRD_PHYS) \ --defsym params_phys=$(PARAMS_PHYS) -T AFLAGS_initrd.o :=-DINITRD=\"$(INITRD)\" diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S index 78b508075161..5c476bd2b4ce 100644 --- a/arch/arm/boot/bootp/init.S +++ b/arch/arm/boot/bootp/init.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/boot/bootp/init.S * * Copyright (C) 2000-2003 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * "Header" file for splitting kernel + initrd. Note that we pass * r0 through to r3 straight through. * @@ -44,7 +41,7 @@ _start: add lr, pc, #-0x8 @ lr = current load addr */ movne r10, #0 @ terminator movne r4, #2 @ Size of this entry (2 words) - stmneia r9, {r4, r5, r10} @ Size, ATAG_CORE, terminator + stmiane r9, {r4, r5, r10} @ Size, ATAG_CORE, terminator /* * find the end of the tag list, and then add an INITRD tag on the end. diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 6114ae6ea466..9219389bbe61 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -132,8 +132,6 @@ endif ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 endif -# ? -LDFLAGS_vmlinux += -p # Report unresolved symbol references LDFLAGS_vmlinux += --no-undefined # Delete all temporary local symbols diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index c16c1829a5e4..aa075d8372ea 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -32,6 +32,7 @@ extern char * strstr(const char * s1, const char *s2); extern size_t strlen(const char *s); extern int memcmp(const void *cs, const void *ct, size_t count); +extern char * strchrnul(const char *, int); #ifdef CONFIG_KERNEL_GZIP #include "../../../../lib/decompress_inflate.c" diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S index c94a88ae834d..a5983588f96b 100644 --- a/arch/arm/boot/compressed/efi-header.S +++ b/arch/arm/boot/compressed/efi-header.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2013-2017 Linaro Ltd * Authors: Roy Franz <roy.franz@linaro.org> * Ard Biesheuvel <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/pe.h> diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6c7ccb428c07..e59d14679fb0 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/boot/compressed/head.S * * Copyright (C) 1996-2002 Russell King * Copyright (C) 2004 Hyok S. Choi (MPU support) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -1438,7 +1435,21 @@ ENTRY(efi_stub_entry) @ Preserve return value of efi_entry() in r4 mov r4, r0 - bl cache_clean_flush + + @ our cache maintenance code relies on CP15 barrier instructions + @ but since we arrived here with the MMU and caches configured + @ by UEFI, we must check that the CP15BEN bit is set in SCTLR. + @ Note that this bit is RAO/WI on v6 and earlier, so the ISB in + @ the enable path will be executed on v7+ only. + mrc p15, 0, r1, c1, c0, 0 @ read SCTLR + tst r1, #(1 << 5) @ CP15BEN bit set? + bne 0f + orr r1, r1, #(1 << 5) @ CP15 barrier instructions + mcr p15, 0, r1, c1, c0, 0 @ write SCTLR + ARM( .inst 0xf57ff06f @ v7+ isb ) + THUMB( isb ) + +0: bl cache_clean_flush bl cache_off @ Set parameters for booting zImage according to boot protocol diff --git a/arch/arm/boot/compressed/ll_char_wr.S b/arch/arm/boot/compressed/ll_char_wr.S index 8517c8606b4a..1ec8cb2898b1 100644 --- a/arch/arm/boot/compressed/ll_char_wr.S +++ b/arch/arm/boot/compressed/ll_char_wr.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/ll_char_wr.S * * Copyright (C) 1995, 1996 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Speedups & 1bpp code (C) 1996 Philip Blundell & Russell King. * * 10-04-96 RMK Various cleanups & reduced register usage. @@ -75,7 +72,7 @@ Lrow4bpplp: tst r1, #7 @ avoid using r7 directly after str r7, [r0, -r5]! subne r1, r1, #1 - ldrneb r7, [r6, r1] + ldrbne r7, [r6, r1] bne Lrow4bpplp ldmfd sp!, {r4 - r7, pc} @@ -103,7 +100,7 @@ Lrow8bpplp: sub r0, r0, r5 @ avoid ip stmia r0, {r4, ip} subne r1, r1, #1 - ldrneb r7, [r6, r1] + ldrbne r7, [r6, r1] bne Lrow8bpplp ldmfd sp!, {r4 - r7, pc} diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S index 2b963d8e76dd..fc7ed03d8b93 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.S +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifdef CONFIG_CPU_ENDIAN_BE8 diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh index b7fa67d2d9e3..40937248cebe 100755 --- a/arch/arm/boot/deflate_xip_data.sh +++ b/arch/arm/boot/deflate_xip_data.sh @@ -1,13 +1,11 @@ #!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only # XIP kernel .data segment compressor # # Created by: Nicolas Pitre, August 2017 # Copyright: (C) 2017 Linaro Limited # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License version 2 as -# published by the Free Software Foundation. # This script locates the start of the .data section in xipImage and # substitutes it with a compressed version. The needed offsets are obtained diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index bd40148a15b2..dab2914fa293 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -79,6 +79,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-a-plus.dtb \ bcm2835-rpi-cm1-io1.dtb \ bcm2836-rpi-2-b.dtb \ + bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb \ @@ -115,6 +116,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-luxul-xwr-3100.dtb \ bcm47094-luxul-xwr-3150-v1.dtb \ bcm47094-netgear-r8500.dtb \ + bcm47094-phicomm-k3.dtb \ bcm94708.dtb \ bcm94709.dtb \ bcm953012er.dtb \ @@ -227,6 +229,9 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \ dtb-$(CONFIG_ARCH_INTEGRATOR) += \ integratorap.dtb \ integratorcp.dtb +dtb-$(CONFIG_ARCH_IXP4XX) += \ + intel-ixp42x-linksys-nslu2.dtb \ + intel-ixp43x-gateworks-gw2358.dtb dtb-$(CONFIG_ARCH_KEYSTONE) += \ keystone-k2hk-evm.dtb \ keystone-k2l-evm.dtb \ @@ -313,7 +318,8 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ dtb-$(CONFIG_ARCH_LPC18XX) += \ lpc4337-ciaa.dtb \ lpc4350-hitex-eval.dtb \ - lpc4357-ea4357-devkit.dtb + lpc4357-ea4357-devkit.dtb \ + lpc4357-myd-lpc4357.dtb dtb-$(CONFIG_ARCH_LPC32XX) += \ lpc3250-ea3250.dtb \ lpc3250-phy3250.dtb @@ -360,7 +366,8 @@ dtb-$(CONFIG_SOC_IMX35) += \ imx35-eukrea-mbimxsd35-baseboard.dtb \ imx35-pdk.dtb dtb-$(CONFIG_SOC_IMX50) += \ - imx50-evk.dtb + imx50-evk.dtb \ + imx50-kobo-aura.dtb dtb-$(CONFIG_SOC_IMX51) += \ imx51-apf51.dtb \ imx51-apf51dev.dtb \ @@ -377,6 +384,7 @@ dtb-$(CONFIG_SOC_IMX53) += \ imx53-kp-ddc.dtb \ imx53-kp-hsc.dtb \ imx53-m53evk.dtb \ + imx53-m53menlo.dtb \ imx53-mba53.dtb \ imx53-ppd.dtb \ imx53-qsb.dtb \ @@ -397,6 +405,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ imx6dl-dfi-fs700-m60.dtb \ + imx6dl-eckelmann-ci4x10.dtb \ imx6dl-emcon-avari.dtb \ imx6dl-gw51xx.dtb \ imx6dl-gw52xx.dtb \ @@ -445,6 +454,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ imx6dl-wandboard-revd1.dtb \ + imx6dl-yapp4-draco.dtb \ + imx6dl-yapp4-hydra.dtb \ + imx6dl-yapp4-ursa.dtb \ imx6q-apalis-eval.dtb \ imx6q-apalis-ixora.dtb \ imx6q-apalis-ixora-v1.1.dtb \ @@ -561,6 +573,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-opos6uldev.dtb \ imx6ul-pico-hobbit.dtb \ imx6ul-pico-pi.dtb \ + imx6ul-phytec-phyboard-segin-full.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ @@ -572,6 +585,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ + imx7d-mba7.dtb \ imx7d-nitrogen7.dtb \ imx7d-pico-hobbit.dtb \ imx7d-pico-pi.dtb \ @@ -579,7 +593,9 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-sdb.dtb \ imx7d-sdb-reva.dtb \ imx7d-sdb-sht11.dtb \ + imx7d-zii-rpu2.dtb \ imx7s-colibri-eval-v3.dtb \ + imx7s-mba7.dtb \ imx7s-warp.dtb dtb-$(CONFIG_SOC_IMX7ULP) += \ imx7ulp-evk.dtb @@ -599,6 +615,8 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-zii-dev-rev-b.dtb \ vf610-zii-dev-rev-c.dtb \ vf610-zii-scu4-aib.dtb \ + vf610-zii-spb4.dtb \ + vf610-zii-ssmb-dtu.dtb \ vf610-zii-ssmb-spu3.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ @@ -700,6 +718,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-thunder.dtb \ omap3-zoom3.dtb dtb-$(CONFIG_SOC_TI81XX) += \ + am3874-iceboard.dtb \ dm8148-evm.dtb \ dm8148-t410.dtb \ dm8168-evm.dtb \ @@ -719,6 +738,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-cm-t335.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ + am335x-guardian.dtb \ am335x-icev2.dtb \ am335x-lxm.dtb \ am335x-moxa-uc-2101.dtb \ @@ -843,6 +863,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r7s72100-genmai.dtb \ r7s72100-gr-peach.dtb \ r7s72100-rskrza1.dtb \ + r7s9210-rza2mevb.dtb \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ r8a7743-iwg20d-q7.dtb \ @@ -868,6 +889,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r9a06g032-rzn1d400-db.dtb \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ + rv1108-elgin-r1.dtb \ rv1108-evb.dtb \ rk3036-evb.dtb \ rk3036-kylin.dtb \ @@ -897,6 +919,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-mickey.dtb \ + rk3288-veyron-mighty.dtb \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ rk3288-veyron-speedy.dtb \ @@ -919,6 +942,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria10_socdk_nand.dtb \ socfpga_arria10_socdk_qspi.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ + socfpga_cyclone5_chameleon96.dtb \ socfpga_cyclone5_mcvevk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_de0_nano_soc.dtb \ @@ -951,6 +975,8 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32746g-eval.dtb \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ + stm32mp157a-dk1.dtb \ + stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb dtb-$(CONFIG_MACH_SUN4I) += \ @@ -1078,6 +1104,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-h3-orangepi-zero-plus2.dtb \ + sun8i-h3-rervision-dvk.dtb \ sun8i-r16-bananapi-m2m.dtb \ sun8i-r16-nintendo-nes-classic.dtb \ sun8i-r16-nintendo-super-nes-classic.dtb \ @@ -1233,6 +1260,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt7623n-bananapi-bpi-r2.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb +dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts index 888bfcd4a402..742fcf525e1b 100644 --- a/arch/arm/boot/dts/aks-cdu.dts +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * aks-cdu.dts - Device Tree file for AK signal CDU * * Copyright (C) 2012 AK signal Brno a.s. * 2012 Jiri Prchal <jiri.prchal@aksignal.cz> - * - * Licensed under GPLv2 or later. */ /dts-v1/; diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale-asm9260.dtsi index 907fc7bfc418..2ce6038536fd 100644 --- a/arch/arm/boot/dts/alphascale-asm9260.dtsi +++ b/arch/arm/boot/dts/alphascale-asm9260.dtsi @@ -4,10 +4,11 @@ * Licensed under the X11 license or the GPL v2 (or later) */ -#include "skeleton.dtsi" #include <dt-bindings/clock/alphascale,asm9260.h> / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&icoll>; memory { diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi index 731df7a8c4e6..d3036ea823d1 100644 --- a/arch/arm/boot/dts/alpine.dtsi +++ b/arch/arm/boot/dts/alpine.dtsi @@ -25,12 +25,18 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton64.dtsi" / { + #address-cells = <2>; + #size-cells = <2>; /* SOC compatibility */ compatible = "al,alpine"; + memory { + device_type = "memory"; + reg = <0 0 0 0>; + }; + /* CPU Configuration */ cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts index 75de1e723303..49e46baf9542 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* @@ -23,14 +20,14 @@ &am33xx_pinmux { uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ >; }; }; @@ -72,7 +69,3 @@ dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; - -&phy_sel { - rmii-clock-ext = <1>; -}; diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts index 1b215c425c57..9e88bc2f6465 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* @@ -23,35 +20,35 @@ &am33xx_pinmux { tca6416_pins: pinmux_tca6416_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ - AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */ - AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ - - AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ + + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ >; }; }; @@ -114,7 +111,3 @@ dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; - -&phy_sel { - rmii-clock-ext = <1>; -}; diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 832ead864dc5..28aa00422951 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* @@ -23,43 +20,43 @@ &am33xx_pinmux { tca6416_pins: pinmux_tca6416_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ >; }; dcan1_pins: pinmux_dcan1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.dcan1_tx_mux0 */ - AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2) /* uart0_rtsn.dcan1_rx_mux0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.dcan1_tx_mux0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* uart0_rtsn.dcan1_rx_mux0 */ >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ - AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */ - AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ - - AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ + + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ >; }; @@ -133,10 +130,6 @@ phy-handle = <&phy1>; }; -&phy_sel { - rmii-clock-ext = <1>; -}; - &dcan1 { pinctrl-names = "default"; pinctrl-0 = <&dcan1_pins>; diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi index 3ab1767d5c13..4e11a160d88f 100644 --- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi +++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* @@ -42,9 +39,9 @@ &am33xx_pinmux { user_leds: pinmux_user_leds { pinctrl-single,pins = < - AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 PWR LED */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_txd3.gpio0_16 WLAN LED */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_txd2.gpio0_17 APP LED */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 PWR LED */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_txd3.gpio0_16 WLAN LED */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_txd2.gpio0_17 APP LED */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index 8c6fc4161ad7..ed235f263e29 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* @@ -53,130 +50,130 @@ &am33xx_pinmux { mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */ - AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */ - AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */ - AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */ - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */ - AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */ + AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLUP, MUX_MODE7) /* emu0.gpio3[7] */ >; }; wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ + AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT_PULLUP, MUX_MODE7) /* emu1.gpio3[8] */ >; }; tps65910_pins: pinmux_tps65910_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_ben1.gpio1[28] */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */ - AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_tx_en.rmii1_txen */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */ /* Slave 2 */ - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ - AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* Slave 2 reset value*/ - AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; nandflash_pins_s0: nandflash_pins_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index 29782be07605..89c00ce42c26 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION * * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "am335x-igep0033.dtsi" @@ -46,39 +43,39 @@ &am33xx_pinmux { nxp_hdmi_pins: pinmux_nxp_hdmi_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) >; }; nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */ >; }; leds_base_pins: pinmux_leds_base_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn3.gpio2_0 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 456eef57ef89..89b4cf2cb7f8 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { @@ -71,118 +68,118 @@ user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio1_24 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0) >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spio0_cs1.gpio0_6 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spio0_cs1.gpio0_6 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) >; }; emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 6b8493720424..43bfbce41049 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi index e543c2bee8c2..7ad079861efd 100644 --- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/display/tda998x.h> @@ -30,43 +27,43 @@ &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) >; }; mcasp0_pins: mcasp0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ - AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts index 83f49f616b19..3124d94c0b3c 100644 --- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -32,35 +29,35 @@ &am33xx_pinmux { bt_pins: pinmux_bt_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_txd0.gpio0_28 - BT_EN */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gmii1_txd0.gpio0_28 - BT_EN */ >; }; mmc3_pins: pinmux_mmc3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */ - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */ - AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */ - AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ - AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */ - AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* gmii1_rxd2.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* mdio_data.uart3_ctsn */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* mdio_clk.uart3_rtsn */ >; }; wl18xx_pins: pinmux_wl18xx_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gmii1_txclk.gpio3_9 WL_EN */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk.gpio0_29 WL_IRQ */ - AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_rxclk.gpio3_10 LS_BUF_EN */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gmii1_txclk.gpio3_9 WL_EN */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_refclk.gpio0_29 WL_IRQ */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gmii1_rxclk.gpio3_10 LS_BUF_EN */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index d154d3133c16..d3928662aed4 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index ccb147e70d17..0257576d5d16 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -130,135 +127,135 @@ &am33xx_pinmux { user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ - AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ - AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ - AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */ - AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */ + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ >; }; /* UT0 */ uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; /* UT1 */ uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* (D16) uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (D15) uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; /* GPS */ uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE1) /* (A17) spi0_sclk.uart2_rxd */ - AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (B17) spi0_d0.uart2_txd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE1) /* (A17) spi0_sclk.uart2_rxd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (B17) spi0_d0.uart2_txd */ >; }; /* DSM2 */ uart4_pins: pinmux_uart4_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ >; }; /* UT5 */ uart5_pins: pinmux_uart5_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8C4, PIN_INPUT_PULLUP | MUX_MODE4) /* (U2) lcd_data9.uart5_rxd */ - AM33XX_IOPAD(0x8C0, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* (U1) lcd_data8.uart5_txd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* (U2) lcd_data9.uart5_rxd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* (U1) lcd_data8.uart5_txd */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* (U9) gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* (V9) gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* (U7) gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* (V7) gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* (R8) gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* (T8) gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* (U8) gpmc_ad4.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* (V8) gpmc_ad5.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* (R9) gpmc_ad6.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* (T9) gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* (U9) gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* (V9) gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* (U7) gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* (V7) gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* (R8) gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (T8) gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* (U8) gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* (V8) gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* (R9) gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* (T9) gpmc_ad7.mmc1_dat7 */ >; }; mmc3_pins: pinmux_mmc3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6) /* (L15) gmii1_rxd1.mmc2_clk */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6) /* (J16) gmii1_txen.mmc2_cmd */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5) /* (J17) gmii1_rxdv.mmc2_dat0 */ - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5) /* (J18) gmii1_txd3.mmc2_dat1 */ - AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5) /* (K15) gmii1_txd2.mmc2_dat2 */ - AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5) /* (H16) gmii1_col.mmc2_dat3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6) /* (L15) gmii1_rxd1.mmc2_clk */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6) /* (J16) gmii1_txen.mmc2_cmd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5) /* (J17) gmii1_rxdv.mmc2_dat0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5) /* (J18) gmii1_txd3.mmc2_dat1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5) /* (K15) gmii1_txd2.mmc2_dat2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5) /* (H16) gmii1_col.mmc2_dat3 */ >; }; bt_pins: pinmux_bt_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ - AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ - AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* (M17) mdio_data.uart3_ctsn */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* (M18) mdio_clk.uart3_rtsn */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* (M17) mdio_data.uart3_ctsn */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* (M18) mdio_clk.uart3_rtsn */ >; }; wl18xx_pins: pinmux_wl18xx_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */ - AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ >; }; /* DCAN */ dcan1_pins: pinmux_dcan1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2) /* (E17) uart0_rtsn.dcan1_rx */ - AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* (E18) uart0_ctsn.dcan1_tx */ - AM33XX_IOPAD(0x940, PIN_OUTPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* (E17) uart0_rtsn.dcan1_rx */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* (E18) uart0_ctsn.dcan1_tx */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi index 853e6d3a028d..7a8826633cef 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi +++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &ldo3_reg { @@ -27,8 +24,8 @@ &am33xx_pinmux { uart2_pins: uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts index 57731f0daf10..4092cd193b8a 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -32,35 +29,35 @@ &am33xx_pinmux { bt_pins: pinmux_bt_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN */ >; }; mmc3_pins: pinmux_mmc3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ - AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ - AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ - AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */ - AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* gmii1_rxd2.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* mdio_data.uart3_ctsn */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* mdio_clk.uart3_rtsn */ >; }; wl18xx_pins: pinmux_wl18xx_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x828, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN */ - AM33XX_IOPAD(0x82C, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ */ - AM33XX_IOPAD(0x87C, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 LS_BUF_EN */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 LS_BUF_EN */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts index a8b4d969ce2a..c12bb0717779 100644 --- a/arch/arm/boot/dts/am335x-bonegreen.dts +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index 9c2a947aacf5..8cd81dc0cc72 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ * Author: Rostislav Lisovy <lisovy@jablotron.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; #include "am335x-chilisom.dtsi" @@ -14,6 +11,10 @@ compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom", "ti,am33xx"; + chosen { + stdout-path = &uart0; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -37,79 +38,79 @@ &am33xx_pinmux { uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) /* mdio_clk.mdio_clk */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; usb1_drvvbus: usb1_drvvbus { pinctrl-single,pins = < - AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */ + AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; sd_pins: pinmux_sd_card { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; led_gpio_pins: led_gpio_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */ - AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */ + AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_OUTPUT, MUX_MODE7) /* emu0.gpio3_7 */ + AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT, MUX_MODE7) /* emu1.gpio3_8 */ >; }; }; @@ -151,10 +152,6 @@ phy-mode = "rmii"; }; -&phy_sel { - rmii-clock-ext; -}; - /* USB */ &usb { status = "okay"; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index 1b43ebd08b38..b31e2f7a4ad9 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ * Author: Rostislav Lisovy <lisovy@jablotron.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "am33xx.dtsi" #include <dt-bindings/interrupt-controller/irq.h> @@ -30,28 +27,28 @@ i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; nandflash_pins: nandflash_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE0) + + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; }; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index 2c724bb60417..ceecbfd29d2c 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335 * * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -94,108 +91,85 @@ i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) - /* i2c0_scl.i2c0_scl */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < /* uart0_ctsn.i2c1_sda */ - AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.i2c1_scl */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) >; }; gpio_led_pins: pinmux_gpio_led_pins { pinctrl-single,pins = < /* gpmc_csn3.gpio2_0 */ - AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE7) >; }; nandflash_pins: pinmux_nandflash_pins { pinctrl-single,pins = < - /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wpn.gpio0_30 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) - /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) - /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) - /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) - /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) - /* gpmc_ben0_cle.gpmc_ben0_cle */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) - /* uart0_txd.uart0_txd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) - /* uart1_rtsn.uart1_rtsn */ - AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) - /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) - /* uart1_txd.uart1_txd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; dcan0_pins: pinmux_dcan0_pins { pinctrl-single,pins = < /* uart1_ctsn.dcan0_tx */ - AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart1_rtsn.dcan0_rx */ - AM33XX_IOPAD(0x97C, PIN_INPUT | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2) >; }; dcan1_pins: pinmux_dcan1_pins { pinctrl-single,pins = < /* uart1_rxd.dcan1_tx */ - AM33XX_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT, MUX_MODE2) /* uart1_txd.dcan1_rx */ - AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE2) >; }; ecap0_pins: pinmux_ecap0_pins { pinctrl-single,pins = < - /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ - AM33XX_IOPAD(0x964, 0x0) + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0) >; }; @@ -203,96 +177,83 @@ pinctrl-single,pins = < /* Slave 1 */ /* mii1_tx_en.rgmii1_tctl */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < - /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) - /* mdio_clk.mdio_clk */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) - /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) - /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) - /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) - /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) - /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) >; }; spi0_pins: pinmux_spi0_pins { pinctrl-single,pins = < - /* spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0) - /* spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) - /* spi0_d1.spi0_d1 */ - AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0) - /* spi0_cs0.spi0_cs0 */ - AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) - /* spi0_cs1.spi0_cs1 */ - AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_OUTPUT, MUX_MODE0) >; }; @@ -300,7 +261,7 @@ bluetooth_pins: pinmux_bluetooth_pins { pinctrl-single,pins = < /* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */ - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLUP, MUX_MODE7) >; }; @@ -308,13 +269,13 @@ mcasp1_pins: pinmux_mcasp1_pins { pinctrl-single,pins = < /* MII1_CRS.mcasp1_aclkx */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* MII1_RX_ER.mcasp1_fsx */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* MII1_COL.mcasp1_axr2 */ - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE4) + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE4) /* RMII1_REF_CLK.mcasp1_axr3 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) >; }; @@ -322,9 +283,9 @@ wifi_pins: pinmux_wifi_pins { pinctrl-single,pins = < /* EMU1.gpio3_8 - WiFi IRQ */ - AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7) /* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */ - AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7) >; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index dce5be5df97b..a00145705c9b 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -57,6 +54,24 @@ enable-active-high; }; + /* TPS79501 */ + v1_8d_reg: fixedregulator-v1_8d { + compatible = "regulator-fixed"; + regulator-name = "v1_8d"; + vin-supply = <&vbat>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* TPS79501 */ + v3_3d_reg: fixedregulator-v3_3d { + compatible = "regulator-fixed"; + regulator-name = "v3_3d"; + vin-supply = <&vbat>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + matrix_keypad: matrix_keypad0 { compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; @@ -172,222 +187,222 @@ matrix_keypad_s0: matrix_keypad_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a9.gpio1_25 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a10.gpio1_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.gpio1_27 */ >; }; volume_keys_s0: volume_keys_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* spi0_sclk.gpio0_2 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* spi0_d0.gpio0_3 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d1.i2c1_sda */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_cs0.i2c1_scl */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; nandflash_pins_s0: nandflash_pins_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) >; }; ecap0_pins: backlight_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0) >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */ >; }; mmc3_pins: pinmux_mmc3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */ - AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */ - AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */ - AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */ - AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */ - AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */ >; }; wlan_pins: pinmux_wlan_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */ - AM33XX_IOPAD(0x99c, PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ - AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a0.gpio1_16 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT, MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */ >; }; lcd_pins_s0: lcd_pins_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ - AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ - AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ - AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ - AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ - AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) >; }; mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ - AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; }; mcasp1_pins_sleep: mcasp1_pins_sleep { pinctrl-single,pins = < - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ >; }; }; @@ -499,10 +514,10 @@ status = "okay"; /* Regulators */ - AVDD-supply = <&vaux2_reg>; - IOVDD-supply = <&vaux2_reg>; - DRVDD-supply = <&vaux2_reg>; - DVDD-supply = <&vbat>; + AVDD-supply = <&v3_3d_reg>; + IOVDD-supply = <&v3_3d_reg>; + DRVDD-supply = <&v3_3d_reg>; + DVDD-supply = <&v1_8d_reg>; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index b128998097ce..e28a5b82fdf3 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* @@ -73,6 +70,24 @@ enable-active-high; }; + /* TPS79518 */ + v1_8d_reg: fixedregulator-v1_8d { + compatible = "regulator-fixed"; + regulator-name = "v1_8d"; + vin-supply = <&vbat>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* TPS78633 */ + v3_3d_reg: fixedregulator-v3_3d { + compatible = "regulator-fixed"; + regulator-name = "v3_3d"; + vin-supply = <&vbat>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + leds { pinctrl-names = "default"; pinctrl-0 = <&user_leds_s0>; @@ -209,241 +224,241 @@ lcd_pins_default: lcd_pins_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ - AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ - AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ - AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ - AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ - AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) >; }; lcd_pins_sleep: lcd_pins_sleep { pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */ - AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */ - AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */ - AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */ - AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */ - AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad8.lcd_data23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad9.lcd_data22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad10.lcd_data21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad11.lcd_data20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.lcd_data19 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.lcd_data18 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.lcd_data17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.lcd_data16 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ - AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ - AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ - AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad4.gpio1_4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad5.gpio1_5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad6.gpio1_6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad7.gpio1_7 */ >; }; gpio_keys_s0: gpio_keys_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ - AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ - AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; ecap2_pins: backlight_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x99c, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, 0x0, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ /* Slave 2 */ - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ - AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* Slave 2 reset value*/ - AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */ >; }; mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ - AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; }; mcasp1_pins_sleep: mcasp1_pins_sleep { pinctrl-single,pins = < - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ >; }; wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 */ >; }; }; @@ -501,10 +516,10 @@ status = "okay"; /* Regulators */ - AVDD-supply = <&vaux2_reg>; - IOVDD-supply = <&vaux2_reg>; - DRVDD-supply = <&vaux2_reg>; - DVDD-supply = <&vbat>; + AVDD-supply = <&v3_3d_reg>; + IOVDD-supply = <&v3_3d_reg>; + DRVDD-supply = <&v3_3d_reg>; + DVDD-supply = <&v1_8d_reg>; }; }; diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts new file mode 100644 index 000000000000..c9611ea4b884 --- /dev/null +++ b/arch/arm/boot/dts/am335x-guardian.dts @@ -0,0 +1,511 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2018 Robert Bosch Power Tools GmbH + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Bosch AM335x Guardian"; + compatible = "bosch,am335x-guardian", "ti,am33xx"; + + chosen { + stdout-path = &uart0; + tick-timer = &timer2; + }; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + button21 { + label = "guardian-power-button"; + linux,code = <KEY_POWER>; + gpios = <&gpio2 21 0>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + led1 { + label = "green:heartbeat"; + gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:mmc0"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>; + pinctrl-1 = <&lcd_pins_sleep>; + + display-timings { + 320x240 { + hactive = <320>; + vactive = <240>; + hback-porch = <68>; + hfront-porch = <20>; + hsync-len = <1>; + vback-porch = <18>; + vfront-porch = <4>; + vsync-len = <1>; + clock-frequency = <9000000>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <24>; + bus-width = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + }; + + pwm7: dmtimer-pwm { + compatible = "ti,omap-dmtimer-pwm"; + ti,timers = <&timer7>; + pinctrl-names = "default"; + pinctrl-0 = <&dmtimer7_pins>; + }; + + vmmcsd_fixed: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cppi41dma { + status = "okay"; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; + ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ + status = "okay"; + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-ecc-opt = "bch16"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + /* + * MTD partition table + * + * All SPL-* partitions are sized to minimal length which can + * be independently programmable. For NAND flash this is equal + * to size of erase-block. + */ + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SPL"; + reg = <0x0 0x40000>; + }; + + partition@1 { + label = "SPL.backup1"; + reg = <0x40000 0x40000>; + }; + + partition@2 { + label = "SPL.backup2"; + reg = <0x80000 0x40000>; + }; + + partition@3 { + label = "SPL.backup3"; + reg = <0xc0000 0x40000>; + }; + + partition@4 { + label = "u-boot"; + reg = <0x100000 0x100000>; + }; + + partition@5 { + label = "u-boot.backup1"; + reg = <0x200000 0x100000>; + }; + + partition@6 { + label = "u-boot-env"; + reg = <0x300000 0x40000>; + }; + + partition@7 { + label = "u-boot-env.backup1"; + reg = <0x340000 0x40000>; + }; + + partition@8 { + label = "UBI"; + reg = <0x380000 0x1fc80000>; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; + + tps: tps@24 { + reg = <0x24>; + }; +}; + +&lcdc { + blue-and-red-wiring = "crossed"; + status = "okay"; +}; + +&mmc1 { + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vmmcsd_fixed>; + status = "okay"; +}; + +&rtc { + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; + clock-names = "ext-clk", "int-clk"; + system-power-controller; +}; + +&spi0 { + ti,pindir-d0-out-d1-in; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; +}; + +#include "tps65217.dtsi" + +&tps { + ti,pmic-shutdown-controller; + interrupt-parent = <&intc>; + interrupts = <7>; /* NMI */ + + backlight { + isel = <1>; /* 1 - ISET1, 2 ISET2 */ + fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ + default-brightness = <100>; + }; + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1351500>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&tscadc { + status = "okay"; + + adc { + ti,adc-channels = <0 1 2 3 4 5 6>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin &gpio_pins>; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; + + dmtimer7_pins: pinmux_dmtimer7_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) + >; + }; + + gpio_keys_pins: pinmux_gpio_keys_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) + >; + }; + + gpio_pins: pinmux_gpio_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7) + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + lcd_disen_pins: pinmux_lcd_disen_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7) + >; + }; + + lcd_pins_default: pinmux_lcd_pins_default { + pinctrl-single,pins = < + AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + >; + }; + + lcd_pins_sleep: pinmux_lcd_pins_sleep { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) + >; + }; + + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + >; + }; + + nandflash_pins: pinmux_nandflash_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) + >; + }; +}; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index f2005ecca74f..18f70b35da4c 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* @@ -157,111 +154,111 @@ &am33xx_pinmux { user_leds: user_leds { pinctrl-single,pins = < - AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */ - AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */ - AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */ - AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */ - AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */ - AM33XX_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */ >; }; mmc0_pins_default: mmc0_pins_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c0_pins_default: i2c0_pins_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ - AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) >; }; spi0_pins_default: spi0_pins_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* (C15) spi0_cs1.spi0_cs1 */ - AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */ >; }; uart3_pins_default: uart3_pins_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ - AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLUP, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1, RMII mode */ - AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_crs.rmii1_crs_dv */ - AM33XX_IOPAD(0x944, (PIN_INPUT_PULLUP | MUX_MODE0)) /* rmii1_refclk.rmii1_refclk */ - AM33XX_IOPAD(0x940, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x910, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxerr.rmii1_rxerr */ - AM33XX_IOPAD(0x928, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x924, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x914, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txen.rmii1_txen */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txen.rmii1_txen */ /* Slave 2, RMII mode */ - AM33XX_IOPAD(0x870, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_wait0.rmii2_crs_dv */ - AM33XX_IOPAD(0x908, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_col.rmii2_refclk */ - AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_a11.rmii2_rxd0 */ - AM33XX_IOPAD(0x868, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_a10.rmii2_rxd1 */ - AM33XX_IOPAD(0x874, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_wpn.rmii2_rxerr */ - AM33XX_IOPAD(0x854, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a5.rmii2_txd0 */ - AM33XX_IOPAD(0x850, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a4.rmii2_txd1 */ - AM33XX_IOPAD(0x840, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a0.rmii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_wait0.rmii2_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_col.rmii2_refclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a11.rmii2_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a10.rmii2_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_wpn.rmii2_rxerr */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a5.rmii2_txd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a4.rmii2_txd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a0.rmii2_txen */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x944, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x940, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x910, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x928, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x924, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x914, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* Slave 2 reset value */ - AM33XX_IOPAD(0x870, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x908, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x868, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x874, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x854, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x850, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x840, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, (PIN_OUTPUT_PULLUP | MUX_MODE0)) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x94c, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; }; @@ -484,10 +481,6 @@ dual_emac; }; -&phy_sel { - rmii-clock-ext; -}; - &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 55b4c94cfafb..eabcc8b2e4ea 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x * * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -57,41 +54,41 @@ &am33xx_pinmux { i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; nandflash_pins: pinmux_nandflash_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */ >; }; }; @@ -123,10 +120,6 @@ phy-mode = "rmii"; }; -&phy_sel { - rmii-clock-ext; -}; - &elm { status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index 481edcfaf121..a8005e975ea2 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -46,109 +43,109 @@ &am33xx_pinmux { mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_int */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_rxer */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* rmii1_txen */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* rmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* rmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_rd0 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) /* Slave 2 */ - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */ - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */ - AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_int */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */ - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_int */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_rxer */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_txen */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_rd0 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_refclk */ /* Slave 2 reset value*/ - AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */ - AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */ - AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_rxer */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_int */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_refclk */ >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; }; @@ -328,10 +325,6 @@ dual_emac_res_vlan = <3>; }; -&phy_sel { - rmii-clock-ext; -}; - &mac { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index 14f781953475..671d4a5da9c4 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -33,54 +33,54 @@ i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; push_button_pins: pinmux_push_button { pinctrl-single,pins = < - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2_23 */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_23 */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; mmc1_pins_default: pinmux_mmc1_pins { pinctrl-single,pins = < /* eMMC */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ >; }; spi0_pins: pinmux_spi0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) >; }; }; @@ -159,11 +159,6 @@ status = "okay"; }; -&phy_sel { - reg= <0x44e10650 0xf5>; - rmii-clock-ext; -}; - &sham { status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts index 48aee6de4cdb..5923b6e7e1cb 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts +++ b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts @@ -31,23 +31,23 @@ cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txen.rmii1_txen */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) >; }; spi1_pins: pinmux_spi1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE4) /* uart1_ctsn.spi1_cs0 */ - AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_ctsn.spi1_d0 */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_rtsn.spi1_d1 */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart1_ctsn.spi1_cs0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart0_ctsn.spi1_d0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart0_rtsn.spi1_d1 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts index 5a58efc0c874..783d411f2cef 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2017 MOXA Inc. - https://www.moxa.com/ * * Author: SZ Lin (林上智) <sz.lin@moxa.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -104,79 +101,79 @@ minipcie_pins: pinmux_minipcie { pinctrl-single,pins = < - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2_24 */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */ - AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/ >; }; push_button_pins: pinmux_push_button { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE3) /* uart0_ctsn.i2c1_sda */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart0_rtsn.i2c1_scl */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0) >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE6) /* lcd_data14.uart5_ctsn */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data15.uart5_rtsn */ - AM33XX_IOPAD(0x8c4, PIN_INPUT_PULLUP | MUX_MODE4) /* lcd_data9.uart5_rxd */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE4) /* lcd_data8.uart5_txd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* lcd_data9.uart5_rxd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4) /* lcd_data8.uart5_txd */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) /* Slave 2 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */ - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */ - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */ - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */ >; }; @@ -184,46 +181,46 @@ davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; mmc0_pins_default: pinmux_mmc0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ - AM33XX_IOPAD(0x990, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */ - AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */ >; }; mmc2_pins_default: pinmux_mmc2_pins { pinctrl-single,pins = < /* eMMC */ - AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ - AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */ - AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */ - AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */ - AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */ - AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ - AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */ >; }; spi0_pins: pinmux_spi0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) >; }; @@ -446,11 +443,6 @@ dual_emac_res_vlan = <2>; }; -&phy_sel { - reg= <0x44e10650 0xf5>; - rmii-clock-ext; -}; - &sham { status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 9c9143ed4003..0946fbf1b1fb 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -41,121 +38,121 @@ misc_pins: misc_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7) /* spi0_cs0.gpio0_5 */ >; }; gpmc_pins: gpmc_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */ - AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */ - AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */ - AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */ - AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */ - - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */ - AM33XX_IOPAD(0x884, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */ - AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */ - - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */ - - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */ - - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE0) + + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE0) + + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) + + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE1) /* lcd_data1.gpmc_a1 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE1) /* lcd_data2.gpmc_a2 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE1) /* lcd_data3.gpmc_a3 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE1) /* lcd_data4.gpmc_a4 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE1) /* lcd_data5.gpmc_a5 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE1) /* lcd_data6.gpmc_a6 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE1) /* lcd_data7.gpmc_a7 */ + + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE1) /* lcd_vsync.gpmc_a8 */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE1) /* lcd_hsync.gpmc_a9 */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE1) /* lcd_pclk.gpmc_a10 */ >; }; i2c0_pins: i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE0) >; }; uart0_pins: uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0) >; }; uart1_pins: uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */ - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0) >; }; uart2_pins: uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8c0, PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */ - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_INPUT_PULLUP, MUX_MODE7) /* lcd_data8.gpio2[14] */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7) /* lcd_data9.gpio2[15] */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd */ >; }; uart3_pins: uart3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8c8, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */ - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */ - AM33XX_IOPAD(0x964, PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE6) /* lcd_data10.uart3_ctsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE6) /* lcd_data11.uart3_rtsn */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE1) /* spi0_cs1.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT, MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ >; }; uart4_pins: uart4_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8d0, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */ - AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */ - AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE6) /* lcd_data12.uart4_ctsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE6) /* lcd_data13.uart4_rtsn */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE1) /* uart0_ctsn.uart4_rxd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE1) /* uart0_rtsn.uart4_txd */ >; }; uart5_pins: uart5_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */ - AM33XX_IOPAD(0x944, PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE4) /* lcd_data14.uart5_rxd */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT, MUX_MODE3) /* rmiii1_refclk.uart5_txd */ >; }; mmc1_pins: mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ - AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7) /* emu1.gpio3[8] */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index 95d54cf3849e..f47cc9fea253 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -40,61 +40,61 @@ &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) >; }; mcasp0_pins: mcasp0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ - AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */ >; }; flash_enable: flash-enable { pinctrl-single,pins = < - AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */ >; }; imu_interrupt: imu-interrupt { pinctrl-single,pins = < - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_rx_er.gpio3_2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_rx_er.gpio3_2 */ >; }; ethernet_interrupt: ethernet-interrupt{ pinctrl-single,pins = < - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 */ >; }; }; @@ -269,109 +269,109 @@ user_leds_s0: user-leds-s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio1_24 */ >; }; i2c2_pins: pinmux-i2c2-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */ >; }; uart0_pins: pinmux-uart0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; clkout2_pin: pinmux-clkout2-pin { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; cpsw_default: cpsw-default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_txd3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_txd2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_txclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rxclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) >; }; cpsw_sleep: cpsw-sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci-mdio-default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci-mdio-sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc1_pins: pinmux-mmc1-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) >; }; emmc_pins: pinmux-emmc-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi index f8ff473f94f0..a8b6842489f7 100644 --- a/arch/arm/boot/dts/am335x-osd335x-common.dtsi +++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi @@ -36,8 +36,8 @@ &am33xx_pinmux { i2c0_pins: pinmux-i2c0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; }; diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 1ec8e0d80191..d774bf76720c 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014-2017 Phytec Messtechnik GmbH * Author: Wadim Egorov <w.egorov@phytec.de> * Teresa Remmet <t.remmet@phytec.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/input/input.h> @@ -79,15 +76,15 @@ &am33xx_pinmux { user_buttons_pins: pinmux_user_buttons { pinctrl-single,pins = < - AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* emu0.gpio3_7 */ - AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* emu1.gpio3_8 */ + AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */ + AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */ >; }; user_leds_pins: pinmux_user_leds { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */ - AM33XX_IOPAD(0x884, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */ >; }; }; @@ -96,8 +93,8 @@ &am33xx_pinmux { dcan1_pins: pinmux_dcan1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ - AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ >; }; }; @@ -112,18 +109,18 @@ &am33xx_pinmux { ethernet1_pins: pinmux_ethernet1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ - AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ >; }; }; @@ -171,8 +168,8 @@ cb_gpio_pins: pinmux_cb_gpio { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart0_ctsn.gpio1_8 */ - AM33XX_IOPAD(0x96c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */ >; }; }; @@ -181,13 +178,13 @@ &am33xx_pinmux { mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ >; }; }; @@ -197,7 +194,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -205,31 +202,31 @@ &am33xx_pinmux { uart0_pins: pinmux_uart0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart2_pins: pinmux_uart2 { pinctrl-single,pins = < - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ - AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_rx_clk.uart2_txd */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ >; }; uart3_pins: pinmux_uart3 { pinctrl-single,pins = < - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd3.uart3_rxd */ - AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd2.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts index ae43d61f4e8b..3141255f72c2 100644 --- a/arch/arm/boot/dts/am335x-pdu001.dts +++ b/arch/arm/boot/dts/am335x-pdu001.dts @@ -92,162 +92,162 @@ i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d1.i2c1_sda */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_cs0.i2c1_scl */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_clk.i2c2_sda */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d0.i2c2_scl */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_clk.i2c2_sda */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d0.i2c2_scl */ >; }; spi1_pins: pinmux_spi1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */ - AM33XX_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ - AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */ - AM33XX_IOPAD(0x99C, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT, MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT, MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* mcasp0_axr0.spi1_d1 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT, MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x96C, PIN_OUTPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE1) /* spi0_cs1.uart3_rxd */ - AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE1) /* spi0_cs1.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ >; }; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Port 1 (emac0) */ - AM33XX_IOPAD(0x908, PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ - AM33XX_IOPAD(0x90C, PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ - AM33XX_IOPAD(0x910, PIN_INPUT | MUX_MODE0) /* mii1_rxer.mii1_rxer */ - AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE0) /* mii1_txen.mii1_txen */ - AM33XX_IOPAD(0x918, PIN_INPUT | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - AM33XX_IOPAD(0x92c, PIN_INPUT | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - AM33XX_IOPAD(0x930, PIN_INPUT | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - AM33XX_IOPAD(0x934, PIN_INPUT | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT, MUX_MODE0) /* Port 2 (emac1) */ - AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* mii2_txen.gpmc_a0 */ - AM33XX_IOPAD(0x844, PIN_INPUT | MUX_MODE1) /* mii2_rxdv.gpmc_a1 */ - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* mii2_txd3.gpmc_a2 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* mii2_txd2.gpmc_a3 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* mii2_txd1.gpmc_a4 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* mii2_txd0.gpmc_a5 */ - AM33XX_IOPAD(0x858, PIN_INPUT | MUX_MODE1) /* mii2_txclk.gpmc_a6 */ - AM33XX_IOPAD(0x85c, PIN_INPUT | MUX_MODE1) /* mii2_rxclk.gpmc_a7 */ - AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE1) /* mii2_rxd3.gpmc_a8 */ - AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE1) /* mii2_rxd2.gpmc_a9 */ - AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE1) /* mii2_rxd1.gpmc_a10 */ - AM33XX_IOPAD(0x86C, PIN_INPUT | MUX_MODE1) /* mii2_rxd0.gpmc_a11 */ - AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE1) /* mii2_crs.gpmc_wait0 */ - AM33XX_IOPAD(0x874, PIN_INPUT | MUX_MODE1) /* mii2_rxer.gpmc_wpn */ - AM33XX_IOPAD(0x878, PIN_INPUT | MUX_MODE1) /* mii2_col.gpmc_ben1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* mii2_txen.gpmc_a0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT, MUX_MODE1) /* mii2_rxdv.gpmc_a1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* mii2_txd3.gpmc_a2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* mii2_txd2.gpmc_a3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* mii2_txd1.gpmc_a4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* mii2_txd0.gpmc_a5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT, MUX_MODE1) /* mii2_txclk.gpmc_a6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT, MUX_MODE1) /* mii2_rxclk.gpmc_a7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE1) /* mii2_rxd3.gpmc_a8 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE1) /* mii2_rxd2.gpmc_a9 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE1) /* mii2_rxd1.gpmc_a10 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE1) /* mii2_rxd0.gpmc_a11 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT, MUX_MODE1) /* mii2_crs.gpmc_wait0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT, MUX_MODE1) /* mii2_rxer.gpmc_wpn */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT, MUX_MODE1) /* mii2_col.gpmc_ben1 */ >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; mmc1_pins: pinmux_mmc1_pins { /* eMMC */ pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) >; }; mmc2_pins: pinmux_mmc2_pins { /* SD cardcage */ pinctrl-single,pins = < - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ /* card change signal for frontpanel SD cardcage */ - AM33XX_IOPAD(0x890, PIN_INPUT | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT, MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ >; }; lcd_pins_s0: lcd_pins_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) >; }; dcan0_pins: pinmux_dcan0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart1_ctsn.d_can0_tx */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart1_rtsn.d_can0_rx */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 6be79b8349ac..e7764ecdf65f 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -93,14 +90,14 @@ &am33xx_pinmux { i2c0_pins: pinmux_i2c0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c1_pins: pinmux_i2c1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x90C, PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE3) /* mii1_crs,i2c1_sda */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE3) /* mii1_rxerr,i2c1_scl */ >; }; }; @@ -130,7 +127,7 @@ &am33xx_pinmux { accel_pins: pinmux_accel { pinctrl-single,pins = < - AM33XX_IOPAD(0x898, PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT, MUX_MODE7) /* gpmc_wen.gpio2_4 */ >; }; }; @@ -177,12 +174,12 @@ &am33xx_pinmux { audio_pins: pinmux_audio { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */ - AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7) /* gpmc_a0.gpio1_16 */ >; }; }; @@ -228,36 +225,36 @@ &am33xx_pinmux { lcd_pins: pinmux_lcd { pinctrl-single,pins = < - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */ - AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */ - AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */ - AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */ - AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */ - AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data16 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data18 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data19 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data23 */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) /* Display Enable */ - AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a11.gpio1_27 */ >; }; }; @@ -299,29 +296,29 @@ &am33xx_pinmux { ethernet_pins: pinmux_ethernet { pinctrl-single,pins = < - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE2) /* ethernet interrupt */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE7) /* rmii2_refclk.gpio0_29 */ /* ethernet PHY nReset */ - AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLUP, MUX_MODE7) /* mii1_col.gpio3_0 */ >; }; mdio_pins: pinmux_mdio { pinctrl-single,pins = < - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; }; @@ -364,45 +361,45 @@ &am33xx_pinmux { sd_pins: pinmux_sd_card { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; emmc_pins: pinmux_emmc { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ /* EMMC nReset */ - AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ >; }; wireless_pins: pinmux_wireless { pinctrl-single,pins = < - AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ - AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ - AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ - AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */ - AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ - AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc1_clk */ /* WLAN nReset */ - AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio1_24 */ /* WLAN nPower down */ - AM33XX_IOPAD(0x870, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_wait0.gpio0_30 */ /* 32kHz Clock */ - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; }; @@ -498,10 +495,10 @@ &am33xx_pinmux { spi0_pins: pinmux_spi0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) >; }; }; @@ -539,16 +536,16 @@ &am33xx_pinmux { uart0_pins: pinmux_uart0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; }; @@ -591,9 +588,9 @@ usb_pins: pinmux_usb { pinctrl-single,pins = < /* USB0 Over-Current (active low) */ - AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7) /* gpmc_a9.gpio1_25 */ /* USB1 Over-Current (active low) */ - AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) /* gpmc_a10.gpio1_26 */ >; }; }; @@ -649,16 +646,16 @@ &am33xx_pinmux { user_leds_pins: pinmux_user_leds { pinctrl-single,pins = < - AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE7) /* gpmc_a4.gpio1_20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* gpmc_a5.gpio1_21 */ >; }; user_buttons_pins: pinmux_user_buttons { pinctrl-single,pins = < - AM33XX_IOPAD(0x858, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - AM33XX_IOPAD(0x85C, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */ - AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a7.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio0_7 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-phycore-rdk.dts b/arch/arm/boot/dts/am335x-phycore-rdk.dts index 305f0b35d6ea..672daf9d36be 100644 --- a/arch/arm/boot/dts/am335x-phycore-rdk.dts +++ b/arch/arm/boot/dts/am335x-phycore-rdk.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 PHYTEC Messtechnik GmbH * Author: Wadim Egorov <w.egorov@phytec.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 428a25e952b0..ee6b1cb27ce5 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Phytec Messtechnik GmbH * Author: Teresa Remmet <t.remmet@phytec.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "am33xx.dtsi" @@ -57,22 +54,22 @@ &am33xx_pinmux { ethernet0_pins: pinmux_ethernet0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) >; }; mdio_pins: pinmux_mdio { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; }; @@ -100,16 +97,12 @@ status = "okay"; }; -&phy_sel { - rmii-clock-ext; -}; - /* I2C Busses */ &am33xx_pinmux { i2c0_pins: pinmux_i2c0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) >; }; }; @@ -148,20 +141,20 @@ &am33xx_pinmux { nandflash_pins: pinmux_nandflash { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) >; }; }; @@ -300,10 +293,10 @@ &am33xx_pinmux { spi0_pins: pinmux_spi0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) >; }; }; diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index 62fe5cab9fae..ff4f919d22f6 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -62,74 +62,74 @@ &am33xx_pinmux { i2c2_pins: pinmux-i2c2-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ >; }; ehrpwm0_pins: pinmux-ehrpwm0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */ >; }; ehrpwm1_pins: pinmux-ehrpwm1-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */ >; }; mmc0_pins: pinmux-mmc0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */ >; }; spi0_pins: pinmux-spi0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) >; }; spi1_pins: pinmux-spi1-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */ - AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */ - AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */ >; }; usr_leds_pins: pinmux-usr-leds-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ - AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ - AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ >; }; uart0_pins: pinmux-uart0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart4_pins: pinmux-uart4-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ - AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts index 35527fdf56cc..8678e6e35493 100644 --- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -23,70 +20,70 @@ cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; usb_hub_ctrl: usb_hub_ctrl { pinctrl-single,pins = < - AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLUP | MUX_MODE7) /* rmii1_refclk.gpio0_29 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* rmii1_refclk.gpio0_29 */ >; }; mpu6050_pins: pinmux_mpu6050_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE7) /* uart0_ctsn.gpio1_8 */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7) /* uart0_ctsn.gpio1_8 */ >; }; lps3331ap_pins: pinmux_lps3331ap_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) /* gpmc_a10.gpio1_26 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts index 917d7ccc9109..a3f6bc4072d9 100644 --- a/arch/arm/boot/dts/am335x-sbc-t335.dts +++ b/arch/arm/boot/dts/am335x-sbc-t335.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335 * * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "am335x-cm-t335.dts" @@ -70,122 +67,82 @@ lcd_pins_default: lcd_pins_default { pinctrl-single,pins = < /* gpmc_ad8.lcd_data23 */ - AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data22 */ - AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data21 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data20 */ - AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data19 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data18 */ - AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data17 */ - AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data16 */ - AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) - /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) - /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) - /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) - /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) - /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) - /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) - /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) - /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) - /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) - /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) - /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) - /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) - /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) - /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) - /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) - /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) - /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) - /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) - /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) - /* lcd_ac_bias_en.lcd_ac_bias_en */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) >; }; lcd_pins_sleep: lcd_pins_sleep { pinctrl-single,pins = < /* gpmc_ad8.lcd_data23 */ - AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad9.lcd_data22 */ - AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad10.lcd_data21 */ - AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad11.lcd_data20 */ - AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.lcd_data19 */ - AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.lcd_data18 */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.lcd_data17 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.lcd_data16 */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) - /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7) - /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7) - /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7) - /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7) - /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7) - /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7) - /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7) - /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7) - /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7) - /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7) - /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7) - /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7) - /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7) - /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7) - /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7) - /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7) - /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) - /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) - /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) - /* lcd_ac_bias_en.lcd_ac_bias_en */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; }; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 5b250060f6dd..5b0368504015 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -1,11 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * support for the bosch am335x based shc c3 board * * Copyright, C) 2015 Heiko Schocher <hs@denx.de> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -384,193 +382,191 @@ clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < /* xdma_event_intr1.clkout2 */ - AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6) + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT, MUX_MODE6) >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE0) >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < - /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) - /* mdio_clk.mdio_clk */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; ehrpwm1_pins: pinmux_ehrpwm1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.gpio1_19 */ >; }; emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2) - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE5) >; }; mmc3_pins: pinmux_mmc3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3) - AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3) - AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3) - AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3) - AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3) - AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT, MUX_MODE3) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0) - AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0) >; }; uart1_pins: pinmux_uart1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0) - AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0) >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) >; }; uart4_pins: pinmux_uart4_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) - AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE6) >; }; user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7) - AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7) - AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7) - AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7) - AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7) - AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7) - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7) - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7) - AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLUP, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLUP, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7) >; }; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 38d57b89f7d3..2f82095e7210 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -218,227 +215,227 @@ audio_pins: pinmux_audio_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) >; }; audio_pa_pins: pinmux_audio_pa_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* SoundPA_en - mcasp0_aclkr.gpio3_18 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE7) /* SoundPA_en - mcasp0_aclkr.gpio3_18 */ >; }; audio_mclk_pins: pinmux_audio_mclk_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.gpio1_27 */ >; }; backlight0_pins: pinmux_backlight0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7) /* gpmc_wen.gpio2_4 */ >; }; backlight1_pins: pinmux_backlight1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* gpmc_ad10.gpio0_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad10.gpio0_26 */ >; }; lcd_pins: pinmux_lcd_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; led_pins: pinmux_led_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* gpmc_a8.gpio1_24 */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart4_pins: pinmux_uart4_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ - AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* gpmc_wait0.uart4_rxd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* gpmc_wpn.uart4_txd */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0) >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) /* Ethernet */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* Ethernet_nRST - gpmc_ad14.gpio1_14 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7) /* Ethernet_nRST - gpmc_ad14.gpio1_14 */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE7) /* uart0_rtsn.gpio1_9 */ >; }; emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a4.gpio1_20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a4.gpio1_20 */ >; }; emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ >; }; ehrpwm1_pins: pinmux_ehrpwm1a_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.ehrpwm1b */ >; }; rtc0_irq_pins: pinmux_rtc0_irq_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad9.gpio0_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_ad9.gpio0_23 */ >; }; spi0_pins: pinmux_spi0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MOSI - spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MISO - spi0_d1.spi0_d1 */ - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CLK - spi0_clk.spi0_clk */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS0 (NBATTSS) - spi0_cs0.spi0_cs0 */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS1 (FPGA_FLASH_NCS) - spi0_cs1.spi0_cs1 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_MOSI */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_MISO */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_CS0 (NBATTSS) */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_CS1 (FPGA_FLASH_NCS) */ >; }; lwb_pins: pinmux_lwb_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */ /* PDI Bus - Battery system */ - AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */ /* FPGA */ - AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */ - AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/am335x-wega-rdk.dts index 6431b7db8109..2e04f6df8257 100644 --- a/arch/arm/boot/dts/am335x-wega-rdk.dts +++ b/arch/arm/boot/dts/am335x-wega-rdk.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Phytec Messtechnik GmbH * Author: Teresa Remmet <t.remmet@phytec.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 8ce541739b24..67bde56f89fd 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Phytec Messtechnik GmbH * Author: Teresa Remmet <t.remmet@phytec.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { @@ -32,11 +29,11 @@ &am33xx_pinmux { mcasp0_pins: pinmux_mcasp0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; }; @@ -84,8 +81,8 @@ &am33xx_pinmux { dcan1_pins: pinmux_dcan1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ >; }; }; @@ -100,20 +97,20 @@ &am33xx_pinmux { ethernet1_pins: pinmux_ethernet1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* gpmc_a0.mii2_txen */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a1.mii2_rxdv */ - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* gpmc_a2.mii2_txd3 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* gpmc_a3.mii2_txd2 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* gpmc_a4.mii2_txd1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* gpmc_a5.mii2_txd0 */ - AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a6.mii2_txclk */ - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a7.mii2_rxclk */ - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ - AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_ben1.mii2_col */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* gpmc_a2.mii2_txd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* gpmc_a3.mii2_txd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* gpmc_a4.mii2_txd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* gpmc_a5.mii2_txd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a6.mii2_txclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a7.mii2_rxclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_ben1.mii2_col */ >; }; }; @@ -141,13 +138,13 @@ &am33xx_pinmux { mmc1_pins: pinmux_mmc1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ >; }; }; @@ -157,7 +154,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -171,17 +168,17 @@ &am33xx_pinmux { uart0_pins: pinmux_uart0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; }; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 922182439048..dced92a8970e 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for AM33xx clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &scm_clocks { sys_clkin_ck: sys_clkin_ck@40 { diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 7b818d9d2eab..ced1a19d5f89 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -279,17 +279,9 @@ #pinctrl-cells = <1>; ranges = <0 0 0x2000>; - phy_sel: cpsw-phy-sel@650 { - compatible = "ti,am3352-cpsw-phy-sel"; - reg= <0x650 0x4>; - reg-names = "gmii-sel"; - }; - am33xx_pinmux: pinmux@800 { compatible = "pinctrl-single"; reg = <0x800 0x238>; - #address-cells = <1>; - #size-cells = <0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7f>; @@ -302,6 +294,12 @@ #size-cells = <1>; ranges = <0 0 0x800>; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,am3352-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <2>; + }; + scm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; @@ -717,7 +715,6 @@ interrupts = <40 41 42 43>; ranges = <0 0 0x8000>; syscon = <&scm_conf>; - cpsw-phy-sel = <&phy_sel>; status = "disabled"; davinci_mdio: mdio@1000 { @@ -733,11 +730,13 @@ cpsw_emac0: slave@200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 1>; }; cpsw_emac1: slave@300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 1>; }; }; }; @@ -1760,11 +1759,10 @@ target-module@cc000 { /* 0x481cc000, ap 60 46.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "d_can0"; - reg = <0xcc000 0x4>; - reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ - clocks = <&l4ls_clkctrl AM3_D_CAN0_CLKCTRL 0>; - clock-names = "fck"; + clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>, + <&dcan0_fck>; + clock-names = "fck", "osc"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xcc000 0x2000>; @@ -1783,11 +1781,10 @@ target-module@d0000 { /* 0x481d0000, ap 62 42.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "d_can1"; - reg = <0xd0000 0x4>; - reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ - clocks = <&l4ls_clkctrl AM3_D_CAN1_CLKCTRL 0>; - clock-names = "fck"; + clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>, + <&dcan1_fck>; + clock-names = "fck", "osc"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xd0000 0x2000>; diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts index 083ff5073435..eb3517dabee1 100644 --- a/arch/arm/boot/dts/am3517-craneboard.dts +++ b/arch/arm/boot/dts/am3517-craneboard.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * See craneboard.org for more details * * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi index e841918c1c26..48631a45da51 100644 --- a/arch/arm/boot/dts/am3517-evm-ui.dtsi +++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 3527c0f2dfff..ebfe28c2f544 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index b1c988eed87c..8b669e2eafec 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 Derald D. Woods <woods.technical@gmail.com> * * Based on am3517-evm.dts - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts index 3395783c5b4e..e507e4ae0d88 100644 --- a/arch/arm/boot/dts/am3517_mt_ventoux.dts +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Ilya Yanok, EmCraft Systems - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi index 00dd1f091be5..220d0a52797e 100644 --- a/arch/arm/boot/dts/am35xx-clocks.dtsi +++ b/arch/arm/boot/dts/am35xx-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP3 clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &scm_clocks { emac_ick: emac_ick@32c { diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts new file mode 100644 index 000000000000..883fb85135d4 --- /dev/null +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for Winterland IceBoard + * + * http://mcgillcosmology.com + * http://threespeedlogic.com + * + * This is an ARM + FPGA instrumentation board used at telescopes in + * Antarctica (the South Pole Telescope), Chile (POLARBEAR), and at the DRAO + * observatory in British Columbia (CHIME). + * + * Copyright (c) 2019 Three-Speed Logic, Inc. <gsmecher@threespeedlogic.com> + */ + +/dts-v1/; + +#include "dm814x.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Winterland IceBoard"; + compatible = "ti,dm8148", "ti,dm814"; + + chosen { + stdout-path = "serial1:115200n8"; + bootargs = "earlycon"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + vmmcsd_fixed: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +/* The MAC provides internal delay for the transmit path ONLY, which is enabled + * provided no -id/-txid/-rxid suffix is provided to "phy-mode". + * + * The receive path is delayed at the PHY. The recommended register settings + * are 0xf0 for the control bits, and 0x7777 for the data bits. However, the + * conversion code in the kernel lies: the PHY's registers are 120 ps per tap, + * and the kernel assumes 200 ps per tap. So we have fudged the numbers here to + * obtain the correct register settings. + */ +&mac { dual_emac = <1>; }; +&cpsw_emac0 { + phy-handle = <ðphy0>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; +&cpsw_emac1 { + phy-handle = <ðphy1>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0x2>; + + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + + rxd3-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd0-skew-ps = <0>; + + phy-reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + }; + + ethphy1: ethernet-phy@1 { + reg = <0x1>; + + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + + rxd3-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd0-skew-ps = <0>; + + phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc1 { status = "disabled"; }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; +}; +&mmc3 { status = "disabled"; }; + +&i2c1 { + /* Most I2C activity happens through this port, with the sole exception + * of the backplane. Since there are multiply assigned addresses, the + * "i2c-mux-idle-disconnect" is important. + */ + + pca9548@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + /* FMC A */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + i2c-mux-idle-disconnect; + }; + + i2c@1 { + /* FMC B */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + i2c-mux-idle-disconnect; + }; + + i2c@2 { + /* QSFP A */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + i2c-mux-idle-disconnect; + }; + + i2c@3 { + /* QSFP B */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + i2c-mux-idle-disconnect; + }; + + i2c@4 { + /* SFP */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + i2c-mux-idle-disconnect; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + i2c-mux-idle-disconnect; + + ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; }; + ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; }; + ina230@42 { compatible = "ti,ina230"; reg = <0x42>; shunt-resistor = <5000>; }; + + ina230@44 { compatible = "ti,ina230"; reg = <0x44>; shunt-resistor = <5000>; }; + ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <5000>; }; + ina230@46 { compatible = "ti,ina230"; reg = <0x46>; shunt-resistor = <5000>; }; + + ina230@47 { compatible = "ti,ina230"; reg = <0x47>; shunt-resistor = <5500>; }; + ina230@48 { compatible = "ti,ina230"; reg = <0x48>; shunt-resistor = <2360>; }; + ina230@49 { compatible = "ti,ina230"; reg = <0x49>; shunt-resistor = <2360>; }; + ina230@43 { compatible = "ti,ina230"; reg = <0x43>; shunt-resistor = <2360>; }; + ina230@4b { compatible = "ti,ina230"; reg = <0x4b>; shunt-resistor = <5500>; }; + ina230@4c { compatible = "ti,ina230"; reg = <0x4c>; shunt-resistor = <2360>; }; + ina230@4d { compatible = "ti,ina230"; reg = <0x4d>; shunt-resistor = <770>; }; + ina230@4e { compatible = "ti,ina230"; reg = <0x4e>; shunt-resistor = <770>; }; + ina230@4f { compatible = "ti,ina230"; reg = <0x4f>; shunt-resistor = <770>; }; + }; + + i2c@6 { + /* Backplane */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + i2c-mux-idle-disconnect; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + i2c-mux-idle-disconnect; + + u41: pca9575@20 { + compatible = "nxp,pca9575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "FMCA_EN_12V0", "FMCA_EN_3V3", "FMCA_EN_VADJ", "FMCA_PG_M2C", + "FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS", + "FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C", + "FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL"; + reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + + u42: pca9575@21 { + compatible = "nxp,pca9575"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "QSFPA_ModPrsL", "QSFPA_IntL", "QSFPA_ResetL", "QSFPA_ModSelL", + "QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL", + "SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1", + "QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR"; + reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + + u48: pca9575@22 { + compatible = "nxp,pca9575"; + reg=<0x22>; + gpio-controller; + #gpio-cells = <2>; + + sw-gpios = <&u48 0 0>, <&u48 1 0>, <&u48 2 0>, <&u48 3 0>, + <&u48 4 0>, <&u48 5 0>, <&u48 6 0>, <&u48 7 0>; + led-gpios = <&u48 7 0>, <&u48 6 0>, <&u48 5 0>, <&u48 4 0>, + <&u48 3 0>, <&u48 2 0>, <&u48 1 0>, <&u48 0 0>; + + gpio-line-names = + "GP_SW1", "GP_SW2", "GP_SW3", "GP_SW4", + "GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8", + "GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5", + "GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1"; + reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + + u59: pca9575@23 { + compatible = "nxp,pca9575"; + reg=<0x23>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GP_LED9", "GP_LED10", "GP_LED11", "GP_LED12", + "GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault", + "BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3", + "BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17"; + reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + + tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; }; + tmp100@4a { compatible = "ti,tmp100"; reg = <0x4a>; }; + tmp100@4b { compatible = "ti,tmp100"; reg = <0x4b>; }; + tmp100@4c { compatible = "ti,tmp100"; reg = <0x4c>; }; + + /* EEPROM bank and serial number are treated as separate devices */ + at24c01@57 { compatible = "atmel,24c01"; reg = <0x57>; }; + at24cs01@5f { compatible = "atmel,24cs01"; reg = <0x5f>; }; + }; + }; +}; + +&i2c2 { + pca9548@71 { + compatible = "nxp,pca9548"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@6 { + /* Backplane */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + multi-master; + + /* All backplanes should have this -- it's how we know they're there. */ + at24c08@54 { compatible="atmel,24c08"; reg=<0x54>; }; + at24cs08@5c { compatible="atmel,24cs08"; reg=<0x5c>; }; + + /* 16 slot backplane */ + tmp421@4d { compatible="ti,tmp421"; reg=<0x4d>; }; + tmp421@4e { compatible="ti,tmp421"; reg=<0x4e>; }; + ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <2360>; }; + amc6821@18 { compatible = "ti,amc6821"; reg = <0x18>; }; + + /* Single slot backplane */ + }; + }; +}; + +&pincntl { + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */ + DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */ + DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */ + DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */ + DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */ + DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */ + DM814X_IOPAD(0x0924, PIN_INPUT_PULLUP | 0x40) /* SD1_POW */ + DM814X_IOPAD(0x0928, PIN_INPUT | 0x40) /* SD1_SDWP */ + DM814X_IOPAD(0x093C, PIN_INPUT | 0x2) /* SD1_SDCD */ + >; + }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */ + >; + }; + + gpio1_pins: pinmux_gpio1_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x081c, PIN_OUTPUT | 0x80) /* PROGRAM_B */ + DM814X_IOPAD(0x0820, PIN_INPUT | 0x80) /* INIT_B */ + DM814X_IOPAD(0x0824, PIN_INPUT | 0x80) /* DONE */ + + DM814X_IOPAD(0x0838, PIN_INPUT_PULLUP | 0x80) /* FMCA_TMS */ + DM814X_IOPAD(0x083c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TCK */ + DM814X_IOPAD(0x0898, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDO */ + DM814X_IOPAD(0x089c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDI */ + DM814X_IOPAD(0x08ac, PIN_INPUT_PULLUP | 0x80) /* FMCA_TRST */ + + DM814X_IOPAD(0x08b0, PIN_INPUT_PULLUP | 0x80) /* FMCB_TMS */ + DM814X_IOPAD(0x0a88, PIN_INPUT_PULLUP | 0x80) /* FMCB_TCK */ + DM814X_IOPAD(0x0a8c, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDO */ + DM814X_IOPAD(0x08bc, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDI */ + DM814X_IOPAD(0x0a94, PIN_INPUT_PULLUP | 0x80) /* FMCB_TRST */ + + DM814X_IOPAD(0x08d4, PIN_INPUT_PULLUP | 0x80) /* FPGA_TMS */ + DM814X_IOPAD(0x0aa8, PIN_INPUT_PULLUP | 0x80) /* FPGA_TCK */ + DM814X_IOPAD(0x0adc, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDO */ + DM814X_IOPAD(0x0ab0, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDI */ + >; + }; + + gpio2_pins: pinmux_gpio2_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x090c, PIN_INPUT_PULLUP | 0x80) /* PHY A IRQ */ + DM814X_IOPAD(0x0910, PIN_INPUT_PULLUP | 0x80) /* PHY A RESET */ + DM814X_IOPAD(0x08f4, PIN_INPUT_PULLUP | 0x80) /* PHY B IRQ */ + DM814X_IOPAD(0x08f8, PIN_INPUT_PULLUP | 0x80) /* PHY B RESET */ + + //DM814X_IOPAD(0x0a14, PIN_INPUT_PULLUP | 0x80) /* ARM IRQ */ + //DM814X_IOPAD(0x0900, PIN_INPUT | 0x80) /* GPIO IRQ */ + DM814X_IOPAD(0x0a2c, PIN_INPUT_PULLUP | 0x80) /* GPIO RESET */ + >; + }; + + gpio4_pins: pinmux_gpio4_pins { + pinctrl-single,pins = < + /* The PLL doesn't react well to the SPI controller reset, so + * we force the CS lines to pull up as GPIOs until we're ready. + * See https://e2e.ti.com/support/processors/f/791/t/276011?Linux-support-for-AM3874-DM8148-in-Arago-linux-omap3 + */ + DM814X_IOPAD(0x0b3c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO0 */ + DM814X_IOPAD(0x0b40, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO1 */ + DM814X_IOPAD(0x0b44, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO2 */ + DM814X_IOPAD(0x0b48, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO3 */ + DM814X_IOPAD(0x0b4c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO4 */ + DM814X_IOPAD(0x0b50, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO5 */ + >; + }; + + spi2_pins: pinmux_spi2_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0950, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS1 as GPIO */ + DM814X_IOPAD(0x0818, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS2 as GPIO */ + >; + }; + + spi4_pins: pinmux_spi4_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0a7c, 0x20) + DM814X_IOPAD(0x0b74, 0x20) + DM814X_IOPAD(0x0b78, PIN_OUTPUT | 0x20) + DM814X_IOPAD(0x0b7c, PIN_OUTPUT_PULLDOWN | 0x20) + DM814X_IOPAD(0x0b80, PIN_INPUT | 0x20) + >; + }; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; + gpio-line-names = + "", "PROGRAM_B", "INIT_B", "DONE", /* 0-3 */ + "", "", "", "", /* 4-7 */ + "FMCA_TMS", "FMCA_TCK", "FMCA_TDO", "FMCA_TDI", /* 8-11 */ + "", "", "", "FMCA_TRST", /* 12-15 */ + "FMCB_TMS", "FMCB_TCK", "FMCB_TDO", "FMCB_TDI", /* 16-19 */ + "FMCB_TRST", "", "", "", /* 20-23 */ + "FPGA_TMS", "FPGA_TCK", "FPGA_TDO", "FPGA_TDI", /* 24-27 */ + "", "", "", ""; /* 28-31 */ +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio2_pins>; + gpio-line-names = + "PHYA_IRQ_N", "PHYA_RESET_N", "", "", /* 0-3 */ + "", "", "", "PHYB_IRQ_N", /* 4-7 */ + "PHYB_RESET_N", "ARM_IRQ", "GPIO_IRQ", ""; /* 8-11 */ +}; + +&gpio3 { + pinctrl-names = "default"; + /*pinctrl-0 = <&gpio3_pins>;*/ + gpio-line-names = + "", "", "ARMClkSel0", "", /* 0-3 */ + "EnFPGARef", "", "", "ARMClkSel1"; /* 4-7 */ +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio4_pins>; + gpio-line-names = + "BP_ARM_GPIO0", "BP_ARM_GPIO1", "BP_ARM_GPIO2", "BP_ARM_GPIO3", + "BP_ARM_GPIO4", "BP_ARM_GPIO5"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + dr_mode = "host"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + dr_mode = "host"; +}; + +&mcspi1 { + s25fl256@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + fsbl@0 { + /* 256 kB */ + label = "U-Boot-min"; + reg = <0 0x40000>; + }; + ssbl@1 { + /* 512 kB */ + label = "U-Boot"; + reg = <0x40000 0x80000>; + }; + bootenv@2 { + /* 256 kB */ + label = "U-Boot Env"; + reg = <0xc0000 0x40000>; + }; + kernel@3 { + /* 4 MB */ + label = "Kernel"; + reg = <0x100000 0x400000>; + }; + ipmi@4 { + label = "IPMI FRU"; + reg = <0x500000 0x40000>; + }; + fs@5 { + label = "File System"; + reg = <0x540000 0x1ac0000>; + }; + }; +}; + +&mcspi3 { + /* DMA event numbers stolen from MCASP */ + dmas = <&edma_xbar 8 0 16 &edma_xbar 9 0 17 + &edma_xbar 10 0 18 &edma_xbar 11 0 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; +}; + +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + + /* DMA event numbers stolen from MCASP, MCBSP */ + dmas = <&edma_xbar 12 0 20 &edma_xbar 13 0 21>; + dma-names = "tx0", "rx0"; +}; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 4fcf647815a2..063113a5da2d 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index f4a20cade808..cae4500194fe 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* AM437x GP EVM */ @@ -71,7 +68,7 @@ pinctrl-0 = <&matrix_keypad_default>; pinctrl-1 = <&matrix_keypad_sleep>; - linux,wakeup; + wakeup-source; row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */ &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index bb285409473e..f3ced6df0c9b 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index ca0896f80248..989cb60b9029 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -280,12 +280,6 @@ #size-cells = <1>; ranges = <0 0 0x4000>; - phy_sel: cpsw-phy-sel@650 { - compatible = "ti,am43xx-cpsw-phy-sel"; - reg= <0x650 0x4>; - reg-names = "gmii-sel"; - }; - am43xx_pinmux: pinmux@800 { compatible = "ti,am437-padconf", "pinctrl-single"; @@ -300,11 +294,17 @@ }; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,am43xx-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <2>; + }; + scm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; @@ -555,7 +555,6 @@ cpts_clock_shift = <29>; ranges = <0 0 0x8000>; syscon = <&scm_conf>; - cpsw-phy-sel = <&phy_sel>; davinci_mdio: mdio@1000 { compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio"; @@ -572,11 +571,13 @@ cpsw_emac0: slave@200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; }; cpsw_emac1: slave@300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 0>; }; }; }; @@ -1574,8 +1575,6 @@ target-module@cc000 { /* 0x481cc000, ap 50 46.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "d_can0"; - reg = <0xcc000 0x4>; - reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>; clock-names = "fck"; @@ -1595,8 +1594,6 @@ target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "d_can1"; - reg = <0xd0000 0x4>; - reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>; clock-names = "fck"; diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts index d23260d3a581..94cf07ea27f7 100644 --- a/arch/arm/boot/dts/am437x-sbc-t43.dts +++ b/arch/arm/boot/dts/am437x-sbc-t43.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "am437x-cm-t43.dts" diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 088cba09d34d..74eaa6a3b258 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* AM437x SK EVM */ diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 4ea753b3ee43..95314121d111 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* AM43x EPOS EVM */ @@ -80,6 +77,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&matrix_keypad_default>; pinctrl-1 = <&matrix_keypad_sleep>; + wakeup-source; row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ @@ -584,10 +582,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; phy-mode = "rmii"; -}; - -&phy_sel { - rmii-clock-ext; + phys = <&phy_gmii_sel 1 1>; }; &i2c0 { @@ -623,6 +618,12 @@ regulator-name = "vdcdc3"; regulator-boot-on; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + regulator-state-disk { + regulator-off-in-suspend; + }; }; dcdc4: regulator-dcdc4 { @@ -637,12 +638,16 @@ regulator-name = "v1_0bat"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; }; dcdc6: regulator-dcdc6 { regulator-name = "v1_8bat"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; }; ldo1: regulator-ldo1 { diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index e3f420793c12..091356f2a8c1 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for AM43xx clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &scm_clocks { sys_clkin_ck: sys_clkin_ck@40 { diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi new file mode 100644 index 000000000000..d51007c3e8c4 --- /dev/null +++ b/arch/arm/boot/dts/am5718.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "dra72x.dtsi" + +/ { + compatible = "ti,am5718", "ti,dra7"; +}; + +/* + * These modules are not present on AM5718 + * + * ATL + * VCP1, VCP2 + * MLB + * ISS + * USB3, USB4 + */ + +&usb3_tm { + status = "disabled"; +}; + +&usb4_tm { + status = "disabled"; +}; + +&atl_tm { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 6432309b39e3..1d5e99964bbf 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; -#include "dra72x.dtsi" +#include "am5718.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "dra7-mmc-iodelay.dtsi" diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi new file mode 100644 index 000000000000..82e5427ef6a9 --- /dev/null +++ b/arch/arm/boot/dts/am5728.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "dra74x.dtsi" + +/ { + compatible = "ti,am5728", "ti,dra7"; +}; + +/* + * These modules are not present on AM5728 + * + * EVE1, EVE2 + * ATL + * VCP1, VCP2 + * MLB + * ISS + * USB3, USB4 + */ + +&usb3_tm { + status = "disabled"; +}; + +&usb4_tm { + status = "disabled"; +}; + +&atl_tm { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index b2fb6e097be7..c65d7f6d3b5a 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -1,22 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; -#include "dra74x.dtsi" +#include "am5728.dtsi" #include "dra7-mmc-iodelay.dtsi" #include "dra74x-mmc-iodelay.dtsi" #include "am572x-idk-common.dtsi" / { model = "TI AM5728 IDK"; - compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", - "ti,dra7"; + compatible = "ti,am5728-idk", "ti,am5728", "ti,dra7"; }; &mmc1 { diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi new file mode 100644 index 000000000000..5e129759d04a --- /dev/null +++ b/arch/arm/boot/dts/am5748.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "dra76x.dtsi" + +/ { + compatible = "ti,am5748", "ti,dra762", "ti,dra7"; +}; + +/* + * These modules are not present on AM5748 + * + * EVE1, EVE2 + * ATL + * VCP1, VCP2 + * MLB + * ISS + * USB3, USB4 + */ + +&usb3_tm { + status = "disabled"; +}; + +&usb4_tm { + status = "disabled"; +}; + +&atl_tm { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index 378dfa780ac1..dc5141c35610 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -6,14 +6,14 @@ /dts-v1/; -#include "dra76x.dtsi" +#include "am5748.dtsi" #include "dra7-mmc-iodelay.dtsi" #include "dra76x-mmc-iodelay.dtsi" #include "am572x-idk-common.dtsi" / { model = "TI AM5748 IDK"; - compatible = "ti,am5728-idk", "ti,dra762", "ti,dra7"; + compatible = "ti,am5748-idk", "ti,am5748", "ti,dra762", "ti,dra7"; }; &qspi { diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 1e6620f139dd..d02f5fa61e5f 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; -#include "dra74x.dtsi" +#include "am5728.dtsi" #include "am57xx-commercial-grade.dtsi" #include "dra74x-mmc-iodelay.dtsi" #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts index 5a77b334923d..a374b5cd6db0 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "am57xx-beagle-x15-common.dtsi" diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts index 17c41da3b55f..4badd2144db9 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "am57xx-beagle-x15-common.dtsi" diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 70a71c641066..a5c24ed4d12f 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "am57xx-beagle-x15-common.dtsi" diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 4748ce8747ad..34ca761aeded 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -1,19 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for CompuLab CL-SOM-AM57x System-on-Module * * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include "dra74x.dtsi" +#include "am5728.dtsi" / { model = "CompuLab CL-SOM-AM57x"; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index f7bd26458915..423855a2a2d6 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "am57xx-industrial-grade.dtsi" @@ -420,6 +417,7 @@ vqmmc-supply = <&ldo1_reg>; bus-width = <4>; cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ + no-1-8-v; }; &mmc2 { diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index 31f9be632406..ce5bf1d92eab 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for CompuLab SBC-AM57x single board computer * * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. */ #include "am57xx-cl-som-am57x.dts" diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index d7c841932701..c36d28c295d6 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards * * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2 only. */ /dts-v1/; diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi index 0e4c7c4c8c09..610506723ea5 100644 --- a/arch/arm/boot/dts/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -22,9 +22,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "arm,realview-eb"; chosen { }; @@ -38,6 +39,7 @@ }; memory { + device_type = "memory"; /* 128 MiB memory @ 0x0 */ reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 83e0fbc4a1a1..cbbb8878daa3 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -23,9 +23,10 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; model = "ARM RealView PB1176"; compatible = "arm,realview-pb1176"; @@ -40,6 +41,7 @@ }; memory { + device_type = "memory"; /* 128 MiB memory @ 0x0 */ reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index 2f6aa24a0b67..2015619ca22c 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -23,9 +23,10 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; model = "ARM RealView PB11MPcore"; compatible = "arm,realview-pb11mp"; @@ -39,6 +40,7 @@ }; memory { + device_type = "memory"; /* * The PB11MPCore has 512 MiB memory @ 0x70000000 * and the first 256 are also remapped @ 0x00000000 diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index 916a97734f84..a81e9c282432 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -22,9 +22,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "arm,realview-pbx"; chosen { }; @@ -39,6 +40,7 @@ }; memory { + device_type = "memory"; /* 128 MiB memory @ 0x0 */ reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 2bfb3108b5b2..c910d157a686 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -114,48 +114,6 @@ }; }; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð1>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10 0>; /* MDIO address 16, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan0"; - }; - - port@1 { - reg = <1>; - label = "lan1"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan3"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &pciec { diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 89a354b43978..20f8d4667753 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -30,64 +30,6 @@ }; }; - dsa@0 { - status = "disabled"; - - compatible = "marvell,dsa"; - dsa,ethernet = <ð1>; - dsa,mii-bus = <&mdio>; - pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; - pinctrl-names = "default"; - #address-cells = <2>; - #size-cells = <0>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4 0>; - - port@0 { - reg = <0>; - label = "lan5"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - }; - - port@4 { - reg = <4>; - label = "lan1"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - - port@6 { - /* 88E1512 external phy */ - reg = <6>; - label = "lan6"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&rear_button_pins>; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi index 1b0d0680c8b6..0d81600ca247 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -93,6 +93,7 @@ bm,pool-long = <2>; bm,pool-short = <1>; buffer-manager = <&bm>; + phys = <&comphy1 1>; phy-mode = "sgmii"; status = "okay"; }; @@ -103,6 +104,7 @@ bm,pool-short = <1>; buffer-manager = <&bm>; managed = "in-band-status"; + phys = <&comphy5 2>; phy-mode = "sgmii"; sfp = <&sfp>; status = "okay"; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 929459c42760..3f4bb44d85f0 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -9,13 +9,15 @@ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; + model = "Marvell Armada 38x family SoC"; compatible = "marvell,armada380"; @@ -335,6 +337,43 @@ #clock-cells = <1>; }; + comphy: phy@18300 { + compatible = "marvell,armada-380-comphy"; + reg = <0x18300 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + comphy3: phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + comphy4: phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + comphy5: phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + coreclk: mvebu-sar@18600 { compatible = "marvell,armada-380-core-clock"; reg = <0x18600 0x04>; @@ -376,6 +415,8 @@ reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>; clocks = <&coreclk 2>, <&refclk>; clock-names = "nbclk", "fixed"; + interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; }; cpurst: cpurst@20800 { diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index f0c949831efb..b1b86934c688 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -7,13 +7,14 @@ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; model = "Marvell Armada 39x family SoC"; compatible = "marvell,armada390"; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index 59753470cd34..267d0c178e55 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -336,3 +336,11 @@ status = "disabled"; }; +&uart0 { + compatible = "marvell,armada-38x-uart"; +}; + +&uart1 { + compatible = "marvell,armada-38x-uart"; +}; + diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 7a2606c3b62e..8480a16919a0 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -210,53 +210,6 @@ compatible = "pwm-fan"; pwms = <&gpio0 24 4000>; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð0>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan4"; - }; - - port@1 { - reg = <1>; - label = "lan3"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - }; - - port@4 { - reg = <4>; - label = "internet"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &pciec { diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi index 3e4115c2cd75..037157e6c5ee 100644 --- a/arch/arm/boot/dts/artpec6.dtsi +++ b/arch/arm/boot/dts/artpec6.dtsi @@ -43,9 +43,10 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/dma/nbpfaxi.h> #include <dt-bindings/clock/axis,artpec6-clkctrl.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "axis,artpec6"; interrupt-parent = <&intc>; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 2375449c02d0..556ed469830c 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -13,12 +13,25 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk"; }; memory@80000000 { reg = <0x80000000 0x20000000>; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; }; &fmc { @@ -27,6 +40,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; +#include "openbmc-flash-layout.dtsi" }; }; @@ -97,3 +111,8 @@ &uhci { status = "okay"; }; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts index bdfd8c9f3a7c..521afbea2c5b 100644 --- a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -173,6 +173,16 @@ }; }; }; + + dps650ab@58 { + compatible = "delta,dps650ab"; + reg = <0x58>; + }; + + dps650ab@59 { + compatible = "delta,dps650ab"; + reg = <0x59>; + }; }; &i2c9 { diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts index 9f194b5eeba4..43aba4071a5c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -56,6 +56,12 @@ memory@80000000 { reg = <0x80000000 0x20000000>; }; + + ast-adc-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; }; &pinctrl { diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index f8e7b71af7e6..c4521eda787c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -21,6 +21,17 @@ memory@80000000 { reg = <0x80000000 0x20000000>; }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 7>; + }; }; &fmc { @@ -43,6 +54,21 @@ }; }; +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&lpc_ctrl { + // Enable lpc clock + status = "okay"; +}; + +&vuart { + // VUART Host Console + status = "okay"; +}; + &uart1 { // Host Console status = "okay"; @@ -51,11 +77,33 @@ &pinctrl_rxd1_default>; }; +&uart2 { + // SoL Host Console + status = "okay"; +}; + +&uart3 { + // SoL BMC Console + status = "okay"; +}; + &uart5 { // BMC Console status = "okay"; }; +&kcs2 { + // BMC KCS channel 2 + status = "okay"; + kcs_addr = <0xca8>; +}; + +&kcs3 { + // BMC KCS channel 3 + status = "okay"; + kcs_addr = <0xca2>; +}; + &mac0 { status = "okay"; @@ -64,6 +112,10 @@ use-ncsi; }; +&adc { + status = "okay"; +}; + &i2c0 { status = "okay"; //Airmax Conn B, CPU0 PIROM, CPU1 PIROM @@ -122,6 +174,10 @@ &i2c8 { status = "okay"; + tmp421@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; //Mezz Sensor SMBus }; @@ -140,7 +196,7 @@ }; fan@1 { - reg = <0x00>; - aspeed,fan-tach-ch = /bits/ 8 <0x01>; + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts new file mode 100644 index 000000000000..2337ee23f5c4 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Inspur Corporation +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "ON5263M5 BMC"; + compatible = "inspur,on5263m5-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "earlyprintk"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; + }; + }; + + leds { + compatible = "gpio-leds"; + bmc_alive { + label = "bmc_alive"; + gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; + +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c6 { + status = "okay"; + + tmp421@4e { + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + + tmp112@48 { + compatible = "ti,tmp112"; + reg = <0x48>; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&i2c7 { + status = "okay"; + + adm1278@11 { + compatible = "adi,adm1278"; + reg = <0x11>; + }; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; +}; + +&adc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index 9aa1d4467453..b249da80fb83 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -32,9 +32,9 @@ no-map; }; - flash_memory: region@98000000 { + flash_memory: region@5c000000 { no-map; - reg = <0x98000000 0x01000000>; /* 16MB */ + reg = <0x5C000000 0x02000000>; /* 32MB */ }; }; @@ -169,6 +169,11 @@ &i2c3 { status = "okay"; + + occ-hwmon@50 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x50>; + }; }; &i2c4 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 76fe994f2ba4..418a1988b262 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -35,6 +35,13 @@ reg = <0x9ef00000 0x00100000>; no-map; }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; }; leds { @@ -238,6 +245,7 @@ &gfx { status = "okay"; + memory-region = <&gfx_memory>; }; &pinctrl { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index ad54117c075e..f1356ca794d8 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -26,6 +26,13 @@ no-map; reg = <0x98000000 0x04000000>; /* 64M */ }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; }; gpio-keys { @@ -186,13 +193,49 @@ status = "okay"; label = "bmc"; m25p,fast-read; -#include "openbmc-flash-layout.dtsi" + + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x1F80000 >; + label = "obmc-ubi"; + }; + }; }; flash@1 { status = "okay"; - label = "alt"; + label = "alt-bmc"; m25p,fast-read; + + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x1F80000 >; + label = "alt-obmc-ubi"; + }; + }; + }; }; @@ -565,6 +608,7 @@ &gfx { status = "okay"; + memory-region = <&gfx_memory>; }; &pinctrl { @@ -592,3 +636,7 @@ &adc { status = "okay"; }; + +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts index 385c0f4b69ee..0d7c6339da46 100644 --- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts +++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts @@ -116,6 +116,10 @@ status = "okay"; }; +&lpc_ctrl { + status = "okay"; +}; + &lpc_snoop { status = "okay"; snoop-ports = <0x80>; @@ -134,6 +138,10 @@ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; }; +&uart1 { + status = "okay"; +}; + &uart5 { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 69f6b9d2e7e7..5d7050d00874 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -197,6 +197,7 @@ gpio-ranges = <&pinctrl 0 0 220>; clocks = <&syscon ASPEED_CLK_APB>; interrupt-controller; + #interrupt-cells = <2>; }; timer: timer@1e782000 { @@ -208,6 +209,12 @@ clock-names = "PCLK"; }; + rtc: rtc@1e781000 { + compatible = "aspeed,ast2400-rtc"; + reg = <0x1e781000 0x18>; + status = "disabled"; + }; + uart1: serial@1e783000 { compatible = "ns16550a"; reg = <0x1e783000 0x20>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index d107459fc0f8..4345c3153ca7 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -47,6 +47,13 @@ reg = <0x80000000 0>; }; + edac: sdram@1e6e0000 { + compatible = "aspeed,ast2500-sdram-edac"; + reg = <0x1e6e0000 0x174>; + interrupts = <0>; + status = "disabled"; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -225,6 +232,10 @@ compatible = "aspeed,ast2500-gfx", "syscon"; reg = <0x1e6e6000 0x1000>; reg-io-width = <4>; + clocks = <&syscon ASPEED_CLK_GATE_D1CLK>; + resets = <&syscon ASPEED_RESET_CRT1>; + status = "disabled"; + interrupts = <0x19>; }; adc: adc@1e6e9000 { @@ -236,6 +247,16 @@ status = "disabled"; }; + video: video@1e700000 { + compatible = "aspeed,ast2500-video-engine"; + reg = <0x1e700000 0x1000>; + clocks = <&syscon ASPEED_CLK_GATE_VCLK>, + <&syscon ASPEED_CLK_GATE_ECLK>; + clock-names = "vclk", "eclk"; + interrupts = <7>; + status = "disabled"; + }; + sram: sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x9000>; // 36K @@ -250,6 +271,13 @@ gpio-ranges = <&pinctrl 0 0 220>; clocks = <&syscon ASPEED_CLK_APB>; interrupt-controller; + #interrupt-cells = <2>; + }; + + rtc: rtc@1e781000 { + compatible = "aspeed,ast2500-rtc"; + reg = <0x1e781000 0x18>; + status = "disabled"; }; timer: timer@1e782000 { @@ -330,8 +358,32 @@ ranges = <0x0 0x1e789000 0x1000>; lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2500-lpc-bmc"; + compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon"; reg = <0x0 0x80>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80>; + + kcs1: kcs1@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + interrupts = <8>; + kcs_chan = <1>; + status = "disabled"; + }; + kcs2: kcs2@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + interrupts = <8>; + kcs_chan = <2>; + status = "disabled"; + }; + kcs3: kcs3@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + interrupts = <8>; + kcs_chan = <3>; + status = "disabled"; + }; }; lpc_host: lpc-host@80 { @@ -343,6 +395,13 @@ #size-cells = <1>; ranges = <0x0 0x80 0x1e0>; + kcs4: kcs4@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + interrupts = <8>; + kcs_chan = <4>; + status = "disabled"; + }; + lpc_ctrl: lpc-ctrl@0 { compatible = "aspeed,ast2500-lpc-ctrl"; reg = <0x0 0x80>; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index e3e14b7e25aa..0d695c762e54 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based) * * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>, * Robert Nelson <robertcnelson@gmail.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9g25.dtsi" diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi index 295a5a43fe01..47721c9a2e42 100644 --- a/arch/arm/boot/dts/at91-cosino.dtsi +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91-cosino.dtsi - Device Tree file for Cosino core module * @@ -7,8 +8,6 @@ * Derived from at91sam9x5ek.dtsi by: * Copyright (C) 2012 Atmel, * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ #include "at91sam9g35.dtsi" diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts index c452654b843a..8fde06adf7cb 100644 --- a/arch/arm/boot/dts/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91-cosino_mega2560.dts - Device Tree file for Cosino board with * Mega 2560 extension @@ -8,8 +9,6 @@ * Derived from at91sam9g35ek.dts by: * Copyright (C) 2012 Atmel, * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts index d413e2d9abdf..683b9e37f9c5 100644 --- a/arch/arm/boot/dts/at91-foxg20.dts +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -1,11 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board * * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC) * * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9g20.dtsi" diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 1003846679c1..90996eaf73b2 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board * * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com> * 2014-2015 Gaël PORTAY <g.portay@overkiz.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9g20.dtsi" diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts index 30041e8f12d5..86d821884bd4 100644 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ b/arch/arm/boot/dts/at91-kizbox2.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board * * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "sama5d31.dtsi" diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts index 15b0746e44e2..0620dcdf4dfb 100644 --- a/arch/arm/boot/dts/at91-kizboxmini.dts +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board * * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9g25.dtsi" diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi index c7b964e25321..41f163955b1e 100644 --- a/arch/arm/boot/dts/at91-linea.dtsi +++ b/arch/arm/boot/dts/at91-linea.dtsi @@ -1,11 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module. * * Copyright (C) 2017 Axentia Technologies AB * * Author: Peter Rosin <peda@axentia.se> - * - * Licensed under GPLv2 or later. */ #include "sama5d31.dtsi" diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts index 0f6d335125e2..f245944bd5d7 100644 --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -22,7 +22,7 @@ wakeup { label = "Wakeup"; linux,code = <10>; - gpio-key,wakeup; + wakeup-source; gpios = <&pioB 27 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index 72e9148ca096..a50b7fd2149f 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board * * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ /dts-v1/; #include "at91sam9260.dtsi" diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts index 70cb36f7a9d7..954404ed8158 100644 --- a/arch/arm/boot/dts/at91-sam9_l9260.dts +++ b/arch/arm/boot/dts/at91-sam9_l9260.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board * * Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9260.dtsi" diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index cf0087b4c9e1..7788d5db65c2 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board * * Copyright (c) 2017, Microchip Technology Inc. * 2017 Cristian Birsan <cristian.birsan@microchip.com> * 2017 Claudiu Beznea <claudiu.beznea@microchip.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" @@ -62,6 +25,20 @@ ahb { apb { + qspi1: spi@f0024000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + }; + }; + macb0: ethernet@f8008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_default>; @@ -78,6 +55,22 @@ pinctrl@fc038000 { + pinctrl_qspi1_default: qspi1_default { + sck_cs { + pinmux = <PIN_PB5__QSPI1_SCK>, + <PIN_PB6__QSPI1_CS>; + bias-disable; + }; + + data { + pinmux = <PIN_PB7__QSPI1_IO0>, + <PIN_PB8__QSPI1_IO1>, + <PIN_PB9__QSPI1_IO2>, + <PIN_PB10__QSPI1_IO3>; + bias-pull-up; + }; + }; + pinctrl_macb0_default: macb0_default { pinmux = <PIN_PD9__GTXCK>, <PIN_PD10__GTXEN>, diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 4a258867ddf1..89f0c9979b89 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board * @@ -5,44 +6,6 @@ * 2016 Nicolas Ferre <nicolas.ferre@atmel.com> * 2017 Cristian Birsan <cristian.birsan@microchip.com> * 2017 Claudiu Beznea <claudiu.beznea@microchip.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "at91-sama5d27_som1.dtsi" @@ -109,6 +72,10 @@ status = "okay"; }; + qspi1: spi@f0024000 { + status = "okay"; + }; + spi0: spi@f8000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0_default>; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index fa54e8866f1e..808e399fd39a 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -1,52 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board * * Copyright (C) 2015 Atmel, * 2015 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/active-semi,8945a-regulator.h> / { model = "Atmel SAMA5D2 Xplained"; @@ -181,49 +145,102 @@ regulator-name = "VDD_1V35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt=<1400000>; + regulator-suspend-max-microvolt=<1400000>; + regulator-changeable-in-suspend; + regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>; + }; }; vdd_1v2_reg: REG_DCDC2 { regulator-name = "VDD_1V2"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_reg: REG_DCDC3 { regulator-name = "VDD_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_fuse_reg: REG_LDO1 { regulator-name = "VDD_FUSE"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_lp_reg: REG_LDO2 { regulator-name = "VDD_3V3_LP"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_led_reg: REG_LDO3 { regulator-name = "VDD_LED"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_sdhc_1v8_reg: REG_LDO4 { regulator-name = "VDD_SDHC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 322a744e4363..61f068a7b362 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board * * Copyright (C) 2014 Atmel, * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "sama5d36.dtsi" diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index d3e79fbf1944..0be184a870eb 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015 Marek Vasut <marex@denx.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "sama5d4.dtsi" diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts index fe05aaa7ac87..af4969485c88 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015 Marek Vasut <marex@denx.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 43aef56ac74a..fdfc37d716e0 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board * * Copyright (C) 2015 Atmel, * 2015 Josh Wu <josh.wu@atmel.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "sama5d4.dtsi" diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 12d5af938aa3..0cc1cff13e46 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit * * Copyright (C) 2014 Atmel, * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "sama5d4.dtsi" diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts index fe8876eaf917..3ca97b47c69c 100644 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -1,11 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board * * Copyright (C) 2017 Axentia Technologies AB * * Author: Peter Rosin <peda@axentia.se> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include <dt-bindings/pwm/pwm.h> diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index 430277291e02..15050fdd479d 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for VInCo platform * * Copyright (C) 2014 Atmel, * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> * 2015 Gregory CLEMENT <gregory.clement@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "sama5d4.dtsi" diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts index 5b9512a6c89c..54d130c92185 100644 --- a/arch/arm/boot/dts/at91-wb45n.dts +++ b/arch/arm/boot/dts/at91-wb45n.dts @@ -22,7 +22,7 @@ label = "IRQBTN"; linux,code = <99>; gpios = <&pioB 18 GPIO_ACTIVE_LOW>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts index 8cecc7051a86..a5e45bb95c04 100644 --- a/arch/arm/boot/dts/at91-wb50n.dts +++ b/arch/arm/boot/dts/at91-wb50n.dts @@ -23,7 +23,7 @@ label = "BTNESC"; linux,code = <1>; /* ESC button */ gpios = <&pioA 10 GPIO_ACTIVE_LOW>; - gpio-key,wakeup = <1>; + wakeup-source; }; irqbtn@31 { @@ -31,7 +31,7 @@ label = "IRQBTN"; linux,code = <99>; /* SysReq button */ gpios = <&pioE 31 GPIO_ACTIVE_LOW>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 2ad69a7fbc00..44385718d9d4 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC * @@ -6,17 +7,16 @@ * 2012 Joachim Eastwood <manabian@gmail.com> * * Based on at91sam9260.dtsi - * - * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91RM9200 family SoC"; compatible = "atmel,at91rm9200"; interrupt-parent = <&aic>; @@ -49,6 +49,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi index 93ca66f80360..c3d4177b9823 100644 --- a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi +++ b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC * * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2 or later. */ #include "at91rm9200.dtsi" diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 81aaf8151c76..1e0bf5afa913 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit * * Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com> - * - * Licensed under GPLv2 only */ /dts-v1/; #include "at91rm9200.dtsi" diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 7cd9c3bc4dfb..dee9c0c8a096 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -1,20 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC * * Copyright (C) 2011 Atmel, * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>, * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9260 family SoC"; compatible = "atmel,at91sam9260"; interrupt-parent = <&aic>; @@ -46,6 +46,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index 07d1b571e601..81f808a10931 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Atmel at91sam9260 Evaluation Kit * * Copyright (C) 2016 Atmel, * 2016 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "at91sam9260.dtsi" diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 01d700b63b45..dba025a98527 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -1,18 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC * * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> - * - * Licensed under GPLv2 only. */ -#include "skeleton.dtsi" #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9261 family SoC"; compatible = "atmel,at91sam9261"; interrupt-parent = <&aic>; @@ -43,6 +43,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index a57f2d435dca..1fa84d2f06c7 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board * * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> - * - * Licensed under GPLv2 only. */ /dts-v1/; #include "at91sam9261.dtsi" diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index c5766da4e54e..99678abdda93 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -1,18 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2 only. */ -#include "skeleton.dtsi" #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9263 family SoC"; compatible = "atmel,at91sam9263"; interrupt-parent = <&aic>; @@ -45,6 +45,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 727096f24f7c..45e0c6e88cab 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2 only */ /dts-v1/; #include "at91sam9263.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi index b34a6c65bd44..d77c69ad7f02 100644 --- a/arch/arm/boot/dts/at91sam9g15.dtsi +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ #include "at91sam9x5.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts index d1d2b400f1c6..97100d298400 100644 --- a/arch/arm/boot/dts/at91sam9g15ek.dts +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board * * Copyright (C) 2012 Atmel, * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9g15.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index e976fd6bc6fd..4117cf880508 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ #include "at91sam9260.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts index bbfd753112c9..6de7a7cd3c07 100644 --- a/arch/arm/boot/dts/at91sam9g20ek.dts +++ b/arch/arm/boot/dts/at91sam9g20ek.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ /dts-v1/; #include "at91sam9g20ek_common.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts index bdb799bad179..2db95e8ffc64 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ /dts-v1/; #include "at91sam9g20ek_common.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index ec1f17ab6753..bda22700110c 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ #include "at91sam9g20.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index d8bb56253e64..d2f13afb35ea 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ #include "at91sam9x5.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index ac730812a81d..a02c6c79ce52 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board * * Copyright (C) 2012 Atmel, * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9g25.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index 333e158feb61..48c2bc4a7753 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ #include "at91sam9x5.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts index 23ec8b13f30a..449ec712ab52 100644 --- a/arch/arm/boot/dts/at91sam9g35ek.dts +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board * * Copyright (C) 2012 Atmel, * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9g35.dtsi" diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index d16db1fa7e15..9483609a2105 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC * applies to AT91SAM9G45, AT91SAM9M10, @@ -5,11 +6,8 @@ * * Copyright (C) 2011 Atmel, * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -17,6 +15,8 @@ #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9G45 family SoC"; compatible = "atmel,at91sam9g45"; interrupt-parent = <&aic>; @@ -51,6 +51,7 @@ }; memory { + device_type = "memory"; reg = <0x70000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 25888339d8de..06d74ff1a7d0 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board * * Copyright (C) 2011 Atmel, * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9g45.dtsi" diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 37cb81f457b5..ea675174432e 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -1,13 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC * * Copyright (C) 2012 Atmel, * 2012 Hong Xu <hong.xu@atmel.com> - * - * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -15,6 +13,8 @@ #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9N12 SoC"; compatible = "atmel,at91sam9n12"; interrupt-parent = <&aic>; @@ -47,6 +47,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index c43095c5cb5c..ea5cef0b0974 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board * * Copyright (C) 2012 Atmel, * 2012 Hong Xu <hong.xu@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9n12.dtsi" diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 3862ff2f26e0..e2d38ce43442 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -1,13 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC * * Copyright (C) 2014 Microchip * Alexandre Belloni <alexandre.belloni@free-electrons.com> - * - * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/clock/at91.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -15,6 +13,8 @@ #include <dt-bindings/pwm/pwm.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9RL family SoC"; compatible = "atmel,at91sam9rl", "atmel,at91sam9"; interrupt-parent = <&aic>; @@ -48,6 +48,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 27d8a1f44233..3a3869444fdc 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board * * Copyright (C) 2014 Microchip * Alexandre Belloni <alexandre.belloni@free-electrons.com> - * - * Licensed under GPLv2 only */ /dts-v1/; #include "at91sam9rl.dtsi" diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index a99703a262c9..0fe8802e1242 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ #include "at91sam9x5.dtsi" diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index f705a3165656..4e1c3df89a6c 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board * * Copyright (C) 2012 Atmel, * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9x25.dtsi" diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index bca274d33f68..0bfa21f18f87 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ #include "at91sam9x5.dtsi" diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts index fcb67180ea26..7646c680fa97 100644 --- a/arch/arm/boot/dts/at91sam9x35ek.dts +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board * * Copyright (C) 2012 Atmel, * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9x35.dtsi" diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 07443a387a8f..9b7ce6bb1ddc 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC * applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, @@ -5,11 +6,8 @@ * * Copyright (C) 2012 Atmel, * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -17,6 +15,8 @@ #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9x5 family SoC"; compatible = "atmel,at91sam9x5"; interrupt-parent = <&aic>; @@ -49,6 +49,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi index 125f9e3b49ad..04ccb25d342c 100644 --- a/arch/arm/boot/dts/at91sam9x5_can.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 * Ethernet interface. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi index c3e45b57b6a2..4ce98f05d7db 100644 --- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an * Image Sensor Interface. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi index 12595fb11691..584f840cc6a5 100644 --- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an * LCD controller. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi index 57c2e5a4fb53..222aa30f6860 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 * Ethernet interface. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi index 59b8da87d3c1..26bf9b5de9ee 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2 * Ethernet interfaces. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 9102dfbed5d8..098d3fef5c37 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with * 4 USART. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index c4cc9cc945fa..75d2f7fd314f 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module * * Copyright (C) 2012 Atmel, * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ / { diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi index 34c089fe0bc0..b04ebf1a3131 100644 --- a/arch/arm/boot/dts/at91sam9x5dm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module * @@ -5,8 +6,6 @@ * 2014 Free Electrons * * Author: Boris Brezillon <boris.brezillon@free-electrons.com> - * - * Licensed under GPLv2 or later. */ / { diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 4a2e13c8bf00..2ad0a43656e4 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board * * Copyright (C) 2012 Atmel, * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ #include "at91sam9x5cm.dtsi" diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi index 1304452f0fae..3f9d8caf8b0a 100644 --- a/arch/arm/boot/dts/at91sam9xe.dtsi +++ b/arch/arm/boot/dts/at91sam9xe.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC * * Copyright (C) 2015 Atmel, * 2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "at91sam9260.dtsi" diff --git a/arch/arm/boot/dts/atlas6-evb.dts b/arch/arm/boot/dts/atlas6-evb.dts index ab042ca8dea1..89e430392f26 100644 --- a/arch/arm/boot/dts/atlas6-evb.dts +++ b/arch/arm/boot/dts/atlas6-evb.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for CSR SiRFatlas6 Evaluation Board * * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ /dts-v1/; @@ -15,6 +14,7 @@ compatible = "sirf,atlas6-cb", "sirf,atlas6"; memory { + device_type = "memory"; reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 29598667420b..8ac5d1524a43 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -1,12 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for CSR SiRFatlas6 SoC * * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" / { compatible = "sirf,atlas6"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts index 900e03b7a7b2..e0c0291ac9fd 100644 --- a/arch/arm/boot/dts/atlas7-evb.dts +++ b/arch/arm/boot/dts/atlas7-evb.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for CSR SiRFatlas7 Evaluation Board * * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ /dts-v1/; diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi index 83449b33de6b..99c9d9d9267f 100644 --- a/arch/arm/boot/dts/atlas7.dtsi +++ b/arch/arm/boot/dts/atlas7.dtsi @@ -1,12 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for CSR SiRFatlas7 SoC * * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" / { compatible = "sirf,atlas7"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts index a9d60471d9ff..2e2ad3c7ee77 100644 --- a/arch/arm/boot/dts/axm5516-amarillo.dts +++ b/arch/arm/boot/dts/axm5516-amarillo.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/boot/dts/axm5516-amarillo.dts * * Copyright (C) 2013 LSI - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ /dts-v1/; diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi index b85f360cb125..3bcf4e0a3c85 100644 --- a/arch/arm/boot/dts/axm5516-cpus.dtsi +++ b/arch/arm/boot/dts/axm5516-cpus.dtsi @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/boot/dts/axm5516-cpus.dtsi * * Copyright (C) 2013 LSI - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ / { diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi index 47799f59faa5..7676a65059a4 100644 --- a/arch/arm/boot/dts/axm55xx.dtsi +++ b/arch/arm/boot/dts/axm55xx.dtsi @@ -1,20 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/boot/dts/axm55xx.dtsi * * Copyright (C) 2013 LSI - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/lsi,axm5516-clks.h> -#include "skeleton64.dtsi" - / { + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&gic>; aliases { diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi index bd83962d3627..1dfeeceabf4c 100644 --- a/arch/arm/boot/dts/axp81x.dtsi +++ b/arch/arm/boot/dts/axp81x.dtsi @@ -171,4 +171,8 @@ status = "disabled"; }; }; + + usb_power_supply: usb-power-supply { + compatible = "x-powers,axp813-usb-power-supply"; + }; }; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 253df7170a4e..5f7b46503a51 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -34,9 +34,9 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/bcm-cygnus.h> -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "brcm,cygnus"; model = "Broadcom Cygnus SoC"; interrupt-parent = <&gic>; @@ -45,6 +45,11 @@ ethernet0 = ð0; }; + memory { + device_type = "memory"; + reg = <0 0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 0d2538b46139..6925b30c2253 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -34,9 +34,9 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/bcm-nsp.h> -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "brcm,nsp"; model = "Broadcom Northstar Plus SoC"; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index db7cded1b7ad..b99c2e579622 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -16,9 +16,9 @@ #include "dt-bindings/clock/bcm281xx.h" -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; model = "BCM11351 SoC"; compatible = "brcm,bcm11351"; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts index e87cb26ddf84..8b045cfab64b 100644 --- a/arch/arm/boot/dts/bcm21664-garnet.dts +++ b/arch/arm/boot/dts/bcm21664-garnet.dts @@ -22,6 +22,7 @@ compatible = "brcm,bcm21664-garnet", "brcm,bcm21664"; memory { + device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 266f2611dc22..758daa334148 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -16,9 +16,9 @@ #include "dt-bindings/clock/bcm21664.h" -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; model = "BCM21664 SoC"; compatible = "brcm,bcm21664"; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/bcm23550-sparrow.dts index 4d525ccb48c8..1c66b15f3013 100644 --- a/arch/arm/boot/dts/bcm23550-sparrow.dts +++ b/arch/arm/boot/dts/bcm23550-sparrow.dts @@ -46,6 +46,7 @@ }; memory { + device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; }; diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi index a7a643f38385..701198f5f498 100644 --- a/arch/arm/boot/dts/bcm23550.dtsi +++ b/arch/arm/boot/dts/bcm23550.dtsi @@ -36,9 +36,9 @@ /* BCM23550 and BCM21664 have almost identical clocks */ #include "dt-bindings/clock/bcm21664.h" -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; model = "BCM23550 SoC"; compatible = "brcm,bcm23550"; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index 9ce91dd60cb6..fbfca83bd28f 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -22,6 +22,7 @@ compatible = "brcm,bcm28155-ap", "brcm,bcm11351"; memory { + device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index 2cd9c5e4f892..db8a6017f220 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -31,8 +31,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "SDA0", - "SCL0", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index cfbdaacbaeba..1e40d672b055 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -33,8 +33,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "SDA0", - "SCL0", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 5641d162dfdb..28e7513ce617 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -93,7 +93,7 @@ }; &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; }; &pwm { diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 644d907bafbb..ba0167df6c5f 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -25,8 +25,6 @@ wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wl_on>; reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; }; }; @@ -40,8 +38,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "GPIO0", - "GPIO1", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", @@ -98,11 +96,6 @@ "SD_DATA3_R"; pinctrl-0 = <&gpioout &alt0>; - - wl_on: wl-on { - brcm,pins = <41>; - brcm,function = <BCM2835_FSEL_GPIO_OUT>; - }; }; &hdmi { diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index 00323ba8f7de..3b35a8a4a55f 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -28,8 +28,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "SDA0", - "SCL0", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 29f970f864dc..715d50c64529 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -1,7 +1,7 @@ #include <dt-bindings/power/raspberrypi-power.h> / { - memory { + memory@0 { device_type = "memory"; reg = <0 0x10000000>; }; @@ -19,8 +19,6 @@ soc { firmware: firmware { compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; - #address-cells = <0>; - #size-cells = <0>; mboxes = <&mailbox>; }; @@ -87,10 +85,6 @@ power-domains = <&power RPI_POWER_DOMAIN_USB>; }; -&v3d { - power-domains = <&power RPI_POWER_DOMAIN_V3D>; -}; - &hdmi { power-domains = <&power RPI_POWER_DOMAIN_HDMI>; status = "okay"; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index ac4408b34b58..7b4e651bafdd 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -9,7 +9,7 @@ compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; model = "Raspberry Pi 2 Model B"; - memory { + memory@0 { reg = <0 0x40000000>; }; @@ -28,6 +28,72 @@ }; &gpio { + /* + * Taken from rpi_SCH_2b_1p2_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "", /* GPIO30 */ + "LAN_RUN", + "CAM_GPIO1", + "", /* GPIO33 */ + "", /* GPIO34 */ + "PWR_LOW_N", + "", /* GPIO36 */ + "", /* GPIO37 */ + "USB_LIMIT", + "", /* GPIO39 */ + "PWM0_OUT", + "CAM_GPIO0", + "SMPS_SCL", + "SMPS_SDA", + "ETHCLK", + "PWM1_OUT", + "HDMI_HPD_N", + "STATUS_LED", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts new file mode 100644 index 000000000000..7f4437a8eedb --- /dev/null +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837"; + model = "Raspberry Pi 3 Model A+"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + memory@0 { + reg = <0 0x20000000>; + }; + + leds { + act { + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + }; + + pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "", + "BT_WL_ON", + "STATUS_LED_R", + "", + "", + "CAM_GPIO0", + "CAM_GPIO1", + ""; + status = "okay"; + }; +}; + +&gpio { + /* + * This is mostly based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "HDMI_HPD_N", + "STATUS_LED_G", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "PWM0_OUT", + "PWM1_OUT", + "", /* GPIO42 */ + "WIFI_CLK", + "SDA0", + "SCL0", + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; +}; + +&hdmi { + hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; + status = "okay"; +}; + +/* + * SDHCI is used to control the SDIO for wireless + * + * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven + * by a single GPIO. We can't give GPIO control to one of the drivers, + * otherwise the other part would get unexpectedly disturbed. + */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + status = "okay"; + bus-width = <4>; + non-removable; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SDHOST is used to drive the SD card */ +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; + bus-width = <4>; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + }; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index 42bb09044cc7..c6fa34c24100 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -14,7 +14,7 @@ stdout-path = "serial1:115200n8"; }; - memory { + memory@0 { reg = <0 0x40000000>; }; @@ -42,7 +42,7 @@ #gpio-cells = <2>; gpio-line-names = "BT_ON", "WL_ON", - "STATUS_LED", + "STATUS_LED_R", "LAN_RUN", "", "CAM_GPIO0", @@ -52,6 +52,76 @@ }; }; +&gpio { + /* + * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "HDMI_HPD_N", + "STATUS_LED_G", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "PWM0_OUT", + "PWM1_OUT", + "ETHCLK", + "WIFI_CLK", + "SDA0", + "SCL0", + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; +}; + &hdmi { hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index 0c155dd4f396..ce71f578c51a 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -14,7 +14,7 @@ stdout-path = "serial1:115200n8"; }; - memory { + memory@0 { reg = <0 0x40000000>; }; @@ -39,7 +39,7 @@ "WL_ON", "STATUS_LED", "LAN_RUN", - "HPD_N", + "HDMI_HPD_N", "CAM_GPIO0", "CAM_GPIO1", "PWR_LOW_N"; @@ -47,6 +47,76 @@ }; }; +&gpio { + /* + * Taken from rpi_SCH_3b_1p2_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "", /* GPIO 28 */ + "LAN_RUN_BOOT", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "PWM0_OUT", + "PWM1_OUT", + "ETHCLK", + "WIFI_CLK", + "SDA0", + "SCL0", + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi index 4a89a1885a3d..81399b2c5af9 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -4,7 +4,7 @@ #include "bcm2836-rpi.dtsi" / { - memory { + memory@0 { reg = <0 0x40000000>; }; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 31b29646b14c..9777644c6c2b 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/clock/bcm2835-aux.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/soc/bcm2835-pm.h> /* firmware-provided startup stubs live here, where the secondary CPUs are * spinning. @@ -120,9 +121,18 @@ #interrupt-cells = <2>; }; - watchdog@7e100000 { - compatible = "brcm,bcm2835-pm-wdt"; - reg = <0x7e100000 0x28>; + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; }; clocks: cprman@7e101000 { @@ -629,6 +639,7 @@ compatible = "brcm,bcm2835-v3d"; reg = <0x7ec00000 0x1000>; interrupts = <1 10>; + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; }; vc4: gpu { diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 79d454ff3be4..1c6f561ac52b 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 99365bb8c41e..e550799a6ae0 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index bc330b1f6de0..7bfa2238f70b 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts index 258d2b251900..fd361c9b1374 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts index babcfec50dde..7c34360d3285 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts @@ -18,6 +18,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index e7fdaed99bd0..969b8d78e492 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 42bafc644013..b62854ee27ab 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index dce35eb79dbe..75f7b4ef35da 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -21,6 +21,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index b7a024b7951b..148d16a9085e 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index f7f834cd3448..eed3aab6679b 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 76a2bab3bc6f..fe842f2f1ca7 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index 69e3570e03dd..6fcbb0509ba0 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 0f6f0fe13bfb..b3e8cc90b13f 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index f77089744996..fdeaa895512f 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index 4d427863756f..0d510cb15ec3 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index 189cc3dcd6ef..962e89edba11 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 4cb10f88a95e..8f1e565c3db4 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index 77d1687b4228..ce888b1835d1 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts index 983149b55269..ed8619b54d69 100644 --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index ca41481b44bd..1f87993eae1d 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index aa69e656d395..6c6199a53d09 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -31,6 +31,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index b527d2ff987e..f806be5da723 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 03c1ab188576..658a56ff8a5c 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 36efe410dcd7..5fd47eec4407 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index 3e5e9972cd97..6604be6ff0a0 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts index 7fd85475893d..567ebbd5a0e9 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index 7acbecd42950..ac2d136ed334 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index f4558d9d2769..74371e821b1a 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts index bdad7267255a..b44af63ee310 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 30719380b6c0..eebc0d43e220 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts new file mode 100644 index 000000000000..456045f17a00 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 Hamster Tian <haotia@gmail.com> + * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com> + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708"; + model = "Phicomm K3"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0000000 0x0080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x0080000 0x0100000>; + }; + + partition@180000{ + label = "phicomm"; + reg = <0x0180000 0x0280000>; + read-only; + }; + + partition@400000 { + label = "firmware"; + reg = <0x0400000 0x7C00000>; + compatible = "brcm,trx"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts index 74c83b0ca54e..eb59508578e4 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2017 Luxul Inc. - * - * Licensed under the ISC license. */ /dts-v1/; @@ -17,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts index 214df18f3a75..4c71f5e95e00 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2017 Luxul Inc. - * - * Licensed under the ISC license. */ /dts-v1/; @@ -17,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index e15e2a1e9d8c..5ad53ea52d0a 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index fd7af943fb0b..ac5266ee8d4c 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -13,9 +13,10 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; chipcommonA { diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts index 431cda514230..2e7fda9b998c 100644 --- a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts +++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts @@ -20,6 +20,7 @@ }; memory@0 { + device_type = "memory"; reg = <0x00000000 0x08000000>, <0x68000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 5054fa9eb0d0..b29695bd4855 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -7,9 +7,10 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; aliases { diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi index 066adfb10bd5..a9bb7ad81378 100644 --- a/arch/arm/boot/dts/bcm59056.dtsi +++ b/arch/arm/boot/dts/bcm59056.dtsi @@ -1,11 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2014 Linaro Limited * Author: Matt Porter <mporter@linaro.org> -* -* This program is free software; you can redistribute it and/or modify it -* under the terms of the GNU General Public License as published by the -* Free Software Foundation; either version 2 of the License, or (at your -* option) any later version. */ &pmu { diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index f59764008b9c..e6a41e1b27fd 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -6,9 +6,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "brcm,bcm63138"; model = "Broadcom BCM63138 DSL SoC"; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index c859aa6f358c..504a63236a5e 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -1,8 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 934f07adfe3c..3d13e46c6949 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -39,6 +39,7 @@ compatible = "brcm,bcm94708", "brcm,bcm4708"; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; }; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index 31e4dd098776..5017b7b259cb 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -39,6 +39,7 @@ compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708"; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; }; diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts index ef263412fea5..4991700ae6b0 100644 --- a/arch/arm/boot/dts/bcm947189acdbmr.dts +++ b/arch/arm/boot/dts/bcm947189acdbmr.dts @@ -18,6 +18,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 17f63c7a0437..250a1d6f2d05 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -40,6 +40,7 @@ compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; memory { + device_type = "memory"; reg = <0x00000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts index 11b0f5ed99e6..9140be7ec053 100644 --- a/arch/arm/boot/dts/bcm953012hr.dts +++ b/arch/arm/boot/dts/bcm953012hr.dts @@ -46,6 +46,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; }; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index e798055d6989..52c4c6c9d3f1 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -44,6 +44,7 @@ }; memory { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; }; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index 8dca97eeaf57..29525686e51a 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x0 0x08000000>; }; diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi index 4af1adfee788..f5e6216718d8 100644 --- a/arch/arm/boot/dts/compulab-sb-som.dtsi +++ b/arch/arm/boot/dts/compulab-sb-som.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi index ce7fca76b0d6..97e616f7b841 100644 --- a/arch/arm/boot/dts/cros-adc-thermistors.dtsi +++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Thermistor dts fragment for devices that use Thermistors as * children of the IIO based ADC. @@ -6,10 +7,6 @@ * Exynos5800 based Peach PI. * * Copyright (c) 2014 Samsung Electronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &adc { diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi index c0451051777e..4a0c1037fbc0 100644 --- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi +++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Keyboard dts fragment for devices that use cros-ec-keyboard * * Copyright (c) 2014 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi index a5a23c376418..d2e8f36f8c60 100644 --- a/arch/arm/boot/dts/cx92755.dtsi +++ b/arch/arm/boot/dts/cx92755.dtsi @@ -44,9 +44,9 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "cnxt,cx92755"; interrupt-parent = <&intc>; diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts index 0102ffc5aa53..d4a5237cee0a 100644 --- a/arch/arm/boot/dts/da850-enbw-cmc.dts +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Device Tree for AM1808 EnBW CMC board * * Copyright 2012 DENX Software Engineering GmbH * Heiko Schocher <hs@denx.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ /dts-v1/; #include "da850.dtsi" diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index f04bc3e15332..f2d2b872333e 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree for DA850 EVM board * * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation, version 2. */ /dts-v1/; #include "da850.dtsi" diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 3a2fa6e035a3..2fd2a6838dab 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2016 BayLibre, Inc. - * - * Licensed under GPLv2. */ /dts-v1/; #include "da850.dtsi" @@ -74,12 +73,16 @@ simple-audio-card,name = "DA850-OMAPL138 LCDK"; simple-audio-card,widgets = "Line", "Line In", - "Line", "Line Out"; + "Line", "Line Out", + "Microphone", "Mic Jack"; simple-audio-card,routing = "LINE1L", "Line In", "LINE1R", "Line In", "Line Out", "LLOUT", - "Line Out", "RLOUT"; + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias"; simple-audio-card,format = "dsp_b"; simple-audio-card,bitclock-master = <&link0_codec>; simple-audio-card,frame-master = <&link0_codec>; @@ -250,6 +253,8 @@ #sound-dai-cells = <0>; compatible = "ti,tlv320aic3106"; reg = <0x18>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ status = "okay"; /* Regulators */ diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index 66fcadf0ba91..09c3666def66 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device tree for LEGO MINDSTORMS EV3 * * Copyright (C) 2017 David Lechner <david@lechnology.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation, version 2. */ /dts-v1/; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 559659b399d0..e6e78b88cacb 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -1,11 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 DENX Software Engineering GmbH * Heiko Schocher <hs@denx.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index 2d201719ba69..3931fb068ff0 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; #include "dm814x.dtsi" diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 63301bcacf19..9e43d5ec0bb2 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; #include "dm814x.dtsi" diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi index f80525a290bb..e5e4d0affefa 100644 --- a/arch/arm/boot/dts/dm814x-clocks.dtsi +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only &pllss { /* diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 601c57afd4fe..95de9f214c14 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -222,6 +222,30 @@ #interrupt-cells = <2>; }; + gpio3: gpio@1ac000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + ti,gpio-always-on; + reg = <0x1ac000 0x2000>; + interrupts = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@1ae000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + ti,gpio-always-on; + reg = <0x1ae000 0x2000>; + interrupts = <62>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + i2c2: i2c@2a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; @@ -240,10 +264,48 @@ ti,spi-num-cs = <4>; ti,hwmods = "mcspi1"; dmas = <&edma 16 0 &edma 17 0 - &edma 18 0 &edma 19 0>; + &edma 18 0 &edma 19 0 + &edma 20 0 &edma 21 0 + &edma 22 0 &edma 23 0>; + + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + + mcspi2: spi@1a0000 { + compatible = "ti,omap4-mcspi"; + reg = <0x1a0000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <125>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi2"; + dmas = <&edma 42 0 &edma 43 0 + &edma 44 0 &edma 45 0>; dma-names = "tx0", "rx0", "tx1", "rx1"; }; + /* Board must configure dmas with edma_xbar for EDMA */ + mcspi3: spi@1a2000 { + compatible = "ti,omap4-mcspi"; + reg = <0x1a2000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <126>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi3"; + }; + + mcspi4: spi@1a4000 { + compatible = "ti,omap4-mcspi"; + reg = <0x1a4000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <127>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi4"; + }; + timer1: timer@2e000 { compatible = "ti,dm814-timer"; reg = <0x2e000 0x2000>; @@ -343,6 +405,12 @@ #size-cells = <1>; ranges = <0 0 0x800>; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,dm814-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <1>; + }; + scm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; @@ -549,17 +617,14 @@ cpsw_emac0: slave@4a100200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; + }; cpsw_emac1: slave@4a100300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; - }; - - phy_sel: cpsw-phy-sel@48140650 { - compatible = "ti,am3352-cpsw-phy-sel"; - reg= <0x48140650 0x4>; - reg-names = "gmii-sel"; + phys = <&phy_gmii_sel 2>; }; }; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 1d030d567307..cf05d532db65 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; #include "dm816x.dtsi" diff --git a/arch/arm/boot/dts/dm816x-clocks.dtsi b/arch/arm/boot/dts/dm816x-clocks.dtsi index 1efd4e23e50d..338449b32a18 100644 --- a/arch/arm/boot/dts/dm816x-clocks.dtsi +++ b/arch/arm/boot/dts/dm816x-clocks.dtsi @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only &scrm { main_fapll: main_fapll { diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 250ad0535e8c..2e8a3977219f 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -1,12 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -/include/ "skeleton.dtsi" - #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; interrupt-parent = <&intc>; diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/dra62x-clocks.dtsi index 0e49741747ef..11d1241b0e13 100644 --- a/arch/arm/boot/dts/dra62x-clocks.dtsi +++ b/arch/arm/boot/dts/dra62x-clocks.dtsi @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only #include "dm814x-clocks.dtsi" diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index 906aedde045d..861ab90a3f3a 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; #include "dra62x.dtsi" diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 0d6f8647cc91..82eeba8faef1 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index cc079064a23b..714e971b912a 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index bb45cb7fc3b6..23faedec08ab 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -77,18 +77,18 @@ }; }; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,dra7xx-phy-gmii-sel"; + reg = <0x554 0x4>; + #phy-cells = <1>; + }; + scm_conf_clocks: clocks { #address-cells = <1>; #size-cells = <0>; }; }; - phy_sel: cpsw-phy-sel@554 { - compatible = "ti,dra7xx-cpsw-phy-sel"; - reg= <0x554 0x4>; - reg-names = "gmii-sel"; - }; - dra7_pmx_core: pinmux@1400 { compatible = "ti,dra7-padconf", "pinctrl-single"; @@ -2499,7 +2499,7 @@ ranges = <0x0 0x3a000 0x1000>; }; - target-module@3c000 { /* 0x4843c000, ap 23 08.0 */ + atl_tm: target-module@3c000 { /* 0x4843c000, ap 23 08.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x3c000 0x4>; reg-names = "rev"; @@ -3099,7 +3099,6 @@ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; ranges = <0 0 0x4000>; syscon = <&scm_conf>; - cpsw-phy-sel = <&phy_sel>; status = "disabled"; davinci_mdio: mdio@1000 { @@ -3114,11 +3113,13 @@ cpsw_emac0: slave@200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; }; cpsw_emac1: slave@300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2>; }; }; }; @@ -3542,7 +3543,7 @@ }; }; - target-module@38000 { /* 0x48838000, ap 29 12.0 */ + rtctarget: target-module@38000 { /* 0x48838000, ap 29 12.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; ti,hwmods = "rtcss"; reg = <0x38074 0x4>, @@ -4098,7 +4099,7 @@ }; }; - target-module@100000 { /* 0x48900000, ap 85 04.0 */ + usb3_tm: target-module@100000 { /* 0x48900000, ap 85 04.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "usb_otg_ss3"; reg = <0x100000 0x4>, @@ -4147,7 +4148,7 @@ }; }; - target-module@140000 { /* 0x48940000, ap 75 3c.0 */ + usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "usb_otg_ss4"; reg = <0x140000 0x4>, @@ -4449,8 +4450,6 @@ timer12: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER12_CLKCTRL 24>; - clock-names = "fck"; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; ti,timer-alwon; ti,timer-secure; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 2bc9add8b7a5..953f0ffce2a9 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1,9 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. * Based on "omap4.dtsi" */ @@ -193,6 +191,7 @@ ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; + ti,syscon-lane-sel = <&scm_conf_pcie 0x18>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie1_intc 1>, <0 0 0 2 &pcie1_intc 2>, @@ -218,6 +217,7 @@ phys = <&pcie1_phy>; phy-names = "pcie-phy0"; ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; + ti,syscon-lane-sel = <&scm_conf_pcie 0x18>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 82cc7ec37af0..fabeb7704753 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ -#include "dra72-evm-common.dtsi" +#include "dra71x.dtsi" #include "dra7-mmc-iodelay.dtsi" #include "dra72x-mmc-iodelay.dtsi" #include <dt-bindings/net/ti-dp83867.h> diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/dra71x.dtsi new file mode 100644 index 000000000000..695a08ed0360 --- /dev/null +++ b/arch/arm/boot/dts/dra71x.dtsi @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "dra72-evm-common.dtsi" + +&rtctarget { + status = "disabled"; +}; + +&usb4_tm { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index be65f3bc59d1..8641a3d7d8ad 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index fafc2a4d7bb9..2bb2e8be6276 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "dra72-evm-common.dtsi" #include "dra72x-mmc-iodelay.dtsi" diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi index 47bb90f41f3f..5ff9c43ef30b 100644 --- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi +++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 154b0a0ceb18..9adb77585ef1 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "dra72-evm-common.dtsi" #include "dra72x-mmc-iodelay.dtsi" diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index 89831552cd86..f5762709c853 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -1,9 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. * Based on "omap4.dtsi" */ @@ -62,3 +60,7 @@ &pcie2_rc { compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie"; }; + +&usb4_tm { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 8294a607fec8..d1b5b76bc5a8 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -1,9 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. * Based on "omap4.dtsi" */ diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 8a57895fd8f3..1fb6f13fb5e2 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi index baba7b00eca7..fdca48186916 100644 --- a/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi +++ b/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi @@ -22,7 +22,7 @@ * * Datamanual Revisions: * - * DRA76x Silicon Revision 1.0: SPRS993A, Revised July 2017 + * DRA76x Silicon Revision 1.0: SPRS993E, Revised December 2018 * */ @@ -169,25 +169,25 @@ /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */ mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf { pinctrl-pin-array = < - 0x190 A_DELAY_PS(384) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ - 0x194 A_DELAY_PS(0) G_DELAY_PS(174) /* CFG_GPMC_A19_OUT */ - 0x1a8 A_DELAY_PS(410) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ - 0x1ac A_DELAY_PS(85) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ - 0x1b4 A_DELAY_PS(468) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ - 0x1b8 A_DELAY_PS(139) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ - 0x1c0 A_DELAY_PS(676) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ - 0x1c4 A_DELAY_PS(69) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ - 0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154) /* CFG_GPMC_A23_OUT */ - 0x1d8 A_DELAY_PS(640) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ - 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ - 0x1e4 A_DELAY_PS(356) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ - 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ - 0x1f0 A_DELAY_PS(579) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ - 0x1f4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ - 0x1fc A_DELAY_PS(435) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ - 0x200 A_DELAY_PS(36) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ - 0x364 A_DELAY_PS(759) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ - 0x368 A_DELAY_PS(72) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + 0x190 A_DELAY_PS(384) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(350) G_DELAY_PS(174) /* CFG_GPMC_A19_OUT */ + 0x1a8 A_DELAY_PS(410) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(335) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b4 A_DELAY_PS(468) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(339) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c0 A_DELAY_PS(676) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(219) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154) /* CFG_GPMC_A23_OUT */ + 0x1d8 A_DELAY_PS(640) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(150) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e4 A_DELAY_PS(356) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(150) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f0 A_DELAY_PS(579) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1fc A_DELAY_PS(435) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(236) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x364 A_DELAY_PS(759) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(372) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ >; }; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index 9ee45aa365d8..cdcba3f561c4 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "dra74x.dtsi" @@ -81,3 +78,11 @@ reg = <0x3fc>; }; }; + +&rtctarget { + status = "disabled"; +}; + +&usb4_tm { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index bb52c6f0e90e..93e1eb83bed9 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for DRA7xx clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &cm_core_aon_clocks { atl_clkin0_ck: atl_clkin0_ck { diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts index c15e7e0c7e08..5651ae6dc969 100644 --- a/arch/arm/boot/dts/ecx-2000.dts +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2011-2012 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ /dts-v1/; diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi index b90045a8f8e3..66ee1d34f72b 100644 --- a/arch/arm/boot/dts/ecx-common.dtsi +++ b/arch/arm/boot/dts/ecx-common.dtsi @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2011-2012 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ / { diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 1bb8e5c9d029..abfff54d6de5 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -25,7 +25,7 @@ }; chosen { - bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial1:115200n8"; }; diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi index aaf1261d2ee4..365931f8b48d 100644 --- a/arch/arm/boot/dts/ep7209.dtsi +++ b/arch/arm/boot/dts/ep7209.dtsi @@ -1,16 +1,12 @@ -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - */ +// SPDX-License-Identifier: GPL-2.0-or-later /dts-v1/; -#include "skeleton.dtsi" - #include <dt-bindings/clock/clps711x-clock.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Cirrus Logic EP7209"; compatible = "cirrus,ep7209"; diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts index bc9d5b697452..a0c270f63fee 100644 --- a/arch/arm/boot/dts/ep7211-edb7211.dts +++ b/arch/arm/boot/dts/ep7211-edb7211.dts @@ -1,8 +1,4 @@ -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - */ +// SPDX-License-Identifier: GPL-2.0-or-later #include "ep7211.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -12,6 +8,7 @@ compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209"; memory { + device_type = "memory"; reg = <0xc0000000 0x02000000>; }; diff --git a/arch/arm/boot/dts/ep7211.dtsi b/arch/arm/boot/dts/ep7211.dtsi index e438f6db0673..32a4e1237145 100644 --- a/arch/arm/boot/dts/ep7211.dtsi +++ b/arch/arm/boot/dts/ep7211.dtsi @@ -1,8 +1,4 @@ -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - */ +// SPDX-License-Identifier: GPL-2.0-or-later #include "ep7209.dtsi" diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index b554f85add41..052a52f947ce 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * ethernut5.dts - Device Tree file for Ethernut 5 board * * Copyright (C) 2012 egnite GmbH <info@egnite.de> - * - * Licensed under GPLv2. */ /dts-v1/; #include "at91sam9xe.dtsi" diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts index 20a4481b6e12..6d519d02d190 100644 --- a/arch/arm/boot/dts/evk-pro3.dts +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3 * * Copyright (C) 2012 Telit, * 2012 Fabio Porcedda <fabio.porcedda@gmail.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 608d17454179..8ce3a7786b19 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -97,42 +97,46 @@ }; }; - soc: soc { - compatible = "simple-bus"; + fixed-rate-clocks { #address-cells = <1>; - #size-cells = <1>; - ranges; - - fixed-rate-clocks { - #address-cells = <1>; - #size-cells = <0>; + #size-cells = <0>; - xusbxti: clock@0 { - compatible = "fixed-clock"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xusbxti"; - }; + xusbxti: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xusbxti"; + }; - xxti: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xxti"; - }; + xxti: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xxti"; + }; - xtcxo: clock@2 { - compatible = "fixed-clock"; - reg = <2>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xtcxo"; - }; + xtcxo: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xtcxo"; }; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; sysram@2020000 { compatible = "mmio-sram"; @@ -168,6 +172,9 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + clock-names = "clkout8"; + clocks = <&cmu CLK_FIN_PLL>; + #clock-cells = <1>; }; mipi_phy: video-phy { @@ -670,12 +677,6 @@ status = "disabled"; }; - pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - }; - ppmu_dmc0: ppmu_dmc0@106a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106a0000 0x2000>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 6085e92ac2d7..36ccf227434d 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -51,6 +51,12 @@ serial3 = &serial_3; }; + pmu: pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&combiner>; + interrupts = <2 2>, <3 2>; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; @@ -169,12 +175,6 @@ reg = <0x10440000 0x1000>; }; - pmu: pmu { - compatible = "arm,cortex-a9-pmu"; - interrupt-parent = <&combiner>; - interrupts = <2 2>, <3 2>; - }; - sys_reg: syscon@10010000 { compatible = "samsung,exynos4-sysreg", "syscon"; reg = <0x10010000 0x400>; @@ -675,7 +675,7 @@ status = "disabled"; }; - amba { + amba: amba { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index dd9ec05eb0f7..36b1edea254a 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -30,8 +30,8 @@ }; chosen { - bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; - stdout-path = &serial_2; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; + stdout-path = "serial2:115200n8"; }; mmc_reg: voltage-regulator { diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 7a3e621edede..77fc11e593ad 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -26,8 +26,8 @@ }; chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; - stdout-path = &serial_1; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; + stdout-path = "serial1:115200n8"; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 8dbc47d627a5..6882480dbaf7 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -26,8 +26,8 @@ }; chosen { - bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; - stdout-path = &serial_2; + bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + stdout-path = "serial2:115200n8"; }; regulators { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 5c3d98654f13..bf092e97e14f 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -24,8 +24,8 @@ }; chosen { - bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; - stdout-path = &serial_2; + bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; + stdout-path = "serial2:115200n8"; }; @@ -177,6 +177,20 @@ }; }; +&amba { + mdma0: mdma@12840000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12840000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + power-domains = <&pd_lcd0>; + }; +}; + &camera { status = "okay"; @@ -491,7 +505,8 @@ }; &mdma1 { - reg = <0x12840000 0x1000>; + /* Use the secure mdma0 */ + status = "disabled"; }; &mixer { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 3a9eb1e91c45..08d3a0a7b4eb 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -49,7 +49,7 @@ }; emmc_pwrseq: pwrseq { - pinctrl-0 = <&sd1_cd>; + pinctrl-0 = <&emmc_rstn>; pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>; @@ -165,12 +165,6 @@ cpu0-supply = <&buck2_reg>; }; -/* RSTN signal for eMMC */ -&sd1_cd { - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; -}; - &pinctrl_1 { gpio_power_key: power_key { samsung,pins = "gpx1-3"; @@ -188,6 +182,11 @@ samsung,pins = "gpx3-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; }; + + emmc_rstn: emmc-rstn { + samsung,pins = "gpk1-2"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; }; &ehci { @@ -390,7 +389,6 @@ regulator-name = "LDO20_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-boot-on; }; ldo21_reg: LDO21 { diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 2bdf899df436..96d99887bceb 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -34,8 +34,6 @@ fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 10000 0>; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; cooling-levels = <0 102 170 230>; }; @@ -66,6 +64,11 @@ }; }; +&adc { + vdd-supply = <&ldo10_reg>; + /* Nothing connected to ADC inputs, keep it disabled */ +}; + /* Supply for LAN9730/SMSC95xx */ &buck8_reg { regulator-name = "BUCK8_P3V3"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 348556fcdd9d..a2251581f6b6 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -53,7 +53,7 @@ regulator-name = "p3v3_en"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpa1 1 GPIO_ACTIVE_LOW>; + gpio = <&gpa1 1 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 346f71932457..698de4345d16 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -25,8 +25,7 @@ }; chosen { - bootargs ="console=ttySAC2,115200"; - stdout-path = &serial_2; + stdout-path = "serial2:115200n8"; }; firmware@203f000 { diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index 5c5c2887c14f..e70fb6e601f0 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -23,8 +23,8 @@ }; chosen { - bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; - stdout-path = &serial_1; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; + stdout-path = "serial1:115200n8"; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 327ee980d3a5..aac533933c61 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -22,6 +22,7 @@ }; chosen { - bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + stdout-path = "serial2:115200n8"; }; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 26ad6ab3c6af..e5c041ec0756 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -274,7 +274,7 @@ }; adc: adc@126c0000 { - compatible = "samsung,exynos-adc-v1"; + compatible = "samsung,exynos4212-adc"; reg = <0x126C0000 0x100>; interrupt-parent = <&combiner>; interrupts = <10 3>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 2ca9319f48f2..dc6fa6fe83f1 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -23,7 +23,7 @@ }; chosen { - bootargs = "console=ttySAC2,115200"; + stdout-path = "serial2:115200n8"; }; gpio_keys { @@ -100,7 +100,7 @@ regulator-name = "VDD_33ON_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 GPIO_ACTIVE_LOW>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index d5e66189ed2a..6dc96948a9cc 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -24,7 +24,8 @@ }; chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; + stdout-path = "serial2:115200n8"; }; vdd: fixed-regulator-vdd { diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 80986b97dfe5..d5e0392b409e 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -157,6 +157,12 @@ }; }; + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupt-parent = <&combiner>; + interrupts = <1 2>, <22 4>; + }; + soc: soc { sysram@2020000 { compatible = "mmio-sram"; @@ -227,20 +233,6 @@ power-domains = <&pd_mau>; }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - /* - * Unfortunately we need this since some versions - * of U-Boot on Exynos don't set the CNTFRQ register, - * so we need the value from DT. - */ - clock-frequency = <24000000>; - }; - mct@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; @@ -265,12 +257,6 @@ }; }; - pmu { - compatible = "arm,cortex-a15-pmu"; - interrupt-parent = <&combiner>; - interrupts = <1 2>, <22 4>; - }; - pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos5250-pinctrl"; reg = <0x11400000 0x1000>; @@ -1097,6 +1083,20 @@ }; }; }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + /* + * Unfortunately we need this since some versions + * of U-Boot on Exynos don't set the CNTFRQ register, + * so we need the value from DT. + */ + clock-frequency = <24000000>; + }; }; &dp { diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi index b1edb20b789e..17e2f3e0d71e 100644 --- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi @@ -153,6 +153,14 @@ #gpio-cells = <2>; interrupt-controller; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; @@ -161,6 +169,14 @@ #gpio-cells = <2>; interrupt-controller; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index fa19c59b2fb6..36a2b77eeb9d 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "console=ttySAC2,115200"; + stdout-path = "serial2:115200n8"; }; fin_pll: xxti { diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 55167850619c..3581b57fbbf7 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -17,6 +17,10 @@ #size-cells = <1>; aliases { + i2c0 = &hsi2c_0; + i2c1 = &hsi2c_1; + i2c2 = &hsi2c_2; + i2c3 = &hsi2c_3; pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; @@ -223,7 +227,7 @@ wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -288,6 +292,14 @@ #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>; clock-names = "biu", "ciu"; + assigned-clocks = + <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>, + <&clock_top TOP_SCLK_MMC0>; + assigned-clock-parents = + <&clock_top TOP_MOUT_BUSTOP_PLL_USER>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>; + assigned-clock-rates = <0>, <0>, <800000000>; fifo-depth = <64>; status = "disabled"; }; @@ -300,6 +312,14 @@ #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>; clock-names = "biu", "ciu"; + assigned-clocks = + <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>, + <&clock_top TOP_SCLK_MMC1>; + assigned-clock-parents = + <&clock_top TOP_MOUT_BUSTOP_PLL_USER>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>; + assigned-clock-rates = <0>, <0>, <800000000>; fifo-depth = <64>; status = "disabled"; }; @@ -312,9 +332,69 @@ #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>; clock-names = "biu", "ciu"; + assigned-clocks = + <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>, + <&clock_top TOP_SCLK_MMC2>; + assigned-clock-parents = + <&clock_top TOP_MOUT_BUSTOP_PLL_USER>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>; + assigned-clock-rates = <0>, <0>, <800000000>; fifo-depth = <64>; status = "disabled"; }; + + hsi2c_0: hsi2c@12da0000 { + compatible = "samsung,exynos5260-hsi2c"; + reg = <0x12DA0000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_hs_bus>; + clocks = <&clock_peri PERI_CLK_HSIC0>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_1: hsi2c@12db0000 { + compatible = "samsung,exynos5260-hsi2c"; + reg = <0x12DB0000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_hs_bus>; + clocks = <&clock_peri PERI_CLK_HSIC1>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_2: hsi2c@12dc0000 { + compatible = "samsung,exynos5260-hsi2c"; + reg = <0x12DC0000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_hs_bus>; + clocks = <&clock_peri PERI_CLK_HSIC2>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_3: hsi2c@12dd0000 { + compatible = "samsung,exynos5260-hsi2c"; + reg = <0x12DD0000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_hs_bus>; + clocks = <&clock_peri PERI_CLK_HSIC3>; + clock-names = "hsi2c"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 434a7591ff63..8f9e08f940ab 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -38,8 +38,6 @@ fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 20972 0>; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; cooling-levels = <0 130 170 230>; }; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 8fc8c841d34b..dffa5e3ed90c 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "console=ttySAC2,115200"; + stdout-path = "serial2:115200n8"; }; fin_pll: xxti { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 3447160e1fbf..dbf0306896f6 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -24,7 +24,7 @@ }; chosen { - bootargs = "console=ttySAC3,115200"; + stdout-path = "serial3:115200n8"; }; firmware@2073000 { @@ -51,6 +51,15 @@ }; }; +&adc { + vdd-supply = <&ldo4_reg>; + status = "okay"; +}; + +&cci { + status = "disabled"; +}; + &cpu0 { cpu-supply = <&buck2_reg>; }; @@ -59,12 +68,268 @@ cpu-supply = <&buck6_reg>; }; -&usbdrd_dwc3_1 { - dr_mode = "host"; +&cpu0_thermal { + trips { + cpu0_alert0: cpu-alert-0 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "passive"; + }; + cpu0_alert1: cpu-alert-1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu0_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu0_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* + * Reduce the CPU speed by 2 steps, down to: 1600 MHz + * and 1100 MHz. + */ + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; + }; + + /* + * Reduce the CPU speed down to 1200 MHz big (6 steps) + * and 800 MHz LITTLE (5 steps). + */ + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&cpu0 3 6>, + <&cpu1 3 6>, + <&cpu2 3 6>, + <&cpu3 3 6>, + <&cpu4 3 5>, + <&cpu5 3 5>, + <&cpu6 3 5>, + <&cpu7 3 5>; + }; + + /* + * Reduce the CPU speed as much as possible, down to 700 MHz + * big (11 steps) and 600 MHz LITTLE (7 steps). + */ + map2 { + trip = <&cpu0_alert2>; + cooling-device = <&cpu0 6 11>, + <&cpu1 6 11>, + <&cpu2 6 11>, + <&cpu3 6 11>, + <&cpu4 5 7>, + <&cpu5 5 7>, + <&cpu6 5 7>, + <&cpu7 5 7>; + }; + }; }; -&cci { - status = "disabled"; +&cpu1_thermal { + trips { + cpu1_alert0: cpu-alert-0 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "passive"; + }; + cpu1_alert1: cpu-alert-1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu1_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu1_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; + }; + + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&cpu0 3 6>, + <&cpu1 3 6>, + <&cpu2 3 6>, + <&cpu3 3 6>, + <&cpu4 3 5>, + <&cpu5 3 5>, + <&cpu6 3 5>, + <&cpu7 3 5>; + }; + + map2 { + trip = <&cpu1_alert2>; + cooling-device = <&cpu0 6 11>, + <&cpu1 6 11>, + <&cpu2 6 11>, + <&cpu3 6 11>, + <&cpu4 5 7>, + <&cpu5 5 7>, + <&cpu6 5 7>, + <&cpu7 5 7>; + }; + }; +}; + +&cpu2_thermal { + trips { + cpu2_alert0: cpu-alert-0 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "passive"; + }; + cpu2_alert1: cpu-alert-1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu2_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu2_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; + }; + + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&cpu0 3 6>, + <&cpu1 3 6>, + <&cpu2 3 6>, + <&cpu3 3 6>, + <&cpu4 3 5>, + <&cpu5 3 5>, + <&cpu6 3 5>, + <&cpu7 3 5>; + }; + + map2 { + trip = <&cpu2_alert2>; + cooling-device = <&cpu0 6 11>, + <&cpu1 6 11>, + <&cpu2 6 11>, + <&cpu3 6 11>, + <&cpu4 6 7>, + <&cpu5 6 7>, + <&cpu6 6 7>, + <&cpu7 6 7>; + }; + }; +}; + +&cpu3_thermal { + trips { + cpu3_alert0: cpu-alert-0 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "passive"; + }; + cpu3_alert1: cpu-alert-1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu3_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu3_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; + }; + + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&cpu0 3 6>, + <&cpu1 3 6>, + <&cpu2 3 6>, + <&cpu3 3 6>, + <&cpu4 3 5>, + <&cpu5 3 5>, + <&cpu6 3 5>, + <&cpu7 3 5>; + }; + + map2 { + trip = <&cpu3_alert2>; + cooling-device = <&cpu0 6 11>, + <&cpu1 6 11>, + <&cpu2 6 11>, + <&cpu3 6 11>, + <&cpu4 5 7>, + <&cpu5 5 7>, + <&cpu6 5 7>, + <&cpu7 5 7>; + }; + }; }; &hdmi { @@ -107,12 +372,19 @@ regulator-name = "PVDD_APIO_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; ldo3_reg: LDO3 { regulator-name = "PVDD_APIO_MMCON_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + /* + * Must be always on, even though there is + * a consumer (mmc_0). Otherwise the board + * does not reboot with vendor U-Boot + * (Linaro for Arndale Octa, v2012.07). + */ regulator-always-on; }; @@ -145,6 +417,7 @@ regulator-name = "PVDD_ABB_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; ldo9_reg: LDO9 { @@ -176,10 +449,17 @@ ldo13_reg: LDO13 { regulator-name = "PVDD_APIO_MMCOFF_2V8"; - regulator-min-microvolt = <2800000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; }; + ldo14_reg: LDO14 { + /* Unused */ + regulator-name = "PVDD_LDO14"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo15_reg: LDO15 { regulator-name = "PVDD_PERI_2V8"; regulator-min-microvolt = <3300000>; @@ -192,6 +472,13 @@ regulator-max-microvolt = <2200000>; }; + ldo17_reg: LDO17 { + /* Unused */ + regulator-name = "PVDD_LDO17"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo18_reg: LDO18 { regulator-name = "PVDD_EMMC_1V8"; regulator-min-microvolt = <1800000>; @@ -216,10 +503,17 @@ regulator-max-microvolt = <1800000>; }; + ldo22_reg: LDO22 { + /* Unused */ + regulator-name = "PVDD_LDO22"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2375000>; + }; + ldo23_reg: LDO23 { regulator-name = "PVDD_MIFS_1V1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; regulator-always-on; }; @@ -229,6 +523,13 @@ regulator-max-microvolt = <2800000>; }; + ldo25_reg: LDO25 { + /* Unused */ + regulator-name = "PVDD_LDO25"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo26_reg: LDO26 { regulator-name = "PVDD_CAM0_AF_2V8"; regulator-min-microvolt = <3000000>; @@ -237,8 +538,8 @@ ldo27_reg: LDO27 { regulator-name = "PVDD_G3DS_1V0"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; }; ldo28_reg: LDO28 { @@ -253,6 +554,13 @@ regulator-max-microvolt = <1800000>; }; + ldo30_reg: LDO30 { + /* Unused */ + regulator-name = "PVDD_LDO30"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo31_reg: LDO31 { regulator-name = "PVDD_PERI_1V8"; regulator-min-microvolt = <1800000>; @@ -271,12 +579,33 @@ regulator-max-microvolt = <1800000>; }; + ldo34_reg: LDO34 { + /* Unused */ + regulator-name = "PVDD_LDO34"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo35_reg: LDO35 { regulator-name = "PVDD_CAM0_DVDD_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + ldo36_reg: LDO36 { + /* Unused */ + regulator-name = "PVDD_LDO36"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo37_reg: LDO37 { + /* Unused */ + regulator-name = "PVDD_LDO37"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo38_reg: LDO38 { regulator-name = "PVDD_CAM0_AVDD_2V8"; regulator-min-microvolt = <2800000>; @@ -364,7 +693,7 @@ &mmc_0 { status = "okay"; - broken-cd; + non-removable; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; @@ -372,22 +701,27 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; vmmc-supply = <&ldo10_reg>; + vqmmc-supply = <&ldo3_reg>; bus-width = <8>; cap-mmc-highspeed; + mmc-hs200-1_8v; }; &mmc_2 { status = "okay"; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; vmmc-supply = <&ldo19_reg>; vqmmc-supply = <&ldo13_reg>; bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; }; &pinctrl_0 { @@ -404,3 +738,7 @@ clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; clock-names = "rtc", "rtc_src"; }; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 3cf905047893..8240e5186972 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -21,7 +21,8 @@ }; chosen { - bootargs = "console=ttySAC2,115200 init=/linuxrc"; + bootargs = "init=/linuxrc"; + stdout-path = "serial2:115200n8"; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index aaff15880761..5fb2326875dc 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -5,7 +5,7 @@ * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file. + * SAMSUNG EXYNOS5420 SoC device nodes are listed in this file. * EXYNOS5420 based board files can include this file and provide * values for board specfic bindings. */ diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index bf09eab90f8a..25d95de15c9b 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -36,6 +36,11 @@ }; }; +&adc { + vdd-supply = <&ldo4_reg>; + status = "okay"; +}; + &bus_wcore { devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, <&nocp_mem1_0>, <&nocp_mem1_1>; @@ -468,7 +473,7 @@ buck8_reg: BUCK8 { regulator-name = "vdd_1.8v_ldo"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; regulator-always-on; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index e84544b220b9..c3c2d85267da 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -22,9 +22,12 @@ "Headphone Jack", "HPL", "Headphone Jack", "HPR", "Headphone Jack", "MICBIAS", - "IN1", "Headphone Jack", + "IN12", "Headphone Jack", "Speakers", "SPKL", - "Speakers", "SPKR"; + "Speakers", "SPKR", + "I2S Playback", "Mixer DAI TX", + "HiFi Playback", "Mixer DAI TX", + "Mixer DAI RX", "HiFi Capture"; assigned-clocks = <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, @@ -51,7 +54,7 @@ <196608000>; cpu { - sound-dai = <&i2s0 0>; + sound-dai = <&i2s0 0>, <&i2s0 1>; }; codec { sound-dai = <&hdmi>, <&max98090>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index b299e541cac0..93a48f2dda49 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -44,8 +44,6 @@ fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 20972 0>; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; cooling-levels = <0 130 170 230>; }; @@ -362,11 +360,6 @@ }; }; -&adc { - vdd-supply = <&ldo4_reg>; - status = "okay"; -}; - &hdmi { status = "okay"; ddc = <&i2c_2>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index 0db935f2b836..c19b5a51ca44 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -18,6 +18,14 @@ compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; }; +&arm_a7_pmu { + status = "disabled"; +}; + +&arm_a15_pmu { + status = "disabled"; +}; + &pwm { /* * PWM 0 -- fan diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts index 122174ea9e0a..892d389d6d09 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -33,6 +33,8 @@ compatible = "samsung,odroid-xu3-audio"; model = "Odroid-XU4"; + samsung,audio-routing = "I2S Playback", "Mixer DAI TX"; + assigned-clocks = <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, <&clock CLK_MOUT_USER_MAU_EPLL>, @@ -58,7 +60,7 @@ <196608000>; cpu { - sound-dai = <&i2s0 0>; + sound-dai = <&i2s0 0>, <&i2s0 1>; }; codec { diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index de26e5ee0d2d..ae866bcc30c4 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -25,27 +25,27 @@ usbdrdphy1 = &usbdrd_phy1; }; - soc: soc { - arm_a7_pmu: arm-a7-pmu { - compatible = "arm,cortex-a7-pmu"; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; + arm_a7_pmu: arm-a7-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; - arm_a15_pmu: arm-a15-pmu { - compatible = "arm,cortex-a15-pmu"; - interrupt-parent = <&combiner>; - interrupts = <1 2>, - <7 0>, - <16 6>, - <19 2>; - status = "disabled"; - }; + arm_a15_pmu: arm-a15-pmu { + compatible = "arm,cortex-a15-pmu"; + interrupt-parent = <&combiner>; + interrupts = <1 2>, + <7 0>, + <16 6>, + <19 2>; + status = "disabled"; + }; + soc: soc { sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x54000>; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index a7adbdc2f0c0..dbba33e5a06c 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3 * * Copyright (C) 2012 Telit, * 2012 Fabio Porcedda <fabio.porcedda@gmail.com> - * - * Licensed under GPLv2 or later. */ #include "at91sam9260.dtsi" diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index 592111c8d6fd..3613f05f8a80 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; + bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300"; stdout-path = "uart0:19200n8"; }; @@ -267,44 +267,50 @@ /* 32MB of flash */ reg = <0x30000000 0x02000000>; - /* - * This "RedBoot" is the Storlink derivative. - */ - partition@0 { - label = "RedBoot"; - reg = <0x00000000 0x00040000>; - read-only; - }; - /* - * This firmware image contains the kernel catenated - * with the squashfs root filesystem. For some reason - * this is called "upgrade" on the vendor system. - */ - partition@40000 { - label = "upgrade"; - reg = <0x00040000 0x01f40000>; - read-only; - }; - /* RGDB, Residental Gateway Database? */ - partition@1f80000 { - label = "rgdb"; - reg = <0x01f80000 0x00040000>; - read-only; - }; - /* - * This partition contains MAC addresses for WAN, - * WLAN and LAN, and the country code (for wireless - * I guess). - */ - partition@1fc0000 { - label = "nvram"; - reg = <0x01fc0000 0x00020000>; - read-only; - }; - partition@1fe0000 { - label = "LangPack"; - reg = <0x01fe0000 0x00020000>; - read-only; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * This "RedBoot" is the Storlink derivative. + */ + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + /* + * This firmware image contains the kernel catenated + * with the squashfs root filesystem. For some reason + * this is called "upgrade" on the vendor system. + */ + partition@40000 { + label = "upgrade"; + reg = <0x00040000 0x01f40000>; + read-only; + }; + /* RGDB, Residental Gateway Database? */ + partition@1f80000 { + label = "rgdb"; + reg = <0x01f80000 0x00040000>; + read-only; + }; + /* + * This partition contains MAC addresses for WAN, + * WLAN and LAN, and the country code (for wireless + * I guess). + */ + partition@1fc0000 { + label = "nvram"; + reg = <0x01fc0000 0x00020000>; + read-only; + }; + partition@1fe0000 { + label = "LangPack"; + reg = <0x01fe0000 0x00020000>; + read-only; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts index b12504e10f0b..360642a02a48 100644 --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts @@ -11,7 +11,7 @@ / { model = "D-Link DNS-313 1-Bay Network Storage Enclosure"; - compatible = "dlink,dir-313", "cortina,gemini"; + compatible = "dlink,dns-313", "cortina,gemini"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts index 6991ab694c9c..64f8ed126931 100644 --- a/arch/arm/boot/dts/hi3519-demb.dts +++ b/arch/arm/boot/dts/hi3519-demb.dts @@ -1,19 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (c) 2015 HiSilicon Technologies Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * */ /dts-v1/; diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi index 5729ecfcdc8b..410409a0ed66 100644 --- a/arch/arm/boot/dts/hi3519.dtsi +++ b/arch/arm/boot/dts/hi3519.dtsi @@ -1,19 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (c) 2015 HiSilicon Technologies Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * */ #include <dt-bindings/clock/hi3519-clock.h> diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts index a579fbf13b5f..8c703c3f2fe0 100644 --- a/arch/arm/boot/dts/hi3620-hi4511.dts +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012-2013 Linaro Ltd. * Author: Haojian Zhuang <haojian.zhuang@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index 541d70094544..9c207a690df5 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hisilicon Ltd. Hi3620 SoC * @@ -5,10 +6,6 @@ * Copyright (C) 2012-2013 Linaro Ltd. * * Author: Haojian Zhuang <haojian.zhuang@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <dt-bindings/clock/hi3620-clock.h> diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 50278715de76..f4e4dca6f7e7 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2011-2012 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ /dts-v1/; diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hip01-ca9x2.dts index eca5e42770fe..f05e74eacfe0 100644 --- a/arch/arm/boot/dts/hip01-ca9x2.dts +++ b/arch/arm/boot/dts/hip01-ca9x2.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hisilicon Ltd. HiP01 SoC * @@ -5,10 +6,6 @@ * Copyright (C) 2014 Huawei Ltd. * * Author: Wang Long <long.wanglong@huawei.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi index f7cf4f53e764..975d39828405 100644 --- a/arch/arm/boot/dts/hip01.dtsi +++ b/arch/arm/boot/dts/hip01.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hisilicon Ltd. HiP01 SoC * @@ -5,10 +6,6 @@ * Copyright (c) 2014 Huawei Ltd. * * Author: Wang Long <long.wanglong@huawei.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts index ca48641d0f48..9019e0d2ef60 100644 --- a/arch/arm/boot/dts/hip04-d01.dts +++ b/arch/arm/boot/dts/hip04-d01.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013-2014 Linaro Ltd. * Author: Haojian Zhuang <haojian.zhuang@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 0f917b272ff3..bf0cb55809f8 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hisilicon Ltd. HiP04 SoC * @@ -5,10 +6,6 @@ * Copyright (C) 2013-2014 Linaro Ltd. * * Author: Haojian Zhuang <haojian.zhuang@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts index d13af8437d10..d55e9cd3b12b 100644 --- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts +++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013-2014 Linaro Ltd. * Copyright (c) 2013-2014 Hisilicon Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index 50d3f8426da1..696e6982a688 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013-2014 Linaro Ltd. * Copyright (c) 2013-2014 Hisilicon Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <dt-bindings/clock/hix5hd2-clock.h> diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts index 119b19ba53b6..5833fb6f15d8 100644 --- a/arch/arm/boot/dts/imx1-ads.dts +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts index ee4b1b106b1a..77b21aa7a146 100644 --- a/arch/arm/boot/dts/imx1-apf9328.dts +++ b/arch/arm/boot/dts/imx1-apf9328.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/imx1-pinfunc.h index 22bec8b87680..050a1fc46a77 100644 --- a/arch/arm/boot/dts/imx1-pinfunc.h +++ b/arch/arm/boot/dts/imx1-pinfunc.h @@ -1,12 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifndef __DTS_IMX1_PINFUNC_H diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index e2bac4d8f507..4c9aafe00b5d 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Freescale Semiconductor, Inc. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts index df2a9e6486a4..da4b88f32eaa 100644 --- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi index e4d7da267532..0703f62d10d1 100644 --- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi +++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include "imx25.dtsi" diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts index 68d0834a2d1e..dbecd6d2cfc4 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include "imx25-eukrea-mbimxsd25-baseboard.dts" diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts index 8eee2f65fe00..ad2f7e879831 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include "imx25-eukrea-mbimxsd25-baseboard.dts" diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts index 447da6263169..d60d8f464ca9 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include "imx25-eukrea-mbimxsd25-baseboard.dts" diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index 6273a1f243ed..0fde90df2b54 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index f37e9a75a3ca..0950eb66d3d9 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Sascha Hauer, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index a4807062a90f..f4516ccf2c1a 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> * Based on imx35-pinfunc.h in the same directory Which is: * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX25_PINFUNC_H diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index f635d5c5029c..745d5d409952 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -1,15 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr> * Copyright 2012 Armadeus Systems <support@armadeus.com> * * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 5f84b598e0d0..087c6e237af0 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Armadeus Systems - <support@armadeus.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /* APF27Dev is a docking board for the APF27 SOM */ diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi index c85f9d01768a..74110bbcd9d4 100644 --- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi +++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts index 15145e7f9778..84fc8df4be7c 100644 --- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "imx27-eukrea-cpuimx27.dtsi" diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index bfd4946cf9fe..5e5e282ed30e 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Markus Pargmann, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "imx27-phytec-phycard-s-som.dtsi" diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi index b0b4f7c00246..52c95248e25d 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar * and Markus Pargmann, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index 2ed2d73b087e..5606f417e9e8 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -1,10 +1,5 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "imx27-phytec-phycore-som.dtsi" diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index 0935e1400e5d..3d10273177e9 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Sascha Hauer, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h index 597bb5f74dcc..1514d80a3112 100644 --- a/arch/arm/boot/dts/imx27-pinfunc.h +++ b/arch/arm/boot/dts/imx27-pinfunc.h @@ -1,12 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifndef __DTS_IMX27_PINFUNC_H diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 26ff5d419bfc..3652f5556b29 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -40,7 +40,7 @@ spi2 = &cspi3; }; - aitc: aitc-interrupt-controller@e0000000 { + aitc: aitc-interrupt-controller@10040000 { compatible = "fsl,imx27-aitc", "fsl,avic"; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index b6976fbec983..3ed2b328f7ef 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Armadeus Systems - <support@armadeus.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 8df5ec470376..1b253b47006c 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Armadeus Systems - <support@armadeus.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /* APF28Dev is a docking board for the APF28 SOM */ diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index d3e3622979c5..85aa1cc3ff66 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -1,16 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Free Electrons - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; #include "imx28.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Crystalfontz CFA-10036 Board"; @@ -96,7 +91,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ssd1306_cfa10036>; reg = <0x3c>; - reset-gpios = <&gpio2 7 0>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; solomon,height = <32>; solomon,width = <128>; solomon,page-offset = <0>; diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts index 3d13b321d27b..d3e9a731525b 100644 --- a/arch/arm/boot/dts/imx28-cfa10037.dts +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Free Electrons - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /* diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index f1c8315b3e01..a92b05ef390f 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Free Electrons - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /* diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index 6a34114bec29..d05c370dfc17 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Crystalfontz America, Inc. * Free Electrons - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /* diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index ba6495ca44d2..c1060bd5f17f 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Free Electrons - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /* diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index c6067915b238..2f7e479dbc74 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Crystalfontz America, Inc. * Copyright 2012 Free Electrons - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /* diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index 70c7bb4a5a0e..4465fd86785a 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Crystalfontz America, Inc. * Copyright 2013 Free Electrons - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /* diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts index 19957c2406e8..d451fa018d83 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts index 498213137385..bacb846f99e3 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts index d38d35b2a93d..0e8be5975709 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts index 38160fbd44b6..23fd3036404d 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index 7139c07ae19b..c666afb12445 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de> * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts index 28dab6d3a97c..29f8a3a245d4 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Eukréa Electromatique <eric@eukrea.com> * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /* diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts index 7c3d55277312..cd875ace168d 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Eukréa Electromatique <eric@eukrea.com> * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /* diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi index ff1328ce7d37..3280fddaaf0d 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Eukréa Electromatique <eric@eukrea.com> * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 298ad28caceb..0bac72d5351f 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2014 Marek Vasut <marex@denx.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "imx28.dtsi" diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index ece33103a517..91bd6deffee5 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2013 Marek Vasut <marex@denx.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 7d64301529c7..f3bddc5ada4b 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2012 Marek Vasut <marex@denx.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index 42c88a67912b..43be7a6a769b 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2012 Marek Vasut <marex@denx.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts index e3fd4112e642..097ec35c62d8 100644 --- a/arch/arm/boot/dts/imx28-ts4600.dts +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2016 Savoir-Faire Linux * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts index 9eb960cc02cc..d87eee3f9b3c 100644 --- a/arch/arm/boot/dts/imx31-bug.dts +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi index 5f8a47a9fcd4..17bd2a97609a 100644 --- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include "imx35.dtsi" diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index ae98d6759074..b1c11170ac25 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx35-pinfunc.h b/arch/arm/boot/dts/imx35-pinfunc.h index 4911f2c405fa..9d6cc9564b72 100644 --- a/arch/arm/boot/dts/imx35-pinfunc.h +++ b/arch/arm/boot/dts/imx35-pinfunc.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX35_PINFUNC_H diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 59cadeee23ed..9cbdc1a15cda 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -21,6 +21,12 @@ gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &esdhc1; + mmc1 = &esdhc2; + mmc2 = &esdhc3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts new file mode 100644 index 000000000000..a0eaf869b913 --- /dev/null +++ b/arch/arm/boot/dts/imx50-kobo-aura.dts @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2019 Jonathan Neuschäfer +// +// The Kobo Aura e-book reader, model N514. The mainboard is marked as E606F0B. + +/dts-v1/; +#include "imx50.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Kobo Aura (N514)"; + compatible = "kobo,aura", "fsl,imx50"; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + memory@70000000 { + device_type = "memory"; + reg = <0x70000000 0x10000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + on { + label = "kobo_aura:orange:on"; + gpios = <&gpio6 24 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + power { + label = "Power Button"; + gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + + hallsensor { + label = "Hallsensor"; + gpios = <&gpio5 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESERVED>; + linux,input-type = <EV_SW>; + }; + + frontlight { + label = "Frontlight"; + gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_DISPLAYTOGGLE>; + }; + }; + + sd2_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2_reset>; + reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + }; + + sd2_vmmc: gpio-regulator { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2_vmmc>; + regulator-name = "vmmc"; + states = <3300000 0>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-gpio = <&gpio4 12 GPIO_ACTIVE_LOW>; + startup-delay-us = <100000>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1>; + max-frequency = <50000000>; + bus-width = <4>; + cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; + disable-wp; + status = "okay"; + + /* External µSD card */ +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2>; + bus-width = <4>; + max-frequency = <50000000>; + disable-wp; + mmc-pwrseq = <&sd2_pwrseq>; + vmmc-supply = <&sd2_vmmc>; + status = "okay"; + + /* CyberTan WC121 SDIO WiFi (BCM43362) */ +}; + +&esdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd3>; + bus-width = <8>; + non-removable; + max-frequency = <50000000>; + disable-wp; + status = "okay"; + + /* Internal eMMC */ +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + /* TODO: ektf2132 touch controller at 0x15 */ +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + /* TODO: TPS65185 PMIC for E Ink at 0x68 */ +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + /* TODO: embedded controller at 0x43 */ +}; + +&iomuxc { + pinctrl_gpiokeys: gpiokeys { + fsl,pins = < + MX50_PAD_CSPI_MISO__GPIO4_10 0x0 + MX50_PAD_SD2_D7__GPIO5_15 0x0 + MX50_PAD_KEY_ROW0__GPIO4_1 0x0 + >; + }; + + pinctrl_i2c1: i2c1 { + fsl,pins = < + MX50_PAD_I2C1_SCL__I2C1_SCL 0x400001fd + MX50_PAD_I2C1_SDA__I2C1_SDA 0x400001fd + >; + }; + + pinctrl_i2c2: i2c2 { + fsl,pins = < + MX50_PAD_I2C2_SCL__I2C2_SCL 0x400001fd + MX50_PAD_I2C2_SDA__I2C2_SDA 0x400001fd + >; + }; + + pinctrl_i2c3: i2c3 { + fsl,pins = < + MX50_PAD_I2C3_SCL__I2C3_SCL 0x400001fd + MX50_PAD_I2C3_SDA__I2C3_SDA 0x400001fd + >; + }; + + pinctrl_leds: leds { + fsl,pins = < + MX50_PAD_PWM1__GPIO6_24 0x0 + >; + }; + + pinctrl_sd1: sd1 { + fsl,pins = < + MX50_PAD_SD1_CMD__ESDHC1_CMD 0x1e4 + MX50_PAD_SD1_CLK__ESDHC1_CLK 0xd4 + MX50_PAD_SD1_D0__ESDHC1_DAT0 0x1d4 + MX50_PAD_SD1_D1__ESDHC1_DAT1 0x1d4 + MX50_PAD_SD1_D2__ESDHC1_DAT2 0x1d4 + MX50_PAD_SD1_D3__ESDHC1_DAT3 0x1d4 + + MX50_PAD_SD2_CD__GPIO5_17 0x0 + >; + }; + + pinctrl_sd2: sd2 { + fsl,pins = < + MX50_PAD_SD2_CMD__ESDHC2_CMD 0x1e4 + MX50_PAD_SD2_CLK__ESDHC2_CLK 0xd4 + MX50_PAD_SD2_D0__ESDHC2_DAT0 0x1d4 + MX50_PAD_SD2_D1__ESDHC2_DAT1 0x1d4 + MX50_PAD_SD2_D2__ESDHC2_DAT2 0x1d4 + MX50_PAD_SD2_D3__ESDHC2_DAT3 0x1d4 + >; + }; + + pinctrl_sd2_reset: sd2-reset { + fsl,pins = < + MX50_PAD_ECSPI2_MOSI__GPIO4_17 0x0 + >; + }; + + pinctrl_sd2_vmmc: sd2-vmmc { + fsl,pins = < + MX50_PAD_ECSPI1_SCLK__GPIO4_12 0x0 + >; + }; + + pinctrl_sd3: sd3 { + fsl,pins = < + MX50_PAD_SD3_CMD__ESDHC3_CMD 0x1e4 + MX50_PAD_SD3_CLK__ESDHC3_CLK 0xd4 + MX50_PAD_SD3_D0__ESDHC3_DAT0 0x1d4 + MX50_PAD_SD3_D1__ESDHC3_DAT1 0x1d4 + MX50_PAD_SD3_D2__ESDHC3_DAT2 0x1d4 + MX50_PAD_SD3_D3__ESDHC3_DAT3 0x1d4 + MX50_PAD_SD3_D4__ESDHC3_DAT4 0x1d4 + MX50_PAD_SD3_D5__ESDHC3_DAT5 0x1d4 + MX50_PAD_SD3_D6__ESDHC3_DAT6 0x1d4 + MX50_PAD_SD3_D7__ESDHC3_DAT7 0x1d4 + >; + }; + + pinctrl_uart2: uart2 { + fsl,pins = < + MX50_PAD_UART2_TXD__UART2_TXD_MUX 0x1e4 + MX50_PAD_UART2_RXD__UART2_RXD_MUX 0x1e4 + >; + }; + + pinctrl_usbphy: usbphy { + fsl,pins = < + MX50_PAD_ECSPI2_SS0__GPIO4_19 0x0 + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi_wide"; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbphy>; + vbus-detect-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/imx50-pinfunc.h index 43863347362e..5e6b30247543 100644 --- a/arch/arm/boot/dts/imx50-pinfunc.h +++ b/arch/arm/boot/dts/imx50-pinfunc.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2013 Greg Ungerer <gerg@uclinux.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX50_PINFUNC_H diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index ee1e3e8bf4ec..0bfe7c91d0eb 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -26,11 +26,21 @@ gpio3 = &gpio4; gpio4 = &gpio5; gpio5 = &gpio6; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &esdhc1; + mmc1 = &esdhc2; + mmc2 = &esdhc3; + mmc3 = &esdhc4; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &cspi; }; cpus { @@ -76,6 +86,14 @@ }; }; + usbphy0: usbphy-0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; + status = "okay"; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -187,7 +205,8 @@ compatible = "fsl,imx50-usb", "fsl,imx27-usb"; reg = <0x53f80000 0x0200>; interrupts = <18>; - clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; + clocks = <&clks IMX5_CLK_USBOH3_GATE>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -411,7 +430,7 @@ reg = <0x63fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin"; diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts index 1eddf2908b3f..ba28ffe06fe2 100644 --- a/arch/arm/boot/dts/imx51-apf51.dts +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Armadeus Systems - <support@armadeus.com> * Copyright 2012 Laurent Cans <laurent.cans@gmail.com> @@ -5,13 +6,6 @@ * Based on mx51-babbage.dts * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index 3e1846a64d93..563c1aae8c0c 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Armadeus Systems - <support@armadeus.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /* APF51Dev is a docking board for the APF51 SOM */ diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts index 2967a748d859..aab8d6f137c3 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts +++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "imx51-digi-connectcore-som.dtsi" @@ -21,12 +15,28 @@ }; }; +&esdhc1 { + status = "okay"; +}; + &owire { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_owire>; status = "okay"; }; +&pmic { + fsl,mc13xxx-uses-rtc; + + regulators { + vcoincell_reg: vcoincell { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 82d8df097ef1..16addb3a2a1b 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; @@ -37,7 +31,6 @@ reg = <0>; interrupt-parent = <&gpio1>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - fsl,mc13xxx-uses-rtc; regulators { sw1_reg: sw1 { @@ -142,16 +135,17 @@ pwgt2spi_reg: pwgt2spi { regulator-always-on; }; - - vcoincell_reg: vcoincell { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; }; }; }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + max-frequency = <50000000>; + bus-width = <1>; +}; + &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; @@ -174,9 +168,12 @@ }; &i2c2 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; clock-frequency = <400000>; + scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; status = "okay"; mma7455l@1d { @@ -241,6 +238,14 @@ >; }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CLK__SD1_CLK 0x400021d5 + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x400020d5 + >; + }; + pinctrl_esdhc2: esdhc2grp { fsl,pins = < MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 @@ -282,6 +287,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX51_PAD_GPIO1_2__GPIO1_2 0x400001ed + MX51_PAD_GPIO1_3__GPIO1_3 0x400001ed + >; + }; + pinctrl_nfc: nfcgrp { fsl,pins = < MX51_PAD_NANDF_D0__NANDF_D0 0x80000000 diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi index 2e3125391bc4..c2a929ba8ceb 100644 --- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi +++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi @@ -1,19 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #include "imx51.dtsi" diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index e9e819f2b0b7..b6d931e96a8f 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -1,19 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx51-pinfunc.h b/arch/arm/boot/dts/imx51-pinfunc.h index 82eae3c8a3ce..910e0ec50ef3 100644 --- a/arch/arm/boot/dts/imx51-pinfunc.h +++ b/arch/arm/boot/dts/imx51-pinfunc.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX51_PINFUNC_H diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index a8220f08dcbf..3596060f52e7 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2017 Zodiac Inflight Innovations - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index a5ee25cedc10..0a4b9a5d9a9c 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -489,7 +489,7 @@ reg = <0x83fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 7d5a48250f86..9a2e1fde7128 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts index c875e23ee45f..0a475c234054 100644 --- a/arch/arm/boot/dts/imx53-cx9020.dts +++ b/arch/arm/boot/dts/imx53-cx9020.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2017 Beckhoff Automation GmbH & Co. KG * based on imx53-qsb.dts - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index db2e5bce9b6a..fe5e0d308e99 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2014 Marek Vasut <marex@denx.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "imx53.dtsi" @@ -52,7 +46,7 @@ clock-frequency = <400000>; status = "okay"; - stmpe610@41 { + touchscreen@41 { compatible = "st,stmpe610"; reg = <0x41>; id = <0>; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index 3935fe6490ed..daab56abe94a 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2013 Marek Vasut <marex@denx.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts new file mode 100644 index 000000000000..f0a3fde0739c --- /dev/null +++ b/arch/arm/boot/dts/imx53-m53menlo.dts @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; +#include "imx53-m53.dtsi" + +/ { + model = "MENLO M53 EMBEDDED DEVICE"; + compatible = "menlo,m53menlo", "fsl,imx53"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user1 { + label = "TestLed601"; + gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + + user2 { + label = "TestLed602"; + gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + eth { + label = "EthLedYe"; + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + }; + + panel { + compatible = "edt,etm070080dh6"; + enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + reg_usbh1_vbus: regulator-usbh1-vbus { + compatible = "regulator-fixed"; + regulator-name = "vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>, + <&clks IMX5_CLK_CKO1_PODF>, + <&clks IMX5_CLK_CKO1>; + assigned-clock-parents = <&clks IMX5_CLK_AHB>; + assigned-clock-rates = <133333334>, <33333334>, <33333334>; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_edt_ft5x06>; + interrupt-parent = <&gpio6>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + dac@60 { + compatible = "microchip,mcp4725"; + reg = <0x60>; + }; +}; + +&i2c2 { + touchscreen@41 { + status = "disabled"; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx53-m53evk { + hoggrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 + MX53_PAD_EIM_EB3__GPIO2_31 0x1d5 + MX53_PAD_PATA_DA_0__GPIO7_6 0x1d5 + MX53_PAD_GPIO_19__CCM_CLKO 0x1d5 + MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x1d5 + MX53_PAD_CSI0_DAT4__GPIO5_22 0x1d5 + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1d5 + MX53_PAD_CSI0_DAT6__GPIO5_24 0x1d5 + MX53_PAD_CSI0_DAT7__GPIO5_25 0x1d5 + MX53_PAD_CSI0_DAT8__GPIO5_26 0x1d5 + MX53_PAD_CSI0_DAT9__GPIO5_27 0x1d5 + MX53_PAD_CSI0_DAT10__GPIO5_28 0x1d5 + MX53_PAD_CSI0_DAT11__GPIO5_29 0x1d5 + MX53_PAD_CSI0_DAT14__GPIO6_0 0x1d5 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX53_PAD_CSI0_DAT15__GPIO6_1 0x1d5 + MX53_PAD_CSI0_DAT16__GPIO6_2 0x1d5 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX53_PAD_GPIO_7__CAN1_TXCAN 0x1c4 + MX53_PAD_GPIO_8__CAN1_RXCAN 0x1c4 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1c4 + MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x1c4 + >; + }; + + pinctrl_display_gpio: display-gpiogrp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__GPIO5_30 0x1d5 /* Reset */ + MX53_PAD_CSI0_DAT13__GPIO5_31 0x1d5 /* Interrupt */ + >; + }; + + pinctrl_edt_ft5x06: edt-ft5x06grp { + fsl,pins = < + MX53_PAD_PATA_DATA9__GPIO2_9 0x1d5 /* Reset */ + MX53_PAD_CSI0_DAT19__GPIO6_5 0x1d5 /* Interrupt */ + MX53_PAD_PATA_DATA10__GPIO2_10 0x1d5 /* Wake */ + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 + MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4 + MX53_PAD_GPIO_5__I2C3_SCL 0x400001e4 + >; + }; + + pinctrl_lvds0: lvds0grp { + /* LVDS pins only have pin mux configuration */ + fsl,pins = < + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 + >; + }; + + pinctrl_usb: usbgrp { + fsl,pins = < + MX53_PAD_GPIO_2__GPIO1_2 0x1d5 + MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1d5 + >; + }; + }; +}; + +&ldb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds0>; + status = "okay"; + + lvds0: lvds-channel@0 { + reg = <0>; + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@2 { + reg = <2>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb>; + vbus-supply = <®_usbh1_vbus>; + phy_type = "utmi"; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 296dd74fc246..09eee0dd44c1 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx53-pinfunc.h b/arch/arm/boot/dts/imx53-pinfunc.h index 59f9c29e3fe2..67bd06610fdf 100644 --- a/arch/arm/boot/dts/imx53-pinfunc.h +++ b/arch/arm/boot/dts/imx53-pinfunc.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX53_PINFUNC_H diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index c77d58f06c94..ea90fd95ad01 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "imx53.dtsi" diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts index 957053755c3c..ae53d178a683 100644 --- a/arch/arm/boot/dts/imx53-voipac-bsb.dts +++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi index d595034f3f1b..289feab42b88 100644 --- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "imx53.dtsi" diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index b3300300aabe..9b672ed2486d 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -702,7 +702,7 @@ reg = <0x63fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi new file mode 100644 index 000000000000..2a6ce87071f9 --- /dev/null +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -0,0 +1,557 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2019 Logic PD, Inc. + +/ { + keyboard { + compatible = "gpio-keys"; + + btn0 { + gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>; + label = "btn0"; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + + btn1 { + gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>; + label = "btn1"; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + + btn2 { + gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>; + label = "btn2"; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + + btn3 { + gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>; + label = "btn3"; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + + }; + + leds { + compatible = "gpio-leds"; + + gen-led0 { + label = "led0"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led0>; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + }; + + gen-led1 { + label = "led1"; + gpios = <&pcf8575 8 GPIO_ACTIVE_HIGH>; + }; + + gen-led2 { + label = "led2"; + gpios = <&pcf8575 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + gen-led3 { + label = "led3"; + gpios = <&pcf8575 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + reg_usb_otg_vbus: regulator-otg-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_otg>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_3v3: regulator-3v3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_3v3>; + compatible = "regulator-fixed"; + regulator-name = "reg_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + regulator-always-on; + }; + + reg_enet: regulator-ethernet { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_enet>; + compatible = "regulator-fixed"; + regulator-name = "ethernet-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&sw4_reg>; + }; + + reg_audio: regulator-audio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_audio>; + compatible = "regulator-fixed"; + regulator-name = "3v3_aud"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_3v3>; + }; + + reg_hdmi: regulator-hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_hdmi>; + compatible = "regulator-fixed"; + regulator-name = "hdmi-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_3v3>; + }; + + reg_uart3: regulator-uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_uart3>; + compatible = "regulator-fixed"; + regulator-name = "uart3-supply"; + gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_3v3>; + }; + + reg_1v8: regulator-1v8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_1v8>; + compatible = "regulator-fixed"; + regulator-name = "1v8-supply"; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_3v3>; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_pcie>; + regulator-name = "mpcie_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_mipi: regulator-mipi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_mipi>; + regulator-name = "mipi_pwr_en"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&wm8962>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <4>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-reset-duration = <10>; + phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + phy-supply = <®_enet>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + wm8962: audio-codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0000 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x0000 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; +}; + +&i2c3 { + ov5640: camera@10 { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x10>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <®_mipi>; + AVDD-supply = <®_mipi>; + DVDD-supply = <®_mipi>; + reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + + port { + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + + pcf8575: gpio@20 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcf8574>; + compatible = "nxp,pcf8575"; + reg = <0x20>; + interrupt-parent = <&gpio6>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + lines-initial-states = <0x0710>; + wakeup-source; + }; +}; + +&ipu1_csi1_from_mipi_vc1 { + clock-lanes = <0>; + data-lanes = <1 2>; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; +}; + +&ssi2 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <®_3v3>; + no-1-8-v; + keep-power-in-suspend; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* ENET_INT */ + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1b0b0 /* ETHR_nRST */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_led0: led0grp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 + >; + }; + + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b1 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b1 + >; + }; + + pinctrl_pcf8574: pcf8575grp { + fsl,pins = < + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_1v8: reg1v8grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 + >; + }; + + pinctrl_reg_3v3: reg3v3grp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 + >; + }; + + pinctrl_reg_audio: reg-audiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_reg_enet: reg-enetgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 + >; + }; + + pinctrl_reg_hdmi: reg-hdmigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 + >; + }; + + pinctrl_reg_mipi: reg-mipigrp { + fsl,pins = <MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b1>; + }; + + pinctrl_reg_pcie: reg-pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_reg_uart3: reguart3grp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + >; + }; + + pinctrl_reg_usb_h1_vbus: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_reg_usb_otg: reg-usb-otggrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0xd17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17069 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10069 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17069 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17069 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17069 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17069 + >; + }; + + pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + +}; diff --git a/arch/arm/boot/dts/imx6-logicpd-som.dtsi b/arch/arm/boot/dts/imx6-logicpd-som.dtsi new file mode 100644 index 000000000000..7ceae3573248 --- /dev/null +++ b/arch/arm/boot/dts/imx6-logicpd-som.dtsi @@ -0,0 +1,365 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2019 Logic PD, Inc. + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x80000000>; + }; + + reg_wl18xx_vmmc: regulator-wl18xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1837"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vddcore"; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vddsoc"; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "gen_3v3"; + regulator-boot-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-name = "sw3a_vddr"; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-name = "sw3b_vddr"; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "gen_rgmii"; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-name = "gen_5v0"; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "gen_vsns"; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "gen_1v5"; + }; + + vgen2_reg: vgen2 { + regulator-name = "vgen2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-name = "gen_vadj_0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-name = "gen_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-name = "gen_vadj_1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-name = "gen_2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + coin_reg: coin { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + }; + + temperature-sensor@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp102"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tempsense>; + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + pagesize = <32>; + read-only; /* Manufacturing EEPROM programmed at factory */ + reg = <0x51>; + }; + + eeprom@52 { + compatible = "atmel,24c64"; + pagesize = <32>; + reg = <0x52>; + }; +}; + +/* Reroute power feeding the CPU to come from the external PMIC */ +®_arm +{ + vin-supply = <&sw1a_reg>; +}; + +®_soc +{ + vin-supply = <&sw1c_reg>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpmi_nand: gpmi-nandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < /* Enable ARM Debugger */ + MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_tempsense: tempsensegrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x13059 /* BT_EN */ + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170B9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170B9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170B9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170B9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17049 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10049 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x130b0 /* WL_IRQ */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* WLAN_EN */ + >; + }; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_wl18xx_vmmc>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + tcxo-clock-frequency = <26000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index b87a85cd44ac..37f80ab8ccd0 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * support fot the imx6 based aristainetos board * * Copyright (C) 2014 Heiko Schocher <hs@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index e71ad9062fd1..8d8c8c27e482 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * support fot the imx6 based aristainetos board * * Copyright (C) 2014 Heiko Schocher <hs@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index d5f7a1703aae..9a5d6c94cca4 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -228,10 +228,11 @@ &weim { status = "okay"; - /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */ + /* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */ ranges = <0 0 0x08000000 0x02000000 1 0 0x0a000000 0x02000000 - 2 0 0x0c000000 0x02000000>; + 2 0 0x0c000000 0x02000000 + 3 0 0x0e000000 0x02000000>; /* SRAM on Colibri nEXT_CS0 */ sram@0,0 { diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts index 588286adee67..cece4aafdad8 100644 --- a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts +++ b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifndef __DTS_V1__ diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts new file mode 100644 index 000000000000..9eb2b73951b2 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 Eckelmann AG. + * Copyright (C) 2013 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "imx6dl.dtsi" + +/ { + model = "Eckelmann CI 4X10 Board"; + compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl"; + + chosen { + stdout-path = &uart3; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + rmii_clk: clock-rmii { + /* This clock is provided by the phy (KSZ8091RNB) */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + siox { + compatible = "eckelmann,siox-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_siox>; + din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; + dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; + dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>; + status = "okay"; + + flash@0 { + compatible = "everspin,mr25h256"; + reg = <0>; + spi-max-frequency = <15000000>; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&gpio2 { + gpio-line-names = "buzzer", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", "", "", "", "in2", + "prio2", "prio1", "aux", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio6 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "in1", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + temperature-sensor@49 { + compatible = "ad,ad7414"; + reg = <0x49>; + }; + + rtc@51 { + compatible = "nxp,pcf2127"; + reg = <0x51>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hog { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00000018 /* buzzer */ + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x00000018 /* OUT_1 */ + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x00000018 /* OUT_2 */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x00000018 /* OUT_3 */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x00000000 /* In1 */ + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x00000000 /* In2 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x00000018 /* unused watchdog pin */ + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x00000018 /* unused watchdog pin */ + + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x000100a0 + MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x000100a0 + MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x000100a0 + MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000100a0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x000100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x000100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x000100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x0001b098 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x0001b098 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x0001b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x0001b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x0001b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x0001b0b0 + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x00000018 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x0001b020 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x0001b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x0001b020 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x0001b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + /* without SION i2c doesn't detect bus busy */ + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b820 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b820 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x00000018 + >; + }; + + pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0001b0b0 + >; + }; + + pinctrl_siox: sioxgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x0001b010 /* DIN */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b010 /* DOUT */ + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0001b010 /* DCLK */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x0001b010 /* DLD */ + >; + }; + + pinctrl_uart1_dte: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x0001b010 + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x0001b010 + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x0001b010 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0001b010 /* DCD */ + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x0001b010 /* DTR */ + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0001b010 /* DSR */ + >; + }; + + pinctrl_uart2_dte: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x0001b010 + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x0001b010 + MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x0001b010 + MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0001b010 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b010 /* DCD */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b010 /* DTR */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0001b010 /* DSR */ + >; + }; + + pinctrl_uart3_dce: uart3grp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x0001b010 + MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x0001b010 + >; + }; + + pinctrl_uart4_dce: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x0001b010 + >; + }; + + pinctrl_uart5_dce: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x0001b010 /* RTS */ + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x0001b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x00017059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x00010059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x00017059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x00017059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x00017059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x00017059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x00017059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x00017059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x00017059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x00017059 + >; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_dte>; + uart-has-rtscts; + fsl,dte-mode; + dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_dte>; + uart-has-rtscts; + fsl,dte-mode; + dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_dce>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_dce>; + rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_dce>; + rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-gw51xx.dts b/arch/arm/boot/dts/imx6dl-gw51xx.dts index b2bd022fc6be..9956d12a1245 100644 --- a/arch/arm/boot/dts/imx6dl-gw51xx.dts +++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/imx6dl-gw52xx.dts index 5f9f8948100d..9ea23dd54f3c 100644 --- a/arch/arm/boot/dts/imx6dl-gw52xx.dts +++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/imx6dl-gw53xx.dts index 9bfc620d37bd..182e8194c249 100644 --- a/arch/arm/boot/dts/imx6dl-gw53xx.dts +++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/imx6dl-gw54xx.dts index b909bdf9a2ef..a106c4e3e329 100644 --- a/arch/arm/boot/dts/imx6dl-gw54xx.dts +++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-gw552x.dts b/arch/arm/boot/dts/imx6dl-gw552x.dts index a4b700cef188..4864a36f9b36 100644 --- a/arch/arm/boot/dts/imx6dl-gw552x.dts +++ b/arch/arm/boot/dts/imx6dl-gw552x.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2014 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts index 08e97801494e..0a07cc6f815e 100644 --- a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts +++ b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi index d7e72993eaf8..6f8aaf524425 100644 --- a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h index 37e430a261de..9d88d09f9bf6 100644 --- a/arch/arm/boot/dts/imx6dl-pinfunc.h +++ b/arch/arm/boot/dts/imx6dl-pinfunc.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX6DL_PINFUNC_H diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts index 853e58defa9c..0f1616bfa9a8 100644 --- a/arch/arm/boot/dts/imx6dl-rex-basic.dts +++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2014 FEDEVEL, Inc. * * Author: Robert Nelson <robertcnelson@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 65c184bb8fb0..829654e1835a 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -1,10 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2014 Iain Paton <ipaton0@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; @@ -92,7 +88,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts index 660d52a245ba..ff3283c83a39 100644 --- a/arch/arm/boot/dts/imx6dl-sabreauto.dts +++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts @@ -11,3 +11,18 @@ model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board"; compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl"; }; + +&cpu0 { + operating-points = < + /* kHz uV */ + 996000 1275000 + 792000 1175000 + 396000 1150000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1200000 + 792000 1175000 + 396000 1175000 + >; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi new file mode 100644 index 000000000000..e8d800fec637 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -0,0 +1,595 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 32 64 128 255>; + default-brightness-level = <32>; + num-interpolated-steps = <8>; + power-supply = <&sw2_reg>; + status = "disabled"; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + status = "disabled"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + compatible = "dataimage,scf0700c48ggu18"; + power-supply = <&sw2_reg>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "okay"; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + phy-reset-duration = <20>; + phy-supply = <&sw2_reg>; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + switch@10 { + compatible = "qca,qca8334"; + reg = <10>; + + switch_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: port@0 { + reg = <0>; + label = "cpu"; + phy-mode = "rgmii-id"; + ethernet = <&fec>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@2 { + reg = <2>; + label = "eth2"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "eth1"; + phy-handle = <&phy_port3>; + }; + }; + }; + }; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_cec>; + ddc-i2c-bus = <&i2c2>; + status = "disabled"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze200"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vsnvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + leds: led-controller@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + clock-mode = /bits/ 8 <1>; + status = "disabled"; + + chan0 { + chan-name = "R"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan1 { + chan-name = "G"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan2 { + chan-name = "B"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan3 { + chan-name = "W"; + led-cur = /bits/ 8 <0x0>; + max-cur = /bits/ 8 <0x0>; + }; + }; + + eeprom@57 { + compatible = "atmel,24c128"; + reg = <0x57>; + pagesize = <64>; + status = "okay"; + }; + + touchscreen: touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + reg = <0x5c>; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + status = "disabled"; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; + + oled: oled@3d { + compatible = "solomon,ssd1305fb-i2c"; + reg = <0x3d>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + gpio_oled: gpio@41 { + compatible = "nxp,pca9536"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x41>; + vcc-supply = <&sw2_reg>; + status = "disabled"; + }; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098 + >; + }; + + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1b898 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b098 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b098 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b098 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbus { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098 + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbus { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b018 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b018 + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 + >; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; + status = "disabled"; +}; + +&pwm1 { + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; + status = "okay"; +}; + +&usbphy2 { + fsl,tx-d-cal = <109>; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <&sw2_reg>; + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + vmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-draco.dts b/arch/arm/boot/dts/imx6dl-yapp4-draco.dts new file mode 100644 index 000000000000..a38c407fd837 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-draco.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Draco i.MX6Solo board"; + compatible = "ysoft,imx6dl-yapp4-draco", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; +}; + +&backlight { + status = "okay"; +}; + +&lcd_display { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&panel { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchscreen { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts new file mode 100644 index 000000000000..f97927064750 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Hydra i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-hydra", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x80000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +®_pcie { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts new file mode 100644 index 000000000000..0d594e4bd559 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Ursa i.MX6Solo board"; + compatible = "ysoft,imx6dl-yapp4-ursa", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; +}; + +&backlight { + status = "okay"; +}; + +&lcd_display { + status = "okay"; +}; + +&panel { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&switch_ports { + /delete-node/ port@2; +}; + +&touchscreen { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index baadcb7fe011..0b40f52268b3 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index adc9455e42c7..37c63402157b 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -171,7 +171,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts index e13acbbcdff4..8bfe6337cd65 100644 --- a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts +++ b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifndef __DTS_V1__ diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index ee8c38eee03b..f9df207b2778 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Data Modul AG - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts index 8e8bcd8fe0fb..f80173458e3f 100644 --- a/arch/arm/boot/dts/imx6q-gw51xx.dts +++ b/arch/arm/boot/dts/imx6q-gw51xx.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/imx6q-gw52xx.dts index 0b8ae007ad73..6e1c493c9c8c 100644 --- a/arch/arm/boot/dts/imx6q-gw52xx.dts +++ b/arch/arm/boot/dts/imx6q-gw52xx.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/imx6q-gw53xx.dts index a56ef77eff3f..f13df8e9c8c4 100644 --- a/arch/arm/boot/dts/imx6q-gw53xx.dts +++ b/arch/arm/boot/dts/imx6q-gw53xx.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 4038170369fc..b6e2b580051d 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts index 56e5b5050fcf..ecc3989f607b 100644 --- a/arch/arm/boot/dts/imx6q-gw54xx.dts +++ b/arch/arm/boot/dts/imx6q-gw54xx.dts @@ -1,21 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-gw54xx.dtsi" +#include <dt-bindings/media/tda1997x.h> / { model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX"; compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q"; + + sound-digital { + compatible = "simple-audio-card"; + simple-audio-card,name = "tda1997x-audio"; + + simple-audio-card,dai-link@0 { + format = "i2s"; + + cpu { + sound-dai = <&ssi2>; + }; + + codec { + bitclock-master; + frame-master; + sound-dai = <&hdmi_receiver>; + }; + }; + }; }; &i2c3 { @@ -35,6 +49,61 @@ }; }; }; + + hdmi_receiver: hdmi-receiver@48 { + compatible = "nxp,tda19971"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tda1997x>; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + DOVDD-supply = <®_3p3v>; + AVDD-supply = <&sw4_reg>; + DVDD-supply = <&sw4_reg>; + #sound-dai-cells = <0>; + nxp,audout-format = "i2s"; + nxp,audout-layout = <0>; + nxp,audout-width = <16>; + nxp,audout-mclk-fs = <128>; + /* + * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4] + * and Y[11:4] across 16bits in the same cycle + * which we map to VP[15:08]<->CSI_DATA[19:12] + */ + nxp,vidout-portcfg = + /*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/ + < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >, + /*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/ + < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >, + /*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/ + < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >, + /*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/ + < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >; + + port { + tda1997x_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <16>; + hsync-active = <1>; + vsync-active = <1>; + data-active = <1>; + }; + }; + }; +}; + +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <16>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>; + bus-width = <16>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; }; &ipu2_csi1_from_ipu2_csi1_mux { @@ -63,6 +132,30 @@ >; }; + pinctrl_ipu1_csi0: ipu1_csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + pinctrl_ipu2_csi1: ipu2_csi1grp { fsl,pins = < MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0 @@ -78,4 +171,10 @@ MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0 >; }; + + pinctrl_tda1997x: tda1997xgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6q-gw552x.dts b/arch/arm/boot/dts/imx6q-gw552x.dts index f87a8fa6e04d..c973b7304225 100644 --- a/arch/arm/boot/dts/imx6q-gw552x.dts +++ b/arch/arm/boot/dts/imx6q-gw552x.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2014 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts new file mode 100644 index 000000000000..d96ae54be338 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-logicpd.dts @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2019 Logic PD, Inc. + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6-logicpd-som.dtsi" +#include "imx6-logicpd-baseboard.dtsi" + +/ { + model = "Logic PD i.MX6QD SOM-M3"; + compatible = "fsl,imx6q"; + + backlight: backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 20000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <®_lcd>; + }; + + panel-lvds0 { + compatible = "okaya,rs800480t-7x0gp"; + power-supply = <®_lcd_reset>; + backlight = <&backlight>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + reg_lcd: regulator-lcd { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_reg>; + compatible = "regulator-fixed"; + regulator-name = "lcd_panel_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_3v3>; + startup-delay-us = <500000>; + }; + + reg_lcd_reset: regulator-lcd-reset { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_reset>; + compatible = "regulator-fixed"; + regulator-name = "nLCD_RESET"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_lcd>; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + +}; + +&pwm3 { + status = "okay"; +}; + +®_hdmi { + regulator-always-on; /* Without this, the level shifter on HDMI doesn't turn on */ +}; + +&iomuxc { + pinctrl_lcd_reg: lcdreg { + fsl,pins = < + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x100b0 /* R_LCD_PANEL_PWR */ + >; + }; + + pinctrl_lcd_reset: lcdreset { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 /* LCD_nRESET */ + >; + }; + + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* TOUCH_nPINTDAV */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index d8ccb533b6b7..84b30bd6908f 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -110,7 +110,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts index 74d9824e920b..a4d295455e67 100644 --- a/arch/arm/boot/dts/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -1,11 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2016-2017 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts index 1f4771304da8..affe30b02d5a 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts +++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi index 097f2c56c20b..500944bd2a05 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "imx6q.dtsi" diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h index cfb11d3e739c..e40409d04b97 100644 --- a/arch/arm/boot/dts/imx6q-pinfunc.h +++ b/arch/arm/boot/dts/imx6q-pinfunc.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX6Q_PINFUNC_H diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts index aa3004eab06c..1767e1a3cd53 100644 --- a/arch/arm/boot/dts/imx6q-rex-pro.dts +++ b/arch/arm/boot/dts/imx6q-rex-pro.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2014 FEDEVEL, Inc. * * Author: Robert Nelson <robertcnelson@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /dts-v1/; #include "imx6q.dtsi" diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts index 3129f727750f..9054c1d58b9d 100644 --- a/arch/arm/boot/dts/imx6q-sbc6x.dts +++ b/arch/arm/boot/dts/imx6q-sbc6x.dts @@ -1,8 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2013 Pavel Machek <pavel@denx.de> - * - * The code contained herein is licensed under the GNU General Public - * License V2. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 279b15e9ae2e..bfff87ce2e1f 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -1,49 +1,6 @@ -/* - * Copyright 2014 Soeren Moch <smoch@web.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2014 Soeren Moch <smoch@web.de> /dts-v1/; @@ -141,7 +98,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts index 0f0743db2779..a1c5e69d81ba 100644 --- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2016-2017 Zodiac Inflight Innovations - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 8380f1b26826..7c4ad541c3f5 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -332,11 +332,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -346,17 +352,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; }; @@ -369,8 +375,8 @@ pinctrl-names = "default", "recovery"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_recovery>; - scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi index 1ebf29f43a24..4738c3c1ab50 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi @@ -51,7 +51,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index ee4d0f84eeb2..d954661fa055 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * support fot the imx6 based aristainetos board * * Copyright (C) 2014 Heiko Schocher <hs@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 87e15e7cb32b..1beac22266ed 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -262,11 +262,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -276,17 +282,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; }; @@ -298,8 +304,8 @@ pinctrl-names = "default", "recovery"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_recovery>; - scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi index 397e205551c4..70d26616d771 100644 --- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi @@ -77,8 +77,6 @@ pwm_fan: pwm-fan { compatible = "pwm-fan"; - cooling-min-state = <0>; - cooling-max-state = <4>; #cooling-cells = <2>; pwms = <&pwm4 0 50000>; cooling-levels = <0 64 127 191 255>; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index d3609966b846..419a7cdc8ab5 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 2ff377d0df7e..1a9a9d98f284 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 68ab54351109..54b2beadd7a2 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 81b2fcf6eedf..1b6c1331c220 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -1,15 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> / { /* these are used by bootloader for disabling nodes */ @@ -115,12 +110,12 @@ }; }; - sound { + sound-analog { compatible = "fsl,imx6q-ventana-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "sgtl5000-audio"; ssi-controller = <&ssi1>; - audio-codec = <&codec>; + audio-codec = <&sgtl5000>; audio-routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", @@ -134,6 +129,25 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */ status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */ + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */ + IMX_AUDMUX_V2_PTCR_SYN) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + aud5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(1)>; + }; }; &can1 { @@ -332,7 +346,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - codec: sgtl5000@a { + sgtl5000: audio-codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -476,6 +490,9 @@ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + MX6QDL_PAD_EIM_D25__AUD5_RXC 0x130b0 + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x130b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 8e46a80f57a4..c23ba229fd05 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -46,6 +46,8 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/media/tda1997x.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> / { /* these are used by bootloader for disabling nodes */ @@ -99,6 +101,50 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + sound-digital { + compatible = "simple-audio-card"; + simple-audio-card,name = "tda1997x-audio"; + + simple-audio-card,dai-link@0 { + format = "i2s"; + + cpu { + sound-dai = <&ssi2>; + }; + + codec { + bitclock-master; + frame-master; + sound-dai = <&hdmi_receiver>; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */ + status = "okay"; + + ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */ + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */ + IMX_AUDMUX_V2_PTCR_SYN) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + aud5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(0)>; + }; }; &can1 { @@ -264,6 +310,60 @@ #gpio-cells = <2>; }; + hdmi_receiver: hdmi-receiver@48 { + compatible = "nxp,tda19971"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tda1997x>; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + DOVDD-supply = <®_3p3>; + AVDD-supply = <®_1p8b>; + DVDD-supply = <®_1p8a>; + #sound-dai-cells = <0>; + nxp,audout-format = "i2s"; + nxp,audout-layout = <0>; + nxp,audout-width = <16>; + nxp,audout-mclk-fs = <128>; + /* + * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4] + * and Y[11:4] across 16bits in the same cycle + * which we map to VP[15:08]<->CSI_DATA[19:12] + */ + nxp,vidout-portcfg = + /*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/ + < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >, + /*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/ + < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >, + /*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/ + < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >, + /*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/ + < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >; + + port { + tda1997x_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <16>; + hsync-active = <1>; + vsync-active = <1>; + data-active = <1>; + }; + }; + }; +}; + +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <16>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>; + bus-width = <16>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; }; &pcie { @@ -321,6 +421,14 @@ }; &iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_DISP0_DAT14__AUD5_RXC 0x130b0 + MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS 0x130b0 + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 @@ -376,6 +484,30 @@ >; }; + pinctrl_ipu1_csi0: ipu1_csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ @@ -400,6 +532,12 @@ >; }; + pinctrl_tda1997x: tda1997xgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index dacc2a14d0e7..dc646b72b59a 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2014 Gateworks Corporation - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index 9cb9a7439121..aee9221f0f29 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -311,7 +311,7 @@ tlv320aic3105: codec@18 { compatible = "ti,tlv320aic3x"; reg = <0x18>; - gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; clocks = <&clks IMX6QDL_CLK_CKO>; ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */ /* Regulators */ diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index 1d1b4bd0670f..a4217f564a53 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -264,7 +264,7 @@ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; vmcc-supply = <®_sd3_vmmc>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - bus-witdh = <4>; + bus-width = <4>; no-1-8-v; status = "okay"; }; @@ -275,7 +275,7 @@ pinctrl-1 = <&pinctrl_usdhc4_100mhz>; pinctrl-2 = <&pinctrl_usdhc4_200mhz>; vmcc-supply = <®_sd4_vmmc>; - bus-witdh = <8>; + bus-width = <8>; no-1-8-v; non-removable; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index 7ba317ae899b..82802f8ce7a0 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/sound/fsl-imx-audmux.h> diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 1b50b01e9bac..bc43c75f1745 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/gpio/gpio.h> @@ -79,7 +73,7 @@ status = "okay"; cs-gpios = <&gpio4 24 0>; - flash@0 { + som_flash: flash@0 { compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; @@ -89,10 +83,24 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; + phy-handle = <ðphy>; phy-mode = "rgmii"; + phy-reset-duration = <10>; /* in msecs */ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; phy-supply = <&vdd_eth_io_reg>; status = "disabled"; + + fec_mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + txc-skew-ps = <1680>; + rxc-skew-ps = <1860>; + }; + }; }; &gpmi { @@ -107,7 +115,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - eeprom@50 { + som_eeprom: eeprom@50 { compatible = "atmel,24c32"; reg = <0x50>; }; @@ -117,6 +125,7 @@ reg = <0x58>; interrupt-parent = <&gpio2>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */ + interrupt-controller; regulators { vddcore_reg: bcore1 { diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 039e3b8306c4..97f1659144ea 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2014 FEDEVEL, Inc. * * Author: Robert Nelson <robertcnelson@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 1280de50a984..f3404dd10537 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -292,7 +292,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 8930aec6464c..185fb17a3500 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -64,7 +64,6 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-always-on; }; gpio-keys { @@ -203,7 +202,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -250,6 +249,8 @@ pinctrl-0 = <&pinctrl_i2c1_mma8451_int>; interrupt-parent = <&gpio1>; interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®_sensors>; + vddio-supply = <®_sensors>; }; ov5642: camera@3c { @@ -440,6 +441,8 @@ pinctrl-0 = <&pinctrl_i2c3_mag3110_int>; interrupt-parent = <&gpio3>; interrupts = <16 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <®_sensors>; + vddio-supply = <®_sensors>; }; light-sensor@44 { @@ -449,6 +452,7 @@ pinctrl-0 = <&pinctrl_i2c3_isl29023_int>; interrupt-parent = <&gpio3>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <®_sensors>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index 4ccb7afc4b35..6d7f6b9035bc 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -53,7 +53,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi index 8752a4961c47..c41cac502bac 100644 --- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi +++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi @@ -183,7 +183,7 @@ IOVDD-supply = <®_3p3v>; DVDD-supply = <®_3p3v>; ai3x-ocmv = <0>; - gpio-reset = <&gpio5 5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index b7d5fb421404..50d9a989e06a 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -224,7 +224,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 69942c7ff89d..93be00a60c88 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2016-2017 Zodiac Inflight Innovations - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -210,6 +174,7 @@ panel { power-supply = <®_3p3v_display>; + backlight = <&sp_backlight>; status = "disabled"; port { @@ -327,7 +292,7 @@ compatible = "zii,rave-sp-watchdog"; }; - backlight { + sp_backlight: backlight { compatible = "zii,rave-sp-backlight"; }; @@ -384,7 +349,7 @@ AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; accel@1c { @@ -528,6 +493,11 @@ }; }; + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; + temp-sense@48 { compatible = "national,lm75"; reg = <0x48>; @@ -572,7 +542,7 @@ AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; touchscreen@20 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index fe17a3405edc..b3a77bcf00d5 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -4,6 +4,7 @@ // Copyright 2011 Linaro Ltd. #include <dt-bindings/clock/imx6qdl-clock.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -279,6 +280,7 @@ ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; + num-viewport = <4>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -833,6 +835,14 @@ status = "disabled"; }; + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + snvs_lpgpr: snvs-lpgpr { compatible = "fsl,imx6q-snvs-lpgpr"; }; @@ -918,7 +928,7 @@ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SDMA>, + clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; @@ -1129,14 +1139,16 @@ reg = <0x021ac000 0x4000>; }; - mmdc0: mmdc@21b0000 { /* MMDC0 */ + mmdc0: memory-controller@21b0000 { /* MMDC0 */ compatible = "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>; }; - mmdc1: mmdc@21b4000 { /* MMDC1 */ + mmdc1: memory-controller@21b4000 { /* MMDC1 */ + compatible = "fsl,imx6q-mmdc"; reg = <0x021b4000 0x4000>; + status = "disabled"; }; weim: weim@21b8000 { diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts index 98bf7a6b2850..57de447c4609 100644 --- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2016-2017 Zodiac Inflight Innovations - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6sl-pinfunc.h b/arch/arm/boot/dts/imx6sl-pinfunc.h index 77b17bcc7b70..bcf16060ecdc 100644 --- a/arch/arm/boot/dts/imx6sl-pinfunc.h +++ b/arch/arm/boot/dts/imx6sl-pinfunc.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX6SL_PINFUNC_H diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index e7524e73efb4..9ddbeea64b72 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -23,6 +23,13 @@ gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + mmc3 = &usdhc4; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -338,7 +345,7 @@ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_PWM1>, + clocks = <&clks IMX6SL_CLK_PERCLK>, <&clks IMX6SL_CLK_PWM1>; clock-names = "ipg", "per"; }; @@ -348,7 +355,7 @@ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_PWM2>, + clocks = <&clks IMX6SL_CLK_PERCLK>, <&clks IMX6SL_CLK_PWM2>; clock-names = "ipg", "per"; }; @@ -358,7 +365,7 @@ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_PWM3>, + clocks = <&clks IMX6SL_CLK_PERCLK>, <&clks IMX6SL_CLK_PWM3>; clock-names = "ipg", "per"; }; @@ -368,7 +375,7 @@ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_PWM4>, + clocks = <&clks IMX6SL_CLK_PERCLK>, <&clks IMX6SL_CLK_PWM4>; clock-names = "ipg", "per"; }; @@ -741,7 +748,7 @@ reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_SDMA>, - <&clks IMX6SL_CLK_SDMA>; + <&clks IMX6SL_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; /* imx6sl reuses imx6q sdma firmware */ @@ -922,7 +929,7 @@ status = "disabled"; }; - mmdc: mmdc@21b0000 { + memory-controller@21b0000 { compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; clocks = <&clks IMX6SL_CLK_MMDC_P0_IPG>; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 62847c68330b..1b4899f0fcde 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -64,6 +64,7 @@ 198000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6SLL_CLK_ARM>, <&clks IMX6SLL_CLK_PLL2_PFD2>, <&clks IMX6SLL_CLK_STEP>, @@ -621,7 +622,7 @@ compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SLL_CLK_SDMA>, + clocks = <&clks IMX6SLL_CLK_IPG>, <&clks IMX6SLL_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h index 42c4c800feea..aa194a2fdd53 100644 --- a/arch/arm/boot/dts/imx6sx-pinfunc.h +++ b/arch/arm/boot/dts/imx6sx-pinfunc.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX6SX_PINFUNC_H diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index b0ee324afe58..315044ccd65f 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -75,7 +75,7 @@ &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy1>; fsl,magic-packet; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 08ede56c3f10..f6972deb5e39 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -191,7 +191,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; phy-supply = <®_enet_3v3>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy1>; phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index 2bc51623a806..28563f21024e 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 Christoph Fritz <chf.fritz@googlemail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index d1375d3650fd..b16a123990a2 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -785,6 +785,18 @@ clocks = <&clks IMX6SX_CLK_GPU>; }; + pd_disp: power-domain@2 { + reg = <2>; + #power-domain-cells = <0>; + clocks = <&clks IMX6SX_CLK_PXP_AXI>, + <&clks IMX6SX_CLK_DISPLAY_AXI>, + <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_LCDIF2_PIX>, + <&clks IMX6SX_CLK_CSI>, + <&clks IMX6SX_CLK_VADC>; + }; + pd_pci: power-domain@3 { reg = <3>; #power-domain-cells = <0>; @@ -808,7 +820,7 @@ compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_SDMA>, + clocks = <&clks IMX6SX_CLK_IPG>, <&clks IMX6SX_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; @@ -1005,7 +1017,7 @@ status = "disabled"; }; - mmdc: mmdc@21b0000 { + memory-controller@21b0000 { compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>; @@ -1205,6 +1217,7 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_PXP_AXI>; clock-names = "axi"; + power-domains = <&pd_disp>; status = "disabled"; }; @@ -1226,6 +1239,7 @@ <&clks IMX6SX_CLK_LCDIF_APB>, <&clks IMX6SX_CLK_DISPLAY_AXI>; clock-names = "pix", "axi", "disp_axi"; + power-domains = <&pd_disp>; status = "disabled"; }; @@ -1237,6 +1251,7 @@ <&clks IMX6SX_CLK_LCDIF_APB>, <&clks IMX6SX_CLK_DISPLAY_AXI>; clock-names = "pix", "axi", "disp_axi"; + power-domains = <&pd_disp>; status = "disabled"; }; @@ -1246,6 +1261,7 @@ clocks = <&clks IMX6SX_CLK_VADC>, <&clks IMX6SX_CLK_CSI>; clock-names = "vadc", "csi"; + power-domains = <&pd_disp>; status = "disabled"; }; }; @@ -1370,7 +1386,8 @@ <&clks IMX6SX_CLK_PCIE_REF_125M>, <&clks IMX6SX_CLK_DISPLAY_AXI>; clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi"; - power-domains = <&pd_pci>; + power-domains = <&pd_disp>, <&pd_pci>; + power-domain-names = "pcie", "pcie_phy"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi new file mode 100644 index 000000000000..fc2997449b49 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx6ul.dtsi" + +/ { + model = "Phytec phyCORE i.MX6 UltraLite"; + compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + /* + * Set the minimum memory size here and + * let the bootloader set the real size. + */ + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; + }; + + gpio_leds_som: leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioleds_som>; + compatible = "gpio-leds"; + + led_green { + label = "phycore:green"; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + eeprom@52 { + compatible = "catalyst,24c32", "atmel,24c32"; + reg = <0x52>; + }; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x17059 + >; + }; + + pinctrl_gpioleds_som: gpioledssomgrp { + fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0>; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_i2c1: i2cgrp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + +}; diff --git a/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi new file mode 100644 index 000000000000..e2f38f39a6ad --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +#include <dt-bindings/input/input.h> + +/ { + gpio_keys: gpio-keys { + compatible = "gpio-key"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + status = "disabled"; + + power { + label = "Power Button"; + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + user_leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_leds>; + status = "disabled"; + + led_yellow { + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led_red { + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&iomuxc { + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x79 + >; + }; + + pinctrl_user_leds: user_ledsgrp { + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x79 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x79 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts new file mode 100644 index 000000000000..b6a1407a9d44 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +/dts-v1/; +#include "imx6ul-phytec-pcl063.dtsi" +#include "imx6ul-phytec-phyboard-segin.dtsi" +#include "imx6ul-phytec-peb-eval-01.dtsi" + +/ { + model = "Phytec phyBOARD-Segin i.MX6 UltraLite Full Featured"; + compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; +}; + +&adc1 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&tlv320 { + status = "okay"; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +®_can1_en { + status = "okay"; +}; + +®_sound_1v8 { + status = "okay"; +}; + +®_sound_3v3 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sound { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi new file mode 100644 index 000000000000..7bf439a77d2c --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi @@ -0,0 +1,329 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +/ { + model = "Phytec phyBOARD-Segin i.MX6 UltraLite"; + compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; + + aliases { + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + reg_sound_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "i2s-audio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + status = "disabled"; + }; + + reg_sound_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "i2s-audio-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "disabled"; + }; + + reg_can1_en: regulator-can1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&princtrl_flexcan1_en>; + regulator-name = "Can"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_adc1_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "LINE1L", "Line In", + "LINE1R", "Line In"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&tlv320>; + clocks = <&clks IMX6UL_CLK_SAI2>; + }; + }; + +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + vref-supply = <®_adc1_vref_3v3>; + /* + * driver can not separate a specific channel so we request 4 channels + * here - we need only the fourth channel + */ + num-channels = <4>; + status = "disabled"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_en>; + status = "disabled"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "disabled"; +}; + +&i2c1 { + tlv320: codec@18 { + compatible = "ti,tlv320aic3007"; + #sound-dai-cells = <0>; + reg = <0x18>; + AVDD-supply = <®_sound_3v3>; + IOVDD-supply = <®_sound_3v3>; + DRVDD-supply = <®_sound_3v3>; + DVDD-supply = <®_sound_1v8>; + status = "disabled"; + }; + + stmpe: touchscreen@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe>; + status = "disabled"; + + touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + touchscreen-inverted-x = <1>; + touchscreen-inverted-y = <1>; + }; + }; + + i2c_rtc: rtc@68 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + compatible = "microcrystal,rv4162"; + reg = <0x68>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + status = "disabled"; + }; +}; + +&mdio { + ethphy1: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <19200000>; + fsl,sai-mclk-direction-output; + status = "disabled"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "disabled"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + status = "disabled"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "disabled"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "disabled"; +}; + +&iomuxc { + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + >; + }; + + pinctrl_flexcan1: flexcan1 { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + princtrl_flexcan1_en: flexcan1engrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/imx6ul-pinfunc.h index 7b9a4dc38456..380d2db13a9b 100644 --- a/arch/arm/boot/dts/imx6ul-pinfunc.h +++ b/arch/arm/boot/dts/imx6ul-pinfunc.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2014 - 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX6UL_PINFUNC_H diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 62ed30c781ed..a7f6d1d58e20 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -358,7 +358,7 @@ pwm1: pwm@2080000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_PWM1>, <&clks IMX6UL_CLK_PWM1>; clock-names = "ipg", "per"; @@ -369,7 +369,7 @@ pwm2: pwm@2084000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_PWM2>, <&clks IMX6UL_CLK_PWM2>; clock-names = "ipg", "per"; @@ -380,7 +380,7 @@ pwm3: pwm@2088000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_PWM3>, <&clks IMX6UL_CLK_PWM3>; clock-names = "ipg", "per"; @@ -391,7 +391,7 @@ pwm4: pwm@208c000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_PWM4>, <&clks IMX6UL_CLK_PWM4>; clock-names = "ipg", "per"; @@ -708,7 +708,7 @@ "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_SDMA>, + clocks = <&clks IMX6UL_CLK_IPG>, <&clks IMX6UL_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; @@ -914,7 +914,7 @@ status = "disabled"; }; - mmdc: mmdc@21b0000 { + memory-controller@21b0000 { compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 6c63a7384611..9ad1da159768 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -94,16 +94,16 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; - sda-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &i2c2 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; - sda-gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; ad7879@2c { diff --git a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h index f6fb6783c193..54cfe72295aa 100644 --- a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h +++ b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2016 Freescale Semiconductor, Inc. * Copyright (C) 2017 NXP diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h index a282a31a4bae..eb025a9d4759 100644 --- a/arch/arm/boot/dts/imx6ull-pinfunc.h +++ b/arch/arm/boot/dts/imx6ull-pinfunc.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2016 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __DTS_IMX6ULL_PINFUNC_H diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index f3668fe69eac..22e4a307fa59 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -30,6 +30,18 @@ >; }; +&ocotp { + compatible = "fsl,imx6ull-ocotp", "syscon"; +}; + +&usdhc1 { + compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc"; +}; + +&usdhc2 { + compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc"; +}; + / { soc { aips3: aips-bus@2200000 { diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi new file mode 100644 index 000000000000..50abf18ad30b --- /dev/null +++ b/arch/arm/boot/dts/imx7-mba7.dtsi @@ -0,0 +1,550 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Include file for TQ Systems MBa7 carrier board. + * + * Copyright (C) 2016 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + * + * Note: This file does not include nodes for all peripheral devices. + * As device driver coverage increases additional nodes can be added. + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + beeper { + compatible = "gpio-beeper"; + gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>; + }; + + chosen { + stdout-path = &uart6; + }; + + gpio_buttons: gpio-keys { + compatible = "gpio-keys"; + + button-0 { + /* #SWITCH_A */ + label = "S11"; + linux,code = <KEY_1>; + gpios = <&pca9555 13 GPIO_ACTIVE_LOW>; + }; + + button-1 { + /* #SWITCH_B */ + label = "S12"; + linux,code = <KEY_2>; + gpios = <&pca9555 14 GPIO_ACTIVE_LOW>; + }; + + button-2 { + /* #SWITCH_C */ + label = "S13"; + linux,code = <KEY_3>; + gpios = <&pca9555 15 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led1 { + label = "led1"; + gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + label = "led2"; + gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_SD1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_fec1_pwdn: regulator-fec1-pwdn { + compatible = "regulator-fixed"; + regulator-name = "PWDN_FEC1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_fec2_pwdn: regulator-fec2-pwdn { + compatible = "regulator-fixed"; + regulator-name = "PWDN_FEC2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_USBOTG1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_USBOTG2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_mpcie_1v5: regulator-mpcie-1v5 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V5_MPCIE"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_mpcie_3v3: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_MPCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_mba_12v0: regulator-mba-12v0 { + compatible = "regulator-fixed"; + regulator-name = "VCC12V0_MBA7"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lvds_transmitter: regulator-lvds-transmitter { + compatible = "regulator-fixed"; + regulator-name = "#SHTDN_LVDS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_REF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&sw2_reg>; + }; + + reg_audio_3v3: regulator-audio-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_AUDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&adc2 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + num-chipselects = <3>; + cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>, + <&gpio4 2 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-chipselects = <1>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + phy-reset-delay = <1>; + phy-supply = <®_fec1_pwdn>; + phy-handle = <ðphy1_0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1_0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + /* LED1: Link/Activity, LED2: Error */ + ti,led-function = <0x0db0>; + /* Active low, LED1 and LED2 driven by phy */ + ti,led-ctrl = <0x1001>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&i2c1 { + lm75: temperature-sensor@49 { + compatible = "national,lm75"; + reg = <0x49>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clock-names = "mclk"; + ldoin-supply = <®_audio_3v3>; + iov-supply = <®_audio_3v3>; + }; + + pca9555: gpio-expander@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9555>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio7>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_mba7_1>; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x7c + MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x74 + MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x74 + MX7D_PAD_UART1_RX_DATA__GPIO4_IO0 0x74 + MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x74 + MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x74 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c + MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74 + MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74 + MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0 0x74 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x02 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x00 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x79 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x79 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x79 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79 + /* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */ + MX7D_PAD_ENET1_COL__GPIO7_IO15 0x40000070 + /* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */ + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x40000078 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x5a + MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x52 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x5a + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x52 + >; + }; + + pinctrl_hog_mba7_1: hogmba71grp { + fsl,pins = < + /* Limitation: WDOG2_B / WDOG2_RESET not usable */ + MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13 0x4000007c + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x40000074 + /* #BOOT_EN */ + MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x40000010 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000078 + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000078 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x40000078 + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x40000078 + >; + }; + + + pinctrl_pca9555: pca95550grp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x78 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x7e + MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x76 + MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x76 + MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x7e + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e + MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76 + MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS 0x76 + MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS 0x7e + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x7e + MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x76 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x7d + MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x75 + MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x75 + MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x7d + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x7e + MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x76 + MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS 0x76 + /* Limitation: RTS is not connected */ + MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS 0x7e + >; + }; + + pinctrl_usdhc1_gpio: usdhc1grp_gpio { + fsl,pins = < + /* WP */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x7c + /* CD */ + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x7c + /* VSELECT */ + MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5e + MX7D_PAD_SD1_CLK__SD1_CLK 0x57 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5e + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5e + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5e + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5e + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x57 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x57 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_pwm1: pwm1grp { + fsl,pins = < + /* LCD_CONTRAST */ + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x50 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x5c + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59 + >; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh { + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + vbus-supply = <®_usb_otg1_vbus>; + srp-disable; + hnp-disable; + adp-disable; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_sd1_vmmc>; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi new file mode 100644 index 000000000000..9aaed85138cb --- /dev/null +++ b/arch/arm/boot/dts/imx7-tqma7.dtsi @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Include file for TQ Systems TQMa7x boards with full mounted PCB. + * + * Copyright (C) 2016 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/ { + memory@80000000 { + device_type = "memory"; + /* 512 MB - default configuration */ + reg = <0x80000000 0x20000000>; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + pfuze3000: pmic@8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic1>; + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + /* NXP SE97BTP with temperature sensor + eeprom */ + se97b: temperature-sensor-eeprom@1e { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1e>; + status = "okay"; + }; + + /* ST M24C64 */ + m24c64: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + status = "okay"; + }; + + at24c02: eeprom@56 { + compatible = "atmel,24c02"; + reg = <0x56>; + pagesize = <16>; + status = "okay"; + }; + + ds1339: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x40000078 + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x40000078 + >; + }; + + pinctrl_pmic1: pmic1grp { + fsl,pins = < + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x4000005C + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x56 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x51 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x51 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x30 + >; + }; +}; + +&sdma { + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + vmmc-supply = <&vgen4_reg>; + vqmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + /* + * Errata e10574: + * WDOG reset needs to run with WDOG_RESET_B signal enabled. + * X1-51 (WDOG1#) signal needs carrier board handling to reset + * TQMa7 on X1-22 (RESET_IN#). + */ + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts new file mode 100644 index 000000000000..221274c73dbd --- /dev/null +++ b/arch/arm/boot/dts/imx7d-mba7.dts @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Source for TQ Systems TQMa7D board on MBa7 carrier board. + * + * Copyright (C) 2016 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/dts-v1/; + +#include "imx7d-tqma7.dtsi" +#include "imx7-mba7.dtsi" + +/ { + model = "TQ Systems TQMa7D board on MBa7 carrier board"; + compatible = "tq,imx7d-mba7", "fsl,imx7d"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + phy-reset-delay = <1>; + phy-supply = <®_fec2_pwdn>; + phy-handle = <ðphy2_0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy2_0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + /* LED1: Link/Activity, LED2: error */ + ti,led-function = <0x0db0>; + /* active low, LED1/2 driven by phy */ + ti,led-ctrl = <0x1001>; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_mba7_1>; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET2_MDIO 0x02 + MX7D_PAD_SD2_WP__ENET2_MDC 0x00 + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x71 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x71 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x71 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x71 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x71 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x71 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x79 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x79 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x79 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x79 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x79 + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x79 + /* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x40000070 + /* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */ + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x40000078 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* #pcie_wake */ + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x70 + /* #pcie_rst */ + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x70 + /* #pcie_dis */ + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x70 + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 + >; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + /* 1.5V logically from 3.3V */ + /* probe deferral not supported */ + /* pcie-bus-supply = <®_mpcie_1v5>; */ + reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>; + disable-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; + power-on-gpio = <&gpio2 30 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + vbus-supply = <®_usb_otg2_vbus>; + srp-disable; + hnp-disable; + adp-disable; + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index 3fd595a71202..6f50ebf31a0a 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -92,7 +92,7 @@ <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy0>; fsl,magic-packet; phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index aa9dbead4b8b..08ca1608fdb1 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2014-2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX7D_PINFUNC_H diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi new file mode 100644 index 000000000000..8ad3048dac0d --- /dev/null +++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Include file for TQ Systems TQMa7D board with NXP i.MX7Dual SoC. + * + * Copyright (C) 2016 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +#include "imx7d.dtsi" +#include "imx7-tqma7.dtsi" diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts new file mode 100644 index 000000000000..3e467a94e8a6 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts @@ -0,0 +1,941 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device tree file for ZII's RPU2 board + * + * RPU - Remote Peripheral Unit + * + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; +#include <dt-bindings/thermal/thermal.h> +#include "imx7d.dtsi" + +/ { + model = "ZII RPU2 Board"; + compatible = "zii,imx7d-rpu2", "fsl,imx7d"; + + chosen { + stdout-path = &uart1; + }; + + cs2000_ref: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + cs2000_in_dummy: dummy-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + debug { + label = "zii:green:debug1"; + gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc2 1>; + }; + + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_stby>; + regulator-name = "can1-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2_stby>; + regulator-name = "can2-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "GEN_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v_main: regulator-5p0v-main { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + sound1 { + compatible = "simple-audio-card"; + simple-audio-card,name = "Audio Output 1"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound1_codec>; + simple-audio-card,frame-master = <&sound1_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT", + "LEFTIN", "HPL", + "RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa1>; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + sound1_codec: simple-audio-card,codec { + sound-dai = <&codec1>; + clocks = <&cs2000>; + }; + }; + + sound2 { + compatible = "simple-audio-card"; + simple-audio-card,name = "Audio Output 2"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound2_codec>; + simple-audio-card,frame-master = <&sound2_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT", + "LEFTIN", "HPL", + "RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa2>; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + sound2_codec: simple-audio-card,codec { + sound-dai = <&codec2>; + clocks = <&cs2000>; + }; + }; + + sound3 { + compatible = "simple-audio-card"; + simple-audio-card,name = "Audio Output 3"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound3_codec>; + simple-audio-card,frame-master = <&sound3_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT", + "LEFTIN", "HPL", + "RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa3>; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + sound3_codec: simple-audio-card,codec { + sound-dai = <&codec3>; + clocks = <&cs2000>; + }; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&adc2 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; +}; + +&clks { + assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <884736000>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch: switch@0 { + compatible = "marvell,mv88e6085"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + reg = <0>; + eeprom-length = <512>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "eth_cu_1000_1"; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_2"; + }; + + port@2 { + reg = <2>; + label = "pic"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&fec1>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "gigabit_proc"; + ethernet = <&fec2>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + fsl,magic-packet; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>; + + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", + "usb_1_en_b", + "usb_2_en_b", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio2>; + + gpio-line-names = "12v_out_en_1", + "12v_out_en_2", + "12v_out_en_3", + "28v_out_en_5", + "28v_out_en_1", + "28v_out_en_2", + "28v_out_en_3", + "28v_out_en_4", + "", "", + "usb_3_en_b", + "usb_4_en_b", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + cs2000: clkgen@4e { + compatible = "cirrus,cs2000-cp"; + reg = <0x4e>; + #clock-cells = <0>; + clock-names = "clk_in", "ref_clk"; + clocks = <&cs2000_in_dummy>, <&cs2000_ref>; + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24000000>; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec2: codec@18 { + compatible = "ti,tlv320dac3100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec2>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <®_3p3v>; + SPRVDD-supply = <®_3p3v>; + SPLVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <&vgen4_reg>; + gpio-reset = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + hpa2: amp@60 { + compatible = "ti,tpa6130a2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpa2>; + reg = <0x60>; + power-gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_5p0v_main>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + codec3: codec@18 { + compatible = "ti,tlv320dac3100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec3>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <®_3p3v>; + SPRVDD-supply = <®_3p3v>; + SPLVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <&vgen4_reg>; + gpio-reset = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + hpa3: amp@60 { + compatible = "ti,tpa6130a2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpa3>; + reg = <0x60>; + power-gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_5p0v_main>; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + codec1: codec@18 { + compatible = "ti,tlv320dac3100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec1>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <®_3p3v>; + SPRVDD-supply = <®_3p3v>; + SPLVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <&vgen4_reg>; + gpio-reset = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + + hpa1: amp@60 { + compatible = "ti,tpa6130a2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpa1>; + reg = <0x60>; + power-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_5p0v_main>; + }; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX7D_SAI2_ROOT_SRC>, + <&clks IMX7D_SAI2_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>, + <&clks IMX7D_SAI3_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + no-1-8-v; + no-sdio; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sdio; + no-sd; + keep-power-in-suspend; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x2 + MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x2 + MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x2 + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x59 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 + MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT 0x1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x59 + MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x59 + >; + }; + + pinctrl_flexcan1_stby: flexcan1stbygrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x59 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59 + >; + }; + + pinctrl_flexcan2_stby: flexcan2stbygrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 + >; + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x00 + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x00 + >; + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x00 + MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x00 + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x00 + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x03 + MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x03 + MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x03 + MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x03 + MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x03 + MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x00 + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x00 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x4000007f + MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x4000007f + MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x4000007f + MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f + MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = < + MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x4000007f + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x4000007f + >; + }; + + pinctrl_leds_debug: debuggrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x59 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f + MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x30 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f + MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f + MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f + MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f + MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30 + >; + }; + + pinctrl_tpa1: tpa6130-1grp { + fsl,pins = < + MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x40000038 + >; + }; + + pinctrl_tpa2: tpa6130-2grp { + fsl,pins = < + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x40000038 + >; + }; + + pinctrl_tpa3: tpa6130-3grp { + fsl,pins = < + MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x40000038 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79 + MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX7D_PAD_SD2_DATA0__UART4_DCE_RX 0x79 + MX7D_PAD_SD2_DATA1__UART4_DCE_TX 0x79 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x59 + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_codec1: dac1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x40000038 + >; + }; + + pinctrl_codec2: dac2grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x40000038 + >; + }; + + pinctrl_codec3: dac3grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x40000038 + >; + }; + + pinctrl_switch: switchgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x08 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 6b298e388f4b..f33b560821b8 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -96,6 +96,14 @@ }; }; +&aips2 { + pcie_phy: pcie-phy@306d0000 { + compatible = "fsl,imx7d-pcie-phy"; + reg = <0x306d0000 0x10000>; + status = "disabled"; + }; +}; + &aips3 { usbotg2: usb@30b20000 { compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; @@ -146,6 +154,7 @@ ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ num-lanes = <1>; + num-viewport = <4>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -173,6 +182,7 @@ <&src IMX7_RESET_PCIE_CTRL_APPS_EN>, <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>; reset-names = "pciephy", "apps", "turnoff"; + fsl,imx7d-pcie-phy = <&pcie_phy>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/imx7s-mba7.dts new file mode 100644 index 000000000000..a143d566a38b --- /dev/null +++ b/arch/arm/boot/dts/imx7s-mba7.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Source for TQ Systems TQMa7S board on MBa7 carrier board. + * + * Copyright (C) 2016 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/dts-v1/; + +#include "imx7s-tqma7.dtsi" +#include "imx7-mba7.dtsi" + +/ { + model = "TQ Systems TQMa7S board on MBa7 carrier board"; + compatible = "tq,imx7s-mba7", "fsl,imx7s"; +}; diff --git a/arch/arm/boot/dts/imx7s-tqma7.dtsi b/arch/arm/boot/dts/imx7s-tqma7.dtsi new file mode 100644 index 000000000000..5f5433eb7dd7 --- /dev/null +++ b/arch/arm/boot/dts/imx7s-tqma7.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Include file for TQ Systems TQMa7S board with NXP i.MX7Solo SoC. + * + * Copyright (C) 2016 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +#include "imx7s.dtsi" +#include "imx7-tqma7.dtsi" diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index 23431faecaf4..d6b4888fa686 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -55,6 +55,14 @@ regulator-always-on; }; + reg_peri_3p15v: regulator-peri-3p15v { + compatible = "regulator-fixed"; + regulator-name = "peri_3p15v_reg"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -77,6 +85,10 @@ assigned-clock-rates = <884736000>; }; +&csi { + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -121,6 +133,8 @@ swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; }; snvs_reg: vsnvs { @@ -178,6 +192,27 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ov2680: camera@36 { + compatible = "ovti,ov2680"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov2680>; + reg = <0x36>; + clocks = <&osc>; + clock-names = "xvclk"; + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + DOVDD-supply = <&sw2_reg>; + DVDD-supply = <&sw2_reg>; + AVDD-supply = <®_peri_3p15v>; + + port { + ov2680_to_mipi: endpoint { + remote-endpoint = <&mipi_from_sensor>; + clock-lanes = <0>; + data-lanes = <1>; + }; + }; + }; }; &i2c3 { @@ -211,6 +246,22 @@ }; }; +&mipi_csi { + clock-frequency = <166000000>; + fsl,csis-hs-settle = <3>; + status = "okay"; + + port@0 { + reg = <0>; + + mipi_from_sensor: endpoint { + remote-endpoint = <&ov2680_to_mipi>; + data-lanes = <1>; + }; + + }; +}; + &sai1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai1>; @@ -277,6 +328,10 @@ status = "okay"; }; +&video_mux { + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -331,6 +386,12 @@ >; }; + pinctrl_ov2680: ov2660grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x14 + >; + }; + pinctrl_sai1: sai1grp { fsl,pins = < MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index e88f53a4c7f4..106711d2c01b 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/imx7-reset.h> #include "imx7d-pinfunc.h" / { @@ -497,8 +498,43 @@ gpr: iomuxc-gpr@30340000 { compatible = "fsl,imx7d-iomuxc-gpr", - "fsl,imx6q-iomuxc-gpr", "syscon"; + "fsl,imx6q-iomuxc-gpr", "syscon", + "simple-mfd"; reg = <0x30340000 0x10000>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <0>; + mux-reg-masks = <0x14 0x00000010>; + }; + + video_mux: csi-mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + csi_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_csi_mux>; + }; + }; + + port@2 { + reg = <2>; + + csi_mux_to_csi: endpoint { + remote-endpoint = <&csi_from_csi_mux>; + }; + }; + }; }; ocotp: ocotp-ctrl@30350000 { @@ -606,7 +642,13 @@ #address-cells = <1>; #size-cells = <0>; - pgc_pcie_phy: pgc-power-domain@1 { + pgc_mipi_phy: power-domain@0 { + #power-domain-cells = <0>; + reg = <0>; + power-supply = <®_1p0d>; + }; + + pgc_pcie_phy: power-domain@1 { #power-domain-cells = <0>; reg = <1>; power-supply = <®_1p0d>; @@ -628,6 +670,7 @@ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_ADC_ROOT_CLK>; clock-names = "adc"; + #io-channel-cells = <1>; status = "disabled"; }; @@ -637,6 +680,7 @@ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_ADC_ROOT_CLK>; clock-names = "adc"; + #io-channel-cells = <1>; status = "disabled"; }; @@ -696,6 +740,23 @@ status = "disabled"; }; + csi: csi@30710000 { + compatible = "fsl,imx7-csi"; + reg = <0x30710000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CSI_MCLK_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "axi", "mclk", "dcic"; + status = "disabled"; + + port { + csi_from_csi_mux: endpoint { + remote-endpoint = <&csi_mux_to_csi>; + }; + }; + }; + lcdif: lcdif@30730000 { compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; reg = <0x30730000 0x10000>; @@ -705,6 +766,35 @@ clock-names = "pix", "axi"; status = "disabled"; }; + + mipi_csi: mipi-csi@30750000 { + compatible = "fsl,imx7-mipi-csi2"; + reg = <0x30750000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "pclk", "wrap", "phy"; + power-domains = <&pgc_mipi_phy>; + phy-supply = <®_1p0d>; + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; + reset-names = "mrst"; + status = "disabled"; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_vc0_to_csi_mux: endpoint { + remote-endpoint = <&csi_mux_from_mipi_vc0>; + }; + }; + }; }; aips3: aips-bus@30800000 { @@ -1067,8 +1157,8 @@ compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; reg = <0x30bd0000 0x10000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_SDMA_CORE_CLK>, - <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_SDMA_CORE_CLK>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; diff --git a/arch/arm/boot/dts/imx7ulp-pinfunc.h b/arch/arm/boot/dts/imx7ulp-pinfunc.h index 85f6b017803a..c0148d79b62d 100644 --- a/arch/arm/boot/dts/imx7ulp-pinfunc.h +++ b/arch/arm/boot/dts/imx7ulp-pinfunc.h @@ -1,11 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2016 Freescale Semiconductor, Inc. * Copyright 2017 NXP - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX7ULP_PINFUNC_H diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index 931b2754b099..d6b711011cba 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -199,9 +199,13 @@ assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; }; - smc1: smc1@40410000 { + smc1: clock-controller@40410000 { compatible = "fsl,imx7ulp-smc1"; reg = <0x40410000 0x1000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_CORE_DIV>, + <&scg1 IMX7ULP_CLK_HSRUN_CORE_DIV>; + clock-names = "divcore", "hsrun_divcore"; }; pcc3: clock-controller@40b30000 { @@ -282,6 +286,12 @@ status = "disabled"; }; + memory-controller@40ab0000 { + compatible = "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc"; + reg = <0x40ab0000 0x1000>; + clocks = <&pcc3 IMX7ULP_CLK_MMDC>; + }; + iomuxc1: pinctrl@40ac0000 { compatible = "fsl,imx7ulp-iomuxc1"; reg = <0x40ac0000 0x1000>; @@ -343,4 +353,23 @@ gpio-ranges = <&iomuxc1 0 96 32>; }; }; + + m4aips1: bus@41080000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x41080000 0x80000>; + ranges; + + sim: sim@410a3000 { + compatible = "fsl,imx7ulp-sim", "syscon"; + reg = <0x410a3000 0x1000>; + }; + + ocotp: ocotp-ctrl@410a6000 { + compatible = "fsl,imx7ulp-ocotp", "syscon"; + reg = <0x410a6000 0x4000>; + clocks = <&scg1 IMX7ULP_CLK_DUMMY>; + }; + }; }; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 4d58638d104b..1612a869a4f7 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -3,9 +3,15 @@ * SoC core Device Tree for the ARM Integrator platforms */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + core-module@10000000 { compatible = "arm,core-module-integrator", "syscon", "simple-mfd"; reg = <0x10000000 0x200>; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index a185ab8759fa..01fa229e1bd0 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -192,6 +192,43 @@ interrupts = <27>; }; + bridge { + compatible = "ti,ths8134a", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads_vga_dac>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + fpga { /* * These PrimeCells are at the same location and using @@ -254,39 +291,27 @@ interrupts = <22>; clocks = <&auxosc>, <&pclk>; clock-names = "clcdclk", "apb_pclk"; + /* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */ + max-memory-bandwidth = <40000000>; - port { - /* - * The VGA connected is implemented with a - * THS8134A triple DAC that can be run in 24bit - * or 16bit RGB mode. - */ - clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; - arm,pl11x,tft-r0g0b0-pads = <1 7 13>; - }; - }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - /* Standard 640x480 VGA timings */ - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <48>; - hfront-porch = <16>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <33>; - vfront-porch = <10>; - vsync-len = <2>; + /* + * This port is routed through a PLD (Programmable + * Logic Device) that routes the output from the CLCD + * (after transformations) to the VGA DAC and also an + * external panel connector. The PLD is essential for + * supporting RGB565/BGR565. + * + * The signals from the port thus reaches two endpoints. + * The PLD is managed through a few special bits in the + * FPGA "sysreg". + * + * This arrangement can be clearly seen in + * ARM DUI 0225D, page 3-41, figure 3-19. + */ + port@0 { + clcd_pads_vga_dac: endpoint { + remote-endpoint = <&vga_bridge_in>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; }; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts new file mode 100644 index 000000000000..8fcd95805ff4 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Linksys NSLU2 + */ + +/dts-v1/; + +#include "intel-ixp42x.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives)"; + compatible = "linksys,nslu2", "intel,ixp42x"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 32 MB SDRAM */ + device_type = "memory"; + reg = <0x00000000 0x2000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait"; + stdout-path = "uart0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; + + leds { + compatible = "gpio-leds"; + led-status { + label = "nslu2:red:status"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + led-ready { + label = "nslu2:green:ready"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + led-disk-1 { + label = "nslu2:green:disk-1"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led-disk-2 { + label = "nslu2:green:disk-2"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-power { + wakeup-source; + linux,code = <KEY_POWER>; + label = "power"; + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + }; + button-reset { + wakeup-source; + linux,code = <KEY_ESC>; + label = "reset"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + }; + + i2c { + compatible = "i2c-gpio"; + sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6f { + compatible = "xicor,x1205"; + reg = <0x6f>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + timeout-ms = <5000>; + }; + + /* The first 16MB region on the expansion bus */ + flash@50000000 { + compatible = "intel,ixp4xx-flash", "cfi-flash"; + bank-width = <2>; + /* + * 8 MB of Flash in 0x20000 byte blocks + * mapped in at 0x50000000 + */ + reg = <0x50000000 0x800000>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0x7e0000 */ + fis-index-block = <0x3f>; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi new file mode 100644 index 000000000000..a9622ca850cc --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp42x.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP 42x series. This series has 32 interrupts. + */ +#include "intel-ixp4xx.dtsi" + +/ { + soc { + interrupt-controller@c8003000 { + compatible = "intel,ixp42x-interrupt"; + }; + + /* + * This is the USB Device Mode (UDC) controller, which is used + * to present the IXP4xx as a device on a USB bus. + */ + usb@c800b000 { + compatible = "intel,ixp4xx-udc"; + reg = <0xc800b000 0x1000>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts new file mode 100644 index 000000000000..ba1163a1e1e7 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Gateworks IXP43x-based Cambria GW2358 + */ + +/dts-v1/; + +#include "intel-ixp43x.dtsi" + +/ { + model = "Gateworks Cambria GW2358"; + compatible = "gateworks,gw2358", "intel,ixp43x"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB SDRAM */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait"; + stdout-path = "uart0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; + + leds { + compatible = "gpio-leds"; + led-user { + label = "gw2358:green:LED"; + gpios = <&pld1 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + + i2c { + compatible = "i2c-gpio"; + sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + + hwmon@28 { + compatible = "adi,ad7418"; + reg = <0x28>; + }; + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; + eeprom@51 { + compatible = "atmel,24c08"; + reg = <0x51>; + pagesize = <16>; + size = <1024>; + read-only; + }; + pld0: pld@56 { + compatible = "gateworks,pld-gpio"; + reg = <0x56>; + gpio-controller; + #gpio-cells = <2>; + }; + /* This PLD just handles the LED and user button */ + pld1: pld@57 { + compatible = "gateworks,pld-gpio"; + reg = <0x57>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + flash@50000000 { + compatible = "intel,ixp4xx-flash", "cfi-flash"; + bank-width = <2>; + /* + * 32 MB of Flash in 0x20000 byte blocks + * mapped in at 0x50000000 + */ + reg = <0x50000000 0x2000000>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0x1fe0000 */ + fis-index-block = <0xff>; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel-ixp43x.dtsi new file mode 100644 index 000000000000..494fb2ff57a0 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp43x.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP 43x series. This series has 64 interrupts and adds a few more + * peripherals over the 42x series. + */ +#include "intel-ixp4xx.dtsi" + +/ { + soc { + interrupt-controller@c8003000 { + compatible = "intel,ixp43x-interrupt"; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi new file mode 100644 index 000000000000..f8cd506659dc --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP45x and IXP46x series. This series has 64 interrupts and adds a + * few more peripherals over the 42x and 43x series so this extends the + * basic IXP4xx DTSI. + */ +#include "intel-ixp4xx.dtsi" + +/ { + soc { + interrupt-controller@c8003000 { + compatible = "intel,ixp43x-interrupt"; + }; + + /* + * This is the USB Device Mode (UDC) controller, which is used + * to present the IXP4xx as a device on a USB bus. + */ + usb@c800b000 { + compatible = "intel,ixp4xx-udc"; + reg = <0xc800b000 0x1000>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c@c8011000 { + compatible = "intel,ixp4xx-i2c"; + reg = <0xc8011000 0x18>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi new file mode 100644 index 000000000000..d4a09584f417 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP 4xx series. + */ +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + interrupt-parent = <&intcon>; + + qmgr: queue-manager@60000000 { + compatible = "intel,ixp4xx-ahb-queue-manager"; + reg = <0x60000000 0x4000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + }; + + uart0: serial@c8000000 { + compatible = "intel,xscale-uart"; + reg = <0xc8000000 0x1000>; + /* + * The reg-offset and reg-shift is a side effect + * of running the platform in big endian mode. + */ + reg-offset = <3>; + reg-shift = <2>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <14745600>; + no-loopback-test; + }; + + gpio0: gpio@c8004000 { + compatible = "intel,ixp4xx-gpio"; + reg = <0xc8004000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + intcon: interrupt-controller@c8003000 { + /* + * Note: no compatible string. The subvariant of the + * chip needs to define what version it is. The + * location of the interrupt controller is fixed in + * memory across all variants. + */ + reg = <0xc8003000 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + timer@c8005000 { + compatible = "intel,ixp4xx-timer"; + reg = <0xc8005000 0x100>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + }; + + npe@c8006000 { + compatible = "intel,ixp4xx-network-processing-engine"; + reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index 31ceacd841de..b3ad3f607d31 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -190,53 +190,6 @@ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð0port>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0>; /* MDIO address 0, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan4"; - }; - - port@1 { - reg = <1>; - label = "lan3"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@6 { - reg = <6>; - label = "cpu"; - }; - }; - }; }; &mdio { diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts index a7d659b7145a..2f9660f3b457 100644 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -66,53 +66,6 @@ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð0port>; - dsa,mii-bus = <&mdio>; - - switch@16,0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <16 0>; /* MDIO address 16, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "ethernet1"; - }; - - port@1 { - reg = <1>; - label = "ethernet2"; - }; - - port@2 { - reg = <2>; - label = "ethernet3"; - }; - - port@3 { - reg = <3>; - label = "ethernet4"; - }; - - port@4 { - reg = <4>; - label = "internet"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &pinctrl { diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 86d532916d56..2e1a75348908 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -107,53 +107,6 @@ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <1>; - #size-cells = <0>; - - dsa,ethernet = <ð0port>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0>; /* MDIO address 0, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan1"; - }; - - port@1 { - reg = <1>; - label = "lan2"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan4"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &mdio { diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts index a9fee2c2bcaf..9d88301daf0e 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts @@ -16,15 +16,6 @@ model = "Marvell RD88f6281 Reference design, with Z0 SoC"; compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - dsa { - switch@0 { - reg = <0 0>; /* MDIO address 0, switch 0 in tree */ - port@4 { - reg = <4>; - label = "wan"; - }; - }; - }; }; ð1 { diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index 0f22f0e6f56b..f1f8eee132e8 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -48,47 +48,6 @@ cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; /* No WP GPIO */ }; - }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð0port>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan1"; - }; - - port@1 { - reg = <1>; - label = "lan2"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan4"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 81c7eda2c442..2161e23bd98e 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -1,11 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -/include/ "skeleton.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index 32d0dc371fc3..f7a841a28865 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index 24283739526c..a604d92221a4 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi index 4990ed90dcea..100396f6c2fe 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only / { gpio_keys { @@ -153,7 +149,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ - cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */ + cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* gpio_110 */ vmmc-supply = <&vmmc1>; bus-width = <4>; cap-power-off-card; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 98b682a8080c..5563ee54c960 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts index d7cb659656ce..7675bc3fa868 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index c39cf2ca54da..18c27e85051f 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index 86c5644f558c..642e809e757a 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only / { gpio_keys { diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 7d2302e8706c..3fdd0a72f87f 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts index 58ea0a4e7afa..63c6f17bb7c9 100644 --- a/arch/arm/boot/dts/lpc3250-ea3250.dts +++ b/arch/arm/boot/dts/lpc3250-ea3250.dts @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Embedded Artists LPC3250 board * * Copyright 2012 Roland Stigge <stigge@antcom.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; @@ -17,64 +11,70 @@ / { model = "Embedded Artists LPC3250 board based on NXP LPC3250"; compatible = "ea,ea3250", "nxp,lpc3250"; - #address-cells = <1>; - #size-cells = <1>; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x4000000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@21 { + + button { label = "Interrupt Key"; linux,code = <103>; gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ }; + key1 { label = "KEY1"; linux,code = <1>; gpios = <&pca9532 0 0>; }; + key2 { label = "KEY2"; linux,code = <2>; gpios = <&pca9532 1 0>; }; + key3 { label = "KEY3"; linux,code = <3>; gpios = <&pca9532 2 0>; }; + key4 { label = "KEY4"; linux,code = <4>; gpios = <&pca9532 3 0>; }; + joy0 { label = "Joystick Key 0"; linux,code = <10>; gpios = <&gpio 2 0 0>; /* P2.0 */ }; + joy1 { label = "Joystick Key 1"; linux,code = <11>; gpios = <&gpio 2 1 0>; /* P2.1 */ }; + joy2 { label = "Joystick Key 2"; linux,code = <12>; gpios = <&gpio 2 2 0>; /* P2.2 */ }; + joy3 { label = "Joystick Key 3"; linux,code = <13>; gpios = <&gpio 2 3 0>; /* P2.3 */ }; + joy4 { label = "Joystick Key 4"; linux,code = <14>; @@ -195,6 +195,7 @@ &mac { phy-mode = "rmii"; use-iram; + status = "okay"; }; /* Here, choose exactly one from: ohci, usbd */ diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts index 1e1c2f517a82..21a6d0bca1e8 100644 --- a/arch/arm/boot/dts/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -1,14 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * PHYTEC phyCORE-LPC3250 board * + * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com> * Copyright 2012 Roland Stigge <stigge@antcom.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; @@ -17,45 +12,12 @@ / { model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250"; compatible = "phytec,phy3250", "nxp,lpc3250"; - #address-cells = <1>; - #size-cells = <1>; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x4000000>; }; - regulators { - backlight_reg: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "backlight_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 4 0>; - enable-active-high; - regulator-boot-on; - }; - - lcd_reg: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "lcd_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 0 0>; - enable-active-high; - regulator-boot-on; - }; - - sd_reg: regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "sd_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 5 0>; - enable-active-high; - }; - }; - leds { compatible = "gpio-leds"; @@ -69,10 +31,59 @@ linux,default-trigger = "heartbeat"; }; }; + + panel: panel { + compatible = "sharp,lq035q7db03"; + power-supply = <®_lcd>; + + port { + panel_input: endpoint { + remote-endpoint = <&cldc_output>; + }; + }; + }; + + reg_backlight: regulator-backlight { + compatible = "regulator-fixed"; + regulator-name = "backlight"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 4 0>; + enable-active-high; + regulator-boot-on; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 0 0>; + enable-active-high; + regulator-boot-on; + }; + + reg_sd: regulator-sd { + compatible = "regulator-fixed"; + regulator-name = "sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 5 5 0>; + enable-active-high; + regulator-boot-on; + }; }; &clcd { + max-memory-bandwidth = <18710000>; status = "okay"; + + port { + cldc_output: endpoint { + remote-endpoint = <&panel_input>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; }; &i2c1 { @@ -117,6 +128,7 @@ &mac { phy-mode = "rmii"; use-iram; + status = "okay"; }; /* Here, choose exactly one from: ohci, usbd */ @@ -130,7 +142,7 @@ cd-gpios = <&gpio 3 1 0>; cd-inverted; bus-width = <4>; - vmmc-supply = <&sd_reg>; + vmmc-supply = <®_sd>; status = "okay"; }; @@ -184,8 +196,6 @@ }; &ssp0 { - #address-cells = <1>; - #size-cells = <0>; num-cs = <1>; cs-gpios = <&gpio 3 5 0>; status = "okay"; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index b7303a4e4236..7b7ec7b1217b 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -1,22 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * NXP LPC32xx SoC * + * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com> * Copyright 2012 Roland Stigge <stigge@antcom.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" - #include <dt-bindings/clock/lpc32xx-clock.h> #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; compatible = "nxp,lpc3220"; interrupt-parent = <&mic>; @@ -139,11 +134,11 @@ }; clcd: clcd@31040000 { - compatible = "arm,pl110", "arm,primecell"; + compatible = "arm,pl111", "arm,primecell"; reg = <0x31040000 0x1000>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk LPC32XX_CLK_LCD>; - clock-names = "apb_pclk"; + clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>; + clock-names = "clcdclk", "apb_pclk"; status = "disabled"; }; @@ -152,6 +147,7 @@ reg = <0x31060000 0x1000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_MAC>; + status = "disabled"; }; emc: memory-controller@31080000 { @@ -185,6 +181,8 @@ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_SSP0>; clock-names = "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -192,6 +190,8 @@ compatible = "nxp,lpc3220-spi"; reg = <0x20088000 0x1000>; clocks = <&clk LPC32XX_CLK_SPI1>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -205,6 +205,8 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_SSP1>; clock-names = "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -212,12 +214,15 @@ compatible = "nxp,lpc3220-spi"; reg = <0x20090000 0x1000>; clocks = <&clk LPC32XX_CLK_SPI2>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; i2s0: i2s@20094000 { compatible = "nxp,lpc3220-i2s"; reg = <0x20094000 0x1000>; + status = "disabled"; }; sd: sd@20098000 { @@ -230,9 +235,10 @@ status = "disabled"; }; - i2s1: i2s@2009C000 { + i2s1: i2s@2009c000 { compatible = "nxp,lpc3220-i2s"; - reg = <0x2009C000 0x1000>; + reg = <0x2009c000 0x1000>; + status = "disabled"; }; /* UART5 first since it is the default console, ttyS0 */ @@ -273,9 +279,9 @@ status = "disabled"; }; - i2c1: i2c@400A0000 { + i2c1: i2c@400a0000 { compatible = "nxp,pnx-i2c"; - reg = <0x400A0000 0x100>; + reg = <0x400a0000 0x100>; interrupt-parent = <&sic1>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; @@ -284,9 +290,9 @@ clocks = <&clk LPC32XX_CLK_I2C1>; }; - i2c2: i2c@400A8000 { + i2c2: i2c@400a8000 { compatible = "nxp,pnx-i2c"; - reg = <0x400A8000 0x100>; + reg = <0x400a8000 0x100>; interrupt-parent = <&sic1>; interrupts = <18 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; @@ -295,9 +301,9 @@ clocks = <&clk LPC32XX_CLK_I2C2>; }; - mpwm: mpwm@400E8000 { + mpwm: mpwm@400e8000 { compatible = "nxp,lpc3220-motor-pwm"; - reg = <0x400E8000 0x78>; + reg = <0x400e8000 0x78>; status = "disabled"; #pwm-cells = <2>; }; @@ -394,9 +400,9 @@ #gpio-cells = <3>; /* bank, pin, flags */ }; - timer4: timer@4002C000 { + timer4: timer@4002c000 { compatible = "nxp,lpc3220-timer"; - reg = <0x4002C000 0x1000>; + reg = <0x4002c000 0x1000>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; clocks = <&clk LPC32XX_CLK_TIMER4>; clock-names = "timerclk"; @@ -412,9 +418,9 @@ status = "disabled"; }; - watchdog: watchdog@4003C000 { + watchdog: watchdog@4003c000 { compatible = "nxp,pnx4008-wdt"; - reg = <0x4003C000 0x1000>; + reg = <0x4003c000 0x1000>; clocks = <&clk LPC32XX_CLK_WDOG>; }; @@ -451,9 +457,9 @@ status = "disabled"; }; - timer1: timer@4004C000 { + timer1: timer@4004c000 { compatible = "nxp,lpc3220-timer"; - reg = <0x4004C000 0x1000>; + reg = <0x4004c000 0x1000>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; clocks = <&clk LPC32XX_CLK_TIMER1>; clock-names = "timerclk"; @@ -462,7 +468,9 @@ key: key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; - interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_KEY>; + interrupt-parent = <&sic1>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -475,18 +483,18 @@ status = "disabled"; }; - pwm1: pwm@4005C000 { + pwm1: pwm@4005c000 { compatible = "nxp,lpc3220-pwm"; - reg = <0x4005C000 0x4>; + reg = <0x4005c000 0x4>; clocks = <&clk LPC32XX_CLK_PWM1>; assigned-clocks = <&clk LPC32XX_CLK_PWM1>; assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; status = "disabled"; }; - pwm2: pwm@4005C004 { + pwm2: pwm@4005c004 { compatible = "nxp,lpc3220-pwm"; - reg = <0x4005C004 0x4>; + reg = <0x4005c004 0x4>; clocks = <&clk LPC32XX_CLK_PWM2>; assigned-clocks = <&clk LPC32XX_CLK_PWM2>; assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index 8b973f537d3a..93d0c2e99e7c 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -40,8 +40,6 @@ pca_buttons { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; autorepeat; diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts index 02b23fa29d75..224f80a4a31d 100644 --- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -57,8 +57,6 @@ compatible = "gpio-keys-polled"; pinctrl-names = "default"; pinctrl-0 = <&gpio_joystick_pins>; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; autorepeat; diff --git a/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts new file mode 100644 index 000000000000..1f84654df50c --- /dev/null +++ b/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts @@ -0,0 +1,619 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * MYIR Tech MYD-LPC4357 Development Board with 800x480 7" TFT panel + * + * Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com> + */ + +/dts-v1/; + +#include "lpc18xx.dtsi" +#include "lpc4357.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "MYIR Tech LPC4357 Development Board"; + compatible = "myir,myd-lpc4357", "nxp,lpc4357"; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + memory@28000000 { + device_type = "memory"; + reg = <0x28000000 0x2000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led1 { + gpios = <&gpio LPC_GPIO(6,15) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + gpios = <&gpio LPC_GPIO(6,16) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + gpios = <&gpio LPC_GPIO(6,17) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led4 { + gpios = <&gpio LPC_GPIO(6,10) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led5 { + gpios = <&gpio LPC_GPIO(7,14) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led6 { + gpios = <&gpio LPC_GPIO(6,14) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + panel: panel { + compatible = "innolux,at070tn92"; + + port { + panel_input: endpoint { + remote-endpoint = <&lcdc_output>; + }; + }; + }; + + vcc: vcc_fixed { + compatible = "regulator-fixed"; + regulator-name = "vcc-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vmmc: vmmc_fixed { + compatible = "regulator-fixed"; + regulator-name = "vmmc-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&pinctrl { + can0_pins: can0-pins { + can_rd_cfg { + pins = "p3_1"; + function = "can0"; + input-enable; + }; + + can_td_cfg { + pins = "p3_2"; + function = "can0"; + }; + }; + + can1_pins: can1-pins { + can_rd_cfg { + pins = "pe_1"; + function = "can1"; + input-enable; + }; + + can_td_cfg { + pins = "pe_0"; + function = "can1"; + }; + }; + + emc_pins: emc-pins { + emc_addr0_22_cfg { + pins = "p2_9", "p2_10", "p2_11", "p2_12", + "p2_13", "p1_0", "p1_1", "p1_2", + "p2_8", "p2_7", "p2_6", "p2_2", + "p2_1", "p2_0", "p6_8", "p6_7", + "pd_16", "pd_15", "pe_0", "pe_1", + "pe_2", "pe_3", "pe_4"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_data0_15_cfg { + pins = "p1_7", "p1_8", "p1_9", "p1_10", + "p1_11", "p1_12", "p1_13", "p1_14", + "p5_4", "p5_5", "p5_6", "p5_7", + "p5_0", "p5_1", "p5_2", "p5_3"; + function = "emc"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + emc_we_oe_cfg { + pins = "p1_6", "p1_3"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_cs0_cfg { + pins = "p1_5"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_dqm0_1_cfg { + pins = "p6_12", "p6_10"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_ras_cas_cfg { + pins = "p6_5", "p6_4"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_dycs0_cfg { + pins = "p6_9"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_cke_cfg { + pins = "p6_11"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_clock_cfg { + pins = "clk0"; + function = "emc"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + }; + + enet_rmii_pins: enet-rmii-pins { + enet_rmii_rxd_cfg { + pins = "p1_15", "p0_0"; + function = "enet"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + enet_rmii_txd_cfg { + pins = "p1_18", "p1_20"; + function = "enet"; + slew-rate = <1>; + bias-disable; + }; + + enet_rmii_rx_dv_cfg { + pins = "p1_16"; + function = "enet"; + input-enable; + input-schmitt-disable; + bias-disable; + }; + + enet_mdio_cfg { + pins = "p1_17"; + function = "enet"; + input-enable; + input-schmitt-disable; + bias-disable; + }; + + enet_mdc_cfg { + pins = "pc_1"; + function = "enet"; + slew-rate = <1>; + bias-disable; + }; + + enet_rmii_tx_en_cfg { + pins = "p0_1"; + function = "enet"; + bias-disable; + }; + + enet_ref_clk_cfg { + pins = "p1_19"; + function = "enet"; + slew-rate = <1>; + input-enable; + input-schmitt-disable; + bias-disable; + }; + }; + + i2c0_pins: i2c0-pins { + i2c0_pins_cfg { + pins = "i2c0_scl", "i2c0_sda"; + function = "i2c0"; + input-enable; + }; + }; + + i2c1_pins: i2c1-pins { + i2c1_pins_cfg { + pins = "pe_15", "pe_13"; + function = "i2c1"; + input-enable; + }; + }; + + lcd_pins: lcd-pins { + lcd_vd0_23_cfg { + pins = "p4_1", "p4_4", "p4_3", "p4_2", + "p8_7", "p8_6", "p8_5", "p8_4", + "p7_5", "p4_8", "p4_10", "p4_9", + "p8_3", "pb_6", "pb_5", "pb_4", + "p7_4", "p7_3", "p7_2", "p7_1", + "pb_3", "pb_2", "pb_1", "pb_0"; + function = "lcd"; + }; + + lcd_vsync_en_dclk_lp_pwr_cfg { + pins = "p4_5", "p4_6", "p4_7", "p7_6", "p7_7"; + function = "lcd"; + }; + }; + + led_pins: led-pins { + led_1_6_cfg { + pins = "pd_1", "pd_2", "pd_3", "pc_11", "pe_14", "pd_0"; + function = "gpio"; + bias-pull-down; + }; + }; + + sdmmc_pins: sdmmc-pins { + sdmmc_clk_cfg { + pins = "pc_0"; + function = "sdmmc"; + slew-rate = <1>; + bias-pull-down; + }; + + sdmmc_cmd_dat0_3_cfg { + pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10"; + function = "sdmmc"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + sdmmc_cd_cfg { + pins = "pc_8"; + function = "sdmmc"; + input-enable; + bias-pull-down; + }; + }; + + spifi_pins: spifi-pins { + spifi_sck_cfg { + pins = "p3_3"; + function = "spifi"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + spifi_mosi_miso_sio2_sio3_cfg { + pins = "p3_7", "p3_6", "p3_5", "p3_4"; + function = "spifi"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + spifi_cs_cfg { + pins = "p3_8"; + function = "spifi"; + bias-disable; + }; + }; + + ssp1_pins: ssp1-pins { + ssp1_sck_cfg { + pins = "pf_4"; + function = "ssp1"; + slew-rate = <1>; + bias-pull-down; + }; + + ssp1_miso_cfg { + pins = "pf_6"; + function = "ssp1"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-pull-down; + }; + + ssp1_mosi_cfg { + pins = "pf_7"; + function = "ssp1"; + slew-rate = <1>; + bias-pull-down; + }; + + ssp1_ssel_cfg { + pins = "pf_5"; + function = "gpio"; + bias-disable; + }; + }; + + uart0_pins: uart0-pins { + uart0_rxd_cfg { + pins = "pf_11"; + function = "uart0"; + input-enable; + input-schmitt-disable; + bias-disable; + }; + + uart0_clk_dir_txd_cfg { + pins = "pf_8", "pf_9", "pf_10"; + function = "uart0"; + bias-pull-down; + }; + }; + + uart1_pins: uart1-pins { + uart1_rxd_cfg { + pins = "pc_14"; + function = "uart1"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + uart1_dtr_txd_cfg { + pins = "pc_12", "pc_13"; + function = "uart1"; + bias-pull-down; + }; + }; + + uart2_pins: uart2-pins { + uart2_rxd_cfg { + pins = "pa_2"; + function = "uart2"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + uart2_txd_cfg { + pins = "pa_1"; + function = "uart2"; + bias-pull-down; + }; + }; + + uart3_pins: uart3-pins { + uart3_rx_cfg { + pins = "p2_4"; + function = "uart3"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + uart3_tx_cfg { + pins = "p2_3"; + function = "uart3"; + bias-pull-down; + }; + }; + + usb0_pins: usb0-pins { + usb0_pwr_enable_cfg { + pins = "p6_3"; + function = "usb0"; + }; + + usb0_pwr_fault_cfg { + pins = "p8_0"; + function = "usb0"; + bias-disable; + input-enable; + }; + }; +}; + +&adc1 { + status = "okay"; + vref-supply = <&vcc>; +}; + +&can0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins>; +}; + +/* Pin conflict with EMC, muxed by JP5 and JP6 */ +&can1 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins>; +}; + +&emc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&emc_pins>; + + cs0 { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + mpmc,cs = <0>; + mpmc,memory-width = <16>; + mpmc,byte-lane-low; + mpmc,write-enable-delay = <0>; + mpmc,output-enable-delay = <0>; + mpmc,read-access-delay = <70>; + mpmc,page-mode-read-delay = <70>; + + /* SST/Microchip SST39VF1601 */ + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x400000>; + bank-width = <2>; + }; + }; +}; + +&enet_tx_clk { + clock-frequency = <50000000>; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + sensor@49 { + compatible = "lm75"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + }; +}; + +&lcdc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + max-memory-bandwidth = <92240000>; + + port { + lcdc_output: endpoint { + remote-endpoint = <&panel_input>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; +}; + +&mac { + status = "okay"; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&enet_rmii_pins>; + phy-handle = <&phy1>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&mmcsd { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pins>; + bus-width = <4>; + vmmc-supply = <&vmmc>; +}; + +/* Pin conflict with SSP0, the latter is routed to J17 pin header */ +&spifi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spifi_pins>; + + /* Atmel AT25DF321A */ + flash { + compatible = "jedec,spi-nor"; + spi-max-frequency = <51000000>; + spi-cpol; + spi-cpha; + }; +}; + +&ssp1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp1_pins>; + num-cs = <1>; + cs-gpios = <&gpio LPC_GPIO(7,19) GPIO_ACTIVE_LOW>; +}; + +/* Routed to J17 pin header */ +&uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +/* RS485 */ +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +/* Routed to J17 pin header */ +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; +}; diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts index 6a83f30029ea..f3ddea934f1b 100644 --- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2017 Moxa Inc. - https://www.moxa.com/ * * Author: Harry YJ Jhou (周亞諄) <harryyj.jhou@moxa.com> * Jimmy Chen (陳永達) <jimmy.chen@moxa.com> * SZ Lin (林上智) <sz.lin@moxa.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -18,6 +15,7 @@ / { model = "Moxa UC-8410A"; + compatible = "fsl,ls1021a-moxa-uc-8410a", "fsl,ls1021a"; aliases { enet0_rgmii_phy = &rgmii_phy0; @@ -203,7 +201,6 @@ }; &qspi { - fsl,qspi-has-second-chip; status = "okay"; flash: flash@0 { diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts index 923a25760516..74a67604876c 100644 --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -51,6 +51,7 @@ / { model = "LS1021A QDS Board"; + compatible = "fsl,ls1021a-qds", "fsl,ls1021a"; aliases { enet0_rgmii_phy = &rgmii_phy1; @@ -145,6 +146,10 @@ status = "okay"; }; +&esdhc { + status = "okay"; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index 8b48c3c7cd21..9b1fe99d55b1 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -51,6 +51,7 @@ / { model = "LS1021A TWR Board"; + compatible = "fsl,ls1021a-twr", "fsl,ls1021a"; aliases { enet2_rgmii_phy = &rgmii_phy1; @@ -144,7 +145,7 @@ }; &enet0 { - tbi-handle = <&tbi1>; + tbi-handle = <&tbi0>; phy-handle = <&sgmii_phy2>; phy-connection-type = "sgmii"; status = "okay"; @@ -224,6 +225,13 @@ sgmii_phy2: ethernet-phy@2 { reg = <0x2>; }; + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { tbi1: tbi-phy@1f { reg = <0x1f>; device_type = "tbi-phy"; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index ed0941292172..464df4290ffc 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -45,11 +45,12 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton64.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> / { + #address-cells = <2>; + #size-cells = <2>; compatible = "fsl,ls1021a"; interrupt-parent = <&gic>; @@ -88,6 +89,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; + }; + sysclk: sysclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -125,6 +131,13 @@ interrupt-parent = <&gic>; ranges; + ddr: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + big-endian; + }; + gic: interrupt-controller@1400000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; @@ -173,7 +186,6 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; clocks = <&clockgen 4 1>, <&clockgen 4 1>; - big-endian; status = "disabled"; }; @@ -433,6 +445,34 @@ status = "disabled"; }; + counter0: counter@29d0000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x0 0x29d0000 0x0 0x10000>; + big-endian; + status = "disabled"; + }; + + counter1: counter@29e0000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x0 0x29e0000 0x0 0x10000>; + big-endian; + status = "disabled"; + }; + + counter2: counter@29f0000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x0 0x29f0000 0x0 0x10000>; + big-endian; + status = "disabled"; + }; + + counter3: counter@2a00000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x0 0x2a00000 0x0 0x10000>; + big-endian; + status = "disabled"; + }; + gpio0: gpio@2300000 { compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; @@ -688,7 +728,7 @@ }; mdio0: mdio@2d24000 { - compatible = "gianfar"; + compatible = "fsl,etsec2-mdio"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; @@ -696,6 +736,15 @@ <0x0 0x2d10030 0x0 0x4>; }; + mdio1: mdio@2d64000 { + compatible = "fsl,etsec2-mdio"; + device_type = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2d64000 0x0 0x4000>, + <0x0 0x2d50030 0x0 0x4>; + }; + ptp_clock@2d10e00 { compatible = "fsl,etsec-ptp"; reg = <0x0 0x2d10e00 0x0 0xb0>; @@ -706,6 +755,7 @@ fsl,tmr-fiper1 = <999999995>; fsl,tmr-fiper2 = <99990>; fsl,max-adj = <499999999>; + fsl,extts-fifo; }; enet0: ethernet@2d10000 { @@ -811,6 +861,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; pcie@3400000 { @@ -824,6 +875,7 @@ #size-cells = <2>; device_type = "pci"; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -848,6 +900,7 @@ #size-cells = <2>; device_type = "pci"; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 2ab74860d962..8841783aceec 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -47,9 +47,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -/include/ "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; L2: l2-cache-controller@c4200000 { @@ -72,6 +73,13 @@ #size-cells = <1>; ranges = <0x0 0xc1100000 0x200000>; + hhi: system-controller@4000 { + compatible = "amlogic,meson-hhi-sysctrl", + "simple-mfd", + "syscon"; + reg = <0x4000 0x400>; + }; + assist: assist@7c00 { compatible = "amlogic,meson-mx-assist", "syscon"; reg = <0x7c00 0x200>; @@ -244,6 +252,15 @@ #size-cells = <0>; status = "disabled"; }; + + rtc: rtc@740 { + compatible = "amlogic,meson6-rtc"; + reg = <0x740 0x14>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; }; usb0: usb@c9040000 { diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts index fc48cff71ddf..997e69c5963e 100644 --- a/arch/arm/boot/dts/meson6-atv1200.dts +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -61,6 +61,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index ca978ab952cd..65585255910a 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -70,6 +70,14 @@ }; }; + apb2: bus@d0000000 { + compatible = "simple-bus"; + reg = <0xd0000000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000000 0x40000>; + }; + xtal: xtal-clk { compatible = "fixed-clock"; clock-frequency = <24000000>; diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts index 55fb090a40ef..8686abd5de7f 100644 --- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts +++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts @@ -57,6 +57,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index e5cd325d7ea8..40c11b6b217a 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -166,6 +166,32 @@ }; }; + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-182150000 { + opp-hz = /bits/ 64 <182150000>; + opp-microvolt = <1150000>; + }; + opp-318750000 { + opp-hz = /bits/ 64 <318750000>; + opp-microvolt = <1150000>; + }; + opp-425000000 { + opp-hz = /bits/ 64 <425000000>; + opp-microvolt = <1150000>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-microvolt = <1150000>; + }; + opp-637500000 { + opp-hz = /bits/ 64 <637500000>; + opp-microvolt = <1150000>; + turbo-mode; + }; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, @@ -201,6 +227,45 @@ no-map; }; }; + + apb: bus@d0000000 { + compatible = "simple-bus"; + reg = <0xd0000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000000 0x200000>; + + mali: gpu@c0000 { + compatible = "amlogic,meson8-mali", "arm,mali-450"; + reg = <0xc0000 0x40000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2", "pp4", "ppmmu4", + "pp5", "ppmmu5", "pp6", "ppmmu6"; + resets = <&reset RESET_MALI>; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + operating-points-v2 = <&gpu_opp_table>; + }; + }; }; /* end of / */ &aobus { @@ -261,13 +326,6 @@ }; &cbus { - clkc: clock-controller@4000 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "amlogic,meson8-clkc"; - reg = <0x8000 0x4>, <0x4000 0x400>; - }; - reset: reset-controller@4404 { compatible = "amlogic,meson8b-reset"; reg = <0x4404 0x9c>; @@ -286,6 +344,11 @@ status = "disabled"; }; + clock-measure@8758 { + compatible = "amlogic,meson8-clk-measure"; + reg = <0x8758 0x1c>; + }; + pinctrl_cbus: pinctrl@9880 { compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0x9880 0x10>; @@ -390,6 +453,11 @@ compatible = "amlogic,meson8-efuse"; clocks = <&clkc CLKID_EFUSE>; clock-names = "core"; + + temperature_calib: calib@1f4 { + /* only the upper two bytes are relevant */ + reg = <0x1f4 0x4>; + }; }; ðmac { @@ -402,6 +470,14 @@ status = "okay"; }; +&hhi { + clkc: clock-controller { + compatible = "amlogic,meson8-clkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; +}; + &hwrng { compatible = "amlogic,meson8-rng", "amlogic,meson-rng"; clocks = <&clkc CLKID_RNG0>; @@ -464,11 +540,19 @@ compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; }; +&rtc { + compatible = "amlogic,meson8-rtc"; + resets = <&reset RESET_RTC>; +}; + &saradc { compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc"; clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_SAR_ADC>; clock-names = "clkin", "core"; + amlogic,hhi-sysctrl = <&hhi>; + nvmem-cells = <&temperature_calib>; + nvmem-cell-names = "temperature_calib"; }; &sdio { diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index d50fc2f60fa3..9bf4249cb60d 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -23,6 +23,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x40000000>; }; @@ -64,6 +65,11 @@ timeout-ms = <20000>; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + leds { compatible = "gpio-leds"; @@ -82,7 +88,18 @@ }; }; + rtc32k_xtal: rtc32k-xtal-clk { + /* X2 in the schematics */ + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "RTC32K"; + #clock-cells = <0>; + }; + usb_vbus: regulator-usb-vbus { + /* + * Silergy SY6288CCAC-GP 2A Power Distribution Switch. + */ compatible = "regulator-fixed"; regulator-name = "USB_VBUS"; @@ -90,11 +107,20 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* + * signal name from the schematics: USB_PWR_EN + */ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; enable-active-high; }; vcc_5v: regulator-vcc5v { + /* + * supplied by the main power input which called PWR_5V_STB + * in the schematics + */ compatible = "regulator-fixed"; regulator-name = "VCC5V"; @@ -102,6 +128,9 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + /* + * signal name from the schematics: 3V3_5V_EN + */ gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>; regulator-boot-on; @@ -109,12 +138,18 @@ }; vcck: regulator-vcck { + /* + * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz + * Synchronous Step Down Regulator. + */ compatible = "pwm-regulator"; regulator-name = "VCCK"; regulator-min-microvolt = <860000>; regulator-max-microvolt = <1140000>; + vin-supply = <&vcc_5v>; + pwms = <&pwm_cd 0 1148 0>; pwm-dutycycle-range = <100 0>; @@ -123,19 +158,66 @@ }; vcc_1v8: regulator-vcc1v8 { + /* + * ABLIC S-1339D18-M5001-GP + */ compatible = "regulator-fixed"; regulator-name = "VCC1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + vin-supply = <&vcc_3v3>; }; vcc_3v3: regulator-vcc3v3 { + /* + * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz + * Synchronous Step Down Regulator. Also called + * VDDIO_AO3.3V in the schematics. + */ compatible = "regulator-fixed"; regulator-name = "VCC3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + + vin-supply = <&vcc_5v>; + }; + + vcc_ddr3: regulator-vcc-ddr3 { + /* + * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz + * Synchronous Step Down Regulator. Also called + * DDR3_1.5V in the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC_DDR3_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&vcc_5v>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_rtc: regulator-vcc-rtc { + /* + * Global Mixed-mode Technology Inc. G918T12U-GP + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC_RTC"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + /* + * When the board is powered then the input is VCC3V3, + * otherwise power is taken from the coin cell battery. + */ + vin-supply = <&vcc_3v3>; }; }; @@ -164,6 +246,10 @@ eth_phy0: ethernet-phy@0 { /* IC Plus IP101A/G (0x02430c54) */ reg = <0>; + icplus,select-interrupt; + interrupt-parent = <&gpio_intc>; + /* GPIOH_3 */ + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; }; }; }; @@ -211,6 +297,56 @@ }; }; +&gpio_ao { + gpio-line-names = "Linux_TX", "Linux_RX", + "SLP_S5_N", "USB2_OC_FLAG#", + "HUB_RST", "USB_PWR_EN", + "I2S_IN", "SLP_S1_N", + "TCK", "TMS", "TDI", "TDO", + "HDMI_CEC", "5640_IRQ", + "MUTE", "S805_TEST#"; +}; + +&gpio { + gpio-line-names = /* Bank GPIOX */ + "WIFI_SD_D0", "WIFI_SD_D1", "WIFI_SD_D2", + "WIFI_SD_D3", "BTPCM_DOUT", "BTPCM_DIN", + "BTPCM_SYNC", "BTPCM_CLK", "WIFI_SD_CLK", + "WIFI_SD_CMD", "WIFI_32K", "WIFI_PWREN", + "UART_B_TX", "UART_B_RX", "UART_B_CTS_N", + "UART_B_RTS_N", "BT_EN", "WIFI_WAKE_HOST", + /* Bank GPIOY */ + "", "", "", "", "", "", "", "", "", "", + "", "", + /* Bank GPIODV */ + "VCCK_PWM_C", "I2C_SDA_A", "I2C_SCL_A", + "I2C_SDA_B", "I2C_SCL_B", "VDDEE_PWM_D", + "VDDEE_PWM 3V3_5V_EN", + /* Bank GPIOH */ + "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL", + "RMII_IRQ", "RMII_RST#", "RMII_TXD1", + "RMII_TXD0", "AV_select_1", "AV_select_2", + "MCU_Control_S", + /* Bank CARD */ + "SD_D1_B", "SD_D0_B", "SD_CLK_8726MX", + "SD_CMD_8726MX", "SD_D3_B", "SD_D2_B", + "CARD_EN_DET (CARD_DET)", + /* Bank BOOT */ + "NAND_D0 (EMMC)", "NAND_D1 (EMMC)", + "NAND_D2 (EMMC)", "NAND_D3 (EMMC)", + "NAND_D4 (EMMC)", "NAND_D5 (EMMC)", + "NAND_D6 (EMMC)", "NAND_D7 (EMMC)", + "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)", + "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)", + "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)", + "nWE_S1 NAND_nWE (EMMC)", "", "", "SPI_CS", + /* Bank DIF */ + "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV", + "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5", + "RMII_TXEN", "CPUETH_25MOUT", "RMII_MDC", + "RMII_MDIO"; +}; + &pwm_cd { status = "okay"; pinctrl-0 = <&pwm_c1_pins>; @@ -219,6 +355,12 @@ clock-names = "clkin0"; }; +&rtc { + status = "okay"; + clocks = <&rtc32k_xtal>; + vdd-supply = <&vcc_rtc>; +}; + /* exposed through the pin headers labeled "URDUG1" on the top of the PCB */ &uart_AO { status = "okay"; diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts index 5c9b76af8d42..08ddd7fb0bf8 100644 --- a/arch/arm/boot/dts/meson8b-mxq.dts +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -60,6 +60,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 0f0a46ddf3ff..f3ad9397f670 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -62,6 +62,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x40000000>; }; @@ -118,6 +119,19 @@ 1800000 1>; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + + rtc32k_xtal: rtc32k-xtal-clk { + /* X3 in the schematics */ + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "RTC32K"; + #clock-cells = <0>; + }; + vcc_1v8: regulator-vcc-1v8 { /* * RICHTEK RT9179 configured for a fixed output voltage of @@ -228,7 +242,59 @@ }; }; +&gpio { + gpio-line-names = /* Bank GPIOX */ + "J2 Header Pin 35", "J2 Header Pin 36", + "J2 Header Pin 32", "J2 Header Pin 31", + "J2 Header Pin 29", "J2 Header Pin 18", + "J2 Header Pin 22", "J2 Header Pin 16", + "J2 Header Pin 23", "J2 Header Pin 21", + "J2 Header Pin 19", "J2 Header Pin 33", + "J2 Header Pin 8", "J2 Header Pin 10", + "J2 Header Pin 15", "J2 Header Pin 13", + "J2 Header Pin 24", "J2 Header Pin 26", + /* Bank GPIOY */ + "Revision (upper)", "Revision (lower)", + "J2 Header Pin 7", "", "J2 Header Pin 12", + "J2 Header Pin 11", "", "", "", + "TFLASH_VDD_EN", "", "", + /* Bank GPIODV */ + "VCCK_PWM (PWM_C)", "I2CA_SDA", "I2CA_SCL", + "I2CB_SDA", "I2CB_SCL", "VDDEE_PWM (PWM_D)", + "", + /* Bank GPIOH */ + "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL", + "ETH_PHY_INTR", "ETH_PHY_NRST", "ETH_TXD1", + "ETH_TXD0", "ETH_TXD3", "ETH_TXD2", + "ETH_RGMII_TX_CLK", + /* Bank CARD */ + "SD_DATA1 (SDB_D1)", "SD_DATA0 (SDB_D0)", + "SD_CLK", "SD_CMD", "SD_DATA3 (SDB_D3)", + "SD_DATA2 (SDB_D2)", "SD_CDN (SD_DET_N)", + /* Bank BOOT */ + "SDC_D0 (EMMC)", "SDC_D1 (EMMC)", + "SDC_D2 (EMMC)", "SDC_D3 (EMMC)", + "SDC_D4 (EMMC)", "SDC_D5 (EMMC)", + "SDC_D6 (EMMC)", "SDC_D7 (EMMC)", + "SDC_CLK (EMMC)", "SDC_RSTn (EMMC)", + "SDC_CMD (EMMC)", "BOOT_SEL", "", "", "", + "", "", "", "", + /* Bank DIF */ + "ETH_RXD1", "ETH_RXD0", "ETH_RX_DV", + "RGMII_RX_CLK", "ETH_RXD3", "ETH_RXD2", + "ETH_TXEN", "ETH_PHY_REF_CLK_25MOUT", + "ETH_MDC", "ETH_MDIO"; +}; + &gpio_ao { + gpio-line-names = "UART TX", "UART RX", "", + "TF_3V3N_1V8_EN", "USB_HUB_RST_N", + "USB_OTG_PWREN", "J7 Header Pin 2", + "IR_IN", "J7 Header Pin 4", + "J7 Header Pin 6", "J7 Header Pin 5", + "J7 Header Pin 7", "HDMI_CEC", + "SYS_LED", "", ""; + /* * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal * to be turned high in order to be detected by the USB Controller. @@ -287,6 +353,12 @@ clock-names = "clkin0"; }; +&rtc { + /* needs to be enabled manually when a battery is connected */ + clocks = <&rtc32k_xtal>; + vdd-supply = <&vdd_rtc>; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 22d775460767..ec67f49116d9 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -158,6 +158,32 @@ }; }; + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-255000000 { + opp-hz = /bits/ 64 <255000000>; + opp-microvolt = <1100000>; + }; + opp-364300000 { + opp-hz = /bits/ 64 <364300000>; + opp-microvolt = <1100000>; + }; + opp-425000000 { + opp-hz = /bits/ 64 <425000000>; + opp-microvolt = <1100000>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-microvolt = <1100000>; + }; + opp-637500000 { + opp-hz = /bits/ 64 <637500000>; + opp-microvolt = <1100000>; + turbo-mode; + }; + }; + pmu { compatible = "arm,cortex-a5-pmu"; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, @@ -178,6 +204,33 @@ no-map; }; }; + + apb: bus@d0000000 { + compatible = "simple-bus"; + reg = <0xd0000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000000 0x200000>; + + mali: gpu@c0000 { + compatible = "amlogic,meson8b-mali", "arm,mali-450"; + reg = <0xc0000 0x40000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1"; + resets = <&reset RESET_MALI>; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + operating-points-v2 = <&gpu_opp_table>; + }; + }; }; /* end of / */ &aobus { @@ -222,13 +275,6 @@ }; &cbus { - clkc: clock-controller@4000 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "amlogic,meson8b-clkc"; - reg = <0x8000 0x4>, <0x4000 0x400>; - }; - reset: reset-controller@4404 { compatible = "amlogic,meson8b-reset"; reg = <0x4404 0x9c>; @@ -247,6 +293,11 @@ status = "disabled"; }; + clock-measure@8758 { + compatible = "amlogic,meson8b-clk-measure"; + reg = <0x8758 0x1c>; + }; + pinctrl_cbus: pinctrl@9880 { compatible = "amlogic,meson8b-cbus-pinctrl"; reg = <0x9880 0x10>; @@ -270,9 +321,7 @@ groups = "eth_tx_clk", "eth_tx_en", "eth_txd1_0", - "eth_txd1_1", "eth_txd0_0", - "eth_txd0_1", "eth_rx_clk", "eth_rx_dv", "eth_rxd1", @@ -281,7 +330,9 @@ "eth_mdc", "eth_ref_clk", "eth_txd2", - "eth_txd3"; + "eth_txd3", + "eth_rxd3", + "eth_rxd2"; function = "ethernet"; bias-disable; }; @@ -360,6 +411,11 @@ compatible = "amlogic,meson8b-efuse"; clocks = <&clkc CLKID_EFUSE>; clock-names = "core"; + + temperature_calib: calib@1f4 { + /* only the upper two bytes are relevant */ + reg = <0x1f4 0x4>; + }; }; ðmac { @@ -383,6 +439,14 @@ status = "okay"; }; +&hhi { + clkc: clock-controller { + compatible = "amlogic,meson8-clkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; +}; + &hwrng { compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; clocks = <&clkc CLKID_RNG0>; @@ -445,11 +509,19 @@ compatible = "amlogic,meson8b-pwm"; }; +&rtc { + compatible = "amlogic,meson8b-rtc"; + resets = <&reset RESET_RTC>; +}; + &saradc { compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc"; clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_SAR_ADC>; clock-names = "clkin", "core"; + amlogic,hhi-sysctrl = <&hhi>; + nvmem-cells = <&temperature_calib>; + nvmem-cell-names = "temperature_calib"; }; &sdio { diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index 6ac02beb5fa7..29d830ae4bf4 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -28,6 +28,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x80000000>; }; @@ -44,6 +45,11 @@ }; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + vcc_3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3V3"; diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi index d1a28c2adac5..bb87b251e16d 100644 --- a/arch/arm/boot/dts/meson8m2.dtsi +++ b/arch/arm/boot/dts/meson8m2.dtsi @@ -50,6 +50,10 @@ }; }; +&saradc { + compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc"; +}; + &wdt { compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt"; }; diff --git a/arch/arm/boot/dts/milbeaut-m10v-evb.dts b/arch/arm/boot/dts/milbeaut-m10v-evb.dts new file mode 100644 index 000000000000..614f60c6b0a2 --- /dev/null +++ b/arch/arm/boot/dts/milbeaut-m10v-evb.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Socionext Milbeaut M10V Evaluation Board */ +/dts-v1/; +#include "milbeaut-m10v.dtsi" + +/ { + model = "Socionext M10V EVB"; + compatible = "socionext,milbeaut-m10v-evb", "socionext,sc2000a"; + + aliases { + serial0 = &uart1; + }; + + chosen { + bootargs = "rootwait earlycon"; + stdout-path = "serial0:115200n8"; + }; + + clocks { + uclk40xi: uclk40xi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + +}; diff --git a/arch/arm/boot/dts/milbeaut-m10v.dtsi b/arch/arm/boot/dts/milbeaut-m10v.dtsi new file mode 100644 index 000000000000..aa7c6caeb750 --- /dev/null +++ b/arch/arm/boot/dts/milbeaut-m10v.dtsi @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "socionext,sc2000a"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "socionext,milbeaut-m10v-smp"; + cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + }; + cpu@f01 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + }; + cpu@f02 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf02>; + }; + cpu@f03 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf03>; + }; + }; + + timer { /* The Generic Timer */ + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <40000000>; + always-on; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&gic>; + + gic: interrupt-controller@1d000000 { + compatible = "arm,cortex-a7-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x1d001000 0x1000>, + <0x1d002000 0x1000>; /* CPU I/f base and size */ + }; + + timer@1e000050 { /* 32-bit Reload Timers */ + compatible = "socionext,milbeaut-timer"; + reg = <0x1e000050 0x20>; + interrupts = <0 91 4>; + }; + + uart1: serial@1e700010 { /* PE4, PE5 */ + /* Enable this as ttyUSI0 */ + compatible = "socionext,milbeaut-usio-uart"; + reg = <0x1e700010 0x10>; + interrupts = <0 141 0x4>, <0 149 0x4>; + interrupt-names = "rx", "tx"; + }; + + }; + + sram@0 { + compatible = "mmio-sram"; + reg = <0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x10000>; + smp-sram@f100 { + compatible = "socionext,milbeaut-smp-sram"; + reg = <0xf100 0x20>; + }; + }; +}; diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index 350208c5e1ed..aaedc4c742ea 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Marvell Technology Group Ltd. * Author: Haojian Zhuang <haojian.zhuang@marvell.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ /dts-v1/; @@ -19,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index ee03e0846740..b6f40743e07b 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -1,16 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Marvell Technology Group Ltd. * Author: Haojian Zhuang <haojian.zhuang@marvell.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/marvell,mmp2.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart1; serial1 = &uart2; diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index f57acf8f66b9..d1eae47b83f6 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Common CPCAP configuration used on Motorola phones - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &mcspi1 { diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts index 4a962a26482d..eb5291b0ee3a 100644 --- a/arch/arm/boot/dts/moxart-uc7112lx.dts +++ b/arch/arm/boot/dts/moxart-uc7112lx.dts @@ -1,8 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX * * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi index da7b3237bfe9..f5f070a87482 100644 --- a/arch/arm/boot/dts/moxart.dtsi +++ b/arch/arm/boot/dts/moxart.dtsi @@ -1,14 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* moxart.dtsi - Device Tree Include file for MOXA ART family SoC * * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com> - * - * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; compatible = "moxa,moxart"; model = "MOXART"; interrupt-parent = <&intc>; diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index 43aaa67fcd87..a5c91c240db9 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * mpa1600.dts - Device Tree file for Phontech MPA 1600 * * Copyright (C) 2013 Joachim Eastwood <manabian@gmail.com> - * - * Licensed under GPLv2 only */ /dts-v1/; #include "at91rm9200.dtsi" diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi index 23467390558d..96fb5a5cf4d3 100644 --- a/arch/arm/boot/dts/mps2.dtsi +++ b/arch/arm/boot/dts/mps2.dtsi @@ -171,7 +171,7 @@ uart0: serial@4000 { compatible = "arm,mps2-uart"; reg = <0x4000 0x1000>; - interrupts = <0 1 12>; + interrupts = <0>, <1>, <12>; clocks = <&sysclk>; status = "disabled"; }; @@ -179,7 +179,7 @@ uart1: serial@5000 { compatible = "arm,mps2-uart"; reg = <0x5000 0x1000>; - interrupts = <2 3 12>; + interrupts = <2>, <3>, <12>; clocks = <&sysclk>; status = "disabled"; }; @@ -187,7 +187,7 @@ uart2: serial@6000 { compatible = "arm,mps2-uart"; reg = <0x6000 0x1000>; - interrupts = <4 5 12>; + interrupts = <4>, <5>, <12>; clocks = <&sysclk>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index be0edb3dae6c..88f8fd22302a 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -13,6 +13,7 @@ compatible = "mediatek,mt2701-evb", "mediatek,mt2701"; memory { + device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; diff --git a/arch/arm/boot/dts/mt2701-pinfunc.h b/arch/arm/boot/dts/mt2701-pinfunc.h index e24ebc8d928e..136a25a0ae28 100644 --- a/arch/arm/boot/dts/mt2701-pinfunc.h +++ b/arch/arm/boot/dts/mt2701-pinfunc.h @@ -1,15 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2015 MediaTek Inc. * Author: Biao Huang <biao.huang@mediatek.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __DTS_MT2701_PINFUNC_H diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 180377e56ef4..51e1305c6471 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -12,10 +12,11 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/memory/mt2701-larb-port.h> #include <dt-bindings/reset/mt2701-resets.h> -#include "skeleton64.dtsi" #include "mt2701-pinfunc.h" / { + #address-cells = <2>; + #size-cells = <2>; compatible = "mediatek,mt2701"; interrupt-parent = <&cirq>; diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mt6580-evbp1.dts index ca137897ed60..755a0774a8ee 100644 --- a/arch/arm/boot/dts/mt6580-evbp1.dts +++ b/arch/arm/boot/dts/mt6580-evbp1.dts @@ -22,6 +22,7 @@ }; memory { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi index 2bdc5ed12fca..9e17698c0609 100644 --- a/arch/arm/boot/dts/mt6580.dtsi +++ b/arch/arm/boot/dts/mt6580.dtsi @@ -7,7 +7,6 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" / { compatible = "mediatek,mt6580"; diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts index 7bbaa1279a26..1e7079a3b449 100644 --- a/arch/arm/boot/dts/mt6589-aquaris5.dts +++ b/arch/arm/boot/dts/mt6589-aquaris5.dts @@ -18,6 +18,7 @@ }; memory { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index 28df8495686a..f3ccb70c0779 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -7,9 +7,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "mediatek,mt6589"; interrupt-parent = <&sysirq>; diff --git a/arch/arm/boot/dts/mt6592-evb.dts b/arch/arm/boot/dts/mt6592-evb.dts index 02849f6548e3..5e00c1cca2d1 100644 --- a/arch/arm/boot/dts/mt6592-evb.dts +++ b/arch/arm/boot/dts/mt6592-evb.dts @@ -13,7 +13,7 @@ compatible = "mediatek,mt6592-evb", "mediatek,mt6592"; memory { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; }; - diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mt6592.dtsi index 8696ac891d60..3716f8db951c 100644 --- a/arch/arm/boot/dts/mt6592.dtsi +++ b/arch/arm/boot/dts/mt6592.dtsi @@ -7,9 +7,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "mediatek,mt6592"; interrupt-parent = <&sysirq>; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 98f115966391..a79f0b6c3429 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -187,17 +187,26 @@ cooling-maps { map0 { trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu_active>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map2 { trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/mt8127-moose.dts b/arch/arm/boot/dts/mt8127-moose.dts index 308829b2da86..560687af87dc 100644 --- a/arch/arm/boot/dts/mt8127-moose.dts +++ b/arch/arm/boot/dts/mt8127-moose.dts @@ -13,6 +13,7 @@ compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; memory { + device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi index 3adfc6f7859c..aced173c2a52 100644 --- a/arch/arm/boot/dts/mt8127.dtsi +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -7,9 +7,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton64.dtsi" / { + #address-cells = <2>; + #size-cells = <2>; compatible = "mediatek,mt8127"; interrupt-parent = <&sysirq>; diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts index 0ace7a40a60d..f6147fe62f41 100644 --- a/arch/arm/boot/dts/mt8135-evbp1.dts +++ b/arch/arm/boot/dts/mt8135-evbp1.dts @@ -13,6 +13,7 @@ compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135"; memory { + device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/mt8135-pinfunc.h b/arch/arm/boot/dts/mt8135-pinfunc.h index 5a609875cb18..ce0cb5a440eb 100644 --- a/arch/arm/boot/dts/mt8135-pinfunc.h +++ b/arch/arm/boot/dts/mt8135-pinfunc.h @@ -1,15 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2014 MediaTek Inc. * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __DTS_MT8135_PINFUNC_H diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index 688069dc1533..0e4e835026db 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -9,10 +9,11 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/mt8135-resets.h> -#include "skeleton64.dtsi" #include "mt8135-pinfunc.h" / { + #address-cells = <2>; + #size-cells = <2>; compatible = "mediatek,mt8135"; interrupt-parent = <&sysirq>; diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi index 4907c5085d4b..c53f42777851 100644 --- a/arch/arm/boot/dts/nspire-classic.dtsi +++ b/arch/arm/boot/dts/nspire-classic.dtsi @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/boot/nspire-classic.dts * * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * */ /include/ "nspire.dtsi" diff --git a/arch/arm/boot/dts/nspire-clp.dts b/arch/arm/boot/dts/nspire-clp.dts index fa5a044656de..f52f38c61588 100644 --- a/arch/arm/boot/dts/nspire-clp.dts +++ b/arch/arm/boot/dts/nspire-clp.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/boot/nspire-clp.dts * * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * */ /dts-v1/; diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts index 08e0b81b3385..da95c3736651 100644 --- a/arch/arm/boot/dts/nspire-cx.dts +++ b/arch/arm/boot/dts/nspire-cx.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/boot/nspire-cx.dts * * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * */ /dts-v1/; diff --git a/arch/arm/boot/dts/nspire-tp.dts b/arch/arm/boot/dts/nspire-tp.dts index 621391ce6ed6..f7d0faacd4cc 100644 --- a/arch/arm/boot/dts/nspire-tp.dts +++ b/arch/arm/boot/dts/nspire-tp.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/boot/nspire-tp.dts * * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * */ /dts-v1/; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index 1a5ae4cd107f..c35fd6667716 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -1,17 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/boot/nspire.dtsi * * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&intc>; cpus { diff --git a/arch/arm/boot/dts/omap2420-clocks.dtsi b/arch/arm/boot/dts/omap2420-clocks.dtsi index f8e5bd3cc628..00a7a199a91c 100644 --- a/arch/arm/boot/dts/omap2420-clocks.dtsi +++ b/arch/arm/boot/dts/omap2420-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP2420 clock data * * Copyright (C) 2014 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &prcm_clocks { diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 9265c0b9c3f3..7d660271400d 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts index 96b9913ecc1f..09c1dbc0bb69 100644 --- a/arch/arm/boot/dts/omap2420-n810.dts +++ b/arch/arm/boot/dts/omap2420-n810.dts @@ -48,7 +48,7 @@ pinctrl-names = "default"; pinctrl-0 = <&aic33_pins>; - gpio-reset = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */ + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */ ai3x-gpio-func = < 10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */ diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi index a5aa7d619849..4e5ab5189476 100644 --- a/arch/arm/boot/dts/omap2430-clocks.dtsi +++ b/arch/arm/boot/dts/omap2430-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP2430 clock data * * Copyright (C) 2014 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &scm_clocks { diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts index 4f7d9d7c00c7..f7e324886642 100644 --- a/arch/arm/boot/dts/omap2430-sdp.dts +++ b/arch/arm/boot/dts/omap2430-sdp.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi index 769a346de613..07af87edf0e2 100644 --- a/arch/arm/boot/dts/omap24xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP24xx clock data * * Copyright (C) 2014 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &scm_clocks { mcbsp1_mux_fck: mcbsp1_mux_fck@4 { diff --git a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts index 7ac3bcf59d59..e498495b8465 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-beagle-xm.dts" diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 9985ee2aae0c..1aa99fc1487a 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 91bb50ad9a4f..e3df3c166902 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 746a658e84b6..ac3d996cec5c 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Author: Anil Kumar <anilk4.v@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index 1093387259e2..3decc2d78a6c 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-devkit8000-common.dtsi" diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts index d8b16398bfb3..a80fc60bc773 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts index edb37ba80498..0753776071f8 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 40ac89482f5d..faafc48d8f61 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Author: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index a14303b09ae2..e0c0382388f0 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 4c1227d1e79b..17c89df6ce6b 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -122,6 +122,7 @@ }; &mmc2 { + interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>; vmmc-supply = <&wl12xx_vmmc>; non-removable; bus-width = <4>; @@ -132,8 +133,10 @@ wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; - interrupt-parent = <&gpio5>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 149 */ + /* gpio_149 with uart1_rts pad as wakeirq */ + interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>, + <&omap3_pmx_core 0x14e>; + interrupt-names = "irq", "wakeup"; ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi index ce7f42f9448c..b4109f48ec18 100644 --- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi @@ -86,6 +86,10 @@ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */ >; }; @@ -127,9 +131,13 @@ >; }; + /* + * Note that gpio_150 pulled high with internal pull to prevent wlcore + * reset on return from off mode in idle. + */ wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_cts.gpio_150 */ OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ >; }; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 21a3b88aef0c..6a94815feb76 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 93b420934e8e..b295f6fad2a5 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Marek Belisko <marek@goldelico.com> * * Based on omap3-beagle-xm.dts - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -32,6 +29,14 @@ display1 = &tv0; }; + ldo_3v3: fixedregulator { + compatible = "regulator-fixed"; + regulator-name = "ldo_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + /* fixed 26MHz oscillator */ hfclk_26m: oscillator { #clock-cells = <0>; @@ -116,6 +121,7 @@ spi-cpol; spi-cpha; + backlight= <&backlight>; label = "lcd"; port { lcd_in: endpoint { @@ -125,7 +131,7 @@ }; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm11 0 12000000 0>; pwm-names = "backlight"; @@ -224,6 +230,15 @@ }; }; +&omap3_pmx_wkup { + gpio1_pins: pinmux_gpio1_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ + OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */ + >; + }; +}; + &omap3_pmx_core { pinctrl-names = "default"; pinctrl-0 = < @@ -312,6 +327,12 @@ >; }; + gps_pins: pinmux_gps_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */ + >; + }; + hdq_pins: hdq_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ @@ -636,6 +657,11 @@ status = "disabled"; }; +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; @@ -644,6 +670,14 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; + gnss: gnss { + compatible = "wi2wi,w2sg0004"; + pinctrl-names = "default"; + pinctrl-0 = <&gps_pins>; + sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; + lna-supply = <&vsim>; + vcc-supply = <&ldo_3v3>; + }; }; &uart3 { diff --git a/arch/arm/boot/dts/omap3-gta04a3.dts b/arch/arm/boot/dts/omap3-gta04a3.dts index cc9244956679..bfae1a9ceeac 100644 --- a/arch/arm/boot/dts/omap3-gta04a3.dts +++ b/arch/arm/boot/dts/omap3-gta04a3.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-gta04.dtsi" diff --git a/arch/arm/boot/dts/omap3-gta04a4.dts b/arch/arm/boot/dts/omap3-gta04a4.dts index 77afc711fe4f..f1cf24d55e6f 100644 --- a/arch/arm/boot/dts/omap3-gta04a4.dts +++ b/arch/arm/boot/dts/omap3-gta04a4.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Marek Belisko <marek@goldelico.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-gta04.dtsi" diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts index bd232b1b24cb..fd84bbf3b9cc 100644 --- a/arch/arm/boot/dts/omap3-gta04a5.dts +++ b/arch/arm/boot/dts/omap3-gta04a5.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-gta04.dtsi" @@ -82,7 +79,7 @@ /* * for WL183x module see - * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt + * Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt */ &wifi_pwrseq { diff --git a/arch/arm/boot/dts/omap3-gta04a5one.dts b/arch/arm/boot/dts/omap3-gta04a5one.dts index 9b7bbdc344b3..9db9fe67cd63 100644 --- a/arch/arm/boot/dts/omap3-gta04a5one.dts +++ b/arch/arm/boot/dts/omap3-gta04a5one.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-gta04a5.dts" diff --git a/arch/arm/boot/dts/omap3-ha-common.dtsi b/arch/arm/boot/dts/omap3-ha-common.dtsi index bd66545ef954..33132855d517 100644 --- a/arch/arm/boot/dts/omap3-ha-common.dtsi +++ b/arch/arm/boot/dts/omap3-ha-common.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ * Copyright (C) 2014 Stefan Roese <sr@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-tao3530.dtsi" diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts index 60af7c2358a3..badb9b3c8897 100644 --- a/arch/arm/boot/dts/omap3-ha-lcd.dts +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ * Copyright (C) 2014 Stefan Roese <sr@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-ha-common.dtsi" diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts index fde325688fb9..a5365252bfbe 100644 --- a/arch/arm/boot/dts/omap3-ha.dts +++ b/arch/arm/boot/dts/omap3-ha.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ * Copyright (C) 2014 Stefan Roese <sr@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-ha-common.dtsi" diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index f33cc80c9dbc..5de2be9bbe6f 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Common device tree for IGEP boards based on AM/DM37x * * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index ecbec23af49f..91caa50b74c4 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Common Device Tree Source for IGEPv2 * * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-igep.dtsi" diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 285681d7af49..03dcd05fb8a0 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-igep0020-common.dtsi" diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 33d6b4ead092..6d0519e3dfd0 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-igep0020-common.dtsi" diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index 443f71707437..71b0ae807ecd 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Common Device Tree Source for IGEP COM MODULE * * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-igep.dtsi" diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 1adc73bd2ca0..060acd1e803a 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) * * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-igep0030-common.dtsi" diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 55b0cc4f5ee5..25170bd3c573 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-igep0030-common.dtsi" diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index e28fe13cb007..9a5fde2d9bce 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index cf7a2a72348d..c22833d4e568 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -1,10 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include "omap36xx.dtsi" diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index 0e3c9812f4e3..fec335400074 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -1,10 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 1f91646b8951..74c0ff2350d3 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap3-n9.dts - Device Tree file for Nokia N9 * * Written by: Aaro Koskinen <aaro.koskinen@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 826920e6b878..84a5ade1e865 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz> * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 (or later) as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index e142e6c70a59..5441e9ffdbb4 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff) * * Written by: Aaro Koskinen <aaro.koskinen@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap36xx.dtsi" diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 2354e09343f3..9886bf8b90ab 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap3-n950.dts - Device Tree file for Nokia N950 * * Written by: Aaro Koskinen <aaro.koskinen@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi index 99a7eee6e61f..bb932913c9e3 100644 --- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-alto35.dts b/arch/arm/boot/dts/omap3-overo-alto35.dts index a3249eb7501d..37c64dd5f672 100644 --- a/arch/arm/boot/dts/omap3-overo-alto35.dts +++ b/arch/arm/boot/dts/omap3-overo-alto35.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index ac141fcd1742..971d3e250515 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi index 56dbd113430e..2d2c61d7aa86 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-chestnut43.dts index fe0824aca3c0..d147d704b89f 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-chestnut43.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi index ae5564abbe2f..c9e62e414abb 100644 --- a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 854117dc0b77..185ce53de0ec 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index b0753ef8abd4..7fe0f9148232 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi index 520453d95704..8a4a02472c9a 100644 --- a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi index 286f5baddf07..155aec121400 100644 --- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-gallop43.dts b/arch/arm/boot/dts/omap3-overo-gallop43.dts index 241f5c1914e0..24b40bdf7ea1 100644 --- a/arch/arm/boot/dts/omap3-overo-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-gallop43.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi index a8020fb42464..82a04466747a 100644 --- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Ash Charles, Gumstix Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-palo35.dts b/arch/arm/boot/dts/omap3-overo-palo35.dts index e3e2bce6edbb..55e08d56b18b 100644 --- a/arch/arm/boot/dts/omap3-overo-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-palo35.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Ash Charles, Gumstix Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi index 11965737e2c9..453a55324fa1 100644 --- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-palo43.dts b/arch/arm/boot/dts/omap3-overo-palo43.dts index cedb103b4b66..092c8325a133 100644 --- a/arch/arm/boot/dts/omap3-overo-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-palo43.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts index e9cae52afc25..18338576c41d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts index 7d82fdfd9909..f204c8af8281 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts index a1b57e0cf37f..c633f7cee68e 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts index 4e725d2d0038..fb88ebc9858c 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Ash Charles, Gumstix, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts index b585d8fbc347..76cca00d97b6 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts index a0d7fd8369d7..cc081a9e4c1e 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts index 879383acad87..1de41c0826e0 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts index da6afafcc6c1..9ed13118ed8e 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Ash Charles, Gumstix, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-storm.dtsi b/arch/arm/boot/dts/omap3-overo-storm.dtsi index 6cb418b4124a..2af15d5f61f9 100644 --- a/arch/arm/boot/dts/omap3-overo-storm.dtsi +++ b/arch/arm/boot/dts/omap3-overo-storm.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap36xx.dtsi" diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi index 0ac97ba98549..df7450f17ffd 100644 --- a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-summit.dts b/arch/arm/boot/dts/omap3-overo-summit.dts index 69765609455a..a6c9799fe491 100644 --- a/arch/arm/boot/dts/omap3-overo-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-summit.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 1b304e2f1bd2..9bf4b88a4b50 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi.dts index fd6400efcdee..ce3f2404f329 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-tobi.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi index 82e98ee3023a..e5da3bc6f105 100644 --- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Ash Charles, Gumstix, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-tobiduo.dts index b9ce310f6e82..fc6163eae45e 100644 --- a/arch/arm/boot/dts/omap3-overo-tobiduo.dts +++ b/arch/arm/boot/dts/omap3-overo-tobiduo.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Ash Charles, Gumstix, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index 932a02ff552a..cc9263e99254 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap34xx.dtsi" diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index 25498f756a29..81b957f33c9f 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 * Nikolaus Schaller <hns@goldelico.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts index 8775897a4ce7..6bd9041942f2 100644 --- a/arch/arm/boot/dts/omap3-pandora-600mhz.dts +++ b/arch/arm/boot/dts/omap3-pandora-600mhz.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 * Nikolaus Schaller <hns@goldelico.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 90c98f95b2b3..ec5891718ae6 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 * Nikolaus Schaller <hns@goldelico.com> * * Common device tree include for OpenPandora devices. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index bc4498e77bc9..40a87330e8c3 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015-2016 Paul Kocialkowski <contact@paulk.fr> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 6f5bd027b717..a7a04d78deeb 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ * Copyright (C) 2014 Stefan Roese <sr@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts index 9736ba79bb5b..6276e7079b36 100644 --- a/arch/arm/boot/dts/omap3-thunder.dts +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ * Copyright (C) 2014 Stefan Roese <sr@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap3-tao3530.dtsi" diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index aac27a441331..db3a2fe84e99 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index d652708f6bef..0abd61108a53 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi index 86de819a0dcf..2ec3628d3315 100644 --- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi +++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP3430 ES1 clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &cm_clocks { gfx_l3_ck: gfx_l3_ck@b10 { diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi index 858aa0796ec8..5e9d1afcd422 100644 --- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP34XX/OMAP36XX clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &cm_clocks { security_l4_ick2: security_l4_ick2 { diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi index 15d18669000e..9974d5226971 100644 --- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &prm_clocks { corex2_d3_fck: corex2_d3_fck { diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi index a21d1f021267..e66fc57ec35d 100644 --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP36xx clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &cm_clocks { dpll4_ck: dpll4_ck@d00 { diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi index 1a4fbdf0d9cc..945537aee3ca 100644 --- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP34xx/OMAP36xx clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &cm_clocks { ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 { diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 9bd91641aa7c..685c82a9d03e 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP3 clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &prm_clocks { virt_16_8m_ck: virt_16_8m_ck { diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 67d77eee9433..4454449de00c 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; #include <dt-bindings/input/input.h> @@ -214,7 +210,6 @@ width-mm = <50>; height-mm = <89>; - backlight = <&lcd_backlight>; panel-timing { clock-frequency = <0>; /* Calculated by dsi */ @@ -359,40 +354,54 @@ &mmc3 { vmmc-supply = <&wl12xx_vmmc>; + /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0xde>; - + interrupt-names = "irq", "wakeup"; non-removable; bus-width = <4>; cap-power-off-card; + keep-power-in-suspend; #address-cells = <1>; #size-cells = <0>; wlcore: wlcore@2 { compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; - interrupt-parent = <&gpio4>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */ + /* gpio_100 with gpmc_wait2 pad as wakeirq */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>, + <&omap4_pmx_core 0x4e>; + interrupt-names = "irq", "wakeup"; ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; }; &i2c1 { - lm3532@38 { + led-controller@38 { compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x38>; enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; - lcd_backlight: backlight { - compatible = "ti,lm3532-backlight"; + ramp-up-us = <1024>; + ramp-down-us = <8193>; - lcd { - led-sources = <0 1 2>; - ramp-up-msec = <1>; - ramp-down-msec = <0>; - }; + led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; }; }; }; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index cfcac0d73851..8047e8cdb3af 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index 5e8169153414..805dfd40030d 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -1,12 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap443x.dtsi" +#include "omap4-mcpdm.dtsi" / { model = "Gumstix Duovero"; @@ -82,16 +80,6 @@ >; }; - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ - >; - }; - mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ @@ -210,16 +198,6 @@ status = "okay"; }; -&mcpdm { - pinctrl-names = "default"; - pinctrl-0 = <&mcpdm_pins>; - - clocks = <&twl6040>; - clock-names = "pdmclk"; - - status = "okay"; -}; - &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts index e3763ac75719..31d856b58f8a 100644 --- a/arch/arm/boot/dts/omap4-kc1.dts +++ b/arch/arm/boot/dts/omap4-kc1.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 Paul Kocialkowski <contact@paulk.fr> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi new file mode 100644 index 000000000000..67072df39bc7 --- /dev/null +++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi @@ -0,0 +1,501 @@ +&l4_abe { /* 0x40100000 */ + compatible = "ti,omap4-l4-abe", "simple-bus"; + reg = <0x40100000 0x400>, + <0x40100400 0x400>; + reg-names = "la", "ap"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ + <0x49000000 0x49000000 0x100000>; + segment@0 { /* 0x40100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = + /* CPU to L4 ABE mapping */ + <0x00000000 0x00000000 0x000400>, /* ap 0 */ + <0x00000400 0x00000400 0x000400>, /* ap 1 */ + <0x00022000 0x00022000 0x001000>, /* ap 2 */ + <0x00023000 0x00023000 0x001000>, /* ap 3 */ + <0x00024000 0x00024000 0x001000>, /* ap 4 */ + <0x00025000 0x00025000 0x001000>, /* ap 5 */ + <0x00026000 0x00026000 0x001000>, /* ap 6 */ + <0x00027000 0x00027000 0x001000>, /* ap 7 */ + <0x00028000 0x00028000 0x001000>, /* ap 8 */ + <0x00029000 0x00029000 0x001000>, /* ap 9 */ + <0x0002a000 0x0002a000 0x001000>, /* ap 10 */ + <0x0002b000 0x0002b000 0x001000>, /* ap 11 */ + <0x0002e000 0x0002e000 0x001000>, /* ap 12 */ + <0x0002f000 0x0002f000 0x001000>, /* ap 13 */ + <0x00030000 0x00030000 0x001000>, /* ap 14 */ + <0x00031000 0x00031000 0x001000>, /* ap 15 */ + <0x00032000 0x00032000 0x001000>, /* ap 16 */ + <0x00033000 0x00033000 0x001000>, /* ap 17 */ + <0x00038000 0x00038000 0x001000>, /* ap 18 */ + <0x00039000 0x00039000 0x001000>, /* ap 19 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 20 */ + <0x0003b000 0x0003b000 0x001000>, /* ap 21 */ + <0x0003c000 0x0003c000 0x001000>, /* ap 22 */ + <0x0003d000 0x0003d000 0x001000>, /* ap 23 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 24 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 25 */ + <0x00080000 0x00080000 0x010000>, /* ap 26 */ + <0x00080000 0x00080000 0x001000>, /* ap 27 */ + <0x000a0000 0x000a0000 0x010000>, /* ap 28 */ + <0x000a0000 0x000a0000 0x001000>, /* ap 29 */ + <0x000c0000 0x000c0000 0x010000>, /* ap 30 */ + <0x000c0000 0x000c0000 0x001000>, /* ap 31 */ + <0x000f1000 0x000f1000 0x001000>, /* ap 32 */ + <0x000f2000 0x000f2000 0x001000>, /* ap 33 */ + + /* L3 to L4 ABE mapping */ + <0x49000000 0x49000000 0x000400>, /* ap 0 */ + <0x49000400 0x49000400 0x000400>, /* ap 1 */ + <0x49022000 0x49022000 0x001000>, /* ap 2 */ + <0x49023000 0x49023000 0x001000>, /* ap 3 */ + <0x49024000 0x49024000 0x001000>, /* ap 4 */ + <0x49025000 0x49025000 0x001000>, /* ap 5 */ + <0x49026000 0x49026000 0x001000>, /* ap 6 */ + <0x49027000 0x49027000 0x001000>, /* ap 7 */ + <0x49028000 0x49028000 0x001000>, /* ap 8 */ + <0x49029000 0x49029000 0x001000>, /* ap 9 */ + <0x4902a000 0x4902a000 0x001000>, /* ap 10 */ + <0x4902b000 0x4902b000 0x001000>, /* ap 11 */ + <0x4902e000 0x4902e000 0x001000>, /* ap 12 */ + <0x4902f000 0x4902f000 0x001000>, /* ap 13 */ + <0x49030000 0x49030000 0x001000>, /* ap 14 */ + <0x49031000 0x49031000 0x001000>, /* ap 15 */ + <0x49032000 0x49032000 0x001000>, /* ap 16 */ + <0x49033000 0x49033000 0x001000>, /* ap 17 */ + <0x49038000 0x49038000 0x001000>, /* ap 18 */ + <0x49039000 0x49039000 0x001000>, /* ap 19 */ + <0x4903a000 0x4903a000 0x001000>, /* ap 20 */ + <0x4903b000 0x4903b000 0x001000>, /* ap 21 */ + <0x4903c000 0x4903c000 0x001000>, /* ap 22 */ + <0x4903d000 0x4903d000 0x001000>, /* ap 23 */ + <0x4903e000 0x4903e000 0x001000>, /* ap 24 */ + <0x4903f000 0x4903f000 0x001000>, /* ap 25 */ + <0x49080000 0x49080000 0x010000>, /* ap 26 */ + <0x49080000 0x49080000 0x001000>, /* ap 27 */ + <0x490a0000 0x490a0000 0x010000>, /* ap 28 */ + <0x490a0000 0x490a0000 0x001000>, /* ap 29 */ + <0x490c0000 0x490c0000 0x010000>, /* ap 30 */ + <0x490c0000 0x490c0000 0x001000>, /* ap 31 */ + <0x490f1000 0x490f1000 0x001000>, /* ap 32 */ + <0x490f2000 0x490f2000 0x001000>; /* ap 33 */ + + target-module@22000 { /* 0x40122000, ap 2 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp1"; + reg = <0x2208c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCBSP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>, + <0x49022000 0x49022000 0x1000>; + + mcbsp1: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@24000 { /* 0x40124000, ap 4 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp2"; + reg = <0x2408c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCBSP2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>, + <0x49024000 0x49024000 0x1000>; + + mcbsp2: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@26000 { /* 0x40126000, ap 6 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp3"; + reg = <0x2608c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCBSP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>, + <0x49026000 0x49026000 0x1000>; + + mcbsp3: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@28000 { /* 0x40128000, ap 8 08.0 */ + compatible = "ti,sysc-mcasp", "ti,sysc"; + ti,hwmods = "mcasp"; + reg = <0x28000 0x4>, + <0x28004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>, + <0x49028000 0x49028000 0x1000>; + + /* + * Child device unsupported by davinci-mcasp. At least + * RX path is disabled for omap4, and only DIT mode + * works with no I2S. See also old Android kernel + * omap-mcasp driver for more information. + */ + }; + + target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>, + <0x4902a000 0x4902a000 0x1000>; + }; + + target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "dmic"; + reg = <0x2e000 0x4>, + <0x2e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_DMIC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>, + <0x4902e000 0x4902e000 0x1000>; + + dmic: dmic@0 { + compatible = "ti,omap4-dmic"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 67>; + dma-names = "up_link"; + status = "disabled"; + }; + }; + + target-module@30000 { /* 0x40130000, ap 14 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer3"; + reg = <0x30000 0x4>, + <0x30010 0x4>, + <0x30014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>, + <0x49030000 0x49030000 0x1000>; + + wdt3: wdt@0 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcpdm"; + reg = <0x32000 0x4>, + <0x32010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCPDM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>, + <0x49032000 0x49032000 0x1000>; + + /* Must be only enabled for boards with pdmclk wired */ + status = "disabled"; + + mcpdm: mcpdm@0 { + compatible = "ti,omap4-mcpdm"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; + }; + }; + + target-module@38000 { /* 0x40138000, ap 18 12.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer5"; + reg = <0x38000 0x4>, + <0x38010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x1000>, + <0x49038000 0x49038000 0x1000>; + + timer5: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x00000000 0x80>, + <0x49038000 0x80>; + clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + }; + }; + + target-module@3a000 { /* 0x4013a000, ap 20 14.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer6"; + reg = <0x3a000 0x4>, + <0x3a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3a000 0x1000>, + <0x4903a000 0x4903a000 0x1000>; + + timer6: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x00000000 0x80>, + <0x4903a000 0x80>; + clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + }; + }; + + target-module@3c000 { /* 0x4013c000, ap 22 16.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer7"; + reg = <0x3c000 0x4>, + <0x3c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x1000>, + <0x4903c000 0x4903c000 0x1000>; + + timer7: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x00000000 0x80>, + <0x4903c000 0x80>; + clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + }; + }; + + target-module@3e000 { /* 0x4013e000, ap 24 18.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer8"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>, + <0x4903e000 0x4903e000 0x1000>; + + timer8: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x00000000 0x80>, + <0x4903e000 0x80>; + clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + ti,timer-dsp; + }; + }; + + target-module@80000 { /* 0x40180000, ap 26 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>, + <0x49080000 0x49080000 0x10000>; + }; + + target-module@a0000 { /* 0x401a0000, ap 28 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x10000>, + <0x490a0000 0x490a0000 0x10000>; + }; + + target-module@c0000 { /* 0x401c0000, ap 30 1e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc0000 0x10000>, + <0x490c0000 0x490c0000 0x10000>; + }; + + target-module@f1000 { /* 0x401f1000, ap 32 20.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "aess"; + reg = <0xf1000 0x4>, + <0xf1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf1000 0x1000>, + <0x490f1000 0x490f1000 0x1000>; + + /* + * No child device binding or driver in mainline. + * See Android tree and related upstreaming efforts + * for the old driver. + */ + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap4-mcpdm.dtsi b/arch/arm/boot/dts/omap4-mcpdm.dtsi new file mode 100644 index 000000000000..915a9b31a33b --- /dev/null +++ b/arch/arm/boot/dts/omap4-mcpdm.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common omap4 mcpdm configuration + * + * Only include this file if your board has pdmclk wired from the + * pmic to ABE as mcpdm uses an external clock for the module. + */ + +&omap4_pmx_core { + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + /* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */ + OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) + + /* 0x4a100108 abe_pdm_dl_data.abe_pdm_dl_data af25 */ + OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) + + /* 0x4a10010a abe_pdm_frame.abe_pdm_frame ae25 */ + OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) + + /* 0x4a10010c abe_pdm_lb_clk.abe_pdm_lb_clk af26 */ + OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) + + /* 0x4a10010e abe_clks.abe_clks ah26 */ + OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; +}; + +&mcpdm_module { + /* + * McPDM pads must be muxed at the interconnect target module + * level as the module on the SoC needs external clock from + * the PMIC + */ + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + +&mcpdm { + clocks = <&twl6040>; + clock-names = "pdmclk"; +}; diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index f1a6476af371..64083075dd52 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 27895c1604b9..14be2ecb62b1 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -1,12 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/input/input.h> #include "elpida_ecb240abacn.dtsi" +#include "omap4-mcpdm.dtsi" / { memory@80000000 { @@ -226,16 +224,6 @@ >; }; - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ - >; - }; - mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ @@ -485,8 +473,10 @@ wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; - interrupt-parent = <&gpio2>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ + /* gpio_53 with gpmc_ncs3 pad as wakeup */ + interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>, + <&omap4_pmx_core 0x3a>; + interrupt-names = "irq", "wakeup"; ref-clock-frequency = <38400000>; }; }; @@ -507,16 +497,6 @@ status = "okay"; }; -&mcpdm { - pinctrl-names = "default"; - pinctrl-0 = <&mcpdm_pins>; - - clocks = <&twl6040>; - clock-names = "pdmclk"; - - status = "okay"; -}; - &twl_usb_comparator { usb-supply = <&vusb>; }; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 19d02df8d8a5..9dd307b52604 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index a0e28b2e254e..fb2f47717b45 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts index 3d3140fd9659..42154520d383 100644 --- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts +++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap4-sdp.dts" diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 9dc7ec7655cb..3c274965ff40 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -1,14 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; #include "omap443x.dtsi" #include "elpida_ecb240abacn.dtsi" +#include "omap4-mcpdm.dtsi" / { model = "TI OMAP4 SDP board"; @@ -26,6 +24,9 @@ }; vdd_eth: fixedregulator-vdd-eth { + pinctrl-names = "default"; + pinctrl-0 = <&enet_enable_gpio>; + compatible = "regulator-fixed"; regulator-name = "VDD_ETH"; regulator-min-microvolt = <3300000>; @@ -243,16 +244,6 @@ >; }; - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ - >; - }; - dmic_pins: pinmux_dmic_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */ @@ -352,6 +343,29 @@ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; + + /* gpio_48 for ENET_ENABLE */ + enet_enable_gpio: pinmux_enet_enable_gpio { + pinctrl-single,pins = < + OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */ + >; + }; + + ks8851_pins: pinmux_ks8851_pins { + pinctrl-single,pins = < + /* ENET_INT */ + OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */ + /* + * Misterious pin which makes the ethernet working + * The legacy board file requested this pin on boot + * (ETH_KS8851_QUART) and set it to high, similarly to + * the ENET_ENABLE pin. + * We could use gpio-hog to keep it high, but let's use + * it as a reset GPIO for ks8851. + */ + OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.gpio_138 */ + >; + }; }; &i2c1 { @@ -452,12 +466,16 @@ pinctrl-0 = <&mcspi1_pins>; eth@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ks8851_pins>; + compatible = "ks8851"; spi-max-frequency = <24000000>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */ vdd-supply = <&vdd_eth>; + reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; }; }; @@ -619,16 +637,6 @@ status = "okay"; }; -&mcpdm { - pinctrl-names = "default"; - pinctrl-0 = <&mcpdm_pins>; - - clocks = <&twl6040>; - clock-names = "pdmclk"; - - status = "okay"; -}; - &twl_usb_comparator { usb-supply = <&vusb>; }; diff --git a/arch/arm/boot/dts/omap4-var-dvk-om44.dts b/arch/arm/boot/dts/omap4-var-dvk-om44.dts index 458d79fa378b..84fd17fb0822 100644 --- a/arch/arm/boot/dts/omap4-var-dvk-om44.dts +++ b/arch/arm/boot/dts/omap4-var-dvk-om44.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi index 676d8dd0624a..458cb53dd3d1 100644 --- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi +++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index 878923473023..6dbbc9b3229c 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 10fce28ceb5b..41de32bcf187 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -1,12 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap4460.dtsi" +#include "omap4-mcpdm.dtsi" / { model = "Variscite VAR-SOM-OM44"; @@ -74,16 +72,6 @@ >; }; - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ - >; - }; - tsc2004_pins: pinmux_tsc2004_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3) /* gpmc_ncs4.gpio_101 (irq) */ @@ -251,16 +239,6 @@ status = "disabled"; }; -&mcpdm { - pinctrl-names = "default"; - pinctrl-0 = <&mcpdm_pins>; - - clocks = <&twl6040>; - clock-names = "pdmclk"; - - status = "okay"; -}; - &gpmc { status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap4-var-stk-om44.dts b/arch/arm/boot/dts/omap4-var-stk-om44.dts index 56b64e618608..656fb29c2a15 100644 --- a/arch/arm/boot/dts/omap4-var-stk-om44.dts +++ b/arch/arm/boot/dts/omap4-var-stk-om44.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 1a96d4317c97..c43e52fd5f65 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/bus/ti-sysc.h> @@ -148,6 +145,9 @@ l4_per: interconnect@48000000 { }; + l4_abe: interconnect@40100000 { + }; + ocmcram: ocmcram@40304000 { compatible = "mmio-sram"; reg = <0x40304000 0xa000>; /* 40k */ @@ -214,130 +214,6 @@ #iommu-cells = <0>; ti,iommu-bus-err-back; }; - target-module@40130000 { - compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer3"; - reg = <0x40130000 0x4>, - <0x40130010 0x4>, - <0x40130014 0x4>; - reg-names = "rev", "sysc", "syss"; - ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | - SYSC_OMAP2_SOFTRESET)>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,syss-mask = <1>; - /* Domains (V, P, C): abe, abe_pwrdm, abe_clkdm */ - clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00000000 0x40130000 0x1000>, /* MPU private access */ - <0x49030000 0x49030000 0x0080>; /* L3 Interconnect */ - - wdt3: wdt@0 { - compatible = "ti,omap4-wdt", "ti,omap3-wdt"; - reg = <0x0 0x80>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - mcpdm: mcpdm@40132000 { - compatible = "ti,omap4-mcpdm"; - reg = <0x40132000 0x7f>, /* MPU private access */ - <0x49032000 0x7f>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mcpdm"; - dmas = <&sdma 65>, - <&sdma 66>; - dma-names = "up_link", "dn_link"; - status = "disabled"; - }; - - dmic: dmic@4012e000 { - compatible = "ti,omap4-dmic"; - reg = <0x4012e000 0x7f>, /* MPU private access */ - <0x4902e000 0x7f>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dmic"; - dmas = <&sdma 67>; - dma-names = "up_link"; - status = "disabled"; - }; - - mcbsp1: mcbsp@40122000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40122000 0xff>, /* MPU private access */ - <0x49022000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp1"; - dmas = <&sdma 33>, - <&sdma 34>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - mcbsp2: mcbsp@40124000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40124000 0xff>, /* MPU private access */ - <0x49024000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp2"; - dmas = <&sdma 17>, - <&sdma 18>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - mcbsp3: mcbsp@40126000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40126000 0xff>, /* MPU private access */ - <0x49026000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; - dmas = <&sdma 19>, - <&sdma 20>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - target-module@40128000 { - compatible = "ti,sysc-mcasp", "ti,sysc"; - ti,hwmods = "mcasp"; - reg = <0x40128000 0x4>, - <0x40128004 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00000000 0x40128000 0x1000>, /* MPU */ - <0x49028000 0x49028000 0x1000>; /* L3 */ - - /* - * Child device unsupported by davinci-mcasp. At least - * RX path is disabled for omap4, and only DIT mode - * works with no I2S. See also old Android kernel - * omap-mcasp driver for more information. - */ - }; - target-module@4012c000 { compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "slimbus1"; @@ -359,33 +235,6 @@ /* No child device binding or driver in mainline */ }; - target-module@401f1000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "aess"; - reg = <0x401f1000 0x4>, - <0x401f1010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */ - <0x490f1000 0x490f1000 0x1000>; /* L3 */ - - /* - * No child device binding or driver in mainline. - * See Android tree and related upstreaming efforts - * for the old driver. - */ - }; - dmm@4e000000 { compatible = "ti,omap4-dmm"; reg = <0x4e000000 0x800>; @@ -417,43 +266,6 @@ hw-caps-temp-alert; }; - timer5: timer@40138000 { - compatible = "ti,omap4430-timer"; - reg = <0x40138000 0x80>, - <0x49038000 0x80>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer5"; - ti,timer-dsp; - }; - - timer6: timer@4013a000 { - compatible = "ti,omap4430-timer"; - reg = <0x4013a000 0x80>, - <0x4903a000 0x80>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer6"; - ti,timer-dsp; - }; - - timer7: timer@4013c000 { - compatible = "ti,omap4430-timer"; - reg = <0x4013c000 0x80>, - <0x4903c000 0x80>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer7"; - ti,timer-dsp; - }; - - timer8: timer@4013e000 { - compatible = "ti,omap4430-timer"; - reg = <0x4013e000 0x80>, - <0x4903e000 0x80>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer8"; - ti,timer-pwm; - ti,timer-dsp; - }; - aes1: aes@4b501000 { compatible = "ti,omap4-aes"; ti,hwmods = "aes1"; @@ -629,4 +441,5 @@ }; #include "omap4-l4.dtsi" +#include "omap4-l4-abe.dtsi" #include "omap44xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi index f370d96a87e5..39297868ec85 100644 --- a/arch/arm/boot/dts/omap443x-clocks.dtsi +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP4 clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &prm_clocks { bandgap_fclk: bandgap_fclk@1888 { diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi index fb5929b742d4..0f41714cffbb 100644 --- a/arch/arm/boot/dts/omap446x-clocks.dtsi +++ b/arch/arm/boot/dts/omap446x-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP4 clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &prm_clocks { div_ts_ck: div_ts_ck@1888 { diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index 279ff2f419df..e9d9c8460682 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP4 clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &cm1_clocks { extalt_clkin_ck: extalt_clkin_ck { diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 61a06f6add3c..7fff555ee394 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap5.dtsi" #include <dt-bindings/interrupt-controller/irq.h> @@ -667,14 +664,16 @@ }; }; -&mcpdm { +&mcpdm_module { + /* Module on the SoC needs external clock from the PMIC */ pinctrl-names = "default"; pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; +&mcpdm { clocks = <&twl6040>; clock-names = "pdmclk"; - - status = "okay"; }; &mcbsp1 { diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index fef2a446b61c..76e499d89d24 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi new file mode 100644 index 000000000000..dc9d0532f4cf --- /dev/null +++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi @@ -0,0 +1,447 @@ +&l4_abe { /* 0x40100000 */ + compatible = "ti,omap5-l4-abe", "simple-bus"; + reg = <0x40100000 0x400>, + <0x40100400 0x400>; + reg-names = "la", "ap"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ + <0x49000000 0x49000000 0x100000>; + segment@0 { /* 0x40100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = + /* CPU to L4 ABE mapping */ + <0x00000000 0x00000000 0x000400>, /* ap 0 */ + <0x00000400 0x00000400 0x000400>, /* ap 1 */ + <0x00022000 0x00022000 0x001000>, /* ap 2 */ + <0x00023000 0x00023000 0x001000>, /* ap 3 */ + <0x00024000 0x00024000 0x001000>, /* ap 4 */ + <0x00025000 0x00025000 0x001000>, /* ap 5 */ + <0x00026000 0x00026000 0x001000>, /* ap 6 */ + <0x00027000 0x00027000 0x001000>, /* ap 7 */ + <0x00028000 0x00028000 0x001000>, /* ap 8 */ + <0x00029000 0x00029000 0x001000>, /* ap 9 */ + <0x0002a000 0x0002a000 0x001000>, /* ap 10 */ + <0x0002b000 0x0002b000 0x001000>, /* ap 11 */ + <0x0002e000 0x0002e000 0x001000>, /* ap 12 */ + <0x0002f000 0x0002f000 0x001000>, /* ap 13 */ + <0x00030000 0x00030000 0x001000>, /* ap 14 */ + <0x00031000 0x00031000 0x001000>, /* ap 15 */ + <0x00032000 0x00032000 0x001000>, /* ap 16 */ + <0x00033000 0x00033000 0x001000>, /* ap 17 */ + <0x00038000 0x00038000 0x001000>, /* ap 18 */ + <0x00039000 0x00039000 0x001000>, /* ap 19 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 20 */ + <0x0003b000 0x0003b000 0x001000>, /* ap 21 */ + <0x0003c000 0x0003c000 0x001000>, /* ap 22 */ + <0x0003d000 0x0003d000 0x001000>, /* ap 23 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 24 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 25 */ + <0x00080000 0x00080000 0x010000>, /* ap 26 */ + <0x00080000 0x00080000 0x001000>, /* ap 27 */ + <0x000a0000 0x000a0000 0x010000>, /* ap 28 */ + <0x000a0000 0x000a0000 0x001000>, /* ap 29 */ + <0x000c0000 0x000c0000 0x010000>, /* ap 30 */ + <0x000c0000 0x000c0000 0x001000>, /* ap 31 */ + <0x000f1000 0x000f1000 0x001000>, /* ap 32 */ + <0x000f2000 0x000f2000 0x001000>, /* ap 33 */ + + /* L3 to L4 ABE mapping */ + <0x49000000 0x49000000 0x000400>, /* ap 0 */ + <0x49000400 0x49000400 0x000400>, /* ap 1 */ + <0x49022000 0x49022000 0x001000>, /* ap 2 */ + <0x49023000 0x49023000 0x001000>, /* ap 3 */ + <0x49024000 0x49024000 0x001000>, /* ap 4 */ + <0x49025000 0x49025000 0x001000>, /* ap 5 */ + <0x49026000 0x49026000 0x001000>, /* ap 6 */ + <0x49027000 0x49027000 0x001000>, /* ap 7 */ + <0x49028000 0x49028000 0x001000>, /* ap 8 */ + <0x49029000 0x49029000 0x001000>, /* ap 9 */ + <0x4902a000 0x4902a000 0x001000>, /* ap 10 */ + <0x4902b000 0x4902b000 0x001000>, /* ap 11 */ + <0x4902e000 0x4902e000 0x001000>, /* ap 12 */ + <0x4902f000 0x4902f000 0x001000>, /* ap 13 */ + <0x49030000 0x49030000 0x001000>, /* ap 14 */ + <0x49031000 0x49031000 0x001000>, /* ap 15 */ + <0x49032000 0x49032000 0x001000>, /* ap 16 */ + <0x49033000 0x49033000 0x001000>, /* ap 17 */ + <0x49038000 0x49038000 0x001000>, /* ap 18 */ + <0x49039000 0x49039000 0x001000>, /* ap 19 */ + <0x4903a000 0x4903a000 0x001000>, /* ap 20 */ + <0x4903b000 0x4903b000 0x001000>, /* ap 21 */ + <0x4903c000 0x4903c000 0x001000>, /* ap 22 */ + <0x4903d000 0x4903d000 0x001000>, /* ap 23 */ + <0x4903e000 0x4903e000 0x001000>, /* ap 24 */ + <0x4903f000 0x4903f000 0x001000>, /* ap 25 */ + <0x49080000 0x49080000 0x010000>, /* ap 26 */ + <0x49080000 0x49080000 0x001000>, /* ap 27 */ + <0x490a0000 0x490a0000 0x010000>, /* ap 28 */ + <0x490a0000 0x490a0000 0x001000>, /* ap 29 */ + <0x490c0000 0x490c0000 0x010000>, /* ap 30 */ + <0x490c0000 0x490c0000 0x001000>, /* ap 31 */ + <0x490f1000 0x490f1000 0x001000>, /* ap 32 */ + <0x490f2000 0x490f2000 0x001000>; /* ap 33 */ + + target-module@22000 { /* 0x40122000, ap 2 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp1"; + reg = <0x2208c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_MCBSP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>, + <0x49022000 0x49022000 0x1000>; + + mcbsp1: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@24000 { /* 0x40124000, ap 4 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp2"; + reg = <0x2408c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_MCBSP2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>, + <0x49024000 0x49024000 0x1000>; + + mcbsp2: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@26000 { /* 0x40126000, ap 6 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp3"; + reg = <0x2608c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_MCBSP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>, + <0x49026000 0x49026000 0x1000>; + + mcbsp3: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@28000 { /* 0x40128000, ap 8 08.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>, + <0x49028000 0x49028000 0x1000>; + }; + + target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>, + <0x4902a000 0x4902a000 0x1000>; + }; + + target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "dmic"; + reg = <0x2e000 0x4>, + <0x2e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_DMIC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>, + <0x4902e000 0x4902e000 0x1000>; + + dmic: dmic@0 { + compatible = "ti,omap4-dmic"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 67>; + dma-names = "up_link"; + status = "disabled"; + }; + }; + + target-module@30000 { /* 0x40130000, ap 14 0e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>, + <0x49030000 0x49030000 0x1000>; + }; + + mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcpdm"; + reg = <0x32000 0x4>, + <0x32010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_MCPDM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>, + <0x49032000 0x49032000 0x1000>; + + /* Must be only enabled for boards with pdmclk wired */ + status = "disabled"; + + mcpdm: mcpdm@0 { + compatible = "ti,omap4-mcpdm"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; + }; + }; + + target-module@38000 { /* 0x40138000, ap 18 12.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer5"; + reg = <0x38000 0x4>, + <0x38010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x1000>, + <0x49038000 0x49038000 0x1000>; + + timer5: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>, + <0x49038000 0x80>; + clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + ti,timer-pwm; + }; + }; + + target-module@3a000 { /* 0x4013a000, ap 20 14.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer6"; + reg = <0x3a000 0x4>, + <0x3a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3a000 0x1000>, + <0x4903a000 0x4903a000 0x1000>; + + timer6: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>, + <0x4903a000 0x80>; + clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + ti,timer-pwm; + }; + }; + + target-module@3c000 { /* 0x4013c000, ap 22 16.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer7"; + reg = <0x3c000 0x4>, + <0x3c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x1000>, + <0x4903c000 0x4903c000 0x1000>; + + timer7: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>, + <0x4903c000 0x80>; + clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + }; + }; + + target-module@3e000 { /* 0x4013e000, ap 24 18.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer8"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>, + <0x4903e000 0x4903e000 0x1000>; + + timer8: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>, + <0x4903e000 0x80>; + clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + ti,timer-pwm; + }; + }; + + target-module@80000 { /* 0x40180000, ap 26 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>, + <0x49080000 0x49080000 0x10000>; + }; + + target-module@a0000 { /* 0x401a0000, ap 28 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x10000>, + <0x490a0000 0x490a0000 0x10000>; + }; + + target-module@c0000 { /* 0x401c0000, ap 30 1e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc0000 0x10000>, + <0x490c0000 0x490c0000 0x10000>; + }; + + target-module@f1000 { /* 0x401f1000, ap 32 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf1000 0x1000>, + <0x490f1000 0x490f1000 0x1000>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 592e17fd4eeb..9441e9a572ad 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 2fefaafdf901..edfd26c03462 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -1,9 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. * Based on "omap4.dtsi" */ @@ -161,6 +159,9 @@ l4_per: interconnect@48000000 { }; + l4_abe: interconnect@40100000 { + }; + ocmcram: ocmcram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x20000>; /* 128k */ @@ -202,115 +203,6 @@ ti,iommu-bus-err-back; }; - mcpdm: mcpdm@40132000 { - compatible = "ti,omap4-mcpdm"; - reg = <0x40132000 0x7f>, /* MPU private access */ - <0x49032000 0x7f>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mcpdm"; - dmas = <&sdma 65>, - <&sdma 66>; - dma-names = "up_link", "dn_link"; - status = "disabled"; - }; - - dmic: dmic@4012e000 { - compatible = "ti,omap4-dmic"; - reg = <0x4012e000 0x7f>, /* MPU private access */ - <0x4902e000 0x7f>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dmic"; - dmas = <&sdma 67>; - dma-names = "up_link"; - status = "disabled"; - }; - - mcbsp1: mcbsp@40122000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40122000 0xff>, /* MPU private access */ - <0x49022000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp1"; - dmas = <&sdma 33>, - <&sdma 34>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - mcbsp2: mcbsp@40124000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40124000 0xff>, /* MPU private access */ - <0x49024000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp2"; - dmas = <&sdma 17>, - <&sdma 18>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - mcbsp3: mcbsp@40126000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40126000 0xff>, /* MPU private access */ - <0x49026000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; - dmas = <&sdma 19>, - <&sdma 20>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - timer5: timer@40138000 { - compatible = "ti,omap5430-timer"; - reg = <0x40138000 0x80>, - <0x49038000 0x80>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer5"; - ti,timer-dsp; - ti,timer-pwm; - }; - - timer6: timer@4013a000 { - compatible = "ti,omap5430-timer"; - reg = <0x4013a000 0x80>, - <0x4903a000 0x80>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer6"; - ti,timer-dsp; - ti,timer-pwm; - }; - - timer7: timer@4013c000 { - compatible = "ti,omap5430-timer"; - reg = <0x4013c000 0x80>, - <0x4903c000 0x80>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer7"; - ti,timer-dsp; - }; - - timer8: timer@4013e000 { - compatible = "ti,omap5430-timer"; - reg = <0x4013e000 0x80>, - <0x4903e000 0x80>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer8"; - ti,timer-dsp; - ti,timer-pwm; - }; - dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; @@ -517,3 +409,6 @@ &core_thermal { coefficients = <0 2000>; }; + +#include "omap5-l4-abe.dtsi" +#include "omap54xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index ecc5573d264c..33e8dd905bff 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP5 clock data * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &cm_core_aon_clocks { pad_clks_src_ck: pad_clks_src_ck { diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts index 8c2449da6f00..422958d13d42 100644 --- a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts +++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts @@ -19,6 +19,7 @@ compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x4000000>; /* 64 MB */ }; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index b545d0f228a5..0043e0040153 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -25,6 +25,7 @@ compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x4000000>; /* 64 MB */ }; diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts index 0d97ded66257..2fbc17d6dfa4 100644 --- a/arch/arm/boot/dts/orion5x-lswsgl.dts +++ b/arch/arm/boot/dts/orion5x-lswsgl.dts @@ -55,6 +55,7 @@ compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x8000000>; /* 128 MB */ }; diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts index 0324cb54939d..0ca6208a267d 100644 --- a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts +++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts @@ -19,6 +19,7 @@ compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x4000000>; /* 64 MB */ }; diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts index 9f6ae4e1de06..ea081afa469d 100644 --- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts +++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts @@ -21,6 +21,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x2000000>; /* 32 MB */ }; diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts index d1817af53e0b..487324f7c54e 100644 --- a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts +++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts @@ -16,6 +16,7 @@ compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x4000000>; /* 64 MB */ }; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index fbccfbbab223..61e631b3fd8b 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -6,11 +6,11 @@ * warranty of any kind, whether express or implied. */ -#include "skeleton.dtsi" - #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; model = "Marvell Orion5x SoC"; compatible = "marvell,orion5x"; interrupt-parent = <&intc>; diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts index ac3250ae8fc4..7e2fcb220aea 100644 --- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts +++ b/arch/arm/boot/dts/ox810se-wd-mbwe.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition * * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - * - * Licensed under GPLv2 or later */ /dts-v1/; diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi index c2b48a1838eb..9f6c2b660ed3 100644 --- a/arch/arm/boot/dts/ox810se.dtsi +++ b/arch/arm/boot/dts/ox810se.dtsi @@ -1,16 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC * * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - * - * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" #include <dt-bindings/clock/oxsemi,ox810se.h> #include <dt-bindings/reset/oxsemi,ox810se.h> / { + #address-cells = <1>; + #size-cells = <1>; compatible = "oxsemi,ox810se"; cpus { @@ -25,6 +25,7 @@ }; memory { + device_type = "memory"; /* Max 256MB @ 0x48000000 */ reg = <0x48000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts index bfde32e37123..c3daceccde55 100644 --- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts +++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 * * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - * - * Licensed under GPLv2 or later */ /dts-v1/; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index 085bbd33eadc..c9b327732063 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -1,17 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC * * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - * - * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/oxsemi,ox820.h> #include <dt-bindings/reset/oxsemi,ox820.h> / { + #address-cells = <1>; + #size-cells = <1>; compatible = "oxsemi,ox820"; cpus { @@ -35,6 +35,7 @@ }; memory { + device_type = "memory"; /* Max 512MB @ 0x60000000 */ reg = <0x60000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi index a1266cf8776c..5ae860788339 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi @@ -1,16 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Picochip, Jamie Iles - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ -/include/ "skeleton.dtsi" / { model = "Picochip picoXcell PC3X2"; compatible = "picochip,pc3x2"; diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi index d78cd207eca1..fa93155fadb7 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi @@ -1,16 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Picochip, Jamie Iles - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ -/include/ "skeleton.dtsi" / { model = "Picochip picoXcell PC3X3"; compatible = "picochip,pc3x3"; diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts index 0c9729306089..3626e5380681 100644 --- a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts +++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Picochip, Jamie Iles - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts index 86f26715b619..3eca65e8ee09 100644 --- a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts +++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Picochip, Jamie Iles - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 927d00cab014..4dfe0f15d7bd 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * pm9g45.dts - Device Tree file for Ronetix pm9g45 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ /dts-v1/; #include "at91sam9g45.dtsi" diff --git a/arch/arm/boot/dts/prima2-evb.dts b/arch/arm/boot/dts/prima2-evb.dts index 57286b4e7b87..7394f764df65 100644 --- a/arch/arm/boot/dts/prima2-evb.dts +++ b/arch/arm/boot/dts/prima2-evb.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for CSR SiRFprimaII Evaluation Board * * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ /dts-v1/; @@ -15,6 +14,7 @@ compatible = "sirf,prima2", "sirf,prima2-cb"; memory { + device_type = "memory"; reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 1ca1a9aa953f..9c7b46b90c3c 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -1,12 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for CSR SiRFprimaII SoC * * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" / { compatible = "sirf,prima2"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/pxa168-aspenite.dts index 0a988b3fb248..2ad40e373194 100644 --- a/arch/arm/boot/dts/pxa168-aspenite.dts +++ b/arch/arm/boot/dts/pxa168-aspenite.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Marvell Technology Group Ltd. * Author: Haojian Zhuang <haojian.zhuang@marvell.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi index b899e25cbb1b..72f8cb60cb53 100644 --- a/arch/arm/boot/dts/pxa168.dtsi +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -1,16 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Marvell Technology Group Ltd. * Author: Haojian Zhuang <haojian.zhuang@marvell.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/marvell,pxa168.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart1; serial1 = &uart2; diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi index 8494b5787170..a248bf038033 100644 --- a/arch/arm/boot/dts/pxa25x.dtsi +++ b/arch/arm/boot/dts/pxa25x.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "pxa2xx.dtsi" #include "dt-bindings/clock/pxa-clock.h" diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index e83879d97aea..84154c43fe65 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -1,12 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC * * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> - * - * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include "dt-bindings/clock/pxa-clock.h" #define PMGROUP(pin) #pin @@ -29,6 +27,8 @@ } / { + #address-cells = <1>; + #size-cells = <1>; model = "Marvell PXA2xx family SoC"; compatible = "marvell,pxa2xx"; interrupt-parent = <&pxairq>; diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts index c82f2810ec73..0f899e672e82 100644 --- a/arch/arm/boot/dts/pxa910-dkb.dts +++ b/arch/arm/boot/dts/pxa910-dkb.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Marvell Technology Group Ltd. * Author: Haojian Zhuang <haojian.zhuang@marvell.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ /dts-v1/; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index 0868f6729be1..b3d6182d4de4 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -1,16 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Marvell Technology Group Ltd. * Author: Haojian Zhuang <haojian.zhuang@marvell.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/marvell,pxa910.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart1; serial1 = &uart2; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 497bb065eb9d..4e6c50d45cb2 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -93,9 +93,8 @@ vdd-supply = <&pm8058_l14>; // 2.85V aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>; capella,aset-resistance-ohms = <100000>; - /* GPIO34 has interrupt 225 on the PM8058 */ /* Trig on both edges - getting close or far away */ - interrupts-extended = <&pm8058 225 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>; /* MPP05 analog input to the XOADC */ io-channels = <&xoadc 0x00 0x05>; io-channel-names = "aout"; @@ -515,9 +514,8 @@ ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - /* FIXME: GPIO33 has interrupt 224 on the PM8058 */ - interrupt-parent = <&pm8058>; - interrupts = <224 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&pm8058_gpio>; + interrupts = <33 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_ak8975_gpios>; vid-supply = <&pm8058_lvs0>; // 1.8V @@ -526,9 +524,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; - /* FIXME: GPIO16 has interrupt 207 on the PM8058 */ - interrupt-parent = <&pm8058>; - interrupts = <207 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&pm8058_gpio>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&dragon_bmp085_gpios>; @@ -539,12 +536,11 @@ compatible = "invensense,mpu3050"; reg = <0x68>; /* - * GPIO17 has interrupt 208 on the - * PM8058, it is pulled high by a 10k + * GPIO17 is pulled high by a 10k * resistor to VLOGIC so needs to be * active low/falling edge. */ - interrupts-extended = <&pm8058 208 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_mpu3050_gpios>; vlogic-supply = <&pm8058_lvs0>; // 1.8V @@ -589,11 +585,10 @@ compatible = "smsc,lan9221", "smsc,lan9115"; reg = <2 0x0 0x100>; /* - * GPIO7 has interrupt 198 on the PM8058 * The second interrupt is the PME interrupt * for network wakeup, connected to the TLMM. */ - interrupts-extended = <&pm8058 198 IRQ_TYPE_EDGE_FALLING>, + interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>, <&tlmm 29 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; vdd33a-supply = <&dragon_veth>; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 48c3cf427610..65975df6a8c3 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> @@ -10,6 +9,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm APQ8064"; compatible = "qcom,apq8064"; interrupt-parent = <&intc>; @@ -94,6 +95,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + thermal-zones { cpu-thermal0 { polling-delay-passive = <250>; @@ -705,51 +711,10 @@ compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio"; reg = <0x150>; - interrupts = <192 IRQ_TYPE_NONE>, - <193 IRQ_TYPE_NONE>, - <194 IRQ_TYPE_NONE>, - <195 IRQ_TYPE_NONE>, - <196 IRQ_TYPE_NONE>, - <197 IRQ_TYPE_NONE>, - <198 IRQ_TYPE_NONE>, - <199 IRQ_TYPE_NONE>, - <200 IRQ_TYPE_NONE>, - <201 IRQ_TYPE_NONE>, - <202 IRQ_TYPE_NONE>, - <203 IRQ_TYPE_NONE>, - <204 IRQ_TYPE_NONE>, - <205 IRQ_TYPE_NONE>, - <206 IRQ_TYPE_NONE>, - <207 IRQ_TYPE_NONE>, - <208 IRQ_TYPE_NONE>, - <209 IRQ_TYPE_NONE>, - <210 IRQ_TYPE_NONE>, - <211 IRQ_TYPE_NONE>, - <212 IRQ_TYPE_NONE>, - <213 IRQ_TYPE_NONE>, - <214 IRQ_TYPE_NONE>, - <215 IRQ_TYPE_NONE>, - <216 IRQ_TYPE_NONE>, - <217 IRQ_TYPE_NONE>, - <218 IRQ_TYPE_NONE>, - <219 IRQ_TYPE_NONE>, - <220 IRQ_TYPE_NONE>, - <221 IRQ_TYPE_NONE>, - <222 IRQ_TYPE_NONE>, - <223 IRQ_TYPE_NONE>, - <224 IRQ_TYPE_NONE>, - <225 IRQ_TYPE_NONE>, - <226 IRQ_TYPE_NONE>, - <227 IRQ_TYPE_NONE>, - <228 IRQ_TYPE_NONE>, - <229 IRQ_TYPE_NONE>, - <230 IRQ_TYPE_NONE>, - <231 IRQ_TYPE_NONE>, - <232 IRQ_TYPE_NONE>, - <233 IRQ_TYPE_NONE>, - <234 IRQ_TYPE_NONE>, - <235 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; + gpio-ranges = <&pm8921_gpio 0 0 44>; #gpio-cells = <2>; }; @@ -1338,8 +1303,9 @@ <0x04700300 0x200>, <0x04700500 0x5c>; reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator"; - clock-names = "iface_clk"; - clocks = <&mmcc DSI_M_AHB_CLK>; + clock-names = "iface_clk", "ref"; + clocks = <&mmcc DSI_M_AHB_CLK>, + <&cxo_board>; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 899f28533ed7..0a0fb147ebb9 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -1,12 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include "skeleton.dtsi" - #include <dt-bindings/clock/qcom,gcc-apq8084.h> #include <dt-bindings/gpio/gpio.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm APQ 8084"; compatible = "qcom,apq8084"; interrupt-parent = <&intc>; @@ -87,6 +87,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + firmware { scm { compatible = "qcom,scm"; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 2d56008d8d6b..56f51599852d 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -1,24 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; -#include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-ipq4019.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + model = "Qualcomm Technologies, Inc. IPQ4019"; compatible = "qcom,ipq4019"; interrupt-parent = <&intc>; @@ -133,6 +127,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | @@ -393,10 +392,10 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 - 0x82000000 0 0x40300000 0x40300000 0 0x400000>; + ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, + <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index f793cd1ad6d0..16c0da97932c 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-ipq806x.h> #include <dt-bindings/clock/qcom,lcc-ipq806x.h> @@ -11,6 +10,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm IPQ8064"; compatible = "qcom,ipq8064"; interrupt-parent = <&intc>; @@ -45,6 +46,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi index 7869898e392d..26b034bd19d2 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi @@ -50,6 +50,7 @@ compatible = "swir,wp8548", "qcom,mdm9615"; memory { + device_type = "memory"; reg = <0x48000000 0x7F00000>; }; }; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index c852b69229c9..356e9535f7a6 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -45,8 +45,6 @@ /dts-v1/; -/include/ "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-mdm9615.h> #include <dt-bindings/reset/qcom,gcc-mdm9615.h> @@ -54,6 +52,8 @@ #include <dt-bindings/soc/qcom,gsbi.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm MDM9615"; compatible = "qcom,mdm9615"; interrupt-parent = <&intc>; @@ -323,14 +323,10 @@ pmicgpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; - interrupt-parent = <&pmicintc>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>, - <28 IRQ_TYPE_NONE>, - <29 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; + gpio-ranges = <&pmicgpio 0 0 6>; #gpio-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 70698941f64c..ec5cbc468bd3 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -1,14 +1,14 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8660.h> #include <dt-bindings/soc/qcom,gsbi.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm MSM8660"; compatible = "qcom,msm8660"; interrupt-parent = <&intc>; @@ -39,6 +39,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + cpu-pmu { compatible = "qcom,scorpion-mp-pmu"; interrupts = <1 9 0x304>; @@ -133,6 +138,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; + status = "disabled"; syscon-tcsr = <&tcsr>; @@ -140,7 +146,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16540000 0x1000>, <0x16500000 0x1000>; - interrupts = <GIC_SPI 156 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -149,7 +155,7 @@ gsbi6_i2c: i2c@16580000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x16580000 0x1000>; - interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -167,6 +173,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; + status = "disabled"; syscon-tcsr = <&tcsr>; @@ -174,7 +181,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, <0x16600000 0x1000>; - interrupts = <GIC_SPI 158 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -183,7 +190,7 @@ gsbi7_i2c: i2c@16680000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x16680000 0x1000>; - interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -207,7 +214,7 @@ gsbi8_i2c: i2c@19880000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x19880000 0x1000>; - interrupts = <GIC_SPI 161 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -232,7 +239,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; - interrupts = <0 195 IRQ_TYPE_NONE>; + interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -241,7 +248,7 @@ gsbi12_i2c: i2c@19c80000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x19c80000 0x1000>; - interrupts = <0 196 IRQ_TYPE_NONE>; + interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -285,52 +292,10 @@ compatible = "qcom,pm8058-gpio", "qcom,ssbi-gpio"; reg = <0x150>; - interrupt-parent = <&pm8058>; - interrupts = <192 IRQ_TYPE_NONE>, - <193 IRQ_TYPE_NONE>, - <194 IRQ_TYPE_NONE>, - <195 IRQ_TYPE_NONE>, - <196 IRQ_TYPE_NONE>, - <197 IRQ_TYPE_NONE>, - <198 IRQ_TYPE_NONE>, - <199 IRQ_TYPE_NONE>, - <200 IRQ_TYPE_NONE>, - <201 IRQ_TYPE_NONE>, - <202 IRQ_TYPE_NONE>, - <203 IRQ_TYPE_NONE>, - <204 IRQ_TYPE_NONE>, - <205 IRQ_TYPE_NONE>, - <206 IRQ_TYPE_NONE>, - <207 IRQ_TYPE_NONE>, - <208 IRQ_TYPE_NONE>, - <209 IRQ_TYPE_NONE>, - <210 IRQ_TYPE_NONE>, - <211 IRQ_TYPE_NONE>, - <212 IRQ_TYPE_NONE>, - <213 IRQ_TYPE_NONE>, - <214 IRQ_TYPE_NONE>, - <215 IRQ_TYPE_NONE>, - <216 IRQ_TYPE_NONE>, - <217 IRQ_TYPE_NONE>, - <218 IRQ_TYPE_NONE>, - <219 IRQ_TYPE_NONE>, - <220 IRQ_TYPE_NONE>, - <221 IRQ_TYPE_NONE>, - <222 IRQ_TYPE_NONE>, - <223 IRQ_TYPE_NONE>, - <224 IRQ_TYPE_NONE>, - <225 IRQ_TYPE_NONE>, - <226 IRQ_TYPE_NONE>, - <227 IRQ_TYPE_NONE>, - <228 IRQ_TYPE_NONE>, - <229 IRQ_TYPE_NONE>, - <230 IRQ_TYPE_NONE>, - <231 IRQ_TYPE_NONE>, - <232 IRQ_TYPE_NONE>, - <233 IRQ_TYPE_NONE>, - <234 IRQ_TYPE_NONE>, - <235 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; + gpio-ranges = <&pm8058_gpio 0 0 44>; #gpio-cells = <2>; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 1733d8f40ab1..f2aeaccdc1ad 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -1,14 +1,14 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/mfd/qcom-rpm.h> #include <dt-bindings/soc/qcom,gsbi.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm MSM8960"; compatible = "qcom,msm8960"; interrupt-parent = <&intc>; @@ -44,6 +44,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 10 0x304>; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 51444c53fc72..b3b04736a159 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -220,6 +220,20 @@ }; }; }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; }; &soc { @@ -242,6 +256,30 @@ }; }; + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + i2c1_pins: i2c1 { + mux { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c3_pins: i2c3 { mux { pins = "gpio10", "gpio11"; @@ -283,6 +321,32 @@ pinctrl-0 = <&sdhc1_pin_a>; }; + sdhci@f98a4900 { + status = "ok"; + + max-frequency = <100000000>; + bus-width = <4>; + non-removable; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; + }; + gpio-keys { compatible = "gpio-keys"; input-name = "gpio-keys"; @@ -342,6 +406,24 @@ }; }; + i2c@f9923000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + charger: bq24192@6b { + compatible = "ti,bq24192"; + reg = <0x6b>; + interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; + }; + }; + i2c@f9925000 { status = "ok"; pinctrl-names = "default"; @@ -359,6 +441,31 @@ amstaos,proximity-diodes = <0>; }; }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; }; &spmi_bus { @@ -371,6 +478,29 @@ bias-pull-up; power-source = <PM8941_GPIO_S3>; }; + + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_regulator_pin: wl-reg-active { + pins = "gpio17"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; + + otg { + gpio-hog; + gpios = <35 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "otg-gpio"; + }; }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index ca266a5f021d..45b5c8ef0374 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -6,9 +6,10 @@ #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm MSM8974"; compatible = "qcom,msm8974"; interrupt-parent = <&intc>; @@ -130,6 +131,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + thermal-zones { cpu-thermal0 { polling-delay-passive = <250>; @@ -706,6 +712,17 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; + i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@f9924000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 2515c5c217ac..f198480c8ef4 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -63,43 +63,10 @@ compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8941_gpios 0 0 36>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>, - <0 0xd6 0 IRQ_TYPE_NONE>, - <0 0xd7 0 IRQ_TYPE_NONE>, - <0 0xd8 0 IRQ_TYPE_NONE>, - <0 0xd9 0 IRQ_TYPE_NONE>, - <0 0xda 0 IRQ_TYPE_NONE>, - <0 0xdb 0 IRQ_TYPE_NONE>, - <0 0xdc 0 IRQ_TYPE_NONE>, - <0 0xdd 0 IRQ_TYPE_NONE>, - <0 0xde 0 IRQ_TYPE_NONE>, - <0 0xdf 0 IRQ_TYPE_NONE>, - <0 0xe0 0 IRQ_TYPE_NONE>, - <0 0xe1 0 IRQ_TYPE_NONE>, - <0 0xe2 0 IRQ_TYPE_NONE>, - <0 0xe3 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; boost_bypass_n_pin: boost-bypass { pins = "gpio21"; diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index aac7e73b6872..ea1ca166165c 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -31,29 +31,10 @@ compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pma8084_gpios 0 0 22>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; pma8084_mpps: mpps@a000 { diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index 8ee44a100e9a..ff24301dc1be 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -34,12 +34,23 @@ }; leds { - status = "okay"; compatible = "gpio-leds"; led0 { gpios = <&port7 1 GPIO_ACTIVE_LOW>; }; + + led1 { + gpios = <&io_expander1 0 GPIO_ACTIVE_LOW>; + }; + + led2 { + gpios = <&io_expander1 1 GPIO_ACTIVE_LOW>; + }; + + led3 { + gpios = <&io_expander1 2 GPIO_ACTIVE_LOW>; + }; }; }; @@ -47,6 +58,34 @@ clock-frequency = <13330000>; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + + clock-frequency = <400000>; + + io_expander1: gpio@20 { + compatible = "onnn,cat9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + io_expander2: gpio@21 { + compatible = "onnn,cat9554"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "renesas,r1ex24016", "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + &usb_x1_clk { clock-frequency = <48000000>; }; @@ -56,6 +95,11 @@ }; &pinctrl { + /* RIIC ch3 (Port Expander, EEPROM (MAC Addr), Audio Codec) */ + i2c3_pins: i2c3 { + pinmux = <RZA1_PINMUX(1, 6, 1)>, /* RIIC3SCL */ + <RZA1_PINMUX(1, 7, 1)>; /* RIIC3SDA */ + }; /* Serial Console */ scif2_pins: serial2 { diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts new file mode 100644 index 000000000000..991e09de1219 --- /dev/null +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZA2MEVB board + * + * Copyright (C) 2018 Renesas Electronics + * + */ + +/dts-v1/; +#include "r7s9210.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/r7s9210-pinctrl.h> + +/ { + model = "RZA2MEVB"; + compatible = "renesas,rza2mevb", "renesas,r7s9210"; + + aliases { + serial0 = &scif4; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x00800000>; /* HyperRAM */ + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; + + leds { + compatible = "gpio-leds"; + + red { + gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>; + }; + green { + gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* EXTAL */ +&extal_clk { + clock-frequency = <24000000>; /* 24MHz */ +}; + +/* RTC_X1 */ +&rtc_x1_clk { + clock-frequency = <32768>; +}; + +&pinctrl { + /* Serial Console */ + scif4_pins: serial4 { + pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */ + <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */ + }; +}; + +/* High resolution System tick timers */ +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + +/* Serial Console */ +&scif4 { + pinctrl-names = "default"; + pinctrl-0 = <&scif4_pins>; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi new file mode 100644 index 000000000000..22baa96f5974 --- /dev/null +++ b/arch/arm/boot/dts/r7s9210.dtsi @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the R7S9210 SoC + * + * Copyright (C) 2018 Renesas Electronics Corporation + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r7s9210-cpg-mssr.h> + +/ { + compatible = "renesas,r7s9210"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + /* External clocks */ + extal_clk: extal { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* Value must be set by board */ + clock-frequency = <0>; + }; + + rtc_x1_clk: rtc_x1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value (32678) must be set by board */ + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + clock-frequency = <528000000>; + next-level-cache = <&L2>; + }; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + L2: cache-controller@1f003000 { + compatible = "arm,pl310-cache"; + reg = <0x1f003000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + arm,early-bresp-disable; + arm,full-line-zero-disable; + cache-unified; + cache-level = <2>; + }; + + scif0: serial@e8007000 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8007000 0x18>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 47>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif1: serial@e8007800 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8007800 0x18>; + interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 46>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif2: serial@e8008000 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8008000 0x18>; + interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 45>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif3: serial@e8008800 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8008800 0x18>; + interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 44>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif4: serial@e8009000 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8009000 0x18>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 43>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm0: timer@e803b000 { + compatible = "renesas,r7s9210-ostm", "renesas,ostm"; + reg = <0xe803b000 0x30>; + interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 36>; + clock-names = "ostm0"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm1: timer@e803c000 { + compatible = "renesas,r7s9210-ostm", "renesas,ostm"; + reg = <0xe803c000 0x30>; + interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 35>; + clock-names = "ostm1"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm2: timer@e803d000 { + compatible = "renesas,r7s9210-ostm", "renesas,ostm"; + reg = <0xe803d000 0x30>; + interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 34>; + clock-names = "ostm2"; + power-domains = <&cpg>; + status = "disabled"; + }; + + gic: interrupt-controller@e8221000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0xe8221000 0x1000>, + <0xe8222000 0x1000>; + }; + + cpg: clock-controller@fcfe0010 { + compatible = "renesas,r7s9210-cpg-mssr"; + reg = <0xfcfe0010 0x455>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + }; + + wdt: watchdog@fcfe7000 { + compatible = "renesas,r7s9210-wdt", "renesas,rza-wdt"; + reg = <0xfcfe7000 0x26>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R7S9210_CLK_P0>; + }; + + bsid: chipid@fcfe8004 { + compatible = "renesas,bsid"; + reg = <0xfcfe8004 4>; + }; + + pinctrl: pin-controller@fcffe000 { + compatible = "renesas,r7s9210-pinctrl"; + reg = <0xfcffe000 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 176>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index d530f451467e..f70f4a3e5c43 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -166,6 +166,33 @@ }; &bsc { + flash@0 { + compatible = "cfi-flash", "mtd-rom"; + reg = <0x0 0x08000000>; + bank-width = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "uboot-env"; + reg = <0x00040000 0x00040000>; + read-only; + }; + partition@80000 { + label = "flash"; + reg = <0x00080000 0x07f80000>; + }; + }; + }; + ethernet@8000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x08000000 0x1000>; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 3adc158a40bb..de981d629bdd 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -15,25 +15,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &iic0; - i2c7 = &iic1; - i2c8 = &iic3; - spi0 = &qspi; - spi1 = &msiof0; - spi2 = &msiof1; - spi3 = &msiof2; - vin0 = &vin0; - vin1 = &vin1; - vin2 = &vin2; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. @@ -154,6 +135,16 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a7743-wdt", + "renesas,rcar-gen2-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7743", "renesas,rcar-gen2-gpio"; @@ -310,16 +301,6 @@ reg = <0 0xe6160000 0 0x100>; }; - rwdt: watchdog@e6020000 { - compatible = "renesas,r8a7743-wdt", - "renesas,rcar-gen2-wdt"; - reg = <0 0xe6020000 0 0x0c>; - clocks = <&cpg CPG_MOD 402>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 402>; - status = "disabled"; - }; - sysc: system-controller@e6180000 { compatible = "renesas,r8a7743-sysc"; reg = <0 0xe6180000 0 0x200>; @@ -564,9 +545,7 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7743", - "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7743"; reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 926>; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index 04148d608fc4..fa74a262107b 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -998,6 +998,54 @@ status = "disabled"; }; + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 000>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 208>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 205>; + status = "disabled"; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; @@ -1068,54 +1116,6 @@ status = "disabled"; }; - msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7744", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e20000 0 0x0064>; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 000>; - dmas = <&dmac0 0x51>, <&dmac0 0x52>, - <&dmac1 0x51>, <&dmac1 0x52>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - #address-cells = <1>; - #size-cells = <0>; - resets = <&cpg 000>; - status = "disabled"; - }; - - msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7744", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e10000 0 0x0064>; - interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 208>; - dmas = <&dmac0 0x55>, <&dmac0 0x56>, - <&dmac1 0x55>, <&dmac1 0x56>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - #address-cells = <1>; - #size-cells = <0>; - resets = <&cpg 208>; - status = "disabled"; - }; - - msiof2: spi@e6e00000 { - compatible = "renesas,msiof-r8a7744", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e00000 0 0x0064>; - interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 205>; - dmas = <&dmac0 0x41>, <&dmac0 0x42>, - <&dmac1 0x41>, <&dmac1 0x42>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - #address-cells = <1>; - #size-cells = <0>; - resets = <&cpg 205>; - status = "disabled"; - }; - can0: can@e6e80000 { compatible = "renesas,can-r8a7744", "renesas,rcar-gen2-can"; @@ -1589,33 +1589,6 @@ resets = <&cpg 408>; }; - vsp@fe928000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe928000 0 0x8000>; - interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 131>; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - resets = <&cpg 131>; - }; - - vsp@fe930000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe930000 0 0x8000>; - interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 128>; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - resets = <&cpg 128>; - }; - - vsp@fe938000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe938000 0 0x8000>; - interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 127>; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - resets = <&cpg 127>; - }; - pciec: pcie@fe000000 { compatible = "renesas,pcie-r8a7744", "renesas,pcie-rcar-gen2"; @@ -1644,9 +1617,42 @@ status = "disabled"; }; + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; + + vsp@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 128>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 128>; + }; + + vsp@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 127>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 127>; + }; + du: display@feb00000 { - reg = <0 0xfeb00000 0 0x40000>, - <0 0xfeb90000 0 0x1c>; + compatible = "renesas,du-r8a7744"; + reg = <0 0xfeb00000 0 0x40000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + status = "disabled"; ports { #address-cells = <1>; @@ -1660,10 +1666,36 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7744-lvds"; + reg = <0 0xfeb90000 0 0x1c>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; - /* placeholder */ }; prr: chipid@ff000044 { diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts index 40b7f98d6013..2840eb0d6fd4 100644 --- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts +++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts @@ -22,6 +22,17 @@ stdout-path = "serial1:115200n8"; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + memory@40000000 { device_type = "memory"; reg = <0 0x40000000 0 0x20000000>; @@ -80,16 +91,114 @@ status = "okay"; }; +&du { + pinctrl-0 = <&du0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; +}; + +&ehci1 { + status = "okay"; +}; + &extal_clk { clock-frequency = <20000000>; }; +&gpio2 { + interrupt-fixup { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; + line-name = "hdmi-hpd-int"; + input; + }; +}; + +&hsusb0 { + status = "okay"; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; +}; + +&i2c4 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <100000>; + + hdmi@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + interrupt-parent = <&gpio2>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + + port@1 { + reg = <1>; + bridge_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&ohci1 { + status = "okay"; +}; + &pfc { avb_pins: avb { groups = "avb_mdio", "avb_gmii_tx_rx"; function = "avb"; }; + du0_pins: du0 { + groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out"; + function = "du0"; + }; + + i2c4_pins: i2c4 { + groups = "i2c4_e"; + function = "i2c4"; + }; + + i2c3_pins: i2c3 { + groups = "i2c3_c"; + function = "i2c3"; + }; + mmc_pins_uhs: mmc_uhs { groups = "mmc_data8", "mmc_ctrl"; function = "mmc"; @@ -117,6 +226,16 @@ function = "sdhi2"; power-source = <1800>; }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; }; &qspi0 { @@ -177,3 +296,25 @@ sd-uhs-sdr50; status = "okay"; }; + +&usb2_phy0 { + status = "okay"; +}; + +&usb2_phy1 { + status = "okay"; +}; + +&usbphy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usbphy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index f4e232bf9d03..56cb10b42ed9 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -325,6 +325,77 @@ status = "disabled"; }; + hsusb0: hsusb@e6590000 { + compatible = "renesas,usbhs-r8a77470", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac00 0>, <&usb_dmac00 1>, + <&usb_dmac10 0>, <&usb_dmac10 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + }; + + usbphy0: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a77470", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + }; + + hsusb1: hsusb@e6598000 { + compatible = "renesas,usbhs-r8a77470", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6598000 0 0x100>; + interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 706>; + dmas = <&usb_dmac01 0>, <&usb_dmac01 1>, + <&usb_dmac11 0>, <&usb_dmac11 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <4>; + /* We need to turn on usbphy0 to make usbphy1 to work */ + phys = <&usb1 1>; + phy-names = "usb"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 706>; + status = "disabled"; + }; + + usbphy1: usb-phy@e6598100 { + compatible = "renesas,usb-phy-r8a77470", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6598100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 706>; + clock-names = "usbhs"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 706>; + status = "disabled"; + + usb1: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + }; + usb_dmac00: dma-controller@e65a0000 { compatible = "renesas,r8a77470-usb-dmac", "renesas,usb-dmac"; @@ -588,6 +659,216 @@ status = "disabled"; }; + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a77470", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 717>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a77470", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a77470", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 0x60>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 713>; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a77470", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a77470", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb0 0>, <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb0 0>, <&usb2_phy0>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a77470"; + reg = <0 0xee080200 0 0x700>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; + }; + + ohci1: usb@ee0c0000 { + compatible = "generic-ohci"; + reg = <0 0xee0c0000 0 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 705>; + phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>; + phy-names = "usb"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 705>; + status = "disabled"; + }; + + ehci1: usb@ee0c0100 { + compatible = "generic-ehci"; + reg = <0 0xee0c0100 0 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 705>; + phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 705>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@ee0c0200 { + compatible = "renesas,usb2-phy-r8a77470"; + reg = <0 0xee0c0200 0 0x700>; + clocks = <&cpg CPG_MOD 705>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 705>; + #phy-cells = <0>; + status = "disabled"; + }; + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a77470", "renesas,rcar-gen2-sdhi"; @@ -643,6 +924,38 @@ resets = <&cpg 408>; }; + du: display@feb00000 { + compatible = "renesas,du-r8a77470"; + reg = <0 0xfeb00000 0 0x40000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb0: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_rgb1: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + prr: chipid@ff000044 { compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index cecb22924ec4..0b49956069fc 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -25,7 +25,7 @@ }; chosen { - bootargs = "ignore_loglevel ip=dhcp root=/dev/nfs rw"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 05db0ccad7a6..10d996d2941f 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -367,6 +367,30 @@ status = "disabled"; }; + hscif0: serial@ffe48000 { + compatible = "renesas,hscif-r8a7778", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe48000 96>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_HSCIF0>, + <&cpg_clocks R8A7778_CLK_S>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + hscif1: serial@ffe49000 { + compatible = "renesas,hscif-r8a7778", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe49000 96>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_HSCIF1>, + <&cpg_clocks R8A7778_CLK_S>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + mmcif: mmc@ffe4e000 { compatible = "renesas,mmcif-r8a7778", "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; @@ -535,6 +559,8 @@ <&cpg_clocks R8A7778_CLK_P>, <&cpg_clocks R8A7778_CLK_P>, <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_S>, + <&cpg_clocks R8A7778_CLK_S>, <&cpg_clocks R8A7778_CLK_P>, <&cpg_clocks R8A7778_CLK_P>, <&cpg_clocks R8A7778_CLK_P>, @@ -551,6 +577,7 @@ R8A7778_CLK_SCIF0 R8A7778_CLK_SCIF1 R8A7778_CLK_SCIF2 R8A7778_CLK_SCIF3 R8A7778_CLK_SCIF4 R8A7778_CLK_SCIF5 + R8A7778_CLK_HSCIF0 R8A7778_CLK_HSCIF1 R8A7778_CLK_TMU0 R8A7778_CLK_TMU1 R8A7778_CLK_TMU2 R8A7778_CLK_SSI0 R8A7778_CLK_SSI1 R8A7778_CLK_SSI2 @@ -560,6 +587,7 @@ clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3", "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", + "hscif0", "hscif1", "tmu0", "tmu1", "tmu2", "ssi0", "ssi1", "ssi2", "ssi3", "sru", "hspi"; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index abc14e7a4c93..d4bee1ec9044 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "ignore_loglevel root=/dev/nfs ip=on"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 3bc133d9489c..3ff259207527 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -287,6 +287,32 @@ status = "disabled"; }; + hscif0: serial@ffe48000 { + compatible = "renesas,hscif-r8a7779", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe48000 96>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_HSCIF0>, + <&cpg_clocks R8A7779_CLK_S>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + hscif1: serial@ffe49000 { + compatible = "renesas,hscif-r8a7779", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe49000 96>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_HSCIF1>, + <&cpg_clocks R8A7779_CLK_S>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + pfc: pin-controller@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts index 629da4cee1b9..7a7d3b84d1a6 100644 --- a/arch/arm/boot/dts/r8a7790-stout.dts +++ b/arch/arm/boot/dts/r8a7790-stout.dts @@ -94,9 +94,8 @@ status = "okay"; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>, <&osc1_clk>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", "dclkin.0"; + clock-names = "du.0", "du.1", "du.2", "dclkin.0"; ports { port@0 { @@ -104,11 +103,21 @@ remote-endpoint = <&adv7511_in>; }; }; + }; +}; + +&lvds0 { + ports { port@1 { lvds_connector0: endpoint { }; }; - port@2 { + }; +}; + +&lvds1 { + ports { + port@1 { lvds_connector1: endpoint { }; }; diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index f92301290b02..b6fa80c3b07e 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -308,6 +308,26 @@ }; }; +&iic3 { + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; +}; + &du { pinctrl-0 = <&du0_pins &du1_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 8e9eb4b704d3..38fb43d11b27 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -22,6 +22,7 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &iic3; spi0 = &qspi; spi1 = &msiof0; spi2 = &msiof1; @@ -444,6 +445,23 @@ status = "disabled"; }; + iic3: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7792", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7792", "renesas,rcar-dmac"; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index ef7e2a837df6..0ab3d8d57f6d 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -199,6 +199,22 @@ }; }; +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&usbphy { + status = "okay"; +}; + &du { pinctrl-0 = <&du_pins>; pinctrl-names = "default"; @@ -293,6 +309,16 @@ function = "sdhi1"; power-source = <1800>; }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; }; &cmt0 { @@ -377,6 +403,27 @@ pinctrl-names = "i2c-exio4"; }; +&i2c7 { + status = "okay"; + clock-frequency = <100000>; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; +}; + &vin0 { status = "okay"; pinctrl-0 = <&vin0_pins>; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 0fd19f9723df..fb3cf005cc90 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -310,7 +310,6 @@ }; &i2s { - #sound-dai-cells = <0>; status = "okay"; }; @@ -369,31 +368,31 @@ &pinctrl { leds { led_ctl: led-ctl { - rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>; }; }; sdio { bt_wake_h: bt-wake-h { - rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_default>; }; }; sdmmc { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sleep { global_pwroff: global-pwroff { - rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index d560fc4051c5..0290ea4edd32 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -289,6 +289,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&i2s_bus>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -550,71 +551,71 @@ pwm0 { pwm0_pin: pwm0-pin { - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { - rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>; }; }; pwm2 { pwm2_pin: pwm2-pin { - rockchip,pins = <0 1 2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>; }; }; pwm3 { pwm3_pin: pwm3-pin { - rockchip,pins = <0 27 1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>; }; }; sdmmc { sdmmc_clk: sdmmc-clk { - rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>; }; sdmmc_cd: sdmmc-cd { - rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>; }; sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>; }; sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>, - <1 19 RK_FUNC_1 &pcfg_pull_default>, - <1 20 RK_FUNC_1 &pcfg_pull_default>, - <1 21 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>, + <1 RK_PC3 1 &pcfg_pull_default>, + <1 RK_PC4 1 &pcfg_pull_default>, + <1 RK_PC5 1 &pcfg_pull_default>; }; }; sdio { sdio_bus1: sdio-bus1 { - rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>; }; sdio_bus4: sdio-bus4 { - rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>, - <0 12 RK_FUNC_1 &pcfg_pull_default>, - <0 13 RK_FUNC_1 &pcfg_pull_default>, - <0 14 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>, + <0 RK_PB4 1 &pcfg_pull_default>, + <0 RK_PB5 1 &pcfg_pull_default>, + <0 RK_PB6 1 &pcfg_pull_default>; }; sdio_cmd: sdio-cmd { - rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PB0 1 &pcfg_pull_default>; }; sdio_clk: sdio-clk { - rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none>; }; }; @@ -624,135 +625,135 @@ * We also have external pulls, so disable the internal ones. */ emmc_clk: emmc-clk { - rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PA1 2 &pcfg_pull_default>; }; emmc_bus8: emmc-bus8 { - rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>, - <1 25 RK_FUNC_2 &pcfg_pull_default>, - <1 26 RK_FUNC_2 &pcfg_pull_default>, - <1 27 RK_FUNC_2 &pcfg_pull_default>, - <1 28 RK_FUNC_2 &pcfg_pull_default>, - <1 29 RK_FUNC_2 &pcfg_pull_default>, - <1 30 RK_FUNC_2 &pcfg_pull_default>, - <1 31 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>, + <1 RK_PD1 2 &pcfg_pull_default>, + <1 RK_PD2 2 &pcfg_pull_default>, + <1 RK_PD3 2 &pcfg_pull_default>, + <1 RK_PD4 2 &pcfg_pull_default>, + <1 RK_PD5 2 &pcfg_pull_default>, + <1 RK_PD6 2 &pcfg_pull_default>, + <1 RK_PD7 2 &pcfg_pull_default>; }; }; emac { emac_xfer: emac-xfer { - rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */ - <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */ - <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */ - <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */ - <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */ - <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */ - <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */ - <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */ + rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */ + <2 RK_PB5 1 &pcfg_pull_default>, /* tx_en */ + <2 RK_PB6 1 &pcfg_pull_default>, /* mac_clk */ + <2 RK_PB7 1 &pcfg_pull_default>, /* rx_err */ + <2 RK_PC0 1 &pcfg_pull_default>, /* rxd1 */ + <2 RK_PC1 1 &pcfg_pull_default>, /* rxd0 */ + <2 RK_PC2 1 &pcfg_pull_default>, /* txd1 */ + <2 RK_PC3 1 &pcfg_pull_default>; /* txd0 */ }; emac_mdio: emac-mdio { - rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */ - <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */ + rockchip,pins = <2 RK_PB4 1 &pcfg_pull_default>, /* mac_md */ + <2 RK_PD1 1 &pcfg_pull_default>; /* mac_mdclk */ }; }; i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, - <0 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>, + <0 RK_PA1 1 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, - <0 3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>, + <0 RK_PA3 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { - rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>, - <2 21 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>, + <2 RK_PC5 1 &pcfg_pull_none>; }; }; i2s { i2s_bus: i2s-bus { - rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>, - <1 1 RK_FUNC_1 &pcfg_pull_default>, - <1 2 RK_FUNC_1 &pcfg_pull_default>, - <1 3 RK_FUNC_1 &pcfg_pull_default>, - <1 4 RK_FUNC_1 &pcfg_pull_default>, - <1 5 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>, + <1 RK_PA1 1 &pcfg_pull_default>, + <1 RK_PA2 1 &pcfg_pull_default>, + <1 RK_PA3 1 &pcfg_pull_default>, + <1 RK_PA4 1 &pcfg_pull_default>, + <1 RK_PA5 1 &pcfg_pull_default>; }; }; hdmi { hdmi_ctl: hdmi-ctl { - rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>, - <1 9 RK_FUNC_1 &pcfg_pull_none>, - <1 10 RK_FUNC_1 &pcfg_pull_none>, - <1 11 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, + <1 RK_PB1 1 &pcfg_pull_none>, + <1 RK_PB2 1 &pcfg_pull_none>, + <1 RK_PB3 1 &pcfg_pull_none>; }; }; uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>, - <0 17 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>, + <0 RK_PC1 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { - rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PC2 1 &pcfg_pull_default>; }; uart0_rts: uart0-rts { - rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC3 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>, - <2 23 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC6 1 &pcfg_pull_default>, + <2 RK_PC7 1 &pcfg_pull_none>; }; /* no rts / cts for uart1 */ }; uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>, - <1 19 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>, + <1 RK_PC3 2 &pcfg_pull_none>; }; /* no rts / cts for uart2 */ }; spi-pins { spi_txd:spi-txd { - rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>; + rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>; }; spi_rxd:spi-rxd { - rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>; + rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>; }; spi_clk:spi-clk { - rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>; }; spi_cs0:spi-cs0 { - rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>; + rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>; }; spi_cs1:spi-cs1 { - rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>; + rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>; }; }; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 1c925f20dba0..0a56a2f1bc4d 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -171,7 +171,6 @@ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; bus-width = <4>; - disable-wp; }; &pwm3 { diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index ce525b956ae5..7e01f6406a86 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -168,7 +168,7 @@ &pinctrl { lan8720a { phy_int: phy-int { - rockchip,pins = <RK_GPIO1 26 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index b6a8a82d219e..365eff621113 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -30,6 +30,17 @@ }; }; + hdmi_con { + compatible = "hdmi-connector"; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + vcc_io: vcc-io { compatible = "regulator-fixed"; regulator-name = "vcc_io"; @@ -91,6 +102,20 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_in_vop1 { + status = "disabled"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { bus-width = <4>; cap-mmc-highspeed; @@ -101,7 +126,6 @@ &mmc1 { bus-width = <4>; - disable-wp; non-removable; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; pinctrl-names = "default"; @@ -112,25 +136,25 @@ &pinctrl { usb-host { host_drv: host-drv { - rockchip,pins = <RK_GPIO0 6 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>; }; }; usb-otg { otg_drv: otg-drv { - rockchip,pins = <RK_GPIO0 5 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>; }; }; sdmmc { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <RK_GPIO3 7 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>; }; }; sdio { wifi_pwr: wifi-pwr { - rockchip,pins = <RK_GPIO3 24 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; @@ -151,6 +175,10 @@ status = "okay"; }; +&vop0 { + status = "okay"; +}; + &wdt { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index cd126b927ba8..f9db6bb9fa11 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -147,7 +147,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; @@ -309,7 +308,6 @@ &mmc1 { bus-width = <4>; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; @@ -324,71 +322,71 @@ ak8963 { comp_int: comp-int { - rockchip,pins = <4 17 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_default>; }; }; emac { rmii_rst: rmii-rst { - rockchip,pins = <1 30 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_output_high>; }; }; ir { ir_int: ir-int { - rockchip,pins = <6 1 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <6 RK_PA1 RK_FUNC_GPIO &pcfg_pull_default>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <6 2 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <6 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>; }; }; mma8452 { gsensor_int: gsensor-int { - rockchip,pins = <4 16 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_default>; }; }; mmc { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <3 7 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>; }; }; usb_host { host_drv: host-drv { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>; }; hub_rst: hub-rst { - rockchip,pins = <1 31 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_output_high>; }; sata_pwr: sata-pwr { - rockchip,pins = <4 22 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_default>; }; sata_reset: sata-reset { - rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>; }; }; usb_otg { otg_drv: otg-drv { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>; }; }; tps { pmic_int: pmic-int { - rockchip,pins = <6 4 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <6 RK_PA4 RK_FUNC_GPIO &pcfg_pull_default>; }; pwr_hold: pwr-hold { - rockchip,pins = <6 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <6 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; }; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 30dc8af0bdcb..3d1b02f45ffd 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -44,6 +44,11 @@ }; }; + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop0_out>, <&vop1_out>; + }; + sram: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x10000>; @@ -57,6 +62,96 @@ }; }; + vop0: vop@1010c000 { + compatible = "rockchip,rk3066-vop"; + reg = <0x1010c000 0x19c>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC0>, + <&cru DCLK_LCDC0>, + <&cru HCLK_LCDC0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3066_PD_VIO>; + resets = <&cru SRST_LCDC0_AXI>, + <&cru SRST_LCDC0_AHB>, + <&cru SRST_LCDC0_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop0_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vop0_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop0>; + }; + }; + }; + + vop1: vop@1010e000 { + compatible = "rockchip,rk3066-vop"; + reg = <0x1010e000 0x19c>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC1>, + <&cru DCLK_LCDC1>, + <&cru HCLK_LCDC1>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3066_PD_VIO>; + resets = <&cru SRST_LCDC1_AXI>, + <&cru SRST_LCDC1_AHB>, + <&cru SRST_LCDC1_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop1_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vop1_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop1>; + }; + }; + }; + + hdmi: hdmi@10116000 { + compatible = "rockchip,rk3066-hdmi"; + reg = <0x10116000 0x2000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HDMI>; + clock-names = "hclk"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>; + power-domains = <&power RK3066_PD_VIO>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in_vop0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop0_out_hdmi>; + }; + + hdmi_in_vop1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vop1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + i2s0: i2s@10118000 { compatible = "rockchip,rk3066-i2s"; reg = <0x10118000 0x2000>; @@ -296,33 +391,33 @@ emac { emac_xfer: emac-xfer { - rockchip,pins = <RK_GPIO1 16 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */ - <RK_GPIO1 17 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */ - <RK_GPIO1 18 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */ - <RK_GPIO1 19 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */ - <RK_GPIO1 20 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */ - <RK_GPIO1 21 RK_FUNC_2 &pcfg_pull_none>, /* crs_dvalid */ - <RK_GPIO1 22 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */ - <RK_GPIO1 23 RK_FUNC_2 &pcfg_pull_none>; /* rxd0 */ + rockchip,pins = <1 RK_PC0 2 &pcfg_pull_none>, /* mac_clk */ + <1 RK_PC1 2 &pcfg_pull_none>, /* tx_en */ + <1 RK_PC2 2 &pcfg_pull_none>, /* txd1 */ + <1 RK_PC3 2 &pcfg_pull_none>, /* txd0 */ + <1 RK_PC4 2 &pcfg_pull_none>, /* rx_err */ + <1 RK_PC5 2 &pcfg_pull_none>, /* crs_dvalid */ + <1 RK_PC6 2 &pcfg_pull_none>, /* rxd1 */ + <1 RK_PC7 2 &pcfg_pull_none>; /* rxd0 */ }; emac_mdio: emac-mdio { - rockchip,pins = <RK_GPIO1 24 RK_FUNC_2 &pcfg_pull_none>, /* mac_md */ - <RK_GPIO1 25 RK_FUNC_2 &pcfg_pull_none>; /* mac_mdclk */ + rockchip,pins = <1 RK_PD0 2 &pcfg_pull_none>, /* mac_md */ + <1 RK_PD1 2 &pcfg_pull_none>; /* mac_mdclk */ }; }; emmc { emmc_clk: emmc-clk { - rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <3 RK_PD7 2 &pcfg_pull_default>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <4 RK_PB1 2 &pcfg_pull_default>; }; emmc_rst: emmc-rst { - rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <4 RK_PB2 2 &pcfg_pull_default>; }; /* @@ -333,245 +428,256 @@ */ }; + hdmi { + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>; + }; + + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>, + <0 RK_PA2 1 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD4 1 &pcfg_pull_none>, + <2 RK_PD5 1 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD6 1 &pcfg_pull_none>, + <2 RK_PD7 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { - rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA0 1 &pcfg_pull_none>, + <3 RK_PA1 1 &pcfg_pull_none>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { - rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>, - <RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA2 2 &pcfg_pull_none>, + <3 RK_PA3 2 &pcfg_pull_none>; }; }; i2c4 { i2c4_xfer: i2c4-xfer { - rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>, + <3 RK_PA5 1 &pcfg_pull_none>; }; }; pwm0 { pwm0_out: pwm0-out { - rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>; }; }; pwm1 { pwm1_out: pwm1-out { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>; }; }; pwm2 { pwm2_out: pwm2-out { - rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>; }; }; pwm3 { pwm3_out: pwm3-out { - rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>; }; }; spi0 { spi0_clk: spi0-clk { - rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA5 2 &pcfg_pull_default>; }; spi0_cs0: spi0-cs0 { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA4 2 &pcfg_pull_default>; }; spi0_tx: spi0-tx { - rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA7 2 &pcfg_pull_default>; }; spi0_rx: spi0-rx { - rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA6 2 &pcfg_pull_default>; }; spi0_cs1: spi0-cs1 { - rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <4 RK_PB7 1 &pcfg_pull_default>; }; }; spi1 { spi1_clk: spi1-clk { - rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PC3 2 &pcfg_pull_default>; }; spi1_cs0: spi1-cs0 { - rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PC4 2 &pcfg_pull_default>; }; spi1_rx: spi1-rx { - rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PC6 2 &pcfg_pull_default>; }; spi1_tx: spi1-tx { - rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PC5 2 &pcfg_pull_default>; }; spi1_cs1: spi1-cs1 { - rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PC7 2 &pcfg_pull_default>; }; }; uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>, + <1 RK_PA1 1 &pcfg_pull_default>; }; uart0_cts: uart0-cts { - rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA2 1 &pcfg_pull_default>; }; uart0_rts: uart0-rts { - rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA3 1 &pcfg_pull_default>; }; }; uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA4 1 &pcfg_pull_default>, + <1 RK_PA5 1 &pcfg_pull_default>; }; uart1_cts: uart1-cts { - rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA6 1 &pcfg_pull_default>; }; uart1_rts: uart1-rts { - rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>; }; }; uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>, + <1 RK_PB1 1 &pcfg_pull_default>; }; /* no rts / cts for uart2 */ }; uart3 { uart3_xfer: uart3-xfer { - rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PD3 1 &pcfg_pull_default>, + <3 RK_PD4 1 &pcfg_pull_default>; }; uart3_cts: uart3-cts { - rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PD5 1 &pcfg_pull_default>; }; uart3_rts: uart3-rts { - rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PD6 1 &pcfg_pull_default>; }; }; sd0 { sd0_clk: sd0-clk { - rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PB0 1 &pcfg_pull_default>; }; sd0_cmd: sd0-cmd { - rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PB1 1 &pcfg_pull_default>; }; sd0_cd: sd0-cd { - rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PB6 1 &pcfg_pull_default>; }; sd0_wp: sd0-wp { - rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PB7 1 &pcfg_pull_default>; }; sd0_bus1: sd0-bus-width1 { - rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PB2 1 &pcfg_pull_default>; }; sd0_bus4: sd0-bus-width4 { - rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PB2 1 &pcfg_pull_default>, + <3 RK_PB3 1 &pcfg_pull_default>, + <3 RK_PB4 1 &pcfg_pull_default>, + <3 RK_PB5 1 &pcfg_pull_default>; }; }; sd1 { sd1_clk: sd1-clk { - rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PC5 1 &pcfg_pull_default>; }; sd1_cmd: sd1-cmd { - rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PC0 1 &pcfg_pull_default>; }; sd1_cd: sd1-cd { - rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PC6 1 &pcfg_pull_default>; }; sd1_wp: sd1-wp { - rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PC7 1 &pcfg_pull_default>; }; sd1_bus1: sd1-bus-width1 { - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PC1 1 &pcfg_pull_default>; }; sd1_bus4: sd1-bus-width4 { - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PC1 1 &pcfg_pull_default>, + <3 RK_PC2 1 &pcfg_pull_default>, + <3 RK_PC3 1 &pcfg_pull_default>, + <3 RK_PC4 1 &pcfg_pull_default>; }; }; i2s0 { i2s0_bus: i2s0-bus { - rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PA7 1 &pcfg_pull_default>, + <0 RK_PB0 1 &pcfg_pull_default>, + <0 RK_PB1 1 &pcfg_pull_default>, + <0 RK_PB2 1 &pcfg_pull_default>, + <0 RK_PB3 1 &pcfg_pull_default>, + <0 RK_PB4 1 &pcfg_pull_default>, + <0 RK_PB5 1 &pcfg_pull_default>, + <0 RK_PB6 1 &pcfg_pull_default>, + <0 RK_PB7 1 &pcfg_pull_default>; }; }; i2s1 { i2s1_bus: i2s1-bus { - rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>, + <0 RK_PC1 1 &pcfg_pull_default>, + <0 RK_PC2 1 &pcfg_pull_default>, + <0 RK_PC3 1 &pcfg_pull_default>, + <0 RK_PC4 1 &pcfg_pull_default>, + <0 RK_PC5 1 &pcfg_pull_default>; }; }; i2s2 { i2s2_bus: i2s2-bus { - rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PD0 1 &pcfg_pull_default>, + <0 RK_PD1 1 &pcfg_pull_default>, + <0 RK_PD2 1 &pcfg_pull_default>, + <0 RK_PD3 1 &pcfg_pull_default>, + <0 RK_PD4 1 &pcfg_pull_default>, + <0 RK_PD5 1 &pcfg_pull_default>; }; }; }; @@ -669,6 +775,7 @@ <&cru SCLK_CIF0>, <&cru ACLK_CIF0>, <&cru HCLK_CIF0>, + <&cru HCLK_HDMI>, <&cru ACLK_IPP>, <&cru HCLK_IPP>, <&cru ACLK_RGA>, diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts index a7477a09fbe8..c8b62bbd6a4a 100644 --- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts +++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts @@ -227,7 +227,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd>; @@ -408,6 +407,21 @@ &i2c2 { clock-frequency = <400000>; status = "okay"; + + ft5606: touchscreen@3e { + compatible = "edt,edt-ft5506"; + reg = <0x3e>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int &tp_rst>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; + touchscreen-inverted-y; + /* hw ts resolution does not match display */ + touchscreen-size-y = <1024>; + touchscreen-size-x = <768>; + touchscreen-swapped-x-y; + }; }; &i2c3 { @@ -446,7 +460,6 @@ &mmc1 { bus-width = <4>; cap-sd-highspeed; - cap-mmc-highspeed; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; @@ -526,7 +539,7 @@ }; cif1_pdn: cif1-pdn { - rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; cif_avdd_en: cif-avdd-en { diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index 9ae65c767c90..c32e1d441cf7 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -62,7 +62,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; @@ -248,10 +247,10 @@ usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 94bc81c24049..c9a7f5409960 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -307,40 +307,40 @@ act8846 { act8846_dvs0_ctl: act8846-dvs0-ctl { - rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>; }; }; hym8563 { rtc_int: rtc-int { - rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; lan8720a { phy_int: phy-int { - rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; ir-receiver { ir_recv_pin: ir-recv-pin { - rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sd0 { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 3ed49898f4b2..10ede65d90f3 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -315,15 +315,15 @@ emmc { emmc_clk: emmc-clk { - rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD0 2 &pcfg_pull_none>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PD2 2 &pcfg_pull_up>; }; emmc_rst: emmc-rst { - rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD3 2 &pcfg_pull_none>; }; /* @@ -336,291 +336,291 @@ emac { emac_xfer: emac-xfer { - rockchip,pins = <RK_GPIO3 16 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */ - <RK_GPIO3 17 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */ - <RK_GPIO3 18 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */ - <RK_GPIO3 19 RK_FUNC_2 &pcfg_pull_none>, /* rxd0 */ - <RK_GPIO3 20 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */ - <RK_GPIO3 21 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */ - <RK_GPIO3 22 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */ - <RK_GPIO3 23 RK_FUNC_2 &pcfg_pull_none>; /* crs_dvalid */ + rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none>, /* tx_en */ + <3 RK_PC1 2 &pcfg_pull_none>, /* txd1 */ + <3 RK_PC2 2 &pcfg_pull_none>, /* txd0 */ + <3 RK_PC3 2 &pcfg_pull_none>, /* rxd0 */ + <3 RK_PC4 2 &pcfg_pull_none>, /* rxd1 */ + <3 RK_PC5 2 &pcfg_pull_none>, /* mac_clk */ + <3 RK_PC6 2 &pcfg_pull_none>, /* rx_err */ + <3 RK_PC7 2 &pcfg_pull_none>; /* crs_dvalid */ }; emac_mdio: emac-mdio { - rockchip,pins = <RK_GPIO3 24 RK_FUNC_2 &pcfg_pull_none>, - <RK_GPIO3 25 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD0 2 &pcfg_pull_none>, + <3 RK_PD1 2 &pcfg_pull_none>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 25 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>, + <1 RK_PD1 1 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <RK_GPIO1 26 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 27 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD2 1 &pcfg_pull_none>, + <1 RK_PD3 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { - rockchip,pins = <RK_GPIO1 28 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 29 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>, + <1 RK_PD5 1 &pcfg_pull_none>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { - rockchip,pins = <RK_GPIO3 14 RK_FUNC_2 &pcfg_pull_none>, - <RK_GPIO3 15 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PB6 2 &pcfg_pull_none>, + <3 RK_PB7 2 &pcfg_pull_none>; }; }; i2c4 { i2c4_xfer: i2c4-xfer { - rockchip,pins = <RK_GPIO1 30 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 31 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD6 1 &pcfg_pull_none>, + <1 RK_PD7 1 &pcfg_pull_none>; }; }; lcdc1 { lcdc1_dclk: lcdc1-dclk { - rockchip,pins = <2 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD0 1 &pcfg_pull_none>; }; lcdc1_den: lcdc1-den { - rockchip,pins = <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none>; }; lcdc1_hsync: lcdc1-hsync { - rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>; }; lcdc1_vsync: lcdc1-vsync { - rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>; }; lcdc1_rgb24: ldcd1-rgb24 { - rockchip,pins = <2 RK_PA0 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA1 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA2 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA3 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA4 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA5 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA7 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB1 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB2 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB5 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC6 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>, + <2 RK_PA1 1 &pcfg_pull_none>, + <2 RK_PA2 1 &pcfg_pull_none>, + <2 RK_PA3 1 &pcfg_pull_none>, + <2 RK_PA4 1 &pcfg_pull_none>, + <2 RK_PA5 1 &pcfg_pull_none>, + <2 RK_PA6 1 &pcfg_pull_none>, + <2 RK_PA7 1 &pcfg_pull_none>, + <2 RK_PB0 1 &pcfg_pull_none>, + <2 RK_PB1 1 &pcfg_pull_none>, + <2 RK_PB2 1 &pcfg_pull_none>, + <2 RK_PB3 1 &pcfg_pull_none>, + <2 RK_PB4 1 &pcfg_pull_none>, + <2 RK_PB5 1 &pcfg_pull_none>, + <2 RK_PB6 1 &pcfg_pull_none>, + <2 RK_PB7 1 &pcfg_pull_none>, + <2 RK_PC0 1 &pcfg_pull_none>, + <2 RK_PC1 1 &pcfg_pull_none>, + <2 RK_PC2 1 &pcfg_pull_none>, + <2 RK_PC3 1 &pcfg_pull_none>, + <2 RK_PC4 1 &pcfg_pull_none>, + <2 RK_PC5 1 &pcfg_pull_none>, + <2 RK_PC6 1 &pcfg_pull_none>, + <2 RK_PC7 1 &pcfg_pull_none>; }; }; pwm0 { pwm0_out: pwm0-out { - rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>; }; }; pwm1 { pwm1_out: pwm1-out { - rockchip,pins = <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD4 1 &pcfg_pull_none>; }; }; pwm2 { pwm2_out: pwm2-out { - rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD5 1 &pcfg_pull_none>; }; }; pwm3 { pwm3_out: pwm3-out { - rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD6 1 &pcfg_pull_none>; }; }; spi0 { spi0_clk: spi0-clk { - rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PA6 2 &pcfg_pull_up>; }; spi0_cs0: spi0-cs0 { - rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PA7 2 &pcfg_pull_up>; }; spi0_tx: spi0-tx { - rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PA5 2 &pcfg_pull_up>; }; spi0_rx: spi0-rx { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PA4 2 &pcfg_pull_up>; }; spi0_cs1: spi0-cs1 { - rockchip,pins = <RK_GPIO1 15 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <1 RK_PB7 1 &pcfg_pull_up>; }; }; spi1 { spi1_clk: spi1-clk { - rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PD6 1 &pcfg_pull_up>; }; spi1_cs0: spi1-cs0 { - rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PD7 1 &pcfg_pull_up>; }; spi1_rx: spi1-rx { - rockchip,pins = <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PD4 1 &pcfg_pull_up>; }; spi1_tx: spi1-tx { - rockchip,pins = <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PD5 1 &pcfg_pull_up>; }; spi1_cs1: spi1-cs1 { - rockchip,pins = <RK_GPIO1 14 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PB6 2 &pcfg_pull_up>; }; }; uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up>, + <1 RK_PA1 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { - rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA2 1 &pcfg_pull_none>; }; uart0_rts: uart0-rts { - rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA3 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up>, + <1 RK_PA5 1 &pcfg_pull_none>; }; uart1_cts: uart1-cts { - rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>; }; uart1_rts: uart1-rts { - rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA7 1 &pcfg_pull_none>; }; }; uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_up>, + <1 RK_PB1 1 &pcfg_pull_none>; }; /* no rts / cts for uart2 */ }; uart3 { uart3_xfer: uart3-xfer { - rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB2 1 &pcfg_pull_up>, + <1 RK_PB3 1 &pcfg_pull_none>; }; uart3_cts: uart3-cts { - rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB4 1 &pcfg_pull_none>; }; uart3_rts: uart3-rts { - rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB5 1 &pcfg_pull_none>; }; }; sd0 { sd0_clk: sd0-clk { - rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA2 1 &pcfg_pull_none>; }; sd0_cmd: sd0-cmd { - rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>; }; sd0_cd: sd0-cd { - rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PB0 1 &pcfg_pull_none>; }; sd0_wp: sd0-wp { - rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PB1 1 &pcfg_pull_none>; }; sd0_pwr: sd0-pwr { - rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none>; }; sd0_bus1: sd0-bus-width1 { - rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>; }; sd0_bus4: sd0-bus-width4 { - rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>, + <3 RK_PA5 1 &pcfg_pull_none>, + <3 RK_PA6 1 &pcfg_pull_none>, + <3 RK_PA7 1 &pcfg_pull_none>; }; }; sd1 { sd1_clk: sd1-clk { - rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC5 1 &pcfg_pull_none>; }; sd1_cmd: sd1-cmd { - rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC0 1 &pcfg_pull_none>; }; sd1_cd: sd1-cd { - rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>; }; sd1_wp: sd1-wp { - rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC7 1 &pcfg_pull_none>; }; sd1_bus1: sd1-bus-width1 { - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC1 1 &pcfg_pull_none>; }; sd1_bus4: sd1-bus-width4 { - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC1 1 &pcfg_pull_none>, + <3 RK_PC2 1 &pcfg_pull_none>, + <3 RK_PC3 1 &pcfg_pull_none>, + <3 RK_PC4 1 &pcfg_pull_none>; }; }; i2s0 { i2s0_bus: i2s0-bus { - rockchip,pins = <RK_GPIO1 16 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 17 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 18 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 19 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 20 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>, + <1 RK_PC1 1 &pcfg_pull_none>, + <1 RK_PC2 1 &pcfg_pull_none>, + <1 RK_PC3 1 &pcfg_pull_none>, + <1 RK_PC4 1 &pcfg_pull_none>, + <1 RK_PC5 1 &pcfg_pull_none>; }; }; spdif { spdif_tx: spdif-tx { - rockchip,pins = <RK_GPIO1 14 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB6 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index 4df7accc3ad7..350497a3ca86 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -137,7 +137,6 @@ &emmc { cap-mmc-highspeed; - disable-wp; non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 29f19076dceb..da102fff96a2 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -865,228 +865,228 @@ emmc { emmc_clk: emmc-clk { - rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA7 2 &pcfg_pull_none>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC6 2 &pcfg_pull_none>; }; emmc_bus8: emmc-bus8 { - rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>, - <1 25 RK_FUNC_2 &pcfg_pull_none>, - <1 26 RK_FUNC_2 &pcfg_pull_none>, - <1 27 RK_FUNC_2 &pcfg_pull_none>, - <1 28 RK_FUNC_2 &pcfg_pull_none>, - <1 29 RK_FUNC_2 &pcfg_pull_none>, - <1 30 RK_FUNC_2 &pcfg_pull_none>, - <1 31 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD0 2 &pcfg_pull_none>, + <1 RK_PD1 2 &pcfg_pull_none>, + <1 RK_PD2 2 &pcfg_pull_none>, + <1 RK_PD3 2 &pcfg_pull_none>, + <1 RK_PD4 2 &pcfg_pull_none>, + <1 RK_PD5 2 &pcfg_pull_none>, + <1 RK_PD6 2 &pcfg_pull_none>, + <1 RK_PD7 2 &pcfg_pull_none>; }; }; gmac { rgmii_pins: rgmii-pins { - rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>, - <2 12 RK_FUNC_1 &pcfg_pull_none>, - <2 25 RK_FUNC_1 &pcfg_pull_none>, - <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 22 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 23 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 9 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 17 RK_FUNC_1 &pcfg_pull_none>, - <2 16 RK_FUNC_1 &pcfg_pull_none>, - <2 21 RK_FUNC_2 &pcfg_pull_none>, - <2 20 RK_FUNC_2 &pcfg_pull_none>, - <2 11 RK_FUNC_1 &pcfg_pull_none>, - <2 8 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none>, + <2 RK_PB4 1 &pcfg_pull_none>, + <2 RK_PD1 1 &pcfg_pull_none>, + <2 RK_PC3 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PC2 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PC6 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PC7 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PB1 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PB5 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PC1 1 &pcfg_pull_none>, + <2 RK_PC0 1 &pcfg_pull_none>, + <2 RK_PC5 2 &pcfg_pull_none>, + <2 RK_PC4 2 &pcfg_pull_none>, + <2 RK_PB3 1 &pcfg_pull_none>, + <2 RK_PB0 1 &pcfg_pull_none>; }; rmii_pins: rmii-pins { - rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>, - <2 12 RK_FUNC_1 &pcfg_pull_none>, - <2 25 RK_FUNC_1 &pcfg_pull_none>, - <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 17 RK_FUNC_1 &pcfg_pull_none>, - <2 16 RK_FUNC_1 &pcfg_pull_none>, - <2 8 RK_FUNC_1 &pcfg_pull_none>, - <2 15 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none>, + <2 RK_PB4 1 &pcfg_pull_none>, + <2 RK_PD1 1 &pcfg_pull_none>, + <2 RK_PC3 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PC2 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PB5 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PC1 1 &pcfg_pull_none>, + <2 RK_PC0 1 &pcfg_pull_none>, + <2 RK_PB0 1 &pcfg_pull_none>, + <2 RK_PB7 1 &pcfg_pull_none>; }; phy_pins: phy-pins { - rockchip,pins = <2 14 RK_FUNC_2 &pcfg_pull_none>, - <2 8 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <2 RK_PB6 2 &pcfg_pull_none>, + <2 RK_PB0 2 &pcfg_pull_none>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, - <0 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>, + <0 RK_PA1 1 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, - <0 3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>, + <0 RK_PA3 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { - rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>, - <2 21 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>, + <2 RK_PC5 1 &pcfg_pull_none>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { - rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>, - <0 7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>, + <0 RK_PA7 1 &pcfg_pull_none>; }; }; spi-0 { spi0_clk: spi0-clk { - rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>; }; spi0_cs0: spi0-cs0 { - rockchip,pins = <0 14 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB6 2 &pcfg_pull_up>; }; spi0_tx: spi0-tx { - rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB3 2 &pcfg_pull_up>; }; spi0_rx: spi0-rx { - rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB5 2 &pcfg_pull_up>; }; spi0_cs1: spi0-cs1 { - rockchip,pins = <1 12 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <1 RK_PB4 1 &pcfg_pull_up>; }; }; spi-1 { spi1_clk: spi1-clk { - rockchip,pins = <0 23 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>; }; spi1_cs0: spi1-cs0 { - rockchip,pins = <2 2 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <2 RK_PA2 2 &pcfg_pull_up>; }; spi1_rx: spi1-rx { - rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <2 RK_PA0 2 &pcfg_pull_up>; }; spi1_tx: spi1-tx { - rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <2 RK_PA1 2 &pcfg_pull_up>; }; spi1_cs1: spi1-cs1 { - rockchip,pins = <2 3 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <2 RK_PA3 2 &pcfg_pull_up>; }; }; i2s1 { i2s1_bus: i2s1-bus { - rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>, - <0 9 RK_FUNC_1 &pcfg_pull_none>, - <0 11 RK_FUNC_1 &pcfg_pull_none>, - <0 12 RK_FUNC_1 &pcfg_pull_none>, - <0 13 RK_FUNC_1 &pcfg_pull_none>, - <0 14 RK_FUNC_1 &pcfg_pull_none>, - <1 2 RK_FUNC_2 &pcfg_pull_none>, - <1 4 RK_FUNC_2 &pcfg_pull_none>, - <1 5 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 1 &pcfg_pull_none>, + <0 RK_PB1 1 &pcfg_pull_none>, + <0 RK_PB3 1 &pcfg_pull_none>, + <0 RK_PB4 1 &pcfg_pull_none>, + <0 RK_PB5 1 &pcfg_pull_none>, + <0 RK_PB6 1 &pcfg_pull_none>, + <1 RK_PA2 2 &pcfg_pull_none>, + <1 RK_PA4 2 &pcfg_pull_none>, + <1 RK_PA5 2 &pcfg_pull_none>; }; }; pwm0 { pwm0_pin: pwm0-pin { - rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC5 1 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { - rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>; }; }; pwm2 { pwm2_pin: pwm2-pin { - rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB4 2 &pcfg_pull_none>; }; }; pwm3 { pwm3_pin: pwm3-pin { - rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>; }; }; spdif { spdif_tx: spdif-tx { - rockchip,pins = <3 31 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD7 2 &pcfg_pull_none>; }; }; tsadc { otp_gpio: otp-gpio { - rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; otp_out: otp-out { - rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD0 2 &pcfg_pull_none>; }; }; uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>, - <2 27 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>, + <2 RK_PD3 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { - rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD5 1 &pcfg_pull_none>; }; uart0_rts: uart0-rts { - rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC1 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>, - <1 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>, + <1 RK_PB2 1 &pcfg_pull_none>; }; uart1_cts: uart1-cts { - rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>; }; uart1_rts: uart1-rts { - rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB3 1 &pcfg_pull_none>; }; }; uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, - <1 19 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>, + <1 RK_PC3 2 &pcfg_pull_none>; }; uart21_xfer: uart21-xfer { - rockchip,pins = <1 10 RK_FUNC_2 &pcfg_pull_up>, - <1 9 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB2 2 &pcfg_pull_up>, + <1 RK_PB1 2 &pcfg_pull_none>; }; uart2_cts: uart2-cts { - rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD1 1 &pcfg_pull_none>; }; uart2_rts: uart2-rts { - rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD0 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 6592c809e2a5..80080767c365 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -175,13 +175,13 @@ &pinctrl { lcd { lcd_en: lcd-en { - rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wifi { wifi_pwr: wifi-pwr { - rockchip,pins = <7 9 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 97e4d552ff0f..820440715302 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -314,25 +314,25 @@ backlight { bl_en: bl-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buttons { pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; lcd { lcd_cs: lcd-cs { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; @@ -342,34 +342,34 @@ * high-speed mode on EVB board so bump up to 8ma. */ sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; eth_phy { eth_phy_pwr: eth-phy-pwr { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts index b1b56dfdfdba..4847cf902a15 100644 --- a/arch/arm/boot/dts/rk3288-fennec.dts +++ b/arch/arm/boot/dts/rk3288-fennec.dts @@ -37,7 +37,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; @@ -279,27 +278,27 @@ gmac { phy_int: phy-int { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_pmeb: phy-pmeb { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usbphy { host_drv: host-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts index 0f3c29d7fbab..135e8832141f 100644 --- a/arch/arm/boot/dts/rk3288-firefly-beta.dts +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts @@ -18,13 +18,13 @@ &pinctrl { act8846 { pmic_vsel: pmic-vsel { - rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>; }; }; ir { ir_int: ir-int { - rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index f57f286a93c3..61435d8ee37b 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -224,25 +224,25 @@ act8846 { pwr_hold: pwr-hold { - rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>; }; pmic_vsel: pmic-vsel { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_output_low>; }; }; gmac { phy_int: phy-int { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_pmeb: phy-pmeb { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 58ea8bed040a..1574383fd2dc 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -254,7 +254,6 @@ bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; - disable-wp; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; @@ -307,39 +306,39 @@ &pinctrl { ir { ir_int: ir-int { - rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; dvp { dvp_pwr: dvp-pwr { - rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; cif_pwr: cif-pwr { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; hym8563 { rtc_int: rtc-int { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { power_led: power-led { - rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; work_led: work-led { - rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -349,44 +348,44 @@ * high-speed mode on firefly board so bump up to 12ma. */ sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio { wifi_enable: wifi-enable { - rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb_host { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; usbhub_rst: usbhub-rst { - rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>; }; }; usb_otg { otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts index 556ab42dd81c..313459dab2e4 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dts +++ b/arch/arm/boot/dts/rk3288-firefly.dts @@ -18,13 +18,13 @@ &pinctrl { act8846 { pmic_vsel: pmic-vsel { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_output_low>; }; }; ir { ir_int: ir-int { - rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index a6ff7eac4aa8..5e0a19004e46 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -392,49 +392,49 @@ act8846 { pwr_hold: pwr-hold { - rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>; }; }; dvp { dvp_pwr: dvp-pwr { - rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; gmac { phy_int: phy-int { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_pmeb: phy-pmeb { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; hym8563 { rtc_int: rtc-int { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { power_led: power-led { - rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; work_led: work-led { - rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -444,38 +444,38 @@ * high-speed mode on firefly board so bump up to 12ma. */ sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb_host { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; usbhub_rst: usbhub-rst { - rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>; }; }; usb_otg { otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 504ab1177aa7..c41d012c8850 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -87,7 +87,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; @@ -297,29 +296,29 @@ act8846 { pmic_int: pmic-int { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; pmic_sleep: pmic-sleep { - rockchip,pins = <0 0 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_output_low>; }; pmic_vsel: pmic-vsel { - rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>; }; }; gmac { phy_int: phy-int { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_pmeb: phy-pmeb { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; @@ -329,28 +328,28 @@ * high-speed mode on firefly board so bump up to 12ma. */ sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb_host { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts index 7077c3403483..1e33859de484 100644 --- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts +++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts @@ -160,15 +160,15 @@ buttons { user_button_pins: user-button-pins { /* button 1 */ - rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_pull_up>, + rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, /* button 2 */ - <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; rv4162 { i2c_rtc_int: i2c-rtc-int { - rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <5 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; @@ -178,44 +178,44 @@ * high-speed mode on pcm-947 board so bump up to 12 mA. */ sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; touchscreen { ts_irq_pin: ts-irq-pin { - rockchip,pins = <5 15 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <5 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb_host { host0_vbus_drv: host0-vbus-drv { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; host1_vbus_drv: host1-vbus-drv { - rockchip,pins = <2 0 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb_otg { otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi index c218dd54c9b5..77a47b9b756d 100644 --- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi +++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi @@ -342,49 +342,49 @@ * We also have external pulls, so disable the internal ones. */ emmc_clk: emmc-clk { - rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_12ma>; + rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none_12ma>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_12ma>; + rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none_12ma>; }; emmc_bus8: emmc-bus8 { - rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 1 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 2 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 3 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 4 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 5 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 6 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 7 RK_FUNC_2 &pcfg_pull_none_12ma>; + rockchip,pins = <3 RK_PA0 2 &pcfg_pull_none_12ma>, + <3 RK_PA1 2 &pcfg_pull_none_12ma>, + <3 RK_PA2 2 &pcfg_pull_none_12ma>, + <3 RK_PA3 2 &pcfg_pull_none_12ma>, + <3 RK_PA4 2 &pcfg_pull_none_12ma>, + <3 RK_PA5 2 &pcfg_pull_none_12ma>, + <3 RK_PA6 2 &pcfg_pull_none_12ma>, + <3 RK_PA7 2 &pcfg_pull_none_12ma>; }; }; gmac { phy_int: phy-int { - rockchip,pins = <4 2 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; leds { user_led: user-led { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; /* Pin for switching state between sleep and non-sleep state */ pmic_sleep: pmic-sleep { - rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 596435e03132..6a51940398b5 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -109,7 +109,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 28972fb4e221..a6ffc381abaa 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -265,39 +265,39 @@ act8846 { pmic_vsel: pmic-vsel { - rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>; }; pwr_hold: pwr-hold { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_output_high>; }; }; buttons { pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; ir { ir_int: ir-int { - rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 32e1ab336662..9f9e2bfd1295 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -231,13 +231,13 @@ emmc { emmc_reset: emmc-reset { - rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; gmac { phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 6a30cadad88a..cdcdc921ee09 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -133,7 +133,6 @@ bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; - disable-wp; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; @@ -205,53 +204,53 @@ &pinctrl { ir { ir_int: ir-int { - rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; headphone { hp_det: hp-det { - rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; }; phone_ctl: phone-ctl { - rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sata { sata_pwr_en: sata-pwr-en { - rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdmmc { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio { wifi_enable: wifi-enable { - rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rk3288-tinker-s.dts index 37093922b482..970e13859198 100644 --- a/arch/arm/boot/dts/rk3288-tinker-s.dts +++ b/arch/arm/boot/dts/rk3288-tinker-s.dts @@ -15,7 +15,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; @@ -24,3 +23,8 @@ mmc-ddr-1_8v; status = "okay"; }; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec_c0>; +}; diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index aa107ee41b8b..293576869546 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -5,6 +5,7 @@ #include "rk3288.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/clock/rockchip,rk808.h> / { chosen { @@ -61,6 +62,16 @@ }; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 RK808_CLKOUT1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + reset-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_LOW>, + <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -254,6 +265,7 @@ }; vccio_sd: LDO_REG5 { + regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_sd"; @@ -337,6 +349,7 @@ status = "okay"; sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; }; &pinctrl { @@ -351,68 +364,75 @@ backlight { bl_en: bl-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buttons { pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; eth_phy { eth_phy_pwr: eth-phy-pwr { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \ + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO \ &pcfg_pull_up>; }; dvs_1: dvs-1 { - rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \ + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO \ &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \ + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO \ &pcfg_pull_down>; }; }; sdmmc { sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 \ + rockchip,pins = <6 RK_PC4 1 \ &pcfg_pull_none_drv_8ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; pwr_3g: pwr-3g { - rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio { + wifi_enable: wifi-enable { + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; @@ -430,7 +450,7 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; - card-detect-delay = <200>; + broken-cd; disable-wp; /* wp not hooked up */ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; @@ -439,6 +459,24 @@ vqmmc-supply = <&vccio_sd>; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <50000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_18>; + status = "okay"; +}; + &tsadc { rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi index eaf921694e68..445270aa136e 100644 --- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -73,7 +73,7 @@ &pinctrl { codec { hp_det: hp-det { - rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <6 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; /* @@ -82,17 +82,17 @@ * we've got a ts3a227e chip but the driver requires it. */ int_codec: int-codec { - rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <6 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>; }; mic_det: mic-det { - rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <6 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; headset { ts3a227e_int_l: ts3a227e-int-l { - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts index 5c94a33d695d..406146cbff29 100644 --- a/arch/arm/boot/dts/rk3288-veyron-brain.dts +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts @@ -42,23 +42,23 @@ &pinctrl { hdmi { vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { dvs_1: dvs-1 { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; usb-host { usb2_pwr_en: usb2-pwr-en { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index b54746df3661..fbef34578100 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -176,8 +176,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; + regulator-off-in-suspend; }; }; }; @@ -229,6 +228,8 @@ &pinctrl { pinctrl-0 = < /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff &global_pwroff /* Wake only */ @@ -236,6 +237,8 @@ >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff &global_pwroff /* Sleep only */ @@ -244,51 +247,51 @@ backlight { bl_en: bl-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buttons { ap_lid_int_l: ap-lid-int-l { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; charger { ac_present_ap: ac-present-ap { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; cros-ec { ec_int: ec-int { - rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; suspend { suspend_l_wake: suspend-l-wake { - rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>; }; suspend_l_sleep: suspend-l-sleep { - rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_high>; }; }; trackpad { trackpad_int: trackpad-int { - rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb-host { host1_pwr_en: host1-pwr-en { - rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; usbotg_pwren_h: usbotg-pwren-h { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index 9d6814c7f285..e248f55ee8d2 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -138,39 +138,39 @@ &pinctrl { backlight { bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buck-5v { drv_5v: drv-5v { - rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; hdmi { vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; lcd { lcd_enable_h: lcd-en { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index 2ba89895c33a..b1613af83d5d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -11,7 +11,10 @@ / { model = "Google Jerry"; - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", + compatible = "google,veyron-jerry-rev15", "google,veyron-jerry-rev14", + "google,veyron-jerry-rev13", "google,veyron-jerry-rev12", + "google,veyron-jerry-rev11", "google,veyron-jerry-rev10", + "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", "google,veyron-jerry-rev3", "google,veyron-jerry", "google,veyron", "rockchip,rk3288"; @@ -61,7 +64,9 @@ &rk808 { pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; regulators { mic_vcc: LDO_REG2 { @@ -101,39 +106,39 @@ &pinctrl { backlight { bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buck-5v { drv_5v: drv-5v { - rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; hdmi { vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; lcd { lcd_enable_h: lcd-en { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index d889ab3c8235..e852594417b5 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -186,17 +186,17 @@ &pinctrl { hdmi { power_hdmi_on: power-hdmi-on { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-mighty.dts b/arch/arm/boot/dts/rk3288-veyron-mighty.dts new file mode 100644 index 000000000000..27fbc07476d2 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-mighty.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron Mighty Rev 1+ board device tree source + * + * Copyright 2015 Google, Inc + */ + +/dts-v1/; + +#include "rk3288-veyron-jaq.dts" + +/ { + model = "Google Mighty"; + compatible = "google,veyron-mighty-rev5", "google,veyron-mighty-rev4", + "google,veyron-mighty-rev3", "google,veyron-mighty-rev2", + "google,veyron-mighty-rev1", "google,veyron-mighty", + "google,veyron", "rockchip,rk3288"; +}; + +&sdmmc { + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + &sdmmc_wp_gpio &sdmmc_bus4>; + wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + + /delete-property/ disable-wp; +}; + +&pinctrl { + sdmmc { + sdmmc_wp_gpio: sdmmc-wp-gpio { + rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index f95d0c5fcf71..468a1818545d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -191,65 +191,65 @@ &pinctrl { backlight { bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buck-5v { drv_5v: drv-5v { - rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buttons { volum_down_l: volum-down-l { - rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <5 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; }; volum_up_l: volum-up-l { - rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <5 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; hdmi { vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; lcd { lcd_enable_h: lcd-en { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; prochot { gpio_prochot: gpio-prochot { - rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; touchscreen { touch_int: touch-int { - rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; touch_rst: touch-rst { - rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 2950aadf49f0..9645be7b3d8c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -55,19 +55,19 @@ &pinctrl { buttons { pwr_key_h: pwr-key-h { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; emmc { emmc_reset: emmc-reset { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; sdmmc { sdmmc_wp_gpio: sdmmc-wp-gpio { - rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index a4570444cc79..fe950f9863e8 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -16,18 +16,18 @@ * We also have external pulls, so disable the internal ones. */ sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_none_drv_8ma>, + <6 RK_PC1 1 &pcfg_pull_none_drv_8ma>, + <6 RK_PC2 1 &pcfg_pull_none_drv_8ma>, + <6 RK_PC3 1 &pcfg_pull_none_drv_8ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_none_drv_8ma>; }; /* @@ -37,12 +37,12 @@ * think there's a card inserted */ sdmmc_cd_disabled: sdmmc-cd-disabled { - rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <6 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; /* This is where we actually hook up CD */ sdmmc_cd_gpio: sdmmc-cd-gpio { - rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index e16421d80d22..2ac8748a3a0c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -104,39 +104,39 @@ &pinctrl { backlight { bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buck-5v { drv_5v: drv-5v { - rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; hdmi { vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; lcd { lcd_enable_h: lcd-en { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index d8bf939a3aff..1252522392c7 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -10,6 +10,10 @@ #include "rk3288.dtsi" / { + chosen { + stdout-path = "serial2:115200n8"; + }; + /* * The default coreboot on veyron devices ignores memory@0 nodes * and would instead create another memory node. @@ -21,8 +25,6 @@ gpio_keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pwr_key_l>; @@ -58,12 +60,19 @@ pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>; /* - * On the module itself this is one of these (depending - * on the actual card populated): + * Depending on the actual card populated GPIO4 D4 and D5 + * correspond to one of these signals on the module: + * + * D4: * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) + * + * D5: + * - BT_I2S_WS_BT_RFDISABLE_L + * - No connect */ - reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>, + <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>; }; vcc_5v: vcc-5v { @@ -91,6 +100,23 @@ regulator-boot-on; vin-supply = <&vcc_5v>; }; + + vdd_logic: vdd-logic { + compatible = "pwm-regulator"; + regulator-name = "vdd_logic"; + + pwms = <&pwm1 0 1994 0>; + pwm-supply = <&vcc33_sys>; + + pwm-dutycycle-range = <0x7b 0>; + pwm-dutycycle-unit = <0x94>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <4000>; + }; }; &cpu0 { @@ -191,8 +217,7 @@ regulator-max-microvolt = <1250000>; regulator-ramp-delay = <6001>; regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; + regulator-off-in-suspend; }; }; @@ -374,10 +399,6 @@ &uart0 { status = "okay"; - /* We need to go faster than 24MHz, so adjust clock parents / rates */ - assigned-clocks = <&cru SCLK_UART0>; - assigned-clock-rates = <48000000>; - /* Pins don't include flow control by default; add that in */ pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; @@ -429,10 +450,14 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = < /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff &global_pwroff >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff &global_pwroff >; @@ -456,13 +481,13 @@ buttons { pwr_key_l: pwr-key-l { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; emmc { emmc_reset: emmc-reset { - rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; /* @@ -470,51 +495,51 @@ * We also have external pulls, so disable the internal ones. */ emmc_clk: emmc-clk { - rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none_drv_8ma>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none_drv_8ma>; }; emmc_bus8: emmc-bus8 { - rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <3 RK_PA0 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA1 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA2 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA3 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA4 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA5 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA6 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA7 2 &pcfg_pull_none_drv_8ma>; }; }; pmic { pmic_int_l: pmic-int-l { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; reboot { ap_warm_reset_h: ap-warm-reset-h { - rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; recovery-switch { rec_mode_l: rec-mode-l { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; sdio0 { wifi_enable_h: wifienable-h { - rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; /* NOTE: mislabelled on schematic; should be bt_enable_h */ bt_enable_l: bt-enable-l { - rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; /* @@ -522,30 +547,30 @@ * We also have external pulls, so disable the internal ones. */ sdio0_bus4: sdio0-bus4 { - rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <4 RK_PC4 1 &pcfg_pull_none_drv_8ma>, + <4 RK_PC5 1 &pcfg_pull_none_drv_8ma>, + <4 RK_PC6 1 &pcfg_pull_none_drv_8ma>, + <4 RK_PC7 1 &pcfg_pull_none_drv_8ma>; }; sdio0_cmd: sdio0-cmd { - rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <4 RK_PD0 1 &pcfg_pull_none_drv_8ma>; }; sdio0_clk: sdio0-clk { - rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>; }; }; tpm { tpm_int_h: tpm-int-h { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; write-protect { fw_wp_ap: fw-wp-ap { - rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index 4856a9fc0aea..ba06e9f97ddc 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -121,7 +121,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; @@ -449,13 +448,13 @@ pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb_host { phy_pwr_en: phy-pwr-en { - rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; }; usb2_pwr_en: usb2-pwr-en { @@ -465,7 +464,7 @@ usb_otg { otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index ca7d52daa8fb..aa017abf4f42 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -64,36 +64,40 @@ #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; + dynamic-power-coefficient = <370>; }; cpu1: cpu@501 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x501>; resets = <&cru SRST_CORE1>; - operating-points = <&cpu_opp_table>; + operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; + dynamic-power-coefficient = <370>; }; cpu2: cpu@502 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x502>; resets = <&cru SRST_CORE2>; - operating-points = <&cpu_opp_table>; + operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; + dynamic-power-coefficient = <370>; }; cpu3: cpu@503 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x503>; resets = <&cru SRST_CORE3>; - operating-points = <&cpu_opp_table>; + operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; + dynamic-power-coefficient = <370>; }; }; @@ -569,6 +573,7 @@ pinctrl-1 = <&otp_out>; pinctrl-2 = <&otp_gpio>; #thermal-sensor-cells = <1>; + rockchip,grf = <&grf>; rockchip,hw-tshut-temp = <95000>; status = "disabled"; }; @@ -616,6 +621,7 @@ dr_mode = "host"; phys = <&usbphy2>; phy-names = "usb2-phy"; + snps,reset-phy-on-wake; status = "disabled"; }; @@ -904,6 +910,8 @@ clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; #clock-cells = <0>; + resets = <&cru SRST_USBOTG_PHY>; + reset-names = "phy-reset"; }; usbphy1: usb-phy@334 { @@ -912,6 +920,8 @@ clocks = <&cru SCLK_OTGPHY1>; clock-names = "phyclk"; #clock-cells = <0>; + resets = <&cru SRST_USBHOST0_PHY>; + reset-names = "phy-reset"; }; usbphy2: usb-phy@348 { @@ -920,6 +930,8 @@ clocks = <&cru SCLK_OTGPHY2>; clock-names = "phyclk"; #clock-cells = <0>; + resets = <&cru SRST_USBHOST1_PHY>; + reset-names = "phy-reset"; }; }; }; @@ -1119,8 +1131,6 @@ clock-names = "ref", "pclk"; power-domains = <&power RK3288_PD_VIO>; rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; ports { @@ -1282,27 +1292,27 @@ gpu_opp_table: gpu-opp-table { compatible = "operating-points-v2"; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <950000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <950000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <1000000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1100000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1200000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1250000>; }; @@ -1378,19 +1388,6 @@ reg = <0x0 0xffaf0080 0x0 0x20>; }; - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - interrupt-controller; - #interrupt-cells = <3>; - #address-cells = <0>; - - reg = <0x0 0xffc01000 0x0 0x1000>, - <0x0 0xffc02000 0x0 0x2000>, - <0x0 0xffc04000 0x0 0x2000>, - <0x0 0xffc06000 0x0 0x2000>; - interrupts = <GIC_PPI 9 0xf04>; - }; - efuse: efuse@ffb40000 { compatible = "rockchip,rk3288-efuse"; reg = <0x0 0xffb40000 0x0 0x20>; @@ -1404,6 +1401,19 @@ }; }; + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x0 0xffc01000 0x0 0x1000>, + <0x0 0xffc02000 0x0 0x2000>, + <0x0 0xffc04000 0x0 0x2000>, + <0x0 0xffc06000 0x0 0x2000>; + interrupts = <GIC_PPI 9 0xf04>; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3288-pinctrl"; rockchip,grf = <&grf>; @@ -1531,16 +1541,16 @@ hdmi { hdmi_cec_c0: hdmi-cec-c0 { - rockchip,pins = <7 RK_PC0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC0 2 &pcfg_pull_none>; }; hdmi_cec_c7: hdmi-cec-c7 { - rockchip,pins = <7 RK_PC7 RK_FUNC_4 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC7 4 &pcfg_pull_none>; }; hdmi_ddc: hdmi-ddc { - rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>, - <7 20 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>, + <7 RK_PC4 2 &pcfg_pull_none>; }; }; @@ -1563,421 +1573,421 @@ sleep { global_pwroff: global-pwroff { - rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>; }; ddrio_pwroff: ddrio-pwroff { - rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>; }; ddr0_retention: ddr0-retention { - rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PA2 1 &pcfg_pull_up>; }; ddr1_retention: ddr1-retention { - rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PA3 1 &pcfg_pull_up>; }; }; edp { edp_hpd: edp-hpd { - rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>; + rockchip,pins = <7 RK_PB3 2 &pcfg_pull_down>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>, - <0 16 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>, + <0 RK_PC0 1 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>, - <8 5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <8 RK_PA4 1 &pcfg_pull_none>, + <8 RK_PA5 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { - rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>, - <6 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <6 RK_PB1 1 &pcfg_pull_none>, + <6 RK_PB2 1 &pcfg_pull_none>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { - rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>, - <2 17 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>, + <2 RK_PC1 1 &pcfg_pull_none>; }; }; i2c4 { i2c4_xfer: i2c4-xfer { - rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>, - <7 18 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC1 1 &pcfg_pull_none>, + <7 RK_PC2 1 &pcfg_pull_none>; }; }; i2c5 { i2c5_xfer: i2c5-xfer { - rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>, - <7 20 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC3 1 &pcfg_pull_none>, + <7 RK_PC4 1 &pcfg_pull_none>; }; }; i2s0 { i2s0_bus: i2s0-bus { - rockchip,pins = <6 0 RK_FUNC_1 &pcfg_pull_none>, - <6 1 RK_FUNC_1 &pcfg_pull_none>, - <6 2 RK_FUNC_1 &pcfg_pull_none>, - <6 3 RK_FUNC_1 &pcfg_pull_none>, - <6 4 RK_FUNC_1 &pcfg_pull_none>, - <6 8 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <6 RK_PA0 1 &pcfg_pull_none>, + <6 RK_PA1 1 &pcfg_pull_none>, + <6 RK_PA2 1 &pcfg_pull_none>, + <6 RK_PA3 1 &pcfg_pull_none>, + <6 RK_PA4 1 &pcfg_pull_none>, + <6 RK_PB0 1 &pcfg_pull_none>; }; }; lcdc { lcdc_ctl: lcdc-ctl { - rockchip,pins = <1 24 RK_FUNC_1 &pcfg_pull_none>, - <1 25 RK_FUNC_1 &pcfg_pull_none>, - <1 26 RK_FUNC_1 &pcfg_pull_none>, - <1 27 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>, + <1 RK_PD1 1 &pcfg_pull_none>, + <1 RK_PD2 1 &pcfg_pull_none>, + <1 RK_PD3 1 &pcfg_pull_none>; }; }; sdmmc { sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up>; }; sdmmc_cd: sdmmc-cd { - rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <6 RK_PC6 1 &pcfg_pull_up>; }; sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up>; }; sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>, - <6 17 RK_FUNC_1 &pcfg_pull_up>, - <6 18 RK_FUNC_1 &pcfg_pull_up>, - <6 19 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up>, + <6 RK_PC1 1 &pcfg_pull_up>, + <6 RK_PC2 1 &pcfg_pull_up>, + <6 RK_PC3 1 &pcfg_pull_up>; }; }; sdio0 { sdio0_bus1: sdio0-bus1 { - rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PC4 1 &pcfg_pull_up>; }; sdio0_bus4: sdio0-bus4 { - rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>, - <4 21 RK_FUNC_1 &pcfg_pull_up>, - <4 22 RK_FUNC_1 &pcfg_pull_up>, - <4 23 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PC4 1 &pcfg_pull_up>, + <4 RK_PC5 1 &pcfg_pull_up>, + <4 RK_PC6 1 &pcfg_pull_up>, + <4 RK_PC7 1 &pcfg_pull_up>; }; sdio0_cmd: sdio0-cmd { - rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PD0 1 &pcfg_pull_up>; }; sdio0_clk: sdio0-clk { - rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none>; }; sdio0_cd: sdio0-cd { - rockchip,pins = <4 26 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PD2 1 &pcfg_pull_up>; }; sdio0_wp: sdio0-wp { - rockchip,pins = <4 27 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PD3 1 &pcfg_pull_up>; }; sdio0_pwr: sdio0-pwr { - rockchip,pins = <4 28 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PD4 1 &pcfg_pull_up>; }; sdio0_bkpwr: sdio0-bkpwr { - rockchip,pins = <4 29 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PD5 1 &pcfg_pull_up>; }; sdio0_int: sdio0-int { - rockchip,pins = <4 30 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PD6 1 &pcfg_pull_up>; }; }; sdio1 { sdio1_bus1: sdio1-bus1 { - rockchip,pins = <3 24 4 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD0 4 &pcfg_pull_up>; }; sdio1_bus4: sdio1-bus4 { - rockchip,pins = <3 24 4 &pcfg_pull_up>, - <3 25 4 &pcfg_pull_up>, - <3 26 4 &pcfg_pull_up>, - <3 27 4 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD0 4 &pcfg_pull_up>, + <3 RK_PD1 4 &pcfg_pull_up>, + <3 RK_PD2 4 &pcfg_pull_up>, + <3 RK_PD3 4 &pcfg_pull_up>; }; sdio1_cd: sdio1-cd { - rockchip,pins = <3 28 4 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD4 4 &pcfg_pull_up>; }; sdio1_wp: sdio1-wp { - rockchip,pins = <3 29 4 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD5 4 &pcfg_pull_up>; }; sdio1_bkpwr: sdio1-bkpwr { - rockchip,pins = <3 30 4 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD6 4 &pcfg_pull_up>; }; sdio1_int: sdio1-int { - rockchip,pins = <3 31 4 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD7 4 &pcfg_pull_up>; }; sdio1_cmd: sdio1-cmd { - rockchip,pins = <4 6 4 &pcfg_pull_up>; + rockchip,pins = <4 RK_PA6 4 &pcfg_pull_up>; }; sdio1_clk: sdio1-clk { - rockchip,pins = <4 7 4 &pcfg_pull_none>; + rockchip,pins = <4 RK_PA7 4 &pcfg_pull_none>; }; sdio1_pwr: sdio1-pwr { - rockchip,pins = <4 9 4 &pcfg_pull_up>; + rockchip,pins = <4 RK_PB1 4 &pcfg_pull_up>; }; }; emmc { emmc_clk: emmc-clk { - rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <3 RK_PC0 2 &pcfg_pull_up>; }; emmc_pwr: emmc-pwr { - rockchip,pins = <3 9 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <3 RK_PB1 2 &pcfg_pull_up>; }; emmc_bus1: emmc-bus1 { - rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>; }; emmc_bus4: emmc-bus4 { - rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>, - <3 1 RK_FUNC_2 &pcfg_pull_up>, - <3 2 RK_FUNC_2 &pcfg_pull_up>, - <3 3 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>, + <3 RK_PA1 2 &pcfg_pull_up>, + <3 RK_PA2 2 &pcfg_pull_up>, + <3 RK_PA3 2 &pcfg_pull_up>; }; emmc_bus8: emmc-bus8 { - rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>, - <3 1 RK_FUNC_2 &pcfg_pull_up>, - <3 2 RK_FUNC_2 &pcfg_pull_up>, - <3 3 RK_FUNC_2 &pcfg_pull_up>, - <3 4 RK_FUNC_2 &pcfg_pull_up>, - <3 5 RK_FUNC_2 &pcfg_pull_up>, - <3 6 RK_FUNC_2 &pcfg_pull_up>, - <3 7 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>, + <3 RK_PA1 2 &pcfg_pull_up>, + <3 RK_PA2 2 &pcfg_pull_up>, + <3 RK_PA3 2 &pcfg_pull_up>, + <3 RK_PA4 2 &pcfg_pull_up>, + <3 RK_PA5 2 &pcfg_pull_up>, + <3 RK_PA6 2 &pcfg_pull_up>, + <3 RK_PA7 2 &pcfg_pull_up>; }; }; spi0 { spi0_clk: spi0-clk { - rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <5 RK_PB4 1 &pcfg_pull_up>; }; spi0_cs0: spi0-cs0 { - rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <5 RK_PB5 1 &pcfg_pull_up>; }; spi0_tx: spi0-tx { - rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <5 RK_PB6 1 &pcfg_pull_up>; }; spi0_rx: spi0-rx { - rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <5 RK_PB7 1 &pcfg_pull_up>; }; spi0_cs1: spi0-cs1 { - rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <5 RK_PC0 1 &pcfg_pull_up>; }; }; spi1 { spi1_clk: spi1-clk { - rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <7 RK_PB4 2 &pcfg_pull_up>; }; spi1_cs0: spi1-cs0 { - rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <7 RK_PB5 2 &pcfg_pull_up>; }; spi1_rx: spi1-rx { - rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <7 RK_PB6 2 &pcfg_pull_up>; }; spi1_tx: spi1-tx { - rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <7 RK_PB7 2 &pcfg_pull_up>; }; }; spi2 { spi2_cs1: spi2-cs1 { - rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <8 RK_PA3 1 &pcfg_pull_up>; }; spi2_clk: spi2-clk { - rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <8 RK_PA6 1 &pcfg_pull_up>; }; spi2_cs0: spi2-cs0 { - rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <8 RK_PA7 1 &pcfg_pull_up>; }; spi2_rx: spi2-rx { - rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <8 RK_PB0 1 &pcfg_pull_up>; }; spi2_tx: spi2-tx { - rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <8 RK_PB1 1 &pcfg_pull_up>; }; }; uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>, - <4 17 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <4 RK_PC0 1 &pcfg_pull_up>, + <4 RK_PC1 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { - rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PC2 1 &pcfg_pull_up>; }; uart0_rts: uart0-rts { - rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <4 RK_PC3 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <5 8 RK_FUNC_1 &pcfg_pull_up>, - <5 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <5 RK_PB0 1 &pcfg_pull_up>, + <5 RK_PB1 1 &pcfg_pull_none>; }; uart1_cts: uart1-cts { - rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <5 RK_PB2 1 &pcfg_pull_up>; }; uart1_rts: uart1-rts { - rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <5 RK_PB3 1 &pcfg_pull_none>; }; }; uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <7 22 RK_FUNC_1 &pcfg_pull_up>, - <7 23 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC6 1 &pcfg_pull_up>, + <7 RK_PC7 1 &pcfg_pull_none>; }; /* no rts / cts for uart2 */ }; uart3 { uart3_xfer: uart3-xfer { - rockchip,pins = <7 7 RK_FUNC_1 &pcfg_pull_up>, - <7 8 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PA7 1 &pcfg_pull_up>, + <7 RK_PB0 1 &pcfg_pull_none>; }; uart3_cts: uart3-cts { - rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <7 RK_PB1 1 &pcfg_pull_up>; }; uart3_rts: uart3-rts { - rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PB2 1 &pcfg_pull_none>; }; }; uart4 { uart4_xfer: uart4-xfer { - rockchip,pins = <5 15 3 &pcfg_pull_up>, - <5 14 3 &pcfg_pull_none>; + rockchip,pins = <5 RK_PB7 3 &pcfg_pull_up>, + <5 RK_PB6 3 &pcfg_pull_none>; }; uart4_cts: uart4-cts { - rockchip,pins = <5 12 3 &pcfg_pull_up>; + rockchip,pins = <5 RK_PB4 3 &pcfg_pull_up>; }; uart4_rts: uart4-rts { - rockchip,pins = <5 13 3 &pcfg_pull_none>; + rockchip,pins = <5 RK_PB5 3 &pcfg_pull_none>; }; }; tsadc { otp_gpio: otp-gpio { - rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; otp_out: otp-out { - rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB2 1 &pcfg_pull_none>; }; }; pwm0 { pwm0_pin: pwm0-pin { - rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PA0 1 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { - rockchip,pins = <7 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PA1 1 &pcfg_pull_none>; }; }; pwm2 { pwm2_pin: pwm2-pin { - rockchip,pins = <7 22 3 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC6 3 &pcfg_pull_none>; }; }; pwm3 { pwm3_pin: pwm3-pin { - rockchip,pins = <7 23 3 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC7 3 &pcfg_pull_none>; }; }; gmac { rgmii_pins: rgmii-pins { - rockchip,pins = <3 30 3 &pcfg_pull_none>, - <3 31 3 &pcfg_pull_none>, - <3 26 3 &pcfg_pull_none>, - <3 27 3 &pcfg_pull_none>, - <3 28 3 &pcfg_pull_none_12ma>, - <3 29 3 &pcfg_pull_none_12ma>, - <3 24 3 &pcfg_pull_none_12ma>, - <3 25 3 &pcfg_pull_none_12ma>, - <4 0 3 &pcfg_pull_none>, - <4 5 3 &pcfg_pull_none>, - <4 6 3 &pcfg_pull_none>, - <4 9 3 &pcfg_pull_none_12ma>, - <4 4 3 &pcfg_pull_none_12ma>, - <4 1 3 &pcfg_pull_none>, - <4 3 3 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD6 3 &pcfg_pull_none>, + <3 RK_PD7 3 &pcfg_pull_none>, + <3 RK_PD2 3 &pcfg_pull_none>, + <3 RK_PD3 3 &pcfg_pull_none>, + <3 RK_PD4 3 &pcfg_pull_none_12ma>, + <3 RK_PD5 3 &pcfg_pull_none_12ma>, + <3 RK_PD0 3 &pcfg_pull_none_12ma>, + <3 RK_PD1 3 &pcfg_pull_none_12ma>, + <4 RK_PA0 3 &pcfg_pull_none>, + <4 RK_PA5 3 &pcfg_pull_none>, + <4 RK_PA6 3 &pcfg_pull_none>, + <4 RK_PB1 3 &pcfg_pull_none_12ma>, + <4 RK_PA4 3 &pcfg_pull_none_12ma>, + <4 RK_PA1 3 &pcfg_pull_none>, + <4 RK_PA3 3 &pcfg_pull_none>; }; rmii_pins: rmii-pins { - rockchip,pins = <3 30 3 &pcfg_pull_none>, - <3 31 3 &pcfg_pull_none>, - <3 28 3 &pcfg_pull_none>, - <3 29 3 &pcfg_pull_none>, - <4 0 3 &pcfg_pull_none>, - <4 5 3 &pcfg_pull_none>, - <4 4 3 &pcfg_pull_none>, - <4 1 3 &pcfg_pull_none>, - <4 2 3 &pcfg_pull_none>, - <4 3 3 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD6 3 &pcfg_pull_none>, + <3 RK_PD7 3 &pcfg_pull_none>, + <3 RK_PD4 3 &pcfg_pull_none>, + <3 RK_PD5 3 &pcfg_pull_none>, + <4 RK_PA0 3 &pcfg_pull_none>, + <4 RK_PA5 3 &pcfg_pull_none>, + <4 RK_PA4 3 &pcfg_pull_none>, + <4 RK_PA1 3 &pcfg_pull_none>, + <4 RK_PA2 3 &pcfg_pull_none>, + <4 RK_PA3 3 &pcfg_pull_none>; }; }; spdif { spdif_tx: spdif-tx { - rockchip,pins = <RK_GPIO6 11 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <6 RK_PB3 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts new file mode 100644 index 000000000000..b1db924710c8 --- /dev/null +++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Copyright (C) 2018 O.S. Systems Software LTDA. + */ + +/dts-v1/; + +#include "rv1108.dtsi" + +/ { + model = "Elgin RV1108 R1 board"; + compatible = "elgin,rv1108-r1", "rockchip,rv1108"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x08000000>; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + no-sd; + no-sdio; + non-removable; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <275>; + i2c-scl-falling-time-ns = <16>; + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>; + rockchip,system-power-controller; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vdd_buck2>; + vcc6-supply = <&vdd_buck2>; + + regulators { + vdd_core: DCDC_REG1 { + regulator-name= "vdd_core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_buck2: DCDC_REG2 { + regulator-name= "vdd_buck2"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name= "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name= "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_10: LDO_REG1 { + regulator-name= "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_18: LDO_REG2 { + regulator-name= "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd10_pmu: LDO_REG3 { + regulator-name= "vdd10_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>; + status = "okay"; + + dh2228fv: dac@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-cpha; + spi-cpol; + }; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_host_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts index 203d83e3bbf5..30f3d0470ad9 100644 --- a/arch/arm/boot/dts/rv1108-evb.dts +++ b/arch/arm/boot/dts/rv1108-evb.dts @@ -97,8 +97,8 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-enabled; - regulator-state-uv = <900000>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; }; }; @@ -107,7 +107,7 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <2000000>; regulator-state-mem { - regulator-state-disabled; + regulator-off-in-suspend; }; }; @@ -116,7 +116,7 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-enabled; + regulator-on-in-suspend; }; }; @@ -127,8 +127,8 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-enabled; - regulator-state-uv = <3300000>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; }; }; @@ -139,7 +139,7 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-disabled; + regulator-off-in-suspend; }; }; @@ -150,7 +150,7 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-disabled; + regulator-off-in-suspend; }; }; @@ -161,8 +161,8 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-enabled; - regulator-state-uv = <1000000>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; }; }; }; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index d31370ff28f4..5876690ee09e 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -207,6 +207,7 @@ clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>; clock-names = "spiclk", "apb_pclk"; dmas = <&pdma 8>, <&pdma 9>; + dma-names = "tx", "rx"; #dma-cells = <2>; #address-cells = <1>; #size-cells = <0>; @@ -681,58 +682,58 @@ emmc { emmc_bus8: emmc-bus8 { - rockchip,pins = <2 RK_PA0 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA1 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA2 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA3 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA5 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA6 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA7 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <2 RK_PA0 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA1 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA2 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA3 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA4 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA5 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA6 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA7 2 &pcfg_pull_up_drv_8ma>; }; emmc_clk: emmc-clk { - rockchip,pins = <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none_drv_8ma>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <2 RK_PB4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <2 RK_PB4 2 &pcfg_pull_up_drv_8ma>; }; }; gmac { rmii_pins: rmii-pins { - rockchip,pins = <1 RK_PC5 RK_FUNC_2 &pcfg_pull_none>, - <1 RK_PC3 RK_FUNC_2 &pcfg_pull_none>, - <1 RK_PC4 RK_FUNC_2 &pcfg_pull_none>, - <1 RK_PB2 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, - <1 RK_PB3 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, - <1 RK_PB4 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, - <1 RK_PB5 RK_FUNC_3 &pcfg_pull_none>, - <1 RK_PB6 RK_FUNC_3 &pcfg_pull_none>, - <1 RK_PB7 RK_FUNC_3 &pcfg_pull_none>, - <1 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>, + <1 RK_PC3 2 &pcfg_pull_none>, + <1 RK_PC4 2 &pcfg_pull_none>, + <1 RK_PB2 3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB3 3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB4 3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB5 3 &pcfg_pull_none>, + <1 RK_PB6 3 &pcfg_pull_none>, + <1 RK_PB7 3 &pcfg_pull_none>, + <1 RK_PC2 3 &pcfg_pull_none>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <0 RK_PB1 RK_FUNC_1 &pcfg_pull_none_smt>, - <0 RK_PB2 RK_FUNC_1 &pcfg_pull_none_smt>; + rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none_smt>, + <0 RK_PB2 1 &pcfg_pull_none_smt>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PD3 1 &pcfg_pull_up>, + <2 RK_PD4 1 &pcfg_pull_up>; }; }; i2c2m1 { i2c2m1_xfer: i2c2m1-xfer { - rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>, - <0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC2 2 &pcfg_pull_none>, + <0 RK_PC6 3 &pcfg_pull_none>; }; i2c2m1_gpio: i2c2m1-gpio { @@ -743,8 +744,8 @@ i2c2m05v { i2c2m05v_xfer: i2c2m05v-xfer { - rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>, - <1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD5 2 &pcfg_pull_none>, + <1 RK_PD4 2 &pcfg_pull_none>; }; i2c2m05v_gpio: i2c2m05v-gpio { @@ -755,87 +756,123 @@ i2c3 { i2c3_xfer: i2c3-xfer { - rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, - <0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 1 &pcfg_pull_none>, + <0 RK_PC4 2 &pcfg_pull_none>; }; }; pwm0 { pwm0_pin: pwm0-pin { - rockchip,pins = <0 RK_PC5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC5 1 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { - rockchip,pins = <0 RK_PC4 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>; }; }; pwm2 { pwm2_pin: pwm2-pin { - rockchip,pins = <0 RK_PC6 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC6 1 &pcfg_pull_none>; }; }; pwm3 { pwm3_pin: pwm3-pin { - rockchip,pins = <0 RK_PC0 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC0 1 &pcfg_pull_none>; }; }; pwm4 { pwm4_pin: pwm4-pin { - rockchip,pins = <1 RK_PC1 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC1 3 &pcfg_pull_none>; }; }; pwm5 { pwm5_pin: pwm5-pin { - rockchip,pins = <1 RK_PA7 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA7 2 &pcfg_pull_none>; }; }; pwm6 { pwm6_pin: pwm6-pin { - rockchip,pins = <1 RK_PB0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB0 2 &pcfg_pull_none>; }; }; pwm7 { pwm7_pin: pwm7-pin { - rockchip,pins = <1 RK_PB1 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB1 2 &pcfg_pull_none>; }; }; sdmmc { sdmmc_clk: sdmmc-clk { - rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>; + rockchip,pins = <3 RK_PC4 1 &pcfg_pull_none_drv_4ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + rockchip,pins = <3 RK_PC5 1 &pcfg_pull_up_drv_4ma>; }; sdmmc_cd: sdmmc-cd { - rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_up_drv_4ma>; }; sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + rockchip,pins = <3 RK_PC3 1 &pcfg_pull_up_drv_4ma>; }; sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, - <3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, - <3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, - <3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + rockchip,pins = <3 RK_PC3 1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC2 1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC1 1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC0 1 &pcfg_pull_up_drv_4ma>; + }; + }; + + spim0 { + spim0_clk: spim0-clk { + rockchip,pins = <1 RK_PD0 2 &pcfg_pull_up>; + }; + + spim0_cs0: spim0-cs0 { + rockchip,pins = <1 RK_PD1 2 &pcfg_pull_up>; + }; + + spim0_tx: spim0-tx { + rockchip,pins = <1 RK_PD3 2 &pcfg_pull_up>; + }; + + spim0_rx: spim0-rx { + rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up>; + }; + }; + + spim1 { + spim1_clk: spim1-clk { + rockchip,pins = <0 RK_PA3 1 &pcfg_pull_up>; + }; + + spim1_cs0: spim1-cs0 { + rockchip,pins = <0 RK_PA4 1 &pcfg_pull_up>; + }; + + spim1_rx: spim1-rx { + rockchip,pins = <0 RK_PB0 1 &pcfg_pull_up>; + }; + + spim1_tx: spim1-tx { + rockchip,pins = <0 RK_PA7 1 &pcfg_pull_up>; }; }; tsadc { otp_out: otp-out { - rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>; }; otp_gpio: otp-gpio { @@ -845,16 +882,16 @@ uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>, - <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA6 1 &pcfg_pull_up>, + <3 RK_PA5 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { - rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>; }; uart0_rts: uart0-rts { - rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>; }; uart0_rts_gpio: uart0-rts-gpio { @@ -864,40 +901,40 @@ uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, - <1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD3 1 &pcfg_pull_up>, + <1 RK_PD2 1 &pcfg_pull_none>; }; uart1_cts: uart1-cts { - rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>; }; uart1_rts: uart1-rts { - rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>; }; }; uart2m0 { uart2m0_xfer: uart2m0-xfer { - rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD2 1 &pcfg_pull_up>, + <2 RK_PD1 1 &pcfg_pull_none>; }; }; uart2m1 { uart2m1_xfer: uart2m1-xfer { - rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>, - <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up>, + <3 RK_PC2 2 &pcfg_pull_none>; }; }; uart2_5v { uart2_5v_cts: uart2_5v-cts { - rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>; }; uart2_5v_rts: uart2_5v-rts { - rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD5 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 5164386aff3a..cb371bf72f64 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -19,9 +19,12 @@ clocks { compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; - xti: xti { + xti: xti@0 { compatible = "fixed-clock"; + reg = <0>; clock-frequency = <12000000>; clock-output-names = "xti"; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index 575094ea7024..8ff70b856334 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -23,6 +23,31 @@ 0x50000000 0x08000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mfc_left: region@43000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x43000000 0x2000000>; + }; + + mfc_right: region@51000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x51000000 0x2000000>; + }; + }; + + vibrator_pwr: regulator-fixed-0 { + compatible = "regulator-fixed"; + regulator-name = "vibrator-en"; + enable-active-high; + gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>; + }; + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>; @@ -296,6 +321,22 @@ reg = <0x36>; }; }; + + vibrator: pwm-vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm 1 44642 0>; + pwm-names = "enable"; + vcc-supply = <&vibrator_pwr>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_out>; + }; + + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_syscon>; + offset = <0x681c>; /* PS_HOLD_CONTROL */ + value = <0x5200>; + }; }; &fimd { @@ -329,6 +370,27 @@ status = "okay"; }; +&i2c2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpj0>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_irq>; + reset-gpios = <&gpj1 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&mfc { + memory-region = <&mfc_left>, <&mfc_right>; +}; + &pinctrl0 { wlan_bt_en: wlan-bt-en { samsung,pins = "gpb-5"; @@ -350,6 +412,13 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + bt_host_wake: bt-host-wake { + samsung,pins = "gph2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + tf_detect: tf-detect { samsung,pins = "gph3-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; @@ -362,6 +431,17 @@ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; + + ts_irq: ts-irq { + samsung,pins = "gpj0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&pwm { + samsung,pwm-outputs = <1>; }; &sdhci1 { @@ -399,6 +479,16 @@ &uart0 { status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <115200>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake>; + shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gph2 5 GPIO_ACTIVE_HIGH>; + }; }; &uart1 { diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts index ccf761b1babf..07a8d9bbe5b8 100644 --- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -11,13 +11,6 @@ chosen { stdout-path = &uart2; - /* - * It's hard to change those parameters in stock bootloader, - * since it requires special hardware/cable. - * Let's hardocde bootargs for now, till u-boot port is finished, - * with which it should be easier. - */ - bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk"; }; gpio-keys { diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts index 842276749717..cf161bbfbacf 100644 --- a/arch/arm/boot/dts/s5pv210-galaxys.dts +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -11,13 +11,6 @@ chosen { stdout-path = &uart2; - /* - * It's hard to change those parameters in stock bootloader, - * since it requires special hardware/cable. - * Let's hardocde bootargs for now, till u-boot port is finished, - * with which it should be easier. - */ - bootargs = "root=/dev/mmcblk2p1 rw rootwait ignore_loglevel earlyprintk"; }; nand_pwrseq: nand-pwrseq { diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index eb6d1926c0d6..fbbd93707404 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -376,7 +376,7 @@ vdd_core-supply = <&ldo14_reg>; clock-frequency = <16000000>; - clocks = <&clock_cam 0>; + clocks = <&camera 0>; clock-names = "mclk"; nreset-gpios = <&gpb 2 0>; nstby-gpios = <&gpb 0 0>; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 12eac8930eac..2ad642f51fd9 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -25,6 +25,8 @@ aliases { csis0 = &csis0; + dmc0 = &dmc0; + dmc1 = &dmc1; fimc0 = &fimc0; fimc1 = &fimc1; fimc2 = &fimc2; @@ -78,7 +80,7 @@ }; }; - onenand: onenand@b0000000 { + onenand: onenand@b0600000 { compatible = "samsung,s5pv210-onenand"; reg = <0xb0600000 0x2000>, <0xb0000000 0x20000>, @@ -511,7 +513,7 @@ }; fimd: fimd@f8000000 { - compatible = "samsung,exynos4210-fimd"; + compatible = "samsung,s5pv210-fimd"; interrupt-parent = <&vic2>; reg = <0xf8000000 0x20000>; interrupt-names = "fifo", "vsync", "lcd_sys"; @@ -521,6 +523,16 @@ status = "disabled"; }; + dmc0: dmc@f0000000 { + compatible = "samsung,s5pv210-dmc"; + reg = <0xf0000000 0x1000>; + }; + + dmc1: dmc@f1400000 { + compatible = "samsung,s5pv210-dmc"; + reg = <0xf1400000 0x1000>; + }; + g2d: g2d@fa000000 { compatible = "samsung,s5pv210-g2d"; reg = <0xfa000000 0x1000>; @@ -542,6 +554,15 @@ #dma-requests = <1>; }; + rotator: rotator@fa300000 { + compatible = "samsung,s5pv210-rotator"; + reg = <0xfa300000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <4>; + clocks = <&clocks CLK_ROTATOR>; + clock-names = "rotator"; + }; + i2c1: i2c@fab00000 { compatible = "samsung,s3c2440-i2c"; reg = <0xfab00000 0x1000>; @@ -564,12 +585,10 @@ clock-names = "sclk_cam0", "sclk_cam1"; #address-cells = <1>; #size-cells = <1>; + #clock-cells = <1>; + clock-output-names = "cam_a_clkout", "cam_b_clkout"; ranges; - clock_cam: clock-controller { - #clock-cells = <1>; - }; - csis0: csis@fa600000 { compatible = "samsung,s5pv210-csis"; reg = <0xfa600000 0x4000>; diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h index 1c01a6f843d8..28a2e45752fe 100644 --- a/arch/arm/boot/dts/sama5d2-pinfunc.h +++ b/arch/arm/boot/dts/sama5d2-pinfunc.h @@ -518,7 +518,7 @@ #define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0) #define PIN_PC9__FIQ PINMUX_PIN(PIN_PC9, 1, 3) #define PIN_PC9__GTSUCOMP PINMUX_PIN(PIN_PC9, 2, 1) -#define PIN_PC9__ISC_D0 PINMUX_PIN(PIN_PC9, 2, 1) +#define PIN_PC9__ISC_D0 PINMUX_PIN(PIN_PC9, 3, 1) #define PIN_PC9__TIOA4 PINMUX_PIN(PIN_PC9, 4, 2) #define PIN_PC10 74 #define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0) diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index dc2280d9127f..2e2c1a7b1d1d 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1,55 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC * * Copyright (C) 2015 Atmel, * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include <dt-bindings/dma/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/at91.h> #include <dt-bindings/iio/adc/at91-sama5d2_adc.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel SAMA5D2 family SoC"; compatible = "atmel,sama5d2"; interrupt-parent = <&aic>; @@ -113,6 +77,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x20000000>; }; @@ -686,13 +651,13 @@ ranges = <0 0xf8044000 0x1420>; }; - rstc@f8048000 { + reset_controller: rstc@f8048000 { compatible = "atmel,sama5d3-rstc"; reg = <0xf8048000 0x10>; clocks = <&clk32k>; }; - shdwc@f8048010 { + shutdown_controller: shdwc@f8048010 { compatible = "atmel,sama5d2-shdwc"; reg = <0xf8048010 0x10>; clocks = <&clk32k>; @@ -708,7 +673,7 @@ clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>; }; - watchdog@f8048040 { + watchdog: watchdog@f8048040 { compatible = "atmel,sama5d4-wdt"; reg = <0xf8048040 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 1408fa4a62e4..3bbc84bf8dbf 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1,14 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -16,6 +14,8 @@ #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel SAMA5D3 family SoC"; compatible = "atmel,sama5d3", "atmel,sama5"; interrupt-parent = <&aic>; @@ -56,6 +56,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/sama5d31.dtsi b/arch/arm/boot/dts/sama5d31.dtsi index 883878b32971..cbe8f275ecc4 100644 --- a/arch/arm/boot/dts/sama5d31.dtsi +++ b/arch/arm/boot/dts/sama5d31.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2 or later. */ #include "sama5d3.dtsi" #include "sama5d3_lcd.dtsi" diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts index 25e4c0b2d786..10fc80d6d30d 100644 --- a/arch/arm/boot/dts/sama5d31ek.dts +++ b/arch/arm/boot/dts/sama5d31ek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "sama5d31.dtsi" diff --git a/arch/arm/boot/dts/sama5d33.dtsi b/arch/arm/boot/dts/sama5d33.dtsi index 4b4434aca351..146fd59acea5 100644 --- a/arch/arm/boot/dts/sama5d33.dtsi +++ b/arch/arm/boot/dts/sama5d33.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2 or later. */ #include "sama5d3.dtsi" #include "sama5d3_lcd.dtsi" diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts index c517b87a1de2..7d4ae1682933 100644 --- a/arch/arm/boot/dts/sama5d33ek.dts +++ b/arch/arm/boot/dts/sama5d33ek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "sama5d33.dtsi" diff --git a/arch/arm/boot/dts/sama5d34.dtsi b/arch/arm/boot/dts/sama5d34.dtsi index aa01573fdee9..132918c889a0 100644 --- a/arch/arm/boot/dts/sama5d34.dtsi +++ b/arch/arm/boot/dts/sama5d34.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2 or later. */ #include "sama5d3.dtsi" #include "sama5d3_lcd.dtsi" diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index 15d5c46013a4..2335bf906f69 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "sama5d34.dtsi" diff --git a/arch/arm/boot/dts/sama5d35.dtsi b/arch/arm/boot/dts/sama5d35.dtsi index 16c39f4c96a4..b2ccfa77c4be 100644 --- a/arch/arm/boot/dts/sama5d35.dtsi +++ b/arch/arm/boot/dts/sama5d35.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2 or later. */ #include "sama5d3.dtsi" #include "sama5d3_gmac.dtsi" diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index 6e261fcf576c..8edfcebb1df0 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "sama5d35.dtsi" diff --git a/arch/arm/boot/dts/sama5d36.dtsi b/arch/arm/boot/dts/sama5d36.dtsi index e85139ef40af..5d88f9967138 100644 --- a/arch/arm/boot/dts/sama5d36.dtsi +++ b/arch/arm/boot/dts/sama5d36.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC * * Copyright (C) 2013 Atmel, * 2013 Josh Wu <josh.wu@atmel.com> - * - * Licensed under GPLv2 or later. */ #include "sama5d3.dtsi" #include "sama5d3_can.dtsi" diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts index cd458b85a205..26950f9284c2 100644 --- a/arch/arm/boot/dts/sama5d36ek.dts +++ b/arch/arm/boot/dts/sama5d36ek.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board * * Copyright (C) 2013 Atmel, * 2013 Josh Wu <josh.wu@atmel.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "sama5d36.dtsi" diff --git a/arch/arm/boot/dts/sama5d36ek_cmp.dts b/arch/arm/boot/dts/sama5d36ek_cmp.dts index b632143844e5..66695b9a3e77 100644 --- a/arch/arm/boot/dts/sama5d36ek_cmp.dts +++ b/arch/arm/boot/dts/sama5d36ek_cmp.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board * * Copyright (C) 2016 Atmel, - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "sama5d36.dtsi" diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi index c5a3772741bf..cf06a018ed0f 100644 --- a/arch/arm/boot/dts/sama5d3_can.dtsi +++ b/arch/arm/boot/dts/sama5d3_can.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with * CAN support * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index 6e9e1c2f9def..9aef414bcd2e 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with * Ethernet. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi index 23f225fbb756..3667765a138b 100644 --- a/arch/arm/boot/dts/sama5d3_gmac.dtsi +++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with * Gigabit Ethernet. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi index be7cfefc6c31..2cf046cd4e99 100644 --- a/arch/arm/boot/dts/sama5d3_lcd.dtsi +++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with * LCD support * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index e21099a1aef9..3c83c1c36ac8 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with * 3 MMC ports * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index cb30bdb1a9ca..1584035daf51 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with * 2 TC blocks. * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index f599f8a5f664..4316bdbdc25d 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with * UART support * * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> - * - * Licensed under GPLv2. */ #include <dt-bindings/pinctrl/at91.h> diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 3311a882458b..65566e4b78d8 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * Licensed under GPLv2 or later. */ / { diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi index a02f59021364..9d2563602cbe 100644 --- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module * * Copyright (C) 2016 Atmel, - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi index 035ab72b3990..3c1c4d62fbf9 100644 --- a/arch/arm/boot/dts/sama5d3xdm.dtsi +++ b/arch/arm/boot/dts/sama5d3xdm.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d3dm.dtsi - Device Tree file for SAMA5 display module * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * Licensed under GPLv2 or later. */ / { diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index ef0f2d049e15..35031bbc7e70 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * Licensed under GPLv2 or later. */ #include "sama5d3xcm.dtsi" diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi index 97e171db5970..8a6916a69da4 100644 --- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board * * Copyright (C) 2016 Atmel, - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "sama5d3xcm_cmp.dtsi" diff --git a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi index 2fd14f371a04..a5dd41cd9522 100644 --- a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d3xmb_emac.dts - Device Tree Include file for SAMA5D3x mother board * Ethernet * * Copyright (C) 2016 Atmel, - * - * Licensed under GPLv2 or later. */ / { diff --git a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi index 65aea7a75b1d..d750da38ff3c 100644 --- a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * sama5d3xmb_gmac.dtsi - Device Tree Include file for SAMA5D3x motherboard * Gigabit Ethernet * * Copyright (C) 2016 Atmel, - * - * Licensed under GPLv2 or later. */ / { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 2604fd07dd53..6ab27a7b388d 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1,49 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC * * Copyright (C) 2014 Atmel, * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/at91.h> #include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> @@ -51,6 +13,8 @@ #include <dt-bindings/gpio/gpio.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel SAMA5D4 family SoC"; compatible = "atmel,sama5d4"; interrupt-parent = <&aic>; @@ -90,6 +54,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/skeleton.dtsi b/arch/arm/boot/dts/skeleton.dtsi deleted file mode 100644 index 34eda68d9ea2..000000000000 --- a/arch/arm/boot/dts/skeleton.dtsi +++ /dev/null @@ -1,18 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * This file is deprecated, and will be removed once existing users have been - * updated. New dts{,i} files should *not* include skeleton.dtsi, and should - * instead explicitly provide the below nodes only as required. - * - * Skeleton device tree; the bare minimum needed to boot; just include and - * add a compatible value. The bootloader will typically populate the memory - * node. - */ - -/ { - #address-cells = <1>; - #size-cells = <1>; - chosen { }; - aliases { }; - memory { device_type = "memory"; reg = <0 0>; }; -}; diff --git a/arch/arm/boot/dts/skeleton64.dtsi b/arch/arm/boot/dts/skeleton64.dtsi deleted file mode 100644 index 54e637752b9d..000000000000 --- a/arch/arm/boot/dts/skeleton64.dtsi +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Skeleton device tree in the 64 bits version; the bare minimum - * needed to boot; just include and add a compatible value. The - * bootloader will typically populate the memory node. - */ - -/ { - #address-cells = <2>; - #size-cells = <2>; - chosen { }; - aliases { }; - memory { device_type = "memory"; reg = <0 0 0 0>; }; -}; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index dcb8fba3d709..ec1966480f2f 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -84,6 +84,7 @@ #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; + resets = <&rst DMA_RESET>; }; }; @@ -100,6 +101,7 @@ reg = <0xffc00000 0x1000>; interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; clocks = <&can0_clk>; + resets = <&rst CAN0_RESET>; status = "disabled"; }; @@ -108,6 +110,7 @@ reg = <0xffc01000 0x1000>; interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>; clocks = <&can1_clk>; + resets = <&rst CAN1_RESET>; status = "disabled"; }; @@ -585,6 +588,7 @@ compatible = "snps,dw-apb-gpio"; reg = <0xff708000 0x1000>; clocks = <&l4_mp_clk>; + resets = <&rst GPIO0_RESET>; status = "disabled"; porta: gpio-controller@0 { @@ -605,6 +609,7 @@ compatible = "snps,dw-apb-gpio"; reg = <0xff709000 0x1000>; clocks = <&l4_mp_clk>; + resets = <&rst GPIO1_RESET>; status = "disabled"; portb: gpio-controller@0 { @@ -625,6 +630,7 @@ compatible = "snps,dw-apb-gpio"; reg = <0xff70a000 0x1000>; clocks = <&l4_mp_clk>; + resets = <&rst GPIO2_RESET>; status = "disabled"; portc: gpio-controller@0 { @@ -735,6 +741,7 @@ #size-cells = <0>; clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>; clock-names = "biu", "ciu"; + resets = <&rst SDMMC_RESET>; status = "disabled"; }; @@ -748,6 +755,7 @@ interrupts = <0x0 0x90 0x4>; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; + resets = <&rst NAND_RESET>; status = "disabled"; }; @@ -767,6 +775,7 @@ cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; clocks = <&qspi_clk>; + resets = <&rst QSPI_RESET>; status = "disabled"; }; @@ -785,6 +794,7 @@ sdr: sdr@ffc25000 { compatible = "altr,sdr-ctl", "syscon"; reg = <0xffc25000 0x1000>; + resets = <&rst SDR_RESET>; }; sdramedac { @@ -801,6 +811,7 @@ interrupts = <0 154 4>; num-cs = <4>; clocks = <&spi_m_clk>; + resets = <&rst SPIM0_RESET>; status = "disabled"; }; @@ -812,6 +823,7 @@ interrupts = <0 155 4>; num-cs = <4>; clocks = <&spi_m_clk>; + resets = <&rst SPIM1_RESET>; status = "disabled"; }; @@ -878,6 +890,7 @@ dmas = <&pdma 28>, <&pdma 29>; dma-names = "tx", "rx"; + resets = <&rst UART0_RESET>; }; uart1: serial1@ffc03000 { @@ -890,6 +903,7 @@ dmas = <&pdma 30>, <&pdma 31>; dma-names = "tx", "rx"; + resets = <&rst UART1_RESET>; }; usbphy0: usbphy { @@ -929,6 +943,7 @@ reg = <0xffd02000 0x1000>; interrupts = <0 171 4>; clocks = <&osc1>; + resets = <&rst L4WD0_RESET>; status = "disabled"; }; @@ -937,6 +952,7 @@ reg = <0xffd03000 0x1000>; interrupts = <0 172 4>; clocks = <&osc1>; + resets = <&rst L4WD1_RESET>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index e41fa23481c3..ae24599d5829 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -470,6 +470,7 @@ tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; + resets = <&rst EMAC2_RESET>; clock-names = "stmmaceth"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; @@ -480,6 +481,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc02900 0x100>; + resets = <&rst GPIO0_RESET>; status = "disabled"; porta: gpio-controller@0 { @@ -499,6 +501,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc02a00 0x100>; + resets = <&rst GPIO1_RESET>; status = "disabled"; portb: gpio-controller@0 { @@ -518,6 +521,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc02b00 0x100>; + resets = <&rst GPIO2_RESET>; status = "disabled"; portc: gpio-controller@0 { @@ -548,6 +552,7 @@ reg = <0xffc02200 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C0_RESET>; status = "disabled"; }; @@ -558,6 +563,7 @@ reg = <0xffc02300 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C1_RESET>; status = "disabled"; }; @@ -568,6 +574,7 @@ reg = <0xffc02400 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C2_RESET>; status = "disabled"; }; @@ -578,6 +585,7 @@ reg = <0xffc02500 0x100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C3_RESET>; status = "disabled"; }; @@ -588,6 +596,7 @@ reg = <0xffc02600 0x100>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C4_RESET>; status = "disabled"; }; @@ -600,6 +609,7 @@ num-cs = <4>; /*32bit_access;*/ clocks = <&spi_m_clk>; + resets = <&rst SPIM0_RESET>; status = "disabled"; }; @@ -614,6 +624,7 @@ tx-dma-channel = <&pdma 16>; rx-dma-channel = <&pdma 17>; clocks = <&spi_m_clk>; + resets = <&rst SPIM1_RESET>; status = "disabled"; }; @@ -642,6 +653,7 @@ fifo-depth = <0x400>; clocks = <&l4_mp_clk>, <&sdmmc_clk>; clock-names = "biu", "ciu"; + resets = <&rst SDMMC_RESET>; status = "disabled"; }; @@ -655,6 +667,7 @@ interrupts = <0 99 4>; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; + resets = <&rst NAND_RESET>; status = "disabled"; }; @@ -739,6 +752,7 @@ cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; clocks = <&qspi_clk>; + resets = <&rst QSPI_RESET>; status = "disabled"; }; @@ -815,6 +829,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + resets = <&rst UART0_RESET>; status = "disabled"; }; @@ -825,6 +840,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + resets = <&rst UART1_RESET>; status = "disabled"; }; @@ -865,6 +881,7 @@ reg = <0xffd00200 0x100>; interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sys_free_clk>; + resets = <&rst L4WD0_RESET>; status = "disabled"; }; @@ -873,6 +890,7 @@ reg = <0xffd00300 0x100>; interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sys_free_clk>; + resets = <&rst L4WD1_RESET>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts index df2bab1624d4..64dc0799f3d7 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts @@ -9,6 +9,7 @@ &mmc { status = "okay"; cap-sd-highspeed; + cap-mmc-highspeed; broken-cd; bus-width = <4>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts new file mode 100644 index 000000000000..f6561766d83f --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for the Chameleon96 + * + * Copyright (c) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + */ + +#include <dt-bindings/gpio/gpio.h> + +#include "socfpga_cyclone5.dtsi" + +/ { + model = "Novetech Chameleon96"; + compatible = "novtech,chameleon96", "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x20000000>; /* 512MB */ + }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + leds { + compatible = "gpio-leds"; + + user_led1 { + label = "green:user1"; + gpios = <&porta 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "green:user2"; + gpios = <&porta 22 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + }; + + user_led3 { + label = "green:user3"; + gpios = <&porta 25 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + user_led4 { + label = "green:user4"; + gpios = <&portb 3 GPIO_ACTIVE_LOW>; + panic-indicator; + linux,default-trigger = "none"; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&i2c0 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&i2c1 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; + status = "okay"; +}; + +&spi0 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&spi1 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&uart0 { + /* On Low speed expansion */ + label = "LS-UART1"; + status = "okay"; +}; + +&uart1 { + /* On Low speed expansion */ + label = "LS-UART0"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 0f5f379323a8..8fcb6be6e7c7 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for SPEAr1310 Evaluation Baord * * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 40f4ad3c34c6..c4b49baf9804 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for all SPEAr1310 SoCs * * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /include/ "spear13xx.dtsi" diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index 6565f3cb866f..f70ff56d4542 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for SPEAr1340 Evaluation Baord * * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index d4dbc4098653..1a8f5e8b10e3 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for all SPEAr1340 SoCs * * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /include/ "spear13xx.dtsi" diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 086b4b333249..f187da4485f4 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -1,19 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for all SPEAr13xx SoCs * * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; cpus { diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index e859e8288bcd..2beb30ca2cba 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for SPEAr300 Evaluation Baord * * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index f4e92e599729..b39bd5a22627 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for SPEAr300 SoC * * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /include/ "spear3xx.dtsi" diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index 070f2c1b7851..1c41e4a40334 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for SPEAr310 Evaluation Baord * * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index da210b454753..8ce751a1376d 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for SPEAr310 SoC * * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /include/ "spear3xx.dtsi" diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 1b1034477923..c322407a0ade 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for SPEAr320 Evaluation Baord * * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 0d0da1f65f0e..367ba48aac3e 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for SPEAr320 Evaluation Baord * * Copyright 2012 Shiraz Hashim <shiraz.linux.kernel@gmail.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 22be6e5edaac..3bc1e93a0a55 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for SPEAr320 SoC * * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /include/ "spear3xx.dtsi" diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index 118135d75899..f266b7b03482 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -1,19 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DTS file for all SPEAr3xx SoCs * * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&vic>; cpus { diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts index c67e76c8ba5d..a25b86d149ad 100644 --- a/arch/arm/boot/dts/spear600-evb.dts +++ b/arch/arm/boot/dts/spear600-evb.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Stefan Roese <sr@denx.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 00166eb9be86..fd41243a0b2c 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -1,17 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Stefan Roese <sr@denx.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "st,spear600"; cpus { diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index e6ed7c0354a2..b1a31134f860 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Linaro Ltd - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/interrupt-controller/irq.h> @@ -1196,21 +1190,73 @@ status = "disabled"; }; + gpu@a0300000 { + /* + * This block is referred to as "Smart Graphics Adapter SGA500" + * in documentation but is in practice a pretty straight-forward + * MALI-400 GPU block. + */ + compatible = "stericsson,db8500-mali", "arm,mali-400"; + reg = <0xa0300000 0x10000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "combined"; + clocks = <&prcmu_clk PRCMU_ACLK>, <&prcmu_clk PRCMU_SGACLK>; + clock-names = "bus", "core"; + mali-supply = <&db8500_sga_reg>; + power-domains = <&pm_domains DOMAIN_VAPE>; + }; + mcde@a0350000 { - compatible = "stericsson,mcde"; - reg = <0xa0350000 0x1000>, /* MCDE */ - <0xa0351000 0x1000>, /* DSI link 1 */ - <0xa0352000 0x1000>, /* DSI link 2 */ - <0xa0353000 0x1000>; /* DSI link 3 */ + compatible = "ste,mcde"; + reg = <0xa0350000 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + epod-supply = <&db8500_b2r2_mcde_reg>; + vana-supply = <&ab8500_ldo_ana_reg>; clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */ <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */ - <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */ - <&prcmu_clk PRCMU_DSI0CLK>, /* DSI 0 */ - <&prcmu_clk PRCMU_DSI1CLK>, /* DSI 1 */ - <&prcmu_clk PRCMU_DSI0ESCCLK>, /* TVout clock 0 */ - <&prcmu_clk PRCMU_DSI1ESCCLK>, /* TVout clock 1 */ - <&prcmu_clk PRCMU_DSI2ESCCLK>; /* TVout clock 2 */ + <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */ + clock-names = "mcde", "lcd", "hdmi"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + dsi0: dsi@a0351000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0351000 0x1000>; + vana-supply = <&ab8500_ldo_ana_reg>; + clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>; + clock-names = "hs", "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; + dsi1: dsi@a0352000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0352000 0x1000>; + vana-supply = <&ab8500_ldo_ana_reg>; + clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>; + clock-names = "hs", "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; + dsi2: dsi@a0353000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0353000 0x1000>; + vana-supply = <&ab8500_ldo_ana_reg>; + /* This DSI port only has the Low Power / Energy Save clock */ + clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>; + clock-names = "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; }; cryp@a03cb000 { diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi index 9b69bce9297d..8e3e947d181f 100644 --- a/arch/arm/boot/dts/ste-href-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2014 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ / { diff --git a/arch/arm/boot/dts/ste-href-ab8505.dtsi b/arch/arm/boot/dts/ste-href-ab8505.dtsi index ccf37a9df050..95cf38a008e9 100644 --- a/arch/arm/boot/dts/ste-href-ab8505.dtsi +++ b/arch/arm/boot/dts/ste-href-ab8505.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2014 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ / { diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi index 1ec193b0c506..86621196abda 100644 --- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "ste-nomadik-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 35e944d8b5c4..b17998f4f7ca 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/interrupt-controller/irq.h> @@ -190,5 +184,18 @@ }; }; }; + + mcde@a0350000 { + status = "okay"; + + dsi@a0351000 { + panel { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 0e7d77d719d7..3bafd26b4824 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 ST-Ericsson AB * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - * * Device Tree for the TVK1281618 UIB */ @@ -274,5 +268,18 @@ }; }; }; + + mcde@a0350000 { + status = "okay"; + + dsi@a0351000 { + panel { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index feb682a3d363..6422c53f2046 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts index 18e9795a94f9..aed940bd65a8 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts index 24739914e689..60eed262d920 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index 94eeb7f1c947..a036defdf164 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 ST-Ericsson AB * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - * * Device Tree for the HREF+ prior to the v60 variant. */ diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts index c2e1ba019a2f..0f3c3b86bb20 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 ST-Ericsson AB * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - * * Device Tree for the HREF version 60 or later with the ST UIB */ diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts index ebd8547e98f1..73ea3100f186 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 ST-Ericsson AB * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - * * Device Tree for the HREF version 60 or later with the TVK1281618 UIB */ diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index bf259bbd1d0a..aece8eb2924f 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include "ste-dbx5x0.dtsi" diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 12afdc7467e7..04066f9cb8a3 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree for the ST-Ericsson Nomadik S8815 board - * Produced by Calao Systems + * Device Tree for the ST Microelectronics Nomadik NHK8815 board */ /dts-v1/; @@ -182,43 +181,12 @@ pinctrl-names = "default"; pinctrl-0 = <&clcd_24bit_mux>; port { - nomadik_clcd_pads: endpoint { + nomadik_clcd: endpoint { remote-endpoint = <&nomadik_clcd_panel>; arm,pl11x,tft-r0g0b0-pads = <16 8 0>; }; }; - /* - * WVGA connector 21 - * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB - * with TPO touch screen. - */ - panel { - compatible = "tpo,tpg110", "panel-dpi"; - grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>; - scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; - backlight = <&bl>; - - port { - nomadik_clcd_panel: endpoint { - remote-endpoint = <&nomadik_clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <33200000>; - hactive = <800>; - hback-porch = <216>; - hfront-porch = <40>; - hsync-len = <1>; - vactive = <480>; - vback-porch = <35>; - vfront-porch = <10>; - vsync-len = <1>; - }; - }; }; /* Activate RX/TX and CTS/RTS on UART 0 */ @@ -233,6 +201,55 @@ }; }; + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + /* + * As we're dealing with 3wire SPI, we only define SCK + * and MOSI (in the spec MOSI is called "SDA"). + */ + gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>; + /* + * It's not actually active high, but the frameworks assume + * the polarity of the passed-in GPIO is "normal" (active + * high) then actively drives the line low to select the + * chip. + */ + cs-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + /* + * WVGA connector 21 + * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB + * with TPO touch screen. + */ + panel: display@0 { + /* + * The TPO display driver is connected to a + * 5.7" OSD OSD057VA01CT TFT display. + */ + compatible = "tpo,tpg110"; + reg = <0>; + spi-3wire; + /* 320 ns min period ~= 3 MHz */ + spi-max-frequency = <3000000>; + /* Width and height from the OSD data sheet */ + width-mm = <116>; + height-mm = <87>; + grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>; + backlight = <&bl>; + + port { + nomadik_clcd_panel: endpoint { + remote-endpoint = <&nomadik_clcd>; + }; + }; + }; + }; + bl: backlight { compatible = "pwm-backlight"; pwms = <&stmpe0_pwm 0 500000>; diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi index e6f22b266420..5673a1113aef 100644 --- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 ST-Ericsson - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/pinctrl/nomadik.h> diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index fca76a696d9d..f78b4eabd68c 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -4,13 +4,13 @@ */ #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" / { #address-cells = <1>; #size-cells = <1>; memory { + device_type = "memory"; reg = <0x00000000 0x04000000>, <0x08000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 2de3ce79e496..3428290644ba 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2011 ST-Ericsson AB - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts index 1bd1aba3322f..f4e7660fead7 100644 --- a/arch/arm/boot/dts/ste-u300.dts +++ b/arch/arm/boot/dts/ste-u300.dts @@ -4,7 +4,6 @@ */ /dts-v1/; -/include/ "skeleton.dtsi" / { model = "ST-Ericsson U300"; @@ -22,6 +21,7 @@ }; memory { + device_type = "memory"; reg = <0x48000000 0x03c00000>; }; diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts index 62ce1cecbb1f..31c85f945c6b 100644 --- a/arch/arm/boot/dts/stih407-b2120.dts +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics (R&D) Limited. * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; #include "stih407.dtsi" diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index ea7833489832..1ab40db7c91a 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics R&D Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/stih407-clks.h> / { diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 9e29a4499938..7c36c37260a4 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "stih407-pinctrl.dtsi" #include <dt-bindings/mfd/st-lpc.h> diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index e393519fb84c..2cf335714ca2 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "st-pincfg.h" #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 5b7951ffc350..9e212b0af89d 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 STMicroelectronics Limited. * Author: Gabriel Fernandez <gabriel.fernandez@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "stih407-clock.dtsi" #include "stih407-family.dtsi" diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 2a5a9802a5ec..158b2268748e 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics (R&D) Limited. * Author: Peter Griffin <peter.griffin@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; #include "stih410.dtsi" diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index 4ee6d51d8d1e..4fbd8e9eb5b7 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 STMicroelectronics (R&D) Limited. * Author: Patrice Chotard <patrice.chotard@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; #include "stih410.dtsi" diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi index 5f11d09cb030..81a8c25d7ba5 100644 --- a/arch/arm/boot/dts/stih410-clock.dtsi +++ b/arch/arm/boot/dts/stih410-clock.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics R&D Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/stih410-clks.h> / { diff --git a/arch/arm/boot/dts/stih410-pinctrl.dtsi b/arch/arm/boot/dts/stih410-pinctrl.dtsi index 5ae1fd66c0b8..e6eadd124416 100644 --- a/arch/arm/boot/dts/stih410-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih410-pinctrl.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Peter Griffin <peter.griffin@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "st-pincfg.h" / { diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 888548ea9b5c..6d847019c554 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Peter Griffin <peter.griffin@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "stih410-clock.dtsi" #include "stih407-family.dtsi" diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index cd0d719e31b7..48c3c64e4c48 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 STMicroelectronics (R&D) Limited. * Author: Maxime Coquelin <maxime.coquelin@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; #include "stih418.dtsi" diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi index 13fb8db52fc1..8fa092462102 100644 --- a/arch/arm/boot/dts/stih418-clock.dtsi +++ b/arch/arm/boot/dts/stih418-clock.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 STMicroelectronics R&D Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/stih418-clks.h> / { diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi index 0efb3cd6a86e..83411322bd92 100644 --- a/arch/arm/boot/dts/stih418.dtsi +++ b/arch/arm/boot/dts/stih418.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics Limited. * Author: Peter Griffin <peter.griffin@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include "stih418-clock.dtsi" #include "stih407-family.dtsi" diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 97e05f55fb6e..60e11045ad76 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 STMicroelectronics (R&D) Limited. * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <dt-bindings/clock/stih407-clks.h> #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index ed7d7f46465e..73ea84df7bf4 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -61,6 +61,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x2000000>; }; diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index 8c081eaf20fe..d90b0d1e18c7 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -55,6 +55,7 @@ }; memory { + device_type = "memory"; reg = <0xc0000000 0x2000000>; }; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 5ceb2cf3777f..e19d0fe7dbda 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -60,6 +60,7 @@ }; memory { + device_type = "memory"; reg = <0x90000000 0x800000>; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 8d6f028ae285..4a4954492ed1 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -45,12 +45,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/clock/stm32fx-clock.h> #include <dt-bindings/mfd/stm32f4-rcc.h> / { + #address-cells = <1>; + #size-cells = <1>; + clocks { clk_hse: clk-hse { #clock-cells = <0>; @@ -78,6 +80,19 @@ }; soc { + romem: nvmem@1fff7800 { + compatible = "st,stm32f4-otp"; + reg = <0x1fff7800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ts_cal1: calib@22c { + reg = <0x22c 0x2>; + }; + ts_cal2: calib@22e { + reg = <0x22e 0x2>; + }; + }; + timer2: timer@40000000 { compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; @@ -314,6 +329,26 @@ status = "disabled"; }; + spi2: spi@40003800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40003800 0x400>; + interrupts = <36>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI2)>; + status = "disabled"; + }; + + spi3: spi@40003c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40003c00 0x400>; + interrupts = <51>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI3)>; + status = "disabled"; + }; + usart2: serial@40004400 { compatible = "st,stm32-uart"; reg = <0x40004400 0x400>; @@ -523,6 +558,26 @@ status = "disabled"; }; + spi1: spi@40013000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40013000 0x400>; + interrupts = <35>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI1)>; + status = "disabled"; + }; + + spi4: spi@40013400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40013400 0x400>; + interrupts = <84>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI4)>; + status = "disabled"; + }; + syscfg: system-config@40013800 { compatible = "syscon"; reg = <0x40013800 0x400>; @@ -587,6 +642,26 @@ }; }; + spi5: spi@40015000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40015000 0x400>; + interrupts = <85>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>; + status = "disabled"; + }; + + spi6: spi@40015400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40015400 0x400>; + interrupts = <86>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI6)>; + status = "disabled"; + }; + pwrcfg: power-config@40007000 { compatible = "syscon"; reg = <0x40007000 0x400>; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index 7937b43d7788..a3ff04940aec 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -61,6 +61,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x1000000>; }; diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts index e3a7bd338d61..0ba9c5b08ab9 100644 --- a/arch/arm/boot/dts/stm32f746-disco.dts +++ b/arch/arm/boot/dts/stm32f746-disco.dts @@ -56,6 +56,7 @@ }; memory { + device_type = "memory"; reg = <0xC0000000 0x800000>; }; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index f48d06a80d1d..a25b7000a3a1 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -40,12 +40,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/clock/stm32fx-clock.h> #include <dt-bindings/mfd/stm32f7-rcc.h> / { + #address-cells = <1>; + #size-cells = <1>; + clocks { clk_hse: clk-hse { #clock-cells = <0>; diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts index 483d896e2bc1..6f1d0ac8c31c 100644 --- a/arch/arm/boot/dts/stm32f769-disco.dts +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -56,6 +56,7 @@ }; memory { + device_type = "memory"; reg = <0xC0000000 0x1000000>; }; @@ -101,6 +102,10 @@ }; }; +&rcc { + compatible = "st,stm32f769-rcc", "st,stm32f746-rcc", "st,stm32-rcc"; +}; + &cec { pinctrl-0 = <&cec_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi index 24be8e63dec8..e44e7baa3f17 100644 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -173,6 +173,89 @@ }; }; + ethernet_rmii: rmii@0 { + pins { + pinmux = <STM32_PINMUX('G', 11, AF11)>, + <STM32_PINMUX('G', 13, AF11)>, + <STM32_PINMUX('G', 12, AF11)>, + <STM32_PINMUX('C', 4, AF11)>, + <STM32_PINMUX('C', 5, AF11)>, + <STM32_PINMUX('A', 7, AF11)>, + <STM32_PINMUX('C', 1, AF11)>, + <STM32_PINMUX('A', 2, AF11)>, + <STM32_PINMUX('A', 1, AF11)>; + slew-rate = <2>; + }; + }; + + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + pins2{ + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + usart1_pins: usart1@0 { pins1 { pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */ diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index cbdd69ca9e7a..c065266ee377 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -40,13 +40,15 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/clock/stm32h7-clks.h> #include <dt-bindings/mfd/stm32h7-rcc.h> #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + clocks { clk_hse: clk-hse { #clock-cells = <0>; @@ -337,6 +339,20 @@ dma-requests = <32>; }; + sdmmc1: sdmmc@52007000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x52007000 0x1000>; + interrupts = <49>; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC1_CK>; + clock-names = "apb_pclk"; + resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + }; + exti: interrupt-controller@58000000 { compatible = "st,stm32h7-exti"; interrupt-controller; @@ -511,6 +527,19 @@ status = "disabled"; }; }; + + mac: ethernet@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc ETH1MAC_CK>, <&rcc ETH1TX_CK>, <&rcc ETH1RX_CK>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts index 45e088c55741..3acd2e9c434e 100644 --- a/arch/arm/boot/dts/stm32h743i-disco.dts +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -54,18 +54,56 @@ }; memory { + device_type = "memory"; reg = <0xd0000000 0x2000000>; }; aliases { serial0 = &usart2; }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; &clk_hse { clock-frequency = <25000000>; }; +&mac { + status = "disabled"; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + &usart2 { pinctrl-0 = <&usart2_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index 3f8e0c4a998d..ab78ad532375 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -54,6 +54,7 @@ }; memory { + device_type = "memory"; reg = <0xd0000000 0x2000000>; }; @@ -69,13 +70,20 @@ regulator-always-on; }; + v2v9_sd: regulator-v2v9_sd { + compatible = "regulator-fixed"; + regulator-name = "v2v9_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + usbotg_hs_phy: usb-phy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; clocks = <&rcc USB1ULPI_CK>; clock-names = "main_clk"; }; - }; &adc_12 { @@ -104,6 +112,37 @@ status = "okay"; }; +&mac { + status = "disabled"; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; + broken-cd; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&v2v9_sd>; + status = "okay"; +}; + &usart1 { pinctrl-0 = <&usart1_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index c4851271e810..85c417d9983b 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -157,6 +157,27 @@ }; }; + cec_pins_sleep_a: cec-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ + }; + }; + + cec_pins_b: cec-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, AF5)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_b: cec-sleep-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ + }; + }; + ethernet0_rgmii_pins_a: rgmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ @@ -213,6 +234,13 @@ }; }; + i2c1_pins_sleep_a: i2c1-1 { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + i2c2_pins_a: i2c2-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ @@ -223,6 +251,13 @@ }; }; + i2c2_pins_sleep_a: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + i2c5_pins_a: i2c5-0 { pins { pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ @@ -233,6 +268,152 @@ }; }; + i2c5_pins_sleep_a: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ + + }; + }; + + ltdc_pins_a: ltdc-a-0 { + pins { + pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_a: ltdc-a-1 { + pins { + pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */ + }; + }; + + ltdc_pins_b: ltdc-b-0 { + pins { + pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_b: ltdc-b-1 { + pins { + pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */ + }; + }; + m_can1_pins_a: m-can1-0 { pins1 { pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ @@ -246,6 +427,13 @@ }; }; + m_can1_sleep_pins_a: m_can1-sleep@0 { + pins { + pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */ + }; + }; + pwm2_pins_a: pwm2-0 { pins { pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ @@ -318,6 +506,87 @@ }; }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + pins2{ + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + + spdifrx_pins_a: spdifrx-0 { + pins { + pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ + bias-disable; + }; + }; + + spdifrx_sleep_pins_a: spdifrx-1 { + pins { + pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ @@ -364,6 +633,13 @@ }; }; + i2c4_pins_sleep_a: i2c4-1 { + pins { + pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ + }; + }; + spi1_pins_a: spi1-0 { pins1 { pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts new file mode 100644 index 000000000000..098dbfb06b61 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c.dtsi" +#include "stm32mp157-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; + compatible = "st,stm32mp157a-dk1", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@c0000000 { + reg = <0xc0000000 0x20000000>; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; +}; + +&cec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cec_pins_b>; + pinctrl-1 = <&cec_pins_sleep_b>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts new file mode 100644 index 000000000000..20ea601a546d --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157a-dk1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; + compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; + + reg18: reg18 { + compatible = "regulator-fixed"; + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + phy-dsi-supply = <®18>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_ep1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; + power-supply = <&v3v3>; + status = "okay"; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +<dc { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep1_out: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index f77bea49c079..62a8c78e7e2e 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -7,6 +7,8 @@ #include "stm32mp157c.dtsi" #include "stm32mp157-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> / { model = "STMicroelectronics STM32MP157C eval daughter"; @@ -17,6 +19,7 @@ }; memory@c0000000 { + device_type = "memory"; reg = <0xC0000000 0x40000000>; }; @@ -40,21 +43,173 @@ regulator-always-on; }; - vdd_usb: vdd-usb { - compatible = "regulator-fixed"; - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + sd_switch: regulator-sd_switch { + compatible = "regulator-gpio"; + regulator-name = "sd_switch"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; regulator-always-on; + + gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 2900000 0x0>; }; }; +&dts { + status = "okay"; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v2v8: ldo2 { + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&ipcc { + status = "okay"; }; &iwdg2 { @@ -70,8 +225,26 @@ status = "okay"; }; +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; + broken-cd; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + vqmmc-supply = <&sd_switch>; + status = "okay"; +}; + &timers6 { status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; timer@5 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 063ee8ac5dcb..b6aca40b9b90 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -124,8 +124,9 @@ }; &m_can1 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; status = "okay"; }; @@ -161,6 +162,9 @@ }; &timers2 { + /* spare dmas for other usage (un-delete to enable pwm capture) */ + /delete-property/dmas; + /delete-property/dma-names; status = "disabled"; pwm { pinctrl-0 = <&pwm2_pins_a>; @@ -173,6 +177,8 @@ }; &timers8 { + /delete-property/dmas; + /delete-property/dma-names; status = "disabled"; pwm { pinctrl-0 = <&pwm8_pins_a>; @@ -185,6 +191,8 @@ }; &timers12 { + /delete-property/dmas; + /delete-property/dma-names; status = "disabled"; pwm { pinctrl-0 = <&pwm12_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 8bf1c17f8cef..2afeee65c3ea 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -84,6 +84,31 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&dts>; + + trips { + cpu_alert1: cpu-alert1 { + temperature = <85000>; + hysteresis = <0>; + type = "passive"; + }; + + cpu-crit { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -98,6 +123,12 @@ reg = <0x40000000 0x400>; clocks = <&rcc TIM2_K>; clock-names = "int"; + dmas = <&dmamux1 18 0x400 0x1>, + <&dmamux1 19 0x400 0x1>, + <&dmamux1 20 0x400 0x1>, + <&dmamux1 21 0x400 0x1>, + <&dmamux1 22 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up"; status = "disabled"; pwm { @@ -119,6 +150,13 @@ reg = <0x40001000 0x400>; clocks = <&rcc TIM3_K>; clock-names = "int"; + dmas = <&dmamux1 23 0x400 0x1>, + <&dmamux1 24 0x400 0x1>, + <&dmamux1 25 0x400 0x1>, + <&dmamux1 26 0x400 0x1>, + <&dmamux1 27 0x400 0x1>, + <&dmamux1 28 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig"; status = "disabled"; pwm { @@ -140,6 +178,11 @@ reg = <0x40002000 0x400>; clocks = <&rcc TIM4_K>; clock-names = "int"; + dmas = <&dmamux1 29 0x400 0x1>, + <&dmamux1 30 0x400 0x1>, + <&dmamux1 31 0x400 0x1>, + <&dmamux1 32 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4"; status = "disabled"; pwm { @@ -161,6 +204,13 @@ reg = <0x40003000 0x400>; clocks = <&rcc TIM5_K>; clock-names = "int"; + dmas = <&dmamux1 55 0x400 0x1>, + <&dmamux1 56 0x400 0x1>, + <&dmamux1 57 0x400 0x1>, + <&dmamux1 58 0x400 0x1>, + <&dmamux1 59 0x400 0x1>, + <&dmamux1 60 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig"; status = "disabled"; pwm { @@ -182,6 +232,8 @@ reg = <0x40004000 0x400>; clocks = <&rcc TIM6_K>; clock-names = "int"; + dmas = <&dmamux1 69 0x400 0x1>; + dma-names = "up"; status = "disabled"; timer@5 { @@ -198,6 +250,8 @@ reg = <0x40005000 0x400>; clocks = <&rcc TIM7_K>; clock-names = "int"; + dmas = <&dmamux1 70 0x400 0x1>; + dma-names = "up"; status = "disabled"; timer@6 { @@ -325,6 +379,19 @@ status = "disabled"; }; + spdifrx: audio-controller@4000d000 { + compatible = "st,stm32h7-spdifrx"; + #sound-dai-cells = <0>; + reg = <0x4000d000 0x400>; + clocks = <&rcc SPDIF_K>; + clock-names = "kclk"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 93 0x400 0x01>, + <&dmamux1 94 0x400 0x01>; + dma-names = "rx", "rx-ctrl"; + status = "disabled"; + }; + usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; @@ -465,6 +532,15 @@ reg = <0x44000000 0x400>; clocks = <&rcc TIM1_K>; clock-names = "int"; + dmas = <&dmamux1 11 0x400 0x1>, + <&dmamux1 12 0x400 0x1>, + <&dmamux1 13 0x400 0x1>, + <&dmamux1 14 0x400 0x1>, + <&dmamux1 15 0x400 0x1>, + <&dmamux1 16 0x400 0x1>, + <&dmamux1 17 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", + "up", "trig", "com"; status = "disabled"; pwm { @@ -486,6 +562,15 @@ reg = <0x44001000 0x400>; clocks = <&rcc TIM8_K>; clock-names = "int"; + dmas = <&dmamux1 47 0x400 0x1>, + <&dmamux1 48 0x400 0x1>, + <&dmamux1 49 0x400 0x1>, + <&dmamux1 50 0x400 0x1>, + <&dmamux1 51 0x400 0x1>, + <&dmamux1 52 0x400 0x1>, + <&dmamux1 53 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", + "up", "trig", "com"; status = "disabled"; pwm { @@ -543,6 +628,11 @@ reg = <0x44006000 0x400>; clocks = <&rcc TIM15_K>; clock-names = "int"; + dmas = <&dmamux1 105 0x400 0x1>, + <&dmamux1 106 0x400 0x1>, + <&dmamux1 107 0x400 0x1>, + <&dmamux1 108 0x400 0x1>; + dma-names = "ch1", "up", "trig", "com"; status = "disabled"; pwm { @@ -564,6 +654,9 @@ reg = <0x44007000 0x400>; clocks = <&rcc TIM16_K>; clock-names = "int"; + dmas = <&dmamux1 109 0x400 0x1>, + <&dmamux1 110 0x400 0x1>; + dma-names = "ch1", "up"; status = "disabled"; pwm { @@ -584,6 +677,9 @@ reg = <0x44008000 0x400>; clocks = <&rcc TIM17_K>; clock-names = "int"; + dmas = <&dmamux1 111 0x400 0x1>, + <&dmamux1 112 0x400 0x1>; + dma-names = "ch1", "up"; status = "disabled"; pwm { @@ -684,14 +780,14 @@ m_can1: can@4400e000 { compatible = "bosch,m_can"; - reg = <0x4400e000 0x400>, <0x44011000 0x2800>; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; reg-names = "m_can", "message_ram"; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; status = "disabled"; }; @@ -803,6 +899,21 @@ status = "disabled"; }; + ipcc: mailbox@4c001000 { + compatible = "st,stm32mp1-ipcc"; + #mbox-cells = <1>; + reg = <0x4c001000 0x400>; + st,proc-id = <0>; + interrupts-extended = + <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <&exti 61 1>; + interrupt-names = "rx", "tx", "wakeup"; + clocks = <&rcc IPCC>; + wakeup-source; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -820,6 +931,7 @@ syscfg: syscon@50020000 { compatible = "st,stm32mp157-syscfg", "syscon"; reg = <0x50020000 0x400>; + clocks = <&rcc SYSCFG>; }; lptimer2: timer@50021000 { @@ -908,6 +1020,16 @@ status = "disabled"; }; + dts: thermal@50028000 { + compatible = "st,stm32-thermal"; + reg = <0x50028000 0x100>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc TMPSENS>; + clock-names = "pclk"; + #thermal-sensor-cells = <0>; + status = "disabled"; + }; + cryp1: cryp@54001000 { compatible = "st,stm32mp1-cryp"; reg = <0x54001000 0x400>; @@ -957,6 +1079,20 @@ status = "disabled"; }; + sdmmc1: sdmmc@58005000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x58005000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC1_K>; + clock-names = "apb_pclk"; + resets = <&rcc SDMMC1_R>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + }; + crc1: crc@58009000 { compatible = "st,stm32f7-crc"; reg = <0x58009000 0x400>; @@ -1106,6 +1242,19 @@ status = "disabled"; }; + bsec: nvmem@5c005000 { + compatible = "st,stm32mp15-bsec"; + reg = <0x5c005000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ts_cal1: calib@5c { + reg = <0x5c 0x2>; + }; + ts_cal2: calib@5e { + reg = <0x5e 0x2>; + }; + }; + i2c6: i2c@5c009000 { compatible = "st,stm32f7-i2c"; reg = <0x5c009000 0x400>; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index cf7b392dff31..74262988881c 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -131,20 +131,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -165,10 +151,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 197a1f2b75ff..7306c65df88a 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -184,12 +184,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; }; ®_ahci_5v { @@ -254,9 +248,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index 896e27a08727..8ee3ff42bd55 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -158,20 +158,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -223,10 +209,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index f63767cddd8e..bf2044bac42f 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -86,20 +86,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -121,10 +107,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index 26d0c1d6a02b..ca878384e902 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -164,20 +164,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -233,10 +219,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 71c27ea0b53e..76016f2ca29d 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -150,20 +150,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -209,10 +195,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 2f0d966f39ad..0a562b2cc5bc 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -61,8 +61,6 @@ gpio-keys { compatible = "gpio-keys-polled"; - pinctrl-names = "default"; - pinctrl-0 = <&key_pins_inet9f>; poll-interval = <20>; left-joystick-left { @@ -70,7 +68,7 @@ linux,code = <ABS_X>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */ + gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */ }; left-joystick-right { @@ -78,7 +76,7 @@ linux,code = <ABS_X>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */ + gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */ }; left-joystick-up { @@ -86,7 +84,7 @@ linux,code = <ABS_Y>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ + gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */ }; left-joystick-down { @@ -94,7 +92,7 @@ linux,code = <ABS_Y>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ + gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */ }; right-joystick-left { @@ -102,7 +100,7 @@ linux,code = <ABS_Z>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */ + gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */ }; right-joystick-right { @@ -110,7 +108,7 @@ linux,code = <ABS_Z>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */ + gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */ }; right-joystick-up { @@ -118,7 +116,7 @@ linux,code = <ABS_RZ>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */ + gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */ }; right-joystick-down { @@ -126,7 +124,7 @@ linux,code = <ABS_RZ>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ + gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */ }; dpad-left { @@ -134,7 +132,7 @@ linux,code = <ABS_HAT0X>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */ + gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */ }; dpad-right { @@ -142,7 +140,7 @@ linux,code = <ABS_HAT0X>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */ + gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */ }; dpad-up { @@ -150,7 +148,7 @@ linux,code = <ABS_HAT0Y>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */ + gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */ }; dpad-down { @@ -158,55 +156,55 @@ linux,code = <ABS_HAT0Y>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */ + gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */ }; x { label = "Button X"; linux,code = <BTN_X>; - gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */ + gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */ }; y { label = "Button Y"; linux,code = <BTN_Y>; - gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */ + gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */ }; a { label = "Button A"; linux,code = <BTN_A>; - gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */ + gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */ }; b { label = "Button B"; linux,code = <BTN_B>; - gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */ + gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */ }; select { label = "Select Button"; linux,code = <BTN_SELECT>; - gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */ + gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */ }; start { label = "Start Button"; linux,code = <BTN_START>; - gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */ + gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */ }; top-left { label = "Top Left Button"; linux,code = <BTN_TL>; - gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ + gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */ }; top-right { label = "Top Right Button"; linux,code = <BTN_TR>; - gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */ + gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */ }; }; }; @@ -306,30 +304,6 @@ status = "okay"; }; -&pio { - key_pins_inet9f: key-pins { - pins = "PA0", "PA1", "PA3", "PA4", - "PA5", "PA6", "PA8", "PA9", - "PA11", "PA12", "PA13", - "PA14", "PA15", "PA16", "PA17", - "PH22", "PH23", "PH24", "PH25", "PH26"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -375,10 +349,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 0dbf69576512..58ad2ad9041f 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -148,14 +148,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_usb1_vbus { status = "okay"; }; @@ -183,9 +175,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index b74a61496537..a8e537fd4bd6 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -186,18 +186,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -229,10 +217,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index d82a604f3d9c..0f1e781069e9 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -154,14 +154,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - #include "axp209.dtsi" ®_dcdc2 { @@ -201,9 +193,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */ usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */ status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index 84b25be1ac94..24a3d23e1952 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -146,20 +146,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -211,10 +197,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 5d46bb0139fa..e88daa4ef1af 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -184,6 +184,26 @@ status = "disabled"; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + default-pool { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -224,6 +244,19 @@ status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; }; dma: dma-controller@1c02000 { @@ -234,7 +267,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; @@ -309,6 +342,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 14>; ports { @@ -358,6 +392,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 15>; ports { @@ -394,6 +429,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun4i-a10-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_VE>; + interrupts = <53>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c0f000 0x1000>; @@ -450,13 +496,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; @@ -473,7 +520,6 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -483,7 +529,6 @@ interrupts = <64>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -563,7 +608,6 @@ interrupts = <40>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -573,7 +617,6 @@ interrupts = <65>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index c88f08984483..8af0eae2ddc1 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -119,12 +119,6 @@ }; &pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG12"; - function = "gpio_in"; - bias-pull-up; - }; - led_pins_t004: led-pin { pins = "PB2"; function = "gpio_out"; @@ -149,9 +143,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 262c2ffbdcfa..5340b4164df2 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -218,12 +218,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG12"; - function = "gpio_in"; - bias-pull-up; - }; }; ®_usb0_vbus { @@ -271,9 +265,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index f3cede9beb63..a23bf24792ec 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -127,20 +127,6 @@ status = "okay"; }; -&pio { - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -195,10 +181,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 9369f7453beb..9b9f2a574851 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -124,14 +124,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - #include "axp209.dtsi" ®_dcdc2 { @@ -182,9 +174,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts index ca8f3fd1ddfe..ba8d75b3c716 100644 --- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts +++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts @@ -206,9 +206,8 @@ }; &usbphy { - pinctrl-names = "default"; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_vcc5v0>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 943868e495bc..5df398d77238 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -109,18 +109,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_usb0_vbus { @@ -145,10 +133,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 9409c232d48a..39101228a755 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -74,8 +74,6 @@ bridge { compatible = "dumb-vga-dac"; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; @@ -204,18 +202,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_usb0_vbus { @@ -253,10 +239,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts index a89f29fa3e40..fde559a8b61e 100644 --- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts +++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts @@ -49,19 +49,13 @@ compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; panel: panel { - compatible = "urt,umsh-8596md-t", "simple-panel"; - #address-cells = <1>; - #size-cells = <0>; + compatible = "bananapi,s070wv20-ct16", "simple-panel"; + power-supply = <®_vcc3v3>; + enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */ + backlight = <&backlight>; - port@0 { - reg = <0>; - /* TODO: lcd panel uses axp gpio0 as enable pin */ - backlight = <&backlight>; - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&tcon0_out_lcd>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index 732873cbeedc..be486d28d04f 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -58,13 +58,11 @@ /delete-property/stdout-path; }; - i2c_lcd: i2c-gpio { + i2c_lcd: i2c { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_lcd_pins>; - gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */ - <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */ + sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ + scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */ i2c-gpio,delay-us = <5>; }; }; @@ -94,14 +92,6 @@ }; }; -&pio { - i2c_lcd_pins: i2c-lcd-pin { - pins = "PG10", "PG12"; - function = "gpio_out"; - bias-pull-up; - }; -}; - ®_usb0_vbus { gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ }; diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts index 3f70b8c53132..a32cde3e32eb 100644 --- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts +++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts @@ -133,8 +133,6 @@ status = "okay"; nand@0 { - #address-cells = <2>; - #size-cells = <2>; reg = <0>; allwinner,rb = <0>; nand-ecc-mode = "hw"; @@ -233,7 +231,7 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_vcc5v0>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 86e46aa59134..d003b895a696 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -325,8 +325,8 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index f4298facf9dc..4bf4943d4eb7 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -84,9 +84,7 @@ onewire { compatible = "w1-gpio"; - gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ - pinctrl-names = "default"; - pinctrl-0 = <&chip_w1_pin>; + gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */ }; }; @@ -173,14 +171,6 @@ status = "okay"; }; -&pio { - chip_w1_pin: chip-w1-pin { - pins = "PD2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; @@ -279,7 +269,7 @@ &usbphy { status = "okay"; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_vcc5v0>; diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 6202aabedbfe..1a9926d71410 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -54,7 +54,7 @@ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; - /* TODO: backlight uses axp gpio1 as enable pin */ + enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */ }; chosen { @@ -132,20 +132,6 @@ status = "okay"; }; -&pio { - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -198,10 +184,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 5497d985c54a..2fb438c4fe9d 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -127,6 +127,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + dma-ranges; ranges; system-control@1c00000 { @@ -181,6 +182,14 @@ }; }; + mbus: dram-controller@1c01000 { + compatible = "allwinner,sun5i-a13-mbus"; + reg = <0x01c01000 0x1000>; + clocks = <&ccu 99>; + dma-ranges = <0x00000000 0x40000000 0x20000000>; + #interconnect-cells = <1>; + }; + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; @@ -189,7 +198,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; @@ -238,11 +247,8 @@ status = "disabled"; port { - #address-cells = <1>; - #size-cells = <0>; - tve0_in_tcon0: endpoint@0 { - reg = <0>; + tve0_in_tcon0: endpoint { remote-endpoint = <&tcon0_out_tve0>; }; }; @@ -278,6 +284,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; status = "disabled"; ports { @@ -285,12 +292,9 @@ #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_be0: endpoint@0 { - reg = <0>; + tcon0_in_be0: endpoint { remote-endpoint = <&be0_out_tcon0>; }; }; @@ -365,13 +369,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>; reg-names = "phy_ctrl", "pmu1"; clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb_phy"; @@ -386,7 +391,6 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -396,7 +400,6 @@ interrupts = <40>; clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -501,18 +504,18 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2-8bit-pins { + mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", "PC13", - "PC14", "PC15"; + "PC10", "PC11"; function = "mmc2"; drive-strength = <30>; bias-pull-up; }; - mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11"; + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15"; function = "mmc2"; drive-strength = <30>; bias-pull-up; @@ -536,6 +539,11 @@ function = "nand0"; }; + pwm0_pin: pwm0-pin { + pins = "PB2"; + function = "pwm"; + }; + spi2_pe_pins: spi2-pe-pins { pins = "PE1", "PE2", "PE3"; function = "spi2"; @@ -575,11 +583,6 @@ pins = "PG11", "PG12"; function = "uart3"; }; - - pwm0_pin: pwm0-pin { - pins = "PB2"; - function = "pwm"; - }; }; timer@1c20c00 { @@ -727,6 +730,8 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_DE_FE>; + interconnects = <&mbus 19>; + interconnect-names = "dma-mem"; status = "disabled"; ports { @@ -734,12 +739,9 @@ #size-cells = <0>; fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe0_out_be0: endpoint@0 { - reg = <0>; + fe0_out_be0: endpoint { remote-endpoint = <&be0_in_fe0>; }; }; @@ -755,6 +757,8 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_DE_BE>; + interconnects = <&mbus 18>; + interconnect-names = "dma-mem"; status = "disabled"; assigned-clocks = <&ccu CLK_DE_BE>; @@ -765,23 +769,17 @@ #size-cells = <0>; be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - be0_in_fe0: endpoint@0 { - reg = <0>; + be0_in_fe0: endpoint { remote-endpoint = <&fe0_out_be0>; }; }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_tcon0: endpoint@0 { - reg = <0>; + be0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_be0>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 0b7bedf85fb9..c3d56dc93513 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -63,10 +63,8 @@ i2c_lcd: i2c { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_lcd_pins>; - gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */ - <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */ + sda-gpios = <&pio 0 23 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA23 */ + scl-gpios = <&pio 0 24 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA24 */ i2c-gpio,delay-us = <5>; }; }; @@ -113,14 +111,6 @@ status = "okay"; }; -&pio { - i2c_lcd_pins: i2c-lcd-pins { - pins = "PA23", "PA24"; - function = "gpio_out"; - bias-pull-up; - }; -}; - ®_usb2_vbus { gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index e17a65b3561e..09832b4e8fc8 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -86,31 +86,23 @@ vga-dac { compatible = "dumb-vga-dac"; vdd-supply = <®_vga_3v3>; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - vga_dac_in: endpoint@0 { - reg = <0>; + vga_dac_in: endpoint { remote-endpoint = <&tcon0_out_vga>; }; }; port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - vga_dac_out: endpoint@0 { - reg = <0>; + vga_dac_out: endpoint { remote-endpoint = <&vga_con_in>; }; }; @@ -335,8 +327,8 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ - usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index 0832ac5ae3ec..091eb2ac53b3 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -157,7 +157,6 @@ &spdif { pinctrl-names = "default"; pinctrl-0 = <&spdif_tx_pin>; - spdif-out = "okay"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 13304b8c5139..c04efad81bbc 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -292,6 +292,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; @@ -340,6 +341,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; @@ -491,8 +493,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -508,6 +508,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -542,7 +543,6 @@ clocks = <&ccu CLK_AHB1_EHCI0>; resets = <&ccu RST_AHB1_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -553,7 +553,6 @@ clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_AHB1_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -564,7 +563,6 @@ clocks = <&ccu CLK_AHB1_EHCI1>; resets = <&ccu RST_AHB1_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -575,7 +573,6 @@ clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_AHB1_OHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -1029,7 +1026,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -1229,12 +1226,9 @@ }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_drc0: endpoint@0 { - reg = <0>; + be0_out_drc0: endpoint { remote-endpoint = <&drc0_in_be0>; }; }; @@ -1259,12 +1253,9 @@ #size-cells = <0>; drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc0_in_be0: endpoint@0 { - reg = <0>; + drc0_in_be0: endpoint { remote-endpoint = <&be0_out_drc0>; }; }; @@ -1380,7 +1371,6 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #size-cells = <0>; #gpio-cells = <3>; s_ir_rx_pin: s-ir-rx-pin { diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 60b355f7184c..bc3170a0b8b5 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -260,7 +260,7 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_dldo1>; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 86143de21c22..7de2abd541c1 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -73,14 +73,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PA15"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &p2wi { status = "okay"; @@ -173,9 +165,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_dldo1>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 556b1b591c5d..4df921632f7a 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -191,6 +191,11 @@ }; &pio { + vcc-pa-supply = <®_vcc3v3>; + vcc-pc-supply = <®_vcc3v3>; + vcc-pe-supply = <®_vcc3v3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-pg-supply = <®_vcc3v3>; gpio-line-names = /* PA */ "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3", @@ -241,12 +246,6 @@ "SPI-MISO", "SPI-CE1", "", "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", "", "", "", "", "", "", "", ""; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; }; #include "axp209.dtsi" @@ -324,9 +323,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 200685b0b1cb..08e5a5abf8cc 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -173,14 +173,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_ahci_5v { status = "okay"; }; @@ -236,9 +228,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index f91e1bee44e8..3e170cfac86a 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -229,14 +229,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - #include "axp209.dtsi" &ac_power_supply { @@ -322,9 +314,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts index 823aabce0462..c34a83f666c7 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts @@ -314,8 +314,8 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 5e411194bf62..e40dd47df8ce 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -174,18 +174,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -217,10 +205,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 4e1c590eb098..95c6f8949076 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -174,23 +174,17 @@ }; &pio { + vcc-pa-supply = <®_vcc3v3>; + vcc-pc-supply = <®_vcc3v3>; + vcc-pe-supply = <®_ldo3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-pg-supply = <®_ldo4>; + led_pins_olinuxinolime: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -267,10 +261,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 840ae1194a66..0dcba070444a 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -252,18 +252,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; #include "axp209.dtsi" @@ -355,10 +343,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 15881081cac4..9628041bb3a3 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -176,14 +176,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -239,9 +231,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index d64de2e73a9f..7b3532665c28 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -135,14 +135,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -198,9 +190,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index 538ea15fa32f..173b676436e9 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -168,14 +168,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_ahci_5v { gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; @@ -226,9 +218,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index a72ed4318d04..14a88aa16a97 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -168,14 +168,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_ahci_5v { gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -226,9 +218,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index ffade253d129..6a66b0432dfa 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -156,14 +156,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -223,9 +215,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index c27e56091fb1..f8475a39777b 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -145,14 +145,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -206,9 +198,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 641a8fa6d428..9ad8e445b240 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -333,7 +333,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; @@ -406,6 +406,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 14>; ports { @@ -455,6 +456,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 15>; ports { @@ -586,13 +588,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun7i-a20-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; @@ -609,7 +612,6 @@ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -619,7 +621,6 @@ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -702,7 +703,6 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -712,7 +712,6 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -751,21 +750,31 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + /omit-if-no-ref/ + can_pa_pins: can-pa-pins { + pins = "PA16", "PA17"; + function = "can"; + }; + + /omit-if-no-ref/ can_ph_pins: can-ph-pins { pins = "PH20", "PH21"; function = "can"; }; + /omit-if-no-ref/ clk_out_a_pin: clk-out-a-pin { pins = "PI12"; function = "clk_out_a"; }; + /omit-if-no-ref/ clk_out_b_pin: clk-out-b-pin { pins = "PI13"; function = "clk_out_b"; }; + /omit-if-no-ref/ emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -775,6 +784,17 @@ function = "emac"; }; + /omit-if-no-ref/ + emac_ph_pins: emac-ph-pins { + pins = "PH8", "PH9", "PH10", "PH11", + "PH14", "PH15", "PH16", "PH17", + "PH18", "PH19", "PH20", "PH21", + "PH22", "PH23", "PH24", "PH25", + "PH26"; + function = "emac"; + }; + + /omit-if-no-ref/ gmac_mii_pins: gmac-mii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -784,6 +804,7 @@ function = "gmac"; }; + /omit-if-no-ref/ gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -798,46 +819,55 @@ drive-strength = <40>; }; + /omit-if-no-ref/ i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; + /omit-if-no-ref/ i2c1_pins: i2c1-pins { pins = "PB18", "PB19"; function = "i2c1"; }; + /omit-if-no-ref/ i2c2_pins: i2c2-pins { pins = "PB20", "PB21"; function = "i2c2"; }; + /omit-if-no-ref/ i2c3_pins: i2c3-pins { pins = "PI0", "PI1"; function = "i2c3"; }; + /omit-if-no-ref/ ir0_rx_pin: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; + /omit-if-no-ref/ ir0_tx_pin: ir0-tx-pin { pins = "PB3"; function = "ir0"; }; + /omit-if-no-ref/ ir1_rx_pin: ir1-rx-pin { pins = "PB23"; function = "ir1"; }; + /omit-if-no-ref/ ir1_tx_pin: ir1-tx-pin { pins = "PB22"; function = "ir1"; }; + /omit-if-no-ref/ mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -846,6 +876,7 @@ bias-pull-up; }; + /omit-if-no-ref/ mmc2_pins: mmc2-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; @@ -854,6 +885,7 @@ bias-pull-up; }; + /omit-if-no-ref/ mmc3_pins: mmc3-pins { pins = "PI4", "PI5", "PI6", "PI7", "PI8", "PI9"; @@ -862,127 +894,206 @@ bias-pull-up; }; + /omit-if-no-ref/ ps2_0_pins: ps2-0-pins { pins = "PI20", "PI21"; function = "ps2"; }; + /omit-if-no-ref/ ps2_1_ph_pins: ps2-1-ph-pins { pins = "PH12", "PH13"; function = "ps2"; }; + /omit-if-no-ref/ pwm0_pin: pwm0-pin { pins = "PB2"; function = "pwm"; }; + /omit-if-no-ref/ pwm1_pin: pwm1-pin { pins = "PI3"; function = "pwm"; }; + /omit-if-no-ref/ spdif_tx_pin: spdif-tx-pin { pins = "PB13"; function = "spdif"; bias-pull-up; }; + /omit-if-no-ref/ spi0_pi_pins: spi0-pi-pins { pins = "PI11", "PI12", "PI13"; function = "spi0"; }; + /omit-if-no-ref/ spi0_cs0_pi_pin: spi0-cs0-pi-pin { pins = "PI10"; function = "spi0"; }; + /omit-if-no-ref/ spi0_cs1_pi_pin: spi0-cs1-pi-pin { pins = "PI14"; function = "spi0"; }; + /omit-if-no-ref/ spi1_pi_pins: spi1-pi-pins { pins = "PI17", "PI18", "PI19"; function = "spi1"; }; + /omit-if-no-ref/ spi1_cs0_pi_pin: spi1-cs0-pi-pin { pins = "PI16"; function = "spi1"; }; + /omit-if-no-ref/ spi2_pb_pins: spi2-pb-pins { pins = "PB15", "PB16", "PB17"; function = "spi2"; }; + /omit-if-no-ref/ spi2_cs0_pb_pin: spi2-cs0-pb-pin { pins = "PB14"; function = "spi2"; }; + /omit-if-no-ref/ spi2_pc_pins: spi2-pc-pins { pins = "PC20", "PC21", "PC22"; function = "spi2"; }; + /omit-if-no-ref/ spi2_cs0_pc_pin: spi2-cs0-pc-pin { pins = "PC19"; function = "spi2"; }; + /omit-if-no-ref/ uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; + /omit-if-no-ref/ + uart0_pf_pins: uart0-pf-pins { + pins = "PF2", "PF4"; + function = "uart0"; + }; + + /omit-if-no-ref/ + uart1_pa_pins: uart1-pa-pins { + pins = "PA10", "PA11"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins { + pins = "PA12", "PA13"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart2_pa_pins: uart2-pa-pins { + pins = "PA2", "PA3"; + function = "uart2"; + }; + + /omit-if-no-ref/ + uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins { + pins = "PA0", "PA1"; + function = "uart2"; + }; + + /omit-if-no-ref/ uart2_pi_pins: uart2-pi-pins { pins = "PI18", "PI19"; function = "uart2"; }; + /omit-if-no-ref/ uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins { pins = "PI16", "PI17"; function = "uart2"; }; + /omit-if-no-ref/ uart3_pg_pins: uart3-pg-pins { pins = "PG6", "PG7"; function = "uart3"; }; + /omit-if-no-ref/ uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { pins = "PG8", "PG9"; function = "uart3"; }; + /omit-if-no-ref/ uart3_ph_pins: uart3-ph-pins { pins = "PH0", "PH1"; function = "uart3"; }; + /omit-if-no-ref/ + uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins { + pins = "PH2", "PH3"; + function = "uart3"; + }; + + /omit-if-no-ref/ uart4_pg_pins: uart4-pg-pins { pins = "PG10", "PG11"; function = "uart4"; }; + /omit-if-no-ref/ uart4_ph_pins: uart4-ph-pins { pins = "PH4", "PH5"; function = "uart4"; }; + /omit-if-no-ref/ + uart5_ph_pins: uart5-ph-pins { + pins = "PH6", "PH7"; + function = "uart5"; + }; + + /omit-if-no-ref/ uart5_pi_pins: uart5-pi-pins { pins = "PI10", "PI11"; function = "uart5"; }; + /omit-if-no-ref/ + uart6_pa_pins: uart6-pa-pins { + pins = "PA12", "PA13"; + function = "uart6"; + }; + + /omit-if-no-ref/ uart6_pi_pins: uart6-pi-pins { pins = "PI12", "PI13"; function = "uart6"; }; + /omit-if-no-ref/ + uart7_pa_pins: uart7-pa-pins { + pins = "PA14", "PA15"; + function = "uart7"; + }; + + /omit-if-no-ref/ uart7_pi_pins: uart7-pi-pins { pins = "PI20", "PI21"; function = "uart7"; @@ -1341,7 +1452,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index a9c123de5d2c..af2fa694a467 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -68,6 +68,12 @@ }; }; + de: display-engine { + /* compatible gets set in SoC specific dtsi file */ + allwinner,pipelines = <&fe0>; + status = "disabled"; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -155,6 +161,55 @@ #dma-cells = <1>; }; + nfc: nand-controller@1c03000 { + compatible = "allwinner,sun8i-a23-nand-controller"; + reg = <0x01c03000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_NAND>; + reset-names = "ahb"; + dmas = <&dma 5>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + tcon0: lcd-controller@1c0c000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_LCD>, + <&ccu CLK_LCD_CH0>; + clock-names = "ahb", + "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; + resets = <&ccu RST_BUS_LCD>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + reg = <0>; + + tcon0_in_drc0: endpoint { + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + reg = <1>; + }; + }; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -214,21 +269,6 @@ #size-cells = <0>; }; - nfc: nand@1c03000 { - compatible = "allwinner,sun4i-a10-nand"; - reg = <0x01c03000 0x1000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_NAND>; - reset-names = "ahb"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - usb_otg: usb@1c19000 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c19000 0x0400>; @@ -239,6 +279,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -266,7 +307,6 @@ clocks = <&ccu CLK_BUS_EHCI>; resets = <&ccu RST_BUS_EHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -277,7 +317,6 @@ clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>; resets = <&ccu RST_BUS_OHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -356,25 +395,25 @@ function = "nand0"; }; - nand_pins_cs0: nand-pins-cs0 { + nand_cs0_pin: nand-cs0-pin { pins = "PC4"; function = "nand0"; bias-pull-up; }; - nand_pins_cs1: nand-pins-cs1 { + nand_cs1_pin: nand-cs1-pin { pins = "PC3"; function = "nand0"; bias-pull-up; }; - nand_pins_rb0: nand-pins-rb0 { + nand_rb0_pin: nand-rb0-pin { pins = "PC6"; function = "nand0"; bias-pull-up; }; - nand_pins_rb1: nand-pins-rb1 { + nand_rb1_pin: nand-rb1-pin { pins = "PC7"; function = "nand0"; bias-pull-up; @@ -562,7 +601,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -572,6 +611,96 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + fe0: display-frontend@1e00000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e00000 0x20000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>, + <&ccu CLK_DRAM_DE_FE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_BUS_DE_FE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + reg = <1>; + + fe0_out_be0: endpoint { + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e60000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_BUS_DE_BE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + reg = <0>; + + be0_in_fe0: endpoint { + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + reg = <1>; + + be0_out_drc0: endpoint { + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + drc0: drc@1e70000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e70000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>, + <&ccu CLK_DRAM_DRC>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_DRC>; + + assigned-clocks = <&ccu CLK_DRC>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + reg = <0>; + + drc0_in_be0: endpoint { + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + reg = <1>; + + drc0_out_tcon0: endpoint { + remote-endpoint = <&tcon0_in_drc0>; + }; + }; + }; + }; + rtc: rtc@1f00000 { compatible = "allwinner,sun8i-a23-rtc"; reg = <0x01f00000 0x400>; @@ -654,6 +783,20 @@ status = "disabled"; }; + r_i2c: i2c@1f02400 { + compatible = "allwinner,sun8i-a23-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01f02400 0x400>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins>; + clocks = <&apb0_gates 6>; + resets = <&apb0_rst 6>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -666,6 +809,12 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + r_i2c_pins: r-i2c-pins { + pins = "PL0", "PL1"; + function = "s_i2c"; + bias-pull-up; + }; + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts index b6958e8f2f01..5659c63d7d77 100644 --- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -61,3 +61,13 @@ "Headset Mic", "HBIAS"; status = "okay"; }; + +&panel { + compatible = "bananapi,s070wv20-ct16", "simple-panel"; +}; + +&tcon0_out { + tcon0_out_lcd: endpoint { + remote-endpoint = <&panel_input>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index d00055e9eef5..a5e884a8b2ae 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -62,10 +62,26 @@ }; }; +&be0 { + compatible = "allwinner,sun8i-a23-display-backend"; +}; + &ccu { compatible = "allwinner,sun8i-a23-ccu"; }; +&de { + compatible = "allwinner,sun8i-a23-display-engine"; +}; + +&drc0 { + compatible = "allwinner,sun8i-a23-drc"; +}; + +&fe0 { + compatible = "allwinner,sun8i-a23-display-frontend"; +}; + &pio { compatible = "allwinner,sun8i-a23-pinctrl"; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, @@ -73,6 +89,10 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; }; +&tcon0 { + compatible = "allwinner,sun8i-a23-tcon"; +}; + &usb_otg { compatible = "allwinner,sun6i-a31-musb"; }; diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts index b0bc2360f8c4..9c5750c25613 100644 --- a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts @@ -48,3 +48,10 @@ model = "Q8 A33 Tablet"; compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; }; + +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index f3667268adde..785798e3a104 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -63,16 +63,9 @@ panel { compatible = "netron-dy,e231732"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&tcon0_out_panel>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 626152c30f50..1532a0e59af4 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -159,12 +159,6 @@ }; }; - de: display-engine { - compatible = "allwinner,sun8i-a33-display-engine"; - allwinner,pipelines = <&fe0>; - status = "disabled"; - }; - iio-hwmon { compatible = "iio-hwmon"; io-channels = <&ths>; @@ -209,47 +203,6 @@ }; soc { - tcon0: lcd-controller@1c0c000 { - compatible = "allwinner,sun8i-a33-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_LCD>, - <&ccu CLK_LCD_CH0>; - clock-names = "ahb", - "tcon-ch0"; - clock-output-names = "tcon-pixel-clock"; - resets = <&ccu RST_BUS_LCD>; - reset-names = "lcd"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_drc0: endpoint@0 { - reg = <0>; - remote-endpoint = <&drc0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_dsi: endpoint@1 { - reg = <1>; - remote-endpoint = <&dsi_in_tcon0>; - }; - }; - }; - }; - video-codec@1c0e000 { compatible = "allwinner,sun8i-a33-video-engine"; reg = <0x01c0e000 0x1000>; @@ -312,19 +265,12 @@ phys = <&dphy>; phy-names = "dphy"; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - dsi_in_tcon0: endpoint { - remote-endpoint = <&tcon0_out_dsi>; - }; + port { + dsi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi>; }; }; }; @@ -339,115 +285,6 @@ status = "disabled"; #phy-cells = <0>; }; - - fe0: display-frontend@1e00000 { - compatible = "allwinner,sun8i-a33-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>, - <&ccu CLK_DRAM_DE_FE>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_BUS_DE_FE>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; - }; - - be0: display-backend@1e60000 { - compatible = "allwinner,sun8i-a33-display-backend"; - reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; - reg-names = "be", "sat"; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, - <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; - clock-names = "ahb", "mod", - "ram", "sat"; - resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; - reset-names = "be", "sat"; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_drc0: endpoint@0 { - reg = <0>; - remote-endpoint = <&drc0_in_be0>; - }; - }; - }; - }; - - drc0: drc@1e70000 { - compatible = "allwinner,sun8i-a33-drc"; - reg = <0x01e70000 0x10000>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>, - <&ccu CLK_DRAM_DRC>; - clock-names = "ahb", "mod", "ram"; - resets = <&ccu RST_BUS_DRC>; - - assigned-clocks = <&ccu CLK_DRC>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - drc0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_drc0>; - }; - }; - - drc0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - drc0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_drc0>; - }; - }; - }; - }; }; thermal-zones { @@ -524,10 +361,37 @@ }; }; +&be0 { + compatible = "allwinner,sun8i-a33-display-backend"; + /* A33 has an extra "SAT" module packed inside the display backend */ + reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; + reg-names = "be", "sat"; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; + clock-names = "ahb", "mod", + "ram", "sat"; + resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; + reset-names = "be", "sat"; + assigned-clocks = <&ccu CLK_DE_BE>; + assigned-clock-rates = <300000000>; +}; + &ccu { compatible = "allwinner,sun8i-a33-ccu"; }; +&de { + compatible = "allwinner,sun8i-a33-display-engine"; +}; + +&drc0 { + compatible = "allwinner,sun8i-a33-drc"; +}; + +&fe0 { + compatible = "allwinner,sun8i-a33-display-frontend"; +}; + &mali { operating-points-v2 = <&mali_opp_table>; }; @@ -544,6 +408,20 @@ }; +&tcon0 { + compatible = "allwinner,sun8i-a33-tcon"; +}; + +&tcon0_out { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_tcon0>; + }; +}; + &usb_otg { compatible = "allwinner,sun8i-a33-musb"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 1c012a4def16..9c006fc18821 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -154,6 +154,10 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 7d30d3e530fb..9d34eabba121 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -237,6 +237,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; @@ -381,7 +389,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index a5a9f5a0603e..ea299d3d84d0 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -247,6 +247,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; @@ -412,7 +420,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 98e8cea26dbe..66d078053d5f 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -46,6 +46,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/input/input.h> / { model = "TBS A711 Tablet"; @@ -98,6 +99,13 @@ }; }; + reg_gps: reg-gps { + compatible = "regulator-fixed"; + regulator-name = "gps"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + reg_vbat: reg-vbat { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -156,6 +164,18 @@ status = "okay"; }; +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&pio>; + interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */ + }; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; pinctrl-names = "default"; @@ -200,6 +220,25 @@ status = "okay"; }; +&r_lradc { + vref-supply = <®_aldo2>; + status = "okay"; + + button@210 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <210000>; + }; + + button@410 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <410000>; + }; +}; + &r_rsb { status = "okay"; @@ -391,8 +430,7 @@ }; &tcon0_out { - tcon0_out_lcd: endpoint@0 { - reg = <0>; + tcon0_out_lcd: endpoint { remote-endpoint = <&panel_input>; }; }; @@ -407,7 +445,34 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm20702a1"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vbat>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + max-speed = <1500000>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pb_pins>; status = "okay"; + + gnss { + compatible = "u-blox,neo-6m"; + + v-bckp-supply = <®_rtc_ldo>; + vcc-supply = <®_gps>; + current-speed = <9600>; + }; }; &usb_otg { @@ -418,7 +483,7 @@ &usbphy { usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ usb0_vbus-supply = <®_drivevbus>; - usb1_vbus_supply = <®_vmain>; - usb2_vbus_supply = <®_vmain>; + usb1_vbus-supply = <®_vmain>; + usb2_vbus-supply = <®_vmain>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index b099d2fbb5cd..392b0cabbf0d 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -61,79 +61,91 @@ #size-cells = <0>; cpu0: cpu@0 { - clocks = <&ccu CLK_C0CPUX>; - clock-names = "cpu"; compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0>; + #cooling-cells = <2>; }; cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <1>; + #cooling-cells = <2>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <2>; + #cooling-cells = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <3>; + #cooling-cells = <2>; }; cpu100: cpu@100 { - clocks = <&ccu CLK_C1CPUX>; - clock-names = "cpu"; compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x100>; + #cooling-cells = <2>; }; cpu@101 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x101>; + #cooling-cells = <2>; }; cpu@102 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x102>; + #cooling-cells = <2>; }; cpu@103 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x103>; + #cooling-cells = <2>; }; }; @@ -333,6 +345,11 @@ reg = <0>; remote-endpoint = <&tcon0_in_mixer0>; }; + + mixer0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_mixer0>; + }; }; }; }; @@ -351,9 +368,17 @@ #size-cells = <0>; mixer1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; - mixer1_out_tcon1: endpoint { + mixer1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer1>; + }; + + mixer1_out_tcon1: endpoint@1 { + reg = <1>; remote-endpoint = <&tcon1_in_mixer1>; }; }; @@ -420,6 +445,7 @@ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; @@ -436,11 +462,14 @@ reg = <0>; remote-endpoint = <&mixer0_out_tcon0>; }; + + tcon0_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon0>; + }; }; tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -460,9 +489,17 @@ #size-cells = <0>; tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; reg = <0>; - tcon1_in_mixer1: endpoint { + tcon1_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon1>; + }; + + tcon1_in_mixer1: endpoint@1 { + reg = <1>; remote-endpoint = <&mixer1_out_tcon1>; }; }; @@ -557,6 +594,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -594,7 +632,6 @@ clocks = <&ccu CLK_BUS_EHCI0>; resets = <&ccu RST_BUS_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -606,7 +643,6 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -618,7 +654,6 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -671,6 +706,12 @@ function = "i2c1"; }; + /omit-if-no-ref/ + i2c2_pe_pins: i2c2-pe-pins { + pins = "PE14", "PE15"; + function = "i2c2"; + }; + i2c2_ph_pins: i2c2-ph-pins { pins = "PH4", "PH5"; function = "i2c2"; @@ -742,6 +783,12 @@ pins = "PG8", "PG9"; function = "uart1"; }; + + /omit-if-no-ref/ + uart2_pb_pins: uart2-pb-pins { + pins = "PB0", "PB1"; + function = "uart2"; + }; }; timer@1c20c00 { @@ -847,6 +894,39 @@ status = "disabled"; }; + uart2: serial@1c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@1c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@1c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun8i-a83t-i2c", "allwinner,sun6i-a31-i2c"; @@ -907,7 +987,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -998,6 +1078,13 @@ status = "disabled"; }; + r_lradc: lradc@1f03c00 { + compatible = "allwinner,sun8i-a83t-r-lradc"; + reg = <0x01f03c00 0x100>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 1db2541135a7..78a37a47185a 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -28,7 +28,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; pwr_led { label = "bananapi-m2-zero:red:pwr"; @@ -39,7 +38,6 @@ gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; sw4 { label = "power"; @@ -67,8 +65,9 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -115,14 +114,27 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + }; + }; &usb_otg { diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 84cd9c061227..4970eda2877e 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -178,7 +178,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 25540b7694d5..6277f13f3eb3 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -142,7 +142,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -193,13 +193,13 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts index 2c952eacfef5..ff0a7a952e0c 100644 --- a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts +++ b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts @@ -84,15 +84,14 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; @@ -120,7 +119,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts index 65cba1050802..4ba533b0340f 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts @@ -64,9 +64,23 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; }; &ehci1 { @@ -94,9 +108,19 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts index 9412668bb888..69243dcb30a6 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts @@ -93,7 +93,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts index 6246d3eff39d..07867a0d569b 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts @@ -105,7 +105,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index f110ee382239..4df29a65316d 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -59,8 +59,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_npi>, <&leds_r_npi>; status { label = "nanopi:blue:status"; @@ -78,8 +76,6 @@ r_gpio_keys { compatible = "gpio-keys"; input-name = "k1"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_npi>; k1 { label = "k1"; @@ -104,28 +100,9 @@ status = "okay"; }; -&pio { - leds_npi: led_pins { - pins = "PA10"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_npi: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_npi: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index f1fc6bdca8be..597c425d08ec 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -75,8 +75,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; status_led { label = "orangepi:red:status"; @@ -92,8 +90,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw2 { label = "sw2"; @@ -110,8 +106,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_pwrseq_pin_orangepi>; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */ }; }; @@ -152,7 +146,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -179,30 +173,6 @@ }; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3", "PL4"; - function = "gpio_in"; - }; - - wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin { - pins = "PL7"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -210,7 +180,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts index 476ae8e387ca..6f9c97add54e 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; pwr_led { label = "orangepi:green:pwr"; @@ -91,8 +89,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw4 { label = "sw4"; @@ -126,7 +122,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -160,28 +156,9 @@ status = "okay"; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 245fd658defb..840849169bed 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -73,8 +73,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; pwr_led { label = "orangepi:green:pwr"; @@ -90,8 +88,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw4 { label = "sw4"; @@ -166,25 +162,6 @@ status = "okay"; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - ®_usb0_vbus { gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ status = "okay"; @@ -192,7 +169,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 46240334128f..5aff8ecc66cb 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -73,8 +73,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; pwr_led { label = "orangepi:green:pwr"; @@ -90,8 +88,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw4 { label = "sw4"; @@ -152,7 +148,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -179,13 +175,6 @@ status = "okay"; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - &r_i2c { status = "okay"; @@ -210,18 +199,6 @@ }; }; -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - ®_usb0_vbus { gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ status = "okay"; @@ -229,7 +206,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index ac8438c2cff1..97f497854e05 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -63,8 +63,6 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_pin_a>; regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -116,13 +114,6 @@ bias-pull-up; }; -&pio { - usb3_vbus_pin_a: usb3_vbus_pin { - pins = "PG11"; - function = "gpio_out"; - }; -}; - &r_i2c { status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts index c834048c325e..b8f46e2802fd 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts @@ -79,7 +79,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ post-power-on-delay-ms = <200>; }; @@ -135,6 +134,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts b/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts new file mode 100644 index 000000000000..4738f3a9efe4 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Bootlin + * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "RerVision H3-DVK"; + compatible = "rervision,h3-dvk", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 959d265e7254..e37c30e811d3 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -231,3 +231,7 @@ &rtc { compatible = "allwinner,sun8i-h3-rtc"; }; + +&sid { + compatible = "allwinner,sun8i-h3-sid"; +}; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 719ad769b837..3d9a1524e17e 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -49,6 +49,19 @@ ethernet0 = &sdio_wifi; }; + panel: panel { + /* Tablet dts should provide panel compatible */ + backlight = <&backlight>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_dc1sw>; + + port { + panel_input: endpoint { + remote-endpoint = <&tcon0_out_lcd>; + }; + }; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; /* @@ -64,6 +77,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -90,6 +107,12 @@ }; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; +}; + &usbphy { usb1_vbus-supply = <®_dldo1>; }; diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts index 32cf1ab33aab..246dec5846a4 100644 --- a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts +++ b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts @@ -34,8 +34,6 @@ /* 2Gb Macronix MX30LF2G18AC (3V) */ nand@0 { - #address-cells = <1>; - #size-cells = <1>; reg = <0>; allwinner,rb = <0>; nand-ecc-mode = "hw"; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts index 316998e9ec5d..4f48eec6b2ef 100644 --- a/arch/arm/boot/dts/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -158,14 +158,6 @@ status = "okay"; }; -&pio { - usb0_id_det: usb0-id-detect-pin { - pins = "PD10"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_rsb { status = "okay"; @@ -314,10 +306,8 @@ &usbphy { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_det>; usb0_vbus-supply = <®_drivevbus>; - usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */ + usb0_id_det-gpios = <&pio 3 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD10 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_usb1_vbus>; }; diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 438b7b44dab3..c488aaacbd68 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -102,6 +102,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + clocks = <&ccu CLK_OUTA>; + clock-names = "ext_clock"; }; }; @@ -196,6 +198,11 @@ status = "okay"; }; +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&clk_out_a_pin>; +}; + ®_aldo2 { regulator-always-on; regulator-min-microvolt = <2500000>; @@ -250,12 +257,27 @@ regulator-name = "vcc-wifi-io"; }; +/* + * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same + * time, with the two being in sync, to be able to meet maximum power + * consumption during transmits. Since this is not really supported + * right now, just use the two as always on, and we will fix it later. + */ + ®_dldo2 { + regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; +}; + ®_dldo4 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; @@ -278,6 +300,25 @@ status = "okay"; }; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&ccu CLK_OUTA>; + clock-names = "lpo"; + vbat-supply = <®_dldo2>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + /* TODO host wake line connected to PMIC GPIO pins */ + shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ + max-speed = <1500000>; + }; +}; + &usbphy { usb1_vbus-supply = <®_vcc5v0>; usb2_vbus-supply = <®_vcc5v0>; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 89762dbefe42..bb856e53b806 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -273,7 +273,6 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -285,7 +284,6 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -296,7 +294,6 @@ clocks = <&ccu CLK_BUS_EHCI2>; resets = <&ccu RST_BUS_EHCI2>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -308,7 +305,6 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -342,6 +338,11 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + clk_out_a_pin: clk-out-a-pin { + pins = "PI12"; + function = "clk_out_a"; + }; + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", @@ -389,6 +390,16 @@ pins = "PB22", "PB23"; function = "uart0"; }; + + uart3_pg_pins: uart3-pg-pins { + pins = "PG6", "PG7"; + function = "uart3"; + }; + + uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins { + pins = "PG8", "PG9"; + function = "uart3"; + }; }; wdt: watchdog@1c20c90 { @@ -547,9 +558,7 @@ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; resets = <&ccu RST_BUS_SATA>; - resets-name = "ahci"; - #address-cells = <1>; - #size-cells = <0>; + reset-names = "ahci"; status = "disabled"; }; @@ -599,12 +608,9 @@ #size-cells = <0>; tcon_top_mixer0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon_top_mixer0_in_mixer0: endpoint@0 { - reg = <0>; + tcon_top_mixer0_in_mixer0: endpoint { remote-endpoint = <&mixer0_out_tcon_top>; }; }; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 189e479eb95a..b3d8b8f056cd 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -86,14 +86,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH8"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_rsb { status = "okay"; @@ -224,9 +216,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + usb0_id_det-gpios = <&pio 7 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH8 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts index 99c8cf7bb86c..2e4587d26ce5 100644 --- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts @@ -96,6 +96,6 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 21e1806ca509..df72b1719c34 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -129,12 +129,9 @@ #size-cells = <0>; mixer0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - mixer0_out_tcon0: endpoint@0 { - reg = <0>; + mixer0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_mixer0>; }; }; @@ -150,6 +147,7 @@ clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>; reset-names = "lcd"; status = "disabled"; @@ -159,12 +157,9 @@ #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_mixer0: endpoint@0 { - reg = <0>; + tcon0_in_mixer0: endpoint { remote-endpoint = <&mixer0_out_tcon0>; }; }; @@ -419,7 +414,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x1000>, <0x01c84000 0x2000>, diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts index bf97f6244c23..f05cabd34b8e 100644 --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -105,6 +105,24 @@ #include "axp22x.dtsi" +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pg_pins>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + ®_aldo3 { regulator-always-on; regulator-min-microvolt = <2700000>; @@ -152,24 +170,6 @@ regulator-name = "vcc-wifi"; }; -&mmc0 { - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ - status = "okay"; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pg_pins>; - vmmc-supply = <®_dldo2>; - vqmmc-supply = <®_dldo1>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; -}; - &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 85da85faf869..18156ffa3ce9 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -89,31 +89,23 @@ vga-dac { compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac"; vdd-supply = <®_dcdc1>; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - vga_dac_in: endpoint@0 { - reg = <0>; + vga_dac_in: endpoint { remote-endpoint = <&tcon0_out_vga>; }; }; port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - vga_dac_out: endpoint@0 { - reg = <0>; + vga_dac_out: endpoint { remote-endpoint = <&vga_con_in>; }; }; @@ -133,6 +125,19 @@ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_cldo1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; @@ -183,10 +188,26 @@ clocks = <&ac100_rtc 0>; }; +&pio { + vcc-pa-supply = <®_ldo_io1>; + vcc-pb-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dc1sw>; + vcc-pe-supply = <®_eldo2>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_ldo_io0>; + vcc-ph-supply = <®_dcdc1>; +}; + &r_ir { status = "okay"; }; +&r_pio { + vcc-pl-supply = <®_dldo2>; + vcc-pm-supply = <®_eldo3>; +}; + &r_rsb { status = "okay"; @@ -217,6 +238,10 @@ /* unused */ }; + reg_dc1sw: dc1sw { + regulator-name = "vcc-pd"; + }; + reg_dc5ldo: dc5ldo { regulator-always-on; regulator-min-microvolt = <800000>; @@ -271,7 +296,6 @@ }; reg_dldo2: dldo2 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pl"; @@ -290,14 +314,12 @@ }; reg_eldo3: eldo3 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pm-codec-io1"; }; reg_ldo_io0: ldo_io0 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pg"; @@ -385,6 +407,14 @@ */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * The PHY requires 20ms after all voltages + * are applied until core logic is ready and + * 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC + * ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; regulator-name = "vcc-gmac-phy"; }; @@ -464,8 +494,7 @@ }; &tcon0_out { - tcon0_out_vga: endpoint@0 { - reg = <0>; + tcon0_out_vga: endpoint { remote-endpoint = <&vga_dac_in>; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 58a199b0e494..2ed28d9e2787 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -82,7 +82,7 @@ reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; + regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; @@ -91,7 +91,7 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; + regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; @@ -120,6 +120,19 @@ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_cldo1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -172,10 +185,26 @@ clocks = <&ac100_rtc 0>; }; +&pio { + vcc-pa-supply = <®_ldo_io1>; + vcc-pb-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_eldo2>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_ldo_io0>; + vcc-ph-supply = <®_dcdc1>; +}; + &r_ir { status = "okay"; }; +&r_pio { + vcc-pl-supply = <®_dldo2>; + vcc-pm-supply = <®_eldo3>; +}; + &r_rsb { status = "okay"; @@ -213,6 +242,10 @@ regulator-name = "vdd-cpus-09-usbh"; }; + dc1sw { + /* unused */ + }; + reg_dcdc1: dcdc1 { regulator-always-on; regulator-min-microvolt = <3000000>; @@ -260,7 +293,6 @@ }; reg_dldo2: dldo2 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pl"; @@ -279,14 +311,12 @@ }; reg_eldo3: eldo3 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pm-codec-io1"; }; reg_ldo_io0: ldo_io0 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pg"; @@ -374,6 +404,14 @@ */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * The PHY requires 20ms after all voltages + * are applied until core logic is ready and + * 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC + * ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; regulator-name = "vcc-gmac-phy"; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index d9532fb1ef65..0c1eec9000e3 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -56,6 +56,10 @@ #size-cells = <2>; interrupt-parent = <&gic>; + aliases { + ethernet0 = &gmac; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -183,6 +187,37 @@ clock-output-names = "osc32k"; }; + /* + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. + */ + mii_phy_tx_clk: mii_phy_tx_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "mii_phy_tx"; + }; + + gmac_int_tx_clk: gmac_int_tx_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_int_tx"; + }; + + gmac_tx_clk: clk@800030 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-gmac-clk"; + reg = <0x00800030 0x4>; + clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; + clock-output-names = "gmac_tx"; + }; + cpus_clk: clk@8001410 { compatible = "allwinner,sun9i-a80-cpus-clk"; reg = <0x08001410 0x4>; @@ -254,7 +289,7 @@ status = "disabled"; }; - soc { + soc@20000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -283,6 +318,23 @@ }; }; + gmac: ethernet@830000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x00830000 0x1054>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + resets = <&ccu RST_BUS_GMAC>; + reset-names = "stmmaceth"; + snps,pbl = <2>; + snps,fixed-burst; + snps,force_sf_dma_mode; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ehci0: usb@a00000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a00000 0x100>; @@ -290,7 +342,6 @@ clocks = <&usb_clocks CLK_BUS_HCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; - phy-names = "usb"; status = "disabled"; }; @@ -302,7 +353,6 @@ <&usb_clocks CLK_USB_OHCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; - phy-names = "usb"; status = "disabled"; }; @@ -324,7 +374,6 @@ clocks = <&usb_clocks CLK_BUS_HCI1>; resets = <&usb_clocks RST_USB1_HCI>; phys = <&usbphy2>; - phy-names = "usb"; status = "disabled"; }; @@ -354,7 +403,6 @@ clocks = <&usb_clocks CLK_BUS_HCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; - phy-names = "usb"; status = "disabled"; }; @@ -366,7 +414,6 @@ <&usb_clocks CLK_USB_OHCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; - phy-names = "usb"; status = "disabled"; }; @@ -475,7 +522,7 @@ }; gic: interrupt-controller@1c41000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c41000 0x1000>, <0x01c42000 0x2000>, <0x01c44000 0x2000>, @@ -544,12 +591,9 @@ #size-cells = <0>; fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe0_out_deu0: endpoint@0 { - reg = <0>; + fe0_out_deu0: endpoint { remote-endpoint = <&deu0_in_fe0>; }; }; @@ -571,12 +615,9 @@ #size-cells = <0>; fe1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe1_out_deu1: endpoint@0 { - reg = <0>; + fe1_out_deu1: endpoint { remote-endpoint = <&deu1_in_fe1>; }; }; @@ -614,12 +655,9 @@ }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_drc0: endpoint@0 { - reg = <0>; + be0_out_drc0: endpoint { remote-endpoint = <&drc0_in_be0>; }; }; @@ -657,12 +695,9 @@ }; be1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be1_out_drc1: endpoint@0 { - reg = <0>; + be1_out_drc1: endpoint { remote-endpoint = <&drc1_in_be1>; }; }; @@ -686,12 +721,9 @@ #size-cells = <0>; deu0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - deu0_in_fe0: endpoint@0 { - reg = <0>; + deu0_in_fe0: endpoint { remote-endpoint = <&fe0_out_deu0>; }; }; @@ -731,12 +763,9 @@ #size-cells = <0>; deu1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - deu1_in_fe1: endpoint@0 { - reg = <0>; + deu1_in_fe1: endpoint { remote-endpoint = <&fe1_out_deu1>; }; }; @@ -776,23 +805,17 @@ #size-cells = <0>; drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc0_in_be0: endpoint@0 { - reg = <0>; + drc0_in_be0: endpoint { remote-endpoint = <&be0_out_drc0>; }; }; drc0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - drc0_out_tcon0: endpoint@0 { - reg = <0>; + drc0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_drc0>; }; }; @@ -816,23 +839,17 @@ #size-cells = <0>; drc1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc1_in_be1: endpoint@0 { - reg = <0>; + drc1_in_be1: endpoint { remote-endpoint = <&be1_out_drc1>; }; }; drc1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - drc1_out_tcon1: endpoint@0 { - reg = <0>; + drc1_out_tcon1: endpoint { remote-endpoint = <&tcon1_in_drc1>; }; }; @@ -848,25 +865,21 @@ resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>; reset-names = "lcd", "edp"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_drc0: endpoint@0 { - reg = <0>; + tcon0_in_drc0: endpoint { remote-endpoint = <&drc0_out_tcon0>; }; }; tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -886,19 +899,14 @@ #size-cells = <0>; tcon1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon1_in_drc1: endpoint@0 { - reg = <0>; + tcon1_in_drc1: endpoint { remote-endpoint = <&drc1_out_tcon1>; }; }; tcon1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -945,9 +953,20 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #size-cells = <0>; #gpio-cells = <3>; + gmac_rgmii_pins: gmac-rgmii-pins { + pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", + "PA7", "PA8", "PA9", "PA10", "PA12", + "PA13", "PA15", "PA16", "PA17"; + function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + drive-strength = <40>; + }; + i2c3_pins: i2c3-pins { pins = "PG10", "PG11"; function = "i2c3"; diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi index b3283aeb5b7d..39263e74fbb5 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi @@ -69,7 +69,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; pwr_led { label = "bananapi-m2-plus:red:pwr"; @@ -80,7 +79,6 @@ gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; sw4 { label = "power"; @@ -101,8 +99,9 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -151,7 +150,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -208,14 +207,26 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - status = "okay"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + }; }; &usb_otg { diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index a4c757c0b741..84977d4eb97a 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -227,6 +227,11 @@ #size-cells = <0>; }; + sid: eeprom@1c14000 { + /* compatible is in per SoC .dtsi file */ + reg = <0x1c14000 0x400>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x400>; @@ -237,6 +242,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -298,7 +304,6 @@ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -310,7 +315,6 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -321,7 +325,6 @@ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -333,7 +336,6 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -344,7 +346,6 @@ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; - phy-names = "usb"; status = "disabled"; }; @@ -356,7 +357,6 @@ <&ccu CLK_USB_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; - phy-names = "usb"; status = "disabled"; }; @@ -381,14 +381,14 @@ interrupt-controller; #interrupt-cells = <3>; - csi_pins: csi { + csi_pins: csi-pins { pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11"; function = "csi"; }; - emac_rgmii_pins: emac0 { + emac_rgmii_pins: emac-rgmii-pins { pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD7", "PD8", "PD9", "PD10", "PD12", "PD13", "PD15", "PD16", "PD17"; @@ -396,22 +396,22 @@ drive-strength = <40>; }; - i2c0_pins: i2c0 { + i2c0_pins: i2c0-pins { pins = "PA11", "PA12"; function = "i2c0"; }; - i2c1_pins: i2c1 { + i2c1_pins: i2c1-pins { pins = "PA18", "PA19"; function = "i2c1"; }; - i2c2_pins: i2c2 { + i2c2_pins: i2c2-pins { pins = "PE12", "PE13"; function = "i2c2"; }; - mmc0_pins: mmc0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -419,7 +419,7 @@ bias-pull-up; }; - mmc1_pins: mmc1 { + mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -427,7 +427,7 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2_8bit { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", @@ -437,47 +437,47 @@ bias-pull-up; }; - spdif_tx_pins_a: spdif { + spdif_tx_pin: spdif-tx-pin { pins = "PA17"; function = "spdif"; }; - spi0_pins: spi0 { + spi0_pins: spi0-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; }; - spi1_pins: spi1 { + spi1_pins: spi1-pins { pins = "PA15", "PA16", "PA14", "PA13"; function = "spi1"; }; - uart0_pins_a: uart0 { + uart0_pa_pins: uart0-pa-pins { pins = "PA4", "PA5"; function = "uart0"; }; - uart1_pins: uart1 { + uart1_pins: uart1-pins { pins = "PG6", "PG7"; function = "uart1"; }; - uart1_rts_cts_pins: uart1_rts_cts { + uart1_rts_cts_pins: uart1-rts-cts-pins { pins = "PG8", "PG9"; function = "uart1"; }; - uart2_pins: uart2 { + uart2_pins: uart2-pins { pins = "PA0", "PA1"; function = "uart2"; }; - uart3_pins: uart3 { + uart3_pins: uart3-pins { pins = "PA13", "PA14"; function = "uart3"; }; - uart3_rts_cts_pins: uart3_rts_cts { + uart3_rts_cts_pins: uart3-rts-cts-pins { pins = "PA15", "PA16"; function = "uart3"; }; @@ -740,8 +740,7 @@ }; csi: camera@1cb0000 { - compatible = "allwinner,sun8i-h3-csi", - "allwinner,sun6i-a31-csi"; + compatible = "allwinner,sun8i-h3-csi"; reg = <0x01cb0000 0x1000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_CSI>, @@ -856,12 +855,12 @@ interrupt-controller; #interrupt-cells = <3>; - ir_pins_a: ir { + r_ir_rx_pin: r-ir-rx-pin { pins = "PL11"; function = "s_cir_rx"; }; - r_i2c_pins: r-i2c { + r_i2c_pins: r-i2c-pins { pins = "PL0", "PL1"; function = "s_i2c"; }; diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi index 1eadc132390c..19b3b23cfaa8 100644 --- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi +++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi @@ -167,7 +167,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -205,7 +205,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 1788556b4977..97a5c3504bbe 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1087,7 +1087,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { - compatible = "winbond,w25q32dw"; + compatible = "winbond,w25q32dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; }; diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi index ca2c3a557895..d18eaf4a4a3a 100644 --- a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi @@ -1,42 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Copyright 2016 Toradex AG + * Copyright 2016-2019 Toradex AG * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts index eaee10ef6512..ceb3f6388c7d 100644 --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Copyright 2016-2018 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2019 Toradex AG */ /dts-v1/; diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts index 7961eb4bd803..826b776fbe6f 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2016-2018 Toradex AG */ diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi index 367eb8c86098..0462ed2dd8b8 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2016-2018 Toradex AG */ @@ -17,6 +17,7 @@ pcie@1003000 { status = "okay"; + avddio-pex-supply = <®_1v05_vdd>; avdd-pex-pll-supply = <®_1v05_vdd>; avdd-pll-erefe-supply = <®_1v05_avdd>; @@ -1796,6 +1797,7 @@ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; + avddio-pex-supply = <®_1v05_vdd>; avdd-pll-erefe-supply = <®_1v05_avdd>; avdd-pll-utmip-supply = <®_1v8_vddio>; @@ -1807,6 +1809,11 @@ }; padctl@7009f000 { + avdd-pll-utmip-supply = <®_1v8_vddio>; + avdd-pll-erefe-supply = <®_1v05_avdd>; + avdd-pex-pll-supply = <®_1v05_vdd>; + hvdd-pex-pll-e-supply = <®_module_3v3>; + pads { usb2 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 13c93cd507d8..d1e8593ef0d9 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Copyright 2016-2018 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2019 Toradex AG */ #include "tegra124.dtsi" @@ -1837,6 +1801,11 @@ }; padctl@7009f000 { + avdd-pll-utmip-supply = <®_1v8_vddio>; + avdd-pll-erefe-supply = <®_1v05_avdd>; + avdd-pex-pll-supply = <®_1v05_vdd>; + hvdd-pex-pll-e-supply = <®_module_3v3>; + pads { usb2 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 9151b3ebb839..d5fd642f8b77 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1656,7 +1656,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { - compatible = "winbond,w25q32dw"; + compatible = "winbond,w25q32dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; }; @@ -1721,6 +1721,11 @@ padctl@7009f000 { status = "okay"; + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + pads { usb2 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index bc85b6a166c7..3b10f475037f 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -370,7 +370,7 @@ spi-max-frequency = <25000000>; flash@0 { - compatible = "winbond,w25q32dw"; + compatible = "winbond,w25q32dw", "jedec,spi-nor"; spi-max-frequency = <25000000>; reg = <0>; }; @@ -414,6 +414,11 @@ padctl@7009f000 { status = "okay"; + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + pads { usb2 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 82d139648ef1..5d5e6e18bc7b 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -879,7 +879,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { - compatible = "winbond,w25q32dw"; + compatible = "winbond,w25q32dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; }; @@ -921,6 +921,11 @@ }; padctl@7009f000 { + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + pads { usb2 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 9eb26dc15f6b..3e5ac096d85e 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -287,7 +287,7 @@ status = "okay"; spi-max-frequency = <48000000>; spi-flash@0 { - compatible = "winbond,w25q80bl"; + compatible = "winbond,w25q80bl", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <48000000>; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index dcad6d6128cf..8c942e60703e 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -616,17 +616,14 @@ }; mc: memory-controller@7000f000 { - compatible = "nvidia,tegra20-mc"; - reg = <0x7000f000 0x024 - 0x7000f03c 0x3c4>; + compatible = "nvidia,tegra20-mc-gart"; + reg = <0x7000f000 0x400 /* controller registers */ + 0x58000000 0x02000000>; /* GART aperture */ + clocks = <&tegra_car TEGRA20_CLK_MC>; + clock-names = "mc"; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; - }; - - iommu@7000f024 { - compatible = "nvidia,tegra20-gart"; - reg = <0x7000f024 0x00000018 /* controller registers */ - 0x58000000 0x02000000>; /* GART aperture */ + #iommu-cells = <0>; }; memory-controller@7000f400 { diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index b0d40ac8ac6e..a3b0f3555cd2 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1886,7 +1886,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@1 { - compatible = "winbond,w25q32"; + compatible = "winbond,w25q32", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <20000000>; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index fb9222b479d2..7ce61edd52f5 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -360,7 +360,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@1 { - compatible = "winbond,w25q32"; + compatible = "winbond,w25q32", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <20000000>; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index d2b553f76719..e074258d4518 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -370,6 +370,17 @@ reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */ }; + actmon@6000c800 { + compatible = "nvidia,tegra30-actmon"; + reg = <0x6000c800 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_ACTMON>, + <&tegra_car TEGRA30_CLK_EMC>; + clock-names = "actmon", "emc"; + resets = <&tegra_car TEGRA30_CLK_ACTMON>; + reset-names = "actmon"; + }; + gpio: gpio@6000d000 { compatible = "nvidia,tegra30-gpio"; reg = <0x6000d000 0x1000>; diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts index dabe232216b4..ef6d586ce887 100644 --- a/arch/arm/boot/dts/tny_a9260.dts +++ b/arch/arm/boot/dts/tny_a9260.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ /dts-v1/; #include "at91sam9260.dtsi" diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi index 8e3cf5109f98..dd6957b20772 100644 --- a/arch/arm/boot/dts/tny_a9260_common.dtsi +++ b/arch/arm/boot/dts/tny_a9260_common.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ / { diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index 7b403db4cd34..2820635952e3 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * usb_a9263.dts - Device Tree file for Caloa USB A9293 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2 only */ /dts-v1/; #include "at91sam9263.dtsi" diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts index 8456d70bb42b..118d766a1265 100644 --- a/arch/arm/boot/dts/tny_a9g20.dts +++ b/arch/arm/boot/dts/tny_a9g20.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ /dts-v1/; #include "at91sam9g20.dtsi" diff --git a/arch/arm/boot/dts/tps6507x.dtsi b/arch/arm/boot/dts/tps6507x.dtsi index 4c326e591e5a..db4809d308f9 100644 --- a/arch/arm/boot/dts/tps6507x.dtsi +++ b/arch/arm/boot/dts/tps6507x.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi index 399baaa0a2ab..0d463de5650f 100644 --- a/arch/arm/boot/dts/tps65217.dtsi +++ b/arch/arm/boot/dts/tps65217.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/tps65910.dtsi b/arch/arm/boot/dts/tps65910.dtsi index b0ac6657a170..a941d1e62328 100644 --- a/arch/arm/boot/dts/tps65910.dtsi +++ b/arch/arm/boot/dts/tps65910.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 16533b62b0a2..93e07c18781b 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi index 5288e6dffef7..683419d5c0e5 100644 --- a/arch/arm/boot/dts/twl4030_omap3.dtsi +++ b/arch/arm/boot/dts/twl4030_omap3.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Linaro, Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &twl { diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index c45f97f37563..9d588cfaa5cb 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi index e373f59cea9c..fc498d0bde8b 100644 --- a/arch/arm/boot/dts/twl6030_omap4.dtsi +++ b/arch/arm/boot/dts/twl6030_omap4.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ &twl { diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts index de0c24f5210a..ec8cd86b260d 100644 --- a/arch/arm/boot/dts/usb_a9260.dts +++ b/arch/arm/boot/dts/usb_a9260.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * usb_a9260.dts - Device Tree file for Caloa USB A9260 board * * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9260.dtsi" diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index de3fa3ab34d6..8744b5f6f792 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * usb_a926x.dts - Device Tree file for Caloa USB A926x board * * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2 or later. */ / { diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 0a753b4c74e7..e7a705fddda9 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * usb_a9263.dts - Device Tree file for Caloa USB A9293 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2 only */ /dts-v1/; #include "at91sam9263.dtsi" diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi index 5b0ffc1a0b24..08d58081201a 100644 --- a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi +++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board * * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2. */ / { diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index ec77cf8f9695..2f667b083e81 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board * * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "usb_a9g20_common.dtsi" diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi index 81c3fe0465d9..adbe75024739 100644 --- a/arch/arm/boot/dts/usb_a9g20_common.dtsi +++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board * * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2 or later. */ #include "at91sam9g20.dtsi" diff --git a/arch/arm/boot/dts/usb_a9g20_lpw.dts b/arch/arm/boot/dts/usb_a9g20_lpw.dts index f8cb1b9a01c5..f65712015d40 100644 --- a/arch/arm/boot/dts/usb_a9g20_lpw.dts +++ b/arch/arm/boot/dts/usb_a9g20_lpw.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board * * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; #include "usb_a9g20_common.dtsi" diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 6f4f60ba5429..269e6bf99ccb 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "skeleton.dtsi" / { model = "ARM Versatile AB"; @@ -21,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x0 0x08000000>; }; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index a9569d15de41..d3963e9eaf48 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -133,7 +133,7 @@ mmci@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; - interrupts = <9 10>; + interrupts = <9>, <10>; cd-gpios = <&v2m_mmc_gpios 0 0>; wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index fd42e1194179..798c97aff7fa 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -133,7 +133,7 @@ mmci@5000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x05000 0x1000>; - interrupts = <9 10>; + interrupts = <9>, <10>; cd-gpios = <&v2m_mmc_gpios 0 0>; wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index a2ccacd07f4f..00cd9f5bef2e 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -42,6 +42,7 @@ cci-control-port = <&cci_control1>; cpu-idle-states = <&CLUSTER_SLEEP_BIG>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <990>; }; cpu1: cpu@1 { @@ -51,6 +52,7 @@ cci-control-port = <&cci_control1>; cpu-idle-states = <&CLUSTER_SLEEP_BIG>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <990>; }; cpu2: cpu@2 { @@ -60,6 +62,7 @@ cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; capacity-dmips-mhz = <516>; + dynamic-power-coefficient = <133>; }; cpu3: cpu@3 { @@ -69,6 +72,7 @@ cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; capacity-dmips-mhz = <516>; + dynamic-power-coefficient = <133>; }; cpu4: cpu@4 { @@ -78,6 +82,7 @@ cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; capacity-dmips-mhz = <516>; + dynamic-power-coefficient = <133>; }; idle-states { diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts index b08d561d6748..3fa0cbe456db 100644 --- a/arch/arm/boot/dts/vf610-bk4.dts +++ b/arch/arm/boot/dts/vf610-bk4.dts @@ -60,6 +60,29 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + spi-gpio { + compatible = "spi-gpio"; + pinctrl-0 = <&pinctrl_gpio_spi>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + /* PTD12 ->RPIO[91] */ + sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + /* PTD10 ->RPIO[89] */ + miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + num-chipselects = <0>; + + gpio@0 { + compatible = "pisosr-gpio"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + /* PTB18 -> RGPIO[40] */ + load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + spi-max-frequency = <100000>; + }; + }; }; &adc0 { @@ -431,6 +454,14 @@ >; }; + pinctrl_gpio_spi: pinctrl-gpio-spi { + fsl,pins = < + VF610_PAD_PTB18__GPIO_40 0x1183 + VF610_PAD_PTD10__GPIO_89 0x1183 + VF610_PAD_PTD12__GPIO_91 0x1183 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < VF610_PAD_PTA22__I2C2_SCL 0x34df diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts index ea1b996a6bca..703f375d7e24 100644 --- a/arch/arm/boot/dts/vf610-cosmic.dts +++ b/arch/arm/boot/dts/vf610-cosmic.dts @@ -1,11 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Freescale Semiconductor, Inc. * Copyright 2013 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ /dts-v1/; diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/vf610-pinfunc.h index fcad7132c871..f1e5a7cf58a9 100644 --- a/arch/arm/boot/dts/vf610-pinfunc.h +++ b/arch/arm/boot/dts/vf610-pinfunc.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_VF610_PINFUNC_H diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index 7cdcc5fe8282..9466913693ac 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -29,35 +29,30 @@ label = "zii:green:debug1"; gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; - max-brightness = <1>; }; led-fail { label = "zii:red:fail"; gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; default-state = "off"; - max-brightness = <1>; }; led-status { label = "zii:green:status"; gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; default-state = "off"; - max-brightness = <1>; }; led-debug-a { label = "zii:green:debug_a"; gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; default-state = "off"; - max-brightness = <1>; }; led-debug-b { label = "zii:green:debug_b"; gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; default-state = "off"; - max-brightness = <1>; }; }; @@ -92,9 +87,14 @@ bus-num = <1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dspi1>; - status = "okay"; - - m25p128@0 { + /* + * Some CFU1s come with SPI-NOR chip DNPed, so we leave this + * node disabled by default and rely on bootloader to enable + * it when appropriate. + */ + status = "disabled"; + + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p128", "jedec,spi-nor"; @@ -207,12 +207,12 @@ }; &i2c0 { - clock-frequency = <100000>; + clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; - pca9554@22 { + io-expander@22 { compatible = "nxp,pca9554"; reg = <0x22>; gpio-controller; @@ -223,19 +223,23 @@ reg = <0x48>; }; - at24c04@52 { + eeprom@52 { compatible = "atmel,24c04"; reg = <0x52>; label = "nvm"; }; - at24c04@54 { + eeprom@54 { compatible = "atmel,24c04"; reg = <0x54>; label = "nameplate"; }; }; +&snvsrtc { + status = "disabled"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index bd79e00bf615..48086c5e8549 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -1,45 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2015, 2016 Zodiac Inflight Innovations - * - * Based on an original 'vf610-twr.dts' which is Copyright 2015, - * Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -334,11 +295,11 @@ gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH + cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW &gpio1 8 GPIO_ACTIVE_HIGH>; num-chipselects = <2>; - m25p128@0 { + flash@0 { compatible = "m25p128", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -367,7 +328,7 @@ pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; - gpio5: pca9554@20 { + gpio5: io-expander@20 { compatible = "nxp,pca9554"; reg = <0x20>; gpio-controller; @@ -375,7 +336,7 @@ }; - gpio6: pca9554@22 { + gpio6: io-expander@22 { compatible = "nxp,pca9554"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pca9554_22>; @@ -408,7 +369,7 @@ #size-cells = <0>; reg = <0>; - sfp1: at24c04@50 { + sfp1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; }; @@ -419,7 +380,7 @@ #size-cells = <0>; reg = <1>; - sfp2: at24c04@50 { + sfp2: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; }; @@ -430,7 +391,7 @@ #size-cells = <0>; reg = <2>; - sfp3: at24c04@50 { + sfp3: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; }; @@ -441,7 +402,7 @@ #size-cells = <0>; reg = <3>; - sfp4: at24c04@50 { + sfp4: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index 6f4a5602cefd..778e02c000d1 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -1,45 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2015, 2016 Zodiac Inflight Innovations - * - * Based on an original 'vf610-twr.dts' which is Copyright 2015, - * Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -277,7 +238,7 @@ status = "okay"; spi-num-chipselects = <2>; - m25p128@0 { + flash@0 { compatible = "m25p128", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -313,7 +274,7 @@ * P1 - WE2_CMD * P2 - WE2_CLK */ - gpio5: pca9557@18 { + gpio5: io-expander@18 { compatible = "nxp,pca9557"; reg = <0x18>; gpio-controller; @@ -361,7 +322,7 @@ * IO0 - WE1_CLK * IO1 - WE1_CMD */ - gpio7: pca9554@22 { + gpio7: io-expander@22 { compatible = "nxp,pca9554"; reg = <0x22>; gpio-controller; @@ -371,7 +332,7 @@ }; &i2c1 { - at24mac602@50 { + eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; read-only; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index 19eb4a849efb..0507e6dcbb21 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -138,7 +138,7 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; pinctrl-1 = <&pinctrl_i2c0_gpio>; - scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -147,12 +147,12 @@ reg = <0x48>; }; - at24c04@50 { + eeprom@50 { compatible = "atmel,24c04"; reg = <0x50>; }; - at24c04@52 { + eeprom@52 { compatible = "atmel,24c04"; reg = <0x52>; }; diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index de6dfa57bec5..d7019e89f588 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -505,14 +505,14 @@ pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; - gpio5: pca9554@20 { + gpio5: io-expander@20 { compatible = "nxp,pca9554"; reg = <0x20>; gpio-controller; #gpio-cells = <2>; }; - gpio6: pca9554@22 { + gpio6: io-expander@22 { compatible = "nxp,pca9554"; reg = <0x22>; gpio-controller; @@ -524,12 +524,12 @@ reg = <0x48>; }; - at24c04@50 { + eeprom@50 { compatible = "atmel,24c04"; reg = <0x50>; }; - at24c04@52 { + eeprom@52 { compatible = "atmel,24c04"; reg = <0x52>; }; @@ -577,7 +577,7 @@ reg = <0x4f>; }; - gpio7: pca9555@23 { + gpio7: io-expander@23 { compatible = "nxp,pca9555"; gpio-controller; #gpio-cells = <2>; @@ -671,6 +671,10 @@ }; }; +&snvsrtc { + status = "disabled"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts new file mode 100644 index 000000000000..9dde83ccb9d1 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Device tree file for ZII's SPB4 board + * + * SPB - Seat Power Box + * + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 SPB4 Board"; + compatible = "zii,vf610spb4", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + no-sdio; + no-sd; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + no-sdio; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; + reg = <0>; + eeprom-length = <65536>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_1"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_1000_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_1000_3"; + }; + + port@4 { + reg = <4>; + label = "eth_cu_1000_4"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_5"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_6"; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + io-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "nameplate"; + }; + + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&snvsrtc { + status = "disabled"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&wdoga5 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTE2__GPIO_107 0x31c2 + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA30__UART3_TX 0x21a2 + VF610_PAD_PTA31__UART3_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts new file mode 100644 index 000000000000..847c5858fea1 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts @@ -0,0 +1,314 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Device tree file for ZII's SSMB DTU board + * + * SSMB - SPU3 Switch Management Board + * DTU - Digital Tapping Unit + * + * Copyright (C) 2015-2019 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 SSMB DTU Board"; + compatible = "zii,vf610dtu", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vcc_3v3_mcu: regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; + reg = <0>; + eeprom-length = <65536>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "eth_cu_100_3"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_4"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_5"; + }; + + port@8 { + reg = <8>; + label = "eth_cu_1000_1"; + }; + + port@9 { + reg = <9>; + label = "eth_cu_1000_2"; + phy-handle = <&phy9>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + }; + + mdio1 { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + + phy9: phy9@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + pinctrl-0 = <&pinctrl_gpio_phy9>; + pinctrl-names = "default"; + interrupt-parent = <&gpio2>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio6: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* On SSMB */ + temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + /* On DSB */ + temperature-sensor@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "nameplate"; + }; + + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&snvsrtc { + status = "disabled"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_phy9: pinctrl-gpio-phy9 { + fsl,pins = < + VF610_PAD_PTB24__GPIO_94 0x219d + >; + }; + + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTE2__GPIO_107 0x31c2 + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index 757af56e8ee7..453fce80f858 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -37,7 +37,6 @@ label = "zii:green:debug1"; gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; - max-brightness = <1>; }; }; @@ -70,7 +69,7 @@ */ status = "disabled"; - m25p128@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p128", "jedec,spi-nor"; @@ -99,6 +98,8 @@ non-removable; no-1-8-v; keep-power-in-suspend; + no-sdio; + no-sd; status = "okay"; }; @@ -106,6 +107,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + no-sdio; status = "okay"; }; @@ -192,7 +194,7 @@ pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; - gpio6: pca9505@22 { + gpio6: io-expander@22 { compatible = "nxp,pca9554"; reg = <0x22>; gpio-controller; @@ -204,18 +206,22 @@ reg = <0x48>; }; - at24c04@50 { + eeprom@50 { compatible = "atmel,24c04"; reg = <0x50>; label = "nameplate"; }; - at24c04@52 { + eeprom@52 { compatible = "atmel,24c04"; reg = <0x52>; }; }; +&snvsrtc { + status = "disabled"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -247,6 +253,10 @@ }; }; +&wdoga5 { + status = "disabled"; +}; + &iomuxc { pinctrl_dspi1: dspi1grp { fsl,pins = < diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts index 87f33310e2bc..e9f55bd30bd4 100644 --- a/arch/arm/boot/dts/vt8500-bv07.dts +++ b/arch/arm/boot/dts/vt8500-bv07.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * vt8500-bv07.dts - Device tree file for Benign BV07 Netbook * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * Licensed under GPLv2 or later */ /dts-v1/; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi index 1929ad390d88..b7e09eff5bb2 100644 --- a/arch/arm/boot/dts/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -1,14 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * vt8500.dtsi - Device tree file for VIA VT8500 SoC * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "via,vt8500"; cpus { @@ -21,6 +20,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts index e3e6b9eb09d0..2d77c087676e 100644 --- a/arch/arm/boot/dts/wm8505-ref.dts +++ b/arch/arm/boot/dts/wm8505-ref.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * wm8505-ref.dts - Device tree file for Wondermedia WM8505 reference netbook * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * Licensed under GPLv2 or later */ /dts-v1/; diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index e9ef539e13d3..168cd12b07bc 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -1,14 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * wm8505.dtsi - Device tree file for Wondermedia WM8505 SoC * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "wm,wm8505"; cpus { @@ -21,6 +20,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts index dd0d1b602388..f6a42149a0a0 100644 --- a/arch/arm/boot/dts/wm8650-mid.dts +++ b/arch/arm/boot/dts/wm8650-mid.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * wm8650-mid.dts - Device tree file for Wondermedia WM8650-MID Tablet * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * Licensed under GPLv2 or later */ /dts-v1/; diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index e12213d16693..bc057b6f7d16 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -1,14 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "wm,wm8650"; cpus { @@ -21,6 +20,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/arch/arm/boot/dts/wm8750-apc8750.dts b/arch/arm/boot/dts/wm8750-apc8750.dts index 37e4a408bf39..136e812bc1e4 100644 --- a/arch/arm/boot/dts/wm8750-apc8750.dts +++ b/arch/arm/boot/dts/wm8750-apc8750.dts @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * wm8750-apc8750.dts * - Device tree file for VIA APC8750 * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * Licensed under GPLv2 or later */ /dts-v1/; diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi index 46d076d7302b..33aeb37491f4 100644 --- a/arch/arm/boot/dts/wm8750.dtsi +++ b/arch/arm/boot/dts/wm8750.dtsi @@ -1,14 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "wm,wm8750"; cpus { @@ -21,6 +20,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts index 7a563d2523b0..c7a6fe0ce48f 100644 --- a/arch/arm/boot/dts/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/wm8850-w70v2.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * wm8850-w70v2.dts * - Device tree file for Wondermedia WM8850 Tablet @@ -5,8 +6,6 @@ * - HongLianYing 'HLY070ML268-21A' 7" LCD panel * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * Licensed under GPLv2 or later */ /dts-v1/; diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi index 8fbccfbe75f3..65c9271050e6 100644 --- a/arch/arm/boot/dts/wm8850.dtsi +++ b/arch/arm/boot/dts/wm8850.dtsi @@ -1,14 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * wm8850.dtsi - Device tree file for Wondermedia WM8850 SoC * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "wm,wm8850"; cpus { @@ -22,6 +21,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/arch/arm/boot/dts/zx296702-ad1.dts b/arch/arm/boot/dts/zx296702-ad1.dts index eedd3fcbc002..bd9400840023 100644 --- a/arch/arm/boot/dts/zx296702-ad1.dts +++ b/arch/arm/boot/dts/zx296702-ad1.dts @@ -14,6 +14,7 @@ }; memory { + device_type = "memory"; reg = <0x50000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi index 240e7a23d81f..afd98de029be 100644 --- a/arch/arm/boot/dts/zx296702.dtsi +++ b/arch/arm/boot/dts/zx296702.dtsi @@ -1,10 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -#include "skeleton.dtsi" #include <dt-bindings/clock/zx296702-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { + #address-cells = <1>; + #size-cells = <1>; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/zynq-zturn.dts index b38704657960..5ec616ebca08 100644 --- a/arch/arm/boot/dts/zynq-zturn.dts +++ b/arch/arm/boot/dts/zynq-zturn.dts @@ -54,7 +54,7 @@ label = "K1"; gpios = <&gpio0 0x32 0x1>; linux,code = <0x66>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c index 57f3b7512636..13e561737ca8 100644 --- a/arch/arm/common/bL_switcher.c +++ b/arch/arm/common/bL_switcher.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/common/bL_switcher.c -- big.LITTLE cluster switcher core driver * * Created by: Nicolas Pitre, March 2012 * Copyright: (C) 2012-2013 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/atomic.h> diff --git a/arch/arm/common/bL_switcher_dummy_if.c b/arch/arm/common/bL_switcher_dummy_if.c index f4dc1714a79e..cabc0659b329 100644 --- a/arch/arm/common/bL_switcher_dummy_if.c +++ b/arch/arm/common/bL_switcher_dummy_if.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/common/bL_switcher_dummy_if.c -- b.L switcher dummy interface * @@ -5,10 +6,6 @@ * Copyright: (C) 2012-2013 Linaro Limited * * Dummy interface to user space for debugging purpose only. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 5ba4622030ca..f4b719bde763 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/common/dmabounce.c * @@ -16,10 +17,6 @@ * * Copyright (C) 2002 Hewlett Packard Company. * Copyright (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/common/firmware.c b/arch/arm/common/firmware.c index 27ddccb1131f..c1f8f581b41d 100644 --- a/arch/arm/common/firmware.c +++ b/arch/arm/common/firmware.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Samsung Electronics. * Kyungmin Park <kyungmin.park@samsung.com> * Tomasz Figa <t.figa@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 996aed3b4eee..9ec740cac469 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/common/it8152.c * @@ -9,10 +10,6 @@ * * Thanks to Guennadi Liakhovetski <gl@dsa-ac.de> for IRQ enumberation * and demux code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/sched.h> diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 51936bde1eb2..62f241b09fe3 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/common/locomo.c * * Sharp LoCoMo support * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file contains all generic LoCoMo support. * * All initialization functions provided here are intended to be called diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index ad574d20415c..e24ad60891b2 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/common/mcpm_entry.c -- entry point for multi-cluster PM * * Created by: Nicolas Pitre, March 2012 * Copyright: (C) 2012-2013 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/export.h> @@ -381,7 +378,7 @@ static int __init nocache_trampoline(unsigned long _arg) unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); phys_reset_t phys_reset; - mcpm_set_entry_vector(cpu, cluster, cpu_resume); + mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp); setup_mm_for_reboot(); __mcpm_cpu_going_down(cpu, cluster); diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S index 08b3bb9bc6a2..d5bd75dd576d 100644 --- a/arch/arm/common/mcpm_head.S +++ b/arch/arm/common/mcpm_head.S @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/common/mcpm_head.S -- kernel entry point for multi-cluster PM * * Created by: Nicolas Pitre, March 2012 * Copyright: (C) 2012-2013 Linaro Limited * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * * Refer to Documentation/arm/cluster-pm-race-avoidance.txt * for details of the synchronisation algorithms used here. */ diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c index c773157646d3..3e172f4b0ed9 100644 --- a/arch/arm/common/mcpm_platsmp.c +++ b/arch/arm/common/mcpm_platsmp.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-vexpress/mcpm_platsmp.c * * Created by: Nicolas Pitre, November 2012 * Copyright: (C) 2012-2013 Linaro Limited * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Code to handle secondary CPU bringup and hotplug for the cluster power API. */ diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 45412d21aa6b..947ef7981d92 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/common/sa1111.c * @@ -5,10 +6,6 @@ * * Original code by John Dorsey * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file contains all generic SA1111 support. * * All initialization functions provided here are intended to be called @@ -32,7 +29,7 @@ #include <mach/hardware.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/hardware/sa1111.h> diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 9ba45ade5f48..60130bd7b182 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -1,14 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support code for the SCOOP interface found on various Sharp PDAs * * Copyright (c) 2004 Richard Purdie * * Based on code written by Sharp/Lineo for 2.4 kernels - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/device.h> diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c index 025f6ce38596..efeb5724d9e9 100644 --- a/arch/arm/common/sharpsl_param.c +++ b/arch/arm/common/sharpsl_param.c @@ -1,14 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hardware parameter area specific to Sharp SL series devices * * Copyright (c) 2005 Richard Purdie * * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S index 8b7df283fedf..9675cc15d0c4 100644 --- a/arch/arm/common/vlock.S +++ b/arch/arm/common/vlock.S @@ -1,19 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * vlock.S - simple voting lock implementation for ARM * * Created by: Dave Martin, 2012-08-16 * Copyright: (C) 2012-2013 Linaro Limited * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * * This algorithm is described in more detail in * Documentation/arm/vlocks.txt. */ diff --git a/arch/arm/common/vlock.h b/arch/arm/common/vlock.h index 3b441475a59b..422429781f87 100644 --- a/arch/arm/common/vlock.h +++ b/arch/arm/common/vlock.h @@ -1,17 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * vlock.h - simple voting lock implementation * * Created by: Dave Martin, 2012-08-16 * Copyright: (C) 2012-2013 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __VLOCK_H diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig index 1446262921b4..190d6e9d3296 100644 --- a/arch/arm/configs/aspeed_g4_defconfig +++ b/arch/arm/configs/aspeed_g4_defconfig @@ -23,7 +23,6 @@ CONFIG_SLAB_FREELIST_RANDOM=y CONFIG_JUMP_LABEL=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_GCC_PLUGINS=y -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEBUG_FS is not set # CONFIG_IOSCHED_DEADLINE is not set @@ -248,7 +247,6 @@ CONFIG_PANIC_TIMEOUT=-1 # CONFIG_SCHED_DEBUG is not set CONFIG_SCHED_STACK_END_CHECK=y CONFIG_FUNCTION_TRACER=y -# CONFIG_TRACING_EVENTS_GPIO is not set # CONFIG_RUNTIME_TESTING_MENU is not set CONFIG_DEBUG_WX=y CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 02fa3a41add5..407ffb7655a8 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -23,7 +23,6 @@ CONFIG_SLAB_FREELIST_RANDOM=y CONFIG_JUMP_LABEL=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_GCC_PLUGINS=y -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEBUG_FS is not set # CONFIG_IOSCHED_DEADLINE is not set @@ -248,7 +247,6 @@ CONFIG_PANIC_TIMEOUT=-1 # CONFIG_SCHED_DEBUG is not set CONFIG_SCHED_STACK_END_CHECK=y CONFIG_FUNCTION_TRACER=y -# CONFIG_TRACING_EVENTS_GPIO is not set # CONFIG_RUNTIME_TESTING_MENU is not set CONFIG_DEBUG_WX=y CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index e4b1be66b3f5..a88e31449880 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -9,7 +9,6 @@ CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set @@ -56,7 +55,7 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig index 8e17e7ed1f02..53864316bee1 100644 --- a/arch/arm/configs/axm55xx_defconfig +++ b/arch/arm/configs/axm55xx_defconfig @@ -155,10 +155,6 @@ CONFIG_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_HID_A4TECH=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index bb6a35fb1dd7..dcf7610cfe55 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -91,6 +91,8 @@ CONFIG_THERMAL=y CONFIG_BCM2835_THERMAL=y CONFIG_WATCHDOG=y CONFIG_BCM2835_WDT=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_DRM=y CONFIG_DRM_VC4=y CONFIG_FB_SIMPLE=y @@ -129,6 +131,7 @@ CONFIG_DMADEVICES=y CONFIG_DMA_BCM2835=y CONFIG_STAGING=y CONFIG_SND_BCM2835=m +CONFIG_VIDEO_BCM2835=m CONFIG_MAILBOX=y CONFIG_BCM2835_MBOX=y # CONFIG_IOMMU_SUPPORT is not set @@ -158,7 +161,6 @@ CONFIG_PRINTK_TIME=y CONFIG_BOOT_PRINTK_DELAY=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_MEMORY_INIT=y diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig index fc105c9178cc..c255dab36bde 100644 --- a/arch/arm/configs/clps711x_defconfig +++ b/arch/arm/configs/clps711x_defconfig @@ -6,7 +6,6 @@ CONFIG_RD_LZMA=y CONFIG_EMBEDDED=y CONFIG_SLOB=y CONFIG_JUMP_LABEL=y -# CONFIG_LBDAF is not set CONFIG_PARTITION_ADVANCED=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_CLPS711X=y @@ -36,7 +35,7 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_GPIO=y CONFIG_NETDEVICES=y # CONFIG_NET_CADENCE is not set diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig index fb45b4983d3c..5344434df652 100644 --- a/arch/arm/configs/cm_x2xx_defconfig +++ b/arch/arm/configs/cm_x2xx_defconfig @@ -58,7 +58,7 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PXA2XX=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_GPIO=m CONFIG_MTD_NAND_CM_X270=y CONFIG_MTD_NAND_PLATFORM=y diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index 5e349c625b71..3707a014cbc4 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -48,7 +48,7 @@ CONFIG_LIB80211=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig index c6dcd6e4f4e6..419b73564f29 100644 --- a/arch/arm/configs/cns3420vb_defconfig +++ b/arch/arm/configs/cns3420vb_defconfig @@ -60,7 +60,6 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_AUTOFS4_FS=y CONFIG_FSCACHE=y CONFIG_TMPFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y # CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 8995695fc118..8d484e4d51cc 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -64,7 +64,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PXA2XX=y CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DISKONCHIP=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000 diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 09e1672777c9..d99725984947 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -87,7 +87,7 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_ROM=y CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_SHARPSL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_SD=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 207962a656a2..4a8cad4d3707 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -74,7 +74,7 @@ CONFIG_MTD_CFI_INTELEXT=m CONFIG_MTD_CFI_AMDSTD=m CONFIG_MTD_PHYSMAP=m CONFIG_MTD_M25P80=m -CONFIG_MTD_NAND=m +CONFIG_MTD_RAW_NAND=m CONFIG_MTD_NAND_DAVINCI=m CONFIG_MTD_SPI_NOR=m CONFIG_MTD_UBI=m diff --git a/arch/arm/configs/efm32_defconfig b/arch/arm/configs/efm32_defconfig index 860d27138e6f..10ea92513a69 100644 --- a/arch/arm/configs/efm32_defconfig +++ b/arch/arm/configs/efm32_defconfig @@ -11,7 +11,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EMBEDDED=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_SLUB_DEBUG is not set -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set @@ -94,7 +93,6 @@ CONFIG_ROMFS_BACKED_BY_MTD=y # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig index 30a67523f860..61228a25ba8d 100644 --- a/arch/arm/configs/em_x270_defconfig +++ b/arch/arm/configs/em_x270_defconfig @@ -54,7 +54,7 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PXA2XX=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 78cd73d1c795..14889a785f07 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -63,7 +63,7 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_BLK_DEV_NBD=y CONFIG_EEPROM_LEGACY=y CONFIG_SCSI=y diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index cd27d651463c..b85575867d21 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -43,7 +43,7 @@ CONFIG_MAC80211_RC_PID=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_MTD=m -CONFIG_MTD_NAND=m +CONFIG_MTD_RAW_NAND=m CONFIG_MTD_NAND_TMIO=m CONFIG_BLK_DEV_LOOP=m # CONFIG_SCSI_PROC_FS is not set @@ -103,7 +103,6 @@ CONFIG_NFS_V3=y CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index d635edfb6ff2..c95c54284da2 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -9,7 +9,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_EXYNOS=y CONFIG_ARCH_EXYNOS3=y -CONFIG_EXYNOS5420_MCPM=y CONFIG_SMP=y CONFIG_BIG_LITTLE=y CONFIG_NR_CPUS=8 diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 484e51fbd4a6..e3afca5bd9d6 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -13,7 +13,6 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_PXA=y diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig index 553777ac2814..ef9aae89907d 100644 --- a/arch/arm/configs/gemini_defconfig +++ b/arch/arm/configs/gemini_defconfig @@ -87,6 +87,5 @@ CONFIG_TMPFS_POSIX_ACL=y CONFIG_ROMFS_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index ebeca11faa48..175881b7da7c 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -4,7 +4,6 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index f204017c26b9..9b779e13e05d 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -12,7 +12,6 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_PXA=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 8661dd9b064a..f2cf0722e8e1 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -61,7 +61,7 @@ CONFIG_MTD_CFI_GEOMETRY=y # CONFIG_MTD_CFI_I2 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_MXC=y CONFIG_MTD_UBI=y CONFIG_EEPROM_AT24=y @@ -170,6 +170,9 @@ CONFIG_IMX_SDMA=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_FSL_MX25_ADC=y +CONFIG_PWM=y +CONFIG_PWM_IMX1=y +CONFIG_PWM_IMX27=y CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 5586a5074a96..8116648a8efd 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -110,7 +110,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_M25P80=y CONFIG_MTD_SST25L=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_MTD_NAND_VF610_NFC=y CONFIG_MTD_NAND_MXC=y @@ -398,7 +398,7 @@ CONFIG_MAG3110=y CONFIG_MPL3115=y CONFIG_PWM=y CONFIG_PWM_FSL_FTM=y -CONFIG_PWM_IMX=y +CONFIG_PWM_IMX27=y CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_VF610_OCOTP=y CONFIG_TEE=y diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 69cb8f1efcea..747550c7af2f 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -27,6 +27,7 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPUFREQ_DT=y +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -53,13 +54,17 @@ CONFIG_E100=y CONFIG_SMC91X=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_SERIO_SERPORT is not set -CONFIG_FB=y +CONFIG_DRM=y +CONFIG_DRM_DUMB_VGA_DAC=y +CONFIG_DRM_PL111=y CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_ARMCLCD=y CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set +CONFIG_LOGO=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 8c3c99cd6de9..39ebcce3bc2f 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -112,7 +112,7 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_IXP4XX=y -CONFIG_MTD_NAND=m +CONFIG_MTD_RAW_NAND=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 3ded35a07f45..72fee57aad2f 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -124,7 +124,7 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_PLATRAM=y CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index 23df2518203d..e3d5e15d66d1 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -1,5 +1,6 @@ CONFIG_CROSS_COMPILE="arm-linux-gnueabihf-" CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_BLK_DEV_INITRD=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set @@ -17,22 +18,20 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EMBEDDED=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_SLUB_DEBUG is not set -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set # CONFIG_MMU is not set -CONFIG_ARM_SINGLE_ARMV7M=y CONFIG_ARCH_LPC18XX=y CONFIG_SET_MEM_PARAM=y CONFIG_DRAM_BASE=0x28000000 CONFIG_DRAM_SIZE=0x02000000 CONFIG_FLASH_MEM_BASE=0x1b000000 CONFIG_FLASH_SIZE=0x00080000 -CONFIG_PREEMPT=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y @@ -69,7 +68,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CIRRUS is not set # CONFIG_NET_VENDOR_FARADAY is not set @@ -90,7 +88,6 @@ CONFIG_STMMAC_ETH=y CONFIG_SMSC_PHY=y # CONFIG_USB_NET_DRIVERS is not set # CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y @@ -101,13 +98,11 @@ CONFIG_KEYBOARD_GPIO_POLLED=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set -CONFIG_I2C=y CONFIG_I2C_LPC2K=y CONFIG_SPI=y CONFIG_SPI_PL022=y @@ -121,8 +116,10 @@ CONFIG_WATCHDOG=y CONFIG_LPC18XX_WATCHDOG=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y +CONFIG_DRM=y +CONFIG_DRM_PL111=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y @@ -144,15 +141,14 @@ CONFIG_AMBA_PL08X=y CONFIG_LPC18XX_DMAMUX=y CONFIG_MEMORY=y CONFIG_ARM_PL172_MPMC=y -CONFIG_PWM=y -CONFIG_PWM_LPC18XX_SCT=y CONFIG_IIO=y CONFIG_MMA7455_I2C=y CONFIG_LPC18XX_ADC=y CONFIG_LPC18XX_DAC=y CONFIG_IIO_SYSFS_TRIGGER=y +CONFIG_PWM=y +CONFIG_PWM_LPC18XX_SCT=y CONFIG_PHY_LPC18XX_USB_OTG=y -CONFIG_NVMEM=y CONFIG_NVMEM_LPC18XX_EEPROM=y CONFIG_EXT2_FS=y # CONFIG_FILE_LOCKING is not set @@ -160,9 +156,10 @@ CONFIG_EXT2_FS=y # CONFIG_INOTIFY_USER is not set CONFIG_JFFS2_FS=y # CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y @@ -170,5 +167,3 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 0b54b4024e51..4b3b2c693c29 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -1,6 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 @@ -11,13 +12,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y -CONFIG_JUMP_LABEL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_LPC32XX=y -CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -26,6 +21,11 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0" CONFIG_CPU_IDLE=y CONFIG_VFP=y +CONFIG_JUMP_LABEL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y CONFIG_PACKET=y @@ -47,7 +47,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_SLC_LPC32XX=y CONFIG_MTD_NAND_MLC_LPC32XX=y CONFIG_MTD_UBI=y @@ -56,6 +56,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=1 CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_SRAM=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_SCSI=y @@ -75,9 +76,6 @@ CONFIG_LPC_ENET=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y @@ -92,48 +90,39 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_HS_LPC32XX=y +CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_PNX=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_EM=y CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_GPIO_PL061=y -CONFIG_GPIO_ADP5588=y -CONFIG_GPIO_ADNP=y -CONFIG_GPIO_MAX7300=y -CONFIG_GPIO_MAX732X=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCF857X=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_MAX7301=y -CONFIG_GPIO_MC33880=y -CONFIG_PINCTRL_MCP23S08=y -CONFIG_PINCTRL_SX150X=y CONFIG_SENSORS_DS620=y CONFIG_SENSORS_MAX6639=y CONFIG_WATCHDOG=y CONFIG_PNX4008_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_DRM=y +CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_PL111=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_SOUND=y CONFIG_SND=y -CONFIG_SND_SEQUENCER=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set CONFIG_SND_DEBUG=y CONFIG_SND_DEBUG_VERBOSE=y +CONFIG_SND_SEQUENCER=y # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set @@ -146,7 +135,6 @@ CONFIG_USB_LPC32XX=y CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y -# CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SPI=y CONFIG_NEW_LEDS=y @@ -169,10 +157,10 @@ CONFIG_RTC_DRV_LPC32XX=y CONFIG_DMADEVICES=y CONFIG_AMBA_PL08X=y CONFIG_STAGING=y -CONFIG_LPC32XX_ADC=y CONFIG_MEMORY=y CONFIG_ARM_PL172_MPMC=y CONFIG_IIO=y +CONFIG_LPC32XX_ADC=y CONFIG_MAX517=y CONFIG_PWM=y CONFIG_PWM_LPC32XX=y @@ -186,18 +174,27 @@ CONFIG_JFFS2_FS_WBUF_VERIFY=y CONFIG_UBIFS_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y +CONFIG_CRYPTO_ANSI_CPRNG=y +# CONFIG_CRYPTO_HW is not set +CONFIG_CRC_CCITT=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y +CONFIG_GDB_SCRIPTS=y +CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_PANIC_ON_OOPS=y +CONFIG_PANIC_TIMEOUT=5 # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set -# CONFIG_ARM_UNWIND is not set CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y -CONFIG_CRYPTO_ANSI_CPRNG=y -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig new file mode 100644 index 000000000000..7c07f9893a0f --- /dev/null +++ b/arch/arm/configs/milbeaut_m10v_defconfig @@ -0,0 +1,119 @@ +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_CGROUPS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +CONFIG_ARCH_MILBEAUT=y +CONFIG_ARCH_MILBEAUT_M10V=y +CONFIG_ARM_THUMBEE=y +# CONFIG_VDSO is not set +# CONFIG_CACHE_L2X0 is not set +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_720789=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_ARM_ERRATA_754327=y +CONFIG_ARM_ERRATA_764369=y +CONFIG_ARM_ERRATA_775420=y +CONFIG_ARM_ERRATA_798181=y +CONFIG_SMP=y +# CONFIG_SMP_ON_UP is not set +# CONFIG_ARM_CPU_TOPOLOGY is not set +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_NR_CPUS=16 +CONFIG_THUMB2_KERNEL=y +# CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set +# CONFIG_ARM_PATCH_IDIV is not set +CONFIG_HIGHMEM=y +CONFIG_FORCE_MAX_ZONEORDER=12 +CONFIG_SECCOMP=y +CONFIG_KEXEC=y +CONFIG_EFI=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +CONFIG_CPUFREQ_DT=y +CONFIG_QORIQ_CPUFREQ=y +CONFIG_CPU_IDLE=y +CONFIG_ARM_CPUIDLE=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_EFI_VARS=m +CONFIG_EFI_CAPSULE_LOADER=m +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_SHA1_ARM_CE=m +CONFIG_CRYPTO_SHA2_ARM_CE=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m +CONFIG_CRYPTO_AES_ARM_CE=m +CONFIG_CRYPTO_GHASH_ARM_CE=m +CONFIG_CRYPTO_CRC32_ARM_CE=m +CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_CMDLINE_PARTITION=y +CONFIG_CMA=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 +CONFIG_OF_OVERLAY=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_SRAM=y +CONFIG_INPUT_FF_MEMLESS=m +CONFIG_INPUT_MATRIXKMAP=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_SERIO_LIBPS2=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_DEV_BUS=y +# CONFIG_HW_RANDOM is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_HWMON is not set +CONFIG_MEDIA_SUPPORT=m +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_SYNC_FILE=y +# CONFIG_VIRTIO_MENU is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_SOC_BRCMSTB=y +CONFIG_MEMORY=y +# CONFIG_ARM_PMU is not set +CONFIG_EXT4_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +CONFIG_KEYS=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_SEQIV=m +# CONFIG_CRYPTO_ECHAINIV is not set +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_HW is not set +CONFIG_CRC_CCITT=m +CONFIG_CRC_ITU_T=m +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 88ea02e7ba19..7d26ca0b1302 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -92,7 +92,7 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_S3C2410=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_LPDDR=y @@ -152,7 +152,7 @@ CONFIG_SPI_S3C24XX=y CONFIG_SPI_SPIDEV=y CONFIG_GPIO_SYSFS=y CONFIG_SENSORS_LM75=y -CONFIG_THERMAL=m +CONFIG_THERMAL=y CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_FB=y @@ -298,7 +298,6 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m CONFIG_DEBUG_INFO=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index 1eeee7f11d91..94deb0ed0541 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -28,7 +28,7 @@ CONFIG_IP_PNP=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_GENERIC=y # CONFIG_BLK_DEV is not set diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig index 2da0d9ee2107..6a11669fa536 100644 --- a/arch/arm/configs/moxart_defconfig +++ b/arch/arm/configs/moxart_defconfig @@ -15,7 +15,6 @@ CONFIG_EMBEDDED=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_ARCH_MULTI_V4=y @@ -125,7 +124,6 @@ CONFIG_CONFIGFS_FS=y CONFIG_JFFS2_FS=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_PAGEALLOC=y CONFIG_DEBUG_OBJECTS=y diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig index 0bcdec7cc169..1d923dbb9928 100644 --- a/arch/arm/configs/mps2_defconfig +++ b/arch/arm/configs/mps2_defconfig @@ -100,7 +100,6 @@ CONFIG_ROOT_NFS=y CONFIG_NLS=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig index 9a6390c172d6..0b42bddfbc82 100644 --- a/arch/arm/configs/multi_v4t_defconfig +++ b/arch/arm/configs/multi_v4t_defconfig @@ -5,7 +5,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_SLOB=y CONFIG_JUMP_LABEL=y -# CONFIG_LBDAF is not set CONFIG_PARTITION_ADVANCED=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MULTI_V4T=y @@ -39,7 +38,7 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_GPIO=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 318b76fa26d1..63b5a8824f0f 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -87,7 +87,7 @@ CONFIG_MTD_CFI_GEOMETRY=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_ORION=y CONFIG_MTD_SPI_NOR=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 5bee34a7ff2e..6b748f214eae 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -5,10 +5,6 @@ CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_CMDLINE_PARTITION=y CONFIG_ARCH_VIRT=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_ARTPEC=y @@ -33,7 +29,6 @@ CONFIG_MACH_BERLIN_BG2CD=y CONFIG_MACH_BERLIN_BG2Q=y CONFIG_ARCH_DIGICOLOR=y CONFIG_ARCH_EXYNOS=y -CONFIG_EXYNOS5420_MCPM=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_HISI=y CONFIG_ARCH_HI3xxx=y @@ -48,12 +43,14 @@ CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y CONFIG_SOC_IMX6SX=y CONFIG_SOC_IMX6UL=y -CONFIG_SOC_IMX7D=y CONFIG_SOC_LS1021A=y +CONFIG_SOC_IMX7D=y CONFIG_SOC_VF610=y CONFIG_ARCH_KEYSTONE=y CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_MESON=y +CONFIG_ARCH_MILBEAUT=y +CONFIG_ARCH_MILBEAUT_M10V=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y @@ -74,23 +71,6 @@ CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_RENESAS=y -CONFIG_ARCH_EMEV2=y -CONFIG_ARCH_R7S72100=y -CONFIG_ARCH_R8A73A4=y -CONFIG_ARCH_R8A7740=y -CONFIG_ARCH_R8A7743=y -CONFIG_ARCH_R8A7744=y -CONFIG_ARCH_R8A7745=y -CONFIG_ARCH_R8A77470=y -CONFIG_ARCH_R8A7778=y -CONFIG_ARCH_R8A7779=y -CONFIG_ARCH_R8A7790=y -CONFIG_ARCH_R8A7791=y -CONFIG_ARCH_R8A7792=y -CONFIG_ARCH_R8A7793=y -CONFIG_ARCH_R8A7794=y -CONFIG_ARCH_R9A06G032=y -CONFIG_ARCH_SH73A0=y CONFIG_ARCH_SOCFPGA=y CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR13XX=y @@ -106,16 +86,6 @@ CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VEXPRESS_TC2_PM=y CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MVEBU=y -CONFIG_PCI_TEGRA=y -CONFIG_PCI_RCAR_GEN2=y -CONFIG_PCIE_RCAR=y -CONFIG_PCI_DRA7XX_EP=y -CONFIG_PCI_KEYSTONE=y -CONFIG_PCI_ENDPOINT=y -CONFIG_PCI_ENDPOINT_CONFIGFS=y -CONFIG_PCI_EPF_TEST=m CONFIG_SMP=y CONFIG_NR_CPUS=16 CONFIG_SECCOMP=y @@ -138,6 +108,29 @@ CONFIG_ARM_CPUIDLE=y CONFIG_ARM_ZYNQ_CPUIDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_KERNEL_MODE_NEON=y +CONFIG_RASPBERRYPI_FIRMWARE=y +CONFIG_TRUSTED_FOUNDATIONS=y +CONFIG_BCM47XX_NVRAM=y +CONFIG_BCM47XX_SPROM=y +CONFIG_EFI_VARS=m +CONFIG_EFI_CAPSULE_LOADER=m +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_SHA1_ARM_CE=m +CONFIG_CRYPTO_SHA2_ARM_CE=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m +CONFIG_CRYPTO_AES_ARM_CE=m +CONFIG_CRYPTO_GHASH_ARM_CE=m +CONFIG_CRYPTO_CRC32_ARM_CE=m +CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_GCC_PLUGINS=y +CONFIG_GCC_PLUGIN_STRUCTLEAK=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_CMDLINE_PARTITION=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -172,16 +165,29 @@ CONFIG_MAC80211=m CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_MVEBU=y +CONFIG_PCI_TEGRA=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PCIE_RCAR=y +CONFIG_PCI_DRA7XX_EP=y +CONFIG_PCI_KEYSTONE=y +CONFIG_PCI_ENDPOINT=y +CONFIG_PCI_ENDPOINT_CONFIGFS=y +CONFIG_PCI_EPF_TEST=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_CMA_SIZE_MBYTES=64 CONFIG_OMAP_OCP2SCP=y CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_NAND_OMAP2=y CONFIG_MTD_NAND_OMAP_BCH=y @@ -192,7 +198,6 @@ CONFIG_MTD_NAND_BRCMNAND=y CONFIG_MTD_NAND_VF610_NFC=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y -CONFIG_SPI_FSL_QUADSPI=m CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y @@ -227,7 +232,6 @@ CONFIG_VIRTIO_NET=y CONFIG_B53_SPI_DRIVER=m CONFIG_B53_MDIO_DRIVER=m CONFIG_B53_MMAP_DRIVER=m -CONFIG_B53_SRAB_DRIVER=m CONFIG_NET_DSA_BCM_SF2=m CONFIG_SUN4I_EMAC=y CONFIG_BCMGENET=m @@ -256,7 +260,6 @@ CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y -CONFIG_REALTEK_PHY=y CONFIG_ROCKCHIP_PHY=y CONFIG_SMSC_PHY=y CONFIG_USB_PEGASUS=y @@ -285,6 +288,7 @@ CONFIG_MOUSE_ELAN_I2C=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADC=m CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_ELAN=m CONFIG_TOUCHSCREEN_MMS114=m CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_TOUCHSCREEN_ST1232=m @@ -296,6 +300,7 @@ CONFIG_INPUT_MAX8997_HAPTIC=m CONFIG_INPUT_CPCAP_PWRBUTTON=m CONFIG_INPUT_AXP20X_PEK=m CONFIG_INPUT_ADXL34X=m +CONFIG_INPUT_STPMIC1_ONKEY=y CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -346,6 +351,8 @@ CONFIG_SERIAL_DEV_BUS=y CONFIG_VIRTIO_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_ST=y +CONFIG_TCG_TPM=m +CONFIG_TCG_TIS_I2C_INFINEON=m CONFIG_I2C_CHARDEV=y CONFIG_I2C_ARB_GPIO_CHALLENGE=m CONFIG_I2C_MUX_PCA954x=y @@ -383,6 +390,7 @@ CONFIG_SPI_BCM2835=y CONFIG_SPI_BCM2835AUX=y CONFIG_SPI_CADENCE=y CONFIG_SPI_DAVINCI=y +CONFIG_SPI_FSL_QUADSPI=m CONFIG_SPI_GPIO=m CONFIG_SPI_FSL_DSPI=m CONFIG_SPI_OMAP24XX=y @@ -404,6 +412,7 @@ CONFIG_SPI_XILINX=y CONFIG_SPI_SPIDEV=y CONFIG_SPMI=y CONFIG_PINCTRL_AS3722=y +CONFIG_PINCTRL_RZA2=y CONFIG_PINCTRL_PALMAS=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y @@ -440,9 +449,11 @@ CONFIG_POWER_RESET_RMOBILE=y CONFIG_BATTERY_ACT8945A=y CONFIG_BATTERY_CPCAP=m CONFIG_BATTERY_SBS=y +CONFIG_BATTERY_BQ27XXX=m CONFIG_AXP20X_POWER=m CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m +CONFIG_CHARGER_GPIO=m CONFIG_CHARGER_CPCAP=m CONFIG_CHARGER_MAX14577=m CONFIG_CHARGER_MAX77693=m @@ -482,6 +493,7 @@ CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_RENESAS_WDT=m +CONFIG_STPMIC1_WATCHDOG=y CONFIG_BCM47XX_WDT=y CONFIG_BCM2835_WDT=y CONFIG_BCM_KONA_WDT=y @@ -501,6 +513,7 @@ CONFIG_MFD_AXP20X_RSB=y CONFIG_MFD_CROS_EC=m CONFIG_CROS_EC_I2C=m CONFIG_CROS_EC_SPI=m +CONFIG_MFD_CROS_EC_CHARDEV=m CONFIG_MFD_DA9063=m CONFIG_MFD_MAX14577=y CONFIG_MFD_MAX77686=y @@ -523,6 +536,7 @@ CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_MFD_STM32_LPTIMER=m +CONFIG_MFD_STPMIC1=y CONFIG_REGULATOR_ACT8865=y CONFIG_REGULATOR_ACT8945A=y CONFIG_REGULATOR_ANATOP=y @@ -555,6 +569,7 @@ CONFIG_REGULATOR_RN5T618=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_STM32_VREFBUF=m +CONFIG_REGULATOR_STPMIC1=y CONFIG_REGULATOR_TI_ABB=y CONFIG_REGULATOR_TPS51632=y CONFIG_REGULATOR_TPS62360=y @@ -575,8 +590,6 @@ CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_STM32_DCMI=m -CONFIG_SOC_CAMERA=m -CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m CONFIG_VIDEO_S5P_FIMC=m CONFIG_VIDEO_S5P_MIPI_CSIS=m @@ -622,26 +635,27 @@ CONFIG_DRM_RCAR_LVDS=y CONFIG_DRM_SUN4I=m CONFIG_DRM_FSL_DCU=m CONFIG_DRM_TEGRA=y -CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m -CONFIG_DRM_PANEL_RAYDIUM_RM68200=m +CONFIG_DRM_STM=m +CONFIG_DRM_STM_DSI=m CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_SAMSUNG_LD9040=m +CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m +CONFIG_DRM_PANEL_RAYDIUM_RM68200=m CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m CONFIG_DRM_DUMB_VGA_DAC=m CONFIG_DRM_NXP_PTN3460=m CONFIG_DRM_PARADE_PS8622=m +CONFIG_DRM_SII902X=m CONFIG_DRM_SII9234=m CONFIG_DRM_TOSHIBA_TC358764=m CONFIG_DRM_I2C_ADV7511=m CONFIG_DRM_I2C_ADV7511_AUDIO=y CONFIG_DRM_STI=m -CONFIG_DRM_STM=m -CONFIG_DRM_STM_DSI=m CONFIG_DRM_VC4=m CONFIG_DRM_ETNAVIV=m CONFIG_DRM_MXSFB=m -CONFIG_FB_ARMCLCD=y +CONFIG_DRM_PL111=m CONFIG_FB_EFI=y CONFIG_FB_WM8505=y CONFIG_FB_SH_MOBILE_LCDC=y @@ -696,7 +710,6 @@ CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_SPDIF=m CONFIG_SND_SOC_STI_SAS=m CONFIG_SND_SOC_WM8978=m -CONFIG_SND_SIMPLE_SCU_CARD=m CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y @@ -826,6 +839,7 @@ CONFIG_RTC_DRV_MAX8997=m CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_PCF85363=m CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_TWL4030=y CONFIG_RTC_DRV_PALMAS=y @@ -871,7 +885,6 @@ CONFIG_UNIPHIER_MDMAC=y CONFIG_XILINX_DMA=y CONFIG_QCOM_BAM_DMA=y CONFIG_DW_DMAC=y -CONFIG_SH_DMAE=y CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=m CONFIG_VIRTIO_PCI=y @@ -904,6 +917,24 @@ CONFIG_QCOM_GSBI=y CONFIG_QCOM_PM=y CONFIG_QCOM_SMD_RPM=m CONFIG_QCOM_WCNSS_CTRL=m +CONFIG_ARCH_EMEV2=y +CONFIG_ARCH_R7S72100=y +CONFIG_ARCH_R7S9210=y +CONFIG_ARCH_R8A73A4=y +CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7743=y +CONFIG_ARCH_R8A7744=y +CONFIG_ARCH_R8A7745=y +CONFIG_ARCH_R8A77470=y +CONFIG_ARCH_R8A7778=y +CONFIG_ARCH_R8A7779=y +CONFIG_ARCH_R8A7790=y +CONFIG_ARCH_R8A7791=y +CONFIG_ARCH_R8A7792=y +CONFIG_ARCH_R8A7793=y +CONFIG_ARCH_R8A7794=y +CONFIG_ARCH_R9A06G032=y +CONFIG_ARCH_SH73A0=y CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y @@ -919,6 +950,7 @@ CONFIG_AT91_SAMA5D2_ADC=m CONFIG_BERLIN2_ADC=m CONFIG_CPCAP_ADC=m CONFIG_EXYNOS_ADC=m +CONFIG_MESON_SARADC=m CONFIG_STM32_ADC_CORE=m CONFIG_STM32_ADC=m CONFIG_STM32_DFSDM_ADC=m @@ -926,8 +958,12 @@ CONFIG_VF610_ADC=m CONFIG_XILINX_XADC=y CONFIG_STM32_LPTIMER_CNT=m CONFIG_STM32_DAC=m +CONFIG_ROCKCHIP_SARADC=m +CONFIG_IIO_CROS_EC_SENSORS_CORE=m +CONFIG_IIO_CROS_EC_SENSORS=m CONFIG_MPU3050_I2C=y CONFIG_CM36651=m +CONFIG_IIO_CROS_EC_LIGHT_PROX=m CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y CONFIG_AK8975=y @@ -963,24 +999,21 @@ CONFIG_PHY_RCAR_GEN2=m CONFIG_PHY_ROCKCHIP_DP=m CONFIG_PHY_ROCKCHIP_USB=y CONFIG_PHY_SAMSUNG_USB2=m +CONFIG_PHY_UNIPHIER_USB2=y +CONFIG_PHY_UNIPHIER_USB3=y CONFIG_PHY_MIPHY28LP=y CONFIG_PHY_STIH407_USB=y CONFIG_PHY_STM32_USBPHYC=y CONFIG_PHY_TEGRA_XUSB=y CONFIG_PHY_DM816X_USB=m -CONFIG_PHY_UNIPHIER_USB3=y -CONFIG_PHY_UNIPHIER_USB2=y CONFIG_OMAP_USB2=y CONFIG_TI_PIPE3=y CONFIG_TWL4030_USB=m +CONFIG_MESON_MX_EFUSE=m +CONFIG_ROCKCHIP_EFUSE=m CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_SUNXI_SID=y CONFIG_NVMEM_VF610_OCOTP=y -CONFIG_RASPBERRYPI_FIRMWARE=y -CONFIG_BCM47XX_NVRAM=y -CONFIG_BCM47XX_SPROM=y -CONFIG_EFI_VARS=m -CONFIG_EFI_CAPSULE_LOADER=m CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -1002,8 +1035,6 @@ CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m @@ -1017,14 +1048,6 @@ CONFIG_CRYPTO_DEV_ATMEL_TDES=m CONFIG_CRYPTO_DEV_ATMEL_SHA=m CONFIG_CRYPTO_DEV_SUN4I_SS=m CONFIG_CRYPTO_DEV_ROCKCHIP=m -CONFIG_ARM_CRYPTO=y -CONFIG_CRYPTO_SHA1_ARM_NEON=m -CONFIG_CRYPTO_SHA1_ARM_CE=m -CONFIG_CRYPTO_SHA2_ARM_CE=m -CONFIG_CRYPTO_SHA512_ARM=m -CONFIG_CRYPTO_AES_ARM=m -CONFIG_CRYPTO_AES_ARM_BS=m -CONFIG_CRYPTO_AES_ARM_CE=m -CONFIG_CRYPTO_GHASH_ARM_CE=m -CONFIG_CRYPTO_CRC32_ARM_CE=m -CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_CMA_SIZE_MBYTES=64 +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 0448bd8075ac..e9567513f068 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -47,7 +47,7 @@ CONFIG_MTD_CFI_GEOMETRY=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_ORION=y CONFIG_BLK_DEV_LOOP=y # CONFIG_SCSI_PROC_FS is not set diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index 4b598da0d086..0e5577a31851 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -77,7 +77,7 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_ORION=y CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index 55140219ab11..3ac2e84fdeaa 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -52,7 +52,7 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y @@ -131,6 +131,7 @@ CONFIG_MV_XOR=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_MEMORY=y CONFIG_PWM=y +CONFIG_PHY_MVEBU_A38X_COMPHY=y CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 38480596c449..ed570a0d1f2a 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -50,7 +50,7 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_M25P80=y CONFIG_MTD_SST25L=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 0ac44acd5bc4..cfc094189d09 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -3,6 +3,7 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -10,16 +11,16 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_NOMADIK=y CONFIG_MACH_NOMADIK_8815NHK=y -CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -49,12 +50,12 @@ CONFIG_MTD=y CONFIG_MTD_TESTS=m CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_FSMC=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=y +CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y @@ -75,7 +76,6 @@ CONFIG_PPP_MPPE=m CONFIG_PPPOE=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m -# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y @@ -88,13 +88,22 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y -CONFIG_DEBUG_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_GPIO=y CONFIG_GPIO_STMPE=y # CONFIG_HWMON is not set CONFIG_MFD_STMPE=y +CONFIG_MFD_STW481X=y CONFIG_REGULATOR=y +CONFIG_DRM=y +CONFIG_DRM_PANEL_TPO_TPG110=y +CONFIG_DRM_PL111=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y CONFIG_MMC=y -# CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -105,6 +114,11 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL031=y CONFIG_DMADEVICES=y CONFIG_AMBA_PL08X=y +CONFIG_IIO=y +CONFIG_IIO_BUFFER=y +CONFIG_IIO_ST_ACCEL_3AXIS=y +CONFIG_PWM=y +CONFIG_PWM_STMPE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_FUSE_FS=y @@ -121,13 +135,12 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_DES=y CONFIG_DEBUG_INFO=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/nuc910_defconfig b/arch/arm/configs/nuc910_defconfig index a72653645f9d..c0d152c02fba 100644 --- a/arch/arm/configs/nuc910_defconfig +++ b/arch/arm/configs/nuc910_defconfig @@ -47,7 +47,6 @@ CONFIG_ROMFS_FS=y CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y # CONFIG_CRC32 is not set diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig index 614a0a28d0b4..8dde1186c2ef 100644 --- a/arch/arm/configs/nuc950_defconfig +++ b/arch/arm/configs/nuc950_defconfig @@ -64,6 +64,5 @@ CONFIG_ROMFS_FS=y CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig index b84bbd216153..6bb784f8eb5b 100644 --- a/arch/arm/configs/nuc960_defconfig +++ b/arch/arm/configs/nuc960_defconfig @@ -53,7 +53,6 @@ CONFIG_ROMFS_FS=y CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y # CONFIG_CRC32 is not set diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index cfc00b0961ec..82af77c093f1 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -17,7 +17,6 @@ CONFIG_OPROFILE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set @@ -90,7 +89,7 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=2 diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 9c6f436d1b12..c7bf9c493646 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -25,16 +25,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MULTI_V6=y CONFIG_POWER_AVS_OMAP=y CONFIG_POWER_AVS_OMAP_CLASS3=y @@ -48,15 +38,8 @@ CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCI_DRA7XX_EP=y -CONFIG_PCI_ENDPOINT=y -CONFIG_PCI_ENDPOINT_CONFIGFS=y -CONFIG_PCI_EPF_TEST=m CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_CMA=y CONFIG_SECCOMP=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -74,8 +57,27 @@ CONFIG_CPUFREQ_DT=m CONFIG_ARM_TI_CPUFREQ=y CONFIG_CPU_IDLE=y CONFIG_KERNEL_MODE_NEON=y -CONFIG_BINFMT_MISC=y CONFIG_PM_DEBUG=y +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m +CONFIG_CRYPTO_GHASH_ARM_CE=m +CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_BINFMT_MISC=y +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -118,6 +120,12 @@ CONFIG_AF_RXRPC=m CONFIG_RXKAD=y CONFIG_CFG80211=m CONFIG_MAC80211=m +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_DRA7XX_EP=y +CONFIG_PCI_ENDPOINT=y +CONFIG_PCI_ENDPOINT_CONFIGFS=y +CONFIG_PCI_EPF_TEST=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y @@ -132,13 +140,13 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_M25P80=m -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC_BCH=y -CONFIG_MTD_NAND_OMAP2=y -CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_OMAP2=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_NAND_ECC_SW_BCH=y +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_SPI_NOR=m CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y @@ -155,7 +163,6 @@ CONFIG_SATA_AHCI_PLATFORM=y CONFIG_AHCI_DM816=m CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CIRRUS is not set CONFIG_DM9000=y @@ -283,11 +290,9 @@ CONFIG_HWMON=m CONFIG_SENSORS_GPIO_FAN=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_TMP102=m -CONFIG_THERMAL=m CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_CPU_THERMAL=y -CONFIG_TI_SOC_THERMAL=m CONFIG_TI_THERMAL=y CONFIG_OMAP4_THERMAL=y CONFIG_OMAP5_THERMAL=y @@ -381,13 +386,12 @@ CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m -CONFIG_SND_SOC_TLV320AIC3X=m CONFIG_SND_SOC_DAVINCI_MCASP=m CONFIG_SND_SOC_NOKIA_RX51=m -CONFIG_SND_SOC_OMAP_HDMI=m -CONFIG_SND_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_SOC_OMAP3_PANDORA=m CONFIG_SND_SOC_OMAP3_TWL4030=m +CONFIG_SND_SOC_OMAP_ABE_TWL6040=m +CONFIG_SND_SOC_OMAP_HDMI=m CONFIG_SND_SOC_CPCAP=m CONFIG_SND_SOC_TLV320AIC23_I2C=m CONFIG_SND_SIMPLE_CARD=m @@ -475,8 +479,6 @@ CONFIG_RTC_DRV_PALMAS=m CONFIG_RTC_DRV_OMAP=m CONFIG_RTC_DRV_CPCAP=m CONFIG_DMADEVICES=y -CONFIG_DMA_OMAP=y -CONFIG_TI_EDMA=y CONFIG_OMAP_IOMMU=y CONFIG_REMOTEPROC=m CONFIG_OMAP_REMOTEPROC=m @@ -531,24 +533,8 @@ CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_INFO_SPLIT=y -CONFIG_DEBUG_INFO_DWARF4=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_SCHEDSTATS=y -CONFIG_PROVE_LOCKING=y -# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_SECURITY=y CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_ARM_CRYPTO=y -CONFIG_CRYPTO_SHA1_ARM_NEON=m -CONFIG_CRYPTO_SHA256_ARM=m -CONFIG_CRYPTO_SHA512_ARM=m -CONFIG_CRYPTO_AES_ARM=m -CONFIG_CRYPTO_AES_ARM_BS=m -CONFIG_CRYPTO_GHASH_ARM_CE=m -CONFIG_CRYPTO_CHACHA20_NEON=m CONFIG_CRC_CCITT=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y @@ -557,3 +543,10 @@ CONFIG_LIBCRC32C=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_SPLIT=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_SCHEDSTATS=y +# CONFIG_DEBUG_BUGVERBOSE is not set diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index bf9046331f6e..077e0fde1ff9 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -70,7 +70,7 @@ CONFIG_MTD_CFI_GEOMETRY=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_NAND_ORION=y CONFIG_BLK_DEV_LOOP=y diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig index f6ba32c9d173..cae0db6b4eaf 100644 --- a/arch/arm/configs/oxnas_v6_defconfig +++ b/arch/arm/configs/oxnas_v6_defconfig @@ -50,7 +50,7 @@ CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_OXNAS=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index 3e0de035ab77..7681eea60127 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig @@ -31,7 +31,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 6bb506edb1f5..07ebbdce3645 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -66,9 +66,6 @@ CONFIG_MACH_MIOA701=y CONFIG_PXA_EZX=y CONFIG_MACH_MP900C=y CONFIG_ARCH_PXA_PALM=y -CONFIG_MACH_RAUMFELD_RC=y -CONFIG_MACH_RAUMFELD_CONNECTOR=y -CONFIG_MACH_RAUMFELD_SPEAKER=y CONFIG_PXA_SHARPSL=y CONFIG_MACH_POODLE=y CONFIG_MACH_CORGI=y @@ -188,8 +185,8 @@ CONFIG_MTD_PXA2XX=m CONFIG_MTD_M25P80=m CONFIG_MTD_BLOCK2MTD=y CONFIG_MTD_DOCG3=m -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_ECC_BCH=y +CONFIG_MTD_RAW_NAND=m +CONFIG_MTD_NAND_ECC_SW_BCH=y CONFIG_MTD_NAND_GPIO=m CONFIG_MTD_NAND_DISKONCHIP=m CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y @@ -390,7 +387,7 @@ CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_NTC_THERMISTOR=m -CONFIG_THERMAL=m +CONFIG_THERMAL=y CONFIG_WATCHDOG=y CONFIG_XILINX_WATCHDOG=m CONFIG_SA1100_WATCHDOG=m @@ -482,7 +479,6 @@ CONFIG_SND_PCM_OSS=m CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y -CONFIG_SND_PXA2XX_AC97=m CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m CONFIG_SND_ATMEL_SOC=m @@ -498,7 +494,6 @@ CONFIG_SND_PXA2XX_SOC_E800=m CONFIG_SND_PXA2XX_SOC_EM_X270=m CONFIG_SND_PXA2XX_SOC_PALM27X=y CONFIG_SND_SOC_ZYLONITE=m -CONFIG_SND_SOC_RAUMFELD=m CONFIG_SND_PXA2XX_SOC_HX4700=m CONFIG_SND_PXA2XX_SOC_MAGICIAN=m CONFIG_SND_PXA2XX_SOC_MIOA701=m diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index bd6440f23493..c1854751c99a 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -50,14 +50,15 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set -CONFIG_CFG80211=y +CONFIG_CFG80211=m +CONFIG_MAC80211=m CONFIG_RFKILL=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y @@ -72,6 +73,8 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=m CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_ATL1C=y @@ -85,6 +88,7 @@ CONFIG_SLIP_MODE_SLIP6=y CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_WCN36XX=m CONFIG_BRCMFMAC=m CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -94,6 +98,8 @@ CONFIG_KEYBOARD_PMIC8XXX=y CONFIG_INPUT_JOYSTICK=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y +CONFIG_INPUT_MSM_VIBRATOR=m +CONFIG_INPUT_PM8941_PWRKEY=m CONFIG_INPUT_PM8XXX_VIBRATOR=y CONFIG_INPUT_PMIC8XXX_PWRKEY=y CONFIG_INPUT_UINPUT=y @@ -127,6 +133,7 @@ CONFIG_GPIO_SYSFS=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y CONFIG_CHARGER_QCOM_SMBB=y +CONFIG_CHARGER_BQ24190=m CONFIG_THERMAL=y CONFIG_QCOM_TSENS=y CONFIG_MFD_PM8XXX=y @@ -226,7 +233,11 @@ CONFIG_IIO=y CONFIG_IIO_BUFFER_CB=y CONFIG_IIO_SW_TRIGGER=y CONFIG_KXSD9=y +CONFIG_QCOM_SPMI_IADC=m +CONFIG_QCOM_SPMI_VADC=m CONFIG_MPU3050_I2C=y +CONFIG_INV_MPU6050_I2C=m +CONFIG_TSL2772=m CONFIG_AK8975=y CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_BMP280=y diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig deleted file mode 100644 index 2dd56e9a484e..000000000000 --- a/arch/arm/configs/raumfeld_defconfig +++ /dev/null @@ -1,197 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y -CONFIG_MACH_RAUMFELD_RC=y -CONFIG_MACH_RAUMFELD_CONNECTOR=y -CONFIG_MACH_RAUMFELD_SPEAKER=y -CONFIG_NO_HZ=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_CMDLINE="console=ttyS0,115200 rw" -CONFIG_CPU_FREQ=y -CONFIG_CPU_IDLE=y -CONFIG_PM=y -CONFIG_APM_EMULATION=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_SYN_COOKIES=y -CONFIG_IPV6=y -CONFIG_CFG80211=y -CONFIG_MAC80211=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_NFTL=y -CONFIG_NFTL_RW=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_MARVELL=y -CONFIG_MTD_UBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_ISL29003=y -CONFIG_IIO=y -CONFIG_AD5446=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -CONFIG_LIBERTAS=y -CONFIG_LIBERTAS_SDIO=m -CONFIG_USB_USBNET=y -# CONFIG_USB_NET_AX8817X is not set -# CONFIG_USB_NET_NET1080 is not set -CONFIG_USB_NET_MCS7830=y -# CONFIG_USB_NET_CDC_SUBSET is not set -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_EETI=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_GPIO_ROTARY_ENCODER=y -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_PXA=y -CONFIG_SPI=y -CONFIG_SPI_DEBUG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_SPIDEV=y -CONFIG_DEBUG_GPIO=y -CONFIG_W1_MASTER_GPIO=m -CONFIG_POWER_SUPPLY=y -CONFIG_PDA_POWER=y -CONFIG_BATTERY_DS2760=m -CONFIG_SENSORS_LIS3_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_DEBUG=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_MAX8660=y -CONFIG_FB=y -CONFIG_FB_PXA=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_BACKLIGHT_PWM=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_USB is not set -CONFIG_SND_SOC=y -CONFIG_SND_PXA2XX_SOC=y -CONFIG_SND_SOC_RAUMFELD=y -CONFIG_HID_DRAGONRISE=y -CONFIG_HID_GYRATION=y -CONFIG_HID_TWINHAN=y -CONFIG_HID_NTRIG=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_HID_GREENASIA=y -CONFIG_HID_SMARTJOYPLUS=y -CONFIG_HID_TOPSEED=y -CONFIG_HID_THRUSTMASTER=y -CONFIG_HID_ZEROPLUS=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_USBAT=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_MMC=y -CONFIG_MMC_PXA=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_LT3593=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_PXA=y -CONFIG_DMADEVICES=y -CONFIG_UIO=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_FSCACHE=y -CONFIG_FSCACHE_STATS=y -CONFIG_CACHEFILES=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_UBIFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NFS_FSCACHE=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=y -CONFIG_NLS_CODEPAGE_775=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_855=y -CONFIG_NLS_CODEPAGE_857=y -CONFIG_NLS_CODEPAGE_860=y -CONFIG_NLS_CODEPAGE_861=y -CONFIG_NLS_CODEPAGE_862=y -CONFIG_NLS_CODEPAGE_863=y -CONFIG_NLS_CODEPAGE_864=y -CONFIG_NLS_CODEPAGE_865=y -CONFIG_NLS_CODEPAGE_866=y -CONFIG_NLS_CODEPAGE_869=y -CONFIG_NLS_CODEPAGE_936=y -CONFIG_NLS_CODEPAGE_950=y -CONFIG_NLS_CODEPAGE_932=y -CONFIG_NLS_CODEPAGE_949=y -CONFIG_NLS_CODEPAGE_874=y -CONFIG_NLS_ISO8859_8=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_3=y -CONFIG_NLS_ISO8859_4=y -CONFIG_NLS_ISO8859_5=y -CONFIG_NLS_ISO8859_6=y -CONFIG_NLS_ISO8859_7=y -CONFIG_NLS_ISO8859_9=y -CONFIG_NLS_ISO8859_13=y -CONFIG_NLS_ISO8859_14=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_KOI8_R=y -CONFIG_NLS_KOI8_U=y -CONFIG_NLS_UTF8=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 2afb359f3168..39c648594d93 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -192,7 +192,7 @@ CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ROM=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_S3C2410=y CONFIG_PARPORT=y CONFIG_PARPORT_PC=m diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 507d7ad7523a..6e2656567da6 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -23,7 +23,7 @@ CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x5100 CONFIG_VFP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_S3C2410=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index a077597369f1..fd4f28aabda6 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -1,24 +1,30 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_CGROUPS=y CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y CONFIG_ARCH_S5PV210=y CONFIG_VMSPLIT_2G=y -CONFIG_PREEMPT=y CONFIG_ARM_APPENDED_DTB=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_VFP=y CONFIG_NEON=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_SOLARIS_X86_PARTITION=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -27,6 +33,11 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y +CONFIG_BT=m +CONFIG_BT_RFCOMM=y +CONFIG_BT_BNEP=y +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_BCM=y CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" @@ -44,21 +55,35 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PWM_VIBRA=m CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_DEV_BUS=y CONFIG_HW_RANDOM=y CONFIG_I2C_GPIO=y +CONFIG_I2C_S3C2410=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_SYSCON_POWEROFF=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_MAX17040=y # CONFIG_HWMON is not set CONFIG_MFD_MAX8998=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MAX8998=y +CONFIG_MEDIA_SUPPORT=m +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m +CONFIG_VIDEO_SAMSUNG_S5P_MFC=m CONFIG_DRM=y CONFIG_DRM_EXYNOS=y CONFIG_DRM_EXYNOS_FIMD=y CONFIG_DRM_EXYNOS_DPI=y +CONFIG_DRM_EXYNOS_ROTATOR=y CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_EHCI_HCD=y @@ -72,6 +97,9 @@ CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX8998=m +CONFIG_DMADEVICES=y +CONFIG_PWM=y +CONFIG_PWM_SAMSUNG=y CONFIG_PHY_SAMSUNG_USB2=m CONFIG_PHY_S5PV210_USB2=y CONFIG_EXT2_FS=y @@ -87,6 +115,7 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y +CONFIG_CRC_CCITT=y CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y @@ -96,7 +125,3 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_ATOMIC_SLEEP=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_S3C_UART1=y -CONFIG_EARLY_PRINTK=y -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index b0026f73083d..d5341b0bd88d 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -66,7 +66,7 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y @@ -150,7 +150,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y CONFIG_VIDEO_ATMEL_ISI=y -CONFIG_SOC_CAMERA_OV2640=y +CONFIG_SOC_CAMERA_OV2640=m CONFIG_DRM=y CONFIG_DRM_ATMEL_HLCDC=y CONFIG_DRM_PANEL_SIMPLE=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 9e5a5ade6cab..eb02ba9ec6e6 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -8,29 +8,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_ARCH_RENESAS=y -CONFIG_ARCH_EMEV2=y -CONFIG_ARCH_R7S72100=y -CONFIG_ARCH_R8A73A4=y -CONFIG_ARCH_R8A7740=y -CONFIG_ARCH_R8A7743=y -CONFIG_ARCH_R8A7744=y -CONFIG_ARCH_R8A7745=y -CONFIG_ARCH_R8A77470=y -CONFIG_ARCH_R8A7778=y -CONFIG_ARCH_R8A7779=y -CONFIG_ARCH_R8A7790=y -CONFIG_ARCH_R8A7791=y -CONFIG_ARCH_R8A7792=y -CONFIG_ARCH_R8A7793=y -CONFIG_ARCH_R8A7794=y -CONFIG_ARCH_R9A06G032=y -CONFIG_ARCH_SH73A0=y CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_754322=y -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCI_RCAR_GEN2=y -CONFIG_PCIE_RCAR=y CONFIG_SMP=y CONFIG_SCHED_MC=y CONFIG_NR_CPUS=8 @@ -58,13 +37,19 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_CAN=y CONFIG_CAN_RCAR=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PCIE_RCAR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=64 CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_EEPROM_AT24=y @@ -91,7 +76,6 @@ CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_SH_SCI=y CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MUX=y CONFIG_I2C_DEMUX_PINCTRL=y CONFIG_I2C_EMEV2=y CONFIG_I2C_GPIO=y @@ -104,6 +88,7 @@ CONFIG_SPI_RSPI=y CONFIG_SPI_SH_MSIOF=y CONFIG_SPI_SH_HSPI=y CONFIG_PINCTRL_RZA1=y +CONFIG_PINCTRL_RZA2=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_PCF857X=y @@ -140,7 +125,6 @@ CONFIG_VIDEO_ADV7604=y CONFIG_VIDEO_ML86V7667=y CONFIG_DRM=y CONFIG_DRM_RCAR_DU=y -CONFIG_DRM_RCAR_LVDS=y CONFIG_DRM_DUMB_VGA_DAC=y CONFIG_DRM_SII902X=y CONFIG_DRM_I2C_ADV7511=y @@ -158,12 +142,13 @@ CONFIG_SND_SOC_RCAR=y CONFIG_SND_SOC_AK4642=y CONFIG_SND_SOC_SGTL5000=y CONFIG_SND_SOC_WM8978=y -CONFIG_SND_SIMPLE_SCU_CARD=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PLATFORM=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_R8A66597_HCD=y CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_GADGET=y @@ -177,17 +162,35 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RS5C372=y +CONFIG_RTC_DRV_PCF85363=y CONFIG_RTC_DRV_BQ32K=y CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_RX8581=y CONFIG_RTC_DRV_DA9063=y CONFIG_DMADEVICES=y -CONFIG_SH_DMAE=y CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=y CONFIG_STAGING=y CONFIG_STAGING_BOARD=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_ARCH_EMEV2=y +CONFIG_ARCH_R7S72100=y +CONFIG_ARCH_R7S9210=y +CONFIG_ARCH_R8A73A4=y +CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7743=y +CONFIG_ARCH_R8A7744=y +CONFIG_ARCH_R8A7745=y +CONFIG_ARCH_R8A77470=y +CONFIG_ARCH_R8A7778=y +CONFIG_ARCH_R8A7779=y +CONFIG_ARCH_R8A7790=y +CONFIG_ARCH_R8A7791=y +CONFIG_ARCH_R8A7792=y +CONFIG_ARCH_R8A7793=y +CONFIG_ARCH_R8A7794=y +CONFIG_ARCH_R9A06G032=y +CONFIG_ARCH_SH73A0=y CONFIG_IIO=y CONFIG_AK8975=y CONFIG_PWM=y @@ -196,6 +199,7 @@ CONFIG_PWM_RENESAS_TPU=y CONFIG_RESET_CONTROLLER=y CONFIG_GENERIC_PHY=y CONFIG_PHY_RCAR_GEN2=y +CONFIG_PHY_RCAR_GEN3_USB2=y # CONFIG_DNOTIFY is not set CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y @@ -208,7 +212,8 @@ CONFIG_NFS_V4_1=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index 371fca4e1ab7..6701a975e785 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -9,27 +9,19 @@ CONFIG_NAMESPACES=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_SOCFPGA=y CONFIG_ARM_THUMBEE=y -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCIE_ALTERA=y -CONFIG_PCIE_ALTERA_MSI=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_VFP=y CONFIG_NEON=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -48,19 +40,23 @@ CONFIG_CAN=y CONFIG_CAN_C_CAN=y CONFIG_CAN_C_CAN_PLATFORM=y CONFIG_CAN_DEBUG_DEVICES=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCIE_ALTERA=y +CONFIG_PCIE_ALTERA_MSI=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_SPI_NOR=y # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set CONFIG_SPI_CADENCE_QUADSPI=y CONFIG_OF_OVERLAY=y -CONFIG_OF_CONFIGFS=y +CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=2 CONFIG_BLK_DEV_RAM_SIZE=8192 @@ -109,6 +105,7 @@ CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_WATCHDOG=y CONFIG_DW_WATCHDOG=y CONFIG_MFD_ALTERA_A10SR=y +CONFIG_MFD_ALTERA_SYSMGR=y CONFIG_MFD_STMPE=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -130,13 +127,15 @@ CONFIG_RTC_DRV_DS1307=y CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y CONFIG_DMATEST=m +CONFIG_IIO=y +CONFIG_LTC2497=y CONFIG_FPGA=y -CONFIG_FPGA_REGION=y CONFIG_FPGA_MGR_SOCFPGA=y CONFIG_FPGA_MGR_SOCFPGA_A10=y CONFIG_FPGA_BRIDGE=y CONFIG_SOCFPGA_FPGA_BRIDGE=y CONFIG_ALTERA_FREEZE_BRIDGE=y +CONFIG_FPGA_REGION=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig index 7b36eeb928bb..8ee3679ca8b2 100644 --- a/arch/arm/configs/spear13xx_defconfig +++ b/arch/arm/configs/spear13xx_defconfig @@ -32,7 +32,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_OF_PARTS=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig index 2c5e8df33191..ddd73b25f75e 100644 --- a/arch/arm/configs/spear3xx_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -17,7 +17,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_OF_PARTS=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 @@ -52,8 +52,10 @@ CONFIG_GPIO_PL061=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y +CONFIG_DRM=y +CONFIG_DRM_PL111=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig index 124c244d8df1..5b410f0a365b 100644 --- a/arch/arm/configs/spear6xx_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -14,7 +14,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_OF_PARTS=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 9ea82c118661..f6d2f674517c 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -84,7 +84,7 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_ROM=y CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_SHARPSL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_SD=y diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index ba805b757a8d..152321d2893e 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -13,7 +13,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EMBEDDED=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_SLUB_DEBUG is not set -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set @@ -80,7 +79,6 @@ CONFIG_EXT3_FS=y CONFIG_NLS=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/tango4_defconfig b/arch/arm/configs/tango4_defconfig index 68725d4eae45..68eb16e583ac 100644 --- a/arch/arm/configs/tango4_defconfig +++ b/arch/arm/configs/tango4_defconfig @@ -39,7 +39,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_TESTS=m CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_TANGO=y CONFIG_BLK_DEV_LOOP=y CONFIG_SCSI=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index c7b99ebf5fcf..8f5c6a5b444c 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -1,6 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y @@ -14,23 +15,9 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MSI=y -CONFIG_PCI_TEGRA=y CONFIG_SMP=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_CMA=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_KEXEC=y @@ -40,6 +27,13 @@ CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_TRUSTED_FOUNDATIONS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -73,10 +67,12 @@ CONFIG_MAC80211=y CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=y +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_MSI=y +CONFIG_PCI_TEGRA=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=64 CONFIG_TEGRA_GMI=y CONFIG_MTD=y CONFIG_MTD_M25P80=y @@ -152,7 +148,6 @@ CONFIG_WATCHDOG=y CONFIG_TEGRA_WATCHDOG=y CONFIG_MFD_AS3722=y CONFIG_MFD_CROS_EC=y -CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX8907=y CONFIG_MFD_STMPE=y CONFIG_MFD_PALMAS=y @@ -180,6 +175,7 @@ CONFIG_DRM_NOUVEAU=m CONFIG_DRM_TEGRA=y CONFIG_DRM_PANEL_SIMPLE=y # CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -288,6 +284,10 @@ CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRC_CCITT=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y @@ -300,5 +300,3 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 2b5a224d2da1..ecad22501b48 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -76,7 +76,7 @@ CONFIG_MTD_DOC2001PLUS=y CONFIG_MTD_DOCPROBE_ADVANCED=y CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000 CONFIG_MTD_DOCPROBE_HIGH=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DISKONCHIP=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000 diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 36d77406e31b..bedf397c75de 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -9,7 +9,6 @@ CONFIG_EXPERT=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y # CONFIG_IOSCHED_CFQ is not set @@ -27,7 +26,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_NAND=y +CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_FSMC=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index 392ed3b3613c..484d77a7f589 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -14,7 +14,6 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set diff --git a/arch/arm/crypto/aes-ce-core.S b/arch/arm/crypto/aes-ce-core.S index ba8e6a32fdc9..caac519d6249 100644 --- a/arch/arm/crypto/aes-ce-core.S +++ b/arch/arm/crypto/aes-ce-core.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * aes-ce-core.S - AES in CBC/CTR/XTS mode using ARMv8 Crypto Extensions * * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> @@ -317,25 +314,27 @@ ENTRY(ce_aes_ctr_encrypt) .Lctrloop: vmov q0, q6 bl aes_encrypt - subs r4, r4, #1 - bmi .Lctrtailblock @ blocks < 0 means tail block - vld1.8 {q3}, [r1]! - veor q3, q0, q3 - vst1.8 {q3}, [r0]! adds r6, r6, #1 @ increment BE ctr rev ip, r6 vmov s27, ip bcs .Lctrcarry - teq r4, #0 + +.Lctrcarrydone: + subs r4, r4, #1 + bmi .Lctrtailblock @ blocks < 0 means tail block + vld1.8 {q3}, [r1]! + veor q3, q0, q3 + vst1.8 {q3}, [r0]! bne .Lctrloop + .Lctrout: - vst1.8 {q6}, [r5] + vst1.8 {q6}, [r5] @ return next CTR value pop {r4-r6, pc} .Lctrtailblock: - vst1.8 {q0}, [r0, :64] @ return just the key stream - pop {r4-r6, pc} + vst1.8 {q0}, [r0, :64] @ return the key stream + b .Lctrout .Lctrcarry: .irp sreg, s26, s25, s24 @@ -344,11 +343,9 @@ ENTRY(ce_aes_ctr_encrypt) adds ip, ip, #1 rev ip, ip vmov \sreg, ip - bcc 0f + bcc .Lctrcarrydone .endr -0: teq r4, #0 - beq .Lctrout - b .Lctrloop + b .Lctrcarrydone ENDPROC(ce_aes_ctr_encrypt) /* diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index 5affb8482379..620aacf0d128 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * aes-ce-glue.c - wrapper code for ARMv8 AES * * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <asm/hwcap.h> diff --git a/arch/arm/crypto/aes-cipher-core.S b/arch/arm/crypto/aes-cipher-core.S index f2d67c095e59..4460ed05d6ff 100644 --- a/arch/arm/crypto/aes-cipher-core.S +++ b/arch/arm/crypto/aes-cipher-core.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Scalar AES core transform * * Copyright (C) 2017 Linaro Ltd. * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/crypto/aes-cipher-glue.c b/arch/arm/crypto/aes-cipher-glue.c index c222f6e072ad..128d0a1ac068 100644 --- a/arch/arm/crypto/aes-cipher-glue.c +++ b/arch/arm/crypto/aes-cipher-glue.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Scalar AES core transform * * Copyright (C) 2017 Linaro Ltd. * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <crypto/aes.h> diff --git a/arch/arm/crypto/aes-neonbs-core.S b/arch/arm/crypto/aes-neonbs-core.S index 2b625c6d4712..d3eab76b6e1b 100644 --- a/arch/arm/crypto/aes-neonbs-core.S +++ b/arch/arm/crypto/aes-neonbs-core.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Bit sliced AES using NEON instructions * * Copyright (C) 2017 Linaro Ltd. * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c index 07e31941dc67..bd0bee9c8f7b 100644 --- a/arch/arm/crypto/aes-neonbs-glue.c +++ b/arch/arm/crypto/aes-neonbs-glue.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Bit sliced AES using NEON instructions * * Copyright (C) 2017 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <asm/neon.h> @@ -278,6 +275,8 @@ static int __xts_crypt(struct skcipher_request *req, int err; err = skcipher_walk_virt(&walk, req, true); + if (err) + return err; crypto_cipher_encrypt_one(ctx->tweak_tfm, walk.iv, walk.iv); diff --git a/arch/arm/crypto/chacha-neon-glue.c b/arch/arm/crypto/chacha-neon-glue.c index 9d6fda81986d..48a89537b828 100644 --- a/arch/arm/crypto/chacha-neon-glue.c +++ b/arch/arm/crypto/chacha-neon-glue.c @@ -21,6 +21,7 @@ #include <crypto/algapi.h> #include <crypto/chacha.h> +#include <crypto/internal/simd.h> #include <crypto/internal/skcipher.h> #include <linux/kernel.h> #include <linux/module.h> @@ -93,7 +94,7 @@ static int chacha_neon(struct skcipher_request *req) struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm); - if (req->cryptlen <= CHACHA_BLOCK_SIZE || !may_use_simd()) + if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable()) return crypto_chacha_crypt(req); return chacha_neon_stream_xor(req, ctx, req->iv); @@ -107,7 +108,7 @@ static int xchacha_neon(struct skcipher_request *req) u32 state[16]; u8 real_iv[16]; - if (req->cryptlen <= CHACHA_BLOCK_SIZE || !may_use_simd()) + if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable()) return crypto_xchacha_crypt(req); crypto_chacha_init(state, ctx, req->iv); diff --git a/arch/arm/crypto/crc32-ce-glue.c b/arch/arm/crypto/crc32-ce-glue.c index cd9e93b46c2d..95592499b9bd 100644 --- a/arch/arm/crypto/crc32-ce-glue.c +++ b/arch/arm/crypto/crc32-ce-glue.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Accelerated CRC32(C) using ARM CRC, NEON and Crypto Extensions instructions * * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/cpufeature.h> @@ -16,6 +13,7 @@ #include <linux/string.h> #include <crypto/internal/hash.h> +#include <crypto/internal/simd.h> #include <asm/hwcap.h> #include <asm/neon.h> @@ -113,7 +111,7 @@ static int crc32_pmull_update(struct shash_desc *desc, const u8 *data, u32 *crc = shash_desc_ctx(desc); unsigned int l; - if (may_use_simd()) { + if (crypto_simd_usable()) { if ((u32)data % SCALE_F) { l = min_t(u32, length, SCALE_F - ((u32)data % SCALE_F)); @@ -147,7 +145,7 @@ static int crc32c_pmull_update(struct shash_desc *desc, const u8 *data, u32 *crc = shash_desc_ctx(desc); unsigned int l; - if (may_use_simd()) { + if (crypto_simd_usable()) { if ((u32)data % SCALE_F) { l = min_t(u32, length, SCALE_F - ((u32)data % SCALE_F)); diff --git a/arch/arm/crypto/crct10dif-ce-core.S b/arch/arm/crypto/crct10dif-ce-core.S index ce45ba0c0687..86be258a803f 100644 --- a/arch/arm/crypto/crct10dif-ce-core.S +++ b/arch/arm/crypto/crct10dif-ce-core.S @@ -2,12 +2,14 @@ // Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions instructions // // Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org> +// Copyright (C) 2019 Google LLC <ebiggers@google.com> // // This program is free software; you can redistribute it and/or modify // it under the terms of the GNU General Public License version 2 as // published by the Free Software Foundation. // +// Derived from the x86 version: // // Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions // @@ -54,19 +56,11 @@ // NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS // SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // -// Function API: -// UINT16 crc_t10dif_pcl( -// UINT16 init_crc, //initial CRC value, 16 bits -// const unsigned char *buf, //buffer pointer to calculate CRC on -// UINT64 len //buffer length in bytes (64-bit data) -// ); -// // Reference paper titled "Fast CRC Computation for Generic // Polynomials Using PCLMULQDQ Instruction" // URL: http://www.intel.com/content/dam/www/public/us/en/documents // /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf // -// #include <linux/linkage.h> #include <asm/assembler.h> @@ -78,13 +72,14 @@ #endif .text + .arch armv7-a .fpu crypto-neon-fp-armv8 - arg1_low32 .req r0 - arg2 .req r1 - arg3 .req r2 + init_crc .req r0 + buf .req r1 + len .req r2 - qzr .req q13 + fold_consts_ptr .req ip q0l .req d0 q0h .req d1 @@ -102,82 +97,35 @@ q6h .req d13 q7l .req d14 q7h .req d15 - -ENTRY(crc_t10dif_pmull) - vmov.i8 qzr, #0 // init zero register - - // adjust the 16-bit initial_crc value, scale it to 32 bits - lsl arg1_low32, arg1_low32, #16 - - // check if smaller than 256 - cmp arg3, #256 - - // for sizes less than 128, we can't fold 64B at a time... - blt _less_than_128 - - // load the initial crc value - // crc value does not need to be byte-reflected, but it needs - // to be moved to the high part of the register. - // because data will be byte-reflected and will align with - // initial crc at correct place. - vmov s0, arg1_low32 // initial crc - vext.8 q10, qzr, q0, #4 - - // receive the initial 64B data, xor the initial crc value - vld1.64 {q0-q1}, [arg2, :128]! - vld1.64 {q2-q3}, [arg2, :128]! - vld1.64 {q4-q5}, [arg2, :128]! - vld1.64 {q6-q7}, [arg2, :128]! -CPU_LE( vrev64.8 q0, q0 ) -CPU_LE( vrev64.8 q1, q1 ) -CPU_LE( vrev64.8 q2, q2 ) -CPU_LE( vrev64.8 q3, q3 ) -CPU_LE( vrev64.8 q4, q4 ) -CPU_LE( vrev64.8 q5, q5 ) -CPU_LE( vrev64.8 q6, q6 ) -CPU_LE( vrev64.8 q7, q7 ) - - vswp d0, d1 - vswp d2, d3 - vswp d4, d5 - vswp d6, d7 - vswp d8, d9 - vswp d10, d11 - vswp d12, d13 - vswp d14, d15 - - // XOR the initial_crc value - veor.8 q0, q0, q10 - - adr ip, rk3 - vld1.64 {q10}, [ip, :128] // xmm10 has rk3 and rk4 - - // - // we subtract 256 instead of 128 to save one instruction from the loop - // - sub arg3, arg3, #256 - - // at this section of the code, there is 64*x+y (0<=y<64) bytes of - // buffer. The _fold_64_B_loop will fold 64B at a time - // until we have 64+y Bytes of buffer - - - // fold 64B at a time. This section of the code folds 4 vector - // registers in parallel -_fold_64_B_loop: - - .macro fold64, reg1, reg2 - vld1.64 {q11-q12}, [arg2, :128]! - - vmull.p64 q8, \reg1\()h, d21 - vmull.p64 \reg1, \reg1\()l, d20 - vmull.p64 q9, \reg2\()h, d21 - vmull.p64 \reg2, \reg2\()l, d20 - -CPU_LE( vrev64.8 q11, q11 ) -CPU_LE( vrev64.8 q12, q12 ) - vswp d22, d23 - vswp d24, d25 + q8l .req d16 + q8h .req d17 + q9l .req d18 + q9h .req d19 + q10l .req d20 + q10h .req d21 + q11l .req d22 + q11h .req d23 + q12l .req d24 + q12h .req d25 + + FOLD_CONSTS .req q10 + FOLD_CONST_L .req q10l + FOLD_CONST_H .req q10h + + // Fold reg1, reg2 into the next 32 data bytes, storing the result back + // into reg1, reg2. + .macro fold_32_bytes, reg1, reg2 + vld1.64 {q11-q12}, [buf]! + + vmull.p64 q8, \reg1\()h, FOLD_CONST_H + vmull.p64 \reg1, \reg1\()l, FOLD_CONST_L + vmull.p64 q9, \reg2\()h, FOLD_CONST_H + vmull.p64 \reg2, \reg2\()l, FOLD_CONST_L + +CPU_LE( vrev64.8 q11, q11 ) +CPU_LE( vrev64.8 q12, q12 ) + vswp q11l, q11h + vswp q12l, q12h veor.8 \reg1, \reg1, q8 veor.8 \reg2, \reg2, q9 @@ -185,242 +133,248 @@ CPU_LE( vrev64.8 q12, q12 ) veor.8 \reg2, \reg2, q12 .endm - fold64 q0, q1 - fold64 q2, q3 - fold64 q4, q5 - fold64 q6, q7 - - subs arg3, arg3, #128 - - // check if there is another 64B in the buffer to be able to fold - bge _fold_64_B_loop - - // at this point, the buffer pointer is pointing at the last y Bytes - // of the buffer the 64B of folded data is in 4 of the vector - // registers: v0, v1, v2, v3 - - // fold the 8 vector registers to 1 vector register with different - // constants - - adr ip, rk9 - vld1.64 {q10}, [ip, :128]! - - .macro fold16, reg, rk - vmull.p64 q8, \reg\()l, d20 - vmull.p64 \reg, \reg\()h, d21 - .ifnb \rk - vld1.64 {q10}, [ip, :128]! + // Fold src_reg into dst_reg, optionally loading the next fold constants + .macro fold_16_bytes, src_reg, dst_reg, load_next_consts + vmull.p64 q8, \src_reg\()l, FOLD_CONST_L + vmull.p64 \src_reg, \src_reg\()h, FOLD_CONST_H + .ifnb \load_next_consts + vld1.64 {FOLD_CONSTS}, [fold_consts_ptr, :128]! .endif - veor.8 q7, q7, q8 - veor.8 q7, q7, \reg + veor.8 \dst_reg, \dst_reg, q8 + veor.8 \dst_reg, \dst_reg, \src_reg .endm - fold16 q0, rk11 - fold16 q1, rk13 - fold16 q2, rk15 - fold16 q3, rk17 - fold16 q4, rk19 - fold16 q5, rk1 - fold16 q6 - - // instead of 64, we add 48 to the loop counter to save 1 instruction - // from the loop instead of a cmp instruction, we use the negative - // flag with the jl instruction - adds arg3, arg3, #(128-16) - blt _final_reduction_for_128 - - // now we have 16+y bytes left to reduce. 16 Bytes is in register v7 - // and the rest is in memory. We can fold 16 bytes at a time if y>=16 - // continue folding 16B at a time - -_16B_reduction_loop: - vmull.p64 q8, d14, d20 - vmull.p64 q7, d15, d21 - veor.8 q7, q7, q8 + .macro __adrl, out, sym + movw \out, #:lower16:\sym + movt \out, #:upper16:\sym + .endm - vld1.64 {q0}, [arg2, :128]! -CPU_LE( vrev64.8 q0, q0 ) - vswp d0, d1 - veor.8 q7, q7, q0 - subs arg3, arg3, #16 - - // instead of a cmp instruction, we utilize the flags with the - // jge instruction equivalent of: cmp arg3, 16-16 - // check if there is any more 16B in the buffer to be able to fold - bge _16B_reduction_loop - - // now we have 16+z bytes left to reduce, where 0<= z < 16. - // first, we reduce the data in the xmm7 register - -_final_reduction_for_128: - // check if any more data to fold. If not, compute the CRC of - // the final 128 bits - adds arg3, arg3, #16 - beq _128_done - - // here we are getting data that is less than 16 bytes. - // since we know that there was data before the pointer, we can - // offset the input pointer before the actual point, to receive - // exactly 16 bytes. after that the registers need to be adjusted. -_get_last_two_regs: - add arg2, arg2, arg3 - sub arg2, arg2, #16 - vld1.64 {q1}, [arg2] -CPU_LE( vrev64.8 q1, q1 ) - vswp d2, d3 - - // get rid of the extra data that was loaded before - // load the shift constant - adr ip, tbl_shf_table + 16 - sub ip, ip, arg3 - vld1.8 {q0}, [ip] - - // shift v2 to the left by arg3 bytes - vtbl.8 d4, {d14-d15}, d0 - vtbl.8 d5, {d14-d15}, d1 - - // shift v7 to the right by 16-arg3 bytes - vmov.i8 q9, #0x80 - veor.8 q0, q0, q9 - vtbl.8 d18, {d14-d15}, d0 - vtbl.8 d19, {d14-d15}, d1 - - // blend - vshr.s8 q0, q0, #7 // convert to 8-bit mask - vbsl.8 q0, q2, q1 - - // fold 16 Bytes - vmull.p64 q8, d18, d20 - vmull.p64 q7, d19, d21 +// +// u16 crc_t10dif_pmull(u16 init_crc, const u8 *buf, size_t len); +// +// Assumes len >= 16. +// +ENTRY(crc_t10dif_pmull) + + // For sizes less than 256 bytes, we can't fold 128 bytes at a time. + cmp len, #256 + blt .Lless_than_256_bytes + + __adrl fold_consts_ptr, .Lfold_across_128_bytes_consts + + // Load the first 128 data bytes. Byte swapping is necessary to make + // the bit order match the polynomial coefficient order. + vld1.64 {q0-q1}, [buf]! + vld1.64 {q2-q3}, [buf]! + vld1.64 {q4-q5}, [buf]! + vld1.64 {q6-q7}, [buf]! +CPU_LE( vrev64.8 q0, q0 ) +CPU_LE( vrev64.8 q1, q1 ) +CPU_LE( vrev64.8 q2, q2 ) +CPU_LE( vrev64.8 q3, q3 ) +CPU_LE( vrev64.8 q4, q4 ) +CPU_LE( vrev64.8 q5, q5 ) +CPU_LE( vrev64.8 q6, q6 ) +CPU_LE( vrev64.8 q7, q7 ) + vswp q0l, q0h + vswp q1l, q1h + vswp q2l, q2h + vswp q3l, q3h + vswp q4l, q4h + vswp q5l, q5h + vswp q6l, q6h + vswp q7l, q7h + + // XOR the first 16 data *bits* with the initial CRC value. + vmov.i8 q8h, #0 + vmov.u16 q8h[3], init_crc + veor q0h, q0h, q8h + + // Load the constants for folding across 128 bytes. + vld1.64 {FOLD_CONSTS}, [fold_consts_ptr, :128]! + + // Subtract 128 for the 128 data bytes just consumed. Subtract another + // 128 to simplify the termination condition of the following loop. + sub len, len, #256 + + // While >= 128 data bytes remain (not counting q0-q7), fold the 128 + // bytes q0-q7 into them, storing the result back into q0-q7. +.Lfold_128_bytes_loop: + fold_32_bytes q0, q1 + fold_32_bytes q2, q3 + fold_32_bytes q4, q5 + fold_32_bytes q6, q7 + subs len, len, #128 + bge .Lfold_128_bytes_loop + + // Now fold the 112 bytes in q0-q6 into the 16 bytes in q7. + + // Fold across 64 bytes. + vld1.64 {FOLD_CONSTS}, [fold_consts_ptr, :128]! + fold_16_bytes q0, q4 + fold_16_bytes q1, q5 + fold_16_bytes q2, q6 + fold_16_bytes q3, q7, 1 + // Fold across 32 bytes. + fold_16_bytes q4, q6 + fold_16_bytes q5, q7, 1 + // Fold across 16 bytes. + fold_16_bytes q6, q7 + + // Add 128 to get the correct number of data bytes remaining in 0...127 + // (not counting q7), following the previous extra subtraction by 128. + // Then subtract 16 to simplify the termination condition of the + // following loop. + adds len, len, #(128-16) + + // While >= 16 data bytes remain (not counting q7), fold the 16 bytes q7 + // into them, storing the result back into q7. + blt .Lfold_16_bytes_loop_done +.Lfold_16_bytes_loop: + vmull.p64 q8, q7l, FOLD_CONST_L + vmull.p64 q7, q7h, FOLD_CONST_H veor.8 q7, q7, q8 + vld1.64 {q0}, [buf]! +CPU_LE( vrev64.8 q0, q0 ) + vswp q0l, q0h veor.8 q7, q7, q0 - -_128_done: - // compute crc of a 128-bit value - vldr d20, rk5 - vldr d21, rk6 // rk5 and rk6 in xmm10 - - // 64b fold - vext.8 q0, qzr, q7, #8 - vmull.p64 q7, d15, d20 + subs len, len, #16 + bge .Lfold_16_bytes_loop + +.Lfold_16_bytes_loop_done: + // Add 16 to get the correct number of data bytes remaining in 0...15 + // (not counting q7), following the previous extra subtraction by 16. + adds len, len, #16 + beq .Lreduce_final_16_bytes + +.Lhandle_partial_segment: + // Reduce the last '16 + len' bytes where 1 <= len <= 15 and the first + // 16 bytes are in q7 and the rest are the remaining data in 'buf'. To + // do this without needing a fold constant for each possible 'len', + // redivide the bytes into a first chunk of 'len' bytes and a second + // chunk of 16 bytes, then fold the first chunk into the second. + + // q0 = last 16 original data bytes + add buf, buf, len + sub buf, buf, #16 + vld1.64 {q0}, [buf] +CPU_LE( vrev64.8 q0, q0 ) + vswp q0l, q0h + + // q1 = high order part of second chunk: q7 left-shifted by 'len' bytes. + __adrl r3, .Lbyteshift_table + 16 + sub r3, r3, len + vld1.8 {q2}, [r3] + vtbl.8 q1l, {q7l-q7h}, q2l + vtbl.8 q1h, {q7l-q7h}, q2h + + // q3 = first chunk: q7 right-shifted by '16-len' bytes. + vmov.i8 q3, #0x80 + veor.8 q2, q2, q3 + vtbl.8 q3l, {q7l-q7h}, q2l + vtbl.8 q3h, {q7l-q7h}, q2h + + // Convert to 8-bit masks: 'len' 0x00 bytes, then '16-len' 0xff bytes. + vshr.s8 q2, q2, #7 + + // q2 = second chunk: 'len' bytes from q0 (low-order bytes), + // then '16-len' bytes from q1 (high-order bytes). + vbsl.8 q2, q1, q0 + + // Fold the first chunk into the second chunk, storing the result in q7. + vmull.p64 q0, q3l, FOLD_CONST_L + vmull.p64 q7, q3h, FOLD_CONST_H veor.8 q7, q7, q0 + veor.8 q7, q7, q2 + +.Lreduce_final_16_bytes: + // Reduce the 128-bit value M(x), stored in q7, to the final 16-bit CRC. + + // Load 'x^48 * (x^48 mod G(x))' and 'x^48 * (x^80 mod G(x))'. + vld1.64 {FOLD_CONSTS}, [fold_consts_ptr, :128]! + + // Fold the high 64 bits into the low 64 bits, while also multiplying by + // x^64. This produces a 128-bit value congruent to x^64 * M(x) and + // whose low 48 bits are 0. + vmull.p64 q0, q7h, FOLD_CONST_H // high bits * x^48 * (x^80 mod G(x)) + veor.8 q0h, q0h, q7l // + low bits * x^64 + + // Fold the high 32 bits into the low 96 bits. This produces a 96-bit + // value congruent to x^64 * M(x) and whose low 48 bits are 0. + vmov.i8 q1, #0 + vmov s4, s3 // extract high 32 bits + vmov s3, s5 // zero high 32 bits + vmull.p64 q1, q1l, FOLD_CONST_L // high 32 bits * x^48 * (x^48 mod G(x)) + veor.8 q0, q0, q1 // + low bits + + // Load G(x) and floor(x^48 / G(x)). + vld1.64 {FOLD_CONSTS}, [fold_consts_ptr, :128] + + // Use Barrett reduction to compute the final CRC value. + vmull.p64 q1, q0h, FOLD_CONST_H // high 32 bits * floor(x^48 / G(x)) + vshr.u64 q1l, q1l, #32 // /= x^32 + vmull.p64 q1, q1l, FOLD_CONST_L // *= G(x) + vshr.u64 q0l, q0l, #48 + veor.8 q0l, q0l, q1l // + low 16 nonzero bits + // Final CRC value (x^16 * M(x)) mod G(x) is in low 16 bits of q0. + + vmov.u16 r0, q0l[0] + bx lr - // 32b fold - vext.8 q0, q7, qzr, #12 - vmov s31, s3 - vmull.p64 q0, d0, d21 - veor.8 q7, q0, q7 - - // barrett reduction -_barrett: - vldr d20, rk7 - vldr d21, rk8 - - vmull.p64 q0, d15, d20 - vext.8 q0, qzr, q0, #12 - vmull.p64 q0, d1, d21 - vext.8 q0, qzr, q0, #12 - veor.8 q7, q7, q0 - vmov r0, s29 +.Lless_than_256_bytes: + // Checksumming a buffer of length 16...255 bytes -_cleanup: - // scale the result back to 16 bits - lsr r0, r0, #16 - bx lr + __adrl fold_consts_ptr, .Lfold_across_16_bytes_consts -_less_than_128: - teq arg3, #0 - beq _cleanup + // Load the first 16 data bytes. + vld1.64 {q7}, [buf]! +CPU_LE( vrev64.8 q7, q7 ) + vswp q7l, q7h - vmov.i8 q0, #0 - vmov s3, arg1_low32 // get the initial crc value + // XOR the first 16 data *bits* with the initial CRC value. + vmov.i8 q0h, #0 + vmov.u16 q0h[3], init_crc + veor.8 q7h, q7h, q0h - vld1.64 {q7}, [arg2, :128]! -CPU_LE( vrev64.8 q7, q7 ) - vswp d14, d15 - veor.8 q7, q7, q0 + // Load the fold-across-16-bytes constants. + vld1.64 {FOLD_CONSTS}, [fold_consts_ptr, :128]! - cmp arg3, #16 - beq _128_done // exactly 16 left - blt _less_than_16_left - - // now if there is, load the constants - vldr d20, rk1 - vldr d21, rk2 // rk1 and rk2 in xmm10 - - // check if there is enough buffer to be able to fold 16B at a time - subs arg3, arg3, #32 - addlt arg3, arg3, #16 - blt _get_last_two_regs - b _16B_reduction_loop - -_less_than_16_left: - // shl r9, 4 - adr ip, tbl_shf_table + 16 - sub ip, ip, arg3 - vld1.8 {q0}, [ip] - vmov.i8 q9, #0x80 - veor.8 q0, q0, q9 - vtbl.8 d18, {d14-d15}, d0 - vtbl.8 d15, {d14-d15}, d1 - vmov d14, d18 - b _128_done + cmp len, #16 + beq .Lreduce_final_16_bytes // len == 16 + subs len, len, #32 + addlt len, len, #16 + blt .Lhandle_partial_segment // 17 <= len <= 31 + b .Lfold_16_bytes_loop // 32 <= len <= 255 ENDPROC(crc_t10dif_pmull) -// precomputed constants -// these constants are precomputed from the poly: -// 0x8bb70000 (0x8bb7 scaled to 32 bits) + .section ".rodata", "a" .align 4 -// Q = 0x18BB70000 -// rk1 = 2^(32*3) mod Q << 32 -// rk2 = 2^(32*5) mod Q << 32 -// rk3 = 2^(32*15) mod Q << 32 -// rk4 = 2^(32*17) mod Q << 32 -// rk5 = 2^(32*3) mod Q << 32 -// rk6 = 2^(32*2) mod Q << 32 -// rk7 = floor(2^64/Q) -// rk8 = Q - -rk3: .quad 0x9d9d000000000000 -rk4: .quad 0x7cf5000000000000 -rk5: .quad 0x2d56000000000000 -rk6: .quad 0x1368000000000000 -rk7: .quad 0x00000001f65a57f8 -rk8: .quad 0x000000018bb70000 -rk9: .quad 0xceae000000000000 -rk10: .quad 0xbfd6000000000000 -rk11: .quad 0x1e16000000000000 -rk12: .quad 0x713c000000000000 -rk13: .quad 0xf7f9000000000000 -rk14: .quad 0x80a6000000000000 -rk15: .quad 0x044c000000000000 -rk16: .quad 0xe658000000000000 -rk17: .quad 0xad18000000000000 -rk18: .quad 0xa497000000000000 -rk19: .quad 0x6ee3000000000000 -rk20: .quad 0xe7b5000000000000 -rk1: .quad 0x2d56000000000000 -rk2: .quad 0x06df000000000000 - -tbl_shf_table: -// use these values for shift constants for the tbl/tbx instruction -// different alignments result in values as shown: -// DDQ 0x008f8e8d8c8b8a898887868584838281 # shl 15 (16-1) / shr1 -// DDQ 0x01008f8e8d8c8b8a8988878685848382 # shl 14 (16-3) / shr2 -// DDQ 0x0201008f8e8d8c8b8a89888786858483 # shl 13 (16-4) / shr3 -// DDQ 0x030201008f8e8d8c8b8a898887868584 # shl 12 (16-4) / shr4 -// DDQ 0x04030201008f8e8d8c8b8a8988878685 # shl 11 (16-5) / shr5 -// DDQ 0x0504030201008f8e8d8c8b8a89888786 # shl 10 (16-6) / shr6 -// DDQ 0x060504030201008f8e8d8c8b8a898887 # shl 9 (16-7) / shr7 -// DDQ 0x07060504030201008f8e8d8c8b8a8988 # shl 8 (16-8) / shr8 -// DDQ 0x0807060504030201008f8e8d8c8b8a89 # shl 7 (16-9) / shr9 -// DDQ 0x090807060504030201008f8e8d8c8b8a # shl 6 (16-10) / shr10 -// DDQ 0x0a090807060504030201008f8e8d8c8b # shl 5 (16-11) / shr11 -// DDQ 0x0b0a090807060504030201008f8e8d8c # shl 4 (16-12) / shr12 -// DDQ 0x0c0b0a090807060504030201008f8e8d # shl 3 (16-13) / shr13 -// DDQ 0x0d0c0b0a090807060504030201008f8e # shl 2 (16-14) / shr14 -// DDQ 0x0e0d0c0b0a090807060504030201008f # shl 1 (16-15) / shr15 +// Fold constants precomputed from the polynomial 0x18bb7 +// G(x) = x^16 + x^15 + x^11 + x^9 + x^8 + x^7 + x^5 + x^4 + x^2 + x^1 + x^0 +.Lfold_across_128_bytes_consts: + .quad 0x0000000000006123 // x^(8*128) mod G(x) + .quad 0x0000000000002295 // x^(8*128+64) mod G(x) +// .Lfold_across_64_bytes_consts: + .quad 0x0000000000001069 // x^(4*128) mod G(x) + .quad 0x000000000000dd31 // x^(4*128+64) mod G(x) +// .Lfold_across_32_bytes_consts: + .quad 0x000000000000857d // x^(2*128) mod G(x) + .quad 0x0000000000007acc // x^(2*128+64) mod G(x) +.Lfold_across_16_bytes_consts: + .quad 0x000000000000a010 // x^(1*128) mod G(x) + .quad 0x0000000000001faa // x^(1*128+64) mod G(x) +// .Lfinal_fold_consts: + .quad 0x1368000000000000 // x^48 * (x^48 mod G(x)) + .quad 0x2d56000000000000 // x^48 * (x^80 mod G(x)) +// .Lbarrett_reduction_consts: + .quad 0x0000000000018bb7 // G(x) + .quad 0x00000001f65a57f8 // floor(x^48 / G(x)) + +// For 1 <= len <= 15, the 16-byte vector beginning at &byteshift_table[16 - +// len] is the index vector to shift left by 'len' bytes, and is also {0x80, +// ..., 0x80} XOR the index vector to shift right by '16 - len' bytes. +.Lbyteshift_table: .byte 0x0, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87 .byte 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f .byte 0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 diff --git a/arch/arm/crypto/crct10dif-ce-glue.c b/arch/arm/crypto/crct10dif-ce-glue.c index d428355cf38d..e9191a8c87b9 100644 --- a/arch/arm/crypto/crct10dif-ce-glue.c +++ b/arch/arm/crypto/crct10dif-ce-glue.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions instructions * * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/crc-t10dif.h> @@ -15,13 +12,14 @@ #include <linux/string.h> #include <crypto/internal/hash.h> +#include <crypto/internal/simd.h> #include <asm/neon.h> #include <asm/simd.h> #define CRC_T10DIF_PMULL_CHUNK_SIZE 16U -asmlinkage u16 crc_t10dif_pmull(u16 init_crc, const u8 buf[], u32 len); +asmlinkage u16 crc_t10dif_pmull(u16 init_crc, const u8 *buf, size_t len); static int crct10dif_init(struct shash_desc *desc) { @@ -35,26 +33,15 @@ static int crct10dif_update(struct shash_desc *desc, const u8 *data, unsigned int length) { u16 *crc = shash_desc_ctx(desc); - unsigned int l; - if (!may_use_simd()) { - *crc = crc_t10dif_generic(*crc, data, length); + if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE && crypto_simd_usable()) { + kernel_neon_begin(); + *crc = crc_t10dif_pmull(*crc, data, length); + kernel_neon_end(); } else { - if (unlikely((u32)data % CRC_T10DIF_PMULL_CHUNK_SIZE)) { - l = min_t(u32, length, CRC_T10DIF_PMULL_CHUNK_SIZE - - ((u32)data % CRC_T10DIF_PMULL_CHUNK_SIZE)); - - *crc = crc_t10dif_generic(*crc, data, l); - - length -= l; - data += l; - } - if (length > 0) { - kernel_neon_begin(); - *crc = crc_t10dif_pmull(*crc, data, length); - kernel_neon_end(); - } + *crc = crc_t10dif_generic(*crc, data, length); } + return 0; } diff --git a/arch/arm/crypto/ghash-ce-core.S b/arch/arm/crypto/ghash-ce-core.S index 406009afa9cf..c47fe81abcb0 100644 --- a/arch/arm/crypto/ghash-ce-core.S +++ b/arch/arm/crypto/ghash-ce-core.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Accelerated GHASH implementation with NEON/ARMv8 vmull.p8/64 instructions. * * Copyright (C) 2015 - 2017 Linaro Ltd. <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c index b7d30b6cf49c..52d472a050e6 100644 --- a/arch/arm/crypto/ghash-ce-glue.c +++ b/arch/arm/crypto/ghash-ce-glue.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Accelerated GHASH implementation with ARMv8 vmull.p64 instructions. * * Copyright (C) 2015 - 2018 Linaro Ltd. <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. */ #include <asm/hwcap.h> @@ -14,6 +11,7 @@ #include <asm/unaligned.h> #include <crypto/cryptd.h> #include <crypto/internal/hash.h> +#include <crypto/internal/simd.h> #include <crypto/gf128mul.h> #include <linux/cpufeature.h> #include <linux/crypto.h> @@ -185,7 +183,6 @@ static int ghash_async_init(struct ahash_request *req) struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm); desc->tfm = child; - desc->flags = req->base.flags; return crypto_shash_init(desc); } @@ -196,7 +193,7 @@ static int ghash_async_update(struct ahash_request *req) struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; - if (!may_use_simd() || + if (!crypto_simd_usable() || (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) { memcpy(cryptd_req, req, sizeof(*req)); ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); @@ -214,7 +211,7 @@ static int ghash_async_final(struct ahash_request *req) struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; - if (!may_use_simd() || + if (!crypto_simd_usable() || (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) { memcpy(cryptd_req, req, sizeof(*req)); ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); @@ -232,7 +229,7 @@ static int ghash_async_digest(struct ahash_request *req) struct ahash_request *cryptd_req = ahash_request_ctx(req); struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; - if (!may_use_simd() || + if (!crypto_simd_usable() || (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) { memcpy(cryptd_req, req, sizeof(*req)); ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); @@ -242,7 +239,6 @@ static int ghash_async_digest(struct ahash_request *req) struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm); desc->tfm = child; - desc->flags = req->base.flags; return shash_ahash_digest(req, desc); } } @@ -255,7 +251,6 @@ static int ghash_async_import(struct ahash_request *req, const void *in) struct shash_desc *desc = cryptd_shash_desc(cryptd_req); desc->tfm = cryptd_ahash_child(ctx->cryptd_tfm); - desc->flags = req->base.flags; return crypto_shash_import(desc, in); } diff --git a/arch/arm/crypto/nhpoly1305-neon-glue.c b/arch/arm/crypto/nhpoly1305-neon-glue.c index 49aae87cb2bc..ae5aefc44a4d 100644 --- a/arch/arm/crypto/nhpoly1305-neon-glue.c +++ b/arch/arm/crypto/nhpoly1305-neon-glue.c @@ -9,6 +9,7 @@ #include <asm/neon.h> #include <asm/simd.h> #include <crypto/internal/hash.h> +#include <crypto/internal/simd.h> #include <crypto/nhpoly1305.h> #include <linux/module.h> @@ -25,7 +26,7 @@ static void _nh_neon(const u32 *key, const u8 *message, size_t message_len, static int nhpoly1305_neon_update(struct shash_desc *desc, const u8 *src, unsigned int srclen) { - if (srclen < 64 || !may_use_simd()) + if (srclen < 64 || !crypto_simd_usable()) return crypto_nhpoly1305_update(desc, src, srclen); do { diff --git a/arch/arm/crypto/sha1-armv7-neon.S b/arch/arm/crypto/sha1-armv7-neon.S index 2468fade49cf..28d816a6a530 100644 --- a/arch/arm/crypto/sha1-armv7-neon.S +++ b/arch/arm/crypto/sha1-armv7-neon.S @@ -1,11 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* sha1-armv7-neon.S - ARM/NEON accelerated SHA-1 transform function * * Copyright © 2013-2014 Jussi Kivilinna <jussi.kivilinna@iki.fi> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. */ #include <linux/linkage.h> diff --git a/arch/arm/crypto/sha1-ce-core.S b/arch/arm/crypto/sha1-ce-core.S index b623f51ccbcf..49a74a441aec 100644 --- a/arch/arm/crypto/sha1-ce-core.S +++ b/arch/arm/crypto/sha1-ce-core.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * sha1-ce-core.S - SHA-1 secure hash using ARMv8 Crypto Extensions * * Copyright (C) 2015 Linaro Ltd. * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/crypto/sha1-ce-glue.c b/arch/arm/crypto/sha1-ce-glue.c index b732522e20f8..e79b1fb4b4dc 100644 --- a/arch/arm/crypto/sha1-ce-glue.c +++ b/arch/arm/crypto/sha1-ce-glue.c @@ -1,14 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * sha1-ce-glue.c - SHA-1 secure hash using ARMv8 Crypto Extensions * * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <crypto/internal/hash.h> +#include <crypto/internal/simd.h> #include <crypto/sha.h> #include <crypto/sha1_base.h> #include <linux/cpufeature.h> @@ -33,7 +31,7 @@ static int sha1_ce_update(struct shash_desc *desc, const u8 *data, { struct sha1_state *sctx = shash_desc_ctx(desc); - if (!may_use_simd() || + if (!crypto_simd_usable() || (sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE) return sha1_update_arm(desc, data, len); @@ -47,7 +45,7 @@ static int sha1_ce_update(struct shash_desc *desc, const u8 *data, static int sha1_ce_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { - if (!may_use_simd()) + if (!crypto_simd_usable()) return sha1_finup_arm(desc, data, len, out); kernel_neon_begin(); diff --git a/arch/arm/crypto/sha1_glue.c b/arch/arm/crypto/sha1_glue.c index 98ab8239f919..c80b0ebfd02f 100644 --- a/arch/arm/crypto/sha1_glue.c +++ b/arch/arm/crypto/sha1_glue.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Cryptographic API. * Glue code for the SHA1 Secure Hash Algorithm assembler implementation @@ -8,12 +9,6 @@ * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk> * Copyright (c) Jean-Francois Dive <jef@linuxbe.org> * Copyright (c) Mathias Krause <minipli@googlemail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * */ #include <crypto/internal/hash.h> diff --git a/arch/arm/crypto/sha1_neon_glue.c b/arch/arm/crypto/sha1_neon_glue.c index d15e0ea2c95e..2c3627334335 100644 --- a/arch/arm/crypto/sha1_neon_glue.c +++ b/arch/arm/crypto/sha1_neon_glue.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Glue code for the SHA1 Secure Hash Algorithm assembler implementation using * ARM NEON instructions. @@ -10,15 +11,10 @@ * Copyright (c) Jean-Francois Dive <jef@linuxbe.org> * Copyright (c) Mathias Krause <minipli@googlemail.com> * Copyright (c) Chandramouli Narayanan <mouli@linux.intel.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * */ #include <crypto/internal/hash.h> +#include <crypto/internal/simd.h> #include <linux/init.h> #include <linux/module.h> #include <linux/mm.h> @@ -39,7 +35,7 @@ static int sha1_neon_update(struct shash_desc *desc, const u8 *data, { struct sha1_state *sctx = shash_desc_ctx(desc); - if (!may_use_simd() || + if (!crypto_simd_usable() || (sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE) return sha1_update_arm(desc, data, len); @@ -54,7 +50,7 @@ static int sha1_neon_update(struct shash_desc *desc, const u8 *data, static int sha1_neon_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { - if (!may_use_simd()) + if (!crypto_simd_usable()) return sha1_finup_arm(desc, data, len, out); kernel_neon_begin(); diff --git a/arch/arm/crypto/sha2-ce-core.S b/arch/arm/crypto/sha2-ce-core.S index 87ec11a5f405..4ad517577e23 100644 --- a/arch/arm/crypto/sha2-ce-core.S +++ b/arch/arm/crypto/sha2-ce-core.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * sha2-ce-core.S - SHA-224/256 secure hash using ARMv8 Crypto Extensions * * Copyright (C) 2015 Linaro Ltd. * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/crypto/sha2-ce-glue.c b/arch/arm/crypto/sha2-ce-glue.c index 1211a5c129fc..87f0b62386c6 100644 --- a/arch/arm/crypto/sha2-ce-glue.c +++ b/arch/arm/crypto/sha2-ce-glue.c @@ -1,14 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * sha2-ce-glue.c - SHA-224/SHA-256 using ARMv8 Crypto Extensions * * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <crypto/internal/hash.h> +#include <crypto/internal/simd.h> #include <crypto/sha.h> #include <crypto/sha256_base.h> #include <linux/cpufeature.h> @@ -34,7 +32,7 @@ static int sha2_ce_update(struct shash_desc *desc, const u8 *data, { struct sha256_state *sctx = shash_desc_ctx(desc); - if (!may_use_simd() || + if (!crypto_simd_usable() || (sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE) return crypto_sha256_arm_update(desc, data, len); @@ -49,7 +47,7 @@ static int sha2_ce_update(struct shash_desc *desc, const u8 *data, static int sha2_ce_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { - if (!may_use_simd()) + if (!crypto_simd_usable()) return crypto_sha256_arm_finup(desc, data, len, out); kernel_neon_begin(); diff --git a/arch/arm/crypto/sha256_glue.c b/arch/arm/crypto/sha256_glue.c index 0ae900e778f3..70efa9656bff 100644 --- a/arch/arm/crypto/sha256_glue.c +++ b/arch/arm/crypto/sha256_glue.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Glue code for the SHA256 Secure Hash Algorithm assembly implementation * using optimized ARM assembler and NEON instructions. @@ -7,12 +8,6 @@ * This file is based on sha256_ssse3_glue.c: * Copyright (C) 2013 Intel Corporation * Author: Tim Chen <tim.c.chen@linux.intel.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * */ #include <crypto/internal/hash.h> diff --git a/arch/arm/crypto/sha256_neon_glue.c b/arch/arm/crypto/sha256_neon_glue.c index 1d82c6cd31a4..a7ce38a36006 100644 --- a/arch/arm/crypto/sha256_neon_glue.c +++ b/arch/arm/crypto/sha256_neon_glue.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Glue code for the SHA256 Secure Hash Algorithm assembly implementation * using NEON instructions. @@ -6,15 +7,10 @@ * * This file is based on sha512_neon_glue.c: * Copyright © 2014 Jussi Kivilinna <jussi.kivilinna@iki.fi> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * */ #include <crypto/internal/hash.h> +#include <crypto/internal/simd.h> #include <linux/cryptohash.h> #include <linux/types.h> #include <linux/string.h> @@ -34,7 +30,7 @@ static int sha256_update(struct shash_desc *desc, const u8 *data, { struct sha256_state *sctx = shash_desc_ctx(desc); - if (!may_use_simd() || + if (!crypto_simd_usable() || (sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE) return crypto_sha256_arm_update(desc, data, len); @@ -49,7 +45,7 @@ static int sha256_update(struct shash_desc *desc, const u8 *data, static int sha256_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { - if (!may_use_simd()) + if (!crypto_simd_usable()) return crypto_sha256_arm_finup(desc, data, len, out); kernel_neon_begin(); diff --git a/arch/arm/crypto/sha512-glue.c b/arch/arm/crypto/sha512-glue.c index 86540cd4a6fa..232eeab1ec37 100644 --- a/arch/arm/crypto/sha512-glue.c +++ b/arch/arm/crypto/sha512-glue.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * sha512-glue.c - accelerated SHA-384/512 for ARM * * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <crypto/internal/hash.h> diff --git a/arch/arm/crypto/sha512-neon-glue.c b/arch/arm/crypto/sha512-neon-glue.c index 8a5642b41fd6..96cb94403540 100644 --- a/arch/arm/crypto/sha512-neon-glue.c +++ b/arch/arm/crypto/sha512-neon-glue.c @@ -1,14 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * sha512-neon-glue.c - accelerated SHA-384/512 for ARM NEON * * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <crypto/internal/hash.h> +#include <crypto/internal/simd.h> #include <crypto/sha.h> #include <crypto/sha512_base.h> #include <linux/crypto.h> @@ -30,7 +28,7 @@ static int sha512_neon_update(struct shash_desc *desc, const u8 *data, { struct sha512_state *sctx = shash_desc_ctx(desc); - if (!may_use_simd() || + if (!crypto_simd_usable() || (sctx->count[0] % SHA512_BLOCK_SIZE) + len < SHA512_BLOCK_SIZE) return sha512_arm_update(desc, data, len); @@ -45,7 +43,7 @@ static int sha512_neon_update(struct shash_desc *desc, const u8 *data, static int sha512_neon_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out) { - if (!may_use_simd()) + if (!crypto_simd_usable()) return sha512_arm_finup(desc, data, len, out); kernel_neon_begin(); diff --git a/arch/arm/firmware/Kconfig b/arch/arm/firmware/Kconfig deleted file mode 100644 index ad396af68e47..000000000000 --- a/arch/arm/firmware/Kconfig +++ /dev/null @@ -1,29 +0,0 @@ -config ARCH_SUPPORTS_FIRMWARE - bool - -config ARCH_SUPPORTS_TRUSTED_FOUNDATIONS - bool - select ARCH_SUPPORTS_FIRMWARE - -menu "Firmware options" - depends on ARCH_SUPPORTS_FIRMWARE - -config TRUSTED_FOUNDATIONS - bool "Trusted Foundations secure monitor support" - depends on ARCH_SUPPORTS_TRUSTED_FOUNDATIONS - default y - help - Some devices (including most Tegra-based consumer devices on the - market) are booted with the Trusted Foundations secure monitor - active, requiring some core operations to be performed by the secure - monitor instead of the kernel. - - This option allows the kernel to invoke the secure monitor whenever - required on devices using Trusted Foundations. See - arch/arm/include/asm/trusted_foundations.h or the - tlm,trusted-foundations device tree binding documentation for details - on how to use it. - - Say n if you don't know what this is about. - -endmenu diff --git a/arch/arm/firmware/Makefile b/arch/arm/firmware/Makefile deleted file mode 100644 index 6e41336b0bc4..000000000000 --- a/arch/arm/firmware/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o - -# tf_generic_smc() fails to build with -fsanitize-coverage=trace-pc -KCOV_INSTRUMENT := n diff --git a/arch/arm/firmware/trusted_foundations.c b/arch/arm/firmware/trusted_foundations.c deleted file mode 100644 index 689e6565abfc..000000000000 --- a/arch/arm/firmware/trusted_foundations.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Trusted Foundations support for ARM CPUs - * - * Copyright (c) 2013, NVIDIA Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/of.h> -#include <asm/firmware.h> -#include <asm/trusted_foundations.h> - -#define TF_SET_CPU_BOOT_ADDR_SMC 0xfffff200 - -#define TF_CPU_PM 0xfffffffc -#define TF_CPU_PM_S3 0xffffffe3 -#define TF_CPU_PM_S2 0xffffffe6 -#define TF_CPU_PM_S2_NO_MC_CLK 0xffffffe5 -#define TF_CPU_PM_S1 0xffffffe4 -#define TF_CPU_PM_S1_NOFLUSH_L2 0xffffffe7 - -static unsigned long cpu_boot_addr; - -static void tf_generic_smc(u32 type, u32 arg1, u32 arg2) -{ - register u32 r0 asm("r0") = type; - register u32 r1 asm("r1") = arg1; - register u32 r2 asm("r2") = arg2; - - asm volatile( - ".arch_extension sec\n\t" - "stmfd sp!, {r4 - r11}\n\t" - __asmeq("%0", "r0") - __asmeq("%1", "r1") - __asmeq("%2", "r2") - "mov r3, #0\n\t" - "mov r4, #0\n\t" - "smc #0\n\t" - "ldmfd sp!, {r4 - r11}\n\t" - : - : "r" (r0), "r" (r1), "r" (r2) - : "memory", "r3", "r12", "lr"); -} - -static int tf_set_cpu_boot_addr(int cpu, unsigned long boot_addr) -{ - cpu_boot_addr = boot_addr; - tf_generic_smc(TF_SET_CPU_BOOT_ADDR_SMC, cpu_boot_addr, 0); - - return 0; -} - -static int tf_prepare_idle(void) -{ - tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S1_NOFLUSH_L2, cpu_boot_addr); - - return 0; -} - -static const struct firmware_ops trusted_foundations_ops = { - .set_cpu_boot_addr = tf_set_cpu_boot_addr, - .prepare_idle = tf_prepare_idle, -}; - -void register_trusted_foundations(struct trusted_foundations_platform_data *pd) -{ - /* - * we are not using version information for now since currently - * supported SMCs are compatible with all TF releases - */ - register_firmware_ops(&trusted_foundations_ops); -} - -void of_register_trusted_foundations(void) -{ - struct device_node *node; - struct trusted_foundations_platform_data pdata; - int err; - - node = of_find_compatible_node(NULL, NULL, "tlm,trusted-foundations"); - if (!node) - return; - - err = of_property_read_u32(node, "tlm,version-major", - &pdata.version_major); - if (err != 0) - panic("Trusted Foundation: missing version-major property\n"); - err = of_property_read_u32(node, "tlm,version-minor", - &pdata.version_minor); - if (err != 0) - panic("Trusted Foundation: missing version-minor property\n"); - register_trusted_foundations(&pdata); -} diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 1d66db9c9db5..a8f149ab45b8 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 generic-y += compat.h generic-y += current.h generic-y += early_ioremap.h @@ -9,16 +10,13 @@ generic-y += kdebug.h generic-y += local.h generic-y += local64.h generic-y += mm-arch-hooks.h +generic-y += mmiowb.h generic-y += msi.h generic-y += parport.h generic-y += preempt.h -generic-y += rwsem.h generic-y += seccomp.h -generic-y += segment.h generic-y += serial.h generic-y += simd.h -generic-y += sizes.h -generic-y += timex.h generic-y += trace_clock.h generated-y += mach-types.h diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index 0bd530702118..0555f14cc8be 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -1,19 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/arch_gicv3.h * * Copyright (C) 2015 ARM Ltd. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __ASM_ARCH_GICV3_H #define __ASM_ARCH_GICV3_H @@ -34,6 +23,7 @@ #define ICC_SRE __ACCESS_CP15(c12, 0, c12, 5) #define ICC_IGRPEN1 __ACCESS_CP15(c12, 0, c12, 7) #define ICC_BPR1 __ACCESS_CP15(c12, 0, c12, 3) +#define ICC_RPR __ACCESS_CP15(c12, 0, c11, 3) #define __ICC_AP0Rx(x) __ACCESS_CP15(c12, 0, c8, 4 | x) #define ICC_AP0R0 __ICC_AP0Rx(0) @@ -54,7 +44,7 @@ #define ICH_VTR __ACCESS_CP15(c12, 4, c11, 1) #define ICH_MISR __ACCESS_CP15(c12, 4, c11, 2) #define ICH_EISR __ACCESS_CP15(c12, 4, c11, 3) -#define ICH_ELSR __ACCESS_CP15(c12, 4, c11, 5) +#define ICH_ELRSR __ACCESS_CP15(c12, 4, c11, 5) #define ICH_VMCR __ACCESS_CP15(c12, 4, c11, 7) #define __LR0(x) __ACCESS_CP15(c12, 4, c12, x) @@ -151,7 +141,7 @@ CPUIF_MAP(ICH_HCR, ICH_HCR_EL2) CPUIF_MAP(ICH_VTR, ICH_VTR_EL2) CPUIF_MAP(ICH_MISR, ICH_MISR_EL2) CPUIF_MAP(ICH_EISR, ICH_EISR_EL2) -CPUIF_MAP(ICH_ELSR, ICH_ELSR_EL2) +CPUIF_MAP(ICH_ELRSR, ICH_ELRSR_EL2) CPUIF_MAP(ICH_VMCR, ICH_VMCR_EL2) CPUIF_MAP(ICH_AP0R3, ICH_AP0R3_EL2) CPUIF_MAP(ICH_AP0R2, ICH_AP0R2_EL2) @@ -245,6 +235,21 @@ static inline void gic_write_bpr1(u32 val) write_sysreg(val, ICC_BPR1); } +static inline u32 gic_read_pmr(void) +{ + return read_sysreg(ICC_PMR); +} + +static inline void gic_write_pmr(u32 val) +{ + write_sysreg(val, ICC_PMR); +} + +static inline u32 gic_read_rpr(void) +{ + return read_sysreg(ICC_RPR); +} + /* * Even in 32bit systems that use LPAE, there is no guarantee that the I/O * interface provides true 64bit atomic accesses, so using strd/ldrd doesn't @@ -347,5 +352,22 @@ static inline void gits_write_vpendbaser(u64 val, void * __iomem addr) #define gits_read_vpendbaser(c) __gic_readq_nonatomic(c) +static inline bool gic_prio_masking_enabled(void) +{ + return false; +} + +static inline void gic_pmr_mask_irqs(void) +{ + /* Should not get called. */ + WARN_ON_ONCE(true); +} + +static inline void gic_arch_enable_irqs(void) +{ + /* Should not get called. */ + WARN_ON_ONCE(true); +} + #endif /* !__ASSEMBLY__ */ #endif /* !__ASM_ARCH_GICV3_H */ diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index 0a8d7bba2cb0..4b66ecd6be99 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -11,6 +11,10 @@ #include <clocksource/arm_arch_timer.h> #ifdef CONFIG_ARM_ARCH_TIMER +/* 32bit ARM doesn't know anything about timer errata... */ +#define has_erratum_handler(h) (false) +#define erratum_handler(h) (arch_timer_##h) + int arch_timer_arch_init(void); /* @@ -79,7 +83,7 @@ static inline u32 arch_timer_get_cntfrq(void) return val; } -static inline u64 arch_counter_get_cntpct(void) +static inline u64 __arch_counter_get_cntpct(void) { u64 cval; @@ -88,7 +92,12 @@ static inline u64 arch_counter_get_cntpct(void) return cval; } -static inline u64 arch_counter_get_cntvct(void) +static inline u64 __arch_counter_get_cntpct_stable(void) +{ + return __arch_counter_get_cntpct(); +} + +static inline u64 __arch_counter_get_cntvct(void) { u64 cval; @@ -97,6 +106,11 @@ static inline u64 arch_counter_get_cntvct(void) return cval; } +static inline u64 __arch_counter_get_cntvct_stable(void) +{ + return __arch_counter_get_cntvct(); +} + static inline u32 arch_timer_get_cntkctl(void) { u32 cntkctl; diff --git a/arch/arm/include/asm/arm-cci.h b/arch/arm/include/asm/arm-cci.h index fe77f7ab7e6b..7537bd790657 100644 --- a/arch/arm/include/asm/arm-cci.h +++ b/arch/arm/include/asm/arm-cci.h @@ -1,19 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/arm-cci.h * * Copyright (C) 2015 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __ASM_ARM_CCI_H diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 28a48e0d4cca..99929122dad7 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/assembler.h * * Copyright (C) 1996-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file contains arm architecture specific defines * for the different processors. * @@ -376,9 +373,9 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) .macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER() 9999: .if \inc == 1 - \instr\cond\()b\()\t\().w \reg, [\ptr, #\off] + \instr\()b\t\cond\().w \reg, [\ptr, #\off] .elseif \inc == 4 - \instr\cond\()\t\().w \reg, [\ptr, #\off] + \instr\t\cond\().w \reg, [\ptr, #\off] .else .error "Unsupported inc macro argument" .endif @@ -417,9 +414,9 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) .rept \rept 9999: .if \inc == 1 - \instr\cond\()b\()\t \reg, [\ptr], #\inc + \instr\()b\t\cond \reg, [\ptr], #\inc .elseif \inc == 4 - \instr\cond\()\t \reg, [\ptr], #\inc + \instr\t\cond \reg, [\ptr], #\inc .else .error "Unsupported inc macro argument" .endif @@ -460,7 +457,7 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req #ifndef CONFIG_CPU_USE_DOMAINS adds \tmp, \addr, #\size - 1 - sbcccs \tmp, \tmp, \limit + sbcscc \tmp, \tmp, \limit bcs \bad #ifdef CONFIG_CPU_SPECTRE movcs \addr, #0 @@ -474,7 +471,7 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) sub \tmp, \limit, #1 subs \tmp, \tmp, \addr @ tmp = limit - 1 - addr addhs \tmp, \tmp, #1 @ if (tmp >= 0) { - subhss \tmp, \tmp, \size @ tmp = limit - (addr + size) } + subshs \tmp, \tmp, \size @ tmp = limit - (addr + size) } movlo \addr, #0 @ if (tmp < 0) addr = NULL csdb #endif diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index f74756641410..50c3ac5f0809 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/atomic.h * * Copyright (C) 1996 Russell King. * Copyright (C) 2002 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_ATOMIC_H #define __ASM_ARM_ATOMIC_H diff --git a/arch/arm/include/asm/bL_switcher.h b/arch/arm/include/asm/bL_switcher.h index 1714800fa113..45a75d9381eb 100644 --- a/arch/arm/include/asm/bL_switcher.h +++ b/arch/arm/include/asm/bL_switcher.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/bL_switcher.h * * Created by: Nicolas Pitre, April 2012 * Copyright: (C) 2012-2013 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef ASM_BL_SWITCHER_H diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h index 69772e742a0a..83ae97c049d9 100644 --- a/arch/arm/include/asm/barrier.h +++ b/arch/arm/include/asm/barrier.h @@ -11,6 +11,8 @@ #define sev() __asm__ __volatile__ ("sev" : : : "memory") #define wfe() __asm__ __volatile__ ("wfe" : : : "memory") #define wfi() __asm__ __volatile__ ("wfi" : : : "memory") +#else +#define wfe() do { } while (0) #endif #if __LINUX_ARM_ARCH__ >= 7 diff --git a/arch/arm/include/asm/bugs.h b/arch/arm/include/asm/bugs.h index 73a99c72a930..97a312ba0840 100644 --- a/arch/arm/include/asm/bugs.h +++ b/arch/arm/include/asm/bugs.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/bugs.h * * Copyright (C) 1995-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_BUGS_H #define __ASM_BUGS_H diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index ec1a5fd0d294..d6667b8cfca5 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/cacheflush.h * * Copyright (C) 1999-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASMARM_CACHEFLUSH_H #define _ASMARM_CACHEFLUSH_H diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h index 07e27f212dc7..d2453e2d3f1f 100644 --- a/arch/arm/include/asm/cp15.h +++ b/arch/arm/include/asm/cp15.h @@ -68,6 +68,8 @@ #define BPIALL __ACCESS_CP15(c7, 0, c5, 6) #define ICIALLU __ACCESS_CP15(c7, 0, c5, 0) +#define CNTVCT __ACCESS_CP15_64(1, c14) + extern unsigned long cr_alignment; /* defined in entry-armv.S */ static inline unsigned long get_cr(void) diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h index 2744f0602550..bd6fdb4b922d 100644 --- a/arch/arm/include/asm/cpu.h +++ b/arch/arm/include/asm/cpu.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/cpu.h * * Copyright (C) 2004-2005 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_CPU_H #define __ASM_ARM_CPU_H diff --git a/arch/arm/include/asm/cpufeature.h b/arch/arm/include/asm/cpufeature.h index 6d425191d01d..16c161b3ff4d 100644 --- a/arch/arm/include/asm/cpufeature.h +++ b/arch/arm/include/asm/cpufeature.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2017 Linaro Ltd. <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_CPUFEATURE_H diff --git a/arch/arm/include/asm/dcc.h b/arch/arm/include/asm/dcc.h index b74899de0774..d24c4be724e3 100644 --- a/arch/arm/include/asm/dcc.h +++ b/arch/arm/include/asm/dcc.h @@ -1,13 +1,5 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <asm/barrier.h> diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h index 3234fe9bba6e..f6955b55c544 100644 --- a/arch/arm/include/asm/device.h +++ b/arch/arm/include/asm/device.h @@ -1,7 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Arch specific extensions to struct device - * - * This file is released under the GPLv2 */ #ifndef ASMARM_DEVICE_H #define ASMARM_DEVICE_H diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 31d3b96f0f4b..03ba90ffc0f8 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -96,15 +96,6 @@ static inline unsigned long dma_max_pfn(struct device *dev) } #define dma_max_pfn(dev) dma_max_pfn(dev) -#define arch_setup_dma_ops arch_setup_dma_ops -extern void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, - const struct iommu_ops *iommu, bool coherent); - -#ifdef CONFIG_MMU -#define arch_teardown_dma_ops arch_teardown_dma_ops -extern void arch_teardown_dma_ops(struct device *dev); -#endif - /* do not use this function in a driver */ static inline bool is_device_dma_coherent(struct device *dev) { diff --git a/arch/arm/include/asm/dmi.h b/arch/arm/include/asm/dmi.h index df2d2ff06f5b..32c95dad4cea 100644 --- a/arch/arm/include/asm/dmi.h +++ b/arch/arm/include/asm/dmi.h @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef __ASM_DMI_H #define __ASM_DMI_H diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index 99d9f630d6b6..567dbede4785 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/domain.h * * Copyright (C) 1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_PROC_DOMAIN_H #define __ASM_PROC_DOMAIN_H @@ -133,9 +130,11 @@ static inline void modify_domain(unsigned dom, unsigned type) { } * instructions (inline assembly) */ #ifdef CONFIG_CPU_USE_DOMAINS -#define TUSER(instr) #instr "t" +#define TUSER(instr) TUSERCOND(instr, ) +#define TUSERCOND(instr, cond) #instr "t" #cond #else -#define TUSER(instr) #instr +#define TUSER(instr) TUSERCOND(instr, ) +#define TUSERCOND(instr, cond) #instr #cond #endif #else /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/edac.h b/arch/arm/include/asm/edac.h index 5189fa819b60..16f95dd37b24 100644 --- a/arch/arm/include/asm/edac.h +++ b/arch/arm/include/asm/edac.h @@ -1,18 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2011 Calxeda, Inc. * Based on PPC version Copyright 2007 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef ASM_EDAC_H #define ASM_EDAC_H diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h index 38badaae8d9d..7667826b93f1 100644 --- a/arch/arm/include/asm/efi.h +++ b/arch/arm/include/asm/efi.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_EFI_H diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h index 34c1d96ef46d..23fe0bd405c7 100644 --- a/arch/arm/include/asm/firmware.h +++ b/arch/arm/include/asm/firmware.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 Samsung Electronics. * Kyungmin Park <kyungmin.park@samsung.com> * Tomasz Figa <t.figa@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_FIRMWARE_H @@ -24,7 +21,7 @@ struct firmware_ops { /* * Inform the firmware we intend to enter CPU idle mode */ - int (*prepare_idle)(void); + int (*prepare_idle)(unsigned long mode); /* * Enters CPU idle mode */ diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h index 85a34cc8316a..f4fe4d02cef2 100644 --- a/arch/arm/include/asm/floppy.h +++ b/arch/arm/include/asm/floppy.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/floppy.h * * Copyright (C) 1996-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here */ #ifndef __ASM_ARM_FLOPPY_H diff --git a/arch/arm/include/asm/fncpy.h b/arch/arm/include/asm/fncpy.h index de5354746924..78217b0e76e3 100644 --- a/arch/arm/include/asm/fncpy.h +++ b/arch/arm/include/asm/fncpy.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/fncpy.h - helper macros for function body copying * * Copyright (C) 2011 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h index 3ad4c10d0d84..9e2fe9ced084 100644 --- a/arch/arm/include/asm/fpstate.h +++ b/arch/arm/include/asm/fpstate.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/fpstate.h * * Copyright (C) 1995 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_FPSTATE_H diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 0a46676b4245..83c391b597d4 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -110,10 +110,11 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, preempt_disable(); __ua_flags = uaccess_save_and_enable(); __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n" + " .syntax unified\n" "1: " TUSER(ldr) " %1, [%4]\n" " teq %1, %2\n" " it eq @ explicit IT needed for the 2b label\n" - "2: " TUSER(streq) " %3, [%4]\n" + "2: " TUSERCOND(str, eq) " %3, [%4]\n" __futex_atomic_ex_table("%5") : "+r" (ret), "=&r" (val) : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT) diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index 8d1f498e5dd8..724f8dac1e5b 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/glue-cache.h * * Copyright (C) 1999-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef ASM_GLUE_CACHE_H #define ASM_GLUE_CACHE_H diff --git a/arch/arm/include/asm/glue-df.h b/arch/arm/include/asm/glue-df.h index 04e18b656659..209e46c02ddd 100644 --- a/arch/arm/include/asm/glue-df.h +++ b/arch/arm/include/asm/glue-df.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/glue-df.h * * Copyright (C) 1997-1999 Russell King * Copyright (C) 2000-2002 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef ASM_GLUE_DF_H #define ASM_GLUE_DF_H diff --git a/arch/arm/include/asm/glue-pf.h b/arch/arm/include/asm/glue-pf.h index d385f37c13f0..a033929fad3a 100644 --- a/arch/arm/include/asm/glue-pf.h +++ b/arch/arm/include/asm/glue-pf.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/glue-pf.h * * Copyright (C) 1997-1999 Russell King * Copyright (C) 2000-2002 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef ASM_GLUE_PF_H #define ASM_GLUE_PF_H diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h index 74be7c22035a..52df74aa3c2c 100644 --- a/arch/arm/include/asm/glue-proc.h +++ b/arch/arm/include/asm/glue-proc.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/glue-proc.h * * Copyright (C) 1997-1999 Russell King * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef ASM_GLUE_PROC_H #define ASM_GLUE_PROC_H diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h index fbf71d75ec83..377fd4cfab01 100644 --- a/arch/arm/include/asm/glue.h +++ b/arch/arm/include/asm/glue.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/glue.h * * Copyright (C) 1997-1999 Russell King * Copyright (C) 2000-2002 Deep Blue Solutions Ltd. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file provides the glue to stick the processor-specific bits * into the kernel in an efficient manner. The idea is to use branches * when we're only targeting one class of TLB, or indirect calls diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h index cba23eaa6072..7a88f160b1fb 100644 --- a/arch/arm/include/asm/hardirq.h +++ b/arch/arm/include/asm/hardirq.h @@ -6,6 +6,7 @@ #include <linux/threads.h> #include <asm/irq.h> +/* number of IPIS _not_ including IPI_CPU_BACKTRACE */ #define NR_IPI 7 typedef struct { diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 736292b42fca..32edfadb1593 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/hardware/cache-l2x0.h * * Copyright (C) 2007 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARM_HARDWARE_L2X0_H diff --git a/arch/arm/include/asm/hardware/cache-uniphier.h b/arch/arm/include/asm/hardware/cache-uniphier.h index 0ef42ae75b6c..b1fefca65d4d 100644 --- a/arch/arm/include/asm/hardware/cache-uniphier.h +++ b/arch/arm/include/asm/hardware/cache-uniphier.h @@ -1,16 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __CACHE_UNIPHIER_H diff --git a/arch/arm/include/asm/hardware/cp14.h b/arch/arm/include/asm/hardware/cp14.h index 61576dc58ede..44f2bde379c5 100644 --- a/arch/arm/include/asm/hardware/cp14.h +++ b/arch/arm/include/asm/hardware/cp14.h @@ -1,13 +1,5 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __ASM_HARDWARE_CP14_H diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h index 0d7552751aaf..3f18a56a025d 100644 --- a/arch/arm/include/asm/hardware/dec21285.h +++ b/arch/arm/include/asm/hardware/dec21285.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/hardware/dec21285.h * * Copyright (C) 1998 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * DC21285 registers */ #define DC21285_PCI_IACK 0x79000000 diff --git a/arch/arm/include/asm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S index 8c215acd9b57..f7692731e514 100644 --- a/arch/arm/include/asm/hardware/entry-macro-iomd.S +++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S @@ -16,25 +16,25 @@ ldr \tmp, =irq_prio_h teq \irqstat, #0 #ifdef IOMD_BASE - ldreqb \irqstat, [\base, #IOMD_DMAREQ] @ get dma + ldrbeq \irqstat, [\base, #IOMD_DMAREQ] @ get dma addeq \tmp, \tmp, #256 @ irq_prio_h table size teqeq \irqstat, #0 bne 2406f #endif - ldreqb \irqstat, [\base, #IOMD_IRQREQA] @ get low priority + ldrbeq \irqstat, [\base, #IOMD_IRQREQA] @ get low priority addeq \tmp, \tmp, #256 @ irq_prio_d table size teqeq \irqstat, #0 #ifdef IOMD_IRQREQC - ldreqb \irqstat, [\base, #IOMD_IRQREQC] + ldrbeq \irqstat, [\base, #IOMD_IRQREQC] addeq \tmp, \tmp, #256 @ irq_prio_l table size teqeq \irqstat, #0 #endif #ifdef IOMD_IRQREQD - ldreqb \irqstat, [\base, #IOMD_IRQREQD] + ldrbeq \irqstat, [\base, #IOMD_IRQREQD] addeq \tmp, \tmp, #256 @ irq_prio_lc table size teqeq \irqstat, #0 #endif -2406: ldrneb \irqnr, [\tmp, \irqstat] @ get IRQ number +2406: ldrbne \irqnr, [\tmp, \irqstat] @ get IRQ number .endm /* diff --git a/arch/arm/include/asm/hardware/ioc.h b/arch/arm/include/asm/hardware/ioc.h index 1f6b8013becb..6edd27fcd048 100644 --- a/arch/arm/include/asm/hardware/ioc.h +++ b/arch/arm/include/asm/hardware/ioc.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/hardware/ioc.h * * Copyright (C) Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Use these macros to read/write the IOC. All it does is perform the actual * read/write. */ diff --git a/arch/arm/include/asm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h index f9ee69e4f53e..53006ba5350f 100644 --- a/arch/arm/include/asm/hardware/iomd.h +++ b/arch/arm/include/asm/hardware/iomd.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/hardware/iomd.h * * Copyright (C) 1999 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file contains information out the IOMD ASIC used in the * Acorn RiscPC and subsequently integrated into the CLPS7500 chips. */ diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h index 240b29ef17db..6d998df17efd 100644 --- a/arch/arm/include/asm/hardware/iop3xx-adma.h +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -1,19 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright © 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * */ #ifndef _ADMA_H #define _ADMA_H diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 2594a95ff19a..64714c869f9f 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/hardware/iop3xx.h * @@ -6,10 +7,6 @@ * Author: Rory Bolt <rorybolt@pacbell.net> * Copyright (C) 2002 Rory Bolt * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __IOP3XX_H diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h index 250760e08103..bcedbab90ac0 100644 --- a/arch/arm/include/asm/hardware/iop_adma.h +++ b/arch/arm/include/asm/hardware/iop_adma.h @@ -1,19 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright © 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * */ #ifndef IOP_ADMA_H #define IOP_ADMA_H diff --git a/arch/arm/include/asm/hardware/memc.h b/arch/arm/include/asm/hardware/memc.h index 42ba7c167d1f..1d4ebe0a9678 100644 --- a/arch/arm/include/asm/hardware/memc.h +++ b/arch/arm/include/asm/hardware/memc.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/hardware/memc.h * * Copyright (C) Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define VDMA_ALIGNMENT PAGE_SIZE #define VDMA_XFERSIZE 16 diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h index 58cdf5d84122..505453315287 100644 --- a/arch/arm/include/asm/hardware/scoop.h +++ b/arch/arm/include/asm/hardware/scoop.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Definitions for the SCOOP interface found on various Sharp PDAs * * Copyright (c) 2004 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #define SCOOP_MCR 0x00 diff --git a/arch/arm/include/asm/hardware/ssp.h b/arch/arm/include/asm/hardware/ssp.h index 3b42e181997c..72d176790308 100644 --- a/arch/arm/include/asm/hardware/ssp.h +++ b/arch/arm/include/asm/hardware/ssp.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * ssp.h * * Copyright (C) 2003 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef SSP_H #define SSP_H diff --git a/arch/arm/include/asm/hugetlb-3level.h b/arch/arm/include/asm/hugetlb-3level.h index 0d9f3918fa7e..a30be5505793 100644 --- a/arch/arm/include/asm/hugetlb-3level.h +++ b/arch/arm/include/asm/hugetlb-3level.h @@ -1,22 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/hugetlb-3level.h * * Copyright (C) 2012 ARM Ltd. * * Based on arch/x86/include/asm/hugetlb.h. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef _ASM_ARM_HUGETLB_3LEVEL_H diff --git a/arch/arm/include/asm/hugetlb.h b/arch/arm/include/asm/hugetlb.h index b67256c22b08..318dcf5921ab 100644 --- a/arch/arm/include/asm/hugetlb.h +++ b/arch/arm/include/asm/hugetlb.h @@ -1,22 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/hugetlb.h * * Copyright (C) 2012 ARM Ltd. * * Based on arch/x86/include/asm/hugetlb.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef _ASM_ARM_HUGETLB_H diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 6b51826ab3d1..f11c35cf0b74 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/io.h * * Copyright (C) 1996-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Modifications: * 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both * constant addresses and variable addresses. @@ -281,8 +278,6 @@ extern void _memcpy_fromio(void *, const volatile void __iomem *, size_t); extern void _memcpy_toio(volatile void __iomem *, const void *, size_t); extern void _memset_io(volatile void __iomem *, int, size_t); -#define mmiowb() - /* * Memory access primitives * ------------------------ diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h index 82290f212d8e..213607a1f45c 100644 --- a/arch/arm/include/asm/kprobes.h +++ b/arch/arm/include/asm/kprobes.h @@ -1,16 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/kprobes.h * * Copyright (C) 2006, 2007 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ #ifndef _ARM_KPROBES_H diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index b95f8d0d9f17..0125aa059d5b 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef __ARM_KVM_ARM_H__ diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 35491af87985..f615830f9f57 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef __ARM_KVM_ASM_H__ diff --git a/arch/arm/include/asm/kvm_coproc.h b/arch/arm/include/asm/kvm_coproc.h index e74ab0fbab79..a23826117dd6 100644 --- a/arch/arm/include/asm/kvm_coproc.h +++ b/arch/arm/include/asm/kvm_coproc.h @@ -1,18 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 Rusty Russell IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef __ARM_KVM_COPROC_H__ diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index 77121b713bef..6b7644a383f6 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef __ARM_KVM_EMULATE_H__ @@ -265,6 +253,14 @@ static inline bool kvm_vcpu_dabt_isextabt(struct kvm_vcpu *vcpu) } } +static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu) +{ + if (kvm_vcpu_trap_is_iabt(vcpu)) + return false; + + return kvm_vcpu_dabt_iswrite(vcpu); +} + static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu) { return kvm_vcpu_get_hsr(vcpu) & HSR_HVC_IMM_MASK; @@ -335,4 +331,6 @@ static inline unsigned long vcpu_data_host_to_guest(struct kvm_vcpu *vcpu, } } +static inline void vcpu_ptrauth_setup_lazy(struct kvm_vcpu *vcpu) {} + #endif /* __ARM_KVM_EMULATE_H__ */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 50e89869178a..f80418ddeb60 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -1,24 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef __ARM_KVM_HOST_H__ #define __ARM_KVM_HOST_H__ +#include <linux/errno.h> #include <linux/types.h> #include <linux/kvm_types.h> #include <asm/cputype.h> @@ -26,6 +15,7 @@ #include <asm/kvm_asm.h> #include <asm/kvm_mmio.h> #include <asm/fpstate.h> +#include <asm/smp_plat.h> #include <kvm/arm_arch_timer.h> #define __KVM_HAVE_ARCH_INTC_INITIALIZED @@ -52,15 +42,20 @@ DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use); +static inline int kvm_arm_init_sve(void) { return 0; } + u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode); int __attribute_const__ kvm_target_cpu(void); int kvm_reset_vcpu(struct kvm_vcpu *vcpu); void kvm_reset_coprocs(struct kvm_vcpu *vcpu); -struct kvm_arch { - /* VTTBR value associated with below pgd and vmid */ - u64 vttbr; +struct kvm_vmid { + /* The VMID generation used for the virt. memory system */ + u64 vmid_gen; + u32 vmid; +}; +struct kvm_arch { /* The last vcpu id that ran on each physical CPU */ int __percpu *last_vcpu_ran; @@ -70,11 +65,11 @@ struct kvm_arch { */ /* The VMID generation used for the virt. memory system */ - u64 vmid_gen; - u32 vmid; + struct kvm_vmid vmid; /* Stage-2 page table */ pgd_t *pgd; + phys_addr_t pgd_phys; /* Interrupt controller */ struct vgic_dist vgic; @@ -146,7 +141,18 @@ struct kvm_cpu_context { u32 cp15[NR_CP15_REGS]; }; -typedef struct kvm_cpu_context kvm_cpu_context_t; +struct kvm_host_data { + struct kvm_cpu_context host_ctxt; +}; + +typedef struct kvm_host_data kvm_host_data_t; + +static inline void kvm_init_host_cpu_context(struct kvm_cpu_context *cpu_ctxt, + int cpu) +{ + /* The host's MPIDR is immutable, so let's set it up at boot time */ + cpu_ctxt->cp15[c0_MPIDR] = cpu_logical_map(cpu); +} struct vcpu_reset_state { unsigned long pc; @@ -171,7 +177,7 @@ struct kvm_vcpu_arch { struct kvm_vcpu_fault_info fault; /* Host FP context */ - kvm_cpu_context_t *host_cpu_context; + struct kvm_cpu_context *host_cpu_context; /* VGIC state */ struct vgic_cpu vgic_cpu; @@ -224,7 +230,35 @@ unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu); int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices); int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); -unsigned long kvm_call_hyp(void *hypfn, ...); + +unsigned long __kvm_call_hyp(void *hypfn, ...); + +/* + * The has_vhe() part doesn't get emitted, but is used for type-checking. + */ +#define kvm_call_hyp(f, ...) \ + do { \ + if (has_vhe()) { \ + f(__VA_ARGS__); \ + } else { \ + __kvm_call_hyp(kvm_ksym_ref(f), ##__VA_ARGS__); \ + } \ + } while(0) + +#define kvm_call_hyp_ret(f, ...) \ + ({ \ + typeof(f(__VA_ARGS__)) ret; \ + \ + if (has_vhe()) { \ + ret = f(__VA_ARGS__); \ + } else { \ + ret = __kvm_call_hyp(kvm_ksym_ref(f), \ + ##__VA_ARGS__); \ + } \ + \ + ret; \ + }) + void force_vm_exit(const cpumask_t *mask); int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu, struct kvm_vcpu_events *events); @@ -275,7 +309,7 @@ static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr, * compliant with the PCS!). */ - kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr); + __kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr); } static inline void __cpu_init_stage2(void) @@ -322,6 +356,9 @@ static inline void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu) {} static inline void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu) {} static inline void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu) {} +static inline void kvm_vcpu_pmu_restore_guest(struct kvm_vcpu *vcpu) {} +static inline void kvm_vcpu_pmu_restore_host(struct kvm_vcpu *vcpu) {} + static inline void kvm_arm_vhe_guest_enter(void) {} static inline void kvm_arm_vhe_guest_exit(void) {} @@ -370,4 +407,14 @@ static inline int kvm_arm_setup_stage2(struct kvm *kvm, unsigned long type) return 0; } +static inline int kvm_arm_vcpu_finalize(struct kvm_vcpu *vcpu, int feature) +{ + return -EINVAL; +} + +static inline bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu) +{ + return true; +} + #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h index e93a0cac9add..71ac1c8d101c 100644 --- a/arch/arm/include/asm/kvm_hyp.h +++ b/arch/arm/include/asm/kvm_hyp.h @@ -1,18 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2015 - ARM Ltd * Author: Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __ARM_KVM_HYP_H__ @@ -40,6 +29,7 @@ #define TTBR1 __ACCESS_CP15_64(1, c2) #define VTTBR __ACCESS_CP15_64(6, c2) #define PAR __ACCESS_CP15_64(0, c7) +#define CNTP_CVAL __ACCESS_CP15_64(2, c14) #define CNTV_CVAL __ACCESS_CP15_64(3, c14) #define CNTVOFF __ACCESS_CP15_64(4, c14) @@ -85,6 +75,7 @@ #define TID_PRIV __ACCESS_CP15(c13, 0, c0, 4) #define HTPIDR __ACCESS_CP15(c13, 4, c0, 2) #define CNTKCTL __ACCESS_CP15(c14, 0, c1, 0) +#define CNTP_CTL __ACCESS_CP15(c14, 0, c2, 1) #define CNTV_CTL __ACCESS_CP15(c14, 0, c3, 1) #define CNTHCTL __ACCESS_CP15(c14, 4, c1, 0) @@ -94,6 +85,8 @@ #define read_sysreg_el0(r) read_sysreg(r##_el0) #define write_sysreg_el0(v, r) write_sysreg(v, r##_el0) +#define cntp_ctl_el0 CNTP_CTL +#define cntp_cval_el0 CNTP_CVAL #define cntv_ctl_el0 CNTV_CTL #define cntv_cval_el0 CNTV_CVAL #define cntvoff_el2 CNTVOFF diff --git a/arch/arm/include/asm/kvm_mmio.h b/arch/arm/include/asm/kvm_mmio.h index f3a7de71f515..7c0eddb0adb2 100644 --- a/arch/arm/include/asm/kvm_mmio.h +++ b/arch/arm/include/asm/kvm_mmio.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef __ARM_KVM_MMIO_H__ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 3a875fc1b63c..0d84d50bf9ba 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef __ARM_KVM_MMU_H__ @@ -381,6 +369,17 @@ static inline int kvm_read_guest_lock(struct kvm *kvm, return ret; } +static inline int kvm_write_guest_lock(struct kvm *kvm, gpa_t gpa, + const void *data, unsigned long len) +{ + int srcu_idx = srcu_read_lock(&kvm->srcu); + int ret = kvm_write_guest(kvm, gpa, data, len); + + srcu_read_unlock(&kvm->srcu, srcu_idx); + + return ret; +} + static inline void *kvm_get_hyp_vector(void) { switch(read_cpuid_part()) { @@ -421,9 +420,14 @@ static inline int hyp_map_aux_data(void) static inline void kvm_set_ipa_limit(void) {} -static inline bool kvm_cpu_has_cnp(void) +static __always_inline u64 kvm_get_vttbr(struct kvm *kvm) { - return false; + struct kvm_vmid *vmid = &kvm->arch.vmid; + u64 vmid_field, baddr; + + baddr = kvm->arch.pgd_phys; + vmid_field = (u64)vmid->vmid << VTTBR_VMID_SHIFT; + return kvm_phys_to_vttbr(baddr) | vmid_field; } #endif /* !__ASSEMBLY__ */ diff --git a/arch/arm/include/asm/kvm_ras.h b/arch/arm/include/asm/kvm_ras.h new file mode 100644 index 000000000000..e9577292dfe4 --- /dev/null +++ b/arch/arm/include/asm/kvm_ras.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2018 - Arm Ltd */ + +#ifndef __ARM_KVM_RAS_H__ +#define __ARM_KVM_RAS_H__ + +#include <linux/types.h> + +static inline int kvm_handle_guest_sea(phys_addr_t addr, unsigned int esr) +{ + return -1; +} + +#endif /* __ARM_KVM_RAS_H__ */ diff --git a/arch/arm/include/asm/limits.h b/arch/arm/include/asm/limits.h deleted file mode 100644 index ab159371d786..000000000000 --- a/arch/arm/include/asm/limits.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_PIPE_H -#define __ASM_PIPE_H - -#ifndef PAGE_SIZE -#include <asm/page.h> -#endif - -#define PIPE_BUF PAGE_SIZE - -#endif - diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index bb8851208e17..e7df5a822cab 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/mach/arch.h * * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/types.h> diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h index 9e614a18e680..1506422af383 100644 --- a/arch/arm/include/asm/mach/dma.h +++ b/arch/arm/include/asm/mach/dma.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/mach/dma.h * * Copyright (C) 1998-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This header file describes the interface between the generic DMA handler * (dma.c) and the architecture-specific DMA backends (dma-*.c) */ diff --git a/arch/arm/include/asm/mach/flash.h b/arch/arm/include/asm/mach/flash.h index bada3f845a97..c9cbfdefc938 100644 --- a/arch/arm/include/asm/mach/flash.h +++ b/arch/arm/include/asm/mach/flash.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/mach/flash.h * * Copyright (C) 2003 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef ASMARM_MACH_FLASH_H #define ASMARM_MACH_FLASH_H diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index de4634b51456..dfe832a3bfc7 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/mach/irq.h * * Copyright (C) 1995-2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_MACH_IRQ_H #define __ASM_ARM_MACH_IRQ_H diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 9b7c328fb207..92282558caf7 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/map.h * * Copyright (C) 1999-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Page table mapping constructs and function prototypes */ #ifndef __ASM_MACH_MAP_H diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 233b4b50eff3..83d340702680 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/mach/pci.h * * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_MACH_PCI_H diff --git a/arch/arm/include/asm/mach/sharpsl_param.h b/arch/arm/include/asm/mach/sharpsl_param.h index 7a24ecf04220..700a377c20bf 100644 --- a/arch/arm/include/asm/mach/sharpsl_param.h +++ b/arch/arm/include/asm/mach/sharpsl_param.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Hardware parameter area specific to Sharp SL series devices * * Copyright (c) 2005 Richard Purdie * * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ struct sharpsl_param_info { diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h index 4ac3a019a46f..d75d39280db7 100644 --- a/arch/arm/include/asm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/mach/time.h * * Copyright (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_MACH_TIME_H #define __ASM_ARM_MACH_TIME_H diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index acd4983d9b1f..755c97de348c 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/mcpm.h * * Created by: Nicolas Pitre, April 2012 * Copyright: (C) 2012-2013 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef MCPM_H diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index ed8fd0d19a3e..99035b5891ef 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/memory.h * * Copyright (C) 2000-2002 Russell King * modification for nommu, Hyok S. Choi, 2004 * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Note: this file should not be included by non-asm/.h files */ #ifndef __ASM_ARM_MEMORY_H diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 7f303295ef19..f99ed524fe41 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/mmu_context.h * * Copyright (C) 1996 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Changelog: * 27-06-1996 RMK Created */ diff --git a/arch/arm/include/asm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h index d79d66d2cf71..dfcef0152e3d 100644 --- a/arch/arm/include/asm/mtd-xip.h +++ b/arch/arm/include/asm/mtd-xip.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * MTD primitives for XIP support. Architecture specific functions * @@ -6,10 +7,6 @@ * Author: Nicolas Pitre * Created: Nov 2, 2004 * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARM_MTD_XIP_H__ diff --git a/arch/arm/include/asm/neon.h b/arch/arm/include/asm/neon.h index 8f730fe70093..aac10ba33ee2 100644 --- a/arch/arm/include/asm/neon.h +++ b/arch/arm/include/asm/neon.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/include/asm/neon.h * * Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <asm/hwcap.h> diff --git a/arch/arm/include/asm/opcodes-sec.h b/arch/arm/include/asm/opcodes-sec.h index bc3a9174417c..b6f4b35024b8 100644 --- a/arch/arm/include/asm/opcodes-sec.h +++ b/arch/arm/include/asm/opcodes-sec.h @@ -1,12 +1,5 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. * * Copyright (C) 2012 ARM Limited */ diff --git a/arch/arm/include/asm/opcodes-virt.h b/arch/arm/include/asm/opcodes-virt.h index efcfdf92d9d5..0b58da81b78e 100644 --- a/arch/arm/include/asm/opcodes-virt.h +++ b/arch/arm/include/asm/opcodes-virt.h @@ -1,20 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions * Copyright (C) 2012 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ #ifndef __ASM_ARM_OPCODES_VIRT_H #define __ASM_ARM_OPCODES_VIRT_H diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h index e796c598513b..6bff94b2372b 100644 --- a/arch/arm/include/asm/opcodes.h +++ b/arch/arm/include/asm/opcodes.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/opcodes.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_OPCODES_H diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index c2bf24f40177..3364637755e8 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -1,21 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/outercache.h * * Copyright (C) 2010 ARM Ltd. * Written by Catalin Marinas <catalin.marinas@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_OUTERCACHE_H diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h index 8f2c47bec375..7c2c72323d17 100644 --- a/arch/arm/include/asm/page-nommu.h +++ b/arch/arm/include/asm/page-nommu.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/page-nommu.h * * Copyright (C) 2004 Hyok S. Choi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASMARM_PAGE_NOMMU_H diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index 4355f0ec44d6..c2b75cba26df 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/page.h * * Copyright (C) 1995-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASMARM_PAGE_H #define _ASMARM_PAGE_H diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h index a89b4076cde4..f44f448537f2 100644 --- a/arch/arm/include/asm/percpu.h +++ b/arch/arm/include/asm/percpu.h @@ -1,17 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2012 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef _ASM_ARM_PERCPU_H_ #define _ASM_ARM_PERCPU_H_ diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 4f9dec489931..fe87397c3d8c 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/include/asm/perf_event.h * * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __ARM_PERF_EVENT_H__ diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 17ab72f0cc4e..c038cff6fdd3 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/pgalloc.h * * Copyright (C) 2000-2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASMARM_PGALLOC_H #define _ASMARM_PGALLOC_H diff --git a/arch/arm/include/asm/pgtable-2level-hwdef.h b/arch/arm/include/asm/pgtable-2level-hwdef.h index 3f82e9da7cec..556937e1790e 100644 --- a/arch/arm/include/asm/pgtable-2level-hwdef.h +++ b/arch/arm/include/asm/pgtable-2level-hwdef.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/pgtable-2level-hwdef.h * * Copyright (C) 1995-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASM_PGTABLE_2LEVEL_HWDEF_H #define _ASM_PGTABLE_2LEVEL_HWDEF_H diff --git a/arch/arm/include/asm/pgtable-2level-types.h b/arch/arm/include/asm/pgtable-2level-types.h index 66cb5b0e89c5..650e793f4142 100644 --- a/arch/arm/include/asm/pgtable-2level-types.h +++ b/arch/arm/include/asm/pgtable-2level-types.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/pgtable-2level-types.h * * Copyright (C) 1995-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef _ASM_PGTABLE_2LEVEL_TYPES_H #define _ASM_PGTABLE_2LEVEL_TYPES_H diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index 12659ce5c1f3..51beec41d48c 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/pgtable-2level.h * * Copyright (C) 1995-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASM_PGTABLE_2LEVEL_H #define _ASM_PGTABLE_2LEVEL_H diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h index 4cd664abfcd3..2f35b4eddaa8 100644 --- a/arch/arm/include/asm/pgtable-3level-hwdef.h +++ b/arch/arm/include/asm/pgtable-3level-hwdef.h @@ -1,21 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/pgtable-3level-hwdef.h * * Copyright (C) 2011 ARM Ltd. * Author: Catalin Marinas <catalin.marinas@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef _ASM_PGTABLE_3LEVEL_HWDEF_H #define _ASM_PGTABLE_3LEVEL_HWDEF_H diff --git a/arch/arm/include/asm/pgtable-3level-types.h b/arch/arm/include/asm/pgtable-3level-types.h index 921aa30259c4..d0f587a2129d 100644 --- a/arch/arm/include/asm/pgtable-3level-types.h +++ b/arch/arm/include/asm/pgtable-3level-types.h @@ -1,21 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/pgtable-3level-types.h * * Copyright (C) 2011 ARM Ltd. * Author: Catalin Marinas <catalin.marinas@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef _ASM_PGTABLE_3LEVEL_TYPES_H #define _ASM_PGTABLE_3LEVEL_TYPES_H diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 6d50a11d7793..5b18295021a0 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -1,21 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/pgtable-3level.h * * Copyright (C) 2011 ARM Ltd. * Author: Catalin Marinas <catalin.marinas@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef _ASM_PGTABLE_3LEVEL_H #define _ASM_PGTABLE_3LEVEL_H diff --git a/arch/arm/include/asm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h index 8426229ba292..d60548ccd13e 100644 --- a/arch/arm/include/asm/pgtable-hwdef.h +++ b/arch/arm/include/asm/pgtable-hwdef.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/pgtable-hwdef.h * * Copyright (C) 1995-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASMARM_PGTABLE_HWDEF_H #define _ASMARM_PGTABLE_HWDEF_H diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h index a0d726a47c8a..0b1f6799a32e 100644 --- a/arch/arm/include/asm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/pgtable-nommu.h * * Copyright (C) 1995-2002 Russell King * Copyright (C) 2004 Hyok S. Choi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASMARM_PGTABLE_NOMMU_H #define _ASMARM_PGTABLE_NOMMU_H diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index a757401129f9..f2e990dc27e7 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/pgtable.h * * Copyright (C) 1995-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASMARM_PGTABLE_H #define _ASMARM_PGTABLE_H @@ -125,6 +122,9 @@ extern pgprot_t pgprot_s2_device; #define pgprot_stronglyordered(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED) +#define pgprot_device(prot) \ + __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_DEV_SHARED | L_PTE_SHARED | L_PTE_DIRTY | L_PTE_XN) + #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE #define pgprot_dmacoherent(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN) diff --git a/arch/arm/include/asm/probes.h b/arch/arm/include/asm/probes.h index 991c9127c650..ebbd9ec95d21 100644 --- a/arch/arm/include/asm/probes.h +++ b/arch/arm/include/asm/probes.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/probes.h * @@ -5,15 +6,6 @@ * which contains the following notice... * * Copyright (C) 2006, 2007 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ #ifndef _ASM_PROBES_H diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index e1b6f280ab08..c82f7a29ec4a 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/proc-fns.h * * Copyright (C) 1997-1999 Russell King * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_PROCFNS_H #define __ASM_PROCFNS_H diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 120f4c9bbfde..20c2f42454b8 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/processor.h * * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_PROCESSOR_H @@ -89,7 +86,11 @@ extern void release_thread(struct task_struct *); unsigned long get_wchan(struct task_struct *p); #if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327) -#define cpu_relax() smp_mb() +#define cpu_relax() \ + do { \ + smp_mb(); \ + __asm__ __volatile__("nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;"); \ + } while (0) #else #define cpu_relax() barrier() #endif @@ -131,8 +132,8 @@ static inline void prefetchw(const void *ptr) __asm__ __volatile__( ".arch_extension mp\n" __ALT_SMP_ASM( - WASM(pldw) "\t%a0", - WASM(pld) "\t%a0" + "pldw\t%a0", + "pld\t%a0" ) :: "p" (ptr)); } diff --git a/arch/arm/include/asm/procinfo.h b/arch/arm/include/asm/procinfo.h index ca52e584ef74..42df316fb8ba 100644 --- a/arch/arm/include/asm/procinfo.h +++ b/arch/arm/include/asm/procinfo.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/procinfo.h * * Copyright (C) 1996-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_PROCINFO_H #define __ASM_PROCINFO_H diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index cd94ef2ef283..1e36c40533c1 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/prom.h * * Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __ASMARM_PROM_H #define __ASMARM_PROM_H diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h index e1b825dfab23..536e155328fa 100644 --- a/arch/arm/include/asm/psci.h +++ b/arch/arm/include/asm/psci.h @@ -1,12 +1,5 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. * * Copyright (C) 2012 ARM Limited */ diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index c7cdbb43ae7c..91d6b7856be4 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/ptrace.h * * Copyright (C) 1996-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_PTRACE_H #define __ASM_ARM_PTRACE_H diff --git a/arch/arm/include/asm/set_memory.h b/arch/arm/include/asm/set_memory.h index 5aa4315abe91..a1ceff4295d3 100644 --- a/arch/arm/include/asm/set_memory.h +++ b/arch/arm/include/asm/set_memory.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 1999-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASMARM_SET_MEMORY_H diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 3613d7e9fc40..77e5582c2259 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/include/asm/setup.h * * Copyright (C) 1997-1999 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Structure passed to kernel to tell it about the * hardware it's running on. See Documentation/arm/Setup * for more info. diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 709a55989cb0..a91f21e3c5b5 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/smp.h * * Copyright (C) 2004-2005 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_SMP_H #define __ASM_ARM_SMP_H @@ -67,7 +64,6 @@ struct secondary_data { void *stack; }; extern struct secondary_data secondary_data; -extern volatile int pen_release; extern void secondary_startup(void); extern void secondary_startup_arm(void); diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h index 312784ee9936..c729d2113a24 100644 --- a/arch/arm/include/asm/smp_twd.h +++ b/arch/arm/include/asm/smp_twd.h @@ -19,20 +19,4 @@ #define TWD_TIMER_CONTROL_PERIODIC (1 << 1) #define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2) -#include <linux/ioport.h> - -struct twd_local_timer { - struct resource res[2]; -}; - -#define DEFINE_TWD_LOCAL_TIMER(name,base,irq) \ -struct twd_local_timer name __initdata = { \ - .res = { \ - DEFINE_RES_MEM(base, 0x10), \ - DEFINE_RES_IRQ(irq), \ - }, \ -}; - -int twd_local_timer_register(struct twd_local_timer *); - #endif diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index 099c78fcf62d..8f009e788ad4 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -210,11 +210,12 @@ static inline void arch_read_lock(arch_rwlock_t *rw) prefetchw(&rw->lock); __asm__ __volatile__( +" .syntax unified\n" "1: ldrex %0, [%2]\n" " adds %0, %0, #1\n" " strexpl %1, %0, [%2]\n" WFE("mi") -" rsbpls %0, %1, #0\n" +" rsbspl %0, %1, #0\n" " bmi 1b" : "=&r" (tmp), "=&r" (tmp2) : "r" (&rw->lock) diff --git a/arch/arm/include/asm/stage2_pgtable.h b/arch/arm/include/asm/stage2_pgtable.h index de2089501b8b..aaceec7855ec 100644 --- a/arch/arm/include/asm/stage2_pgtable.h +++ b/arch/arm/include/asm/stage2_pgtable.h @@ -1,19 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2016 - ARM Ltd * * stage2 page table helpers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __ARM_S2_PGTABLE_H_ @@ -32,14 +21,14 @@ #define stage2_pgd_present(kvm, pgd) pgd_present(pgd) #define stage2_pgd_populate(kvm, pgd, pud) pgd_populate(NULL, pgd, pud) #define stage2_pud_offset(kvm, pgd, address) pud_offset(pgd, address) -#define stage2_pud_free(kvm, pud) pud_free(NULL, pud) +#define stage2_pud_free(kvm, pud) do { } while (0) #define stage2_pud_none(kvm, pud) pud_none(pud) #define stage2_pud_clear(kvm, pud) pud_clear(pud) #define stage2_pud_present(kvm, pud) pud_present(pud) #define stage2_pud_populate(kvm, pud, pmd) pud_populate(NULL, pud, pmd) #define stage2_pmd_offset(kvm, pud, address) pmd_offset(pud, address) -#define stage2_pmd_free(kvm, pmd) pmd_free(NULL, pmd) +#define stage2_pmd_free(kvm, pmd) free_page((unsigned long)pmd) #define stage2_pud_huge(kvm, pud) pud_huge(pud) @@ -75,6 +64,8 @@ static inline bool kvm_stage2_has_pud(struct kvm *kvm) #define S2_PMD_MASK PMD_MASK #define S2_PMD_SIZE PMD_SIZE +#define S2_PUD_MASK PUD_MASK +#define S2_PUD_SIZE PUD_SIZE static inline bool kvm_stage2_has_pmd(struct kvm *kvm) { diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h index 452bbdcbcc83..506314265c6f 100644 --- a/arch/arm/include/asm/suspend.h +++ b/arch/arm/include/asm/suspend.h @@ -10,6 +10,7 @@ struct sleep_save_sp { }; extern void cpu_resume(void); +extern void cpu_resume_no_hyp(void); extern void cpu_resume_arm(void); extern int cpu_suspend(unsigned long, int (*)(unsigned long)); diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h index 06dea6bce293..fd02761ba06c 100644 --- a/arch/arm/include/asm/syscall.h +++ b/arch/arm/include/asm/syscall.h @@ -55,56 +55,25 @@ static inline void syscall_set_return_value(struct task_struct *task, static inline void syscall_get_arguments(struct task_struct *task, struct pt_regs *regs, - unsigned int i, unsigned int n, unsigned long *args) { - if (n == 0) - return; - - if (i + n > SYSCALL_MAX_ARGS) { - unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i; - unsigned int n_bad = n + i - SYSCALL_MAX_ARGS; - pr_warn("%s called with max args %d, handling only %d\n", - __func__, i + n, SYSCALL_MAX_ARGS); - memset(args_bad, 0, n_bad * sizeof(args[0])); - n = SYSCALL_MAX_ARGS - i; - } - - if (i == 0) { - args[0] = regs->ARM_ORIG_r0; - args++; - i++; - n--; - } - - memcpy(args, ®s->ARM_r0 + i, n * sizeof(args[0])); + args[0] = regs->ARM_ORIG_r0; + args++; + + memcpy(args, ®s->ARM_r0 + 1, 5 * sizeof(args[0])); } static inline void syscall_set_arguments(struct task_struct *task, struct pt_regs *regs, - unsigned int i, unsigned int n, const unsigned long *args) { - if (n == 0) - return; - - if (i + n > SYSCALL_MAX_ARGS) { - pr_warn("%s called with max args %d, handling only %d\n", - __func__, i + n, SYSCALL_MAX_ARGS); - n = SYSCALL_MAX_ARGS - i; - } - - if (i == 0) { - regs->ARM_ORIG_r0 = args[0]; - args++; - i++; - n--; - } - - memcpy(®s->ARM_r0 + i, args, n * sizeof(args[0])); + regs->ARM_ORIG_r0 = args[0]; + args++; + + memcpy(®s->ARM_r0 + 1, args, 5 * sizeof(args[0])); } -static inline int syscall_get_arch(void) +static inline int syscall_get_arch(struct task_struct *task) { /* ARM tasks don't change audit architectures on the fly. */ return AUDIT_ARCH_ARM; diff --git a/arch/arm/include/asm/system_misc.h b/arch/arm/include/asm/system_misc.h index 8e76db83c498..66f6a3ae68d2 100644 --- a/arch/arm/include/asm/system_misc.h +++ b/arch/arm/include/asm/system_misc.h @@ -38,11 +38,6 @@ static inline void harden_branch_predictor(void) extern unsigned int user_debug; -static inline int handle_guest_sea(phys_addr_t addr, unsigned int esr) -{ - return -1; -} - #endif /* !__ASSEMBLY__ */ #endif /* __ASM_ARM_SYSTEM_MISC_H */ diff --git a/arch/arm/include/asm/tcm.h b/arch/arm/include/asm/tcm.h index 8578d726ad78..b845b10fe29a 100644 --- a/arch/arm/include/asm/tcm.h +++ b/arch/arm/include/asm/tcm.h @@ -1,11 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * * Copyright (C) 2008-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 * * Author: Rickard Andersson <rickard.andersson@stericsson.com> * Author: Linus Walleij <linus.walleij@stericsson.com> - * */ #ifndef __ASMARM_TCM_H #define __ASMARM_TCM_H diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 286eb61c632b..0d0d5178e2c3 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/thread_info.h * * Copyright (C) 2002 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_THREAD_INFO_H #define __ASM_ARM_THREAD_INFO_H diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h index 1dc980675894..1c1542e2ed63 100644 --- a/arch/arm/include/asm/thread_notify.h +++ b/arch/arm/include/asm/thread_notify.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/thread_notify.h * * Copyright (C) 2006 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef ASMARM_THREAD_NOTIFY_H #define ASMARM_THREAD_NOTIFY_H diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index f6fcc67ef06e..7c3b3671d6c2 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/timex.h * * Copyright (C) 1997,1998 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Architecture Specific TIME specifications */ #ifndef _ASMARM_TIMEX_H diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index f854148c8d7c..b75ea15b85c0 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/tlb.h * * Copyright (C) 2002 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Experimentation shows that on a StrongARM, it appears to be faster * to use the "invalidate whole tlb" rather than "invalidate single * tlb" for this. @@ -33,271 +30,42 @@ #include <asm/pgalloc.h> #include <asm/tlbflush.h> -#define MMU_GATHER_BUNDLE 8 - -#ifdef CONFIG_HAVE_RCU_TABLE_FREE static inline void __tlb_remove_table(void *_table) { free_page_and_swap_cache((struct page *)_table); } -struct mmu_table_batch { - struct rcu_head rcu; - unsigned int nr; - void *tables[0]; -}; - -#define MAX_TABLE_BATCH \ - ((PAGE_SIZE - sizeof(struct mmu_table_batch)) / sizeof(void *)) - -extern void tlb_table_flush(struct mmu_gather *tlb); -extern void tlb_remove_table(struct mmu_gather *tlb, void *table); - -#define tlb_remove_entry(tlb, entry) tlb_remove_table(tlb, entry) -#else -#define tlb_remove_entry(tlb, entry) tlb_remove_page(tlb, entry) -#endif /* CONFIG_HAVE_RCU_TABLE_FREE */ - -/* - * TLB handling. This allows us to remove pages from the page - * tables, and efficiently handle the TLB issues. - */ -struct mmu_gather { - struct mm_struct *mm; -#ifdef CONFIG_HAVE_RCU_TABLE_FREE - struct mmu_table_batch *batch; - unsigned int need_flush; -#endif - unsigned int fullmm; - struct vm_area_struct *vma; - unsigned long start, end; - unsigned long range_start; - unsigned long range_end; - unsigned int nr; - unsigned int max; - struct page **pages; - struct page *local[MMU_GATHER_BUNDLE]; -}; - -DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); - -/* - * This is unnecessarily complex. There's three ways the TLB shootdown - * code is used: - * 1. Unmapping a range of vmas. See zap_page_range(), unmap_region(). - * tlb->fullmm = 0, and tlb_start_vma/tlb_end_vma will be called. - * tlb->vma will be non-NULL. - * 2. Unmapping all vmas. See exit_mmap(). - * tlb->fullmm = 1, and tlb_start_vma/tlb_end_vma will be called. - * tlb->vma will be non-NULL. Additionally, page tables will be freed. - * 3. Unmapping argument pages. See shift_arg_pages(). - * tlb->fullmm = 0, but tlb_start_vma/tlb_end_vma will not be called. - * tlb->vma will be NULL. - */ -static inline void tlb_flush(struct mmu_gather *tlb) -{ - if (tlb->fullmm || !tlb->vma) - flush_tlb_mm(tlb->mm); - else if (tlb->range_end > 0) { - flush_tlb_range(tlb->vma, tlb->range_start, tlb->range_end); - tlb->range_start = TASK_SIZE; - tlb->range_end = 0; - } -} - -static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr) -{ - if (!tlb->fullmm) { - if (addr < tlb->range_start) - tlb->range_start = addr; - if (addr + PAGE_SIZE > tlb->range_end) - tlb->range_end = addr + PAGE_SIZE; - } -} - -static inline void __tlb_alloc_page(struct mmu_gather *tlb) -{ - unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0); - - if (addr) { - tlb->pages = (void *)addr; - tlb->max = PAGE_SIZE / sizeof(struct page *); - } -} - -static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb) -{ - tlb_flush(tlb); -#ifdef CONFIG_HAVE_RCU_TABLE_FREE - tlb_table_flush(tlb); -#endif -} - -static inline void tlb_flush_mmu_free(struct mmu_gather *tlb) -{ - free_pages_and_swap_cache(tlb->pages, tlb->nr); - tlb->nr = 0; - if (tlb->pages == tlb->local) - __tlb_alloc_page(tlb); -} - -static inline void tlb_flush_mmu(struct mmu_gather *tlb) -{ - tlb_flush_mmu_tlbonly(tlb); - tlb_flush_mmu_free(tlb); -} - -static inline void -arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, - unsigned long start, unsigned long end) -{ - tlb->mm = mm; - tlb->fullmm = !(start | (end+1)); - tlb->start = start; - tlb->end = end; - tlb->vma = NULL; - tlb->max = ARRAY_SIZE(tlb->local); - tlb->pages = tlb->local; - tlb->nr = 0; - __tlb_alloc_page(tlb); +#include <asm-generic/tlb.h> -#ifdef CONFIG_HAVE_RCU_TABLE_FREE - tlb->batch = NULL; +#ifndef CONFIG_HAVE_RCU_TABLE_FREE +#define tlb_remove_table(tlb, entry) tlb_remove_page(tlb, entry) #endif -} static inline void -arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end, bool force) -{ - if (force) { - tlb->range_start = start; - tlb->range_end = end; - } - - tlb_flush_mmu(tlb); - - /* keep the page table cache within bounds */ - check_pgt_cache(); - - if (tlb->pages != tlb->local) - free_pages((unsigned long)tlb->pages, 0); -} - -/* - * Memorize the range for the TLB flush. - */ -static inline void -tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr) -{ - tlb_add_flush(tlb, addr); -} - -#define tlb_remove_huge_tlb_entry(h, tlb, ptep, address) \ - tlb_remove_tlb_entry(tlb, ptep, address) -/* - * In the case of tlb vma handling, we can optimise these away in the - * case where we're doing a full MM flush. When we're doing a munmap, - * the vmas are adjusted to only cover the region to be torn down. - */ -static inline void -tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) -{ - if (!tlb->fullmm) { - flush_cache_range(vma, vma->vm_start, vma->vm_end); - tlb->vma = vma; - tlb->range_start = TASK_SIZE; - tlb->range_end = 0; - } -} - -static inline void -tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) -{ - if (!tlb->fullmm) - tlb_flush(tlb); -} - -static inline bool __tlb_remove_page(struct mmu_gather *tlb, struct page *page) -{ - tlb->pages[tlb->nr++] = page; - VM_WARN_ON(tlb->nr > tlb->max); - if (tlb->nr == tlb->max) - return true; - return false; -} - -static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) -{ - if (__tlb_remove_page(tlb, page)) - tlb_flush_mmu(tlb); -} - -static inline bool __tlb_remove_page_size(struct mmu_gather *tlb, - struct page *page, int page_size) -{ - return __tlb_remove_page(tlb, page); -} - -static inline void tlb_remove_page_size(struct mmu_gather *tlb, - struct page *page, int page_size) -{ - return tlb_remove_page(tlb, page); -} - -static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, - unsigned long addr) +__pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr) { pgtable_page_dtor(pte); -#ifdef CONFIG_ARM_LPAE - tlb_add_flush(tlb, addr); -#else +#ifndef CONFIG_ARM_LPAE /* * With the classic ARM MMU, a pte page has two corresponding pmd * entries, each covering 1MB. */ - addr &= PMD_MASK; - tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); - tlb_add_flush(tlb, addr + SZ_1M); + addr = (addr & PMD_MASK) + SZ_1M; + __tlb_adjust_range(tlb, addr - PAGE_SIZE, 2 * PAGE_SIZE); #endif - tlb_remove_entry(tlb, pte); -} - -static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, - unsigned long addr) -{ -#ifdef CONFIG_ARM_LPAE - tlb_add_flush(tlb, addr); - tlb_remove_entry(tlb, virt_to_page(pmdp)); -#endif + tlb_remove_table(tlb, pte); } static inline void -tlb_remove_pmd_tlb_entry(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr) -{ - tlb_add_flush(tlb, addr); -} - -#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr) -#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr) -#define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp) - -#define tlb_migrate_finish(mm) do { } while (0) - -#define tlb_remove_check_page_size_change tlb_remove_check_page_size_change -static inline void tlb_remove_check_page_size_change(struct mmu_gather *tlb, - unsigned int page_size) +__pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr) { -} - -static inline void tlb_flush_remove_tables(struct mm_struct *mm) -{ -} +#ifdef CONFIG_ARM_LPAE + struct page *page = virt_to_page(pmdp); -static inline void tlb_flush_remove_tables_local(void *arg) -{ + tlb_remove_table(tlb, page); +#endif } #endif /* CONFIG_MMU */ diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 1897b5196fb5..24cbfc112dfa 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/tlbflush.h * * Copyright (C) 1999-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASMARM_TLBFLUSH_H #define _ASMARM_TLBFLUSH_H diff --git a/arch/arm/include/asm/trusted_foundations.h b/arch/arm/include/asm/trusted_foundations.h deleted file mode 100644 index 00748350cf72..000000000000 --- a/arch/arm/include/asm/trusted_foundations.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright (c) 2013, NVIDIA Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -/* - * Support for the Trusted Foundations secure monitor. - * - * Trusted Foundation comes active on some ARM consumer devices (most - * Tegra-based devices sold on the market are concerned). Such devices can only - * perform some basic operations, like setting the CPU reset vector, through - * SMC calls to the secure monitor. The calls are completely specific to - * Trusted Foundations, and do *not* follow the SMC calling convention or the - * PSCI standard. - */ - -#ifndef __ASM_ARM_TRUSTED_FOUNDATIONS_H -#define __ASM_ARM_TRUSTED_FOUNDATIONS_H - -#include <linux/printk.h> -#include <linux/bug.h> -#include <linux/of.h> -#include <linux/cpu.h> -#include <linux/smp.h> - -struct trusted_foundations_platform_data { - unsigned int version_major; - unsigned int version_minor; -}; - -#if IS_ENABLED(CONFIG_TRUSTED_FOUNDATIONS) - -void register_trusted_foundations(struct trusted_foundations_platform_data *pd); -void of_register_trusted_foundations(void); - -#else /* CONFIG_TRUSTED_FOUNDATIONS */ - -static inline void register_trusted_foundations( - struct trusted_foundations_platform_data *pd) -{ - /* - * If the system requires TF and we cannot provide it, continue booting - * but disable features that cannot be provided. - */ - pr_err("No support for Trusted Foundations, continuing in degraded mode.\n"); - pr_err("Secondary processors as well as CPU PM will be disabled.\n"); -#if IS_ENABLED(CONFIG_SMP) - setup_max_cpus = 0; -#endif - cpu_idle_poll_ctrl(true); -} - -static inline void of_register_trusted_foundations(void) -{ - /* - * If we find the target should enable TF but does not support it, - * fail as the system won't be able to do much anyway - */ - if (of_find_compatible_node(NULL, NULL, "tlm,trusted-foundations")) - register_trusted_foundations(NULL); -} -#endif /* CONFIG_TRUSTED_FOUNDATIONS */ - -#endif diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 42aa4a22803c..303248e5b990 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/uaccess.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASMARM_UACCESS_H #define _ASMARM_UACCESS_H @@ -59,7 +56,6 @@ extern int __put_user_bad(void); * Note that this is actually 0x1,0000,0000 */ #define KERNEL_DS 0x00000000 -#define get_ds() (KERNEL_DS) #ifdef CONFIG_MMU @@ -86,7 +82,8 @@ static inline void set_fs(mm_segment_t fs) #define __range_ok(addr, size) ({ \ unsigned long flag, roksum; \ __chk_user_ptr(addr); \ - __asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \ + __asm__(".syntax unified\n" \ + "adds %1, %2, %3; sbcscc %1, %1, %0; movcc %0, #0" \ : "=&r" (flag), "=&r" (roksum) \ : "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \ : "cc"); \ @@ -112,10 +109,11 @@ static inline void __user *__uaccess_mask_range_ptr(const void __user *ptr, unsigned long tmp; asm volatile( + " .syntax unified\n" " sub %1, %3, #1\n" " subs %1, %1, %0\n" " addhs %1, %1, #1\n" - " subhss %1, %1, %2\n" + " subshs %1, %1, %2\n" " movlo %0, #0\n" : "+r" (safe_ptr), "=&r" (tmp) : "r" (size), "r" (current_thread_info()->addr_limit) diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h index 2c3b952be63e..1e2c3eb04353 100644 --- a/arch/arm/include/asm/unified.h +++ b/arch/arm/include/asm/unified.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * include/asm-arm/unified.h - Unified Assembler Syntax helper macros * * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_UNIFIED_H diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 88ef2ce1f69a..9fb00973c608 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/unistd.h * * Copyright (C) 2001-2005 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Please forward _all_ changes to this file to rmk@arm.linux.org.uk, * no matter what the change is. Thanks! */ @@ -26,10 +23,10 @@ #define __ARCH_WANT_SYS_SIGPROCMASK #define __ARCH_WANT_SYS_OLD_MMAP #define __ARCH_WANT_SYS_OLD_SELECT -#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_UTIME32 #if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT) -#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_TIME32 #define __ARCH_WANT_SYS_IPC #define __ARCH_WANT_SYS_OLDUMOUNT #define __ARCH_WANT_SYS_ALARM @@ -45,7 +42,6 @@ * Unimplemented (or alternatively implemented) syscalls */ #define __IGNORE_fadvise64_64 -#define __IGNORE_migrate_pages #ifdef __ARM_EABI__ /* diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h index d1c3f3a71c94..6e282c33126b 100644 --- a/arch/arm/include/asm/unwind.h +++ b/arch/arm/include/asm/unwind.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/unwind.h * * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_UNWIND_H diff --git a/arch/arm/include/asm/uprobes.h b/arch/arm/include/asm/uprobes.h index 9472c20b7d49..6a61b2874926 100644 --- a/arch/arm/include/asm/uprobes.h +++ b/arch/arm/include/asm/uprobes.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 Rabin Vincent <rabin at rab.in> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _ASM_UPROBES_H diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h index 187ccf6496ad..2cb00d15831b 100644 --- a/arch/arm/include/asm/v7m.h +++ b/arch/arm/include/asm/v7m.h @@ -49,7 +49,7 @@ * (0 -> msp; 1 -> psp). Bits [1:0] are fixed to 0b01. */ #define EXC_RET_STACK_MASK 0x00000004 -#define EXC_RET_THREADMODE_PROCESSSTACK 0xfffffffd +#define EXC_RET_THREADMODE_PROCESSSTACK (3 << 2) /* Cache related definitions */ diff --git a/arch/arm/include/asm/vdso_datapage.h b/arch/arm/include/asm/vdso_datapage.h index 9be259442fca..7910abf89b1c 100644 --- a/arch/arm/include/asm/vdso_datapage.h +++ b/arch/arm/include/asm/vdso_datapage.h @@ -1,19 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Adapted from arm64 version. * * Copyright (C) 2012 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __ASM_VDSO_DATAPAGE_H #define __ASM_VDSO_DATAPAGE_H diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index ef5dfedacd8d..628c336e8e3b 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -29,13 +29,13 @@ ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] tst \tmp, #HWCAP_VFPD32 - ldcnel p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + ldclne p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field cmp \tmp, #2 @ 32 x 64bit registers? - ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + ldcleq p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #endif #endif @@ -53,13 +53,13 @@ ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] tst \tmp, #HWCAP_VFPD32 - stcnel p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + stclne p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field cmp \tmp, #2 @ 32 x 64bit registers? - stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + stcleq p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #endif #endif diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h index 141144f333a2..17c26ccd126d 100644 --- a/arch/arm/include/asm/virt.h +++ b/arch/arm/include/asm/virt.h @@ -1,19 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (c) 2012 Linaro Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ #ifndef VIRT_H diff --git a/arch/arm/include/asm/xor.h b/arch/arm/include/asm/xor.h index 4ffb26d4cad8..aefddec79286 100644 --- a/arch/arm/include/asm/xor.h +++ b/arch/arm/include/asm/xor.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/xor.h * * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/hardirq.h> #include <asm-generic/xor.h> diff --git a/arch/arm/include/debug/8250.S b/arch/arm/include/debug/8250.S index 7f7446f6f806..e4a036f082c2 100644 --- a/arch/arm/include/debug/8250.S +++ b/arch/arm/include/debug/8250.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/debug/8250.S * * Copyright (C) 1994-2013 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/serial_reg.h> diff --git a/arch/arm/include/debug/asm9260.S b/arch/arm/include/debug/asm9260.S index 292f85b49fca..0da1eb625331 100644 --- a/arch/arm/include/debug/asm9260.S +++ b/arch/arm/include/debug/asm9260.S @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* Debugging macro include header * * Copyright (C) 1994-1999 Russell King * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks * Modified for ASM9260 by Oleksij Remepl <linux@rempel-privat.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ .macro addruart, rp, rv, tmp diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S index 0098401e5aeb..6c91cbaaa20b 100644 --- a/arch/arm/include/debug/at91.S +++ b/arch/arm/include/debug/at91.S @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2003-2005 SAN People * * Debugging macro include header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #define AT91_DBGU_SR (0x14) /* Status Register */ diff --git a/arch/arm/include/debug/bcm63xx.S b/arch/arm/include/debug/bcm63xx.S index e7164d570f44..06a896227396 100644 --- a/arch/arm/include/debug/bcm63xx.S +++ b/arch/arm/include/debug/bcm63xx.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Broadcom BCM63xx low-level UART debug * * Copyright (C) 2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/serial_bcm63xx.h> diff --git a/arch/arm/include/debug/clps711x.S b/arch/arm/include/debug/clps711x.S index c17ac5c9e5f3..774a67ac3877 100644 --- a/arch/arm/include/debug/clps711x.S +++ b/arch/arm/include/debug/clps711x.S @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef CONFIG_DEBUG_CLPS711X_UART2 diff --git a/arch/arm/include/debug/dc21285.S b/arch/arm/include/debug/dc21285.S index 02247f313e94..d7e8c71706ab 100644 --- a/arch/arm/include/debug/dc21285.S +++ b/arch/arm/include/debug/dc21285.S @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* arch/arm/mach-footbridge/include/mach/debug-macro.S * * Debugging macro include header * * Copyright (C) 1994-1999 Russell King * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <asm/hardware/dec21285.h> diff --git a/arch/arm/include/debug/digicolor.S b/arch/arm/include/debug/digicolor.S index c9517150766a..256f5f4da275 100644 --- a/arch/arm/include/debug/digicolor.S +++ b/arch/arm/include/debug/digicolor.S @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Debugging macro include header for Conexant Digicolor USART * * Copyright (C) 2014 Paradox Innovation Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #define UA0_STATUS 0x0742 diff --git a/arch/arm/include/debug/efm32.S b/arch/arm/include/debug/efm32.S index 660fa1e4b77b..5ed5028306f4 100644 --- a/arch/arm/include/debug/efm32.S +++ b/arch/arm/include/debug/efm32.S @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2013 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define UARTn_CMD 0x000c diff --git a/arch/arm/include/debug/icedcc.S b/arch/arm/include/debug/icedcc.S index 43afcb021fa3..74a0dd036a17 100644 --- a/arch/arm/include/debug/icedcc.S +++ b/arch/arm/include/debug/icedcc.S @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/debug/icedcc.S * * Copyright (C) 1994-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ @@ debug using ARM EmbeddedICE DCC channel diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h index bce58e975ad1..c8eb83d4b896 100644 --- a/arch/arm/include/debug/imx-uart.h +++ b/arch/arm/include/debug/imx-uart.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012-2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __DEBUG_IMX_UART_H diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S index 92c44760d656..1c1b9d1da4c8 100644 --- a/arch/arm/include/debug/imx.S +++ b/arch/arm/include/debug/imx.S @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* arch/arm/mach-imx/include/mach/debug-macro.S * * Debugging macro include header * * Copyright (C) 1994-1999 Russell King * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <asm/assembler.h> diff --git a/arch/arm/include/debug/ks8695.S b/arch/arm/include/debug/ks8695.S index 961da1f32ab3..eb4d371b5eea 100644 --- a/arch/arm/include/debug/ks8695.S +++ b/arch/arm/include/debug/ks8695.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/debug/ks8695.S * @@ -5,10 +6,6 @@ * Copyright (C) 2006 Simtec Electronics * * KS8695 - Debug macros - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define KS8695_UART_PA 0x03ffe000 diff --git a/arch/arm/include/debug/meson.S b/arch/arm/include/debug/meson.S index 1bae99bf6f11..1e501a0054ae 100644 --- a/arch/arm/include/debug/meson.S +++ b/arch/arm/include/debug/meson.S @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2014 Carlo Caione * Carlo Caione <carlo@caione.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define MESON_AO_UART_WFIFO 0x0 diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S index b03024fa671f..9405b71461da 100644 --- a/arch/arm/include/debug/msm.S +++ b/arch/arm/include/debug/msm.S @@ -1,18 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * * Copyright (C) 2007 Google, Inc. * Copyright (c) 2011, Code Aurora Forum. All rights reserved. * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ .macro addruart, rp, rv, tmp diff --git a/arch/arm/include/debug/netx.S b/arch/arm/include/debug/netx.S index 81e1b2af70f7..08afc58885d3 100644 --- a/arch/arm/include/debug/netx.S +++ b/arch/arm/include/debug/netx.S @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Debugging macro include header * * Copyright (C) 1994-1999 Russell King * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #define UART_DATA 0 diff --git a/arch/arm/include/debug/omap2plus.S b/arch/arm/include/debug/omap2plus.S index 192a7583999c..b5696a33ba0f 100644 --- a/arch/arm/include/debug/omap2plus.S +++ b/arch/arm/include/debug/omap2plus.S @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Debugging macro include header * * Copyright (C) 1994-1999 Russell King * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/serial_reg.h> diff --git a/arch/arm/include/debug/pl01x.S b/arch/arm/include/debug/pl01x.S index f7d8323cefcc..a2a553afe7b8 100644 --- a/arch/arm/include/debug/pl01x.S +++ b/arch/arm/include/debug/pl01x.S @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* arch/arm/include/debug/pl01x.S * * Debugging macro include header * * Copyright (C) 1994-1999 Russell King * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/amba/serial.h> diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S index b1f54dc4888c..af873b526677 100644 --- a/arch/arm/include/debug/s3c24xx.S +++ b/arch/arm/include/debug/s3c24xx.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* arch/arm/mach-s3c2410/include/mach/debug-macro.S * * Debugging macro include header @@ -6,10 +7,6 @@ * Copyright (C) 2005 Simtec Electronics * * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/serial_s3c.h> diff --git a/arch/arm/include/debug/s5pv210.S b/arch/arm/include/debug/s5pv210.S index 4f1a73e2c1a1..820a1cfb0595 100644 --- a/arch/arm/include/debug/s5pv210.S +++ b/arch/arm/include/debug/s5pv210.S @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* pull in the relevant register and map files. */ diff --git a/arch/arm/include/debug/sa1100.S b/arch/arm/include/debug/sa1100.S index a0ae4f4cd924..6109e6058e5b 100644 --- a/arch/arm/include/debug/sa1100.S +++ b/arch/arm/include/debug/sa1100.S @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* arch/arm/include/debug/sa1100.S * * Debugging macro include header * * Copyright (C) 1994-1999 Russell King * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #define UTCR3 0x0c diff --git a/arch/arm/include/debug/sirf.S b/arch/arm/include/debug/sirf.S index 630f231f2f37..e73e4de0a015 100644 --- a/arch/arm/include/debug/sirf.S +++ b/arch/arm/include/debug/sirf.S @@ -1,9 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-prima2/include/mach/debug-macro.S * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ #define SIRF_LLUART_TXFIFO_STATUS 0x0114 diff --git a/arch/arm/include/debug/sti.S b/arch/arm/include/debug/sti.S index e3aa58ff1776..6b42c91f217d 100644 --- a/arch/arm/include/debug/sti.S +++ b/arch/arm/include/debug/sti.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/debug/sti.S * * Debugging macro include header * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define STIH41X_COMMS_BASE 0xfed00000 diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S index 3bc80599c022..2148d0f88591 100644 --- a/arch/arm/include/debug/tegra.S +++ b/arch/arm/include/debug/tegra.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2010,2011 Google, Inc. * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved. @@ -10,16 +11,6 @@ * * Portions based on mach-omap2's debug-macro.S * Copyright (C) 1994-1999 Russell King - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #include <linux/serial_reg.h> @@ -173,7 +164,7 @@ .macro senduart, rd, rx cmp \rx, #0 - strneb \rd, [\rx, #UART_TX << UART_SHIFT] + strbne \rd, [\rx, #UART_TX << UART_SHIFT] 1001: .endm diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S index aa7f63a8b5e0..c626f89b3e4a 100644 --- a/arch/arm/include/debug/ux500.S +++ b/arch/arm/include/debug/ux500.S @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Debugging macro include header * * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ diff --git a/arch/arm/include/debug/vexpress.S b/arch/arm/include/debug/vexpress.S index 524acd5a223e..ccb22e9a86a3 100644 --- a/arch/arm/include/debug/vexpress.S +++ b/arch/arm/include/debug/vexpress.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* arch/arm/mach-realview/include/mach/debug-macro.S * * Debugging macro include header * * Copyright (C) 1994-1999 Russell King * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define DEBUG_LL_PHYS_BASE 0x10000000 diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S index b88933849a17..854d9bd82770 100644 --- a/arch/arm/include/debug/vf.S +++ b/arch/arm/include/debug/vf.S @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #define VF_UART0_BASE_ADDR 0x40027000 diff --git a/arch/arm/include/debug/vt8500.S b/arch/arm/include/debug/vt8500.S index 0e0ca0869da7..8dc1df2d91b8 100644 --- a/arch/arm/include/debug/vt8500.S +++ b/arch/arm/include/debug/vt8500.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Debugging macro include header * * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> * Moved from arch/arm/mach-vt8500/include/mach/debug-macro.S * Minor changes for readability. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define DEBUG_LL_PHYS_BASE 0xD8000000 diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S index 060cb5b49bfd..58d77c972fd6 100644 --- a/arch/arm/include/debug/zynq.S +++ b/arch/arm/include/debug/zynq.S @@ -1,16 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Debugging macro include header * * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #define UART_CR_OFFSET 0x00 /* Control Register [8:0] */ #define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */ diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild index eee8f7d23899..ce8573157774 100644 --- a/arch/arm/include/uapi/asm/Kbuild +++ b/arch/arm/include/uapi/asm/Kbuild @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -include include/uapi/asm-generic/Kbuild.asm generated-y += unistd-common.h generated-y += unistd-oabi.h generated-y += unistd-eabi.h +generic-y += kvm_para.h diff --git a/arch/arm/include/uapi/asm/kvm_para.h b/arch/arm/include/uapi/asm/kvm_para.h deleted file mode 100644 index baacc4996d18..000000000000 --- a/arch/arm/include/uapi/asm/kvm_para.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include <asm-generic/kvm_para.h> diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c index 1791f12c180b..c125582de2e7 100644 --- a/arch/arm/kernel/arch_timer.c +++ b/arch/arm/kernel/arch_timer.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/arch_timer.c * * Copyright (C) 2011 ARM Ltd. * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/types.h> diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 8fa2dc21d332..98bdea51089d 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/armksyms.c * * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/export.h> #include <linux/sched.h> diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 28b27104ac0c..c773b829ee8e 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 1995-2003 Russell King * 2001-2002 Keith Owens @@ -5,10 +6,6 @@ * Generate definitions needed by assembly language modules. * This code generates raw asm output which is post-processed to extract * and format the required data. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/compiler.h> #include <linux/sched.h> diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h index 201100226301..067e12edc341 100644 --- a/arch/arm/kernel/atags.h +++ b/arch/arm/kernel/atags.h @@ -5,7 +5,7 @@ void convert_to_tag_list(struct tag *tags); const struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr); #else -static inline const struct machine_desc * +static inline const struct machine_desc * __init __noreturn setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) { early_print("no ATAGS support: can't continue\n"); diff --git a/arch/arm/kernel/atags_compat.c b/arch/arm/kernel/atags_compat.c index 05c28b12353c..10da11c212cc 100644 --- a/arch/arm/kernel/atags_compat.c +++ b/arch/arm/kernel/atags_compat.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/atags_compat.c * * Copyright (C) 2001 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * We keep the old params compatibility cruft in one place (here) * so we don't end up with lots of mess around other places. * diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c index a8a4333929f5..ce02f92f4ab2 100644 --- a/arch/arm/kernel/atags_parse.c +++ b/arch/arm/kernel/atags_parse.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Tag parsing. * * Copyright (C) 1995-2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/kernel/bugs.c b/arch/arm/kernel/bugs.c index d41d3598e5e5..14c8dbbb7d2d 100644 --- a/arch/arm/kernel/bugs.c +++ b/arch/arm/kernel/bugs.c @@ -1,4 +1,4 @@ -// SPDX-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0 #include <linux/init.h> #include <asm/bugs.h> #include <asm/proc-fns.h> diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c index fda5579123a8..093368e0d020 100644 --- a/arch/arm/kernel/cpuidle.c +++ b/arch/arm/kernel/cpuidle.c @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/cpuidle.h> diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c index 5d1286d51154..53cb92435392 100644 --- a/arch/arm/kernel/crash_dump.c +++ b/arch/arm/kernel/crash_dump.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/kernel/crash_dump.c * @@ -7,10 +8,6 @@ * This code is taken from arch/x86/kernel/crash_dump_64.c * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) * Copyright (C) IBM Corporation, 2004. All rights reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/errno.h> diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index b795dc2408c0..e112072b579d 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/kernel/debug.S * * Copyright (C) 1994-1999 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * 32-bit debugging code */ #include <linux/linkage.h> @@ -86,7 +83,7 @@ hexbuf_rel: .long hexbuf_addr - . ENTRY(printascii) addruart_current r3, r1, r2 1: teq r0, #0 - ldrneb r1, [r0], #1 + ldrbne r1, [r0], #1 teqne r1, #0 reteq lr 2: teq r1, #'\n' diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index e3057c1b55b9..39c978698406 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/devtree.c * * Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c index 84363fe7bad2..2d90ecce5a11 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/kernel/dma-isa.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/dma-isa.c * * Copyright (C) 1999-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ISA DMA primitives * Taken from various sources, including: * linux/include/asm/dma.h: Defines for using and allocating dma channels. @@ -55,6 +52,12 @@ static int isa_get_dma_residue(unsigned int chan, dma_t *dma) return chan < 4 ? count : (count << 1); } +static struct device isa_dma_dev = { + .init_name = "fallback device", + .coherent_dma_mask = ~(dma_addr_t)0, + .dma_mask = &isa_dma_dev.coherent_dma_mask, +}; + static void isa_enable_dma(unsigned int chan, dma_t *dma) { if (dma->invalid) { @@ -89,7 +92,7 @@ static void isa_enable_dma(unsigned int chan, dma_t *dma) dma->sg = &dma->buf; dma->sgcount = 1; dma->buf.length = dma->count; - dma->buf.dma_address = dma_map_single(NULL, + dma->buf.dma_address = dma_map_single(&isa_dma_dev, dma->addr, dma->count, direction); } diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index 6739d37c2bc5..ba15b8666498 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/dma.c * * Copyright (C) 1995-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Front-end to the DMA handling. This handles the allocation/freeing * of DMA channels, and provides a unified interface to the machines * DMA facilities. diff --git a/arch/arm/kernel/early_printk.c b/arch/arm/kernel/early_printk.c index 9257736ec9fa..03239ca0d5ce 100644 --- a/arch/arm/kernel/early_printk.c +++ b/arch/arm/kernel/early_printk.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/early_printk.c * * Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/kernel/efi.c b/arch/arm/kernel/efi.c index 9f43ba012d10..ed005870671a 100644 --- a/arch/arm/kernel/efi.c +++ b/arch/arm/kernel/efi.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/efi.h> diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index e85a3af9ddeb..0b8cfdd60b90 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/kernel/entry-armv.S * @@ -5,10 +6,6 @@ * ARM700 fix by Matthew Godbolt (linux-user@willothewisp.demon.co.uk) * nommu support by Hyok S. Choi (hyok.choi@samsung.com) * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Low-level vector interface routines * * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction @@ -636,7 +633,7 @@ call_fpe: @ Test if we need to give access to iWMMXt coprocessors ldr r5, [r10, #TI_FLAGS] rsbs r7, r8, #(1 << 8) @ CP 0 or 1 only - movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1) + movscs r7, r5, lsr #(TIF_USING_IWMMXT + 1) bcs iwmmxt_task_enable #endif ARM( add pc, pc, r8, lsr #6 ) @@ -872,7 +869,7 @@ __kuser_cmpxchg64: @ 0xffff0f60 smp_dmb arm 1: ldrexd r0, r1, [r2] @ load current val eors r3, r0, r4 @ compare with oldval (1) - eoreqs r3, r1, r5 @ compare with oldval (2) + eorseq r3, r1, r5 @ compare with oldval (2) strexdeq r3, r6, r7, [r2] @ store newval if eq teqeq r3, #1 @ success? beq 1b @ if no then retry @@ -896,8 +893,8 @@ __kuser_cmpxchg64: @ 0xffff0f60 ldmia r1, {r6, lr} @ load new val 1: ldmia r2, {r0, r1} @ load current val eors r3, r0, r4 @ compare with oldval (1) - eoreqs r3, r1, r5 @ compare with oldval (2) -2: stmeqia r2, {r6, lr} @ store newval if eq + eorseq r3, r1, r5 @ compare with oldval (2) +2: stmiaeq r2, {r6, lr} @ store newval if eq rsbs r0, r3, #0 @ set return val and C flag ldmfd sp!, {r4, r5, r6, pc} @@ -911,7 +908,7 @@ kuser_cmpxchg64_fixup: mov r7, #0xffff0fff sub r7, r7, #(0xffff0fff - (0xffff0f60 + (1b - __kuser_cmpxchg64))) subs r8, r4, r7 - rsbcss r8, r8, #(2b - 1b) + rsbscs r8, r8, #(2b - 1b) strcs r7, [sp, #S_PC] #if __LINUX_ARM_ARCH__ < 6 bcc kuser_cmpxchg32_fixup @@ -969,7 +966,7 @@ kuser_cmpxchg32_fixup: mov r7, #0xffff0fff sub r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg))) subs r8, r4, r7 - rsbcss r8, r8, #(2b - 1b) + rsbscs r8, r8, #(2b - 1b) strcs r7, [sp, #S_PC] ret lr .previous diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 0465d65d23de..271cb8a1eba1 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/kernel/entry-common.S * * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <asm/assembler.h> @@ -373,7 +370,7 @@ sys_syscall: movhs scno, #0 csdb #endif - stmloia sp, {r5, r6} @ shuffle args + stmialo sp, {r5, r6} @ shuffle args movlo r0, r1 movlo r1, r2 movlo r2, r3 diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S index 0be69e551a64..a74289ebc803 100644 --- a/arch/arm/kernel/entry-ftrace.S +++ b/arch/arm/kernel/entry-ftrace.S @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +/* SPDX-License-Identifier: GPL-2.0-only */ #include <asm/assembler.h> #include <asm/ftrace.h> diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 773424843d6e..32051ec5b33f 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -127,7 +127,8 @@ */ .macro v7m_exception_slow_exit ret_r0 cpsid i - ldr lr, =EXC_RET_THREADMODE_PROCESSSTACK + ldr lr, =exc_ret + ldr lr, [lr] @ read original r12, sp, lr, pc and xPSR add r12, sp, #S_IP @@ -387,8 +388,8 @@ badr lr, \ret @ return address .if \reload add r1, sp, #S_R0 + S_OFF @ pointer to regs - ldmccia r1, {r0 - r6} @ reload r0-r6 - stmccia sp, {r4, r5} @ update stack arguments + ldmiacc r1, {r0 - r6} @ reload r0-r6 + stmiacc sp, {r4, r5} @ update stack arguments .endif ldrcc pc, [\table, \tmp, lsl #2] @ call sys_* routine #else @@ -396,8 +397,8 @@ badr lr, \ret @ return address .if \reload add r1, sp, #S_R0 + S_OFF @ pointer to regs - ldmccia r1, {r0 - r6} @ reload r0-r6 - stmccia sp, {r4, r5} @ update stack arguments + ldmiacc r1, {r0 - r6} @ reload r0-r6 + stmiacc sp, {r4, r5} @ update stack arguments .endif ldrcc pc, [\table, \nr, lsl #2] @ call sys_* routine #endif diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S index abcf47848525..de1f20624be1 100644 --- a/arch/arm/kernel/entry-v7m.S +++ b/arch/arm/kernel/entry-v7m.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/kernel/entry-v7m.S * * Copyright (C) 2008 ARM Ltd. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Low-level vector interface routines for the ARMv7-M architecture */ #include <asm/memory.h> @@ -146,3 +143,7 @@ ENTRY(vector_table) .rept CONFIG_CPU_V7M_NUM_IRQ .long __irq_entry @ External Interrupts .endr + .align 2 + .globl exc_ret +exc_ret: + .space 4 diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 997b02302c31..a7810be07da1 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/kernel/head-common.S * * Copyright (C) 1994-2002 Russell King * Copyright (c) 2003 ARM Limited * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <asm/assembler.h> diff --git a/arch/arm/kernel/head-inflate-data.c b/arch/arm/kernel/head-inflate-data.c index 6dd0ce5e6058..89a52104d32a 100644 --- a/arch/arm/kernel/head-inflate-data.c +++ b/arch/arm/kernel/head-inflate-data.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * XIP kernel .data segment decompressor * * Created by: Nicolas Pitre, August 2017 * Copyright: (C) 2017 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index ec29de250076..afa350f44dea 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -1,15 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/kernel/head-nommu.S * * Copyright (C) 1994-2002 Russell King * Copyright (C) 2003-2006 Hyok S. Choi * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Common kernel startup code (non-paged MM) - * */ #include <linux/linkage.h> #include <linux/init.h> @@ -133,9 +129,9 @@ __secondary_data: */ .text __after_proc_init: -#ifdef CONFIG_ARM_MPU M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB) M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB) +#ifdef CONFIG_ARM_MPU M_CLASS(ldr r3, [r12, 0x50]) AR_CLASS(mrc p15, 0, r3, c0, c1, 4) @ Read ID_MMFR0 and r3, r3, #(MMFR0_PMSA) @ PMSA field @@ -439,8 +435,8 @@ M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(3)]) str r5, [r12, #PMSAv8_RBAR_A(0)] str r6, [r12, #PMSAv8_RLAR_A(0)] #else - mcr p15, 0, r5, c6, c10, 1 @ PRBAR4 - mcr p15, 0, r6, c6, c10, 2 @ PRLAR4 + mcr p15, 0, r5, c6, c10, 0 @ PRBAR4 + mcr p15, 0, r6, c6, c10, 1 @ PRLAR4 #endif #endif ret lr diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 4485d0404514..c49b39340ddb 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/kernel/head.S * @@ -5,10 +6,6 @@ * Copyright (c) 2003 ARM Limited * All Rights Reserved * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Kernel startup code for all 32-bit CPUs */ #include <linux/linkage.h> diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c index b09561a6d06a..2373020af965 100644 --- a/arch/arm/kernel/hibernate.c +++ b/arch/arm/kernel/hibernate.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hibernation support specific for ARM * @@ -11,8 +12,6 @@ * https://patchwork.kernel.org/patch/96442/ * * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> - * - * License terms: GNU General Public License (GPL) version 2 */ #include <linux/mm.h> diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 1d5fbf1d1c67..af8b8e15f589 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -1,16 +1,5 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * Copyright (C) 2009, 2010 ARM Limited * diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 60146e32619a..ae5020302de4 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -1,19 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (c) 2012 Linaro Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ #include <linux/init.h> @@ -180,8 +167,8 @@ ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE @ Check whether GICv3 system registers are available mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1 ubfx r7, r7, #28, #4 - cmp r7, #1 - bne 2f + teq r7, #0 + beq 2f @ Enable system register accesses mrc p15, 4, r7, c12, c9, 5 @ ICC_HSRE diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 844861368cd5..ee514034c0a1 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/irq.c * @@ -8,10 +9,6 @@ * Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file contains the code used by various IRQ handling routines: * asking for different IRQ's should be done through these routines * instead of just grabbing them. Thus setups with different IRQ numbers diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c index 9d1cf7156895..d8a509c5d5bd 100644 --- a/arch/arm/kernel/isa.c +++ b/arch/arm/kernel/isa.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * linux/arch/arm/kernel/isa.c * * Copyright (C) 1999 Phil Blundell * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * * ISA shared memory and I/O port support, and is required to support * iopl, inb, outb and friends in userspace via glibc emulation. */ diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index 81cd4d43b3ec..0dcae787b004 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/kernel/iwmmxt.S * @@ -8,10 +9,6 @@ * * Full lazy switching support, optimizations and more, by Nicolas Pitre * Copyright (c) 2003-2004, MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index dd2eb5f76b9f..76300f3813e8 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -91,8 +91,11 @@ void machine_crash_nonpanic_core(void *unused) set_cpu_online(smp_processor_id(), false); atomic_dec(&waiting_for_crash_ipi); - while (1) + + while (1) { cpu_relax(); + wfe(); + } } void crash_smp_send_stop(void) diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c index 3d0c2e4dda1d..b647741c0ab0 100644 --- a/arch/arm/kernel/module-plts.c +++ b/arch/arm/kernel/module-plts.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014-2017 Linaro Ltd. <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/elf.h> diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 3ff571c2c71c..b3d439c41c7b 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/module.c * * Copyright (C) 2002 Russell King. * Modified for nommu by Hyok S. Choi * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Module allocation method suggested by Andi Kleen. */ #include <linux/module.h> diff --git a/arch/arm/kernel/opcodes.c b/arch/arm/kernel/opcodes.c index f8179c6a817f..651914947443 100644 --- a/arch/arm/kernel/opcodes.c +++ b/arch/arm/kernel/opcodes.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/opcodes.c * * A32 condition code lookup feature moved from nwfpe/fpopcode.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/kernel/paravirt.c b/arch/arm/kernel/paravirt.c index 75c158b0353f..4cfed91fe256 100644 --- a/arch/arm/kernel/paravirt.c +++ b/arch/arm/kernel/paravirt.c @@ -1,12 +1,5 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. * * Copyright (C) 2013 Citrix Systems * diff --git a/arch/arm/kernel/patch.c b/arch/arm/kernel/patch.c index a50dc00d79a2..d0a05a3bdb96 100644 --- a/arch/arm/kernel/patch.c +++ b/arch/arm/kernel/patch.c @@ -16,7 +16,7 @@ struct patch { unsigned int insn; }; -static DEFINE_SPINLOCK(patch_lock); +static DEFINE_RAW_SPINLOCK(patch_lock); static void __kprobes *patch_map(void *addr, int fixmap, unsigned long *flags) __acquires(&patch_lock) @@ -33,7 +33,7 @@ static void __kprobes *patch_map(void *addr, int fixmap, unsigned long *flags) return addr; if (flags) - spin_lock_irqsave(&patch_lock, *flags); + raw_spin_lock_irqsave(&patch_lock, *flags); else __acquire(&patch_lock); @@ -48,7 +48,7 @@ static void __kprobes patch_unmap(int fixmap, unsigned long *flags) clear_fixmap(fixmap); if (flags) - spin_unlock_irqrestore(&patch_lock, *flags); + raw_spin_unlock_irqrestore(&patch_lock, *flags); else __release(&patch_lock); } diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c index 7c9248b74d3f..1d1fb22f44f3 100644 --- a/arch/arm/kernel/pj4-cp0.c +++ b/arch/arm/kernel/pj4-cp0.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/pj4-cp0.c * * PJ4 iWMMXt coprocessor context switching and handling * * Copyright (c) 2010 Marvell International Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/types.h> diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 16601d1442d1..f934a6739fc0 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/process.c * * Copyright (C) 1996-2000 Russell King - Converted to ARM. * Original Copyright (C) 1995 Linus Torvalds - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <stdarg.h> @@ -150,7 +147,7 @@ void __show_regs(struct pt_regs *regs) if ((domain & domain_mask(DOMAIN_USER)) == domain_val(DOMAIN_USER, DOMAIN_NOACCESS)) segment = "none"; - else if (fs == get_ds()) + else if (fs == KERNEL_DS) segment = "kernel"; else segment = "user"; diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index cb3fcaeb2233..aba6b2ab7a58 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -1,12 +1,5 @@ +// SPDX-License-Identifier: GPL-2.0-only /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. * * Copyright (C) 2012 ARM Limited * diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 6fa5b6387556..afcb4d3b14dc 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/ptrace.c * * By Ross Biro 1/23/92 * edited by Linus Torvalds * ARM modifications Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/sched/signal.h> diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c index 3b2aa9a9fe26..bb18ed0539f4 100644 --- a/arch/arm/kernel/reboot.c +++ b/arch/arm/kernel/reboot.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 1996-2000 Russell King - Converted to ARM. * Original Copyright (C) 1995 Linus Torvalds - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/cpu.h> #include <linux/delay.h> diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c index 36ed35073289..b0d2f1fe891d 100644 --- a/arch/arm/kernel/return_address.c +++ b/arch/arm/kernel/return_address.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/kernel/return_address.c * * Copyright (C) 2009 Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> * for Pengutronix - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. */ #include <linux/export.h> #include <linux/ftrace.h> diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 375b13f7e780..d0a464e317ea 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/setup.c * * Copyright (C) 1995-2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/efi.h> #include <linux/export.h> @@ -867,6 +864,9 @@ static void __init request_standard_resources(const struct machine_desc *mdesc) boot_alias_start = phys_to_idmap(start); if (arm_has_idmap_alias() && boot_alias_start != IDMAP_INVALID_ADDR) { res = memblock_alloc(sizeof(*res), SMP_CACHE_BYTES); + if (!res) + panic("%s: Failed to allocate %zu bytes\n", + __func__, sizeof(*res)); res->name = "System RAM (boot alias)"; res->start = boot_alias_start; res->end = phys_to_idmap(end); @@ -875,6 +875,9 @@ static void __init request_standard_resources(const struct machine_desc *mdesc) } res = memblock_alloc(sizeof(*res), SMP_CACHE_BYTES); + if (!res) + panic("%s: Failed to allocate %zu bytes\n", __func__, + sizeof(*res)); res->name = "System RAM"; res->start = start; res->end = end; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 76bb8de6bf6b..3ca71d679aec 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/signal.c * * Copyright (C) 1995-2009 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/errno.h> #include <linux/random.h> @@ -549,8 +546,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) int ret; /* - * Increment event counter and perform fixup for the pre-signal - * frame. + * Perform fixup for the pre-signal frame. */ rseq_signal_deliver(ksig, regs); diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S index 2c7b22e32152..7540ec51d16c 100644 --- a/arch/arm/kernel/sigreturn_codes.S +++ b/arch/arm/kernel/sigreturn_codes.S @@ -1,17 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * sigreturn_codes.S - code sinpets for sigreturn syscalls * * Created by: Victor Kamensky, 2013-08-13 * Copyright: (C) 2013 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <asm/assembler.h> diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index a8257fc9cf2a..5dc8b80bb693 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -120,6 +120,14 @@ ENDPROC(cpu_resume_after_mmu) .text .align +#ifdef CONFIG_MCPM + .arm +THUMB( .thumb ) +ENTRY(cpu_resume_no_hyp) +ARM_BE8(setend be) @ ensure we are in BE mode + b no_hyp +#endif + #ifdef CONFIG_MMU .arm ENTRY(cpu_resume_arm) @@ -135,6 +143,7 @@ ARM_BE8(setend be) @ ensure we are in BE mode bl __hyp_stub_install_secondary #endif safe_svcmode_maskall r1 +no_hyp: mov r1, #0 ALT_SMP(mrc p15, 0, r0, c0, c0, 5) ALT_UP_B(1f) @@ -164,6 +173,9 @@ ENDPROC(cpu_resume) #ifdef CONFIG_MMU ENDPROC(cpu_resume_arm) #endif +#ifdef CONFIG_MCPM +ENDPROC(cpu_resume_no_hyp) +#endif .align 2 _sleep_save_sp: diff --git a/arch/arm/kernel/smccc-call.S b/arch/arm/kernel/smccc-call.S index e5d43066b889..00664c78faca 100644 --- a/arch/arm/kernel/smccc-call.S +++ b/arch/arm/kernel/smccc-call.S @@ -1,15 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2015, Linaro Limited - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #include <linux/linkage.h> diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 1d6f5ea522f4..a137608cd197 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/smp.c * * Copyright (C) 2002 ARM Limited, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> #include <linux/delay.h> @@ -62,12 +59,6 @@ */ struct secondary_data secondary_data; -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ -volatile int pen_release = -1; - enum ipi_msg_type { IPI_WAKEUP, IPI_TIMER, @@ -76,6 +67,10 @@ enum ipi_msg_type { IPI_CPU_STOP, IPI_IRQ_WORK, IPI_COMPLETION, + /* + * CPU_BACKTRACE is special and not included in NR_IPI + * or tracable with trace_ipi_* + */ IPI_CPU_BACKTRACE, /* * SGI8-15 can be reserved by secure firmware, and thus may @@ -604,8 +599,10 @@ static void ipi_cpu_stop(unsigned int cpu) local_fiq_disable(); local_irq_disable(); - while (1) + while (1) { cpu_relax(); + wfe(); + } } static DEFINE_PER_CPU(struct completion *, cpu_completion); @@ -758,15 +755,20 @@ static int cpufreq_callback(struct notifier_block *nb, unsigned long val, void *data) { struct cpufreq_freqs *freq = data; - int cpu = freq->cpu; + struct cpumask *cpus = freq->policy->cpus; + int cpu, first = cpumask_first(cpus); + unsigned int lpj; if (freq->flags & CPUFREQ_CONST_LOOPS) return NOTIFY_OK; - if (!per_cpu(l_p_j_ref, cpu)) { - per_cpu(l_p_j_ref, cpu) = - per_cpu(cpu_data, cpu).loops_per_jiffy; - per_cpu(l_p_j_ref_freq, cpu) = freq->old; + if (!per_cpu(l_p_j_ref, first)) { + for_each_cpu(cpu, cpus) { + per_cpu(l_p_j_ref, cpu) = + per_cpu(cpu_data, cpu).loops_per_jiffy; + per_cpu(l_p_j_ref_freq, cpu) = freq->old; + } + if (!global_l_p_j_ref) { global_l_p_j_ref = loops_per_jiffy; global_l_p_j_ref_freq = freq->old; @@ -778,10 +780,11 @@ static int cpufreq_callback(struct notifier_block *nb, loops_per_jiffy = cpufreq_scale(global_l_p_j_ref, global_l_p_j_ref_freq, freq->new); - per_cpu(cpu_data, cpu).loops_per_jiffy = - cpufreq_scale(per_cpu(l_p_j_ref, cpu), - per_cpu(l_p_j_ref_freq, cpu), - freq->new); + + lpj = cpufreq_scale(per_cpu(l_p_j_ref, first), + per_cpu(l_p_j_ref_freq, first), freq->new); + for_each_cpu(cpu, cpus) + per_cpu(cpu_data, cpu).loops_per_jiffy = lpj; } return NOTIFY_OK; } @@ -801,7 +804,7 @@ core_initcall(register_cpufreq_notifier); static void raise_nmi(cpumask_t *mask) { - smp_cross_call(mask, IPI_CPU_BACKTRACE); + __smp_cross_call(mask, IPI_CPU_BACKTRACE); } void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self) diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index c6b33074c393..6de47fb3b828 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/smp_scu.c * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/io.h> diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index 9af0701f7094..d4908b3736d8 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/smp_tlb.c * * Copyright (C) 2002 ARM Limited, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/preempt.h> #include <linux/smp.h> diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index b30eafeef096..9a14f721a2b0 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/smp_twd.c * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/kernel.h> @@ -100,8 +97,6 @@ static void twd_timer_stop(void) disable_percpu_irq(clk->irq); } -#ifdef CONFIG_COMMON_CLK - /* * Updates clockevent frequency when the cpu frequency changes. * Called on the cpu that is changing frequency with interrupts disabled. @@ -143,54 +138,6 @@ static int twd_clk_init(void) } core_initcall(twd_clk_init); -#elif defined (CONFIG_CPU_FREQ) - -#include <linux/cpufreq.h> - -/* - * Updates clockevent frequency when the cpu frequency changes. - * Called on the cpu that is changing frequency with interrupts disabled. - */ -static void twd_update_frequency(void *data) -{ - twd_timer_rate = clk_get_rate(twd_clk); - - clockevents_update_freq(raw_cpu_ptr(twd_evt), twd_timer_rate); -} - -static int twd_cpufreq_transition(struct notifier_block *nb, - unsigned long state, void *data) -{ - struct cpufreq_freqs *freqs = data; - - /* - * The twd clock events must be reprogrammed to account for the new - * frequency. The timer is local to a cpu, so cross-call to the - * changing cpu. - */ - if (state == CPUFREQ_POSTCHANGE) - smp_call_function_single(freqs->cpu, twd_update_frequency, - NULL, 1); - - return NOTIFY_OK; -} - -static struct notifier_block twd_cpufreq_nb = { - .notifier_call = twd_cpufreq_transition, -}; - -static int twd_cpufreq_init(void) -{ - if (twd_evt && raw_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) - return cpufreq_register_notifier(&twd_cpufreq_nb, - CPUFREQ_TRANSITION_NOTIFIER); - - return 0; -} -core_initcall(twd_cpufreq_init); - -#endif - static void twd_calibrate_rate(void) { unsigned long count; @@ -366,21 +313,6 @@ out_free: return err; } -int __init twd_local_timer_register(struct twd_local_timer *tlt) -{ - if (twd_base || twd_evt) - return -EBUSY; - - twd_ppi = tlt->res[1].start; - - twd_base = ioremap(tlt->res[0].start, resource_size(&tlt->res[0])); - if (!twd_base) - return -ENOMEM; - - return twd_local_timer_common_register(NULL); -} - -#ifdef CONFIG_OF static int __init twd_local_timer_of_register(struct device_node *np) { int err; @@ -406,4 +338,3 @@ out: TIMER_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register); TIMER_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register); TIMER_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register); -#endif diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index a56e7c856ab5..71778bb0475b 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only #include <linux/export.h> #include <linux/sched.h> #include <linux/sched/debug.h> @@ -115,8 +116,6 @@ static noinline void __save_stack_trace(struct task_struct *tsk, * running on another CPU? For now, ignore it as we * can't guarantee we won't explode. */ - if (trace->nr_entries < trace->max_entries) - trace->entries[trace->nr_entries++] = ULONG_MAX; return; #else frame.fp = thread_saved_fp(tsk); @@ -134,8 +133,6 @@ static noinline void __save_stack_trace(struct task_struct *tsk, } walk_stackframe(&frame, save_trace, &data); - if (trace->nr_entries < trace->max_entries) - trace->entries[trace->nr_entries++] = ULONG_MAX; } void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace) @@ -153,8 +150,6 @@ void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace) frame.pc = regs->ARM_pc; walk_stackframe(&frame, save_trace, &data); - if (trace->nr_entries < trace->max_entries) - trace->entries[trace->nr_entries++] = ULONG_MAX; } void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 76f6e6a9736c..e640871328c1 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/swp_emulate.c * * Copyright (C) 2009 ARM Limited * __user_* functions adapted from include/asm/uaccess.h * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Implements emulation of the SWP/SWPB instructions using load-exclusive and * store-exclusive for processors that have them disabled (or future ones that * might not implement them). diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index bdf7514204ab..a5f183cfecb1 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/sys_arm.c * * Copyright (C) People who wrote linux/arch/i386/kernel/sys_i386.c * Copyright (C) 1995, 1996 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file contains various random system calls that * have a non-standard calling sequence on the Linux/arm * platform. diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 92ab36f38795..17bd32b22371 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/kernel/sys_oabi-compat.c * @@ -7,10 +8,6 @@ * Author: Nicolas Pitre * Created: Oct 7, 2005 * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* @@ -317,10 +314,10 @@ struct oabi_sembuf { asmlinkage long sys_oabi_semtimedop(int semid, struct oabi_sembuf __user *tsops, unsigned nsops, - const struct timespec __user *timeout) + const struct old_timespec32 __user *timeout) { struct sembuf *sops; - struct timespec local_timeout; + struct old_timespec32 local_timeout; long err; int i; @@ -350,7 +347,7 @@ asmlinkage long sys_oabi_semtimedop(int semid, } else { mm_segment_t fs = get_fs(); set_fs(KERNEL_DS); - err = sys_semtimedop(semid, sops, nsops, timeout); + err = sys_semtimedop_time32(semid, sops, nsops, timeout); set_fs(fs); } kfree(sops); @@ -375,7 +372,7 @@ asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third, return sys_oabi_semtimedop(first, (struct oabi_sembuf __user *)ptr, second, - (const struct timespec __user *)fifth); + (const struct old_timespec32 __user *)fifth); default: return sys_ipc(call, first, second, third, ptr, fifth); } diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index b10e1360762e..9d9b1db73932 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -1,6 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2008-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 * TCM memory handling for ARM systems * * Author: Linus Walleij <linus.walleij@stericsson.com> diff --git a/arch/arm/kernel/thumbee.c b/arch/arm/kernel/thumbee.c index 8ff8dbfbe9fb..d832eb9e6235 100644 --- a/arch/arm/kernel/thumbee.c +++ b/arch/arm/kernel/thumbee.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/kernel/thumbee.c * * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 078b259ead4e..b996b2cf0703 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/time.c * * Copyright (C) 1991, 1992, 1995 Linus Torvalds * Modifications for ARM (C) 1994-2001 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file contains the ARM-specific time handling details: * reading the RTC at bootup, etc... */ diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 33af097c454b..7e2f1cba84e5 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/traps.c * * Copyright (C) 1995-2009 Russell King * Fragments that appear the same as linux/arch/i386/kernel/traps.c (C) Linus Torvalds * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * 'traps.c' handles hardware exceptions after we have saved some state in * 'linux/arch/arm/lib/traps.S'. Mostly a debugging aid, but will probably * kill the offending process. diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 0bee233fef9a..4574e6aea0a5 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -1,22 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/kernel/unwind.c * * Copyright (C) 2008 ARM Limited * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * * Stack unwinding support for ARM * * An ARM EABI version of gcc is required to generate the unwind @@ -93,7 +80,7 @@ extern const struct unwind_idx __start_unwind_idx[]; static const struct unwind_idx *__origin_unwind_idx; extern const struct unwind_idx __stop_unwind_idx[]; -static DEFINE_SPINLOCK(unwind_lock); +static DEFINE_RAW_SPINLOCK(unwind_lock); static LIST_HEAD(unwind_tables); /* Convert a prel31 symbol to an absolute address */ @@ -201,7 +188,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr) /* module unwind tables */ struct unwind_table *table; - spin_lock_irqsave(&unwind_lock, flags); + raw_spin_lock_irqsave(&unwind_lock, flags); list_for_each_entry(table, &unwind_tables, list) { if (addr >= table->begin_addr && addr < table->end_addr) { @@ -213,7 +200,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr) break; } } - spin_unlock_irqrestore(&unwind_lock, flags); + raw_spin_unlock_irqrestore(&unwind_lock, flags); } pr_debug("%s: idx = %p\n", __func__, idx); @@ -529,9 +516,9 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, tab->begin_addr = text_addr; tab->end_addr = text_addr + text_size; - spin_lock_irqsave(&unwind_lock, flags); + raw_spin_lock_irqsave(&unwind_lock, flags); list_add_tail(&tab->list, &unwind_tables); - spin_unlock_irqrestore(&unwind_lock, flags); + raw_spin_unlock_irqrestore(&unwind_lock, flags); return tab; } @@ -543,9 +530,9 @@ void unwind_table_del(struct unwind_table *tab) if (!tab) return; - spin_lock_irqsave(&unwind_lock, flags); + raw_spin_lock_irqsave(&unwind_lock, flags); list_del(&tab->list); - spin_unlock_irqrestore(&unwind_lock, flags); + raw_spin_unlock_irqrestore(&unwind_lock, flags); kfree(tab); } diff --git a/arch/arm/kernel/v7m.c b/arch/arm/kernel/v7m.c index 4d2cba94f5cc..094c5c59fc72 100644 --- a/arch/arm/kernel/v7m.c +++ b/arch/arm/kernel/v7m.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 Uwe Kleine-Koenig for Pengutronix - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include <linux/io.h> #include <linux/reboot.h> diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index f4dd7f9663c1..8872acf9ff99 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Adapted from arm64 version. * * Copyright (C) 2012 ARM Limited * Copyright (C) 2015 Mentor Graphics Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/cache.h> diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c index 77a2eef72115..ed4f6e77616d 100644 --- a/arch/arm/kernel/xscale-cp0.c +++ b/arch/arm/kernel/xscale-cp0.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/xscale-cp0.c * * XScale DSP and iWMMXt coprocessor context switching and handling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/types.h> diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 3f5320f46de2..f591026347a5 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -22,7 +22,6 @@ config KVM bool "Kernel-based Virtual Machine (KVM) support" depends on MMU && OF select PREEMPT_NOTIFIERS - select ANON_INODES select ARM_GIC select ARM_GIC_V3 select ARM_GIC_V3_ITS diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index 48de846f2246..531e59f5be9c 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -8,9 +8,8 @@ ifeq ($(plus_virt),+virt) plus_virt_def := -DREQUIRES_VIRT=1 endif -ccflags-y += -Iarch/arm/kvm -Ivirt/kvm/arm/vgic -CFLAGS_arm.o := -I. $(plus_virt_def) -CFLAGS_mmu.o := -I. +ccflags-y += -I $(srctree)/$(src) -I $(srctree)/virt/kvm/arm/vgic +CFLAGS_arm.o := $(plus_virt_def) AFLAGS_init.o := -Wa,-march=armv7-a$(plus_virt) AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt) diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index e8bd288fd5be..d2806bcff8bb 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Authors: Rusty Russell <rusty@rustcorp.com.au> * Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/bsearch.h> @@ -293,15 +281,16 @@ static bool access_cntp_tval(struct kvm_vcpu *vcpu, const struct coproc_params *p, const struct coproc_reg *r) { - u64 now = kvm_phys_timer_read(); - u64 val; + u32 val; if (p->is_write) { val = *vcpu_reg(vcpu, p->Rt1); - kvm_arm_timer_set_reg(vcpu, KVM_REG_ARM_PTIMER_CVAL, val + now); + kvm_arm_timer_write_sysreg(vcpu, + TIMER_PTIMER, TIMER_REG_TVAL, val); } else { - val = kvm_arm_timer_get_reg(vcpu, KVM_REG_ARM_PTIMER_CVAL); - *vcpu_reg(vcpu, p->Rt1) = val - now; + val = kvm_arm_timer_read_sysreg(vcpu, + TIMER_PTIMER, TIMER_REG_TVAL); + *vcpu_reg(vcpu, p->Rt1) = val; } return true; @@ -315,9 +304,11 @@ static bool access_cntp_ctl(struct kvm_vcpu *vcpu, if (p->is_write) { val = *vcpu_reg(vcpu, p->Rt1); - kvm_arm_timer_set_reg(vcpu, KVM_REG_ARM_PTIMER_CTL, val); + kvm_arm_timer_write_sysreg(vcpu, + TIMER_PTIMER, TIMER_REG_CTL, val); } else { - val = kvm_arm_timer_get_reg(vcpu, KVM_REG_ARM_PTIMER_CTL); + val = kvm_arm_timer_read_sysreg(vcpu, + TIMER_PTIMER, TIMER_REG_CTL); *vcpu_reg(vcpu, p->Rt1) = val; } @@ -333,9 +324,11 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu, if (p->is_write) { val = (u64)*vcpu_reg(vcpu, p->Rt2) << 32; val |= *vcpu_reg(vcpu, p->Rt1); - kvm_arm_timer_set_reg(vcpu, KVM_REG_ARM_PTIMER_CVAL, val); + kvm_arm_timer_write_sysreg(vcpu, + TIMER_PTIMER, TIMER_REG_CVAL, val); } else { - val = kvm_arm_timer_get_reg(vcpu, KVM_REG_ARM_PTIMER_CVAL); + val = kvm_arm_timer_read_sysreg(vcpu, + TIMER_PTIMER, TIMER_REG_CVAL); *vcpu_reg(vcpu, p->Rt1) = val; *vcpu_reg(vcpu, p->Rt2) = val >> 32; } diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h index 3a41b7d1eb86..637065b13012 100644 --- a/arch/arm/kvm/coproc.h +++ b/arch/arm/kvm/coproc.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Authors: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef __ARM_KVM_COPROC_LOCAL_H__ diff --git a/arch/arm/kvm/coproc_a15.c b/arch/arm/kvm/coproc_a15.c index a7136757d373..36bf15421ae8 100644 --- a/arch/arm/kvm/coproc_a15.c +++ b/arch/arm/kvm/coproc_a15.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Authors: Rusty Russell <rusty@rustcorp.au> * Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/kvm_host.h> #include <asm/kvm_coproc.h> diff --git a/arch/arm/kvm/coproc_a7.c b/arch/arm/kvm/coproc_a7.c index b19e46d1b2c0..40f643e1e05c 100644 --- a/arch/arm/kvm/coproc_a7.c +++ b/arch/arm/kvm/coproc_a7.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Copyright (C) 2013 - ARM Ltd @@ -5,19 +6,6 @@ * Authors: Rusty Russell <rusty@rustcorp.au> * Christoffer Dall <c.dall@virtualopensystems.com> * Jonathan Austin <jonathan.austin@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/kvm_host.h> #include <asm/kvm_coproc.h> diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c index 9046b53d87c1..29bb852140c5 100644 --- a/arch/arm/kvm/emulate.c +++ b/arch/arm/kvm/emulate.c @@ -1,19 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/mm.h> diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index 2b8de885b2bf..684cf64b4033 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -1,19 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/errno.h> diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index 910bd8dabb3c..2a6a1394d26e 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -1,19 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/kvm.h> diff --git a/arch/arm/kvm/hyp/Makefile b/arch/arm/kvm/hyp/Makefile index d2b5ec9c4b92..ba88b1eca93c 100644 --- a/arch/arm/kvm/hyp/Makefile +++ b/arch/arm/kvm/hyp/Makefile @@ -11,6 +11,7 @@ CFLAGS_ARMV7VE :=$(call cc-option, -march=armv7ve) obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v3-sr.o obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o +obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/aarch32.o obj-$(CONFIG_KVM_ARM_HOST) += tlb.o obj-$(CONFIG_KVM_ARM_HOST) += cp15-sr.o diff --git a/arch/arm/kvm/hyp/banked-sr.c b/arch/arm/kvm/hyp/banked-sr.c index be4b8b0a40ad..c4632ed9e819 100644 --- a/arch/arm/kvm/hyp/banked-sr.c +++ b/arch/arm/kvm/hyp/banked-sr.c @@ -1,21 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Original code: * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> * * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <asm/kvm_hyp.h> diff --git a/arch/arm/kvm/hyp/cp15-sr.c b/arch/arm/kvm/hyp/cp15-sr.c index c4782812714c..e6923306f698 100644 --- a/arch/arm/kvm/hyp/cp15-sr.c +++ b/arch/arm/kvm/hyp/cp15-sr.c @@ -1,21 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Original code: * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> * * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <asm/kvm_hyp.h> @@ -27,7 +16,6 @@ static u64 *cp15_64(struct kvm_cpu_context *ctxt, int idx) void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt) { - ctxt->cp15[c0_MPIDR] = read_sysreg(VMPIDR); ctxt->cp15[c0_CSSELR] = read_sysreg(CSSELR); ctxt->cp15[c1_SCTLR] = read_sysreg(SCTLR); ctxt->cp15[c1_CPACR] = read_sysreg(CPACR); diff --git a/arch/arm/kvm/hyp/entry.S b/arch/arm/kvm/hyp/entry.S index 60783f3b57cc..4bd1f6a74180 100644 --- a/arch/arm/kvm/hyp/entry.S +++ b/arch/arm/kvm/hyp/entry.S @@ -1,18 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2016 - ARM Ltd * Author: Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/linkage.h> diff --git a/arch/arm/kvm/hyp/hyp-entry.S b/arch/arm/kvm/hyp/hyp-entry.S index aa3f9a9837ac..fe3d7811a908 100644 --- a/arch/arm/kvm/hyp/hyp-entry.S +++ b/arch/arm/kvm/hyp/hyp-entry.S @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/arm-smccc.h> @@ -176,7 +164,7 @@ THUMB( orr lr, lr, #PSR_T_BIT ) msr spsr_cxsf, lr ldr lr, =panic msr ELR_hyp, lr - ldr lr, =kvm_call_hyp + ldr lr, =__kvm_call_hyp clrex eret ENDPROC(__hyp_do_panic) diff --git a/arch/arm/kvm/hyp/s2-setup.c b/arch/arm/kvm/hyp/s2-setup.c index 7be39af2ed6c..5dfbea5adf65 100644 --- a/arch/arm/kvm/hyp/s2-setup.c +++ b/arch/arm/kvm/hyp/s2-setup.c @@ -1,18 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 - ARM Ltd * Author: Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/types.h> diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c index acf1c37fa49c..1efeef3fd0ee 100644 --- a/arch/arm/kvm/hyp/switch.c +++ b/arch/arm/kvm/hyp/switch.c @@ -1,18 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 - ARM Ltd * Author: Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/jump_label.h> @@ -77,7 +66,7 @@ static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu) static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu) { struct kvm *kvm = kern_hyp_va(vcpu->kvm); - write_sysreg(kvm->arch.vttbr, VTTBR); + write_sysreg(kvm_get_vttbr(kvm), VTTBR); write_sysreg(vcpu->arch.midr, VPIDR); } diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c index c0edd450e104..848f27bbad9d 100644 --- a/arch/arm/kvm/hyp/tlb.c +++ b/arch/arm/kvm/hyp/tlb.c @@ -1,21 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Original code: * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> * * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <asm/kvm_hyp.h> @@ -41,7 +30,7 @@ void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm) /* Switch to requested VMID */ kvm = kern_hyp_va(kvm); - write_sysreg(kvm->arch.vttbr, VTTBR); + write_sysreg(kvm_get_vttbr(kvm), VTTBR); isb(); write_sysreg(0, TLBIALLIS); @@ -61,7 +50,7 @@ void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm); /* Switch to requested VMID */ - write_sysreg(kvm->arch.vttbr, VTTBR); + write_sysreg(kvm_get_vttbr(kvm), VTTBR); isb(); write_sysreg(0, TLBIALL); diff --git a/arch/arm/kvm/hyp/vfp.S b/arch/arm/kvm/hyp/vfp.S index 7c297e87eb8b..675a52348d8d 100644 --- a/arch/arm/kvm/hyp/vfp.S +++ b/arch/arm/kvm/hyp/vfp.S @@ -1,18 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/linkage.h> diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 5386528665b5..33e34b6d24b2 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/linkage.h> diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 80a1d6cd261c..064f4f118ca7 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/linkage.h> @@ -42,7 +30,7 @@ * r12: caller save * rest: callee save */ -ENTRY(kvm_call_hyp) +ENTRY(__kvm_call_hyp) hvc #0 bx lr -ENDPROC(kvm_call_hyp) +ENDPROC(__kvm_call_hyp) diff --git a/arch/arm/kvm/irq.h b/arch/arm/kvm/irq.h index b74099b905fd..0d257de42c10 100644 --- a/arch/arm/kvm/irq.h +++ b/arch/arm/kvm/irq.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * irq.h: in kernel interrupt controller related definitions * Copyright (c) 2016 Red Hat, Inc. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * * This header is included by irqchip.c. However, on ARM, interrupt * controller declarations are located in include/kvm/arm_vgic.h since * they are mostly shared between arm and arm64. diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index e53327912adc..eb4174f6ebbd 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -1,19 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 - Virtual Open Systems and Columbia University * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/compiler.h> #include <linux/errno.h> diff --git a/arch/arm/kvm/vgic-v3-coproc.c b/arch/arm/kvm/vgic-v3-coproc.c index f41abf76366f..ed3b2e4759ce 100644 --- a/arch/arm/kvm/vgic-v3-coproc.c +++ b/arch/arm/kvm/vgic-v3-coproc.c @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * VGIC system registers handling functions for AArch32 mode - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kvm.h> diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index ad25fd1872c7..0bff0176db2c 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -39,7 +39,7 @@ $(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S $(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S ifeq ($(CONFIG_KERNEL_MODE_NEON),y) - NEON_FLAGS := -mfloat-abi=softfp -mfpu=neon + NEON_FLAGS := -march=armv7-a -mfloat-abi=softfp -mfpu=neon CFLAGS_xor-neon.o += $(NEON_FLAGS) obj-$(CONFIG_XOR_BLOCKS) += xor-neon.o endif diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index 7d7952e5a3b1..1d5210eb4776 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/backtrace.S * * Copyright (C) 1995, 1996 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * 27/03/03 Ian Molton Clean up CONFIG_CPU - * */ #include <linux/kern_levels.h> #include <linux/linkage.h> diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 93cddab73072..95bd35991288 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -7,7 +7,7 @@ ENTRY( \name ) UNWIND( .fnstart ) ands ip, r1, #3 - strneb r1, [ip] @ assert word-aligned + strbne r1, [ip] @ assert word-aligned mov r2, #1 and r3, r0, #31 @ Get bit offset mov r0, r0, lsr #5 @@ -32,7 +32,7 @@ ENDPROC(\name ) ENTRY( \name ) UNWIND( .fnstart ) ands ip, r1, #3 - strneb r1, [ip] @ assert word-aligned + strbne r1, [ip] @ assert word-aligned mov r2, #1 and r3, r0, #31 @ Get bit offset mov r0, r0, lsr #5 @@ -62,7 +62,7 @@ ENDPROC(\name ) ENTRY( \name ) UNWIND( .fnstart ) ands ip, r1, #3 - strneb r1, [ip] @ assert word-aligned + strbne r1, [ip] @ assert word-aligned and r2, r0, #31 mov r0, r0, lsr #5 mov r3, #1 @@ -89,7 +89,7 @@ ENDPROC(\name ) ENTRY( \name ) UNWIND( .fnstart ) ands ip, r1, #3 - strneb r1, [ip] @ assert word-aligned + strbne r1, [ip] @ assert word-aligned and r3, r0, #31 mov r0, r0, lsr #5 save_and_disable_irqs ip diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S index bf3a40889205..28b0341ae786 100644 --- a/arch/arm/lib/call_with_stack.S +++ b/arch/arm/lib/call_with_stack.S @@ -1,21 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/lib/call_with_stack.S * * Copyright (C) 2011 ARM Ltd. * Written by Will Deacon <will.deacon@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/linkage.h> diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S index f4027862172f..02424765e9e1 100644 --- a/arch/arm/lib/changebit.S +++ b/arch/arm/lib/changebit.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/changebit.S * * Copyright (C) 1995-1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index e936352ccb00..8f2c4dbfc5f2 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/clear_user.S * * Copyright (C) 1995, 1996,1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -44,7 +41,7 @@ UNWIND(.save {r1, lr}) strusr r2, r0, 1, ne, rept=2 tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1 it ne @ explicit IT needed for the label -USER( strnebt r2, [r0]) +USER( strbtne r2, [r0]) mov r0, #0 ldmfd sp!, {r1, pc} UNWIND(.fnend) diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S index f6b75fb64d30..4646dee8a339 100644 --- a/arch/arm/lib/clearbit.S +++ b/arch/arm/lib/clearbit.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/clearbit.S * * Copyright (C) 1995-1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S index 0d4c189c7f4f..95b2e1ce559c 100644 --- a/arch/arm/lib/copy_from_user.S +++ b/arch/arm/lib/copy_from_user.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/copy_from_user.S * * Author: Nicolas Pitre * Created: Sep 29, 2005 * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> @@ -91,7 +88,7 @@ .endm .macro str1b ptr reg cond=al abort - str\cond\()b \reg, [\ptr], #1 + strb\cond \reg, [\ptr], #1 .endm .macro enter reg1 reg2 diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S index 6ee2f6706f86..5db1a8ee3d9f 100644 --- a/arch/arm/lib/copy_page.S +++ b/arch/arm/lib/copy_page.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/copypage.S * * Copyright (C) 1995-1999 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ASM optimised string functions */ #include <linux/linkage.h> @@ -39,9 +36,9 @@ ENTRY(copy_page) .endr subs r2, r2, #1 @ 1 stmia r0!, {r3, r4, ip, lr} @ 4 - ldmgtia r1!, {r3, r4, ip, lr} @ 4 + ldmiagt r1!, {r3, r4, ip, lr} @ 4 bgt 1b @ 1 - PLD( ldmeqia r1!, {r3, r4, ip, lr} ) + PLD( ldmiaeq r1!, {r3, r4, ip, lr} ) PLD( beq 2b ) ldmfd sp!, {r4, pc} @ 3 ENDPROC(copy_page) diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S index 652e4d98cd47..810a805d36dc 100644 --- a/arch/arm/lib/copy_template.S +++ b/arch/arm/lib/copy_template.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/copy_template.s * @@ -6,10 +7,6 @@ * Author: Nicolas Pitre * Created: Sep 28, 2005 * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* @@ -99,7 +96,7 @@ CALGN( ands ip, r0, #31 ) CALGN( rsb r3, ip, #32 ) - CALGN( sbcnes r4, r3, r2 ) @ C is always set here + CALGN( sbcsne r4, r3, r2 ) @ C is always set here CALGN( bcs 2f ) CALGN( adr r4, 6f ) CALGN( subs r2, r2, r3 ) @ C gets set @@ -204,7 +201,7 @@ CALGN( ands ip, r0, #31 ) CALGN( rsb ip, ip, #32 ) - CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( sbcsne r4, ip, r2 ) @ C is always set here CALGN( subcc r2, r2, ip ) CALGN( bcc 15f ) @@ -241,7 +238,7 @@ orr r9, r9, ip, lspush #\push mov ip, ip, lspull #\pull orr ip, ip, lr, lspush #\push - str8w r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f + str8w r0, r3, r4, r5, r6, r7, r8, r9, ip, abort=19f bge 12b PLD( cmn r2, #96 ) PLD( bge 13b ) diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S index 97a6ff4b7e3c..ebfe4cb3d912 100644 --- a/arch/arm/lib/copy_to_user.S +++ b/arch/arm/lib/copy_to_user.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/copy_to_user.S * * Author: Nicolas Pitre * Created: Sep 29, 2005 * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> @@ -49,7 +46,7 @@ .endm .macro ldr1b ptr reg cond=al abort - ldr\cond\()b \reg, [\ptr], #1 + ldrb\cond \reg, [\ptr], #1 .endm #ifdef CONFIG_CPU_USE_DOMAINS diff --git a/arch/arm/lib/csumipv6.S b/arch/arm/lib/csumipv6.S index 3ac6ef01bc43..3559d515144c 100644 --- a/arch/arm/lib/csumipv6.S +++ b/arch/arm/lib/csumipv6.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/csumipv6.S * * Copyright (C) 1995-1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S index 984e0f29d548..87c9471be8b6 100644 --- a/arch/arm/lib/csumpartial.S +++ b/arch/arm/lib/csumpartial.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/csumpartial.S * * Copyright (C) 1995-1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -40,9 +37,9 @@ td3 .req lr /* we must have at least one byte. */ tst buf, #1 @ odd address? movne sum, sum, ror #8 - ldrneb td0, [buf], #1 + ldrbne td0, [buf], #1 subne len, len, #1 - adcnes sum, sum, td0, put_byte_1 + adcsne sum, sum, td0, put_byte_1 .Lless4: tst len, #6 beq .Lless8_byte @@ -68,8 +65,8 @@ td3 .req lr bne .Lless8_wordlp .Lless8_byte: tst len, #1 @ odd number of bytes - ldrneb td0, [buf], #1 @ include last byte - adcnes sum, sum, td0, put_byte_0 @ update checksum + ldrbne td0, [buf], #1 @ include last byte + adcsne sum, sum, td0, put_byte_0 @ update checksum .Ldone: adc r0, sum, #0 @ collect up the last carry ldr td0, [sp], #4 @@ -78,17 +75,17 @@ td3 .req lr ldr pc, [sp], #4 @ return .Lnot_aligned: tst buf, #1 @ odd address - ldrneb td0, [buf], #1 @ make even + ldrbne td0, [buf], #1 @ make even subne len, len, #1 - adcnes sum, sum, td0, put_byte_1 @ update checksum + adcsne sum, sum, td0, put_byte_1 @ update checksum tst buf, #2 @ 32-bit aligned? #if __LINUX_ARM_ARCH__ >= 4 - ldrneh td0, [buf], #2 @ make 32-bit aligned + ldrhne td0, [buf], #2 @ make 32-bit aligned subne len, len, #2 #else - ldrneb td0, [buf], #1 - ldrneb ip, [buf], #1 + ldrbne td0, [buf], #1 + ldrbne ip, [buf], #1 subne len, len, #2 #ifndef __ARMEB__ orrne td0, td0, ip, lsl #8 @@ -96,7 +93,7 @@ td3 .req lr orrne td0, ip, td0, lsl #8 #endif #endif - adcnes sum, sum, td0 @ update checksum + adcsne sum, sum, td0 @ update checksum ret lr ENTRY(csum_partial) diff --git a/arch/arm/lib/csumpartialcopy.S b/arch/arm/lib/csumpartialcopy.S index d03fc71fc88c..184d97254a7a 100644 --- a/arch/arm/lib/csumpartialcopy.S +++ b/arch/arm/lib/csumpartialcopy.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/csumpartialcopy.S * * Copyright (C) 1995-1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S index 10b45909610c..0b706a39a677 100644 --- a/arch/arm/lib/csumpartialcopygeneric.S +++ b/arch/arm/lib/csumpartialcopygeneric.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/csumpartialcopygeneric.S * * Copyright (C) 1995-2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <asm/assembler.h> @@ -148,9 +145,9 @@ FN_ENTRY strb r5, [dst], #1 mov r5, r4, get_byte_2 .Lexit: tst len, #1 - strneb r5, [dst], #1 + strbne r5, [dst], #1 andne r5, r5, #255 - adcnes sum, sum, r5, put_byte_0 + adcsne sum, sum, r5, put_byte_0 /* * If the dst pointer was not 16-bit aligned, we diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index b83fdc06286a..6bd3a93eaa3c 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/csumpartialcopyuser.S * * Copyright (C) 1995-1998 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * 27/03/03 Ian Molton Clean up CONFIG_CPU - * */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -95,7 +91,7 @@ add r2, r2, r1 mov r0, #0 @ zero the buffer 9002: teq r2, r1 - strneb r0, [r1], #1 + strbne r0, [r1], #1 bne 9002b load_regs .popsection diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S index c766694e929c..3ccade0f8130 100644 --- a/arch/arm/lib/delay-loop.S +++ b/arch/arm/lib/delay-loop.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/delay.S * * Copyright (C) 1995, 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 2cef11884857..b7fe84f68bf1 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -1,21 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Delay loops based on the OpenRISC implementation. * * Copyright (C) 2012 ARM Limited * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * Author: Will Deacon <will.deacon@arm.com> */ diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S index a9eafe4981eb..a87c02925ffa 100644 --- a/arch/arm/lib/div64.S +++ b/arch/arm/lib/div64.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/div64.S * @@ -6,10 +7,6 @@ * Author: Nicolas Pitre * Created: Oct 5, 2003 * Copyright: Monta Vista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> @@ -88,8 +85,8 @@ UNWIND(.fnstart) @ Break out early if dividend reaches 0. 2: cmp xh, yl orrcs yh, yh, ip - subcss xh, xh, yl - movnes ip, ip, lsr #1 + subscs xh, xh, yl + movsne ip, ip, lsr #1 mov yl, yl, lsr #1 bne 2b diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S index e6057fa851bb..eb8ac0412da6 100644 --- a/arch/arm/lib/ecard.S +++ b/arch/arm/lib/ecard.S @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/ecard.S * * Copyright (C) 1995, 1996 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * 27/03/03 Ian Molton Clean up CONFIG_CPU - * */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 7848780e8834..b5e8b9ae4c7d 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/findbit.S * * Copyright (C) 1995-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * 16th March 2001 - John Ripley <jripley@sonicblue.com> * Fixed so that "size" is an exclusive not an inclusive quantity. * All users of these functions expect exclusive sizes, and may diff --git a/arch/arm/lib/floppydma.S b/arch/arm/lib/floppydma.S index 617150b1baef..6698b83050dc 100644 --- a/arch/arm/lib/floppydma.S +++ b/arch/arm/lib/floppydma.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/floppydma.S * * Copyright (C) 1995, 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -14,8 +11,8 @@ .global floppy_fiqin_end ENTRY(floppy_fiqin_start) subs r9, r9, #1 - ldrgtb r12, [r11, #-4] - ldrleb r12, [r11], #0 + ldrbgt r12, [r11, #-4] + ldrble r12, [r11], #0 strb r12, [r10], #1 subs pc, lr, #4 floppy_fiqin_end: @@ -23,10 +20,10 @@ floppy_fiqin_end: .global floppy_fiqout_end ENTRY(floppy_fiqout_start) subs r9, r9, #1 - ldrgeb r12, [r10], #1 + ldrbge r12, [r10], #1 movlt r12, #0 - strleb r12, [r11], #0 - subles pc, lr, #4 + strble r12, [r11], #0 + subsle pc, lr, #4 strb r12, [r11, #-4] subs pc, lr, #4 floppy_fiqout_end: diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index b2e4bc3a635e..c5e420750c48 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/getuser.S * * Copyright (C) 2001 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Idea from x86 version, (C) Copyright 1998 Linus Torvalds * * These functions have a non-standard call interface to make them more diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/lib/io-acorn.S index 69719bad674d..b9082a2a2a01 100644 --- a/arch/arm/lib/io-acorn.S +++ b/arch/arm/lib/io-acorn.S @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/io-acorn.S * * Copyright (C) 1995, 1996 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * 27/03/03 Ian Molton Clean up CONFIG_CPU - * */ #include <linux/linkage.h> #include <linux/kern_levels.h> diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S index c31b2f3153f1..0def9388fb15 100644 --- a/arch/arm/lib/io-readsb.S +++ b/arch/arm/lib/io-readsb.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/io-readsb.S * * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -16,10 +13,10 @@ cmp ip, #2 ldrb r3, [r0] strb r3, [r1], #1 - ldrgeb r3, [r0] - strgeb r3, [r1], #1 - ldrgtb r3, [r0] - strgtb r3, [r1], #1 + ldrbge r3, [r0] + strbge r3, [r1], #1 + ldrbgt r3, [r0] + strbgt r3, [r1], #1 subs r2, r2, ip bne .Linsb_aligned @@ -72,7 +69,7 @@ ENTRY(__raw_readsb) bpl .Linsb_16_lp tst r2, #15 - ldmeqfd sp!, {r4 - r6, pc} + ldmfdeq sp!, {r4 - r6, pc} .Linsb_no_16: tst r2, #8 beq .Linsb_no_8 @@ -109,15 +106,15 @@ ENTRY(__raw_readsb) str r3, [r1], #4 .Linsb_no_4: ands r2, r2, #3 - ldmeqfd sp!, {r4 - r6, pc} + ldmfdeq sp!, {r4 - r6, pc} cmp r2, #2 ldrb r3, [r0] strb r3, [r1], #1 - ldrgeb r3, [r0] - strgeb r3, [r1], #1 - ldrgtb r3, [r0] - strgtb r3, [r1] + ldrbge r3, [r0] + strbge r3, [r1], #1 + ldrbgt r3, [r0] + strbgt r3, [r1] ldmfd sp!, {r4 - r6, pc} ENDPROC(__raw_readsb) diff --git a/arch/arm/lib/io-readsl.S b/arch/arm/lib/io-readsl.S index 2ed86fa5465f..d9f6b372b058 100644 --- a/arch/arm/lib/io-readsl.S +++ b/arch/arm/lib/io-readsl.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/io-readsl.S * * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -30,7 +27,7 @@ ENTRY(__raw_readsl) 2: movs r2, r2, lsl #31 ldrcs r3, [r0, #0] ldrcs ip, [r0, #0] - stmcsia r1!, {r3, ip} + stmiacs r1!, {r3, ip} ldrne r3, [r0, #0] strne r3, [r1, #0] ret lr diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index 413da9914529..266043610c0c 100644 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/io-readsw-armv3.S * * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -68,7 +65,7 @@ ENTRY(__raw_readsw) bpl .Linsw_8_lp tst r2, #7 - ldmeqfd sp!, {r4, r5, r6, pc} + ldmfdeq sp!, {r4, r5, r6, pc} .Lno_insw_8: tst r2, #4 beq .Lno_insw_4 @@ -97,9 +94,9 @@ ENTRY(__raw_readsw) .Lno_insw_2: tst r2, #1 ldrne r3, [r0] - strneb r3, [r1], #1 + strbne r3, [r1], #1 movne r3, r3, lsr #8 - strneb r3, [r1] + strbne r3, [r1] ldmfd sp!, {r4, r5, r6, pc} diff --git a/arch/arm/lib/io-readsw-armv4.S b/arch/arm/lib/io-readsw-armv4.S index d9a45e9692ae..228c176a94d1 100644 --- a/arch/arm/lib/io-readsw-armv4.S +++ b/arch/arm/lib/io-readsw-armv4.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/io-readsw-armv4.S * * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -76,8 +73,8 @@ ENTRY(__raw_readsw) pack r3, r3, ip str r3, [r1], #4 -.Lno_insw_2: ldrneh r3, [r0] - strneh r3, [r1] +.Lno_insw_2: ldrhne r3, [r0] + strhne r3, [r1] ldmfd sp!, {r4, r5, pc} @@ -94,7 +91,7 @@ ENTRY(__raw_readsw) #endif .Linsw_noalign: stmfd sp!, {r4, lr} - ldrccb ip, [r1, #-1]! + ldrbcc ip, [r1, #-1]! bcc 1f ldrh ip, [r0] @@ -121,11 +118,11 @@ ENTRY(__raw_readsw) 3: tst r2, #1 strb ip, [r1], #1 - ldrneh ip, [r0] + ldrhne ip, [r0] _BE_ONLY_( movne ip, ip, ror #8 ) - strneb ip, [r1], #1 + strbne ip, [r1], #1 _LE_ONLY_( movne ip, ip, lsr #8 ) _BE_ONLY_( movne ip, ip, lsr #24 ) - strneb ip, [r1] + strbne ip, [r1] ldmfd sp!, {r4, pc} ENDPROC(__raw_readsw) diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S index a46bbc9b168b..e2ae312f0b69 100644 --- a/arch/arm/lib/io-writesb.S +++ b/arch/arm/lib/io-writesb.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/io-writesb.S * * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -36,10 +33,10 @@ cmp ip, #2 ldrb r3, [r1], #1 strb r3, [r0] - ldrgeb r3, [r1], #1 - strgeb r3, [r0] - ldrgtb r3, [r1], #1 - strgtb r3, [r0] + ldrbge r3, [r1], #1 + strbge r3, [r0] + ldrbgt r3, [r1], #1 + strbgt r3, [r0] subs r2, r2, ip bne .Loutsb_aligned @@ -64,7 +61,7 @@ ENTRY(__raw_writesb) bpl .Loutsb_16_lp tst r2, #15 - ldmeqfd sp!, {r4, r5, pc} + ldmfdeq sp!, {r4, r5, pc} .Loutsb_no_16: tst r2, #8 beq .Loutsb_no_8 @@ -80,15 +77,15 @@ ENTRY(__raw_writesb) outword r3 .Loutsb_no_4: ands r2, r2, #3 - ldmeqfd sp!, {r4, r5, pc} + ldmfdeq sp!, {r4, r5, pc} cmp r2, #2 ldrb r3, [r1], #1 strb r3, [r0] - ldrgeb r3, [r1], #1 - strgeb r3, [r0] - ldrgtb r3, [r1] - strgtb r3, [r0] + ldrbge r3, [r1], #1 + strbge r3, [r0] + ldrbgt r3, [r1] + strbgt r3, [r0] ldmfd sp!, {r4, r5, pc} ENDPROC(__raw_writesb) diff --git a/arch/arm/lib/io-writesl.S b/arch/arm/lib/io-writesl.S index 4ea2435988c1..89ef7be61421 100644 --- a/arch/arm/lib/io-writesl.S +++ b/arch/arm/lib/io-writesl.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/io-writesl.S * * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -28,7 +25,7 @@ ENTRY(__raw_writesl) bpl 1b ldmfd sp!, {r4, lr} 2: movs r2, r2, lsl #31 - ldmcsia r1!, {r3, ip} + ldmiacs r1!, {r3, ip} strcs r3, [r0, #0] ldrne r3, [r1, #0] strcs ip, [r0, #0] diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index 121789eb6802..4cabbee7f3b8 100644 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/io-writesw-armv3.S * * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -79,7 +76,7 @@ ENTRY(__raw_writesw) bpl .Loutsw_8_lp tst r2, #7 - ldmeqfd sp!, {r4, r5, r6, pc} + ldmfdeq sp!, {r4, r5, r6, pc} .Lno_outsw_8: tst r2, #4 beq .Lno_outsw_4 diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S index 269f90c51ad2..12eec53266c7 100644 --- a/arch/arm/lib/io-writesw-armv4.S +++ b/arch/arm/lib/io-writesw-armv4.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/io-writesw-armv4.S * * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> @@ -61,8 +58,8 @@ ENTRY(__raw_writesw) ldr r3, [r1], #4 outword r3 -.Lno_outsw_2: ldrneh r3, [r1] - strneh r3, [r0] +.Lno_outsw_2: ldrhne r3, [r1] + strhne r3, [r0] ldmfd sp!, {r4, r5, pc} @@ -95,6 +92,6 @@ ENTRY(__raw_writesw) tst r2, #1 3: movne ip, r3, lsr #8 - strneh ip, [r0] + strhne ip, [r0] ret lr ENDPROC(__raw_writesw) diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index 9397b2e532af..c23f9d9e2970 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -96,7 +96,7 @@ Boston, MA 02111-1307, USA. */ subhs \dividend, \dividend, \divisor, lsr #3 orrhs \result, \result, \curbit, lsr #3 cmp \dividend, #0 @ Early termination? - movnes \curbit, \curbit, lsr #4 @ No, any more bits to do? + movsne \curbit, \curbit, lsr #4 @ No, any more bits to do? movne \divisor, \divisor, lsr #4 bne 1b @@ -182,7 +182,7 @@ Boston, MA 02111-1307, USA. */ subhs \dividend, \dividend, \divisor, lsr #3 cmp \dividend, #1 mov \divisor, \divisor, lsr #4 - subges \order, \order, #4 + subsge \order, \order, #4 bge 1b tst \order, #3 diff --git a/arch/arm/lib/memchr.S b/arch/arm/lib/memchr.S index 74a5bed6d999..95bedafd0330 100644 --- a/arch/arm/lib/memchr.S +++ b/arch/arm/lib/memchr.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/memchr.S * * Copyright (C) 1995-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ASM optimised string functions */ #include <linux/linkage.h> diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S index 64111bd4440b..09a333153dc6 100644 --- a/arch/arm/lib/memcpy.S +++ b/arch/arm/lib/memcpy.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/memcpy.S * * Author: Nicolas Pitre * Created: Sep 28, 2005 * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> @@ -30,7 +27,7 @@ .endm .macro ldr1b ptr reg cond=al abort - ldr\cond\()b \reg, [\ptr], #1 + ldrb\cond \reg, [\ptr], #1 .endm .macro str1w ptr reg abort @@ -42,7 +39,7 @@ .endm .macro str1b ptr reg cond=al abort - str\cond\()b \reg, [\ptr], #1 + strb\cond \reg, [\ptr], #1 .endm .macro enter reg1 reg2 diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S index 69a9d47fc5ab..b50e5770fb44 100644 --- a/arch/arm/lib/memmove.S +++ b/arch/arm/lib/memmove.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/memmove.S * * Author: Nicolas Pitre * Created: Sep 28, 2005 * Copyright: (C) MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> @@ -59,7 +56,7 @@ ENTRY(memmove) blt 5f CALGN( ands ip, r0, #31 ) - CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( sbcsne r4, ip, r2 ) @ C is always set here CALGN( bcs 2f ) CALGN( adr r4, 6f ) CALGN( subs r2, r2, ip ) @ C is set here @@ -114,20 +111,20 @@ ENTRY(memmove) UNWIND( .save {r0, r4, lr} ) @ still in first stmfd block 8: movs r2, r2, lsl #31 - ldrneb r3, [r1, #-1]! - ldrcsb r4, [r1, #-1]! - ldrcsb ip, [r1, #-1] - strneb r3, [r0, #-1]! - strcsb r4, [r0, #-1]! - strcsb ip, [r0, #-1] + ldrbne r3, [r1, #-1]! + ldrbcs r4, [r1, #-1]! + ldrbcs ip, [r1, #-1] + strbne r3, [r0, #-1]! + strbcs r4, [r0, #-1]! + strbcs ip, [r0, #-1] ldmfd sp!, {r0, r4, pc} 9: cmp ip, #2 - ldrgtb r3, [r1, #-1]! - ldrgeb r4, [r1, #-1]! + ldrbgt r3, [r1, #-1]! + ldrbge r4, [r1, #-1]! ldrb lr, [r1, #-1]! - strgtb r3, [r0, #-1]! - strgeb r4, [r0, #-1]! + strbgt r3, [r0, #-1]! + strbge r4, [r0, #-1]! subs r2, r2, ip strb lr, [r0, #-1]! blt 8b @@ -150,7 +147,7 @@ ENTRY(memmove) blt 14f CALGN( ands ip, r0, #31 ) - CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( sbcsne r4, ip, r2 ) @ C is always set here CALGN( subcc r2, r2, ip ) CALGN( bcc 15f ) diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index ed6d35d9cdb5..6ca4535c47fb 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/memset.S * * Copyright (C) 1995-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ASM optimised string functions */ #include <linux/linkage.h> @@ -44,20 +41,20 @@ UNWIND( .save {r8, lr} ) mov lr, r3 2: subs r2, r2, #64 - stmgeia ip!, {r1, r3, r8, lr} @ 64 bytes at a time. - stmgeia ip!, {r1, r3, r8, lr} - stmgeia ip!, {r1, r3, r8, lr} - stmgeia ip!, {r1, r3, r8, lr} + stmiage ip!, {r1, r3, r8, lr} @ 64 bytes at a time. + stmiage ip!, {r1, r3, r8, lr} + stmiage ip!, {r1, r3, r8, lr} + stmiage ip!, {r1, r3, r8, lr} bgt 2b - ldmeqfd sp!, {r8, pc} @ Now <64 bytes to go. + ldmfdeq sp!, {r8, pc} @ Now <64 bytes to go. /* * No need to correct the count; we're only testing bits from now on */ tst r2, #32 - stmneia ip!, {r1, r3, r8, lr} - stmneia ip!, {r1, r3, r8, lr} + stmiane ip!, {r1, r3, r8, lr} + stmiane ip!, {r1, r3, r8, lr} tst r2, #16 - stmneia ip!, {r1, r3, r8, lr} + stmiane ip!, {r1, r3, r8, lr} ldmfd sp!, {r8, lr} UNWIND( .fnend ) @@ -87,22 +84,22 @@ UNWIND( .save {r4-r8, lr} ) rsb r8, r8, #32 sub r2, r2, r8 movs r8, r8, lsl #(32 - 4) - stmcsia ip!, {r4, r5, r6, r7} - stmmiia ip!, {r4, r5} + stmiacs ip!, {r4, r5, r6, r7} + stmiami ip!, {r4, r5} tst r8, #(1 << 30) mov r8, r1 strne r1, [ip], #4 3: subs r2, r2, #64 - stmgeia ip!, {r1, r3-r8, lr} - stmgeia ip!, {r1, r3-r8, lr} + stmiage ip!, {r1, r3-r8, lr} + stmiage ip!, {r1, r3-r8, lr} bgt 3b - ldmeqfd sp!, {r4-r8, pc} + ldmfdeq sp!, {r4-r8, pc} tst r2, #32 - stmneia ip!, {r1, r3-r8, lr} + stmiane ip!, {r1, r3-r8, lr} tst r2, #16 - stmneia ip!, {r4-r7} + stmiane ip!, {r4-r7} ldmfd sp!, {r4-r8, lr} UNWIND( .fnend ) @@ -110,7 +107,7 @@ UNWIND( .fnend ) UNWIND( .fnstart ) 4: tst r2, #8 - stmneia ip!, {r1, r3} + stmiane ip!, {r1, r3} tst r2, #4 strne r1, [ip], #4 /* @@ -118,17 +115,17 @@ UNWIND( .fnstart ) * may have an unaligned pointer as well. */ 5: tst r2, #2 - strneb r1, [ip], #1 - strneb r1, [ip], #1 + strbne r1, [ip], #1 + strbne r1, [ip], #1 tst r2, #1 - strneb r1, [ip], #1 + strbne r1, [ip], #1 ret lr 6: subs r2, r2, #4 @ 1 do we have enough blt 5b @ 1 bytes to align with? cmp r3, #2 @ 1 - strltb r1, [ip], #1 @ 1 - strleb r1, [ip], #1 @ 1 + strblt r1, [ip], #1 @ 1 + strble r1, [ip], #1 @ 1 strb r1, [ip], #1 @ 1 add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) b 1b diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S index 204305956925..8362fe6c0de9 100644 --- a/arch/arm/lib/muldi3.S +++ b/arch/arm/lib/muldi3.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/muldi3.S * * Author: Nicolas Pitre * Created: Oct 19, 2005 * Copyright: Monta Vista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 515eeaa9975c..bdd8836dc5c2 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/putuser.S * * Copyright (C) 2001 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Idea from x86 version, (C) Copyright 1998 Linus Torvalds * * These functions have a non-standard call interface to make diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S index 618fedae4b37..19a96f43f4bb 100644 --- a/arch/arm/lib/setbit.S +++ b/arch/arm/lib/setbit.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/setbit.S * * Copyright (C) 1995-1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/lib/strchr.S b/arch/arm/lib/strchr.S index 013d64c71e8d..09e2cc8a8950 100644 --- a/arch/arm/lib/strchr.S +++ b/arch/arm/lib/strchr.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/strchr.S * * Copyright (C) 1995-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ASM optimised string functions */ #include <linux/linkage.h> diff --git a/arch/arm/lib/strrchr.S b/arch/arm/lib/strrchr.S index 3cec1c7482c4..5e87247d1e8b 100644 --- a/arch/arm/lib/strrchr.S +++ b/arch/arm/lib/strrchr.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/strrchr.S * * Copyright (C) 1995-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ASM optimised string functions */ #include <linux/linkage.h> diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S index 4becdc3a59cb..4ebecc67e6e0 100644 --- a/arch/arm/lib/testchangebit.S +++ b/arch/arm/lib/testchangebit.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/testchangebit.S * * Copyright (C) 1995-1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S index 918841dcce7a..009afa0f5b4a 100644 --- a/arch/arm/lib/testclearbit.S +++ b/arch/arm/lib/testclearbit.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/testclearbit.S * * Copyright (C) 1995-1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S index 8d1b2fe9e487..f3192e55acc8 100644 --- a/arch/arm/lib/testsetbit.S +++ b/arch/arm/lib/testsetbit.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/testsetbit.S * * Copyright (C) 1995-1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 73dc7360cbdd..c9450982a155 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/lib/uaccess_with_memcpy.c * * Written by: Lennert Buytenhek and Nicolas Pitre * Copyright (C) 2009 Marvell Semiconductor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/lib/ucmpdi2.S b/arch/arm/lib/ucmpdi2.S index ad4a6309141a..679e16a210ae 100644 --- a/arch/arm/lib/ucmpdi2.S +++ b/arch/arm/lib/ucmpdi2.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/ucmpdi2.S * * Author: Nicolas Pitre * Created: Oct 19, 2005 * Copyright: Monta Vista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c index 2c40aeab3eaa..b99dd8e1c93f 100644 --- a/arch/arm/lib/xor-neon.c +++ b/arch/arm/lib/xor-neon.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/lib/xor-neon.c * * Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/raid/xor.h> @@ -14,7 +11,7 @@ MODULE_LICENSE("GPL"); #ifndef __ARM_NEON__ -#error You should compile this file with '-mfloat-abi=softfp -mfpu=neon' +#error You should compile this file with '-march=armv7-a -mfloat-abi=softfp -mfpu=neon' #endif /* diff --git a/arch/arm/mach-actions/Makefile b/arch/arm/mach-actions/Makefile index 13831037d8cd..8eae9587fe82 100644 --- a/arch/arm/mach-actions/Makefile +++ b/arch/arm/mach-actions/Makefile @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-${CONFIG_SMP} += platsmp.o diff --git a/arch/arm/mach-actions/platsmp.c b/arch/arm/mach-actions/platsmp.c index 3efaa10efc43..f26618b43514 100644 --- a/arch/arm/mach-actions/platsmp.c +++ b/arch/arm/mach-actions/platsmp.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Actions Semi Leopard * @@ -7,11 +8,6 @@ * Author: Actions Semi, Inc. * * Copyright (c) 2017 Andreas Färber - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include <linux/delay.h> @@ -39,10 +35,6 @@ static void __iomem *sps_base_addr; static void __iomem *timer_base_addr; static int ncores; -static DEFINE_SPINLOCK(boot_lock); - -void owl_secondary_startup(void); - static int s500_wakeup_secondary(unsigned int cpu) { int ret; @@ -84,7 +76,6 @@ static int s500_wakeup_secondary(unsigned int cpu) static int s500_smp_boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; int ret; ret = s500_wakeup_secondary(cpu); @@ -93,21 +84,11 @@ static int s500_smp_boot_secondary(unsigned int cpu, struct task_struct *idle) udelay(10); - spin_lock(&boot_lock); - smp_send_reschedule(cpu); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - if (pen_release == -1) - break; - } - writel(0, timer_base_addr + OWL_CPU1_ADDR + (cpu - 1) * 4); writel(0, timer_base_addr + OWL_CPU1_FLAG + (cpu - 1) * 4); - spin_unlock(&boot_lock); - return 0; } diff --git a/arch/arm/mach-alpine/Makefile b/arch/arm/mach-alpine/Makefile index b6674890be71..acbe0136aff7 100644 --- a/arch/arm/mach-alpine/Makefile +++ b/arch/arm/mach-alpine/Makefile @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-y += alpine_machine.o obj-$(CONFIG_SMP) += platsmp.o alpine_cpu_pm.o diff --git a/arch/arm/mach-alpine/alpine_cpu_pm.c b/arch/arm/mach-alpine/alpine_cpu_pm.c index 121c77c4b53c..13ae8412e9ce 100644 --- a/arch/arm/mach-alpine/alpine_cpu_pm.c +++ b/arch/arm/mach-alpine/alpine_cpu_pm.c @@ -1,17 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Low-level power-management support for Alpine platform. * * Copyright (C) 2015 Annapurna Labs Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/io.h> diff --git a/arch/arm/mach-alpine/alpine_cpu_pm.h b/arch/arm/mach-alpine/alpine_cpu_pm.h index 5179e697c492..398ca6a412fb 100644 --- a/arch/arm/mach-alpine/alpine_cpu_pm.h +++ b/arch/arm/mach-alpine/alpine_cpu_pm.h @@ -1,17 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Low-level power-management support for Alpine platform. * * Copyright (C) 2015 Annapurna Labs Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __ALPINE_CPU_PM_H__ diff --git a/arch/arm/mach-alpine/alpine_cpu_resume.h b/arch/arm/mach-alpine/alpine_cpu_resume.h index c80150c0d2d8..4b550786f1fd 100644 --- a/arch/arm/mach-alpine/alpine_cpu_resume.h +++ b/arch/arm/mach-alpine/alpine_cpu_resume.h @@ -1,17 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Annapurna labs cpu-resume register structure. * * Copyright (C) 2015 Annapurna Labs Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef ALPINE_CPU_RESUME_H_ diff --git a/arch/arm/mach-alpine/alpine_machine.c b/arch/arm/mach-alpine/alpine_machine.c index b8e2145e962b..d256a99e9b99 100644 --- a/arch/arm/mach-alpine/alpine_machine.c +++ b/arch/arm/mach-alpine/alpine_machine.c @@ -1,17 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Machine declaration for Alpine platforms. * * Copyright (C) 2015 Annapurna Labs Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/of_platform.h> diff --git a/arch/arm/mach-alpine/platsmp.c b/arch/arm/mach-alpine/platsmp.c index 6dc6d491f88a..fc4bba2902ad 100644 --- a/arch/arm/mach-alpine/platsmp.c +++ b/arch/arm/mach-alpine/platsmp.c @@ -1,17 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * SMP operations for Alpine platform. * * Copyright (C) 2015 Annapurna Labs Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/init.h> diff --git a/arch/arm/mach-artpec/Kconfig b/arch/arm/mach-artpec/Kconfig index 85a962abb77f..b9a6452d6e8e 100644 --- a/arch/arm/mach-artpec/Kconfig +++ b/arch/arm/mach-artpec/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_ARTPEC bool "Axis Communications ARM based ARTPEC SoCs" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-artpec/Makefile b/arch/arm/mach-artpec/Makefile index 78325f0c859c..fac519012e74 100644 --- a/arch/arm/mach-artpec/Makefile +++ b/arch/arm/mach-artpec/Makefile @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_MACH_ARTPEC6) := board-artpec6.o diff --git a/arch/arm/mach-artpec/board-artpec6.c b/arch/arm/mach-artpec/board-artpec6.c index a0b1979c2c2c..d3cf3e8603e8 100644 --- a/arch/arm/mach-artpec/board-artpec6.c +++ b/arch/arm/mach-artpec/board-artpec6.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * ARTPEC-6 device support. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/amba/bus.h> diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig index 52241207a82a..e42dbaa53bc6 100644 --- a/arch/arm/mach-asm9260/Kconfig +++ b/arch/arm/mach-asm9260/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only config MACH_ASM9260 bool "Alphascale ASM9260" depends on ARCH_MULTI_V5 diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig index 2d5570e6e186..a15c3a291386 100644 --- a/arch/arm/mach-aspeed/Kconfig +++ b/arch/arm/mach-aspeed/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_ASPEED bool "Aspeed BMC architectures" depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 903f23c309df..af41725fcc72 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_AT91 bool "AT91/Microchip SoCs" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M @@ -21,7 +22,6 @@ config SOC_SAMA5D2 depends on ARCH_MULTI_V7 select SOC_SAMA5 select CACHE_L2X0 - select HAVE_FB_ATMEL select HAVE_AT91_UTMI select HAVE_AT91_USB_CLK select HAVE_AT91_H32MX @@ -36,7 +36,6 @@ config SOC_SAMA5D3 bool "SAMA5D3 family" depends on ARCH_MULTI_V7 select SOC_SAMA5 - select HAVE_FB_ATMEL select HAVE_AT91_UTMI select HAVE_AT91_SMD select HAVE_AT91_USB_CLK @@ -50,7 +49,6 @@ config SOC_SAMA5D4 depends on ARCH_MULTI_V7 select SOC_SAMA5 select CACHE_L2X0 - select HAVE_FB_ATMEL select HAVE_AT91_UTMI select HAVE_AT91_SMD select HAVE_AT91_USB_CLK @@ -107,6 +105,29 @@ config SOC_AT91SAM9 AT91SAM9X35 AT91SAM9XE +comment "Clocksource driver selection" + +config ATMEL_CLOCKSOURCE_PIT + bool "Periodic Interval Timer (PIT) support" + depends on SOC_AT91SAM9 || SOC_SAMA5 + default SOC_AT91SAM9 || SOC_SAMA5 + select ATMEL_PIT + help + Select this to get a clocksource based on the Atmel Periodic Interval + Timer. It has a relatively low resolution and the TC Block clocksource + should be preferred. + +config ATMEL_CLOCKSOURCE_TCB + bool "Timer Counter Blocks (TCB) support" + default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAMA5 + select ATMEL_TCB_CLKSRC + help + Select this to get a high precision clocksource based on a + TC block with a 5+ MHz base clock rate. + On platforms with 16-bit counters, two timer channels are combined + to make a single 32-bit timer. + It can also be used as a clock event device supporting oneshot mode. + config HAVE_AT91_UTMI bool diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index eacfc3f5c33e..cec195d4fcba 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # Empty file waiting for deletion once Makefile.boot isn't needed any more. # Patch waits for application at # http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 656ad409a253..4f8186211619 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -1,11 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Setup code for AT91RM9200 * * Copyright (C) 2011 Atmel, * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> * 2012 Joachim Eastwood <manabian@gmail.com> - * - * Licensed under GPLv2 or later. */ #include <linux/of.h> diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c index 3dbdef4d3cbf..bf629c90c758 100644 --- a/arch/arm/mach-at91/at91sam9.c +++ b/arch/arm/mach-at91/at91sam9.c @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Setup code for AT91SAM9 * * Copyright (C) 2011 Atmel, * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. */ #include <linux/of.h> @@ -32,3 +31,21 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9") .init_machine = at91sam9_init, .dt_compat = at91_dt_board_compat, MACHINE_END + +static void __init sam9x60_init(void) +{ + of_platform_default_populate(NULL, NULL, NULL); + + sam9x60_pm_init(); +} + +static const char *const sam9x60_dt_board_compat[] __initconst = { + "microchip,sam9x60", + NULL +}; + +DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60") + /* Maintainer: Microchip */ + .init_machine = sam9x60_init, + .dt_compat = sam9x60_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index e2bd17237964..0a4cdcb4985b 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mach-at91/generic.h * * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _AT91_GENERIC_H @@ -14,11 +11,13 @@ #ifdef CONFIG_PM extern void __init at91rm9200_pm_init(void); extern void __init at91sam9_pm_init(void); +extern void __init sam9x60_pm_init(void); extern void __init sama5_pm_init(void); extern void __init sama5d2_pm_init(void); #else static inline void __init at91rm9200_pm_init(void) { } static inline void __init at91sam9_pm_init(void) { } +static inline void __init sam9x60_pm_init(void) { } static inline void __init sama5_pm_init(void) { } static inline void __init sama5d2_pm_init(void) { } #endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 51e808adb00c..da85e64143e9 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-at91/pm.c * AT91 Power Management * * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/genalloc.h> @@ -39,6 +35,20 @@ extern void at91_pinctrl_gpio_suspend(void); extern void at91_pinctrl_gpio_resume(void); #endif +struct at91_soc_pm { + int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity); + int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity); + const struct of_device_id *ws_ids; + struct at91_pm_data data; +}; + +static struct at91_soc_pm soc_pm = { + .data = { + .standby_mode = AT91_PM_STANDBY, + .suspend_mode = AT91_PM_ULP0, + }, +}; + static const match_table_t pm_modes __initconst = { { AT91_PM_STANDBY, "standby" }, { AT91_PM_ULP0, "ulp0" }, @@ -47,16 +57,11 @@ static const match_table_t pm_modes __initconst = { { -1, NULL }, }; -static struct at91_pm_data pm_data = { - .standby_mode = AT91_PM_STANDBY, - .suspend_mode = AT91_PM_ULP0, -}; - #define at91_ramc_read(id, field) \ - __raw_readl(pm_data.ramc[id] + field) + __raw_readl(soc_pm.data.ramc[id] + field) #define at91_ramc_write(id, field, value) \ - __raw_writel(value, pm_data.ramc[id] + field) + __raw_writel(value, soc_pm.data.ramc[id] + field) static int at91_pm_valid_state(suspend_state_t state) { @@ -91,6 +96,8 @@ static const struct wakeup_source_info ws_info[] = { { .pmc_fsmr_bit = AT91_PMC_RTCAL, .shdwc_mr_bit = BIT(17) }, { .pmc_fsmr_bit = AT91_PMC_USBAL }, { .pmc_fsmr_bit = AT91_PMC_SDMMC_CD }, + { .pmc_fsmr_bit = AT91_PMC_RTTAL }, + { .pmc_fsmr_bit = AT91_PMC_RXLP_MCE }, }; static const struct of_device_id sama5d2_ws_ids[] = { @@ -105,6 +112,17 @@ static const struct of_device_id sama5d2_ws_ids[] = { { /* sentinel */ } }; +static const struct of_device_id sam9x60_ws_ids[] = { + { .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] }, + { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, + { .compatible = "usb-ohci", .data = &ws_info[2] }, + { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, + { .compatible = "usb-ehci", .data = &ws_info[2] }, + { .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] }, + { .compatible = "cdns,sam9x60-macb", .data = &ws_info[5] }, + { /* sentinel */ } +}; + static int at91_pm_config_ws(unsigned int pm_mode, bool set) { const struct wakeup_source_info *wsi; @@ -116,24 +134,22 @@ static int at91_pm_config_ws(unsigned int pm_mode, bool set) if (pm_mode != AT91_PM_ULP1) return 0; - if (!pm_data.pmc || !pm_data.shdwc) + if (!soc_pm.data.pmc || !soc_pm.data.shdwc || !soc_pm.ws_ids) return -EPERM; if (!set) { - writel(mode, pm_data.pmc + AT91_PMC_FSMR); + writel(mode, soc_pm.data.pmc + AT91_PMC_FSMR); return 0; } - /* SHDWC.WUIR */ - val = readl(pm_data.shdwc + 0x0c); - mode |= (val & 0x3ff); - polarity |= ((val >> 16) & 0x3ff); + if (soc_pm.config_shdwc_ws) + soc_pm.config_shdwc_ws(soc_pm.data.shdwc, &mode, &polarity); /* SHDWC.MR */ - val = readl(pm_data.shdwc + 0x04); + val = readl(soc_pm.data.shdwc + 0x04); /* Loop through defined wakeup sources. */ - for_each_matching_node_and_match(np, sama5d2_ws_ids, &match) { + for_each_matching_node_and_match(np, soc_pm.ws_ids, &match) { pdev = of_find_device_by_node(np); if (!pdev) continue; @@ -155,8 +171,8 @@ put_device: } if (mode) { - writel(mode, pm_data.pmc + AT91_PMC_FSMR); - writel(polarity, pm_data.pmc + AT91_PMC_FSPR); + if (soc_pm.config_pmc_ws) + soc_pm.config_pmc_ws(soc_pm.data.pmc, mode, polarity); } else { pr_err("AT91: PM: no ULP1 wakeup sources found!"); } @@ -164,6 +180,34 @@ put_device: return mode ? 0 : -EPERM; } +static int at91_sama5d2_config_shdwc_ws(void __iomem *shdwc, u32 *mode, + u32 *polarity) +{ + u32 val; + + /* SHDWC.WUIR */ + val = readl(shdwc + 0x0c); + *mode |= (val & 0x3ff); + *polarity |= ((val >> 16) & 0x3ff); + + return 0; +} + +static int at91_sama5d2_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity) +{ + writel(mode, pmc + AT91_PMC_FSMR); + writel(polarity, pmc + AT91_PMC_FSPR); + + return 0; +} + +static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity) +{ + writel(mode, pmc + AT91_PMC_FSMR); + + return 0; +} + /* * Called after processes are frozen, but before we shutdown devices. */ @@ -171,18 +215,18 @@ static int at91_pm_begin(suspend_state_t state) { switch (state) { case PM_SUSPEND_MEM: - pm_data.mode = pm_data.suspend_mode; + soc_pm.data.mode = soc_pm.data.suspend_mode; break; case PM_SUSPEND_STANDBY: - pm_data.mode = pm_data.standby_mode; + soc_pm.data.mode = soc_pm.data.standby_mode; break; default: - pm_data.mode = -1; + soc_pm.data.mode = -1; } - return at91_pm_config_ws(pm_data.mode, true); + return at91_pm_config_ws(soc_pm.data.mode, true); } /* @@ -194,10 +238,10 @@ static int at91_pm_verify_clocks(void) unsigned long scsr; int i; - scsr = readl(pm_data.pmc + AT91_PMC_SCSR); + scsr = readl(soc_pm.data.pmc + AT91_PMC_SCSR); /* USB must not be using PLLB */ - if ((scsr & pm_data.uhp_udp_mask) != 0) { + if ((scsr & soc_pm.data.uhp_udp_mask) != 0) { pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); return 0; } @@ -208,7 +252,7 @@ static int at91_pm_verify_clocks(void) if ((scsr & (AT91_PMC_PCK0 << i)) == 0) continue; - css = readl(pm_data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS; + css = readl(soc_pm.data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS; if (css != AT91_PMC_CSS_SLOW) { pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css); return 0; @@ -230,7 +274,7 @@ static int at91_pm_verify_clocks(void) */ int at91_suspend_entering_slow_clock(void) { - return (pm_data.mode >= AT91_PM_ULP0); + return (soc_pm.data.mode >= AT91_PM_ULP0); } EXPORT_SYMBOL(at91_suspend_entering_slow_clock); @@ -243,14 +287,14 @@ static int at91_suspend_finish(unsigned long val) flush_cache_all(); outer_disable(); - at91_suspend_sram_fn(&pm_data); + at91_suspend_sram_fn(&soc_pm.data); return 0; } static void at91_pm_suspend(suspend_state_t state) { - if (pm_data.mode == AT91_PM_BACKUP) { + if (soc_pm.data.mode == AT91_PM_BACKUP) { pm_bu->suspended = 1; cpu_suspend(0, at91_suspend_finish); @@ -289,7 +333,7 @@ static int at91_pm_enter(suspend_state_t state) /* * Ensure that clocks are in a valid state. */ - if (pm_data.mode >= AT91_PM_ULP0 && + if (soc_pm.data.mode >= AT91_PM_ULP0 && !at91_pm_verify_clocks()) goto error; @@ -318,7 +362,7 @@ error: */ static void at91_pm_end(void) { - at91_pm_config_ws(pm_data.mode, false); + at91_pm_config_ws(soc_pm.data.mode, false); } @@ -351,7 +395,7 @@ static void at91rm9200_standby(void) " str %2, [%1, %3]\n\t" " mcr p15, 0, %0, c7, c0, 4\n\t" : - : "r" (0), "r" (pm_data.ramc[0]), + : "r" (0), "r" (soc_pm.data.ramc[0]), "r" (1), "r" (AT91_MC_SDRAMC_SRR)); } @@ -374,7 +418,7 @@ static void at91_ddr_standby(void) at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr); } - if (pm_data.ramc[1]) { + if (soc_pm.data.ramc[1]) { saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; @@ -392,14 +436,14 @@ static void at91_ddr_standby(void) /* self-refresh mode now */ at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); - if (pm_data.ramc[1]) + if (soc_pm.data.ramc[1]) at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); cpu_do_idle(); at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0); at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); - if (pm_data.ramc[1]) { + if (soc_pm.data.ramc[1]) { at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1); at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); } @@ -429,7 +473,7 @@ static void at91sam9_sdram_standby(void) u32 lpr0, lpr1 = 0; u32 saved_lpr0, saved_lpr1 = 0; - if (pm_data.ramc[1]) { + if (soc_pm.data.ramc[1]) { saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR); lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB; lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH; @@ -441,13 +485,13 @@ static void at91sam9_sdram_standby(void) /* self-refresh mode now */ at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0); - if (pm_data.ramc[1]) + if (soc_pm.data.ramc[1]) at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1); cpu_do_idle(); at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0); - if (pm_data.ramc[1]) + if (soc_pm.data.ramc[1]) at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); } @@ -480,14 +524,14 @@ static __init void at91_dt_ramc(void) const struct ramc_info *ramc; for_each_matching_node_and_match(np, ramc_ids, &of_id) { - pm_data.ramc[idx] = of_iomap(np, 0); - if (!pm_data.ramc[idx]) + soc_pm.data.ramc[idx] = of_iomap(np, 0); + if (!soc_pm.data.ramc[idx]) panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx); ramc = of_id->data; if (!standby) standby = ramc->idle; - pm_data.memctrl = ramc->memctrl; + soc_pm.data.memctrl = ramc->memctrl; idx++; } @@ -509,12 +553,17 @@ static void at91rm9200_idle(void) * Disable the processor clock. The processor will be automatically * re-enabled by an interrupt or by a reset. */ - writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR); + writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR); +} + +static void at91sam9x60_idle(void) +{ + cpu_do_idle(); } static void at91sam9_idle(void) { - writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR); + writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR); cpu_do_idle(); } @@ -566,8 +615,8 @@ static void __init at91_pm_sram_init(void) static bool __init at91_is_pm_mode_active(int pm_mode) { - return (pm_data.standby_mode == pm_mode || - pm_data.suspend_mode == pm_mode); + return (soc_pm.data.standby_mode == pm_mode || + soc_pm.data.suspend_mode == pm_mode); } static int __init at91_pm_backup_init(void) @@ -577,6 +626,9 @@ static int __init at91_pm_backup_init(void) struct platform_device *pdev = NULL; int ret = -ENODEV; + if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) + return -EPERM; + if (!at91_is_pm_mode_active(AT91_PM_BACKUP)) return 0; @@ -586,18 +638,18 @@ static int __init at91_pm_backup_init(void) return ret; } - pm_data.sfrbu = of_iomap(np, 0); + soc_pm.data.sfrbu = of_iomap(np, 0); of_node_put(np); np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam"); if (!np) - goto securam_fail; + goto securam_fail_no_ref_dev; pdev = of_find_device_by_node(np); of_node_put(np); if (!pdev) { pr_warn("%s: failed to find securam device!\n", __func__); - goto securam_fail; + goto securam_fail_no_ref_dev; } sram_pool = gen_pool_get(&pdev->dev, NULL); @@ -620,8 +672,10 @@ static int __init at91_pm_backup_init(void) return 0; securam_fail: - iounmap(pm_data.sfrbu); - pm_data.sfrbu = NULL; + put_device(&pdev->dev); +securam_fail_no_ref_dev: + iounmap(soc_pm.data.sfrbu); + soc_pm.data.sfrbu = NULL; return ret; } @@ -630,10 +684,10 @@ static void __init at91_pm_use_default_mode(int pm_mode) if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP) return; - if (pm_data.standby_mode == pm_mode) - pm_data.standby_mode = AT91_PM_ULP0; - if (pm_data.suspend_mode == pm_mode) - pm_data.suspend_mode = AT91_PM_ULP0; + if (soc_pm.data.standby_mode == pm_mode) + soc_pm.data.standby_mode = AT91_PM_ULP0; + if (soc_pm.data.suspend_mode == pm_mode) + soc_pm.data.suspend_mode = AT91_PM_ULP0; } static void __init at91_pm_modes_init(void) @@ -651,7 +705,7 @@ static void __init at91_pm_modes_init(void) goto ulp1_default; } - pm_data.shdwc = of_iomap(np, 0); + soc_pm.data.shdwc = of_iomap(np, 0); of_node_put(np); ret = at91_pm_backup_init(); @@ -665,8 +719,8 @@ static void __init at91_pm_modes_init(void) return; unmap: - iounmap(pm_data.shdwc); - pm_data.shdwc = NULL; + iounmap(soc_pm.data.shdwc); + soc_pm.data.shdwc = NULL; ulp1_default: at91_pm_use_default_mode(AT91_PM_ULP1); backup_default: @@ -709,14 +763,14 @@ static void __init at91_pm_init(void (*pm_idle)(void)) platform_device_register(&at91_cpuidle_device); pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id); - pm_data.pmc = of_iomap(pmc_np, 0); - if (!pm_data.pmc) { + soc_pm.data.pmc = of_iomap(pmc_np, 0); + if (!soc_pm.data.pmc) { pr_err("AT91: PM not supported, PMC not found\n"); return; } pmc = of_id->data; - pm_data.uhp_udp_mask = pmc->uhp_udp_mask; + soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask; if (pm_idle) arm_pm_idle = pm_idle; @@ -726,8 +780,8 @@ static void __init at91_pm_init(void (*pm_idle)(void)) if (at91_suspend_sram_fn) { suspend_set_ops(&at91_pm_ops); pr_info("AT91: PM: standby: %s, suspend: %s\n", - pm_modes[pm_data.standby_mode].pattern, - pm_modes[pm_data.suspend_mode].pattern); + pm_modes[soc_pm.data.standby_mode].pattern, + pm_modes[soc_pm.data.suspend_mode].pattern); } else { pr_info("AT91: PM not supported, due to no SRAM allocated\n"); } @@ -748,6 +802,19 @@ void __init at91rm9200_pm_init(void) at91_pm_init(at91rm9200_idle); } +void __init sam9x60_pm_init(void) +{ + if (!IS_ENABLED(CONFIG_SOC_AT91SAM9)) + return; + + at91_pm_modes_init(); + at91_dt_ramc(); + at91_pm_init(at91sam9x60_idle); + + soc_pm.ws_ids = sam9x60_ws_ids; + soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws; +} + void __init at91sam9_pm_init(void) { if (!IS_ENABLED(CONFIG_SOC_AT91SAM9)) @@ -773,6 +840,10 @@ void __init sama5d2_pm_init(void) at91_pm_modes_init(); sama5_pm_init(); + + soc_pm.ws_ids = sama5d2_ws_ids; + soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws; + soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws; } static int __init at91_pm_modes_select(char *str) @@ -793,8 +864,8 @@ static int __init at91_pm_modes_select(char *str) if (suspend < 0) return 0; - pm_data.standby_mode = standby; - pm_data.suspend_mode = suspend; + soc_pm.data.standby_mode = standby; + soc_pm.data.suspend_mode = suspend; return 0; } diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 9bd4e6ca672a..9fa4f483f2b5 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * AT91 Power Management * * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __ARCH_ARM_MACH_AT91_PM #define __ARCH_ARM_MACH_AT91_PM diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index bfe1c4d06901..c751f047b116 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-at91/pm_slow_clock.S * @@ -5,11 +6,6 @@ * * AT91SAM9 support: * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/linkage.h> #include <linux/clk/at91_pmc.h> @@ -51,15 +47,6 @@ tmp2 .req r5 .endm /* - * Wait until PLLA has locked. - */ - .macro wait_pllalock -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_LOCKA - beq 1b - .endm - -/* * Put the processor to enter the idle state */ .macro at91_cpu_idle @@ -178,11 +165,46 @@ ENDPROC(at91_backup_mode) orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] + /* Save RC oscillator state */ + ldr tmp1, [pmc, #AT91_PMC_SR] + str tmp1, .saved_osc_status + tst tmp1, #AT91_PMC_MOSCRCS + bne 1f + + /* Turn off RC oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCRCEN + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + /* Wait main RC disabled done */ +2: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MOSCRCS + bne 2b + /* Wait for interrupt */ - at91_cpu_idle +1: at91_cpu_idle - /* Turn on the crystal oscillator */ + /* Restore RC oscillator state */ + ldr tmp1, .saved_osc_status + tst tmp1, #AT91_PMC_MOSCRCS + beq 4f + + /* Turn on RC oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCRCEN + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + /* Wait main RC stabilization */ +3: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MOSCRCS + beq 3b + + /* Turn on the crystal oscillator */ +4: ldr tmp1, [pmc, #AT91_CKGR_MOR] orr tmp1, tmp1, #AT91_PMC_MOSCEN orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] @@ -197,8 +219,26 @@ ENDPROC(at91_backup_mode) .macro at91_pm_ulp1_mode ldr pmc, .pmc_base - /* Switch the main clock source to 12-MHz RC oscillator */ + /* Save RC oscillator state and check if it is enabled. */ + ldr tmp1, [pmc, #AT91_PMC_SR] + str tmp1, .saved_osc_status + tst tmp1, #AT91_PMC_MOSCRCS + bne 2f + + /* Enable RC oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCRCEN + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + /* Wait main RC stabilization */ +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MOSCRCS + beq 1b + + /* Switch the main clock source to 12-MHz RC oscillator */ +2: ldr tmp1, [pmc, #AT91_CKGR_MOR] bic tmp1, tmp1, #AT91_PMC_MOSCSEL bic tmp1, tmp1, #AT91_PMC_KEY_MASK orr tmp1, tmp1, #AT91_PMC_KEY @@ -262,6 +302,25 @@ ENDPROC(at91_backup_mode) str tmp1, [pmc, #AT91_PMC_MCKR] wait_mckrdy + + /* Restore RC oscillator state */ + ldr tmp1, .saved_osc_status + tst tmp1, #AT91_PMC_MOSCRCS + bne 3f + + /* Disable RC oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCRCEN + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + /* Wait RC oscillator disable done */ +4: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MOSCRCS + bne 4b + +3: .endm ENTRY(at91_ulp_mode) @@ -279,14 +338,6 @@ ENTRY(at91_ulp_mode) wait_mckrdy - /* Save PLLA setting and disable it */ - ldr tmp1, [pmc, #AT91_CKGR_PLLAR] - str tmp1, .saved_pllar - - mov tmp1, #AT91_PMC_PLLCOUNT - orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ - str tmp1, [pmc, #AT91_CKGR_PLLAR] - ldr r0, .pm_mode cmp r0, #AT91_PM_ULP1 beq ulp1_mode @@ -301,18 +352,6 @@ ulp1_mode: ulp_exit: ldr pmc, .pmc_base - /* Restore PLLA setting */ - ldr tmp1, .saved_pllar - str tmp1, [pmc, #AT91_CKGR_PLLAR] - - tst tmp1, #(AT91_PMC_MUL & 0xff0000) - bne 3f - tst tmp1, #(AT91_PMC_MUL & ~0xff0000) - beq 4f -3: - wait_pllalock -4: - /* * Restore master clock setting */ @@ -465,8 +504,6 @@ ENDPROC(at91_sramc_self_refresh) .word 0 .saved_mckr: .word 0 -.saved_pllar: - .word 0 .saved_sam9_lpr: .word 0 .saved_sam9_lpr1: @@ -475,6 +512,8 @@ ENDPROC(at91_sramc_self_refresh) .word 0 .saved_sam9_mdr1: .word 0 +.saved_osc_status: + .word 0 ENTRY(at91_pm_suspend_in_sram_sz) .word .-at91_pm_suspend_in_sram diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index 3d0bf95a56ae..89dab7cf01e8 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Setup code for SAMA5 * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * Licensed under GPLv2 or later. */ #include <linux/of.h> diff --git a/arch/arm/mach-at91/samv7.c b/arch/arm/mach-at91/samv7.c index 11386f190c83..28f998f0fba5 100644 --- a/arch/arm/mach-at91/samv7.c +++ b/arch/arm/mach-at91/samv7.c @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Setup code for SAMv7x * * Copyright (C) 2013 Atmel, * 2016 Andras Szemzo <szemzo.andras@gmail.com> - * - * Licensed under GPLv2 or later. */ #include <linux/of.h> #include <linux/of_platform.h> diff --git a/arch/arm/mach-axxia/axxia.c b/arch/arm/mach-axxia/axxia.c index 4db76a493c5a..e21582a7fa11 100644 --- a/arch/arm/mach-axxia/axxia.c +++ b/arch/arm/mach-axxia/axxia.c @@ -1,17 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Support for the LSI Axxia SoC devices based on ARM cores. * * Copyright (C) 2012 LSI - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/init.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c index 502e3df69f69..512943eae30a 100644 --- a/arch/arm/mach-axxia/platsmp.c +++ b/arch/arm/mach-axxia/platsmp.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-axxia/platsmp.c * * Copyright (C) 2012 LSI Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index a067adf9f1ee..4ef1e55f4a0b 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -167,6 +167,7 @@ config ARCH_BCM2835 select BCM2835_TIMER select PINCTRL select PINCTRL_BCM2835 + select MFD_CORE help This enables support for the Broadcom BCM2835 and BCM2836 SoCs. This SoC is used in the Raspberry Pi and Roku 2 devices. diff --git a/arch/arm/mach-bcm/bcm63xx_pmb.c b/arch/arm/mach-bcm/bcm63xx_pmb.c index 41dcf5d65630..0e5a05bac3ea 100644 --- a/arch/arm/mach-bcm/bcm63xx_pmb.c +++ b/arch/arm/mach-bcm/bcm63xx_pmb.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Broadcom BCM63138 PMB initialization for secondary CPU(s) * * Copyright (C) 2015 Broadcom Corporation * Author: Florian Fainelli <f.fainelli@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/kernel.h> #include <linux/io.h> diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c index f5fb10b4376f..83dd0c10fa47 100644 --- a/arch/arm/mach-bcm/bcm63xx_smp.c +++ b/arch/arm/mach-bcm/bcm63xx_smp.c @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Broadcom BCM63138 DSL SoCs SMP support code * * Copyright (C) 2015, Broadcom Corporation - * - * Licensed under the terms of the GPLv2 */ #include <linux/delay.h> diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 3d719cf645e3..5b1f61fd7878 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_BERLIN bool "Marvell Berlin SoCs" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-berlin/Makefile b/arch/arm/mach-berlin/Makefile index c0719ecd1890..0d338e8ccf90 100644 --- a/arch/arm/mach-berlin/Makefile +++ b/arch/arm/mach-berlin/Makefile @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-y += berlin.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-clps711x/board-dt.c b/arch/arm/mach-clps711x/board-dt.c index 4c89a8e9a2e3..0b22a12e7151 100644 --- a/arch/arm/mach-clps711x/board-dt.c +++ b/arch/arm/mach-clps711x/board-dt.c @@ -1,10 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Author: Alexander Shiyan <shc_work@mail.ru>, 2016 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/io.h> diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 6428bcc77e87..9099560aa462 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Cavium Networks CNS3420 Validation Board * @@ -7,10 +8,6 @@ * Scott Shu * Copyright 2010 MontaVista Software, LLC. * Anton Vorontsov <avorontsov@mvista.com> - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-cns3xxx/cns3xxx.h b/arch/arm/mach-cns3xxx/cns3xxx.h index a642ba5feb64..cbb105a74f90 100644 --- a/arch/arm/mach-cns3xxx/cns3xxx.h +++ b/arch/arm/mach-cns3xxx/cns3xxx.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. */ #ifndef __MACH_BOARD_CNS3XXXH diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 7d5a44a06648..1d61a7701c11 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 1999 - 2003 ARM Limited * Copyright 2000 Deep Blue Solutions Ltd * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. */ #include <linux/init.h> @@ -90,7 +87,7 @@ void __init cns3xxx_map_io(void) /* used by entry-macro.S */ void __init cns3xxx_init_irq(void) { - gic_init(0, 29, IOMEM(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), + gic_init(IOMEM(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), IOMEM(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT)); } diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h index dc5df7f1e39f..a96eabaea301 100644 --- a/arch/arm/mach-cns3xxx/core.h +++ b/arch/arm/mach-cns3xxx/core.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2000 Deep Blue Solutions Ltd * Copyright 2004 ARM Limited * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. */ #ifndef __CNS3XXX_CORE_H diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c index 7da78a2451f1..0f1ba8a0377d 100644 --- a/arch/arm/mach-cns3xxx/devices.c +++ b/arch/arm/mach-cns3xxx/devices.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * CNS3xxx common devices * @@ -5,10 +6,6 @@ * Scott Shu * Copyright 2010 MontaVista Software, LLC. * Anton Vorontsov <avorontsov@mvista.com> - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. */ #include <linux/io.h> diff --git a/arch/arm/mach-cns3xxx/devices.h b/arch/arm/mach-cns3xxx/devices.h index 27e15a10aa85..ab16530d0116 100644 --- a/arch/arm/mach-cns3xxx/devices.h +++ b/arch/arm/mach-cns3xxx/devices.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * CNS3xxx common devices * @@ -5,10 +6,6 @@ * Scott Shu * Copyright 2010 MontaVista Software, LLC. * Anton Vorontsov <avorontsov@mvista.com> - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. */ #ifndef __CNS3XXX_DEVICES_H_ diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 95a11d5b3587..e92fbd679dfb 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * PCI-E support for CNS3xxx * @@ -5,10 +6,6 @@ * Richard Liu <richard.liu@caviumnetworks.com> * Copyright 2010 MontaVista Software, LLC. * Anton Vorontsov <avorontsov@mvista.com> - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c index f46b78dd6136..72e8a7ec7a38 100644 --- a/arch/arm/mach-cns3xxx/pm.c +++ b/arch/arm/mach-cns3xxx/pm.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-cns3xxx/pm.h b/arch/arm/mach-cns3xxx/pm.h index c2588cc991d1..61b73e59f0ff 100644 --- a/arch/arm/mach-cns3xxx/pm.h +++ b/arch/arm/mach-cns3xxx/pm.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2000 Deep Blue Solutions Ltd * Copyright 2004 ARM Limited * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. */ #ifndef __CNS3XXX_PM_H diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index da8a039d65f9..5a59cebc7d0a 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -1,13 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 if ARCH_DAVINCI -config AINTC - bool - -config CP_INTC - bool - select IRQ_DOMAIN - config ARCH_DAVINCI_DMx bool @@ -17,17 +10,17 @@ comment "DaVinci Core Type" config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" - select AINTC + select DAVINCI_AINTC select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DM355 bool "DaVinci 355 based system" - select AINTC + select DAVINCI_AINTC select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DM646x bool "DaVinci 646x based system" - select AINTC + select DAVINCI_AINTC select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DA830 @@ -36,20 +29,20 @@ config ARCH_DAVINCI_DA830 select ARCH_DAVINCI_DA8XX # needed on silicon revs 1.0, 1.1: select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE - select CP_INTC + select DAVINCI_CP_INTC config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) select ARCH_DAVINCI_DA8XX - select CP_INTC + select DAVINCI_CP_INTC config ARCH_DAVINCI_DA8XX bool config ARCH_DAVINCI_DM365 bool "DaVinci 365 based system" - select AINTC + select DAVINCI_AINTC select ARCH_DAVINCI_DMx comment "DaVinci Board Type" diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 93d271b4d84b..f76a8482784f 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -18,9 +18,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o usb-da8xx.o obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o usb-da8xx.o -obj-$(CONFIG_AINTC) += irq.o -obj-$(CONFIG_CP_INTC) += cp_intc.o - # Board specific obj-$(CONFIG_MACH_DA8XX_DT) += da8xx-dt.o pdata-quirks.o obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h index 495aa6907cbc..d0ecd1d0f084 100644 --- a/arch/arm/mach-davinci/asp.h +++ b/arch/arm/mach-davinci/asp.h @@ -49,9 +49,9 @@ #define DAVINCI_DA830_DMA_MCASP2_AXEVT 5 /* Interrupts */ -#define DAVINCI_ASP0_RX_INT IRQ_MBRINT -#define DAVINCI_ASP0_TX_INT IRQ_MBXINT -#define DAVINCI_ASP1_RX_INT IRQ_MBRINT -#define DAVINCI_ASP1_TX_INT IRQ_MBXINT +#define DAVINCI_ASP0_RX_INT DAVINCI_INTC_IRQ(IRQ_MBRINT) +#define DAVINCI_ASP0_TX_INT DAVINCI_INTC_IRQ(IRQ_MBXINT) +#define DAVINCI_ASP1_RX_INT DAVINCI_INTC_IRQ(IRQ_MBRINT) +#define DAVINCI_ASP1_TX_INT DAVINCI_INTC_IRQ(IRQ_MBXINT) #endif /* __ASM_ARCH_DAVINCI_ASP_H */ diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index c4da635ee4ce..a273ab25c668 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -18,7 +18,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/platform_data/pcf857x.h> -#include <linux/platform_data/at24.h> +#include <linux/property.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> @@ -29,6 +29,7 @@ #include <linux/platform_data/spi-davinci.h> #include <linux/platform_data/usb-davinci.h> #include <linux/platform_data/ti-aemif.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/nvmem-provider.h> @@ -36,10 +37,11 @@ #include <asm/mach/arch.h> #include <mach/common.h> -#include "cp_intc.h" #include <mach/mux.h> #include <mach/da8xx.h> +#include "irqs.h" + #define DA830_EVM_PHY_ID "" /* * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. @@ -52,62 +54,58 @@ static const short da830_evm_usb11_pins[] = { -1 }; -static da8xx_ocic_handler_t da830_evm_usb_ocic_handler; +static struct regulator_consumer_supply da830_evm_usb_supplies[] = { + REGULATOR_SUPPLY("vbus", NULL), +}; -static int da830_evm_usb_set_power(unsigned port, int on) -{ - gpio_set_value(ON_BD_USB_DRV, on); - return 0; -} +static struct regulator_init_data da830_evm_usb_vbus_data = { + .consumer_supplies = da830_evm_usb_supplies, + .num_consumer_supplies = ARRAY_SIZE(da830_evm_usb_supplies), + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; -static int da830_evm_usb_get_power(unsigned port) -{ - return gpio_get_value(ON_BD_USB_DRV); -} +static struct fixed_voltage_config da830_evm_usb_vbus = { + .supply_name = "vbus", + .microvolts = 33000000, + .init_data = &da830_evm_usb_vbus_data, +}; -static int da830_evm_usb_get_oci(unsigned port) -{ - return !gpio_get_value(ON_BD_USB_OVC); -} +static struct platform_device da830_evm_usb_vbus_device = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &da830_evm_usb_vbus, + }, +}; -static irqreturn_t da830_evm_usb_ocic_irq(int, void *); +static struct gpiod_lookup_table da830_evm_usb_oc_gpio_lookup = { + .dev_id = "ohci-da8xx", + .table = { + GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0), + { } + }, +}; -static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler) -{ - int irq = gpio_to_irq(ON_BD_USB_OVC); - int error = 0; - - if (handler != NULL) { - da830_evm_usb_ocic_handler = handler; - - error = request_irq(irq, da830_evm_usb_ocic_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "OHCI over-current indicator", NULL); - if (error) - pr_err("%s: could not request IRQ to watch over-current indicator changes\n", - __func__); - } else - free_irq(irq, NULL); - - return error; -} +static struct gpiod_lookup_table da830_evm_usb_vbus_gpio_lookup = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, NULL, 0), + { } + }, +}; -static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = { - .set_power = da830_evm_usb_set_power, - .get_power = da830_evm_usb_get_power, - .get_oci = da830_evm_usb_get_oci, - .ocic_notify = da830_evm_usb_ocic_notify, +static struct gpiod_lookup_table *da830_evm_usb_gpio_lookups[] = { + &da830_evm_usb_oc_gpio_lookup, + &da830_evm_usb_vbus_gpio_lookup, +}; +static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = { /* TPS2065 switch @ 5V */ .potpgt = (3 + 1) / 2, /* 3 ms max */ }; -static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id) -{ - da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1); - return IRQ_HANDLED; -} - static __init void da830_evm_usb_init(void) { int ret; @@ -117,6 +115,9 @@ static __init void da830_evm_usb_init(void) pr_warn("%s: USB PHY CLK registration failed: %d\n", __func__, ret); + gpiod_add_lookup_tables(da830_evm_usb_gpio_lookups, + ARRAY_SIZE(da830_evm_usb_gpio_lookups)); + ret = da8xx_register_usb_phy(); if (ret) pr_warn("%s: USB PHY registration failed: %d\n", @@ -142,21 +143,11 @@ static __init void da830_evm_usb_init(void) return; } - ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV"); - if (ret) { - pr_err("%s: failed to request GPIO for USB 1.1 port power control: %d\n", - __func__, ret); - return; - } - gpio_direction_output(ON_BD_USB_DRV, 0); - - ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC"); + ret = platform_device_register(&da830_evm_usb_vbus_device); if (ret) { - pr_err("%s: failed to request GPIO for USB 1.1 port over-current indicator: %d\n", - __func__, ret); + pr_warn("%s: Unable to register the vbus supply\n", __func__); return; } - gpio_direction_input(ON_BD_USB_OVC); ret = da8xx_register_usb11(&da830_evm_usb11_pdata); if (ret) @@ -212,6 +203,7 @@ static struct gpiod_lookup_table mmc_gpios_table = { GPIO_ACTIVE_LOW), GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp", GPIO_ACTIVE_LOW), + { } }, }; @@ -457,12 +449,9 @@ static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = { .con_id = "mac-address", }; -static struct at24_platform_data da830_evm_i2c_eeprom_info = { - .byte_len = SZ_256K / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, - .setup = davinci_get_mac_addr, - .context = (void *)0x7f00, +static const struct property_entry da830_evm_i2c_eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 64), + { } }; static int __init da830_evm_ui_expander_setup(struct i2c_client *client, @@ -496,7 +485,7 @@ static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = { static struct i2c_board_info __initdata da830_evm_i2c_devices[] = { { I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &da830_evm_i2c_eeprom_info, + .properties = da830_evm_i2c_eeprom_properties, }, { I2C_BOARD_INFO("tlv320aic3x", 0x18), @@ -693,7 +682,7 @@ static void __init da830_evm_map_io(void) MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM") .atag_offset = 0x100, .map_io = da830_evm_map_io, - .init_irq = cp_intc_init, + .init_irq = da830_init_irq, .init_time = da830_init_time, .init_machine = da830_evm_init, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 44bca048dfd0..31ae3be5741d 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -43,9 +43,10 @@ #include <linux/spi/flash.h> #include <mach/common.h> -#include "cp_intc.h" #include <mach/da8xx.h> #include <mach/mux.h> + +#include "irqs.h" #include "sram.h" #include <asm/mach-types.h> @@ -150,32 +151,6 @@ static struct spi_board_info da850evm_spi_info[] = { }, }; -#ifdef CONFIG_MTD -static void da850_evm_m25p80_notify_add(struct mtd_info *mtd) -{ - char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; - size_t retlen; - - if (!strcmp(mtd->name, "MAC-Address")) { - mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr); - if (retlen == ETH_ALEN) - pr_info("Read MAC addr from SPI Flash: %pM\n", - mac_addr); - } -} - -static struct mtd_notifier da850evm_spi_notifier = { - .add = da850_evm_m25p80_notify_add, -}; - -static void da850_evm_setup_mac_addr(void) -{ - register_mtd_user(&da850evm_spi_notifier); -} -#else -static void da850_evm_setup_mac_addr(void) { } -#endif - static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "bootloaders + env", @@ -809,6 +784,7 @@ static struct gpiod_lookup_table mmc_gpios_table = { GPIO_ACTIVE_LOW), GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp", GPIO_ACTIVE_HIGH), + { } }, }; @@ -1064,6 +1040,17 @@ static const short da850_evm_rmii_pins[] = { -1 }; +static struct gpiod_hog da850_evm_emac_gpio_hogs[] = { + { + .chip_label = "davinci_gpio", + .chip_hwnum = DA850_MII_MDIO_CLKEN_PIN, + .line_name = "mdio_clk_en", + .lflags = 0, + /* dflags set in da850_evm_config_emac() */ + }, + { } +}; + static int __init da850_evm_config_emac(void) { void __iomem *cfg_chip3_base; @@ -1102,14 +1089,9 @@ static int __init da850_evm_config_emac(void) if (ret) pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__); - ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en"); - if (ret) { - pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN); - return ret; - } - - /* Enable/Disable MII MDIO clock */ - gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en); + da850_evm_emac_gpio_hogs[0].dflags = rmii_en ? GPIOD_OUT_HIGH + : GPIOD_OUT_LOW; + gpiod_add_hogs(da850_evm_emac_gpio_hogs); soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID; @@ -1494,12 +1476,12 @@ static __init void da850_evm_init(void) if (ret) pr_warn("%s: SATA registration failed: %d\n", __func__, ret); - da850_evm_setup_mac_addr(); - ret = da8xx_register_rproc(); if (ret) pr_warn("%s: dsp/rproc registration failed: %d\n", __func__, ret); + + regulator_has_full_constraints(); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -1521,7 +1503,7 @@ static void __init da850_evm_map_io(void) MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") .atag_offset = 0x100, .map_io = da850_evm_map_io, - .init_irq = cp_intc_init, + .init_irq = da850_init_irq, .init_time = da850_init_time, .init_machine = da850_evm_init, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index f7fa960c23e3..5113273fda69 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -121,6 +121,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = { GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + { } }, }; @@ -438,7 +439,7 @@ static __init void dm355_evm_init(void) MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") .atag_offset = 0x100, .map_io = dm355_evm_map_io, - .init_irq = davinci_irq_init, + .init_irq = dm355_init_irq, .init_time = dm355_init_time, .init_machine = dm355_evm_init, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 0fdf1d03eb11..b9e9950dd300 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -273,7 +273,7 @@ static __init void dm355_leopard_init(void) MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") .atag_offset = 0x100, .map_io = dm355_leopard_map_io, - .init_irq = davinci_irq_init, + .init_irq = dm355_init_irq, .init_time = dm355_init_time, .init_machine = dm355_leopard_init, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index e3b0b701e395..150a36f333df 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -18,7 +18,7 @@ #include <linux/i2c.h> #include <linux/io.h> #include <linux/clk.h> -#include <linux/platform_data/at24.h> +#include <linux/property.h> #include <linux/leds.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -225,18 +225,15 @@ static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = { .con_id = "mac-address", }; -static struct at24_platform_data eeprom_info = { - .byte_len = (256*1024) / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, - .setup = davinci_get_mac_addr, - .context = (void *)0x7f00, +static const struct property_entry eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 64), + { } }; static struct i2c_board_info i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &eeprom_info, + .properties = eeprom_properties, }, { I2C_BOARD_INFO("tlv320aic3x", 0x18), @@ -834,7 +831,7 @@ static __init void dm365_evm_init(void) MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM") .atag_offset = 0x100, .map_io = dm365_evm_map_io, - .init_irq = davinci_irq_init, + .init_irq = dm365_init_irq, .init_time = dm365_init_time, .init_machine = dm365_evm_init, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index b80c4ee76217..9d87d4e440ea 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -16,8 +16,8 @@ #include <linux/gpio/machine.h> #include <linux/i2c.h> #include <linux/platform_data/pcf857x.h> -#include <linux/platform_data/at24.h> #include <linux/platform_data/gpio-davinci.h> +#include <linux/property.h> #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> @@ -36,9 +36,10 @@ #include <asm/mach/arch.h> #include <mach/common.h> -#include <linux/platform_data/i2c-davinci.h> -#include <mach/serial.h> #include <mach/mux.h> +#include <mach/serial.h> + +#include <linux/platform_data/i2c-davinci.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mmc-davinci.h> #include <linux/platform_data/usb-davinci.h> @@ -46,6 +47,7 @@ #include <linux/platform_data/ti-aemif.h> #include "davinci.h" +#include "irqs.h" #define DM644X_EVM_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID (0x001378e2) @@ -532,12 +534,9 @@ static struct nvmem_cell_lookup dm644evm_nvmem_cell_lookup = { .con_id = "mac-address", }; -static struct at24_platform_data eeprom_info = { - .byte_len = (256*1024) / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, - .setup = davinci_get_mac_addr, - .context = (void *)0x7f00, +static const struct property_entry eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 64), + { } }; /* @@ -647,7 +646,7 @@ static struct i2c_board_info __initdata i2c_info[] = { }, { I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &eeprom_info, + .properties = eeprom_properties, }, { I2C_BOARD_INFO("tlv320aic33", 0x1b), @@ -664,6 +663,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = { GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + { } }, }; @@ -889,7 +889,7 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software <source@mvista.com> */ .atag_offset = 0x100, .map_io = davinci_evm_map_io, - .init_irq = davinci_irq_init, + .init_irq = dm644x_init_irq, .init_time = dm644x_init_time, .init_machine = davinci_evm_init, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 8d5be6dd2019..4600b617f9b4 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -22,7 +22,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/platform_data/at24.h> +#include <linux/property.h> #include <linux/platform_data/pcf857x.h> #include <linux/platform_data/ti-aemif.h> @@ -44,10 +44,10 @@ #include <asm/mach/arch.h> #include <mach/common.h> -#include <mach/irqs.h> #include <mach/serial.h> #include "davinci.h" +#include "irqs.h" #define NAND_BLOCK_SIZE SZ_128K @@ -364,12 +364,9 @@ static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = { .con_id = "mac-address", }; -static struct at24_platform_data eeprom_info = { - .byte_len = (256*1024) / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, - .setup = davinci_get_mac_addr, - .context = (void *)0x7f00, +static const struct property_entry eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 64), + { } }; #endif @@ -440,7 +437,7 @@ static void evm_init_cpld(void) static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &eeprom_info, + .properties = eeprom_properties, }, { I2C_BOARD_INFO("pcf8574a", 0x38), @@ -863,7 +860,7 @@ static __init void evm_init(void) MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") .atag_offset = 0x100, .map_io = davinci_map_io, - .init_irq = davinci_irq_init, + .init_irq = dm646x_init_irq, .init_time = dm646x_evm_init_time, .init_machine = evm_init, .init_late = davinci_init_late, @@ -873,7 +870,7 @@ MACHINE_END MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") .atag_offset = 0x100, .map_io = davinci_map_io, - .init_irq = davinci_irq_init, + .init_irq = dm646x_init_irq, .init_time = dm6467t_evm_init_time, .init_machine = evm_init, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 8df16e81b69e..dfce421c0579 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -14,11 +14,13 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/mtd/partitions.h> +#include <linux/notifier.h> +#include <linux/nvmem-consumer.h> #include <linux/nvmem-provider.h> #include <linux/regulator/machine.h> #include <linux/i2c.h> -#include <linux/platform_data/at24.h> #include <linux/etherdevice.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> @@ -27,7 +29,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/common.h> -#include "cp_intc.h" #include <mach/da8xx.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> @@ -117,11 +118,15 @@ static void mityomapl138_cpufreq_init(const char *partnum) static void mityomapl138_cpufreq_init(const char *partnum) { } #endif -static void read_factory_config(struct nvmem_device *nvmem, void *context) +static int read_factory_config(struct notifier_block *nb, + unsigned long event, void *data) { int ret; const char *partnum = NULL; - struct davinci_soc_info *soc_info = &davinci_soc_info; + struct nvmem_device *nvmem = data; + + if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0) + return NOTIFY_DONE; if (!IS_BUILTIN(CONFIG_NVMEM)) { pr_warn("Factory Config not available without CONFIG_NVMEM\n"); @@ -147,21 +152,20 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context) goto bad_config; } - pr_info("Found MAC = %pM\n", factory_config.mac); - if (is_valid_ether_addr(factory_config.mac)) - memcpy(soc_info->emac_pdata->mac_addr, - factory_config.mac, ETH_ALEN); - else - pr_warn("Invalid MAC found in factory config block\n"); - partnum = factory_config.partnum; pr_info("Part Number = %s\n", partnum); bad_config: /* default maximum speed is valid for all platforms */ mityomapl138_cpufreq_init(partnum); + + return NOTIFY_STOP; } +static struct notifier_block mityomapl138_nvmem_notifier = { + .notifier_call = read_factory_config, +}; + /* * We don't define a cell for factory config as it will be accessed from the * board file using the nvmem notifier chain. @@ -187,12 +191,10 @@ static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = { .con_id = "mac-address", }; -static struct at24_platform_data mityomapl138_fd_chip = { - .byte_len = 256, - .page_size = 8, - .flags = AT24_FLAG_READONLY | AT24_FLAG_IRUGO, - .setup = read_factory_config, - .context = NULL, +static const struct property_entry mityomapl138_fd_chip_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 8), + PROPERTY_ENTRY_BOOL("read-only"), + { } }; static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = { @@ -321,7 +323,7 @@ static struct i2c_board_info __initdata mityomap_tps65023_info[] = { }, { I2C_BOARD_INFO("24c02", 0x50), - .platform_data = &mityomapl138_fd_chip, + .properties = mityomapl138_fd_chip_properties, }, }; @@ -569,6 +571,7 @@ static void __init mityomapl138_init(void) davinci_serial_init(da8xx_serial_device); + nvmem_register_notifier(&mityomapl138_nvmem_notifier); nvmem_add_cell_table(&mityomapl138_nvmem_cell_table); nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1); @@ -624,7 +627,7 @@ static void __init mityomapl138_map_io(void) MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808") .atag_offset = 0x100, .map_io = mityomapl138_map_io, - .init_irq = cp_intc_init, + .init_irq = da850_init_irq, .init_time = da850_init_time, .init_machine = mityomapl138_init, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index efdaa27241c5..ce99f782811a 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -231,7 +231,7 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2") /* Maintainer: Neuros Technologies <neuros@groups.google.com> */ .atag_offset = 0x100, .map_io = davinci_ntosd2_map_io, - .init_irq = davinci_irq_init, + .init_irq = dm644x_init_irq, .init_time = dm644x_init_time, .init_machine = davinci_ntosd2_init, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 94c4f126ef86..5390a8630cf0 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -21,13 +21,13 @@ #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> #include <linux/platform_data/ti-aemif.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/common.h> -#include "cp_intc.h" #include <mach/da8xx.h> #include <mach/mux.h> @@ -294,66 +294,63 @@ static int omapl138_hawk_register_aemif(void) return platform_device_register(&omapl138_hawk_aemif_device); } -static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id); -static da8xx_ocic_handler_t hawk_usb_ocic_handler; - static const short da850_hawk_usb11_pins[] = { DA850_GPIO2_4, DA850_GPIO6_13, -1 }; -static int hawk_usb_set_power(unsigned port, int on) -{ - gpio_set_value(DA850_USB1_VBUS_PIN, on); - return 0; -} +static struct regulator_consumer_supply hawk_usb_supplies[] = { + REGULATOR_SUPPLY("vbus", NULL), +}; -static int hawk_usb_get_power(unsigned port) -{ - return gpio_get_value(DA850_USB1_VBUS_PIN); -} +static struct regulator_init_data hawk_usb_vbus_data = { + .consumer_supplies = hawk_usb_supplies, + .num_consumer_supplies = ARRAY_SIZE(hawk_usb_supplies), + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; -static int hawk_usb_get_oci(unsigned port) -{ - return !gpio_get_value(DA850_USB1_OC_PIN); -} +static struct fixed_voltage_config hawk_usb_vbus = { + .supply_name = "vbus", + .microvolts = 3300000, + .init_data = &hawk_usb_vbus_data, +}; -static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler) -{ - int irq = gpio_to_irq(DA850_USB1_OC_PIN); - int error = 0; - - if (handler != NULL) { - hawk_usb_ocic_handler = handler; - - error = request_irq(irq, omapl138_hawk_usb_ocic_irq, - IRQF_TRIGGER_RISING | - IRQF_TRIGGER_FALLING, - "OHCI over-current indicator", NULL); - if (error) - pr_err("%s: could not request IRQ to watch " - "over-current indicator changes\n", __func__); - } else { - free_irq(irq, NULL); - } - return error; -} +static struct platform_device hawk_usb_vbus_device = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &hawk_usb_vbus, + }, +}; + +static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = { + .dev_id = "ohci-da8xx", + .table = { + GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0), + { } + }, +}; + +static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0), + { } + }, +}; + +static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = { + &hawk_usb_oc_gpio_lookup, + &hawk_usb_vbus_gpio_lookup, +}; static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = { - .set_power = hawk_usb_set_power, - .get_power = hawk_usb_get_power, - .get_oci = hawk_usb_get_oci, - .ocic_notify = hawk_usb_ocic_notify, /* TPS2087 switch @ 5V */ .potpgt = (3 + 1) / 2, /* 3 ms max */ }; -static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id) -{ - hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1); - return IRQ_HANDLED; -} - static __init void omapl138_hawk_usb_init(void) { int ret; @@ -369,39 +366,25 @@ static __init void omapl138_hawk_usb_init(void) pr_warn("%s: USB PHY CLK registration failed: %d\n", __func__, ret); + gpiod_add_lookup_tables(hawk_usb_gpio_lookups, + ARRAY_SIZE(hawk_usb_gpio_lookups)); + ret = da8xx_register_usb_phy(); if (ret) pr_warn("%s: USB PHY registration failed: %d\n", __func__, ret); - ret = gpio_request_one(DA850_USB1_VBUS_PIN, - GPIOF_DIR_OUT, "USB1 VBUS"); - if (ret < 0) { - pr_err("%s: failed to request GPIO for USB 1.1 port " - "power control: %d\n", __func__, ret); + ret = platform_device_register(&hawk_usb_vbus_device); + if (ret) { + pr_warn("%s: Unable to register the vbus supply\n", __func__); return; } - ret = gpio_request_one(DA850_USB1_OC_PIN, - GPIOF_DIR_IN, "USB1 OC"); - if (ret < 0) { - pr_err("%s: failed to request GPIO for USB 1.1 port " - "over-current indicator: %d\n", __func__, ret); - goto usb11_setup_oc_fail; - } - ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata); - if (ret) { + if (ret) pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret); - goto usb11_setup_fail; - } return; - -usb11_setup_fail: - gpio_free(DA850_USB1_OC_PIN); -usb11_setup_oc_fail: - gpio_free(DA850_USB1_VBUS_PIN); } static __init void omapl138_hawk_init(void) @@ -462,7 +445,7 @@ static void __init omapl138_hawk_map_io(void) MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard") .atag_offset = 0x100, .map_io = omapl138_hawk_map_io, - .init_irq = cp_intc_init, + .init_irq = da850_init_irq, .init_time = da850_init_time, .init_machine = omapl138_hawk_init, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 792bb84d5011..79b47958e992 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Lyrtech SFFSDR board support. * @@ -7,26 +8,12 @@ * Based on DV-EVM platform, original copyright follows: * * Copyright (C) 2007 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/platform_data/at24.h> +#include <linux/property.h> #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> @@ -92,16 +79,15 @@ static struct platform_device davinci_sffsdr_nandflash_device = { .resource = davinci_sffsdr_nandflash_resource, }; -static struct at24_platform_data eeprom_info = { - .byte_len = (64*1024) / 8, - .page_size = 32, - .flags = AT24_FLAG_ADDR16, +static const struct property_entry eeprom_properties[] = { + PROPERTY_ENTRY_U32("pagesize", 32), + { } }; static struct i2c_board_info __initdata i2c_info[] = { { - I2C_BOARD_INFO("24lc64", 0x50), - .platform_data = &eeprom_info, + I2C_BOARD_INFO("24c64", 0x50), + .properties = eeprom_properties, }, /* Other I2C devices: * MSP430, addr 0x23 (not used) @@ -153,7 +139,7 @@ static __init void davinci_sffsdr_init(void) MACHINE_START(SFFSDR, "Lyrtech SFFSDR") .atag_offset = 0x100, .map_io = davinci_sffsdr_map_io, - .init_irq = davinci_irq_init, + .init_irq = dm644x_init_irq, .init_time = dm644x_init_time, .init_machine = davinci_sffsdr_init, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 307383472400..54f5663b08ee 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * TI DaVinci clock definitions * * Copyright (C) 2006-2007 Texas Instruments. * Copyright (C) 2008-2009 Deep Root Systems, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_DAVINCI_CLOCK_H diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index e1d0f0d841ff..ae61d19f9b3a 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -23,24 +23,6 @@ struct davinci_soc_info davinci_soc_info; EXPORT_SYMBOL(davinci_soc_info); -void __iomem *davinci_intc_base; -int davinci_intc_type; - -void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context) -{ - char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; - off_t offset = (off_t)context; - - if (!IS_BUILTIN(CONFIG_NVMEM)) { - pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n"); - return; - } - - /* Read MAC addr from EEPROM */ - if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) - pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); -} - static int __init davinci_init_id(struct davinci_soc_info *soc_info) { int i; diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c deleted file mode 100644 index 94085d21018e..000000000000 --- a/arch/arm/mach-davinci/cp_intc.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * TI Common Platform Interrupt Controller (cp_intc) driver - * - * Author: Steve Chen <schen@mvista.com> - * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <linux/export.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/irqchip.h> -#include <linux/irqdomain.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <mach/common.h> -#include "cp_intc.h" - -static inline unsigned int cp_intc_read(unsigned offset) -{ - return __raw_readl(davinci_intc_base + offset); -} - -static inline void cp_intc_write(unsigned long value, unsigned offset) -{ - __raw_writel(value, davinci_intc_base + offset); -} - -static void cp_intc_ack_irq(struct irq_data *d) -{ - cp_intc_write(d->hwirq, CP_INTC_SYS_STAT_IDX_CLR); -} - -/* Disable interrupt */ -static void cp_intc_mask_irq(struct irq_data *d) -{ - /* XXX don't know why we need to disable nIRQ here... */ - cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR); - cp_intc_write(d->hwirq, CP_INTC_SYS_ENABLE_IDX_CLR); - cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); -} - -/* Enable interrupt */ -static void cp_intc_unmask_irq(struct irq_data *d) -{ - cp_intc_write(d->hwirq, CP_INTC_SYS_ENABLE_IDX_SET); -} - -static int cp_intc_set_irq_type(struct irq_data *d, unsigned int flow_type) -{ - unsigned reg = BIT_WORD(d->hwirq); - unsigned mask = BIT_MASK(d->hwirq); - unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg)); - unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg)); - - switch (flow_type) { - case IRQ_TYPE_EDGE_RISING: - polarity |= mask; - type |= mask; - break; - case IRQ_TYPE_EDGE_FALLING: - polarity &= ~mask; - type |= mask; - break; - case IRQ_TYPE_LEVEL_HIGH: - polarity |= mask; - type &= ~mask; - break; - case IRQ_TYPE_LEVEL_LOW: - polarity &= ~mask; - type &= ~mask; - break; - default: - return -EINVAL; - } - - cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg)); - cp_intc_write(type, CP_INTC_SYS_TYPE(reg)); - - return 0; -} - -static struct irq_chip cp_intc_irq_chip = { - .name = "cp_intc", - .irq_ack = cp_intc_ack_irq, - .irq_mask = cp_intc_mask_irq, - .irq_unmask = cp_intc_unmask_irq, - .irq_set_type = cp_intc_set_irq_type, - .flags = IRQCHIP_SKIP_SET_WAKE, -}; - -static struct irq_domain *cp_intc_domain; - -static int cp_intc_host_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - pr_debug("cp_intc_host_map(%d, 0x%lx)\n", virq, hw); - - irq_set_chip(virq, &cp_intc_irq_chip); - irq_set_probe(virq); - irq_set_handler(virq, handle_edge_irq); - return 0; -} - -static const struct irq_domain_ops cp_intc_host_ops = { - .map = cp_intc_host_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -int __init cp_intc_of_init(struct device_node *node, struct device_node *parent) -{ - u32 num_irq = davinci_soc_info.intc_irq_num; - u8 *irq_prio = davinci_soc_info.intc_irq_prios; - u32 *host_map = davinci_soc_info.intc_host_map; - unsigned num_reg = BITS_TO_LONGS(num_irq); - int i, irq_base; - - davinci_intc_type = DAVINCI_INTC_TYPE_CP_INTC; - if (node) { - davinci_intc_base = of_iomap(node, 0); - if (of_property_read_u32(node, "ti,intc-size", &num_irq)) - pr_warn("unable to get intc-size, default to %d\n", - num_irq); - } else { - davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K); - } - if (WARN_ON(!davinci_intc_base)) - return -EINVAL; - - cp_intc_write(0, CP_INTC_GLOBAL_ENABLE); - - /* Disable all host interrupts */ - cp_intc_write(0, CP_INTC_HOST_ENABLE(0)); - - /* Disable system interrupts */ - for (i = 0; i < num_reg; i++) - cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i)); - - /* Set to normal mode, no nesting, no priority hold */ - cp_intc_write(0, CP_INTC_CTRL); - cp_intc_write(0, CP_INTC_HOST_CTRL); - - /* Clear system interrupt status */ - for (i = 0; i < num_reg; i++) - cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i)); - - /* Enable nIRQ (what about nFIQ?) */ - cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); - - /* - * Priority is determined by host channel: lower channel number has - * higher priority i.e. channel 0 has highest priority and channel 31 - * had the lowest priority. - */ - num_reg = (num_irq + 3) >> 2; /* 4 channels per register */ - if (irq_prio) { - unsigned j, k; - u32 val; - - for (k = i = 0; i < num_reg; i++) { - for (val = j = 0; j < 4; j++, k++) { - val >>= 8; - if (k < num_irq) - val |= irq_prio[k] << 24; - } - - cp_intc_write(val, CP_INTC_CHAN_MAP(i)); - } - } else { - /* - * Default everything to channel 15 if priority not specified. - * Note that channel 0-1 are mapped to nFIQ and channels 2-31 - * are mapped to nIRQ. - */ - for (i = 0; i < num_reg; i++) - cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i)); - } - - if (host_map) - for (i = 0; host_map[i] != -1; i++) - cp_intc_write(host_map[i], CP_INTC_HOST_MAP(i)); - - irq_base = irq_alloc_descs(-1, 0, num_irq, 0); - if (irq_base < 0) { - pr_warn("Couldn't allocate IRQ numbers\n"); - irq_base = 0; - } - - /* create a legacy host */ - cp_intc_domain = irq_domain_add_legacy(node, num_irq, - irq_base, 0, &cp_intc_host_ops, NULL); - - if (!cp_intc_domain) { - pr_err("cp_intc: failed to allocate irq host!\n"); - return -EINVAL; - } - - /* Enable global interrupt */ - cp_intc_write(1, CP_INTC_GLOBAL_ENABLE); - - return 0; -} - -void __init cp_intc_init(void) -{ - cp_intc_of_init(NULL, NULL); -} - -IRQCHIP_DECLARE(cp_intc, "ti,cp-intc", cp_intc_of_init); diff --git a/arch/arm/mach-davinci/cp_intc.h b/arch/arm/mach-davinci/cp_intc.h deleted file mode 100644 index 827bbe9baed4..000000000000 --- a/arch/arm/mach-davinci/cp_intc.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * TI Common Platform Interrupt Controller (cp_intc) definitions - * - * Author: Steve Chen <schen@mvista.com> - * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ -#ifndef __ASM_HARDWARE_CP_INTC_H -#define __ASM_HARDWARE_CP_INTC_H - -#define CP_INTC_REV 0x00 -#define CP_INTC_CTRL 0x04 -#define CP_INTC_HOST_CTRL 0x0C -#define CP_INTC_GLOBAL_ENABLE 0x10 -#define CP_INTC_GLOBAL_NESTING_LEVEL 0x1C -#define CP_INTC_SYS_STAT_IDX_SET 0x20 -#define CP_INTC_SYS_STAT_IDX_CLR 0x24 -#define CP_INTC_SYS_ENABLE_IDX_SET 0x28 -#define CP_INTC_SYS_ENABLE_IDX_CLR 0x2C -#define CP_INTC_GLOBAL_WAKEUP_ENABLE 0x30 -#define CP_INTC_HOST_ENABLE_IDX_SET 0x34 -#define CP_INTC_HOST_ENABLE_IDX_CLR 0x38 -#define CP_INTC_PACING_PRESCALE 0x40 -#define CP_INTC_VECTOR_BASE 0x50 -#define CP_INTC_VECTOR_SIZE 0x54 -#define CP_INTC_VECTOR_NULL 0x58 -#define CP_INTC_PRIO_IDX 0x80 -#define CP_INTC_PRIO_VECTOR 0x84 -#define CP_INTC_SECURE_ENABLE 0x90 -#define CP_INTC_SECURE_PRIO_IDX 0x94 -#define CP_INTC_PACING_PARAM(n) (0x0100 + (n << 4)) -#define CP_INTC_PACING_DEC(n) (0x0104 + (n << 4)) -#define CP_INTC_PACING_MAP(n) (0x0108 + (n << 4)) -#define CP_INTC_SYS_RAW_STAT(n) (0x0200 + (n << 2)) -#define CP_INTC_SYS_STAT_CLR(n) (0x0280 + (n << 2)) -#define CP_INTC_SYS_ENABLE_SET(n) (0x0300 + (n << 2)) -#define CP_INTC_SYS_ENABLE_CLR(n) (0x0380 + (n << 2)) -#define CP_INTC_CHAN_MAP(n) (0x0400 + (n << 2)) -#define CP_INTC_HOST_MAP(n) (0x0800 + (n << 2)) -#define CP_INTC_HOST_PRIO_IDX(n) (0x0900 + (n << 2)) -#define CP_INTC_SYS_POLARITY(n) (0x0D00 + (n << 2)) -#define CP_INTC_SYS_TYPE(n) (0x0D80 + (n << 2)) -#define CP_INTC_WAKEUP_ENABLE(n) (0x0E00 + (n << 2)) -#define CP_INTC_DEBUG_SELECT(n) (0x0F00 + (n << 2)) -#define CP_INTC_SYS_SECURE_ENABLE(n) (0x1000 + (n << 2)) -#define CP_INTC_HOST_NESTING_LEVEL(n) (0x1100 + (n << 2)) -#define CP_INTC_HOST_ENABLE(n) (0x1500 + (n << 2)) -#define CP_INTC_HOST_PRIO_VECTOR(n) (0x1600 + (n << 2)) -#define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2)) - -void cp_intc_init(void); -int cp_intc_of_init(struct device_node *, struct device_node *); - -#endif /* __ASM_HARDWARE_CP_INTC_H */ diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index 1b8f08532455..b795f671bd03 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * CPU idle for DaVinci SoCs * @@ -5,10 +6,6 @@ * * Derived from Marvell Kirkwood CPU idle code * (arch/arm/mach-kirkwood/cpuidle.c) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 2cc9fe4c3a91..e6b8ffd934a1 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -12,6 +12,8 @@ #include <linux/clk/davinci.h> #include <linux/gpio.h> #include <linux/init.h> +#include <linux/io.h> +#include <linux/irqchip/irq-davinci-cp-intc.h> #include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> @@ -19,9 +21,9 @@ #include <mach/common.h> #include <mach/cputype.h> #include <mach/da8xx.h> -#include <mach/irqs.h> #include <mach/time.h> +#include "irqs.h" #include "mux.h" /* Offsets of the 8 compare registers on the da830 */ @@ -623,101 +625,6 @@ const short da830_eqep1_pins[] __initconst = { -1 }; -/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = { - [IRQ_DA8XX_COMMTX] = 7, - [IRQ_DA8XX_COMMRX] = 7, - [IRQ_DA8XX_NINT] = 7, - [IRQ_DA8XX_EVTOUT0] = 7, - [IRQ_DA8XX_EVTOUT1] = 7, - [IRQ_DA8XX_EVTOUT2] = 7, - [IRQ_DA8XX_EVTOUT3] = 7, - [IRQ_DA8XX_EVTOUT4] = 7, - [IRQ_DA8XX_EVTOUT5] = 7, - [IRQ_DA8XX_EVTOUT6] = 7, - [IRQ_DA8XX_EVTOUT7] = 7, - [IRQ_DA8XX_CCINT0] = 7, - [IRQ_DA8XX_CCERRINT] = 7, - [IRQ_DA8XX_TCERRINT0] = 7, - [IRQ_DA8XX_AEMIFINT] = 7, - [IRQ_DA8XX_I2CINT0] = 7, - [IRQ_DA8XX_MMCSDINT0] = 7, - [IRQ_DA8XX_MMCSDINT1] = 7, - [IRQ_DA8XX_ALLINT0] = 7, - [IRQ_DA8XX_RTC] = 7, - [IRQ_DA8XX_SPINT0] = 7, - [IRQ_DA8XX_TINT12_0] = 7, - [IRQ_DA8XX_TINT34_0] = 7, - [IRQ_DA8XX_TINT12_1] = 7, - [IRQ_DA8XX_TINT34_1] = 7, - [IRQ_DA8XX_UARTINT0] = 7, - [IRQ_DA8XX_KEYMGRINT] = 7, - [IRQ_DA830_MPUERR] = 7, - [IRQ_DA8XX_CHIPINT0] = 7, - [IRQ_DA8XX_CHIPINT1] = 7, - [IRQ_DA8XX_CHIPINT2] = 7, - [IRQ_DA8XX_CHIPINT3] = 7, - [IRQ_DA8XX_TCERRINT1] = 7, - [IRQ_DA8XX_C0_RX_THRESH_PULSE] = 7, - [IRQ_DA8XX_C0_RX_PULSE] = 7, - [IRQ_DA8XX_C0_TX_PULSE] = 7, - [IRQ_DA8XX_C0_MISC_PULSE] = 7, - [IRQ_DA8XX_C1_RX_THRESH_PULSE] = 7, - [IRQ_DA8XX_C1_RX_PULSE] = 7, - [IRQ_DA8XX_C1_TX_PULSE] = 7, - [IRQ_DA8XX_C1_MISC_PULSE] = 7, - [IRQ_DA8XX_MEMERR] = 7, - [IRQ_DA8XX_GPIO0] = 7, - [IRQ_DA8XX_GPIO1] = 7, - [IRQ_DA8XX_GPIO2] = 7, - [IRQ_DA8XX_GPIO3] = 7, - [IRQ_DA8XX_GPIO4] = 7, - [IRQ_DA8XX_GPIO5] = 7, - [IRQ_DA8XX_GPIO6] = 7, - [IRQ_DA8XX_GPIO7] = 7, - [IRQ_DA8XX_GPIO8] = 7, - [IRQ_DA8XX_I2CINT1] = 7, - [IRQ_DA8XX_LCDINT] = 7, - [IRQ_DA8XX_UARTINT1] = 7, - [IRQ_DA8XX_MCASPINT] = 7, - [IRQ_DA8XX_ALLINT1] = 7, - [IRQ_DA8XX_SPINT1] = 7, - [IRQ_DA8XX_UHPI_INT1] = 7, - [IRQ_DA8XX_USB_INT] = 7, - [IRQ_DA8XX_IRQN] = 7, - [IRQ_DA8XX_RWAKEUP] = 7, - [IRQ_DA8XX_UARTINT2] = 7, - [IRQ_DA8XX_DFTSSINT] = 7, - [IRQ_DA8XX_EHRPWM0] = 7, - [IRQ_DA8XX_EHRPWM0TZ] = 7, - [IRQ_DA8XX_EHRPWM1] = 7, - [IRQ_DA8XX_EHRPWM1TZ] = 7, - [IRQ_DA830_EHRPWM2] = 7, - [IRQ_DA830_EHRPWM2TZ] = 7, - [IRQ_DA8XX_ECAP0] = 7, - [IRQ_DA8XX_ECAP1] = 7, - [IRQ_DA8XX_ECAP2] = 7, - [IRQ_DA830_EQEP0] = 7, - [IRQ_DA830_EQEP1] = 7, - [IRQ_DA830_T12CMPINT0_0] = 7, - [IRQ_DA830_T12CMPINT1_0] = 7, - [IRQ_DA830_T12CMPINT2_0] = 7, - [IRQ_DA830_T12CMPINT3_0] = 7, - [IRQ_DA830_T12CMPINT4_0] = 7, - [IRQ_DA830_T12CMPINT5_0] = 7, - [IRQ_DA830_T12CMPINT6_0] = 7, - [IRQ_DA830_T12CMPINT7_0] = 7, - [IRQ_DA830_T12CMPINT0_1] = 7, - [IRQ_DA830_T12CMPINT1_1] = 7, - [IRQ_DA830_T12CMPINT2_1] = 7, - [IRQ_DA830_T12CMPINT3_1] = 7, - [IRQ_DA830_T12CMPINT4_1] = 7, - [IRQ_DA830_T12CMPINT5_1] = 7, - [IRQ_DA830_T12CMPINT6_1] = 7, - [IRQ_DA830_T12CMPINT7_1] = 7, - [IRQ_DA8XX_ARMCLKSTOPREQ] = 7, -}; - static struct map_desc da830_io_desc[] = { { .virtual = IO_VIRT, @@ -772,17 +679,17 @@ int __init da830_register_gpio(void) static struct davinci_timer_instance da830_timer_instance[2] = { { .base = DA8XX_TIMER64P0_BASE, - .bottom_irq = IRQ_DA8XX_TINT12_0, - .top_irq = IRQ_DA8XX_TINT34_0, + .bottom_irq = DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT12_0), + .top_irq = DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT34_0), .cmp_off = DA830_CMP12_0, - .cmp_irq = IRQ_DA830_T12CMPINT0_0, + .cmp_irq = DAVINCI_INTC_IRQ(IRQ_DA830_T12CMPINT0_0), }, { .base = DA8XX_TIMER64P1_BASE, - .bottom_irq = IRQ_DA8XX_TINT12_1, - .top_irq = IRQ_DA8XX_TINT34_1, + .bottom_irq = DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT12_1), + .top_irq = DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT34_1), .cmp_off = DA830_CMP12_0, - .cmp_irq = IRQ_DA830_T12CMPINT0_1, + .cmp_irq = DAVINCI_INTC_IRQ(IRQ_DA830_T12CMPINT0_1), }, }; @@ -806,10 +713,6 @@ static const struct davinci_soc_info davinci_soc_info_da830 = { .pinmux_base = DA8XX_SYSCFG0_BASE + 0x120, .pinmux_pins = da830_pins, .pinmux_pins_num = ARRAY_SIZE(da830_pins), - .intc_base = DA8XX_CP_INTC_BASE, - .intc_type = DAVINCI_INTC_TYPE_CP_INTC, - .intc_irq_prios = da830_default_priorities, - .intc_irq_num = DA830_N_CP_INTC_IRQ, .timer_info = &da830_timer_info, .emac_pdata = &da8xx_emac_pdata, }; @@ -822,6 +725,20 @@ void __init da830_init(void) WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module"); } +static const struct davinci_cp_intc_config da830_cp_intc_config = { + .reg = { + .start = DA8XX_CP_INTC_BASE, + .end = DA8XX_CP_INTC_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, + .num_irqs = DA830_N_CP_INTC_IRQ, +}; + +void __init da830_init_irq(void) +{ + davinci_cp_intc_init(&da830_cp_intc_config); +} + void __init da830_init_time(void) { void __iomem *pll; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index e7b78df2bfef..77bc64d6e39b 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -18,9 +18,12 @@ #include <linux/cpufreq.h> #include <linux/gpio.h> #include <linux/init.h> +#include <linux/io.h> +#include <linux/irqchip/irq-davinci-cp-intc.h> #include <linux/mfd/da8xx-cfgchip.h> #include <linux/platform_data/clk-da8xx-cfgchip.h> #include <linux/platform_data/clk-davinci-pll.h> +#include <linux/platform_data/davinci-cpufreq.h> #include <linux/platform_data/gpio-davinci.h> #include <linux/platform_device.h> #include <linux/regmap.h> @@ -29,13 +32,12 @@ #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/cpufreq.h> #include <mach/cputype.h> #include <mach/da8xx.h> -#include <mach/irqs.h> #include <mach/pm.h> #include <mach/time.h> +#include "irqs.h" #include "mux.h" #define DA850_PLL1_BASE 0x01e1a000 @@ -298,111 +300,6 @@ const short da850_vpif_display_pins[] __initconst = { -1 }; -/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { - [IRQ_DA8XX_COMMTX] = 7, - [IRQ_DA8XX_COMMRX] = 7, - [IRQ_DA8XX_NINT] = 7, - [IRQ_DA8XX_EVTOUT0] = 7, - [IRQ_DA8XX_EVTOUT1] = 7, - [IRQ_DA8XX_EVTOUT2] = 7, - [IRQ_DA8XX_EVTOUT3] = 7, - [IRQ_DA8XX_EVTOUT4] = 7, - [IRQ_DA8XX_EVTOUT5] = 7, - [IRQ_DA8XX_EVTOUT6] = 7, - [IRQ_DA8XX_EVTOUT7] = 7, - [IRQ_DA8XX_CCINT0] = 7, - [IRQ_DA8XX_CCERRINT] = 7, - [IRQ_DA8XX_TCERRINT0] = 7, - [IRQ_DA8XX_AEMIFINT] = 7, - [IRQ_DA8XX_I2CINT0] = 7, - [IRQ_DA8XX_MMCSDINT0] = 7, - [IRQ_DA8XX_MMCSDINT1] = 7, - [IRQ_DA8XX_ALLINT0] = 7, - [IRQ_DA8XX_RTC] = 7, - [IRQ_DA8XX_SPINT0] = 7, - [IRQ_DA8XX_TINT12_0] = 7, - [IRQ_DA8XX_TINT34_0] = 7, - [IRQ_DA8XX_TINT12_1] = 7, - [IRQ_DA8XX_TINT34_1] = 7, - [IRQ_DA8XX_UARTINT0] = 7, - [IRQ_DA8XX_KEYMGRINT] = 7, - [IRQ_DA850_MPUADDRERR0] = 7, - [IRQ_DA8XX_CHIPINT0] = 7, - [IRQ_DA8XX_CHIPINT1] = 7, - [IRQ_DA8XX_CHIPINT2] = 7, - [IRQ_DA8XX_CHIPINT3] = 7, - [IRQ_DA8XX_TCERRINT1] = 7, - [IRQ_DA8XX_C0_RX_THRESH_PULSE] = 7, - [IRQ_DA8XX_C0_RX_PULSE] = 7, - [IRQ_DA8XX_C0_TX_PULSE] = 7, - [IRQ_DA8XX_C0_MISC_PULSE] = 7, - [IRQ_DA8XX_C1_RX_THRESH_PULSE] = 7, - [IRQ_DA8XX_C1_RX_PULSE] = 7, - [IRQ_DA8XX_C1_TX_PULSE] = 7, - [IRQ_DA8XX_C1_MISC_PULSE] = 7, - [IRQ_DA8XX_MEMERR] = 7, - [IRQ_DA8XX_GPIO0] = 7, - [IRQ_DA8XX_GPIO1] = 7, - [IRQ_DA8XX_GPIO2] = 7, - [IRQ_DA8XX_GPIO3] = 7, - [IRQ_DA8XX_GPIO4] = 7, - [IRQ_DA8XX_GPIO5] = 7, - [IRQ_DA8XX_GPIO6] = 7, - [IRQ_DA8XX_GPIO7] = 7, - [IRQ_DA8XX_GPIO8] = 7, - [IRQ_DA8XX_I2CINT1] = 7, - [IRQ_DA8XX_LCDINT] = 7, - [IRQ_DA8XX_UARTINT1] = 7, - [IRQ_DA8XX_MCASPINT] = 7, - [IRQ_DA8XX_ALLINT1] = 7, - [IRQ_DA8XX_SPINT1] = 7, - [IRQ_DA8XX_UHPI_INT1] = 7, - [IRQ_DA8XX_USB_INT] = 7, - [IRQ_DA8XX_IRQN] = 7, - [IRQ_DA8XX_RWAKEUP] = 7, - [IRQ_DA8XX_UARTINT2] = 7, - [IRQ_DA8XX_DFTSSINT] = 7, - [IRQ_DA8XX_EHRPWM0] = 7, - [IRQ_DA8XX_EHRPWM0TZ] = 7, - [IRQ_DA8XX_EHRPWM1] = 7, - [IRQ_DA8XX_EHRPWM1TZ] = 7, - [IRQ_DA850_SATAINT] = 7, - [IRQ_DA850_TINTALL_2] = 7, - [IRQ_DA8XX_ECAP0] = 7, - [IRQ_DA8XX_ECAP1] = 7, - [IRQ_DA8XX_ECAP2] = 7, - [IRQ_DA850_MMCSDINT0_1] = 7, - [IRQ_DA850_MMCSDINT1_1] = 7, - [IRQ_DA850_T12CMPINT0_2] = 7, - [IRQ_DA850_T12CMPINT1_2] = 7, - [IRQ_DA850_T12CMPINT2_2] = 7, - [IRQ_DA850_T12CMPINT3_2] = 7, - [IRQ_DA850_T12CMPINT4_2] = 7, - [IRQ_DA850_T12CMPINT5_2] = 7, - [IRQ_DA850_T12CMPINT6_2] = 7, - [IRQ_DA850_T12CMPINT7_2] = 7, - [IRQ_DA850_T12CMPINT0_3] = 7, - [IRQ_DA850_T12CMPINT1_3] = 7, - [IRQ_DA850_T12CMPINT2_3] = 7, - [IRQ_DA850_T12CMPINT3_3] = 7, - [IRQ_DA850_T12CMPINT4_3] = 7, - [IRQ_DA850_T12CMPINT5_3] = 7, - [IRQ_DA850_T12CMPINT6_3] = 7, - [IRQ_DA850_T12CMPINT7_3] = 7, - [IRQ_DA850_RPIINT] = 7, - [IRQ_DA850_VPIFINT] = 7, - [IRQ_DA850_CCINT1] = 7, - [IRQ_DA850_CCERRINT1] = 7, - [IRQ_DA850_TCERRINT2] = 7, - [IRQ_DA850_TINTALL_3] = 7, - [IRQ_DA850_MCBSP0RINT] = 7, - [IRQ_DA850_MCBSP0XINT] = 7, - [IRQ_DA850_MCBSP1RINT] = 7, - [IRQ_DA850_MCBSP1XINT] = 7, - [IRQ_DA8XX_ARMCLKSTOPREQ] = 7, -}; - static struct map_desc da850_io_desc[] = { { .virtual = IO_VIRT, @@ -439,23 +336,23 @@ static struct davinci_id da850_ids[] = { static struct davinci_timer_instance da850_timer_instance[4] = { { .base = DA8XX_TIMER64P0_BASE, - .bottom_irq = IRQ_DA8XX_TINT12_0, - .top_irq = IRQ_DA8XX_TINT34_0, + .bottom_irq = DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT12_0), + .top_irq = DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT34_0), }, { .base = DA8XX_TIMER64P1_BASE, - .bottom_irq = IRQ_DA8XX_TINT12_1, - .top_irq = IRQ_DA8XX_TINT34_1, + .bottom_irq = DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT12_1), + .top_irq = DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT34_1), }, { .base = DA850_TIMER64P2_BASE, - .bottom_irq = IRQ_DA850_TINT12_2, - .top_irq = IRQ_DA850_TINT34_2, + .bottom_irq = DAVINCI_INTC_IRQ(IRQ_DA850_TINT12_2), + .top_irq = DAVINCI_INTC_IRQ(IRQ_DA850_TINT34_2), }, { .base = DA850_TIMER64P3_BASE, - .bottom_irq = IRQ_DA850_TINT12_3, - .top_irq = IRQ_DA850_TINT34_3, + .bottom_irq = DAVINCI_INTC_IRQ(IRQ_DA850_TINT12_3), + .top_irq = DAVINCI_INTC_IRQ(IRQ_DA850_TINT34_3), }, }; @@ -658,8 +555,8 @@ static struct platform_device da850_vpif_dev = { static struct resource da850_vpif_display_resource[] = { { - .start = IRQ_DA850_VPIFINT, - .end = IRQ_DA850_VPIFINT, + .start = DAVINCI_INTC_IRQ(IRQ_DA850_VPIFINT), + .end = DAVINCI_INTC_IRQ(IRQ_DA850_VPIFINT), .flags = IORESOURCE_IRQ, }, }; @@ -677,13 +574,13 @@ static struct platform_device da850_vpif_display_dev = { static struct resource da850_vpif_capture_resource[] = { { - .start = IRQ_DA850_VPIFINT, - .end = IRQ_DA850_VPIFINT, + .start = DAVINCI_INTC_IRQ(IRQ_DA850_VPIFINT), + .end = DAVINCI_INTC_IRQ(IRQ_DA850_VPIFINT), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA850_VPIFINT, - .end = IRQ_DA850_VPIFINT, + .start = DAVINCI_INTC_IRQ(IRQ_DA850_VPIFINT), + .end = DAVINCI_INTC_IRQ(IRQ_DA850_VPIFINT), .flags = IORESOURCE_IRQ, }, }; @@ -738,10 +635,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = { .pinmux_base = DA8XX_SYSCFG0_BASE + 0x120, .pinmux_pins = da850_pins, .pinmux_pins_num = ARRAY_SIZE(da850_pins), - .intc_base = DA8XX_CP_INTC_BASE, - .intc_type = DAVINCI_INTC_TYPE_CP_INTC, - .intc_irq_prios = da850_default_priorities, - .intc_irq_num = DA850_N_CP_INTC_IRQ, .timer_info = &da850_timer_info, .emac_pdata = &da8xx_emac_pdata, .sram_dma = DA8XX_SHARED_RAM_BASE, @@ -760,6 +653,20 @@ void __init da850_init(void) WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module"); } +static const struct davinci_cp_intc_config da850_cp_intc_config = { + .reg = { + .start = DA8XX_CP_INTC_BASE, + .end = DA8XX_CP_INTC_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, + .num_irqs = DA850_N_CP_INTC_IRQ, +}; + +void __init da850_init_irq(void) +{ + davinci_cp_intc_init(&da850_cp_intc_config); +} + void __init da850_init_time(void) { void __iomem *pll0; diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index beac80ec4037..9c0dd028d5ad 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ * * Modified from mach-omap/omap2/board-generic.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <asm/mach/arch.h> diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index db4c95ef4d5c..56c1835c42e5 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -88,6 +88,7 @@ int davinci_init_wdt(void); /* DM355 function declarations */ void dm355_init(void); void dm355_init_time(void); +void dm355_init_irq(void); void dm355_register_clocks(void); void dm355_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); @@ -97,6 +98,7 @@ int dm355_gpio_register(void); /* DM365 function declarations */ void dm365_init(void); +void dm365_init_irq(void); void dm365_init_time(void); void dm365_register_clocks(void); void dm365_init_asp(void); @@ -110,6 +112,7 @@ int dm365_gpio_register(void); /* DM644x function declarations */ void dm644x_init(void); +void dm644x_init_irq(void); void dm644x_init_devices(void); void dm644x_init_time(void); void dm644x_register_clocks(void); @@ -119,6 +122,7 @@ int dm644x_gpio_register(void); /* DM646x function declarations */ void dm646x_init(void); +void dm646x_init_irq(void); void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate); void dm646x_register_clocks(void); void dm646x_init_mcasp0(struct snd_platform_data *pdata); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index cf78da5ab054..2d69e704f7f6 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -1,14 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DA8XX/OMAP L1XX platform device data * * Copyright (c) 2007-2009, MontaVista Software, Inc. <source@mvista.com> * Derived from code that was: * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/ahci_platform.h> #include <linux/clk-provider.h> @@ -17,6 +13,7 @@ #include <linux/dma-contiguous.h> #include <linux/dmaengine.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/platform_device.h> #include <linux/reboot.h> #include <linux/serial_8250.h> @@ -28,6 +25,7 @@ #include "asp.h" #include "cpuidle.h" +#include "irqs.h" #include "sram.h" #define DA8XX_TPCC_BASE 0x01c00000 @@ -64,7 +62,7 @@ void __iomem *da8xx_syscfg1_base; static struct plat_serial8250_port da8xx_serial0_pdata[] = { { .mapbase = DA8XX_UART0_BASE, - .irq = IRQ_DA8XX_UARTINT0, + .irq = DAVINCI_INTC_IRQ(IRQ_DA8XX_UARTINT0), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM, @@ -77,7 +75,7 @@ static struct plat_serial8250_port da8xx_serial0_pdata[] = { static struct plat_serial8250_port da8xx_serial1_pdata[] = { { .mapbase = DA8XX_UART1_BASE, - .irq = IRQ_DA8XX_UARTINT1, + .irq = DAVINCI_INTC_IRQ(IRQ_DA8XX_UARTINT1), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM, @@ -90,7 +88,7 @@ static struct plat_serial8250_port da8xx_serial1_pdata[] = { static struct plat_serial8250_port da8xx_serial2_pdata[] = { { .mapbase = DA8XX_UART2_BASE, - .irq = IRQ_DA8XX_UARTINT2, + .irq = DAVINCI_INTC_IRQ(IRQ_DA8XX_UARTINT2), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM, @@ -171,12 +169,12 @@ static struct resource da8xx_edma0_resources[] = { }, { .name = "edma3_ccint", - .start = IRQ_DA8XX_CCINT0, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_CCINT0), .flags = IORESOURCE_IRQ, }, { .name = "edma3_ccerrint", - .start = IRQ_DA8XX_CCERRINT, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_CCERRINT), .flags = IORESOURCE_IRQ, }, }; @@ -196,12 +194,12 @@ static struct resource da850_edma1_resources[] = { }, { .name = "edma3_ccint", - .start = IRQ_DA850_CCINT1, + .start = DAVINCI_INTC_IRQ(IRQ_DA850_CCINT1), .flags = IORESOURCE_IRQ, }, { .name = "edma3_ccerrint", - .start = IRQ_DA850_CCERRINT1, + .start = DAVINCI_INTC_IRQ(IRQ_DA850_CCERRINT1), .flags = IORESOURCE_IRQ, }, }; @@ -306,8 +304,8 @@ static struct resource da8xx_i2c_resources0[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_DA8XX_I2CINT0, - .end = IRQ_DA8XX_I2CINT0, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT0), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT0), .flags = IORESOURCE_IRQ, }, }; @@ -326,8 +324,8 @@ static struct resource da8xx_i2c_resources1[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_DA8XX_I2CINT1, - .end = IRQ_DA8XX_I2CINT1, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT1), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT1), .flags = IORESOURCE_IRQ, }, }; @@ -382,23 +380,23 @@ static struct resource da8xx_emac_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_DA8XX_C0_RX_THRESH_PULSE, - .end = IRQ_DA8XX_C0_RX_THRESH_PULSE, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_THRESH_PULSE), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_THRESH_PULSE), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_C0_RX_PULSE, - .end = IRQ_DA8XX_C0_RX_PULSE, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_PULSE), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_PULSE), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_C0_TX_PULSE, - .end = IRQ_DA8XX_C0_TX_PULSE, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_TX_PULSE), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_TX_PULSE), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_C0_MISC_PULSE, - .end = IRQ_DA8XX_C0_MISC_PULSE, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_MISC_PULSE), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_MISC_PULSE), .flags = IORESOURCE_IRQ, }, }; @@ -470,7 +468,7 @@ static struct resource da830_mcasp1_resources[] = { }, { .name = "common", - .start = IRQ_DA8XX_MCASPINT, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_MCASPINT), .flags = IORESOURCE_IRQ, }, }; @@ -505,7 +503,7 @@ static struct resource da830_mcasp2_resources[] = { }, { .name = "common", - .start = IRQ_DA8XX_MCASPINT, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_MCASPINT), .flags = IORESOURCE_IRQ, }, }; @@ -540,7 +538,7 @@ static struct resource da850_mcasp_resources[] = { }, { .name = "common", - .start = IRQ_DA8XX_MCASPINT, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_MCASPINT), .flags = IORESOURCE_IRQ, }, }; @@ -588,43 +586,43 @@ static struct resource da8xx_pruss_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_DA8XX_EVTOUT0, - .end = IRQ_DA8XX_EVTOUT0, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT0), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT0), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_EVTOUT1, - .end = IRQ_DA8XX_EVTOUT1, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT1), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT1), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_EVTOUT2, - .end = IRQ_DA8XX_EVTOUT2, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT2), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT2), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_EVTOUT3, - .end = IRQ_DA8XX_EVTOUT3, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT3), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT3), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_EVTOUT4, - .end = IRQ_DA8XX_EVTOUT4, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT4), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT4), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_EVTOUT5, - .end = IRQ_DA8XX_EVTOUT5, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT5), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT5), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_EVTOUT6, - .end = IRQ_DA8XX_EVTOUT6, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT6), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT6), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_EVTOUT7, - .end = IRQ_DA8XX_EVTOUT7, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT7), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT7), .flags = IORESOURCE_IRQ, }, }; @@ -674,8 +672,8 @@ static struct resource da8xx_lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { /* interrupt */ - .start = IRQ_DA8XX_LCDINT, - .end = IRQ_DA8XX_LCDINT, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_LCDINT), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_LCDINT), .flags = IORESOURCE_IRQ, }, }; @@ -685,6 +683,9 @@ static struct platform_device da8xx_lcdc_device = { .id = 0, .num_resources = ARRAY_SIZE(da8xx_lcdc_resources), .resource = da8xx_lcdc_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + } }; int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata) @@ -700,48 +701,48 @@ static struct resource da8xx_gpio_resources[] = { .flags = IORESOURCE_MEM, }, { /* interrupt */ - .start = IRQ_DA8XX_GPIO0, - .end = IRQ_DA8XX_GPIO0, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO0), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO0), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_GPIO1, - .end = IRQ_DA8XX_GPIO1, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO1), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO1), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_GPIO2, - .end = IRQ_DA8XX_GPIO2, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO2), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO2), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_GPIO3, - .end = IRQ_DA8XX_GPIO3, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO3), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO3), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_GPIO4, - .end = IRQ_DA8XX_GPIO4, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO4), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO4), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_GPIO5, - .end = IRQ_DA8XX_GPIO5, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO5), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO5), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_GPIO6, - .end = IRQ_DA8XX_GPIO6, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO6), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO6), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_GPIO7, - .end = IRQ_DA8XX_GPIO7, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO7), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO7), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DA8XX_GPIO8, - .end = IRQ_DA8XX_GPIO8, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO8), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO8), .flags = IORESOURCE_IRQ, }, }; @@ -766,8 +767,8 @@ static struct resource da8xx_mmcsd0_resources[] = { .flags = IORESOURCE_MEM, }, { /* interrupt */ - .start = IRQ_DA8XX_MMCSDINT0, - .end = IRQ_DA8XX_MMCSDINT0, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_MMCSDINT0), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_MMCSDINT0), .flags = IORESOURCE_IRQ, }, }; @@ -793,8 +794,8 @@ static struct resource da850_mmcsd1_resources[] = { .flags = IORESOURCE_MEM, }, { /* interrupt */ - .start = IRQ_DA850_MMCSDINT0_1, - .end = IRQ_DA850_MMCSDINT0_1, + .start = DAVINCI_INTC_IRQ(IRQ_DA850_MMCSDINT0_1), + .end = DAVINCI_INTC_IRQ(IRQ_DA850_MMCSDINT0_1), .flags = IORESOURCE_IRQ, }, }; @@ -845,8 +846,8 @@ static struct resource da8xx_rproc_resources[] = { .flags = IORESOURCE_MEM, }, { /* dsp irq */ - .start = IRQ_DA8XX_CHIPINT0, - .end = IRQ_DA8XX_CHIPINT0, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_CHIPINT0), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_CHIPINT0), .flags = IORESOURCE_IRQ, }, }; @@ -936,13 +937,13 @@ static struct resource da8xx_rtc_resources[] = { .flags = IORESOURCE_MEM, }, { /* timer irq */ - .start = IRQ_DA8XX_RTC, - .end = IRQ_DA8XX_RTC, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC), .flags = IORESOURCE_IRQ, }, { /* alarm irq */ - .start = IRQ_DA8XX_RTC, - .end = IRQ_DA8XX_RTC, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC), .flags = IORESOURCE_IRQ, }, }; @@ -1009,8 +1010,8 @@ static struct resource da8xx_spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_DA8XX_SPINT0, - .end = IRQ_DA8XX_SPINT0, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT0), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT0), .flags = IORESOURCE_IRQ, }, }; @@ -1022,8 +1023,8 @@ static struct resource da8xx_spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_DA8XX_SPINT1, - .end = IRQ_DA8XX_SPINT1, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT1), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT1), .flags = IORESOURCE_IRQ, }, }; @@ -1103,7 +1104,7 @@ static struct resource da850_sata_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_DA850_SATAINT, + .start = DAVINCI_INTC_IRQ(IRQ_DA850_SATAINT), .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index e8dbbb7479ab..3e447d468845 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -1,31 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * mach-davinci/devices.c * * DaVinci platform device setup/initialization - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/platform_data/i2c-davinci.h> +#include <linux/platform_data/mmc-davinci.h> +#include <linux/platform_data/edma.h> #include <linux/dma-mapping.h> #include <linux/io.h> #include <linux/reboot.h> #include <mach/hardware.h> -#include <linux/platform_data/i2c-davinci.h> -#include <mach/irqs.h> #include <mach/cputype.h> #include <mach/mux.h> -#include <linux/platform_data/mmc-davinci.h> #include <mach/time.h> -#include <linux/platform_data/edma.h> - #include "davinci.h" +#include "irqs.h" #define DAVINCI_I2C_BASE 0x01C21000 #define DAVINCI_ATA_BASE 0x01C66000 @@ -56,7 +51,7 @@ static struct resource i2c_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_I2C, + .start = DAVINCI_INTC_IRQ(IRQ_I2C), .flags = IORESOURCE_IRQ, }, }; @@ -84,8 +79,8 @@ static struct resource ide_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_IDE, - .end = IRQ_IDE, + .start = DAVINCI_INTC_IRQ(IRQ_IDE), + .end = DAVINCI_INTC_IRQ(IRQ_IDE), .flags = IORESOURCE_IRQ, }, }; @@ -133,11 +128,11 @@ static struct resource mmcsd0_resources[] = { }, /* IRQs: MMC/SD, then SDIO */ { - .start = IRQ_MMCINT, + .start = DAVINCI_INTC_IRQ(IRQ_MMCINT), .flags = IORESOURCE_IRQ, }, { /* different on dm355 */ - .start = IRQ_SDIOINT, + .start = DAVINCI_INTC_IRQ(IRQ_SDIOINT), .flags = IORESOURCE_IRQ, }, }; @@ -163,10 +158,10 @@ static struct resource mmcsd1_resources[] = { }, /* IRQs: MMC/SD, then SDIO */ { - .start = IRQ_DM355_MMCINT1, + .start = DAVINCI_INTC_IRQ(IRQ_DM355_MMCINT1), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM355_SDIOINT1, + .start = DAVINCI_INTC_IRQ(IRQ_DM355_SDIOINT1), .flags = IORESOURCE_IRQ, }, }; @@ -219,7 +214,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) mmcsd1_resources[0].start = DM365_MMCSD1_BASE; mmcsd1_resources[0].end = DM365_MMCSD1_BASE + SZ_4K - 1; - mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1; + mmcsd1_resources[2].start = DAVINCI_INTC_IRQ( + IRQ_DM365_SDIOINT1); davinci_mmcsd1_device.name = "da830-mmc"; } else break; @@ -230,7 +226,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) if (cpu_is_davinci_dm355()) { mmcsd0_resources[0].start = DM355_MMCSD0_BASE; mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1; - mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0; + mmcsd0_resources[2].start = DAVINCI_INTC_IRQ( + IRQ_DM355_SDIOINT0); /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */ davinci_cfg_reg(DM355_MMCSD0); @@ -241,7 +238,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) mmcsd0_resources[0].start = DM365_MMCSD0_BASE; mmcsd0_resources[0].end = DM365_MMCSD0_BASE + SZ_4K - 1; - mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0; + mmcsd0_resources[2].start = DAVINCI_INTC_IRQ( + IRQ_DM365_SDIOINT0); davinci_mmcsd0_device.name = "da830-mmc"; } else if (cpu_is_davinci_dm644x()) { /* REVISIT: should this be in board-init code? */ @@ -313,13 +311,13 @@ int davinci_gpio_register(struct resource *res, int size, void *pdata) struct davinci_timer_instance davinci_timer_instance[2] = { { .base = DAVINCI_TIMER0_BASE, - .bottom_irq = IRQ_TINT0_TINT12, - .top_irq = IRQ_TINT0_TINT34, + .bottom_irq = DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12), + .top_irq = DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34), }, { .base = DAVINCI_TIMER1_BASE, - .bottom_irq = IRQ_TINT1_TINT12, - .top_irq = IRQ_TINT1_TINT34, + .bottom_irq = DAVINCI_INTC_IRQ(IRQ_TINT1_TINT12), + .top_irq = DAVINCI_INTC_IRQ(IRQ_TINT1_TINT34), }, }; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 4c6e0bef4509..c6073326be2e 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -15,6 +15,8 @@ #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/init.h> +#include <linux/io.h> +#include <linux/irqchip/irq-davinci-aintc.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> #include <linux/platform_data/spi-davinci.h> @@ -26,13 +28,13 @@ #include <mach/common.h> #include <mach/cputype.h> -#include <mach/irqs.h> #include <mach/mux.h> #include <mach/serial.h> #include <mach/time.h> #include "asp.h" #include "davinci.h" +#include "irqs.h" #include "mux.h" #define DM355_UART2_BASE (IO_PHYS + 0x206000) @@ -53,7 +55,7 @@ static struct resource dm355_spi0_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_DM355_SPINT0_0, + .start = DAVINCI_INTC_IRQ(IRQ_DM355_SPINT0_0), .flags = IORESOURCE_IRQ, }, }; @@ -273,12 +275,12 @@ static struct resource edma_resources[] = { }, { .name = "edma3_ccint", - .start = IRQ_CCINT0, + .start = DAVINCI_INTC_IRQ(IRQ_CCINT0), .flags = IORESOURCE_IRQ, }, { .name = "edma3_ccerrint", - .start = IRQ_CCERRINT, + .start = DAVINCI_INTC_IRQ(IRQ_CCERRINT), .flags = IORESOURCE_IRQ, }, /* not using (or muxing) TC*_ERR */ @@ -358,13 +360,13 @@ static struct platform_device dm355_vpss_device = { static struct resource vpfe_resources[] = { { - .start = IRQ_VDINT0, - .end = IRQ_VDINT0, + .start = DAVINCI_INTC_IRQ(IRQ_VDINT0), + .end = DAVINCI_INTC_IRQ(IRQ_VDINT0), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_VDINT1, - .end = IRQ_VDINT1, + .start = DAVINCI_INTC_IRQ(IRQ_VDINT1), + .end = DAVINCI_INTC_IRQ(IRQ_VDINT1), .flags = IORESOURCE_IRQ, }, }; @@ -422,8 +424,8 @@ static struct platform_device dm355_osd_dev = { static struct resource dm355_venc_resources[] = { { - .start = IRQ_VENCINT, - .end = IRQ_VENCINT, + .start = DAVINCI_INTC_IRQ(IRQ_VENCINT), + .end = DAVINCI_INTC_IRQ(IRQ_VENCINT), .flags = IORESOURCE_IRQ, }, /* venc registers io space */ @@ -442,8 +444,8 @@ static struct resource dm355_venc_resources[] = { static struct resource dm355_v4l2_disp_resources[] = { { - .start = IRQ_VENCINT, - .end = IRQ_VENCINT, + .start = DAVINCI_INTC_IRQ(IRQ_VENCINT), + .end = DAVINCI_INTC_IRQ(IRQ_VENCINT), .flags = IORESOURCE_IRQ, }, /* venc registers io space */ @@ -547,38 +549,38 @@ static struct resource dm355_gpio_resources[] = { .flags = IORESOURCE_MEM, }, { /* interrupt */ - .start = IRQ_DM355_GPIOBNK0, - .end = IRQ_DM355_GPIOBNK0, + .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0), + .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM355_GPIOBNK1, - .end = IRQ_DM355_GPIOBNK1, + .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1), + .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM355_GPIOBNK2, - .end = IRQ_DM355_GPIOBNK2, + .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2), + .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM355_GPIOBNK3, - .end = IRQ_DM355_GPIOBNK3, + .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3), + .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM355_GPIOBNK4, - .end = IRQ_DM355_GPIOBNK4, + .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4), + .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM355_GPIOBNK5, - .end = IRQ_DM355_GPIOBNK5, + .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5), + .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM355_GPIOBNK6, - .end = IRQ_DM355_GPIOBNK6, + .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6), + .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6), .flags = IORESOURCE_IRQ, }, }; @@ -632,7 +634,7 @@ static struct davinci_timer_info dm355_timer_info = { static struct plat_serial8250_port dm355_serial0_platform_data[] = { { .mapbase = DAVINCI_UART0_BASE, - .irq = IRQ_UARTINT0, + .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT0), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM, @@ -645,7 +647,7 @@ static struct plat_serial8250_port dm355_serial0_platform_data[] = { static struct plat_serial8250_port dm355_serial1_platform_data[] = { { .mapbase = DAVINCI_UART1_BASE, - .irq = IRQ_UARTINT1, + .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT1), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM, @@ -658,7 +660,7 @@ static struct plat_serial8250_port dm355_serial1_platform_data[] = { static struct plat_serial8250_port dm355_serial2_platform_data[] = { { .mapbase = DM355_UART2_BASE, - .irq = IRQ_DM355_UARTINT2, + .irq = DAVINCI_INTC_IRQ(IRQ_DM355_UARTINT2), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM, @@ -704,10 +706,6 @@ static const struct davinci_soc_info davinci_soc_info_dm355 = { .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, .pinmux_pins = dm355_pins, .pinmux_pins_num = ARRAY_SIZE(dm355_pins), - .intc_base = DAVINCI_ARM_INTC_BASE, - .intc_type = DAVINCI_INTC_TYPE_AINTC, - .intc_irq_prios = dm355_default_priorities, - .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm355_timer_info, .sram_dma = 0x00010000, .sram_len = SZ_32K, @@ -793,6 +791,21 @@ int __init dm355_init_video(struct vpfe_config *vpfe_cfg, return 0; } +static const struct davinci_aintc_config dm355_aintc_config = { + .reg = { + .start = DAVINCI_ARM_INTC_BASE, + .end = DAVINCI_ARM_INTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .num_irqs = 64, + .prios = dm355_default_priorities, +}; + +void __init dm355_init_irq(void) +{ + davinci_aintc_init(&dm355_aintc_config); +} + static int __init dm355_init_devices(void) { struct platform_device *edma_pdev; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 01fb2b0c82de..2f9ae6431bf5 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -19,6 +19,8 @@ #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/init.h> +#include <linux/io.h> +#include <linux/irqchip/irq-davinci-aintc.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> #include <linux/platform_data/keyscan-davinci.h> @@ -31,13 +33,13 @@ #include <mach/common.h> #include <mach/cputype.h> -#include <mach/irqs.h> #include <mach/mux.h> #include <mach/serial.h> #include <mach/time.h> #include "asp.h" #include "davinci.h" +#include "irqs.h" #include "mux.h" #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ @@ -224,7 +226,7 @@ static struct resource dm365_spi0_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_DM365_SPIINT0_0, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_SPIINT0_0), .flags = IORESOURCE_IRQ, }, }; @@ -266,43 +268,43 @@ static struct resource dm365_gpio_resources[] = { .flags = IORESOURCE_MEM, }, { /* interrupt */ - .start = IRQ_DM365_GPIO0, - .end = IRQ_DM365_GPIO0, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM365_GPIO1, - .end = IRQ_DM365_GPIO1, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM365_GPIO2, - .end = IRQ_DM365_GPIO2, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM365_GPIO3, - .end = IRQ_DM365_GPIO3, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM365_GPIO4, - .end = IRQ_DM365_GPIO4, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM365_GPIO5, - .end = IRQ_DM365_GPIO5, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM365_GPIO6, - .end = IRQ_DM365_GPIO6, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM365_GPIO7, - .end = IRQ_DM365_GPIO7, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7), .flags = IORESOURCE_IRQ, }, }; @@ -336,23 +338,23 @@ static struct resource dm365_emac_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_DM365_EMAC_RXTHRESH, - .end = IRQ_DM365_EMAC_RXTHRESH, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM365_EMAC_RXPULSE, - .end = IRQ_DM365_EMAC_RXPULSE, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM365_EMAC_TXPULSE, - .end = IRQ_DM365_EMAC_TXPULSE, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM365_EMAC_MISCPULSE, - .end = IRQ_DM365_EMAC_MISCPULSE, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE), .flags = IORESOURCE_IRQ, }, }; @@ -518,12 +520,12 @@ static struct resource edma_resources[] = { }, { .name = "edma3_ccint", - .start = IRQ_CCINT0, + .start = DAVINCI_INTC_IRQ(IRQ_CCINT0), .flags = IORESOURCE_IRQ, }, { .name = "edma3_ccerrint", - .start = IRQ_CCERRINT, + .start = DAVINCI_INTC_IRQ(IRQ_CCERRINT), .flags = IORESOURCE_IRQ, }, /* not using TC*_ERR */ @@ -597,7 +599,7 @@ static struct resource dm365_rtc_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_DM365_RTCINT, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_RTCINT), .flags = IORESOURCE_IRQ, }, }; @@ -627,8 +629,8 @@ static struct resource dm365_ks_resources[] = { }, { /* interrupt */ - .start = IRQ_DM365_KEYINT, - .end = IRQ_DM365_KEYINT, + .start = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT), + .end = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT), .flags = IORESOURCE_IRQ, }, }; @@ -669,7 +671,7 @@ static struct davinci_timer_info dm365_timer_info = { static struct plat_serial8250_port dm365_serial0_platform_data[] = { { .mapbase = DAVINCI_UART0_BASE, - .irq = IRQ_UARTINT0, + .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT0), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM, @@ -682,7 +684,7 @@ static struct plat_serial8250_port dm365_serial0_platform_data[] = { static struct plat_serial8250_port dm365_serial1_platform_data[] = { { .mapbase = DM365_UART1_BASE, - .irq = IRQ_UARTINT1, + .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT1), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM, @@ -721,10 +723,6 @@ static const struct davinci_soc_info davinci_soc_info_dm365 = { .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, .pinmux_pins = dm365_pins, .pinmux_pins_num = ARRAY_SIZE(dm365_pins), - .intc_base = DAVINCI_ARM_INTC_BASE, - .intc_type = DAVINCI_INTC_TYPE_AINTC, - .intc_irq_prios = dm365_default_priorities, - .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm365_timer_info, .emac_pdata = &dm365_emac_pdata, .sram_dma = 0x00010000, @@ -822,13 +820,13 @@ static struct platform_device dm365_vpss_device = { static struct resource vpfe_resources[] = { { - .start = IRQ_VDINT0, - .end = IRQ_VDINT0, + .start = DAVINCI_INTC_IRQ(IRQ_VDINT0), + .end = DAVINCI_INTC_IRQ(IRQ_VDINT0), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_VDINT1, - .end = IRQ_VDINT1, + .start = DAVINCI_INTC_IRQ(IRQ_VDINT1), + .end = DAVINCI_INTC_IRQ(IRQ_VDINT1), .flags = IORESOURCE_IRQ, }, }; @@ -909,8 +907,8 @@ static struct platform_device dm365_osd_dev = { static struct resource dm365_venc_resources[] = { { - .start = IRQ_VENCINT, - .end = IRQ_VENCINT, + .start = DAVINCI_INTC_IRQ(IRQ_VENCINT), + .end = DAVINCI_INTC_IRQ(IRQ_VENCINT), .flags = IORESOURCE_IRQ, }, /* venc registers io space */ @@ -929,8 +927,8 @@ static struct resource dm365_venc_resources[] = { static struct resource dm365_v4l2_disp_resources[] = { { - .start = IRQ_VENCINT, - .end = IRQ_VENCINT, + .start = DAVINCI_INTC_IRQ(IRQ_VENCINT), + .end = DAVINCI_INTC_IRQ(IRQ_VENCINT), .flags = IORESOURCE_IRQ, }, /* venc registers io space */ @@ -1052,6 +1050,21 @@ int __init dm365_init_video(struct vpfe_config *vpfe_cfg, return 0; } +static const struct davinci_aintc_config dm365_aintc_config = { + .reg = { + .start = DAVINCI_ARM_INTC_BASE, + .end = DAVINCI_ARM_INTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .num_irqs = 64, + .prios = dm365_default_priorities, +}; + +void __init dm365_init_irq(void) +{ + davinci_aintc_init(&dm365_aintc_config); +} + static int __init dm365_init_devices(void) { struct platform_device *edma_pdev; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 38f92b7d413e..1b9e9a6192ef 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -14,6 +14,8 @@ #include <linux/clkdev.h> #include <linux/dmaengine.h> #include <linux/init.h> +#include <linux/io.h> +#include <linux/irqchip/irq-davinci-aintc.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> #include <linux/platform_device.h> @@ -23,13 +25,13 @@ #include <mach/common.h> #include <mach/cputype.h> -#include <mach/irqs.h> #include <mach/mux.h> #include <mach/serial.h> #include <mach/time.h> #include "asp.h" #include "davinci.h" +#include "irqs.h" #include "mux.h" /* @@ -59,8 +61,8 @@ static struct resource dm644x_emac_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_EMACINT, - .end = IRQ_EMACINT, + .start = DAVINCI_INTC_IRQ(IRQ_EMACINT), + .end = DAVINCI_INTC_IRQ(IRQ_EMACINT), .flags = IORESOURCE_IRQ, }, }; @@ -260,12 +262,12 @@ static struct resource edma_resources[] = { }, { .name = "edma3_ccint", - .start = IRQ_CCINT0, + .start = DAVINCI_INTC_IRQ(IRQ_CCINT0), .flags = IORESOURCE_IRQ, }, { .name = "edma3_ccerrint", - .start = IRQ_CCERRINT, + .start = DAVINCI_INTC_IRQ(IRQ_CCERRINT), .flags = IORESOURCE_IRQ, }, /* not using TC*_ERR */ @@ -330,13 +332,13 @@ static struct platform_device dm644x_vpss_device = { static struct resource dm644x_vpfe_resources[] = { { - .start = IRQ_VDINT0, - .end = IRQ_VDINT0, + .start = DAVINCI_INTC_IRQ(IRQ_VDINT0), + .end = DAVINCI_INTC_IRQ(IRQ_VDINT0), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_VDINT1, - .end = IRQ_VDINT1, + .start = DAVINCI_INTC_IRQ(IRQ_VDINT1), + .end = DAVINCI_INTC_IRQ(IRQ_VDINT1), .flags = IORESOURCE_IRQ, }, }; @@ -442,8 +444,8 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, static struct resource dm644x_v4l2_disp_resources[] = { { - .start = IRQ_VENCINT, - .end = IRQ_VENCINT, + .start = DAVINCI_INTC_IRQ(IRQ_VENCINT), + .end = DAVINCI_INTC_IRQ(IRQ_VENCINT), .flags = IORESOURCE_IRQ, }, }; @@ -491,28 +493,28 @@ static struct resource dm644_gpio_resources[] = { .flags = IORESOURCE_MEM, }, { /* interrupt */ - .start = IRQ_GPIOBNK0, - .end = IRQ_GPIOBNK0, + .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK0), + .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK0), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_GPIOBNK1, - .end = IRQ_GPIOBNK1, + .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK1), + .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK1), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_GPIOBNK2, - .end = IRQ_GPIOBNK2, + .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK2), + .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK2), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_GPIOBNK3, - .end = IRQ_GPIOBNK3, + .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK3), + .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK3), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_GPIOBNK4, - .end = IRQ_GPIOBNK4, + .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK4), + .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK4), .flags = IORESOURCE_IRQ, }, }; @@ -573,7 +575,7 @@ static struct davinci_timer_info dm644x_timer_info = { static struct plat_serial8250_port dm644x_serial0_platform_data[] = { { .mapbase = DAVINCI_UART0_BASE, - .irq = IRQ_UARTINT0, + .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT0), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM, @@ -586,7 +588,7 @@ static struct plat_serial8250_port dm644x_serial0_platform_data[] = { static struct plat_serial8250_port dm644x_serial1_platform_data[] = { { .mapbase = DAVINCI_UART1_BASE, - .irq = IRQ_UARTINT1, + .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT1), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM, @@ -599,7 +601,7 @@ static struct plat_serial8250_port dm644x_serial1_platform_data[] = { static struct plat_serial8250_port dm644x_serial2_platform_data[] = { { .mapbase = DAVINCI_UART2_BASE, - .irq = IRQ_UARTINT2, + .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT2), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM, @@ -645,10 +647,6 @@ static const struct davinci_soc_info davinci_soc_info_dm644x = { .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, .pinmux_pins = dm644x_pins, .pinmux_pins_num = ARRAY_SIZE(dm644x_pins), - .intc_base = DAVINCI_ARM_INTC_BASE, - .intc_type = DAVINCI_INTC_TYPE_AINTC, - .intc_irq_prios = dm644x_default_priorities, - .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm644x_timer_info, .emac_pdata = &dm644x_emac_pdata, .sram_dma = 0x00008000, @@ -729,6 +727,21 @@ int __init dm644x_init_video(struct vpfe_config *vpfe_cfg, return 0; } +static const struct davinci_aintc_config dm644x_aintc_config = { + .reg = { + .start = DAVINCI_ARM_INTC_BASE, + .end = DAVINCI_ARM_INTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .num_irqs = 64, + .prios = dm644x_default_priorities, +}; + +void __init dm644x_init_irq(void) +{ + davinci_aintc_init(&dm644x_aintc_config); +} + void __init dm644x_init_devices(void) { struct platform_device *edma_pdev; diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 7dc54b2a610f..62ca952fe161 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -15,6 +15,8 @@ #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/init.h> +#include <linux/io.h> +#include <linux/irqchip/irq-davinci-aintc.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> #include <linux/platform_device.h> @@ -24,13 +26,13 @@ #include <mach/common.h> #include <mach/cputype.h> -#include <mach/irqs.h> #include <mach/mux.h> #include <mach/serial.h> #include <mach/time.h> #include "asp.h" #include "davinci.h" +#include "irqs.h" #include "mux.h" #define DAVINCI_VPIF_BASE (0x01C12000) @@ -62,23 +64,23 @@ static struct resource dm646x_emac_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_DM646X_EMACRXTHINT, - .end = IRQ_DM646X_EMACRXTHINT, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXTHINT), + .end = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXTHINT), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM646X_EMACRXINT, - .end = IRQ_DM646X_EMACRXINT, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXINT), + .end = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXINT), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM646X_EMACTXINT, - .end = IRQ_DM646X_EMACTXINT, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACTXINT), + .end = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACTXINT), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM646X_EMACMISCINT, - .end = IRQ_DM646X_EMACMISCINT, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACMISCINT), + .end = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACMISCINT), .flags = IORESOURCE_IRQ, }, }; @@ -273,12 +275,12 @@ static struct resource edma_resources[] = { }, { .name = "edma3_ccint", - .start = IRQ_CCINT0, + .start = DAVINCI_INTC_IRQ(IRQ_CCINT0), .flags = IORESOURCE_IRQ, }, { .name = "edma3_ccerrint", - .start = IRQ_CCERRINT, + .start = DAVINCI_INTC_IRQ(IRQ_CCERRINT), .flags = IORESOURCE_IRQ, }, /* not using TC*_ERR */ @@ -315,12 +317,12 @@ static struct resource dm646x_mcasp0_resources[] = { }, { .name = "tx", - .start = IRQ_DM646X_MCASP0TXINT, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP0TXINT), .flags = IORESOURCE_IRQ, }, { .name = "rx", - .start = IRQ_DM646X_MCASP0RXINT, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP0RXINT), .flags = IORESOURCE_IRQ, }, }; @@ -341,7 +343,7 @@ static struct resource dm646x_mcasp1_resources[] = { }, { .name = "tx", - .start = IRQ_DM646X_MCASP1TXINT, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP1TXINT), .flags = IORESOURCE_IRQ, }, }; @@ -388,13 +390,13 @@ static struct platform_device vpif_dev = { static struct resource vpif_display_resource[] = { { - .start = IRQ_DM646X_VP_VERTINT2, - .end = IRQ_DM646X_VP_VERTINT2, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT2), + .end = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT2), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM646X_VP_VERTINT3, - .end = IRQ_DM646X_VP_VERTINT3, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT3), + .end = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT3), .flags = IORESOURCE_IRQ, }, }; @@ -412,13 +414,13 @@ static struct platform_device vpif_display_dev = { static struct resource vpif_capture_resource[] = { { - .start = IRQ_DM646X_VP_VERTINT0, - .end = IRQ_DM646X_VP_VERTINT0, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT0), + .end = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT0), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM646X_VP_VERTINT1, - .end = IRQ_DM646X_VP_VERTINT1, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT1), + .end = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT1), .flags = IORESOURCE_IRQ, }, }; @@ -441,18 +443,18 @@ static struct resource dm646x_gpio_resources[] = { .flags = IORESOURCE_MEM, }, { /* interrupt */ - .start = IRQ_DM646X_GPIOBNK0, - .end = IRQ_DM646X_GPIOBNK0, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK0), + .end = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK0), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM646X_GPIOBNK1, - .end = IRQ_DM646X_GPIOBNK1, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK1), + .end = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK1), .flags = IORESOURCE_IRQ, }, { - .start = IRQ_DM646X_GPIOBNK2, - .end = IRQ_DM646X_GPIOBNK2, + .start = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK2), + .end = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK2), .flags = IORESOURCE_IRQ, }, }; @@ -513,7 +515,7 @@ static struct davinci_timer_info dm646x_timer_info = { static struct plat_serial8250_port dm646x_serial0_platform_data[] = { { .mapbase = DAVINCI_UART0_BASE, - .irq = IRQ_UARTINT0, + .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT0), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM32, @@ -526,7 +528,7 @@ static struct plat_serial8250_port dm646x_serial0_platform_data[] = { static struct plat_serial8250_port dm646x_serial1_platform_data[] = { { .mapbase = DAVINCI_UART1_BASE, - .irq = IRQ_UARTINT1, + .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT1), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM32, @@ -539,7 +541,7 @@ static struct plat_serial8250_port dm646x_serial1_platform_data[] = { static struct plat_serial8250_port dm646x_serial2_platform_data[] = { { .mapbase = DAVINCI_UART2_BASE, - .irq = IRQ_DM646X_UARTINT2, + .irq = DAVINCI_INTC_IRQ(IRQ_DM646X_UARTINT2), .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, .iotype = UPIO_MEM32, @@ -585,10 +587,6 @@ static const struct davinci_soc_info davinci_soc_info_dm646x = { .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, .pinmux_pins = dm646x_pins, .pinmux_pins_num = ARRAY_SIZE(dm646x_pins), - .intc_base = DAVINCI_ARM_INTC_BASE, - .intc_type = DAVINCI_INTC_TYPE_AINTC, - .intc_irq_prios = dm646x_default_priorities, - .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm646x_timer_info, .emac_pdata = &dm646x_emac_pdata, .sram_dma = 0x10010000, @@ -690,6 +688,21 @@ void __init dm646x_register_clocks(void) platform_device_register(&dm646x_pll2_device); } +static const struct davinci_aintc_config dm646x_aintc_config = { + .reg = { + .start = DAVINCI_ARM_INTC_BASE, + .end = DAVINCI_ARM_INTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .num_irqs = 64, + .prios = dm646x_default_priorities, +}; + +void __init dm646x_init_irq(void) +{ + davinci_aintc_init(&dm646x_aintc_config); +} + static int __init dm646x_init_devices(void) { int ret = 0; diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index b577e13a9c23..9526e5da0d33 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -17,11 +17,12 @@ #include <linux/types.h> #include <linux/reboot.h> -void davinci_timer_init(struct clk *clk); +#include <asm/irq.h> + +#define DAVINCI_INTC_START NR_IRQS +#define DAVINCI_INTC_IRQ(_irqnum) (DAVINCI_INTC_START + (_irqnum)) -extern void davinci_irq_init(void); -extern void __iomem *davinci_intc_base; -extern int davinci_intc_type; +void davinci_timer_init(struct clk *clk); struct davinci_timer_instance { u32 base; @@ -57,11 +58,6 @@ struct davinci_soc_info { u32 pinmux_base; const struct mux_config *pinmux_pins; unsigned long pinmux_pins_num; - u32 intc_base; - int intc_type; - u8 *intc_irq_prios; - unsigned long intc_irq_num; - u32 *intc_host_map; struct davinci_timer_info *timer_info; int gpio_type; u32 gpio_base; diff --git a/arch/arm/mach-davinci/include/mach/cpufreq.h b/arch/arm/mach-davinci/include/mach/cpufreq.h deleted file mode 100644 index 3c089cfb6cd6..000000000000 --- a/arch/arm/mach-davinci/include/mach/cpufreq.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * TI DaVinci CPUFreq platform support. - * - * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef _MACH_DAVINCI_CPUFREQ_H -#define _MACH_DAVINCI_CPUFREQ_H - -#include <linux/cpufreq.h> - -struct davinci_cpufreq_config { - struct cpufreq_frequency_table *freq_table; - int (*set_voltage) (unsigned int index); - int (*init) (void); -}; - -#endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index ab4a57f433f4..1618b30661a9 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -88,10 +88,12 @@ extern unsigned int da850_max_speed; #define DA8XX_ARM_RAM_BASE 0xffff0000 void da830_init(void); +void da830_init_irq(void); void da830_init_time(void); void da830_register_clocks(void); void da850_init(void); +void da850_init_irq(void); void da850_init_time(void); void da850_register_clocks(void); diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S deleted file mode 100644 index cf5f573eb5fd..000000000000 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Low-level IRQ helper macros for TI DaVinci-based platforms - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include <mach/irqs.h> - - .macro get_irqnr_preamble, base, tmp - ldr \base, =davinci_intc_base - ldr \base, [\base] - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC) - ldr \tmp, =davinci_intc_type - ldr \tmp, [\tmp] - cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC - beq 1001f -#endif -#if defined(CONFIG_AINTC) - ldr \tmp, [\base, #0x14] - movs \tmp, \tmp, lsr #2 - sub \irqnr, \tmp, #1 - b 1002f -#endif -#if defined(CONFIG_CP_INTC) -1001: ldr \irqnr, [\base, #0x80] /* get irq number */ - mov \tmp, \irqnr, lsr #31 - and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */ - and \tmp, \tmp, #0x1 - cmp \tmp, #0x1 -#endif -1002: - .endm diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c deleted file mode 100644 index 952dc126c390..000000000000 --- a/arch/arm/mach-davinci/irq.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Interrupt handler for DaVinci boards. - * - * Copyright (C) 2006 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/cputype.h> -#include <mach/common.h> -#include <asm/mach/irq.h> - -#define FIQ_REG0_OFFSET 0x0000 -#define FIQ_REG1_OFFSET 0x0004 -#define IRQ_REG0_OFFSET 0x0008 -#define IRQ_REG1_OFFSET 0x000C -#define IRQ_ENT_REG0_OFFSET 0x0018 -#define IRQ_ENT_REG1_OFFSET 0x001C -#define IRQ_INCTL_REG_OFFSET 0x0020 -#define IRQ_EABASE_REG_OFFSET 0x0024 -#define IRQ_INTPRI0_REG_OFFSET 0x0030 -#define IRQ_INTPRI7_REG_OFFSET 0x004C - -static inline void davinci_irq_writel(unsigned long value, int offset) -{ - __raw_writel(value, davinci_intc_base + offset); -} - -static __init void -davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) -{ - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq); - if (!gc) { - pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", - __func__, irq_start); - return; - } - - ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack_set_bit; - ct->chip.irq_mask = irq_gc_mask_clr_bit; - ct->chip.irq_unmask = irq_gc_mask_set_bit; - - ct->regs.ack = IRQ_REG0_OFFSET; - ct->regs.mask = IRQ_ENT_REG0_OFFSET; - irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); -} - -/* ARM Interrupt Controller Initialization */ -void __init davinci_irq_init(void) -{ - unsigned i, j; - const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios; - - davinci_intc_type = DAVINCI_INTC_TYPE_AINTC; - davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_4K); - if (WARN_ON(!davinci_intc_base)) - return; - - /* Clear all interrupt requests */ - davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); - davinci_irq_writel(~0x0, FIQ_REG1_OFFSET); - davinci_irq_writel(~0x0, IRQ_REG0_OFFSET); - davinci_irq_writel(~0x0, IRQ_REG1_OFFSET); - - /* Disable all interrupts */ - davinci_irq_writel(0x0, IRQ_ENT_REG0_OFFSET); - davinci_irq_writel(0x0, IRQ_ENT_REG1_OFFSET); - - /* Interrupts disabled immediately, IRQ entry reflects all */ - davinci_irq_writel(0x0, IRQ_INCTL_REG_OFFSET); - - /* we don't use the hardware vector table, just its entry addresses */ - davinci_irq_writel(0, IRQ_EABASE_REG_OFFSET); - - /* Clear all interrupt requests */ - davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); - davinci_irq_writel(~0x0, FIQ_REG1_OFFSET); - davinci_irq_writel(~0x0, IRQ_REG0_OFFSET); - davinci_irq_writel(~0x0, IRQ_REG1_OFFSET); - - for (i = IRQ_INTPRI0_REG_OFFSET; i <= IRQ_INTPRI7_REG_OFFSET; i += 4) { - u32 pri; - - for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++) - pri |= (*davinci_def_priorities & 0x07) << j; - davinci_irq_writel(pri, i); - } - - for (i = 0, j = 0; i < davinci_soc_info.intc_irq_num; i += 32, j += 0x04) - davinci_alloc_gc(davinci_intc_base + j, i, 32); - - irq_set_handler(IRQ_TINT1_TINT34, handle_level_irq); -} diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/irqs.h index edb2ca62321a..8f9fc7a56ce8 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/irqs.h @@ -30,9 +30,6 @@ /* Base address */ #define DAVINCI_ARM_INTC_BASE 0x01C48000 -#define DAVINCI_INTC_TYPE_AINTC 0 -#define DAVINCI_INTC_TYPE_CP_INTC 1 - /* Interrupt lines */ #define IRQ_VDINT0 0 #define IRQ_VDINT1 1 @@ -404,6 +401,5 @@ /* da850 currently has the most gpio pins (144) */ #define DAVINCI_N_GPIO 144 /* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */ -#define NR_IRQS (DA850_N_CP_INTC_IRQ + DAVINCI_N_GPIO) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c index 4858b1cdf31b..67f1c8537354 100644 --- a/arch/arm/mach-davinci/pdata-quirks.c +++ b/arch/arm/mach-davinci/pdata-quirks.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Legacy platform_data quirks * * Copyright (C) 2016 BayLibre, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/of_platform.h> diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index b5cc05dc2cb2..e33c6bcb4598 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * DaVinci Power Management Routines * * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/pm.h> diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 951b620bfa73..127b62ce7b1e 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -1,22 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * TI DaVinci serial driver * * Copyright (C) 2006 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * */ #include <linux/kernel.h> diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index cd350dee4df3..05d03f09ff54 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -1,19 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * (C) Copyright 2009, Texas Instruments, Inc. http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA */ /* replicated define because linux/bitops.h cannot be included in assembly */ diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index 668b6e749768..bbae190fd82c 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * mach-davinci/sram.c - DaVinci simple SRAM allocator * * Copyright (C) 2009 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/module.h> #include <linux/init.h> diff --git a/arch/arm/mach-davinci/sram.h b/arch/arm/mach-davinci/sram.h index 4e5db56218b8..7ef8d1d3c365 100644 --- a/arch/arm/mach-davinci/sram.h +++ b/arch/arm/mach-davinci/sram.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * mach/sram.h - DaVinci simple SRAM allocator * * Copyright (C) 2009 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __MACH_SRAM_H #define __MACH_SRAM_H diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c index c17ce66a3d95..25f21ee86f1a 100644 --- a/arch/arm/mach-davinci/usb-da8xx.c +++ b/arch/arm/mach-davinci/usb-da8xx.c @@ -18,7 +18,8 @@ #include <mach/common.h> #include <mach/cputype.h> #include <mach/da8xx.h> -#include <mach/irqs.h> + +#include "irqs.h" #define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB1_BASE 0x01e25000 @@ -70,7 +71,7 @@ static struct resource da8xx_usb20_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_DA8XX_USB_INT, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_USB_INT), .flags = IORESOURCE_IRQ, .name = "mc", }, @@ -105,8 +106,8 @@ static struct resource da8xx_usb11_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_DA8XX_IRQN, - .end = IRQ_DA8XX_IRQN, + .start = DAVINCI_INTC_IRQ(IRQ_DA8XX_IRQN), + .end = DAVINCI_INTC_IRQ(IRQ_DA8XX_IRQN), .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 31ed7aa47227..dd8db61cdd1c 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -2,16 +2,16 @@ /* * USB */ +#include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/dma-mapping.h> - +#include <linux/platform_data/usb-davinci.h> #include <linux/usb/musb.h> #include <mach/common.h> -#include <mach/irqs.h> #include <mach/cputype.h> -#include <linux/platform_data/usb-davinci.h> + +#include "irqs.h" #define DAVINCI_USB_OTG_BASE 0x01c64000 @@ -38,7 +38,7 @@ static struct resource usb_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_USBINT, + .start = DAVINCI_INTC_IRQ(IRQ_USBINT), .flags = IORESOURCE_IRQ, .name = "mc" }, @@ -70,8 +70,9 @@ void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms) if (cpu_is_davinci_dm646x()) { /* Override the defaults as DM6467 uses different IRQs. */ - usb_dev.resource[1].start = IRQ_DM646X_USBINT; - usb_dev.resource[2].start = IRQ_DM646X_USBDMAINT; + usb_dev.resource[1].start = DAVINCI_INTC_IRQ(IRQ_DM646X_USBINT); + usb_dev.resource[2].start = DAVINCI_INTC_IRQ( + IRQ_DM646X_USBDMAINT); } else /* other devices don't have dedicated CPPI IRQ */ usb_dev.num_resources = 2; diff --git a/arch/arm/mach-digicolor/Makefile b/arch/arm/mach-digicolor/Makefile index 3d8a1d228408..fc5b7c98c824 100644 --- a/arch/arm/mach-digicolor/Makefile +++ b/arch/arm/mach-digicolor/Makefile @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_ARCH_DIGICOLOR) += digicolor.o diff --git a/arch/arm/mach-digicolor/digicolor.c b/arch/arm/mach-digicolor/digicolor.c index 4d62f1bde4ed..156d0d5996a9 100644 --- a/arch/arm/mach-digicolor/digicolor.c +++ b/arch/arm/mach-digicolor/digicolor.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for Conexant Digicolor SoCs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <asm/mach/arch.h> diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot index 760a0efe7580..e4dd1d26038f 100644 --- a/arch/arm/mach-dove/Makefile.boot +++ b/arch/arm/mach-dove/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 0d420a2bfe3e..d7b826d2695c 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -11,6 +11,7 @@ #include <linux/clk-provider.h> #include <linux/dma-mapping.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/platform_data/dma-mv_xor.h> diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile index a7d68c13c1d1..296541315d25 100644 --- a/arch/arm/mach-ebsa110/Makefile +++ b/arch/arm/mach-ebsa110/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel. # diff --git a/arch/arm/mach-ebsa110/Makefile.boot b/arch/arm/mach-ebsa110/Makefile.boot index 83cf07c38ada..e7e98937c71b 100644 --- a/arch/arm/mach-ebsa110/Makefile.boot +++ b/arch/arm/mach-ebsa110/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0x00008000 params_phys-y := 0x00000400 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 688e5fed49a7..da2ff4f61d6b 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-ebsa110/core.c * * Copyright (C) 1998-2001 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Extra MM routines for the EBSA-110 architecture */ #include <linux/kernel.h> diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h index afe137ee172e..47acc610b6b4 100644 --- a/arch/arm/mach-ebsa110/core.h +++ b/arch/arm/mach-ebsa110/core.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 1996-2000 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file contains the core hardware definitions of the EBSA-110. */ #ifndef CORE_H diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h index f4e5407bd004..81f6967683f6 100644 --- a/arch/arm/mach-ebsa110/include/mach/hardware.h +++ b/arch/arm/mach-ebsa110/include/mach/hardware.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ebsa110/include/mach/hardware.h * * Copyright (C) 1996-2000 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file contains the hardware definitions of the EBSA-110. */ #ifndef __ASM_ARCH_HARDWARE_H diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h index 69975784acfa..ad170886c9aa 100644 --- a/arch/arm/mach-ebsa110/include/mach/io.h +++ b/arch/arm/mach-ebsa110/include/mach/io.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ebsa110/include/mach/io.h * * Copyright (C) 1997,1998 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Modifications: * 06-Dec-1997 RMK Created. */ diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h index a8f3771bc060..29a8671fe849 100644 --- a/arch/arm/mach-ebsa110/include/mach/irqs.h +++ b/arch/arm/mach-ebsa110/include/mach/irqs.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ebsa110/include/mach/irqs.h * * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define NR_IRQS 8 diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h index 866f8a1c6ff7..f025f405de50 100644 --- a/arch/arm/mach-ebsa110/include/mach/memory.h +++ b/arch/arm/mach-ebsa110/include/mach/memory.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ebsa110/include/mach/memory.h * * Copyright (C) 1996-1999 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Changelog: * 20-Oct-1996 RMK Created * 31-Dec-1997 RMK Fixed definitions to reduce warnings diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h index ab64bea69c72..3ec12efe98a6 100644 --- a/arch/arm/mach-ebsa110/include/mach/uncompress.h +++ b/arch/arm/mach-ebsa110/include/mach/uncompress.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ebsa110/include/mach/uncompress.h * * Copyright (C) 1996,1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/serial_reg.h> diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c index 0398258c20cd..fd1474b66d31 100644 --- a/arch/arm/mach-ebsa110/leds.c +++ b/arch/arm/mach-ebsa110/leds.c @@ -1,8 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Driver for the LED found on the EBSA110 machine * Based on Versatile and RealView machine LED code * - * License terms: GNU General Public License (GPL) version 2 * Author: Bryan Wu <bryan.wu@canonical.com> */ #include <linux/kernel.h> diff --git a/arch/arm/mach-efm32/Makefile b/arch/arm/mach-efm32/Makefile index 3a74af7413e8..dede3fa55a76 100644 --- a/arch/arm/mach-efm32/Makefile +++ b/arch/arm/mach-efm32/Makefile @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-y += dtmachine.o diff --git a/arch/arm/mach-efm32/Makefile.boot b/arch/arm/mach-efm32/Makefile.boot index eacfc3f5c33e..cec195d4fcba 100644 --- a/arch/arm/mach-efm32/Makefile.boot +++ b/arch/arm/mach-efm32/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # Empty file waiting for deletion once Makefile.boot isn't needed any more. # Patch waits for application at # http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index c095236d7ff8..f2db5fd38145 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only if ARCH_EP93XX menu "Cirrus EP93xx Implementation Options" diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot index ed82ed7c949f..4c0a039a5027 100644 --- a/arch/arm/mach-ep93xx/Makefile.boot +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only # Empty file waiting for deletion once Makefile.boot isn't needed any more. diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index bda6c3a5c923..57cfd8ebe04f 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ep93xx/adssphere.c * ADS Sphere support. * * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. */ #include <linux/kernel.h> @@ -15,7 +11,7 @@ #include <linux/platform_device.h> #include <linux/sizes.h> -#include <mach/hardware.h> +#include "hardware.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index d2eee707d27f..2810eb5b2aca 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ep93xx/clock.c * Clock control for Cirrus EP93xx chips. * * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. */ #define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt @@ -20,8 +16,9 @@ #include <linux/io.h> #include <linux/spinlock.h> #include <linux/clkdev.h> +#include <linux/soc/cirrus/ep93xx.h> -#include <mach/hardware.h> +#include "hardware.h" #include <asm/div64.h> diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 706515faee06..6fb19a393fd2 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ep93xx/core.c * Core routines for Cirrus EP93xx chips. @@ -7,11 +8,6 @@ * * Thanks go to Michael Burian and Ray Lehtiniemi for their key * role in the ep93xx linux community. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. */ #define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt @@ -39,11 +35,13 @@ #include <linux/usb/ohci_pdriver.h> #include <linux/random.h> -#include <mach/hardware.h> +#include "hardware.h" #include <linux/platform_data/video-ep93xx.h> #include <linux/platform_data/keypad-ep93xx.h> #include <linux/platform_data/spi-ep93xx.h> -#include <mach/gpio-ep93xx.h> +#include <linux/soc/cirrus/ep93xx.h> + +#include "gpio-ep93xx.h" #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -123,7 +121,7 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) /** * ep93xx_chip_revision() - returns the EP93xx chip revision * - * See <mach/platform.h> for more information. + * See "platform.h" for more information. */ unsigned int ep93xx_chip_revision(void) { diff --git a/arch/arm/mach-ep93xx/crunch-bits.S b/arch/arm/mach-ep93xx/crunch-bits.S index ee0be2af5c61..fb2dbf76f09e 100644 --- a/arch/arm/mach-ep93xx/crunch-bits.S +++ b/arch/arm/mach-ep93xx/crunch-bits.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/kernel/crunch-bits.S * Cirrus MaverickCrunch context switching and handling @@ -6,10 +7,6 @@ * * Shamelessly stolen from the iWMMXt code by Nicolas Pitre, which is * Copyright (c) 2003-2004, MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-ep93xx/crunch.c b/arch/arm/mach-ep93xx/crunch.c index a4a2ab9648c9..1c9a4be8b503 100644 --- a/arch/arm/mach-ep93xx/crunch.c +++ b/arch/arm/mach-ep93xx/crunch.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/kernel/crunch.c * Cirrus MaverickCrunch context switching and handling * * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c index 88a4c9b089a5..74515acab8ef 100644 --- a/arch/arm/mach-ep93xx/dma.c +++ b/arch/arm/mach-ep93xx/dma.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ep93xx/dma.c * @@ -11,11 +12,6 @@ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> * Copyright (C) 2006 Applied Data Systems * Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. */ #include <linux/dmaengine.h> @@ -26,7 +22,7 @@ #include <linux/platform_device.h> #include <linux/platform_data/dma-ep93xx.h> -#include <mach/hardware.h> +#include "hardware.h" #include "soc.h" diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 8e89ec8b6f0f..1f0da76a39de 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ep93xx/edb93xx.c * Cirrus Logic EDB93xx Development Board support. @@ -17,11 +18,6 @@ * EDB9312 * Copyright (C) 2006 Infosys Technologies Limited * Toufeeq Hussain <toufeeq_hussain@infosys.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. */ #include <linux/kernel.h> @@ -29,13 +25,14 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/spi/spi.h> +#include <linux/gpio/machine.h> #include <sound/cs4271.h> -#include <mach/hardware.h> +#include "hardware.h" #include <linux/platform_data/video-ep93xx.h> #include <linux/platform_data/spi-ep93xx.h> -#include <mach/gpio-ep93xx.h> +#include "gpio-ep93xx.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -105,13 +102,16 @@ static struct spi_board_info edb93xx_spi_board_info[] __initdata = { }, }; -static int edb93xx_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_EGPIO6, +static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + GPIO_LOOKUP("A", 6, "cs", GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info edb93xx_spi_info __initdata = { - .chipselect = edb93xx_spi_chipselects, - .num_chipselect = ARRAY_SIZE(edb93xx_spi_chipselects), + /* Intentionally left blank */ }; static void __init edb93xx_register_spi(void) @@ -123,6 +123,7 @@ static void __init edb93xx_register_spi(void) else if (machine_is_edb9315a()) edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14; + gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table); ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info, ARRAY_SIZE(edb93xx_spi_board_info)); } diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index 0cca5b183309..8905db1edd5a 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ep93xx/gesbc9312.c * Glomation GESBC-9312-sx support. * * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. */ #include <linux/kernel.h> @@ -15,7 +11,7 @@ #include <linux/platform_device.h> #include <linux/sizes.h> -#include <mach/hardware.h> +#include "hardware.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h index 242af4a401ea..242af4a401ea 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h +++ b/arch/arm/mach-ep93xx/gpio-ep93xx.h diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/hardware.h index 8938906e780a..e7d850e04782 100644 --- a/arch/arm/mach-ep93xx/include/mach/hardware.h +++ b/arch/arm/mach-ep93xx/hardware.h @@ -6,7 +6,7 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include <mach/platform.h> +#include "platform.h" /* * The EP93xx has two external crystal oscillators. To generate the diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index b0cf2de77f81..b3ec1db988db 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-ep93xx/include/mach/uncompress.h * * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. */ #include <mach/ep93xx-regs.h> diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 373583c29825..b18ebf26da45 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-ep93xx/micro9.c * @@ -5,10 +6,6 @@ * Manfred Gruber <m.gruber@tirol.com> * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH * Hubert Feurstein <hubert.feurstein@contec.at> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> @@ -16,7 +13,7 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/hardware.h> +#include "hardware.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/platform.h index 6c41c794bed5..b4045a186239 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/platform.h @@ -5,6 +5,7 @@ #ifndef __ASSEMBLY__ +#include <linux/platform_data/eth-ep93xx.h> #include <linux/reboot.h> struct device; @@ -15,23 +16,9 @@ struct ep93xxfb_mach_info; struct ep93xx_keypad_platform_data; struct ep93xx_spi_info; -struct ep93xx_eth_data -{ - unsigned char dev_addr[6]; - unsigned char phy_id; -}; - void ep93xx_map_io(void); void ep93xx_init_irq(void); -#define EP93XX_CHIP_REV_D0 3 -#define EP93XX_CHIP_REV_D1 4 -#define EP93XX_CHIP_REV_E0 5 -#define EP93XX_CHIP_REV_E1 6 -#define EP93XX_CHIP_REV_E2 7 - -unsigned int ep93xx_chip_revision(void); - void ep93xx_register_flash(unsigned int width, resource_size_t start, resource_size_t size); @@ -41,19 +28,11 @@ void ep93xx_register_spi(struct ep93xx_spi_info *info, struct spi_board_info *devices, int num); void ep93xx_register_fb(struct ep93xxfb_mach_info *data); void ep93xx_register_pwm(int pwm0, int pwm1); -int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); -void ep93xx_pwm_release_gpio(struct platform_device *pdev); void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data); -int ep93xx_keypad_acquire_gpio(struct platform_device *pdev); -void ep93xx_keypad_release_gpio(struct platform_device *pdev); void ep93xx_register_i2s(void); -int ep93xx_i2s_acquire(void); -void ep93xx_i2s_release(void); void ep93xx_register_ac97(void); void ep93xx_register_ide(void); void ep93xx_register_adc(void); -int ep93xx_ide_acquire_gpio(struct platform_device *pdev); -void ep93xx_ide_release_gpio(struct platform_device *pdev); struct device *ep93xx_init_devices(void); extern void ep93xx_timer_init(void); diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 80ccb984d521..e2658e22bba1 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ep93xx/simone.c * Simplemachines Sim.One support. @@ -7,12 +8,6 @@ * Based on the 2.6.24.7 support: * Copyright (C) 2009 Simplemachines * MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * */ #include <linux/kernel.h> @@ -27,8 +22,8 @@ #include <linux/gpio.h> #include <linux/gpio/machine.h> -#include <mach/hardware.h> -#include <mach/gpio-ep93xx.h> +#include "hardware.h" +#include "gpio-ep93xx.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -77,13 +72,15 @@ static struct spi_board_info simone_spi_devices[] __initdata = { * low between multi-message command blocks. From v1.4, it uses a GPIO instead. * v1.3 parts will still work, since the signal on SFRMOUT is automatic. */ -static int simone_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_EGPIO1, +static struct gpiod_lookup_table simone_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info simone_spi_info __initdata = { - .chipselect = simone_spi_chipselects, - .num_chipselect = ARRAY_SIZE(simone_spi_chipselects), .use_dma = 1, }; @@ -113,6 +110,7 @@ static void __init simone_init_machine(void) ep93xx_register_i2c(simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); gpiod_add_lookup_table(&simone_mmc_spi_gpio_table); + gpiod_add_lookup_table(&simone_spi_cs_gpio_table); ep93xx_register_spi(&simone_spi_info, simone_spi_devices, ARRAY_SIZE(simone_spi_devices)); simone_register_audio(); diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index cf0cb58b3454..703f25f19d51 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ep93xx/snappercl15.c * Bluewater Systems Snapper CL15 system module @@ -8,12 +9,6 @@ * NAND code adapted from driver by: * Andre Renaud <andre@bluewatersys.com> * James R. McKaskill - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * */ #include <linux/platform_device.h> @@ -25,9 +20,9 @@ #include <linux/mtd/platnand.h> -#include <mach/hardware.h> +#include "hardware.h" #include <linux/platform_data/video-ep93xx.h> -#include <mach/gpio-ep93xx.h> +#include "gpio-ep93xx.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h index d20e631164cf..f2dace1c9154 100644 --- a/arch/arm/mach-ep93xx/soc.h +++ b/arch/arm/mach-ep93xx/soc.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-ep93xx/soc.h * * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com> * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. */ #ifndef _EP93XX_SOC_H diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index c6a533699b00..582e06e104fd 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ep93xx/ts72xx.c * Technologic Systems TS72xx SBC support. * * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -22,11 +18,11 @@ #include <linux/spi/mmc_spi.h> #include <linux/mmc/host.h> #include <linux/platform_data/spi-ep93xx.h> +#include <linux/gpio/machine.h> -#include <mach/gpio-ep93xx.h> -#include <mach/hardware.h> +#include "gpio-ep93xx.h" +#include "hardware.h" #include <mach/irqs.h> -#include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -270,13 +266,15 @@ static struct spi_board_info bk3_spi_board_info[] __initdata = { * The all work is performed automatically by !SPI_FRAME (SFRM1) and * goes through CPLD */ -static int bk3_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_F(3), +static struct gpiod_lookup_table bk3_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info bk3_spi_master __initdata = { - .chipselect = bk3_spi_chipselects, - .num_chipselect = ARRAY_SIZE(bk3_spi_chipselects), .use_dma = 1, }; @@ -317,13 +315,17 @@ static struct spi_board_info ts72xx_spi_devices[] __initdata = { }, }; -static int ts72xx_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_F(2), /* DIO_17 */ +static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + /* DIO_17 */ + GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info ts72xx_spi_info __initdata = { - .chipselect = ts72xx_spi_chipselects, - .num_chipselect = ARRAY_SIZE(ts72xx_spi_chipselects), + /* Intentionally left blank */ }; static void __init ts72xx_init_machine(void) @@ -340,6 +342,7 @@ static void __init ts72xx_init_machine(void) if (board_is_ts7300()) platform_device_register(&ts73xx_fpga_device); #endif + gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table); ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices, ARRAY_SIZE(ts72xx_spi_devices)); } @@ -399,6 +402,7 @@ static void __init bk3_init_machine(void) ep93xx_register_eth(&ts72xx_eth_data, 1); + gpiod_add_lookup_table(&bk3_spi_cs_gpio_table); ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info, ARRAY_SIZE(bk3_spi_board_info)); diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 767ee64628dc..a88a1d807b32 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -1,14 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ep93xx/vision_ep9307.c * Vision Engraving Systems EP9307 SoM support. * * Copyright (C) 2008-2011 Vision Engraving Systems * H Hartley Sweeten <hsweeten@visionengravers.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -31,10 +27,10 @@ #include <sound/cs4271.h> -#include <mach/hardware.h> +#include "hardware.h" #include <linux/platform_data/video-ep93xx.h> #include <linux/platform_data/spi-ep93xx.h> -#include <mach/gpio-ep93xx.h> +#include "gpio-ep93xx.h" #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -245,15 +241,17 @@ static struct spi_board_info vision_spi_board_info[] __initdata = { }, }; -static int vision_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_EGPIO6, - EP93XX_GPIO_LINE_EGPIO7, - EP93XX_GPIO_LINE_G(2), +static struct gpiod_lookup_table vision_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + GPIO_LOOKUP_IDX("A", 6, "cs", 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("A", 7, "cs", 1, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("G", 2, "cs", 2, GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info vision_spi_master __initdata = { - .chipselect = vision_spi_chipselects, - .num_chipselect = ARRAY_SIZE(vision_spi_chipselects), .use_dma = 1, }; @@ -295,6 +293,7 @@ static void __init vision_init_machine(void) ep93xx_register_i2c(vision_i2c_info, ARRAY_SIZE(vision_i2c_info)); gpiod_add_lookup_table(&vision_spi_mmc_gpio_table); + gpiod_add_lookup_table(&vision_spi_cs_gpio_table); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, ARRAY_SIZE(vision_spi_board_info)); vision_register_i2s(); diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index b40963cf91c7..1c518b8ee520 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -106,21 +106,15 @@ config SOC_EXYNOS5420 bool "SAMSUNG EXYNOS5420" default y depends on ARCH_EXYNOS5 + select MCPM if SMP + select ARM_CCI400_PORT_CTRL + select ARM_CPU_SUSPEND config SOC_EXYNOS5800 bool "SAMSUNG EXYNOS5800" default y depends on SOC_EXYNOS5420 -config EXYNOS5420_MCPM - bool "Exynos5420 Multi-Cluster PM support" - depends on MCPM && SOC_EXYNOS5420 - select ARM_CCI400_PORT_CTRL - select ARM_CPU_SUSPEND - help - This is needed to provide CPU and cluster power management - on Exynos5420 implementing big.LITTLE. - config EXYNOS_CPU_SUSPEND bool select ARM_CPU_SUSPEND diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index cd00c82a1add..264dbaa89c3d 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -18,5 +18,5 @@ plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec) -obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o +obj-$(CONFIG_MCPM) += mcpm-exynos.o CFLAGS_mcpm-exynos.o += -march=armv7-a diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 1b8699e94098..c93356a8d662 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -91,6 +91,7 @@ extern u32 cp15_save_power; extern void __iomem *sysram_ns_base_addr; extern void __iomem *sysram_base_addr; +extern phys_addr_t sysram_base_phys; extern void __iomem *pmu_base_addr; void exynos_sysram_init(void); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 865dcc4c3181..9aa483366ebc 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -33,6 +33,7 @@ static struct platform_device exynos_cpuidle = { }; void __iomem *sysram_base_addr __ro_after_init; +phys_addr_t sysram_base_phys __ro_after_init; void __iomem *sysram_ns_base_addr __ro_after_init; void __init exynos_sysram_init(void) @@ -43,6 +44,8 @@ void __init exynos_sysram_init(void) if (!of_device_is_available(node)) continue; sysram_base_addr = of_iomap(node, 0); + sysram_base_phys = of_translate_address(node, + of_get_address(node, 0, NULL, NULL)); break; } diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index d602e3bf3f96..2eaf2dbb8e81 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -196,6 +196,7 @@ bool __init exynos_secure_firmware_available(void) return false; addr = of_get_address(nd, 0, NULL, NULL); + of_node_put(nd); if (!addr) { pr_err("%s: No address specified.\n", __func__); return false; diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S index 005695c9bf40..0ac2cb9a7355 100644 --- a/arch/arm/mach-exynos/headsmp.S +++ b/arch/arm/mach-exynos/headsmp.S @@ -36,4 +36,4 @@ ENDPROC(exynos4_secondary_startup) .align 2 1: .long . - .long pen_release + .long exynos_pen_release diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index 72bc035bedbe..9a681b421ae1 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -75,14 +75,25 @@ static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster) */ if (cluster && cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) { + unsigned int timeout = 16; + /* * Before we reset the Little cores, we should wait * the SPARE2 register is set to 1 because the init * codes of the iROM will set the register after * initialization. */ - while (!pmu_raw_readl(S5P_PMU_SPARE2)) + while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) { + timeout--; udelay(10); + } + + if (timeout == 0) { + pr_err("cpu %u cluster %u powerup failed\n", + cpu, cluster); + exynos_cpu_power_down(cpunr); + return -ETIMEDOUT; + } pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu), EXYNOS_SWRESET); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index c39ffd2e2fe6..0cbbae8bf1f8 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -28,6 +28,9 @@ extern void exynos4_secondary_startup(void); +/* XXX exynos_pen_release is cargo culted code - DO NOT COPY XXX */ +volatile int exynos_pen_release = -1; + #ifdef CONFIG_HOTPLUG_CPU static inline void cpu_leave_lowpower(u32 core_id) { @@ -57,7 +60,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) wfi(); - if (pen_release == core_id) { + if (exynos_pen_release == core_id) { /* * OK, proper wakeup, we're done */ @@ -211,13 +214,20 @@ static inline void __iomem *cpu_boot_reg(int cpu) */ void exynos_core_restart(u32 core_id) { + unsigned int timeout = 16; u32 val; if (!of_machine_is_compatible("samsung,exynos3250")) return; - while (!pmu_raw_readl(S5P_PMU_SPARE2)) + while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) { + timeout--; udelay(10); + } + if (timeout == 0) { + pr_err("cpu core %u restart failed\n", core_id); + return; + } udelay(10); val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id)); @@ -228,15 +238,17 @@ void exynos_core_restart(u32 core_id) } /* - * Write pen_release in a way that is guaranteed to be visible to all - * observers, irrespective of whether they're taking part in coherency + * XXX CARGO CULTED CODE - DO NOT COPY XXX + * + * Write exynos_pen_release in a way that is guaranteed to be visible to + * all observers, irrespective of whether they're taking part in coherency * or not. This is necessary for the hotplug code to work reliably. */ -static void write_pen_release(int val) +static void exynos_write_pen_release(int val) { - pen_release = val; + exynos_pen_release = val; smp_wmb(); - sync_cache_w(&pen_release); + sync_cache_w(&exynos_pen_release); } static DEFINE_SPINLOCK(boot_lock); @@ -247,7 +259,7 @@ static void exynos_secondary_init(unsigned int cpu) * let the primary processor know we're out of the * pen, then head off into the C entry point */ - write_pen_release(-1); + exynos_write_pen_release(-1); /* * Synchronise with the boot thread. @@ -322,12 +334,12 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) /* * The secondary processor is waiting to be released from * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. + * that it has been released by resetting exynos_pen_release. * - * Note that "pen_release" is the hardware CPU core ID, whereas + * Note that "exynos_pen_release" is the hardware CPU core ID, whereas * "cpu" is Linux's internal ID. */ - write_pen_release(core_id); + exynos_write_pen_release(core_id); if (!exynos_cpu_power_state(core_id)) { exynos_cpu_power_up(core_id); @@ -336,9 +348,9 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) /* wait max 10 ms until cpu1 is on */ while (exynos_cpu_power_state(core_id) != S5P_CORE_LOCAL_PWR_EN) { - if (timeout-- == 0) + if (timeout == 0) break; - + timeout--; mdelay(1); } @@ -376,13 +388,13 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) else arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - if (pen_release == -1) + if (exynos_pen_release == -1) break; udelay(10); } - if (pen_release != -1) + if (exynos_pen_release != -1) ret = -ETIMEDOUT; /* @@ -392,7 +404,7 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) fail: spin_unlock(&boot_lock); - return pen_release != -1 ? ret : 0; + return exynos_pen_release != -1 ? ret : 0; } static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-exynos/smc.h b/arch/arm/mach-exynos/smc.h index f355185d4239..98832e50852d 100644 --- a/arch/arm/mach-exynos/smc.h +++ b/arch/arm/mach-exynos/smc.h @@ -25,6 +25,13 @@ #define SMC_CMD_L2X0INVALL (-24) #define SMC_CMD_L2X0DEBUG (-25) +/* For Accessing CP15/SFR (General) */ +#define SMC_CMD_REG (-101) + +/* defines for SMC_CMD_REG */ +#define SMC_REG_CLASS_SFR_W (0x1 << 30) +#define SMC_REG_ID_SFR_W(addr) (SMC_REG_CLASS_SFR_W | ((addr) >> 2)) + #ifndef __ASSEMBLY__ extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3); diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 0850505ac78b..be122af0de8f 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -31,6 +31,7 @@ #include <asm/suspend.h> #include "common.h" +#include "smc.h" #define REG_TABLE_END (-1U) @@ -62,6 +63,8 @@ struct exynos_pm_state { int cpu_state; unsigned int pmu_spare3; void __iomem *sysram_base; + phys_addr_t sysram_phys; + bool secure_firmware; }; static const struct exynos_pm_data *pm_data __ro_after_init; @@ -265,9 +268,7 @@ static int exynos5420_cpu_suspend(unsigned long arg) unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE); - - if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) { + if (IS_ENABLED(CONFIG_MCPM)) { mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume); mcpm_cpu_suspend(); } @@ -341,11 +342,16 @@ static void exynos5420_pm_prepare(void) */ pm_state.cpu_state = readl_relaxed(pm_state.sysram_base + EXYNOS5420_CPU_STATE); + writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE); + if (pm_state.secure_firmware) + exynos_smc(SMC_CMD_REG, SMC_REG_ID_SFR_W(pm_state.sysram_phys + + EXYNOS5420_CPU_STATE), + 0, 0); exynos_pm_enter_sleep_mode(); /* ensure at least INFORM0 has the resume address */ - if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) + if (IS_ENABLED(CONFIG_MCPM)) pmu_raw_writel(__pa_symbol(mcpm_entry_point), S5P_INFORM0); tmp = pmu_raw_readl(EXYNOS_L2_OPTION(0)); @@ -444,8 +450,27 @@ early_wakeup: static void exynos5420_prepare_pm_resume(void) { - if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) + unsigned int mpidr, cluster; + + mpidr = read_cpuid_mpidr(); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + if (IS_ENABLED(CONFIG_MCPM)) WARN_ON(mcpm_cpu_powered_up()); + + if (IS_ENABLED(CONFIG_HW_PERF_EVENTS) && cluster != 0) { + /* + * When system is resumed on the LITTLE/KFC core (cluster 1), + * the DSCR is not properly updated until the power is turned + * on also for the cluster 0. Enable it for a while to + * propagate the SPNIDEN and SPIDEN signals from Secure JTAG + * block and avoid undefined instruction issue on CP14 reset. + */ + pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN, + EXYNOS_COMMON_CONFIGURATION(0)); + pmu_raw_writel(0, + EXYNOS_COMMON_CONFIGURATION(0)); + } } static void exynos5420_pm_resume(void) @@ -460,6 +485,11 @@ static void exynos5420_pm_resume(void) /* Restore the sysram cpu state register */ writel_relaxed(pm_state.cpu_state, pm_state.sysram_base + EXYNOS5420_CPU_STATE); + if (pm_state.secure_firmware) + exynos_smc(SMC_CMD_REG, + SMC_REG_ID_SFR_W(pm_state.sysram_phys + + EXYNOS5420_CPU_STATE), + EXYNOS_AFTR_MAGIC, 0); pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION); @@ -639,8 +669,10 @@ void __init exynos_pm_init(void) if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) { pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); + of_node_put(np); return; } + of_node_put(np); pm_data = (const struct exynos_pm_data *) match->data; @@ -659,8 +691,11 @@ void __init exynos_pm_init(void) * Applicable as of now only to Exynos542x. If booted under secure * firmware, the non-secure region of sysram should be used. */ - if (exynos_secure_firmware_available()) + if (exynos_secure_firmware_available()) { + pm_state.sysram_phys = sysram_base_phys; pm_state.sysram_base = sysram_ns_base_addr; - else + pm_state.secure_firmware = true; + } else { pm_state.sysram_base = sysram_base_addr; + } } diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index 816a5b89be25..1730ee809869 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only if ARCH_FOOTBRIDGE menu "Footbridge Implementations" diff --git a/arch/arm/mach-footbridge/Makefile.boot b/arch/arm/mach-footbridge/Makefile.boot index ff0a4b5b0a82..e4313e912cac 100644 --- a/arch/arm/mach-footbridge/Makefile.boot +++ b/arch/arm/mach-footbridge/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 0f0c9e040fcc..015f75d1c98d 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-footbridge/common.c * * Copyright (C) 1998-2000 Russell King, Dave Gilbert. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> #include <linux/types.h> diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 16d71bac0061..8b81a17f675d 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/dec21285.c: PCI functions for DC21285 * * Copyright (C) 1998-2001 Russell King * Copyright (C) 1998-2000 Phil Blundell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/pci.h> diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h index 20d5ad781fe2..ecaf6e7388d9 100644 --- a/arch/arm/mach-footbridge/include/mach/hardware.h +++ b/arch/arm/mach-footbridge/include/mach/hardware.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-footbridge/include/mach/hardware.h * * Copyright (C) 1998-1999 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file contains the hardware definitions of the EBSA-285. */ #ifndef __ASM_ARCH_HARDWARE_H diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h index aba46388cc0c..4e18b921373f 100644 --- a/arch/arm/mach-footbridge/include/mach/io.h +++ b/arch/arm/mach-footbridge/include/mach/io.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-footbridge/include/mach/io.h * * Copyright (C) 1997-1999 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Modifications: * 06-12-1997 RMK Created. * 07-04-1999 RMK Major cleanup diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h index 6f2ecccdf323..46fd4a8872b9 100644 --- a/arch/arm/mach-footbridge/include/mach/memory.h +++ b/arch/arm/mach-footbridge/include/mach/memory.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-footbridge/include/mach/memory.h * * Copyright (C) 1996-1999 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Changelog: * 20-Oct-1996 RMK Created * 31-Dec-1997 RMK Fixed definitions to reduce warnings. diff --git a/arch/arm/mach-footbridge/include/mach/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h index a69398c05a52..28b577e29db3 100644 --- a/arch/arm/mach-footbridge/include/mach/uncompress.h +++ b/arch/arm/mach-footbridge/include/mach/uncompress.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-footbridge/include/mach/uncompress.h * * Copyright (C) 1996-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <asm/mach-types.h> diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c index c01fca11b224..88a553932c33 100644 --- a/arch/arm/mach-footbridge/isa-irq.c +++ b/arch/arm/mach-footbridge/isa-irq.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-footbridge/irq.c * * Copyright (C) 1996-2000 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Changelog: * 22-Aug-1998 RMK Restructured IRQ routines * 03-Sep-1998 PJB Merged CATS support diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c index 4d9276c27d6f..ec5af521cf95 100644 --- a/arch/arm/mach-footbridge/isa.c +++ b/arch/arm/mach-footbridge/isa.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-footbridge/isa.c * * Copyright (C) 2004 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/serial_8250.h> diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig index 70106b67631c..969674ea5f17 100644 --- a/arch/arm/mach-gemini/Kconfig +++ b/arch/arm/mach-gemini/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_GEMINI bool "Cortina Systems Gemini" depends on ARCH_MULTI_V4 diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile index ca0db5477180..997a0be844e2 100644 --- a/arch/arm/mach-gemini/Makefile +++ b/arch/arm/mach-gemini/Makefile @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only # Makefile for Cortina systems Gemini obj-y := board-dt.o diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 5552968f07f8..1bc68913d62c 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only config ARCH_HIGHBANK bool "Calxeda ECX-1000/2000 (Highbank/Midway)" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index 55840f414d3e..7e6732c16862 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-y := highbank.o system.o smc.o plus_sec := $(call as-instr,.arch_extension sec,+sec) diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 07f60986dc2c..56bf29523c65 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2010-2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/clk.h> #include <linux/clkdev.h> diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c index 400311695548..561941baeda9 100644 --- a/arch/arm/mach-highbank/pm.c +++ b/arch/arm/mach-highbank/pm.c @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/cpu_pm.h> diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S index 407d17baaaa9..b16c0442e812 100644 --- a/arch/arm/mach-highbank/smc.S +++ b/arch/arm/mach-highbank/smc.S @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc. * Copyright 2012 Calxeda, Inc. - * - * This program is free software,you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h index 5995df7f2622..3c13fdcafb1e 100644 --- a/arch/arm/mach-highbank/sysregs.h +++ b/arch/arm/mach-highbank/sysregs.h @@ -1,17 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef _MACH_HIGHBANK__SYSREGS_H_ #define _MACH_HIGHBANK__SYSREGS_H_ diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c index 2df5870b7583..b749c4a6ddf5 100644 --- a/arch/arm/mach-highbank/system.c +++ b/arch/arm/mach-highbank/system.c @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/io.h> #include <asm/proc-fns.h> diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 65a048fa08ec..98338a489921 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only config ARCH_HISI bool "Hisilicon SoC Support" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile index 659db1933ed3..39476355e568 100644 --- a/arch/arm/mach-hisi/Makefile +++ b/arch/arm/mach-hisi/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for Hisilicon processors family # diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c index c08c44ec5175..07ea28b99cd0 100644 --- a/arch/arm/mach-hisi/hisilicon.c +++ b/arch/arm/mach-hisi/hisilicon.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * (Hisilicon's SoC based) flattened device tree enabled machine * @@ -5,10 +6,6 @@ * Copyright (c) 2012-2013 Linaro Ltd. * * Author: Haojian Zhuang <haojian.zhuang@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/clocksource.h> diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c index 909bb2493781..5c5f255abc3a 100644 --- a/arch/arm/mach-hisi/hotplug.c +++ b/arch/arm/mach-hisi/hotplug.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013 Linaro Ltd. * Copyright (c) 2013 Hisilicon Limited. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. */ #include <linux/cpu.h> diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c index f66815c3dd07..f155e32f8420 100644 --- a/arch/arm/mach-hisi/platmcpm.c +++ b/arch/arm/mach-hisi/platmcpm.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013-2014 Linaro Ltd. * Copyright (c) 2013-2014 Hisilicon Limited. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/smp.h> diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c index da5689ababf7..da7a09c1dae5 100644 --- a/arch/arm/mach-hisi/platsmp.c +++ b/arch/arm/mach-hisi/platsmp.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013 Linaro Ltd. * Copyright (c) 2013 Hisilicon Limited. * Based on arch/arm/mach-vexpress/platsmp.c, Copyright (C) 2002 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. */ #include <linux/smp.h> #include <linux/io.h> diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c index 0015abe9cb2b..0e018000715a 100644 --- a/arch/arm/mach-imx/3ds_debugboard.c +++ b/arch/arm/mach-imx/3ds_debugboard.c @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/interrupt.h> diff --git a/arch/arm/mach-imx/3ds_debugboard.h b/arch/arm/mach-imx/3ds_debugboard.h index 9fd6cb3f8fad..a4d04d099c61 100644 --- a/arch/arm/mach-imx/3ds_debugboard.h +++ b/arch/arm/mach-imx/3ds_debugboard.h @@ -1,13 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. - * - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifndef __ASM_ARCH_MXC_3DS_DB_H__ diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 9b8d4d6aa763..593bf1519608 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MXC bool "Freescale i.MX family" depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 8af2f7e91d13..35ff620537e6 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -29,9 +29,10 @@ obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sx.o obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o +obj-$(CONFIG_SOC_IMX7ULP) += cpuidle-imx7ulp.o endif -ifdef CONFIG_SND_IMX_SOC +ifdef CONFIG_SND_SOC_IMX_PCM_FIQ obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o endif diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 45d618abf26b..777d8c255501 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2013-2015 Freescale Semiconductor, Inc. * Copyright 2017-2018 NXP. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/err.h> diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index c0434a36687a..322caa21bcb3 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #include <linux/module.h> diff --git a/arch/arm/mach-imx/board-mx31lilly.h b/arch/arm/mach-imx/board-mx31lilly.h index 0df71bfefbb1..3508c598c588 100644 --- a/arch/arm/mach-imx/board-mx31lilly.h +++ b/arch/arm/mach-imx/board-mx31lilly.h @@ -1,22 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> * * Based on code for mobots boards, * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ diff --git a/arch/arm/mach-imx/board-mx31lite.h b/arch/arm/mach-imx/board-mx31lite.h index c1ad0ae807cc..7d7c6219b25f 100644 --- a/arch/arm/mach-imx/board-mx31lite.h +++ b/arch/arm/mach-imx/board-mx31lite.h @@ -1,23 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> * * Based on code for mobots boards, * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ diff --git a/arch/arm/mach-imx/board-mx31moboard.h b/arch/arm/mach-imx/board-mx31moboard.h index de14543891cf..6f3ff4d4ebc1 100644 --- a/arch/arm/mach-imx/board-mx31moboard.h +++ b/arch/arm/mach-imx/board-mx31moboard.h @@ -1,19 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index bc915e5b4d56..912aeceb4ff8 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2004-2014 Freescale Semiconductor, Inc. All Rights Reserved. */ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ #ifndef __ASM_ARCH_MXC_COMMON_H__ #define __ASM_ARCH_MXC_COMMON_H__ @@ -72,6 +68,15 @@ enum mxc_cpu_pwr_mode { STOP_POWER_OFF, /* STOP + SRPG */ }; +enum ulp_cpu_pwr_mode { + ULP_PM_HSRUN, /* High speed run mode */ + ULP_PM_RUN, /* Run mode */ + ULP_PM_WAIT, /* Wait mode */ + ULP_PM_STOP, /* Stop mode */ + ULP_PM_VLPS, /* Very low power stop mode */ + ULP_PM_VLLS, /* very low leakage stop mode */ +}; + void imx_enable_cpu(int cpu, bool enable); void imx_set_cpu_jump(int cpu, void *jump_addr); u32 imx_get_cpu_arg(int cpu); @@ -98,6 +103,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode); void imx6_set_int_mem_clk_lpm(bool enable); void imx6sl_set_wait_clk(bool enter); int imx_mmdc_get_ddr_type(void); +int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode); void imx_cpu_die(unsigned int cpu); int imx_cpu_kill(unsigned int cpu); diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c index d0ad67e802d3..b2e1963f473d 100644 --- a/arch/arm/mach-imx/cpu-imx25.c +++ b/arch/arm/mach-imx/cpu-imx25.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * MX25 CPU type detection * * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/module.h> #include <linux/io.h> diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c index 8d2ae4091465..a969aa71b60f 100644 --- a/arch/arm/mach-imx/cpu-imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ /* diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c index 3daf1959a2f0..3ee684b71006 100644 --- a/arch/arm/mach-imx/cpu-imx31.c +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * MX31 CPU type detection * * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/module.h> diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c index 8a54234df23b..ebb3cdabd506 100644 --- a/arch/arm/mach-imx/cpu-imx35.c +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * MX35 CPU type detection * * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/module.h> #include <linux/io.h> diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index e210bac18840..ad56263778f9 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - * * This file contains the CPU initialization code. */ diff --git a/arch/arm/mach-imx/cpuidle-imx5.c b/arch/arm/mach-imx/cpuidle-imx5.c index db0127606aed..a8457c4eb99a 100644 --- a/arch/arm/mach-imx/cpuidle-imx5.c +++ b/arch/arm/mach-imx/cpuidle-imx5.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/cpuidle.h> diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index bfeb25aaf9a2..a2441ed6b673 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/cpuidle.h> @@ -16,30 +13,23 @@ #include "cpuidle.h" #include "hardware.h" -static atomic_t master = ATOMIC_INIT(0); -static DEFINE_SPINLOCK(master_lock); +static int num_idle_cpus = 0; +static DEFINE_SPINLOCK(cpuidle_lock); static int imx6q_enter_wait(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - if (atomic_inc_return(&master) == num_online_cpus()) { - /* - * With this lock, we prevent other cpu to exit and enter - * this function again and become the master. - */ - if (!spin_trylock(&master_lock)) - goto idle; + spin_lock(&cpuidle_lock); + if (++num_idle_cpus == num_online_cpus()) imx6_set_lpm(WAIT_UNCLOCKED); - cpu_do_idle(); - imx6_set_lpm(WAIT_CLOCKED); - spin_unlock(&master_lock); - goto done; - } + spin_unlock(&cpuidle_lock); -idle: cpu_do_idle(); -done: - atomic_dec(&master); + + spin_lock(&cpuidle_lock); + if (num_idle_cpus-- == num_online_cpus()) + imx6_set_lpm(WAIT_CLOCKED); + spin_unlock(&cpuidle_lock); return index; } diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c index 8d866fb674a8..4521e5352bf6 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sl.c +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/cpuidle.h> diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c index fd0053e47a15..74ea1720e3d8 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sx.c +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/cpuidle.h> @@ -15,6 +12,7 @@ #include "common.h" #include "cpuidle.h" +#include "hardware.h" static int imx6sx_idle_finish(unsigned long val) { @@ -110,7 +108,7 @@ int __init imx6sx_cpuidle_init(void) * except for power up sw2iso which need to be * larger than LDO ramp up time. */ - imx_gpc_set_arm_power_up_timing(0xf, 1); + imx_gpc_set_arm_power_up_timing(cpu_is_imx6sx() ? 0xf : 0x2, 1); imx_gpc_set_arm_power_down_timing(1, 1); return cpuidle_register(&imx6sx_cpuidle_driver, NULL); diff --git a/arch/arm/mach-imx/cpuidle-imx7ulp.c b/arch/arm/mach-imx/cpuidle-imx7ulp.c new file mode 100644 index 000000000000..ca86c967d19e --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx7ulp.c @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Anson Huang <Anson.Huang@nxp.com> + */ + +#include <linux/cpuidle.h> +#include <linux/module.h> +#include <asm/cpuidle.h> + +#include "common.h" +#include "cpuidle.h" + +static int imx7ulp_enter_wait(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + if (index == 1) + imx7ulp_set_lpm(ULP_PM_WAIT); + else + imx7ulp_set_lpm(ULP_PM_STOP); + + cpu_do_idle(); + + imx7ulp_set_lpm(ULP_PM_RUN); + + return index; +} + +static struct cpuidle_driver imx7ulp_cpuidle_driver = { + .name = "imx7ulp_cpuidle", + .owner = THIS_MODULE, + .states = { + /* WFI */ + ARM_CPUIDLE_WFI_STATE, + /* WAIT */ + { + .exit_latency = 50, + .target_residency = 75, + .enter = imx7ulp_enter_wait, + .name = "WAIT", + .desc = "PSTOP2", + }, + /* STOP */ + { + .exit_latency = 100, + .target_residency = 150, + .enter = imx7ulp_enter_wait, + .name = "STOP", + .desc = "PSTOP1", + }, + }, + .state_count = 3, + .safe_state_index = 0, +}; + +int __init imx7ulp_cpuidle_init(void) +{ + return cpuidle_register(&imx7ulp_cpuidle_driver, NULL); +} diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h index f9140128ba05..ce552c096cae 100644 --- a/arch/arm/mach-imx/cpuidle.h +++ b/arch/arm/mach-imx/cpuidle.h @@ -1,13 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2012 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifdef CONFIG_CPU_IDLE @@ -15,6 +9,7 @@ extern int imx5_cpuidle_init(void); extern int imx6q_cpuidle_init(void); extern int imx6sl_cpuidle_init(void); extern int imx6sx_cpuidle_init(void); +extern int imx7ulp_cpuidle_init(void); #else static inline int imx5_cpuidle_init(void) { @@ -32,4 +27,8 @@ static inline int imx6sx_cpuidle_init(void) { return 0; } +static inline int imx7ulp_cpuidle_init(void) +{ + return 0; +} #endif diff --git a/arch/arm/mach-imx/crmregs-imx3.h b/arch/arm/mach-imx/crmregs-imx3.h index a1dfde53e335..3e6951eee51c 100644 --- a/arch/arm/mach-imx/crmregs-imx3.h +++ b/arch/arm/mach-imx/crmregs-imx3.h @@ -1,20 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __ARCH_ARM_MACH_MX3_CRM_REGS_H__ diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h index bd9393280159..3679d1de84d4 100644 --- a/arch/arm/mach-imx/devices-imx21.h +++ b/arch/arm/mach-imx/devices-imx21.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "devices/devices-common.h" diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 130962519751..f89f4ae0e1ca 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "devices/devices-common.h" diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h index e8d1611bbc8e..5a4ba35a47ed 100644 --- a/arch/arm/mach-imx/devices-imx31.h +++ b/arch/arm/mach-imx/devices-imx31.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "devices/devices-common.h" diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h index 780d8240281b..1b1bdadea15b 100644 --- a/arch/arm/mach-imx/devices-imx35.h +++ b/arch/arm/mach-imx/devices-imx35.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "devices/devices-common.h" diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 6ffe57267233..fdca73d117e6 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only config IMX_HAVE_PLATFORM_FEC bool default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35 diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 6920e356f4e5..2a685adec1df 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2009-2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include <linux/kernel.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c index 300451727362..cd72f0894196 100644 --- a/arch/arm/mach-imx/devices/devices.c +++ b/arch/arm/mach-imx/devices/devices.c @@ -1,19 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c index b403a4fe2892..88e853d7fb01 100644 --- a/arch/arm/mach-imx/devices/platform-fec.c +++ b/arch/arm/mach-imx/devices/platform-fec.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include <linux/dma-mapping.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-flexcan.c b/arch/arm/mach-imx/devices/platform-flexcan.c index 8a1a2fc4ce10..e4eed35c1fe2 100644 --- a/arch/arm/mach-imx/devices/platform-flexcan.c +++ b/arch/arm/mach-imx/devices/platform-flexcan.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c index 25e1de6f3a47..cc86de4d7acb 100644 --- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include <linux/dma-mapping.h> diff --git a/arch/arm/mach-imx/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c index cd1fe69d8807..78628ef12672 100644 --- a/arch/arm/mach-imx/devices/platform-gpio-mxc.c +++ b/arch/arm/mach-imx/devices/platform-gpio-mxc.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2011 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "devices-common.h" #include "../common.h" diff --git a/arch/arm/mach-imx/devices/platform-gpio_keys.c b/arch/arm/mach-imx/devices/platform-gpio_keys.c index 486282539c76..488678403ac8 100644 --- a/arch/arm/mach-imx/devices/platform-gpio_keys.c +++ b/arch/arm/mach-imx/devices/platform-gpio_keys.c @@ -1,21 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. */ -#include <asm/sizes.h> +#include <linux/sizes.h> #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c index ccdb5dc4ddbd..26b47b36257b 100644 --- a/arch/arm/mach-imx/devices/platform-imx-dma.c +++ b/arch/arm/mach-imx/devices/platform-imx-dma.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index aa00272252e0..e553d014506a 100644 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include <linux/dma-mapping.h> diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c index 9822bedb5d09..81d317bfadd8 100644 --- a/arch/arm/mach-imx/devices/platform-imx-i2c.c +++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2009-2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c index 479e4d70dbf9..de2e03ec2d89 100644 --- a/arch/arm/mach-imx/devices/platform-imx-keypad.c +++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c index 6f0e94eb29ee..ed8c66438af0 100644 --- a/arch/arm/mach-imx/devices/platform-imx-ssi.c +++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c index e3c89e9caf93..c8f01deedd80 100644 --- a/arch/arm/mach-imx/devices/platform-imx-uart.c +++ b/arch/arm/mach-imx/devices/platform-imx-uart.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2009-2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c index 8c134c8d7500..fdd355ae4d5f 100644 --- a/arch/arm/mach-imx/devices/platform-imx2-wdt.c +++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ -#include <asm/sizes.h> +#include <linux/sizes.h> #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-imx21-hcd.c b/arch/arm/mach-imx/devices/platform-imx21-hcd.c index 30c81616a9a1..f55763c36d26 100644 --- a/arch/arm/mach-imx/devices/platform-imx21-hcd.c +++ b/arch/arm/mach-imx/devices/platform-imx21-hcd.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-imx27-coda.c b/arch/arm/mach-imx/devices/platform-imx27-coda.c index 25bebc29e546..66a116e6c6bc 100644 --- a/arch/arm/mach-imx/devices/platform-imx27-coda.c +++ b/arch/arm/mach-imx/devices/platform-imx27-coda.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Vista Silicon * Javier Martin <javier.martin@vista-silicon.com> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "../hardware.h" diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c index 6bd7c3f37ac0..b4290760f49f 100644 --- a/arch/arm/mach-imx/devices/platform-ipu-core.c +++ b/arch/arm/mach-imx/devices/platform-ipu-core.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include <linux/dma-mapping.h> diff --git a/arch/arm/mach-imx/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c index 4c377c33242c..5375f8b3d079 100644 --- a/arch/arm/mach-imx/devices/platform-mx2-camera.c +++ b/arch/arm/mach-imx/devices/platform-mx2-camera.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c index 0dc0651825b1..20f28ba16f36 100644 --- a/arch/arm/mach-imx/devices/platform-mx2-emma.c +++ b/arch/arm/mach-imx/devices/platform-mx2-emma.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c index 4537abd2a8f2..d9d7cc71633f 100644 --- a/arch/arm/mach-imx/devices/platform-mxc-ehci.c +++ b/arch/arm/mach-imx/devices/platform-mxc-ehci.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include <linux/dma-mapping.h> diff --git a/arch/arm/mach-imx/devices/platform-mxc-mmc.c b/arch/arm/mach-imx/devices/platform-mxc-mmc.c index b8203c760c8f..cd4c502bc152 100644 --- a/arch/arm/mach-imx/devices/platform-mxc-mmc.c +++ b/arch/arm/mach-imx/devices/platform-mxc-mmc.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include <linux/dma-mapping.h> diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c index 676df4920c7b..0f5f741f897f 100644 --- a/arch/arm/mach-imx/devices/platform-mxc_nand.c +++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2009-2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ -#include <asm/sizes.h> +#include <linux/sizes.h> #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-mxc_rtc.c b/arch/arm/mach-imx/devices/platform-mxc_rtc.c index c7fffaadf847..0c746de1dd1d 100644 --- a/arch/arm/mach-imx/devices/platform-mxc_rtc.c +++ b/arch/arm/mach-imx/devices/platform-mxc_rtc.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010-2011 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-mxc_w1.c b/arch/arm/mach-imx/devices/platform-mxc_w1.c index 88c18b720d63..ab42c6b0542c 100644 --- a/arch/arm/mach-imx/devices/platform-mxc_w1.c +++ b/arch/arm/mach-imx/devices/platform-mxc_w1.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-pata_imx.c b/arch/arm/mach-imx/devices/platform-pata_imx.c index 1c7f895a69d2..0e985fffba78 100644 --- a/arch/arm/mach-imx/devices/platform-pata_imx.c +++ b/arch/arm/mach-imx/devices/platform-pata_imx.c @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c index 466c9ccc6675..40c261071144 100644 --- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include <linux/platform_data/mmc-esdhc-imx.h> diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c index d93c446c9c02..f2cafa52c187 100644 --- a/arch/arm/mach-imx/devices/platform-spi_imx.c +++ b/arch/arm/mach-imx/devices/platform-spi_imx.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2009-2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include "../hardware.h" #include "devices-common.h" diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c index c56974346c16..83962ce75983 100644 --- a/arch/arm/mach-imx/ehci-imx27.c +++ b/arch/arm/mach-imx/ehci-imx27.c @@ -1,16 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c index bede21d9b981..d6d794d53a63 100644 --- a/arch/arm/mach-imx/ehci-imx31.c +++ b/arch/arm/mach-imx/ehci-imx31.c @@ -1,16 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index f424a543755c..e6ba965c5c5b 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -1,16 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index e11159d40fb8..b5b557fe2c49 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2011-2013 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/io.h> diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 90e10cbd8fd1..92c5a9c9f94b 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -1,20 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2004-2007, 2014 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __ASM_ARCH_MXC_HARDWARE_H__ @@ -24,7 +11,7 @@ #include <asm/io.h> #include <soc/imx/revision.h> #endif -#include <asm/sizes.h> +#include <linux/sizes.h> #define addr_in_module(addr, mod) \ ((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE) diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 6c28d28b3c64..766dbdb2ae27 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -1,13 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/linkage.h> diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index b35e99cc5e5b..089d11ffaa3e 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/errno.h> diff --git a/arch/arm/mach-imx/iim.h b/arch/arm/mach-imx/iim.h index 315bffadafda..72c3bca898f5 100644 --- a/arch/arm/mach-imx/iim.h +++ b/arch/arm/mach-imx/iim.h @@ -1,20 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __ASM_ARCH_MXC_IIM_H__ diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index a754b8a48f38..29d97bd64381 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Sascha Hauer, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/irq.h> diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index 9d9640aaf858..dc69dfe600df 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Sascha Hauer, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <asm/mach/arch.h> diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c index 99bb63dedb87..ec5c3068715c 100644 --- a/arch/arm/mach-imx/imx35-dt.c +++ b/arch/arm/mach-imx/imx35-dt.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2012 Steffen Trumtrar, Pengutronix * * based on imx27-dt.c - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. */ #include <linux/irq.h> diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index 3982e91b2f3e..abfc306655c8 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -1,21 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #include <linux/gpio.h> #include <linux/module.h> diff --git a/arch/arm/mach-imx/iomux-mx21.h b/arch/arm/mach-imx/iomux-mx21.h index a70cffceb085..6eab3478fb80 100644 --- a/arch/arm/mach-imx/iomux-mx21.h +++ b/arch/arm/mach-imx/iomux-mx21.h @@ -1,19 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __MACH_IOMUX_MX21_H__ #define __MACH_IOMUX_MX21_H__ diff --git a/arch/arm/mach-imx/iomux-mx27.h b/arch/arm/mach-imx/iomux-mx27.h index 218e99e89e86..4d848d1ef1e3 100644 --- a/arch/arm/mach-imx/iomux-mx27.h +++ b/arch/arm/mach-imx/iomux-mx27.h @@ -1,20 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __MACH_IOMUX_MX27_H__ #define __MACH_IOMUX_MX27_H__ diff --git a/arch/arm/mach-imx/iomux-mx2x.h b/arch/arm/mach-imx/iomux-mx2x.h index 7a9b20abda09..ce6b6d20a4f0 100644 --- a/arch/arm/mach-imx/iomux-mx2x.h +++ b/arch/arm/mach-imx/iomux-mx2x.h @@ -1,20 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __MACH_IOMUX_MX2x_H__ #define __MACH_IOMUX_MX2x_H__ diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h index 368667b32760..99270a183d47 100644 --- a/arch/arm/mach-imx/iomux-mx3.h +++ b/arch/arm/mach-imx/iomux-mx3.h @@ -1,20 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __MACH_IOMUX_MX3_H__ #define __MACH_IOMUX_MX3_H__ diff --git a/arch/arm/mach-imx/iomux-mx35.h b/arch/arm/mach-imx/iomux-mx35.h index 90bfa6b5be6a..7fb5259b3ee0 100644 --- a/arch/arm/mach-imx/iomux-mx35.h +++ b/arch/arm/mach-imx/iomux-mx35.h @@ -1,19 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option, NO_PAD_CTRL) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __MACH_IOMUX_MX35_H__ diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c index 7aa90c863ad9..a4bec3b9b2b3 100644 --- a/arch/arm/mach-imx/iomux-v1.c +++ b/arch/arm/mach-imx/iomux-v1.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/plat-mxc/iomux-v1.c * @@ -5,20 +6,6 @@ * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix * * Common code for i.MX1, i.MX21 and i.MX27 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/errno.h> diff --git a/arch/arm/mach-imx/iomux-v1.h b/arch/arm/mach-imx/iomux-v1.h index 02651a40fe23..b94852970c7f 100644 --- a/arch/arm/mach-imx/iomux-v1.h +++ b/arch/arm/mach-imx/iomux-v1.h @@ -1,20 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __MACH_IOMUX_V1_H__ #define __MACH_IOMUX_V1_H__ diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c index ca59d5f2ec92..043cf3c7cacf 100644 --- a/arch/arm/mach-imx/iomux-v3.c +++ b/arch/arm/mach-imx/iomux-v3.c @@ -1,22 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, * <armlinux@phytec.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #include <linux/errno.h> #include <linux/init.h> diff --git a/arch/arm/mach-imx/iomux-v3.h b/arch/arm/mach-imx/iomux-v3.h index f79e165a3b3c..7db8ec926ff1 100644 --- a/arch/arm/mach-imx/iomux-v3.h +++ b/arch/arm/mach-imx/iomux-v3.h @@ -1,20 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, * <armlinux@phytec.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __MACH_IOMUX_V3_H__ diff --git a/arch/arm/mach-imx/irq-common.c b/arch/arm/mach-imx/irq-common.c index 210d36eba8f2..2ce3e0130ada 100644 --- a/arch/arm/mach-imx/irq-common.c +++ b/arch/arm/mach-imx/irq-common.c @@ -1,19 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) BitBox Ltd 2010 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #include <linux/module.h> diff --git a/arch/arm/mach-imx/irq-common.h b/arch/arm/mach-imx/irq-common.h index 6e3175dc0c0a..1c2ac0fa4ab1 100644 --- a/arch/arm/mach-imx/irq-common.h +++ b/arch/arm/mach-imx/irq-common.h @@ -1,19 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) BitBox Ltd 2010 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __PLAT_MXC_IRQ_COMMON_H__ diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 17a97ba2cecf..4d9a56fb6989 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * armadillo5x0.c * @@ -6,21 +7,6 @@ * * Based on Atmark Techno, Inc. armadillo 500 BSP 2008 * Based on mx31ads.c and pcm037.c Great Work! - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #include <linux/types.h> diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index c97d7cb39135..3929208600f2 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -1,18 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2000 Deep Blue Solutions Ltd * Copyright (C) 2002 Shane Nay (shane@minirl.com) * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-imx/mach-imx1.c b/arch/arm/mach-imx/mach-imx1.c index 3a8406e45b65..32df3b8012f9 100644 --- a/arch/arm/mach-imx/mach-imx1.c +++ b/arch/arm/mach-imx/mach-imx1.c @@ -1,10 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/of_platform.h> diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c index 353b86e3808f..95de48a1aa7d 100644 --- a/arch/arm/mach-imx/mach-imx25.c +++ b/arch/arm/mach-imx/mach-imx25.c @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Sascha Hauer, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/irq.h> diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 5169dfba9718..c0350bc20941 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -1,24 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * mach-imx27_visstrim_m10.c * * Copyright 2010 Javier Martin <javier.martin@vista-silicon.com> * * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -258,8 +244,7 @@ static void __init visstrim_analog_camera_init(void) return; dma_declare_coherent_memory(&pdev->dev, mx2_camera_base, - mx2_camera_base, MX2_CAMERA_BUF_SIZE, - DMA_MEMORY_EXCLUSIVE); + mx2_camera_base, MX2_CAMERA_BUF_SIZE); } static void __init visstrim_reserve(void) @@ -445,8 +430,7 @@ static void __init visstrim_coda_init(void) dma_declare_coherent_memory(&pdev->dev, mx2_camera_base + MX2_CAMERA_BUF_SIZE, mx2_camera_base + MX2_CAMERA_BUF_SIZE, - MX2_CAMERA_BUF_SIZE, - DMA_MEMORY_EXCLUSIVE); + MX2_CAMERA_BUF_SIZE); } /* DMA deinterlace */ @@ -465,8 +449,7 @@ static void __init visstrim_deinterlace_init(void) dma_declare_coherent_memory(&pdev->dev, mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, - MX2_CAMERA_BUF_SIZE, - DMA_MEMORY_EXCLUSIVE); + MX2_CAMERA_BUF_SIZE); } /* Emma-PrP for format conversion */ @@ -485,8 +468,7 @@ static void __init visstrim_emmaprp_init(void) */ ret = dma_declare_coherent_memory(&pdev->dev, mx2_camera_base, mx2_camera_base, - MX2_CAMERA_BUF_SIZE, - DMA_MEMORY_EXCLUSIVE); + MX2_CAMERA_BUF_SIZE); if (ret) pr_err("Failed to declare memory for emmaprp\n"); } diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c index 4cab5f61260f..f4da205f57db 100644 --- a/arch/arm/mach-imx/mach-imx50.c +++ b/arch/arm/mach-imx/mach-imx50.c @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013 Greg Ungerer <gerg@uclinux.org> * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/of_platform.h> diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index c7169c2f94c4..8b748a1854d7 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/io.h> @@ -59,6 +53,7 @@ static void __init imx51_m4if_setup(void) return; m4if_base = of_iomap(np, 0); + of_node_put(np); if (!m4if_base) { pr_err("Unable to map M4IF registers\n"); return; diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 5ec7100737e8..8223c5aee45d 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/clk.h> diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 7d80a0ae723c..edd26e0ffeec 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2011-2013 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/clk.h> diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 99be4225297a..e00818abe54d 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -1,10 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/irqchip.h> diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 7f52d9b1e8a4..d5310bf307ff 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/irqchip.h> diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index 6cb8a22b617d..311f5e4ff723 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/irqchip.h> #include <linux/mfd/syscon.h> diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index 26ca744d3e2b..dec5d90a66ce 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/irqchip.h> #include <linux/mfd/syscon.h> diff --git a/arch/arm/mach-imx/mach-imx7ulp.c b/arch/arm/mach-imx/mach-imx7ulp.c index 33937ebf66b5..11ac71aaf965 100644 --- a/arch/arm/mach-imx/mach-imx7ulp.c +++ b/arch/arm/mach-imx/mach-imx7ulp.c @@ -6,17 +6,57 @@ */ #include <linux/irqchip.h> +#include <linux/mfd/syscon.h> #include <linux/of_platform.h> +#include <linux/regmap.h> #include <asm/mach/arch.h> #include "common.h" +#include "cpuidle.h" #include "hardware.h" +#define SIM_JTAG_ID_REG 0x8c + +static void __init imx7ulp_set_revision(void) +{ + struct regmap *sim; + u32 revision; + + sim = syscon_regmap_lookup_by_compatible("fsl,imx7ulp-sim"); + if (IS_ERR(sim)) { + pr_warn("failed to find fsl,imx7ulp-sim regmap!\n"); + return; + } + + if (regmap_read(sim, SIM_JTAG_ID_REG, &revision)) { + pr_warn("failed to read sim regmap!\n"); + return; + } + + /* + * bit[31:28] of JTAG_ID register defines revision as below from B0: + * 0001 B0 + * 0010 B1 + */ + switch (revision >> 28) { + case 1: + imx_set_soc_revision(IMX_CHIP_REVISION_2_0); + break; + case 2: + imx_set_soc_revision(IMX_CHIP_REVISION_2_1); + break; + default: + imx_set_soc_revision(IMX_CHIP_REVISION_1_0); + break; + } +} + static void __init imx7ulp_init_machine(void) { imx7ulp_pm_init(); mxc_set_cpu_type(MXC_CPU_IMX7ULP); + imx7ulp_set_revision(); of_platform_default_populate(NULL, NULL, imx_soc_device_init()); } @@ -25,7 +65,13 @@ static const char *const imx7ulp_dt_compat[] __initconst = { NULL, }; +static void __init imx7ulp_init_late(void) +{ + imx7ulp_cpuidle_init(); +} + DT_MACHINE_START(IMX7ulp, "Freescale i.MX7ULP (Device Tree)") .init_machine = imx7ulp_init_machine, .dt_compat = imx7ulp_dt_compat, + .init_late = imx7ulp_init_late, MACHINE_END diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index ab847e2c822a..63f7f78a77af 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * KZM-ARM11-01 support * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org> @@ -6,16 +7,6 @@ * Copyright (C) 2000 Deep Blue Solutions Ltd * Copyright (C) 2002 Shane Nay (shane@minirl.com) * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/gpio.h> diff --git a/arch/arm/mach-imx/mach-ls1021a.c b/arch/arm/mach-imx/mach-ls1021a.c index b89c858ebfd6..0034359a9b4f 100644 --- a/arch/arm/mach-imx/mach-ls1021a.c +++ b/arch/arm/mach-imx/mach-ls1021a.c @@ -1,10 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2013-2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <asm/mach/arch.h> diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 2e1e540f2e5a..ec011e89eb9e 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -1,17 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2000 Deep Blue Solutions Ltd * Copyright (C) 2002 Shane Nay (shane@minirl.com) * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/platform_device.h> @@ -205,7 +196,6 @@ static struct regulator_init_data mx21ads_lcd_regulator_init_data = { static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = { .supply_name = "LCD", .microvolts = 3300000, - .enable_high = 1, .init_data = &mx21ads_lcd_regulator_init_data, }; diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 45e16bd7e2f2..7b8325fb5b41 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -1,17 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. * * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /* diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index f5e04047ed13..ba202f95bcdf 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -1,17 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2000 Deep Blue Solutions Ltd * Copyright (C) 2002 Shane Nay (shane@minirl.com) * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/gpio/driver.h> /* Needed for gpio_to_irq() */ @@ -237,7 +228,7 @@ static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = { static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = { .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */ .table = { - GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_LOW), { }, }, }; diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 9d87f1dcf7bb..716d2ad51103 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/delay.h> diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 766b8b93fb97..49783385bccf 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -1,17 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2000 Deep Blue Solutions Ltd * Copyright (C) 2002 Shane Nay (shane@minirl.com) * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/types.h> diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 8bf52819d4d9..8f725248299e 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * LILLY-1131 module support * @@ -8,16 +9,6 @@ * Copyright 2005-2007 Freescale Semiconductor * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/types.h> diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index a3cbba6c955b..c0055f57c02d 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -1,18 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2000 Deep Blue Solutions Ltd * Copyright (C) 2002 Shane Nay (shane@minirl.com) * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/types.h> diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 643a3d749703..36f08f45b0ca 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/delay.h> @@ -475,8 +466,7 @@ static int __init mx31moboard_init_cam(void) ret = dma_declare_coherent_memory(&pdev->dev, mx3_camera_base, mx3_camera_base, - MX3_CAMERA_BUF_SIZE, - DMA_MEMORY_EXCLUSIVE); + MX3_CAMERA_BUF_SIZE); if (ret) goto err; diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 1c33a6ce326c..802e0abe4568 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix @@ -8,16 +9,6 @@ * Alex Gershgorin <alexg@meprolight.com> * * Modified from i.MX31 3-Stack Development System - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /* diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 5714e2f1b106..2e28e1b5cddf 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 004737c40fda..bd9443fa6edc 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2008 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/types.h> diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c index 15bc956d466b..51f5142920cf 100644 --- a/arch/arm/mach-imx/mach-pcm037_eet.c +++ b/arch/arm/mach-imx/mach-pcm037_eet.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2009 * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/input.h> diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 46ba3348e8f0..017a50113005 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2009 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/types.h> diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 5c5df8ca38dd..5b362da2dc09 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/types.h> diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c index b20f6c14eda5..9c929b09310c 100644 --- a/arch/arm/mach-imx/mach-vf610.c +++ b/arch/arm/mach-imx/mach-vf610.c @@ -1,10 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012-2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/of_platform.h> diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index da3336aaa4c5..fae5a41b5f6c 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix @@ -5,16 +6,6 @@ * * Derived from mx35 3stack. * Original author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/types.h> diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 2e91ab2ca378..e117d2883df9 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -1,21 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-imx/mm-imx21.c * * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #include <linux/mm.h> diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 862b9b7762c7..dcbe7ec6d543 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -1,21 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-imx/mm-imx27.c * * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #include <linux/mm.h> diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 7638a35b3b36..67264c48ed68 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -1,19 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 1999,2000 Arm Limited * Copyright (C) 2000 Deep Blue Solutions Ltd * Copyright (C) 2002 Shane Nay (shane@minirl.com) * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. * - add MX31 specific definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/mm.h> diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index e49e06834516..0dfd0ae7a63d 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -1,14 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2017 NXP * Copyright 2011,2016 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/clk.h> @@ -294,13 +288,7 @@ static int mmdc_pmu_event_init(struct perf_event *event) return -EOPNOTSUPP; } - if (event->attr.exclude_user || - event->attr.exclude_kernel || - event->attr.exclude_hv || - event->attr.exclude_idle || - event->attr.exclude_host || - event->attr.exclude_guest || - event->attr.sample_period) + if (event->attr.sample_period) return -EINVAL; if (cfg < 0 || cfg >= MMDC_NUM_COUNTERS) @@ -456,6 +444,7 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc, .start = mmdc_pmu_event_start, .stop = mmdc_pmu_event_stop, .read = mmdc_pmu_event_update, + .capabilities = PERF_PMU_CAP_NO_EXCLUDE, }, .mmdc_base = mmdc_base, .dev = dev, diff --git a/arch/arm/mach-imx/mx21.h b/arch/arm/mach-imx/mx21.h index 468738aa997f..38be12a44bdd 100644 --- a/arch/arm/mach-imx/mx21.h +++ b/arch/arm/mach-imx/mx21.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de @@ -6,20 +7,6 @@ * This contains i.MX21-specific hardware definitions. For those * hardware pieces that are common between i.MX21 and i.MX27, have a * look at mx2x.h. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __MACH_MX21_H__ diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h index f96bb2642677..c6f7aae02b67 100644 --- a/arch/arm/mach-imx/mx27.h +++ b/arch/arm/mach-imx/mx27.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de @@ -5,20 +6,6 @@ * This contains i.MX27-specific hardware definitions. For those * hardware pieces that are common between i.MX21 and i.MX27, have a * look at mx2x.h. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __MACH_MX27_H__ diff --git a/arch/arm/mach-imx/mx2x.h b/arch/arm/mach-imx/mx2x.h index 11642f5b224c..841c34e111f1 100644 --- a/arch/arm/mach-imx/mx2x.h +++ b/arch/arm/mach-imx/mx2x.h @@ -1,23 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de * * This contains hardware definitions that are common between i.MX21 and * i.MX27. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __MACH_MX2x_H__ diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c index 231f900a1de7..00a5ee30d5dd 100644 --- a/arch/arm/mach-imx/mx31lilly-db.c +++ b/arch/arm/mach-imx/mx31lilly-db.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * LILLY-1131 development board support * @@ -8,16 +9,6 @@ * Copyright 2005-2007 Freescale Semiconductor * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c index c66a006bf2fd..13da7325c32b 100644 --- a/arch/arm/mach-imx/mx31lite-db.c +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * LogicPD i.MX31 SOM-LV development board support * @@ -8,16 +9,6 @@ * Copyright 2005-2007 Freescale Semiconductor * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c index 3c224f41e68e..6a9db0663a80 100644 --- a/arch/arm/mach-imx/mx31moboard-devboard.c +++ b/arch/arm/mach-imx/mx31moboard-devboard.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/gpio.h> diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c index 9a5a869be1ae..c2690008e6fc 100644 --- a/arch/arm/mach-imx/mx31moboard-marxbot.c +++ b/arch/arm/mach-imx/mx31moboard-marxbot.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/delay.h> diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c index 5cdd7abce515..d165bd952bad 100644 --- a/arch/arm/mach-imx/mx31moboard-smartbot.c +++ b/arch/arm/mach-imx/mx31moboard-smartbot.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/delay.h> diff --git a/arch/arm/mach-imx/mx3x.h b/arch/arm/mach-imx/mx3x.h index 6fec6114c2f1..74b379488e61 100644 --- a/arch/arm/mach-imx/mx3x.h +++ b/arch/arm/mach-imx/mx3x.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. */ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ #ifndef __MACH_MX3x_H__ #define __MACH_MX3x_H__ diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 8e72d4e080af..2bfd2d59b4a6 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -1,20 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2004-2007, 2010-2015 Freescale Semiconductor, Inc. * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. */ #ifndef __ASM_ARCH_MXC_H__ diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index c2d1b329fba1..2aa26928221d 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/init.h> diff --git a/arch/arm/mach-imx/pm-imx25.c b/arch/arm/mach-imx/pm-imx25.c index 8bba9fcd96f6..f253e5019465 100644 --- a/arch/arm/mach-imx/pm-imx25.c +++ b/arch/arm/mach-imx/pm-imx25.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2016 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index 868781fd460c..f057df813f83 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/suspend.h> #include <linux/clk.h> diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 87f45b926c78..1c0ecad3620e 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2011-2014 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/delay.h> @@ -354,9 +348,11 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) * * Note that IRQ #32 is GIC SPI #0. */ - imx_gpc_hwirq_unmask(0); + if (mode != WAIT_CLOCKED) + imx_gpc_hwirq_unmask(0); writel_relaxed(val, ccm_base + CLPCR); - imx_gpc_hwirq_mask(0); + if (mode != WAIT_CLOCKED) + imx_gpc_hwirq_mask(0); return 0; } @@ -631,7 +627,7 @@ static void imx6_pm_stby_poweroff(void) static int imx6_pm_stby_poweroff_probe(void) { if (pm_power_off) { - pr_warn("%s: pm_power_off already claimed %p %pf!\n", + pr_warn("%s: pm_power_off already claimed %p %ps!\n", __func__, pm_power_off, pm_power_off); return -EBUSY; } diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c index cf6a380c2b8d..7b2f7387e662 100644 --- a/arch/arm/mach-imx/pm-imx7ulp.c +++ b/arch/arm/mach-imx/pm-imx7ulp.c @@ -9,21 +9,60 @@ #include <linux/of.h> #include <linux/of_address.h> +#include "common.h" + #define SMC_PMCTRL 0x10 #define BP_PMCTRL_PSTOPO 16 #define PSTOPO_PSTOP3 0x3 +#define PSTOPO_PSTOP2 0x2 +#define PSTOPO_PSTOP1 0x1 +#define BP_PMCTRL_RUNM 8 +#define RUNM_RUN 0 +#define BP_PMCTRL_STOPM 0 +#define STOPM_STOP 0 + +#define BM_PMCTRL_PSTOPO (3 << BP_PMCTRL_PSTOPO) +#define BM_PMCTRL_RUNM (3 << BP_PMCTRL_RUNM) +#define BM_PMCTRL_STOPM (7 << BP_PMCTRL_STOPM) + +static void __iomem *smc1_base; + +int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode) +{ + u32 val = readl_relaxed(smc1_base + SMC_PMCTRL); + + /* clear all */ + val &= ~(BM_PMCTRL_RUNM | BM_PMCTRL_STOPM | BM_PMCTRL_PSTOPO); + + switch (mode) { + case ULP_PM_RUN: + /* system/bus clock enabled */ + val |= PSTOPO_PSTOP3 << BP_PMCTRL_PSTOPO; + break; + case ULP_PM_WAIT: + /* system clock disabled, bus clock enabled */ + val |= PSTOPO_PSTOP2 << BP_PMCTRL_PSTOPO; + break; + case ULP_PM_STOP: + /* system/bus clock disabled */ + val |= PSTOPO_PSTOP1 << BP_PMCTRL_PSTOPO; + break; + default: + return -EINVAL; + } + + writel_relaxed(val, smc1_base + SMC_PMCTRL); + + return 0; +} void __init imx7ulp_pm_init(void) { struct device_node *np; - void __iomem *smc1_base; np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1"); smc1_base = of_iomap(np, 0); WARN_ON(!smc1_base); - /* Partial Stop mode 3 with system/bus clock enabled */ - writel_relaxed(PSTOPO_PSTOP3 << BP_PMCTRL_PSTOPO, - smc1_base + SMC_PMCTRL); - iounmap(smc1_base); + imx7ulp_set_lpm(ULP_PM_RUN); } diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 495d85d0fe7e..0beea6d0217f 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/init.h> diff --git a/arch/arm/mach-imx/ssi-fiq-ksym.c b/arch/arm/mach-imx/ssi-fiq-ksym.c index 792090f9a032..c1e7c3ac0ba5 100644 --- a/arch/arm/mach-imx/ssi-fiq-ksym.c +++ b/arch/arm/mach-imx/ssi-fiq-ksym.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Exported ksyms for the SSI FIQ handler * * Copyright (C) 2009, Sascha Hauer <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-imx/ssi-fiq.S b/arch/arm/mach-imx/ssi-fiq.S index a8b93c5f29b5..68d7fdea92ad 100644 --- a/arch/arm/mach-imx/ssi-fiq.S +++ b/arch/arm/mach-imx/ssi-fiq.S @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-imx/suspend-imx53.S b/arch/arm/mach-imx/suspend-imx53.S index 5ed078ad110a..41b8aad65363 100644 --- a/arch/arm/mach-imx/suspend-imx53.S +++ b/arch/arm/mach-imx/suspend-imx53.S @@ -1,13 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. */ /* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/linkage.h> diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 76ee2ceec8d5..062391ff13da 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -1,12 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2014 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/linkage.h> diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index c06af650e6b1..e88ca027129d 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -1,19 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 1999 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index 4ca37c3f1da4..479a01bdac56 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C)2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/init.h> diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index cefe44f6889b..982eabc36163 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 948872a419c1..9da3ae232211 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-integrator/core.c * * Copyright (C) 2000-2003 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. */ #include <linux/types.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-integrator/hardware.h b/arch/arm/mach-integrator/hardware.h index 857ca5f8b9a6..4d6ade3dd4ee 100644 --- a/arch/arm/mach-integrator/hardware.h +++ b/arch/arm/mach-integrator/hardware.h @@ -1,21 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * This file contains the hardware definitions of the Integrator. * * Copyright (C) 1998-1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef INTEGRATOR_HARDWARE_H #define INTEGRATOR_HARDWARE_H diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 8dfad012dfae..1ecbea5331d6 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-integrator/impd1.c * * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file provides the core support for the IM-PD1 module. * * Module / boot parameters. @@ -27,7 +24,7 @@ #include <linux/irqchip/arm-vic.h> #include <linux/gpio/machine.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include "lm.h" #include "impd1.h" diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 8efe484fac13..035069ea2c8b 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -1,21 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * linux/arch/arm/mach-integrator/integrator_ap.c * * Copyright (C) 2000-2003 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 976ded5c5916..b7eb4038798b 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-integrator/integrator_cp.c * * Copyright (C) 2003 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. */ #include <linux/kernel.h> #include <linux/amba/mmci.h> diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c index 3f9e9f043168..55cd173d1d76 100644 --- a/arch/arm/mach-integrator/lm.c +++ b/arch/arm/mach-integrator/lm.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-integrator/lm.c * * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> #include <linux/init.h> diff --git a/arch/arm/mach-iop13xx/Makefile.boot b/arch/arm/mach-iop13xx/Makefile.boot index 3a8c38c3189c..4f29554c8401 100644 --- a/arch/arm/mach-iop13xx/Makefile.boot +++ b/arch/arm/mach-iop13xx/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h index a86fd0ed7757..51d206f5b093 100644 --- a/arch/arm/mach-iop13xx/include/mach/adma.h +++ b/arch/arm/mach-iop13xx/include/mach/adma.h @@ -1,19 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright(c) 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * */ #ifndef _ADMA_H #define _ADMA_H diff --git a/arch/arm/mach-iop13xx/include/mach/entry-macro.S b/arch/arm/mach-iop13xx/include/mach/entry-macro.S index 1a2d603488d8..9f4ecb8861bd 100644 --- a/arch/arm/mach-iop13xx/include/mach/entry-macro.S +++ b/arch/arm/mach-iop13xx/include/mach/entry-macro.S @@ -1,20 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * iop13xx low level irq macros * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * */ .macro get_irqnr_preamble, base, tmp mrc p15, 0, \tmp, c15, c1, 0 diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c index faaf7d4482c5..253d446b1f3f 100644 --- a/arch/arm/mach-iop13xx/io.c +++ b/arch/arm/mach-iop13xx/io.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * iop13xx custom ioremap implementation * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * */ #include <linux/kernel.h> #include <linux/module.h> diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index d255ab5ad1a5..b3ce5cb228cc 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * iq81340mc board support * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * */ #include <linux/pci.h> diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index 33eeaf1fa11d..123845dcf2d3 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * iq81340sc board support * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * */ #include <linux/pci.h> diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c index bd9b43c8004e..0e24ba7a1309 100644 --- a/arch/arm/mach-iop13xx/irq.c +++ b/arch/arm/mach-iop13xx/irq.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * iop13xx IRQ handling / support functions * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * */ #include <linux/init.h> #include <linux/interrupt.h> diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c index f6235b28578c..f4d70cba1dd1 100644 --- a/arch/arm/mach-iop13xx/msi.c +++ b/arch/arm/mach-iop13xx/msi.c @@ -1,23 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-iop13xx/msi.c * * PCI MSI support for the iop13xx processor * * Copyright (c) 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * */ #include <linux/pci.h> #include <linux/msi.h> diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 070d92ae1b6f..46ea06e906cc 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * iop13xx PCI support * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * */ #include <linux/pci.h> @@ -24,7 +11,7 @@ #include <linux/export.h> #include <asm/irq.h> #include <mach/hardware.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/signal.h> #include <asm/mach/pci.h> #include "pci.h" diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index 53c316f7301e..c5c84c9ec9ee 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * iop13xx platform Initialization * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * */ #include <linux/dma-mapping.h> @@ -300,7 +287,7 @@ static struct resource iop13xx_adma_2_resources[] = { } }; -static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64); +static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(32); static struct iop_adma_platform_data iop13xx_adma_0_data = { .hw_id = 0, .pool_size = PAGE_SIZE, @@ -324,7 +311,7 @@ static struct platform_device iop13xx_adma_0_channel = { .resource = iop13xx_adma_0_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop13xx_adma_0_data, }, }; @@ -336,7 +323,7 @@ static struct platform_device iop13xx_adma_1_channel = { .resource = iop13xx_adma_1_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop13xx_adma_1_data, }, }; @@ -348,7 +335,7 @@ static struct platform_device iop13xx_adma_2_channel = { .resource = iop13xx_adma_2_resources, .dev = { .dma_mask = &iop13xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop13xx_adma_2_data, }, }; diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c index db511ec2b1df..4f916549e381 100644 --- a/arch/arm/mach-iop13xx/tpmi.c +++ b/arch/arm/mach-iop13xx/tpmi.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * iop13xx tpmi device resources * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * */ #include <linux/kernel.h> @@ -23,7 +10,7 @@ #include <linux/dma-mapping.h> #include <linux/io.h> #include <asm/irq.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <mach/irqs.h> /* assumes CONTROLLER_ONLY# is never asserted in the ESSR register */ @@ -152,7 +139,7 @@ static struct resource iop13xx_tpmi_3_resources[] = { } }; -u64 iop13xx_tpmi_mask = DMA_BIT_MASK(64); +u64 iop13xx_tpmi_mask = DMA_BIT_MASK(32); static struct platform_device iop13xx_tpmi_0_device = { .name = "iop-tpmi", .id = 0, @@ -160,7 +147,7 @@ static struct platform_device iop13xx_tpmi_0_device = { .resource = iop13xx_tpmi_0_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; @@ -171,7 +158,7 @@ static struct platform_device iop13xx_tpmi_1_device = { .resource = iop13xx_tpmi_1_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; @@ -182,7 +169,7 @@ static struct platform_device iop13xx_tpmi_2_device = { .resource = iop13xx_tpmi_2_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; @@ -193,7 +180,7 @@ static struct platform_device iop13xx_tpmi_3_device = { .resource = iop13xx_tpmi_3_resources, .dev = { .dma_mask = &iop13xx_tpmi_mask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot index 0a833b11e38c..5c3af01c4000 100644 --- a/arch/arm/mach-iop32x/Makefile.boot +++ b/arch/arm/mach-iop32x/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0xa0008000 params_phys-y := 0xa0000100 initrd_phys-y := 0xa0800000 diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index 77e1ff057303..493de4fd8b2e 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-iop32x/em7210.c * @@ -6,11 +7,6 @@ * Based on arch/arm/mach-iop32x/iq31244.c file. * * Copyright (C) 2007 Arnaud Patard <arnaud.patard@rtp-net.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/mm.h> diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 547b2342d61a..84cdb4587b34 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-iop32x/glantank.c * @@ -5,11 +6,6 @@ * * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com> * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include <linux/mm.h> diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h index 56ec864ec313..84223f86552f 100644 --- a/arch/arm/mach-iop32x/include/mach/iop32x.h +++ b/arch/arm/mach-iop32x/include/mach/iop32x.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-iop32x/include/mach/iop32x.h * @@ -6,10 +7,6 @@ * Author: Rory Bolt <rorybolt@pacbell.net> * Copyright (C) 2002 Rory Bolt * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __IOP32X_H diff --git a/arch/arm/mach-iop32x/include/mach/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h index 33573e09914c..82b11743e91c 100644 --- a/arch/arm/mach-iop32x/include/mach/irqs.h +++ b/arch/arm/mach-iop32x/include/mach/irqs.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-iop32x/include/mach/irqs.h * * Author: Rory Bolt <rorybolt@pacbell.net> * Copyright: (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __IRQS_H diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index 0e1392b20d18..b177e3900616 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-iop32x/iq31244.c * @@ -7,11 +8,6 @@ * Copyright (C) 2002 Rory Bolt * Copyright 2003 (c) MontaVista, Software, Inc. * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include <linux/mm.h> diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index 66782ff1f46a..815b9f070007 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-iop32x/iq80321.c * @@ -6,11 +7,6 @@ * Author: Rory Bolt <rorybolt@pacbell.net> * Copyright (C) 2002 Rory Bolt * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include <linux/mm.h> diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c index 2d1f69a68cbc..2f5d4ec94f9c 100644 --- a/arch/arm/mach-iop32x/irq.c +++ b/arch/arm/mach-iop32x/irq.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-iop32x/irq.c * @@ -5,10 +6,6 @@ * * Author: Rory Bolt <rorybolt@pacbell.net> * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 23e8c93515d4..1948180594f4 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-iop32x/n2100.c * @@ -7,11 +8,6 @@ * Copyright (C) 2002 Rory Bolt * Copyright 2003 (c) MontaVista, Software, Inc. * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include <linux/mm.h> diff --git a/arch/arm/mach-iop33x/Kconfig b/arch/arm/mach-iop33x/Kconfig index 9aa016bb18f9..cd6069c7c568 100644 --- a/arch/arm/mach-iop33x/Kconfig +++ b/arch/arm/mach-iop33x/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only if ARCH_IOP33X menu "IOP33x Implementation Options" diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile index e95db30d81d5..320ecde1f907 100644 --- a/arch/arm/mach-iop33x/Makefile +++ b/arch/arm/mach-iop33x/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel. # diff --git a/arch/arm/mach-iop33x/Makefile.boot b/arch/arm/mach-iop33x/Makefile.boot index 760a0efe7580..e4dd1d26038f 100644 --- a/arch/arm/mach-iop33x/Makefile.boot +++ b/arch/arm/mach-iop33x/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h index c95122653094..0c7041ed7a60 100644 --- a/arch/arm/mach-iop33x/include/mach/iop33x.h +++ b/arch/arm/mach-iop33x/include/mach/iop33x.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-iop33x/include/mach/iop33x.h * @@ -5,10 +6,6 @@ * * Author: Dave Jiang (dave.jiang@intel.com) * Copyright (C) 2003, 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __IOP33X_H diff --git a/arch/arm/mach-iop33x/include/mach/irqs.h b/arch/arm/mach-iop33x/include/mach/irqs.h index 707628a600ac..cc3dce0ad4a1 100644 --- a/arch/arm/mach-iop33x/include/mach/irqs.h +++ b/arch/arm/mach-iop33x/include/mach/irqs.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-iop33x/include/mach/irqs.h * * Author: Dave Jiang (dave.jiang@intel.com) * Copyright: (C) 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __IRQS_H diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index e2cb65cfbe23..ab74fbabc749 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-iop33x/iq80331.c * @@ -5,11 +6,6 @@ * * Author: Dave Jiang <dave.jiang@intel.com> * Copyright (C) 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include <linux/mm.h> diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index 0b6269d94f89..2e309b197aa4 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-iop33x/iq80332.c * @@ -5,11 +6,6 @@ * * Author: Dave Jiang <dave.jiang@intel.com> * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include <linux/mm.h> diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c index c99ec8d0d285..03ad7d3a8f49 100644 --- a/arch/arm/mach-iop33x/irq.c +++ b/arch/arm/mach-iop33x/irq.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-iop33x/irq.c * @@ -5,10 +6,6 @@ * * Author: Dave Jiang <dave.jiang@intel.com> * Copyright (C) 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c index bbf54d794ce8..8fa079d2e3c3 100644 --- a/arch/arm/mach-iop33x/uart.c +++ b/arch/arm/mach-iop33x/uart.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-iop33x/uart.c * * Author: Dave Jiang (dave.jiang@intel.com) * Copyright (C) 2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/mm.h> diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index fea008123eb1..fc5378b00f3d 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -1,9 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0-only if ARCH_IXP4XX menu "Intel IXP4xx Implementation Options" comment "IXP4xx Platforms" +config MACH_IXP4XX_OF + bool + prompt "Devce Tree IXP4xx boards" + default y + select ARM_APPENDED_DTB # Old Redboot bootloaders deployed + select I2C + select I2C_IOP3XX + select PCI + select TIMER_OF + select USE_OF + help + Say 'Y' here to support Device Tree-based IXP4xx platforms. + config MACH_NSLU2 bool prompt "Linksys NSLU2" @@ -222,19 +236,6 @@ config IXP4XX_INDIRECT_PCI need to use the indirect method instead. If you don't know what you need, leave this option unselected. -config IXP4XX_QMGR - tristate "IXP4xx Queue Manager support" - help - This driver supports IXP4xx built-in hardware queue manager - and is automatically selected by Ethernet and HSS drivers. - -config IXP4XX_NPE - tristate "IXP4xx Network Processor Engine support" - select FW_LOADER - help - This driver supports IXP4xx built-in network coprocessors - and is automatically selected by Ethernet and HSS drivers. - endmenu endif diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index f09994500a34..1fa4e6605782 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -6,6 +6,9 @@ obj-pci-y := obj-pci-n := +# Device tree platform +obj-pci-$(CONFIG_MACH_IXP4XX_OF) += ixp4xx-of.o + obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o @@ -40,5 +43,3 @@ obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o -obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o -obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o diff --git a/arch/arm/mach-ixp4xx/Makefile.boot b/arch/arm/mach-ixp4xx/Makefile.boot index 9c7af91d93da..9b015bd1ef27 100644 --- a/arch/arm/mach-ixp4xx/Makefile.boot +++ b/arch/arm/mach-ixp4xx/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c index 548c7d43ade6..2e5996a96dd3 100644 --- a/arch/arm/mach-ixp4xx/avila-pci.c +++ b/arch/arm/mach-ixp4xx/avila-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-ixp4xx/avila-pci.c * @@ -10,11 +11,6 @@ * Copyright (C) 2003-2004 MontaVista Software, Inc. * * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -27,6 +23,8 @@ #include <mach/hardware.h> #include <asm/mach-types.h> +#include "irqs.h" + #define AVILA_MAX_DEV 4 #define LOFT_MAX_DEV 6 #define IRQ_LINES 4 diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 44cbbce6bda6..1981b33109cb 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -28,6 +28,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + #define AVILA_SDA_PIN 7 #define AVILA_SCL_PIN 6 diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 6835b17113e5..893c19c254e3 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-ixp4xx/common-pci.c * @@ -8,11 +9,6 @@ * Copyright (C) 2002 Intel Corporation. * Copyright (C) 2003 Greg Ungerer <gerg@snapgear.com> * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/sched.h> @@ -31,7 +27,7 @@ #include <asm/cputype.h> #include <asm/irq.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/mach/pci.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 846e033c56fa..381f452de28d 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -22,41 +22,29 @@ #include <linux/serial_core.h> #include <linux/interrupt.h> #include <linux/bitops.h> -#include <linux/time.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> #include <linux/io.h> #include <linux/export.h> -#include <linux/gpio/driver.h> #include <linux/cpu.h> #include <linux/pci.h> #include <linux/sched_clock.h> +#include <linux/irqchip/irq-ixp4xx.h> +#include <linux/platform_data/timer-ixp4xx.h> #include <mach/udc.h> #include <mach/hardware.h> #include <mach/io.h> #include <linux/uaccess.h> #include <asm/pgtable.h> #include <asm/page.h> +#include <asm/exception.h> #include <asm/irq.h> #include <asm/system_misc.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#define IXP4XX_TIMER_FREQ 66666000 - -/* - * The timer register doesn't allow to specify the two least significant bits of - * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is - * the best value with the two least significant bits unset. - */ -#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \ - (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \ - (IXP4XX_OST_RELOAD_MASK + 1) +#include "irqs.h" -static void __init ixp4xx_clocksource_init(void); -static void __init ixp4xx_clockevent_init(void); -static struct clock_event_device clockevent_ixp4xx; +#define IXP4XX_TIMER_FREQ 66666000 /************************************************************************* * IXP4xx chipset I/O mapping @@ -77,11 +65,6 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE - }, { /* Queue Manager */ - .virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT, - .pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS), - .length = IXP4XX_QMGR_REGION_SIZE, - .type = MT_DEVICE }, }; @@ -90,258 +73,23 @@ void __init ixp4xx_map_io(void) iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc)); } -/* - * GPIO-functions - */ -/* - * The following converted to the real HW bits the gpio_line_config - */ -/* GPIO pin types */ -#define IXP4XX_GPIO_OUT 0x1 -#define IXP4XX_GPIO_IN 0x2 - -/* GPIO signal types */ -#define IXP4XX_GPIO_LOW 0 -#define IXP4XX_GPIO_HIGH 1 - -/* GPIO Clocks */ -#define IXP4XX_GPIO_CLK_0 14 -#define IXP4XX_GPIO_CLK_1 15 - -static void gpio_line_config(u8 line, u32 direction) -{ - if (direction == IXP4XX_GPIO_IN) - *IXP4XX_GPIO_GPOER |= (1 << line); - else - *IXP4XX_GPIO_GPOER &= ~(1 << line); -} - -static void gpio_line_get(u8 line, int *value) -{ - *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1; -} - -static void gpio_line_set(u8 line, int value) -{ - if (value == IXP4XX_GPIO_HIGH) - *IXP4XX_GPIO_GPOUTR |= (1 << line); - else if (value == IXP4XX_GPIO_LOW) - *IXP4XX_GPIO_GPOUTR &= ~(1 << line); -} - -/************************************************************************* - * IXP4xx chipset IRQ handling - * - * TODO: GPIO IRQs should be marked invalid until the user of the IRQ - * (be it PCI or something else) configures that GPIO line - * as an IRQ. - **************************************************************************/ -enum ixp4xx_irq_type { - IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE -}; - -/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */ -static unsigned long long ixp4xx_irq_edge = 0; - -/* - * IRQ -> GPIO mapping table - */ -static signed char irq2gpio[32] = { - -1, -1, -1, -1, -1, -1, 0, 1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, 2, 3, 4, 5, 6, - 7, 8, 9, 10, 11, 12, -1, -1, -}; - -static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -{ - int irq; - - for (irq = 0; irq < 32; irq++) { - if (irq2gpio[irq] == gpio) - return irq; - } - return -EINVAL; -} - -static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type) -{ - int line = irq2gpio[d->irq]; - u32 int_style; - enum ixp4xx_irq_type irq_type; - volatile u32 *int_reg; - - /* - * Only for GPIO IRQs - */ - if (line < 0) - return -EINVAL; - - switch (type){ - case IRQ_TYPE_EDGE_BOTH: - int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; - irq_type = IXP4XX_IRQ_EDGE; - break; - case IRQ_TYPE_EDGE_RISING: - int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; - irq_type = IXP4XX_IRQ_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; - irq_type = IXP4XX_IRQ_EDGE; - break; - case IRQ_TYPE_LEVEL_HIGH: - int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; - irq_type = IXP4XX_IRQ_LEVEL; - break; - case IRQ_TYPE_LEVEL_LOW: - int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; - irq_type = IXP4XX_IRQ_LEVEL; - break; - default: - return -EINVAL; - } - - if (irq_type == IXP4XX_IRQ_EDGE) - ixp4xx_irq_edge |= (1 << d->irq); - else - ixp4xx_irq_edge &= ~(1 << d->irq); - - if (line >= 8) { /* pins 8-15 */ - line -= 8; - int_reg = IXP4XX_GPIO_GPIT2R; - } else { /* pins 0-7 */ - int_reg = IXP4XX_GPIO_GPIT1R; - } - - /* Clear the style for the appropriate pin */ - *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << - (line * IXP4XX_GPIO_STYLE_SIZE)); - - *IXP4XX_GPIO_GPISR = (1 << line); - - /* Set the new style */ - *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); - - /* Configure the line as an input */ - gpio_line_config(irq2gpio[d->irq], IXP4XX_GPIO_IN); - - return 0; -} - -static void ixp4xx_irq_mask(struct irq_data *d) -{ - if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32) - *IXP4XX_ICMR2 &= ~(1 << (d->irq - 32)); - else - *IXP4XX_ICMR &= ~(1 << d->irq); -} - -static void ixp4xx_irq_ack(struct irq_data *d) -{ - int line = (d->irq < 32) ? irq2gpio[d->irq] : -1; - - if (line >= 0) - *IXP4XX_GPIO_GPISR = (1 << line); -} - -/* - * Level triggered interrupts on GPIO lines can only be cleared when the - * interrupt condition disappears. - */ -static void ixp4xx_irq_unmask(struct irq_data *d) -{ - if (!(ixp4xx_irq_edge & (1 << d->irq))) - ixp4xx_irq_ack(d); - - if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32) - *IXP4XX_ICMR2 |= (1 << (d->irq - 32)); - else - *IXP4XX_ICMR |= (1 << d->irq); -} - -static struct irq_chip ixp4xx_irq_chip = { - .name = "IXP4xx", - .irq_ack = ixp4xx_irq_ack, - .irq_mask = ixp4xx_irq_mask, - .irq_unmask = ixp4xx_irq_unmask, - .irq_set_type = ixp4xx_set_irq_type, -}; - void __init ixp4xx_init_irq(void) { - int i = 0; - /* * ixp4xx does not implement the XScale PWRMODE register * so it must not call cpu_do_idle(). */ cpu_idle_poll_ctrl(true); - /* Route all sources to IRQ instead of FIQ */ - *IXP4XX_ICLR = 0x0; - - /* Disable all interrupt */ - *IXP4XX_ICMR = 0x0; - - if (cpu_is_ixp46x() || cpu_is_ixp43x()) { - /* Route upper 32 sources to IRQ instead of FIQ */ - *IXP4XX_ICLR2 = 0x00; - - /* Disable upper 32 interrupts */ - *IXP4XX_ICMR2 = 0x00; - } - - /* Default to all level triggered */ - for(i = 0; i < NR_IRQS; i++) { - irq_set_chip_and_handler(i, &ixp4xx_irq_chip, - handle_level_irq); - irq_clear_status_flags(i, IRQ_NOREQUEST); - } -} - - -/************************************************************************* - * IXP4xx timer tick - * We use OS timer1 on the CPU for the timer tick and the timestamp - * counter as a source of real clock ticks to account for missed jiffies. - *************************************************************************/ - -static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - /* Clear Pending Interrupt by writing '1' to it */ - *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; - - evt->event_handler(evt); - - return IRQ_HANDLED; + ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS, + (cpu_is_ixp46x() || cpu_is_ixp43x())); } -static struct irqaction ixp4xx_timer_irq = { - .name = "timer1", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = ixp4xx_timer_interrupt, - .dev_id = &clockevent_ixp4xx, -}; - void __init ixp4xx_timer_init(void) { - /* Reset/disable counter */ - *IXP4XX_OSRT1 = 0; - - /* Clear Pending Interrupt by writing '1' to it */ - *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; - - /* Reset time-stamp counter */ - *IXP4XX_OSTS = 0; - - /* Connect the interrupt handler and enable the interrupt */ - setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq); - - ixp4xx_clocksource_init(); - ixp4xx_clockevent_init(); + return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS, + IRQ_IXP4XX_TIMER1, + IXP4XX_TIMER_FREQ); } static struct pxa2xx_udc_mach_info ixp4xx_udc_info; @@ -364,6 +112,24 @@ static struct resource ixp4xx_udc_resources[] = { }, }; +static struct resource ixp4xx_gpio_resource[] = { + { + .start = IXP4XX_GPIO_BASE_PHYS, + .end = IXP4XX_GPIO_BASE_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ixp4xx_gpio_device = { + .name = "ixp4xx-gpio", + .id = -1, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ixp4xx_gpio_resource, + .num_resources = ARRAY_SIZE(ixp4xx_gpio_resource), +}; + /* * USB device controller. The IXP4xx uses the same controller as PXA25X, * so we just use the same device. @@ -378,7 +144,61 @@ static struct platform_device ixp4xx_udc_device = { }, }; +static struct resource ixp4xx_npe_resources[] = { + { + .start = IXP4XX_NPEA_BASE_PHYS, + .end = IXP4XX_NPEA_BASE_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_NPEB_BASE_PHYS, + .end = IXP4XX_NPEB_BASE_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_NPEC_BASE_PHYS, + .end = IXP4XX_NPEC_BASE_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, + +}; + +static struct platform_device ixp4xx_npe_device = { + .name = "ixp4xx-npe", + .id = -1, + .num_resources = ARRAY_SIZE(ixp4xx_npe_resources), + .resource = ixp4xx_npe_resources, +}; + +static struct resource ixp4xx_qmgr_resources[] = { + { + .start = IXP4XX_QMGR_BASE_PHYS, + .end = IXP4XX_QMGR_BASE_PHYS + 0x3fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_IXP4XX_QM1, + .end = IRQ_IXP4XX_QM1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_IXP4XX_QM2, + .end = IRQ_IXP4XX_QM2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ixp4xx_qmgr_device = { + .name = "ixp4xx-qmgr", + .id = -1, + .num_resources = ARRAY_SIZE(ixp4xx_qmgr_resources), + .resource = ixp4xx_qmgr_resources, +}; + static struct platform_device *ixp4xx_devices[] __initdata = { + &ixp4xx_npe_device, + &ixp4xx_qmgr_device, + &ixp4xx_gpio_device, &ixp4xx_udc_device, }; @@ -413,56 +233,12 @@ static struct platform_device *ixp46x_devices[] __initdata = { unsigned long ixp4xx_exp_bus_size; EXPORT_SYMBOL(ixp4xx_exp_bus_size); -static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) -{ - gpio_line_config(gpio, IXP4XX_GPIO_IN); - - return 0; -} - -static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, - int level) -{ - gpio_line_set(gpio, level); - gpio_line_config(gpio, IXP4XX_GPIO_OUT); - - return 0; -} - -static int ixp4xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio) -{ - int value; - - gpio_line_get(gpio, &value); - - return value; -} - -static void ixp4xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, - int value) -{ - gpio_line_set(gpio, value); -} - -static struct gpio_chip ixp4xx_gpio_chip = { - .label = "IXP4XX_GPIO_CHIP", - .direction_input = ixp4xx_gpio_direction_input, - .direction_output = ixp4xx_gpio_direction_output, - .get = ixp4xx_gpio_get_value, - .set = ixp4xx_gpio_set_value, - .to_irq = ixp4xx_gpio_to_irq, - .base = 0, - .ngpio = 16, -}; - void __init ixp4xx_sys_init(void) { ixp4xx_exp_bus_size = SZ_16M; platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); - gpiochip_add_data(&ixp4xx_gpio_chip, NULL); - if (cpu_is_ixp46x()) { int region; @@ -481,103 +257,8 @@ void __init ixp4xx_sys_init(void) ixp4xx_exp_bus_size >> 20); } -/* - * sched_clock() - */ -static u64 notrace ixp4xx_read_sched_clock(void) -{ - return *IXP4XX_OSTS; -} - -/* - * clocksource - */ - -static u64 ixp4xx_clocksource_read(struct clocksource *c) -{ - return *IXP4XX_OSTS; -} - unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); -static void __init ixp4xx_clocksource_init(void) -{ - sched_clock_register(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq); - - clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32, - ixp4xx_clocksource_read); -} - -/* - * clockevents - */ -static int ixp4xx_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; - - *IXP4XX_OSRT1 = (evt & ~IXP4XX_OST_RELOAD_MASK) | opts; - - return 0; -} - -static int ixp4xx_shutdown(struct clock_event_device *evt) -{ - unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; - unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; - - opts &= ~IXP4XX_OST_ENABLE; - *IXP4XX_OSRT1 = osrt | opts; - return 0; -} - -static int ixp4xx_set_oneshot(struct clock_event_device *evt) -{ - unsigned long opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT; - unsigned long osrt = 0; - - /* period set by 'set next_event' */ - *IXP4XX_OSRT1 = osrt | opts; - return 0; -} - -static int ixp4xx_set_periodic(struct clock_event_device *evt) -{ - unsigned long opts = IXP4XX_OST_ENABLE; - unsigned long osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK; - - *IXP4XX_OSRT1 = osrt | opts; - return 0; -} - -static int ixp4xx_resume(struct clock_event_device *evt) -{ - unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; - unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; - - opts |= IXP4XX_OST_ENABLE; - *IXP4XX_OSRT1 = osrt | opts; - return 0; -} - -static struct clock_event_device clockevent_ixp4xx = { - .name = "ixp4xx timer1", - .features = CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_state_shutdown = ixp4xx_shutdown, - .set_state_periodic = ixp4xx_set_periodic, - .set_state_oneshot = ixp4xx_set_oneshot, - .tick_resume = ixp4xx_resume, - .set_next_event = ixp4xx_set_next_event, -}; - -static void __init ixp4xx_clockevent_init(void) -{ - clockevent_ixp4xx.cpumask = cpumask_of(0); - clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ, - 0xf, 0xfffffffe); -} void ixp4xx_restart(enum reboot_mode mode, const char *cmd) { diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index 5d14ce2aee6d..c250b59e8d47 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-ixp4xx/coyote-pci.c * @@ -7,11 +8,6 @@ * Copyright (C) 2003 MontaVista Softwrae, Inc. * * Maintainer: Deepak Saxena <dsaxena@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -23,6 +19,8 @@ #include <asm/irq.h> #include <asm/mach/pci.h> +#include "irqs.h" + #define SLOT0_DEVID 14 #define SLOT1_DEVID 15 diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 7e40fe70933b..7ca43ca2816d 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -25,6 +25,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + #define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3) #define COYOTE_IDE_BASE_VIRT 0xFFFE1000 #define COYOTE_IDE_REGION_SIZE 0x1000 diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c index 8dca76937723..e997d97f619e 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-pci.c +++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * DSM-G600 board-level PCI initialization * @@ -9,11 +10,6 @@ * Copyright (C) 2003-2004 MontaVista Software, Inc. * * Maintainer: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/pci.h> @@ -22,6 +18,8 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> +#include "irqs.h" + #define MAX_DEV 4 #define IRQ_LINES 3 diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 397190f3a8da..4d4c62fced71 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -35,6 +35,8 @@ #include <asm/mach/flash.h> #include <asm/mach/time.h> +#include "irqs.h" + #define DSMG600_SDA_PIN 5 #define DSMG600_SCL_PIN 4 @@ -268,9 +270,6 @@ static void __init dsmg600_init(void) { ixp4xx_sys_init(); - /* Make sure that GPIO14 and GPIO15 are not used as clocks */ - *IXP4XX_GPIO_GPCLKR = 0; - dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); dsmg600_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c index fd4a8625b4ae..4122a61aae70 100644 --- a/arch/arm/mach-ixp4xx/fsg-pci.c +++ b/arch/arm/mach-ixp4xx/fsg-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arch/mach-ixp4xx/fsg-pci.c * @@ -9,11 +10,6 @@ * based on ixdp425-pci.c: * Copyright (C) 2002 Intel Corporation. * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/pci.h> @@ -22,6 +18,8 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> +#include "irqs.h" + #define MAX_DEV 3 #define IRQ_LINES 3 diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index f0a152e365b1..648932d8d7a8 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -29,6 +29,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + #define FSG_SDA_PIN 12 #define FSG_SCL_PIN 13 diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c index d9d6cc089707..3c3ee9dad6d8 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-pci.c +++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arch/mach-ixp4xx/gateway7001-pci.c * @@ -10,11 +11,6 @@ * Copyright (C) 2003 MontaVista Softwrae, Inc. * * Maintainer: Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -27,6 +23,8 @@ #include <asm/mach/pci.h> +#include "irqs.h" + void __init gateway7001_pci_preinit(void) { irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c index 1be6faf6da9a..678e7dfff0e5 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -28,6 +28,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + static struct flash_platform_data gateway7001_flash_data = { .map_name = "cfi_probe", .width = 2, diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index 4d805080020e..a0e0b6b7dc5c 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -18,6 +18,8 @@ #include <asm/mach/pci.h> #include <asm/system_info.h> +#include "irqs.h" + #define SLOT_ETHA 0x0B /* IDSEL = AD21 */ #define SLOT_ETHB 0x0C /* IDSEL = AD20 */ #define SLOT_MPCI 0x0D /* IDSEL = AD19 */ diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index 551d114c9e14..224328dbddb1 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ixp4xx/gtwx5715-pci.c * @@ -5,21 +6,6 @@ * * Copyright (C) 2004 George T. Joseph * Derived from Coyote - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * */ #include <linux/pci.h> @@ -30,6 +16,8 @@ #include <mach/hardware.h> #include <asm/mach/pci.h> +#include "irqs.h" + #define SLOT0_DEVID 0 #define SLOT1_DEVID 1 #define INTA 10 /* slot 1 has INTA and INTB crossed */ diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 16a12994fb53..28f0d2a8a829 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ixp4xx/gtwx5715-setup.c * @@ -5,21 +6,6 @@ * * Copyright (C) 2004 George T. Joseph * Derived from Coyote - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * */ #include <linux/init.h> @@ -36,6 +22,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + /* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch and operate as an SPI type interface. The details of the interface are available on Kendin/Micrel's web site. */ diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h index ebc0ba31ce85..b872a5354ddd 100644 --- a/arch/arm/mach-ixp4xx/include/mach/cpu.h +++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ixp4xx/include/mach/cpu.h * * IXP4XX cpu type detection * * Copyright (C) 2007 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __ASM_ARCH_CPU_H__ diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S deleted file mode 100644 index 79adf83e2c3d..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S +++ /dev/null @@ -1,41 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for IXP4xx-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <mach/hardware.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET) - ldr \irqstat, [\irqstat] @ get interrupts - cmp \irqstat, #0 - beq 1001f @ upper IRQ? - clz \irqnr, \irqstat - mov \base, #31 - sub \irqnr, \base, \irqnr - b 1002f @ lower IRQ being - @ handled - -1001: - /* - * IXP465/IXP435 has an upper IRQ status register - */ -#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) - ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET) - ldr \irqstat, [\irqstat] @ get upper interrupts - mov \irqnr, #63 - clz \irqstat, \irqstat - cmp \irqstat, #32 - subne \irqnr, \irqnr, \irqstat -#endif -1002: - .endm - - diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h index 034bb2a1b805..b884eedcd0fc 100644 --- a/arch/arm/mach-ixp4xx/include/mach/hardware.h +++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ixp4xx/include/mach/hardware.h * * Copyright (C) 2002 Intel Corporation. * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /* diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index 844e8ac593e2..014cf6dcaf8b 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ixp4xx/include/mach/io.h * * Author: Deepak Saxena <dsaxena@plexity.net> * * Copyright (C) 2002-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARM_ARCH_IO_H diff --git a/arch/arm/mach-ixp4xx/include/mach/irqs.h b/arch/arm/mach-ixp4xx/include/mach/irqs.h deleted file mode 100644 index 7e6d4cce7c27..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/irqs.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/irqs.h - * - * IRQ definitions for IXP4XX based systems - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _ARCH_IXP4XX_IRQS_H_ -#define _ARCH_IXP4XX_IRQS_H_ - -#define IRQ_IXP4XX_NPEA 0 -#define IRQ_IXP4XX_NPEB 1 -#define IRQ_IXP4XX_NPEC 2 -#define IRQ_IXP4XX_QM1 3 -#define IRQ_IXP4XX_QM2 4 -#define IRQ_IXP4XX_TIMER1 5 -#define IRQ_IXP4XX_GPIO0 6 -#define IRQ_IXP4XX_GPIO1 7 -#define IRQ_IXP4XX_PCI_INT 8 -#define IRQ_IXP4XX_PCI_DMA1 9 -#define IRQ_IXP4XX_PCI_DMA2 10 -#define IRQ_IXP4XX_TIMER2 11 -#define IRQ_IXP4XX_USB 12 -#define IRQ_IXP4XX_UART2 13 -#define IRQ_IXP4XX_TIMESTAMP 14 -#define IRQ_IXP4XX_UART1 15 -#define IRQ_IXP4XX_WDOG 16 -#define IRQ_IXP4XX_AHB_PMU 17 -#define IRQ_IXP4XX_XSCALE_PMU 18 -#define IRQ_IXP4XX_GPIO2 19 -#define IRQ_IXP4XX_GPIO3 20 -#define IRQ_IXP4XX_GPIO4 21 -#define IRQ_IXP4XX_GPIO5 22 -#define IRQ_IXP4XX_GPIO6 23 -#define IRQ_IXP4XX_GPIO7 24 -#define IRQ_IXP4XX_GPIO8 25 -#define IRQ_IXP4XX_GPIO9 26 -#define IRQ_IXP4XX_GPIO10 27 -#define IRQ_IXP4XX_GPIO11 28 -#define IRQ_IXP4XX_GPIO12 29 -#define IRQ_IXP4XX_SW_INT1 30 -#define IRQ_IXP4XX_SW_INT2 31 -#define IRQ_IXP4XX_USB_HOST 32 -#define IRQ_IXP4XX_I2C 33 -#define IRQ_IXP4XX_SSP 34 -#define IRQ_IXP4XX_TSYNC 35 -#define IRQ_IXP4XX_EAU_DONE 36 -#define IRQ_IXP4XX_SHA_DONE 37 -#define IRQ_IXP4XX_SWCP_PE 58 -#define IRQ_IXP4XX_QM_PE 60 -#define IRQ_IXP4XX_MCU_ECC 61 -#define IRQ_IXP4XX_EXP_PE 62 - -#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n) -#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n) - -/* - * Only first 32 sources are valid if running on IXP42x systems - */ -#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) -#define NR_IRQS 64 -#else -#define NR_IRQS 32 -#endif - -#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU) - -#endif diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h b/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h index cf03614d250d..d792130e27b0 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h @@ -1,21 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * PTP 1588 clock using the IXP46X * * Copyright (C) 2010 OMICRON electronics GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _IXP46X_TS_H_ diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index b7ddd27419c2..708d085ce39f 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h * @@ -8,11 +9,6 @@ * * Copyright (C) 2002 Intel Corporation. * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _ASM_ARM_IXP4XX_H_ @@ -43,8 +39,6 @@ * Queue Manager */ #define IXP4XX_QMGR_BASE_PHYS 0x60000000 -#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFEF15000) -#define IXP4XX_QMGR_REGION_SIZE 0x00004000 /* * Peripheral space, including debug UART. Must be section-aligned so that @@ -132,9 +126,6 @@ #define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000) #define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000) #define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000) -#define IXP4XX_NPEA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000) -#define IXP4XX_NPEB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000) -#define IXP4XX_NPEC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000) #define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000) #define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000) #define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000) @@ -148,95 +139,6 @@ #define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000) /* - * Constants to make it easy to access Interrupt Controller registers - */ -#define IXP4XX_ICPR_OFFSET 0x00 /* Interrupt Status */ -#define IXP4XX_ICMR_OFFSET 0x04 /* Interrupt Enable */ -#define IXP4XX_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */ -#define IXP4XX_ICIP_OFFSET 0x0C /* IRQ Status */ -#define IXP4XX_ICFP_OFFSET 0x10 /* FIQ Status */ -#define IXP4XX_ICHR_OFFSET 0x14 /* Interrupt Priority */ -#define IXP4XX_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */ -#define IXP4XX_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */ - -/* - * IXP465-only - */ -#define IXP4XX_ICPR2_OFFSET 0x20 /* Interrupt Status 2 */ -#define IXP4XX_ICMR2_OFFSET 0x24 /* Interrupt Enable 2 */ -#define IXP4XX_ICLR2_OFFSET 0x28 /* Interrupt IRQ/FIQ Select 2 */ -#define IXP4XX_ICIP2_OFFSET 0x2C /* IRQ Status */ -#define IXP4XX_ICFP2_OFFSET 0x30 /* FIQ Status */ -#define IXP4XX_ICEEN_OFFSET 0x34 /* Error High Pri Enable */ - - -/* - * Interrupt Controller Register Definitions. - */ - -#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x))) - -#define IXP4XX_ICPR IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET) -#define IXP4XX_ICMR IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET) -#define IXP4XX_ICLR IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET) -#define IXP4XX_ICIP IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET) -#define IXP4XX_ICFP IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET) -#define IXP4XX_ICHR IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET) -#define IXP4XX_ICIH IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) -#define IXP4XX_ICFH IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET) -#define IXP4XX_ICPR2 IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET) -#define IXP4XX_ICMR2 IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET) -#define IXP4XX_ICLR2 IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET) -#define IXP4XX_ICIP2 IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET) -#define IXP4XX_ICFP2 IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET) -#define IXP4XX_ICEEN IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET) - -/* - * Constants to make it easy to access GPIO registers - */ -#define IXP4XX_GPIO_GPOUTR_OFFSET 0x00 -#define IXP4XX_GPIO_GPOER_OFFSET 0x04 -#define IXP4XX_GPIO_GPINR_OFFSET 0x08 -#define IXP4XX_GPIO_GPISR_OFFSET 0x0C -#define IXP4XX_GPIO_GPIT1R_OFFSET 0x10 -#define IXP4XX_GPIO_GPIT2R_OFFSET 0x14 -#define IXP4XX_GPIO_GPCLKR_OFFSET 0x18 -#define IXP4XX_GPIO_GPDBSELR_OFFSET 0x1C - -/* - * GPIO Register Definitions. - * [Only perform 32bit reads/writes] - */ -#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x))) - -#define IXP4XX_GPIO_GPOUTR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET) -#define IXP4XX_GPIO_GPOER IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET) -#define IXP4XX_GPIO_GPINR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET) -#define IXP4XX_GPIO_GPISR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET) -#define IXP4XX_GPIO_GPIT1R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET) -#define IXP4XX_GPIO_GPIT2R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET) -#define IXP4XX_GPIO_GPCLKR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET) -#define IXP4XX_GPIO_GPDBSELR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET) - -/* - * GPIO register bit definitions - */ - -/* Interrupt styles - */ -#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0 -#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1 -#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2 -#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3 -#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4 - -/* - * Mask used to clear interrupt styles - */ -#define IXP4XX_GPIO_STYLE_CLEAR 0x7 -#define IXP4XX_GPIO_STYLE_SIZE 3 - -/* * Constants to make it easy to access Timer Control/Status registers */ #define IXP4XX_OSTS_OFFSET 0x00 /* Continious TimeStamp */ diff --git a/arch/arm/mach-ixp4xx/include/mach/npe.h b/arch/arm/mach-ixp4xx/include/mach/npe.h deleted file mode 100644 index 3a980845e557..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/npe.h +++ /dev/null @@ -1,40 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __IXP4XX_NPE_H -#define __IXP4XX_NPE_H - -#include <linux/kernel.h> - -extern const char *npe_names[]; - -struct npe_regs { - u32 exec_addr, exec_data, exec_status_cmd, exec_count; - u32 action_points[4]; - u32 watchpoint_fifo, watch_count; - u32 profile_count; - u32 messaging_status, messaging_control; - u32 mailbox_status, /*messaging_*/ in_out_fifo; -}; - -struct npe { - struct resource *mem_res; - struct npe_regs __iomem *regs; - u32 regs_phys; - int id; - int valid; -}; - - -static inline const char *npe_name(struct npe *npe) -{ - return npe_names[npe->id]; -} - -int npe_running(struct npe *npe); -int npe_send_message(struct npe *npe, const void *msg, const char *what); -int npe_recv_message(struct npe *npe, void *msg, const char *what); -int npe_send_recv_message(struct npe *npe, void *msg, const char *what); -int npe_load_firmware(struct npe *npe, const char *name, struct device *dev); -struct npe *npe_request(unsigned id); -void npe_release(struct npe *npe); - -#endif /* __IXP4XX_NPE_H */ diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h deleted file mode 100644 index 4de8da536dbb..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - */ - -#ifndef IXP4XX_QMGR_H -#define IXP4XX_QMGR_H - -#include <linux/io.h> -#include <linux/kernel.h> - -#define DEBUG_QMGR 0 - -#define HALF_QUEUES 32 -#define QUEUES 64 -#define MAX_QUEUE_LENGTH 4 /* in dwords */ - -#define QUEUE_STAT1_EMPTY 1 /* queue status bits */ -#define QUEUE_STAT1_NEARLY_EMPTY 2 -#define QUEUE_STAT1_NEARLY_FULL 4 -#define QUEUE_STAT1_FULL 8 -#define QUEUE_STAT2_UNDERFLOW 1 -#define QUEUE_STAT2_OVERFLOW 2 - -#define QUEUE_WATERMARK_0_ENTRIES 0 -#define QUEUE_WATERMARK_1_ENTRY 1 -#define QUEUE_WATERMARK_2_ENTRIES 2 -#define QUEUE_WATERMARK_4_ENTRIES 3 -#define QUEUE_WATERMARK_8_ENTRIES 4 -#define QUEUE_WATERMARK_16_ENTRIES 5 -#define QUEUE_WATERMARK_32_ENTRIES 6 -#define QUEUE_WATERMARK_64_ENTRIES 7 - -/* queue interrupt request conditions */ -#define QUEUE_IRQ_SRC_EMPTY 0 -#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1 -#define QUEUE_IRQ_SRC_NEARLY_FULL 2 -#define QUEUE_IRQ_SRC_FULL 3 -#define QUEUE_IRQ_SRC_NOT_EMPTY 4 -#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5 -#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6 -#define QUEUE_IRQ_SRC_NOT_FULL 7 - -struct qmgr_regs { - u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */ - u32 stat1[4]; /* 0x400 - 0x40F */ - u32 stat2[2]; /* 0x410 - 0x417 */ - u32 statne_h; /* 0x418 - queue nearly empty */ - u32 statf_h; /* 0x41C - queue full */ - u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */ - u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */ - u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */ - u32 reserved[1776]; - u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */ -}; - -void qmgr_set_irq(unsigned int queue, int src, - void (*handler)(void *pdev), void *pdev); -void qmgr_enable_irq(unsigned int queue); -void qmgr_disable_irq(unsigned int queue); - -/* request_ and release_queue() must be called from non-IRQ context */ - -#if DEBUG_QMGR -extern char qmgr_queue_descs[QUEUES][32]; - -int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, - unsigned int nearly_empty_watermark, - unsigned int nearly_full_watermark, - const char *desc_format, const char* name); -#else -int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, - unsigned int nearly_empty_watermark, - unsigned int nearly_full_watermark); -#define qmgr_request_queue(queue, len, nearly_empty_watermark, \ - nearly_full_watermark, desc_format, name) \ - __qmgr_request_queue(queue, len, nearly_empty_watermark, \ - nearly_full_watermark) -#endif - -void qmgr_release_queue(unsigned int queue); - - -static inline void qmgr_put_entry(unsigned int queue, u32 val) -{ - struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; -#if DEBUG_QMGR - BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ - - printk(KERN_DEBUG "Queue %s(%i) put %X\n", - qmgr_queue_descs[queue], queue, val); -#endif - __raw_writel(val, &qmgr_regs->acc[queue][0]); -} - -static inline u32 qmgr_get_entry(unsigned int queue) -{ - u32 val; - const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; - val = __raw_readl(&qmgr_regs->acc[queue][0]); -#if DEBUG_QMGR - BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ - - printk(KERN_DEBUG "Queue %s(%i) get %X\n", - qmgr_queue_descs[queue], queue, val); -#endif - return val; -} - -static inline int __qmgr_get_stat1(unsigned int queue) -{ - const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; - return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) - >> ((queue & 7) << 2)) & 0xF; -} - -static inline int __qmgr_get_stat2(unsigned int queue) -{ - const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; - BUG_ON(queue >= HALF_QUEUES); - return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) - >> ((queue & 0xF) << 1)) & 0x3; -} - -/** - * qmgr_stat_empty() - checks if a hardware queue is empty - * @queue: queue number - * - * Returns non-zero value if the queue is empty. - */ -static inline int qmgr_stat_empty(unsigned int queue) -{ - BUG_ON(queue >= HALF_QUEUES); - return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY; -} - -/** - * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark - * @queue: queue number - * - * Returns non-zero value if the queue is below low watermark. - */ -static inline int qmgr_stat_below_low_watermark(unsigned int queue) -{ - const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; - if (queue >= HALF_QUEUES) - return (__raw_readl(&qmgr_regs->statne_h) >> - (queue - HALF_QUEUES)) & 0x01; - return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY; -} - -/** - * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark - * @queue: queue number - * - * Returns non-zero value if the queue is above high watermark - */ -static inline int qmgr_stat_above_high_watermark(unsigned int queue) -{ - BUG_ON(queue >= HALF_QUEUES); - return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL; -} - -/** - * qmgr_stat_full() - checks if a hardware queue is full - * @queue: queue number - * - * Returns non-zero value if the queue is full. - */ -static inline int qmgr_stat_full(unsigned int queue) -{ - const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; - if (queue >= HALF_QUEUES) - return (__raw_readl(&qmgr_regs->statf_h) >> - (queue - HALF_QUEUES)) & 0x01; - return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL; -} - -/** - * qmgr_stat_underflow() - checks if a hardware queue experienced underflow - * @queue: queue number - * - * Returns non-zero value if the queue experienced underflow. - */ -static inline int qmgr_stat_underflow(unsigned int queue) -{ - return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW; -} - -/** - * qmgr_stat_overflow() - checks if a hardware queue experienced overflow - * @queue: queue number - * - * Returns non-zero value if the queue experienced overflow. - */ -static inline int qmgr_stat_overflow(unsigned int queue) -{ - return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW; -} - -#endif diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h index 7b25c0225e46..9e08b270cfc7 100644 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ixp4xx/include/mach/uncompress.h * * Copyright (C) 2002 Intel Corporation. * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _ARCH_UNCOMPRESS_H_ diff --git a/arch/arm/mach-ixp4xx/irqs.h b/arch/arm/mach-ixp4xx/irqs.h new file mode 100644 index 000000000000..a3e8d6408c56 --- /dev/null +++ b/arch/arm/mach-ixp4xx/irqs.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * arch/arm/mach-ixp4xx/include/mach/irqs.h + * + * IRQ definitions for IXP4XX based systems + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003 MontaVista Software, Inc. + */ + +#ifndef _ARCH_IXP4XX_IRQS_H_ +#define _ARCH_IXP4XX_IRQS_H_ + +#define IRQ_IXP4XX_BASE 16 + +#define IRQ_IXP4XX_NPEA (IRQ_IXP4XX_BASE + 0) +#define IRQ_IXP4XX_NPEB (IRQ_IXP4XX_BASE + 1) +#define IRQ_IXP4XX_NPEC (IRQ_IXP4XX_BASE + 2) +#define IRQ_IXP4XX_QM1 (IRQ_IXP4XX_BASE + 3) +#define IRQ_IXP4XX_QM2 (IRQ_IXP4XX_BASE + 4) +#define IRQ_IXP4XX_TIMER1 (IRQ_IXP4XX_BASE + 5) +#define IRQ_IXP4XX_GPIO0 (IRQ_IXP4XX_BASE + 6) +#define IRQ_IXP4XX_GPIO1 (IRQ_IXP4XX_BASE + 7) +#define IRQ_IXP4XX_PCI_INT (IRQ_IXP4XX_BASE + 8) +#define IRQ_IXP4XX_PCI_DMA1 (IRQ_IXP4XX_BASE + 9) +#define IRQ_IXP4XX_PCI_DMA2 (IRQ_IXP4XX_BASE + 10) +#define IRQ_IXP4XX_TIMER2 (IRQ_IXP4XX_BASE + 11) +#define IRQ_IXP4XX_USB (IRQ_IXP4XX_BASE + 12) +#define IRQ_IXP4XX_UART2 (IRQ_IXP4XX_BASE + 13) +#define IRQ_IXP4XX_TIMESTAMP (IRQ_IXP4XX_BASE + 14) +#define IRQ_IXP4XX_UART1 (IRQ_IXP4XX_BASE + 15) +#define IRQ_IXP4XX_WDOG (IRQ_IXP4XX_BASE + 16) +#define IRQ_IXP4XX_AHB_PMU (IRQ_IXP4XX_BASE + 17) +#define IRQ_IXP4XX_XSCALE_PMU (IRQ_IXP4XX_BASE + 18) +#define IRQ_IXP4XX_GPIO2 (IRQ_IXP4XX_BASE + 19) +#define IRQ_IXP4XX_GPIO3 (IRQ_IXP4XX_BASE + 20) +#define IRQ_IXP4XX_GPIO4 (IRQ_IXP4XX_BASE + 21) +#define IRQ_IXP4XX_GPIO5 (IRQ_IXP4XX_BASE + 22) +#define IRQ_IXP4XX_GPIO6 (IRQ_IXP4XX_BASE + 23) +#define IRQ_IXP4XX_GPIO7 (IRQ_IXP4XX_BASE + 24) +#define IRQ_IXP4XX_GPIO8 (IRQ_IXP4XX_BASE + 25) +#define IRQ_IXP4XX_GPIO9 (IRQ_IXP4XX_BASE + 26) +#define IRQ_IXP4XX_GPIO10 (IRQ_IXP4XX_BASE + 27) +#define IRQ_IXP4XX_GPIO11 (IRQ_IXP4XX_BASE + 28) +#define IRQ_IXP4XX_GPIO12 (IRQ_IXP4XX_BASE + 29) +#define IRQ_IXP4XX_SW_INT1 (IRQ_IXP4XX_BASE + 30) +#define IRQ_IXP4XX_SW_INT2 (IRQ_IXP4XX_BASE + 31) +#define IRQ_IXP4XX_USB_HOST (IRQ_IXP4XX_BASE + 32) +#define IRQ_IXP4XX_I2C (IRQ_IXP4XX_BASE + 33) +#define IRQ_IXP4XX_SSP (IRQ_IXP4XX_BASE + 34) +#define IRQ_IXP4XX_TSYNC (IRQ_IXP4XX_BASE + 35) +#define IRQ_IXP4XX_EAU_DONE (IRQ_IXP4XX_BASE + 36) +#define IRQ_IXP4XX_SHA_DONE (IRQ_IXP4XX_BASE + 37) +#define IRQ_IXP4XX_SWCP_PE (IRQ_IXP4XX_BASE + 58) +#define IRQ_IXP4XX_QM_PE (IRQ_IXP4XX_BASE + 60) +#define IRQ_IXP4XX_MCU_ECC (IRQ_IXP4XX_BASE + 61) +#define IRQ_IXP4XX_EXP_PE (IRQ_IXP4XX_BASE + 62) + +#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n) +#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n) + +#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU) + +#endif diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index 318424dd3c50..c77fe0d52d79 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-ixp4xx/ixdp425-pci.c * @@ -7,11 +8,6 @@ * Copyright (C) 2003-2004 MontaVista Software, Inc. * * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -24,6 +20,8 @@ #include <mach/hardware.h> #include <asm/mach-types.h> +#include "irqs.h" + #define MAX_DEV 4 #define IRQ_LINES 4 diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 57d7df79d838..6f0f7ed18ea8 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -32,6 +32,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + #define IXDP425_SDA_PIN 7 #define IXDP425_SCL_PIN 6 diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index 1f8717ba13dc..1cbea65897b2 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-ixp4xx/ixdpg425-pci.c * @@ -6,11 +7,6 @@ * Copyright (C) 2004 MontaVista Softwrae, Inc. * * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -23,6 +19,8 @@ #include <asm/mach/pci.h> +#include "irqs.h" + void __init ixdpg425_pci_preinit(void) { irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c new file mode 100644 index 000000000000..7449b8319c8a --- /dev/null +++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IXP4xx Device Tree boot support + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/ixp4xx-regs.h> + +static struct map_desc ixp4xx_of_io_desc[] __initdata = { + /* + * This is needed for runtime system configuration checks, + * such as reading if hardware so-and-so is present. This + * could eventually be converted into a syscon once all boards + * are converted to device tree. + */ + { + .virtual = IXP4XX_EXP_CFG_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#ifdef CONFIG_DEBUG_UART_8250 + /* This is needed for LL-debug/earlyprintk/debug-macro.S */ + { + .virtual = CONFIG_DEBUG_UART_VIRT, + .pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#endif +}; + +static void __init ixp4xx_of_map_io(void) +{ + iotable_init(ixp4xx_of_io_desc, ARRAY_SIZE(ixp4xx_of_io_desc)); +} + +/* + * We handle 4 differen SoC families. These compatible strings are enough + * to provide the core so that different boards can add their more detailed + * specifics. + */ +static const char *ixp4xx_of_board_compat[] = { + "intel,ixp42x", + "intel,ixp43x", + "intel,ixp45x", + "intel,ixp46x", + NULL, +}; + +DT_MACHINE_START(IXP4XX_DT, "IXP4xx (Device Tree)") + .map_io = ixp4xx_of_map_io, + .dt_compat = ixp4xx_of_board_compat, +MACHINE_END diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c deleted file mode 100644 index d4eb09a62863..000000000000 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ /dev/null @@ -1,742 +0,0 @@ -/* - * Intel IXP4xx Network Processor Engine driver for Linux - * - * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - * - * The code is based on publicly available information: - * - Intel IXP4xx Developer's Manual and other e-papers - * - Intel IXP400 Access Library Software (BSD license) - * - previous works by Christian Hohnstaedt <chohnstaedt@innominate.com> - * Thanks, Christian. - */ - -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/firmware.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <mach/npe.h> - -#define DEBUG_MSG 0 -#define DEBUG_FW 0 - -#define NPE_COUNT 3 -#define MAX_RETRIES 1000 /* microseconds */ -#define NPE_42X_DATA_SIZE 0x800 /* in dwords */ -#define NPE_46X_DATA_SIZE 0x1000 -#define NPE_A_42X_INSTR_SIZE 0x1000 -#define NPE_B_AND_C_42X_INSTR_SIZE 0x800 -#define NPE_46X_INSTR_SIZE 0x1000 -#define REGS_SIZE 0x1000 - -#define NPE_PHYS_REG 32 - -#define FW_MAGIC 0xFEEDF00D -#define FW_BLOCK_TYPE_INSTR 0x0 -#define FW_BLOCK_TYPE_DATA 0x1 -#define FW_BLOCK_TYPE_EOF 0xF - -/* NPE exec status (read) and command (write) */ -#define CMD_NPE_STEP 0x01 -#define CMD_NPE_START 0x02 -#define CMD_NPE_STOP 0x03 -#define CMD_NPE_CLR_PIPE 0x04 -#define CMD_CLR_PROFILE_CNT 0x0C -#define CMD_RD_INS_MEM 0x10 /* instruction memory */ -#define CMD_WR_INS_MEM 0x11 -#define CMD_RD_DATA_MEM 0x12 /* data memory */ -#define CMD_WR_DATA_MEM 0x13 -#define CMD_RD_ECS_REG 0x14 /* exec access register */ -#define CMD_WR_ECS_REG 0x15 - -#define STAT_RUN 0x80000000 -#define STAT_STOP 0x40000000 -#define STAT_CLEAR 0x20000000 -#define STAT_ECS_K 0x00800000 /* pipeline clean */ - -#define NPE_STEVT 0x1B -#define NPE_STARTPC 0x1C -#define NPE_REGMAP 0x1E -#define NPE_CINDEX 0x1F - -#define INSTR_WR_REG_SHORT 0x0000C000 -#define INSTR_WR_REG_BYTE 0x00004000 -#define INSTR_RD_FIFO 0x0F888220 -#define INSTR_RESET_MBOX 0x0FAC8210 - -#define ECS_BG_CTXT_REG_0 0x00 /* Background Executing Context */ -#define ECS_BG_CTXT_REG_1 0x01 /* Stack level */ -#define ECS_BG_CTXT_REG_2 0x02 -#define ECS_PRI_1_CTXT_REG_0 0x04 /* Priority 1 Executing Context */ -#define ECS_PRI_1_CTXT_REG_1 0x05 /* Stack level */ -#define ECS_PRI_1_CTXT_REG_2 0x06 -#define ECS_PRI_2_CTXT_REG_0 0x08 /* Priority 2 Executing Context */ -#define ECS_PRI_2_CTXT_REG_1 0x09 /* Stack level */ -#define ECS_PRI_2_CTXT_REG_2 0x0A -#define ECS_DBG_CTXT_REG_0 0x0C /* Debug Executing Context */ -#define ECS_DBG_CTXT_REG_1 0x0D /* Stack level */ -#define ECS_DBG_CTXT_REG_2 0x0E -#define ECS_INSTRUCT_REG 0x11 /* NPE Instruction Register */ - -#define ECS_REG_0_ACTIVE 0x80000000 /* all levels */ -#define ECS_REG_0_NEXTPC_MASK 0x1FFF0000 /* BG/PRI1/PRI2 levels */ -#define ECS_REG_0_LDUR_BITS 8 -#define ECS_REG_0_LDUR_MASK 0x00000700 /* all levels */ -#define ECS_REG_1_CCTXT_BITS 16 -#define ECS_REG_1_CCTXT_MASK 0x000F0000 /* all levels */ -#define ECS_REG_1_SELCTXT_BITS 0 -#define ECS_REG_1_SELCTXT_MASK 0x0000000F /* all levels */ -#define ECS_DBG_REG_2_IF 0x00100000 /* debug level */ -#define ECS_DBG_REG_2_IE 0x00080000 /* debug level */ - -/* NPE watchpoint_fifo register bit */ -#define WFIFO_VALID 0x80000000 - -/* NPE messaging_status register bit definitions */ -#define MSGSTAT_OFNE 0x00010000 /* OutFifoNotEmpty */ -#define MSGSTAT_IFNF 0x00020000 /* InFifoNotFull */ -#define MSGSTAT_OFNF 0x00040000 /* OutFifoNotFull */ -#define MSGSTAT_IFNE 0x00080000 /* InFifoNotEmpty */ -#define MSGSTAT_MBINT 0x00100000 /* Mailbox interrupt */ -#define MSGSTAT_IFINT 0x00200000 /* InFifo interrupt */ -#define MSGSTAT_OFINT 0x00400000 /* OutFifo interrupt */ -#define MSGSTAT_WFINT 0x00800000 /* WatchFifo interrupt */ - -/* NPE messaging_control register bit definitions */ -#define MSGCTL_OUT_FIFO 0x00010000 /* enable output FIFO */ -#define MSGCTL_IN_FIFO 0x00020000 /* enable input FIFO */ -#define MSGCTL_OUT_FIFO_WRITE 0x01000000 /* enable FIFO + WRITE */ -#define MSGCTL_IN_FIFO_WRITE 0x02000000 - -/* NPE mailbox_status value for reset */ -#define RESET_MBOX_STAT 0x0000F0F0 - -#define NPE_A_FIRMWARE "NPE-A" -#define NPE_B_FIRMWARE "NPE-B" -#define NPE_C_FIRMWARE "NPE-C" - -const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE }; - -#define print_npe(pri, npe, fmt, ...) \ - printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__) - -#if DEBUG_MSG -#define debug_msg(npe, fmt, ...) \ - print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__) -#else -#define debug_msg(npe, fmt, ...) -#endif - -static struct { - u32 reg, val; -} ecs_reset[] = { - { ECS_BG_CTXT_REG_0, 0xA0000000 }, - { ECS_BG_CTXT_REG_1, 0x01000000 }, - { ECS_BG_CTXT_REG_2, 0x00008000 }, - { ECS_PRI_1_CTXT_REG_0, 0x20000080 }, - { ECS_PRI_1_CTXT_REG_1, 0x01000000 }, - { ECS_PRI_1_CTXT_REG_2, 0x00008000 }, - { ECS_PRI_2_CTXT_REG_0, 0x20000080 }, - { ECS_PRI_2_CTXT_REG_1, 0x01000000 }, - { ECS_PRI_2_CTXT_REG_2, 0x00008000 }, - { ECS_DBG_CTXT_REG_0, 0x20000000 }, - { ECS_DBG_CTXT_REG_1, 0x00000000 }, - { ECS_DBG_CTXT_REG_2, 0x001E0000 }, - { ECS_INSTRUCT_REG, 0x1003C00F }, -}; - -static struct npe npe_tab[NPE_COUNT] = { - { - .id = 0, - .regs = (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT, - .regs_phys = IXP4XX_NPEA_BASE_PHYS, - }, { - .id = 1, - .regs = (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT, - .regs_phys = IXP4XX_NPEB_BASE_PHYS, - }, { - .id = 2, - .regs = (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT, - .regs_phys = IXP4XX_NPEC_BASE_PHYS, - } -}; - -int npe_running(struct npe *npe) -{ - return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0; -} - -static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data) -{ - __raw_writel(data, &npe->regs->exec_data); - __raw_writel(addr, &npe->regs->exec_addr); - __raw_writel(cmd, &npe->regs->exec_status_cmd); -} - -static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd) -{ - __raw_writel(addr, &npe->regs->exec_addr); - __raw_writel(cmd, &npe->regs->exec_status_cmd); - /* Iintroduce extra read cycles after issuing read command to NPE - so that we read the register after the NPE has updated it. - This is to overcome race condition between XScale and NPE */ - __raw_readl(&npe->regs->exec_data); - __raw_readl(&npe->regs->exec_data); - return __raw_readl(&npe->regs->exec_data); -} - -static void npe_clear_active(struct npe *npe, u32 reg) -{ - u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG); - npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE); -} - -static void npe_start(struct npe *npe) -{ - /* ensure only Background Context Stack Level is active */ - npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0); - npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0); - npe_clear_active(npe, ECS_DBG_CTXT_REG_0); - - __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); - __raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd); -} - -static void npe_stop(struct npe *npe) -{ - __raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd); - __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/ -} - -static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx, - u32 ldur) -{ - u32 wc; - int i; - - /* set the Active bit, and the LDUR, in the debug level */ - npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, - ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS)); - - /* set CCTXT at ECS DEBUG L3 to specify in which context to execute - the instruction, and set SELCTXT at ECS DEBUG Level to specify - which context store to access. - Debug ECS Level Reg 1 has form 0x000n000n, where n = context number - */ - npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG, - (ctx << ECS_REG_1_CCTXT_BITS) | - (ctx << ECS_REG_1_SELCTXT_BITS)); - - /* clear the pipeline */ - __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); - - /* load NPE instruction into the instruction register */ - npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr); - - /* we need this value later to wait for completion of NPE execution - step */ - wc = __raw_readl(&npe->regs->watch_count); - - /* issue a Step One command via the Execution Control register */ - __raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd); - - /* Watch Count register increments when NPE completes an instruction */ - for (i = 0; i < MAX_RETRIES; i++) { - if (wc != __raw_readl(&npe->regs->watch_count)) - return 0; - udelay(1); - } - - print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n"); - return -ETIMEDOUT; -} - -static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr, - u8 val, u32 ctx) -{ - /* here we build the NPE assembler instruction: mov8 d0, #0 */ - u32 instr = INSTR_WR_REG_BYTE | /* OpCode */ - addr << 9 | /* base Operand */ - (val & 0x1F) << 4 | /* lower 5 bits to immediate data */ - (val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */ - return npe_debug_instr(npe, instr, ctx, 1); /* execute it */ -} - -static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr, - u16 val, u32 ctx) -{ - /* here we build the NPE assembler instruction: mov16 d0, #0 */ - u32 instr = INSTR_WR_REG_SHORT | /* OpCode */ - addr << 9 | /* base Operand */ - (val & 0x1F) << 4 | /* lower 5 bits to immediate data */ - (val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */ - return npe_debug_instr(npe, instr, ctx, 1); /* execute it */ -} - -static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr, - u32 val, u32 ctx) -{ - /* write in 16 bit steps first the high and then the low value */ - if (npe_logical_reg_write16(npe, addr, val >> 16, ctx)) - return -ETIMEDOUT; - return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx); -} - -static int npe_reset(struct npe *npe) -{ - u32 val, ctl, exec_count, ctx_reg2; - int i; - - ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) & - 0x3F3FFFFF; - - /* disable parity interrupt */ - __raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control); - - /* pre exec - debug instruction */ - /* turn off the halt bit by clearing Execution Count register. */ - exec_count = __raw_readl(&npe->regs->exec_count); - __raw_writel(0, &npe->regs->exec_count); - /* ensure that IF and IE are on (temporarily), so that we don't end up - stepping forever */ - ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG); - npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 | - ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE); - - /* clear the FIFOs */ - while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID) - ; - while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) - /* read from the outFIFO until empty */ - print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n", - __raw_readl(&npe->regs->in_out_fifo)); - - while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) - /* step execution of the NPE intruction to read inFIFO using - the Debug Executing Context stack */ - if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0)) - return -ETIMEDOUT; - - /* reset the mailbox reg from the XScale side */ - __raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status); - /* from NPE side */ - if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0)) - return -ETIMEDOUT; - - /* Reset the physical registers in the NPE register file */ - for (val = 0; val < NPE_PHYS_REG; val++) { - if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0)) - return -ETIMEDOUT; - /* address is either 0 or 4 */ - if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0)) - return -ETIMEDOUT; - } - - /* Reset the context store = each context's Context Store registers */ - - /* Context 0 has no STARTPC. Instead, this value is used to set NextPC - for Background ECS, to set where NPE starts executing code */ - val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG); - val &= ~ECS_REG_0_NEXTPC_MASK; - val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK; - npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val); - - for (i = 0; i < 16; i++) { - if (i) { /* Context 0 has no STEVT nor STARTPC */ - /* STEVT = off, 0x80 */ - if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i)) - return -ETIMEDOUT; - if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i)) - return -ETIMEDOUT; - } - /* REGMAP = d0->p0, d8->p2, d16->p4 */ - if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i)) - return -ETIMEDOUT; - if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i)) - return -ETIMEDOUT; - } - - /* post exec */ - /* clear active bit in debug level */ - npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0); - /* clear the pipeline */ - __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); - /* restore previous values */ - __raw_writel(exec_count, &npe->regs->exec_count); - npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2); - - /* write reset values to Execution Context Stack registers */ - for (val = 0; val < ARRAY_SIZE(ecs_reset); val++) - npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG, - ecs_reset[val].val); - - /* clear the profile counter */ - __raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd); - - __raw_writel(0, &npe->regs->exec_count); - __raw_writel(0, &npe->regs->action_points[0]); - __raw_writel(0, &npe->regs->action_points[1]); - __raw_writel(0, &npe->regs->action_points[2]); - __raw_writel(0, &npe->regs->action_points[3]); - __raw_writel(0, &npe->regs->watch_count); - - val = ixp4xx_read_feature_bits(); - /* reset the NPE */ - ixp4xx_write_feature_bits(val & - ~(IXP4XX_FEATURE_RESET_NPEA << npe->id)); - /* deassert reset */ - ixp4xx_write_feature_bits(val | - (IXP4XX_FEATURE_RESET_NPEA << npe->id)); - for (i = 0; i < MAX_RETRIES; i++) { - if (ixp4xx_read_feature_bits() & - (IXP4XX_FEATURE_RESET_NPEA << npe->id)) - break; /* NPE is back alive */ - udelay(1); - } - if (i == MAX_RETRIES) - return -ETIMEDOUT; - - npe_stop(npe); - - /* restore NPE configuration bus Control Register - parity settings */ - __raw_writel(ctl, &npe->regs->messaging_control); - return 0; -} - - -int npe_send_message(struct npe *npe, const void *msg, const char *what) -{ - const u32 *send = msg; - int cycles = 0; - - debug_msg(npe, "Trying to send message %s [%08X:%08X]\n", - what, send[0], send[1]); - - if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) { - debug_msg(npe, "NPE input FIFO not empty\n"); - return -EIO; - } - - __raw_writel(send[0], &npe->regs->in_out_fifo); - - if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) { - debug_msg(npe, "NPE input FIFO full\n"); - return -EIO; - } - - __raw_writel(send[1], &npe->regs->in_out_fifo); - - while ((cycles < MAX_RETRIES) && - (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) { - udelay(1); - cycles++; - } - - if (cycles == MAX_RETRIES) { - debug_msg(npe, "Timeout sending message\n"); - return -ETIMEDOUT; - } - -#if DEBUG_MSG > 1 - debug_msg(npe, "Sending a message took %i cycles\n", cycles); -#endif - return 0; -} - -int npe_recv_message(struct npe *npe, void *msg, const char *what) -{ - u32 *recv = msg; - int cycles = 0, cnt = 0; - - debug_msg(npe, "Trying to receive message %s\n", what); - - while (cycles < MAX_RETRIES) { - if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) { - recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo); - if (cnt == 2) - break; - } else { - udelay(1); - cycles++; - } - } - - switch(cnt) { - case 1: - debug_msg(npe, "Received [%08X]\n", recv[0]); - break; - case 2: - debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]); - break; - } - - if (cycles == MAX_RETRIES) { - debug_msg(npe, "Timeout waiting for message\n"); - return -ETIMEDOUT; - } - -#if DEBUG_MSG > 1 - debug_msg(npe, "Receiving a message took %i cycles\n", cycles); -#endif - return 0; -} - -int npe_send_recv_message(struct npe *npe, void *msg, const char *what) -{ - int result; - u32 *send = msg, recv[2]; - - if ((result = npe_send_message(npe, msg, what)) != 0) - return result; - if ((result = npe_recv_message(npe, recv, what)) != 0) - return result; - - if ((recv[0] != send[0]) || (recv[1] != send[1])) { - debug_msg(npe, "Message %s: unexpected message received\n", - what); - return -EIO; - } - return 0; -} - - -int npe_load_firmware(struct npe *npe, const char *name, struct device *dev) -{ - const struct firmware *fw_entry; - - struct dl_block { - u32 type; - u32 offset; - } *blk; - - struct dl_image { - u32 magic; - u32 id; - u32 size; - union { - u32 data[0]; - struct dl_block blocks[0]; - }; - } *image; - - struct dl_codeblock { - u32 npe_addr; - u32 size; - u32 data[0]; - } *cb; - - int i, j, err, data_size, instr_size, blocks, table_end; - u32 cmd; - - if ((err = request_firmware(&fw_entry, name, dev)) != 0) - return err; - - err = -EINVAL; - if (fw_entry->size < sizeof(struct dl_image)) { - print_npe(KERN_ERR, npe, "incomplete firmware file\n"); - goto err; - } - image = (struct dl_image*)fw_entry->data; - -#if DEBUG_FW - print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n", - image->magic, image->id, image->size, image->size * 4); -#endif - - if (image->magic == swab32(FW_MAGIC)) { /* swapped file */ - image->id = swab32(image->id); - image->size = swab32(image->size); - } else if (image->magic != FW_MAGIC) { - print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n", - image->magic); - goto err; - } - if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) { - print_npe(KERN_ERR, npe, - "inconsistent size of firmware file\n"); - goto err; - } - if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) { - print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n"); - goto err; - } - if (image->magic == swab32(FW_MAGIC)) - for (i = 0; i < image->size; i++) - image->data[i] = swab32(image->data[i]); - - if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) { - print_npe(KERN_INFO, npe, "IXP43x/IXP46x firmware ignored on " - "IXP42x\n"); - goto err; - } - - if (npe_running(npe)) { - print_npe(KERN_INFO, npe, "unable to load firmware, NPE is " - "already running\n"); - err = -EBUSY; - goto err; - } -#if 0 - npe_stop(npe); - npe_reset(npe); -#endif - - print_npe(KERN_INFO, npe, "firmware functionality 0x%X, " - "revision 0x%X:%X\n", (image->id >> 16) & 0xFF, - (image->id >> 8) & 0xFF, image->id & 0xFF); - - if (cpu_is_ixp42x()) { - if (!npe->id) - instr_size = NPE_A_42X_INSTR_SIZE; - else - instr_size = NPE_B_AND_C_42X_INSTR_SIZE; - data_size = NPE_42X_DATA_SIZE; - } else { - instr_size = NPE_46X_INSTR_SIZE; - data_size = NPE_46X_DATA_SIZE; - } - - for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size; - blocks++) - if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF) - break; - if (blocks * sizeof(struct dl_block) / 4 >= image->size) { - print_npe(KERN_INFO, npe, "firmware EOF block marker not " - "found\n"); - goto err; - } - -#if DEBUG_FW - print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks); -#endif - - table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */; - for (i = 0, blk = image->blocks; i < blocks; i++, blk++) { - if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4 - || blk->offset < table_end) { - print_npe(KERN_INFO, npe, "invalid offset 0x%X of " - "firmware block #%i\n", blk->offset, i); - goto err; - } - - cb = (struct dl_codeblock*)&image->data[blk->offset]; - if (blk->type == FW_BLOCK_TYPE_INSTR) { - if (cb->npe_addr + cb->size > instr_size) - goto too_big; - cmd = CMD_WR_INS_MEM; - } else if (blk->type == FW_BLOCK_TYPE_DATA) { - if (cb->npe_addr + cb->size > data_size) - goto too_big; - cmd = CMD_WR_DATA_MEM; - } else { - print_npe(KERN_INFO, npe, "invalid firmware block #%i " - "type 0x%X\n", i, blk->type); - goto err; - } - if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) { - print_npe(KERN_INFO, npe, "firmware block #%i doesn't " - "fit in firmware image: type %c, start 0x%X," - " length 0x%X\n", i, - blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D', - cb->npe_addr, cb->size); - goto err; - } - - for (j = 0; j < cb->size; j++) - npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]); - } - - npe_start(npe); - if (!npe_running(npe)) - print_npe(KERN_ERR, npe, "unable to start\n"); - release_firmware(fw_entry); - return 0; - -too_big: - print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE " - "memory: type %c, start 0x%X, length 0x%X\n", i, - blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D', - cb->npe_addr, cb->size); -err: - release_firmware(fw_entry); - return err; -} - - -struct npe *npe_request(unsigned id) -{ - if (id < NPE_COUNT) - if (npe_tab[id].valid) - if (try_module_get(THIS_MODULE)) - return &npe_tab[id]; - return NULL; -} - -void npe_release(struct npe *npe) -{ - module_put(THIS_MODULE); -} - - -static int __init npe_init_module(void) -{ - - int i, found = 0; - - for (i = 0; i < NPE_COUNT; i++) { - struct npe *npe = &npe_tab[i]; - if (!(ixp4xx_read_feature_bits() & - (IXP4XX_FEATURE_RESET_NPEA << i))) - continue; /* NPE already disabled or not present */ - if (!(npe->mem_res = request_mem_region(npe->regs_phys, - REGS_SIZE, - npe_name(npe)))) { - print_npe(KERN_ERR, npe, - "failed to request memory region\n"); - continue; - } - - if (npe_reset(npe)) - continue; - npe->valid = 1; - found++; - } - - if (!found) - return -ENODEV; - return 0; -} - -static void __exit npe_cleanup_module(void) -{ - int i; - - for (i = 0; i < NPE_COUNT; i++) - if (npe_tab[i].mem_res) { - npe_reset(&npe_tab[i]); - release_resource(npe_tab[i].mem_res); - } -} - -module_init(npe_init_module); -module_exit(npe_cleanup_module); - -MODULE_AUTHOR("Krzysztof Halasa"); -MODULE_LICENSE("GPL v2"); -MODULE_FIRMWARE(NPE_A_FIRMWARE); -MODULE_FIRMWARE(NPE_B_FIRMWARE); -MODULE_FIRMWARE(NPE_C_FIRMWARE); - -EXPORT_SYMBOL(npe_names); -EXPORT_SYMBOL(npe_running); -EXPORT_SYMBOL(npe_request); -EXPORT_SYMBOL(npe_release); -EXPORT_SYMBOL(npe_load_firmware); -EXPORT_SYMBOL(npe_send_message); -EXPORT_SYMBOL(npe_recv_message); -EXPORT_SYMBOL(npe_send_recv_message); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c deleted file mode 100644 index 9d1b6b7c394c..000000000000 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ /dev/null @@ -1,372 +0,0 @@ -/* - * Intel IXP4xx Queue Manager driver for Linux - * - * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - */ - -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <mach/qmgr.h> - -static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; -static struct resource *mem_res; -static spinlock_t qmgr_lock; -static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ -static void (*irq_handlers[QUEUES])(void *pdev); -static void *irq_pdevs[QUEUES]; - -#if DEBUG_QMGR -char qmgr_queue_descs[QUEUES][32]; -#endif - -void qmgr_set_irq(unsigned int queue, int src, - void (*handler)(void *pdev), void *pdev) -{ - unsigned long flags; - - spin_lock_irqsave(&qmgr_lock, flags); - if (queue < HALF_QUEUES) { - u32 __iomem *reg; - int bit; - BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL); - reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */ - bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */ - __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), - reg); - } else - /* IRQ source for queues 32-63 is fixed */ - BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY); - - irq_handlers[queue] = handler; - irq_pdevs[queue] = pdev; - spin_unlock_irqrestore(&qmgr_lock, flags); -} - - -static irqreturn_t qmgr_irq1_a0(int irq, void *pdev) -{ - int i, ret = 0; - u32 en_bitmap, src, stat; - - /* ACK - it may clear any bits so don't rely on it */ - __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]); - - en_bitmap = qmgr_regs->irqen[0]; - while (en_bitmap) { - i = __fls(en_bitmap); /* number of the last "low" queue */ - en_bitmap &= ~BIT(i); - src = qmgr_regs->irqsrc[i >> 3]; - stat = qmgr_regs->stat1[i >> 3]; - if (src & 4) /* the IRQ condition is inverted */ - stat = ~stat; - if (stat & BIT(src & 3)) { - irq_handlers[i](irq_pdevs[i]); - ret = IRQ_HANDLED; - } - } - return ret; -} - - -static irqreturn_t qmgr_irq2_a0(int irq, void *pdev) -{ - int i, ret = 0; - u32 req_bitmap; - - /* ACK - it may clear any bits so don't rely on it */ - __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]); - - req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h; - while (req_bitmap) { - i = __fls(req_bitmap); /* number of the last "high" queue */ - req_bitmap &= ~BIT(i); - irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]); - ret = IRQ_HANDLED; - } - return ret; -} - - -static irqreturn_t qmgr_irq(int irq, void *pdev) -{ - int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1); - u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]); - - if (!req_bitmap) - return 0; - __raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */ - - while (req_bitmap) { - i = __fls(req_bitmap); /* number of the last queue */ - req_bitmap &= ~BIT(i); - i += half * HALF_QUEUES; - irq_handlers[i](irq_pdevs[i]); - } - return IRQ_HANDLED; -} - - -void qmgr_enable_irq(unsigned int queue) -{ - unsigned long flags; - int half = queue / 32; - u32 mask = 1 << (queue & (HALF_QUEUES - 1)); - - spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask, - &qmgr_regs->irqen[half]); - spin_unlock_irqrestore(&qmgr_lock, flags); -} - -void qmgr_disable_irq(unsigned int queue) -{ - unsigned long flags; - int half = queue / 32; - u32 mask = 1 << (queue & (HALF_QUEUES - 1)); - - spin_lock_irqsave(&qmgr_lock, flags); - __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask, - &qmgr_regs->irqen[half]); - __raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */ - spin_unlock_irqrestore(&qmgr_lock, flags); -} - -static inline void shift_mask(u32 *mask) -{ - mask[3] = mask[3] << 1 | mask[2] >> 31; - mask[2] = mask[2] << 1 | mask[1] >> 31; - mask[1] = mask[1] << 1 | mask[0] >> 31; - mask[0] <<= 1; -} - -#if DEBUG_QMGR -int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, - unsigned int nearly_empty_watermark, - unsigned int nearly_full_watermark, - const char *desc_format, const char* name) -#else -int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, - unsigned int nearly_empty_watermark, - unsigned int nearly_full_watermark) -#endif -{ - u32 cfg, addr = 0, mask[4]; /* in 16-dwords */ - int err; - - BUG_ON(queue >= QUEUES); - - if ((nearly_empty_watermark | nearly_full_watermark) & ~7) - return -EINVAL; - - switch (len) { - case 16: - cfg = 0 << 24; - mask[0] = 0x1; - break; - case 32: - cfg = 1 << 24; - mask[0] = 0x3; - break; - case 64: - cfg = 2 << 24; - mask[0] = 0xF; - break; - case 128: - cfg = 3 << 24; - mask[0] = 0xFF; - break; - default: - return -EINVAL; - } - - cfg |= nearly_empty_watermark << 26; - cfg |= nearly_full_watermark << 29; - len /= 16; /* in 16-dwords: 1, 2, 4 or 8 */ - mask[1] = mask[2] = mask[3] = 0; - - if (!try_module_get(THIS_MODULE)) - return -ENODEV; - - spin_lock_irq(&qmgr_lock); - if (__raw_readl(&qmgr_regs->sram[queue])) { - err = -EBUSY; - goto err; - } - - while (1) { - if (!(used_sram_bitmap[0] & mask[0]) && - !(used_sram_bitmap[1] & mask[1]) && - !(used_sram_bitmap[2] & mask[2]) && - !(used_sram_bitmap[3] & mask[3])) - break; /* found free space */ - - addr++; - shift_mask(mask); - if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) { - printk(KERN_ERR "qmgr: no free SRAM space for" - " queue %i\n", queue); - err = -ENOMEM; - goto err; - } - } - - used_sram_bitmap[0] |= mask[0]; - used_sram_bitmap[1] |= mask[1]; - used_sram_bitmap[2] |= mask[2]; - used_sram_bitmap[3] |= mask[3]; - __raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]); -#if DEBUG_QMGR - snprintf(qmgr_queue_descs[queue], sizeof(qmgr_queue_descs[0]), - desc_format, name); - printk(KERN_DEBUG "qmgr: requested queue %s(%i) addr = 0x%02X\n", - qmgr_queue_descs[queue], queue, addr); -#endif - spin_unlock_irq(&qmgr_lock); - return 0; - -err: - spin_unlock_irq(&qmgr_lock); - module_put(THIS_MODULE); - return err; -} - -void qmgr_release_queue(unsigned int queue) -{ - u32 cfg, addr, mask[4]; - - BUG_ON(queue >= QUEUES); /* not in valid range */ - - spin_lock_irq(&qmgr_lock); - cfg = __raw_readl(&qmgr_regs->sram[queue]); - addr = (cfg >> 14) & 0xFF; - - BUG_ON(!addr); /* not requested */ - - switch ((cfg >> 24) & 3) { - case 0: mask[0] = 0x1; break; - case 1: mask[0] = 0x3; break; - case 2: mask[0] = 0xF; break; - case 3: mask[0] = 0xFF; break; - } - - mask[1] = mask[2] = mask[3] = 0; - - while (addr--) - shift_mask(mask); - -#if DEBUG_QMGR - printk(KERN_DEBUG "qmgr: releasing queue %s(%i)\n", - qmgr_queue_descs[queue], queue); - qmgr_queue_descs[queue][0] = '\x0'; -#endif - - while ((addr = qmgr_get_entry(queue))) - printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", - queue, addr); - - __raw_writel(0, &qmgr_regs->sram[queue]); - - used_sram_bitmap[0] &= ~mask[0]; - used_sram_bitmap[1] &= ~mask[1]; - used_sram_bitmap[2] &= ~mask[2]; - used_sram_bitmap[3] &= ~mask[3]; - irq_handlers[queue] = NULL; /* catch IRQ bugs */ - spin_unlock_irq(&qmgr_lock); - - module_put(THIS_MODULE); -} - -static int qmgr_init(void) -{ - int i, err; - irq_handler_t handler1, handler2; - - mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS, - IXP4XX_QMGR_REGION_SIZE, - "IXP4xx Queue Manager"); - if (mem_res == NULL) - return -EBUSY; - - /* reset qmgr registers */ - for (i = 0; i < 4; i++) { - __raw_writel(0x33333333, &qmgr_regs->stat1[i]); - __raw_writel(0, &qmgr_regs->irqsrc[i]); - } - for (i = 0; i < 2; i++) { - __raw_writel(0, &qmgr_regs->stat2[i]); - __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */ - __raw_writel(0, &qmgr_regs->irqen[i]); - } - - __raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h); - __raw_writel(0, &qmgr_regs->statf_h); - - for (i = 0; i < QUEUES; i++) - __raw_writel(0, &qmgr_regs->sram[i]); - - if (cpu_is_ixp42x_rev_a0()) { - handler1 = qmgr_irq1_a0; - handler2 = qmgr_irq2_a0; - } else - handler1 = handler2 = qmgr_irq; - - err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager", - NULL); - if (err) { - printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", - IRQ_IXP4XX_QM1, err); - goto error_irq; - } - - err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager", - NULL); - if (err) { - printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", - IRQ_IXP4XX_QM2, err); - goto error_irq2; - } - - used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */ - spin_lock_init(&qmgr_lock); - - printk(KERN_INFO "IXP4xx Queue Manager initialized.\n"); - return 0; - -error_irq2: - free_irq(IRQ_IXP4XX_QM1, NULL); -error_irq: - release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); - return err; -} - -static void qmgr_remove(void) -{ - free_irq(IRQ_IXP4XX_QM1, NULL); - free_irq(IRQ_IXP4XX_QM2, NULL); - synchronize_irq(IRQ_IXP4XX_QM1); - synchronize_irq(IRQ_IXP4XX_QM2); - release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); -} - -module_init(qmgr_init); -module_exit(qmgr_remove); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Krzysztof Halasa"); - -EXPORT_SYMBOL(qmgr_set_irq); -EXPORT_SYMBOL(qmgr_enable_irq); -EXPORT_SYMBOL(qmgr_disable_irq); -#if DEBUG_QMGR -EXPORT_SYMBOL(qmgr_queue_descs); -EXPORT_SYMBOL(qmgr_request_queue); -#else -EXPORT_SYMBOL(__qmgr_request_queue); -#endif -EXPORT_SYMBOL(qmgr_release_queue); diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c index d114ccd2017c..55a36537ee1a 100644 --- a/arch/arm/mach-ixp4xx/miccpt-pci.c +++ b/arch/arm/mach-ixp4xx/miccpt-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-ixp4xx/miccpt-pci.c * @@ -8,11 +9,6 @@ * Copyright (C) 2006 OMICRON electronics GmbH * * Author: Michael Jochum <michael.jochum@omicron.at> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -25,6 +21,8 @@ #include <mach/hardware.h> #include <asm/mach-types.h> +#include "irqs.h" + #define MAX_DEV 4 #define IRQ_LINES 4 diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c index 8f0eba0a6800..1176f9cb4865 100644 --- a/arch/arm/mach-ixp4xx/nas100d-pci.c +++ b/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-ixp4xx/nas100d-pci.c * @@ -8,11 +9,6 @@ * Copyright (C) 2003-2004 MontaVista Software, Inc. * * Maintainer: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/pci.h> @@ -21,6 +17,8 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> +#include "irqs.h" + #define MAX_DEV 3 #define IRQ_LINES 3 diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 4138d6aa4c52..c142cfa8c5d6 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -34,6 +34,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + #define NAS100D_SDA_PIN 5 #define NAS100D_SCL_PIN 6 @@ -279,9 +281,6 @@ static void __init nas100d_init(void) ixp4xx_sys_init(); - /* gpio 14 and 15 are _not_ clocks */ - *IXP4XX_GPIO_GPCLKR = 0; - nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); nas100d_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c index 032defe111aa..c07936a1d736 100644 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-ixp4xx/nslu2-pci.c * @@ -8,11 +9,6 @@ * Copyright (C) 2003-2004 MontaVista Software, Inc. * * Maintainer: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/pci.h> @@ -21,6 +17,8 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> +#include "irqs.h" + #define MAX_DEV 3 #define IRQ_LINES 3 diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 341b263482ef..ee1877fcfafe 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -32,6 +32,8 @@ #include <asm/mach/flash.h> #include <asm/mach/time.h> +#include "irqs.h" + #define NSLU2_SDA_PIN 7 #define NSLU2_SCL_PIN 6 @@ -125,10 +127,18 @@ static struct platform_device nslu2_i2c_gpio = { }, }; +static struct resource nslu2_beeper_resources[] = { + { + .start = IRQ_IXP4XX_TIMER2, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device nslu2_beeper = { .name = "ixp4xx-beeper", .id = NSLU2_GPIO_BUZZ, - .num_resources = 0, + .resource = nslu2_beeper_resources, + .num_resources = ARRAY_SIZE(nslu2_beeper_resources), }; static struct resource nslu2_uart_resources[] = { diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c index 2d494b454376..6ed5a9aed600 100644 --- a/arch/arm/mach-ixp4xx/omixp-setup.c +++ b/arch/arm/mach-ixp4xx/omixp-setup.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-ixp4xx/omixp-setup.c * @@ -6,10 +7,6 @@ * * based nslu2-setup.c, ixdp425-setup.c: * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> @@ -27,6 +24,8 @@ #include <mach/hardware.h> +#include "irqs.h" + static struct resource omixp_flash_resources[] = { { .flags = IORESOURCE_MEM, diff --git a/arch/arm/mach-ixp4xx/vulcan-pci.c b/arch/arm/mach-ixp4xx/vulcan-pci.c index a4220fa5e0c3..caf53922dd3f 100644 --- a/arch/arm/mach-ixp4xx/vulcan-pci.c +++ b/arch/arm/mach-ixp4xx/vulcan-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arch/mach-ixp4xx/vulcan-pci.c * @@ -8,11 +9,6 @@ * based on ixdp425-pci.c: * Copyright (C) 2002 Intel Corporation. * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/pci.h> @@ -21,6 +17,8 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> +#include "irqs.h" + /* PCI controller GPIO to IRQ pin mappings */ #define INTA 2 #define INTB 3 diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index 2c03d2f6b647..d2ebb7c675a8 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -22,6 +22,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + static struct flash_platform_data vulcan_flash_data = { .map_name = "cfi_probe", .width = 2, diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c index c92e5b82af36..1247e7c67bc0 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-pci.c +++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arch/mach-ixp4xx/wg302v2-pci.c * @@ -10,11 +11,6 @@ * Copyright (C) 2003 MontaVista Software, Inc. * * Maintainer: Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -27,6 +23,8 @@ #include <asm/mach/pci.h> +#include "irqs.h" + void __init wg302v2_pci_preinit(void) { irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c index 90b3c604e8b6..8711e299229b 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -29,6 +29,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + static struct flash_platform_data wg302v2_flash_data = { .map_name = "cfi_probe", .width = 2, diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index db122356b410..cfd39f729f8e 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only config ARCH_KEYSTONE bool "Texas Instruments Keystone Devices" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index 84613abf35a3..638808c4e122 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Keystone2 based boards and SOC related code. * * Copyright 2013 Texas Instruments, Inc. * Cyril Chemparathy <cyril@ti.com> * Santosh Shilimkar <santosh.shillimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. */ #include <linux/io.h> #include <linux/of.h> diff --git a/arch/arm/mach-keystone/keystone.h b/arch/arm/mach-keystone/keystone.h index 33eaa037af5a..438e531cc007 100644 --- a/arch/arm/mach-keystone/keystone.h +++ b/arch/arm/mach-keystone/keystone.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2013 Texas Instruments, Inc. * Cyril Chemparathy <cyril@ti.com> * Santosh Shilimkar <santosh.shillimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. */ #ifndef __KEYSTONE_H__ diff --git a/arch/arm/mach-keystone/memory.h b/arch/arm/mach-keystone/memory.h index b854fb18eef1..9147565d0581 100644 --- a/arch/arm/mach-keystone/memory.h +++ b/arch/arm/mach-keystone/memory.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2014 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. */ #ifndef __MEMORY_H #define __MEMORY_H diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c index 5665276972ec..c810e23a8fa0 100644 --- a/arch/arm/mach-keystone/platsmp.c +++ b/arch/arm/mach-keystone/platsmp.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Keystone SOC SMP platform code * @@ -6,10 +7,6 @@ * Santosh Shilimkar <santosh.shillimkar@ti.com> * * Based on platsmp.c, Copyright (C) 2002 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c index abca83d22ff3..5eea01cbecf0 100644 --- a/arch/arm/mach-keystone/pm_domain.c +++ b/arch/arm/mach-keystone/pm_domain.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * PM domain driver for Keystone2 devices * @@ -6,10 +7,6 @@ * * Based on Kevins work on DAVINCI SOCs * Kevin Hilman <khilman@linaro.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S index d15de8179fab..76d0bf6ac73c 100644 --- a/arch/arm/mach-keystone/smc.S +++ b/arch/arm/mach-keystone/smc.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Keystone Secure APIs * * Copyright (C) 2013 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software,you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig index b3185c05fffa..724d7d039f74 100644 --- a/arch/arm/mach-ks8695/Kconfig +++ b/arch/arm/mach-ks8695/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only if ARCH_KS8695 menu "Kendin/Micrel KS8695 Implementations" diff --git a/arch/arm/mach-ks8695/Makefile.boot b/arch/arm/mach-ks8695/Makefile.boot index c9b0bebcf237..cf32eb605bd8 100644 --- a/arch/arm/mach-ks8695/Makefile.boot +++ b/arch/arm/mach-ks8695/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # Note: the following conditions must always be true: # ZRELADDR == virt_to_phys(TEXTADDR) # PARAMS_PHYS must be within 4MB of ZRELADDR diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index 5783062224c3..f319258d1226 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-ks8695/board-acs5k.c * @@ -5,10 +6,6 @@ * * Copyright 2008 Simtec Electronics * Daniel Silverstone <dsilvers@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c index 13537e9c5485..d5f435cae6e0 100644 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ b/arch/arm/mach-ks8695/board-dsm320.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-ks8695/board-dsm320.c * @@ -5,10 +6,6 @@ * * Copyright 2008 Simtec Electronics * Daniel Silverstone <dsilvers@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index 69cfb9935fc1..bf8856ce3fbb 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-ks8695/board-micrel.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c index 478ebd1f2b0f..12ffe9227f9c 100644 --- a/arch/arm/mach-ks8695/board-og.c +++ b/arch/arm/mach-ks8695/board-og.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * board-og.c -- support for the OpenGear KS8695 based boards. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c index 46e455c3821b..d5ec85a56375 100644 --- a/arch/arm/mach-ks8695/board-sg.c +++ b/arch/arm/mach-ks8695/board-sg.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * board-sg.c -- support for the SnapGear KS8695 based boards - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c index 7a1c4caa1ab5..aa6bb0c93aa8 100644 --- a/arch/arm/mach-ks8695/cpu.c +++ b/arch/arm/mach-ks8695/cpu.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ks8695/cpu.c * @@ -5,20 +6,6 @@ * Copyright (C) 2006 Simtec Electronics * * KS8695 CPU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/arch/arm/mach-ks8695/devices.h b/arch/arm/mach-ks8695/devices.h index 1e6594a0f297..cc23ee3820ea 100644 --- a/arch/arm/mach-ks8695/devices.h +++ b/arch/arm/mach-ks8695/devices.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ks8695/include/mach/devices.h * * Copyright (C) 2006 Andrew Victor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_DEVICES_H diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h index 43253f8e6de4..9e9cbdd436a9 100644 --- a/arch/arm/mach-ks8695/generic.h +++ b/arch/arm/mach-ks8695/generic.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-ks8695/generic.h * * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> * Copyright (C) 2006 Simtec Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ extern __init void ks8695_map_io(void); diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S index 8315b34f32ff..7ff812cb010b 100644 --- a/arch/arm/mach-ks8695/include/mach/entry-macro.S +++ b/arch/arm/mach-ks8695/include/mach/entry-macro.S @@ -42,6 +42,6 @@ moveq \irqstat, \irqstat, lsr #2 addeq \irqnr, \irqnr, #2 tst \irqstat, #0x01 - addeqs \irqnr, \irqnr, #1 + addseq \irqnr, \irqnr, #1 1001: .endm diff --git a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h index 6eb034d60325..600115f48fb3 100644 --- a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h +++ b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2006 Andrew Victor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __MACH_KS8659_GPIO_H diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h index 959c748ee8bb..0fb889be8112 100644 --- a/arch/arm/mach-ks8695/include/mach/hardware.h +++ b/arch/arm/mach-ks8695/include/mach/hardware.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ks8695/include/mach/hardware.h * @@ -5,16 +6,12 @@ * Copyright (C) 2006 Simtec Electronics * * KS8695 - Memory Map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include <asm/sizes.h> +#include <linux/sizes.h> /* * Clocks are derived from MCLK, which is 25MHz diff --git a/arch/arm/mach-ks8695/include/mach/irqs.h b/arch/arm/mach-ks8695/include/mach/irqs.h index 86fc9e6ce404..0cbb30672427 100644 --- a/arch/arm/mach-ks8695/include/mach/irqs.h +++ b/arch/arm/mach-ks8695/include/mach/irqs.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ks8695/include/mach/irqs.h * * Copyright (C) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_IRQS_H diff --git a/arch/arm/mach-ks8695/include/mach/regs-uart.h b/arch/arm/mach-ks8695/include/mach/regs-uart.h index 8581fbc6245f..941a542c5f23 100644 --- a/arch/arm/mach-ks8695/include/mach/regs-uart.h +++ b/arch/arm/mach-ks8695/include/mach/regs-uart.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ks8695/include/mach/regs-uart.h * @@ -5,10 +6,6 @@ * Copyright (C) 2006 Simtec Electronics * * KS8695 - UART register and bit definitions. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef KS8695_UART_H diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h index a001c7c34df2..dc78a29759b5 100644 --- a/arch/arm/mach-ks8695/include/mach/uncompress.h +++ b/arch/arm/mach-ks8695/include/mach/uncompress.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-ks8695/include/mach/uncompress.h * @@ -5,10 +6,6 @@ * Copyright (C) 2006 Simtec Electronics * * KS8695 - Kernel uncompressor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_UNCOMPRESS_H diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c index 31439f2ee21e..4b7ec8d9300c 100644 --- a/arch/arm/mach-ks8695/irq.c +++ b/arch/arm/mach-ks8695/irq.c @@ -1,22 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ks8695/irq.c * * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> * Copyright (C) 2006 Simtec Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c index 577a35f75c8a..83f330bf07dd 100644 --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ks8695/pci.c * @@ -5,20 +6,6 @@ * Copyright (C) 2006, Greg Ungerer <gerg@snapgear.com> * Copyright (C) 2006, Ben Dooks * Copyright (C) 2007, Andrew Victor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c index 18eb0fbd8d82..50561eec0c32 100644 --- a/arch/arm/mach-ks8695/time.c +++ b/arch/arm/mach-ks8695/time.c @@ -1,22 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-ks8695/time.c * * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> * Copyright (C) 2006 Simtec Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> diff --git a/arch/arm/mach-lpc18xx/Makefile b/arch/arm/mach-lpc18xx/Makefile index bd0b7b5d6e9d..c80d80c199d3 100644 --- a/arch/arm/mach-lpc18xx/Makefile +++ b/arch/arm/mach-lpc18xx/Makefile @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-y += board-dt.o diff --git a/arch/arm/mach-lpc18xx/Makefile.boot b/arch/arm/mach-lpc18xx/Makefile.boot index eacfc3f5c33e..cec195d4fcba 100644 --- a/arch/arm/mach-lpc18xx/Makefile.boot +++ b/arch/arm/mach-lpc18xx/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # Empty file waiting for deletion once Makefile.boot isn't needed any more. # Patch waits for application at # http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile index 79b6b07e115d..3bac1d17a207 100644 --- a/arch/arm/mach-lpc32xx/Makefile +++ b/arch/arm/mach-lpc32xx/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel. # diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot index d7392a475247..37d09ddb27f8 100644 --- a/arch/arm/mach-lpc32xx/Makefile.boot +++ b/arch/arm/mach-lpc32xx/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x82000000 diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index 2f6067bce7c3..5b71b4fab2cd 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -1,19 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-lpc32xx/common.c * * Author: Kevin Wells <kevin.wells@nxp.com> * * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/init.h> diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 02575c2444e4..8e597ce48a73 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -1,19 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-lpc32xx/common.h * * Author: Kevin Wells <kevin.wells@nxp.com> * * Copyright (C) 2009-2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __LPC32XX_COMMON_H diff --git a/arch/arm/mach-lpc32xx/include/mach/board.h b/arch/arm/mach-lpc32xx/include/mach/board.h index 52531ca7bd1d..476513d970a4 100644 --- a/arch/arm/mach-lpc32xx/include/mach/board.h +++ b/arch/arm/mach-lpc32xx/include/mach/board.h @@ -1,19 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arm/arch/mach-lpc32xx/include/mach/board.h * * Author: Kevin Wells <kevin.wells@nxp.com> * * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __ASM_ARCH_BOARD_H diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S index 24ca11b377c8..eec0f5f7e722 100644 --- a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S +++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S @@ -1,19 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-lpc32xx/include/mach/entry-macro.S * * Author: Kevin Wells <kevin.wells@nxp.com> * * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <mach/hardware.h> diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h b/arch/arm/mach-lpc32xx/include/mach/hardware.h index 69065de97a3d..4866f096ffce 100644 --- a/arch/arm/mach-lpc32xx/include/mach/hardware.h +++ b/arch/arm/mach-lpc32xx/include/mach/hardware.h @@ -1,17 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-lpc32xx/include/mach/hardware.h * * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __ASM_ARCH_HARDWARE_H diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h index b5612a1d1839..1c53790444fc 100644 --- a/arch/arm/mach-lpc32xx/include/mach/platform.h +++ b/arch/arm/mach-lpc32xx/include/mach/platform.h @@ -1,19 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-lpc32xx/include/mach/platform.h * * Author: Kevin Wells <kevin.wells@nxp.com> * * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __ASM_ARCH_PLATFORM_H diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h index 1198a89183cd..a568812a0b91 100644 --- a/arch/arm/mach-lpc32xx/include/mach/uncompress.h +++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h @@ -1,19 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-lpc32xx/include/mach/uncompress.h * * Author: Kevin Wells <kevin.wells@nxp.com> * * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __ASM_ARM_ARCH_UNCOMPRESS_H diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index e48cc06c2aec..66701bf43248 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Platform support for LPC32xx SoC * @@ -5,113 +6,16 @@ * * Copyright (C) 2012 Roland Stigge <stigge@antcom.de> * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> #include <linux/amba/pl08x.h> -#include <linux/amba/mmci.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/clk.h> -#include <linux/mtd/lpc32xx_slc.h> #include <linux/mtd/lpc32xx_mlc.h> +#include <linux/mtd/lpc32xx_slc.h> +#include <linux/of_platform.h> -#include <asm/setup.h> -#include <asm/mach-types.h> #include <asm/mach/arch.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include <mach/board.h> #include "common.h" -/* - * AMBA LCD controller - */ -static struct clcd_panel conn_lcd_panel = { - .mode = { - .name = "QVGA portrait", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 191828, - .left_margin = 22, - .right_margin = 11, - .upper_margin = 2, - .lower_margin = 1, - .hsync_len = 5, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = (TIM2_IVS | TIM2_IHS), - .cntl = (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) | - CNTL_LCDBPP16_565), - .bpp = 16, -}; -#define PANEL_SIZE (3 * SZ_64K) - -static int lpc32xx_clcd_setup(struct clcd_fb *fb) -{ - dma_addr_t dma; - - fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, PANEL_SIZE, &dma, - GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; - } - - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = PANEL_SIZE; - fb->panel = &conn_lcd_panel; - - return 0; -} - -static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, - fb->fb.fix.smem_start, fb->fb.fix.smem_len); -} - -static void lpc32xx_clcd_remove(struct clcd_fb *fb) -{ - dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, - fb->fb.fix.smem_start); -} - -static struct clcd_board lpc32xx_clcd_data = { - .name = "Phytec LCD", - .check = clcdfb_check, - .decode = clcdfb_decode, - .setup = lpc32xx_clcd_setup, - .mmap = lpc32xx_clcd_mmap, - .remove = lpc32xx_clcd_remove, -}; - static struct pl08x_channel_data pl08x_slave_channels[] = { { .bus_id = "nand-slc", @@ -148,11 +52,6 @@ static struct pl08x_platform_data pl08x_pd = { .mem_buses = PL08X_AHB1, }; -static struct mmci_platform_data lpc32xx_mmci_data = { - .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | - MMC_VDD_32_33 | MMC_VDD_33_34, -}; - static struct lpc32xx_slc_platform_data lpc32xx_slc_data = { .dma_filter = pl08x_filter_id, }; @@ -162,12 +61,7 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = { }; static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL), - OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL), - OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data), OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd), - OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd", - &lpc32xx_mmci_data), OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash", &lpc32xx_slc_data), OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash", @@ -177,22 +71,8 @@ static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { static void __init lpc3250_machine_init(void) { - u32 tmp; - - /* Setup LCD muxing to RGB565 */ - tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) & - ~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK | - LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK); - tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16; - __raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL); - lpc32xx_serial_init(); - /* Test clock needed for UDA1380 initial init */ - __raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC | - LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN, - LPC32XX_CLKPWR_TEST_CLK_SEL); - of_platform_default_populate(NULL, lpc32xx_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c index 62471570d586..32bca351a73b 100644 --- a/arch/arm/mach-lpc32xx/pm.c +++ b/arch/arm/mach-lpc32xx/pm.c @@ -86,17 +86,10 @@ static int lpc32xx_pm_enter(suspend_state_t state) void *iram_swap_area; /* Allocate some space for temporary IRAM storage */ - iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL); - if (!iram_swap_area) { - printk(KERN_ERR - "PM Suspend: cannot allocate memory to save portion " - "of SRAM\n"); + iram_swap_area = kmemdup((void *)TEMP_IRAM_AREA, + lpc32xx_sys_suspend_sz, GFP_KERNEL); + if (!iram_swap_area) return -ENOMEM; - } - - /* Backup a small area of IRAM used for the suspend code */ - memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA, - lpc32xx_sys_suspend_sz); /* * Copy code to suspend system into IRAM. The suspend code diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 1931229a1eaa..3f9b30df9f0e 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -1,19 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-lpc32xx/serial.c * * Author: Kevin Wells <kevin.wells@nxp.com> * * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index 91cc461f7b04..9e0f592d87d8 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MEDIATEK bool "MediaTek SoC Support" depends on ARCH_MULTI_V7 @@ -26,6 +27,10 @@ config MACH_MT7623 bool "MediaTek MT7623 SoCs support" default ARCH_MEDIATEK +config MACH_MT7629 + bool "MediaTek MT7629 SoCs support" + default ARCH_MEDIATEK + config MACH_MT8127 bool "MediaTek MT8127 SoCs support" default ARCH_MEDIATEK diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile index dadae67d79b7..90e08a4222d6 100644 --- a/arch/arm/mach-mediatek/Makefile +++ b/arch/arm/mach-mediatek/Makefile @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SMP) += platsmp.o obj-y += mediatek.o diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index 6910b4e0d913..f6f102fa9e23 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -1,20 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Device Tree support for Mediatek SoCs * * Copyright (c) 2014 MundoReader S.L. * Author: Matthias Brugger <matthias.bgg@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/init.h> +#include <linux/io.h> #include <asm/mach/arch.h> #include <linux/of.h> #include <linux/clk-provider.h> @@ -30,7 +22,6 @@ static void __init mediatek_timer_init(void) if (of_machine_is_compatible("mediatek,mt6589") || of_machine_is_compatible("mediatek,mt7623") || - of_machine_is_compatible("mediatek,mt7623a") || of_machine_is_compatible("mediatek,mt8135") || of_machine_is_compatible("mediatek,mt8127")) { /* turn on GPT6 which ungates arch timer clocks */ @@ -50,7 +41,7 @@ static const char * const mediatek_board_dt_compat[] = { "mediatek,mt6589", "mediatek,mt6592", "mediatek,mt7623", - "mediatek,mt7623a", + "mediatek,mt7629", "mediatek,mt8127", "mediatek,mt8135", NULL, diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c index 6882ff07aaa6..16a4ee6c9590 100644 --- a/arch/arm/mach-mediatek/platsmp.c +++ b/arch/arm/mach-mediatek/platsmp.c @@ -1,19 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-mediatek/platsmp.c * * Copyright (c) 2014 Mediatek Inc. * Author: Shunli Wang <shunli.wang@mediatek.com> * Yingjoe Chen <yingjoe.chen@mediatek.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #include <linux/io.h> #include <linux/memblock.h> @@ -60,7 +51,7 @@ static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = { static const struct of_device_id mtk_smp_boot_infos[] __initconst = { { .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot }, { .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot }, - { .compatible = "mediatek,mt7623a", .data = &mtk_mt7623_boot }, + { .compatible = "mediatek,mt7629", .data = &mtk_mt7623_boot }, {}, }; diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index b16831697183..01f0f4b765e0 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MESON bool "Amlogic Meson SoCs" depends on ARCH_MULTI_V7 @@ -9,7 +10,6 @@ menuconfig ARCH_MESON select PINCTRL select PINCTRL_MESON select COMMON_CLK - select COMMON_CLK_AMLOGIC select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP diff --git a/arch/arm/mach-meson/Makefile b/arch/arm/mach-meson/Makefile index bc26c85a7e8f..49cfbaee4e00 100644 --- a/arch/arm/mach-meson/Makefile +++ b/arch/arm/mach-meson/Makefile @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_ARCH_MESON) += meson.o obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c index c8d99df32f9b..de56e707c7aa 100644 --- a/arch/arm/mach-meson/meson.c +++ b/arch/arm/mach-meson/meson.c @@ -1,16 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2014 Carlo Caione <carlo@caione.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * */ #include <linux/of_platform.h> diff --git a/arch/arm/mach-meson/platsmp.c b/arch/arm/mach-meson/platsmp.c index cad7ee8f0d6b..4b8ad728bb42 100644 --- a/arch/arm/mach-meson/platsmp.c +++ b/arch/arm/mach-meson/platsmp.c @@ -1,17 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015 Carlo Caione <carlo@endlessm.com> * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * */ #include <linux/delay.h> diff --git a/arch/arm/mach-milbeaut/Kconfig b/arch/arm/mach-milbeaut/Kconfig new file mode 100644 index 000000000000..6a576fd8521e --- /dev/null +++ b/arch/arm/mach-milbeaut/Kconfig @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +menuconfig ARCH_MILBEAUT + bool "Socionext Milbeaut SoCs" + depends on ARCH_MULTI_V7 + select ARM_GIC + help + This enables support for Socionext Milbeaut SoCs + +if ARCH_MILBEAUT + +config ARCH_MILBEAUT_M10V + bool "Milbeaut SC2000/M10V platform" + select ARM_ARCH_TIMER + select MILBEAUT_TIMER + select PINCTRL + select PINCTRL_MILBEAUT + help + Support for Socionext's MILBEAUT M10V based systems + +endif diff --git a/arch/arm/mach-milbeaut/Makefile b/arch/arm/mach-milbeaut/Makefile new file mode 100644 index 000000000000..a95d27473244 --- /dev/null +++ b/arch/arm/mach-milbeaut/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-milbeaut/platsmp.c b/arch/arm/mach-milbeaut/platsmp.c new file mode 100644 index 000000000000..3ea880f5fcb7 --- /dev/null +++ b/arch/arm/mach-milbeaut/platsmp.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright: (C) 2018 Socionext Inc. + * Copyright: (C) 2015 Linaro Ltd. + */ + +#include <linux/cpu_pm.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/of_address.h> +#include <linux/suspend.h> + +#include <asm/cacheflush.h> +#include <asm/cp15.h> +#include <asm/idmap.h> +#include <asm/smp_plat.h> +#include <asm/suspend.h> + +#define M10V_MAX_CPU 4 +#define KERNEL_UNBOOT_FLAG 0x12345678 + +static void __iomem *m10v_smp_base; + +static int m10v_boot_secondary(unsigned int l_cpu, struct task_struct *idle) +{ + unsigned int mpidr, cpu, cluster; + + if (!m10v_smp_base) + return -ENXIO; + + mpidr = cpu_logical_map(l_cpu); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + if (cpu >= M10V_MAX_CPU) + return -EINVAL; + + pr_info("%s: cpu %u l_cpu %u cluster %u\n", + __func__, cpu, l_cpu, cluster); + + writel(__pa_symbol(secondary_startup), m10v_smp_base + cpu * 4); + arch_send_wakeup_ipi_mask(cpumask_of(l_cpu)); + + return 0; +} + +static void m10v_smp_init(unsigned int max_cpus) +{ + unsigned int mpidr, cpu, cluster; + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "socionext,milbeaut-smp-sram"); + if (!np) + return; + + m10v_smp_base = of_iomap(np, 0); + if (!m10v_smp_base) + return; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_info("MCPM boot on cpu_%u cluster_%u\n", cpu, cluster); + + for (cpu = 0; cpu < M10V_MAX_CPU; cpu++) + writel(KERNEL_UNBOOT_FLAG, m10v_smp_base + cpu * 4); +} + +#ifdef CONFIG_HOTPLUG_CPU +static void m10v_cpu_die(unsigned int l_cpu) +{ + gic_cpu_if_down(0); + v7_exit_coherency_flush(louis); + wfi(); +} + +static int m10v_cpu_kill(unsigned int l_cpu) +{ + unsigned int mpidr, cpu; + + mpidr = cpu_logical_map(l_cpu); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + + writel(KERNEL_UNBOOT_FLAG, m10v_smp_base + cpu * 4); + + return 1; +} +#endif + +static struct smp_operations m10v_smp_ops __initdata = { + .smp_prepare_cpus = m10v_smp_init, + .smp_boot_secondary = m10v_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = m10v_cpu_die, + .cpu_kill = m10v_cpu_kill, +#endif +}; +CPU_METHOD_OF_DECLARE(m10v_smp, "socionext,milbeaut-m10v-smp", &m10v_smp_ops); + +static int m10v_pm_valid(suspend_state_t state) +{ + return (state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM); +} + +typedef void (*phys_reset_t)(unsigned long); +static phys_reset_t phys_reset; + +static int m10v_die(unsigned long arg) +{ + setup_mm_for_reboot(); + asm("wfi"); + /* Boot just like a secondary */ + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset(virt_to_phys(cpu_resume)); + + return 0; +} + +static int m10v_pm_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + asm("wfi"); + break; + case PM_SUSPEND_MEM: + cpu_pm_enter(); + cpu_suspend(0, m10v_die); + cpu_pm_exit(); + break; + } + return 0; +} + +static const struct platform_suspend_ops m10v_pm_ops = { + .valid = m10v_pm_valid, + .enter = m10v_pm_enter, +}; + +struct clk *m10v_clclk_register(struct device *cpu_dev); + +static int __init m10v_pm_init(void) +{ + if (of_machine_is_compatible("socionext,milbeaut-evb")) + suspend_set_ops(&m10v_pm_ops); + + return 0; +} +late_initcall(m10v_pm_init); diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 94500bed56ab..0440109e973b 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MMP bool "Marvell PXA168/910/MMP2" depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 diff --git a/arch/arm/mach-mmp/addr-map.h b/arch/arm/mach-mmp/addr-map.h index 2739d27bc89d..25edf6a92276 100644 --- a/arch/arm/mach-mmp/addr-map.h +++ b/arch/arm/mach-mmp/addr-map.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Common address map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_MACH_ADDR_MAP_H diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 75b2d7db643e..6314824b62fc 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/aspenite.c * * Support for the Marvell PXA168-based Aspenite and Zylonite2 * Development Platform. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/gpio-pxa.h> diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index 3d2aea830ef7..12e5a9441df9 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/avengers_lite.c * * Support for the Marvell PXA168-based Avengers lite Development Platform. * * Copyright (C) 2009-2010 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index a04e249c654b..ce93bc395546 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/brownstone.c * * Support for the Marvell Brownstone Development Platform. * * Copyright (C) 2009-2010 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/init.h> @@ -149,7 +146,6 @@ static struct regulator_init_data brownstone_v_5vp_data = { static struct fixed_voltage_config brownstone_v_5vp = { .supply_name = "v_5vp", .microvolts = 5000000, - .enable_high = 1, .enabled_at_boot = 1, .init_data = &brownstone_v_5vp_data, }; diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c index 28fe64c6e2f5..291fe41e3547 100644 --- a/arch/arm/mach-mmp/clock.c +++ b/arch/arm/mach-mmp/clock.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/clock.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h index 8194445183fe..0256c894fa11 100644 --- a/arch/arm/mach-mmp/clock.h +++ b/arch/arm/mach-mmp/clock.h @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +/* SPDX-License-Identifier: GPL-2.0-only */ #include <linux/clkdev.h> diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c index 685a0993cff6..6684abc7708b 100644 --- a/arch/arm/mach-mmp/common.c +++ b/arch/arm/mach-mmp/common.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/common.c * * Code common to PXA168 processor lines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index 822b8be042b9..130c1a603ba2 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/devices.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index 078b98034960..9a7054368e55 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/flint.c * * Support for the Marvell Flint Development Platform. * * Copyright (C) 2009 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index c224119dc0f4..5888b71944b8 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/gplugd.c * * Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 5dbb753a77ac..2578e176fd48 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/jasper.c * * Support for the Marvell Jasper Development Platform. * * Copyright (C) 2009-2010 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c index 6e155f03b83c..35559792d5cc 100644 --- a/arch/arm/mach-mmp/mmp-dt.c +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/mmp-dt.c * * Copyright (C) 2012 Marvell Technology Group Ltd. * Author: Haojian Zhuang <haojian.zhuang@marvell.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/irqchip.h> diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index e3ef1da26d5e..305a9daba6d6 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/mmp2-dt.c * * Copyright (C) 2012 Marvell Technology Group Ltd. * Author: Haojian Zhuang <haojian.zhuang@marvell.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/io.h> diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 726c1a642dea..18ea3e1a26e6 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/mmp2.c * * code name MMP2 * * Copyright (C) 2009 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/clk/mmp.h> #include <linux/module.h> diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c index 17699be3bc3d..2923dd5732a6 100644 --- a/arch/arm/mach-mmp/pm-mmp2.c +++ b/arch/arm/mach-mmp/pm-mmp2.c @@ -1,9 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * MMP2 Power Management Routines * - * This software program is licensed subject to the GNU General Public License - * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html - * * (C) Copyright 2012 Marvell International Ltd. * All Rights Reserved */ diff --git a/arch/arm/mach-mmp/pm-mmp2.h b/arch/arm/mach-mmp/pm-mmp2.h index 486e0590cd8d..70299a9450d3 100644 --- a/arch/arm/mach-mmp/pm-mmp2.h +++ b/arch/arm/mach-mmp/pm-mmp2.h @@ -1,9 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * MMP2 Power Management Routines * - * This software program is licensed subject to the GNU General Public License - * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html - * * (C) Copyright 2010 Marvell International Ltd. * All Rights Reserved */ diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c index 8b47600b3cdf..58535ce206dc 100644 --- a/arch/arm/mach-mmp/pm-pxa910.c +++ b/arch/arm/mach-mmp/pm-pxa910.c @@ -1,9 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * PXA910 Power Management Routines * - * This software program is licensed subject to the GNU General Public License - * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html - * * (C) Copyright 2009 Marvell International Ltd. * All Rights Reserved */ diff --git a/arch/arm/mach-mmp/pm-pxa910.h b/arch/arm/mach-mmp/pm-pxa910.h index 8cac8ab5253d..8e6344adaf51 100644 --- a/arch/arm/mach-mmp/pm-pxa910.h +++ b/arch/arm/mach-mmp/pm-pxa910.h @@ -1,9 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * PXA910 Power Management Routines * - * This software program is licensed subject to the GNU General Public License - * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html - * * (C) Copyright 2009 Marvell International Ltd. * All Rights Reserved */ diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index cdcf65ace3f9..6e0277488967 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/pxa168.c * * Code specific to PXA168 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index d30a7d12bc98..cba31c758dea 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/pxa910.c * * Code specific to PXA910 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/clk/mmp.h> #include <linux/module.h> diff --git a/arch/arm/mach-mmp/regs-apbc.h b/arch/arm/mach-mmp/regs-apbc.h index 704bcae3fc26..d0d00c2cce38 100644 --- a/arch/arm/mach-mmp/regs-apbc.h +++ b/arch/arm/mach-mmp/regs-apbc.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Application Peripheral Bus Clock Unit - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_MACH_REGS_APBC_H diff --git a/arch/arm/mach-mmp/regs-apmu.h b/arch/arm/mach-mmp/regs-apmu.h index 23f6209b65aa..e36f6503adfb 100644 --- a/arch/arm/mach-mmp/regs-apmu.h +++ b/arch/arm/mach-mmp/regs-apmu.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Application Subsystem Power Management Unit - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_MACH_REGS_APMU_H diff --git a/arch/arm/mach-mmp/regs-icu.h b/arch/arm/mach-mmp/regs-icu.h index 0328abe340a4..0375d5a7fcb2 100644 --- a/arch/arm/mach-mmp/regs-icu.h +++ b/arch/arm/mach-mmp/regs-icu.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Interrupt Control Unit - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_MACH_ICU_H diff --git a/arch/arm/mach-mmp/regs-timers.h b/arch/arm/mach-mmp/regs-timers.h index d3611c0becf0..a69f4d7e3443 100644 --- a/arch/arm/mach-mmp/regs-timers.h +++ b/arch/arm/mach-mmp/regs-timers.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Timers Module - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_MACH_REGS_TIMERS_H diff --git a/arch/arm/mach-mmp/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h index b047bf487506..d9f08c160154 100644 --- a/arch/arm/mach-mmp/regs-usb.h +++ b/arch/arm/mach-mmp/regs-usb.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2011 Marvell International Ltd. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #ifndef __ASM_ARCH_REGS_USB_H diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index ba91e4fe444d..6794e2db1ad5 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/sram.c * @@ -7,11 +8,6 @@ * All Rights Reserved * * Add for mmp sram support - Leo Yan <leoy@marvell.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/module.h> diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index efe35fadeb60..3261d2322198 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/tavorevb.c * * Support for the Marvell PXA910-based TavorEVB Development Platform. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/gpio-pxa.h> diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c index cf038eb3bb4b..7111535f325f 100644 --- a/arch/arm/mach-mmp/teton_bga.c +++ b/arch/arm/mach-mmp/teton_bga.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/teton_bga.c * @@ -6,10 +7,6 @@ * Author: Mark F. Brown <mark.brown314@gmail.com> * * This code is based on aspenite.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-mmp/teton_bga.h b/arch/arm/mach-mmp/teton_bga.h index 019730f5aa56..73050096f0bd 100644 --- a/arch/arm/mach-mmp/teton_bga.h +++ b/arch/arm/mach-mmp/teton_bga.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Support for the Marvell PXA168 Teton BGA Development Platform. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #ifndef __ASM_MACH_TETON_BGA_H #define __ASM_MACH_TETON_BGA_H diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index f9c295154b94..483df32583be 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/time.c * @@ -12,10 +13,6 @@ * The timers module actually includes three timers, each timer with up to * three match comparators. Timer #0 is used here in free-running mode as * the clock source, and match comparator #1 used as clock event device. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 09b53ace08ac..4f240760d4aa 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-mmp/ttc_dkb.c * * Support for the Marvell PXA910-based TTC_DKB Development Platform. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index a4a91f9a3301..31ada63ba51b 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MOXART bool "MOXA ART SoC" depends on ARCH_MULTI_V4 diff --git a/arch/arm/mach-moxart/Makefile b/arch/arm/mach-moxart/Makefile index fa022eb10ca1..ded3e38fb98d 100644 --- a/arch/arm/mach-moxart/Makefile +++ b/arch/arm/mach-moxart/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # Object file lists. obj-$(CONFIG_MACH_UC7112LX) += moxart.o diff --git a/arch/arm/mach-moxart/moxart.c b/arch/arm/mach-moxart/moxart.c index 86b6d9b57c54..f1f58c0c0fa1 100644 --- a/arch/arm/mach-moxart/moxart.c +++ b/arch/arm/mach-moxart/moxart.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-moxart/moxart.c * * (C) Copyright 2013, Jonas Jensen <jonas.jensen@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index d686a844a790..ea52c7fabb79 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MV78XX0 bool "Marvell MV78xx0" depends on ARCH_MULTI_V5 diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index f72e1e9f5fc5..dd762d1b083f 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/ata_platform.h> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 5d6fbadd7849..7a5629b9bede 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MVEBU bool "Marvell Engineering Business Unit (MVEBU) SoCs" depends on ARCH_MULTI_V7 || ARCH_MULTI_V5 diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 0b10acd7d1b9..d2df5ef9382b 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -136,7 +136,6 @@ static void __init i2c_quirk(void) of_update_property(np, new_compat); } - return; } static void __init mvebu_dt_init(void) diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index 8b2fbc8b6bc6..2d962fe48821 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -66,7 +66,7 @@ ENDPROC(ll_get_coherency_base) * fabric registers */ ENTRY(ll_get_coherency_cpumask) - mrc 15, 0, r3, cr0, cr0, 5 + mrc p15, 0, r3, cr0, cr0, 5 and r3, r3, #15 mov r2, #(1 << 24) lsl r3, r2, r3 diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c index 1e1f879f16ce..7c65ea2a87c0 100644 --- a/arch/arm/mach-mvebu/kirkwood-pm.c +++ b/arch/arm/mach-mvebu/kirkwood-pm.c @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Power Management driver for Marvell Kirkwood SoCs * * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, - * version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-mvebu/kirkwood-pm.h b/arch/arm/mach-mvebu/kirkwood-pm.h index 21e7530f368b..7ce7fac39a1c 100644 --- a/arch/arm/mach-mvebu/kirkwood-pm.h +++ b/arch/arm/mach-mvebu/kirkwood-pm.h @@ -1,17 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Power Management driver for Marvell Kirkwood SoCs * * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, - * version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __ARCH_KIRKWOOD_PM_H diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 0aa88105d46e..ceaad6d5927e 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -92,7 +92,8 @@ static void __init kirkwood_dt_eth_fixup(void) continue; /* skip disabled nodes or nodes with valid MAC address*/ - if (!of_device_is_available(pnp) || of_get_mac_address(np)) + if (!of_device_is_available(pnp) || + !IS_ERR(of_get_mac_address(np))) goto eth_fixup_skip; clk = of_clk_get(pnp, 0); @@ -107,8 +108,6 @@ static void __init kirkwood_dt_eth_fixup(void) clk_prepare_enable(clk); /* store MAC address register contents in local-mac-address */ - pr_err(FW_INFO "%pOF: local-mac-address is not set\n", np); - pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL); if (!pmac) goto eth_fixup_no_mem; diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c index db17121d7d63..070552511699 100644 --- a/arch/arm/mach-mvebu/pm-board.c +++ b/arch/arm/mach-mvebu/pm-board.c @@ -79,7 +79,7 @@ static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd) static int __init mvebu_armada_pm_init(void) { struct device_node *np; - struct device_node *gpio_ctrl_np; + struct device_node *gpio_ctrl_np = NULL; int ret = 0, i; if (!of_machine_is_compatible("marvell,axp-gp")) @@ -126,18 +126,23 @@ static int __init mvebu_armada_pm_init(void) goto out; } + if (gpio_ctrl_np) + of_node_put(gpio_ctrl_np); gpio_ctrl_np = args.np; pic_raw_gpios[i] = args.args[0]; } gpio_ctrl = of_iomap(gpio_ctrl_np, 0); - if (!gpio_ctrl) - return -ENOMEM; + if (!gpio_ctrl) { + ret = -ENOMEM; + goto out; + } mvebu_pm_suspend_init(mvebu_armada_pm_enter); out: of_node_put(np); + of_node_put(gpio_ctrl_np); return ret; } diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S index 88651221dbdd..7aae9a25cfeb 100644 --- a/arch/arm/mach-mvebu/pmsu_ll.S +++ b/arch/arm/mach-mvebu/pmsu_ll.S @@ -16,7 +16,7 @@ ENTRY(armada_38x_scu_power_up) mrc p15, 4, r1, c15, c0 @ get SCU base address orr r1, r1, #0x8 @ SCU CPU Power Status Register - mrc 15, 0, r0, cr0, cr0, 5 @ get the CPU ID + mrc p15, 0, r0, cr0, cr0, 5 @ get the CPU ID and r0, r0, #15 add r1, r1, r0 mov r0, #0x0 @@ -56,7 +56,6 @@ ENDPROC(armada_38x_cpu_resume) /* The following code will be executed from SRAM */ ENTRY(mvebu_boot_wa_start) -mvebu_boot_wa_start: ARM_BE8(setend be) adr r0, 1f ldr r0, [r0] @ load the address of the diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index cb429bc6dc0d..be1c1388055a 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only config SOC_IMX23 bool select ARM_AMBA diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index cc2bf6748ade..2bcd5e11b3bf 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_ARCH_MXS) += mach-mxs.o diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 1c6062d240c8..c109f47e9cbc 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -1,13 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2012 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <linux/clk.h> diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c index 6ae057c2cf9f..610eabbc78bf 100644 --- a/arch/arm/mach-mxs/pm.c +++ b/arch/arm/mach-mxs/pm.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-mxs/pm.h b/arch/arm/mach-mxs/pm.h index 09d77b00a96b..0894335e8cca 100644 --- a/arch/arm/mach-mxs/pm.h +++ b/arch/arm/mach-mxs/pm.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_MXS_PM_H diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig index 2da8e5dfcf24..1e5d9c870784 100644 --- a/arch/arm/mach-netx/Kconfig +++ b/arch/arm/mach-netx/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menu "NetX Implementations" depends on ARCH_NETX diff --git a/arch/arm/mach-netx/Makefile b/arch/arm/mach-netx/Makefile index 7ce4ba9eb242..44ea83f7d9c2 100644 --- a/arch/arm/mach-netx/Makefile +++ b/arch/arm/mach-netx/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel. # diff --git a/arch/arm/mach-netx/Makefile.boot b/arch/arm/mach-netx/Makefile.boot index 534a4d27055e..2eb23c0cb6b0 100644 --- a/arch/arm/mach-netx/Makefile.boot +++ b/arch/arm/mach-netx/Makefile.boot @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0x80008000 diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index 8814ee5e98fd..2dc80db07390 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-netx/fb.c * * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/device.h> diff --git a/arch/arm/mach-netx/fb.h b/arch/arm/mach-netx/fb.h index 4919cf33a5f3..5cdc01fc3c86 100644 --- a/arch/arm/mach-netx/fb.h +++ b/arch/arm/mach-netx/fb.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-netx/fb.h * * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ void netx_clcd_enable(struct clcd_fb *fb); diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index 842302df99c1..88881fd45e9f 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-netx/generic.c * * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/device.h> diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h index bb2ce471cc28..223e304574a5 100644 --- a/arch/arm/mach-netx/generic.h +++ b/arch/arm/mach-netx/generic.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-netx/generic.h * * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/reboot.h> diff --git a/arch/arm/mach-netx/include/mach/hardware.h b/arch/arm/mach-netx/include/mach/hardware.h index b661af2f2145..84253993d1e0 100644 --- a/arch/arm/mach-netx/include/mach/hardware.h +++ b/arch/arm/mach-netx/include/mach/hardware.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-netx/include/mach/hardware.h * * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H diff --git a/arch/arm/mach-netx/include/mach/irqs.h b/arch/arm/mach-netx/include/mach/irqs.h index 8f74a844a775..540c92104fe8 100644 --- a/arch/arm/mach-netx/include/mach/irqs.h +++ b/arch/arm/mach-netx/include/mach/irqs.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-netx/include/mach/irqs.h * * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #define NETX_IRQ_VIC_START 64 diff --git a/arch/arm/mach-netx/include/mach/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h index fdde22b58ac3..7c356a6ab80b 100644 --- a/arch/arm/mach-netx/include/mach/netx-regs.h +++ b/arch/arm/mach-netx/include/mach/netx-regs.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-netx/include/mach/netx-regs.h * * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_NETX_REGS_H diff --git a/arch/arm/mach-netx/include/mach/pfifo.h b/arch/arm/mach-netx/include/mach/pfifo.h index 42c59068f8d8..de23180bc937 100644 --- a/arch/arm/mach-netx/include/mach/pfifo.h +++ b/arch/arm/mach-netx/include/mach/pfifo.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-netx/include/mach/pfifo.h * * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h index 033875dbc32b..edc1ac997eab 100644 --- a/arch/arm/mach-netx/include/mach/uncompress.h +++ b/arch/arm/mach-netx/include/mach/uncompress.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-netx/include/mach/uncompress.h * * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* diff --git a/arch/arm/mach-netx/include/mach/xc.h b/arch/arm/mach-netx/include/mach/xc.h index 0c0011d4fc2d..465d5e250ab8 100644 --- a/arch/arm/mach-netx/include/mach/xc.h +++ b/arch/arm/mach-netx/include/mach/xc.h @@ -1,20 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-netx/include/mach/xc.h * * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_XC_H diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c index 9b558eb3070f..ad5e6747b834 100644 --- a/arch/arm/mach-netx/nxdb500.c +++ b/arch/arm/mach-netx/nxdb500.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-netx/nxdb500.c * * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/dma-mapping.h> diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c index a5e86cd365e7..917381559628 100644 --- a/arch/arm/mach-netx/nxdkn.c +++ b/arch/arm/mach-netx/nxdkn.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-netx/nxdkn.c * * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/dma-mapping.h> diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c index ad17885d0159..aa0d5b2ca712 100644 --- a/arch/arm/mach-netx/nxeb500hmi.c +++ b/arch/arm/mach-netx/nxeb500hmi.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-netx/nxeb500hmi.c * * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/dma-mapping.h> diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c index 03984943e16d..2e5cc777329f 100644 --- a/arch/arm/mach-netx/pfifo.c +++ b/arch/arm/mach-netx/pfifo.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-netx/pfifo.c * * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 054a8a61e379..d9defa1ab605 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-netx/time.c * * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c index f1c972d87bac..885a618b2651 100644 --- a/arch/arm/mach-netx/xc.c +++ b/arch/arm/mach-netx/xc.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-netx/xc.c * * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 3ae45b8d7b0a..e98429be2b18 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_NOMADIK bool "ST-Ericsson Nomadik" depends on ARCH_MULTI_V5 diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index 1071c3b04d1a..27ae20111b0b 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel. # diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 0c612d95bd5c..51f88a297c4e 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -1,19 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright STMicroelectronics, 2007. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig index 684c9c9a32bd..880bc2a5cada 100644 --- a/arch/arm/mach-npcm/Kconfig +++ b/arch/arm/mach-npcm/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_NPCM bool "Nuvoton NPCM Architecture" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile index f5f67201419f..1bc3a70bfab8 100644 --- a/arch/arm/mach-npcm/Makefile +++ b/arch/arm/mach-npcm/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only AFLAGS_headsmp.o += -march=armv7-a obj-$(CONFIG_ARCH_NPCM7XX) += npcm7xx.o diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig index d4985305cab2..b3d161e8e2fb 100644 --- a/arch/arm/mach-nspire/Kconfig +++ b/arch/arm/mach-nspire/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only config ARCH_NSPIRE bool "TI-NSPIRE based" depends on ARCH_MULTI_V4_V5 diff --git a/arch/arm/mach-nspire/Makefile b/arch/arm/mach-nspire/Makefile index 1bec256eba07..1d568c600452 100644 --- a/arch/arm/mach-nspire/Makefile +++ b/arch/arm/mach-nspire/Makefile @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-y += nspire.o obj-y += clcd.o diff --git a/arch/arm/mach-nspire/clcd.c b/arch/arm/mach-nspire/clcd.c index ea0e5b2ca1cd..44738dcb391d 100644 --- a/arch/arm/mach-nspire/clcd.c +++ b/arch/arm/mach-nspire/clcd.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-nspire/clcd.c * * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * */ #include <linux/init.h> diff --git a/arch/arm/mach-nspire/clcd.h b/arch/arm/mach-nspire/clcd.h index 8c33d2c18371..7f36bd8511c5 100644 --- a/arch/arm/mach-nspire/clcd.h +++ b/arch/arm/mach-nspire/clcd.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mach-nspire/clcd.h * * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * */ int nspire_clcd_setup(struct clcd_fb *fb); diff --git a/arch/arm/mach-nspire/mmio.h b/arch/arm/mach-nspire/mmio.h index 8813471af4cf..48e32f13f311 100644 --- a/arch/arm/mach-nspire/mmio.h +++ b/arch/arm/mach-nspire/mmio.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mach-nspire/mmio.h * * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * */ #define NSPIRE_MISC_PHYS_BASE 0x900A0000 diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c index 8584cdd1c827..957bd0c0fbd5 100644 --- a/arch/arm/mach-nspire/nspire.c +++ b/arch/arm/mach-nspire/nspire.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-nspire/nspire.c * * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * */ #include <linux/init.h> #include <linux/of_irq.h> diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index c4694f26b5c4..2a17dc1d122c 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only if ARCH_OMAP1 menu "TI OMAP1 specific features" diff --git a/arch/arm/mach-omap1/Makefile.boot b/arch/arm/mach-omap1/Makefile.boot index 13bda8dbd604..2c771515a606 100644 --- a/arch/arm/mach-omap1/Makefile.boot +++ b/arch/arm/mach-omap1/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0x10008000 params_phys-y := 0x10000100 initrd_phys-y := 0x10800000 diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 7c9fb7fe0070..81159af44862 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S * @@ -7,10 +8,6 @@ * Copyright (C) 2004 Pete Trapps * Copyright (C) 2006 Matt Callow * Copyright (C) 2010 Janusz Krzysztofik - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index 51212133ce06..0af2bf6f9933 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Amstrad E3 FIQ handling * @@ -8,10 +9,6 @@ * * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c * in the MontaVista 2.4 kernel (and the Amstrad changes therein) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. */ #include <linux/gpio/consumer.h> #include <linux/gpio/driver.h> diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index c4c0a8ea11e4..36498ea1b2f3 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-ams-delta.c * @@ -6,10 +7,6 @@ * Board specific inits for the Amstrad E3 (codename Delta) videophone * * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio/driver.h> #include <linux/gpio/machine.h> @@ -182,6 +179,7 @@ static struct resource latch1_resources[] = { static struct bgpio_pdata latch1_pdata = { .label = LATCH1_LABEL, + .base = -1, .ngpio = LATCH1_NGPIO, }; @@ -219,6 +217,7 @@ static struct resource latch2_resources[] = { static struct bgpio_pdata latch2_pdata = { .label = LATCH2_LABEL, + .base = -1, .ngpio = LATCH2_NGPIO, }; @@ -267,7 +266,6 @@ static struct fixed_voltage_config modem_nreset_config = { .supply_name = "modem_nreset", .microvolts = 3300000, .startup_delay = 25000, - .enable_high = 1, .enabled_at_boot = 1, .init_data = &modem_nreset_data, }; @@ -533,7 +531,6 @@ static struct regulator_init_data keybrd_pwr_initdata = { static struct fixed_voltage_config keybrd_pwr_config = { .supply_name = "keybrd_pwr", .microvolts = 5000000, - .enable_high = 1, .init_data = &keybrd_pwr_initdata, }; @@ -749,7 +746,7 @@ static void __init ams_delta_init(void) ARRAY_SIZE(ams_delta_gpio_tables)); leds_pdev = gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata); - if (!IS_ERR(leds_pdev)) { + if (!IS_ERR_OR_NULL(leds_pdev)) { leds_gpio_table.dev_id = dev_name(&leds_pdev->dev); gpiod_add_lookup_table(&leds_gpio_table); } diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 4a0a66815ca0..c3aa6f2e5546 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-fsample.c * @@ -5,10 +6,6 @@ * * Original OMAP730 support by Jean Pihet <j-pihet@ti.com> * Updated for 2.6 by Kevin Hilman <kjh@hilman.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 9708629f8c5f..c62554990115 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-generic.c * @@ -7,10 +8,6 @@ * the device drivers take care of all the necessary hardware initialization. * Do not put any board specific code to this file; create a new machine * type if you need custom low-level initializations. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 91bda9c802ff..06c5404078aa 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-h2-mmc.c * @@ -6,10 +7,6 @@ * * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is: * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 9d9a6ca15df0..cb7ce627ffe8 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-h2.c * @@ -13,10 +14,6 @@ * * H2 specific changes and cleanup * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 692c267a9a90..f595bd4f5024 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-h3-mmc.c * @@ -6,10 +7,6 @@ * * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is: * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index cd6e02c5c01a..4249984f9c30 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-h3.c * @@ -8,10 +9,6 @@ * Copyright (C) 2001 RidgeRun, Inc. * Author: RidgeRun, Inc. * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/types.h> diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 5733212759d3..258304edf23e 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * HTC Herald board configuration * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com> @@ -6,22 +7,6 @@ * Based on the board-htcwizard.c file from the linwizard project: * Copyright (C) 2006 Unai Uribarri * Copyright (C) 2008 linwizard.sourceforge.net - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 8c286a29f24b..cbe093f969d5 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-innovator.c * @@ -10,10 +11,6 @@ * * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c index 20923eb2d9b6..479ab9be784d 100644 --- a/arch/arm/mach-omap1/board-nand.c +++ b/arch/arm/mach-omap1/board-nand.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-nand.c * @@ -8,10 +9,6 @@ * Copyright (C) 2001 RidgeRun, Inc. * Author: RidgeRun, Inc. * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/io.h> diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index eb41db78cd47..11511ae2e0a2 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -1,15 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-nokia770.c * * Modified from board-generic.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/clkdev.h> #include <linux/irq.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mutex.h> @@ -25,7 +23,6 @@ #include <linux/platform_data/keypad-omap.h> #include <linux/platform_data/lcd-mipid.h> #include <linux/platform_data/gpio-omap.h> -#include <linux/platform_data/i2c-cbus-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -217,18 +214,19 @@ static inline void nokia770_mmc_init(void) #endif #if IS_ENABLED(CONFIG_I2C_CBUS_GPIO) -static struct i2c_cbus_platform_data nokia770_cbus_data = { - .clk_gpio = OMAP_MPUIO(9), - .dat_gpio = OMAP_MPUIO(10), - .sel_gpio = OMAP_MPUIO(11), +static struct gpiod_lookup_table nokia770_cbus_gpio_table = { + .dev_id = "i2c-cbus-gpio.2", + .table = { + GPIO_LOOKUP_IDX("mpuio", 9, NULL, 0, 0), /* clk */ + GPIO_LOOKUP_IDX("mpuio", 10, NULL, 1, 0), /* dat */ + GPIO_LOOKUP_IDX("mpuio", 11, NULL, 2, 0), /* sel */ + { }, + }, }; static struct platform_device nokia770_cbus_device = { .name = "i2c-cbus-gpio", .id = 2, - .dev = { - .platform_data = &nokia770_cbus_data, - }, }; static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { @@ -257,6 +255,7 @@ static void __init nokia770_cbus_init(void) nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio); i2c_register_board_info(2, nokia770_i2c_board_info_2, ARRAY_SIZE(nokia770_i2c_board_info_2)); + gpiod_add_lookup_table(&nokia770_cbus_gpio_table); platform_device_register(&nokia770_cbus_device); } #else /* CONFIG_I2C_CBUS_GPIO */ diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index d4d8a32e57eb..ce6f0fcd9d12 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-palmte.c * @@ -11,10 +12,6 @@ * palmtelinux-developpers@lists.sf.net * * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index a23327682df0..8a08311c4e05 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-palmtt.c * @@ -5,10 +6,6 @@ * * Modified and amended for Palm Tungsten|T * by Marek Vasut <marek.vasut@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/delay.h> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 30b07096197b..034e5bc6a029 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-palmz71.c * @@ -8,10 +9,6 @@ * Original version : Laurent Gonzalez * * Modified for zire71 : Marek Vasut - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/delay.h> diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 06a584fef5b8..1aeeb7337d29 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-perseus2.c * @@ -5,10 +6,6 @@ * * Original OMAP730 support by Jean Pihet <j-pihet@ti.com> * Updated for 2.6 by Kevin Hilman <kjh@hilman.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 79f0af8bfae0..6192b1da75cb 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-sx1-mmc.c * @@ -6,10 +7,6 @@ * * This code is based on linux/arch/arm/mach-omap1/board-h2-mmc.c, which is: * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index ec27bb3e370f..bb9ec345e204 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/board-sx1.c * @@ -9,10 +10,6 @@ * * Maintainters : Vladimir Ananiev (aka Vovan888), Sergge * oslik.ru -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index c8c6fe88b2d6..406fd2a9a88f 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/clock.c * @@ -6,10 +7,6 @@ * * Modified to use omap shared clock framework by * Tony Lindgren <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/export.h> diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index f2d1be211723..f3b8811f5ac0 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mach-omap1/clock.h * * Copyright (C) 2004 - 2005, 2009 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 6c4f766365a2..3ebcd96efbff 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/clock_data.c * @@ -5,10 +6,6 @@ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * To do: * - Clocks that are only available on some chips should be marked with the * chips that they are present on. diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index e1243b5d554f..3c4900ac72fc 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * linux/arch/arm/mach-omap1/devices.c * * OMAP1 platform device setup/initialization - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/dma-mapping.h> diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 52d7eda1adec..0ad8bdc2ed61 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP1/OMAP7xx - specific DMA driver * @@ -12,10 +13,6 @@ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ * Converted DMA library into platform driver * - G, Manjunath Kondaiah <manjugk@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/err.h> diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c index ddab04087b7a..0e32a959f254 100644 --- a/arch/arm/mach-omap1/fb.c +++ b/arch/arm/mach-omap1/fb.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * File: arch/arm/plat-omap/fb.c * @@ -5,20 +6,6 @@ * * Copyright (C) 2006 Nokia Corporation * Author: Imre Deak <imre.deak@nokia.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include <linux/module.h> diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index 99cda402e1e2..40e43ce5329f 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Flash support for OMAP1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/io.h> diff --git a/arch/arm/mach-omap1/flash.h b/arch/arm/mach-omap1/flash.h index 0d88499b79e9..7077224f65bd 100644 --- a/arch/arm/mach-omap1/flash.h +++ b/arch/arm/mach-omap1/flash.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Flash support for OMAP1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __OMAP_FLASH_H diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 39e20d0ead08..f03ed523f20f 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/fpga.c * @@ -10,10 +11,6 @@ * * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/types.h> diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h index 4b4307a80e48..7e7450edacc1 100644 --- a/arch/arm/mach-omap1/fpga.h +++ b/arch/arm/mach-omap1/fpga.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Interrupt handler for OMAP-1510 FPGA * @@ -8,10 +9,6 @@ * * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_OMAP_FPGA_H diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index 9250f263ac51..5e6d81b1624c 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -1,22 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Helper module for board specific I2C bus registration * * Copyright (C) 2009 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * */ #include <linux/i2c.h> diff --git a/arch/arm/mach-omap1/i2c.h b/arch/arm/mach-omap1/i2c.h index 54a2bce7879e..03e2ac2efe50 100644 --- a/arch/arm/mach-omap1/i2c.h +++ b/arch/arm/mach-omap1/i2c.h @@ -1,22 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Helper module for board specific I2C bus registration * * Copyright (C) 2009 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * */ #ifndef __ARCH_ARM_MACH_OMAP1_I2C_H diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index 7e49dfda3d2f..91556e374152 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/id.c * @@ -5,10 +6,6 @@ * * Copyright (C) 2004 Nokia Corporation * Written by Tony Lindgren <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index 5875a5098d35..e7c8ac7d83e3 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -36,7 +36,7 @@ #ifndef __ASM_ARCH_OMAP_HARDWARE_H #define __ASM_ARCH_OMAP_HARDWARE_H -#include <asm/sizes.h> +#include <linux/sizes.h> #ifndef __ASSEMBLER__ #include <asm/types.h> #include <mach/soc.h> diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h index 9050085271bc..30bf007700cf 100644 --- a/arch/arm/mach-omap1/include/mach/irqs.h +++ b/arch/arm/mach-omap1/include/mach/irqs.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/plat-omap/include/mach/irqs.h * @@ -7,20 +8,6 @@ * Copyright (C) 2009 Texas Instruments * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 * are different. */ diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h index d7a457bbcb7f..1a3c0cf17899 100644 --- a/arch/arm/mach-omap1/include/mach/lcd_dma.h +++ b/arch/arm/mach-omap1/include/mach/lcd_dma.h @@ -1,23 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-omap1/include/mach/lcd_dma.h * * Extracted from arch/arm/plat-omap/include/plat/dma.h * Copyright (C) 2003 Nokia Corporation * Author: Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __MACH_OMAP1_LCD_DMA_H__ #define __MACH_OMAP1_LCD_DMA_H__ diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h index 89bd703adaf6..7152db1f5361 100644 --- a/arch/arm/mach-omap1/include/mach/lcdc.h +++ b/arch/arm/mach-omap1/include/mach/lcdc.h @@ -1,23 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-omap1/include/mach/lcdc.h * * Extracted from drivers/video/omap/lcdc.c * Copyright (C) 2004 Nokia Corporation * Author: Imre Deak <imre.deak@nokia.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef __MACH_LCDC_H__ #define __MACH_LCDC_H__ diff --git a/arch/arm/mach-omap1/include/mach/mux.h b/arch/arm/mach-omap1/include/mach/mux.h index 323948959200..adfe1f6bd0c5 100644 --- a/arch/arm/mach-omap1/include/mach/mux.h +++ b/arch/arm/mach-omap1/include/mach/mux.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/plat-omap/include/mach/mux.h * @@ -9,20 +10,6 @@ * * Written by Tony Lindgren * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * NOTE: Please use the following naming style for new pin entries. * For example, W8_1610_MMC2_DAT0, where: * - W8 = ball diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h index 3d935570eb3b..1897cbabfc93 100644 --- a/arch/arm/mach-omap1/include/mach/soc.h +++ b/arch/arm/mach-omap1/include/mach/soc.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * OMAP cpu type detection * @@ -8,21 +9,6 @@ * Written by Tony Lindgren <tony.lindgren@nokia.com> * * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef __ASM_ARCH_OMAP_CPU_H diff --git a/arch/arm/mach-omap1/include/mach/tc.h b/arch/arm/mach-omap1/include/mach/tc.h index 1b4b2da86203..adaab6a0bd08 100644 --- a/arch/arm/mach-omap1/include/mach/tc.h +++ b/arch/arm/mach-omap1/include/mach/tc.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/plat-omap/include/mach/tc.h * @@ -5,20 +6,6 @@ * * Copyright (C) 2004 Nokia Corporation * Author: Imre Deak <imre.deak@nokia.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef __ASM_ARCH_TC_H diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 499b8accb83d..5a173fc2a1ca 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/io.c * * OMAP1 I/O mapping code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 26a2b01c7c4f..a72ac0c02b4f 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/lcd_dma.c * @@ -15,11 +16,6 @@ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> * * Support functions for the OMAP internal DMA channels. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/module.h> diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 27e22e702f96..f36c34f47f11 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/mcbsp.c * * Copyright (C) 2008 Instituto Nokia de Tecnologia * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Multichannel mode not supported. */ #include <linux/ioport.h> diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 599490a596a7..972665bf52d6 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * linux/arch/arm/mach-omap1/mux.c * @@ -6,21 +7,6 @@ * Copyright (C) 2003 - 2008 Nokia Corporation * * Written by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/module.h> #include <linux/init.h> diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c index 44a3d19eb481..380ea2de58c1 100644 --- a/arch/arm/mach-omap1/ocpi.c +++ b/arch/arm/mach-omap1/ocpi.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * linux/arch/arm/plat-omap/ocpi.c * @@ -8,20 +9,6 @@ * Written by Tony Lindgren <tony@atomide.com> * * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/module.h> diff --git a/arch/arm/mach-omap1/opp.h b/arch/arm/mach-omap1/opp.h index 79a683864a5c..5b8b9c8edfe3 100644 --- a/arch/arm/mach-omap1/opp.h +++ b/arch/arm/mach-omap1/opp.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mach-omap1/opp.h * * Copyright (C) 2004 - 2005 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP1_OPP_H diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c index 8dcebe6d8882..a27ca7dc03a2 100644 --- a/arch/arm/mach-omap1/opp_data.c +++ b/arch/arm/mach-omap1/opp_data.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/opp_data.c * * Copyright (C) 2004 - 2005 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "clock.h" diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index a65bd0c44296..9eb591fbfd89 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap1/serial.c * * OMAP1 serial support. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/module.h> diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c index 6431b0f862ce..3bd60708c345 100644 --- a/arch/arm/mach-omap1/sram-init.c +++ b/arch/arm/mach-omap1/sram-init.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP SRAM detection and management * * Copyright (C) 2005 Nokia Corporation * Written by Tony Lindgren <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S index 00e9d9e9adf1..37f34fcd65fb 100644 --- a/arch/arm/mach-omap1/sram.S +++ b/arch/arm/mach-omap1/sram.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/plat-omap/sram-fn.S * * Functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 455e2cf2866d..d8e9bbda8f7b 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -1,21 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Platform level USB initialization for FS USB OTG controller on omap1 * * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/module.h> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5e33d1a90664..fdb6743760a2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menu "TI OMAP/AM/DM/DRA Family" depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 diff --git a/arch/arm/mach-omap2/am33xx-restart.c b/arch/arm/mach-omap2/am33xx-restart.c index 5bace6a45ffb..ef2f18a56b65 100644 --- a/arch/arm/mach-omap2/am33xx-restart.c +++ b/arch/arm/mach-omap2/am33xx-restart.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * am33xx-restart.c - Code common to all AM33xx machines. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/reboot.h> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 6b4f4975cf7a..ff992f8895ee 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2005 Nokia Corporation * Author: Paul Mundt <paul.mundt@nokia.com> @@ -6,10 +7,6 @@ * * Modified from the original mach-omap/omap2/board-generic.c did by Paul * to support the OMAP2+ device tree boards with an unique board file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/io.h> #include <linux/of_irq.h> diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 75bc18646df6..418a61ecb827 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap2/board-n8x0.c * @@ -5,10 +6,6 @@ * Author: Juha Yrjola <juha.yrjola@nokia.com> * * Modified from mach-omap2/board-generic.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/clk.h> diff --git a/arch/arm/mach-omap2/clkt2xxx_dpll.c b/arch/arm/mach-omap2/clkt2xxx_dpll.c index 82572e277b97..0edebf3355fa 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpll.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpll.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2-specific DPLL control functions * * Copyright (C) 2011 Nokia Corporation * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index e8d417309f33..8a9983cb4733 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * DPLL + CORE_CLK composite clock functions * @@ -11,10 +12,6 @@ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, * Gordon McNutt and RidgeRun, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * XXX The DPLL and CORE clocks should be split into two separate clock * types. */ diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index b64d717bfab6..2a3e72286d3a 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2xxx DVFS virtual clock functions * @@ -11,10 +12,6 @@ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, * Gordon McNutt and RidgeRun, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * XXX Some of this code should be replaceable by the upcoming OPP layer * code. However, some notion of "rate set" is probably still necessary * for OMAP2xxx at least. Rate sets should be generalized so they can be diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 42881f21cede..3c1d12dc8ff3 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap2/clock.c * @@ -7,10 +8,6 @@ * Contacts: * Richard Woodruff <r-woodruff2@ti.com> * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #undef DEBUG @@ -119,6 +116,9 @@ void __init ti_clk_init_features(void) if (cpu_is_omap343x()) features.flags |= TI_CLK_DPLL_HAS_FREQSEL; + if (omap_type() == OMAP2_DEVICE_TYPE_GP) + features.flags |= TI_CLK_DEVICE_TYPE_GP; + /* Idlest value for interface clocks. * 24xx uses 0 to indicate not ready, and 1 to indicate ready. * 34xx reverses this, just to keep us on our toes diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index cf45550197e6..bbe4b32891bb 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mach-omap2/clock.h * @@ -7,10 +8,6 @@ * Contacts: * Richard Woodruff <r-woodruff2@ti.com> * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 6d44fe05a3fe..f98c8ecc9ca2 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2/3/4 clockdomain framework functions * @@ -6,10 +7,6 @@ * * Written by Paul Walmsley and Jouni Högander * Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #undef DEBUG diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index c7d0953e4aa2..68550b23c938 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2/3 clockdomain framework functions * @@ -5,10 +6,6 @@ * Copyright (C) 2008-2011 Nokia Corporation * * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAIN_H diff --git a/arch/arm/mach-omap2/clockdomains43xx_data.c b/arch/arm/mach-omap2/clockdomains43xx_data.c index 6d71c6082a24..751708d727af 100644 --- a/arch/arm/mach-omap2/clockdomains43xx_data.c +++ b/arch/arm/mach-omap2/clockdomains43xx_data.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * AM43xx Clock domains framework * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 95192a062d5d..6005c4ed3bc6 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP4 Clock domains framework * @@ -13,10 +14,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/clockdomains54xx_data.c b/arch/arm/mach-omap2/clockdomains54xx_data.c index 1a3c69d2e14c..3ab41fc89dd3 100644 --- a/arch/arm/mach-omap2/clockdomains54xx_data.c +++ b/arch/arm/mach-omap2/clockdomains54xx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP54XX Clock domains framework * @@ -12,10 +13,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c index 67ebff829cf2..3068802824b7 100644 --- a/arch/arm/mach-omap2/clockdomains7xx_data.c +++ b/arch/arm/mach-omap2/clockdomains7xx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * DRA7xx Clock domains framework * @@ -14,10 +15,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h index 9ff0fc70f152..59c14dbb6f87 100644 --- a/arch/arm/mach-omap2/cm-regbits-24xx.h +++ b/arch/arm/mach-omap2/cm-regbits-24xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H #define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H @@ -8,10 +9,6 @@ * Copyright (C) 2007 Nokia Corporation * * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define OMAP24XX_AUTOSTATE_MPU_MASK (1 << 0) diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 38656ce2432c..037529a9e969 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_34XX_H #define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_34XX_H @@ -8,10 +9,6 @@ * Copyright (C) 2007-2008 Nokia Corporation * * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0) diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h index 4dbbd99b6e1e..1e9c23c107b2 100644 --- a/arch/arm/mach-omap2/cm-regbits-44xx.h +++ b/arch/arm/mach-omap2/cm-regbits-44xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP44xx Clock Management register bits * @@ -13,10 +14,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H diff --git a/arch/arm/mach-omap2/cm-regbits-54xx.h b/arch/arm/mach-omap2/cm-regbits-54xx.h index 896ae9fc4cfb..44663b575bf4 100644 --- a/arch/arm/mach-omap2/cm-regbits-54xx.h +++ b/arch/arm/mach-omap2/cm-regbits-54xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP54xx Clock Management register bits * @@ -12,10 +13,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_54XX_H diff --git a/arch/arm/mach-omap2/cm-regbits-7xx.h b/arch/arm/mach-omap2/cm-regbits-7xx.h index ad8f81ce9b16..a78ccbaab1a6 100644 --- a/arch/arm/mach-omap2/cm-regbits-7xx.h +++ b/arch/arm/mach-omap2/cm-regbits-7xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * DRA7xx Clock Management register bits * @@ -13,10 +14,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_7XX_H diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index b19e83d53501..d02fe63dab59 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2+ Clock Management prototypes * @@ -5,10 +6,6 @@ * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ASM_MACH_OMAP2_CM_H #define __ARCH_ASM_MACH_OMAP2_CM_H diff --git a/arch/arm/mach-omap2/cm1_44xx.h b/arch/arm/mach-omap2/cm1_44xx.h index a5949927b661..1a9725c7ad30 100644 --- a/arch/arm/mach-omap2/cm1_44xx.h +++ b/arch/arm/mach-omap2/cm1_44xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP44xx CM1 instance offset macros * @@ -14,10 +15,6 @@ * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX", * or "OMAP4430". */ diff --git a/arch/arm/mach-omap2/cm1_54xx.h b/arch/arm/mach-omap2/cm1_54xx.h index fd245dfa7391..7be363a27a40 100644 --- a/arch/arm/mach-omap2/cm1_54xx.h +++ b/arch/arm/mach-omap2/cm1_54xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP54xx CM1 instance offset macros * @@ -12,11 +13,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __ARCH_ARM_MACH_OMAP2_CM1_54XX_H diff --git a/arch/arm/mach-omap2/cm1_7xx.h b/arch/arm/mach-omap2/cm1_7xx.h index 2f1c09eea021..28660edc7f5f 100644 --- a/arch/arm/mach-omap2/cm1_7xx.h +++ b/arch/arm/mach-omap2/cm1_7xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * DRA7xx CM1 instance offset macros * @@ -13,11 +14,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __ARCH_ARM_MACH_OMAP2_CM1_7XX_H diff --git a/arch/arm/mach-omap2/cm2_44xx.h b/arch/arm/mach-omap2/cm2_44xx.h index 7521abf3d830..370d295446b6 100644 --- a/arch/arm/mach-omap2/cm2_44xx.h +++ b/arch/arm/mach-omap2/cm2_44xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP44xx CM2 instance offset macros * @@ -14,10 +15,6 @@ * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX", * or "OMAP4430". */ diff --git a/arch/arm/mach-omap2/cm2_54xx.h b/arch/arm/mach-omap2/cm2_54xx.h index ff4040c196d8..c5da1f5cae93 100644 --- a/arch/arm/mach-omap2/cm2_54xx.h +++ b/arch/arm/mach-omap2/cm2_54xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP54xx CM2 instance offset macros * @@ -12,10 +13,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_CM2_54XX_H diff --git a/arch/arm/mach-omap2/cm2_7xx.h b/arch/arm/mach-omap2/cm2_7xx.h index ce63fdb68056..e16fc58ef152 100644 --- a/arch/arm/mach-omap2/cm2_7xx.h +++ b/arch/arm/mach-omap2/cm2_7xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * DRA7xx CM2 instance offset macros * @@ -13,10 +14,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_CM2_7XX_H diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index d5b87f42a96e..0827acb60584 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2xxx CM module functions * @@ -5,10 +6,6 @@ * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc. * Paul Walmsley * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h index 7b8c79c0ce27..004016d7459e 100644 --- a/arch/arm/mach-omap2/cm2xxx.h +++ b/arch/arm/mach-omap2/cm2xxx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2xxx Clock Management (CM) register definitions * @@ -5,10 +6,6 @@ * Copyright (C) 2007-2010 Nokia Corporation * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * The CM hardware modules on the OMAP2/3 are quite similar to each * other. The CM modules/instances on OMAP4 are quite different, so * they are handled in a separate file. diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h index aa148cd57cc1..70944b94cc09 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2/3 Clock Management (CM) register definitions * @@ -5,10 +6,6 @@ * Copyright (C) 2007-2010 Nokia Corporation * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * The CM hardware modules on the OMAP2/3 are quite similar to each * other. The CM modules/instances on OMAP4 are quite different, so * they are handled in a separate file. diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index ec580fd094a6..b03b6123b8fc 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP3xxx CM module functions * @@ -5,10 +6,6 @@ * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc. * Paul Walmsley * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h index bc444e2080a1..ab0dc206d0c4 100644 --- a/arch/arm/mach-omap2/cm3xxx.h +++ b/arch/arm/mach-omap2/cm3xxx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2/3 Clock Management (CM) register definitions * @@ -5,10 +6,6 @@ * Copyright (C) 2007-2010 Nokia Corporation * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * The CM hardware modules on the OMAP2/3 are quite similar to each * other. The CM modules/instances on OMAP4 are quite different, so * they are handled in a separate file. diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h index 309a4c913448..826fdda54b3f 100644 --- a/arch/arm/mach-omap2/cm44xx.h +++ b/arch/arm/mach-omap2/cm44xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP4 Clock Management (CM) definitions * @@ -6,10 +7,6 @@ * * Written by Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * OMAP4 has two separate CM blocks, CM1 and CM2. This file contains * macros and function prototypes that are applicable to both. */ diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index aff747ecad51..b7ea609386d5 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2+ common Clock Management (CM) IP block functions * * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * XXX This code should eventually be moved to a CM driver. */ diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index c11ac492b626..46670521b278 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP4 CM instance functions * @@ -6,10 +7,6 @@ * Paul Walmsley * Rajendra Nayak <rnayak@ti.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This is needed since CM instances can be in the PRM, PRCM_MPU, CM1, * or CM2 hardware modules. For example, the EMU_CM CM instance is in * the PRM hardware module. What a mess... diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 484cdadfb187..a4af202cbc25 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap2/common.c * @@ -7,10 +8,6 @@ * Copyright (C) 2010 Nokia Corporation * Tony Lindgren <tony@atomide.com> * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 129455e822e4..6316da3623b3 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -336,6 +336,15 @@ static inline void omap5_secondary_hyp_startup(void) } #endif +#ifdef CONFIG_SOC_DRA7XX +extern int dra7xx_pciess_reset(struct omap_hwmod *oh); +#else +static inline int dra7xx_pciess_reset(struct omap_hwmod *oh) +{ + return 0; +} +#endif + void pdata_quirks_init(const struct of_device_id *); void omap_auxdata_legacy_init(struct device *dev); void omap_pcs_legacy_init(int irq, void (*rearm)(void)); diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 0bbfb20e193f..c84b5e260617 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2/3 System Control Module register access * @@ -5,10 +6,6 @@ * Copyright (C) 2007 Nokia Corporation * * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #undef DEBUG diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 2a3db0bd9e15..532a3e4b98c6 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap2/cpuidle34xx.c * @@ -16,10 +17,6 @@ * Richard Woodruff <r-woodruff2@ti.com> * * Based on pm.c for omap2 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/sched.h> diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index dae514c8276a..fe75d4fa6073 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP4+ CPU idle Routines * * Copyright (C) 2011-2013 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/sched.h> diff --git a/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h b/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h index a0af9baec3f7..414f14d1e0a0 100644 --- a/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h +++ b/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP44xx CTRL_MODULE_WKUP registers and bitfields * @@ -11,10 +12,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index ed6f074ea672..cc0d08dad141 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * linux/arch/arm/mach-omap2/devices.c * * OMAP2 platform device setup/initialization - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 1444b4b4bd9f..439e143cad7b 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -250,8 +250,10 @@ static int __init omapdss_init_of(void) if (!node) return 0; - if (!of_device_is_available(node)) + if (!of_device_is_available(node)) { + of_node_put(node); return 0; + } pdev = of_find_device_by_node(node); diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h index 42ec2e99a2f4..22ffca68f702 100644 --- a/arch/arm/mach-omap2/display.h +++ b/arch/arm/mach-omap2/display.h @@ -1,19 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * display.h - OMAP2+ integration-specific DSS header * * Copyright (C) 2011 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index a005e2a23b86..0c105baa5e88 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2+ DMA driver * @@ -15,10 +16,6 @@ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ * Converted DMA library into platform driver * - G, Manjunath Kondaiah <manjugk@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/err.h> diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c index ecd00b63181e..0f8c8efe3ae8 100644 --- a/arch/arm/mach-omap2/fb.c +++ b/arch/arm/mach-omap2/fb.c @@ -1,22 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Framebuffer device registration for TI OMAP platforms * * Copyright (C) 2006 Nokia Corporation * Author: Imre Deak <imre.deak@nokia.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include <linux/module.h> diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h index 9caa41a6cb04..e060f1b5c27d 100644 --- a/arch/arm/mach-omap2/gpmc.h +++ b/arch/arm/mach-omap2/gpmc.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * General-Purpose Memory Controller for OMAP2 * * Copyright (C) 2005-2006 Nokia Corporation * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Do not include this file in any new code, this will get removed * once omap3 boots in device tree only mode. - * */ #include <linux/omap-gpmc.h> diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index 2bc4db23ca56..c0127f2c558b 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * IP block integration code for the HDQ1W/1-wire IP block * @@ -6,20 +7,6 @@ * * Based on the I2C reset code in arch/arm/mach-omap2/i2c.c by * Avinash.H.M <avinashhm@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/hdq1w.h b/arch/arm/mach-omap2/hdq1w.h index c7e08d2a7a46..2e2f1e88af64 100644 --- a/arch/arm/mach-omap2/hdq1w.h +++ b/arch/arm/mach-omap2/hdq1w.h @@ -1,22 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Shared macros and function prototypes for the HDQ1W/1-wire IP block * * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA */ #ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H #define ARCH_ARM_MACH_OMAP2_HDQ1W_H diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index af545193f673..14b9c13c1fa0 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap2/hsmmc.c * * Copyright (C) 2007-2008 Texas Instruments * Copyright (C) 2008 Nokia Corporation * Author: Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/slab.h> diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index bf99aec5a155..76c5ed2afa72 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * MMC definitions for OMAP2 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ struct mmc_card; diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index 37ff25ee3d89..3b4b9514f4fa 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -1,22 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Helper module for board specific I2C bus registration * * Copyright (C) 2009 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * */ #include "soc.h" @@ -53,15 +39,10 @@ int omap_i2c_reset(struct omap_hwmod *oh) u16 i2c_con; int c = 0; - if (oh->class->rev == OMAP_I2C_IP_VERSION_2) { - i2c_con = OMAP4_I2C_CON_OFFSET; - } else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) { + if (soc_is_omap24xx() || soc_is_omap34xx() || soc_is_am35xx()) i2c_con = OMAP2_I2C_CON_OFFSET; - } else { - WARN(1, "Cannot reset I2C block %s: unsupported revision\n", - oh->name); - return -EINVAL; - } + else + i2c_con = OMAP4_I2C_CON_OFFSET; /* Disable I2C */ v = omap_hwmod_read(oh, i2c_con); diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h index 4d085c7ad425..1985169278c7 100644 --- a/arch/arm/mach-omap2/i2c.h +++ b/arch/arm/mach-omap2/i2c.h @@ -1,22 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Helper module for board specific I2C bus registration * * Copyright (C) 2009 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * */ #ifndef __MACH_OMAP2_I2C_H diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 859c71c4e932..188ea5258c99 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap2/id.c * @@ -8,10 +9,6 @@ * * Copyright (C) 2009-11 Texas Instruments * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-omap2/id.h b/arch/arm/mach-omap2/id.h index 02ed3aa56f1e..d1735f4497e3 100644 --- a/arch/arm/mach-omap2/id.h +++ b/arch/arm/mach-omap2/id.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2 CPU identification code * * Copyright (C) 2010 Kan-Ru Chen <kanru@0xlab.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef OMAP2_ARCH_ID_H #define OMAP2_ARCH_ID_H diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index bb8e0bb7ef5d..349e48042982 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap2/io.c * @@ -11,10 +12,6 @@ * Syed Khasim <x0khasim@ti.com> * * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> #include <linux/kernel.h> @@ -411,14 +408,9 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) static void __init __maybe_unused omap_hwmod_init_postsetup(void) { - u8 postsetup_state; + u8 postsetup_state = _HWMOD_STATE_DEFAULT; /* Set the default postsetup state for all hwmods */ -#ifdef CONFIG_PM - postsetup_state = _HWMOD_STATE_IDLE; -#else - postsetup_state = _HWMOD_STATE_ENABLED; -#endif omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state); } diff --git a/arch/arm/mach-omap2/l3_2xxx.h b/arch/arm/mach-omap2/l3_2xxx.h index b8b5641379b0..c2bd8d86202b 100644 --- a/arch/arm/mach-omap2/l3_2xxx.h +++ b/arch/arm/mach-omap2/l3_2xxx.h @@ -1,14 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions * * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ * Sumit Semwal - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * */ #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H #define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H diff --git a/arch/arm/mach-omap2/l3_3xxx.h b/arch/arm/mach-omap2/l3_3xxx.h index cde1938c5f82..995ebccd13e0 100644 --- a/arch/arm/mach-omap2/l3_3xxx.h +++ b/arch/arm/mach-omap2/l3_3xxx.h @@ -1,14 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions * * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ * Sumit Semwal - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * */ #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H #define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H diff --git a/arch/arm/mach-omap2/l4_2xxx.h b/arch/arm/mach-omap2/l4_2xxx.h index 3f39cf8a35c6..556e69c2bd00 100644 --- a/arch/arm/mach-omap2/l4_2xxx.h +++ b/arch/arm/mach-omap2/l4_2xxx.h @@ -1,14 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions * * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ * Sumit Semwal - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * */ #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H #define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H diff --git a/arch/arm/mach-omap2/l4_3xxx.h b/arch/arm/mach-omap2/l4_3xxx.h index 881a858b1ffc..4d9daa2e6f82 100644 --- a/arch/arm/mach-omap2/l4_3xxx.h +++ b/arch/arm/mach-omap2/l4_3xxx.h @@ -1,14 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/plat-omap/include/mach/l4_3xxx.h - L4 firewall definitions * * Copyright (C) 2009 Nokia Corporation * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * */ #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 4acc0dae27e0..c3604b4585a4 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap2/mcbsp.c * * Copyright (C) 2008 Instituto Nokia de Tecnologia * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Multichannel mode not supported. */ #include <linux/module.h> diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h index 9145a6f720fc..7f4e053c3434 100644 --- a/arch/arm/mach-omap2/mmc.h +++ b/arch/arm/mach-omap2/mmc.h @@ -7,7 +7,15 @@ #define OMAP4_MMC_REG_OFFSET 0x100 struct omap_hwmod; + +#ifdef CONFIG_SOC_OMAP2420 int omap_msdi_reset(struct omap_hwmod *oh); +#else +static inline int omap_msdi_reset(struct omap_hwmod *oh) +{ + return 0; +} +#endif /* called from board-specific card detection service routine */ extern void omap_mmc_notify_cover_event(struct device *dev, int slot, diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index 978fba722b82..552b2fa4e4f1 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -1,23 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * MSDI IP block reset * * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * * XXX What about pad muxing? */ diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4c6f14cf92a8..7d0db77ab8cb 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Secondary CPU startup routine source file. * @@ -9,10 +10,6 @@ * Interface functions needed for the SMP. This file is based on arm * realview smp platform. * Copyright (c) 2003 ARM Limited. - * - * This program is free software,you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index 433db6d0b073..8343fcf4f399 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP4 SMP cpu-hotplug support * @@ -8,10 +9,6 @@ * Platform file needed for the OMAP4 SMP. This file is based on arm * realview smp platform. * Copyright (c) 2002 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 4cfc4f9b2c69..2d8f90546591 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP MPUSS low power code * @@ -30,11 +31,6 @@ * * Note: CPU0 is the master core and it is the last CPU to go down * and first to wake-up when MPUSS low power states are excercised - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index fa7f308c9027..24298e47b9f1 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP Secure API infrastructure. * @@ -5,11 +6,6 @@ * Santosh Shilimkar <santosh.shilimkar@ti.com> * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> - * - * - * This program is free software,you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index c509cde71f93..20046e8f8ecb 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * omap-secure.h: OMAP Secure infrastructure header. * @@ -5,10 +6,6 @@ * Santosh Shilimkar <santosh.shilimkar@ti.com> * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef OMAP_ARCH_OMAP_SECURE_H #define OMAP_ARCH_OMAP_SECURE_H diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S index 72506e6cf9e7..630b9bd099e0 100644 --- a/arch/arm/mach-omap2/omap-smc.S +++ b/arch/arm/mach-omap2/omap-smc.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP34xx and OMAP44xx secure APIs file. * @@ -6,10 +7,6 @@ * * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> - * - * This program is free software,you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 10e070368f64..6a82fce3f822 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP4 SMP source file. It contains platform specific functions * needed for the linux smp kernel. @@ -10,10 +11,6 @@ * Platform file needed for the OMAP4 SMP. This file is based on arm * realview smp platform. * * Copyright (c) 2002 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/device.h> diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 17558be4bf0a..8d21e3a3c05f 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP WakeupGen Source file * @@ -10,10 +11,6 @@ * * Copyright (C) 2011 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> @@ -436,13 +433,13 @@ static int irq_notifier(struct notifier_block *self, unsigned long cmd, void *v) { switch (cmd) { case CPU_CLUSTER_PM_ENTER: - if (omap_type() == OMAP2_DEVICE_TYPE_GP) + if (omap_type() == OMAP2_DEVICE_TYPE_GP || soc_is_am43xx()) irq_save_context(); else irq_save_secure_context(); break; case CPU_CLUSTER_PM_EXIT: - if (omap_type() == OMAP2_DEVICE_TYPE_GP) + if (omap_type() == OMAP2_DEVICE_TYPE_GP || soc_is_am43xx()) irq_restore_context(); break; } diff --git a/arch/arm/mach-omap2/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h index a3491ad12368..bcc37b2c8ff8 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.h +++ b/arch/arm/mach-omap2/omap-wakeupgen.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP WakeupGen header file * * Copyright (C) 2011 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef OMAP_ARCH_WAKEUPGEN_H #define OMAP_ARCH_WAKEUPGEN_H diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c index 497269db882b..fdcc75c97d70 100644 --- a/arch/arm/mach-omap2/omap2-restart.c +++ b/arch/arm/mach-omap2/omap2-restart.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap2-restart.c - code common to all OMAP2xxx machines. * * Copyright (C) 2012 Texas Instruments * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-omap2/omap24xx.h b/arch/arm/mach-omap2/omap24xx.h index 641a2c8d2eee..d9ecc0578292 100644 --- a/arch/arm/mach-omap2/omap24xx.h +++ b/arch/arm/mach-omap2/omap24xx.h @@ -1,24 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * This file contains the processor specific definitions * of the TI OMAP24XX. * * Copyright (C) 2007 Texas Instruments. * Copyright (C) 2007 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef __ASM_ARCH_OMAP2_H diff --git a/arch/arm/mach-omap2/omap3-restart.c b/arch/arm/mach-omap2/omap3-restart.c index 4bdd22edb96b..bcabe6fa164e 100644 --- a/arch/arm/mach-omap2/omap3-restart.c +++ b/arch/arm/mach-omap2/omap3-restart.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap3-restart.c - Code common to all OMAP3xxx machines. * @@ -5,10 +6,6 @@ * Copyright (C) 2010 Nokia Corporation * Tony Lindgren <tony@atomide.com> * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-omap2/omap34xx.h b/arch/arm/mach-omap2/omap34xx.h index ed0024dda133..ce8cd3317948 100644 --- a/arch/arm/mach-omap2/omap34xx.h +++ b/arch/arm/mach-omap2/omap34xx.h @@ -1,22 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * This file contains the processor specific definitions of the TI OMAP34XX. * * Copyright (C) 2007 Texas Instruments. * Copyright (C) 2007 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARCH_OMAP3_H diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index b226c8aaf8b1..f9c02f9f1c92 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -1,14 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP4 specific common source file. * * Copyright (C) 2010 Texas Instruments, Inc. * Author: * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * - * This program is free software,you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/omap4-restart.c b/arch/arm/mach-omap2/omap4-restart.c index e17136a50e27..56f621314fe9 100644 --- a/arch/arm/mach-omap2/omap4-restart.c +++ b/arch/arm/mach-omap2/omap4-restart.c @@ -1,10 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap4-restart.c - Common to OMAP4 and OMAP5 - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/types.h> diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h index 9fc4e2643ce7..aabf06401200 100644 --- a/arch/arm/mach-omap2/omap4-sar-layout.h +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * omap4-sar-layout.h: OMAP4 SAR RAM layout header file * * Copyright (C) 2011 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef OMAP_ARCH_OMAP4_SAR_LAYOUT_H #define OMAP_ARCH_OMAP4_SAR_LAYOUT_H diff --git a/arch/arm/mach-omap2/omap44xx.h b/arch/arm/mach-omap2/omap44xx.h index 8a515bb74639..0595175a5467 100644 --- a/arch/arm/mach-omap2/omap44xx.h +++ b/arch/arm/mach-omap2/omap44xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /*: * Address mappings and base address for OMAP4 interconnects * and peripherals. @@ -5,10 +6,6 @@ * Copyright (C) 2009 Texas Instruments * * Author: Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_OMAP44XX_H #define __ASM_ARCH_OMAP44XX_H diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h index 0ca8e938096b..b49e633c309a 100644 --- a/arch/arm/mach-omap2/omap54xx.h +++ b/arch/arm/mach-omap2/omap54xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /*: * Address mappings and base address for OMAP5 interconnects * and peripherals. @@ -5,10 +6,6 @@ * Copyright (C) 2012 Texas Instruments * Santosh Shilimkar <santosh.shilimkar@ti.com> * Sricharan <r.sricharan@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_SOC_OMAP54XX_H #define __ASM_SOC_OMAP54XX_H diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 41c7b905980a..3acb4192918d 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap_device implementation * @@ -9,10 +10,6 @@ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard * Woodruff * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This code provides a consistent interface for OMAP device drivers * to control power management and interconnect properties of their * devices. @@ -20,8 +17,6 @@ * In the medium- to long-term, this code should be implemented as a * proper omap_bus/omap_device in Linux, no more platform_data func * pointers - * - * */ #undef DEBUG diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h index 786b9c00fdb9..ced775e401cf 100644 --- a/arch/arm/mach-omap2/omap_device.h +++ b/arch/arm/mach-omap2/omap_device.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * omap_device headers * @@ -9,10 +10,6 @@ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard * Woodruff * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This type of functionality should be implemented as a proper * omap_bus/omap_device in Linux. * diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index b5531dd3ae9c..e0350476feaa 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap_hwmod implementation for OMAP2/3/4 * @@ -10,10 +11,6 @@ * Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari Poussa, Anand * Sawant, Santosh Shilimkar, Richard Woodruff * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Introduction * ------------ * One way to view an OMAP SoC is as a collection of largely unrelated @@ -155,6 +152,8 @@ #include "soc.h" #include "common.h" #include "clockdomain.h" +#include "hdq1w.h" +#include "mmc.h" #include "powerdomain.h" #include "cm2xxx.h" #include "cm3xxx.h" @@ -165,6 +164,7 @@ #include "prm33xx.h" #include "prminst44xx.h" #include "pm.h" +#include "wd_timer.h" /* Name of the OMAP hwmod for the MPU */ #define MPU_INITIATOR_NAME "mpu" @@ -205,6 +205,20 @@ struct clkctrl_provider { static LIST_HEAD(clkctrl_providers); /** + * struct omap_hwmod_reset - IP specific reset functions + * @match: string to match against the module name + * @len: number of characters to match + * @reset: IP specific reset function + * + * Used only in cases where struct omap_hwmod is dynamically allocated. + */ +struct omap_hwmod_reset { + const char *match; + int len; + int (*reset)(struct omap_hwmod *oh); +}; + +/** * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations * @enable_module: function to enable a module (via MODULEMODE) * @disable_module: function to disable a module (via MODULEMODE) @@ -235,6 +249,7 @@ static struct omap_hwmod_soc_ops soc_ops; /* omap_hwmod_list contains all registered struct omap_hwmods */ static LIST_HEAD(omap_hwmod_list); +static DEFINE_MUTEX(list_lock); /* mpu_oh: used to add/remove MPU initiator from sleepdep list */ static struct omap_hwmod *mpu_oh; @@ -648,10 +663,10 @@ static struct clockdomain *_get_clkdm(struct omap_hwmod *oh) if (oh->clkdm) { return oh->clkdm; } else if (oh->_clk) { - if (__clk_get_flags(oh->_clk) & CLK_IS_BASIC) + if (!omap2_clk_is_hw_omap(__clk_get_hw(oh->_clk))) return NULL; clk = to_clk_hw_omap(__clk_get_hw(oh->_clk)); - return clk->clkdm; + return clk->clkdm; } return NULL; } @@ -1002,8 +1017,10 @@ static int _enable_clocks(struct omap_hwmod *oh) clk_enable(oh->_clk); list_for_each_entry(os, &oh->slave_ports, node) { - if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) + if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) { + omap2_clk_deny_idle(os->_clk); clk_enable(os->_clk); + } } /* The opt clocks are controlled by the device driver. */ @@ -1055,8 +1072,10 @@ static int _disable_clocks(struct omap_hwmod *oh) clk_disable(oh->_clk); list_for_each_entry(os, &oh->slave_ports, node) { - if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) + if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) { clk_disable(os->_clk); + omap2_clk_allow_idle(os->_clk); + } } if (oh->flags & HWMOD_OPT_CLKS_NEEDED) @@ -2436,9 +2455,13 @@ static void _setup_iclk_autoidle(struct omap_hwmod *oh) continue; if (os->flags & OCPIF_SWSUP_IDLE) { - /* XXX omap_iclk_deny_idle(c); */ + /* + * we might have multiple users of one iclk with + * different requirements, disable autoidle when + * the module is enabled, e.g. dss iclk + */ } else { - /* XXX omap_iclk_allow_idle(c); */ + /* we are enabling autoidle afterwards anyways */ clk_enable(os->_clk); } } @@ -2457,7 +2480,7 @@ static void _setup_iclk_autoidle(struct omap_hwmod *oh) */ static int _setup_reset(struct omap_hwmod *oh) { - int r; + int r = 0; if (oh->_state != _HWMOD_STATE_INITIALIZED) return -EINVAL; @@ -2616,7 +2639,7 @@ static int _setup(struct omap_hwmod *oh, void *data) * that the copy process would be relatively complex due to the large number * of substructures. */ -static int __init _register(struct omap_hwmod *oh) +static int _register(struct omap_hwmod *oh) { if (!oh || !oh->name || !oh->class || !oh->class->name || (oh->_state != _HWMOD_STATE_UNKNOWN)) @@ -2655,7 +2678,7 @@ static int __init _register(struct omap_hwmod *oh) * locking in this code. Changes to this assumption will require * additional locking. Returns 0. */ -static int __init _add_link(struct omap_hwmod_ocp_if *oi) +static int _add_link(struct omap_hwmod_ocp_if *oi) { pr_debug("omap_hwmod: %s -> %s: adding link\n", oi->master->name, oi->slave->name); @@ -3233,9 +3256,10 @@ static int omap_hwmod_init_regbits(struct device *dev, * @sysc_offs: sysc register offset * @syss_offs: syss register offset */ -int omap_hwmod_init_reg_offs(struct device *dev, - const struct ti_sysc_module_data *data, - s32 *rev_offs, s32 *sysc_offs, s32 *syss_offs) +static int omap_hwmod_init_reg_offs(struct device *dev, + const struct ti_sysc_module_data *data, + s32 *rev_offs, s32 *sysc_offs, + s32 *syss_offs) { *rev_offs = -ENODEV; *sysc_offs = 0; @@ -3259,9 +3283,9 @@ int omap_hwmod_init_reg_offs(struct device *dev, * @data: module data * @sysc_flags: module configuration */ -int omap_hwmod_init_sysc_flags(struct device *dev, - const struct ti_sysc_module_data *data, - u32 *sysc_flags) +static int omap_hwmod_init_sysc_flags(struct device *dev, + const struct ti_sysc_module_data *data, + u32 *sysc_flags) { *sysc_flags = 0; @@ -3333,9 +3357,9 @@ int omap_hwmod_init_sysc_flags(struct device *dev, * @data: module data * @idlemodes: module supported idle modes */ -int omap_hwmod_init_idlemodes(struct device *dev, - const struct ti_sysc_module_data *data, - u32 *idlemodes) +static int omap_hwmod_init_idlemodes(struct device *dev, + const struct ti_sysc_module_data *data, + u32 *idlemodes) { *idlemodes = 0; @@ -3426,14 +3450,18 @@ static int omap_hwmod_check_module(struct device *dev, * * Note that the allocations here cannot use devm as ti-sysc can rebind. */ -int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, - const struct ti_sysc_module_data *data, - struct sysc_regbits *sysc_fields, - s32 rev_offs, s32 sysc_offs, s32 syss_offs, - u32 sysc_flags, u32 idlemodes) +static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, + const struct ti_sysc_module_data *data, + struct sysc_regbits *sysc_fields, + s32 rev_offs, s32 sysc_offs, + s32 syss_offs, u32 sysc_flags, + u32 idlemodes) { struct omap_hwmod_class_sysconfig *sysc; - struct omap_hwmod_class *class; + struct omap_hwmod_class *class = NULL; + struct omap_hwmod_ocp_if *oi = NULL; + struct clockdomain *clkdm = NULL; + struct clk *clk = NULL; void __iomem *regs = NULL; unsigned long flags; @@ -3457,26 +3485,128 @@ int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, } /* - * We need new oh->class as the other devices in the same class + * We may need a new oh->class as the other devices in the same class * may not yet have ioremapped their registers. */ - class = kmemdup(oh->class, sizeof(*oh->class), GFP_KERNEL); - if (!class) - return -ENOMEM; + if (oh->class->name && strcmp(oh->class->name, data->name)) { + class = kmemdup(oh->class, sizeof(*oh->class), GFP_KERNEL); + if (!class) + return -ENOMEM; + } - class->sysc = sysc; + if (list_empty(&oh->slave_ports)) { + oi = kcalloc(1, sizeof(*oi), GFP_KERNEL); + if (!oi) + return -ENOMEM; + + /* + * Note that we assume interconnect interface clocks will be + * managed by the interconnect driver for OCPIF_SWSUP_IDLE case + * on omap24xx and omap3. + */ + oi->slave = oh; + oi->user = OCP_USER_MPU | OCP_USER_SDMA; + } + + if (!oh->_clk) { + struct clk_hw_omap *hwclk; + + clk = of_clk_get_by_name(dev->of_node, "fck"); + if (!IS_ERR(clk)) + clk_prepare(clk); + else + clk = NULL; + + /* + * Populate clockdomain based on dts clock. It is needed for + * clkdm_deny_idle() and clkdm_allow_idle() until we have have + * interconnect driver and reset driver capable of blocking + * clockdomain idle during reset, enable and idle. + */ + if (clk) { + hwclk = to_clk_hw_omap(__clk_get_hw(clk)); + if (hwclk && hwclk->clkdm_name) + clkdm = clkdm_lookup(hwclk->clkdm_name); + } + + /* + * Note that we assume interconnect driver manages the clocks + * and do not need to populate oh->_clk for dynamically + * allocated modules. + */ + clk_unprepare(clk); + clk_put(clk); + } spin_lock_irqsave(&oh->_lock, flags); if (regs) oh->_mpu_rt_va = regs; - oh->class = class; + if (class) + oh->class = class; + oh->class->sysc = sysc; + if (oi) + _add_link(oi); + if (clkdm) + oh->clkdm = clkdm; oh->_state = _HWMOD_STATE_INITIALIZED; + oh->_postsetup_state = _HWMOD_STATE_DEFAULT; _setup(oh, NULL); spin_unlock_irqrestore(&oh->_lock, flags); return 0; } +static const struct omap_hwmod_reset omap24xx_reset_quirks[] = { + { .match = "msdi", .len = 4, .reset = omap_msdi_reset, }, +}; + +static const struct omap_hwmod_reset dra7_reset_quirks[] = { + { .match = "pcie", .len = 4, .reset = dra7xx_pciess_reset, }, +}; + +static const struct omap_hwmod_reset omap_reset_quirks[] = { + { .match = "dss", .len = 3, .reset = omap_dss_reset, }, + { .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, }, + { .match = "i2c", .len = 3, .reset = omap_i2c_reset, }, + { .match = "wd_timer", .len = 8, .reset = omap2_wd_timer_reset, }, +}; + +static void +omap_hwmod_init_reset_quirk(struct device *dev, struct omap_hwmod *oh, + const struct ti_sysc_module_data *data, + const struct omap_hwmod_reset *quirks, + int quirks_sz) +{ + const struct omap_hwmod_reset *quirk; + int i; + + for (i = 0; i < quirks_sz; i++) { + quirk = &quirks[i]; + if (!strncmp(data->name, quirk->match, quirk->len)) { + oh->class->reset = quirk->reset; + + return; + } + } +} + +static void +omap_hwmod_init_reset_quirks(struct device *dev, struct omap_hwmod *oh, + const struct ti_sysc_module_data *data) +{ + if (soc_is_omap24xx()) + omap_hwmod_init_reset_quirk(dev, oh, data, + omap24xx_reset_quirks, + ARRAY_SIZE(omap24xx_reset_quirks)); + + if (soc_is_dra7xx()) + omap_hwmod_init_reset_quirk(dev, oh, data, dra7_reset_quirks, + ARRAY_SIZE(dra7_reset_quirks)); + + omap_hwmod_init_reset_quirk(dev, oh, data, omap_reset_quirks, + ARRAY_SIZE(omap_reset_quirks)); +} + /** * omap_hwmod_init_module - initialize new module * @dev: struct device @@ -3497,8 +3627,31 @@ int omap_hwmod_init_module(struct device *dev, return -EINVAL; oh = _lookup(data->name); - if (!oh) - return -ENODEV; + if (!oh) { + oh = kzalloc(sizeof(*oh), GFP_KERNEL); + if (!oh) + return -ENOMEM; + + oh->name = data->name; + oh->_state = _HWMOD_STATE_UNKNOWN; + lockdep_register_key(&oh->hwmod_key); + + /* Unused, can be handled by PRM driver handling resets */ + oh->prcm.omap4.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT; + + oh->class = kzalloc(sizeof(*oh->class), GFP_KERNEL); + if (!oh->class) { + kfree(oh); + return -ENOMEM; + } + + omap_hwmod_init_reset_quirks(dev, oh, data); + + oh->class->name = data->name; + mutex_lock(&list_lock); + error = _register(oh); + mutex_unlock(&list_lock); + } cookie->data = oh; @@ -3519,10 +3672,20 @@ int omap_hwmod_init_module(struct device *dev, if (error) return error; + if (data->cfg->quirks & SYSC_QUIRK_NO_IDLE) + oh->flags |= HWMOD_NO_IDLE; if (data->cfg->quirks & SYSC_QUIRK_NO_IDLE_ON_INIT) oh->flags |= HWMOD_INIT_NO_IDLE; if (data->cfg->quirks & SYSC_QUIRK_NO_RESET_ON_INIT) oh->flags |= HWMOD_INIT_NO_RESET; + if (data->cfg->quirks & SYSC_QUIRK_USE_CLOCKACT) + oh->flags |= HWMOD_SET_DEFAULT_CLOCKACT; + if (data->cfg->quirks & SYSC_QUIRK_SWSUP_SIDLE) + oh->flags |= HWMOD_SWSUP_SIDLE; + if (data->cfg->quirks & SYSC_QUIRK_SWSUP_SIDLE_ACT) + oh->flags |= HWMOD_SWSUP_SIDLE_ACT; + if (data->cfg->quirks & SYSC_QUIRK_SWSUP_MSTANDBY) + oh->flags |= HWMOD_SWSUP_MSTANDBY; error = omap_hwmod_check_module(dev, oh, data, sysc_fields, rev_offs, sysc_offs, syss_offs, diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index b70cdc21f8a2..ef1bb08b1a2d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * omap_hwmod macros, structures * @@ -9,10 +10,6 @@ * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * These headers and macros are used to define OMAP on-chip module * data and their integration with other OMAP modules and Linux. * Copious documentation and references can also be found in the @@ -24,7 +21,6 @@ * - init_conn_id_bit (CONNID_BIT_VECTOR) * - implement default hwmod SMS/SDRC flags? * - move Linux-specific data ("non-ROM data") out - * */ #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H @@ -493,11 +489,16 @@ struct omap_hwmod_omap4_prcm { #define _HWMOD_STATE_IDLE 5 #define _HWMOD_STATE_DISABLED 6 +#ifdef CONFIG_PM +#define _HWMOD_STATE_DEFAULT _HWMOD_STATE_IDLE +#else +#define _HWMOD_STATE_DEFAULT _HWMOD_STATE_ENABLED +#endif + /** * struct omap_hwmod_class - the type of an IP block * @name: name of the hwmod_class * @sysc: device SYSCONFIG/SYSSTATUS register data - * @rev: revision of the IP class * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown * @reset: ptr to fn to be executed in place of the standard hwmod reset fn * @enable_preprogram: ptr to fn to be executed during device enable @@ -523,7 +524,6 @@ struct omap_hwmod_omap4_prcm { struct omap_hwmod_class { const char *name; struct omap_hwmod_class_sysconfig *sysc; - u32 rev; int (*pre_shutdown)(struct omap_hwmod *oh); int (*reset)(struct omap_hwmod *oh); int (*enable_preprogram)(struct omap_hwmod *oh); diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index d684fac8f592..d49df96b4052 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap_hwmod_2420_data.c - hardware modules present on the OMAP2420 chips * @@ -5,10 +6,6 @@ * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * XXX handle crossbar/shared link difference for L3? * XXX these should be marked initdata for multi-OMAP kernels */ @@ -91,7 +88,6 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = { static struct omap_hwmod_class i2c_class = { .name = "i2c", .sysc = &i2c_sysc, - .rev = OMAP_I2C_IP_VERSION_1, .reset = &omap_i2c_reset, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index abef9f6f9bf5..c51ef84ff64d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap_hwmod_2430_data.c - hardware modules present on the OMAP2430 chips * @@ -5,10 +6,6 @@ * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * XXX handle crossbar/shared link difference for L3? * XXX these should be marked initdata for multi-OMAP kernels */ @@ -68,7 +65,6 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = { static struct omap_hwmod_class i2c_class = { .name = "i2c", .sysc = &i2c_sysc, - .rev = OMAP_I2C_IP_VERSION_1, .reset = &omap_i2c_reset, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 28665d29f23f..2581b8a5f866 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap_hwmod_2xxx_3xxx_ipblock_data.c - common IP block data for OMAP2/3 * * Copyright (C) 2011 Nokia Corporation * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/dmaengine.h> diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c index 9b30b6b471ae..eef96adea411 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -1,17 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap_hwmod_2xxx_interconnect_data.c - common interconnect data for OMAP2xxx * * Copyright (C) 2009-2011 Nokia Corporation * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * XXX handle crossbar/shared link difference for L3? * XXX these should be marked initdata for multi-OMAP kernels */ -#include <asm/sizes.h> +#include <linux/sizes.h> #include "omap_hwmod.h" #include "l3_2xxx.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 5345919a81f8..f767524d06b5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap_hwmod_2xxx_ipblock_data.c - common IP block data for OMAP2xxx * * Copyright (C) 2011 Nokia Corporation * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/types.h> @@ -96,7 +93,6 @@ static struct omap_hwmod_class_sysconfig omap2xxx_gpio_sysc = { struct omap_hwmod_class omap2xxx_gpio_hwmod_class = { .name = "gpio", .sysc = &omap2xxx_gpio_sysc, - .rev = 0, }; /* system dma */ diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h index 6f81d7a4fec1..aaa6092426ea 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -30,24 +30,16 @@ extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx; extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc; extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan0; extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan1; -extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio1; -extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio2; -extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio3; extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio; extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2; extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc; -extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c2; -extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c3; extern struct omap_hwmod_ocp_if am33xx_l4_per__mailbox; extern struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock; extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0; extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1; -extern struct omap_hwmod_ocp_if am33xx_l3_s__mmc2; extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0; extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1; extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2; @@ -60,11 +52,6 @@ extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc; extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0; extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1; extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart2; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart3; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart4; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart5; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart6; extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc; extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0; extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0; @@ -93,19 +80,10 @@ extern struct omap_hwmod am33xx_elm_hwmod; extern struct omap_hwmod am33xx_epwmss0_hwmod; extern struct omap_hwmod am33xx_epwmss1_hwmod; extern struct omap_hwmod am33xx_epwmss2_hwmod; -extern struct omap_hwmod am33xx_gpio1_hwmod; -extern struct omap_hwmod am33xx_gpio2_hwmod; -extern struct omap_hwmod am33xx_gpio3_hwmod; extern struct omap_hwmod am33xx_gpmc_hwmod; -extern struct omap_hwmod am33xx_i2c1_hwmod; -extern struct omap_hwmod am33xx_i2c2_hwmod; -extern struct omap_hwmod am33xx_i2c3_hwmod; extern struct omap_hwmod am33xx_mailbox_hwmod; extern struct omap_hwmod am33xx_mcasp0_hwmod; extern struct omap_hwmod am33xx_mcasp1_hwmod; -extern struct omap_hwmod am33xx_mmc0_hwmod; -extern struct omap_hwmod am33xx_mmc1_hwmod; -extern struct omap_hwmod am33xx_mmc2_hwmod; extern struct omap_hwmod am33xx_rtc_hwmod; extern struct omap_hwmod am33xx_spi0_hwmod; extern struct omap_hwmod am33xx_spi1_hwmod; @@ -121,19 +99,12 @@ extern struct omap_hwmod am33xx_tpcc_hwmod; extern struct omap_hwmod am33xx_tptc0_hwmod; extern struct omap_hwmod am33xx_tptc1_hwmod; extern struct omap_hwmod am33xx_tptc2_hwmod; -extern struct omap_hwmod am33xx_uart1_hwmod; -extern struct omap_hwmod am33xx_uart2_hwmod; -extern struct omap_hwmod am33xx_uart3_hwmod; -extern struct omap_hwmod am33xx_uart4_hwmod; -extern struct omap_hwmod am33xx_uart5_hwmod; -extern struct omap_hwmod am33xx_uart6_hwmod; extern struct omap_hwmod am33xx_wd_timer1_hwmod; extern struct omap_hwmod_class am33xx_emif_hwmod_class; extern struct omap_hwmod_class am33xx_l4_hwmod_class; extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class; extern struct omap_hwmod_class am33xx_control_hwmod_class; -extern struct omap_hwmod_class am33xx_gpio_hwmod_class; extern struct omap_hwmod_class am33xx_timer_hwmod_class; extern struct omap_hwmod_class am33xx_epwmss_hwmod_class; extern struct omap_hwmod_class am33xx_ehrpwm_hwmod_class; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index e0001232bb4f..47a0e301b193 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -122,30 +122,6 @@ struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4 per/ls -> GPIO2 */ -struct omap_hwmod_ocp_if am33xx_l4_per__gpio1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_gpio1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 per/ls -> gpio3 */ -struct omap_hwmod_ocp_if am33xx_l4_per__gpio2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_gpio2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 per/ls -> gpio4 */ -struct omap_hwmod_ocp_if am33xx_l4_per__gpio3 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_gpio3_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = { .master = &am33xx_cpgmac0_hwmod, .slave = &am33xx_mdio_hwmod, @@ -188,21 +164,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = { .user = OCP_USER_MPU, }; -/* i2c2 */ -struct omap_hwmod_ocp_if am33xx_l4_per__i2c2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_i2c2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_i2c3_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - /* l4 ls -> mailbox */ struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = { .master = &am33xx_l4_ls_hwmod, @@ -235,30 +196,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = { .user = OCP_USER_MPU, }; -/* l4 ls -> mmc0 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mmc0_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> mmc1 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mmc1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l3 s -> mmc2 */ -struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_mmc2_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU, -}; - /* l4 ls -> mcspi0 */ struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = { .master = &am33xx_l4_ls_hwmod, @@ -355,46 +292,6 @@ struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = { .user = OCP_USER_MPU, }; -/* l4 ls -> uart2 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__uart2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> uart3 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__uart3 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart3_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> uart4 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__uart4 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart4_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> uart5 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__uart5 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart5_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> uart6 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__uart6 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart6_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - /* l3 main -> ocmc */ struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = { .master = &am33xx_l3_main_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 9ded7bf972e7..4c3543bae562 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -16,9 +16,7 @@ #include <linux/types.h> -#include <linux/platform_data/hsmmc-omap.h> #include "omap_hwmod.h" -#include "i2c.h" #include "wd_timer.h" #include "cm33xx.h" #include "prm33xx.h" @@ -534,7 +532,6 @@ static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = { struct omap_hwmod_class am33xx_gpio_hwmod_class = { .name = "gpio", .sysc = &am33xx_gpio_sysc, - .rev = 2, }; /* gpio1 */ @@ -627,68 +624,6 @@ struct omap_hwmod am33xx_gpmc_hwmod = { }, }; -/* 'i2c' class */ -static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = { - .rev_offs = 0, - .sysc_offs = 0x0010, - .syss_offs = 0x0090, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class i2c_class = { - .name = "i2c", - .sysc = &am33xx_i2c_sysc, - .rev = OMAP_I2C_IP_VERSION_2, - .reset = &omap_i2c_reset, -}; - -/* i2c1 */ -struct omap_hwmod am33xx_i2c1_hwmod = { - .name = "i2c1", - .class = &i2c_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "dpll_per_m2_div4_wkupdm_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c1 */ -struct omap_hwmod am33xx_i2c2_hwmod = { - .name = "i2c2", - .class = &i2c_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c3 */ -struct omap_hwmod am33xx_i2c3_hwmod = { - .name = "i2c3", - .class = &i2c_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* * 'mailbox' class * mailbox module allowing communication between the on-chip processors using a @@ -762,76 +697,6 @@ struct omap_hwmod am33xx_mcasp1_hwmod = { }, }; -/* 'mmc' class */ -static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = { - .rev_offs = 0x2fc, - .sysc_offs = 0x110, - .syss_offs = 0x114, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_mmc_hwmod_class = { - .name = "mmc", - .sysc = &am33xx_mmc_sysc, -}; - -/* mmc0 */ -static struct omap_hsmmc_dev_attr am33xx_mmc0_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; - -struct omap_hwmod am33xx_mmc0_hwmod = { - .name = "mmc1", - .class = &am33xx_mmc_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "mmc_clk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &am33xx_mmc0_dev_attr, -}; - -/* mmc1 */ -static struct omap_hsmmc_dev_attr am33xx_mmc1_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; - -struct omap_hwmod am33xx_mmc1_hwmod = { - .name = "mmc2", - .class = &am33xx_mmc_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "mmc_clk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &am33xx_mmc1_dev_attr, -}; - -/* mmc2 */ -static struct omap_hsmmc_dev_attr am33xx_mmc2_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; -struct omap_hwmod am33xx_mmc2_hwmod = { - .name = "mmc3", - .class = &am33xx_mmc_hwmod_class, - .clkdm_name = "l3s_clkdm", - .main_clk = "mmc_clk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &am33xx_mmc2_dev_attr, -}; - /* * 'rtc' class * rtc subsystem @@ -1132,102 +997,6 @@ struct omap_hwmod am33xx_tptc2_hwmod = { }, }; -/* 'uart' class */ -static struct omap_hwmod_class_sysconfig uart_sysc = { - .rev_offs = 0x50, - .sysc_offs = 0x54, - .syss_offs = 0x58, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class uart_class = { - .name = "uart", - .sysc = &uart_sysc, -}; - -struct omap_hwmod am33xx_uart1_hwmod = { - .name = "uart1", - .class = &uart_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_wkupdm_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -struct omap_hwmod am33xx_uart2_hwmod = { - .name = "uart2", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart3 */ -struct omap_hwmod am33xx_uart3_hwmod = { - .name = "uart3", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -struct omap_hwmod am33xx_uart4_hwmod = { - .name = "uart4", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -struct omap_hwmod am33xx_uart5_hwmod = { - .name = "uart5", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -struct omap_hwmod am33xx_uart6_hwmod = { - .name = "uart6", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* 'wd_timer' class */ static struct omap_hwmod_class_sysconfig wdt_sysc = { .rev_offs = 0x0, @@ -1265,11 +1034,6 @@ struct omap_hwmod am33xx_wd_timer1_hwmod = { static void omap_hwmod_am33xx_clkctrl(void) { - CLKCTRL(am33xx_uart2_hwmod, AM33XX_CM_PER_UART1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart3_hwmod, AM33XX_CM_PER_UART2_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart4_hwmod, AM33XX_CM_PER_UART3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart5_hwmod, AM33XX_CM_PER_UART4_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart6_hwmod, AM33XX_CM_PER_UART5_CLKCTRL_OFFSET); CLKCTRL(am33xx_dcan0_hwmod, AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET); CLKCTRL(am33xx_dcan1_hwmod, AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET); CLKCTRL(am33xx_elm_hwmod, AM33XX_CM_PER_ELM_CLKCTRL_OFFSET); @@ -1279,13 +1043,9 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_gpio1_hwmod, AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpio2_hwmod, AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpio3_hwmod, AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_i2c2_hwmod, AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_i2c3_hwmod, AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET); CLKCTRL(am33xx_mailbox_hwmod, AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET); CLKCTRL(am33xx_mcasp0_hwmod, AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET); CLKCTRL(am33xx_mcasp1_hwmod, AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mmc0_hwmod, AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mmc1_hwmod, AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi0_hwmod, AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi1_hwmod, AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spinlock_hwmod, AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET); @@ -1299,13 +1059,10 @@ static void omap_hwmod_am33xx_clkctrl(void) AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET); CLKCTRL(am33xx_smartreflex1_hwmod, AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart1_hwmod, AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET); CLKCTRL(am33xx_timer1_hwmod, AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET); CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET); PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); @@ -1340,11 +1097,6 @@ void omap_hwmod_am33xx_reg(void) static void omap_hwmod_am43xx_clkctrl(void) { - CLKCTRL(am33xx_uart2_hwmod, AM43XX_CM_PER_UART1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart3_hwmod, AM43XX_CM_PER_UART2_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart4_hwmod, AM43XX_CM_PER_UART3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart5_hwmod, AM43XX_CM_PER_UART4_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart6_hwmod, AM43XX_CM_PER_UART5_CLKCTRL_OFFSET); CLKCTRL(am33xx_dcan0_hwmod, AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET); CLKCTRL(am33xx_dcan1_hwmod, AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET); CLKCTRL(am33xx_elm_hwmod, AM43XX_CM_PER_ELM_CLKCTRL_OFFSET); @@ -1354,13 +1106,9 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_gpio1_hwmod, AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpio2_hwmod, AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpio3_hwmod, AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_i2c2_hwmod, AM43XX_CM_PER_I2C1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_i2c3_hwmod, AM43XX_CM_PER_I2C2_CLKCTRL_OFFSET); CLKCTRL(am33xx_mailbox_hwmod, AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET); CLKCTRL(am33xx_mcasp0_hwmod, AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET); CLKCTRL(am33xx_mcasp1_hwmod, AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mmc0_hwmod, AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mmc1_hwmod, AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi0_hwmod, AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi1_hwmod, AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spinlock_hwmod, AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET); @@ -1374,12 +1122,9 @@ static void omap_hwmod_am43xx_clkctrl(void) AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET); CLKCTRL(am33xx_smartreflex1_hwmod, AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart1_hwmod, AM43XX_CM_WKUP_UART0_CLKCTRL_OFFSET); CLKCTRL(am33xx_timer1_hwmod, AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_i2c1_hwmod, AM43XX_CM_WKUP_I2C0_CLKCTRL_OFFSET); CLKCTRL(am33xx_wd_timer1_hwmod, AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mmc2_hwmod, AM43XX_CM_PER_MMC2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index c9483bc06228..c965af275e34 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -14,8 +14,6 @@ * GNU General Public License for more details. */ -#include <linux/platform_data/i2c-omap.h> - #include "omap_hwmod.h" #include "omap_hwmod_common_data.h" @@ -23,7 +21,6 @@ #include "cm33xx.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" -#include "i2c.h" #include "wd_timer.h" #include "omap_hwmod_33xx_43xx_common_data.h" @@ -230,27 +227,6 @@ static struct omap_hwmod am33xx_control_hwmod = { }, }; -/* gpio0 */ -static struct omap_hwmod_opt_clk gpio0_opt_clks[] = { - { .role = "dbclk", .clk = "gpio0_dbclk" }, -}; - -static struct omap_hwmod am33xx_gpio0_hwmod = { - .name = "gpio1", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "dpll_core_m4_div2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio0_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio0_opt_clks), -}; - /* lcdc */ static struct omap_hwmod_class_sysconfig lcdc_sysc = { .rev_offs = 0x0, @@ -388,22 +364,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = { .user = OCP_USER_MPU, }; -/* L4 WKUP -> I2C1 */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__i2c1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_i2c1_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU, -}; - -/* L4 WKUP -> GPIO1 */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__gpio0 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_gpio0_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* L4 WKUP -> ADC_TSC */ static struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = { .master = &am33xx_l4_wkup_hwmod, @@ -434,14 +394,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = { .user = OCP_USER_MPU, }; -/* l4 wkup -> uart1 */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__uart1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_uart1_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU, -}; - /* l4 wkup -> wd_timer1 */ static struct omap_hwmod_ocp_if am33xx_l4_wkup__wd_timer1 = { .master = &am33xx_l4_wkup_hwmod, @@ -479,27 +431,16 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__control, &am33xx_l4_wkup__smartreflex0, &am33xx_l4_wkup__smartreflex1, - &am33xx_l4_wkup__uart1, &am33xx_l4_wkup__timer1, &am33xx_l4_wkup__rtc, - &am33xx_l4_wkup__i2c1, - &am33xx_l4_wkup__gpio0, &am33xx_l4_wkup__adc_tsc, &am33xx_l4_wkup__wd_timer1, &am33xx_l4_hs__pruss, &am33xx_l4_per__dcan0, &am33xx_l4_per__dcan1, - &am33xx_l4_per__gpio1, - &am33xx_l4_per__gpio2, - &am33xx_l4_per__gpio3, - &am33xx_l4_per__i2c2, - &am33xx_l4_per__i2c3, &am33xx_l4_per__mailbox, &am33xx_l4_ls__mcasp0, &am33xx_l4_ls__mcasp1, - &am33xx_l4_ls__mmc0, - &am33xx_l4_ls__mmc1, - &am33xx_l3_s__mmc2, &am33xx_l4_ls__timer2, &am33xx_l4_ls__timer3, &am33xx_l4_ls__timer4, @@ -507,11 +448,6 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_ls__timer6, &am33xx_l4_ls__timer7, &am33xx_l3_main__tpcc, - &am33xx_l4_ls__uart2, - &am33xx_l4_ls__uart3, - &am33xx_l4_ls__uart4, - &am33xx_l4_ls__uart5, - &am33xx_l4_ls__uart6, &am33xx_l4_ls__spinlock, &am33xx_l4_ls__elm, &am33xx_l4_ls__epwmss0, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 23e6a41a18eb..f52438bdfc14 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap_hwmod_3xxx_data.c - hardware modules present on the OMAP3xxx chips * @@ -5,10 +6,6 @@ * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * The data in this file should be completely autogeneratable from * the TI hardware database or other technical documentation. * @@ -484,7 +481,6 @@ static struct omap_hwmod am35xx_uart4_hwmod = { static struct omap_hwmod_class i2c_class = { .name = "i2c", .sysc = &i2c_sysc, - .rev = OMAP_I2C_IP_VERSION_1, .reset = &omap_i2c_reset, }; @@ -707,7 +703,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_gpio_sysc = { static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = { .name = "gpio", .sysc = &omap3xxx_gpio_sysc, - .rev = 1, }; /* gpio1 */ @@ -1029,7 +1024,6 @@ static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = { static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = { .name = "smartreflex", .sysc = &omap34xx_sr_sysc, - .rev = 1, }; static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = { @@ -1044,7 +1038,6 @@ static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = { static struct omap_hwmod_class omap36xx_smartreflex_hwmod_class = { .name = "smartreflex", .sysc = &omap36xx_sr_sysc, - .rev = 2, }; /* SR1 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index aa271ac5ebac..69571abc14fd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -87,26 +87,6 @@ static struct omap_hwmod am43xx_control_hwmod = { }, }; -static struct omap_hwmod_opt_clk gpio0_opt_clks[] = { - { .role = "dbclk", .clk = "gpio0_dbclk" }, -}; - -static struct omap_hwmod am43xx_gpio0_hwmod = { - .name = "gpio1", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "sys_clkin_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio0_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio0_opt_clks), -}; - static struct omap_hwmod_class_sysconfig am43xx_synctimer_sysc = { .rev_offs = 0x0, .sysc_offs = 0x4, @@ -264,46 +244,6 @@ static struct omap_hwmod am43xx_spi4_hwmod = { }, }; -static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { - { .role = "dbclk", .clk = "gpio4_dbclk" }, -}; - -static struct omap_hwmod am43xx_gpio4_hwmod = { - .name = "gpio5", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_GPIO4_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio4_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), -}; - -static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { - { .role = "dbclk", .clk = "gpio5_dbclk" }, -}; - -static struct omap_hwmod am43xx_gpio5_hwmod = { - .name = "gpio6", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_GPIO5_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio5_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), -}; - static struct omap_hwmod_class am43xx_ocp2scp_hwmod_class = { .name = "ocp2scp", }; @@ -650,20 +590,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_l4_wkup__i2c1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_i2c1_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_wkup__gpio0 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am43xx_gpio0_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if am43xx_l4_wkup__adc_tsc = { .master = &am33xx_l4_wkup_hwmod, .slave = &am43xx_adc_tsc_hwmod, @@ -685,13 +611,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_l4_wkup__uart1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_uart1_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if am43xx_l4_wkup__wd_timer1 = { .master = &am33xx_l4_wkup_hwmod, .slave = &am33xx_wd_timer1_hwmod, @@ -776,20 +695,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi4 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_l4_ls__gpio4 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am43xx_gpio4_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_ls__gpio5 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am43xx_gpio5_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp0 = { .master = &am33xx_l4_ls_hwmod, .slave = &am43xx_ocp2scp0_hwmod, @@ -907,8 +812,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_ls__mcspi2, &am43xx_l4_ls__mcspi3, &am43xx_l4_ls__mcspi4, - &am43xx_l4_ls__gpio4, - &am43xx_l4_ls__gpio5, &am43xx_l3_main__pruss, &am33xx_mpu__l3_main, &am33xx_mpu__prcm, @@ -927,27 +830,16 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_wkup__control, &am43xx_l4_wkup__smartreflex0, &am43xx_l4_wkup__smartreflex1, - &am43xx_l4_wkup__uart1, &am43xx_l4_wkup__timer1, - &am43xx_l4_wkup__i2c1, - &am43xx_l4_wkup__gpio0, &am43xx_l4_wkup__wd_timer1, &am43xx_l4_wkup__adc_tsc, &am43xx_l3_s__qspi, &am33xx_l4_per__dcan0, &am33xx_l4_per__dcan1, - &am33xx_l4_per__gpio1, - &am33xx_l4_per__gpio2, - &am33xx_l4_per__gpio3, - &am33xx_l4_per__i2c2, - &am33xx_l4_per__i2c3, &am33xx_l4_per__mailbox, &am33xx_l4_per__rng, &am33xx_l4_ls__mcasp0, &am33xx_l4_ls__mcasp1, - &am33xx_l4_ls__mmc0, - &am33xx_l4_ls__mmc1, - &am33xx_l3_s__mmc2, &am33xx_l4_ls__timer2, &am33xx_l4_ls__timer3, &am33xx_l4_ls__timer4, @@ -955,11 +847,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_ls__timer6, &am33xx_l4_ls__timer7, &am33xx_l3_main__tpcc, - &am33xx_l4_ls__uart2, - &am33xx_l4_ls__uart3, - &am33xx_l4_ls__uart4, - &am33xx_l4_ls__uart5, - &am33xx_l4_ls__uart6, &am33xx_l4_ls__spinlock, &am33xx_l4_ls__elm, &am33xx_l4_ls__epwmss0, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index a95dbac57a81..a6f2a10cdc3e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hardware modules present on the OMAP44xx chips * @@ -14,16 +15,10 @@ * up-to-date with the file contents. * Note that this file is currently not in sync with autogeneration scripts. * The above note to be removed, once it is synced up. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/io.h> -#include <linux/platform_data/hsmmc-omap.h> #include <linux/power/smartreflex.h> -#include <linux/platform_data/i2c-omap.h> #include <linux/omap-dma.h> @@ -33,7 +28,6 @@ #include "cm2_44xx.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" -#include "i2c.h" #include "wd_timer.h" /* Base offset for all OMAP4 interrupts external to MPUSS */ @@ -1056,160 +1050,6 @@ static struct omap_hwmod omap44xx_fdif_hwmod = { }; /* - * 'gpio' class - * general purpose io module - */ - -static struct omap_hwmod_class_sysconfig omap44xx_gpio_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0114, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_gpio_hwmod_class = { - .name = "gpio", - .sysc = &omap44xx_gpio_sysc, - .rev = 2, -}; - -/* gpio1 */ -static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { - { .role = "dbclk", .clk = "gpio1_dbclk" }, -}; - -static struct omap_hwmod omap44xx_gpio1_hwmod = { - .name = "gpio1", - .class = &omap44xx_gpio_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .main_clk = "l4_wkup_clk_mux_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), -}; - -/* gpio2 */ -static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { - { .role = "dbclk", .clk = "gpio2_dbclk" }, -}; - -static struct omap_hwmod omap44xx_gpio2_hwmod = { - .name = "gpio2", - .class = &omap44xx_gpio_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), -}; - -/* gpio3 */ -static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { - { .role = "dbclk", .clk = "gpio3_dbclk" }, -}; - -static struct omap_hwmod omap44xx_gpio3_hwmod = { - .name = "gpio3", - .class = &omap44xx_gpio_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), -}; - -/* gpio4 */ -static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { - { .role = "dbclk", .clk = "gpio4_dbclk" }, -}; - -static struct omap_hwmod omap44xx_gpio4_hwmod = { - .name = "gpio4", - .class = &omap44xx_gpio_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio4_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), -}; - -/* gpio5 */ -static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { - { .role = "dbclk", .clk = "gpio5_dbclk" }, -}; - -static struct omap_hwmod omap44xx_gpio5_hwmod = { - .name = "gpio5", - .class = &omap44xx_gpio_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio5_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), -}; - -/* gpio6 */ -static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { - { .role = "dbclk", .clk = "gpio6_dbclk" }, -}; - -static struct omap_hwmod omap44xx_gpio6_hwmod = { - .name = "gpio6", - .class = &omap44xx_gpio_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio6_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), -}; - -/* * 'gpmc' class * general purpose memory controller */ @@ -1355,94 +1195,6 @@ static struct omap_hwmod omap44xx_hsi_hwmod = { }; /* - * 'i2c' class - * multimaster high-speed i2c controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = { - .rev_offs = 0, - .sysc_offs = 0x0010, - .syss_offs = 0x0090, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_i2c_hwmod_class = { - .name = "i2c", - .sysc = &omap44xx_i2c_sysc, - .rev = OMAP_I2C_IP_VERSION_2, - .reset = &omap_i2c_reset, -}; - -/* i2c1 */ -static struct omap_hwmod omap44xx_i2c1_hwmod = { - .name = "i2c1", - .class = &omap44xx_i2c_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c2 */ -static struct omap_hwmod omap44xx_i2c2_hwmod = { - .name = "i2c2", - .class = &omap44xx_i2c_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c3 */ -static struct omap_hwmod omap44xx_i2c3_hwmod = { - .name = "i2c3", - .class = &omap44xx_i2c_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c4 */ -static struct omap_hwmod omap44xx_i2c4_hwmod = { - .name = "i2c4", - .class = &omap44xx_i2c_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'ipu' class * imaging processor unit */ @@ -1819,189 +1571,6 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { }; /* - * 'mcspi' class - * multichannel serial port interface (mcspi) / master/slave synchronous serial - * bus - */ - -static struct omap_hwmod_class_sysconfig omap44xx_mcspi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_mcspi_hwmod_class = { - .name = "mcspi", - .sysc = &omap44xx_mcspi_sysc, -}; - -/* mcspi1 */ -static struct omap_hwmod omap44xx_mcspi1_hwmod = { - .name = "mcspi1", - .class = &omap44xx_mcspi_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcspi2 */ -static struct omap_hwmod omap44xx_mcspi2_hwmod = { - .name = "mcspi2", - .class = &omap44xx_mcspi_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcspi3 */ -static struct omap_hwmod omap44xx_mcspi3_hwmod = { - .name = "mcspi3", - .class = &omap44xx_mcspi_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcspi4 */ -static struct omap_hwmod omap44xx_mcspi4_hwmod = { - .name = "mcspi4", - .class = &omap44xx_mcspi_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'mmc' class - * multimedia card high-speed/sd/sdio (mmc/sd/sdio) host controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_mmc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_mmc_hwmod_class = { - .name = "mmc", - .sysc = &omap44xx_mmc_sysc, -}; - -/* mmc1 */ -static struct omap_hsmmc_dev_attr mmc1_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; - -static struct omap_hwmod omap44xx_mmc1_hwmod = { - .name = "mmc1", - .class = &omap44xx_mmc_hwmod_class, - .clkdm_name = "l3_init_clkdm", - .main_clk = "hsmmc1_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &mmc1_dev_attr, -}; - -/* mmc2 */ -static struct omap_hwmod omap44xx_mmc2_hwmod = { - .name = "mmc2", - .class = &omap44xx_mmc_hwmod_class, - .clkdm_name = "l3_init_clkdm", - .main_clk = "hsmmc2_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mmc3 */ -static struct omap_hwmod omap44xx_mmc3_hwmod = { - .name = "mmc3", - .class = &omap44xx_mmc_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mmc4 */ -static struct omap_hwmod omap44xx_mmc4_hwmod = { - .name = "mmc4", - .class = &omap44xx_mmc_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mmc5 */ -static struct omap_hwmod omap44xx_mmc5_hwmod = { - .name = "mmc5", - .class = &omap44xx_mmc_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'mmu' class * The memory management unit performs virtual to physical address translation * for its requestors. @@ -2367,7 +1936,6 @@ static struct omap_hwmod_class_sysconfig omap44xx_smartreflex_sysc = { static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = { .name = "smartreflex", .sysc = &omap44xx_smartreflex_sysc, - .rev = 2, }; /* smartreflex_core */ @@ -2673,92 +2241,6 @@ static struct omap_hwmod omap44xx_timer11_hwmod = { }; /* - * 'uart' class - * universal asynchronous receiver/transmitter (uart) - */ - -static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = { - .rev_offs = 0x0050, - .sysc_offs = 0x0054, - .syss_offs = 0x0058, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_uart_hwmod_class = { - .name = "uart", - .sysc = &omap44xx_uart_sysc, -}; - -/* uart1 */ -static struct omap_hwmod omap44xx_uart1_hwmod = { - .name = "uart1", - .class = &omap44xx_uart_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart2 */ -static struct omap_hwmod omap44xx_uart2_hwmod = { - .name = "uart2", - .class = &omap44xx_uart_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart3 */ -static struct omap_hwmod omap44xx_uart3_hwmod = { - .name = "uart3", - .class = &omap44xx_uart_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart4 */ -static struct omap_hwmod omap44xx_uart4_hwmod = { - .name = "uart4", - .class = &omap44xx_uart_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'usb_host_fs' class * full-speed usb host controller */ @@ -3082,22 +2564,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* mmc1 -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_mmc1__l3_main_1 = { - .master = &omap44xx_mmc1_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mmc2 -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_mmc2__l3_main_1 = { - .master = &omap44xx_mmc2_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* mpu -> l3_main_1 */ static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = { .master = &omap44xx_mpu_hwmod, @@ -3554,54 +3020,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__fdif = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> gpio1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_gpio1_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio4_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio5 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio5_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio6 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio6_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_2 -> gpmc */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = { .master = &omap44xx_l3_main_2_hwmod, @@ -3634,38 +3052,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per -> i2c1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_i2c1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_i2c2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_i2c3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_i2c4_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_2 -> ipu */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = { .master = &omap44xx_l3_main_2_hwmod, @@ -3770,78 +3156,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per -> mcspi1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcspi1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcspi2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcspi2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcspi3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcspi3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcspi4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcspi4_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc4_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc5 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc5 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc5_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_2 -> ocmc_ram */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = { .master = &omap44xx_l3_main_2_hwmod, @@ -4050,38 +3364,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per -> uart1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_uart1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_uart2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_uart3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_uart4_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> usb_host_fs */ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = { .master = &omap44xx_l4_cfg_hwmod, @@ -4164,8 +3446,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_dss__l3_main_1, &omap44xx_l3_main_2__l3_main_1, &omap44xx_l4_cfg__l3_main_1, - &omap44xx_mmc1__l3_main_1, - &omap44xx_mmc2__l3_main_1, &omap44xx_mpu__l3_main_1, &omap44xx_debugss__l3_main_2, &omap44xx_dma_system__l3_main_2, @@ -4222,20 +3502,10 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__dss_venc, &omap44xx_l4_per__elm, &omap44xx_l4_cfg__fdif, - &omap44xx_l4_wkup__gpio1, - &omap44xx_l4_per__gpio2, - &omap44xx_l4_per__gpio3, - &omap44xx_l4_per__gpio4, - &omap44xx_l4_per__gpio5, - &omap44xx_l4_per__gpio6, &omap44xx_l3_main_2__gpmc, &omap44xx_l3_main_2__gpu, &omap44xx_l4_per__hdq1w, &omap44xx_l4_cfg__hsi, - &omap44xx_l4_per__i2c1, - &omap44xx_l4_per__i2c2, - &omap44xx_l4_per__i2c3, - &omap44xx_l4_per__i2c4, &omap44xx_l3_main_2__ipu, &omap44xx_l3_main_2__iss, /* &omap44xx_iva__sl2if, */ @@ -4249,15 +3519,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_abe__mcbsp3, &omap44xx_l4_per__mcbsp4, &omap44xx_l4_abe__mcpdm, - &omap44xx_l4_per__mcspi1, - &omap44xx_l4_per__mcspi2, - &omap44xx_l4_per__mcspi3, - &omap44xx_l4_per__mcspi4, - &omap44xx_l4_per__mmc1, - &omap44xx_l4_per__mmc2, - &omap44xx_l4_per__mmc3, - &omap44xx_l4_per__mmc4, - &omap44xx_l4_per__mmc5, &omap44xx_l3_main_2__mmu_ipu, &omap44xx_l4_cfg__mmu_dsp, &omap44xx_l3_main_2__ocmc_ram, @@ -4286,10 +3547,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__timer9, &omap44xx_l4_per__timer10, &omap44xx_l4_per__timer11, - &omap44xx_l4_per__uart1, - &omap44xx_l4_per__uart2, - &omap44xx_l4_per__uart3, - &omap44xx_l4_per__uart4, /* &omap44xx_l4_cfg__usb_host_fs, */ &omap44xx_l4_cfg__usb_host_hs, &omap44xx_l4_cfg__usb_otg_hs, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 115473d441cd..8006b4383534 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hardware modules present on the OMAP54xx chips * @@ -11,16 +12,10 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/io.h> -#include <linux/platform_data/hsmmc-omap.h> #include <linux/power/smartreflex.h> -#include <linux/platform_data/i2c-omap.h> #include <linux/omap-dma.h> @@ -29,7 +24,6 @@ #include "cm1_54xx.h" #include "cm2_54xx.h" #include "prm54xx.h" -#include "i2c.h" #include "wd_timer.h" /* Base offset for all OMAP5 interrupts external to MPUSS */ @@ -601,308 +595,6 @@ static struct omap_hwmod omap54xx_emif2_hwmod = { }; /* - * 'gpio' class - * general purpose io module - */ - -static struct omap_hwmod_class_sysconfig omap54xx_gpio_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0114, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_gpio_hwmod_class = { - .name = "gpio", - .sysc = &omap54xx_gpio_sysc, - .rev = 2, -}; - -/* gpio1 */ -static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { - { .role = "dbclk", .clk = "gpio1_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio1_hwmod = { - .name = "gpio1", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .main_clk = "wkupaon_iclk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_WKUPAON_GPIO1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_WKUPAON_GPIO1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), -}; - -/* gpio2 */ -static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { - { .role = "dbclk", .clk = "gpio2_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio2_hwmod = { - .name = "gpio2", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), -}; - -/* gpio3 */ -static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { - { .role = "dbclk", .clk = "gpio3_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio3_hwmod = { - .name = "gpio3", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), -}; - -/* gpio4 */ -static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { - { .role = "dbclk", .clk = "gpio4_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio4_hwmod = { - .name = "gpio4", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO4_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio4_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), -}; - -/* gpio5 */ -static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { - { .role = "dbclk", .clk = "gpio5_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio5_hwmod = { - .name = "gpio5", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO5_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio5_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), -}; - -/* gpio6 */ -static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { - { .role = "dbclk", .clk = "gpio6_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio6_hwmod = { - .name = "gpio6", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO6_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO6_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio6_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), -}; - -/* gpio7 */ -static struct omap_hwmod_opt_clk gpio7_opt_clks[] = { - { .role = "dbclk", .clk = "gpio7_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio7_hwmod = { - .name = "gpio7", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO7_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO7_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio7_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio7_opt_clks), -}; - -/* gpio8 */ -static struct omap_hwmod_opt_clk gpio8_opt_clks[] = { - { .role = "dbclk", .clk = "gpio8_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio8_hwmod = { - .name = "gpio8", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO8_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO8_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio8_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio8_opt_clks), -}; - -/* - * 'i2c' class - * multimaster high-speed i2c controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_i2c_sysc = { - .rev_offs = 0, - .sysc_offs = 0x0010, - .syss_offs = 0x0090, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_i2c_hwmod_class = { - .name = "i2c", - .sysc = &omap54xx_i2c_sysc, - .reset = &omap_i2c_reset, - .rev = OMAP_I2C_IP_VERSION_2, -}; - -/* i2c1 */ -static struct omap_hwmod omap54xx_i2c1_hwmod = { - .name = "i2c1", - .class = &omap54xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_I2C1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_I2C1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c2 */ -static struct omap_hwmod omap54xx_i2c2_hwmod = { - .name = "i2c2", - .class = &omap54xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_I2C2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_I2C2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c3 */ -static struct omap_hwmod omap54xx_i2c3_hwmod = { - .name = "i2c3", - .class = &omap54xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_I2C3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_I2C3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c4 */ -static struct omap_hwmod omap54xx_i2c4_hwmod = { - .name = "i2c4", - .class = &omap54xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_I2C4_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_I2C4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c5 */ -static struct omap_hwmod omap54xx_i2c5_hwmod = { - .name = "i2c5", - .class = &omap54xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_I2C5_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_I2C5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'kbd' class * keyboard controller */ @@ -1185,115 +877,6 @@ static struct omap_hwmod omap54xx_mcspi4_hwmod = { }; /* - * 'mmc' class - * multimedia card high-speed/sd/sdio (mmc/sd/sdio) host controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_mmc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_mmc_hwmod_class = { - .name = "mmc", - .sysc = &omap54xx_mmc_sysc, -}; - -/* mmc1 */ -static struct omap_hwmod_opt_clk mmc1_opt_clks[] = { - { .role = "32khz_clk", .clk = "mmc1_32khz_clk" }, -}; - -/* mmc1 dev_attr */ -static struct omap_hsmmc_dev_attr mmc1_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; - -static struct omap_hwmod omap54xx_mmc1_hwmod = { - .name = "mmc1", - .class = &omap54xx_mmc_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "mmc1_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INIT_MMC1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INIT_MMC1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mmc1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mmc1_opt_clks), - .dev_attr = &mmc1_dev_attr, -}; - -/* mmc2 */ -static struct omap_hwmod omap54xx_mmc2_hwmod = { - .name = "mmc2", - .class = &omap54xx_mmc_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "mmc2_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INIT_MMC2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INIT_MMC2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mmc3 */ -static struct omap_hwmod omap54xx_mmc3_hwmod = { - .name = "mmc3", - .class = &omap54xx_mmc_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MMC3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MMC3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mmc4 */ -static struct omap_hwmod omap54xx_mmc4_hwmod = { - .name = "mmc4", - .class = &omap54xx_mmc_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MMC4_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MMC4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mmc5 */ -static struct omap_hwmod omap54xx_mmc5_hwmod = { - .name = "mmc5", - .class = &omap54xx_mmc_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MMC5_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MMC5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'mmu' class * The memory management unit performs virtual to physical address translation * for its requestors. @@ -1658,124 +1241,6 @@ static struct omap_hwmod omap54xx_timer11_hwmod = { }; /* - * 'uart' class - * universal asynchronous receiver/transmitter (uart) - */ - -static struct omap_hwmod_class_sysconfig omap54xx_uart_sysc = { - .rev_offs = 0x0050, - .sysc_offs = 0x0054, - .syss_offs = 0x0058, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_uart_hwmod_class = { - .name = "uart", - .sysc = &omap54xx_uart_sysc, -}; - -/* uart1 */ -static struct omap_hwmod omap54xx_uart1_hwmod = { - .name = "uart1", - .class = &omap54xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_UART1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_UART1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart2 */ -static struct omap_hwmod omap54xx_uart2_hwmod = { - .name = "uart2", - .class = &omap54xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_UART2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_UART2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart3 */ -static struct omap_hwmod omap54xx_uart3_hwmod = { - .name = "uart3", - .class = &omap54xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_UART3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_UART3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart4 */ -static struct omap_hwmod omap54xx_uart4_hwmod = { - .name = "uart4", - .class = &omap54xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_UART4_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_UART4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart5 */ -static struct omap_hwmod omap54xx_uart5_hwmod = { - .name = "uart5", - .class = &omap54xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_UART5_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_UART5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart6 */ -static struct omap_hwmod omap54xx_uart6_hwmod = { - .name = "uart6", - .class = &omap54xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_UART6_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_UART6_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'usb_host_hs' class * high-speed multi-port usb host controller */ @@ -2274,110 +1739,6 @@ static struct omap_hwmod_ocp_if omap54xx_mpu__emif2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> gpio1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_wkup__gpio1 = { - .master = &omap54xx_l4_wkup_hwmod, - .slave = &omap54xx_gpio1_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio2 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio3 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio3_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio4 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio4 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio4_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio5 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio5 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio5_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio6 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio6 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio6_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio7 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio7 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio7_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio8 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio8 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio8_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c1 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_i2c1_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c2 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_i2c2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c3 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_i2c3_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c4 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c4 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_i2c4_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c5 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c5 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_i2c5_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_wkup -> kbd */ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__kbd = { .master = &omap54xx_l4_wkup_hwmod, @@ -2458,46 +1819,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi4 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per -> mmc1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc1 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mmc1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc2 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mmc2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc3 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mmc3_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc4 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc4 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mmc4_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc5 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc5 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mmc5_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> mpu */ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { .master = &omap54xx_l4_cfg_hwmod, @@ -2610,54 +1931,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_per__timer11 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per -> uart1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__uart1 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_uart1_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__uart2 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_uart2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__uart3 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_uart3_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart4 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__uart4 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_uart4_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart5 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__uart5 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_uart5_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart6 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__uart6 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_uart6_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> usb_host_hs */ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = { .master = &omap54xx_l4_cfg_hwmod, @@ -2719,19 +1992,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l3_main_2__dss_rfbi, &omap54xx_mpu__emif1, &omap54xx_mpu__emif2, - &omap54xx_l4_wkup__gpio1, - &omap54xx_l4_per__gpio2, - &omap54xx_l4_per__gpio3, - &omap54xx_l4_per__gpio4, - &omap54xx_l4_per__gpio5, - &omap54xx_l4_per__gpio6, - &omap54xx_l4_per__gpio7, - &omap54xx_l4_per__gpio8, - &omap54xx_l4_per__i2c1, - &omap54xx_l4_per__i2c2, - &omap54xx_l4_per__i2c3, - &omap54xx_l4_per__i2c4, - &omap54xx_l4_per__i2c5, &omap54xx_l3_main_2__mmu_ipu, &omap54xx_l4_wkup__kbd, &omap54xx_l4_cfg__mailbox, @@ -2743,11 +2003,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_per__mcspi2, &omap54xx_l4_per__mcspi3, &omap54xx_l4_per__mcspi4, - &omap54xx_l4_per__mmc1, - &omap54xx_l4_per__mmc2, - &omap54xx_l4_per__mmc3, - &omap54xx_l4_per__mmc4, - &omap54xx_l4_per__mmc5, &omap54xx_l4_cfg__mpu, &omap54xx_l4_cfg__spinlock, &omap54xx_l4_cfg__ocp2scp1, @@ -2762,12 +2017,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_per__timer9, &omap54xx_l4_per__timer10, &omap54xx_l4_per__timer11, - &omap54xx_l4_per__uart1, - &omap54xx_l4_per__uart2, - &omap54xx_l4_per__uart3, - &omap54xx_l4_per__uart4, - &omap54xx_l4_per__uart5, - &omap54xx_l4_per__uart6, &omap54xx_l4_cfg__usb_host_hs, &omap54xx_l4_cfg__usb_tll_hs, &omap54xx_l4_cfg__usb_otg_ss, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index e6c7061a8e73..4a5b4aee6615 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hardware modules present on the DRA7xx chips * @@ -11,16 +12,10 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/io.h> -#include <linux/platform_data/hsmmc-omap.h> #include <linux/power/smartreflex.h> -#include <linux/platform_data/i2c-omap.h> #include <linux/omap-dma.h> @@ -29,7 +24,6 @@ #include "cm1_7xx.h" #include "cm2_7xx.h" #include "prm7xx.h" -#include "i2c.h" #include "wd_timer.h" #include "soc.h" @@ -693,7 +687,6 @@ static struct omap_hwmod_class_sysconfig dra7xx_aes_sysc = { static struct omap_hwmod_class dra7xx_aes_hwmod_class = { .name = "aes", .sysc = &dra7xx_aes_sysc, - .rev = 2, }; /* AES1 */ @@ -737,7 +730,6 @@ static struct omap_hwmod_class_sysconfig dra7xx_sha0_sysc = { static struct omap_hwmod_class dra7xx_sha0_hwmod_class = { .name = "sham", .sysc = &dra7xx_sha0_sysc, - .rev = 2, }; struct omap_hwmod dra7xx_sha0_hwmod = { @@ -792,205 +784,6 @@ static struct omap_hwmod dra7xx_elm_hwmod = { }; /* - * 'gpio' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_gpio_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0114, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_gpio_hwmod_class = { - .name = "gpio", - .sysc = &dra7xx_gpio_sysc, - .rev = 2, -}; - -/* gpio1 */ -static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { - { .role = "dbclk", .clk = "gpio1_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio1_hwmod = { - .name = "gpio1", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "wkupaon_iclk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_WKUPAON_GPIO1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_WKUPAON_GPIO1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), -}; - -/* gpio2 */ -static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { - { .role = "dbclk", .clk = "gpio2_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio2_hwmod = { - .name = "gpio2", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), -}; - -/* gpio3 */ -static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { - { .role = "dbclk", .clk = "gpio3_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio3_hwmod = { - .name = "gpio3", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO3_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), -}; - -/* gpio4 */ -static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { - { .role = "dbclk", .clk = "gpio4_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio4_hwmod = { - .name = "gpio4", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO4_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio4_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), -}; - -/* gpio5 */ -static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { - { .role = "dbclk", .clk = "gpio5_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio5_hwmod = { - .name = "gpio5", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO5_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio5_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), -}; - -/* gpio6 */ -static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { - { .role = "dbclk", .clk = "gpio6_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio6_hwmod = { - .name = "gpio6", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO6_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO6_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio6_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), -}; - -/* gpio7 */ -static struct omap_hwmod_opt_clk gpio7_opt_clks[] = { - { .role = "dbclk", .clk = "gpio7_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio7_hwmod = { - .name = "gpio7", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO7_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO7_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio7_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio7_opt_clks), -}; - -/* gpio8 */ -static struct omap_hwmod_opt_clk gpio8_opt_clks[] = { - { .role = "dbclk", .clk = "gpio8_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio8_hwmod = { - .name = "gpio8", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO8_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO8_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio8_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio8_opt_clks), -}; - -/* * 'gpmc' class * */ @@ -1065,110 +858,6 @@ static struct omap_hwmod dra7xx_hdq1w_hwmod = { }; /* - * 'i2c' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_i2c_sysc = { - .rev_offs = 0, - .sysc_offs = 0x0010, - .syss_offs = 0x0090, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_i2c_hwmod_class = { - .name = "i2c", - .sysc = &dra7xx_i2c_sysc, - .reset = &omap_i2c_reset, - .rev = OMAP_I2C_IP_VERSION_2, -}; - -/* i2c1 */ -static struct omap_hwmod dra7xx_i2c1_hwmod = { - .name = "i2c1", - .class = &dra7xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_I2C1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_I2C1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c2 */ -static struct omap_hwmod dra7xx_i2c2_hwmod = { - .name = "i2c2", - .class = &dra7xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_I2C2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_I2C2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c3 */ -static struct omap_hwmod dra7xx_i2c3_hwmod = { - .name = "i2c3", - .class = &dra7xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_I2C3_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_I2C3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c4 */ -static struct omap_hwmod dra7xx_i2c4_hwmod = { - .name = "i2c4", - .class = &dra7xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_I2C4_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_I2C4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c5 */ -static struct omap_hwmod dra7xx_i2c5_hwmod = { - .name = "i2c5", - .class = &dra7xx_i2c_hwmod_class, - .clkdm_name = "ipu_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_IPU_I2C5_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_IPU_I2C5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'mailbox' class * */ @@ -1632,118 +1321,6 @@ static struct omap_hwmod dra7xx_mcasp8_hwmod = { }; /* - * 'mmc' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_mmc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_mmc_hwmod_class = { - .name = "mmc", - .sysc = &dra7xx_mmc_sysc, -}; - -/* mmc1 */ -static struct omap_hwmod_opt_clk mmc1_opt_clks[] = { - { .role = "clk32k", .clk = "mmc1_clk32k" }, -}; - -/* mmc1 dev_attr */ -static struct omap_hsmmc_dev_attr mmc1_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; - -static struct omap_hwmod dra7xx_mmc1_hwmod = { - .name = "mmc1", - .class = &dra7xx_mmc_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "mmc1_fclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_MMC1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_MMC1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mmc1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mmc1_opt_clks), - .dev_attr = &mmc1_dev_attr, -}; - -/* mmc2 */ -static struct omap_hwmod_opt_clk mmc2_opt_clks[] = { - { .role = "clk32k", .clk = "mmc2_clk32k" }, -}; - -static struct omap_hwmod dra7xx_mmc2_hwmod = { - .name = "mmc2", - .class = &dra7xx_mmc_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "mmc2_fclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_MMC2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_MMC2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mmc2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mmc2_opt_clks), -}; - -/* mmc3 */ -static struct omap_hwmod_opt_clk mmc3_opt_clks[] = { - { .role = "clk32k", .clk = "mmc3_clk32k" }, -}; - -static struct omap_hwmod dra7xx_mmc3_hwmod = { - .name = "mmc3", - .class = &dra7xx_mmc_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "mmc3_gfclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_MMC3_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_MMC3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mmc3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mmc3_opt_clks), -}; - -/* mmc4 */ -static struct omap_hwmod_opt_clk mmc4_opt_clks[] = { - { .role = "clk32k", .clk = "mmc4_clk32k" }, -}; - -static struct omap_hwmod dra7xx_mmc4_hwmod = { - .name = "mmc4", - .class = &dra7xx_mmc_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "mmc4_gfclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_MMC4_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_MMC4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mmc4_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mmc4_opt_clks), -}; - -/* * 'mpu' class * */ @@ -1832,7 +1409,7 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = { * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset * lines after asserting them. */ -static int dra7xx_pciess_reset(struct omap_hwmod *oh) +int dra7xx_pciess_reset(struct omap_hwmod *oh) { int i; @@ -2019,7 +1596,6 @@ static struct omap_hwmod_class_sysconfig dra7xx_smartreflex_sysc = { static struct omap_hwmod_class dra7xx_smartreflex_hwmod_class = { .name = "smartreflex", .sysc = &dra7xx_smartreflex_sysc, - .rev = 2, }; /* smartreflex_core */ @@ -2375,188 +1951,6 @@ static struct omap_hwmod dra7xx_timer16_hwmod = { }, }; -/* - * 'uart' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_uart_sysc = { - .rev_offs = 0x0050, - .sysc_offs = 0x0054, - .syss_offs = 0x0058, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_uart_hwmod_class = { - .name = "uart", - .sysc = &dra7xx_uart_sysc, -}; - -/* uart1 */ -static struct omap_hwmod dra7xx_uart1_hwmod = { - .name = "uart1", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "uart1_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP2UART1_FLAGS, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_UART1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_UART1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart2 */ -static struct omap_hwmod dra7xx_uart2_hwmod = { - .name = "uart2", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "uart2_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_UART2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_UART2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart3 */ -static struct omap_hwmod dra7xx_uart3_hwmod = { - .name = "uart3", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "uart3_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART3_FLAGS, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_UART3_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_UART3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart4 */ -static struct omap_hwmod dra7xx_uart4_hwmod = { - .name = "uart4", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "uart4_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART4_FLAGS, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_UART4_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_UART4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart5 */ -static struct omap_hwmod dra7xx_uart5_hwmod = { - .name = "uart5", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "uart5_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_UART5_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_UART5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart6 */ -static struct omap_hwmod dra7xx_uart6_hwmod = { - .name = "uart6", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "ipu_clkdm", - .main_clk = "uart6_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_IPU_UART6_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_IPU_UART6_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart7 */ -static struct omap_hwmod dra7xx_uart7_hwmod = { - .name = "uart7", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per2_clkdm", - .main_clk = "uart7_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER2_UART7_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER2_UART7_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart8 */ -static struct omap_hwmod dra7xx_uart8_hwmod = { - .name = "uart8", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per2_clkdm", - .main_clk = "uart8_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER2_UART8_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER2_UART8_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart9 */ -static struct omap_hwmod dra7xx_uart9_hwmod = { - .name = "uart9", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per2_clkdm", - .main_clk = "uart9_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER2_UART9_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER2_UART9_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart10 */ -static struct omap_hwmod dra7xx_uart10_hwmod = { - .name = "uart10", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .main_clk = "uart10_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_WKUPAON_UART10_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_WKUPAON_UART10_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* DES (the 'P' (public) device) */ static struct omap_hwmod_class_sysconfig dra7xx_des_sysc = { .rev_offs = 0x0030, @@ -3113,70 +2507,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> gpio1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_wkup__gpio1 = { - .master = &dra7xx_l4_wkup_hwmod, - .slave = &dra7xx_gpio1_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio2 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio3 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio3 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio4 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio4 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio4_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio5 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio5 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio5_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio6 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio6 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio6_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio7 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio7 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio7_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio8 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio8 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio8_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> gpmc */ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = { .master = &dra7xx_l3_main_1_hwmod, @@ -3193,46 +2523,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__hdq1w = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per1 -> i2c1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c1 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_i2c1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> i2c2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c2 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_i2c2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> i2c3 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c3 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_i2c3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> i2c4 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c4 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_i2c4_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> i2c5 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_i2c5_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> mailbox1 */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = { .master = &dra7xx_l4_cfg_hwmod, @@ -3369,38 +2659,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi4 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per1 -> mmc1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc1 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_mmc1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> mmc2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc2 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_mmc2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> mmc3 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc3 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_mmc3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> mmc4 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc4 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_mmc4_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> mpu */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = { .master = &dra7xx_l4_cfg_hwmod, @@ -3633,62 +2891,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer16 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per1 -> uart1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart1 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_uart1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> uart2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart2 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_uart2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> uart3 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart3 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_uart3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> uart4 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart4 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_uart4_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> uart5 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart5 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_uart5_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> uart6 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart6 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_uart6_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per2 -> uart7 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart7 = { - .master = &dra7xx_l4_per2_hwmod, - .slave = &dra7xx_uart7_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_per1 -> des */ static struct omap_hwmod_ocp_if dra7xx_l4_per1__des = { .master = &dra7xx_l4_per1_hwmod, @@ -3697,30 +2899,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__des = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per2 -> uart8 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart8 = { - .master = &dra7xx_l4_per2_hwmod, - .slave = &dra7xx_uart8_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per2 -> uart9 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart9 = { - .master = &dra7xx_l4_per2_hwmod, - .slave = &dra7xx_uart9_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> uart10 */ -static struct omap_hwmod_ocp_if dra7xx_l4_wkup__uart10 = { - .master = &dra7xx_l4_wkup_hwmod, - .slave = &dra7xx_uart10_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_per1 -> rng */ static struct omap_hwmod_ocp_if dra7xx_l4_per1__rng = { .master = &dra7xx_l4_per1_hwmod, @@ -3866,21 +3044,8 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__aes2, &dra7xx_l3_main_1__sha0, &dra7xx_l4_per1__elm, - &dra7xx_l4_wkup__gpio1, - &dra7xx_l4_per1__gpio2, - &dra7xx_l4_per1__gpio3, - &dra7xx_l4_per1__gpio4, - &dra7xx_l4_per1__gpio5, - &dra7xx_l4_per1__gpio6, - &dra7xx_l4_per1__gpio7, - &dra7xx_l4_per1__gpio8, &dra7xx_l3_main_1__gpmc, &dra7xx_l4_per1__hdq1w, - &dra7xx_l4_per1__i2c1, - &dra7xx_l4_per1__i2c2, - &dra7xx_l4_per1__i2c3, - &dra7xx_l4_per1__i2c4, - &dra7xx_l4_per1__i2c5, &dra7xx_l4_cfg__mailbox1, &dra7xx_l4_per3__mailbox2, &dra7xx_l4_per3__mailbox3, @@ -3898,10 +3063,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per1__mcspi2, &dra7xx_l4_per1__mcspi3, &dra7xx_l4_per1__mcspi4, - &dra7xx_l4_per1__mmc1, - &dra7xx_l4_per1__mmc2, - &dra7xx_l4_per1__mmc3, - &dra7xx_l4_per1__mmc4, &dra7xx_l4_cfg__mpu, &dra7xx_l4_cfg__ocp2scp1, &dra7xx_l4_cfg__ocp2scp3, @@ -3929,16 +3090,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per3__timer14, &dra7xx_l4_per3__timer15, &dra7xx_l4_per3__timer16, - &dra7xx_l4_per1__uart1, - &dra7xx_l4_per1__uart2, - &dra7xx_l4_per1__uart3, - &dra7xx_l4_per1__uart4, - &dra7xx_l4_per1__uart5, - &dra7xx_l4_per1__uart6, - &dra7xx_l4_per2__uart7, - &dra7xx_l4_per2__uart8, - &dra7xx_l4_per2__uart9, - &dra7xx_l4_wkup__uart10, &dra7xx_l4_per1__des, &dra7xx_l4_per3__usb_otg_ss1, &dra7xx_l4_per3__usb_otg_ss2, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index 8e44e2728620..83230d9ce5ed 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -432,6 +432,13 @@ static struct omap_hwmod dm81xx_i2c2_hwmod = { .class = &i2c_class, }; +static struct omap_hwmod_ocp_if dm81xx_l4_ls__i2c2 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_i2c2_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_class_sysconfig dm81xx_elm_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, @@ -443,13 +450,6 @@ static struct omap_hwmod_class_sysconfig dm81xx_elm_sysc = { .sysc_fields = &omap_hwmod_sysc_type1, }; -static struct omap_hwmod_ocp_if dm81xx_l4_ls__i2c2 = { - .master = &dm81xx_l4_ls_hwmod, - .slave = &dm81xx_i2c2_hwmod, - .clk = "sysclk6_ck", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_class dm81xx_elm_hwmod_class = { .name = "elm", .sysc = &dm81xx_elm_sysc, @@ -484,7 +484,6 @@ static struct omap_hwmod_class_sysconfig dm81xx_gpio_sysc = { static struct omap_hwmod_class dm81xx_gpio_hwmod_class = { .name = "gpio", .sysc = &dm81xx_gpio_sysc, - .rev = 2, }; static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { @@ -539,6 +538,58 @@ static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio2 = { .user = OCP_USER_MPU, }; +static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { + { .role = "dbclk", .clk = "sysclk18_ck" }, +}; + +static struct omap_hwmod dm81xx_gpio3_hwmod = { + .name = "gpio3", + .clkdm_name = "alwon_l3s_clkdm", + .class = &dm81xx_gpio_hwmod_class, + .main_clk = "sysclk6_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_ALWON_GPIO_1_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = gpio3_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), +}; + +static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio3 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_gpio3_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { + { .role = "dbclk", .clk = "sysclk18_ck" }, +}; + +static struct omap_hwmod dm81xx_gpio4_hwmod = { + .name = "gpio4", + .clkdm_name = "alwon_l3s_clkdm", + .class = &dm81xx_gpio_hwmod_class, + .main_clk = "sysclk6_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_ALWON_GPIO_1_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = gpio4_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), +}; + +static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio4 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_gpio4_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_class_sysconfig dm81xx_gpmc_sysc = { .rev_offs = 0x0, .sysc_offs = 0x10, @@ -1133,6 +1184,45 @@ static struct omap_hwmod dm81xx_mcspi1_hwmod = { .class = &dm816x_mcspi_class, }; +static struct omap_hwmod dm81xx_mcspi2_hwmod = { + .name = "mcspi2", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk10_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_ALWON_SPI_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &dm816x_mcspi_class, +}; + +static struct omap_hwmod dm81xx_mcspi3_hwmod = { + .name = "mcspi3", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk10_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_ALWON_SPI_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &dm816x_mcspi_class, +}; + +static struct omap_hwmod dm81xx_mcspi4_hwmod = { + .name = "mcspi4", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk10_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_ALWON_SPI_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &dm816x_mcspi_class, +}; + static struct omap_hwmod_ocp_if dm81xx_l4_ls__mcspi1 = { .master = &dm81xx_l4_ls_hwmod, .slave = &dm81xx_mcspi1_hwmod, @@ -1140,6 +1230,27 @@ static struct omap_hwmod_ocp_if dm81xx_l4_ls__mcspi1 = { .user = OCP_USER_MPU, }; +static struct omap_hwmod_ocp_if dm81xx_l4_ls__mcspi2 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_mcspi2_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if dm81xx_l4_ls__mcspi3 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_mcspi3_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if dm81xx_l4_ls__mcspi4 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_mcspi4_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_class_sysconfig dm81xx_mailbox_sysc = { .rev_offs = 0x000, .sysc_offs = 0x010, @@ -1378,8 +1489,13 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = { &dm81xx_l4_ls__i2c2, &dm81xx_l4_ls__gpio1, &dm81xx_l4_ls__gpio2, + &dm81xx_l4_ls__gpio3, + &dm81xx_l4_ls__gpio4, &dm81xx_l4_ls__elm, &dm81xx_l4_ls__mcspi1, + &dm81xx_l4_ls__mcspi2, + &dm81xx_l4_ls__mcspi3, + &dm81xx_l4_ls__mcspi4, &dm814x_l4_ls__mmc1, &dm814x_l4_ls__mmc2, &ti81xx_l4_ls__rtc, diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index 77c0b7618ea2..246f1e5da99f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap_hwmod common data structures * @@ -8,10 +9,6 @@ * Copyright (C) 2010 Nokia Corporation * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This data/structures are to be used while defining OMAP on-chip module * data and their integration with other OMAP modules and Linux. */ diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 56dbaca9a728..ca56563e3fec 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * omap_hwmod_common_data.h - OMAP hwmod common macros and declarations * @@ -5,10 +6,6 @@ * Copyright (C) 2010-2012 Texas Instruments, Inc. * Paul Walmsley * Benoît Cousson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H #define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H diff --git a/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c index f21664da25a2..39ca491cb7db 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * omap_hwmod_common_ipblock_data.c - common IP block data for OMAP2+ * * Copyright (C) 2011 Nokia Corporation * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 8e903564ede2..d2925e8b2eff 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -1,24 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * This file configures the internal USB PHY in OMAP4430. Used * with TWL6030 transceiver and MUSB on OMAP4430. * * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * * Author: Hema HK <hemahk@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 295124b248ae..6787f1e72c6b 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /** * OMAP and TWL PMIC specific initializations. * @@ -7,10 +8,6 @@ * Nishanth Menon * Copyright (C) 2009 Nokia Corporation * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/err.h> diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 8a5b6ed4ec36..b0f8c9a70c68 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Legacy platform_data quirks * * Copyright (C) 2013 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/clk.h> #include <linux/davinci_emac.h> @@ -330,7 +327,6 @@ static struct fixed_voltage_config pandora_vwlan = { .supply_name = "vwlan", .microvolts = 1800000, /* 1.8V */ .startup_delay = 50000, /* 50ms */ - .enable_high = 1, .init_data = &pandora_vmmc3, }; diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 5a8839203958..fe6ec9b580b9 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP Power Management debug routines * @@ -13,10 +14,6 @@ * Jouni Hogander * * Based on pm.c for omap2 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index ca03af8fe43f..1fde1bf53fb6 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * pm.c - Common OMAP2+ power management-related code * * Copyright (C) 2010 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index c73776b82348..8a55b69bca63 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2/3 Power Management Routines * * Copyright (C) 2008 Nokia Corporation * Jouni Hogander - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_PM_H #define __ARCH_ARM_MACH_OMAP2_PM_H diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 1298b53ac263..1581b6a6a416 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2 Power Management Routines * @@ -12,10 +13,6 @@ * Igor Stoppa <igor.stoppa@nokia.com> * * Based on pm.c for omap1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/cpu_pm.h> diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c index 724cf5774a6c..f11442ed3eff 100644 --- a/arch/arm/mach-omap2/pm33xx-core.c +++ b/arch/arm/mach-omap2/pm33xx-core.c @@ -10,6 +10,12 @@ #include <asm/suspend.h> #include <linux/errno.h> #include <linux/platform_data/pm33xx.h> +#include <linux/clk.h> +#include <linux/platform_data/gpio-omap.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/wkup_m3_ipc.h> +#include <linux/of.h> +#include <linux/rtc.h> #include "cm33xx.h" #include "common.h" @@ -38,6 +44,29 @@ static int am43xx_map_scu(void) return 0; } +static int am33xx_check_off_mode_enable(void) +{ + if (enable_off_mode) + pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n"); + + /* off mode not supported on am335x so return 0 always */ + return 0; +} + +static int am43xx_check_off_mode_enable(void) +{ + /* + * Check for am437x-gp-evm which has the right Hardware design to + * support this mode reliably. + */ + if (of_machine_is_compatible("ti,am437x-gp-evm") && enable_off_mode) + return enable_off_mode; + else if (enable_off_mode) + pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n"); + + return 0; +} + static int amx3_common_init(void) { gfx_pwrdm = pwrdm_lookup("gfx_pwrdm"); @@ -51,10 +80,12 @@ static int amx3_common_init(void) /* CEFUSE domain can be turned off post bootup */ cefuse_pwrdm = pwrdm_lookup("cefuse_pwrdm"); - if (cefuse_pwrdm) - omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF); - else + if (!cefuse_pwrdm) pr_err("PM: Failed to get cefuse_pwrdm\n"); + else if (omap_type() != OMAP2_DEVICE_TYPE_GP) + pr_info("PM: Leaving EFUSE power domain active\n"); + else + omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF); return 0; } @@ -139,7 +170,9 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long), scu_power_mode(scu_base, SCU_PM_POWEROFF); ret = cpu_suspend(args, fn); scu_power_mode(scu_base, SCU_PM_NORMAL); - amx3_post_suspend_common(); + + if (!am43xx_check_off_mode_enable()) + amx3_post_suspend_common(); return ret; } @@ -161,10 +194,48 @@ void __iomem *am43xx_get_rtc_base_addr(void) return omap_hwmod_get_mpu_rt_va(rtc_oh); } +static void am43xx_save_context(void) +{ +} + +static void am33xx_save_context(void) +{ + omap_intc_save_context(); +} + +static void am33xx_restore_context(void) +{ + omap_intc_restore_context(); +} + +static void am43xx_restore_context(void) +{ + /* + * HACK: restore dpll_per_clkdcoldo register contents, to avoid + * breaking suspend-resume + */ + writel_relaxed(0x0, AM33XX_L4_WK_IO_ADDRESS(0x44df2e14)); +} + +static void am43xx_prepare_rtc_suspend(void) +{ + omap_hwmod_enable(rtc_oh); +} + +static void am43xx_prepare_rtc_resume(void) +{ + omap_hwmod_idle(rtc_oh); +} + static struct am33xx_pm_platform_data am33xx_ops = { .init = am33xx_suspend_init, .soc_suspend = am33xx_suspend, .get_sram_addrs = amx3_get_sram_addrs, + .save_context = am33xx_save_context, + .restore_context = am33xx_restore_context, + .prepare_rtc_suspend = am43xx_prepare_rtc_suspend, + .prepare_rtc_resume = am43xx_prepare_rtc_resume, + .check_off_mode_enable = am33xx_check_off_mode_enable, .get_rtc_base_addr = am43xx_get_rtc_base_addr, }; @@ -172,6 +243,11 @@ static struct am33xx_pm_platform_data am43xx_ops = { .init = am43xx_suspend_init, .soc_suspend = am43xx_suspend, .get_sram_addrs = amx3_get_sram_addrs, + .save_context = am43xx_save_context, + .restore_context = am43xx_restore_context, + .prepare_rtc_suspend = am43xx_prepare_rtc_suspend, + .prepare_rtc_resume = am43xx_prepare_rtc_resume, + .check_off_mode_enable = am43xx_check_off_mode_enable, .get_rtc_base_addr = am43xx_get_rtc_base_addr, }; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 1a90050361f1..54254fc92c2e 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP3 Power Management Routines * @@ -12,10 +13,6 @@ * Richard Woodruff <r-woodruff2@ti.com> * * Based on pm.c for omap1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/cpu_pm.h> diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 78e1ace7d17d..485550af2506 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP4+ Power Management Routines * * Copyright (C) 2010-2013 Texas Instruments, Inc. * Rajendra Nayak <rnayak@ti.com> * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/pm.h> diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c index c40e5f009826..7e2c65fe774b 100644 --- a/arch/arm/mach-omap2/powerdomain-common.c +++ b/arch/arm/mach-omap2/powerdomain-common.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Common powerdomain framework functions * @@ -5,10 +6,6 @@ * Copyright (C) 2010 Nokia Corporation * * Derived from mach-omap2/powerdomain.c written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/errno.h> diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 1a0f69c0a376..1cbac76136d4 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP powerdomain control * @@ -7,10 +8,6 @@ * Written by Paul Walmsley * Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com> * State counting code by Tero Kristo <tero.kristo@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #undef DEBUG diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 9a907fb14044..907cc659f47a 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2/3/4 powerdomain control * @@ -6,10 +7,6 @@ * * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * XXX This should be moved to the mach-omap2/ directory at the earliest * opportunity. */ diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c index 7b946f1005b1..7374c8904346 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2/3 common powerdomain definitions * @@ -5,10 +6,6 @@ * Copyright (C) 2007-2011 Nokia Corporation * * Paul Walmsley, Jouni Högander - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h index fa311669d53d..d7cc26af5be7 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h +++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2/3 common powerdomains - prototypes * @@ -5,10 +6,6 @@ * Copyright (C) 2008-2010 Nokia Corporation * * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAINS2XXX_3XXX_DATA_H diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c index 578eef86fcf2..fa259adbdc61 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2XXX powerdomain definitions * @@ -5,10 +6,6 @@ * Copyright (C) 2007-2011 Nokia Corporation * * Paul Walmsley, Jouni Högander - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index eb27ae066292..3564fade67e4 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP3 powerdomain definitions * @@ -5,10 +6,6 @@ * Copyright (C) 2007-2011 Nokia Corporation * * Paul Walmsley, Jouni Högander - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/powerdomains43xx_data.c b/arch/arm/mach-omap2/powerdomains43xx_data.c index 95fee54c38ab..5255f7e92072 100644 --- a/arch/arm/mach-omap2/powerdomains43xx_data.c +++ b/arch/arm/mach-omap2/powerdomains43xx_data.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * AM43xx Power domains framework * * Copyright (C) 2013 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c index 704664c0e259..37fd1a567094 100644 --- a/arch/arm/mach-omap2/powerdomains44xx_data.c +++ b/arch/arm/mach-omap2/powerdomains44xx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP4 Power domains framework * @@ -13,10 +14,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/powerdomains54xx_data.c b/arch/arm/mach-omap2/powerdomains54xx_data.c index 60d7ed8ef8ca..5506da2ceaff 100644 --- a/arch/arm/mach-omap2/powerdomains54xx_data.c +++ b/arch/arm/mach-omap2/powerdomains54xx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP54XX Power domains framework * @@ -12,10 +13,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c index f50963916a21..921cb1b29cb4 100644 --- a/arch/arm/mach-omap2/powerdomains7xx_data.c +++ b/arch/arm/mach-omap2/powerdomains7xx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * DRA7xx Power domains framework * @@ -14,10 +15,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 0977da0dab76..48e804c93caf 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H #define __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H @@ -8,10 +9,6 @@ * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* Module offsets from both CM_BASE & PRM_BASE */ diff --git a/arch/arm/mach-omap2/prcm44xx.h b/arch/arm/mach-omap2/prcm44xx.h index 4fea2cfdf2c3..b1d4c89a4491 100644 --- a/arch/arm/mach-omap2/prcm44xx.h +++ b/arch/arm/mach-omap2/prcm44xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP4 PRCM definitions * @@ -6,10 +7,6 @@ * * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file contains macros and functions that are common to all of * the PRM/CM/PRCM blocks on the OMAP4 devices: PRM, CM1, CM2, * PRCM_MPU, SCRM diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c index 9c782f5c3f94..5add541e3b41 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.c +++ b/arch/arm/mach-omap2/prcm_mpu44xx.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP4 PRCM_MPU module functions * * Copyright (C) 2009 Nokia Corporation * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index ac9cb4550239..ff3484b04365 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP44xx PRCM MPU instance offset macros * @@ -14,10 +15,6 @@ * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX", * or "OMAP4430". */ diff --git a/arch/arm/mach-omap2/prcm_mpu54xx.h b/arch/arm/mach-omap2/prcm_mpu54xx.h index bc2ce3288315..6ef38829c064 100644 --- a/arch/arm/mach-omap2/prcm_mpu54xx.h +++ b/arch/arm/mach-omap2/prcm_mpu54xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP54xx PRCM MPU instance offset macros * @@ -12,10 +13,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU54XX_H diff --git a/arch/arm/mach-omap2/prcm_mpu7xx.h b/arch/arm/mach-omap2/prcm_mpu7xx.h index 9ebb5ce0878f..33d0013aa1d4 100644 --- a/arch/arm/mach-omap2/prcm_mpu7xx.h +++ b/arch/arm/mach-omap2/prcm_mpu7xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * DRA7xx PRCM MPU instance offset macros * @@ -13,10 +14,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU7XX_H diff --git a/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h b/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h index f565f7f73175..7c6377566f33 100644 --- a/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h +++ b/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP44xx and OMAP54xx PRCM MPU function prototypes * @@ -13,11 +14,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU_44XX_54XX_H diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h index 37fc905c9636..ff83801f6439 100644 --- a/arch/arm/mach-omap2/prm-regbits-24xx.h +++ b/arch/arm/mach-omap2/prm-regbits-24xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H #define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H @@ -8,10 +9,6 @@ * Copyright (C) 2007 Nokia Corporation * * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "prm2xxx.h" diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 661d753df584..4b94fd11a1ba 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP3430 Power/Reset Management register bits * @@ -5,10 +6,6 @@ * Copyright (C) 2007-2008 Nokia Corporation * * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H #define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h index e794828dee55..55d84d0d7156 100644 --- a/arch/arm/mach-omap2/prm-regbits-44xx.h +++ b/arch/arm/mach-omap2/prm-regbits-44xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP44xx Power Management register bits * @@ -13,10 +14,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index f0fb50871055..08df78810a5e 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2/3/4 Power/Reset Management (PRM) bitfield definitions * @@ -5,10 +6,6 @@ * Copyright (C) 2010 Nokia Corporation * * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_PRM_H #define __ARCH_ARM_MACH_OMAP2_PRM_H diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c index 752018ce129c..35a58f54b528 100644 --- a/arch/arm/mach-omap2/prm2xxx.c +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2xxx PRM module functions * @@ -6,10 +7,6 @@ * Benoît Cousson * Paul Walmsley * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h index 9008a9e55a1a..659b917348f8 100644 --- a/arch/arm/mach-omap2/prm2xxx.h +++ b/arch/arm/mach-omap2/prm2xxx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2xxx Power/Reset Management (PRM) register definitions * @@ -5,10 +6,6 @@ * Copyright (C) 2008-2010 Nokia Corporation * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * The PRM hardware modules on the OMAP2/3 are quite similar to each * other. The PRM on OMAP4 has a new register layout, and is handled * in a separate file. diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index cc3341f263cd..d983efac6f4f 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2/3 PRM module functions * @@ -5,10 +6,6 @@ * Copyright (C) 2010 Nokia Corporation * Benoît Cousson * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 6775e10883fb..3d803f7182b9 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP2xxx/3xxx-common Power/Reset Management (PRM) register definitions * @@ -5,10 +6,6 @@ * Copyright (C) 2008-2010 Nokia Corporation * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * The PRM hardware modules on the OMAP2/3 are quite similar to each * other. The PRM on OMAP4 has a new register layout, and is handled * in a separate file. diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 05858f966f7d..1b442b128569 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP3xxx PRM module functions * @@ -6,10 +7,6 @@ * Benoît Cousson * Paul Walmsley * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> @@ -433,7 +430,7 @@ static void omap3_prm_reconfigure_io_chain(void) * registers, and omap3xxx_prm_reconfigure_io_chain() must be called. * No return value. */ -static void __init omap3xxx_prm_enable_io_wakeup(void) +static void omap3xxx_prm_enable_io_wakeup(void) { if (prm_features & PRM_HAS_IO_WAKEUP) omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index 5f095eec339c..ed7c389aa5a7 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP3xxx Power/Reset Management (PRM) register definitions * @@ -5,10 +6,6 @@ * Copyright (C) 2008-2010 Nokia Corporation * Paul Walmsley * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * The PRM hardware modules on the OMAP2/3 are quite similar to each * other. The PRM on OMAP4 has a new register layout, and is handled * in a separate file. diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 38a1be6c3694..1d9346f2a4ae 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP4 PRM module functions * @@ -6,10 +7,6 @@ * Benoît Cousson * Paul Walmsley * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/cpu_pm.h> diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index efd6035d0871..1006d3c8c42e 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP44xx PRM instance offset macros * @@ -14,10 +15,6 @@ * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX", * or "OMAP4430". */ diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h index 3f139ebc8398..0915a109260d 100644 --- a/arch/arm/mach-omap2/prm44xx_54xx.h +++ b/arch/arm/mach-omap2/prm44xx_54xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP44xx and 54xx PRM common functions * @@ -13,11 +14,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H diff --git a/arch/arm/mach-omap2/prm54xx.h b/arch/arm/mach-omap2/prm54xx.h index 1eb22ff087dc..ee0f1cc92e3a 100644 --- a/arch/arm/mach-omap2/prm54xx.h +++ b/arch/arm/mach-omap2/prm54xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP54xx PRM instance offset macros * @@ -12,10 +13,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_PRM54XX_H diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h index 294deed956f3..cf99307d1b1f 100644 --- a/arch/arm/mach-omap2/prm7xx.h +++ b/arch/arm/mach-omap2/prm7xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * DRA7xx PRM instance offset macros * @@ -13,10 +14,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_PRM7XX_H diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 058a37e6d11c..65b2d82efa27 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -1,14 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2+ common Power & Reset Management (PRM) IP block functions * * Copyright (C) 2011 Texas Instruments, Inc. * Tero Kristo <t-kristo@ti.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * * For historical purposes, the API used to configure the PRM * interrupt handler refers to it as the "PRCM interrupt." The * underlying registers are located in the PRM on OMAP3/4. @@ -523,8 +519,10 @@ void omap_prm_reset_system(void) prm_ll_data->reset_system(); - while (1) + while (1) { cpu_relax(); + wfe(); + } } /** diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index 48b8127b4e99..fc086d8b9a04 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP4 PRM instance functions * * Copyright (C) 2009 Nokia Corporation * Copyright (C) 2011 Texas Instruments, Inc. * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h index 0c03d0731d7f..11365a08e833 100644 --- a/arch/arm/mach-omap2/prminst44xx.h +++ b/arch/arm/mach-omap2/prminst44xx.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP4 Power/Reset Management (PRM) function prototypes * * Copyright (C) 2010 Nokia Corporation * Copyright (C) 2011 Texas Instruments, Inc. * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H #define __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H diff --git a/arch/arm/mach-omap2/scrm44xx.h b/arch/arm/mach-omap2/scrm44xx.h index e897ac89a3fd..3f530b89e4c9 100644 --- a/arch/arm/mach-omap2/scrm44xx.h +++ b/arch/arm/mach-omap2/scrm44xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP44xx SCRM registers and bitfields * @@ -10,10 +11,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_SCRM_44XX_H diff --git a/arch/arm/mach-omap2/scrm54xx.h b/arch/arm/mach-omap2/scrm54xx.h index 57e86c8f8239..810d2b186337 100644 --- a/arch/arm/mach-omap2/scrm54xx.h +++ b/arch/arm/mach-omap2/scrm54xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP54XX SCRM registers and bitfields * @@ -10,10 +11,6 @@ * with the public linux-omap@vger.kernel.org mailing list and the * authors above to ensure that the autogeneration scripts are kept * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_SCRM_54XX_H diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index dae7e4804a48..2be4106d0dd6 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * SMS/SDRC (SDRAM controller) common code for OMAP2/3 * @@ -7,10 +8,6 @@ * Tony Lindgren <tony@atomide.com> * Paul Walmsley * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #undef DEBUG diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index f11500612983..5bdb832665c0 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H #define __ARCH_ARM_MACH_OMAP2_SDRC_H @@ -10,10 +11,6 @@ * Paul Walmsley * Tony Lindgren * Richard Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #undef DEBUG diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 339b0ecb7c32..529d46cfdea2 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap2/sdrc2xxx.c * @@ -9,10 +10,6 @@ * Tony Lindgren <tony@atomide.com> * Paul Walmsley * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index 1d3cb25c9629..84d8c43ad382 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mach-omap2/sleep.S * @@ -8,21 +9,6 @@ * (C) Copyright 2006 Nokia Corporation * Fixed idle loop sleep * Igor Stoppa <igor.stoppa@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA */ #include <linux/linkage.h> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 22daf4efed68..75ea4723ec0e 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * (C) Copyright 2007 * Texas Instruments @@ -6,21 +7,6 @@ * (C) Copyright 2004 * Texas Instruments, <www.ti.com> * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA */ #include <linux/linkage.h> diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S index 5b9343b58fc7..0c1031442571 100644 --- a/arch/arm/mach-omap2/sleep43xx.S +++ b/arch/arm/mach-omap2/sleep43xx.S @@ -368,6 +368,9 @@ wait_emif_enable1: mov r1, #AM43XX_EMIF_POWEROFF_DISABLE str r1, [r2, #0x0] + ldr r1, [r9, #EMIF_PM_RUN_HW_LEVELING] + blx r1 + #ifdef CONFIG_CACHE_L2X0 ldr r2, l2_cache_base ldr r0, [r2, #L2X0_CTRL] diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 0cae3b070208..934033ad847f 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP44xx sleep code. * * Copyright (C) 2011 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software,you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index d3a588cf3a6e..7c18420c9ff6 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Smart reflex Class 3 specific implementations * @@ -5,10 +6,6 @@ * * Copyright (C) 2010 Texas Instruments, Inc. * Thara Gopinath <thara@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/power/smartreflex.h> diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 050891e055a4..9e3dbb743e5c 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * OMAP cpu type detection * @@ -9,21 +10,6 @@ * * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> * Added DRA7xxx specific defines - Sricharan R<r.sricharan@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include "omap24xx.h" diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 0854ed9ff379..62df666c2bd0 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP3/OMAP4 smartreflex device file * @@ -12,10 +13,6 @@ * * Copyright (C) 2007 Texas Instruments, Inc. * Lesly A M <x0080970@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/power/smartreflex.h> @@ -119,7 +116,10 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) } sr_data->name = oh->name; - sr_data->ip_type = oh->class->rev; + if (cpu_is_omap343x()) + sr_data->ip_type = 1; + else + sr_data->ip_type = 2; sr_data->senn_mod = 0x1; sr_data->senp_mod = 0x1; diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c index 83d0e61f49e6..c98855f5594b 100644 --- a/arch/arm/mach-omap2/sram.c +++ b/arch/arm/mach-omap2/sram.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * * OMAP SRAM detection and management @@ -7,10 +8,6 @@ * * Copyright (C) 2009-2012 Texas Instruments * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h index 18dc884267fa..447bd3eed0fd 100644 --- a/arch/arm/mach-omap2/sram.h +++ b/arch/arm/mach-omap2/sram.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASSEMBLY__ diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 53a2537cd75a..92ef21ac2ac1 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mach-omap2/sram242x.S * @@ -7,21 +8,6 @@ * Texas Instruments, <www.ti.com> * Richard Woodruff <r-woodruff2@ti.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * * Richard Woodruff notes that any changes to this code must be carefully * audited and tested to ensure that they don't cause a TLB miss while * the SDRAM is inaccessible. Such a situation will crash the system diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index b3edd6f7f7db..faf03b7f08f5 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mach-omap2/sram243x.S * @@ -7,21 +8,6 @@ * Texas Instruments, <www.ti.com> * Richard Woodruff <r-woodruff2@ti.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * * Richard Woodruff notes that any changes to this code must be carefully * audited and tested to ensure that they don't cause a TLB miss while * the SDRAM is inaccessible. Such a situation will crash the system diff --git a/arch/arm/mach-omap2/ti81xx-restart.c b/arch/arm/mach-omap2/ti81xx-restart.c index 6c3ce7c46ddd..d6dc518b1dde 100644 --- a/arch/arm/mach-omap2/ti81xx-restart.c +++ b/arch/arm/mach-omap2/ti81xx-restart.c @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only #include <linux/kernel.h> #include <linux/init.h> #include <linux/reboot.h> diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index c2a6fbd7f8a9..a0c4c42e56b9 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap2/usb-tusb6010.c * * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/err.h> diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 89b83b7ff3ec..5bf088633b62 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP3/4 Voltage Controller (VC) structure and macro definitions * @@ -9,10 +10,6 @@ * Copyright (C) 2008, 2011 Nokia Corporation * Kalle Jokiniemi * Paul Walmsley - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_VC_H #define __ARCH_ARM_MACH_OMAP2_VC_H diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index 71d74c9172c1..227345081a87 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP3 Voltage Controller (VC) data * @@ -9,10 +10,6 @@ * Copyright (C) 2008, 2011 Nokia Corporation * Kalle Jokiniemi * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/io.h> #include <linux/err.h> diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index 2abd5fa8a697..0c70c0815fdc 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP4 Voltage Controller (VC) data * @@ -9,10 +10,6 @@ * Copyright (C) 2008, 2011 Nokia Corporation * Kalle Jokiniemi * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/io.h> #include <linux/err.h> diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index cd15dbd62671..0a0c771dbb0a 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP3/OMAP4 Voltage Management Routines * @@ -13,10 +14,6 @@ * * Copyright (C) 2010 Texas Instruments, Inc. * Thara Gopinath <thara@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/delay.h> diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index e64550321510..4a225f9559a5 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP Voltage Management Routines * @@ -5,10 +6,6 @@ * * Copyright (C) 2009 Texas Instruments, Inc. * Thara Gopinath <thara@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H diff --git a/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/arch/arm/mach-omap2/voltagedomains2xxx_data.c index 7a41349981e5..9bc116fe3ba9 100644 --- a/arch/arm/mach-omap2/voltagedomains2xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains2xxx_data.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP3 voltage domain data * * Copyright (C) 2011 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 307676d8c53c..e98a3f289c27 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP3 voltage domain data * @@ -9,10 +10,6 @@ * Copyright (C) 2008, 2011 Nokia Corporation * Kalle Jokiniemi * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/err.h> diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 9b1f245b57d6..5ea86f16f6e1 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP3/OMAP4 Voltage Management Routines * @@ -12,10 +13,6 @@ * * Copyright (C) 2010 Texas Instruments, Inc. * Thara Gopinath <thara@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/err.h> diff --git a/arch/arm/mach-omap2/voltagedomains54xx_data.c b/arch/arm/mach-omap2/voltagedomains54xx_data.c index af5ff6496441..aac274d6a93b 100644 --- a/arch/arm/mach-omap2/voltagedomains54xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains54xx_data.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP5 Voltage Management Routines * * Based on voltagedomains44xx_data.c * * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/err.h> diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 7e0829682bd0..4d7dd204e92f 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP3/4 Voltage Processor (VP) structure and macro definitions * @@ -9,10 +10,6 @@ * Copyright (C) 2008, 2011 Nokia Corporation * Kalle Jokiniemi * Paul Walmsley - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. */ #ifndef __ARCH_ARM_MACH_OMAP2_VP_H #define __ARCH_ARM_MACH_OMAP2_VP_H diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index b0590fe6ab01..9db9dd269ae3 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP3 Voltage Processor (VP) data * @@ -9,10 +10,6 @@ * Copyright (C) 2008, 2011 Nokia Corporation * Kalle Jokiniemi * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/io.h> diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index 2448bb9a8716..ec7104ec809e 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP3 Voltage Processor (VP) data * @@ -9,10 +10,6 @@ * Copyright (C) 2008, 2011 Nokia Corporation * Kalle Jokiniemi * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/io.h> diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index 0084b6c77cf1..d4ea56a5f75a 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * OMAP2+ MPU WD_TIMER-specific code * * Copyright (C) 2012 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/wd_timer.h b/arch/arm/mach-omap2/wd_timer.h index a78f81034a9f..fa44a07a5def 100644 --- a/arch/arm/mach-omap2/wd_timer.h +++ b/arch/arm/mach-omap2/wd_timer.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * OMAP2+ MPU WD_TIMER-specific function prototypes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 38c45a88c793..cf9cb3d2590e 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_ORION5X bool "Marvell Orion" depends on MMU && ARCH_MULTI_V5 diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c index 79202fd626df..b0f16d223adf 100644 --- a/arch/arm/mach-orion5x/board-mss2.c +++ b/arch/arm/mach-orion5x/board-mss2.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Maxtor Shared Storage II Board Setup * * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 83a7ec4c16d0..7bcb41137bbf 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/serial_8250.h> @@ -20,7 +21,7 @@ #include <linux/delay.h> #include <linux/clk-provider.h> #include <linux/cpu.h> -#include <net/dsa.h> +#include <linux/platform_data/dsa.h> #include <asm/page.h> #include <asm/setup.h> #include <asm/system_misc.h> diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index a3c1336d30c9..c65ab7db36ad 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -16,7 +16,7 @@ #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> -#include <net/dsa.h> +#include <linux/platform_data/dsa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index 252efe29bd1a..76b8138d9d79 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -17,7 +17,7 @@ #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> #include <linux/i2c.h> -#include <net/dsa.h> +#include <linux/platform_data/dsa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index f4f1dbe1d91d..5f388a1ed1e4 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -18,7 +18,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/ethtool.h> -#include <net/dsa.h> +#include <linux/platform_data/dsa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index deb5e29ac669..23a5521c6833 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Buffalo Terastation Pro II/Live Board Setup * * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 0c315515dd2d..bab8ba0e01ab 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * QNAP TS-109/TS-209 Board Setup * * Maintainer: Byron Bradley <byron.bbradley@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index a77613b14db5..6f60dc1dfa22 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * QNAP TS-409 Board Setup * @@ -5,11 +6,6 @@ * * Copyright (C) 2008 Sylver Bruneau <sylver.bruneau@gmail.com> * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. */ #include <linux/gpio.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c index 905d4f2dd0b8..099e6fdfa8e6 100644 --- a/arch/arm/mach-orion5x/tsx09-common.c +++ b/arch/arm/mach-orion5x/tsx09-common.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * QNAP TS-x09 Boards common functions * * Maintainers: Lennert Buytenhek <buytenh@marvell.com> * Byron Bradley <byron.bbradley@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index d162d4c7f85d..83589a28a491 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -15,7 +15,7 @@ #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> -#include <net/dsa.h> +#include <linux/platform_data/dsa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 9250bb2e429c..cea08d4a2597 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -18,7 +18,7 @@ #include <linux/leds.h> #include <linux/gpio_keys.h> #include <linux/input.h> -#include <net/dsa.h> +#include <linux/platform_data/dsa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig index e3610c5b309b..bee5f64c2e5f 100644 --- a/arch/arm/mach-oxnas/Kconfig +++ b/arch/arm/mach-oxnas/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_OXNAS bool "Oxford Semiconductor OXNAS Family SoCs" select ARCH_HAS_RESET_CONTROLLER diff --git a/arch/arm/mach-oxnas/Makefile b/arch/arm/mach-oxnas/Makefile index b625906a9970..0e78ecfe6c49 100644 --- a/arch/arm/mach-oxnas/Makefile +++ b/arch/arm/mach-oxnas/Makefile @@ -1,2 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-oxnas/headsmp.S b/arch/arm/mach-oxnas/headsmp.S index 25fd4f82ab3a..9c0f1479f33a 100644 --- a/arch/arm/mach-oxnas/headsmp.S +++ b/arch/arm/mach-oxnas/headsmp.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com> * Copyright (c) 2003 ARM Limited * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/mach-oxnas/hotplug.c b/arch/arm/mach-oxnas/hotplug.c deleted file mode 100644 index 854f29b8cba6..000000000000 --- a/arch/arm/mach-oxnas/hotplug.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/smp.h> - -#include <asm/cp15.h> -#include <asm/smp_plat.h> - -static inline void cpu_enter_lowpower(void) -{ - unsigned int v; - - asm volatile( - " mcr p15, 0, %1, c7, c5, 0\n" - " mcr p15, 0, %1, c7, c10, 4\n" - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, #0x20\n" - " mcr p15, 0, %0, c1, c0, 1\n" - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "r" (0), "Ir" (CR_C) - : "cc"); -} - -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, #0x20\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C) - : "cc"); -} - -static inline void platform_do_lowpower(unsigned int cpu, int *spurious) -{ - /* - * there is no power-control hardware on this platform, so all - * we can do is put the core into WFI; this is safe as the calling - * code will have already disabled interrupts - */ - for (;;) { - /* - * here's the WFI - */ - asm(".word 0xe320f003\n" - : - : - : "memory", "cc"); - - if (pen_release == cpu_logical_map(cpu)) { - /* - * OK, proper wakeup, we're done - */ - break; - } - - /* - * Getting here, means that we have come out of WFI without - * having been woken up - this shouldn't happen - * - * Just note it happening - when we're woken, we can report - * its occurrence. - */ - (*spurious)++; - } -} - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void ox820_cpu_die(unsigned int cpu) -{ - int spurious = 0; - - /* - * we're ready for shutdown now, so do it - */ - cpu_enter_lowpower(); - platform_do_lowpower(cpu, &spurious); - - /* - * bring this CPU back into the world of cache - * coherency, and then restore interrupts - */ - cpu_leave_lowpower(); - - if (spurious) - pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); -} diff --git a/arch/arm/mach-oxnas/platsmp.c b/arch/arm/mach-oxnas/platsmp.c index 442cc8a2f7dc..ab35275b7ee3 100644 --- a/arch/arm/mach-oxnas/platsmp.c +++ b/arch/arm/mach-oxnas/platsmp.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com> * Copyright (C) 2002 ARM Ltd. * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/io.h> #include <linux/delay.h> @@ -19,7 +16,6 @@ #include <asm/smp_scu.h> extern void ox820_secondary_startup(void); -extern void ox820_cpu_die(unsigned int cpu); static void __iomem *cpu_ctrl; static void __iomem *gic_cpu_ctrl; @@ -94,9 +90,6 @@ unmap_scu: static const struct smp_operations ox820_smp_ops __initconst = { .smp_prepare_cpus = ox820_smp_prepare_cpus, .smp_boot_secondary = ox820_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_die = ox820_cpu_die, -#endif }; CPU_METHOD_OF_DECLARE(ox820_smp, "oxsemi,ox820-smp", &ox820_smp_ops); diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig index 1c8f701526c9..b8eba18c0265 100644 --- a/arch/arm/mach-picoxcell/Kconfig +++ b/arch/arm/mach-picoxcell/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only config ARCH_PICOXCELL bool "Picochip PicoXcell" depends on ARCH_MULTI_V6 diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile index 8e39f80fce19..aef03938005c 100644 --- a/arch/arm/mach-picoxcell/Makefile +++ b/arch/arm/mach-picoxcell/Makefile @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-y := common.o diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c index 4e3d6d5c82cd..8e738266a66a 100644 --- a/arch/arm/mach-picoxcell/common.c +++ b/arch/arm/mach-picoxcell/common.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2011 Picochip Ltd., Jamie Iles * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * All enquiries to support@picochip.com */ #include <linux/delay.h> diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 7426211bddaf..6f66785fab01 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_SIRF bool "CSR SiRF" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index ffe05c27087e..e2d158e331e2 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -1,14 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Defines machines for CSR SiRFprimaII * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ #include <linux/init.h> #include <linux/kernel.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <linux/of.h> diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h index 6d77b622d168..3bab7e571ded 100644 --- a/arch/arm/mach-prima2/common.h +++ b/arch/arm/mach-prima2/common.h @@ -1,9 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * This file contains common function prototypes to avoid externs in the c files. * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ #ifndef __MACH_PRIMA2_COMMON_H__ @@ -15,6 +14,8 @@ #include <asm/mach/time.h> #include <asm/exception.h> +extern volatile int prima2_pen_release; + extern const struct smp_operations sirfsoc_smp_ops; extern void sirfsoc_secondary_startup(void); extern void sirfsoc_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-prima2/headsmp.S b/arch/arm/mach-prima2/headsmp.S index 209d9fc5c16c..88ea1243942a 100644 --- a/arch/arm/mach-prima2/headsmp.S +++ b/arch/arm/mach-prima2/headsmp.S @@ -1,9 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Entry of the second core for CSR Marco dual-core SMP SoCs * * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ #include <linux/linkage.h> @@ -34,4 +33,4 @@ ENDPROC(sirfsoc_secondary_startup) .align 1: .long . - .long pen_release + .long prima2_pen_release diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c index a728c78b996f..bc0d957e89ac 100644 --- a/arch/arm/mach-prima2/hotplug.c +++ b/arch/arm/mach-prima2/hotplug.c @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * CPU hotplug support for CSR Marco dual-core SMP SoCs * * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ #include <linux/kernel.h> @@ -11,6 +10,7 @@ #include <linux/smp.h> #include <asm/smp_plat.h> +#include "common.h" static inline void platform_do_lowpower(unsigned int cpu) { @@ -18,7 +18,7 @@ static inline void platform_do_lowpower(unsigned int cpu) for (;;) { __asm__ __volatile__("dsb\n\t" "wfi\n\t" : : : "memory"); - if (pen_release == cpu_logical_map(cpu)) { + if (prima2_pen_release == cpu_logical_map(cpu)) { /* * OK, proper wakeup, we're done */ diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index 75ef5d4be554..8f7bbb57fb20 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * plat smp support for CSR Marco dual-core SMP SoCs * * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ #include <linux/init.h> @@ -24,13 +23,16 @@ static void __iomem *clk_base; static DEFINE_SPINLOCK(boot_lock); +/* XXX prima2_pen_release is cargo culted code - DO NOT COPY XXX */ +volatile int prima2_pen_release = -1; + static void sirfsoc_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ - pen_release = -1; + prima2_pen_release = -1; smp_wmb(); /* @@ -80,13 +82,13 @@ static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) /* * The secondary processor is waiting to be released from * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. + * that it has been released by resetting prima2_pen_release. * - * Note that "pen_release" is the hardware CPU ID, whereas + * Note that "prima2_pen_release" is the hardware CPU ID, whereas * "cpu" is Linux's internal ID. */ - pen_release = cpu_logical_map(cpu); - sync_cache_w(&pen_release); + prima2_pen_release = cpu_logical_map(cpu); + sync_cache_w(&prima2_pen_release); /* * Send the secondary CPU SEV, thereby causing the boot monitor to read @@ -97,7 +99,7 @@ static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { smp_rmb(); - if (pen_release == -1) + if (prima2_pen_release == -1) break; udelay(10); @@ -109,7 +111,7 @@ static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) */ spin_unlock(&boot_lock); - return pen_release != -1 ? -ENOSYS : 0; + return prima2_pen_release != -1 ? -ENOSYS : 0; } const struct smp_operations sirfsoc_smp_ops __initconst = { diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index b0bcf1ff02dd..c24bc89f320b 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * power management entry for CSR SiRFprimaII * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-prima2/pm.h b/arch/arm/mach-prima2/pm.h index bae6d77e01ab..0aff6cb876be 100644 --- a/arch/arm/mach-prima2/pm.h +++ b/arch/arm/mach-prima2/pm.h @@ -1,9 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-prima2/pm.h * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ #ifndef _MACH_PRIMA2_PM_H_ diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index 7c251eb11d01..9d56606ac87f 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * reset controller for CSR SiRFprimaII * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c index d4852d24dc7d..97c0e333e3b9 100644 --- a/arch/arm/mach-prima2/rtciobrg.c +++ b/arch/arm/mach-prima2/rtciobrg.c @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * RTC I/O Bridge interfaces for CSR SiRFprimaII/atlas7 * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-prima2/sleep.S b/arch/arm/mach-prima2/sleep.S index 0745abc365fc..d9bbc5ca39ef 100644 --- a/arch/arm/mach-prima2/sleep.S +++ b/arch/arm/mach-prima2/sleep.S @@ -1,9 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * sleep mode for CSR SiRFprimaII * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index dc8e4f4b7ade..f60bc29aef68 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" @@ -454,24 +455,6 @@ config MACH_TREO680 Say Y here if you intend to run this kernel on Palm Treo 680 smartphone. -config MACH_RAUMFELD_RC - bool "Raumfeld Controller" - select CPU_PXA300 - select POWER_SUPPLY - select PXA3xx - -config MACH_RAUMFELD_CONNECTOR - bool "Raumfeld Connector" - select CPU_PXA300 - select POWER_SUPPLY - select PXA3xx - -config MACH_RAUMFELD_SPEAKER - bool "Raumfeld Speaker" - select CPU_PXA300 - select POWER_SUPPLY - select PXA3xx - config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_PARAM diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 0a8e9611052f..f70728930c4f 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -86,9 +86,6 @@ obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o -obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o -obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o -obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o obj-$(CONFIG_MACH_ZIPIT2) += z2.o obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o diff --git a/arch/arm/mach-pxa/Makefile.boot b/arch/arm/mach-pxa/Makefile.boot index 2c1ae92f2106..bb6e353ecf06 100644 --- a/arch/arm/mach-pxa/Makefile.boot +++ b/arch/arm/mach-pxa/Makefile.boot @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0xa0008000 diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 4bcbd3d55b36..26140249c784 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/balloon3.c * @@ -7,10 +8,6 @@ * Created: June, 2006 * Copyright: Toby Churchill Ltd * Derived from mainstone.c, by Nico Pitre - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/export.h> @@ -35,7 +32,7 @@ #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index 1c3cbfca9f40..7712327f56a8 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/capc7117.c * @@ -13,10 +14,6 @@ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za> * Hennie van der Merwe <hvdmerwe@tmtservices.co.za> * rework for upstream merge - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/irq.h> diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c index fa8e7dd4d898..ea1e85775759 100644 --- a/arch/arm/mach-pxa/cm-x255.c +++ b/arch/arm/mach-pxa/cm-x255.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/cm-x255.c * * Copyright (C) 2007, 2008 CompuLab, Ltd. * Mike Rapoport <mike@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/platform_device.h> @@ -98,7 +95,7 @@ static unsigned long cmx255_pin_config[] = { }; #if defined(CONFIG_SPI_PXA2XX) -static struct pxa2xx_spi_master pxa_ssp_master_info = { +static struct pxa2xx_spi_controller pxa_ssp_master_info = { .num_chipselect = 1, }; diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index f7081a50dc67..9baad11314f2 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/cm-x270.c * * Copyright (C) 2007, 2008 CompuLab, Ltd. * Mike Rapoport <mike@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/platform_device.h> @@ -313,7 +310,7 @@ static inline void cmx270_init_mmc(void) {} #endif #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static struct pxa2xx_spi_master cm_x270_spi_info = { +static struct pxa2xx_spi_controller cm_x270_spi_info = { .num_chipselect = 1, .enable_dma = 1, }; diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index 3221ae15bef7..f1c61c6b5610 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/cm-x2xx-pci.c * @@ -7,10 +8,6 @@ * * Copyright (C) 2007, 2008 Compulab, Ltd. * Mike Rapoport <mike@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index 7202022ee243..ff976d1217eb 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/cm-x2xx.c * * Copyright (C) 2008 CompuLab, Ltd. * Mike Rapoport <mike@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index b76b566280fa..425855f456f2 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/cm-x300.c * @@ -7,10 +8,6 @@ * * Mike Rapoport <mike@compulab.co.il> * Igor Grinberg <grinberg@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define pr_fmt(fmt) "%s: " fmt, __func__ diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 2ccdef5de138..b9c173ede891 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/colibri-evalboard.c * * Support for Toradex Colibri Evaluation Carrier Board * Daniel Mack <daniel@caiaq.de> * Marek Vasut <marek.vasut@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index d203dd30cdd0..dbad2f13706c 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/income.c * @@ -6,10 +7,6 @@ * Copyright (C) 2010 * Marek Vasut <marek.vasut@gmail.com> * Pavel Revak <palo@bielyvlk.sk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/bitops.h> diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index e68acdd0cdbb..2f2cd2ae4187 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/colibri-pxa270.c * * Support for Toradex PXA270 based Colibri module * Daniel Mack <daniel@caiaq.de> * Marek Vasut <marek.vasut@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> @@ -24,7 +21,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach-types.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <mach/audio.h> #include "colibri.h" diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 6a5558d95d4e..82052dfd96b6 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-pxa/colibri-pxa300.c * @@ -5,10 +6,6 @@ * * Daniel Mack <daniel@caiaq.de> * Matthias Meier <matthias.j.meier@gmx.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> @@ -18,7 +15,7 @@ #include <linux/interrupt.h> #include <asm/mach-types.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 17067a3039a8..eba917d69c0a 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-pxa/colibri-pxa320.c * @@ -5,10 +6,6 @@ * * Daniel Mack <daniel@caiaq.de> * Matthias Meier <matthias.j.meier@gmx.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> @@ -19,7 +16,7 @@ #include <linux/usb/gpio_vbus.h> #include <asm/mach-types.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index e31a591e949f..3cead80a2b37 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-pxa/colibri-pxa3xx.c * * Common functions for all Toradex PXA3xx modules * * Daniel Mack <daniel@caiaq.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> @@ -17,7 +14,7 @@ #include <linux/etherdevice.h> #include <asm/mach-types.h> #include <mach/hardware.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index c9732cace5e3..f2d73289230f 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for Sharp SL-C7xx PDAs * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky) @@ -5,11 +6,6 @@ * Copyright (c) 2004-2005 Richard Purdie * * Based on Sharp's 2.4 kernel patches/lubbock.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -530,7 +526,7 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { }; #if IS_ENABLED(CONFIG_SPI_PXA2XX) -static struct pxa2xx_spi_master corgi_spi_info = { +static struct pxa2xx_spi_controller corgi_spi_info = { .num_chipselect = 3, }; diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index c71c483f410e..092dcb9fced5 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Battery and Power Management code for the Sharp SL-C7xx * * Copyright (c) 2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/module.h> diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index e26e7e60a169..98fcdc6e2944 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for Cogent CSB726 * * Copyright (c) 2008 Dmitry Eremin-Solenikov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-pxa/csb726.h b/arch/arm/mach-pxa/csb726.h index f1f2a78cfd16..30d7cf926b84 100644 --- a/arch/arm/mach-pxa/csb726.h +++ b/arch/arm/mach-pxa/csb726.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Support for Cogent CSB726 * * Copyright (c) 2008 Dmitry Baryshkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef CSB726_H #define CSB726_H diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index a24783a03827..524d6093e0c7 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -1065,7 +1065,7 @@ struct platform_device pxa93x_device_gpio = { /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1. * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */ -void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info) +void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info) { struct platform_device *pd; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 32c1edeb3f14..d8681a331030 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for CompuLab EM-X270 platform * * Copyright (C) 2007, 2008 CompuLab, Ltd. * Author: Mike Rapoport <mike@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/irq.h> @@ -689,7 +686,7 @@ static inline void em_x270_init_lcd(void) {} #endif #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static struct pxa2xx_spi_master em_x270_spi_info = { +static struct pxa2xx_spi_controller em_x270_spi_info = { .num_chipselect = 1, }; @@ -703,7 +700,7 @@ static struct tdo24m_platform_data em_x270_tdo24m_pdata = { .model = TDO35S, }; -static struct pxa2xx_spi_master em_x270_spi_2_info = { +static struct pxa2xx_spi_controller em_x270_spi_2_info = { .num_chipselect = 1, .enable_dma = 1, }; @@ -976,7 +973,6 @@ static struct fixed_voltage_config camera_dummy_config = { .supply_name = "camera_vdd", .input_supply = "vcc cam", .microvolts = 2800000, - .enable_high = 0, .init_data = &camera_dummy_initdata, }; diff --git a/arch/arm/mach-pxa/eseries-irq.h b/arch/arm/mach-pxa/eseries-irq.h index de292b269c63..572d573ce66b 100644 --- a/arch/arm/mach-pxa/eseries-irq.h +++ b/arch/arm/mach-pxa/eseries-irq.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * eseries-irq.h * * Copyright (C) Ian Molton <spyro@f2s.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #define ANGELX_IRQ_BASE (IRQ_BOARD_START+8) diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 565965e9acc7..ec10851b63cf 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -1,14 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * ezx.c - Common code for the EZX platform. * * Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>, * 2007-2008 Daniel Ribeiro <drwyrm@gmail.com>, * 2007-2008 Stefan Schmidt <stefan@datenfreihafen.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -714,7 +710,6 @@ static struct regulator_init_data camera_regulator_initdata = { static struct fixed_voltage_config camera_regulator_config = { .supply_name = "camera_vdd", .microvolts = 2800000, - .enable_high = 0, .init_data = &camera_regulator_initdata, }; @@ -730,7 +725,7 @@ static struct gpiod_lookup_table camera_supply_gpiod_table = { .dev_id = "reg-fixed-voltage.1", .table = { GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN, - NULL, GPIO_ACTIVE_HIGH), + NULL, GPIO_ACTIVE_LOW), { }, }, }; diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index cb73a9723d0e..ab7cdffd7ea8 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/generic.c * @@ -7,10 +8,6 @@ * * Code common to all PXA machines. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Since this file should be linked before any other machine specific file, * the __initcall() here will be executed first. This serves as default * initialization stuff for PXA machines which can be overridden later if diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 75e3f611e5d8..3b7873f8e1f8 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mach-pxa/generic.h * * Author: Nicolas Pitre * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/reboot.h> diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 4764acca5480..4b4589cf431f 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/gumstix.c * @@ -7,10 +8,6 @@ * Created: Feb 14, 2008 * Copyright: Craig Hughes * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Implemented based on lubbock.c by Nicolas Pitre and code from Craig * Hughes */ @@ -33,7 +30,7 @@ #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/gumstix.h b/arch/arm/mach-pxa/gumstix.h index 825f2d1260ae..470250cdee16 100644 --- a/arch/arm/mach-pxa/gumstix.h +++ b/arch/arm/mach-pxa/gumstix.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/gumstix.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index be2a9c3fd55b..ece1e71c90a9 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Hardware definitions for HP iPAQ h5xxx Handheld Computers * @@ -6,11 +7,6 @@ * Copyright 2004-2005 Phil Blundell <pb@handhelds.org> * Copyright 2007-2008 Anton Vorontsov <cbouatmailru@gmail.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS * FITNESS FOR ANY PARTICULAR PURPOSE. diff --git a/arch/arm/mach-pxa/h5000.h b/arch/arm/mach-pxa/h5000.h index 252461fd2ac8..58687e94a0c7 100644 --- a/arch/arm/mach-pxa/h5000.h +++ b/arch/arm/mach-pxa/h5000.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Hardware definitions for HP iPAQ h5xxx Handheld Computers * * Copyright(20)02 Hewlett-Packard Company. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS * FITNESS FOR ANY PARTICULAR PURPOSE. diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index 70e9c06595f6..469ffeec6da5 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/himalaya.c * @@ -6,10 +7,6 @@ * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c * * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index b79b757fdd41..311268d186ab 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for HP iPAQ hx4700 PDAs. * @@ -7,11 +8,6 @@ * Copyright (c) 2004 Hewlett-Packard Company. * Copyright (c) 2005 SDG Systems, LLC * Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -19,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/fb.h> +#include <linux/gpio/machine.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/input.h> @@ -629,7 +626,7 @@ static struct spi_board_info tsc2046_board_info[] __initdata = { }, }; -static struct pxa2xx_spi_master pxa_ssp2_master_info = { +static struct pxa2xx_spi_controller pxa_ssp2_master_info = { .num_chipselect = 1, .enable_dma = 1, }; @@ -702,9 +699,7 @@ static struct regulator_init_data bq24022_init_data = { .consumer_supplies = bq24022_consumers, }; -static struct gpio bq24022_gpios[] = { - { GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" }, -}; +static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW }; static struct gpio_regulator_state bq24022_states[] = { { .value = 100000, .gpios = (0 << 0) }, @@ -714,12 +709,10 @@ static struct gpio_regulator_state bq24022_states[] = { static struct gpio_regulator_config bq24022_info = { .supply_name = "bq24022", - .enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN, - .enable_high = 0, .enabled_at_boot = 0, - .gpios = bq24022_gpios, - .nr_gpios = ARRAY_SIZE(bq24022_gpios), + .gflags = bq24022_gpiod_gflags, + .ngpios = ARRAY_SIZE(bq24022_gpiod_gflags), .states = bq24022_states, .nr_states = ARRAY_SIZE(bq24022_states), @@ -736,6 +729,17 @@ static struct platform_device bq24022 = { }, }; +static struct gpiod_lookup_table bq24022_gpiod_table = { + .dev_id = "gpio-regulator", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO96_HX4700_BQ24022_ISET2, + NULL, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO72_HX4700_BQ24022_nCHARGE_EN, + "enable", GPIO_ACTIVE_LOW), + { }, + }, +}; + /* * StrataFlash */ @@ -878,6 +882,7 @@ static void __init hx4700_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); + gpiod_add_lookup_table(&bq24022_gpiod_table); platform_add_devices(devices, ARRAY_SIZE(devices)); pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index cbaf4f6edcda..865b10344ea2 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/icontrol.c * @@ -7,10 +8,6 @@ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd. * * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/irq.h> @@ -115,12 +112,12 @@ static struct spi_board_info mcp251x_board_info[] = { } }; -static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = { +static struct pxa2xx_spi_controller pxa_ssp3_spi_master_info = { .num_chipselect = 2, .enable_dma = 1 }; -static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = { +static struct pxa2xx_spi_controller pxa_ssp4_spi_master_info = { .num_chipselect = 2, .enable_dma = 1 }; diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 7bfc246a1d75..fb0850af8496 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/idp.c * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc. * * 2001-09-13: Cliff Brake <cbrake@accelent.com> @@ -13,7 +10,6 @@ * 2005-02-15: Cliff Brake <cliff.brake@gmail.com> * <http://www.vibren.com> <http://bec-systems.com> * Updated for 2.6 kernel - * */ #include <linux/init.h> diff --git a/arch/arm/mach-pxa/idp.h b/arch/arm/mach-pxa/idp.h index 7182ff92b732..a89e6723b1a1 100644 --- a/arch/arm/mach-pxa/idp.h +++ b/arch/arm/mach-pxa/idp.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/idp.h * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc. * * 2001-09-13: Cliff Brake <cbrake@accelent.com> diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 1b0825911e62..04f3639c4082 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/include/asm-arm/arch-pxa/balloon3.h * @@ -5,10 +6,6 @@ * Created: Oct, 2005 * Copyright: Toby Churchill Ltd * Cribbed from mainstone.c, by Nicholas Pitre - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef ASM_ARCH_BALLOON3_H diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index c030d955bbd7..b565ca7b8cda 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Hardware specific definitions for SL-C7xx series of PDAs * * Copyright (c) 2004-2005 Richard Purdie * * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __ASM_ARCH_CORGI_H #define __ASM_ARCH_CORGI_H 1 diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h index 20026bdc6b24..79f9842a7e1c 100644 --- a/arch/arm/mach-pxa/include/mach/dma.h +++ b/arch/arm/mach-pxa/include/mach/dma.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/dma.h * * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h index f3e5509820d7..5c645600d401 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h +++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * eseries-gpio.h * * Copyright (C) Ian Molton <spyro@f2s.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /* e-series power button */ diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 55064124ca4e..ee7eab16135f 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/hardware.h * * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_HARDWARE_H diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h index 0e1bb46264f9..0c30e6d9c660 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/include/mach/hx4700.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * GPIO and IRQ definitions for HP iPAQ hx4700 * * Copyright (c) 2008 Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _HX4700_H_ diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 7e3ea351f3c7..22bf536a462d 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/irqs.h * * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_MACH_IRQS_H #define __ASM_MACH_IRQS_H diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h index 1eecf794acd2..72b5c3db37dc 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/lubbock.h * * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <mach/irqs.h> diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index c48b54d0f331..7d3af561af6f 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * GPIO and IRQ definitions for HTC Magician PDA phones * * Copyright (c) 2007 Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _MAGICIAN_H_ diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h index 474041a83d80..1698f2ffd7c7 100644 --- a/arch/arm/mach-pxa/include/mach/mainstone.h +++ b/arch/arm/mach-pxa/include/mach/mainstone.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/mainstone.h * * Author: Nicolas Pitre * Created: Nov 14, 2002 * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef ASM_ARCH_MAINSTONE_H diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h index 271e249ae34f..dbb961fb570e 100644 --- a/arch/arm/mach-pxa/include/mach/mfp.h +++ b/arch/arm/mach-pxa/include/mach/mfp.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/mfp.h * @@ -7,10 +8,6 @@ * * 2007-8-21: eric miao <eric.miao@marvell.com> * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_MFP_H diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h index 9bf4ea6a6f74..4b31bef9e50a 100644 --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h +++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * MTD primitives for XIP support. Architecture specific functions * @@ -6,10 +7,6 @@ * Author: Nicolas Pitre * Created: Nov 2, 2004 * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_PXA_MTD_XIP_H__ diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index b184f296023b..99a6d8b3a1e3 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * GPIOs and interrupts for Palm LifeDrive Handheld Computer * * Authors: Alex Osborne <ato@meshy.org> * Marek Vasut <marek.vasut@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _INCLUDE_PALMLD_H_ diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h index 81c727b3cfd2..9257a02c46e5 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/include/mach/palmtc.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/include/asm-arm/arch-pxa/palmtc-gpio.h * @@ -6,11 +7,6 @@ * Authors: Alex Osborne <bobofdoom@gmail.com> * Marek Vasut <marek.vasut@gmail.com> * Holger Bocklet <bitz.email@gmx.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _INCLUDE_PALMTC_H_ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 92bc1f05300d..ec88abf0fc6c 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * GPIOs and interrupts for Palm T|X Handheld Computer * @@ -6,11 +7,6 @@ * Authors: Marek Vasut <marek.vasut@gmail.com> * Cristiano P. <cristianop@users.sourceforge.net> * Jan Herman <2hp@seznam.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _INCLUDE_PALMTX_H_ diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h +++ /dev/null diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h index 5537d5601d70..fa121e135915 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/pxa2xx-regs.h * @@ -5,10 +6,6 @@ * * Author: Nicolas Pitre * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __PXA2XX_REGS_H diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index 888bf7ade15a..070f6c74196e 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h * * PXA3xx specific register definitions * * Copyright (C) 2007 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_PXA3XX_REGS_H diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h index b802f285fe00..9b2453a7ab23 100644 --- a/arch/arm/mach-pxa/include/mach/smemc.h +++ b/arch/arm/mach-pxa/include/mach/smemc.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Static memory controller register definitions for PXA CPUs * * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __SMEMC_REGS_H diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index 25c9f62e46aa..04828d8918aa 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Hardware specific definitions for SL-Cx000 series of PDAs * @@ -5,11 +6,6 @@ * Copyright (c) 2005 Richard Purdie * * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __ASM_ARCH_SPITZ_H #define __ASM_ARCH_SPITZ_H 1 diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 0497d95cef25..a499ed17931e 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Hardware specific definitions for Sharp SL-C6000x series of PDAs * * Copyright (c) 2005 Dirk Opfer * * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _ASM_ARCH_TOSA_H_ #define _ASM_ARCH_TOSA_H_ 1 diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index 8c27757e68ff..c36306064eee 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/uncompress.h * * Author: Nicolas Pitre * Copyright: (C) 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/serial_reg.h> diff --git a/arch/arm/mach-pxa/include/mach/vpac270.h b/arch/arm/mach-pxa/include/mach/vpac270.h index 7bfa3dd0fd5e..0cd094d8c553 100644 --- a/arch/arm/mach-pxa/include/mach/vpac270.h +++ b/arch/arm/mach-pxa/include/mach/vpac270.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * GPIOs and interrupts for Voipac PXA270 * * Copyright (C) 2010 * Marek Vasut <marek.vasut@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _INCLUDE_VPAC270_H_ diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h index 7b0f71ef3167..a78b2e28b1db 100644 --- a/arch/arm/mach-pxa/include/mach/z2.h +++ b/arch/arm/mach-pxa/include/mach/z2.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/z2.h * * Author: Ken McGuire * Created: Feb 6, 2009 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef ASM_ARCH_ZIPIT2_H diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 4e8c2116808e..74efc3ab595f 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/irq.c * @@ -6,10 +7,6 @@ * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/bitops.h> #include <linux/init.h> diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 39db4898dc4a..793f61375ee8 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/littleton.c * @@ -9,10 +10,6 @@ * * 2007-11-22 modified to align with latest kernel * eric miao <eric.miao@marvell.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/init.h> @@ -191,7 +188,7 @@ static inline void littleton_init_lcd(void) {}; #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */ #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static struct pxa2xx_spi_master littleton_spi_info = { +static struct pxa2xx_spi_controller littleton_spi_info = { .num_chipselect = 1, }; diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index e9f401b0a432..20e00e970385 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/lpd270.c * @@ -7,10 +8,6 @@ * Author: Nicolas Pitre * Created: Nov 05, 2002 * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/init.h> @@ -33,7 +30,7 @@ #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/lpd270.h b/arch/arm/mach-pxa/lpd270.h index 4edc712a2de8..4b096fb9d61f 100644 --- a/arch/arm/mach-pxa/lpd270.h +++ b/arch/arm/mach-pxa/lpd270.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/lpd270.h * * Author: Lennert Buytenhek * Created: Feb 10, 2006 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_LPD270_H diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index a1391e113ef4..a3ecccc24ec5 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/lubbock.c * @@ -6,10 +7,6 @@ * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/clkdev.h> #include <linux/gpio.h> @@ -39,7 +36,7 @@ #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -197,7 +194,7 @@ static struct platform_device sa1111_device = { * (to J5) and poking board registers (as done below). Else it's only useful * for the temperature sensors. */ -static struct pxa2xx_spi_master pxa_ssp_master_info = { +static struct pxa2xx_spi_controller pxa_ssp_master_info = { .num_chipselect = 1, }; diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 08b079653c3f..e1a394ac3eea 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for HTC Magician PDA phones: * i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110 @@ -6,11 +7,6 @@ * Copyright (c) 2006-2007 Philipp Zabel * * Based on hx4700.c, spitz.c and others. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -645,9 +641,8 @@ static struct regulator_init_data bq24022_init_data = { .consumer_supplies = bq24022_consumers, }; -static struct gpio bq24022_gpios[] = { - { EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" }, -}; + +static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW }; static struct gpio_regulator_state bq24022_states[] = { { .value = 100000, .gpios = (0 << 0) }, @@ -657,12 +652,10 @@ static struct gpio_regulator_state bq24022_states[] = { static struct gpio_regulator_config bq24022_info = { .supply_name = "bq24022", - .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, - .enable_high = 0, .enabled_at_boot = 1, - .gpios = bq24022_gpios, - .nr_gpios = ARRAY_SIZE(bq24022_gpios), + .gflags = bq24022_gpiod_gflags, + .ngpios = ARRAY_SIZE(bq24022_gpiod_gflags), .states = bq24022_states, .nr_states = ARRAY_SIZE(bq24022_states), @@ -679,6 +672,17 @@ static struct platform_device bq24022 = { }, }; +static struct gpiod_lookup_table bq24022_gpiod_table = { + .dev_id = "gpio-regulator", + .table = { + GPIO_LOOKUP("gpio-pxa", EGPIO_MAGICIAN_BQ24022_ISET2, + NULL, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, + "enable", GPIO_ACTIVE_LOW), + { }, + }, +}; + /* * fixed regulator for ads7846 */ @@ -932,7 +936,7 @@ struct pxa2xx_spi_chip tsc2046_chip_info = { .gpio_cs = GPIO14_MAGICIAN_TSC2046_CS, }; -static struct pxa2xx_spi_master magician_spi_info = { +static struct pxa2xx_spi_controller magician_spi_info = { .num_chipselect = 1, .enable_dma = 1, }; @@ -1027,6 +1031,7 @@ static void __init magician_init(void) regulator_register_always_on(0, "power", pwm_backlight_supply, ARRAY_SIZE(pwm_backlight_supply), 5000000); + gpiod_add_lookup_table(&bq24022_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d6e17d407ac0..1b7882920164 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/mainstone.c * @@ -7,10 +8,6 @@ * Author: Nicolas Pitre * Created: Nov 05, 2002 * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/gpio/gpio-reg.h> @@ -40,7 +37,7 @@ #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 3732aec76750..6a5451b186c2 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/mfp-pxa2xx.c * @@ -7,10 +8,6 @@ * functions, this is by concept samilar to the MFP configuration * on PXA3xx, what's more important, the low power pin state and * wakeup detection are also supported by the same framework. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/gpio-pxa.h> diff --git a/arch/arm/mach-pxa/mfp-pxa300.h b/arch/arm/mach-pxa/mfp-pxa300.h index 5ee51e28304d..1223e350cea0 100644 --- a/arch/arm/mach-pxa/mfp-pxa300.h +++ b/arch/arm/mach-pxa/mfp-pxa300.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/mfp-pxa300.h * @@ -6,10 +7,6 @@ * Copyright (C) 2007 Marvell International Ltd. * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_MFP_PXA300_H diff --git a/arch/arm/mach-pxa/mfp-pxa320.h b/arch/arm/mach-pxa/mfp-pxa320.h index e8797cfc72e0..21c31eb52d6c 100644 --- a/arch/arm/mach-pxa/mfp-pxa320.h +++ b/arch/arm/mach-pxa/mfp-pxa320.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/mfp-pxa320.h * @@ -6,10 +7,6 @@ * Copyright (C) 2007 Marvell International Ltd. * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_MFP_PXA320_H diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index 994edc0158d4..56114df9700d 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/mfp.c * @@ -7,10 +8,6 @@ * * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-pxa/mfp-pxa930.h b/arch/arm/mach-pxa/mfp-pxa930.h index 113967beeb67..0d195d3a8c61 100644 --- a/arch/arm/mach-pxa/mfp-pxa930.h +++ b/arch/arm/mach-pxa/mfp-pxa930.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/mfp-pxa930.h * * PXA930 specific MFP configuration definitions * * Copyright (C) 2007-2008 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_MFP_PXA9xx_H diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index d0fa5c72622d..c360023a989c 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -1,22 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Handles the Mitac Mio A701 Board * * Copyright (C) 2008 Robert Jarzmik - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/kernel.h> diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S index 42d93f40a59f..4ad2fa27fc41 100644 --- a/arch/arm/mach-pxa/mioa701_bootresume.S +++ b/arch/arm/mach-pxa/mioa701_bootresume.S @@ -1,8 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* Bootloader to resume MIO A701 * * 2007-1-12 Robert Jarzmik - * - * This code is licenced under the GPLv2. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 4d89029e5401..8ef8ac4ab4ac 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/mp900.c * @@ -7,10 +8,6 @@ * * 2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com> * 2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index e4248a3a8dfc..fde386f6cffe 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/mxm8x10.c * @@ -13,10 +14,6 @@ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za> * Hennie van der Merwe <hvdmerwe@tmtservices.co.za> * rework for upstream merge - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/serial_8250.h> diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index b94c45f65215..3ad0b3915ae1 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Common code for Palm LD, T5, TX, Z72 * * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-pxa/palm27x.h b/arch/arm/mach-pxa/palm27x.h index cd071f876132..bd3075bbb3aa 100644 --- a/arch/arm/mach-pxa/palm27x.h +++ b/arch/arm/mach-pxa/palm27x.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Common functions for Palm LD, T5, TX, Z72 * * Copyright (C) 2010 * Marek Vasut <marek.vasut@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __INCLUDE_MACH_PALM27X__ #define __INCLUDE_MACH_PALM27X__ diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index bf2b0cfc86df..5f73716a77f0 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hardware definitions for Palm LifeDrive * @@ -6,12 +7,7 @@ * Based on work of: * Alex Osborne <ato@meshy.org> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * (find more info at www.hackndev.com) - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 8811f11f670e..902403367786 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hardware definitions for Palm Tungsten|T5 * @@ -8,12 +9,7 @@ * Justin Kendrick <twilightsentry@gmail.com> * RichardT5 <richard_t5@users.sourceforge.net> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * (find more info at www.hackndev.com) - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-pxa/palmt5.h b/arch/arm/mach-pxa/palmt5.h index f850cc9de1b4..1fb1da7c8da3 100644 --- a/arch/arm/mach-pxa/palmt5.h +++ b/arch/arm/mach-pxa/palmt5.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer * @@ -5,11 +6,6 @@ * Marek Vasut <marek.vasut@gmail.com> * Justin Kendrick <twilightsentry@gmail.com> * RichardT5 <richard_t5@users.sourceforge.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _INCLUDE_PALMT5_H_ diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 7ce4fc287115..f52bd155e825 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/palmtc.c * @@ -8,10 +9,6 @@ * Based on work of: * Petr Blaha <p3t3@centrum.cz> * Chetan S. Kumar <shivakumar.chetan@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index e830005af8d0..a92b9665f425 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hardware definitions for Palm Tungsten|E2 * @@ -7,12 +8,7 @@ * Rewrite for mainline: * Marek Vasut <marek.vasut@gmail.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * (find more info at www.hackndev.com) - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-pxa/palmte2.h b/arch/arm/mach-pxa/palmte2.h index f89e989a7637..2589400c1a2f 100644 --- a/arch/arm/mach-pxa/palmte2.h +++ b/arch/arm/mach-pxa/palmte2.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer * * Author: * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _INCLUDE_PALMTE2_H_ diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 70f1a8a3aa94..2bf0f7f3ea24 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hardware definitions for Palm Treo smartphones * @@ -7,12 +8,7 @@ * * Author: Tomas Cech <sleep_walker@suse.cz> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * (find more info at www.hackndev.com) - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-pxa/palmtreo.h b/arch/arm/mach-pxa/palmtreo.h index 714b6574393e..5715cd505424 100644 --- a/arch/arm/mach-pxa/palmtreo.h +++ b/arch/arm/mach-pxa/palmtreo.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * GPIOs and interrupts for Palm Treo smartphones * @@ -7,12 +8,7 @@ * * Author: Tomas Cech <sleep_walker@suse.cz> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * find more info at www.hackndev.com - * */ #ifndef _INCLUDE_TREO_H_ diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index ef71bf2abb47..926593ecf1c9 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hardware definitions for PalmTX * @@ -9,12 +10,7 @@ * Jan Herman <2hp@seznam.cz> * Michal Hrusecky * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * (find more info at www.hackndev.com) - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index ea1c7b2ed8d4..77fe2e367324 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hardware definitions for Palm Zire72 * @@ -10,12 +11,7 @@ * Rewrite for mainline: * Marek Vasut <marek.vasut@gmail.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * (find more info at www.hackndev.com) - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-pxa/palmz72.h b/arch/arm/mach-pxa/palmz72.h index 0d4700a79612..40f3f9987983 100644 --- a/arch/arm/mach-pxa/palmz72.h +++ b/arch/arm/mach-pxa/palmz72.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * GPIOs and interrupts for Palm Zire72 Handheld Computer * * Authors: Alex Osborne <bobofdoom@gmail.com> * Jan Herman <2hp@seznam.cz> * Sergey Lapin <slapin@ossfans.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _INCLUDE_PALMZ72_H_ diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index ccca9f7575c3..7ff6f0d655c8 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/pcm027.c * Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027). @@ -14,10 +15,6 @@ * based on Intel Mainstone Board * * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/irq.h> @@ -132,7 +129,7 @@ static struct platform_device smc91x_device = { /* * SPI host and devices */ -static struct pxa2xx_spi_master pxa_ssp_master_info = { +static struct pxa2xx_spi_controller pxa_ssp_master_info = { .num_chipselect = 1, }; diff --git a/arch/arm/mach-pxa/pcm027.h b/arch/arm/mach-pxa/pcm027.h index 047cdf234f25..0c4ab636ce4e 100644 --- a/arch/arm/mach-pxa/pcm027.h +++ b/arch/arm/mach-pxa/pcm027.h @@ -1,22 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-pxa/include/mach/pcm027.h * * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de> * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index be19e3a4eacc..cb1c56769fbc 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-pxa/pcm990-baseboard.c * Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990). @@ -14,10 +15,6 @@ * based on Intel Mainstone Board * * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/irq.h> diff --git a/arch/arm/mach-pxa/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h index 79d35adfa786..5be11d1b7019 100644 --- a/arch/arm/mach-pxa/pcm990_baseboard.h +++ b/arch/arm/mach-pxa/pcm990_baseboard.h @@ -1,22 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h * * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de> * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include "pcm027.h" diff --git a/arch/arm/mach-pxa/pm.h b/arch/arm/mach-pxa/pm.h index 3aab90d8d2b7..00ea3529e30e 100644 --- a/arch/arm/mach-pxa/pm.h +++ b/arch/arm/mach-pxa/pm.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/suspend.h> diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index c2a43d4cfd3e..3a4ecc3c8f8b 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/poodle.c * @@ -6,10 +7,6 @@ * Based on: * linux/arch/arm/mach-pxa/lubbock.c Author: Nicolas Pitre * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Change Log * 12-Dec-2002 Sharp Corporation for Poodle * John Lenz <lenz@cs.wisc.edu> updates to 2.6 @@ -196,7 +193,7 @@ struct platform_device poodle_locomo_device = { EXPORT_SYMBOL(poodle_locomo_device); #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static struct pxa2xx_spi_master poodle_spi_info = { +static struct pxa2xx_spi_controller poodle_spi_info = { .num_chipselect = 1, }; diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c index aa9b255f5570..d32d5c8e966f 100644 --- a/arch/arm/mach-pxa/pxa-dt.c +++ b/arch/arm/mach-pxa/pxa-dt.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/pxa-dt.c * * Copyright (C) 2012 Daniel Mack - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/irq.h> diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index ab8808ce7e21..678641ab46e5 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/pxa25x.c * @@ -7,10 +8,6 @@ * * Code specific to PXA21x/25x/26x variants. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Since this file should be linked before any other machine specific file, * the __initcall() here will be executed first. This serves as default * initialization stuff for PXA machines which can be overridden later if diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 5a8990a9313d..f0ba7ed24cb6 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/pxa27x.c * @@ -6,10 +7,6 @@ * Copyright: MontaVista Software Inc. * * Code specific to PXA27x aka Bulverde. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/dmaengine.h> #include <linux/dma/pxa-dma.h> diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index 6b5e566f52c8..2d26cd2afbf3 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/pxa2xx.c * * code specific to pxa2xx * * Copyright (C) 2008 Dmitry Baryshkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index df83b1bddf34..7f2f5a6a2263 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/pxa300.c * @@ -7,10 +8,6 @@ * * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index a26eec57eec6..78abcc741df7 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/pxa320.c * @@ -7,10 +8,6 @@ * * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index b3e2016f24b1..4bd7da1f8657 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c * @@ -7,10 +8,6 @@ * * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il> * initial version: pxa310 USB Host mode support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index df9c8970adcf..560160682df6 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/pxa3xx.c * @@ -7,10 +8,6 @@ * * 2007-09-02: eric miao <eric.miao@marvell.com> * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/dmaengine.h> #include <linux/dma/pxa-dma.h> diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index da912be6eae7..bf91de4267e5 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/pxa930.c * * Code specific to PXA930 * * Copyright (C) 2007-2008 Marvell Internation Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c index 941508585e34..45c19ca96f7a 100644 --- a/arch/arm/mach-pxa/pxa_cplds_irqs.c +++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Intel Reference Systems cplds * * Copyright (C) 2014 Robert Jarzmik * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * * Cplds motherboard driver, supporting lubbock and mainstone SoC board. */ diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c deleted file mode 100644 index e1db072756f2..000000000000 --- a/arch/arm/mach-pxa/raumfeld.c +++ /dev/null @@ -1,1187 +0,0 @@ -/* - * arch/arm/mach-pxa/raumfeld.c - * - * Support for the following Raumfeld devices: - * - * * Controller - * * Connector - * * Speaker S/M - * - * See http://www.raumfeld.com for details. - * - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/property.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/smsc911x.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> -#include <linux/leds.h> -#include <linux/w1-gpio.h> -#include <linux/sched.h> -#include <linux/pwm.h> -#include <linux/pwm_backlight.h> -#include <linux/i2c.h> -#include <linux/platform_data/i2c-pxa.h> -#include <linux/spi/spi.h> -#include <linux/spi/spi_gpio.h> -#include <linux/lis3lv02d.h> -#include <linux/pda_power.h> -#include <linux/power_supply.h> -#include <linux/regulator/max8660.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/consumer.h> -#include <linux/delay.h> - -#include <asm/system_info.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "pxa300.h" -#include <linux/platform_data/usb-ohci-pxa27x.h> -#include <linux/platform_data/video-pxafb.h> -#include <linux/platform_data/mmc-pxamci.h> -#include <linux/platform_data/mtd-nand-pxa3xx.h> - -#include "generic.h" -#include "devices.h" - -/* common GPIO definitions */ - -/* inputs */ -#define GPIO_ON_OFF (14) -#define GPIO_VOLENC_A (19) -#define GPIO_VOLENC_B (20) -#define GPIO_CHARGE_DONE (23) -#define GPIO_CHARGE_IND (27) -#define GPIO_TOUCH_IRQ (32) -#define GPIO_ETH_IRQ (40) -#define GPIO_SPI_MISO (98) -#define GPIO_ACCEL_IRQ (104) -#define GPIO_RESCUE_BOOT (115) -#define GPIO_DOCK_DETECT (116) -#define GPIO_KEY1 (117) -#define GPIO_KEY2 (118) -#define GPIO_KEY3 (119) -#define GPIO_CHARGE_USB_OK (112) -#define GPIO_CHARGE_DC_OK (101) -#define GPIO_CHARGE_USB_SUSP (102) - -/* outputs */ -#define GPIO_SHUTDOWN_SUPPLY (16) -#define GPIO_SHUTDOWN_BATT (18) -#define GPIO_CHRG_PEN2 (31) -#define GPIO_TFT_VA_EN (33) -#define GPIO_SPDIF_CS (34) -#define GPIO_LED2 (35) -#define GPIO_LED1 (36) -#define GPIO_SPDIF_RESET (38) -#define GPIO_SPI_CLK (95) -#define GPIO_MCLK_DAC_CS (96) -#define GPIO_SPI_MOSI (97) -#define GPIO_W1_PULLUP_ENABLE (105) -#define GPIO_DISPLAY_ENABLE (106) -#define GPIO_MCLK_RESET (111) -#define GPIO_W2W_RESET (113) -#define GPIO_W2W_PDN (114) -#define GPIO_CODEC_RESET (120) -#define GPIO_AUDIO_VA_ENABLE (124) -#define GPIO_ACCEL_CS (125) -#define GPIO_ONE_WIRE (126) - -/* - * GPIO configurations - */ -static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = { - /* UART1 */ - GPIO77_UART1_RXD, - GPIO78_UART1_TXD, - GPIO79_UART1_CTS, - GPIO81_UART1_DSR, - GPIO83_UART1_DTR, - GPIO84_UART1_RTS, - - /* UART3 */ - GPIO110_UART3_RXD, - - /* USB Host */ - GPIO0_2_USBH_PEN, - GPIO1_2_USBH_PWR, - - /* I2C */ - GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - - /* SPI */ - GPIO34_GPIO, /* SPDIF_CS */ - GPIO96_GPIO, /* MCLK_CS */ - GPIO125_GPIO, /* ACCEL_CS */ - - /* MMC */ - GPIO3_MMC1_DAT0, - GPIO4_MMC1_DAT1, - GPIO5_MMC1_DAT2, - GPIO6_MMC1_DAT3, - GPIO7_MMC1_CLK, - GPIO8_MMC1_CMD, - - /* One-wire */ - GPIO126_GPIO | MFP_LPM_FLOAT, - GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW, - - /* CHRG_USB_OK */ - GPIO101_GPIO | MFP_PULL_HIGH, - /* CHRG_USB_OK */ - GPIO112_GPIO | MFP_PULL_HIGH, - /* CHRG_USB_SUSP */ - GPIO102_GPIO, - /* DISPLAY_ENABLE */ - GPIO106_GPIO, - /* DOCK_DETECT */ - GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - - /* LCD */ - GPIO54_LCD_LDD_0, - GPIO55_LCD_LDD_1, - GPIO56_LCD_LDD_2, - GPIO57_LCD_LDD_3, - GPIO58_LCD_LDD_4, - GPIO59_LCD_LDD_5, - GPIO60_LCD_LDD_6, - GPIO61_LCD_LDD_7, - GPIO62_LCD_LDD_8, - GPIO63_LCD_LDD_9, - GPIO64_LCD_LDD_10, - GPIO65_LCD_LDD_11, - GPIO66_LCD_LDD_12, - GPIO67_LCD_LDD_13, - GPIO68_LCD_LDD_14, - GPIO69_LCD_LDD_15, - GPIO70_LCD_LDD_16, - GPIO71_LCD_LDD_17, - GPIO72_LCD_FCLK, - GPIO73_LCD_LCLK, - GPIO74_LCD_PCLK, - GPIO75_LCD_BIAS, -}; - -static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = { - /* UART1 */ - GPIO77_UART1_RXD, - GPIO78_UART1_TXD, - GPIO79_UART1_CTS, - GPIO81_UART1_DSR, - GPIO83_UART1_DTR, - GPIO84_UART1_RTS, - - /* UART3 */ - GPIO110_UART3_RXD, - - /* USB Host */ - GPIO0_2_USBH_PEN, - GPIO1_2_USBH_PWR, - - /* I2C */ - GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - - /* SPI */ - GPIO34_GPIO, /* SPDIF_CS */ - GPIO96_GPIO, /* MCLK_CS */ - GPIO125_GPIO, /* ACCEL_CS */ - - /* MMC */ - GPIO3_MMC1_DAT0, - GPIO4_MMC1_DAT1, - GPIO5_MMC1_DAT2, - GPIO6_MMC1_DAT3, - GPIO7_MMC1_CLK, - GPIO8_MMC1_CMD, - - /* Ethernet */ - GPIO1_nCS2, /* CS */ - GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */ - - /* SSP for I2S */ - GPIO85_SSP1_SCLK, - GPIO89_SSP1_EXTCLK, - GPIO86_SSP1_FRM, - GPIO87_SSP1_TXD, - GPIO88_SSP1_RXD, - GPIO90_SSP1_SYSCLK, - - /* SSP2 for S/PDIF */ - GPIO25_SSP2_SCLK, - GPIO26_SSP2_FRM, - GPIO27_SSP2_TXD, - GPIO29_SSP2_EXTCLK, - - /* LEDs */ - GPIO35_GPIO | MFP_LPM_PULL_LOW, - GPIO36_GPIO | MFP_LPM_DRIVE_HIGH, -}; - -static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = { - /* UART1 */ - GPIO77_UART1_RXD, - GPIO78_UART1_TXD, - GPIO79_UART1_CTS, - GPIO81_UART1_DSR, - GPIO83_UART1_DTR, - GPIO84_UART1_RTS, - - /* UART3 */ - GPIO110_UART3_RXD, - - /* USB Host */ - GPIO0_2_USBH_PEN, - GPIO1_2_USBH_PWR, - - /* I2C */ - GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT, - - /* SPI */ - GPIO34_GPIO, /* SPDIF_CS */ - GPIO96_GPIO, /* MCLK_CS */ - GPIO125_GPIO, /* ACCEL_CS */ - - /* MMC */ - GPIO3_MMC1_DAT0, - GPIO4_MMC1_DAT1, - GPIO5_MMC1_DAT2, - GPIO6_MMC1_DAT3, - GPIO7_MMC1_CLK, - GPIO8_MMC1_CMD, - - /* Ethernet */ - GPIO1_nCS2, /* CS */ - GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */ - - /* SSP for I2S */ - GPIO85_SSP1_SCLK, - GPIO89_SSP1_EXTCLK, - GPIO86_SSP1_FRM, - GPIO87_SSP1_TXD, - GPIO88_SSP1_RXD, - GPIO90_SSP1_SYSCLK, - - /* LEDs */ - GPIO35_GPIO | MFP_LPM_PULL_LOW, - GPIO36_GPIO | MFP_LPM_DRIVE_HIGH, -}; - -/* - * SMSC LAN9220 Ethernet - */ - -static struct resource smc91x_resources[] = { - { - .start = PXA3xx_CS2_PHYS, - .end = PXA3xx_CS2_PHYS + 0xfffff, - .flags = IORESOURCE_MEM, - }, - { - .start = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, - } -}; - -static struct smsc911x_platform_config raumfeld_smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static struct platform_device smc91x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, - .dev = { - .platform_data = &raumfeld_smsc911x_config, - } -}; - -/** - * NAND - */ - -static struct mtd_partition raumfeld_nand_partitions[] = { - { - .name = "Bootloader", - .offset = 0, - .size = 0xa0000, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "BootloaderEnvironment", - .offset = 0xa0000, - .size = 0x20000, - }, - { - .name = "BootloaderSplashScreen", - .offset = 0xc0000, - .size = 0x60000, - }, - { - .name = "UBI", - .offset = 0x120000, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct pxa3xx_nand_platform_data raumfeld_nand_info = { - .keep_config = 1, - .parts = raumfeld_nand_partitions, - .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions), -}; - -/** - * USB (OHCI) support - */ - -static struct pxaohci_platform_data raumfeld_ohci_info = { - .port_mode = PMM_GLOBAL_MODE, - .flags = ENABLE_PORT1, -}; - -/** - * Rotary encoder input device - */ - -static struct gpiod_lookup_table raumfeld_rotary_gpios_table = { - .dev_id = "rotary-encoder.0", - .table = { - GPIO_LOOKUP_IDX("gpio-0", - GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("gpio-0", - GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static const struct property_entry raumfeld_rotary_properties[] __initconst = { - PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24), - PROPERTY_ENTRY_U32("linux,axis", REL_X), - PROPERTY_ENTRY_U32("rotary-encoder,relative_axis", 1), - { }, -}; - -static struct platform_device rotary_encoder_device = { - .name = "rotary-encoder", - .id = 0, -}; - -/** - * GPIO buttons - */ - -static struct gpio_keys_button gpio_keys_button[] = { - { - .code = KEY_F1, - .type = EV_KEY, - .gpio = GPIO_KEY1, - .active_low = 1, - .wakeup = 0, - .debounce_interval = 5, /* ms */ - .desc = "Button 1", - }, - { - .code = KEY_F2, - .type = EV_KEY, - .gpio = GPIO_KEY2, - .active_low = 1, - .wakeup = 0, - .debounce_interval = 5, /* ms */ - .desc = "Button 2", - }, - { - .code = KEY_F3, - .type = EV_KEY, - .gpio = GPIO_KEY3, - .active_low = 1, - .wakeup = 0, - .debounce_interval = 5, /* ms */ - .desc = "Button 3", - }, - { - .code = KEY_F4, - .type = EV_KEY, - .gpio = GPIO_RESCUE_BOOT, - .active_low = 0, - .wakeup = 0, - .debounce_interval = 5, /* ms */ - .desc = "rescue boot button", - }, - { - .code = KEY_F5, - .type = EV_KEY, - .gpio = GPIO_DOCK_DETECT, - .active_low = 1, - .wakeup = 0, - .debounce_interval = 5, /* ms */ - .desc = "dock detect", - }, - { - .code = KEY_F6, - .type = EV_KEY, - .gpio = GPIO_ON_OFF, - .active_low = 0, - .wakeup = 0, - .debounce_interval = 5, /* ms */ - .desc = "on_off button", - }, -}; - -static struct gpio_keys_platform_data gpio_keys_platform_data = { - .buttons = gpio_keys_button, - .nbuttons = ARRAY_SIZE(gpio_keys_button), - .rep = 0, -}; - -static struct platform_device raumfeld_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_keys_platform_data, - } -}; - -/** - * GPIO LEDs - */ - -static struct gpio_led raumfeld_leds[] = { - { - .name = "raumfeld:1", - .gpio = GPIO_LED1, - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { - .name = "raumfeld:2", - .gpio = GPIO_LED2, - .active_low = 0, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - } -}; - -static struct gpio_led_platform_data raumfeld_led_platform_data = { - .leds = raumfeld_leds, - .num_leds = ARRAY_SIZE(raumfeld_leds), -}; - -static struct platform_device raumfeld_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &raumfeld_led_platform_data, - }, -}; - -/** - * One-wire (W1 bus) support - */ - -static void w1_enable_external_pullup(int enable) -{ - gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable); - msleep(100); -} - -static struct gpiod_lookup_table raumfeld_w1_gpiod_table = { - .dev_id = "w1-gpio", - .table = { - GPIO_LOOKUP_IDX("gpio-pxa", GPIO_ONE_WIRE, NULL, 0, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - }, -}; - -static struct w1_gpio_platform_data w1_gpio_platform_data = { - .enable_external_pullup = w1_enable_external_pullup, -}; - -static struct platform_device raumfeld_w1_gpio_device = { - .name = "w1-gpio", - .dev = { - .platform_data = &w1_gpio_platform_data - } -}; - -static void __init raumfeld_w1_init(void) -{ - int ret = gpio_request(GPIO_W1_PULLUP_ENABLE, - "W1 external pullup enable"); - - if (ret < 0) - pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n"); - else - gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0); - - gpiod_add_lookup_table(&raumfeld_w1_gpiod_table); - platform_device_register(&raumfeld_w1_gpio_device); -} - -/** - * Framebuffer device - */ - -static struct pwm_lookup raumfeld_pwm_lookup[] = { - PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000, - PWM_POLARITY_NORMAL), -}; - -/* PWM controlled backlight */ -static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = { - .max_brightness = 100, - .dft_brightness = 100, - .enable_gpio = -1, -}; - -static struct platform_device raumfeld_pwm_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &pxa27x_device_pwm0.dev, - .platform_data = &raumfeld_pwm_backlight_data, - } -}; - -/* LT3593 controlled backlight */ -static struct gpio_led raumfeld_lt3593_led = { - .name = "backlight", - .gpio = mfp_to_gpio(MFP_PIN_GPIO17), - .default_state = LEDS_GPIO_DEFSTATE_ON, -}; - -static struct gpio_led_platform_data raumfeld_lt3593_platform_data = { - .leds = &raumfeld_lt3593_led, - .num_leds = 1, -}; - -static struct platform_device raumfeld_lt3593_device = { - .name = "leds-lt3593", - .id = -1, - .dev = { - .platform_data = &raumfeld_lt3593_platform_data, - }, -}; - -static struct pxafb_mode_info sharp_lq043t3dx02_mode = { - .pixclock = 111000, - .xres = 480, - .yres = 272, - .bpp = 16, - .hsync_len = 41, - .left_margin = 2, - .right_margin = 1, - .vsync_len = 10, - .upper_margin = 3, - .lower_margin = 1, - .sync = 0, -}; - -static struct pxafb_mach_info raumfeld_sharp_lcd_info = { - .modes = &sharp_lq043t3dx02_mode, - .num_modes = 1, - .video_mem_size = 0x400000, - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, -#ifdef CONFIG_PXA3XX_GCU - .acceleration_enabled = 1, -#endif -}; - -static void __init raumfeld_lcd_init(void) -{ - int ret; - - ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable"); - if (ret < 0) - pr_warn("Unable to request GPIO_TFT_VA_EN\n"); - else - gpio_direction_output(GPIO_TFT_VA_EN, 1); - - msleep(100); - - ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable"); - if (ret < 0) - pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n"); - else - gpio_direction_output(GPIO_DISPLAY_ENABLE, 1); - - /* Hardware revision 2 has the backlight regulator controlled - * by an LT3593, earlier and later devices use PWM for that. */ - if ((system_rev & 0xff) == 2) { - platform_device_register(&raumfeld_lt3593_device); - } else { - mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; - pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); - pwm_add_table(raumfeld_pwm_lookup, - ARRAY_SIZE(raumfeld_pwm_lookup)); - platform_device_register(&raumfeld_pwm_backlight_device); - } - - pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); - platform_device_register(&pxa3xx_device_gcu); -} - -/** - * SPI devices - */ - -static struct spi_gpio_platform_data raumfeld_spi_platform_data = { - .num_chipselect = 3, -}; - -static struct platform_device raumfeld_spi_device = { - .name = "spi_gpio", - .id = 0, - .dev = { - .platform_data = &raumfeld_spi_platform_data, - } -}; - -static struct gpiod_lookup_table raumfeld_spi_gpiod_table = { - .dev_id = "spi_gpio", - .table = { - GPIO_LOOKUP("gpio-0", GPIO_SPI_CLK, - "sck", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-0", GPIO_SPI_MOSI, - "mosi", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-0", GPIO_SPI_MISO, - "miso", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio-0", GPIO_SPDIF_CS, - "cs", 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio-0", GPIO_ACCEL_CS, - "cs", 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio-0", GPIO_MCLK_DAC_CS, - "cs", 2, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct lis3lv02d_platform_data lis3_pdata = { - .click_flags = LIS3_CLICK_SINGLE_X | - LIS3_CLICK_SINGLE_Y | - LIS3_CLICK_SINGLE_Z, - .irq_cfg = LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK, - .wakeup_flags = LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI | - LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI | - LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI, - .wakeup_thresh = 10, - .click_thresh_x = 10, - .click_thresh_y = 10, - .click_thresh_z = 10, -}; - -#define SPI_AK4104 \ -{ \ - .modalias = "ak4104-codec", \ - .max_speed_hz = 10000, \ - .bus_num = 0, \ - .chip_select = 0, \ -} - -#define SPI_LIS3 \ -{ \ - .modalias = "lis3lv02d_spi", \ - .max_speed_hz = 1000000, \ - .bus_num = 0, \ - .chip_select = 1, \ - .platform_data = &lis3_pdata, \ - .irq = PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ), \ -} - -#define SPI_DAC7512 \ -{ \ - .modalias = "dac7512", \ - .max_speed_hz = 1000000, \ - .bus_num = 0, \ - .chip_select = 2, \ -} - -static struct spi_board_info connector_spi_devices[] __initdata = { - SPI_AK4104, - SPI_DAC7512, -}; - -static struct spi_board_info speaker_spi_devices[] __initdata = { - SPI_DAC7512, -}; - -static struct spi_board_info controller_spi_devices[] __initdata = { - SPI_LIS3, -}; - -/** - * MMC for Marvell Libertas 8688 via SDIO - */ - -static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data) -{ - gpio_set_value(GPIO_W2W_RESET, 1); - gpio_set_value(GPIO_W2W_PDN, 1); - - return 0; -} - -static void raumfeld_mci_exit(struct device *dev, void *data) -{ - gpio_set_value(GPIO_W2W_RESET, 0); - gpio_set_value(GPIO_W2W_PDN, 0); -} - -static struct pxamci_platform_data raumfeld_mci_platform_data = { - .init = raumfeld_mci_init, - .exit = raumfeld_mci_exit, - .detect_delay_ms = 200, -}; - -/* - * External power / charge logic - */ - -static int power_supply_init(struct device *dev) -{ - return 0; -} - -static void power_supply_exit(struct device *dev) -{ -} - -static int raumfeld_is_ac_online(void) -{ - return !gpio_get_value(GPIO_CHARGE_DC_OK); -} - -static int raumfeld_is_usb_online(void) -{ - return 0; -} - -static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" }; - -static void raumfeld_power_signal_charged(void) -{ - struct power_supply *psy = - power_supply_get_by_name(raumfeld_power_supplicants[0]); - - if (psy) { - power_supply_set_battery_charged(psy); - power_supply_put(psy); - } -} - -static int raumfeld_power_resume(void) -{ - /* check if GPIO_CHARGE_DONE went low while we were sleeping */ - if (!gpio_get_value(GPIO_CHARGE_DONE)) - raumfeld_power_signal_charged(); - - return 0; -} - -static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = raumfeld_is_ac_online, - .is_usb_online = raumfeld_is_usb_online, - .exit = power_supply_exit, - .supplied_to = raumfeld_power_supplicants, - .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants), - .resume = raumfeld_power_resume, -}; - -static struct resource power_supply_resources[] = { - { - .name = "ac", - .flags = IORESOURCE_IRQ | - IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, - .start = GPIO_CHARGE_DC_OK, - .end = GPIO_CHARGE_DC_OK, - }, -}; - -static irqreturn_t charge_done_irq(int irq, void *dev_id) -{ - raumfeld_power_signal_charged(); - return IRQ_HANDLED; -} - -static struct platform_device raumfeld_power_supply = { - .name = "pda-power", - .id = -1, - .dev = { - .platform_data = &power_supply_info, - }, - .resource = power_supply_resources, - .num_resources = ARRAY_SIZE(power_supply_resources), -}; - -static void __init raumfeld_power_init(void) -{ - int ret; - - /* Set PEN2 high to enable maximum charge current */ - ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2"); - if (ret < 0) - pr_warn("Unable to request GPIO_CHRG_PEN2\n"); - else - gpio_direction_output(GPIO_CHRG_PEN2, 1); - - ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK"); - if (ret < 0) - pr_warn("Unable to request GPIO_CHARGE_DC_OK\n"); - - ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP"); - if (ret < 0) - pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n"); - else - gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0); - - power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK); - power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK); - - ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE), - &charge_done_irq, IORESOURCE_IRQ_LOWEDGE, - "charge_done", NULL); - - if (ret < 0) - printk(KERN_ERR "%s: unable to register irq %d\n", __func__, - GPIO_CHARGE_DONE); - else - platform_device_register(&raumfeld_power_supply); -} - -/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */ - -static struct regulator_consumer_supply audio_va_consumer_supply = - REGULATOR_SUPPLY("va", "0-0048"); - -static struct regulator_init_data audio_va_initdata = { - .consumer_supplies = &audio_va_consumer_supply, - .num_consumer_supplies = 1, - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, -}; - -static struct fixed_voltage_config audio_va_config = { - .supply_name = "audio_va", - .microvolts = 5000000, - .enable_high = 1, - .enabled_at_boot = 0, - .init_data = &audio_va_initdata, -}; - -static struct platform_device audio_va_device = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &audio_va_config, - }, -}; - -static struct gpiod_lookup_table audio_va_gpiod_table = { - .dev_id = "reg-fixed-voltage.0", - .table = { - GPIO_LOOKUP("gpio-pxa", GPIO_AUDIO_VA_ENABLE, - NULL, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/* Dummy supplies for Codec's VD/VLC */ - -static struct regulator_consumer_supply audio_dummy_supplies[] = { - REGULATOR_SUPPLY("vd", "0-0048"), - REGULATOR_SUPPLY("vlc", "0-0048"), -}; - -static struct regulator_init_data audio_dummy_initdata = { - .consumer_supplies = audio_dummy_supplies, - .num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies), - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, -}; - -static struct fixed_voltage_config audio_dummy_config = { - .supply_name = "audio_vd", - .microvolts = 3300000, - .init_data = &audio_dummy_initdata, -}; - -static struct platform_device audio_supply_dummy_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &audio_dummy_config, - }, -}; - -static struct platform_device *audio_regulator_devices[] = { - &audio_va_device, - &audio_supply_dummy_device, -}; - -/** - * Regulator support via MAX8660 - */ - -static struct regulator_consumer_supply vcc_mmc_supply = - REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0"); - -static struct regulator_init_data vcc_mmc_init_data = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE, - }, - .consumer_supplies = &vcc_mmc_supply, - .num_consumer_supplies = 1, -}; - -static struct max8660_subdev_data max8660_v6_subdev_data = { - .id = MAX8660_V6, - .name = "vmmc", - .platform_data = &vcc_mmc_init_data, -}; - -static struct max8660_platform_data max8660_pdata = { - .subdevs = &max8660_v6_subdev_data, - .num_subdevs = 1, -}; - -/** - * I2C devices - */ - -static struct i2c_board_info raumfeld_pwri2c_board_info = { - .type = "max8660", - .addr = 0x34, - .platform_data = &max8660_pdata, -}; - -static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { - .type = "cs4270", - .addr = 0x48, -}; - -static struct gpiod_lookup_table raumfeld_controller_gpios_table = { - .dev_id = "0-000a", - .table = { - GPIO_LOOKUP("gpio-pxa", - GPIO_TOUCH_IRQ, "attn", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static const struct resource raumfeld_controller_resources[] __initconst = { - { - .start = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, - }, -}; - -static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { - .type = "eeti_ts", - .addr = 0x0a, - .resources = raumfeld_controller_resources, - .num_resources = ARRAY_SIZE(raumfeld_controller_resources), -}; - -static struct platform_device *raumfeld_common_devices[] = { - &raumfeld_gpio_keys_device, - &raumfeld_led_device, - &raumfeld_spi_device, -}; - -static void __init raumfeld_audio_init(void) -{ - int ret; - - ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset"); - if (ret < 0) - pr_warn("unable to request GPIO_CODEC_RESET\n"); - else - gpio_direction_output(GPIO_CODEC_RESET, 1); - - ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset"); - if (ret < 0) - pr_warn("unable to request GPIO_SPDIF_RESET\n"); - else - gpio_direction_output(GPIO_SPDIF_RESET, 1); - - ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset"); - if (ret < 0) - pr_warn("unable to request GPIO_MCLK_RESET\n"); - else - gpio_direction_output(GPIO_MCLK_RESET, 1); - - gpiod_add_lookup_table(&audio_va_gpiod_table); - platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices)); -} - -static void __init raumfeld_common_init(void) -{ - int ret; - - /* The on/off button polarity has changed after revision 1 */ - if ((system_rev & 0xff) > 1) { - int i; - - for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++) - if (!strcmp(gpio_keys_button[i].desc, "on_off button")) - gpio_keys_button[i].active_low = 1; - } - - enable_irq_wake(IRQ_WAKEUP0); - - pxa3xx_set_nand_info(&raumfeld_nand_info); - pxa3xx_set_i2c_power_info(NULL); - pxa_set_ohci_info(&raumfeld_ohci_info); - pxa_set_mci_info(&raumfeld_mci_platform_data); - pxa_set_i2c_info(NULL); - pxa_set_ffuart_info(NULL); - - ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset"); - if (ret < 0) - pr_warn("Unable to request GPIO_W2W_RESET\n"); - else - gpio_direction_output(GPIO_W2W_RESET, 0); - - ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup"); - if (ret < 0) - pr_warn("Unable to request GPIO_W2W_PDN\n"); - else - gpio_direction_output(GPIO_W2W_PDN, 0); - - /* this can be used to switch off the device */ - ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown"); - if (ret < 0) - pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n"); - else - gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0); - - gpiod_add_lookup_table(&raumfeld_spi_gpiod_table); - platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices)); - i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1); -} - -static void __init __maybe_unused raumfeld_controller_init(void) -{ - int ret; - - pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config)); - - gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); - device_add_properties(&rotary_encoder_device.dev, - raumfeld_rotary_properties); - platform_device_register(&rotary_encoder_device); - - spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices)); - - gpiod_add_lookup_table(&raumfeld_controller_gpios_table); - i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1); - - ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown"); - if (ret < 0) - pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n"); - else - gpio_direction_output(GPIO_SHUTDOWN_BATT, 0); - - raumfeld_common_init(); - raumfeld_power_init(); - raumfeld_lcd_init(); - raumfeld_w1_init(); -} - -static void __init __maybe_unused raumfeld_connector_init(void) -{ - pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config)); - spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices)); - i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1); - - platform_device_register(&smc91x_device); - - raumfeld_audio_init(); - raumfeld_common_init(); -} - -static void __init __maybe_unused raumfeld_speaker_init(void) -{ - pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config)); - spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices)); - i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1); - - platform_device_register(&smc91x_device); - - gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); - device_add_properties(&rotary_encoder_device.dev, - raumfeld_rotary_properties); - platform_device_register(&rotary_encoder_device); - - raumfeld_audio_init(); - raumfeld_common_init(); -} - -/* physical memory regions */ -#define RAUMFELD_SDRAM_BASE 0xa0000000 /* SDRAM region */ - -#ifdef CONFIG_MACH_RAUMFELD_RC -MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") - .atag_offset = 0x100, - .init_machine = raumfeld_controller_init, - .map_io = pxa3xx_map_io, - .nr_irqs = PXA_NR_IRQS, - .init_irq = pxa3xx_init_irq, - .handle_irq = pxa3xx_handle_irq, - .init_time = pxa_timer_init, - .restart = pxa_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR -MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") - .atag_offset = 0x100, - .init_machine = raumfeld_connector_init, - .map_io = pxa3xx_map_io, - .nr_irqs = PXA_NR_IRQS, - .init_irq = pxa3xx_init_irq, - .handle_irq = pxa3xx_handle_irq, - .init_time = pxa_timer_init, - .restart = pxa_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_RAUMFELD_SPEAKER -MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") - .atag_offset = 0x100, - .init_machine = raumfeld_speaker_init, - .map_io = pxa3xx_map_io, - .nr_irqs = PXA_NR_IRQS, - .init_irq = pxa3xx_init_irq, - .handle_irq = pxa3xx_handle_irq, - .init_time = pxa_timer_init, - .restart = pxa_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 263b15249b5b..af78405aa4e9 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0-only #include <linux/kernel.h> #include <linux/module.h> #include <linux/delay.h> diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 834991034f30..3275b679792b 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/saar.c * * Support for the Marvell PXA930 Handheld Platform (aka SAAR) * * Copyright (C) 2007-2008 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index ef9fd9b759cb..83cfbb882a2d 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00 * series of PDAs @@ -5,11 +6,6 @@ * Copyright (c) 2004-2005 Richard Purdie * * Based on code written by Sharp for 2.4 kernels - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #undef DEBUG diff --git a/arch/arm/mach-pxa/sharpsl_pm.h b/arch/arm/mach-pxa/sharpsl_pm.h index fa75b6df8134..20e4cab64d85 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.h +++ b/arch/arm/mach-pxa/sharpsl_pm.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * SharpSL Battery/PM Driver * * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _MACH_SHARPSL_PM #define _MACH_SHARPSL_PM diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 306818e2cf54..a4fdc399d152 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for Sharp SL-Cxx00 Series of PDAs * Models: SL-C3000 (Spitz), SL-C1000 (Akita) and SL-C3100 (Borzoi) @@ -5,11 +6,6 @@ * Copyright (c) 2005 Richard Purdie * * Based on Sharp's 2.4 kernel patches/lubbock.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -572,7 +568,7 @@ static struct spi_board_info spitz_spi_devices[] = { }, }; -static struct pxa2xx_spi_master spitz_spi_info = { +static struct pxa2xx_spi_controller spitz_spi_info = { .num_chipselect = 3, }; diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 4e64a140252e..25a1f8c5a738 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Battery and Power Management code for the Sharp SL-Cxx00 * * Copyright (c) 2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/module.h> diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index e0d6c872270a..e2353f7dcf01 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/stargate2.c * @@ -6,10 +7,6 @@ * Copyright: Intel Corp. * * Modified 2009: Jonathan Cameron <jic23@cam.ac.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> @@ -337,15 +334,15 @@ static struct platform_device stargate2_flash_device = { .num_resources = 1, }; -static struct pxa2xx_spi_master pxa_ssp_master_0_info = { +static struct pxa2xx_spi_controller pxa_ssp_master_0_info = { .num_chipselect = 1, }; -static struct pxa2xx_spi_master pxa_ssp_master_1_info = { +static struct pxa2xx_spi_controller pxa_ssp_master_1_info = { .num_chipselect = 1, }; -static struct pxa2xx_spi_master pxa_ssp_master_2_info = { +static struct pxa2xx_spi_controller pxa_ssp_master_2_info = { .num_chipselect = 1, }; diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 4b38e821ac9c..93466fa3b0fe 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/tavorevb.c * * Support for the Marvell PXA930 Evaluation Board * * Copyright (C) 2007-2008 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c index 83606087edc7..c9541632b8b1 100644 --- a/arch/arm/mach-pxa/tosa-bt.c +++ b/arch/arm/mach-pxa/tosa-bt.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Bluetooth built-in chip control * * Copyright (c) 2008 Dmitry Baryshkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index e8a93c088c35..f537ff1c3ba7 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for Sharp SL-C6000x PDAs * Model: (Tosa) @@ -5,11 +6,6 @@ * Copyright (c) 2005 Dirk Opfer * * Based on code written by Sharp/Lineo for 2.4 kernels - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/clkdev.h> @@ -813,7 +809,7 @@ static struct platform_device tosa_bt_device = { .dev.platform_data = &tosa_bt_data, }; -static struct pxa2xx_spi_master pxa_ssp_master_info = { +static struct pxa2xx_spi_controller pxa_ssp_master_info = { .num_chipselect = 1, }; diff --git a/arch/arm/mach-pxa/tosa_bt.h b/arch/arm/mach-pxa/tosa_bt.h index efc3c3d3b75d..56acd5dabec4 100644 --- a/arch/arm/mach-pxa/tosa_bt.h +++ b/arch/arm/mach-pxa/tosa_bt.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Tosa bluetooth built-in chip control. * * Later it may be shared with some other platforms. * * Copyright (c) 2008 Dmitry Baryshkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef TOSA_BT_H #define TOSA_BT_H diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index c76f1daecfc9..f76f8be09554 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/trizeps4.c * @@ -6,10 +7,6 @@ * Author: Jürgen Schindele * Created: 20 02, 2006 * Copyright: Jürgen Schindele - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> @@ -35,7 +32,7 @@ #include <asm/memory.h> #include <asm/mach-types.h> #include <asm/irq.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index ab2f89266bbd..c06031da6676 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/viper.c * @@ -14,10 +15,6 @@ * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/types.h> @@ -58,7 +55,7 @@ #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <asm/system_info.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/viper.h b/arch/arm/mach-pxa/viper.h index 5f5fbf1f6489..5a8b132229dc 100644 --- a/arch/arm/mach-pxa/viper.h +++ b/arch/arm/mach-pxa/viper.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/viper.h * @@ -12,10 +13,6 @@ * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef ARCH_VIPER_H diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 829284406fa3..26a5ebc00069 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hardware definitions for Voipac PXA270 * * Copyright (C) 2010 * Marek Vasut <marek.vasut@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index c368c98584c0..f485146b899f 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* linux/arch/arm/mach-pxa/xcep.c * * Support for the Iskratel Electronics XCEP platform as used in @@ -8,10 +9,6 @@ * Contributions by: Matej Kenda <matej.kenda@i-tech.si> * Created: June 2006 * Copyright: (C) 2006-2009 Instrumentation Technologies - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index e2353e75bb28..900cefc4c5ea 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/z2.c * @@ -7,10 +8,6 @@ * * Based on research and code by: Ken McGuire * Based on mainstone.c as modified for the Zipit Z2. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/platform_device.h> @@ -607,12 +604,12 @@ static struct spi_board_info spi_board_info[] __initdata = { }, }; -static struct pxa2xx_spi_master pxa_ssp1_master_info = { +static struct pxa2xx_spi_controller pxa_ssp1_master_info = { .num_chipselect = 1, .enable_dma = 1, }; -static struct pxa2xx_spi_master pxa_ssp2_master_info = { +static struct pxa2xx_spi_controller pxa_ssp2_master_info = { .num_chipselect = 1, }; diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index c411f79d4cb5..da113c8eefbf 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for the Arcom ZEUS. * @@ -5,10 +6,6 @@ * * Loosely based on Arcom's 2.6.16.28. * Maintained by Marc Zyngier <maz@misterjones.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/cpufreq.h> @@ -391,7 +388,7 @@ static struct platform_device zeus_sram_device = { }; /* SPI interface on SSP3 */ -static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = { +static struct pxa2xx_spi_controller pxa2xx_spi_ssp3_master_info = { .num_chipselect = 1, .enable_dma = 1, }; @@ -426,7 +423,7 @@ static struct gpiod_lookup_table can_regulator_gpiod_table = { .dev_id = "reg-fixed-voltage.0", .table = { GPIO_LOOKUP("gpio-pxa", ZEUS_CAN_SHDN_GPIO, - NULL, GPIO_ACTIVE_HIGH), + NULL, GPIO_ACTIVE_LOW), { }, }, }; @@ -547,7 +544,6 @@ static struct regulator_init_data zeus_ohci_regulator_data = { static struct fixed_voltage_config zeus_ohci_regulator_config = { .supply_name = "vbus2", .microvolts = 5000000, /* 5.0V */ - .enable_high = 1, .startup_delay = 0, .init_data = &zeus_ohci_regulator_data, }; diff --git a/arch/arm/mach-pxa/zeus.h b/arch/arm/mach-pxa/zeus.h index 56024f81d57e..8fa6b2923f63 100644 --- a/arch/arm/mach-pxa/zeus.h +++ b/arch/arm/mach-pxa/zeus.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/zeus.h * @@ -6,10 +7,6 @@ * Copyright: Arcom Control Systems Ltd. * * Maintained by: Marc Zyngier <maz@misterjones.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _MACH_ZEUS_H diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 1f88d7bae849..bf2ab5bd49ec 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/zylonite.c * @@ -7,10 +8,6 @@ * * 2007-09-04: eric miao <eric.miao@marvell.com> * rewrite to align with latest kernel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 8f930a9dd0fd..956fec1c4940 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/zylonite_pxa300.c * @@ -7,10 +8,6 @@ * Copyright (C) 2007 Marvell Internation Ltd. * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 47961ae0c448..94cb834f36cd 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/zylonite_pxa320.c * @@ -7,10 +8,6 @@ * Copyright (C) 2007 Marvell Internation Ltd. * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index 46ed10a807f0..ecbf3c4eb878 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_QCOM bool "Qualcomm Support" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile index 12878e9a2c0c..b839201c9802 100644 --- a/arch/arm/mach-qcom/Makefile +++ b/arch/arm/mach-qcom/Makefile @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c index 5494c9e0c909..630a038f4513 100644 --- a/arch/arm/mach-qcom/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2002 ARM Ltd. * All Rights Reserved * Copyright (c) 2010, Code Aurora Forum. All rights reserved. * Copyright (c) 2014 The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> @@ -46,8 +43,6 @@ extern void secondary_startup_arm(void); -static DEFINE_SPINLOCK(boot_lock); - #ifdef CONFIG_HOTPLUG_CPU static void qcom_cpu_die(unsigned int cpu) { @@ -55,15 +50,6 @@ static void qcom_cpu_die(unsigned int cpu) } #endif -static void qcom_secondary_init(unsigned int cpu) -{ - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - static int scss_release_secondary(unsigned int cpu) { struct device_node *node; @@ -281,24 +267,12 @@ static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int)) } /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* * Send the secondary CPU a soft interrupt, thereby causing * the boot monitor to read the system wide flags register, * and branch to the address found there. */ arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - return ret; } @@ -334,7 +308,6 @@ static void __init qcom_smp_prepare_cpus(unsigned int max_cpus) static const struct smp_operations smp_msm8660_ops __initconst = { .smp_prepare_cpus = qcom_smp_prepare_cpus, - .smp_secondary_init = qcom_secondary_init, .smp_boot_secondary = msm8660_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = qcom_cpu_die, @@ -344,7 +317,6 @@ CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops); static const struct smp_operations qcom_smp_kpssv1_ops __initconst = { .smp_prepare_cpus = qcom_smp_prepare_cpus, - .smp_secondary_init = qcom_secondary_init, .smp_boot_secondary = kpssv1_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = qcom_cpu_die, @@ -354,7 +326,6 @@ CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops) static const struct smp_operations qcom_smp_kpssv2_ops __initconst = { .smp_prepare_cpus = qcom_smp_prepare_cpus, - .smp_secondary_init = qcom_secondary_init, .smp_boot_secondary = kpssv2_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = qcom_cpu_die, diff --git a/arch/arm/mach-rda/Kconfig b/arch/arm/mach-rda/Kconfig index 4df8b8ee1a9d..4d2e4e046cb3 100644 --- a/arch/arm/mach-rda/Kconfig +++ b/arch/arm/mach-rda/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_RDA bool "RDA Micro SoCs" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-rda/Makefile b/arch/arm/mach-rda/Makefile index 6bea3d3a2dd7..f126d00ecd53 100644 --- a/arch/arm/mach-rda/Makefile +++ b/arch/arm/mach-rda/Makefile @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only obj- += dummy.o diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 1d7c83e73ffb..44ebbf9ec673 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_REALVIEW bool "ARM Ltd. RealView family" depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index 6ca6400fa51e..e259091591b8 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel. # diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c index ce331b3dbf54..5ae783767a5d 100644 --- a/arch/arm/mach-realview/platsmp-dt.c +++ b/arch/arm/mach-realview/platsmp-dt.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Linus Walleij - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/smp.h> #include <linux/io.h> diff --git a/arch/arm/mach-realview/realview-dt.c b/arch/arm/mach-realview/realview-dt.c index 88b67247945e..feab66080ba2 100644 --- a/arch/arm/mach-realview/realview-dt.c +++ b/arch/arm/mach-realview/realview-dt.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Linaro Ltd. * * Author: Linus Walleij <linus.walleij@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * */ #include <linux/of_platform.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 8ca926522026..b7855cc665e9 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only config ARCH_ROCKCHIP bool "Rockchip RK2928 and RK3xxx SOCs" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 5c3a9b2de920..62596d5deb88 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS_platsmp.o := -march=armv7-a obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip.o diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h index 492c048813da..fabcaa66607c 100644 --- a/arch/arm/mach-rockchip/core.h +++ b/arch/arm/mach-rockchip/core.h @@ -1,16 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ extern char rockchip_secondary_trampoline; diff --git a/arch/arm/mach-rockchip/headsmp.S b/arch/arm/mach-rockchip/headsmp.S index d69708b07282..37a7ea524a16 100644 --- a/arch/arm/mach-rockchip/headsmp.S +++ b/arch/arm/mach-rockchip/headsmp.S @@ -1,16 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 51984a40b097..909fffee0240 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -1,16 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/delay.h> @@ -245,6 +236,7 @@ static int __init rockchip_smp_prepare_pmu(void) } pmu_base = of_iomap(node, 0); + of_node_put(node); if (!pmu_base) { pr_err("%s: could not map pmu registers\n", __func__); return -ENOMEM; diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c index 0592534e0b88..744b5b332e42 100644 --- a/arch/arm/mach-rockchip/pm.c +++ b/arch/arm/mach-rockchip/pm.c @@ -1,16 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd * Author: Tony Xie <tony.xie@rock-chips.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * */ #include <linux/init.h> @@ -59,7 +50,7 @@ static inline u32 rk3288_l2_config(void) return l2ctlr; } -static void rk3288_config_bootdata(void) +static void __init rk3288_config_bootdata(void) { rkpm_bootdata_cpusp = rk3288_bootram_phy + (SZ_4K - 8); rkpm_bootdata_cpu_code = __pa_symbol(cpu_resume); @@ -230,7 +221,7 @@ static void rk3288_suspend_finish(void) pr_err("%s: Suspend finish failed\n", __func__); } -static int rk3288_suspend_init(struct device_node *np) +static int __init rk3288_suspend_init(struct device_node *np) { struct device_node *sram_np; struct resource res; diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h index b5af26f8336e..479500072312 100644 --- a/arch/arm/mach-rockchip/pm.h +++ b/arch/arm/mach-rockchip/pm.h @@ -1,15 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd * Author: Tony Xie <tony.xie@rock-chips.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. */ #ifndef __MACH_ROCKCHIP_PM_H diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index e41cabc4dc2b..f9797a2b5d0d 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -1,22 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Device Tree support for Rockchip SoCs * * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/of_platform.h> #include <linux/irqchip.h> #include <linux/clk-provider.h> diff --git a/arch/arm/mach-rockchip/sleep.S b/arch/arm/mach-rockchip/sleep.S index 9927f06f52fe..3eca3922c944 100644 --- a/arch/arm/mach-rockchip/sleep.S +++ b/arch/arm/mach-rockchip/sleep.S @@ -1,16 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd * Author: Tony Xie <tony.xie@rock-chips.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * */ #include <linux/linkage.h> diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile index 2ebc6875aeb8..056ef5460290 100644 --- a/arch/arm/mach-rpc/Makefile +++ b/arch/arm/mach-rpc/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel. # diff --git a/arch/arm/mach-rpc/Makefile.boot b/arch/arm/mach-rpc/Makefile.boot index ae2df0d7d037..0ed8e8fbde99 100644 --- a/arch/arm/mach-rpc/Makefile.boot +++ b/arch/arm/mach-rpc/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0x10008000 params_phys-y := 0x10000100 initrd_phys-y := 0x18000000 diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index fb48f3141fb4..488d5c3b37f4 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-rpc/dma.c * * Copyright (C) 1998 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * DMA functions specific to RiscPC architecture */ #include <linux/mman.h> @@ -151,6 +148,12 @@ static void iomd_free_dma(unsigned int chan, dma_t *dma) free_irq(idma->irq, idma); } +static struct device isa_dma_dev = { + .init_name = "fallback device", + .coherent_dma_mask = ~(dma_addr_t)0, + .dma_mask = &isa_dma_dev.coherent_dma_mask, +}; + static void iomd_enable_dma(unsigned int chan, dma_t *dma) { struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma); @@ -168,7 +171,7 @@ static void iomd_enable_dma(unsigned int chan, dma_t *dma) idma->dma.sg = &idma->dma.buf; idma->dma.sgcount = 1; idma->dma.buf.length = idma->dma.count; - idma->dma.buf.dma_address = dma_map_single(NULL, + idma->dma.buf.dma_address = dma_map_single(&isa_dma_dev, idma->dma.addr, idma->dma.count, idma->dma.dma_mode == DMA_MODE_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE); diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c index 04b2f22c2739..cf0593bc42d2 100644 --- a/arch/arm/mach-rpc/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/kernel/ecard.c * * Copyright 1995-2001 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Find all installed expansion cards, and handle interrupts from them. * * Created from information from Acorns RiscOS3 PRMs diff --git a/arch/arm/mach-rpc/ecard.h b/arch/arm/mach-rpc/ecard.h index 4642d436be2a..873dd3d9f274 100644 --- a/arch/arm/mach-rpc/ecard.h +++ b/arch/arm/mach-rpc/ecard.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * ecard.h * * Copyright 2007 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* Definitions internal to ecard.c - for it's use only!! diff --git a/arch/arm/mach-rpc/include/mach/acornfb.h b/arch/arm/mach-rpc/include/mach/acornfb.h index 395d76288ffe..2bf18ab3d699 100644 --- a/arch/arm/mach-rpc/include/mach/acornfb.h +++ b/arch/arm/mach-rpc/include/mach/acornfb.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-rpc/include/mach/acornfb.h * * Copyright (C) 1999 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * AcornFB architecture specific code */ diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h index 622d4e5df029..6f197706f979 100644 --- a/arch/arm/mach-rpc/include/mach/hardware.h +++ b/arch/arm/mach-rpc/include/mach/hardware.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-rpc/include/mach/hardware.h * * Copyright (C) 1996-1999 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This file contains the hardware definitions of the RiscPC series machines. */ #ifndef __ASM_ARCH_HARDWARE_H diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h index 707071a7ea4e..8a8f28406691 100644 --- a/arch/arm/mach-rpc/include/mach/io.h +++ b/arch/arm/mach-rpc/include/mach/io.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-rpc/include/mach/io.h * * Copyright (C) 1997 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Modifications: * 06-Dec-1997 RMK Created. */ diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h index 6868e178274d..0c3428fd9729 100644 --- a/arch/arm/mach-rpc/include/mach/irqs.h +++ b/arch/arm/mach-rpc/include/mach/irqs.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-rpc/include/mach/irqs.h * * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define IRQ_PRINTER 0 diff --git a/arch/arm/mach-rpc/include/mach/isa-dma.h b/arch/arm/mach-rpc/include/mach/isa-dma.h index 67bfc6719c34..d9c3af1ef718 100644 --- a/arch/arm/mach-rpc/include/mach/isa-dma.h +++ b/arch/arm/mach-rpc/include/mach/isa-dma.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-rpc/include/mach/isa-dma.h * * Copyright (C) 1997 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h index b7e49571417d..a586eb31b18d 100644 --- a/arch/arm/mach-rpc/include/mach/memory.h +++ b/arch/arm/mach-rpc/include/mach/memory.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-rpc/include/mach/memory.h * * Copyright (C) 1996,1997,1998 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Changelog: * 20-Oct-1996 RMK Created * 31-Dec-1997 RMK Fixed definitions to reduce warnings diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h index 654a6f3f2547..a023b5f9bbbb 100644 --- a/arch/arm/mach-rpc/include/mach/uncompress.h +++ b/arch/arm/mach-rpc/include/mach/uncompress.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-rpc/include/mach/uncompress.h * * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define VIDMEM ((char *)SCREEN_START) diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 09d602b10d57..0ce56ad754ce 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-rpc/riscpc.c * * Copyright (C) 1998-2001 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Architecture specific fixups. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c index 2689771c1d38..e97f93a0af1d 100644 --- a/arch/arm/mach-rpc/time.c +++ b/arch/arm/mach-rpc/time.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/common/time-acorn.c * * Copyright (c) 1996-2000 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Changelog: * 24-Sep-1996 RMK Created * 10-Oct-1996 RMK Brought up to date with arch-sa110eval diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h index 1b2975708e3f..f28ac6c78d82 100644 --- a/arch/arm/mach-s3c24xx/include/mach/hardware.h +++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h @@ -15,7 +15,7 @@ extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg); #endif /* __ASSEMBLY__ */ -#include <asm/sizes.h> +#include <linux/sizes.h> #include <mach/map.h> #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c index 058ce73137e8..5d819b6ea428 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c +++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c @@ -65,16 +65,16 @@ static int osiris_dvs_notify(struct notifier_block *nb, switch (val) { case CPUFREQ_PRECHANGE: - if (old_dvs & !new_dvs || - cur_dvs & !new_dvs) { + if ((old_dvs && !new_dvs) || + (cur_dvs && !new_dvs)) { pr_debug("%s: exiting dvs\n", __func__); cur_dvs = false; gpio_set_value(OSIRIS_GPIO_DVS, 1); } break; case CPUFREQ_POSTCHANGE: - if (!old_dvs & new_dvs || - !cur_dvs & new_dvs) { + if ((!old_dvs && new_dvs) || + (!cur_dvs && new_dvs)) { pr_debug("entering dvs\n"); cur_dvs = true; gpio_set_value(OSIRIS_GPIO_DVS, 0); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 76c4855a03bc..937d0a83f8fd 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -328,6 +328,8 @@ static const struct { int num_i2c_devs; const struct spi_board_info *spi_devs; int num_spi_devs; + + struct gpiod_lookup_table *gpiod_table; } gf_mods[] = { { .id = 0x01, .rev = 0xff, .name = "1250-EV1 Springbank" }, { .id = 0x02, .rev = 0xff, .name = "1251-EV1 Jura" }, @@ -362,13 +364,16 @@ static const struct { .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) }, { .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" }, { .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill", - .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) }, + .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs), + .gpiod_table = &wm8994_gpiod_table }, { .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut", .spi_devs = wm5102_reva_spi_devs, - .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs) }, + .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs), + .gpiod_table = &wm5102_reva_gpiod_table }, { .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut", .spi_devs = wm5102_spi_devs, - .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) }, + .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs), + .gpiod_table = &wm5102_gpiod_table }, { .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1", .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) }, }; @@ -408,6 +413,9 @@ static int wlf_gf_module_probe(struct i2c_client *i2c, spi_register_board_info(gf_mods[i].spi_devs, gf_mods[i].num_spi_devs); + + if (gf_mods[i].gpiod_table) + gpiod_add_lookup_table(gf_mods[i].gpiod_table); } else { dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n", id, rev + 1); diff --git a/arch/arm/mach-s3c64xx/regs-sys.h b/arch/arm/mach-s3c64xx/regs-sys.h index 8c411fbb0cd9..3687325e2bb4 100644 --- a/arch/arm/mach-s3c64xx/regs-sys.h +++ b/arch/arm/mach-s3c64xx/regs-sys.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -5,10 +6,6 @@ * http://armlinux.simtec.co.uk/ * * S3C64XX system register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __MACH_S3C64XX_REGS_SYS_H diff --git a/arch/arm/mach-s3c64xx/regs-syscon-power.h b/arch/arm/mach-s3c64xx/regs-syscon-power.h index 6e16b3404da9..a35811cc656e 100644 --- a/arch/arm/mach-s3c64xx/regs-syscon-power.h +++ b/arch/arm/mach-s3c64xx/regs-syscon-power.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -5,10 +6,6 @@ * Ben Dooks <ben@simtec.co.uk> * * S3C64XX - syscon power and sleep control registers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __MACH_S3C64XX_REGS_SYSCON_POWER_H diff --git a/arch/arm/mach-s3c64xx/regs-usb-hsotg-phy.h b/arch/arm/mach-s3c64xx/regs-usb-hsotg-phy.h index eae3c311e590..deb1dd2d9c83 100644 --- a/arch/arm/mach-s3c64xx/regs-usb-hsotg-phy.h +++ b/arch/arm/mach-s3c64xx/regs-usb-hsotg-phy.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -5,10 +6,6 @@ * Ben Dooks <ben@simtec.co.uk> * * S3C - USB2.0 Highspeed/OtG device PHY registers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* Note, this is a separate header file as some of the clock framework diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index ce41c6708a83..66e79fa9ba2b 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only if ARCH_SA1100 menu "SA11x0 Implementations" diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot index f7951aa04562..9d8246f2cab4 100644 --- a/arch/arm/mach-sa1100/Makefile.boot +++ b/arch/arm/mach-sa1100/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only ifeq ($(CONFIG_SA1111),y) zreladdr-y += 0xc0208000 else diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index dfa42496ec27..dd8d13fb8450 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-sa1100/assabet.c * * Author: Nicolas Pitre * * This file contains all Assabet-specific tweaks. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/kernel.h> @@ -469,7 +466,6 @@ static struct regulator_consumer_supply assabet_cf_vcc_consumers[] = { static struct fixed_voltage_config assabet_cf_vcc_pdata __initdata = { .supply_name = "cf-power", .microvolts = 3300000, - .enable_high = 1, }; static struct gpiod_lookup_table assabet_cf_vcc_gpio_table = { diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index 63361b6d04e9..bc0e0e24ecb7 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-sa1100/badge4.c * @@ -7,11 +8,6 @@ * Christopher Hoover <ch@hpl.hp.com> * * Copyright (C) 2002 Hewlett-Packard Company - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/module.h> #include <linux/init.h> diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 88e526561a24..f9243a3fd69c 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-sa1100/cerf.c * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Apr-2003 : Removed some old PDA crud [FB] * Oct-2003 : Added uart2 resource [FB] * Jan-2004 : Removed io map for flash [FB] diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 755290bf658b..4dfb7554649d 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-sa1100/generic.c * * Author: Nicolas Pitre * * Code common to all SA11x0 machines. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/gpio.h> #include <linux/gpio/machine.h> diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index 9dc5bcb7326b..51eaeeaf3f10 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for Compaq iPAQ H3100 handheld computer * * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks) * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/init.h> diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 118338efd790..baf529117b26 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for Compaq iPAQ H3600 handheld computer * * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks) * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/init.h> diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index 36a78b0c106f..e93e3a1d60d5 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -1,13 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Support for Compaq iPAQ H3100 and H3600 handheld computers (common code) * * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks) * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/kernel.h> diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index 643d5f2d9af9..4f4c1bb890e0 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-sa1100/hackkit.c * @@ -5,11 +6,6 @@ * * This file contains all HackKit tweaks. Based on original work from * Nicolas Pitre's assabet fixes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/init.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-sa1100/include/mach/badge4.h b/arch/arm/mach-sa1100/include/mach/badge4.h index 44d2e1bfc04b..90e744a54ed5 100644 --- a/arch/arm/mach-sa1100/include/mach/badge4.h +++ b/arch/arm/mach-sa1100/include/mach/badge4.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-sa1100/include/mach/badge4.h * @@ -5,11 +6,6 @@ * Christopher Hoover <ch@hpl.hp.com> * * Copyright (C) 2002 Hewlett-Packard Company - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __ASM_ARCH_HARDWARE_H diff --git a/arch/arm/mach-sa1100/include/mach/cerf.h b/arch/arm/mach-sa1100/include/mach/cerf.h index 88fd9c006ce0..59c185ebd494 100644 --- a/arch/arm/mach-sa1100/include/mach/cerf.h +++ b/arch/arm/mach-sa1100/include/mach/cerf.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-sa1100/include/mach/cerf.h * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Apr-2003 : Removed some old PDA crud [FB] */ #ifndef _INCLUDE_CERF_H_ diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h index 603d4343f7f6..0ee2578e0006 100644 --- a/arch/arm/mach-sa1100/include/mach/h3xxx.h +++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Definitions for Compaq iPAQ H3100 and H3600 handheld computers * * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks) * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _INCLUDE_H3XXX_H_ diff --git a/arch/arm/mach-sa1100/include/mach/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h index cc6b4bfcecf6..bb22fcab8c6c 100644 --- a/arch/arm/mach-sa1100/include/mach/jornada720.h +++ b/arch/arm/mach-sa1100/include/mach/jornada720.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-sa1100/include/mach/jornada720.h * @@ -5,11 +6,6 @@ * * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> * Copyright 2000 John Ankcorn <jca@lcs.mit.edu> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ /* HP Jornada 7xx microprocessor commands */ diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h index fa5cf4744992..3b19296f5062 100644 --- a/arch/arm/mach-sa1100/include/mach/memory.h +++ b/arch/arm/mach-sa1100/include/mach/memory.h @@ -8,7 +8,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#include <asm/sizes.h> +#include <linux/sizes.h> /* * Because of the wide memory address space between physical RAM banks on the diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h index cb76096a2e36..85e6a79112d2 100644 --- a/arch/arm/mach-sa1100/include/mach/mtd-xip.h +++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * MTD primitives for XIP support. Architecture specific functions * @@ -6,10 +7,6 @@ * Author: Nicolas Pitre * Created: Nov 2, 2004 * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_SA1100_MTD_XIP_H__ diff --git a/arch/arm/mach-sa1100/include/mach/nanoengine.h b/arch/arm/mach-sa1100/include/mach/nanoengine.h index 5ebd469a31f2..8d5ee1438956 100644 --- a/arch/arm/mach-sa1100/include/mach/nanoengine.h +++ b/arch/arm/mach-sa1100/include/mach/nanoengine.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-sa1100/include/mach/nanoengine.h * @@ -5,11 +6,6 @@ * Only include this file from SA1100-specific files. * * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __ASM_ARCH_NANOENGINE_H #define __ASM_ARCH_NANOENGINE_H diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 6298bad09ef3..e259298d9465 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-sa1100/jornada720.c * @@ -6,11 +7,6 @@ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl> * Copyright (C) 2005 Michael Gernoth <michael@gernoth.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/init.h> diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 7fc11a3c17b4..1dbe98948ce3 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /** * arch/arm/mac-sa1100/jornada720_ssp.c * * Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * SSP driver for the HP Jornada 710/720/728 */ diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c index 4d35258a7b32..f6c9c19c39fb 100644 --- a/arch/arm/mach-sa1100/nanoengine.c +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -1,14 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-sa1100/nanoengine.c * * Bright Star Engineering's nanoEngine board init code. * * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/init.h> diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index eb60a71cf125..a671e4c994cf 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -21,7 +21,7 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/hardware/sa1111.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #include <mach/hardware.h> #include <mach/assabet.h> diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index d7ae8d50f6d8..0791d11ff4d4 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -1,23 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * linux/arch/arm/mach-sa1100/pci-nanoengine.c * * PCI functions for BSE nanoEngine PCI * * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> #include <linux/irq.h> diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 406487e76a5c..c7fb9a73e4c5 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -18,7 +18,6 @@ #include <linux/mtd/partitions.h> #include <linux/io.h> #include <linux/gpio/driver.h> -#include <linux/gpio/machine.h> #include <mach/hardware.h> #include <asm/setup.h> diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c index e22fca9ad5ec..613fd767afcf 100644 --- a/arch/arm/mach-sa1100/ssp.c +++ b/arch/arm/mach-sa1100/ssp.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-sa1100/ssp.c * * Copyright (C) 2003 Russell King. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Generic SSP driver. This provides the generic core for simple * IO-based SSP applications. */ diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c index 8c2a20591524..e84599dd96f1 100644 --- a/arch/arm/mach-shmobile/pm-rcar-gen2.c +++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c @@ -72,6 +72,7 @@ void __init rcar_gen2_pm_init(void) } error = of_address_to_resource(np, 0, &res); + of_node_put(np); if (error) { pr_err("Failed to get smp-sram address: %d\n", error); return; diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c index 8e50daa99151..ee949255ced3 100644 --- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * R-Car Generation 2 da9063/da9210 regulator quirk + * R-Car Generation 2 da9063(L)/da9210 regulator quirk * * Certain Gen2 development boards have an da9063 and one or more da9210 * regulators. All of these regulators have their interrupt request lines @@ -40,6 +40,7 @@ struct regulator_quirk { struct list_head list; const struct of_device_id *id; + struct device_node *np; struct of_phandle_args irq_args; struct i2c_msg i2c_msg; bool shared; /* IRQ line is shared */ @@ -64,6 +65,7 @@ static struct i2c_msg da9210_msg = { static const struct of_device_id rcar_gen2_quirk_match[] = { { .compatible = "dlg,da9063", .data = &da9063_msg }, + { .compatible = "dlg,da9063l", .data = &da9063_msg }, { .compatible = "dlg,da9210", .data = &da9210_msg }, {}, }; @@ -101,6 +103,9 @@ static int regulator_quirk_notify(struct notifier_block *nb, if (!pos->shared) continue; + if (pos->np->parent != client->dev.parent->of_node) + continue; + dev_info(&client->dev, "clearing %s@0x%02x interrupts\n", pos->id->compatible, pos->i2c_msg.addr); @@ -143,6 +148,7 @@ static int __init rcar_gen2_regulator_quirk(void) if (!of_machine_is_compatible("renesas,koelsch") && !of_machine_is_compatible("renesas,lager") && + !of_machine_is_compatible("renesas,porter") && !of_machine_is_compatible("renesas,stout") && !of_machine_is_compatible("renesas,gose")) return -ENODEV; @@ -165,6 +171,7 @@ static int __init rcar_gen2_regulator_quirk(void) memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg)); quirk->id = id; + quirk->np = np; quirk->i2c_msg.addr = addr; ret = of_irq_parse_one(np, 0, argsa); @@ -205,7 +212,7 @@ static int __init rcar_gen2_regulator_quirk(void) goto err_free; } - pr_info("IRQ2 is asserted, installing da9063/da9210 regulator quirk\n"); + pr_info("IRQ2 is asserted, installing regulator quirk\n"); bus_register_notifier(&i2c_bus_type, ®ulator_quirk_nb); return 0; diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index cc1745e6c60a..22af5e308db6 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_SOCFPGA bool "Altera SOCFPGA family" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 92cae0a9213f..fc2608b18a0d 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -1,20 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2012 Pavel Machek <pavel@denx.de> * Copyright (C) 2012-2015 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __MACH_CORE_H diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S index c160fa3007e9..54f1844eac03 100644 --- a/arch/arm/mach-socfpga/headsmp.S +++ b/arch/arm/mach-socfpga/headsmp.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2003 ARM Limited * Copyright (c) u-boot contributors * Copyright (c) 2012 Pavel Machek <pavel@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/mach-socfpga/l2_cache.c b/arch/arm/mach-socfpga/l2_cache.c index bb359d727b34..99fb95361590 100644 --- a/arch/arm/mach-socfpga/l2_cache.c +++ b/arch/arm/mach-socfpga/l2_cache.c @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright Altera Corporation (C) 2016. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/io.h> #include <linux/of_platform.h> diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c index 10d673252395..b4d397e834a0 100644 --- a/arch/arm/mach-socfpga/ocram.c +++ b/arch/arm/mach-socfpga/ocram.c @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright Altera Corporation (C) 2016. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 0ee76772b507..fbb80b883e5d 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2010-2011 Calxeda, Inc. * Copyright 2012 Pavel Machek <pavel@denx.de> * Based on platsmp.c, Copyright (C) 2002 ARM Ltd. * Copyright (C) 2012 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/delay.h> #include <linux/init.h> diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c index d4866788702c..6ed887cf8dc9 100644 --- a/arch/arm/mach-socfpga/pm.c +++ b/arch/arm/mach-socfpga/pm.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-socfpga/pm.c * @@ -6,18 +7,6 @@ * with code from pm-imx6.c * Copyright 2011-2014 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/bitops.h> diff --git a/arch/arm/mach-socfpga/self-refresh.S b/arch/arm/mach-socfpga/self-refresh.S index f2d7f883e33d..649f2779053d 100644 --- a/arch/arm/mach-socfpga/self-refresh.S +++ b/arch/arm/mach-socfpga/self-refresh.S @@ -1,17 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2014-2015 Altera Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/linkage.h> #include <asm/assembler.h> diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index afd98971d903..47ebcc8a5085 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -1,24 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2012-2015 Altera Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/reboot.h> +#include <linux/reset/socfpga.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> @@ -32,8 +21,6 @@ void __iomem *rst_manager_base_addr; void __iomem *sdr_ctl_base_addr; unsigned long socfpga_cpu1start_addr; -extern void __init socfpga_reset_init(void); - static void __init socfpga_sysmgr_init(void) { struct device_node *np; diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index 1b6cae5e78f4..20e284563a80 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # SPEAr Platform configuration file # diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h index 909b97c0b237..25b4c5e66e39 100644 --- a/arch/arm/mach-spear/generic.h +++ b/arch/arm/mach-spear/generic.h @@ -20,6 +20,8 @@ #include <asm/mach/time.h> +extern volatile int spear_pen_release; + extern void spear13xx_timer_init(void); extern void spear3xx_timer_init(void); extern struct pl022_ssp_controller pl022_plat_data; diff --git a/arch/arm/mach-spear/headsmp.S b/arch/arm/mach-spear/headsmp.S index c52192dc3d9f..96f89436ccf6 100644 --- a/arch/arm/mach-spear/headsmp.S +++ b/arch/arm/mach-spear/headsmp.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-spear13XX/headsmp.S * * Picked from realview * Copyright (c) 2012 ST Microelectronics Limited * Shiraz Hashim <shiraz.linux.kernel@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> @@ -43,5 +40,5 @@ pen: ldr r7, [r6] .align 1: .long . - .long pen_release + .long spear_pen_release ENDPROC(spear13xx_secondary_startup) diff --git a/arch/arm/mach-spear/hotplug.c b/arch/arm/mach-spear/hotplug.c index 12edd1cf8a12..82a83c3cffdf 100644 --- a/arch/arm/mach-spear/hotplug.c +++ b/arch/arm/mach-spear/hotplug.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-spear13xx/hotplug.c * @@ -5,10 +6,6 @@ * Deepak Sikri <deepak.sikri@st.com> * * based upon linux/arch/arm/mach-realview/hotplug.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/errno.h> @@ -16,6 +13,8 @@ #include <asm/cp15.h> #include <asm/smp_plat.h> +#include "generic.h" + static inline void cpu_enter_lowpower(void) { unsigned int v; @@ -57,7 +56,7 @@ static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious) for (;;) { wfi(); - if (pen_release == cpu) { + if (spear_pen_release == cpu) { /* * OK, proper wakeup, we're done */ diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c index 39038a03836a..e33a85c28c95 100644 --- a/arch/arm/mach-spear/platsmp.c +++ b/arch/arm/mach-spear/platsmp.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-spear13xx/platsmp.c * @@ -5,10 +6,6 @@ * * Copyright (C) 2012 ST Microelectronics Ltd. * Shiraz Hashim <shiraz.linux.kernel@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/delay.h> @@ -20,16 +17,21 @@ #include <mach/spear.h> #include "generic.h" +/* XXX spear_pen_release is cargo culted code - DO NOT COPY XXX */ +volatile int spear_pen_release = -1; + /* - * Write pen_release in a way that is guaranteed to be visible to all - * observers, irrespective of whether they're taking part in coherency + * XXX CARGO CULTED CODE - DO NOT COPY XXX + * + * Write spear_pen_release in a way that is guaranteed to be visible to + * all observers, irrespective of whether they're taking part in coherency * or not. This is necessary for the hotplug code to work reliably. */ -static void write_pen_release(int val) +static void spear_write_pen_release(int val) { - pen_release = val; + spear_pen_release = val; smp_wmb(); - sync_cache_w(&pen_release); + sync_cache_w(&spear_pen_release); } static DEFINE_SPINLOCK(boot_lock); @@ -42,7 +44,7 @@ static void spear13xx_secondary_init(unsigned int cpu) * let the primary processor know we're out of the * pen, then head off into the C entry point */ - write_pen_release(-1); + spear_write_pen_release(-1); /* * Synchronise with the boot thread. @@ -64,17 +66,17 @@ static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle) /* * The secondary processor is waiting to be released from * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. + * that it has been released by resetting spear_pen_release. * - * Note that "pen_release" is the hardware CPU ID, whereas + * Note that "spear_pen_release" is the hardware CPU ID, whereas * "cpu" is Linux's internal ID. */ - write_pen_release(cpu); + spear_write_pen_release(cpu); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { smp_rmb(); - if (pen_release == -1) + if (spear_pen_release == -1) break; udelay(10); @@ -86,7 +88,7 @@ static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle) */ spin_unlock(&boot_lock); - return pen_release != -1 ? -ENOSYS : 0; + return spear_pen_release != -1 ? -ENOSYS : 0; } /* diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index f8eeeffddaff..b2d45cf10a3c 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_STI bool "STMicroelectronics Consumer Electronics SOCs" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-sti/Makefile b/arch/arm/mach-sti/Makefile index f85ff059cfba..7e2a58257401 100644 --- a/arch/arm/mach-sti/Makefile +++ b/arch/arm/mach-sti/Makefile @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_ARCH_STI) += board-dt.o diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index e04cd1b201bb..dcb98937fcf5 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2013 STMicroelectronics (R&D) Limited. * Author(s): Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/irq.h> diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c index d0272a839ffb..e2ba04b562be 100644 --- a/arch/arm/mach-sti/platsmp.c +++ b/arch/arm/mach-sti/platsmp.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-sti/platsmp.c * @@ -8,10 +9,6 @@ * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/errno.h> diff --git a/arch/arm/mach-sti/smp.h b/arch/arm/mach-sti/smp.h index d8a2f8758490..23e929d83a14 100644 --- a/arch/arm/mach-sti/smp.h +++ b/arch/arm/mach-sti/smp.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-sti/smp.h * * Copyright (C) 2013 STMicroelectronics (R&D) Limited. * http://www.st.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __MACH_STI_SMP_H diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig index 713c068b953f..36e6c68c0b57 100644 --- a/arch/arm/mach-stm32/Kconfig +++ b/arch/arm/mach-stm32/Kconfig @@ -1,9 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_STM32 bool "STMicroelectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7 select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 select ARM_GIC if ARCH_MULTI_V7 select ARM_PSCI if ARCH_MULTI_V7 + select ARM_AMBA select ARCH_HAS_RESET_CONTROLLER select CLKSRC_STM32 select PINCTRL @@ -18,22 +20,18 @@ if ARM_SINGLE_ARMV7M config MACH_STM32F429 bool "STMicroelectronics STM32F429" - select ARM_AMBA default y config MACH_STM32F469 bool "STMicroelectronics STM32F469" - select ARM_AMBA default y config MACH_STM32F746 bool "STMicroelectronics STM32F746" - select ARM_AMBA default y config MACH_STM32F769 bool "STMicroelectronics STM32F769" - select ARM_AMBA default y config MACH_STM32H743 diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile index bd0b7b5d6e9d..c80d80c199d3 100644 --- a/arch/arm/mach-stm32/Makefile +++ b/arch/arm/mach-stm32/Makefile @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-y += board-dt.o diff --git a/arch/arm/mach-stm32/Makefile.boot b/arch/arm/mach-stm32/Makefile.boot index eacfc3f5c33e..cec195d4fcba 100644 --- a/arch/arm/mach-stm32/Makefile.boot +++ b/arch/arm/mach-stm32/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # Empty file waiting for deletion once Makefile.boot isn't needed any more. # Patch waits for application at # http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 7fa6a3d7efd4..eeadb1a4dcfe 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_SUNXI bool "Allwinner SoCs" depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 71429aa85143..146e623c54d3 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS_mc_smp.o += -march=armv7-a obj-$(CONFIG_ARCH_SUNXI) += sunxi.o diff --git a/arch/arm/mach-sunxi/mc_smp.c b/arch/arm/mach-sunxi/mc_smp.c index b4037b603897..239084cf8192 100644 --- a/arch/arm/mach-sunxi/mc_smp.c +++ b/arch/arm/mach-sunxi/mc_smp.c @@ -89,6 +89,7 @@ static bool sunxi_core_is_cortex_a15(unsigned int core, unsigned int cluster) { struct device_node *node; int cpu = cluster * SUNXI_CPUS_PER_CLUSTER + core; + bool is_compatible; node = of_cpu_device_node_get(cpu); @@ -107,7 +108,9 @@ static bool sunxi_core_is_cortex_a15(unsigned int core, unsigned int cluster) return false; } - return of_device_is_compatible(node, "arm,cortex-a15"); + is_compatible = of_device_is_compatible(node, "arm,cortex-a15"); + of_node_put(node); + return is_compatible; } static int sunxi_cpu_power_switch_set(unsigned int cpu, unsigned int cluster, diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c index 8fb5088464db..bdde9ef3aaa9 100644 --- a/arch/arm/mach-sunxi/platsmp.c +++ b/arch/arm/mach-sunxi/platsmp.c @@ -50,6 +50,7 @@ static void __init sun6i_smp_prepare_cpus(unsigned int max_cpus) } prcm_membase = of_iomap(node, 0); + of_node_put(node); if (!prcm_membase) { pr_err("Couldn't map A31 PRCM registers\n"); return; @@ -63,6 +64,7 @@ static void __init sun6i_smp_prepare_cpus(unsigned int max_cpus) } cpucfg_membase = of_iomap(node, 0); + of_node_put(node); if (!cpucfg_membase) pr_err("Couldn't map A31 CPU config registers\n"); @@ -133,6 +135,7 @@ static void __init sun8i_smp_prepare_cpus(unsigned int max_cpus) } prcm_membase = of_iomap(node, 0); + of_node_put(node); if (!prcm_membase) { pr_err("Couldn't map A23 PRCM registers\n"); return; @@ -146,6 +149,7 @@ static void __init sun8i_smp_prepare_cpus(unsigned int max_cpus) } cpucfg_membase = of_iomap(node, 0); + of_node_put(node); if (!cpucfg_membase) pr_err("Couldn't map A23 CPU config registers\n"); diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 8a7f301839c2..933b6930f024 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -14,6 +14,7 @@ #include <linux/clocksource.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/reset/sunxi.h> #include <asm/mach/arch.h> #include <asm/secure_cntvoff.h> @@ -37,7 +38,6 @@ static const char * const sun6i_board_dt_compat[] = { NULL, }; -extern void __init sun6i_reset_init(void); static void __init sun6i_timer_init(void) { of_clk_init(NULL); diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 7f3b83e0d324..3a06ba263e34 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -2,7 +2,7 @@ menuconfig ARCH_TEGRA bool "NVIDIA Tegra" depends on ARCH_MULTI_V7 - select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS + select ARCH_HAS_RESET_CONTROLLER select ARM_AMBA select ARM_GIC select CLKSRC_MMIO @@ -10,8 +10,8 @@ menuconfig ARCH_TEGRA select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select PINCTRL + select PM select PM_OPP - select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER select SOC_BUS select ZONE_DMA if ARM_LPAE diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index ea6bff404161..b5c990a7a5af 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-tegra/board-paz00.c * @@ -5,16 +6,6 @@ * * Based on board-harmony.c * Copyright (C) 2010 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #include <linux/property.h> diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index da90c89296b9..7b3ef0dc9be1 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-tegra/board.h * @@ -7,16 +8,6 @@ * Author: * Colin Cross <ccross@google.com> * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #ifndef __MACH_TEGRA_BOARD_H diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h index 4cc00e993b00..d59387c4df48 100644 --- a/arch/arm/mach-tegra/common.h +++ b/arch/arm/mach-tegra/common.h @@ -1,18 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2011, ARM Ltd. * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __MACH_TEGRA_COMMON_H diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c index e3fbcfedf845..5118f777fd66 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <asm/firmware.h> @@ -21,6 +10,8 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/firmware/trusted_foundations.h> + #include <asm/cpuidle.h> #include <asm/smp_plat.h> #include <asm/suspend.h> @@ -46,7 +37,7 @@ static int tegra114_idle_power_down(struct cpuidle_device *dev, tegra_set_cpu_in_lp2(); cpu_pm_enter(); - call_firmware_op(prepare_idle); + call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2); /* Do suspend by ourselves if the firmware does not implement it */ if (call_firmware_op(do_idle, 0) == -ENOSYS) diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 3f24addd7972..2447427cb4a8 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * CPU idle driver for Tegra CPUs * @@ -7,16 +8,6 @@ * Gary King <gking@nvidia.com> * * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. */ #include <linux/clk/tegra.h> @@ -61,7 +52,8 @@ static struct cpuidle_driver tegra_idle_driver = { .exit_latency = 5000, .target_residency = 10000, .power_usage = 0, - .flags = CPUIDLE_FLAG_COUPLED, + .flags = CPUIDLE_FLAG_COUPLED | + CPUIDLE_FLAG_TIMER_STOP, .name = "powered-down", .desc = "CPU power gated", }, @@ -136,12 +128,8 @@ static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev, if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready()) return false; - tick_broadcast_enter(); - tegra_idle_lp2_last(); - tick_broadcast_exit(); - if (cpu_online(1)) tegra20_wake_cpu1_from_reset(); @@ -153,14 +141,10 @@ static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - tick_broadcast_enter(); - cpu_suspend(0, tegra20_sleep_cpu_secondary_finish); tegra20_cpu_clear_resettable(); - tick_broadcast_exit(); - return true; } #else diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index c1417361e10e..c6128526877d 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * CPU idle driver for Tegra CPUs * @@ -7,16 +8,6 @@ * Gary King <gking@nvidia.com> * * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. */ #include <linux/clk/tegra.h> @@ -56,6 +47,7 @@ static struct cpuidle_driver tegra_idle_driver = { .exit_latency = 2000, .target_residency = 2200, .power_usage = 0, + .flags = CPUIDLE_FLAG_TIMER_STOP, .name = "powered-down", .desc = "CPU power gated", }, @@ -76,12 +68,8 @@ static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, return false; } - tick_broadcast_enter(); - tegra_idle_lp2_last(); - tick_broadcast_exit(); - return true; } @@ -90,14 +78,10 @@ static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - tick_broadcast_enter(); - smp_wmb(); cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - tick_broadcast_exit(); - return true; } #else diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index 316563141add..d565c44cfc93 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-tegra/cpuidle.c * @@ -9,16 +10,6 @@ * Gary King <gking@nvidia.com> * * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h index dd1624d4b294..4e1f459f5bd8 100644 --- a/arch/arm/mach-tegra/cpuidle.h +++ b/arch/arm/mach-tegra/cpuidle.h @@ -1,17 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __MACH_TEGRA_CPUIDLE_H diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index 8ec707826072..5c907c2c04e0 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2002 ARM Ltd. * All Rights Reserved * Copyright (c) 2010, 2012-2013, NVIDIA Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/clk/tegra.h> diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c index 352de159d2c5..afdeb32052b7 100644 --- a/arch/arm/mach-tegra/io.c +++ b/arch/arm/mach-tegra/io.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-tegra/io.c * @@ -6,16 +7,6 @@ * Author: * Colin Cross <ccross@google.com> * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #include <linux/init.h> diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h index 9e5b2f869fc8..160cb18850f2 100644 --- a/arch/arm/mach-tegra/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -1,26 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2010 Google, Inc. * * Author: * Colin Cross <ccross@google.com> * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #ifndef __MACH_TEGRA_IOMAP_H #define __MACH_TEGRA_IOMAP_H #include <asm/pgtable.h> -#include <asm/sizes.h> +#include <linux/sizes.h> #define TEGRA_IRAM_BASE 0x40000000 #define TEGRA_IRAM_SIZE SZ_256K diff --git a/arch/arm/mach-tegra/irammap.h b/arch/arm/mach-tegra/irammap.h index e32e1742c9a1..a945a1c38aa5 100644 --- a/arch/arm/mach-tegra/irammap.h +++ b/arch/arm/mach-tegra/irammap.h @@ -1,23 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __MACH_TEGRA_IRAMMAP_H #define __MACH_TEGRA_IRAMMAP_H -#include <asm/sizes.h> +#include <linux/sizes.h> /* The first 1K of IRAM is permanently reserved for the CPU reset handler */ #define TEGRA_IRAM_RESET_HANDLER_OFFSET 0 diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index a186ab663b0b..ace7a390b5fe 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2011 Google, Inc. * @@ -5,16 +6,6 @@ * Colin Cross <ccross@android.com> * * Copyright (C) 2010,2013, NVIDIA Corporation - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #include <linux/cpu_pm.h> diff --git a/arch/arm/mach-tegra/irq.h b/arch/arm/mach-tegra/irq.h index 5142649bba05..7a94cf121448 100644 --- a/arch/arm/mach-tegra/irq.h +++ b/arch/arm/mach-tegra/irq.h @@ -1,17 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __TEGRA_IRQ_H diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index b5a2afe99101..e6911a14c096 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-tegra/platsmp.c * @@ -6,10 +7,6 @@ * * Copyright (C) 2009 Palm * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/clk/tegra.h> diff --git a/arch/arm/mach-tegra/pm-tegra20.c b/arch/arm/mach-tegra/pm-tegra20.c index 39ac2b723f2e..1b4cab81a25c 100644 --- a/arch/arm/mach-tegra/pm-tegra20.c +++ b/arch/arm/mach-tegra/pm-tegra20.c @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-tegra/pm-tegra30.c b/arch/arm/mach-tegra/pm-tegra30.c index 46cc19de9916..e1b0329537fe 100644 --- a/arch/arm/mach-tegra/pm-tegra30.c +++ b/arch/arm/mach-tegra/pm-tegra30.c @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 1ad5719779b0..3cab81b82866 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -1,19 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * CPU complex suspend & resume functions for Tegra SoCs * * Copyright (c) 2009-2012, NVIDIA Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/clk/tegra.h> @@ -27,12 +16,15 @@ #include <linux/spinlock.h> #include <linux/suspend.h> +#include <linux/firmware/trusted_foundations.h> + #include <soc/tegra/flowctrl.h> #include <soc/tegra/fuse.h> #include <soc/tegra/pm.h> #include <soc/tegra/pmc.h> #include <asm/cacheflush.h> +#include <asm/firmware.h> #include <asm/idmap.h> #include <asm/proc-fns.h> #include <asm/smp_plat.h> @@ -159,6 +151,28 @@ int tegra_cpu_do_idle(void) static int tegra_sleep_cpu(unsigned long v2p) { + /* + * L2 cache disabling using kernel API only allowed when all + * secondary CPU's are offline. Cache have to be disabled with + * MMU-on if cache maintenance is done via Trusted Foundations + * firmware. Note that CPUIDLE won't ever enter powergate on Tegra30 + * if any of secondary CPU's is online and this is the LP2-idle + * code-path only for Tegra20/30. + */ + if (trusted_foundations_registered()) + outer_disable(); + + /* + * Note that besides of setting up CPU reset vector this firmware + * call may also do the following, depending on the FW version: + * 1) Disable L2. But this doesn't matter since we already + * disabled the L2. + * 2) Disable D-cache. This need to be taken into account in + * particular by the tegra_disable_clean_inv_dcache() which + * shall avoid the re-disable. + */ + call_firmware_op(prepare_idle, TF_PM_MODE_LP2); + setup_mm_for_reboot(); tegra_sleep_cpu_finish(v2p); @@ -197,6 +211,14 @@ void tegra_idle_lp2_last(void) cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + /* + * Resume L2 cache if it wasn't re-enabled early during resume, + * which is the case for Tegra30 that has to re-enable the cache + * via firmware call. In other cases cache is already enabled and + * hence re-enabling is a no-op. This is always a no-op on Tegra114+. + */ + outer_resume(); + restore_cpu_complex(); cpu_cluster_pm_exit(); } @@ -215,6 +237,15 @@ enum tegra_suspend_mode tegra_pm_validate_suspend_mode( static int tegra_sleep_core(unsigned long v2p) { + /* + * Cache have to be disabled with MMU-on if cache maintenance is done + * via Trusted Foundations firmware. This is a no-op on Tegra114+. + */ + if (trusted_foundations_registered()) + outer_disable(); + + call_firmware_op(prepare_idle, TF_PM_MODE_LP1); + setup_mm_for_reboot(); tegra_sleep_core_finish(v2p); @@ -342,6 +373,14 @@ static int tegra_suspend_enter(suspend_state_t state) cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func); + /* + * Resume L2 cache if it wasn't re-enabled early during resume, + * which is the case for Tegra30 that has to re-enable the cache + * via firmware call. In other cases cache is already enabled and + * hence re-enabling is a no-op. + */ + outer_resume(); + switch (mode) { case TEGRA_SUSPEND_LP1: tegra_suspend_exit_lp1(); diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 717b48f22912..569151b3edc0 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -1,21 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2010 Google, Inc. * Copyright (c) 2010-2012 NVIDIA Corporation. All rights reserved. * * Author: * Colin Cross <ccross@google.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef _MACH_TEGRA_PM_H_ diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 805f306fa6f7..67b763fea005 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -1,17 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/init.h> @@ -20,6 +9,7 @@ #include <soc/tegra/flowctrl.h> #include <soc/tegra/fuse.h> +#include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/cache.h> @@ -29,8 +19,6 @@ #define PMC_SCRATCH41 0x140 -#define RESET_DATA(x) ((TEGRA_RESET_##x)*4) - #ifdef CONFIG_PM_SLEEP /* * tegra_resume @@ -78,6 +66,7 @@ ENTRY(tegra_resume) orr r1, r1, #1 str r1, [r0] #endif + bl tegra_resume_trusted_foundations #ifdef CONFIG_CACHE_L2X0 /* L2 cache resume & re-enable */ @@ -90,6 +79,30 @@ end_ca9_scu_l2_resume: b cpu_resume ENDPROC(tegra_resume) + +/* + * tegra_resume_trusted_foundations + * + * Trusted Foundations firmware initialization. + * + * Doesn't return if firmware presents. + * Corrupted registers: r1, r2 + */ +ENTRY(tegra_resume_trusted_foundations) + /* Check whether Trusted Foundations firmware presents. */ + mov32 r2, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + ldr r1, =__tegra_cpu_reset_handler_data_offset + \ + RESET_DATA(TF_PRESENT) + ldr r1, [r2, r1] + cmp r1, #0 + reteq lr + + .arch_extension sec + /* First call after suspend wakes firmware. No arguments required. */ + smc #0 + + b cpu_resume +ENDPROC(tegra_resume_trusted_foundations) #endif .align L1_CACHE_SHIFT @@ -115,12 +128,19 @@ ENTRY(__tegra_cpu_reset_handler_start) * must be position-independent. */ + .arm .align L1_CACHE_SHIFT ENTRY(__tegra_cpu_reset_handler) cpsid aif, 0x13 @ SVC mode, interrupts disabled tegra_get_soc_id TEGRA_APB_MISC_BASE, r6 + + adr r12, __tegra_cpu_reset_handler_data + ldr r5, [r12, #RESET_DATA(TF_PRESENT)] + cmp r5, #0 + bne after_errata + #ifdef CONFIG_ARCH_TEGRA_2x_SOC t20_check: cmp r6, #TEGRA20 @@ -155,7 +175,6 @@ after_errata: and r10, r10, #0x3 @ R10 = CPU number mov r11, #1 mov r11, r11, lsl r10 @ R11 = CPU mask - adr r12, __tegra_cpu_reset_handler_data #ifdef CONFIG_SMP /* Does the OS know about this CPU? */ @@ -169,10 +188,9 @@ after_errata: cmp r6, #TEGRA20 bne 1f /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ - mov32 r5, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET mov r0, #CPU_NOT_RESETTABLE cmp r10, #0 - strneb r0, [r5, #__tegra20_cpu1_resettable_status_offset] + strbne r0, [r12, #RESET_DATA(RESETTABLE_STATUS)] 1: #endif @@ -277,14 +295,13 @@ ENDPROC(__tegra_cpu_reset_handler) .align L1_CACHE_SHIFT .type __tegra_cpu_reset_handler_data, %object .globl __tegra_cpu_reset_handler_data + .globl __tegra_cpu_reset_handler_data_offset + .equ __tegra_cpu_reset_handler_data_offset, \ + . - __tegra_cpu_reset_handler_start __tegra_cpu_reset_handler_data: - .rept TEGRA_RESET_DATA_SIZE - .long 0 + .rept TEGRA_RESET_DATA_SIZE + .long 0 .endr - .globl __tegra20_cpu1_resettable_status_offset - .equ __tegra20_cpu1_resettable_status_offset, \ - . - __tegra_cpu_reset_handler_start - .byte 0 .align L1_CACHE_SHIFT ENTRY(__tegra_cpu_reset_handler_end) diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index dc558892753c..5a67a71f80cc 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -1,17 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-tegra/reset.c * * Copyright (C) 2011,2012 NVIDIA Corporation. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #include <linux/bitops.h> @@ -19,6 +10,8 @@ #include <linux/init.h> #include <linux/io.h> +#include <linux/firmware/trusted_foundations.h> + #include <soc/tegra/fuse.h> #include <asm/cacheflush.h> @@ -89,6 +82,8 @@ static void __init tegra_cpu_reset_handler_enable(void) void __init tegra_cpu_reset_handler_init(void) { + __tegra_cpu_reset_handler_data[TEGRA_RESET_TF_PRESENT] = + trusted_foundations_registered(); #ifdef CONFIG_SMP __tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] = diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h index 9c479c7925b8..a4cfc08159f6 100644 --- a/arch/arm/mach-tegra/reset.h +++ b/arch/arm/mach-tegra/reset.h @@ -1,19 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-tegra/reset.h * * CPU reset dispatcher. * * Copyright (c) 2011, NVIDIA Corporation. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #ifndef __MACH_TEGRA_RESET_H @@ -25,7 +16,11 @@ #define TEGRA_RESET_STARTUP_SECONDARY 3 #define TEGRA_RESET_STARTUP_LP2 4 #define TEGRA_RESET_STARTUP_LP1 5 -#define TEGRA_RESET_DATA_SIZE 6 +#define TEGRA_RESET_RESETTABLE_STATUS 6 +#define TEGRA_RESET_TF_PRESENT 7 +#define TEGRA_RESET_DATA_SIZE 8 + +#define RESET_DATA(x) ((TEGRA_RESET_##x)*4) #ifndef __ASSEMBLY__ @@ -49,7 +44,8 @@ void __tegra_cpu_reset_handler_end(void); (u32)__tegra_cpu_reset_handler_start))) #define tegra20_cpu1_resettable_status \ (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ - (u32)__tegra20_cpu1_resettable_status_offset)) + ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_RESETTABLE_STATUS] - \ + (u32)__tegra_cpu_reset_handler_start))) #endif #define tegra_cpu_reset_handler_offset \ diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index 5c8e638ee51a..9a89f30d53ca 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -1,21 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved. * Copyright (c) 2011, Google, Inc. * * Author: Colin Cross <ccross@android.com> * Gary King <gking@nvidia.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/linkage.h> @@ -28,11 +17,11 @@ #include <asm/cache.h> #include "irammap.h" +#include "reset.h" #include "sleep.h" #define EMC_CFG 0xc #define EMC_ADR_CFG 0x10 -#define EMC_REFRESH 0x70 #define EMC_NOP 0xdc #define EMC_SELF_REF 0xe0 #define EMC_REQ_CTRL 0x2b0 @@ -54,6 +43,9 @@ #define APB_MISC_XM2CFGCPADCTRL2 0x8e4 #define APB_MISC_XM2CFGDPADCTRL2 0x8e8 +#define __tegra20_cpu1_resettable_status_offset \ + (__tegra_cpu_reset_handler_data_offset + RESET_DATA(RESETTABLE_STATUS)) + .macro pll_enable, rd, r_car_base, pll_base ldr \rd, [\r_car_base, #\pll_base] tst \rd, #(1 << 30) @@ -397,7 +389,6 @@ padload_done: mov r1, #1 str r1, [r0, #EMC_NOP] str r1, [r0, #EMC_NOP] - str r1, [r0, #EMC_REFRESH] emc_device_mask r1, r0 diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index dd4a67dabd91..b408fa56eb89 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -1,17 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/linkage.h> @@ -29,7 +18,6 @@ #define EMC_CFG 0xc #define EMC_ADR_CFG 0x10 #define EMC_TIMING_CONTROL 0x28 -#define EMC_REFRESH 0x70 #define EMC_NOP 0xdc #define EMC_SELF_REF 0xe0 #define EMC_MRW 0xe8 @@ -459,7 +447,6 @@ emc_wait_auto_cal_onetime: cmp r10, #TEGRA30 streq r1, [r0, #EMC_NOP] streq r1, [r0, #EMC_NOP] - streq r1, [r0, #EMC_REFRESH] emc_device_mask r1, r0 @@ -521,6 +508,8 @@ zcal_done: ldr r1, [r5, #0x0] @ restore EMC_CFG str r1, [r0, #EMC_CFG] + emc_timing_update r1, r0 + /* Tegra114 had dual EMC channel, now config the other one */ cmp r10, #TEGRA114 bne __no_dual_emc_chanl diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 5e3496753df1..8f88944831c5 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-tegra/sleep.S * @@ -6,20 +7,6 @@ * * Author: Colin Cross <ccross@android.com> * Gary King <gking@nvidia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include <linux/linkage.h> @@ -49,8 +36,9 @@ ENTRY(tegra_disable_clean_inv_dcache) /* Disable the D-cache */ mrc p15, 0, r2, c1, c0, 0 + tst r2, #CR_C @ see tegra_sleep_cpu() bic r2, r2, #CR_C - mcr p15, 0, r2, c1, c0, 0 + mcrne p15, 0, r2, c1, c0, 0 isb /* Flush the D-cache */ @@ -132,10 +120,13 @@ ENTRY(tegra_shut_off_mmu) #ifdef CONFIG_CACHE_L2X0 /* Disable L2 cache */ check_cpu_part_num 0xc09, r9, r10 - movweq r2, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000) - movteq r2, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000) - moveq r3, #0 - streq r3, [r2, #L2X0_CTRL] + retne r0 + + mov32 r2, TEGRA_ARM_PERIF_BASE + 0x3000 + ldr r3, [r2, #L2X0_CTRL] + tst r3, #L2X0_CTRL_EN @ see tegra_sleep_cpu() + mov r3, #0 + strne r3, [r2, #L2X0_CTRL] #endif ret r0 ENDPROC(tegra_shut_off_mmu) diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 0d59360d891d..78ef32a907c8 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -1,17 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2010-2013, NVIDIA Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __MACH_TEGRA_SLEEP_H diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index f9587be48235..e512e606eabd 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -1,19 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * NVIDIA Tegra SoC device tree board support * * Copyright (C) 2011, 2013, NVIDIA Corporation * Copyright (C) 2010 Secret Lab Technologies, Ltd. * Copyright (C) 2010 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #include <linux/clk.h> @@ -35,15 +26,17 @@ #include <linux/sys_soc.h> #include <linux/usb/tegra_usb_phy.h> +#include <linux/firmware/trusted_foundations.h> + #include <soc/tegra/fuse.h> #include <soc/tegra/pmc.h> +#include <asm/firmware.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach-types.h> #include <asm/setup.h> -#include <asm/trusted_foundations.h> #include "board.h" #include "common.h" @@ -74,6 +67,7 @@ static void __init tegra_init_early(void) { of_register_trusted_foundations(); tegra_cpu_reset_handler_init(); + call_firmware_op(l2x0_init); } static void __init tegra_dt_init_irq(void) diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 5a8804fa8776..67f71ae45dfc 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel, U300 machine. # diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 048f15e8c669..a79fa3b0c8ed 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1,10 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * * arch/arm/mach-u300/core.c * - * * Copyright (C) 2007-2012 ST-Ericsson SA - * License terms: GNU General Public License (GPL) version 2 * Core platform support, IRQ handling and device definitions. * Author: Linus Walleij <linus.walleij@stericsson.com> */ diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c index 595b574c2c50..c0cc1d82e1b9 100644 --- a/arch/arm/mach-u300/regulator.c +++ b/arch/arm/mach-u300/regulator.c @@ -1,8 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-u300/regulator.c * * Copyright (C) 2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 * Handle board-bound regulators and board power not related * to any devices. * Author: Linus Walleij <linus.walleij@stericsson.com> @@ -130,3 +130,5 @@ static int __init u300_init_boardpower(void) } device_initcall(u300_init_boardpower); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Linus Walleij"); diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index a9a3453548f4..5e903241bded 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel, U8500 machine. # diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 389ecf6faa00..9580525102da 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2008-2009 ST-Ericsson SA * * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * */ #include <linux/types.h> #include <linux/init.h> diff --git a/arch/arm/mach-ux500/db8500-regs.h b/arch/arm/mach-ux500/db8500-regs.h index 3d6e1955119a..0d47d7171d9b 100644 --- a/arch/arm/mach-ux500/db8500-regs.h +++ b/arch/arm/mach-ux500/db8500-regs.h @@ -1,7 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 */ #ifndef __MACH_DB8500_REGS_H diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 69c2361ca688..0810f3abd810 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2002 ARM Ltd. * Copyright (C) 2008 STMicroelctronics. @@ -5,10 +6,6 @@ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> * * This file is based on arm realview platform - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/errno.h> diff --git a/arch/arm/mach-ux500/pm.c b/arch/arm/mach-ux500/pm.c index f6c33a0c1c61..ff9c375e4277 100644 --- a/arch/arm/mach-ux500/pm.c +++ b/arch/arm/mach-ux500/pm.c @@ -1,12 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) ST-Ericsson SA 2010-2013 * Author: Rickard Andersson <rickard.andersson@stericsson.com> for * ST-Ericsson. * Author: Daniel Lezcano <daniel.lezcano@linaro.org> for Linaro. * Author: Ulf Hansson <ulf.hansson@linaro.org> for Linaro. - * - * License terms: GNU General Public License (GPL) version 2 - * */ #include <linux/kernel.h> diff --git a/arch/arm/mach-ux500/pm_domains.c b/arch/arm/mach-ux500/pm_domains.c index 4d71c90f801c..427b9ac4af6c 100644 --- a/arch/arm/mach-ux500/pm_domains.c +++ b/arch/arm/mach-ux500/pm_domains.c @@ -1,8 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Linaro Ltd. * * Author: Ulf Hansson <ulf.hansson@linaro.org> - * License terms: GNU General Public License (GPL) version 2 * * Implements PM domains using the generic PM domain for ux500. */ diff --git a/arch/arm/mach-ux500/pm_domains.h b/arch/arm/mach-ux500/pm_domains.h index 263d3ba97177..33c55f2c6b3c 100644 --- a/arch/arm/mach-ux500/pm_domains.h +++ b/arch/arm/mach-ux500/pm_domains.h @@ -1,8 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2014 Linaro Ltd. * * Author: Ulf Hansson <ulf.hansson@linaro.org> - * License terms: GNU General Public License (GPL) version 2 */ #ifndef __MACH_UX500_PM_DOMAINS_H diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile index 41b124b5107b..2b907718d467 100644 --- a/arch/arm/mach-versatile/Makefile +++ b/arch/arm/mach-versatile/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel. # diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index e9d60687e416..0b763239c0f8 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Versatile board support using the device tree * @@ -5,20 +6,6 @@ * Copyright (C) 2009 Jeremy Kerr <jeremy.kerr@canonical.com> * Copyright (C) 2004 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot index eacfc3f5c33e..cec195d4fcba 100644 --- a/arch/arm/mach-vexpress/Makefile.boot +++ b/arch/arm/mach-vexpress/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # Empty file waiting for deletion once Makefile.boot isn't needed any more. # Patch waits for application at # http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c index ee2a0faafaa1..46a903c88c6a 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-vexpress/dcscb.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-vexpress/dcscb.c - Dual Cluster System Configuration Block * * Created by: Nicolas Pitre, May 2012 * Copyright: (C) 2012-2013 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> diff --git a/arch/arm/mach-vexpress/dcscb_setup.S b/arch/arm/mach-vexpress/dcscb_setup.S index 4bb7fbe0f621..0614b2ebd354 100644 --- a/arch/arm/mach-vexpress/dcscb_setup.S +++ b/arch/arm/mach-vexpress/dcscb_setup.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/include/asm/dcscb_setup.S * * Created by: Dave Martin, 2012-06-22 * Copyright: (C) 2012-2013 Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index af0113be5970..99c93124aa68 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-vexpress/platsmp.c * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/errno.h> diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h index 793d065243b9..288569fdfcb9 100644 --- a/arch/arm/mach-vexpress/spc.h +++ b/arch/arm/mach-vexpress/spc.h @@ -1,12 +1,5 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. * * Copyright (C) 2012 ARM Limited */ diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 9b5f3c427086..e96c42ae3602 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-vexpress/tc2_pm.c - TC2 power management support * @@ -6,10 +7,6 @@ * * Some portions of this file were originally written by Achin Gupta * Copyright: (C) 2012 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/delay.h> diff --git a/arch/arm/mach-vexpress/v2m-mps2.c b/arch/arm/mach-vexpress/v2m-mps2.c index e7ad9c27231c..5b50d8e95cd7 100644 --- a/arch/arm/mach-vexpress/v2m-mps2.c +++ b/arch/arm/mach-vexpress/v2m-mps2.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 ARM Limited * * Author: Vladimir Murzin <vladimir.murzin@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <asm/mach/arch.h> diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile index 4c8a84637594..ccf9a3bbdbe3 100644 --- a/arch/arm/mach-vt8500/Makefile +++ b/arch/arm/mach-vt8500/Makefile @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_ARCH_VT8500) += vt8500.o diff --git a/arch/arm/mach-vt8500/Makefile.boot b/arch/arm/mach-vt8500/Makefile.boot index b79c41cdfdff..883985f4b6c1 100644 --- a/arch/arm/mach-vt8500/Makefile.boot +++ b/arch/arm/mach-vt8500/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x01000000 diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 773c04fdb746..0ab40087ae1c 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -1,21 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/mach-vt8500/vt8500.c * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/io.h> diff --git a/arch/arm/mach-w90x900/Makefile.boot b/arch/arm/mach-w90x900/Makefile.boot index 6c3d421c2d11..07d1b3b23ac0 100644 --- a/arch/arm/mach-w90x900/Makefile.boot +++ b/arch/arm/mach-w90x900/Makefile.boot @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only zreladdr-y += 0x00008000 params_phys-y := 0x00000100 diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c index 06d867dce551..b50577a5a840 100644 --- a/arch/arm/mach-w90x900/clksel.c +++ b/arch/arm/mach-w90x900/clksel.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/clksel.c * * Copyright (c) 2008 Nuvoton technology corporation * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. */ #include <linux/module.h> diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c index 3f93fac98d97..df55aa8ce5ff 100644 --- a/arch/arm/mach-w90x900/clock.c +++ b/arch/arm/mach-w90x900/clock.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/clock.c * * Copyright (c) 2008 Nuvoton technology corporation * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. */ #include <linux/module.h> diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h index b88a1b16b2e9..e81c369430b3 100644 --- a/arch/arm/mach-w90x900/clock.h +++ b/arch/arm/mach-w90x900/clock.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mach-w90x900/clock.h * * Copyright (c) 2008 Nuvoton technology corporation * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. */ #include <linux/clkdev.h> diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c index ca763251ffe0..aeaafc2ebb01 100644 --- a/arch/arm/mach-w90x900/cpu.c +++ b/arch/arm/mach-w90x900/cpu.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/cpu.c * @@ -6,11 +7,6 @@ * Wan ZongShun <mcuos.com@gmail.com> * * NUC900 series cpu common support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * */ #include <linux/kernel.h> diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h index f8730b60bd76..a56f36d04bac 100644 --- a/arch/arm/mach-w90x900/cpu.h +++ b/arch/arm/mach-w90x900/cpu.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-w90x900/cpu.h * @@ -9,11 +10,6 @@ * Header file for NUC900 CPU support * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #define IODESC_ENT(y) \ diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index e65a80a1ac75..ce5fe400cb99 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -1,14 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/dev.c * * Copyright (C) 2009 Nuvoton corporation. * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation;version 2 of the License. - * */ #include <linux/kernel.h> diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c index 55d1a00dbd28..cb5df211f1ed 100644 --- a/arch/arm/mach-w90x900/gpio.c +++ b/arch/arm/mach-w90x900/gpio.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/gpio.c * * Generic nuc900 GPIO handling * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/clk.h> diff --git a/arch/arm/mach-w90x900/include/mach/hardware.h b/arch/arm/mach-w90x900/include/mach/hardware.h index fe3c6265a466..137403960483 100644 --- a/arch/arm/mach-w90x900/include/mach/hardware.h +++ b/arch/arm/mach-w90x900/include/mach/hardware.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-w90x900/include/mach/hardware.h * @@ -7,18 +8,12 @@ * Wan ZongShun <mcuos.com@gmail.com> * * Based on arch/arm/mach-s3c2410/include/mach/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * */ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include <asm/sizes.h> +#include <linux/sizes.h> #include <mach/map.h> #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-w90x900/include/mach/irqs.h b/arch/arm/mach-w90x900/include/mach/irqs.h index 9d5cba3a509f..23ea01d97a02 100644 --- a/arch/arm/mach-w90x900/include/mach/irqs.h +++ b/arch/arm/mach-w90x900/include/mach/irqs.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-w90x900/include/mach/irqs.h * @@ -6,11 +7,6 @@ * Wan ZongShun <mcuos.com@gmail.com> * * Based on arch/arm/mach-s3c2410/include/mach/irqs.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * */ #ifndef __ASM_ARCH_IRQS_H diff --git a/arch/arm/mach-w90x900/include/mach/map.h b/arch/arm/mach-w90x900/include/mach/map.h index 1a2095304117..570a74e04b1c 100644 --- a/arch/arm/mach-w90x900/include/mach/map.h +++ b/arch/arm/mach-w90x900/include/mach/map.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-w90x900/include/mach/map.h * @@ -6,11 +7,6 @@ * Wan ZongShun <mcuos.com@gmail.com> * * Based on arch/arm/mach-s3c2410/include/mach/map.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * */ #ifndef __ASM_ARCH_MAP_H diff --git a/arch/arm/mach-w90x900/include/mach/mfp.h b/arch/arm/mach-w90x900/include/mach/mfp.h index 23ef1f573abd..be5485efab0a 100644 --- a/arch/arm/mach-w90x900/include/mach/mfp.h +++ b/arch/arm/mach-w90x900/include/mach/mfp.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-w90x900/include/mach/mfp.h * @@ -6,11 +7,6 @@ * Wan ZongShun <mcuos.com@gmail.com> * * Based on arch/arm/mach-s3c2410/include/mach/map.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * */ #ifndef __ASM_ARCH_MFP_H diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h index 516d6b477b61..f06245d26bd7 100644 --- a/arch/arm/mach-w90x900/include/mach/regs-clock.h +++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-w90x900/include/mach/regs-clock.h * * Copyright (c) 2008 Nuvoton technology corporation. * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * */ #ifndef __ASM_ARCH_REGS_CLOCK_H diff --git a/arch/arm/mach-w90x900/include/mach/regs-irq.h b/arch/arm/mach-w90x900/include/mach/regs-irq.h index 8a3185fbc9cf..89fcbc60b60a 100644 --- a/arch/arm/mach-w90x900/include/mach/regs-irq.h +++ b/arch/arm/mach-w90x900/include/mach/regs-irq.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-w90x900/include/mach/regs-irq.h * @@ -7,12 +8,6 @@ * Wan ZongShun <mcuos.com@gmail.com> * * Based on arch/arm/mach-s3c2410/include/mach/regs-irq.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * */ #ifndef ___ASM_ARCH_REGS_IRQ_H diff --git a/arch/arm/mach-w90x900/include/mach/regs-ldm.h b/arch/arm/mach-w90x900/include/mach/regs-ldm.h index e9d480a5b232..ffe7e67c99de 100644 --- a/arch/arm/mach-w90x900/include/mach/regs-ldm.h +++ b/arch/arm/mach-w90x900/include/mach/regs-ldm.h @@ -1,18 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-w90x900/include/mach/regs-serial.h * * Copyright (c) 2009 Nuvoton technology corporation * All rights reserved. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * * Description: * Nuvoton Display, LCM Register list * Author: Wang Qiang (rurality.linux@gmail.com) 2009/12/11 - * */ diff --git a/arch/arm/mach-w90x900/include/mach/regs-serial.h b/arch/arm/mach-w90x900/include/mach/regs-serial.h index f08fa0d75e11..797c9727a157 100644 --- a/arch/arm/mach-w90x900/include/mach/regs-serial.h +++ b/arch/arm/mach-w90x900/include/mach/regs-serial.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-w90x900/include/mach/regs-serial.h * @@ -7,12 +8,6 @@ * Wan ZongShun <mcuos.com@gmail.com> * * Based on arch/arm/mach-s3c2410/include/mach/regs-serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * */ #ifndef __ASM_ARM_REGS_SERIAL_H diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h index 3855ecebda6e..32e92a77ccae 100644 --- a/arch/arm/mach-w90x900/include/mach/uncompress.h +++ b/arch/arm/mach-w90x900/include/mach/uncompress.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-w90x900/include/mach/uncompress.h * @@ -7,12 +8,6 @@ * Wan ZongShun <mcuos.com@gmail.com> * * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * */ #ifndef __ASM_ARCH_UNCOMPRESS_H diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c index 491b317daffa..081b0f65477a 100644 --- a/arch/arm/mach-w90x900/irq.c +++ b/arch/arm/mach-w90x900/irq.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/irq.c * @@ -7,11 +8,6 @@ * All rights reserved. * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * */ #include <linux/init.h> diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c index 92f1c978f35e..e6d30af3e35a 100644 --- a/arch/arm/mach-w90x900/mach-nuc910evb.c +++ b/arch/arm/mach-w90x900/mach-nuc910evb.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/mach-nuc910evb.c * @@ -6,11 +7,6 @@ * Copyright (C) 2008 Nuvoton technology corporation. * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation;version 2 of the License. - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c index 26f7189056e3..62547308c344 100644 --- a/arch/arm/mach-w90x900/mach-nuc950evb.c +++ b/arch/arm/mach-w90x900/mach-nuc950evb.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/mach-nuc950evb.c * @@ -7,12 +8,8 @@ * * Wan ZongShun <mcuos.com@gmail.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation;version 2 of the License. * history: * Wang Qiang (rurality.linux@gmail.com) add LCD support - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c index 9b4e73fe10e5..35a53459d0d2 100644 --- a/arch/arm/mach-w90x900/mach-nuc960evb.c +++ b/arch/arm/mach-w90x900/mach-nuc960evb.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/mach-nuc960evb.c * @@ -6,11 +7,6 @@ * Copyright (C) 2008 Nuvoton technology corporation. * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation;version 2 of the License. - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c index c58d142b8a46..05f3779a3618 100644 --- a/arch/arm/mach-w90x900/mfp.c +++ b/arch/arm/mach-w90x900/mfp.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/mfp.c * * Copyright (c) 2008 Nuvoton technology corporation * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. */ #include <linux/module.h> diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c index 1523f4136985..45ae8285bfc9 100644 --- a/arch/arm/mach-w90x900/nuc910.c +++ b/arch/arm/mach-w90x900/nuc910.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/nuc910.c * @@ -8,11 +9,6 @@ * Wan ZongShun <mcuos.com@gmail.com> * * NUC910 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h index b14c71a9e683..53be3323736f 100644 --- a/arch/arm/mach-w90x900/nuc910.h +++ b/arch/arm/mach-w90x900/nuc910.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-w90x900/nuc910.h * @@ -6,11 +7,6 @@ * Header file for NUC900 CPU support * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include "nuc9xx.h" diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c index 5704f74a50ee..3be114249cd8 100644 --- a/arch/arm/mach-w90x900/nuc950.c +++ b/arch/arm/mach-w90x900/nuc950.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/nuc950.c * @@ -8,11 +9,6 @@ * Wan ZongShun <mcuos.com@gmail.com> * * NUC950 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h index 6e9de3051cd4..23cff81ea630 100644 --- a/arch/arm/mach-w90x900/nuc950.h +++ b/arch/arm/mach-w90x900/nuc950.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-w90x900/nuc950.h * @@ -6,11 +7,6 @@ * Header file for NUC900 CPU support * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include "nuc9xx.h" diff --git a/arch/arm/mach-w90x900/nuc960.c b/arch/arm/mach-w90x900/nuc960.c index 8851a3a27ce2..8a27d74b975e 100644 --- a/arch/arm/mach-w90x900/nuc960.c +++ b/arch/arm/mach-w90x900/nuc960.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-w90x900/nuc960.c * @@ -8,11 +9,6 @@ * Wan ZongShun <mcuos.com@gmail.com> * * NUC960 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * */ #include <linux/platform_device.h> diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h index 9f6df9a00286..88bb13c971dc 100644 --- a/arch/arm/mach-w90x900/nuc960.h +++ b/arch/arm/mach-w90x900/nuc960.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-w90x900/nuc960.h * @@ -6,11 +7,6 @@ * Header file for NUC900 CPU support * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include "nuc9xx.h" diff --git a/arch/arm/mach-w90x900/nuc9xx.h b/arch/arm/mach-w90x900/nuc9xx.h index e3ab1e1381f1..21f6f9c304e8 100644 --- a/arch/arm/mach-w90x900/nuc9xx.h +++ b/arch/arm/mach-w90x900/nuc9xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-w90x900/nuc9xx.h * @@ -8,11 +9,6 @@ * Header file for NUC900 CPU support * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/reboot.h> diff --git a/arch/arm/mach-w90x900/regs-ebi.h b/arch/arm/mach-w90x900/regs-ebi.h index b68455e7f88b..3fb22702cfc0 100644 --- a/arch/arm/mach-w90x900/regs-ebi.h +++ b/arch/arm/mach-w90x900/regs-ebi.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-w90x900/include/mach/regs-ebi.h * * Copyright (c) 2009 Nuvoton technology corporation. * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * */ #ifndef __ASM_ARCH_REGS_EBI_H diff --git a/arch/arm/mach-w90x900/regs-gcr.h b/arch/arm/mach-w90x900/regs-gcr.h index 6087abd93ef5..caf1090ecad8 100644 --- a/arch/arm/mach-w90x900/regs-gcr.h +++ b/arch/arm/mach-w90x900/regs-gcr.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-w90x900/include/mach/regs-gcr.h * @@ -5,12 +6,6 @@ * All rights reserved. * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * */ #ifndef __ASM_ARCH_REGS_GCR_H diff --git a/arch/arm/mach-w90x900/regs-timer.h b/arch/arm/mach-w90x900/regs-timer.h index 8f390620c0e4..d12807fd1e3e 100644 --- a/arch/arm/mach-w90x900/regs-timer.h +++ b/arch/arm/mach-w90x900/regs-timer.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/mach-w90x900/include/mach/regs-timer.h * @@ -7,12 +8,6 @@ * Wan ZongShun <mcuos.com@gmail.com> * * Based on arch/arm/mach-s3c2410/include/mach/regs-timer.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * */ #ifndef __ASM_ARCH_REGS_TIMER_H diff --git a/arch/arm/mach-w90x900/regs-usb.h b/arch/arm/mach-w90x900/regs-usb.h index ab74b0c2480b..98046c811bf7 100644 --- a/arch/arm/mach-w90x900/regs-usb.h +++ b/arch/arm/mach-w90x900/regs-usb.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-w90x900/include/mach/regs-usb.h * * Copyright (c) 2008 Nuvoton technology corporation. * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * */ #ifndef __ASM_ARCH_REGS_USB_H diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c index cda085245e34..dd20fab9a960 100644 --- a/arch/arm/mach-w90x900/time.c +++ b/arch/arm/mach-w90x900/time.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * linux/arch/arm/mach-w90x900/time.c * @@ -7,12 +8,6 @@ * All rights reserved. * * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * */ #include <linux/kernel.h> diff --git a/arch/arm/mach-zx/Makefile b/arch/arm/mach-zx/Makefile index a4b486433209..6f8930cdb8fb 100644 --- a/arch/arm/mach-zx/Makefile +++ b/arch/arm/mach-zx/Makefile @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SOC_ZX296702) += zx296702.o zx296702-pm-domain.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-zx/core.h b/arch/arm/mach-zx/core.h index 3efe8e038ee4..25fe873892c9 100644 --- a/arch/arm/mach-zx/core.h +++ b/arch/arm/mach-zx/core.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2014 Linaro Ltd. * Copyright (C) 2014 ZTE Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __MACH_ZX_CORE_H diff --git a/arch/arm/mach-zx/headsmp.S b/arch/arm/mach-zx/headsmp.S index a1aa4028389f..0846859b0573 100644 --- a/arch/arm/mach-zx/headsmp.S +++ b/arch/arm/mach-zx/headsmp.S @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2014 Linaro Ltd. * Copyright (C) 2014 ZTE Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> diff --git a/arch/arm/mach-zx/platsmp.c b/arch/arm/mach-zx/platsmp.c index afb9a82dedc3..d4e1d3792224 100644 --- a/arch/arm/mach-zx/platsmp.c +++ b/arch/arm/mach-zx/platsmp.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2014 Linaro Ltd. * Copyright (C) 2014 ZTE Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/delay.h> diff --git a/arch/arm/mach-zx/zx296702-pm-domain.c b/arch/arm/mach-zx/zx296702-pm-domain.c index 79dcf2549267..7a08bf9dd792 100644 --- a/arch/arm/mach-zx/zx296702-pm-domain.c +++ b/arch/arm/mach-zx/zx296702-pm-domain.c @@ -1,8 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2015 Linaro Ltd. * * Author: Jun Nie <jun.nie@linaro.org> - * License terms: GNU General Public License (GPL) version 2 */ #include <linux/delay.h> #include <linux/err.h> diff --git a/arch/arm/mach-zx/zx296702.c b/arch/arm/mach-zx/zx296702.c index a041e13ab0ac..fd8fa3a074fa 100644 --- a/arch/arm/mach-zx/zx296702.c +++ b/arch/arm/mach-zx/zx296702.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2014 Linaro Ltd. * Copyright (C) 2014 ZTE Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <asm/mach/arch.h> diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile index b03a97eb7501..9df74cd85fd0 100644 --- a/arch/arm/mach-zynq/Makefile +++ b/arch/arm/mach-zynq/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel. # diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 6aba9ebf8041..3a4248fd7962 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -1,20 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * This file contains common code that is intended to be used across * boards so that it's not replicated. * * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/cpumask.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index e771933db7e8..60e662324699 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -1,17 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * This file contains common function prototypes to avoid externs * in the c files. * * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __MACH_ZYNQ_COMMON_H__ diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S index f6d5de073e34..ab85003cf9ad 100644 --- a/arch/arm/mach-zynq/headsmp.S +++ b/arch/arm/mach-zynq/headsmp.S @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> * Copyright (c) 2012-2013 Xilinx - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c index caa6d5fe9078..a7cfe07156f4 100644 --- a/arch/arm/mach-zynq/platsmp.c +++ b/arch/arm/mach-zynq/platsmp.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * This file contains Xilinx specific SMP code, used to start up * the second processor. @@ -7,15 +8,6 @@ * based on linux/arch/arm/mach-realview/platsmp.c * * Copyright (C) 2002 ARM Ltd. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/export.h> diff --git a/arch/arm/mach-zynq/pm.c b/arch/arm/mach-zynq/pm.c index fa44fc1b6dd5..8ba450ab559c 100644 --- a/arch/arm/mach-zynq/pm.c +++ b/arch/arm/mach-zynq/pm.c @@ -1,22 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Zynq power management * * Copyright (C) 2012 - 2014 Xilinx * * Sören Brinkmann <soren.brinkmann@xilinx.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/io.h> diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index 10ef99ce1d90..37707614885a 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -1,17 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Xilinx SLCR driver * * Copyright (c) 2011-2013 Xilinx Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA - * 02139, USA. */ #include <linux/io.h> diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index b54f8f8def36..6067fa4de22b 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/alignment.c * @@ -6,10 +7,6 @@ * Thumb alignment fault fixups (c) 2004 MontaVista Software, Inc. * - Adapted from gdb/sim/arm/thumbemu.c -- Thumb instruction emulation. * Copyright (C) 1996, Cygnus Software Technologies Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/moduleparam.h> #include <linux/compiler.h> @@ -133,7 +130,7 @@ static const char *usermode_action[] = { static int alignment_proc_show(struct seq_file *m, void *v) { seq_printf(m, "User:\t\t%lu\n", ai_user); - seq_printf(m, "System:\t\t%lu (%pF)\n", ai_sys, ai_sys_last_pc); + seq_printf(m, "System:\t\t%lu (%pS)\n", ai_sys, ai_sys_last_pc); seq_printf(m, "Skipped:\t%lu\n", ai_skipped); seq_printf(m, "Half:\t\t%lu\n", ai_half); seq_printf(m, "Word:\t\t%lu\n", ai_word); diff --git a/arch/arm/mm/cache-b15-rac.c b/arch/arm/mm/cache-b15-rac.c index c6ed14840c3c..3471fc64a3ae 100644 --- a/arch/arm/mm/cache-b15-rac.c +++ b/arch/arm/mm/cache-b15-rac.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Broadcom Brahma-B15 CPU read-ahead cache management functions * * Copyright (C) 2015-2016 Broadcom - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/err.h> diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S index 2f0c58836ae7..3a464d1649b4 100644 --- a/arch/arm/mm/cache-fa.S +++ b/arch/arm/mm/cache-fa.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/cache-fa.S * @@ -7,10 +8,6 @@ * Based on cache-v4wb.S: * Copyright (C) 1997-2002 Russell king * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Processors: FA520 FA526 FA626 */ #include <linux/linkage.h> diff --git a/arch/arm/mm/cache-l2x0-pmu.c b/arch/arm/mm/cache-l2x0-pmu.c index afe5b4c7b164..993fefdc167a 100644 --- a/arch/arm/mm/cache-l2x0-pmu.c +++ b/arch/arm/mm/cache-l2x0-pmu.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * L220/L310 cache controller support * * Copyright (C) 2016 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/errno.h> #include <linux/hrtimer.h> @@ -314,14 +302,6 @@ static int l2x0_pmu_event_init(struct perf_event *event) event->attach_state & PERF_ATTACH_TASK) return -EINVAL; - if (event->attr.exclude_user || - event->attr.exclude_kernel || - event->attr.exclude_hv || - event->attr.exclude_idle || - event->attr.exclude_host || - event->attr.exclude_guest) - return -EINVAL; - if (event->cpu < 0) return -EINVAL; @@ -544,6 +524,7 @@ static __init int l2x0_pmu_init(void) .del = l2x0_pmu_event_del, .event_init = l2x0_pmu_event_init, .attr_groups = l2x0_pmu_attr_groups, + .capabilities = PERF_PMU_CAP_NO_EXCLUDE, }; l2x0_pmu_reset(); diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 808efbb89b88..5b251c8ecd45 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mm/cache-l2x0.c - L210/L220/L310 cache controller support * * Copyright (C) 2007 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/cpu.h> #include <linux/err.h> diff --git a/arch/arm/mm/cache-nop.S b/arch/arm/mm/cache-nop.S index f1cc9861031f..72d939ef8798 100644 --- a/arch/arm/mm/cache-nop.S +++ b/arch/arm/mm/cache-nop.S @@ -1,8 +1,4 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +/* SPDX-License-Identifier: GPL-2.0-only */ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> diff --git a/arch/arm/mm/cache-tauros3.h b/arch/arm/mm/cache-tauros3.h index 02c0a97cbc02..fa5f92679940 100644 --- a/arch/arm/mm/cache-tauros3.h +++ b/arch/arm/mm/cache-tauros3.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Marvell Tauros3 cache controller includes * @@ -5,19 +6,6 @@ * * based on GPL'ed 2.6 kernel sources * (c) Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __ASM_ARM_HARDWARE_TAUROS3_H diff --git a/arch/arm/mm/cache-uniphier.c b/arch/arm/mm/cache-uniphier.c index f57b080b6fd4..ff2881458504 100644 --- a/arch/arm/mm/cache-uniphier.c +++ b/arch/arm/mm/cache-uniphier.c @@ -1,16 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #define pr_fmt(fmt) "uniphier: " fmt diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index 91e3adf155cb..7787057e4990 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/cache-v4.S * * Copyright (C) 1997-2002 Russell king - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S index a5084ec70c6e..905ac2fa2b1e 100644 --- a/arch/arm/mm/cache-v4wb.S +++ b/arch/arm/mm/cache-v4wb.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/cache-v4wb.S * * Copyright (C) 1997-2002 Russell king - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index a0982ce49007..0b290c25a99d 100644 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/cache-v4wt.S * * Copyright (C) 1997-2002 Russell king * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ARMv4 write through cache operations support. * * We assume that the write buffer is not enabled. diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 24659952c278..f0f65eb073e4 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/cache-v6.S * * Copyright (C) 2001 Deep Blue Solutions Ltd. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This is the "shell" of the ARMv6 processor support. */ #include <linux/linkage.h> @@ -215,8 +212,8 @@ v6_dma_inv_range: #endif tst r1, #D_CACHE_LINE_SIZE - 1 #ifdef CONFIG_DMA_CACHE_RWFO - ldrneb r2, [r1, #-1] @ read for ownership - strneb r2, [r1, #-1] @ write for ownership + ldrbne r2, [r1, #-1] @ read for ownership + strbne r2, [r1, #-1] @ write for ownership #endif bic r1, r1, #D_CACHE_LINE_SIZE - 1 #ifdef HARVARD_CACHE @@ -284,8 +281,8 @@ ENTRY(v6_dma_flush_range) add r0, r0, #D_CACHE_LINE_SIZE cmp r0, r1 #ifdef CONFIG_DMA_CACHE_RWFO - ldrlob r2, [r0] @ read for ownership - strlob r2, [r0] @ write for ownership + ldrblo r2, [r0] @ read for ownership + strblo r2, [r0] @ write for ownership #endif blo 1b mov r0, #0 diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 2149b47a0c5a..8c83b4586883 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/cache-v7.S * * Copyright (C) 2001 Deep Blue Solutions Ltd. * Copyright (C) 2005 ARM Ltd. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This is the "shell" of the ARMv7 processor support. */ #include <linux/linkage.h> diff --git a/arch/arm/mm/cache-v7m.S b/arch/arm/mm/cache-v7m.S index 32aa2a2aa260..a0035c426ce6 100644 --- a/arch/arm/mm/cache-v7m.S +++ b/arch/arm/mm/cache-v7m.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/cache-v7m.S * @@ -6,10 +7,6 @@ * Copyright (C) 2001 Deep Blue Solutions Ltd. * Copyright (C) 2005 ARM Ltd. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This is the "shell" of the ARMv7M processor support. */ #include <linux/linkage.h> diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c index 6c3edeb66e74..d20d7af02d10 100644 --- a/arch/arm/mm/cache-xsc3l2.c +++ b/arch/arm/mm/cache-xsc3l2.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mm/cache-xsc3l2.c - XScale3 L2 cache controller support * * Copyright (C) 2007 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> #include <linux/highmem.h> diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index c8c8b9ed02e0..b7525b433f3e 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/context.c * @@ -5,10 +6,6 @@ * Copyright (C) 2012 ARM Limited * * Author: Will Deacon <will.deacon@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/sched.h> diff --git a/arch/arm/mm/copypage-fa.c b/arch/arm/mm/copypage-fa.c index bf24690ec83a..7e28c26f5aa4 100644 --- a/arch/arm/mm/copypage-fa.c +++ b/arch/arm/mm/copypage-fa.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/lib/copypage-fa.S * @@ -6,10 +7,6 @@ * * Based on copypage-v4wb.S: * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/highmem.h> diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c index cc819732d9b8..064b19e63571 100644 --- a/arch/arm/mm/copypage-feroceon.c +++ b/arch/arm/mm/copypage-feroceon.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/copypage-feroceon.S * * Copyright (C) 2008 Marvell Semiconductors * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This handles copy_user_highpage and clear_user_page on Feroceon * more optimally than the generic implementations. */ diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index b03202cddddb..a94bd08fdec2 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/lib/copypage-armv4mc.S * * Copyright (C) 1995-2005 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This handles the mini data cache, as found on SA11x0 and XScale * processors. When we copy a user page page, we map it in such a way * that accesses to this page will not touch the main data cache, but @@ -45,6 +42,7 @@ static void mc_copy_user_page(void *from, void *to) int tmp; asm volatile ("\ + .syntax unified\n\ ldmia %0!, {r2, r3, ip, lr} @ 4\n\ 1: mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\ stmia %1!, {r2, r3, ip, lr} @ 4\n\ @@ -56,7 +54,7 @@ static void mc_copy_user_page(void *from, void *to) ldmia %0!, {r2, r3, ip, lr} @ 4\n\ subs %2, %2, #1 @ 1\n\ stmia %1!, {r2, r3, ip, lr} @ 4\n\ - ldmneia %0!, {r2, r3, ip, lr} @ 4\n\ + ldmiane %0!, {r2, r3, ip, lr} @ 4\n\ bne 1b @ " : "+&r" (from), "+&r" (to), "=&r" (tmp) : "2" (PAGE_SIZE / 64) diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c index cd3e165afeed..c3581b226459 100644 --- a/arch/arm/mm/copypage-v4wb.c +++ b/arch/arm/mm/copypage-v4wb.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/copypage-v4wb.c * * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/highmem.h> @@ -27,6 +24,7 @@ static void v4wb_copy_user_page(void *kto, const void *kfrom) int tmp; asm volatile ("\ + .syntax unified\n\ ldmia %1!, {r3, r4, ip, lr} @ 4\n\ 1: mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\ stmia %0!, {r3, r4, ip, lr} @ 4\n\ @@ -38,7 +36,7 @@ static void v4wb_copy_user_page(void *kto, const void *kfrom) ldmia %1!, {r3, r4, ip, lr} @ 4\n\ subs %2, %2, #1 @ 1\n\ stmia %0!, {r3, r4, ip, lr} @ 4\n\ - ldmneia %1!, {r3, r4, ip, lr} @ 4\n\ + ldmiane %1!, {r3, r4, ip, lr} @ 4\n\ bne 1b @ 1\n\ mcr p15, 0, %1, c7, c10, 4 @ 1 drain WB" : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp) diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c index 8614572e1296..1fb10733305a 100644 --- a/arch/arm/mm/copypage-v4wt.c +++ b/arch/arm/mm/copypage-v4wt.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/copypage-v4wt.S * * Copyright (C) 1995-1999 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This is for CPUs with a writethrough cache and 'flush ID cache' is * the only supported cache operation. */ @@ -25,6 +22,7 @@ static void v4wt_copy_user_page(void *kto, const void *kfrom) int tmp; asm volatile ("\ + .syntax unified\n\ ldmia %1!, {r3, r4, ip, lr} @ 4\n\ 1: stmia %0!, {r3, r4, ip, lr} @ 4\n\ ldmia %1!, {r3, r4, ip, lr} @ 4+1\n\ @@ -34,7 +32,7 @@ static void v4wt_copy_user_page(void *kto, const void *kfrom) ldmia %1!, {r3, r4, ip, lr} @ 4\n\ subs %2, %2, #1 @ 1\n\ stmia %0!, {r3, r4, ip, lr} @ 4\n\ - ldmneia %1!, {r3, r4, ip, lr} @ 4\n\ + ldmiane %1!, {r3, r4, ip, lr} @ 4\n\ bne 1b @ 1\n\ mcr p15, 0, %2, c7, c7, 0 @ flush ID cache" : "+&r" (kto), "+&r" (kfrom), "=&r" (tmp) diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index a698e575e321..a6488bb6cfa9 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/copypage-v6.c * * Copyright (C) 2002 Deep Blue Solutions Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/spinlock.h> diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c index a08158241ad1..6f0909dda2f9 100644 --- a/arch/arm/mm/copypage-xsc3.c +++ b/arch/arm/mm/copypage-xsc3.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/copypage-xsc3.S * * Copyright (C) 2004 Intel Corp. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Adapted for 3rd gen XScale core, no more mini-dcache * Author: Matt Gilbert (matthew.m.gilbert@intel.com) */ diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 63b921936754..61d834157bc0 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/lib/copypage-xscale.S * * Copyright (C) 1995-2005 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This handles the mini data cache, as found on SA11x0 and XScale * processors. When we copy a user page page, we map it in such a way * that accesses to this page will not touch the main data cache, but diff --git a/arch/arm/mm/dma-mapping-nommu.c b/arch/arm/mm/dma-mapping-nommu.c index f304b10e23a4..1aea01ba1262 100644 --- a/arch/arm/mm/dma-mapping-nommu.c +++ b/arch/arm/mm/dma-mapping-nommu.c @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Based on linux/arch/arm/mm/dma-mapping.c * * Copyright (C) 2000-2004 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/export.h> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 1e3e08a1c456..439bb6a59a04 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/dma-mapping.c * * Copyright (C) 2000-2004 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * DMA uncached mapping support. */ #include <linux/module.h> @@ -188,6 +185,7 @@ const struct dma_map_ops arm_dma_ops = { .unmap_page = arm_dma_unmap_page, .map_sg = arm_dma_map_sg, .unmap_sg = arm_dma_unmap_sg, + .map_resource = dma_direct_map_resource, .sync_single_for_cpu = arm_dma_sync_single_for_cpu, .sync_single_for_device = arm_dma_sync_single_for_device, .sync_sg_for_cpu = arm_dma_sync_sg_for_cpu, @@ -211,6 +209,7 @@ const struct dma_map_ops arm_coherent_dma_ops = { .get_sgtable = arm_dma_get_sgtable, .map_page = arm_coherent_dma_map_page, .map_sg = arm_dma_map_sg, + .map_resource = dma_direct_map_resource, .dma_supported = arm_dma_supported, }; EXPORT_SYMBOL(arm_coherent_dma_ops); @@ -1575,31 +1574,21 @@ static int __arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma void *cpu_addr, dma_addr_t dma_addr, size_t size, unsigned long attrs) { - unsigned long uaddr = vma->vm_start; - unsigned long usize = vma->vm_end - vma->vm_start; struct page **pages = __iommu_get_pages(cpu_addr, attrs); unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; - unsigned long off = vma->vm_pgoff; + int err; if (!pages) return -ENXIO; - if (off >= nr_pages || (usize >> PAGE_SHIFT) > nr_pages - off) + if (vma->vm_pgoff >= nr_pages) return -ENXIO; - pages += off; - - do { - int ret = vm_insert_page(vma, uaddr, *pages++); - if (ret) { - pr_err("Remapping memory failed: %d\n", ret); - return ret; - } - uaddr += PAGE_SIZE; - usize -= PAGE_SIZE; - } while (usize > 0); + err = vm_map_pages(vma, pages, nr_pages); + if (err) + pr_err("Remapping memory failed: %d\n", err); - return 0; + return err; } static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, @@ -2277,7 +2266,7 @@ EXPORT_SYMBOL_GPL(arm_iommu_attach_device); * @dev: valid struct device pointer * * Detaches the provided device from a previously attached map. - * This voids the dma operations (dma_map_ops pointer) + * This overwrites the dma_ops pointer with appropriate non-IOMMU ops. */ void arm_iommu_detach_device(struct device *dev) { diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c index 084779c5c893..006d27ee4fc6 100644 --- a/arch/arm/mm/dump.c +++ b/arch/arm/mm/dump.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Debug helper to dump the current kernel pagetables of the system * so that we can see what the various memory ranges are set to. @@ -6,11 +7,6 @@ * (C) Copyright 2008 Intel Corporation * * Author: Arjan van de Ven <arjan@linux.intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. */ #include <linux/debugfs.h> #include <linux/fs.h> diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 4d75dae5ac96..ae857f41f68d 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/fault-armv.c * * Copyright (C) 1995 Linus Torvalds * Modifications for ARM processor (c) 1995-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/sched.h> #include <linux/kernel.h> diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 58f69fa07df9..0048eadd0681 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/fault.c * * Copyright (C) 1995 Linus Torvalds * Modifications for ARM processor (c) 1995-2004 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/extable.h> #include <linux/signal.h> diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 58469623b015..6ecbda87ee46 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/flush.c * * Copyright (C) 1995-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> #include <linux/mm.h> diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index d02f8187b1cc..a76f8ace9ce6 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mm/highmem.c -- ARM highmem support * * Author: Nicolas Pitre * Created: september 8, 2008 * Copyright: Marvell Semiconductors Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c index fcafb521f14e..a1e5aace897a 100644 --- a/arch/arm/mm/hugetlbpage.c +++ b/arch/arm/mm/hugetlbpage.c @@ -1,22 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mm/hugetlbpage.c * * Copyright (C) 2012 ARM Ltd. * * Based on arch/x86/include/asm/hugetlb.h and Bill Carson's patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index 1d1edd064199..a033f6134a64 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -6,6 +6,7 @@ #include <asm/cputype.h> #include <asm/idmap.h> +#include <asm/hwcap.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> #include <asm/sections.h> @@ -110,7 +111,8 @@ static int __init init_static_idmap(void) __idmap_text_end, 0); /* Flush L1 for the hardware to see this page table content */ - flush_cache_louis(); + if (!(elf_hwcap & HWCAP_LPAE)) + flush_cache_louis(); return 0; } diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 478ea8b7db87..749a5a6f6143 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/init.c * * Copyright (C) 1995-2005 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/errno.h> @@ -182,21 +179,6 @@ int pfn_valid(unsigned long pfn) EXPORT_SYMBOL(pfn_valid); #endif -#ifndef CONFIG_SPARSEMEM -static void __init arm_memory_present(void) -{ -} -#else -static void __init arm_memory_present(void) -{ - struct memblock_region *reg; - - for_each_memblock(memory, reg) - memory_present(0, memblock_region_memory_base_pfn(reg), - memblock_region_memory_end_pfn(reg)); -} -#endif - static bool arm_memblock_steal_permitted = true; phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align) @@ -205,7 +187,11 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align) BUG_ON(!arm_memblock_steal_permitted); - phys = memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE); + phys = memblock_phys_alloc(size, align); + if (!phys) + panic("Failed to steal %pa bytes at %pS\n", + &size, (void *)_RET_IP_); + memblock_free(phys, size); memblock_remove(phys, size); @@ -278,21 +264,18 @@ void __init arm_memblock_init(const struct machine_desc *mdesc) void __init bootmem_init(void) { - unsigned long min, max_low, max_high; - memblock_allow_resize(); - max_low = max_high = 0; - find_limits(&min, &max_low, &max_high); + find_limits(&min_low_pfn, &max_low_pfn, &max_pfn); - early_memtest((phys_addr_t)min << PAGE_SHIFT, - (phys_addr_t)max_low << PAGE_SHIFT); + early_memtest((phys_addr_t)min_low_pfn << PAGE_SHIFT, + (phys_addr_t)max_low_pfn << PAGE_SHIFT); /* * Sparsemem tries to allocate bootmem in memory_present(), * so must be done after the fixed reservations */ - arm_memory_present(); + memblocks_present(); /* * sparse_init() needs the bootmem allocator up and running. @@ -304,16 +287,7 @@ void __init bootmem_init(void) * the sparse mem_map arrays initialized by sparse_init() * for memmap_init_zone(), otherwise all PFNs are invalid. */ - zone_sizes_init(min, max_low, max_high); - - /* - * This doesn't seem to be used by the Linux memory manager any - * more, but is used by ll_rw_block. If we can get rid of it, we - * also get rid of some of the stuff above as well. - */ - min_low_pfn = min; - max_low_pfn = max_low; - max_pfn = max_high; + zone_sizes_init(min_low_pfn, max_low_pfn, max_pfn); } /* @@ -494,55 +468,6 @@ void __init mem_init(void) mem_init_print_info(NULL); -#define MLK(b, t) b, t, ((t) - (b)) >> 10 -#define MLM(b, t) b, t, ((t) - (b)) >> 20 -#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K) - - pr_notice("Virtual kernel memory layout:\n" - " vector : 0x%08lx - 0x%08lx (%4ld kB)\n" -#ifdef CONFIG_HAVE_TCM - " DTCM : 0x%08lx - 0x%08lx (%4ld kB)\n" - " ITCM : 0x%08lx - 0x%08lx (%4ld kB)\n" -#endif - " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" - " vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n" - " lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n" -#ifdef CONFIG_HIGHMEM - " pkmap : 0x%08lx - 0x%08lx (%4ld MB)\n" -#endif -#ifdef CONFIG_MODULES - " modules : 0x%08lx - 0x%08lx (%4ld MB)\n" -#endif - " .text : 0x%p" " - 0x%p" " (%4td kB)\n" - " .init : 0x%p" " - 0x%p" " (%4td kB)\n" - " .data : 0x%p" " - 0x%p" " (%4td kB)\n" - " .bss : 0x%p" " - 0x%p" " (%4td kB)\n", - - MLK(VECTORS_BASE, VECTORS_BASE + PAGE_SIZE), -#ifdef CONFIG_HAVE_TCM - MLK(DTCM_OFFSET, (unsigned long) dtcm_end), - MLK(ITCM_OFFSET, (unsigned long) itcm_end), -#endif - MLK(FIXADDR_START, FIXADDR_END), - MLM(VMALLOC_START, VMALLOC_END), - MLM(PAGE_OFFSET, (unsigned long)high_memory), -#ifdef CONFIG_HIGHMEM - MLM(PKMAP_BASE, (PKMAP_BASE) + (LAST_PKMAP) * - (PAGE_SIZE)), -#endif -#ifdef CONFIG_MODULES - MLM(MODULES_VADDR, MODULES_END), -#endif - - MLK_ROUNDUP(_text, _etext), - MLK_ROUNDUP(__init_begin, __init_end), - MLK_ROUNDUP(_sdata, _edata), - MLK_ROUNDUP(__bss_start, __bss_stop)); - -#undef MLK -#undef MLM -#undef MLK_ROUNDUP - /* * Check boundaries twice: Some fundamental inconsistencies can * be detected at build time already. @@ -752,27 +677,14 @@ void free_initmem(void) } #ifdef CONFIG_BLK_DEV_INITRD - -static int keep_initrd; - void free_initrd_mem(unsigned long start, unsigned long end) { - if (!keep_initrd) { - if (start == initrd_start) - start = round_down(start, PAGE_SIZE); - if (end == initrd_end) - end = round_up(end, PAGE_SIZE); - - poison_init_mem((void *)start, PAGE_ALIGN(end) - start); - free_reserved_area((void *)start, (void *)end, -1, "initrd"); - } -} + if (start == initrd_start) + start = round_down(start, PAGE_SIZE); + if (end == initrd_end) + end = round_up(end, PAGE_SIZE); -static int __init keepinitrd_setup(char *__unused) -{ - keep_initrd = 1; - return 1; + poison_init_mem((void *)start, PAGE_ALIGN(end) - start); + free_reserved_area((void *)start, (void *)end, -1, "initrd"); } - -__setup("keepinitrd", keepinitrd_setup); #endif diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 5bf9443cfbaa..d42b93316183 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/ioremap.c * diff --git a/arch/arm/mm/l2c-common.c b/arch/arm/mm/l2c-common.c index 10a3cf28c362..073b435ae0fe 100644 --- a/arch/arm/mm/l2c-common.c +++ b/arch/arm/mm/l2c-common.c @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2010 ARM Ltd. * Written by Catalin Marinas <catalin.marinas@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/bug.h> #include <linux/smp.h> diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index f5cc1ccfea3d..1aa2586fa597 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/mmu.c * * Copyright (C) 1995-2005 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> #include <linux/kernel.h> @@ -719,16 +716,15 @@ EXPORT_SYMBOL(phys_mem_access_prot); #define vectors_base() (vectors_high() ? 0xffff0000 : 0) -static void __init *early_alloc_aligned(unsigned long sz, unsigned long align) -{ - void *ptr = __va(memblock_phys_alloc(sz, align)); - memset(ptr, 0, sz); - return ptr; -} - static void __init *early_alloc(unsigned long sz) { - return early_alloc_aligned(sz, sz); + void *ptr = memblock_alloc(sz, sz); + + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", + __func__, sz, sz); + + return ptr; } static void *__init late_alloc(unsigned long sz) @@ -1000,7 +996,10 @@ void __init iotable_init(struct map_desc *io_desc, int nr) if (!nr) return; - svm = early_alloc_aligned(sizeof(*svm) * nr, __alignof__(*svm)); + svm = memblock_alloc(sizeof(*svm) * nr, __alignof__(*svm)); + if (!svm) + panic("%s: Failed to allocate %zu bytes align=0x%zx\n", + __func__, sizeof(*svm) * nr, __alignof__(*svm)); for (md = io_desc; nr; md++, nr--) { create_mapping(md); @@ -1022,7 +1021,10 @@ void __init vm_reserve_area_early(unsigned long addr, unsigned long size, struct vm_struct *vm; struct static_vm *svm; - svm = early_alloc_aligned(sizeof(*svm), __alignof__(*svm)); + svm = memblock_alloc(sizeof(*svm), __alignof__(*svm)); + if (!svm) + panic("%s: Failed to allocate %zu bytes align=0x%zx\n", + __func__, sizeof(*svm), __alignof__(*svm)); vm = &svm->vm; vm->addr = (void *)addr; diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 7d67c70bbded..24ecf8d30a1e 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/nommu.c * diff --git a/arch/arm/mm/pageattr.c b/arch/arm/mm/pageattr.c index 1403cb4a0c3d..0f5faf30d9bf 100644 --- a/arch/arm/mm/pageattr.c +++ b/arch/arm/mm/pageattr.c @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2014, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/mm.h> #include <linux/module.h> diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index a1606d950251..478bd2c6aa50 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/pgd.c * * Copyright (C) 1998-2005 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/mm.h> #include <linux/gfp.h> diff --git a/arch/arm/mm/pmsa-v8.c b/arch/arm/mm/pmsa-v8.c index 617a83def88a..0d7d5fb59247 100644 --- a/arch/arm/mm/pmsa-v8.c +++ b/arch/arm/mm/pmsa-v8.c @@ -165,7 +165,7 @@ static int __init pmsav8_setup_ram(unsigned int number, phys_addr_t start,phys_a return -EINVAL; bar = start; - lar = (end - 1) & ~(PMSAv8_MINALIGN - 1);; + lar = (end - 1) & ~(PMSAv8_MINALIGN - 1); bar |= PMSAv8_AP_PL1RW_PL0RW | PMSAv8_RGN_SHARED; lar |= PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN; @@ -181,7 +181,7 @@ static int __init pmsav8_setup_io(unsigned int number, phys_addr_t start,phys_ad return -EINVAL; bar = start; - lar = (end - 1) & ~(PMSAv8_MINALIGN - 1);; + lar = (end - 1) & ~(PMSAv8_MINALIGN - 1); bar |= PMSAv8_AP_PL1RW_PL0RW | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN; lar |= PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN; diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 774ef1323554..4fa5371bc662 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mm/proc-arm1020.S: MMU functions for ARM1020 * @@ -5,21 +6,6 @@ * Copyright (C) 2000 Deep Blue Solutions Ltd. * hacked for non-paged-MM by Hyok S. Choi, 2003. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * * These are the low level assembler for performing cache and TLB * functions on the arm1020. */ diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index ae3c27b71594..5d8a8339e09a 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mm/proc-arm1020e.S: MMU functions for ARM1020 * @@ -5,21 +6,6 @@ * Copyright (C) 2000 Deep Blue Solutions Ltd. * hacked for non-paged-MM by Hyok S. Choi, 2003. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * * These are the low level assembler for performing cache and TLB * functions on the arm1020e. */ diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index dbb2413fe04d..b3dd95c345e4 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mm/proc-arm1022.S: MMU functions for ARM1022E * @@ -5,12 +6,6 @@ * Copyright (C) 2000 Deep Blue Solutions Ltd. * hacked for non-paged-MM by Hyok S. Choi, 2003. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * * These are the low level assembler for performing cache and TLB * functions on the ARM1022E. */ diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 0b37b2cef9d3..ac5afde12f35 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mm/proc-arm1026.S: MMU functions for ARM1026EJ-S * @@ -5,12 +6,6 @@ * Copyright (C) 2000 Deep Blue Solutions Ltd. * hacked for non-paged-MM by Hyok S. Choi, 2003. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * * These are the low level assembler for performing cache and TLB * functions on the ARM1026EJ-S. */ diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 3651cd70e418..c99d24363f32 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mm/proc-arm720.S: MMU functions for ARM720 * @@ -6,21 +7,6 @@ * Copyright (C) 2000 ARM Limited, Deep Blue Solutions Ltd. * hacked for non-paged-MM by Hyok S. Choi, 2004. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * * These are the low level assembler for performing cache and TLB * functions on the ARM720T. The ARM720T has a writethrough IDC * cache, so we don't need to clean it. diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 024fb7732407..1b4a3838393f 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/arm740.S: utility functions for ARM740 * * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 25472d94426d..17a4687065c7 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/proc-arm7tdmi.S: utility functions for ARM7TDMI * * Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 7a14bd4414c9..298c76b47749 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mm/proc-arm920.S: MMU functions for ARM920 * @@ -5,21 +6,6 @@ * Copyright (C) 2000 Deep Blue Solutions Ltd. * hacked for non-paged-MM by Hyok S. Choi, 2003. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * * These are the low level assembler for performing cache and TLB * functions on the arm920. * diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index edccfcdcd551..824be3a0bc23 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mm/proc-arm922.S: MMU functions for ARM922 * @@ -6,21 +7,6 @@ * Copyright (C) 2001 Altera Corporation * hacked for non-paged-MM by Hyok S. Choi, 2003. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * * These are the low level assembler for performing cache and TLB * functions on the arm922. * diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 32a47cc19076..d40cff8f102c 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mm/arm925.S: MMU functions for ARM925 * @@ -11,21 +12,6 @@ * * hacked for non-paged-MM by Hyok S. Choi, 2004. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * * These are the low level assembler for performing cache and TLB * functions on the arm925. * diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index fb827c633693..f3cd08f353f0 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mm/proc-arm926.S: MMU functions for ARM926EJ-S * @@ -5,21 +6,6 @@ * Copyright (C) 2000 Deep Blue Solutions Ltd. * hacked for non-paged-MM by Hyok S. Choi, 2003. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * * These are the low level assembler for performing cache and TLB * functions on the arm926. * diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index ee5b66f847c4..1c26d991386d 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/arm940.S: utility functions for ARM940T * * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 7361837edc31..2dc1c75a4fd4 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/arm946.S: utility functions for ARM946E-S * * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com) * * (Many of cache codes are from proc-arm926.S) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 7fac8c612134..913c06e590af 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/proc-arm9tdmi.S: utility functions for ARM9TDMI * * Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 4001b73af4ee..8120b6f4dbb8 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526 * @@ -5,12 +6,6 @@ * Copyright (C) 2005 Faraday Corp. * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * * These are the low level assembler for performing cache and TLB * functions on the fa526. */ diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 92e08bf37aad..bb6dc34d42a3 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -1,22 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mm/proc-feroceon.S: MMU functions for Feroceon * * Heavily based on proc-arm926.S * Maintainer: Assaf Hoffman <hoffman@marvell.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/linkage.h> diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 6f07d2ef4ff2..f08308578885 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -1,23 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core * * PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core. * * Heavily based on proc-arm926.S and proc-xsc3.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/linkage.h> diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index ee2ce496239f..d5bc5d702563 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/proc-sa110.S * * Copyright (C) 1997-2002 Russell King * hacked for non-paged-MM by Hyok S. Choi, 2003. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * MMU functions for SA110 * * These are the low level assembler for performing cache and TLB diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 222d5836f666..be7b611c76c7 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/proc-sa1100.S * * Copyright (C) 1997-2002 Russell King * hacked for non-paged-MM by Hyok S. Choi, 2003. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * MMU functions for SA110 * * These are the low level assembler for performing cache and TLB diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 054b491ff764..e21249548e9f 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mm/proc-syms.c * * Copyright (C) 2000-2002 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> #include <linux/mm.h> diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 06d890a2342b..c1c85eb3484f 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/proc-v6.S * * Copyright (C) 2001 Deep Blue Solutions Ltd. * Modified by Catalin Marinas for noMMU support * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This is the "shell" of the ARMv6 processor support. */ #include <linux/init.h> diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index f8d45ad2a515..5db029c8f987 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mm/proc-v7-2level.S * * Copyright (C) 2001 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define TTB_S (1 << 1) diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 7d16bbc4102b..131984462d0d 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mm/proc-v7-3level.S * @@ -5,19 +6,6 @@ * Copyright (C) 2011 ARM Ltd. * Author: Catalin Marinas <catalin.marinas@arm.com> * based on arch/arm/mm/proc-v7-2level.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <asm/assembler.h> diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 339eb17c9808..83741c31757d 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/proc-v7.S * * Copyright (C) 2001 Deep Blue Solutions Ltd. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This is the "shell" of the ARMv7 processor support. */ #include <linux/arm-smccc.h> diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index 47a5acc64433..1448f144e7fb 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/proc-v7m.S * * Copyright (C) 2008 ARM Ltd. * Copyright (C) 2001 Deep Blue Solutions Ltd. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This is the "shell" of the ARMv7-M processor support. */ #include <linux/linkage.h> @@ -139,6 +136,9 @@ __v7m_setup_cont: cpsie i svc #0 1: cpsid i + ldr r0, =exc_ret + orr lr, lr, #EXC_RET_THREADMODE_PROCESSSTACK + str lr, [r0] ldmia sp, {r0-r3, r12} str r5, [r12, #11 * 4] @ restore the original SVC vector entry mov lr, r6 @ restore LR @@ -149,10 +149,10 @@ __v7m_setup_cont: @ Configure caches (if implemented) teq r8, #0 - stmneia sp, {r0-r6, lr} @ v7m_invalidate_l1 touches r0-r6 + stmiane sp, {r0-r6, lr} @ v7m_invalidate_l1 touches r0-r6 blne v7m_invalidate_l1 teq r8, #0 @ re-evalutae condition - ldmneia sp, {r0-r6, lr} + ldmiane sp, {r0-r6, lr} @ Configure the System Control Register to ensure 8-byte stack alignment @ Note the STKALIGN bit is either RW or RAO. diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 293dcc2c441f..1ac0fbbe9f12 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/proc-xsc3.S * @@ -7,10 +8,6 @@ * Copyright 2004 (C) Intel Corp. * Copyright 2005 (C) MontaVista Software, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * MMU functions for the Intel XScale3 Core (XSC3). The XSC3 core is * an extension to Intel's original XScale core that adds the following * features: diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 3d75b7972fd1..bdb2b7749b03 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/proc-xscale.S * @@ -5,10 +6,6 @@ * Created: November 2000 * Copyright: (C) 2000, 2001 MontaVista Software Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * MMU functions for the Intel XScale CPUs * * 2001 Aug 21: diff --git a/arch/arm/mm/pv-fixup-asm.S b/arch/arm/mm/pv-fixup-asm.S index fd2ff9034d17..769778928356 100644 --- a/arch/arm/mm/pv-fixup-asm.S +++ b/arch/arm/mm/pv-fixup-asm.S @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2015 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This assembly is required to safely remap the physical address space * for Keystone 2 */ diff --git a/arch/arm/mm/tcm.h b/arch/arm/mm/tcm.h index 24101925fe64..6b80a760d875 100644 --- a/arch/arm/mm/tcm.h +++ b/arch/arm/mm/tcm.h @@ -1,6 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2008-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 * TCM memory handling for ARM systems * * Author: Linus Walleij <linus.walleij@stericsson.com> diff --git a/arch/arm/mm/tlb-fa.S b/arch/arm/mm/tlb-fa.S index d2d9ecbe0aac..def6161ec452 100644 --- a/arch/arm/mm/tlb-fa.S +++ b/arch/arm/mm/tlb-fa.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/tlb-fa.S * @@ -7,10 +8,6 @@ * Based on tlb-v4wbi.S: * Copyright (C) 1997-2002 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ARM architecture version 4, Faraday variation. * This assume an unified TLBs, with a write buffer, and branch target buffer (BTB) * diff --git a/arch/arm/mm/tlb-v4.S b/arch/arm/mm/tlb-v4.S index a2b5dca42048..b962b4e75158 100644 --- a/arch/arm/mm/tlb-v4.S +++ b/arch/arm/mm/tlb-v4.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/tlbv4.S * * Copyright (C) 1997-2002 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ARM architecture version 4 TLB handling functions. * These assume a split I/D TLBs, and no write buffer. * diff --git a/arch/arm/mm/tlb-v4wb.S b/arch/arm/mm/tlb-v4wb.S index 5a093b458dbc..9348bba7586a 100644 --- a/arch/arm/mm/tlb-v4wb.S +++ b/arch/arm/mm/tlb-v4wb.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/tlbv4wb.S * * Copyright (C) 1997-2002 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ARM architecture version 4 TLB handling functions. * These assume a split I/D TLBs w/o I TLB entry, with a write buffer. * diff --git a/arch/arm/mm/tlb-v4wbi.S b/arch/arm/mm/tlb-v4wbi.S index 058861548f68..d4f9040a4111 100644 --- a/arch/arm/mm/tlb-v4wbi.S +++ b/arch/arm/mm/tlb-v4wbi.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/tlbv4wbi.S * * Copyright (C) 1997-2002 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ARM architecture version 4 and version 5 TLB handling functions. * These assume a split I/D TLBs, with a write buffer. * diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index 6f689be638bd..5335b9687297 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/tlb-v6.S * * Copyright (C) 1997-2002 Russell King * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ARM architecture version 6 TLB handling functions. * These assume a split I/D TLB. */ diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index e5101a3bc57c..1bb28d7db567 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/mm/tlb-v7.S * * Copyright (C) 1997-2002 Russell King * Modified for ARMv7 by Catalin Marinas * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * ARM architecture version 6 TLB handling functions. * These assume a split I/D TLB. */ diff --git a/arch/arm/net/Makefile b/arch/arm/net/Makefile index c2c10841b6be..3354b3e11c3e 100644 --- a/arch/arm/net/Makefile +++ b/arch/arm/net/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # ARM-specific networking code obj-$(CONFIG_BPF_JIT) += bpf_jit_32.o diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 25b3ee85066e..adff54c312bf 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Just-In-Time compiler for eBPF filters on 32bit ARM * * Copyright (c) 2017 Shubham Bansal <illusionist.neo@gmail.com> * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; version 2 of the License. */ #include <linux/bpf.h> @@ -1083,12 +1080,17 @@ static inline void emit_ldx_r(const s8 dst[], const s8 src, /* Arithmatic Operation */ static inline void emit_ar_r(const u8 rd, const u8 rt, const u8 rm, - const u8 rn, struct jit_ctx *ctx, u8 op) { + const u8 rn, struct jit_ctx *ctx, u8 op, + bool is_jmp64) { switch (op) { case BPF_JSET: - emit(ARM_AND_R(ARM_IP, rt, rn), ctx); - emit(ARM_AND_R(ARM_LR, rd, rm), ctx); - emit(ARM_ORRS_R(ARM_IP, ARM_LR, ARM_IP), ctx); + if (is_jmp64) { + emit(ARM_AND_R(ARM_IP, rt, rn), ctx); + emit(ARM_AND_R(ARM_LR, rd, rm), ctx); + emit(ARM_ORRS_R(ARM_IP, ARM_LR, ARM_IP), ctx); + } else { + emit(ARM_ANDS_R(ARM_IP, rt, rn), ctx); + } break; case BPF_JEQ: case BPF_JNE: @@ -1096,18 +1098,25 @@ static inline void emit_ar_r(const u8 rd, const u8 rt, const u8 rm, case BPF_JGE: case BPF_JLE: case BPF_JLT: - emit(ARM_CMP_R(rd, rm), ctx); - _emit(ARM_COND_EQ, ARM_CMP_R(rt, rn), ctx); + if (is_jmp64) { + emit(ARM_CMP_R(rd, rm), ctx); + /* Only compare low halve if high halve are equal. */ + _emit(ARM_COND_EQ, ARM_CMP_R(rt, rn), ctx); + } else { + emit(ARM_CMP_R(rt, rn), ctx); + } break; case BPF_JSLE: case BPF_JSGT: emit(ARM_CMP_R(rn, rt), ctx); - emit(ARM_SBCS_R(ARM_IP, rm, rd), ctx); + if (is_jmp64) + emit(ARM_SBCS_R(ARM_IP, rm, rd), ctx); break; case BPF_JSLT: case BPF_JSGE: emit(ARM_CMP_R(rt, rn), ctx); - emit(ARM_SBCS_R(ARM_IP, rd, rm), ctx); + if (is_jmp64) + emit(ARM_SBCS_R(ARM_IP, rd, rm), ctx); break; } } @@ -1615,6 +1624,17 @@ exit: case BPF_JMP | BPF_JLT | BPF_X: case BPF_JMP | BPF_JSLT | BPF_X: case BPF_JMP | BPF_JSLE | BPF_X: + case BPF_JMP32 | BPF_JEQ | BPF_X: + case BPF_JMP32 | BPF_JGT | BPF_X: + case BPF_JMP32 | BPF_JGE | BPF_X: + case BPF_JMP32 | BPF_JNE | BPF_X: + case BPF_JMP32 | BPF_JSGT | BPF_X: + case BPF_JMP32 | BPF_JSGE | BPF_X: + case BPF_JMP32 | BPF_JSET | BPF_X: + case BPF_JMP32 | BPF_JLE | BPF_X: + case BPF_JMP32 | BPF_JLT | BPF_X: + case BPF_JMP32 | BPF_JSLT | BPF_X: + case BPF_JMP32 | BPF_JSLE | BPF_X: /* Setup source registers */ rm = arm_bpf_get_reg32(src_hi, tmp2[0], ctx); rn = arm_bpf_get_reg32(src_lo, tmp2[1], ctx); @@ -1641,6 +1661,17 @@ exit: case BPF_JMP | BPF_JLE | BPF_K: case BPF_JMP | BPF_JSLT | BPF_K: case BPF_JMP | BPF_JSLE | BPF_K: + case BPF_JMP32 | BPF_JEQ | BPF_K: + case BPF_JMP32 | BPF_JGT | BPF_K: + case BPF_JMP32 | BPF_JGE | BPF_K: + case BPF_JMP32 | BPF_JNE | BPF_K: + case BPF_JMP32 | BPF_JSGT | BPF_K: + case BPF_JMP32 | BPF_JSGE | BPF_K: + case BPF_JMP32 | BPF_JSET | BPF_K: + case BPF_JMP32 | BPF_JLT | BPF_K: + case BPF_JMP32 | BPF_JLE | BPF_K: + case BPF_JMP32 | BPF_JSLT | BPF_K: + case BPF_JMP32 | BPF_JSLE | BPF_K: if (off == 0) break; rm = tmp2[0]; @@ -1652,7 +1683,8 @@ go_jmp: rd = arm_bpf_get_reg64(dst, tmp, ctx); /* Check for the condition */ - emit_ar_r(rd[0], rd[1], rm, rn, ctx, BPF_OP(code)); + emit_ar_r(rd[0], rd[1], rm, rn, ctx, BPF_OP(code), + BPF_CLASS(code) == BPF_JMP); /* Setup JUMP instruction */ jmp_offset = bpf2a32_offset(i+off, i, ctx); diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h index f4e58bcdaa43..fb67cbc589e0 100644 --- a/arch/arm/net/bpf_jit_32.h +++ b/arch/arm/net/bpf_jit_32.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Just-In-Time compiler for BPF filters on 32bit ARM * * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; version 2 of the License. */ #ifndef PFILTER_OPCODES_ARM_H @@ -62,6 +59,7 @@ #define ARM_INST_ADDS_I 0x02900000 #define ARM_INST_AND_R 0x00000000 +#define ARM_INST_ANDS_R 0x00100000 #define ARM_INST_AND_I 0x02000000 #define ARM_INST_BIC_R 0x01c00000 @@ -172,6 +170,7 @@ #define ARM_ADC_I(rd, rn, imm) _AL3_I(ARM_INST_ADC, rd, rn, imm) #define ARM_AND_R(rd, rn, rm) _AL3_R(ARM_INST_AND, rd, rn, rm) +#define ARM_ANDS_R(rd, rn, rm) _AL3_R(ARM_INST_ANDS, rd, rn, rm) #define ARM_AND_I(rd, rn, imm) _AL3_I(ARM_INST_AND, rd, rn, imm) #define ARM_BIC_R(rd, rn, rm) _AL3_R(ARM_INST_BIC, rd, rn, rm) diff --git a/arch/arm/nwfpe/double_cpdo.c b/arch/arm/nwfpe/double_cpdo.c index c51d1386a97c..344bb7c46176 100644 --- a/arch/arm/nwfpe/double_cpdo.c +++ b/arch/arm/nwfpe/double_cpdo.c @@ -1,22 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* NetWinder Floating Point Emulator (c) Rebel.COM, 1998,1999 Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "fpa11.h" diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S index 39c20afad7ed..d8f9915566e1 100644 --- a/arch/arm/nwfpe/entry.S +++ b/arch/arm/nwfpe/entry.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* NetWinder Floating Point Emulator (c) Rebel.COM, 1998 @@ -5,19 +6,6 @@ Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <asm/assembler.h> #include <asm/opcodes.h> diff --git a/arch/arm/nwfpe/extended_cpdo.c b/arch/arm/nwfpe/extended_cpdo.c index 65a279ba927f..529b047bac0b 100644 --- a/arch/arm/nwfpe/extended_cpdo.c +++ b/arch/arm/nwfpe/extended_cpdo.c @@ -1,22 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* NetWinder Floating Point Emulator (c) Rebel.COM, 1998,1999 Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "fpa11.h" diff --git a/arch/arm/nwfpe/fpa11.c b/arch/arm/nwfpe/fpa11.c index 2782ebcc2ed3..2379e2cc7f80 100644 --- a/arch/arm/nwfpe/fpa11.c +++ b/arch/arm/nwfpe/fpa11.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* NetWinder Floating Point Emulator (c) Rebel.COM, 1998,1999 @@ -5,19 +6,6 @@ Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "fpa11.h" diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index d3a6f9298e9e..d51195d41f5b 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -1,22 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* NetWinder Floating Point Emulator (c) Rebel.com, 1998-1999 Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __FPA11_H__ diff --git a/arch/arm/nwfpe/fpa11_cpdo.c b/arch/arm/nwfpe/fpa11_cpdo.c index 2cebb1529607..631333fc555c 100644 --- a/arch/arm/nwfpe/fpa11_cpdo.c +++ b/arch/arm/nwfpe/fpa11_cpdo.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* NetWinder Floating Point Emulator (c) Rebel.COM, 1998,1999 @@ -5,19 +6,6 @@ Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "fpa11.h" diff --git a/arch/arm/nwfpe/fpa11_cpdt.c b/arch/arm/nwfpe/fpa11_cpdt.c index d31c49f953b1..cd4c57fd4ec3 100644 --- a/arch/arm/nwfpe/fpa11_cpdt.c +++ b/arch/arm/nwfpe/fpa11_cpdt.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* NetWinder Floating Point Emulator (c) Rebel.com, 1998-1999 @@ -5,19 +6,6 @@ Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "fpa11.h" diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c index 31c4eeec18b0..a8c142e45e54 100644 --- a/arch/arm/nwfpe/fpa11_cprt.c +++ b/arch/arm/nwfpe/fpa11_cprt.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* NetWinder Floating Point Emulator (c) Rebel.COM, 1998,1999 @@ -5,19 +6,6 @@ Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "fpa11.h" diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c index 1365e8650843..1122ed45944d 100644 --- a/arch/arm/nwfpe/fpmodule.c +++ b/arch/arm/nwfpe/fpmodule.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* NetWinder Floating Point Emulator @@ -6,19 +7,6 @@ Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "fpa11.h" @@ -147,7 +135,7 @@ void float_raise(signed char flags) #ifdef CONFIG_DEBUG_USER if (flags & debug) printk(KERN_DEBUG - "NWFPE: %s[%d] takes exception %08x at %pf from %08lx\n", + "NWFPE: %s[%d] takes exception %08x at %ps from %08lx\n", current->comm, current->pid, flags, __builtin_return_address(0), GET_USERREG()->ARM_pc); #endif diff --git a/arch/arm/nwfpe/fpmodule.h b/arch/arm/nwfpe/fpmodule.h index 5c2e8e48544b..77a3a60a0908 100644 --- a/arch/arm/nwfpe/fpmodule.h +++ b/arch/arm/nwfpe/fpmodule.h @@ -1,22 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* NetWinder Floating Point Emulator (c) Rebel.com, 1998-1999 Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 27/03/03 Ian Molton Clean up CONFIG_CPU */ diff --git a/arch/arm/nwfpe/fpopcode.c b/arch/arm/nwfpe/fpopcode.c index ff9834673085..c680bf1bb11f 100644 --- a/arch/arm/nwfpe/fpopcode.c +++ b/arch/arm/nwfpe/fpopcode.c @@ -1,22 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* NetWinder Floating Point Emulator (c) Rebel.COM, 1998,1999 Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "fpa11.h" diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h index 78f02dbfaa8f..5729f1e1b7db 100644 --- a/arch/arm/nwfpe/fpopcode.h +++ b/arch/arm/nwfpe/fpopcode.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* NetWinder Floating Point Emulator (c) Rebel.COM, 1998,1999 @@ -5,19 +6,6 @@ Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __FPOPCODE_H__ diff --git a/arch/arm/nwfpe/fpsr.h b/arch/arm/nwfpe/fpsr.h index bd425dc13b61..62c996fdd2c7 100644 --- a/arch/arm/nwfpe/fpsr.h +++ b/arch/arm/nwfpe/fpsr.h @@ -1,22 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* NetWinder Floating Point Emulator (c) Rebel.com, 1998-1999 Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __FPSR_H__ diff --git a/arch/arm/nwfpe/single_cpdo.c b/arch/arm/nwfpe/single_cpdo.c index c66981d682cf..4e8be20f672e 100644 --- a/arch/arm/nwfpe/single_cpdo.c +++ b/arch/arm/nwfpe/single_cpdo.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* NetWinder Floating Point Emulator (c) Rebel.COM, 1998,1999 @@ -5,19 +6,6 @@ Direct questions, comments to Scott Bambrough <scottb@netwinder.org> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "fpa11.h" diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c index a4d1f8de3b5b..b8e360299293 100644 --- a/arch/arm/plat-iop/adma.c +++ b/arch/arm/plat-iop/adma.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * platform device definitions for the iop3xx dma/xor engines * Copyright © 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * */ #include <linux/platform_device.h> #include <asm/hardware/iop3xx.h> @@ -143,7 +130,7 @@ struct platform_device iop3xx_dma_0_channel = { .resource = iop3xx_dma_0_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop3xx_dma_0_data, }, }; @@ -155,7 +142,7 @@ struct platform_device iop3xx_dma_1_channel = { .resource = iop3xx_dma_1_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop3xx_dma_1_data, }, }; @@ -167,7 +154,7 @@ struct platform_device iop3xx_aau_channel = { .resource = iop3xx_aau_resources, .dev = { .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = (void *) &iop3xx_aau_data, }, }; diff --git a/arch/arm/plat-iop/cp6.c b/arch/arm/plat-iop/cp6.c index bab73e2c79db..ec74b07fb7e3 100644 --- a/arch/arm/plat-iop/cp6.c +++ b/arch/arm/plat-iop/cp6.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * IOP Coprocessor-6 access handler * Copyright (c) 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * */ #include <linux/init.h> #include <asm/traps.h> diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c index 88215ad031a2..7a79213db3e1 100644 --- a/arch/arm/plat-iop/i2c.c +++ b/arch/arm/plat-iop/i2c.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/plat-iop/i2c.c * * Author: Nicolas Pitre <nico@cam.org> * Copyright (C) 2001 MontaVista Software, Inc. * Copyright (C) 2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/mm.h> diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index 362474b5c40d..4c42c95e4bf5 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/plat-iop/pci.c * @@ -5,10 +6,6 @@ * * Author: Rory Bolt <rorybolt@pacbell.net> * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/plat-iop/pmu.c b/arch/arm/plat-iop/pmu.c index c6d979ace524..04c44a809b32 100644 --- a/arch/arm/plat-iop/pmu.c +++ b/arch/arm/plat-iop/pmu.c @@ -1,11 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * PMU IRQ registration for the iop3xx xscale PMU families. * Copyright (C) 2010 Will Deacon, ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/platform_device.h> diff --git a/arch/arm/plat-iop/restart.c b/arch/arm/plat-iop/restart.c index 3a4d5e5fde52..cf6d3d9a2112 100644 --- a/arch/arm/plat-iop/restart.c +++ b/arch/arm/plat-iop/restart.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * restart.c * * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <asm/hardware/iop3xx.h> #include <asm/system_misc.h> diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c index 8151bde990e6..d10e0102d82c 100644 --- a/arch/arm/plat-iop/setup.c +++ b/arch/arm/plat-iop/setup.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/plat-iop/setup.c * * Author: Nicolas Pitre <nico@fluxnic.net> * Copyright (C) 2001 MontaVista Software, Inc. * Copyright (C) 2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/mm.h> diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index 2cff0010f677..f9dd1f50cfe5 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/arm/plat-iop/time.c * @@ -6,11 +7,6 @@ * Author: Deepak Saxena <dsaxena@mvista.com> * * Copyright 2002-2003 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include <linux/kernel.h> diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 7215ada707e4..371f2ed00eda 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel. # diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index fcc5bfec8bd1..7a729ade2105 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * OMAP 32ksynctimer/counter_32k-related code * @@ -6,10 +7,6 @@ * Tony Lindgren <tony@atomide.com> * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * NOTE: This timer is not the same timer as the old OMAP1 MPU timer. */ #include <linux/kernel.h> diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 48b69de89a5d..2b698d074874 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/plat-omap/debug-leds.c * * Copyright 2011 by Bryan Wu <bryan.wu@canonical.com> * Copyright 2003 by Texas Instruments Incorporated - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index d4012d6c0dcb..79f43acf9acb 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/plat-omap/dma.c * @@ -18,11 +19,6 @@ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ * Converted DMA library into DMA platform driver. * - G, Manjunath Kondaiah <manjugk@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/module.h> @@ -1449,7 +1445,6 @@ static void __exit omap_system_dma_exit(void) MODULE_DESCRIPTION("OMAP SYSTEM DMA DRIVER"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRIVER_NAME); MODULE_AUTHOR("Texas Instruments Inc"); /* diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index c9a66bf36c9a..36f4c352cc66 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * OMAP cpu type detection * @@ -8,21 +9,6 @@ * Written by Tony Lindgren <tony.lindgren@nokia.com> * * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef __ASM_ARCH_OMAP_CPU_H diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 921840acf65c..0f1eacad7fe3 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/plat-omap/sram.c * @@ -8,10 +9,6 @@ * * Copyright (C) 2009-2012 Texas Instruments * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #undef DEBUG diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index 9433605cd290..4e3f25de13c1 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for the linux kernel. # diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index a2399fd66e97..8647cb80a93b 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -18,7 +18,7 @@ #include <linux/clkdev.h> #include <linux/mv643xx_eth.h> #include <linux/mv643xx_i2c.h> -#include <net/dsa.h> +#include <linux/platform_data/dsa.h> #include <linux/platform_data/dma-mv_xor.h> #include <linux/platform_data/usb-ehci-orion.h> #include <plat/common.h> @@ -622,7 +622,7 @@ static struct platform_device orion_xor0_shared = { .resource = orion_xor0_shared_resources, .dev = { .dma_mask = &orion_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &orion_xor0_pdata, }, }; @@ -683,7 +683,7 @@ static struct platform_device orion_xor1_shared = { .resource = orion_xor1_shared_resources, .dev = { .dma_mask = &orion_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &orion_xor1_pdata, }, }; diff --git a/arch/arm/plat-pxa/Kconfig b/arch/arm/plat-pxa/Kconfig index da53395a17c6..6f7a0a39c2b9 100644 --- a/arch/arm/plat-pxa/Kconfig +++ b/arch/arm/plat-pxa/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only if PLAT_PXA config PXA_SSP diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 2f06a2e8b1dd..349ea0af8450 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Makefile for code common across different PXA processor families # diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 10bc4f3757d1..3accaa9ee781 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/plat-pxa/include/plat/mfp.h * @@ -7,10 +8,6 @@ * * 2007-8-21: eric miao <eric.miao@marvell.com> * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_PLAT_MFP_H diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index 2c4dbb1f4236..17fc4f33f35b 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/plat-pxa/mfp.c * @@ -7,10 +8,6 @@ * * 2007-08-21: eric miao <eric.miao@marvell.com> * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index f51919974183..9a6e4923bd69 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/ssp.c * @@ -6,10 +7,6 @@ * Copyright (C) 2003 Russell King. * Copyright (C) 2003 Wolfson Microelectronics PLC * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * PXA2xx SSP driver. This provides the generic core for simple * IO-based SSP applications and allows easy port setup for DMA access. * @@ -183,18 +180,12 @@ static int pxa_ssp_probe(struct platform_device *pdev) static int pxa_ssp_remove(struct platform_device *pdev) { - struct resource *res; struct ssp_device *ssp; ssp = platform_get_drvdata(pdev); if (ssp == NULL) return -ENODEV; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); - - clk_put(ssp->clk); - mutex_lock(&ssp_lock); list_del(&ssp->node); mutex_unlock(&ssp_lock); diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 98b9b8e9f698..748238f9f10e 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only if PLAT_VERSATILE config PLAT_VERSATILE_SCHED_CLOCK diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index b2f0ddfdc4cc..e856f0a4ac6e 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S index e99396dfa6f3..09d9fc30c8ca 100644 --- a/arch/arm/plat-versatile/headsmp.S +++ b/arch/arm/plat-versatile/headsmp.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/plat-versatile/headsmp.S * * Copyright (c) 2003 ARM Limited * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <linux/init.h> diff --git a/arch/arm/plat-versatile/hotplug.c b/arch/arm/plat-versatile/hotplug.c index c974958417fe..2e9dca38bec0 100644 --- a/arch/arm/plat-versatile/hotplug.c +++ b/arch/arm/plat-versatile/hotplug.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2002 ARM Ltd. * All Rights Reserved * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This hotplug implementation is _specific_ to the situation found on * ARM development platforms where there is _no_ possibility of actually * taking a CPU offline, resetting it, or otherwise. Real platforms must diff --git a/arch/arm/plat-versatile/include/plat/platsmp.h b/arch/arm/plat-versatile/include/plat/platsmp.h index 1b087fbbc700..500605f48b80 100644 --- a/arch/arm/plat-versatile/include/plat/platsmp.h +++ b/arch/arm/plat-versatile/include/plat/platsmp.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/plat-versatile/include/plat/platsmp.h * * Copyright (C) 2011 ARM Ltd. * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ extern volatile int versatile_cpu_release; diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index 6e2836243187..3567296cec2a 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/plat-versatile/platsmp.c * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This code is specific to the hardware found on ARM Realview and * Versatile Express platforms where the CPUs are unable to be individually * woken, and where there is no way to hot-unplug CPUs. Real platforms diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c index c966ae90f4a0..ecb7913d2f53 100644 --- a/arch/arm/plat-versatile/sched-clock.c +++ b/arch/arm/plat-versatile/sched-clock.c @@ -1,22 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * linux/arch/arm/plat-versatile/sched-clock.c * * Copyright (C) 1999 - 2003 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> #include <linux/io.h> diff --git a/arch/arm/probes/decode-arm.c b/arch/arm/probes/decode-arm.c index f72c33a2dcfb..746ffe483719 100644 --- a/arch/arm/probes/decode-arm.c +++ b/arch/arm/probes/decode-arm.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * * arch/arm/probes/decode-arm.c @@ -5,15 +6,6 @@ * Some code moved here from arch/arm/kernel/kprobes-arm.c * * Copyright (C) 2006, 2007 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/probes/decode-arm.h b/arch/arm/probes/decode-arm.h index b3b80f6d414b..48989c2e1759 100644 --- a/arch/arm/probes/decode-arm.h +++ b/arch/arm/probes/decode-arm.h @@ -1,15 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/probes/decode-arm.h * * Copyright 2013 Linaro Ltd. * Written by: David A. Long - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifndef _ARM_KERNEL_PROBES_ARM_H diff --git a/arch/arm/probes/decode-thumb.c b/arch/arm/probes/decode-thumb.c index 985e7dd4cac6..7b447e4c9b00 100644 --- a/arch/arm/probes/decode-thumb.c +++ b/arch/arm/probes/decode-thumb.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/probes/decode-thumb.c * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/stddef.h> diff --git a/arch/arm/probes/decode-thumb.h b/arch/arm/probes/decode-thumb.h index 8457add0a2d8..84b445b8a4f9 100644 --- a/arch/arm/probes/decode-thumb.h +++ b/arch/arm/probes/decode-thumb.h @@ -1,15 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * arch/arm/probes/decode-thumb.h * * Copyright 2013 Linaro Ltd. * Written by: David A. Long - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifndef _ARM_KERNEL_PROBES_THUMB_H diff --git a/arch/arm/probes/decode.c b/arch/arm/probes/decode.c index 880ebe0cdf19..fe81a9c21f2d 100644 --- a/arch/arm/probes/decode.c +++ b/arch/arm/probes/decode.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/probes/decode.c * @@ -5,10 +6,6 @@ * * Some contents moved here from arch/arm/include/asm/kprobes-arm.c which is * Copyright (C) 2006, 2007 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/probes/decode.h b/arch/arm/probes/decode.h index 548d622a3159..973173598992 100644 --- a/arch/arm/probes/decode.h +++ b/arch/arm/probes/decode.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/probes/decode.h * @@ -5,15 +6,6 @@ * * Some contents moved here from arch/arm/include/asm/kprobes.h which is * Copyright (C) 2006, 2007 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ #ifndef _ARM_KERNEL_PROBES_H diff --git a/arch/arm/probes/kprobes/actions-arm.c b/arch/arm/probes/kprobes/actions-arm.c index b9056d649607..c12bb1bed456 100644 --- a/arch/arm/probes/kprobes/actions-arm.c +++ b/arch/arm/probes/kprobes/actions-arm.c @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/probes/kprobes/actions-arm.c * * Copyright (C) 2006, 2007 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ /* diff --git a/arch/arm/probes/kprobes/actions-common.c b/arch/arm/probes/kprobes/actions-common.c index bd20a71cd34a..836aebe596cd 100644 --- a/arch/arm/probes/kprobes/actions-common.c +++ b/arch/arm/probes/kprobes/actions-common.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/probes/kprobes/actions-common.c * @@ -5,10 +6,6 @@ * * Some contents moved here from arch/arm/include/asm/kprobes-arm.c which is * Copyright (C) 2006, 2007 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/probes/kprobes/actions-thumb.c b/arch/arm/probes/kprobes/actions-thumb.c index 07cfd9bef340..7884fcb81c26 100644 --- a/arch/arm/probes/kprobes/actions-thumb.c +++ b/arch/arm/probes/kprobes/actions-thumb.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/probes/kprobes/actions-thumb.c * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/types.h> diff --git a/arch/arm/probes/kprobes/checkers-arm.c b/arch/arm/probes/kprobes/checkers-arm.c index 7b9817333b68..d5bd9a2a3ce9 100644 --- a/arch/arm/probes/kprobes/checkers-arm.c +++ b/arch/arm/probes/kprobes/checkers-arm.c @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/probes/kprobes/checkers-arm.c * * Copyright (C) 2014 Huawei Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/probes/kprobes/checkers-common.c b/arch/arm/probes/kprobes/checkers-common.c index 971119c29474..4d720990cf2a 100644 --- a/arch/arm/probes/kprobes/checkers-common.c +++ b/arch/arm/probes/kprobes/checkers-common.c @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/probes/kprobes/checkers-common.c * * Copyright (C) 2014 Huawei Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/probes/kprobes/checkers-thumb.c b/arch/arm/probes/kprobes/checkers-thumb.c index d608e3b9017a..18e7ea61ebb3 100644 --- a/arch/arm/probes/kprobes/checkers-thumb.c +++ b/arch/arm/probes/kprobes/checkers-thumb.c @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/probes/kprobes/checkers-thumb.c * * Copyright (C) 2014 Huawei Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/probes/kprobes/checkers.h b/arch/arm/probes/kprobes/checkers.h index cf6c9e74d666..102644841dd7 100644 --- a/arch/arm/probes/kprobes/checkers.h +++ b/arch/arm/probes/kprobes/checkers.h @@ -1,16 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/probes/kprobes/checkers.h * * Copyright (C) 2014 Huawei Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ #ifndef _ARM_KERNEL_PROBES_CHECKERS_H #define _ARM_KERNEL_PROBES_CHECKERS_H diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c index f8bd523d64d1..90b5bc723c83 100644 --- a/arch/arm/probes/kprobes/core.c +++ b/arch/arm/probes/kprobes/core.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/kernel/kprobes.c * @@ -8,15 +9,6 @@ * * Nicolas Pitre <nico@marvell.com> * Copyright (C) 2007 Marvell Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/probes/kprobes/core.h b/arch/arm/probes/kprobes/core.h index ec5d1f20a085..c3db468650ce 100644 --- a/arch/arm/probes/kprobes/core.h +++ b/arch/arm/probes/kprobes/core.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/kernel/kprobes.h * @@ -5,15 +6,6 @@ * * Some contents moved here from arch/arm/include/asm/kprobes.h which is * Copyright (C) 2006, 2007 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. */ #ifndef _ARM_KERNEL_KPROBES_H diff --git a/arch/arm/probes/kprobes/opt-arm.c b/arch/arm/probes/kprobes/opt-arm.c index 0dc23fc227ed..7a449df0b359 100644 --- a/arch/arm/probes/kprobes/opt-arm.c +++ b/arch/arm/probes/kprobes/opt-arm.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Kernel Probes Jump Optimization (Optprobes) * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * * Copyright (C) IBM Corporation, 2002, 2004 * Copyright (C) Hitachi Ltd., 2012 * Copyright (C) Huawei Inc., 2014 diff --git a/arch/arm/probes/kprobes/test-arm.c b/arch/arm/probes/kprobes/test-arm.c index 8866aedfdea2..977369f1aa48 100644 --- a/arch/arm/probes/kprobes/test-arm.c +++ b/arch/arm/probes/kprobes/test-arm.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/kernel/kprobes-test-arm.c * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/probes/kprobes/test-core.c b/arch/arm/probes/kprobes/test-core.c index cc237fa9b90f..c562832b8627 100644 --- a/arch/arm/probes/kprobes/test-core.c +++ b/arch/arm/probes/kprobes/test-core.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/kernel/kprobes-test.c * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* diff --git a/arch/arm/probes/kprobes/test-core.h b/arch/arm/probes/kprobes/test-core.h index 94285203e9f7..19a5b2add41e 100644 --- a/arch/arm/probes/kprobes/test-core.h +++ b/arch/arm/probes/kprobes/test-core.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/probes/kprobes/test-core.h * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define VERBOSE 0 /* Set to '1' for more logging of test cases */ diff --git a/arch/arm/probes/kprobes/test-thumb.c b/arch/arm/probes/kprobes/test-thumb.c index b683b4517458..456c181a7bfe 100644 --- a/arch/arm/probes/kprobes/test-thumb.c +++ b/arch/arm/probes/kprobes/test-thumb.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/probes/kprobes/test-thumb.c * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/probes/uprobes/Makefile b/arch/arm/probes/uprobes/Makefile index e1dc3d0f6d5a..57fffd7e57a2 100644 --- a/arch/arm/probes/uprobes/Makefile +++ b/arch/arm/probes/uprobes/Makefile @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_UPROBES) += core.o actions-arm.o diff --git a/arch/arm/probes/uprobes/actions-arm.c b/arch/arm/probes/uprobes/actions-arm.c index 76eb44972ebe..cedebd7d7122 100644 --- a/arch/arm/probes/uprobes/actions-arm.c +++ b/arch/arm/probes/uprobes/actions-arm.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Rabin Vincent <rabin at rab.in> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/probes/uprobes/core.c b/arch/arm/probes/uprobes/core.c index bf992264060e..c4b49b322e8a 100644 --- a/arch/arm/probes/uprobes/core.c +++ b/arch/arm/probes/uprobes/core.c @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2012 Rabin Vincent <rabin at rab.in> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> diff --git a/arch/arm/probes/uprobes/core.h b/arch/arm/probes/uprobes/core.h index 1d0c12dfbd03..332ed634d59b 100644 --- a/arch/arm/probes/uprobes/core.h +++ b/arch/arm/probes/uprobes/core.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 Rabin Vincent <rabin at rab.in> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARM_KERNEL_UPROBES_H diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl index 8edf93b4490f..aaf479a9e92d 100644 --- a/arch/arm/tools/syscall.tbl +++ b/arch/arm/tools/syscall.tbl @@ -24,7 +24,7 @@ 10 common unlink sys_unlink 11 common execve sys_execve 12 common chdir sys_chdir -13 oabi time sys_time +13 oabi time sys_time32 14 common mknod sys_mknod 15 common chmod sys_chmod 16 common lchown sys_lchown16 @@ -36,12 +36,12 @@ 22 oabi umount sys_oldumount 23 common setuid sys_setuid16 24 common getuid sys_getuid16 -25 oabi stime sys_stime +25 oabi stime sys_stime32 26 common ptrace sys_ptrace 27 oabi alarm sys_alarm # 28 was sys_fstat 29 common pause sys_pause -30 oabi utime sys_utime +30 oabi utime sys_utime32 # 31 was sys_stty # 32 was sys_gtty 33 common access sys_access @@ -137,7 +137,7 @@ 121 common setdomainname sys_setdomainname 122 common uname sys_newuname # 123 was sys_modify_ldt -124 common adjtimex sys_adjtimex +124 common adjtimex sys_adjtimex_time32 125 common mprotect sys_mprotect 126 common sigprocmask sys_sigprocmask # 127 was sys_create_module @@ -174,8 +174,8 @@ 158 common sched_yield sys_sched_yield 159 common sched_get_priority_max sys_sched_get_priority_max 160 common sched_get_priority_min sys_sched_get_priority_min -161 common sched_rr_get_interval sys_sched_rr_get_interval -162 common nanosleep sys_nanosleep +161 common sched_rr_get_interval sys_sched_rr_get_interval_time32 +162 common nanosleep sys_nanosleep_time32 163 common mremap sys_mremap 164 common setresuid sys_setresuid16 165 common getresuid sys_getresuid16 @@ -190,7 +190,7 @@ 174 common rt_sigaction sys_rt_sigaction 175 common rt_sigprocmask sys_rt_sigprocmask 176 common rt_sigpending sys_rt_sigpending -177 common rt_sigtimedwait sys_rt_sigtimedwait +177 common rt_sigtimedwait sys_rt_sigtimedwait_time32 178 common rt_sigqueueinfo sys_rt_sigqueueinfo 179 common rt_sigsuspend sys_rt_sigsuspend 180 common pread64 sys_pread64 sys_oabi_pread64 @@ -254,12 +254,12 @@ 237 common fremovexattr sys_fremovexattr 238 common tkill sys_tkill 239 common sendfile64 sys_sendfile64 -240 common futex sys_futex +240 common futex sys_futex_time32 241 common sched_setaffinity sys_sched_setaffinity 242 common sched_getaffinity sys_sched_getaffinity 243 common io_setup sys_io_setup 244 common io_destroy sys_io_destroy -245 common io_getevents sys_io_getevents +245 common io_getevents sys_io_getevents_time32 246 common io_submit sys_io_submit 247 common io_cancel sys_io_cancel 248 common exit_group sys_exit_group @@ -272,26 +272,26 @@ # 255 for get_thread_area 256 common set_tid_address sys_set_tid_address 257 common timer_create sys_timer_create -258 common timer_settime sys_timer_settime -259 common timer_gettime sys_timer_gettime +258 common timer_settime sys_timer_settime32 +259 common timer_gettime sys_timer_gettime32 260 common timer_getoverrun sys_timer_getoverrun 261 common timer_delete sys_timer_delete -262 common clock_settime sys_clock_settime -263 common clock_gettime sys_clock_gettime -264 common clock_getres sys_clock_getres -265 common clock_nanosleep sys_clock_nanosleep +262 common clock_settime sys_clock_settime32 +263 common clock_gettime sys_clock_gettime32 +264 common clock_getres sys_clock_getres_time32 +265 common clock_nanosleep sys_clock_nanosleep_time32 266 common statfs64 sys_statfs64_wrapper 267 common fstatfs64 sys_fstatfs64_wrapper 268 common tgkill sys_tgkill -269 common utimes sys_utimes +269 common utimes sys_utimes_time32 270 common arm_fadvise64_64 sys_arm_fadvise64_64 271 common pciconfig_iobase sys_pciconfig_iobase 272 common pciconfig_read sys_pciconfig_read 273 common pciconfig_write sys_pciconfig_write 274 common mq_open sys_mq_open 275 common mq_unlink sys_mq_unlink -276 common mq_timedsend sys_mq_timedsend -277 common mq_timedreceive sys_mq_timedreceive +276 common mq_timedsend sys_mq_timedsend_time32 +277 common mq_timedreceive sys_mq_timedreceive_time32 278 common mq_notify sys_mq_notify 279 common mq_getsetattr sys_mq_getsetattr 280 common waitid sys_waitid @@ -314,19 +314,19 @@ 297 common recvmsg sys_recvmsg 298 common semop sys_semop sys_oabi_semop 299 common semget sys_semget -300 common semctl sys_semctl +300 common semctl sys_old_semctl 301 common msgsnd sys_msgsnd 302 common msgrcv sys_msgrcv 303 common msgget sys_msgget -304 common msgctl sys_msgctl +304 common msgctl sys_old_msgctl 305 common shmat sys_shmat 306 common shmdt sys_shmdt 307 common shmget sys_shmget -308 common shmctl sys_shmctl +308 common shmctl sys_old_shmctl 309 common add_key sys_add_key 310 common request_key sys_request_key 311 common keyctl sys_keyctl -312 common semtimedop sys_semtimedop sys_oabi_semtimedop +312 common semtimedop sys_semtimedop_time32 sys_oabi_semtimedop 313 common vserver 314 common ioprio_set sys_ioprio_set 315 common ioprio_get sys_ioprio_get @@ -340,7 +340,7 @@ 323 common mkdirat sys_mkdirat 324 common mknodat sys_mknodat 325 common fchownat sys_fchownat -326 common futimesat sys_futimesat +326 common futimesat sys_futimesat_time32 327 common fstatat64 sys_fstatat64 sys_oabi_fstatat64 328 common unlinkat sys_unlinkat 329 common renameat sys_renameat @@ -349,8 +349,8 @@ 332 common readlinkat sys_readlinkat 333 common fchmodat sys_fchmodat 334 common faccessat sys_faccessat -335 common pselect6 sys_pselect6 -336 common ppoll sys_ppoll +335 common pselect6 sys_pselect6_time32 +336 common ppoll sys_ppoll_time32 337 common unshare sys_unshare 338 common set_robust_list sys_set_robust_list 339 common get_robust_list sys_get_robust_list @@ -362,13 +362,13 @@ 345 common getcpu sys_getcpu 346 common epoll_pwait sys_epoll_pwait 347 common kexec_load sys_kexec_load -348 common utimensat sys_utimensat +348 common utimensat sys_utimensat_time32 349 common signalfd sys_signalfd 350 common timerfd_create sys_timerfd_create 351 common eventfd sys_eventfd 352 common fallocate sys_fallocate -353 common timerfd_settime sys_timerfd_settime -354 common timerfd_gettime sys_timerfd_gettime +353 common timerfd_settime sys_timerfd_settime32 +354 common timerfd_gettime sys_timerfd_gettime32 355 common signalfd4 sys_signalfd4 356 common eventfd2 sys_eventfd2 357 common epoll_create1 sys_epoll_create1 @@ -379,14 +379,14 @@ 362 common pwritev sys_pwritev 363 common rt_tgsigqueueinfo sys_rt_tgsigqueueinfo 364 common perf_event_open sys_perf_event_open -365 common recvmmsg sys_recvmmsg +365 common recvmmsg sys_recvmmsg_time32 366 common accept4 sys_accept4 367 common fanotify_init sys_fanotify_init 368 common fanotify_mark sys_fanotify_mark 369 common prlimit64 sys_prlimit64 370 common name_to_handle_at sys_name_to_handle_at 371 common open_by_handle_at sys_open_by_handle_at -372 common clock_adjtime sys_clock_adjtime +372 common clock_adjtime sys_clock_adjtime32 373 common syncfs sys_syncfs 374 common sendmmsg sys_sendmmsg 375 common setns sys_setns @@ -413,4 +413,37 @@ 396 common pkey_free sys_pkey_free 397 common statx sys_statx 398 common rseq sys_rseq -399 common io_pgetevents sys_io_pgetevents +399 common io_pgetevents sys_io_pgetevents_time32 +400 common migrate_pages sys_migrate_pages +401 common kexec_file_load sys_kexec_file_load +# 402 is unused +403 common clock_gettime64 sys_clock_gettime +404 common clock_settime64 sys_clock_settime +405 common clock_adjtime64 sys_clock_adjtime +406 common clock_getres_time64 sys_clock_getres +407 common clock_nanosleep_time64 sys_clock_nanosleep +408 common timer_gettime64 sys_timer_gettime +409 common timer_settime64 sys_timer_settime +410 common timerfd_gettime64 sys_timerfd_gettime +411 common timerfd_settime64 sys_timerfd_settime +412 common utimensat_time64 sys_utimensat +413 common pselect6_time64 sys_pselect6 +414 common ppoll_time64 sys_ppoll +416 common io_pgetevents_time64 sys_io_pgetevents +417 common recvmmsg_time64 sys_recvmmsg +418 common mq_timedsend_time64 sys_mq_timedsend +419 common mq_timedreceive_time64 sys_mq_timedreceive +420 common semtimedop_time64 sys_semtimedop +421 common rt_sigtimedwait_time64 sys_rt_sigtimedwait +422 common futex_time64 sys_futex +423 common sched_rr_get_interval_time64 sys_sched_rr_get_interval +424 common pidfd_send_signal sys_pidfd_send_signal +425 common io_uring_setup sys_io_uring_setup +426 common io_uring_enter sys_io_uring_enter +427 common io_uring_register sys_io_uring_register +428 common open_tree sys_open_tree +429 common move_mount sys_move_mount +430 common fsopen sys_fsopen +431 common fsconfig sys_fsconfig +432 common fsmount sys_fsmount +433 common fspick sys_fspick diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile index f4efff9d3afb..1f5ec9741e6d 100644 --- a/arch/arm/vdso/Makefile +++ b/arch/arm/vdso/Makefile @@ -10,12 +10,13 @@ obj-vdso := $(addprefix $(obj)/, $(obj-vdso)) ccflags-y := -fPIC -fno-common -fno-builtin -fno-stack-protector ccflags-y += -DDISABLE_BRANCH_PROFILING -VDSO_LDFLAGS := -Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1 -VDSO_LDFLAGS += -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096 -VDSO_LDFLAGS += -nostdlib -shared -VDSO_LDFLAGS += $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) -VDSO_LDFLAGS += $(call cc-ldoption, -Wl$(comma)--build-id) -VDSO_LDFLAGS += $(call cc-ldoption, -fuse-ld=bfd) +ldflags-$(CONFIG_CPU_ENDIAN_BE8) := --be8 +ldflags-y := -Bsymbolic --no-undefined -soname=linux-vdso.so.1 \ + -z max-page-size=4096 -z common-page-size=4096 \ + -nostdlib -shared $(ldflags-y) \ + $(call ld-option, --hash-style=sysv) \ + $(call ld-option, --build-id) \ + -T obj-$(CONFIG_VDSO) += vdso.o extra-$(CONFIG_VDSO) += vdso.lds @@ -37,8 +38,8 @@ KCOV_INSTRUMENT := n $(obj)/vdso.o : $(obj)/vdso.so # Link rule for the .so file -$(obj)/vdso.so.raw: $(src)/vdso.lds $(obj-vdso) FORCE - $(call if_changed,vdsold) +$(obj)/vdso.so.raw: $(obj)/vdso.lds $(obj-vdso) FORCE + $(call if_changed,ld) $(obj)/vdso.so.dbg: $(obj)/vdso.so.raw $(obj)/vdsomunge FORCE $(call if_changed,vdsomunge) @@ -48,11 +49,6 @@ $(obj)/%.so: OBJCOPYFLAGS := -S $(obj)/%.so: $(obj)/%.so.dbg FORCE $(call if_changed,objcopy) -# Actual build commands -quiet_cmd_vdsold = VDSO $@ - cmd_vdsold = $(CC) $(c_flags) $(VDSO_LDFLAGS) \ - -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@ - quiet_cmd_vdsomunge = MUNGE $@ cmd_vdsomunge = $(objtree)/$(obj)/vdsomunge $< $@ diff --git a/arch/arm/vdso/vdso.S b/arch/arm/vdso/vdso.S index a62a7b64f49c..65f2e6f863ba 100644 --- a/arch/arm/vdso/vdso.S +++ b/arch/arm/vdso/vdso.S @@ -1,20 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Adapted from arm64 version. * * Copyright (C) 2012 ARM Limited * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * * Author: Will Deacon <will.deacon@arm.com> */ diff --git a/arch/arm/vdso/vdso.lds.S b/arch/arm/vdso/vdso.lds.S index 89ca89f12d23..73cf205b003e 100644 --- a/arch/arm/vdso/vdso.lds.S +++ b/arch/arm/vdso/vdso.lds.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Adapted from arm64 version. * @@ -5,18 +6,6 @@ * * Copyright (C) 2012 ARM Limited * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * * Author: Will Deacon <will.deacon@arm.com> * Heavily based on the vDSO linker scripts for other archs. */ diff --git a/arch/arm/vdso/vdsomunge.c b/arch/arm/vdso/vdsomunge.c index f6455273b2f8..1977869d8025 100644 --- a/arch/arm/vdso/vdsomunge.c +++ b/arch/arm/vdso/vdsomunge.c @@ -1,20 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2015 Mentor Graphics Corporation. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 of the - * License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * * vdsomunge - Host program which produces a shared object * architecturally specified to be usable by both soft- and hard-float * programs. diff --git a/arch/arm/vdso/vgettimeofday.c b/arch/arm/vdso/vgettimeofday.c index a9dd619c6c29..d1fdbb12760a 100644 --- a/arch/arm/vdso/vgettimeofday.c +++ b/arch/arm/vdso/vgettimeofday.c @@ -1,26 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2015 Mentor Graphics Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 of the - * License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/compiler.h> #include <linux/hrtimer.h> #include <linux/time.h> -#include <asm/arch_timer.h> #include <asm/barrier.h> #include <asm/bug.h> +#include <asm/cp15.h> #include <asm/page.h> #include <asm/unistd.h> #include <asm/vdso_datapage.h> @@ -123,7 +111,8 @@ static notrace u64 get_ns(struct vdso_data *vdata) u64 cycle_now; u64 nsec; - cycle_now = arch_counter_get_cntvct(); + isb(); + cycle_now = read_sysreg(CNTVCT); cycle_delta = (cycle_now - vdata->cs_cycle_last) & vdata->cs_mask; diff --git a/arch/arm/vfp/Makefile b/arch/arm/vfp/Makefile index 94516c40ebd3..9975b63ac3b0 100644 --- a/arch/arm/vfp/Makefile +++ b/arch/arm/vfp/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # linux/arch/arm/vfp/Makefile # diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 2e78760f3495..0186cf9da890 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/vfp/entry.S * * Copyright (C) 2004 ARM Limited. * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/linkage.h> diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index 89773e5ddf35..5cd6d5053271 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/vfp/vfp.h * * Copyright (C) 2004 ARM Limited. * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ static inline u32 vfp_shiftright32jamming(u32 val, unsigned int shift) diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index f74a8f7e5f84..b2e560290860 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/vfp/vfphw.S * * Copyright (C) 2004 ARM Limited. * Written by Deep Blue Solutions Limited. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * This code is called from the kernel's undefined instruction trap. * r9 holds the return address for successful handling. * lr holds the return address for unrecognised instructions. diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h index 15b95b5ab97e..38dc154e39ff 100644 --- a/arch/arm/vfp/vfpinstr.h +++ b/arch/arm/vfp/vfpinstr.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/vfp/vfpinstr.h * * Copyright (C) 2004 ARM Limited. * Written by Deep Blue Solutions Limited. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * VFP instruction masks. */ #define INST_CPRTDO(inst) (((inst) & 0x0f000000) == 0x0e000000) diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index ee7b07938dd5..8c9e7f9f0277 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/vfp/vfpmodule.c * * Copyright (C) 2004 ARM Limited. * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/types.h> #include <linux/cpu.h> diff --git a/arch/arm/xen/Makefile b/arch/arm/xen/Makefile index 227952103b0b..7ed28982c4c3 100644 --- a/arch/arm/xen/Makefile +++ b/arch/arm/xen/Makefile @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-y := enlighten.o hypercall.o grant-table.o p2m.o mm.o obj-$(CONFIG_XEN_EFI) += efi.o diff --git a/arch/arm/xen/efi.c b/arch/arm/xen/efi.c index b4d78959cadf..d687a73044bf 100644 --- a/arch/arm/xen/efi.c +++ b/arch/arm/xen/efi.c @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (c) 2015, Linaro Limited, Shannon Zhao - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/efi.h> diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 17e478928276..1e57692552d9 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only #include <xen/xen.h> #include <xen/events.h> #include <xen/grant_table.h> diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index b0b80c0f09f3..b11bba542fac 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -113,8 +113,7 @@ ENTRY(privcmd_call) /* * Disable userspace access from kernel. This is fine to do it - * unconditionally as no set_fs(KERNEL_DS)/set_fs(get_ds()) is - * called before. + * unconditionally as no set_fs(KERNEL_DS) is called before. */ uaccess_disable r4 diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index e1d44b903dfc..d33b77e9add3 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only #include <linux/cpu.h> #include <linux/dma-mapping.h> #include <linux/gfp.h> diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index e70a49fc8dcd..e52950a43f2e 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only #include <linux/memblock.h> #include <linux/gfp.h> #include <linux/export.h> @@ -70,8 +71,9 @@ unsigned long __pfn_to_mfn(unsigned long pfn) entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys); if (entry->pfn <= pfn && entry->pfn + entry->nr_pages > pfn) { + unsigned long mfn = entry->mfn + (pfn - entry->pfn); read_unlock_irqrestore(&p2m_lock, irqflags); - return entry->mfn + (pfn - entry->pfn); + return mfn; } if (pfn < entry->pfn) n = n->rb_left; @@ -156,6 +158,7 @@ bool __set_phys_to_machine_multi(unsigned long pfn, rc = xen_add_phys_to_mach_entry(p2m_entry); if (rc < 0) { write_unlock_irqrestore(&p2m_lock, irqflags); + kfree(p2m_entry); return false; } write_unlock_irqrestore(&p2m_lock, irqflags); |