diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti')
78 files changed, 8696 insertions, 864 deletions
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index c83c9d772b81..6dd7b6f1d6ab 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -10,7 +10,14 @@ # Boards with AM62x SoC dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb # Boards with AM62Ax SoC @@ -22,12 +29,14 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb # Boards with AM65x SoC +k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb # Boards with J7200 SoC k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts index 4b94f7a86316..5e6feb8cd125 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -73,19 +73,19 @@ }; &main_pmx0 { - vddshv_sdio_pins_default: vddshv-sdio-pins-default { + vddshv_sdio_pins_default: vddshv-sdio-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ >; }; - main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-pins-default { + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */ >; }; - pmic_irq_pins_default: pmic-irq-pins-default { + pmic_irq_pins_default: pmic-irq-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (B16) EXTINTn */ >; diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index b3e4857bbbe4..2488e3a537fe 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -184,6 +184,21 @@ dma-names = "tx", "rx1", "rx2"; }; + secure_proxy_sa3: mailbox@43600000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x43600000 0x00 0x10000>, + <0x00 0x44880000 0x00 0x20000>, + <0x00 0x44860000 0x00 0x20000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + main_pmx0: pinctrl@f4000 { compatible = "pinctrl-single"; reg = <0x00 0xf4000 0x00 0x2ac>; @@ -192,6 +207,12 @@ pinctrl-single,function-mask = <0xffffffff>; }; + main_esm: esm@420000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x420000 0x00 0x1000>; + ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>; + }; + main_timer0: timer@2400000 { compatible = "ti,am654-timer"; reg = <0x00 0x2400000 0x00 0x400>; diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi index 076601a41e84..19fc38157d94 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi @@ -14,6 +14,12 @@ pinctrl-single,function-mask = <0xffffffff>; }; + mcu_esm: esm@4100000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x4100000 0x00 0x1000>; + ti,esm-pins = <0>, <1>, <2>, <85>; + }; + /* * The MCU domain timer interrupts are routed only to the ESM module, * and not currently available for Linux. The MCU domain timers are diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi new file mode 100644 index 000000000000..aa43e7407eee --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * Product homepage: + * https://www.phytec.com/product/phycore-am62x + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "PHYTEC phyCORE-AM62x"; + compatible = "phytec,am62-phycore-som", "ti,am625"; + + aliases { + ethernet0 = &cpsw_port1; + gpio0 = &main_gpio0; + gpio1 = &main_gpio1; + i2c0 = &main_i2c0; + mmc0 = &sdhci0; + rtc0 = &i2c_som_rtc; + rtc1 = &wkup_rtc0; + spi0 = &ospi0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@9ca00000 { + compatible = "ramoops"; + reg = <0x00 0x9ca00000 0x00 0x00100000>; + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x00>; + pmsg-size = <0x8000>; + }; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + alignment = <0x1000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9db00000 0x00 0x00c00000>; + no-map; + }; + }; + + vcc_5v0_som: regulator-vcc-5v0-som { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V0_SOM"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_5v0_som>; + regulator-always-on; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + }; +}; + +&main_pmx0 { + leds_pins_default: leds-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x034, PIN_OUTPUT, 7) /* (H21) OSPI0_CSN2.GPIO0_13 */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ + AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ + >; + }; + + main_mdio1_pins_default: main-mdio1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */ + AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */ + >; + }; + + main_mmc0_pins_default: main-mmc0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + + main_rgmii1_pins_default: main-rgmii1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ + AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ + AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */ + AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */ + AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */ + AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */ + AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */ + AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */ + AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */ + AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */ + AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */ + AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */ + >; + }; + + ospi0_pins_default: ospi0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ + AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ + AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */ + AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */ + AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */ + AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */ + AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */ + AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */ + AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */ + AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ + AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (D16) EXTINTn */ + >; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy1>; +}; + +&cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins_default>; + status = "okay"; + + cpsw3g_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vcc_5v0_som>; + buck2-supply = <&vcc_5v0_som>; + buck3-supply = <&vcc_5v0_som>; + ldo1-supply = <&vdd_3v3>; + ldo2-supply = <&vdd_1v8>; + ldo3-supply = <&vcc_5v0_som>; + ldo4-supply = <&vcc_5v0_som>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + ti,power-button; + system-power-controller; + + regulators { + vdd_core: buck1 { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_3v3: buck2 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_ddr4: buck3 { + regulator-name = "VDD_DDR4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + vddshv5_sdio: ldo1 { + regulator-name = "VDDSHV5_SDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + vddr_core: ldo2 { + regulator-name = "VDDR_CORE"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + vdda_1v8: ldo3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_2v5: ldo4 { + regulator-name = "VDD_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x50>; + }; + + i2c_som_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + status = "okay"; + + serial_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + }; +}; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; + non-removable; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi new file mode 100644 index 000000000000..a358757e26f0 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +thermal_zones: thermal-zones { + main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + main0_crit: main0-crit { + temperature = <105000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + main1_crit: main1-crit { + temperature = <105000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi new file mode 100644 index 000000000000..3abd8d1d6761 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM on Dahlia carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit + */ + +/* Verdin ETHs */ +&cpsw3g { + status = "okay"; +}; + +/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */ +&cpsw3g_mdio { + status = "okay"; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&cpsw_port1 { + status = "okay"; +}; + +/* Verdin PWM_1, PWM_2 */ +&epwm0 { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&epwm1 { + status = "okay"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>, + <&pinctrl_gpio_5>, + <&pinctrl_gpio_6>, + <&pinctrl_gpio_7>, + <&pinctrl_gpio_8>; +}; + +/* Verdin I2C_1 */ +&main_i2c1 { + status = "okay"; + + /* Current measurement into module VCC */ + hwmon@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <10000>; + }; + + /* Temperature sensor */ + sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + }; + + /* EEPROM */ + eeprom@57 { + compatible = "st,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Verdin I2C_2_DSI */ +&main_i2c2 { + status = "okay"; +}; + +/* Verdin I2C_4_CSI */ +&main_i2c3 { + status = "okay"; +}; + +/* Verdin CAN_1 */ +&main_mcan0 { + status = "okay"; +}; + +/* Verdin SPI_1 */ +&main_spi1 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&main_uart0 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&main_uart1 { + status = "okay"; +}; + +/* Verdin I2S_1 */ +&mcasp0 { + status = "okay"; +}; + +&mcu_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_1>, + <&pinctrl_gpio_2>, + <&pinctrl_gpio_3>, + <&pinctrl_gpio_4>; +}; + +/* Verdin I2C_3_HDMI */ +&mcu_i2c0 { + status = "okay"; +}; + +/* Verdin UART_4 */ +&mcu_uart0 { + status = "okay"; +}; + +/* Verdin QSPI_1 */ +&ospi0 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&sdhci1 { + ti,driver-strength-ohm = <33>; + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbss0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbss1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +/* Verdin CTRL_WAKE1_MICO# */ +&verdin_gpio_keys { + status = "okay"; +}; + +/* Verdin UART_2 */ +&wkup_uart0 { + /* FIXME: WKUP UART0 is used by DM firmware */ + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi new file mode 100644 index 000000000000..846caee7dfa4 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM on Development carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/verdin-development-board-kit + */ + +/* Verdin ETHs */ +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1>, <&pinctrl_rgmii2>; + status = "okay"; +}; + +/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */ +&cpsw3g_mdio { + status = "okay"; + + cpsw3g_phy1: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + interrupt-parent = <&main_gpio0>; + interrupts = <38 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth2_rgmii_int>; + micrel,led-mode = <0>; + }; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&cpsw_port1 { + status = "okay"; +}; + +/* Verdin ETH_2_RGMII */ +&cpsw_port2 { + phy-handle = <&cpsw3g_phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +/* Verdin PWM_1, PWM_2 */ +&epwm0 { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&epwm1 { + status = "okay"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>, + <&pinctrl_gpio_5>, + <&pinctrl_gpio_6>, + <&pinctrl_gpio_7>, + <&pinctrl_gpio_8>; +}; + +/* Verdin I2C_1 */ +&main_i2c1 { + status = "okay"; + + /* IO Expander */ + gpio_expander_21: gpio@21 { + compatible = "nxp,pcal6416"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + }; + + /* Current measurement into module VCC */ + hwmon@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <10000>; + }; + + /* Temperature sensor */ + sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + }; + + /* EEPROM */ + eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Verdin I2C_2_DSI */ +&main_i2c2 { + status = "okay"; +}; + +/* Verdin I2C_4_CSI */ +&main_i2c3 { + status = "okay"; +}; + +/* Verdin CAN_1 */ +&main_mcan0 { + status = "okay"; +}; + +/* Verdin SPI_1 */ +&main_spi1 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&main_uart0 { + status = "okay"; +}; + +/* Verdin UART_1, connector X50 through RS485 transceiver. */ +&main_uart1 { + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + status = "okay"; +}; + +/* Verdin I2S_1 */ +&mcasp0 { + status = "okay"; +}; + +&mcu_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_1>, + <&pinctrl_gpio_2>, + <&pinctrl_gpio_3>, + <&pinctrl_gpio_4>; +}; + +/* Verdin I2C_3_HDMI */ +&mcu_i2c0 { + status = "okay"; +}; + +/* Verdin UART_4 */ +&mcu_uart0 { + status = "okay"; +}; + +/* Verdin QSPI_1 */ +&ospi0 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&sdhci1 { + ti,driver-strength-ohm = <33>; + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbss0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbss1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +/* Verdin CTRL_WAKE1_MICO# */ +&verdin_gpio_keys { + status = "okay"; +}; + +/* Verdin UART_2 */ +&wkup_uart0 { + /* FIXME: WKUP UART0 is used by DM firmware */ + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi new file mode 100644 index 000000000000..68d07695e1db --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM non-WB variant + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + */ + +&sdhci2 { + pinctrl-0 = <&pinctrl_sdhci2>; + bus-width = <4>; + status = "disabled"; +}; + +&main_uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi new file mode 100644 index 000000000000..90ddc71bcd30 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM WB variant + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + */ + +/ { + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_en>; + reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_LOW>; + }; +}; + +/* On-module Wi-Fi */ +&sdhci2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci2>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + ti,fails-without-test-cd; + ti,driver-strength-ohm = <50>; + vmmc-supply = <®_3v3>; + status = "okay"; +}; + +/* On-module Bluetooth */ +&main_uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi new file mode 100644 index 000000000000..cb11d6e7f525 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM on Yavia carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/yavia + */ + +#include <dt-bindings/leds/common.h> + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_clk_gpio>, + <&pinctrl_qspi1_cs_gpio>, + <&pinctrl_qspi1_io0_gpio>, + <&pinctrl_qspi1_io1_gpio>, + <&pinctrl_qspi1_io2_gpio>, + <&pinctrl_qspi1_io3_gpio>; + + /* SODIMM 52 - LD1_RED */ + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 54 - LD1_GREEN */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 56 - LD1_BLUE */ + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 58 - LD2_RED */ + led-3 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 60 - LD2_GREEN */ + led-4 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>; + }; + /* SODIMM 62 - LD2_BLUE */ + led-5 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* Verdin ETHs */ +&cpsw3g { + status = "okay"; +}; + +/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */ +&cpsw3g_mdio { + status = "okay"; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&cpsw_port1 { + status = "okay"; +}; + +/* Verdin PWM_1, PWM_2 */ +&epwm0 { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&epwm1 { + status = "okay"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>, + <&pinctrl_gpio_5>, + <&pinctrl_gpio_6>, + <&pinctrl_gpio_7>, + <&pinctrl_gpio_8>, + <&pinctrl_qspi1_cs2_gpio>; +}; + +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>; +}; + +/* Verdin I2C_1 */ +&main_i2c1 { + status = "okay"; + + /* Temperature sensor */ + sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + }; + + /* EEPROM */ + eeprom@57 { + compatible = "st,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Verdin I2C_2_DSI */ +&main_i2c2 { + status = "okay"; +}; + +/* Verdin I2C_4_CSI */ +&main_i2c3 { + status = "okay"; +}; + +/* Verdin CAN_1 */ +&main_mcan0 { + status = "okay"; +}; + +/* Verdin SPI_1 */ +&main_spi1 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&main_uart0 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&main_uart1 { + status = "okay"; +}; + +&mcu_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_1>, + <&pinctrl_gpio_2>, + <&pinctrl_gpio_3>, + <&pinctrl_gpio_4>; +}; + +/* Verdin I2C_3_HDMI */ +&mcu_i2c0 { + status = "okay"; +}; + +/* Verdin UART_4 */ +&mcu_uart0 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&sdhci1 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbss0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbss1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +/* Verdin CTRL_WAKE1_MICO# */ +&verdin_gpio_keys { + status = "okay"; +}; + +/* Verdin UART_2 */ +&wkup_uart0 { + /* FIXME: WKUP UART0 is used by DM firmware */ + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi new file mode 100644 index 000000000000..57dd061911ab --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi @@ -0,0 +1,1401 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; + i2c0 = &main_i2c0; + i2c1 = &main_i2c1; + i2c2 = &main_i2c2; + i2c3 = &mcu_i2c0; + i2c4 = &main_i2c3; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + mmc2 = &sdhci2; + rtc0 = &rtc_i2c; + rtc1 = &wkup_rtc0; + serial0 = &main_uart1; + serial1 = &wkup_uart0; + serial2 = &main_uart0; + serial3 = &mcu_uart0; + serial4 = &main_uart5; + usb0 = &usb0; + usb1 = &usb1; + }; + + verdin_gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_wake1_mico>; + status = "disabled"; + + verdin_key_wakeup: key-wakeup { + debounce-interval = <10>; + /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ + gpios = <&main_gpio0 32 GPIO_ACTIVE_LOW>; + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0x00000000 0x40000000>; /* 1G RAM */ + }; + + opp-table { + /* Add 1.4GHz OPP. Requires VDD_CORE to be at 0.85V */ + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-supported-hw = <0x01 0x0004>; + clock-latency-ns = <6000000>; + }; + }; + + /* Module Power Supply */ + reg_vsodimm: regulator-vsodimm { + compatible = "regulator-fixed"; + regulator-name = "+V_SODIMM"; + }; + + /* Non PMIC On-module Supplies */ + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "On-module +V3.3"; + vin-supply = <®_vsodimm>; + }; + + reg_1v2_dsi: regulator-1v2-dsi { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "On-module +V1.2_DSI"; + vin-supply = <®_1v8>; + }; + + /* Enabled by +V1.2_DSI */ + reg_1v8_dsi: regulator-1v8-dsi { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V1.8_DSI"; + vin-supply = <®_1v8>; + }; + + /* Enabled by +V2.5_ETH */ + reg_1v0_eth: regulator-1v0-eth { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <1000000>; + regulator-name = "On-module +V1.0_ETH"; + vin-supply = <®_1v8>; + }; + + /* Enabled by +V2.5_ETH */ + reg_1v8_eth: regulator-1v8-eth { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V1.8_ETH"; + vin-supply = <®_1v8>; + }; + + /* Verdin SD_1 Power Supply */ + reg_sdhc1_vmmc: regulator-sdhci1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1_pwr_en>; + enable-active-high; + /* Verdin SD_1_PWR_EN (SODIMM 76) */ + gpio = <&main_gpio0 29 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <100000>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SD"; + startup-delay-us = <2000>; + }; + + reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vsel_sd>; + /* PMIC_VSEL_SD */ + gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>; + regulator-name = "LDO1-VSEL-SD (PMIC)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <1800000 0x0>, + <3300000 0x1>; + vin-supply = <®_sd_3v3_1v8>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + alignment = <0x1000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9db00000 0x00 0xc00000>; + no-map; + }; + }; +}; + +&main_pmx0 { + /* Verdin PWM_1 */ + pinctrl_epwm0_a: main-epwm0a-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01b4, PIN_OUTPUT, 2) /* (A13) SPI0_CS0.EHRPWM0_A */ /* SODIMM 15 */ + >; + }; + + /* Verdin PWM_2 */ + pinctrl_epwm0_b: main-epwm0b-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01b8, PIN_OUTPUT, 2) /* (C13) SPI0_CS1.EHRPWM0_B */ /* SODIMM 16 */ + >; + }; + + /* Verdin PWM_3_DSI */ + pinctrl_epwm1_a: main-epwm1a-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01bc, PIN_OUTPUT, 2) /* (A14) SPI0_CLK.EHRPWM1_A */ /* SODIMM 19 */ + >; + }; + + /* Verdin QSPI_1_CLK as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_clk_gpio: main-gpio0-0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0000, PIN_INPUT, 7) /* (H24) OSPI0_CLK.GPIO0_0 */ /* SODIMM 52 */ + >; + }; + + /* Verdin QSPI_1_IO0 as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_io0_gpio: main-gpio0-3-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */ /* SODIMM 56 */ + >; + }; + + /* Verdin QSPI_1_IO1 as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_io1_gpio: main-gpio0-4-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */ /* SODIMM 58 */ + >; + }; + + /* Verdin QSPI_1_IO2 as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_io2_gpio: main-gpio0-5-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */ /* SODIMM 60 */ + >; + }; + + /* Verdin QSPI_1_IO3 as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_io3_gpio: main-gpio0-6-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */ /* SODIMM 62 */ + >; + }; + + /* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */ /* SODIMM 54 */ + >; + }; + + /* Verdin QSPI_1_CS2# as GPIO (conflict with Verdin QSPI_1 interface) */ + pinctrl_qspi1_cs2_gpio: main-gpio0-12-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */ /* SODIMM 64 */ + >; + }; + + /* WiFi_W_WKUP_HOST# */ + pinctrl_wifi_w_wkup_host: main-gpio0-15-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x003c, PIN_INPUT, 7) /* (M25) GPMC0_AD0.GPIO0_15 */ /* SODIMM 174 */ + >; + }; + + /* WiFi_BT_WKUP_HOST# */ + pinctrl_bt_wkup_host: main-gpio0-16-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */ /* SODIMM 172 */ + >; + }; + + /* PMIC_ETH_RESET# */ + pinctrl_eth_reset: main-gpio0-17-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0044, PIN_INPUT, 7) /* (N24) GPMC0_AD2.GPIO0_17 */ + >; + }; + + /* PMIC_BRIDGE_RESET# */ + pinctrl_bridge_reset: main-gpio0-20-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0050, PIN_INPUT, 7) /* (P22) GPMC0_AD5.GPIO0_20 */ + >; + }; + + /* PMIC_VSEL_SD */ + pinctrl_vsel_sd: main-gpio0-21-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0054, PIN_INPUT, 7) /* (P21) GPMC0_AD6.GPIO0_21 */ + >; + }; + + /* PMIC_EN_WIFI */ + pinctrl_wifi_en: main-gpio0-22-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0058, PIN_INPUT, 7) /* (R23) GPMC0_AD7.GPIO0_22 */ + >; + }; + + /* PMIC_ETH_INT# */ + pinctrl_eth_int: main-gpio0-25-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0064, PIN_INPUT_PULLUP, 7) /* (T25) GPMC0_AD10.GPIO0_25 */ + >; + }; + + /* WiFi_WKUP_BT# */ + pinctrl_wifi_wkup_bt: main-gpio0-26-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0068, PIN_INPUT, 7) /* (R21) GPMC0_AD11.GPIO0_26 */ + >; + }; + + /* WiFi_WKUP_WLAN# */ + pinctrl_wifi_wkup_wlan: main-gpio0-27-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x006c, PIN_INPUT, 7) /* (T22) GPMC0_AD12.GPIO0_27 */ + >; + }; + + /* Verdin SD_1_PWR_EN */ + pinctrl_sd1_pwr_en: main-gpio0-29-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0074, PIN_INPUT, 7) /* (U25) GPMC0_AD14.GPIO0_29 */ /* SODIMM 76 */ + >; + }; + + /* Verdin DSI_1_BKL_EN */ + pinctrl_dsi1_bkl_en: main-gpio0-30-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0078, PIN_INPUT, 7) /* (U24) GPMC0_AD15.GPIO0_30 */ /* SODIMM 21 */ + >; + }; + + /* Verdin CTRL_SLEEP_MOCI# */ + pinctrl_ctrl_sleep_moci: main-gpio0-31-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x007c, PIN_INPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */ /* SODIMM 256 */ + >; + }; + + /* Verdin CTRL_WAKE1_MICO# */ + pinctrl_ctrl_wake1_mico: main-gpio0-32-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */ /* SODIMM 252 */ + >; + }; + + /* Verdin I2S_2_D_OUT as GPIO (conflict with Verdin I2S_2 interface) */ + pinctrl_i2s_2_d_out_gpio: main-gpio0-34-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x008c, PIN_INPUT, 7) /* (L25) GPMC0_WEn.GPIO0_34 */ /* SODIMM 46 */ + >; + }; + + /* Verdin I2S_2_BCLK as GPIO (conflict with Verdin I2S_2 interface) */ + pinctrl_i2s_2_bclk_gpio: main-gpio0-35-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0090, PIN_INPUT, 7) /* (M24) GPMC0_BE0n_CLE.GPIO0_35 */ /* SODIMM 42 */ + >; + }; + + /* Verdin GPIO_6 */ + pinctrl_gpio_6: main-gpio0-36-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0094, PIN_INPUT, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */ /* SODIMM 218 */ + >; + }; + + /* Verdin ETH_2_RGMII_INT# */ + pinctrl_eth2_rgmii_int: main-gpio0-38-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x009c, PIN_INPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */ /* SODIMM 189 */ + >; + }; + + /* Verdin GPIO_5 */ + pinctrl_gpio_5: main-gpio0-40-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */ /* SODIMM 216 */ + >; + }; + + /* Verdin GPIO_7 */ + pinctrl_gpio_7: main-gpio0-41-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */ /* SODIMM 220 */ + >; + }; + + /* Verdin GPIO_8 */ + pinctrl_gpio_8: main-gpio0-42-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */ /* SODIMM 222 */ + >; + }; + + /* Verdin USB_1_OC# */ + pinctrl_usb1_oc: main-gpio0-71-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0124, PIN_INPUT, 7) /* (A23) MMC2_SDCD.GPIO0_71 */ /* SODIMM 157 */ + >; + }; + + /* Verdin USB_2_OC# */ + pinctrl_usb2_oc: main-gpio0-72-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0128, PIN_INPUT, 7) /* (B23) MMC2_SDWP.GPIO0_72 */ /* SODIMM 187 */ + >; + }; + + /* Verdin PWM_3_DSI as GPIO */ + pinctrl_pwm3_dsi_gpio: main-gpio1-17-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01bc, PIN_INPUT, 7) /* (A14) SPI0_CLK.GPIO1_17 */ /* SODIMM 19 */ + >; + }; + + /* Verdin QSPI_1_DQS as GPIO */ + pinctrl_qspi1_dqs_gpio: main-gpio1-18-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01c0, PIN_INPUT, 7) /* (B13) SPI0_D0.GPIO1_18 */ /* SODIMM 66 */ + >; + }; + + /* Verdin USB_1_ID */ + pinctrl_usb0_id: main-gpio1-19-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1.GPIO1_19 */ /* SODIMM 161 */ + >; + }; + + /* Verdin DSI_1_INT# (pulled-up as active-low) */ + pinctrl_dsi1_int: main-gpio1-49-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0244, PIN_INPUT_PULLUP, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ /* SODIMM 17 */ + >; + }; + + /* On-module I2C - PMIC_I2C */ + pinctrl_i2c0: main-i2c0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01e0, PIN_INPUT, 0) /* (B16) I2C0_SCL */ /* PMIC_I2C_SCL */ + AM62X_IOPAD(0x01e4, PIN_INPUT, 0) /* (A16) I2C0_SDA */ /* PMIC_I2C_SDA */ + >; + }; + + /* Verdin I2C_1 */ + pinctrl_i2c1: main-i2c1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ /* SODIMM 14 */ + AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ /* SODIMM 12 */ + >; + }; + + /* Verdin I2C_2_DSI */ + pinctrl_i2c2: main-i2c2-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x00b0, PIN_INPUT, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */ + AM62X_IOPAD(0x00b4, PIN_INPUT, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */ + >; + }; + + /* Verdin I2C_4_CSI */ + pinctrl_i2c3: main-i2c3-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01d0, PIN_INPUT, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */ + AM62X_IOPAD(0x01d4, PIN_INPUT, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */ + >; + }; + + /* I2S_1_MCLK */ + pinctrl_i2s1_mclk: main-system-audio-ext-reflock1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ /* SODIMM 38 */ + >; + }; + + /* Verdin I2S_1 */ + pinctrl_mcasp0: main-mcasp0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01a4, PIN_INPUT, 0) /* (B20) MCASP0_ACLKX */ /* SODIMM 30 */ + AM62X_IOPAD(0x01a8, PIN_INPUT, 0) /* (D20) MCASP0_AFSX */ /* SODIMM 32 */ + AM62X_IOPAD(0x01a0, PIN_OUTPUT, 0) /* (E18) MCASP0_AXR0 */ /* SODIMM 34 */ + AM62X_IOPAD(0x019c, PIN_INPUT, 0) /* (B18) MCASP0_AXR1 */ /* SODIMM 36 */ + >; + }; + + /* Verdin I2S_2 */ + pinctrl_mcasp1: main-mcasp1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */ /* SODIMM 42 */ + AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */ /* SODIMM 44 */ + AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */ /* SODIMM 46 */ + AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */ /* SODIMM 48 */ + >; + }; + + /* Verdin CAN_1 */ + pinctrl_mcan0: main-mcan0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */ /* SODIMM 22 */ + AM62X_IOPAD(0x01d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */ /* SODIMM 20 */ + >; + }; + + /* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */ + pinctrl_mdio: main-mdio1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */ /* ETH_1_MDC, SODIMM 193 */ + AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */ /* ETH_1_MDIO, SODIMM 191 */ + >; + }; + + /* On-module eMMC */ + pinctrl_sdhci0: main-mmc0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + + /* Verdin SD_1 */ + pinctrl_sdhci1: main-mmc1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ /* SODIMM 74 */ + AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ /* SODIMM 78 */ + AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */ /* SODIMM 80 */ + AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ /* SODIMM 82 */ + AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ /* SODIMM 70 */ + AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ /* SODIMM 72 */ + AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */ /* SODIMM 84 */ + >; + }; + + /* On-module Wi-Fi on WB SKUs, module-specific SDIO otherwise */ + pinctrl_sdhci2: main-mmc2-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x120, PIN_INPUT, 0) /* (C24) MMC2_CMD */ /* WiFi_SDIO_CMD */ + AM62X_IOPAD(0x118, PIN_INPUT, 0) /* (D25) MMC2_CLK */ /* WiFi_SDIO_CLK */ + AM62X_IOPAD(0x114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */ /* WiFi_SDIO_DATA0 */ + AM62X_IOPAD(0x110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */ /* WiFi_SDIO_DATA1 */ + AM62X_IOPAD(0x10c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */ /* WiFi_SDIO_DATA2 */ + AM62X_IOPAD(0x108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */ /* WiFi_SDIO_DATA3 */ + AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */ + >; + }; + + /* Verdin QSPI_1 */ + pinctrl_ospi0: main-ospi0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ /* SODIMM 52 */ + AM62X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ /* SODIMM 54 */ + AM62X_IOPAD(0x0030, PIN_OUTPUT, 0) /* (G21) OSPI0_CSn1 */ /* SODIMM 64 */ + AM62X_IOPAD(0x000c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */ /* SODIMM 56 */ + AM62X_IOPAD(0x0010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */ /* SODIMM 58 */ + AM62X_IOPAD(0x0014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */ /* SODIMM 60 */ + AM62X_IOPAD(0x0018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */ /* SODIMM 62 */ + >; + }; + + /* Verdin ETH_1 RGMII (On-module PHY) */ + pinctrl_rgmii1: main-rgmii1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ + AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ + AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */ + AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */ + AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */ + AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */ + AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */ + AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */ + AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */ + AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */ + AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */ + AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */ + >; + }; + + /* Verdin ETH_2 RGMII */ + pinctrl_rgmii2: main-rgmii2-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ /* SODIMM 201 */ + AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ /* SODIMM 203 */ + AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */ /* SODIMM 205 */ + AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */ /* SODIMM 207 */ + AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */ /* SODIMM 197 */ + AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */ /* SODIMM 199 */ + AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */ /* SODIMM 221 */ + AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */ /* SODIMM 219 */ + AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */ /* SODIMM 217 */ + AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */ /* SODIMM 215 */ + AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */ /* SODIMM 213 */ + AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */ /* SODIMM 211 */ + >; + }; + + /* Verdin SPI_1 */ + pinctrl_spi1: main-spi1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0020, PIN_INPUT, 1) /* (J25) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */ + AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */ + AM62X_IOPAD(0x0024, PIN_INPUT, 1) /* (H25) OSPI0_D6.SPI1_D0 */ /* SODIMM 200 */ + AM62X_IOPAD(0x0028, PIN_INPUT, 1) /* (J22) OSPI0_D7.SPI1_D1 */ /* SODIMM 198 */ + >; + }; + + /* ETH_25MHz_CLK */ + pinctrl_eth_clock: main-system-clkout0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01f0, PIN_OUTPUT_PULLUP, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */ + >; + }; + + /* PMIC_EXTINT# */ + pinctrl_pmic_extint: main-system-extint-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (D16) EXTINTn */ + >; + }; + + /* Verdin UART_3, used as the Linux console */ + pinctrl_uart0: main-uart0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1c8, PIN_INPUT_PULLUP, 0) /* (D14) UART0_RXD */ /* SODIMM 147 */ + AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ /* SODIMM 149 */ + >; + }; + + /* Verdin UART_1 */ + pinctrl_uart1: main-uart1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0194, PIN_INPUT_PULLUP, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */ /* SODIMM 135 */ + AM62X_IOPAD(0x0198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */ /* SODIMM 133 */ + AM62X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 2) /* (E19) MCASP0_AFSR.UART1_RXD */ /* SODIMM 129 */ + AM62X_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */ /* SODIMM 131 */ + >; + }; + + /* Bluetooth on WB SKUs, module-specific UART otherwise */ + pinctrl_uart5: main-uart5-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0008, PIN_INPUT_PULLUP, 5) /* (J24) OSPI0_DQS.UART5_CTSn */ /* WiFi_UART_CTS */ + AM62X_IOPAD(0x0004, PIN_OUTPUT, 5) /* (G25) OSPI0_LBCLKO.UART5_RTSn */ /* WiFi_UART_RTS */ + AM62X_IOPAD(0x0034, PIN_INPUT_PULLUP, 5) /* (H21) OSPI0_CSn2.UART5_RXD */ /* WiFi_UART_RXD */ + AM62X_IOPAD(0x0038, PIN_OUTPUT, 5) /* (E24) OSPI0_CSn3.UART5_TXD */ /* WiFi_UART_TXD */ + >; + }; + + /* Verdin USB_1 */ + pinctrl_usb0: main-usb0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0254, PIN_OUTPUT, 0) /* (C20) USB0_DRVVBUS */ /* SODIMM 155 */ + >; + }; + + /* Verdin USB_2 */ + pinctrl_usb1: main-usb1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ /* SODIMM 185 */ + >; + }; + + /* DSS VOUT0 RGB */ + pinctrl_parallel_rgb: main-vout-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */ + AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */ + AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */ + AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */ + AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */ + AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */ + AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */ + AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */ + AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */ + AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */ + AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */ + AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */ + AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */ + AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */ + AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */ + AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */ + AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */ + AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */ + AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */ + AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */ + AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */ + AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */ + >; + }; +}; + +&mcu_pmx0 { + /* Verdin PCIE_1_RESET# */ + pinctrl_pcie_1_reset: mcu-gpio0-0-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0000, PIN_INPUT, 7) /* (E8) MCU_SPI0_CS0.MCU_GPIO0_0 */ /* SODIMM 244 */ + >; + }; + + /* Verdin GPIO_1 */ + pinctrl_gpio_1: mcu-gpio0-1-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0004, PIN_INPUT, 7) /* (B8) MCU_SPI0_CS1.MCU_GPIO0_1 */ /* SODIMM 206 */ + >; + }; + + /* Verdin GPIO_2 */ + pinctrl_gpio_2: mcu-gpio0-2-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0008, PIN_INPUT, 7) /* (A7) MCU_SPI0_CLK.MCU_GPIO0_2 */ /* SODIMM 208 */ + >; + }; + + /* Verdin GPIO_3 */ + pinctrl_gpio_3: mcu-gpio0-3-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x000c, PIN_INPUT, 7) /* (D9) MCU_SPI0_D0.MCU_GPIO0_3 */ /* SODIMM 210 */ + >; + }; + + /* Verdin GPIO_4 */ + pinctrl_gpio_4: mcu-gpio0-4-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0010, PIN_INPUT, 7) /* (C9) MCU_SPI0_D1.MCU_GPIO0_4 */ /* SODIMM 212 */ + >; + }; + + /* Verdin I2C_3_HDMI */ + pinctrl_mcu_i2c0: mcu-i2c0-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */ /* SODIMM 59 */ + AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */ + >; + }; + + /* Verdin UART_4 - Reserved to Cortex-M4 */ + pinctrl_mcu_uart0: mcu-uart0-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0014, PIN_INPUT_PULLUP, 0) /* (B5) MCU_UART0_RXD */ /* SODIMM 151 */ + AM62X_MCU_IOPAD(0x0018, PIN_OUTPUT, 0) /* (A5) MCU_UART0_TXD */ /* SODIMM 153 */ + >; + }; + + /* Verdin CSI_1_MCLK */ + pinctrl_csi1_mclk: wkup-clkout0-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */ /* SODIMM 91 */ + >; + }; + + /* Verdin UART_2 */ + pinctrl_wkup_uart0: wkup-uart0-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x002c, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_UART0_CTSn */ /* SODIMM 143 */ + AM62X_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (A4) WKUP_UART0_RTSn */ /* SODIMM 141 */ + AM62X_MCU_IOPAD(0x0024, PIN_INPUT_PULLUP, 0) /* (B4) WKUP_UART0_RXD */ /* SODIMM 137 */ + AM62X_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (C5) WKUP_UART0_TXD */ /* SODIMM 139 */ + >; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1>; + status = "disabled"; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&cpsw_port1 { + phy-handle = <&cpsw3g_phy0>; + phy-mode = "rgmii-rxid"; + status = "disabled"; +}; + +/* Verdin ETH_2_RGMII */ +&cpsw_port2 { + status = "disabled"; +}; + +/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */ +&cpsw3g_mdio { + assigned-clocks = <&k3_clks 157 20>; + assigned-clock-parents = <&k3_clks 157 22>; + assigned-clock-rates = <25000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth_clock>, <&pinctrl_mdio>; + status = "disabled"; + + cpsw3g_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.a231"; + reg = <0>; + interrupt-parent = <&main_gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth_int>, <&pinctrl_eth_reset>; + reset-gpios = <&main_gpio0 17 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <1000>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + }; +}; + +/* Verdin PWM_1, PWM_2 */ +&epwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epwm0_a>, <&pinctrl_epwm0_b>; + status = "disabled"; +}; + +/* Verdin PWM_3_DSI */ +&epwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epwm1_a>; + status = "disabled"; +}; + +&main_gpio0 { + gpio-line-names = + "SODIMM_52", /* 0 */ + "", + "", + "SODIMM_56", + "SODIMM_58", + "SODIMM_60", + "SODIMM_62", + "", + "", + "", + "", /* 10 */ + "SODIMM_54", + "SODIMM_64", + "", + "", + "SODIMM_174", + "SODIMM_172", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_76", + "SODIMM_21", /* 30 */ + "SODIMM_256", + "SODIMM_252", + "", + "SODIMM_46", + "SODIMM_42", + "SODIMM_218", + "", + "SODIMM_189", + "", + "SODIMM_216", /* 40 */ + "SODIMM_220", + "SODIMM_222", + "", + "", + "", + "", + "", + "", + "", + "", /* 50 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 60 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 70 */ + "SODIMM_157", + "SODIMM_187", + "", + "", + "", + "", + "", + "", + "", + "", /* 80 */ + "", + "", + "", + "", + "", + ""; + + verdin_ctrl_sleep_moci: ctrl-sleep-moci-hog { + gpio-hog; + /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ + gpios = <31 GPIO_ACTIVE_HIGH>; + line-name = "CTRL_SLEEP_MOCI#"; + output-high; + }; +}; + +&main_gpio1 { + gpio-line-names = + "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "SODIMM_15", + "SODIMM_16", + "SODIMM_19", + "SODIMM_66", + "SODIMM_161", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 30 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 40 */ + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_17", + "", /* 50 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 60 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 70 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 80 */ + "", + "", + "", + "", + "", + "", + ""; +}; + +/* On-module I2C - PMIC_I2C */ +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clock-frequency = <400000>; + status = "okay"; + + dsi_bridge: dsi@e { + compatible = "toshiba,tc358778"; + reg = <0xe>; + assigned-clocks = <&k3_clks 157 20>; + assigned-clock-parents = <&k3_clks 157 22>; + assigned-clock-rates = <25000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bridge_reset>; + clocks = <&k3_clks 157 20>; + clock-names = "refclk"; + reset-gpios = <&main_gpio0 20 GPIO_ACTIVE_LOW>; + vddc-supply = <®_1v2_dsi>; + vddmipi-supply = <®_1v2_dsi>; + vddio-supply = <®_1v8_dsi>; + + dsi_bridge_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + rgb_in: endpoint { + data-lines = <18>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic_extint>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + + buck1-supply = <®_vsodimm>; + buck2-supply = <®_vsodimm>; + buck3-supply = <®_vsodimm>; + ldo1-supply = <®_3v3>; + ldo2-supply = <®_1v8>; + ldo3-supply = <®_3v3>; + ldo4-supply = <®_3v3>; + system-power-controller; + ti,power-button; + + regulators { + reg_vdd_core: buck1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <850000>; + regulator-name = "+VDD_CORE (PMIC BUCK1)"; + }; + + reg_1v8: buck2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8 (PMIC BUCK2)"; /* On-module and SODIMM 214 */ + }; + + reg_vdd_ddr: buck3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "+VDD_DDR (PMIC BUCK3)"; + }; + + reg_sd_3v3_1v8: ldo1 { + regulator-allow-bypass; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_1.8_SD (PMIC LDO1)"; + }; + + reg_vddr_core: ldo2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <850000>; + regulator-name = "+VDDR_CORE (PMIC LDO2)"; + }; + + reg_1v8a: ldo3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8A (PMIC LDO3)"; + }; + + reg_eth_2v5: ldo4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <2500000>; + regulator-name = "+V2.5_ETH (PMIC LDO4)"; + }; + }; + }; + + rtc_i2c: rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + }; + + sensor@48 { + compatible = "ti,tmp1075"; + reg = <0x48>; + }; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* Verdin PMIC_I2C (ADC_4 - ADC_3) */ + channel@0 { + reg = <0>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C (ADC_4 - ADC_1) */ + channel@1 { + reg = <1>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C (ADC_3 - ADC_1) */ + channel@2 { + reg = <2>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C (ADC_2 - ADC_1) */ + channel@3 { + reg = <3>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C ADC_4 */ + channel@4 { + reg = <4>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C ADC_3 */ + channel@5 { + reg = <5>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C ADC_2 */ + channel@6 { + reg = <6>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin PMIC_I2C ADC_1 */ + channel@7 { + reg = <7>; + ti,datarate = <4>; + ti,gain = <2>; + }; + }; + + eeprom@50 { + compatible = "st,24c02", "atmel,24c02"; + pagesize = <16>; + reg = <0x50>; + }; +}; + +/* Verdin I2C_1 */ +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "disabled"; +}; + +/* Verdin I2C_2_DSI */ +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "disabled"; +}; + +/* Verdin I2C_4_CSI */ +&main_i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; +}; + +&mailbox0_cluster0 { + mbox_m4_0: mbox-m4-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +/* Verdin CAN_1 */ +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcan0>; + status = "disabled"; +}; + +/* Verdin CAN_2 - Reserved to Cortex-M4 */ + +/* Verdin SPI_1 */ +&main_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + ti,pindir-d0-out-d1-in; + status = "disabled"; +}; + +/* Verdin UART_3, used as the Linux console */ +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; +}; + +/* Verdin UART_1 */ +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; +}; + +/* Verdin I2S_1 */ +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcasp0>; + op-mode = <0>; /* I2S mode */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tdm-slots = <2>; + rx-num-evt = <32>; + tx-num-evt = <32>; + #sound-dai-cells = <0>; + status = "disabled"; +}; + +/* Verdin I2S_2 */ +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcasp1>; + op-mode = <0>; /* I2S mode */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tdm-slots = <2>; + rx-num-evt = <32>; + tx-num-evt = <32>; + #sound-dai-cells = <0>; + status = "disabled"; +}; + +/* Verdin I2C_3_HDMI */ +&mcu_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_i2c0>; + status = "disabled"; +}; + +&mcu_gpio0 { + gpio-line-names = + "SODIMM_244", + "SODIMM_206", + "SODIMM_208", + "SODIMM_210", + "SODIMM_212", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + +/* Verdin UART_4 - Cortex-M4 UART */ +&mcu_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_uart0>; + status = "disabled"; +}; + +/* Verdin QSPI_1 */ +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ospi0>; + status = "disabled"; +}; + +/* On-module eMMC */ +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0>; + non-removable; + ti,driver-strength-ohm = <50>; + status = "okay"; +}; + +/* Verdin SD_1 */ +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1>; + disable-wp; + ti,driver-strength-ohm = <50>; + vmmc-supply = <®_sdhc1_vmmc>; + vqmmc-supply = <®_sdhc1_vqmmc>; + status = "disabled"; +}; + +/* Verdin USB_1 */ +&usbss0 { + ti,vbus-divider; + status = "disabled"; +}; + +/* TODO: role swich using ID pin */ +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb0_id>; + status = "disabled"; +}; + +/* Verdin USB_2 */ +&usbss1 { + ti,vbus-divider; + status = "disabled"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + dr_mode = "host"; + status = "disabled"; +}; + +/* Verdin UART_2 */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wkup_uart0>; + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi index 7726ebae2539..eae052887186 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi @@ -61,4 +61,12 @@ /* Used by DM firmware */ status = "reserved"; }; + + wkup_vtm0: temperature-sensor@b00000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0xb00000 0x00 0x400>, + <0x00 0xb01000 0x00 0x400>; + power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi index a401f5225243..5e72c445f37a 100644 --- a/arch/arm64/boot/dts/ti/k3-am62.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi @@ -81,6 +81,7 @@ <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Wakeup Domain Range */ + <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>; @@ -91,14 +92,17 @@ ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */ }; - cbass_wakeup: bus@2b000000 { + cbass_wakeup: bus@b00000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; - ranges = <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */ + ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ + <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */ <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>; }; }; + + #include "k3-am62-thermal.dtsi" }; /* Now include the peripherals for each bus segments */ diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index cb46c38ce2cc..589bf998bc52 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -216,7 +216,7 @@ }; &main_pmx0 { - gpio0_pins_default: gpio0-pins-default { + gpio0_pins_default: gpio0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */ AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */ @@ -235,47 +235,47 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-pins-default { + vdd_sd_dv_pins_default: vdd-sd-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ >; }; - usr_button_pins_default: usr-button-pins-default { + usr_button_pins_default: usr-button-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */ >; }; - grove_pins_default: grove-pins-default { + grove_pins_default: grove-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ >; }; - local_i2c_pins_default: local-i2c-pins-default { + local_i2c_pins_default: local-i2c-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ >; }; - i2c2_1v8_pins_default: i2c2-pins-default { + i2c2_1v8_pins_default: i2c2-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ >; }; - mdio0_pins_default: mdio0-pins-default { + mdio0_pins_default: mdio0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */ AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */ >; }; - rgmii1_pins_default: rgmii1-pins-default { + rgmii1_pins_default: rgmii1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ @@ -292,7 +292,7 @@ >; }; - emmc_pins_default: emmc-pins-default { + emmc_pins_default: emmc-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ @@ -307,13 +307,13 @@ >; }; - vdd_3v3_sd_pins_default: vdd-3v3-sd-pins-default { + vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */ >; }; - sd_pins_default: sd-pins-default { + sd_pins_default: sd-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ @@ -325,7 +325,7 @@ >; }; - wifi_pins_default: wifi-pins-default { + wifi_pins_default: wifi-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */ AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */ @@ -338,19 +338,19 @@ >; }; - wifi_en_pins_default: wifi-en-pins-default { + wifi_en_pins_default: wifi-en-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */ >; }; - wifi_wlirq_pins_default: wifi-wlirq-pins-default { + wifi_wlirq_pins_default: wifi-wlirq-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */ >; }; - spe_pins_default: spe-pins-default { + spe_pins_default: spe-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */ AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */ @@ -366,21 +366,21 @@ >; }; - mikrobus_i2c_pins_default: mikrobus-i2c-pins-default { + mikrobus_i2c_pins_default: mikrobus-i2c-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */ AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */ >; }; - mikrobus_uart_pins_default: mikrobus-uart-pins-default { + mikrobus_uart_pins_default: mikrobus-uart-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01d8, PIN_INPUT, 1) /* (C15) MCAN0_TX.UART5_RXD */ AM62X_IOPAD(0x01dc, PIN_OUTPUT, 1) /* (E15) MCAN0_RX.UART5_TXD */ >; }; - mikrobus_spi_pins_default: mikrobus-spi-pins-default { + mikrobus_spi_pins_default: mikrobus-spi-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01b0, PIN_INPUT, 1) /* (A20) MCASP0_ACLKR.SPI2_CLK */ AM62X_IOPAD(0x01ac, PIN_INPUT, 1) /* (E19) MCASP0_AFSR.SPI2_CS0 */ @@ -389,7 +389,7 @@ >; }; - mikrobus_gpio_pins_default: mikrobus-gpio-pins-default { + mikrobus_gpio_pins_default: mikrobus-gpio-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */ AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */ @@ -397,27 +397,27 @@ >; }; - console_pins_default: console-pins-default { + console_pins_default: console-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ >; }; - wifi_debug_uart_pins_default: wifi-debug-uart-pins-default { + wifi_debug_uart_pins_default: wifi-debug-uart-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */ AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */ >; }; - usb1_pins_default: usb1-pins-default { + usb1_pins_default: usb1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */ >; }; - pmic_irq_pins_default: pmic-irq-pins-default { + pmic_irq_pins_default: pmic-irq-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */ >; @@ -425,7 +425,7 @@ }; &mcu_pmx0 { - i2c_qwiic_pins_default: i2c-qwiic-pins-default { + i2c_qwiic_pins_default: i2c-qwiic-default-pins { pinctrl-single,pins = < AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */ AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ @@ -438,14 +438,14 @@ >; }; - i2c_csi_pins_default: i2c-csi-pins-default { + i2c_csi_pins_default: i2c-csi-default-pins { pinctrl-single,pins = < AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */ AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */ >; }; - wifi_32k_clk: mcu-clk-out-pins-default { + wifi_32k_clk: mcu-clk-out-default-pins { pinctrl-single,pins = < AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */ >; diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts new file mode 100644 index 000000000000..a438baf542c2 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * Product homepage: + * https://www.phytec.com/product/phyboard-am62x + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-am625.dtsi" +#include "k3-am62-phycore-som.dtsi" + +/ { + compatible = "phytec,am625-phyboard-lyra-rdk", + "phytec,am62-phycore-som", "ti,am625"; + model = "PHYTEC phyBOARD-Lyra AM625"; + + aliases { + serial2 = &main_uart0; + serial3 = &main_uart1; + mmc1 = &sdhci1; + usb0 = &usb0; + usb1 = &usb1; + ethernet1 = &cpsw_port2; + }; + + can_tc1: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; + }; + + keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins_default>; + + key-home { + label = "home"; + linux,code = <KEY_HOME>; + gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + key-menu { + label = "menu"; + linux,code = <KEY_MENU>; + gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>; + + led-1 { + gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + + led-2 { + gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + }; + }; + + vcc_3v3_mmc: regulator-vcc-3v3-mmc { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_MMC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&main_pmx0 { + gpio_keys_pins_default: gpio-keys-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ + >; + }; + + gpio_exp_int_pins_default: gpio-exp-int-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ + >; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ + AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ + >; + }; + + main_mcan0_pins_default: main-mcan0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */ + AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */ + >; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */ + AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */ + AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */ + AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */ + AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */ + AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */ + AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */ + >; + }; + + main_rgmii2_pins_default: main-rgmii2-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ + AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ + AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */ + AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */ + AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */ + AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */ + AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */ + AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */ + AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */ + AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */ + AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */ + AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */ + >; + }; + + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ + AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ + >; + }; + + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */ + AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */ + AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */ + AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */ + >; + }; + + main_usb1_pins_default: main-usb1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ + >; + }; + + user_leds_pins_default: user-leds-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */ + >; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>; +}; + +&cpsw_port2 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy3>; +}; + +&cpsw3g_mdio { + cpsw3g_phy3: ethernet-phy@3 { + compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + gpio_exp: gpio-expander@21 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio_exp_int_pins_default>; + compatible = "nxp,pcf8574"; + reg = <0x21>; + interrupt-parent = <&main_gpio1>; + interrupts = <49 0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN", + "GPIO2_LED2", "GPIO3_LVDS_GPIO", + "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN", + "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET"; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x51>; + }; +}; + +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&can_tc1>; + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + status = "okay"; +}; + +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + /* Main UART1 may be used by TIFS firmware */ + status = "okay"; +}; + +&sdhci1 { + vmmc-supply = <&vcc_3v3_mmc>; + vqmmc-supply = <&vddshv5_sdio>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; + no-1-8-v; + status = "okay"; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usbss1 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&main_usb1_pins_default>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 2a1adda9bff6..3f9ef4053aa6 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -101,7 +101,7 @@ }; &main_pmx0 { - main_rgmii2_pins_default: main-rgmii2-pins-default { + main_rgmii2_pins_default: main-rgmii2-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ @@ -118,7 +118,7 @@ >; }; - ospi0_pins_default: ospi0-pins-default { + ospi0_pins_default: ospi0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ @@ -134,13 +134,13 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */ >; }; - main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-pins-default { + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ >; @@ -161,7 +161,7 @@ "UART1_FET_BUF_EN", "WL_LT_EN", "GPIO_HDMI_RSTn", "CSI_GPIO1", "CSI_GPIO2", "PRU_3V3_EN", - "HDMI_INTn", "TEST_GPIO2", + "HDMI_INTn", "PD_I2C_IRQ", "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", "MCASP1_FET_SEL", "UART1_FET_SEL", "TSINT#", "IO_EXP_TEST_LED"; @@ -183,8 +183,7 @@ &cpsw3g { pinctrl-names = "default"; - pinctrl-0 = <&main_rgmii1_pins_default - &main_rgmii2_pins_default>; + pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>; }; &cpsw_port2 { diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts new file mode 100644 index 000000000000..d38bfef29d71 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-nonwifi.dtsi" +#include "k3-am62-verdin-dahlia.dtsi" + +/ { + model = "Toradex Verdin AM62 on Dahlia Board"; + compatible = "toradex,verdin-am62-nonwifi-dahlia", + "toradex,verdin-am62-nonwifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts new file mode 100644 index 000000000000..31d2a3066d43 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/verdin-development-board-kit + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-nonwifi.dtsi" +#include "k3-am62-verdin-dev.dtsi" + +/ { + model = "Toradex Verdin AM62 on Verdin Development Board"; + compatible = "toradex,verdin-am62-nonwifi-dev", + "toradex,verdin-am62-nonwifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts new file mode 100644 index 000000000000..e80332e1f030 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/yavia + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-nonwifi.dtsi" +#include "k3-am62-verdin-yavia.dtsi" + +/ { + model = "Toradex Verdin AM62 on Yavia Board"; + compatible = "toradex,verdin-am62-nonwifi-yavia", + "toradex,verdin-am62-nonwifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts new file mode 100644 index 000000000000..3850a706edb7 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-wifi.dtsi" +#include "k3-am62-verdin-dahlia.dtsi" + +/ { + model = "Toradex Verdin AM62 WB on Dahlia Board"; + compatible = "toradex,verdin-am62-wifi-dahlia", + "toradex,verdin-am62-wifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts new file mode 100644 index 000000000000..4b657d6d3e0d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/verdin-development-board-kit + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-wifi.dtsi" +#include "k3-am62-verdin-dev.dtsi" + +/ { + model = "Toradex Verdin AM62 WB on Verdin Development Board"; + compatible = "toradex,verdin-am62-wifi-dev", + "toradex,verdin-am62-wifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts new file mode 100644 index 000000000000..8a2506068ac4 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/yavia + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-wifi.dtsi" +#include "k3-am62-verdin-yavia.dtsi" + +/ { + model = "Toradex Verdin AM62 WB on Yavia Board"; + compatible = "toradex,verdin-am62-wifi-yavia", + "toradex,verdin-am62-wifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index 393a1a40b68b..8b315cc61550 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -169,6 +169,21 @@ }; }; + secure_proxy_sa3: mailbox@43600000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x43600000 0x00 0x10000>, + <0x00 0x44880000 0x00 0x20000>, + <0x00 0x44860000 0x00 0x20000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + main_pmx0: pinctrl@f4000 { compatible = "pinctrl-single"; reg = <0x00 0xf4000 0x00 0x2ac>; @@ -177,6 +192,102 @@ pinctrl-single,function-mask = <0xffffffff>; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 36 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 36 2>; + assigned-clock-parents = <&k3_clks 36 3>; + power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 37 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 37 2>; + assigned-clock-parents = <&k3_clks 37 3>; + power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 38 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 38 2>; + assigned-clock-parents = <&k3_clks 38 3>; + power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 39 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 39 2>; + assigned-clock-parents = <&k3_clks 39 3>; + power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 40 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 40 2>; + assigned-clock-parents = <&k3_clks 40 3>; + power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 41 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 41 2>; + assigned-clock-parents = <&k3_clks 41 3>; + power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 42 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 42 2>; + assigned-clock-parents = <&k3_clks 42 3>; + power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 43 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 43 2>; + assigned-clock-parents = <&k3_clks 43 3>; + power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + main_uart0: serial@2800000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; @@ -601,6 +712,51 @@ status = "disabled"; }; + main_rti0: watchdog@e000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e000000 0x00 0x100>; + clocks = <&k3_clks 125 0>; + power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 125 0>; + assigned-clock-parents = <&k3_clks 125 2>; + }; + + main_rti1: watchdog@e010000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e010000 0x00 0x100>; + clocks = <&k3_clks 126 0>; + power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 126 0>; + assigned-clock-parents = <&k3_clks 126 2>; + }; + + main_rti2: watchdog@e020000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e020000 0x00 0x100>; + clocks = <&k3_clks 127 0>; + power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 127 0>; + assigned-clock-parents = <&k3_clks 127 2>; + }; + + main_rti3: watchdog@e030000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e030000 0x00 0x100>; + clocks = <&k3_clks 128 0>; + power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 128 0>; + assigned-clock-parents = <&k3_clks 128 2>; + }; + + main_rti4: watchdog@e040000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e040000 0x00 0x100>; + clocks = <&k3_clks 205 0>; + power-domains = <&k3_pds 205 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 205 0>; + assigned-clock-parents = <&k3_clks 205 2>; + }; + epwm0: pwm@23000000 { compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi index 2bb813e784a2..04599762c2b7 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi @@ -15,6 +15,51 @@ status = "disabled"; }; + /* + * The MCU domain timer interrupts are routed only to the ESM module, + * and not currently available for Linux. The MCU domain timers are + * of limited use without interrupts, and likely reserved by the ESM. + */ + mcu_timer0: timer@4800000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4800000 0x00 0x400>; + clocks = <&k3_clks 35 2>; + clock-names = "fck"; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer1: timer@4810000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4810000 0x00 0x400>; + clocks = <&k3_clks 48 2>; + clock-names = "fck"; + power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer2: timer@4820000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4820000 0x00 0x400>; + clocks = <&k3_clks 49 2>; + clock-names = "fck"; + power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer3: timer@4830000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4830000 0x00 0x400>; + clocks = <&k3_clks 50 2>; + clock-names = "fck"; + power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + mcu_uart0: serial@4a00000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a00000 0x00 0x100>; @@ -87,4 +132,15 @@ clock-names = "gpio"; status = "disabled"; }; + + mcu_rti0: watchdog@4880000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x04880000 0x00 0x100>; + clocks = <&k3_clks 131 0>; + power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 131 0>; + assigned-clock-parents = <&k3_clks 131 2>; + /* Tightly coupled to M4F */ + status = "reserved"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi new file mode 100644 index 000000000000..85ce545633ea --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +thermal_zones: thermal-zones { + main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + main0_crit: main0-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + main1_crit: main1-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main2_thermal: main2-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + main2_crit: main2-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi index 81d984414fd4..4e8279fa01e1 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi @@ -51,4 +51,23 @@ wakeup-source; status = "disabled"; }; + + wkup_rti0: watchdog@2b000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2b000000 0x00 0x100>; + clocks = <&k3_clks 132 0>; + power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 132 0>; + assigned-clock-parents = <&k3_clks 132 2>; + /* Used by DM firmware */ + status = "reserved"; + }; + + wkup_vtm0: temperature-sensor@b00000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0xb00000 0x00 0x400>, + <0x00 0xb01000 0x00 0x400>; + power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi index fe60c9ce21e3..61a210ecd5ff 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi @@ -115,6 +115,8 @@ <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/ }; }; + + #include "k3-am62a-thermal.dtsi" }; /* Now include the peripherals for each bus segments */ diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index f6a67f072dca..ecc0e13331c4 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -17,7 +17,9 @@ model = "Texas Instruments AM62A7 SK"; aliases { + serial0 = &wkup_uart0; serial2 = &main_uart0; + serial3 = &main_uart1; mmc1 = &sdhci1; }; @@ -114,36 +116,63 @@ }; }; +&mcu_pmx0 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */ + AM62AX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */ + AM62AX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */ + AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */ + >; + }; +}; + +/* WKUP UART0 is used for DM firmware logs */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + status = "reserved"; +}; + &main_pmx0 { - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < - AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ - AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ + AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */ + AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */ + AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */ + AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */ + AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ >; }; - main_i2c2_pins_default: main-i2c2-pins-default { + main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ AM62AX_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ @@ -155,26 +184,26 @@ >; }; - usr_led_pins_default: usr-led-pins-default { + usr_led_pins_default: usr-led-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */ >; }; - main_usb1_pins_default: main-usb1-pins-default { + main_usb1_pins_default: main-usb1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ >; }; - main_mdio1_pins_default: main-mdio1-pins-default { + main_mdio1_pins_default: main-mdio1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ >; }; - main_rgmii1_pins_default: main-rgmii1-pins-default { + main_rgmii1_pins_default: main-rgmii1-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */ AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */ @@ -254,6 +283,13 @@ pinctrl-0 = <&main_uart0_pins_default>; }; +/* Main UART1 is used for TIFS firmware logs */ +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + status = "reserved"; +}; + &usbss1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 976f8303c84f..540ed8a0d7fb 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -25,14 +25,12 @@ chosen { stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; }; memory@80000000 { device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; reserved-memory { @@ -120,35 +118,44 @@ &main_pmx0 { /* First pad number is ALW package and second is AMC package */ - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */ AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */ + AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */ + AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19/D15) MCASP0_AFSR.UART1_RXD */ + AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20/D16) MCASP0_ACLKR.UART1_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16/E12) I2C0_SCL */ AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16/D14) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */ AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */ >; }; - main_i2c2_pins_default: main-i2c2-pins-default { + main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22/H18) GPMC0_CSn2.I2C2_SCL */ AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */ >; }; - main_mmc0_pins_default: main-mmc0-pins-default { + main_mmc0_pins_default: main-mmc0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */ AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */ @@ -163,7 +170,7 @@ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */ AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */ @@ -175,20 +182,20 @@ >; }; - usr_led_pins_default: usr-led-pins-default { + usr_led_pins_default: usr-led-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17/B15) MMC1_SDWP.GPIO1_49 */ >; }; - main_mdio1_pins_default: main-mdio1-pins-default { + main_mdio1_pins_default: main-mdio1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24/V17) MDIO0_MDC */ AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22/U16) MDIO0_MDIO */ >; }; - main_rgmii1_pins_default: main-rgmii1-pins-default { + main_rgmii1_pins_default: main-rgmii1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */ AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */ @@ -205,18 +212,29 @@ >; }; - main_usb1_pins_default: main-usb1-pins-default { + main_usb1_pins_default: main-usb1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */ >; }; - main_mcasp1_pins_default: main-mcasp1-pins-default { + main_mcasp1_pins_default: main-mcasp1-default-pins { pinctrl-single,pins = < - AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24) GPMC0_BE0N_CLE.MCASP1_ACLKX */ - AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */ - AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEN.MCASP1_AXR0 */ - AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23) GPMC0_ADVN_ALE.MCASP1_AXR2 */ + AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24/K17) GPMC0_BE0N_CLE.MCASP1_ACLKX */ + AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23/P21) GPMC0_WAIT0.MCASP1_AFSX */ + AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25/J17) GPMC0_WEN.MCASP1_AXR0 */ + AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23/K20) GPMC0_ADVN_ALE.MCASP1_AXR2 */ + >; + }; +}; + +&mcu_pmx0 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */ + AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */ + AM62X_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (B4/B5) WKUP_UART0_RXD */ + AM62X_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (C5/C6) WKUP_UART0_TXD */ >; }; }; @@ -224,6 +242,8 @@ &wkup_uart0 { /* WKUP UART0 is used by DM firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; &main_uart0 { @@ -235,6 +255,8 @@ &main_uart1 { /* Main UART1 is used by TIFS firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; }; &main_i2c0 { @@ -242,13 +264,43 @@ pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; + + eeprom@51 { + /* AT24C512C-MAHM-T or M24512-DFMC6TG */ + compatible = "atmel,24c512"; + reg = <0x51>; + }; + + typec_pd0: tps6598x@3f { + compatible = "ti,tps6598x"; + reg = <0x3f>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + self-powered; + data-role = "dual"; + power-role = "sink"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_hs: endpoint { + remote-endpoint = <&usb0_hs_ep>; + }; + }; + }; + }; + }; }; &main_i2c1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <400000>; + clock-frequency = <100000>; tlv320aic3106: audio-codec@1b { #sound-dai-cells = <0>; @@ -321,7 +373,16 @@ }; &usb0 { - dr_mode = "peripheral"; + #address-cells = <1>; + #size-cells = <0>; + usb-role-switch; + + port@0 { + reg = <0>; + usb0_hs_ep: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; }; &usb1 { diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 5e8036f32d79..1664d9f0241c 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -228,12 +228,161 @@ }; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 36 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 36 1>; + assigned-clock-parents = <&k3_clks 36 2>; + power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 37 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 37 1>; + assigned-clock-parents = <&k3_clks 37 2>; + power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 38 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 38 1>; + assigned-clock-parents = <&k3_clks 38 2>; + power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 39 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 39 1>; + assigned-clock-parents = <&k3_clks 39 2>; + power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 40 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 40 1>; + assigned-clock-parents = <&k3_clks 40 2>; + power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 41 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 41 1>; + assigned-clock-parents = <&k3_clks 41 2>; + power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 42 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 42 1>; + assigned-clock-parents = <&k3_clks 42 2>; + power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 43 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 43 1>; + assigned-clock-parents = <&k3_clks 43 2>; + power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer8: timer@2480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2480000 0x00 0x400>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 44 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 44 1>; + assigned-clock-parents = <&k3_clks 44 2>; + power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer9: timer@2490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2490000 0x00 0x400>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 45 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 45 1>; + assigned-clock-parents = <&k3_clks 45 2>; + power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer10: timer@24a0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24a0000 0x00 0x400>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 46 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 46 1>; + assigned-clock-parents = <&k3_clks 46 2>; + power-domains = <&k3_pds 46 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer11: timer@24b0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24b0000 0x00 0x400>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 47 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 47 1>; + assigned-clock-parents = <&k3_clks 47 2>; + power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_esm: esm@420000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x420000 0x00 0x1000>; + ti,esm-pins = <160>, <161>; + }; + main_uart0: serial@2800000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 146 0>; clock-names = "fclk"; @@ -245,7 +394,6 @@ reg = <0x00 0x02810000 0x00 0x100>; interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 152 0>; clock-names = "fclk"; @@ -257,7 +405,6 @@ reg = <0x00 0x02820000 0x00 0x100>; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 153 0>; clock-names = "fclk"; @@ -269,7 +416,6 @@ reg = <0x00 0x02830000 0x00 0x100>; interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 154 0>; clock-names = "fclk"; @@ -281,7 +427,6 @@ reg = <0x00 0x02840000 0x00 0x100>; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 155 0>; clock-names = "fclk"; @@ -293,7 +438,6 @@ reg = <0x00 0x02850000 0x00 0x100>; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 156 0>; clock-names = "fclk"; @@ -305,7 +449,6 @@ reg = <0x00 0x02860000 0x00 0x100>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 158 0>; clock-names = "fclk"; @@ -676,6 +819,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster3: mailbox@29030000 { @@ -686,6 +830,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster4: mailbox@29040000 { @@ -696,6 +841,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster5: mailbox@29050000 { @@ -706,6 +852,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster6: mailbox@29060000 { @@ -715,6 +862,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster7: mailbox@29070000 { @@ -724,6 +872,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; main_r5fss0: r5fss@78000000 { @@ -1392,4 +1541,12 @@ clock-names = "fck"; status = "disabled"; }; + + main_vtm0: temperature-sensor@b00000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0xb00000 0x00 0x400>, + <0x00 0xb01000 0x00 0x400>; + power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi index 38ddf0b3b8a0..686d49790721 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi @@ -6,11 +6,55 @@ */ &cbass_mcu { + /* + * The MCU domain timer interrupts are routed only to the ESM module, + * and not currently available for Linux. The MCU domain timers are + * of limited use without interrupts, and likely reserved by the ESM. + */ + mcu_timer0: timer@4800000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4800000 0x00 0x400>; + clocks = <&k3_clks 35 1>; + clock-names = "fck"; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer1: timer@4810000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4810000 0x00 0x400>; + clocks = <&k3_clks 48 1>; + clock-names = "fck"; + power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer2: timer@4820000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4820000 0x00 0x400>; + clocks = <&k3_clks 49 1>; + clock-names = "fck"; + power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer3: timer@4830000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4830000 0x00 0x400>; + clocks = <&k3_clks 50 1>; + clock-names = "fck"; + power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + mcu_uart0: serial@4a00000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a00000 0x00 0x100>; interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; - current-speed = <115200>; power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 149 0>; clock-names = "fclk"; @@ -21,7 +65,6 @@ compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a10000 0x00 0x100>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - current-speed = <115200>; power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 160 0>; clock-names = "fclk"; @@ -109,4 +152,10 @@ pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; }; + + mcu_esm: esm@4100000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x4100000 0x00 0x1000>; + ti,esm-pins = <0>, <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi index 8dfb6301b17d..5606d775153d 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi @@ -66,7 +66,7 @@ }; &main_pmx0 { - cpsw_mdio_pins_default: cpsw-mdio-pins-default { + cpsw_mdio_pins_default: cpsw-mdio-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ @@ -74,7 +74,7 @@ >; }; - cpsw_rgmii1_pins_default: cpsw-rgmii1-pins-default { + cpsw_rgmii1_pins_default: cpsw-rgmii1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */ AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */ @@ -92,26 +92,26 @@ >; }; - eeprom_wp_pins_default: eeprom-wp-pins-default { + eeprom_wp_pins_default: eeprom-wp-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0208, PIN_OUTPUT, 7) /* (D12) SPI0_CS0.GPIO1_42 */ >; }; - leds_pins_default: leds-pins-default { + leds_pins_default: leds-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0030, PIN_OUTPUT, 7) /* (L18) OSPI0_CSn1.GPIO0_12 */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0260, PIN_INPUT, 0) /* (A18) I2C0_SCL */ AM64X_IOPAD(0x0264, PIN_INPUT, 0) /* (B18) I2C0_SDA */ >; }; - ospi0_pins_default: ospi0-pins-default { + ospi0_pins_default: ospi0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ @@ -160,30 +160,6 @@ status = "disabled"; }; -&mailbox0_cluster2 { - status = "disabled"; -}; - -&mailbox0_cluster3 { - status = "disabled"; -}; - -&mailbox0_cluster4 { - status = "disabled"; -}; - -&mailbox0_cluster5 { - status = "disabled"; -}; - -&mailbox0_cluster6 { - status = "disabled"; -}; - -&mailbox0_cluster7 { - status = "disabled"; -}; - &main_i2c0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi new file mode 100644 index 000000000000..036db56ba797 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +thermal_zones: thermal-zones { + main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&main_vtm0 0>; + + trips { + main0_crit: main0-crit { + temperature = <105000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&main_vtm0 1>; + + trips { + main1_crit: main1-crit { + temperature = <105000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi index 60fe95b48312..8e9c2bc70f4d 100644 --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi @@ -19,22 +19,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &mcu_uart0; - serial1 = &mcu_uart1; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - serial5 = &main_uart3; - serial6 = &main_uart4; - serial7 = &main_uart5; - serial8 = &main_uart6; - ethernet0 = &cpsw_port1; - ethernet1 = &cpsw_port2; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - }; - chosen { }; firmware { @@ -70,6 +54,7 @@ <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */ + <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */ <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */ @@ -106,6 +91,8 @@ ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */ }; }; + + #include "k3-am64-thermal.dtsi" }; /* Now include the peripherals for each bus segments */ diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 39feea78a084..15c282c93467 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -17,15 +17,26 @@ model = "Texas Instruments AM642 EVM"; chosen { - stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + stdout-path = &main_uart0; + }; + + aliases { + serial0 = &mcu_uart0; + serial1 = &main_uart1; + serial2 = &main_uart0; + serial3 = &main_uart3; + i2c0 = &main_i2c0; + i2c1 = &main_i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; }; memory@80000000 { device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; reserved-memory { @@ -94,7 +105,7 @@ }; }; - evm_12v0: fixedregulator-evm12v0 { + evm_12v0: regulator-0 { /* main DC jack */ compatible = "regulator-fixed"; regulator-name = "evm_12v0"; @@ -104,7 +115,7 @@ regulator-boot-on; }; - vsys_5v0: fixedregulator-vsys5v0 { + vsys_5v0: regulator-1 { /* output of LM5140 */ compatible = "regulator-fixed"; regulator-name = "vsys_5v0"; @@ -115,7 +126,7 @@ regulator-boot-on; }; - vsys_3v3: fixedregulator-vsys3v3 { + vsys_3v3: regulator-2 { /* output of LM5140 */ compatible = "regulator-fixed"; regulator-name = "vsys_3v3"; @@ -126,7 +137,7 @@ regulator-boot-on; }; - vdd_mmc1: fixed-regulator-sd { + vdd_mmc1: regulator-3 { /* TPS2051BD */ compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; @@ -138,7 +149,7 @@ gpio = <&exp1 6 GPIO_ACTIVE_HIGH>; }; - vddb: fixedregulator-vddb { + vddb: regulator-4 { compatible = "regulator-fixed"; regulator-name = "vddb_3v3_display"; regulator-min-microvolt = <3300000>; @@ -148,6 +159,20 @@ regulator-boot-on; }; + vtt_supply: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "vtt"; + pinctrl-names = "default"; + pinctrl-0 = <&ddr_vtt_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; + vin-supply = <&vsys_3v3>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + leds { compatible = "gpio-leds"; @@ -201,7 +226,7 @@ }; &main_pmx0 { - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ @@ -215,7 +240,16 @@ >; }; - main_uart0_pins_default: main-uart0-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ + AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ + AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ + AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ + >; + }; + + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ @@ -224,7 +258,7 @@ >; }; - main_spi0_pins_default: main-spi0-pins-default { + main_spi0_pins_default: main-spi0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */ AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */ @@ -233,21 +267,28 @@ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ + AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ >; }; - mdio1_pins_default: mdio1-pins-default { + mdio1_pins_default: mdio1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ >; }; - rgmii1_pins_default: rgmii1-pins-default { + rgmii1_pins_default: rgmii1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ @@ -264,7 +305,7 @@ >; }; - rgmii2_pins_default: rgmii2-pins-default { + rgmii2_pins_default: rgmii2-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ @@ -281,13 +322,13 @@ >; }; - main_usb0_pins_default: main-usb0-pins-default { + main_usb0_pins_default: main-usb0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; - ospi0_pins_default: ospi0-pins-default { + ospi0_pins_default: ospi0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ @@ -303,36 +344,58 @@ >; }; - main_ecap0_pins_default: main-ecap0-pins-default { + main_ecap0_pins_default: main-ecap0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ >; }; - main_mcan0_pins_default: main-mcan0-pins-default { + main_mcan0_pins_default: main-mcan0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ >; }; - main_mcan1_pins_default: main-mcan1-pins-default { + main_mcan1_pins_default: main-mcan1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ >; }; + + ddr_vtt_pins_default: ddr-vtt-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */ + >; + }; }; &main_uart0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + current-speed = <115200>; }; /* main_uart1 is reserved for firmware usage */ &main_uart1 { status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + /* AT24CM01 */ + compatible = "atmel,24c1024"; + reg = <0x50>; + }; }; &main_i2c1 { @@ -425,8 +488,7 @@ &cpsw3g { pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins_default - &rgmii2_pins_default>; + pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; }; &cpsw_port1 { @@ -471,10 +533,53 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "ospi.tispl"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "ospi.u-boot"; + reg = <0x300000 0x400000>; + }; + + partition@700000 { + label = "ospi.env"; + reg = <0x700000 0x40000>; + }; + + partition@740000 { + label = "ospi.env.backup"; + reg = <0x740000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; }; }; &mailbox0_cluster2 { + status = "okay"; + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; @@ -486,11 +591,9 @@ }; }; -&mailbox0_cluster3 { - status = "disabled"; -}; - &mailbox0_cluster4 { + status = "okay"; + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; @@ -502,41 +605,35 @@ }; }; -&mailbox0_cluster5 { - status = "disabled"; -}; - &mailbox0_cluster6 { + status = "okay"; + mbox_m4_0: mbox-m4-0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; }; }; -&mailbox0_cluster7 { - status = "disabled"; -}; - &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts index 8d3114d14a8b..9c418abd29d8 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts @@ -15,6 +15,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/leds/leds-pca9532.h> #include <dt-bindings/mux/ti-serdes.h> #include <dt-bindings/phy/phy.h> #include "k3-am642.dtsi" @@ -75,7 +76,7 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&leds_pins_default &user_leds_pins_default>; + pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>; led-1 { color = <LED_COLOR_ID_RED>; @@ -104,47 +105,47 @@ }; &main_pmx0 { - can_tc1_pins_default: can-tc1-pins-default { + can_tc1_pins_default: can-tc1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (P16) GPMC0_ADVn_ALE.GPIO0_32 */ >; }; - can_tc2_pins_default: can-tc2-pins-default { + can_tc2_pins_default: can-tc2-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0090, PIN_OUTPUT, 7) /* (P17) GPMC0_BE0n_CLE.GPIO0_35 */ >; }; - gpio_keys_pins_default: gpio-keys-pins-default { + gpio_keys_pins_default: gpio-keys-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0044, PIN_INPUT, 7) /* (T18) GPMC0_AD2.GPIO0_17 */ AM64X_IOPAD(0x0054, PIN_INPUT, 7) /* (V20) GPMC0_AD6.GPIO0_21 */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT, 0) /* (B19) I2C1_SDA */ >; }; - main_mcan0_pins_default: main-mcan0-pins-default { + main_mcan0_pins_default: main-mcan0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ >; }; - main_mcan1_pins_default: main-mcan1-pins-default { + main_mcan1_pins_default: main-mcan1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ @@ -157,14 +158,14 @@ >; }; - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ >; }; - main_uart1_pins_default: main-uart1-pins-default { + main_uart1_pins_default: main-uart1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ AM64X_IOPAD(0x024C, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ @@ -173,25 +174,25 @@ >; }; - main_usb0_pins_default: main-usb0-pins-default { + main_usb0_pins_default: main-usb0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; - pcie_usb_sel_pins_default: pcie-usb-sel-pins-default { + pcie_usb_sel_pins_default: pcie-usb-sel-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x017c, PIN_OUTPUT, 7) /* (T1) PRG0_PRU0_GPO7.GPIO1_7 */ >; }; - pcie0_pins_default: pcie0-pins-default { + pcie0_pins_default: pcie0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (W19) GPMC0_WAIT0.GPIO0_37 */ >; }; - user_leds_pins_default: user-leds-pins-default { + user_leds_pins_default: user-leds-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x003c, PIN_OUTPUT, 7) /* (T20) GPMC0_AD0.GPIO0_15 */ AM64X_IOPAD(0x0040, PIN_OUTPUT, 7) /* (U21) GPMC0_AD1.GPIO0_16 */ @@ -210,6 +211,26 @@ pagesize = <16>; reg = <0x51>; }; + + led-controller@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led-3 { + label = "red:user"; + type = <PCA9532_TYPE_LED>; + }; + + led-4 { + label = "green:user"; + type = <PCA9532_TYPE_LED>; + }; + + led-5 { + label = "blue:user"; + type = <PCA9532_TYPE_LED>; + }; + }; }; &main_mcan0 { @@ -230,6 +251,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + current-speed = <115200>; }; &main_uart1 { @@ -237,6 +259,7 @@ pinctrl-names = "default"; pinctrl-0 = <&main_uart1_pins_default>; uart-has-rtscts; + current-speed = <115200>; }; &sdhci1 { diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 2e2d40da360a..cbce43dbe3f9 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -17,15 +17,25 @@ model = "Texas Instruments AM642 SK"; chosen { - stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + stdout-path = &main_uart0; + }; + + aliases { + serial0 = &mcu_uart0; + serial1 = &main_uart1; + serial2 = &main_uart0; + i2c0 = &main_i2c0; + i2c1 = &main_i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; }; memory@80000000 { device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; reserved-memory { @@ -94,7 +104,7 @@ }; }; - vusb_main: fixed-regulator-vusb-main5v0 { + vusb_main: regulator-0 { /* USB MAIN INPUT 5V DC */ compatible = "regulator-fixed"; regulator-name = "vusb_main5v0"; @@ -104,7 +114,7 @@ regulator-boot-on; }; - vcc_3v3_sys: fixedregulator-vcc-3v3-sys { + vcc_3v3_sys: regulator-1 { /* output of LP8733xx */ compatible = "regulator-fixed"; regulator-name = "vcc_3v3_sys"; @@ -115,7 +125,7 @@ regulator-boot-on; }; - vdd_mmc1: fixed-regulator-sd { + vdd_mmc1: regulator-2 { /* TPS2051BD */ compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; @@ -127,7 +137,7 @@ gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; }; - com8_ls_en: regulator-1 { + com8_ls_en: regulator-3 { compatible = "regulator-fixed"; regulator-name = "com8_ls_en"; regulator-min-microvolt = <3300000>; @@ -139,7 +149,7 @@ gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>; }; - wlan_en: regulator-2 { + wlan_en: regulator-4 { /* output of SN74AVC4T245RSVR */ compatible = "regulator-fixed"; regulator-name = "wlan_en"; @@ -222,20 +232,21 @@ }; &main_pmx0 { - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < - AM64X_IOPAD(0x0294, PIN_INPUT, 0) /* (J19) MMC1_CMD */ + AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */ + AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ + AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* (#N/A) MMC1_CLKLB */ - AM64X_IOPAD(0x028c, PIN_INPUT, 0) /* (L20) MMC1_CLK */ - AM64X_IOPAD(0x0288, PIN_INPUT, 0) /* (K21) MMC1_DAT0 */ - AM64X_IOPAD(0x0284, PIN_INPUT, 0) /* (L21) MMC1_DAT1 */ - AM64X_IOPAD(0x0280, PIN_INPUT, 0) /* (K19) MMC1_DAT2 */ - AM64X_IOPAD(0x027c, PIN_INPUT, 0) /* (K18) MMC1_DAT3 */ - AM64X_IOPAD(0x0298, PIN_INPUT, 0) /* (D19) MMC1_SDCD */ + AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ + AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ + AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ + AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ + AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ >; }; - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ @@ -244,27 +255,43 @@ >; }; - main_usb0_pins_default: main-usb0-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ + AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ + AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ + AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ + >; + }; + + main_usb0_pins_default: main-usb0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ + AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ >; }; - mdio1_pins_default: mdio1-pins-default { + mdio1_pins_default: mdio1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ >; }; - rgmii1_pins_default: rgmii1-pins-default { + rgmii1_pins_default: rgmii1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */ AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */ @@ -281,7 +308,7 @@ >; }; - rgmii2_pins_default: rgmii2-pins-default { + rgmii2_pins_default: rgmii2-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ @@ -298,7 +325,7 @@ >; }; - ospi0_pins_default: ospi0-pins-default { + ospi0_pins_default: ospi0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ @@ -314,24 +341,24 @@ >; }; - main_ecap0_pins_default: main-ecap0-pins-default { + main_ecap0_pins_default: main-ecap0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ >; }; - main_wlan_en_pins_default: main-wlan-en-pins-default { + main_wlan_en_pins_default: main-wlan-en-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */ >; }; - main_com8_ls_en_pins_default: main-com8-ls-en-pins-default { + main_com8_ls_en_pins_default: main-com8-ls-en-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */ >; }; - main_wlan_pins_default: main-wlan-pins-default { + main_wlan_pins_default: main-wlan-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */ >; @@ -342,11 +369,26 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + current-speed = <115200>; }; &main_uart1 { /* main_uart1 is reserved for firmware usage */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@51 { + compatible = "atmel,24c512"; + reg = <0x51>; + }; }; &main_i2c1 { @@ -439,8 +481,7 @@ &cpsw3g { pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins_default - &rgmii2_pins_default>; + pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; }; &cpsw_port1 { @@ -490,10 +531,53 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "ospi.tispl"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "ospi.u-boot"; + reg = <0x300000 0x400000>; + }; + + partition@700000 { + label = "ospi.env"; + reg = <0x700000 0x40000>; + }; + + partition@740000 { + label = "ospi.env.backup"; + reg = <0x740000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; }; }; &mailbox0_cluster2 { + status = "okay"; + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; @@ -505,11 +589,9 @@ }; }; -&mailbox0_cluster3 { - status = "disabled"; -}; - &mailbox0_cluster4 { + status = "okay"; + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; @@ -521,41 +603,35 @@ }; }; -&mailbox0_cluster5 { - status = "disabled"; -}; - &mailbox0_cluster6 { + status = "okay"; + mbox_m4_0: mbox-m4-0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; }; }; -&mailbox0_cluster7 { - status = "disabled"; -}; - &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index 96ac2b476b11..e26bd988e522 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -21,7 +21,6 @@ chosen { stdout-path = "serial3:115200n8"; - bootargs = "earlycon=ns16550a,mmio32,0x02810000"; }; reserved-memory { @@ -105,7 +104,7 @@ }; &wkup_pmx0 { - wkup_i2c0_pins_default: wkup-i2c0-pins-default { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < /* (AC7) WKUP_I2C0_SCL */ AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) @@ -114,7 +113,7 @@ >; }; - mcu_i2c0_pins_default: mcu-i2c0-pins-default { + mcu_i2c0_pins_default: mcu-i2c0-default-pins { pinctrl-single,pins = < /* (AD8) MCU_I2C0_SCL */ AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) @@ -123,21 +122,21 @@ >; }; - arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-pins-default { + arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins { pinctrl-single,pins = < /* (R2) WKUP_GPIO0_21 */ AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7) >; }; - push_button_pins_default: push-button-pins-default { + push_button_pins_default: push-button-default-pins { pinctrl-single,pins = < /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) >; }; - arduino_uart_pins_default: arduino-uart-pins-default { + arduino_uart_pins_default: arduino-uart-default-pins { pinctrl-single,pins = < /* (P4) MCU_UART0_RXD */ AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) @@ -146,7 +145,7 @@ >; }; - arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-pins-default { + arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins { pinctrl-single,pins = < /* (P1) WKUP_GPIO0_31 */ AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7) @@ -155,7 +154,7 @@ >; }; - arduino_io_oe_pins_default: arduino-io-oe-pins-default { + arduino_io_oe_pins_default: arduino-io-oe-default-pins { pinctrl-single,pins = < /* (N4) WKUP_GPIO0_34 */ AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7) @@ -170,7 +169,7 @@ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < /* (V1) MCU_OSPI0_CLK */ AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) @@ -185,7 +184,7 @@ >; }; - db9_com_mode_pins_default: db9-com-mode-pins-default { + db9_com_mode_pins_default: db9-com-mode-default-pins { pinctrl-single,pins = < /* (AD3) WKUP_GPIO0_5, used as uart0 mode 0 */ AM65X_WKUP_IOPAD(0x00c4, PIN_OUTPUT, 7) @@ -198,7 +197,7 @@ >; }; - leds_pins_default: leds-pins-default { + leds_pins_default: leds-default-pins { pinctrl-single,pins = < /* (T2) WKUP_GPIO0_17, used as user led1 red */ AM65X_WKUP_IOPAD(0x0014, PIN_OUTPUT, 7) @@ -211,7 +210,7 @@ >; }; - mcu_spi0_pins_default: mcu-spi0-pins-default { + mcu_spi0_pins_default: mcu-spi0-default-pins { pinctrl-single,pins = < /* (Y1) MCU_SPI0_CLK */ AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0) @@ -224,7 +223,7 @@ >; }; - minipcie_pins_default: minipcie-pins-default { + minipcie_pins_default: minipcie-default-pins { pinctrl-single,pins = < /* (P2) MCU_OSPI1_DQS.WKUP_GPIO0_27 */ AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7) @@ -233,7 +232,7 @@ }; &main_pmx0 { - main_uart1_pins_default: main-uart1-pins-default { + main_uart1_pins_default: main-uart1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */ AM65X_IOPAD(0x014c, PIN_OUTPUT, 6) /* (AD23) UART1_TXD */ @@ -242,14 +241,14 @@ >; }; - main_i2c3_pins_default: main-i2c3-pins-default { + main_i2c3_pins_default: main-i2c3-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01c0, PIN_INPUT, 2) /* (AF13) I2C3_SCL */ AM65X_IOPAD(0x01d4, PIN_INPUT, 2) /* (AG12) I2C3_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ @@ -262,19 +261,19 @@ >; }; - usb0_pins_default: usb0-pins-default { + usb0_pins_default: usb0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ >; }; - usb1_pins_default: usb1-pins-default { + usb1_pins_default: usb1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ >; }; - arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-pins-default { + arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (AG18) GPIO0_33 */ AM65X_IOPAD(0x008C, PIN_OUTPUT, 7) /* (AF17) GPIO0_35 */ @@ -285,7 +284,7 @@ >; }; - dss_vout1_pins_default: dss-vout1-pins-default { + dss_vout1_pins_default: dss-vout1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */ AM65X_IOPAD(0x0004, PIN_OUTPUT, 1) /* VOUT1_DATA1 */ @@ -318,13 +317,13 @@ >; }; - dp_pins_default: dp-pins-default { + dp_pins_default: dp-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AF18) DP rst_n */ >; }; - main_i2c2_pins_default: main-i2c2-pins-default { + main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) I2C2_SCL */ AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */ @@ -333,21 +332,21 @@ }; &main_pmx1 { - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ >; }; - ecap0_pins_default: ecap0-pins-default { + ecap0_pins_default: ecap0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ >; @@ -385,13 +384,12 @@ &wkup_gpio0 { pinctrl-names = "default"; - pinctrl-0 = < - &arduino_io_d2_to_d3_pins_default - &arduino_i2c_aio_switch_pins_default - &arduino_io_oe_pins_default - &push_button_pins_default - &db9_com_mode_pins_default - >; + pinctrl-0 = + <&arduino_io_d2_to_d3_pins_default>, + <&arduino_i2c_aio_switch_pins_default>, + <&arduino_io_oe_pins_default>, + <&push_button_pins_default>, + <&db9_com_mode_pins_default>; gpio-line-names = /* 0..9 */ "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0", @@ -483,7 +481,7 @@ pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; - rtc: rtc8564@51 { + rtc: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; @@ -712,11 +710,11 @@ &mcu_r5fss0_core0 { memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; }; &mcu_r5fss0_core1 { memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; - mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 1adba2f2c153..3f8ff2589842 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -469,7 +469,6 @@ ti,otap-del-sel-ddr52 = <0x4>; ti,otap-del-sel-hs200 = <0x7>; ti,clkbuf-sel = <0x7>; - ti,otap-del-sel = <0x2>; ti,trm-icp = <0x8>; dma-coherent; }; @@ -481,21 +480,6 @@ #size-cells = <1>; ranges = <0x0 0x0 0x00100000 0x1c000>; - pcie0_mode: pcie-mode@4060 { - compatible = "syscon"; - reg = <0x00004060 0x4>; - }; - - pcie1_mode: pcie-mode@4070 { - compatible = "syscon"; - reg = <0x00004070 0x4>; - }; - - pcie_devid: pcie-devid@210 { - compatible = "syscon"; - reg = <0x00000210 0x4>; - }; - serdes0_clk: clock@4080 { compatible = "syscon"; reg = <0x00004080 0x4>; @@ -883,8 +867,8 @@ #size-cells = <2>; ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000>, <0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; - ti,syscon-pcie-id = <&pcie_devid>; - ti,syscon-pcie-mode = <&pcie0_mode>; + ti,syscon-pcie-id = <&scm_conf 0x210>; + ti,syscon-pcie-mode = <&scm_conf 0x4060>; bus-range = <0x0 0xff>; num-viewport = <16>; max-link-speed = <2>; @@ -900,7 +884,7 @@ reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; reg-names = "app", "dbics", "addr_space", "atu"; power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; - ti,syscon-pcie-mode = <&pcie0_mode>; + ti,syscon-pcie-mode = <&scm_conf 0x4060>; num-ib-windows = <16>; num-ob-windows = <16>; max-link-speed = <2>; @@ -918,8 +902,8 @@ #size-cells = <2>; ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000>, <0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; - ti,syscon-pcie-id = <&pcie_devid>; - ti,syscon-pcie-mode = <&pcie1_mode>; + ti,syscon-pcie-id = <&scm_conf 0x210>; + ti,syscon-pcie-mode = <&scm_conf 0x4070>; bus-range = <0x0 0xff>; num-viewport = <16>; max-link-speed = <2>; @@ -935,7 +919,7 @@ reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; reg-names = "app", "dbics", "addr_space", "atu"; power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; - ti,syscon-pcie-mode = <&pcie1_mode>; + ti,syscon-pcie-mode = <&scm_conf 0x4070>; num-ib-windows = <16>; num-ob-windows = <16>; max-link-speed = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 5dfa31840e9c..b7a4b5a89aaf 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -227,7 +227,22 @@ }; }; - m_can0: mcan@40528000 { + secure_proxy_mcu: mailbox@2a480000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x0 0x2a480000 0x0 0x80000>, + <0x0 0x2a380000 0x0 0x80000>, + <0x0 0x2a400000 0x0 0x80000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + + m_can0: can@40528000 { compatible = "bosch,m_can"; reg = <0x0 0x40528000 0x0 0x400>, <0x0 0x40500000 0x0 0x4400>; @@ -243,7 +258,7 @@ status = "disabled"; }; - m_can1: mcan@40568000 { + m_can1: can@40568000 { compatible = "bosch,m_can"; reg = <0x0 0x40568000 0x0 0x400>, <0x0 0x40540000 0x0 0x4400>; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index 3093ef6b9b23..4d7b6155a76b 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -19,23 +19,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &wkup_uart0; - serial1 = &mcu_uart0; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - i2c0 = &wkup_i2c0; - i2c1 = &mcu_i2c0; - i2c2 = &main_i2c0; - i2c3 = &main_i2c1; - i2c4 = &main_i2c2; - i2c5 = &main_i2c3; - ethernet0 = &cpsw_port1; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - }; - chosen { }; firmware { diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi index cd43fd11a5c2..5ab434c02ab6 100644 --- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi @@ -35,7 +35,7 @@ }; &main_pmx0 { - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso new file mode 100644 index 000000000000..3be92c39ecba --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for AM654-EVM. + * Panel Link: https://www.digimax.it/en/tft-lcd/20881-RK101II01D-CT + * AM654 LCD EVM: https://www.ti.com/tool/TMDSLCD1EVM + * + * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&{/} { + display0 { + compatible = "rocktech,rk101ii01d-ct"; + backlight = <&lcd_bl>; + enable-gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>; + port { + lcd_in0: endpoint { + remote-endpoint = <&oldi_out0>; + }; + }; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = + <0 32 64 96 128 160 192 224 255>; + default-brightness-level = <8>; + }; +}; + +&dss { + status = "okay"; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + oldi_out0: endpoint { + remote-endpoint = <&lcd_in0>; + }; + }; +}; + +&main_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@14 { + compatible = "goodix,gt928"; + reg = <0x14>; + + interrupt-parent = <&pca9554>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <1280>; + touchscreen-size-y = <800>; + + reset-gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>; + irq-gpios = <&pca9554 3 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 592ab2b54cb3..973a89b04a22 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -13,9 +13,22 @@ compatible = "ti,am654-evm", "ti,am654"; model = "Texas Instruments AM654 Base Board"; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + i2c0 = &wkup_i2c0; + i2c1 = &mcu_i2c0; + i2c2 = &main_i2c0; + i2c3 = &main_i2c1; + i2c4 = &main_i2c2; + ethernet0 = &cpsw_port1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + }; + chosen { stdout-path = "serial2:115200n8"; - bootargs = "earlycon=ns16550a,mmio32,0x02800000"; }; memory@80000000 { @@ -86,7 +99,7 @@ }; }; - evm_12v0: fixedregulator-evm12v0 { + evm_12v0: regulator-0 { /* main supply */ compatible = "regulator-fixed"; regulator-name = "evm_12v0"; @@ -96,7 +109,7 @@ regulator-boot-on; }; - vcc3v3_io: fixedregulator-vcc3v3io { + vcc3v3_io: regulator-1 { /* Output of TPS54334 */ compatible = "regulator-fixed"; regulator-name = "vcc3v3_io"; @@ -107,7 +120,7 @@ vin-supply = <&evm_12v0>; }; - vdd_mmc1_sd: fixedregulator-sd { + vdd_mmc1_sd: regulator-2 { compatible = "regulator-fixed"; regulator-name = "vdd_mmc1_sd"; regulator-min-microvolt = <3300000>; @@ -117,24 +130,53 @@ vin-supply = <&vcc3v3_io>; gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>; }; + + vtt_supply: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "vtt"; + pinctrl-names = "default"; + pinctrl-0 = <&ddr_vtt_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_io>; + gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>; + }; }; &wkup_pmx0 { - wkup_i2c0_pins_default: wkup-i2c0-pins-default { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0) /* (AB1) WKUP_UART0_RXD */ + AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5) WKUP_UART0_TXD */ + AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + >; + }; + + ddr_vtt_pins_default: ddr-vtt-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */ + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ >; }; - push_button_pins_default: push-button-pins-default { + push_button_pins_default: push-button-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */ AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ @@ -156,7 +198,16 @@ >; }; - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) /* (P4) MCU_OSPI1_D1.MCU_UART0_RXD */ + AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) /* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) /* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */ + AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) /* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */ + >; + }; + + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */ AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */ @@ -173,16 +224,23 @@ >; }; - mcu_mdio_pins_default: mcu-mdio1-pins-default { + mcu_mdio_pins_default: mcu-mdio1-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ >; }; + + mcu_i2c0_pins_default: mcu-i2c0-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) /* (AD8) MCU_I2C0_SCL */ + AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) /* (AD7) MCU_I2C0_SDA */ + >; + }; }; &main_pmx0 { - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ @@ -191,14 +249,14 @@ >; }; - main_i2c2_pins_default: main-i2c2-pins-default { + main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */ AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */ >; }; - main_spi0_pins_default: main-spi0-pins-default { + main_spi0_pins_default: main-spi0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */ AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */ @@ -207,7 +265,7 @@ >; }; - main_mmc0_pins_default: main-mmc0-pins-default { + main_mmc0_pins_default: main-mmc0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ @@ -224,7 +282,7 @@ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ @@ -237,7 +295,7 @@ >; }; - usb1_pins_default: usb1-pins-default { + usb1_pins_default: usb1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ >; @@ -245,21 +303,21 @@ }; &main_pmx1 { - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ >; }; - ecap0_pins_default: ecap0-pins-default { + ecap0_pins_default: ecap0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ >; @@ -269,11 +327,14 @@ &wkup_uart0 { /* Wakeup UART is used by System firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; &mcu_uart0 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; }; &main_uart0 { @@ -289,6 +350,25 @@ pinctrl-0 = <&wkup_i2c0_pins_default>; clock-frequency = <400000>; + eeprom@50 { + /* AT24CM01 */ + compatible = "atmel,24c1024"; + reg = <0x50>; + }; + + vdd_mpu: regulator@60 { + compatible = "ti,tps62363"; + reg = <0x60>; + regulator-name = "VDD_MPU"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1770000>; + regulator-always-on; + regulator-boot-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + ti,enable-vout-discharge; + }; + pca9554: gpio@39 { compatible = "nxp,pca9554"; reg = <0x39>; @@ -305,7 +385,9 @@ &mcu_i2c0 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c0_pins_default>; + clock-frequency = <400000>; }; &main_i2c0 { @@ -438,13 +520,13 @@ &mcu_r5fss0_core0 { memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; }; &mcu_r5fss0_core1 { memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; - mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; }; &ospi0 { @@ -462,6 +544,52 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x20000>; + }; + + partition@6a0000 { + label = "ospi.env.backup"; + reg = <0x6a0000 0x20000>; + }; + + partition@6c0000 { + label = "ospi.sysfw"; + reg = <0x6c0000 0x100000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fe0000 { + label = "ospi.phypattern"; + reg = <0x3fe0000 0x20000>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi index 4cc329b271ac..888567b921f0 100644 --- a/arch/arm64/boot/dts/ti/k3-am654.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi @@ -113,6 +113,7 @@ msmc_l3: l3-cache0 { compatible = "cache"; cache-level = <3>; + cache-unified; }; thermal_zones: thermal-zones { diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi index 0f67e1ec0fb8..be55494b1f3f 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi @@ -22,7 +22,7 @@ }; &main_pmx0 { - main_mmc0_pins_default: main-mmc0-pins-default { + main_mmc0_pins_default: main-mmc0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts index 9400e35882a6..cbe44634914f 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts @@ -27,7 +27,7 @@ }; &main_pmx0 { - main_m2_enable_pins_default: main-m2-enable-pins-default { + main_m2_enable_pins_default: main-m2-enable-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ >; @@ -39,7 +39,7 @@ >; }; - main_pmx0_m2_config_pins_default: main-pmx0-m2-config-pins-default { + main_pmx0_m2_config_pins_default: main-pmx0-m2-config-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01c8, PIN_INPUT_PULLUP, 7) /* (AE13) GPIO1_18 */ AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7) /* (AD13) GPIO1_19 */ @@ -56,7 +56,7 @@ }; &main_pmx1 { - main_pmx1_m2_config_pins_default: main-pmx1-m2-config-pins-default { + main_pmx1_m2_config_pins_default: main-pmx1-m2-config-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0018, PIN_INPUT_PULLUP, 7) /* (B22) GPIO1_88 */ AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7) /* (C23) GPIO1_89 */ @@ -66,20 +66,18 @@ &main_gpio0 { pinctrl-names = "default"; - pinctrl-0 = < - &main_m2_pcie_mux_control - &arduino_io_d4_to_d9_pins_default - >; + pinctrl-0 = + <&main_m2_pcie_mux_control>, + <&arduino_io_d4_to_d9_pins_default>; }; &main_gpio1 { pinctrl-names = "default"; - pinctrl-0 = < - &main_m2_enable_pins_default - &main_pmx0_m2_config_pins_default - &main_pmx1_m2_config_pins_default - &cp2102n_reset_pin_default - >; + pinctrl-0 = + <&main_m2_enable_pins_default>, + <&main_pmx0_m2_config_pins_default>, + <&main_pmx1_m2_config_pins_default>, + <&cp2102n_reset_pin_default>; }; /* diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 27a43a8ecffd..d5889ba3fa46 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -22,6 +22,8 @@ }; aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; serial2 = &main_uart8; mmc1 = &main_sdhci1; can0 = &mcu_mcan0; @@ -122,21 +124,21 @@ }; &main_pmx0 { - main_uart8_pins_default: main-uart8-pins-default { + main_uart8_pins_default: main-uart8-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */ J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x0e0, PIN_INPUT, 0) /* (AH25) I2C0_SCL */ J721S2_IOPAD(0x0e4, PIN_INPUT, 0) /* (AE24) I2C0_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */ J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */ @@ -148,80 +150,156 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x0c4, PIN_INPUT, 7) /* (AB26) ECAP0_IN_APWM_OUT.GPIO0_49 */ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AG25) TIMER_IO1.USB0_DRVVBUS */ >; }; - main_mcan6_pins_default: main-mcan6-pins-default { + main_mcan6_pins_default: main-mcan6-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x098, PIN_INPUT, 0) /* (V25) MCASP0_AXR10.MCAN6_RX */ J721S2_IOPAD(0x094, PIN_INPUT, 0) /* (AA25) MCASP0_AXR9.MCAN6_TX */ >; }; - main_mcan7_pins_default: main-mcan7-pins-default { + main_mcan7_pins_default: main-mcan7-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x0a0, PIN_INPUT, 0) /* (AB25) MCASP0_AXR12.MCAN7_RX */ J721S2_IOPAD(0x09c, PIN_INPUT, 0) /* (T24) MCASP0_AXR11.MCAN7_TX */ >; }; + + main_i2c4_pins_default: main-i2c4-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) MCAN13_RX.I2C4_SDA */ + J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) MCAN14_TX.I2C4_SCL */ + >; + }; + + rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0a8, PIN_INPUT, 7) /* (U24) MCASP0_AXR14.GPIO0_42 */ + J721S2_IOPAD(0x090, PIN_INPUT, 7) /* (W24) MCASP0_AXR8.GPIO0_36 */ + J721S2_IOPAD(0x0bc, PIN_INPUT, 7) /* (V28) MCASP1_AFSX.GPIO0_47 */ + J721S2_IOPAD(0x06c, PIN_INPUT, 7) /* (V26) MCAN1_TX.GPIO0_27 */ + J721S2_IOPAD(0x004, PIN_INPUT, 7) /* (W25) MCAN12_TX.GPIO0_1 */ + J721S2_IOPAD(0x008, PIN_INPUT, 7) /* (AC24) MCAN12_RX.GPIO0_2 */ + J721S2_IOPAD(0x0b8, PIN_INPUT, 7) /* (AA24) MCASP1_ACLKX.GPIO0_46 */ + J721S2_IOPAD(0x00c, PIN_INPUT, 7) /* (AE28) MCAN13_TX.GPIO0_3 */ + J721S2_IOPAD(0x034, PIN_INPUT, 7) /* (AD24) PMIC_WAKE0.GPIO0_13 */ + J721S2_IOPAD(0x0a4, PIN_INPUT, 7) /* (T23) MCASP0_AXR13.GPIO0_41 */ + J721S2_IOPAD(0x0c0, PIN_INPUT, 7) /* (T28) MCASP1_AXR0.GPIO0_48 */ + J721S2_IOPAD(0x0b4, PIN_INPUT, 7) /* (U25) MCASP1_AXR4.GPIO0_45 */ + J721S2_IOPAD(0x0cc, PIN_INPUT, 7) /* (AE27) SPI0_CS0.GPIO0_51 */ + J721S2_IOPAD(0x08c, PIN_INPUT, 7) /* (T25) MCASP0_AXR7.GPIO0_35 */ + >; + }; }; -&wkup_pmx0 { - mcu_cpsw_pins_default: mcu-cpsw-pins-default { +&wkup_pmx2 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */ + >; + }; + + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */ - J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */ - J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */ - J721S2_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */ - J721S2_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */ - J721S2_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */ - J721S2_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */ - J721S2_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */ - J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */ - J721S2_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ - J721S2_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ - J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ + J721S2_WKUP_IOPAD(0x02C, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */ + J721S2_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */ + J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */ + J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */ + J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */ + J721S2_WKUP_IOPAD(0x00C, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */ + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ + J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ >; }; - mcu_mdio_pins_default: mcu-mdio-pins-default { + mcu_mdio_pins_default: mcu-mdio-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ - J721S2_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ + J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ + J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ >; }; - mcu_mcan0_pins_default: mcu-mcan0-pins-default { + mcu_mcan0_pins_default: mcu-mcan0-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0bc, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */ - J721S2_WKUP_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */ + J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */ + J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */ >; }; - mcu_mcan1_pins_default: mcu-mcan1-pins-default { + mcu_mcan1_pins_default: mcu-mcan1-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */ - J721S2_WKUP_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (C23) WKUP_GPIO0_4.MCU_MCAN1_TX*/ + J721S2_WKUP_IOPAD(0x06C, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */ + J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (C23) WKUP_GPIO0_4.MCU_MCAN1_TX*/ >; }; - mcu_i2c1_pins_default: mcu-i2c1-pins-default { + mcu_i2c0_pins_default: mcu-i2c0-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (F24) WKUP_GPIO0_8.MCU_I2C1_SCL */ - J721S2_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (H26) WKUP_GPIO0_9.MCU_I2C1_SDA */ + J721S2_WKUP_IOPAD(0x0a0, PIN_INPUT, 0) /* (G24) MCU_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x0a4, PIN_INPUT, 0) /* (J25) MCU_I2C0_SDA */ + >; + }; + + mcu_i2c1_pins_default: mcu-i2c1-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x078, PIN_INPUT, 0) /* (F24) WKUP_GPIO0_8.MCU_I2C1_SCL */ + J721S2_WKUP_IOPAD(0x07c, PIN_INPUT, 0) /* (H26) WKUP_GPIO0_9.MCU_I2C1_SDA */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */ + J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-pins0-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_66 */ + J721S2_WKUP_IOPAD(0x05C, PIN_INPUT, 7) /* (E24) MCU_SPI1_D0.WKUP_GPIO0_1 */ + J721S2_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (C28) MCU_SPI1_D1.WKUP_GPIO0_2 */ + J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (D26) MCU_SPI1_CLK.WKUP_GPIO0_0 */ + J721S2_WKUP_IOPAD(0x094, PIN_INPUT, 7) /* (D25) MCU_SPI1_CS2.WKUP_GPIO0_15*/ + J721S2_WKUP_IOPAD(0x0B8, PIN_INPUT, 7) /* (G27) WKUP_GPIO0_56 */ + J721S2_WKUP_IOPAD(0x114, PIN_INPUT, 7) /* (J26) WKUP_GPIO0_57 */ + J721S2_WKUP_IOPAD(0x11C, PIN_INPUT, 7) /* (J27) WKUP_GPIO0_67 */ + J721S2_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (C27) MCU_SPI1_CS0.WKUP_GPIO0_3 */ >; }; }; +&wkup_pmx3 { + mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-pins1-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */ + >; + }; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&rpi_header_gpio0_pins_default>; +}; + &main_gpio2 { status = "disabled"; }; @@ -235,7 +313,8 @@ }; &wkup_gpio0 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_rpi_header_gpio0_pins0_default>, <&mcu_rpi_header_gpio0_pins1_default>; }; &wkup_gpio1 { @@ -244,6 +323,14 @@ &wkup_uart0 { status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; +}; + +&mcu_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; }; &main_uart8 { @@ -271,6 +358,20 @@ }; }; +&main_i2c4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c4_pins_default>; + clock-frequency = <400000>; +}; + +&mcu_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c0_pins_default>; + clock-frequency = <400000>; +}; + &main_sdhci0 { /* Unused */ status = "disabled"; @@ -287,7 +388,7 @@ &mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; }; &davinci_mdio { diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi index e92431250729..6c9139f73201 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi @@ -27,3 +27,25 @@ }; }; }; + +&wkup_pmx2 { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (H24) WKUP_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x09c, PIN_INPUT, 0) /* (H27) WKUP_I2C0_SDA */ + >; + }; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@51 { + /* AT24C512C-MAHM-T */ + compatible = "atmel,24c512"; + reg = <0x51>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index bc49ba534790..d282c2c633c1 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -21,9 +21,14 @@ }; aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; serial2 = &main_uart8; + mmc0 = &main_sdhci0; mmc1 = &main_sdhci1; - i2c0 = &main_i2c0; + i2c0 = &wkup_i2c0; + i2c3 = &main_i2c0; + ethernet0 = &mcu_cpsw_port1; }; memory@80000000 { @@ -105,21 +110,21 @@ }; &main_pmx0 { - main_uart8_pins_default: main-uart8-pins-default { + main_uart8_pins_default: main-uart8-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */ J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */ J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ @@ -132,11 +137,147 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x0C4, PIN_INPUT, 7) /* (AD36) ECAP0_IN_APWM_OUT.GPIO0_49 */ >; }; + + rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0BC, PIN_INPUT, 7) /* (AD33) MCASP1_AFSX.GPIO0_47 */ + J784S4_IOPAD(0x06C, PIN_INPUT, 7) /* (AJ37) MCASP4_AFSX.GPIO0_27 */ + J784S4_IOPAD(0x0B4, PIN_INPUT, 7) /* (AL34) MCASP1_AXR4.GPIO0_45 */ + J784S4_IOPAD(0x0C0, PIN_INPUT, 7) /* (AD38) MCASP1_AXR0.GPIO0_48 */ + J784S4_IOPAD(0x00C, PIN_INPUT, 7) /* (AF33) MCAN13_TX.GPIO0_3 */ + J784S4_IOPAD(0x0B8, PIN_INPUT, 7) /* (AC34) MCASP1_ACLKX.GPIO0_46 */ + J784S4_IOPAD(0x090, PIN_INPUT, 7) /* (AC35) MCASP0_AXR8.GPIO0_36 */ + J784S4_IOPAD(0x0A8, PIN_INPUT, 7) /* (AF34) MCASP0_AXR14.GPIO0_42 */ + J784S4_IOPAD(0x0A4, PIN_INPUT, 7) /* (AJ36) MCASP0_AXR13.GPIO0_41 */ + J784S4_IOPAD(0x034, PIN_INPUT, 7) /* (AJ34) PMIC_WAKE0n.GPIO0_13 */ + J784S4_IOPAD(0x0CC, PIN_INPUT, 7) /* (AM37) SPI0_CS0.GPIO0_51 */ + J784S4_IOPAD(0x08C, PIN_INPUT, 7) /* (AE35) MCASP0_AXR7.GPIO0_35 */ + J784S4_IOPAD(0x008, PIN_INPUT, 7) /* (AJ33) MCAN12_RX.GPIO0_2 */ + J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */ + >; + }; +}; + +&wkup_pmx2 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */ + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */ + J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + mcu_i2c0_pins_default: mcu-i2c0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT_PULLUP, 0) /* (M35) MCU_I2C0_SCL */ + J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT_PULLUP, 0) /* (G34) MCU_I2C0_SDA */ + >; + }; + + mcu_cpsw_pins_default: mcu-cpsw-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ + J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ + J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ + J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ + J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ + J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ + J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ + J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ + >; + }; + + mcu_rpi_hdr1_gpio0_pins_default: mcu-rpi-hdr1-gpio0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (N34) WKUP_GPIO0_66 */ + J784S4_WKUP_IOPAD(0x05c, PIN_INPUT, 7) /* (J34) WKUP_GPIO0_1 */ + J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */ + J784S4_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (H38) WKUP_GPIO0_0 */ + J784S4_WKUP_IOPAD(0x0b8, PIN_INPUT, 7) /* (M37) WKUP_GPIO0_56 */ + J784S4_WKUP_IOPAD(0x114, PIN_INPUT, 7) /* (M36) WKUP_GPIO0_57 */ + J784S4_WKUP_IOPAD(0x094, PIN_INPUT, 7) /* (K37) WKUP_GPIO0_15 */ + J784S4_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (J36) WKUP_GPIO0_3 */ + J784S4_WKUP_IOPAD(0x11c, PIN_INPUT, 7) /* (M34) WKUP_GPIO0_67 */ + >; + }; +}; + +&wkup_pmx3 { + mcu_rpi_hdr2_gpio0_pins_default: mcu-rpi-hdr2-gpio0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x0, PIN_INPUT, 7) /* (M33) WKUP_GPIO0_49 */ + >; + }; +}; + +&wkup_uart0 { + /* Firmware usage */ + status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@51 { + /* AT24C512C-MAHM-T */ + compatible = "atmel,24c512"; + reg = <0x51>; + }; +}; + +&wkup_gpio0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_rpi_hdr1_gpio0_pins_default>, <&mcu_rpi_hdr2_gpio0_pins_default>; +}; + +&mcu_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; +}; + +&mcu_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c0_pins_default>; + clock-frequency = <400000>; }; &main_uart8 { @@ -165,6 +306,14 @@ }; }; +&main_sdhci0 { + /* eMMC */ + status = "okay"; + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + &main_sdhci1 { /* SD card */ status = "okay"; @@ -177,4 +326,27 @@ &main_gpio0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rpi_header_gpio0_pins_default>; +}; + +&mcu_cpsw { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; +}; + +&davinci_mdio { + mcu_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&mcu_cpsw_port1 { + status = "okay"; + phy-mode = "rgmii-rxid"; + phy-handle = <&mcu_phy0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 0d39d6b8cc0c..3cf288128c3f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -15,9 +15,18 @@ compatible = "ti,j7200-evm", "ti,j7200"; model = "Texas Instruments J7200 EVM"; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial5 = &main_uart3; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; + }; + chosen { stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; }; evm_12v0: fixedregulator-evm12v0 { @@ -80,48 +89,88 @@ }; }; +&wkup_pmx0 { + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */ + J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */ + J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */ + J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */ + >; + }; + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */ + J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */ + >; + }; +}; + &wkup_pmx2 { - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < - J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ - J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ - J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */ - J721E_WKUP_IOPAD(0x0074, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */ - J721E_WKUP_IOPAD(0x0078, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */ - J721E_WKUP_IOPAD(0x007c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */ - J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */ - J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ - J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ - J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ - J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ - J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ + J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ + J721E_WKUP_IOPAD(0x0004, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ + J721E_WKUP_IOPAD(0x0008, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */ + J721E_WKUP_IOPAD(0x000c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */ + J721E_WKUP_IOPAD(0x0010, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */ + J721E_WKUP_IOPAD(0x0014, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */ + J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */ + J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ + J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ + J721E_WKUP_IOPAD(0x002c, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ + J721E_WKUP_IOPAD(0x0018, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ >; }; - mcu_mdio_pins_default: mcu-mdio1-pins-default { + wkup_gpio_pins_default: wkup-gpio-default-pins { pinctrl-single,pins = < - J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ - J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ + J721E_WKUP_IOPAD(0x70, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio1-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0034, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ + J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ >; }; }; &main_pmx0 { - main_i2c0_pins_default: main-i2c0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < - J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ - J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ + J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */ + J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */ + J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */ + J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0xb8, PIN_INPUT, 0) /* (T18) UART1_RXD */ + J721E_IOPAD(0xbc, PIN_INPUT, 0) /* (T20) UART1_TXD */ + >; + }; + + main_uart3_pins_default: main-uart3-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x60, PIN_INPUT, 11) /* (T15) MCAN8_TX.UART3_CTSn */ + J721E_IOPAD(0x30, PIN_INPUT, 11) /* (Y18) MCAN2_TX.UART3_RXD */ + >; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */ J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */ J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */ @@ -134,7 +183,7 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */ >; @@ -142,7 +191,7 @@ }; &main_pmx1 { - main_usbss0_pins_default: main-usbss0-pins-default { + main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ >; @@ -152,22 +201,30 @@ &wkup_uart0 { /* Wakeup UART is used by System firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; &mcu_uart0 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; + clock-frequency = <96000000>; }; &main_uart0 { status = "okay"; /* Shared with ATF on this platform */ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; }; &main_uart1 { status = "okay"; /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; }; &main_uart2 { @@ -175,6 +232,13 @@ status = "reserved"; }; +&main_uart3 { + /* Shared with MCAN Interface */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart3_pins_default>; +}; + &main_gpio2 { status = "disabled"; }; @@ -187,13 +251,18 @@ status = "disabled"; }; +&wkup_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_gpio_pins_default>; +}; + &wkup_gpio1 { status = "disabled"; }; &mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; }; &davinci_mdio { diff --git a/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso index 31b932eebc0a..34a0747cbe69 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso +++ b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso @@ -92,7 +92,7 @@ }; &main_pmx0 { - mdio0_pins_default: mdio0-pins-default { + mdio0_pins_default: mdio0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x00a8, PIN_OUTPUT, 5) /* (W19) UART8_TXD.MDIO0_MDC */ J721E_IOPAD(0x00a4, PIN_INPUT, 5) /* (W14) UART8_RXD.MDIO0_MDIO */ diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index ef352e32f19d..ac62bbc1660d 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -392,6 +392,24 @@ }; }; + /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */ + main_timerio_input: pinctrl@104200 { + compatible = "pinctrl-single"; + reg = <0x0 0x104200 0x0 0x50>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x000001ff>; + }; + + /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */ + main_timerio_output: pinctrl@104280 { + compatible = "pinctrl-single"; + reg = <0x0 0x104280 0x0 0x20>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000001f>; + }; + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ @@ -971,6 +989,246 @@ assigned-clock-parents = <&k3_clks 253 5>; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 49 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 49 1>; + assigned-clock-parents = <&k3_clks 49 2>; + power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 50 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 50 1>, <&k3_clks 313 0>; + assigned-clock-parents = <&k3_clks 50 2>, <&k3_clks 313 1>; + power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 51 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 51 1>; + assigned-clock-parents = <&k3_clks 51 2>; + power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 52 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 52 1>, <&k3_clks 314 0>; + assigned-clock-parents = <&k3_clks 52 2>, <&k3_clks 314 1>; + power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 53 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 53 1>; + assigned-clock-parents = <&k3_clks 53 2>; + power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 54 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 54 1>, <&k3_clks 315 0>; + assigned-clock-parents = <&k3_clks 54 2>, <&k3_clks 315 1>; + power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 55 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 55 1>; + assigned-clock-parents = <&k3_clks 55 2>; + power-domains = <&k3_pds 55 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 57 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 57 1>, <&k3_clks 316 0>; + assigned-clock-parents = <&k3_clks 57 2>, <&k3_clks 316 1>; + power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer8: timer@2480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2480000 0x00 0x400>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 58 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 58 1>; + assigned-clock-parents = <&k3_clks 58 2>; + power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer9: timer@2490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2490000 0x00 0x400>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 59 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 59 1>, <&k3_clks 317 0>; + assigned-clock-parents = <&k3_clks 59 2>, <&k3_clks 317 1>; + power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer10: timer@24a0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24a0000 0x00 0x400>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 60 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 60 1>; + assigned-clock-parents = <&k3_clks 60 2>; + power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer11: timer@24b0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24b0000 0x00 0x400>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 62 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 62 1>, <&k3_clks 318 0>; + assigned-clock-parents = <&k3_clks 62 2>, <&k3_clks 318 1>; + power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer12: timer@24c0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24c0000 0x00 0x400>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 63 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 63 1>; + assigned-clock-parents = <&k3_clks 63 2>; + power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer13: timer@24d0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24d0000 0x00 0x400>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 64 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 64 1>, <&k3_clks 319 0>; + assigned-clock-parents = <&k3_clks 64 2>, <&k3_clks 319 1>; + power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer14: timer@24e0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24e0000 0x00 0x400>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 65 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 65 1>; + assigned-clock-parents = <&k3_clks 65 2>; + power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer15: timer@24f0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24f0000 0x00 0x400>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 66 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 66 1>, <&k3_clks 320 0>; + assigned-clock-parents = <&k3_clks 66 2>, <&k3_clks 320 1>; + power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer16: timer@2500000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2500000 0x00 0x400>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 67 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 67 1>; + assigned-clock-parents = <&k3_clks 67 2>; + power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer17: timer@2510000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2510000 0x00 0x400>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 68 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 68 1>, <&k3_clks 321 0>; + assigned-clock-parents = <&k3_clks 68 2>, <&k3_clks 321 1>; + power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer18: timer@2520000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2520000 0x00 0x400>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 69 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 69 1>; + assigned-clock-parents = <&k3_clks 69 2>; + power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer19: timer@2530000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2530000 0x00 0x400>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 70 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 70 1>, <&k3_clks 322 0>; + assigned-clock-parents = <&k3_clks 70 2>, <&k3_clks 322 1>; + power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + main_r5fss0: r5fss@5c00000 { compatible = "ti,j7200-r5fss"; ti,cluster-mode = <1>; @@ -1010,4 +1268,10 @@ ti,loczrama = <1>; }; }; + + main_esm: esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x700000 0x0 0x1000>; + ti,esm-pins = <656>, <657>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 331b4e482e41..c5e4c41effd1 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -34,6 +34,136 @@ }; }; + mcu_timer0: timer@40400000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40400000 0x00 0x400>; + interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 35 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 35 1>; + assigned-clock-parents = <&k3_clks 35 2>; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer1: timer@40410000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40410000 0x00 0x400>; + interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 71 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 71 1>, <&k3_clks 308 0>; + assigned-clock-parents = <&k3_clks 71 2>, <&k3_clks 308 1>; + power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer2: timer@40420000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40420000 0x00 0x400>; + interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 72 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 72 1>; + assigned-clock-parents = <&k3_clks 72 2>; + power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer3: timer@40430000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40430000 0x00 0x400>; + interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 73 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 73 1>, <&k3_clks 309 0>; + assigned-clock-parents = <&k3_clks 73 2>, <&k3_clks 309 1>; + power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer4: timer@40440000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40440000 0x00 0x400>; + interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 74 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 74 1>; + assigned-clock-parents = <&k3_clks 74 2>; + power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer5: timer@40450000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40450000 0x00 0x400>; + interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 75 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 75 1>, <&k3_clks 310 0>; + assigned-clock-parents = <&k3_clks 75 2>, <&k3_clks 310 1>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer6: timer@40460000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40460000 0x00 0x400>; + interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 76 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 76 1>; + assigned-clock-parents = <&k3_clks 76 2>; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer7: timer@40470000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40470000 0x00 0x400>; + interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 77 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 77 1>, <&k3_clks 311 0>; + assigned-clock-parents = <&k3_clks 77 2>, <&k3_clks 311 1>; + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer8: timer@40480000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40480000 0x00 0x400>; + interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 78 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 78 1>; + assigned-clock-parents = <&k3_clks 78 2>; + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + mcu_timer9: timer@40490000 { + status = "reserved"; + compatible = "ti,am654-timer"; + reg = <0x00 0x40490000 0x00 0x400>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 79 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 79 1>, <&k3_clks 312 0>; + assigned-clock-parents = <&k3_clks 79 2>, <&k3_clks 312 1>; + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + mcu_conf: syscon@40f00000 { compatible = "syscon", "simple-mfd"; reg = <0x00 0x40f00000 0x00 0x20000>; @@ -53,6 +183,26 @@ reg = <0x00 0x43000014 0x00 0x4>; }; + /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ + mcu_timerio_input: pinctrl@40f04200 { + compatible = "pinctrl-single"; + reg = <0x0 0x40f04200 0x0 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000F>; + status = "reserved"; + }; + + /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ + mcu_timerio_output: pinctrl@40f04280 { + compatible = "pinctrl-single"; + reg = <0x0 0x40f04280 0x0 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000F>; + status = "reserved"; + }; + wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ @@ -62,7 +212,7 @@ pinctrl-single,function-mask = <0xffffffff>; }; - wkup_pmx1: pinctrl@0x4301c038 { + wkup_pmx1: pinctrl@4301c038 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c038 0x00 0x8>; @@ -71,7 +221,7 @@ pinctrl-single,function-mask = <0xffffffff>; }; - wkup_pmx2: pinctrl@0x4301c068 { + wkup_pmx2: pinctrl@4301c068 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c068 0x00 0xec>; @@ -80,7 +230,7 @@ pinctrl-single,function-mask = <0xffffffff>; }; - wkup_pmx3: pinctrl@0x4301c174 { + wkup_pmx3: pinctrl@4301c174 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c174 0x00 0x20>; @@ -209,6 +359,21 @@ }; }; + secure_proxy_mcu: mailbox@2a480000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x0 0x2a480000 0x0 0x80000>, + <0x0 0x2a380000 0x0 0x80000>, + <0x0 0x2a400000 0x0 0x80000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + mcu_cpsw: ethernet@46000000 { compatible = "ti,j721e-cpsw-nuss"; #address-cells = <2>; @@ -459,4 +624,12 @@ status = "disabled"; /* Used by OP-TEE */ }; }; + + wkup_vtm0: temperature-sensor@42040000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0x42040000 0x00 0x350>, + <0x00 0x42050000 0x00 0x350>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi index fa44ed4c17d5..b37f4f88ece4 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -83,7 +83,7 @@ }; &wkup_pmx0 { - mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default { + mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */ J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */ @@ -101,7 +101,7 @@ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */ @@ -118,8 +118,17 @@ }; }; +&wkup_pmx2 { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x98, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */ + J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */ + >; + }; +}; + &main_pmx0 { - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ @@ -140,6 +149,37 @@ flash@0,0 { compatible = "cypress,hyperflash", "cfi-flash"; reg = <0x00 0x00 0x4000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "hbmc.tiboot3"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "hbmc.tispl"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "hbmc.u-boot"; + reg = <0x300000 0x400000>; + }; + + partition@700000 { + label = "hbmc.env"; + reg = <0x700000 0x40000>; + }; + + partition@800000 { + label = "hbmc.rootfs"; + reg = <0x800000 0x3800000>; + }; + }; }; }; @@ -174,25 +214,25 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; @@ -214,6 +254,18 @@ }; }; +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + &ospi0 { pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; @@ -229,5 +281,46 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "ospi.tispl"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "ospi.u-boot"; + reg = <0x300000 0x400000>; + }; + + partition@700000 { + label = "ospi.env"; + reg = <0x700000 0x40000>; + }; + + partition@740000 { + label = "ospi.env.backup"; + reg = <0x740000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi new file mode 100644 index 000000000000..e7e3a643a6f0 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +thermal_zones: thermal-zones { + mcu_thermal: mcu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + wkup_crit: wkup-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + mpu_thermal: mpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu_crit: mpu-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main_thermal: main-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + c7x_crit: c7x-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi index bbe380c72a7e..ef73e6d7e858 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi @@ -18,23 +18,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &wkup_uart0; - serial1 = &mcu_uart0; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - serial5 = &main_uart3; - serial6 = &main_uart4; - serial7 = &main_uart5; - serial8 = &main_uart6; - serial9 = &main_uart7; - serial10 = &main_uart8; - serial11 = &main_uart9; - mmc0 = &main_sdhci0; - mmc1 = &main_sdhci1; - }; - chosen { }; cpus { @@ -95,6 +78,7 @@ msmc_l3: l3-cache0 { compatible = "cache"; cache-level = <3>; + cache-unified; }; firmware { @@ -128,6 +112,7 @@ #size-cells = <2>; ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */ <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */ <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ @@ -170,6 +155,8 @@ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */ }; }; + + #include "k3-j7200-thermal.dtsi" }; /* Now include the peripherals for each bus segments */ diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts index 37c24b077b6a..66aac145e753 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts @@ -20,6 +20,7 @@ model = "BeagleBoard.org BeagleBone AI-64"; aliases { + serial0 = &wkup_uart0; serial2 = &main_uart0; mmc0 = &main_sdhci0; mmc1 = &main_sdhci1; @@ -304,7 +305,7 @@ }; &main_pmx0 { - led_pins_default: led-pins-default { + led_pins_default: led-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x184, PIN_INPUT, 7) /* (T23) RGMII5_RD0.GPIO0_96 */ J721E_IOPAD(0x180, PIN_INPUT, 7) /* (R23) RGMII5_RD1.GPIO0_95 */ @@ -314,7 +315,7 @@ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ @@ -327,64 +328,64 @@ >; }; - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ >; }; - sd_pwr_en_pins_default: sd-pwr-en-pins-default { + sd_pwr_en_pins_default: sd-pwr-en-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x14c, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */ >; }; - vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default { + vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 - USBC_DIR */ >; }; - main_usbss1_pins_default: main-usbss1-pins-default { + main_usbss1_pins_default: main-usbss1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x290, INPUT_DISABLE, 1) /* (U6) USB0_DRVVBUS.USB1_DRVVBUS */ >; }; - dp0_3v3_en_pins_default:dp0-3v3-en-pins-default { + dp0_3v3_en_pins_default:dp0-3v3-en-default-pins { pinctrl-single,pins = < J721E_IOPAD(0xc8, PIN_INPUT, 7) /* (AE26) PRG0_PRU0_GPO6.GPIO0_49 */ >; }; - dp0_pins_default: dp0-pins-default { + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* (Y4) SPI0_CS1.DP0_HPD */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ >; }; - main_i2c2_pins_default: main-i2c2-pins-default { + main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x208, PIN_INPUT_PULLUP, 4) /* (W5) MCAN0_RX.I2C2_SCL */ J721E_IOPAD(0x20c, PIN_INPUT_PULLUP, 4) /* (W6) MCAN0_TX.I2C2_SDA */ @@ -393,14 +394,14 @@ >; }; - main_i2c3_pins_default: main-i2c3-pins-default { + main_i2c3_pins_default: main-i2c3-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ >; }; - main_i2c4_pins_default: main-i2c4-pins-default { + main_i2c4_pins_default: main-i2c4-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1e0, PIN_INPUT_PULLUP, 2) /* (Y5) SPI1_D0.I2C4_SCL */ J721E_IOPAD(0x1dc, PIN_INPUT_PULLUP, 2) /* (Y1) SPI1_CLK.I2C4_SDA */ @@ -409,14 +410,14 @@ >; }; - main_i2c5_pins_default: main-i2c5-pins-default { + main_i2c5_pins_default: main-i2c5-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */ J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */ >; }; - main_i2c6_pins_default: main-i2c6-pins-default { + main_i2c6_pins_default: main-i2c6-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */ J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */ @@ -425,21 +426,21 @@ >; }; - csi0_gpio_pins_default: csi0-gpio-pins-default { + csi0_gpio_pins_default: csi0-gpio-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 7) /* (W27) RGMII6_TD0.GPIO0_102 */ J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 7) /* (W29) RGMII6_TXC.GPIO0_103 */ >; }; - csi1_gpio_pins_default: csi1-gpio-pins-default { + csi1_gpio_pins_default: csi1-gpio-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 7) /* (V25) RGMII6_TD1.GPIO0_101 */ J721E_IOPAD(0x1b0, PIN_INPUT_PULLDOWN, 7) /* (W24) RGMII6_RD1.GPIO0_107 */ >; }; - pcie1_rst_pins_default: pcie1-rst-pins-default { + pcie1_rst_pins_default: pcie1-rst-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x5c, PIN_INPUT, 7) /* (AG23) PRG1_PRU1_GPO1.GPIO0_22 */ >; @@ -447,13 +448,13 @@ }; &wkup_pmx0 { - eeprom_wp_pins_default: eeprom-wp-pins-default { + eeprom_wp_pins_default: eeprom-wp-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xc4, PIN_OUTPUT_PULLUP, 7) /* (G24) WKUP_GPIO0_5 */ >; }; - mcu_adc0_pins_default: mcu-adc0-pins-default { + mcu_adc0_pins_default: mcu-adc0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x130, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN0 */ J721E_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (K26) MCU_ADC0_AIN1 */ @@ -465,13 +466,13 @@ >; }; - mcu_adc1_pins_default: mcu-adc1-pins-default { + mcu_adc1_pins_default: mcu-adc1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (N23) MCU_ADC1_AIN0 */ >; }; - mikro_bus_pins_default: mikro-bus-pins-default { + mikro_bus_pins_default: mikro-bus-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x108, PIN_INPUT, 7) /* SDAPULLEN (E26) PMIC_POWER_EN0.WKUP_GPIO0_66 */ J721E_WKUP_IOPAD(0xd4, PIN_INPUT, 7) /* SDA (G26) WKUP_GPIO0_9.MCU_I2C1_SDA */ @@ -494,7 +495,7 @@ >; }; - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */ J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */ @@ -511,27 +512,34 @@ >; }; - mcu_mdio_pins_default: mcu-mdio1-pins-default { + mcu_mdio_pins_default: mcu-mdio1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */ J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */ >; }; - sw_pwr_pins_default: sw-pwr-pins-default { + sw_pwr_pins_default: sw-pwr-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xc0, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_4 */ >; }; - wkup_i2c0_pins_default: wkup-i2c0-pins-default { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; }; - mcu_usbss1_pins_default: mcu-usbss1-pins-default { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ + J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ + >; + }; + + mcu_usbss1_pins_default: mcu-usbss1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x3c, PIN_OUTPUT_PULLUP, 5) /* (A23) MCU_OSPI1_LBCLKO.WKUP_GPIO0_30 */ >; @@ -541,6 +549,8 @@ &wkup_uart0 { /* Wakeup UART is used by TIFS firmware. */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; &main_uart0 { @@ -593,7 +603,7 @@ &main_i2c1 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default &csi1_gpio_pins_default>; + pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; }; @@ -623,7 +633,7 @@ &main_i2c5 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&main_i2c5_pins_default &csi0_gpio_pins_default>; + pinctrl-0 = <&main_i2c5_pins_default>; clock-frequency = <400000>; }; @@ -639,12 +649,14 @@ &wkup_i2c0 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&wkup_i2c0_pins_default &eeprom_wp_pins_default>; + pinctrl-0 = <&wkup_i2c0_pins_default>; clock-frequency = <400000>; eeprom@50 { compatible = "atmel,24c04"; reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&eeprom_wp_pins_default>; }; }; @@ -680,7 +692,8 @@ &wkup_gpio0 { pinctrl-names = "default"; - pinctrl-0 = <&mcu_adc0_pins_default &mcu_adc1_pins_default &mikro_bus_pins_default>; + pinctrl-0 = <&mcu_adc0_pins_default>, <&mcu_adc1_pins_default>, + <&mikro_bus_pins_default>; }; &wkup_gpio1 { @@ -688,6 +701,11 @@ status = "disabled"; }; +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&csi1_gpio_pins_default>, <&csi0_gpio_pins_default>; +}; + &usb_serdes_mux { idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ }; @@ -759,7 +777,7 @@ &usbss1 { pinctrl-names = "default"; - pinctrl-0 = <&main_usbss1_pins_default &mcu_usbss1_pins_default>; + pinctrl-0 = <&main_usbss1_pins_default>, <&mcu_usbss1_pins_default>; ti,vbus-divider; }; @@ -872,12 +890,8 @@ }; }; -&pcie0_rc { - /* Unused */ - status = "disabled"; -}; - &pcie1_rc { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pcie1_rst_pins_default>; phys = <&serdes1_pcie_link>; @@ -887,55 +901,12 @@ reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_HIGH>; }; -&pcie2_rc { - /* Unused */ - status = "disabled"; -}; - -&pcie0_ep { - status = "disabled"; - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <1>; -}; - -&pcie1_ep { - status = "disabled"; - phys = <&serdes1_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <2>; -}; - -&pcie2_ep { - /* Unused */ - status = "disabled"; -}; - -&pcie3_rc { - /* Unused */ - status = "disabled"; -}; - -&pcie3_ep { - /* Unused */ - status = "disabled"; -}; - -&icssg0_mdio { - /* Unused */ - status = "disabled"; -}; - -&icssg1_mdio { - /* Unused */ - status = "disabled"; -}; - &ufs_wrapper { status = "disabled"; }; &mailbox0_cluster0 { + status = "okay"; interrupts = <436>; mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { @@ -950,6 +921,7 @@ }; &mailbox0_cluster1 { + status = "okay"; interrupts = <432>; mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { @@ -964,6 +936,7 @@ }; &mailbox0_cluster2 { + status = "okay"; interrupts = <428>; mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { @@ -978,6 +951,7 @@ }; &mailbox0_cluster3 { + status = "okay"; interrupts = <424>; mbox_c66_0: mbox-c66-0 { @@ -992,6 +966,7 @@ }; &mailbox0_cluster4 { + status = "okay"; interrupts = <420>; mbox_c71_0: mbox-c71-0 { @@ -1001,55 +976,55 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &c66_0 { - mboxes = <&mailbox0_cluster3 &mbox_c66_0>; + mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>; memory-region = <&c66_0_dma_memory_region>, <&c66_0_memory_region>; }; &c66_1 { - mboxes = <&mailbox0_cluster3 &mbox_c66_1>; + mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>; memory-region = <&c66_1_dma_memory_region>, <&c66_1_memory_region>; }; &c71_0 { - mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 7db0603125aa..c1cbbae76182 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -1,6 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ + * + * Product Link: https://www.ti.com/tool/J721EXCPXEVM */ /dts-v1/; @@ -15,16 +17,27 @@ compatible = "ti,j721e-evm", "ti,j721e"; model = "Texas Instruments J721e EVM"; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + serial6 = &main_uart4; + ethernet0 = &cpsw_port1; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; + }; + chosen { stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; }; gpio_keys: gpio-keys { compatible = "gpio-keys"; autorepeat; pinctrl-names = "default"; - pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>; + pinctrl-0 = <&sw10_button_pins_default>, <&sw11_button_pins_default>; sw10: switch-10 { label = "GPIO Key USER1"; @@ -173,13 +186,43 @@ }; &main_pmx0 { - sw10_button_pins_default: sw10-button-pins-default { + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1d4, PIN_INPUT, 1) /* (Y3) SPI1_CS0.UART0_CTSn */ + J721E_IOPAD(0x1c0, PIN_OUTPUT, 1) /* (AA2) SPI0_CS0.UART0_RTSn */ + J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ + J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ + >; + }; + + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */ + J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */ + >; + }; + + main_uart2_pins_default: main-uart2-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1dc, PIN_INPUT, 3) /* (Y1) SPI1_CLK.UART2_RXD */ + J721E_IOPAD(0x1e0, PIN_OUTPUT, 3) /* (Y5) SPI1_D0.UART2_TXD */ + >; + }; + + main_uart4_pins_default: main-uart4-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x190, PIN_INPUT, 1) /* (W23) RGMII6_TD3.UART4_RXD */ + J721E_IOPAD(0x194, PIN_OUTPUT, 1) /* (W28) RGMII6_TD2.UART4_TXD */ + >; + }; + + sw10_button_pins_default: sw10-button-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ @@ -193,66 +236,66 @@ >; }; - vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default { + vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; }; - main_usbss1_pins_default: main-usbss1-pins-default { + main_usbss1_pins_default: main-usbss1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ >; }; - dp0_pins_default: dp0-pins-default { + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ >; }; - main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default { + main_i2c1_exp4_pins_default: main-i2c1-exp4-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ >; }; - main_i2c3_pins_default: main-i2c3-pins-default { + main_i2c3_pins_default: main-i2c3-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ >; }; - main_i2c6_pins_default: main-i2c6-pins-default { + main_i2c6_pins_default: main-i2c6-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */ J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */ >; }; - mcasp10_pins_default: mcasp10-pins-default { + mcasp10_pins_default: mcasp10-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */ J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */ @@ -266,27 +309,27 @@ >; }; - audi_ext_refclk2_pins_default: audi-ext-refclk2-pins-default { + audi_ext_refclk2_pins_default: audi-ext-refclk2-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */ >; }; - main_mcan0_pins_default: main-mcan0-pins-default { + main_mcan0_pins_default: main-mcan0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */ J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */ >; }; - main_mcan2_pins_default: main-mcan2-pins-default { + main_mcan2_pins_default: main-mcan2-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x01f0, PIN_INPUT, 3) /* (AC2) MCAN2_RX.GPIO0_123 */ J721E_IOPAD(0x01f4, PIN_OUTPUT, 3) /* (AB1) MCAN2_TX.GPIO0_124 */ >; }; - main_mcan2_gpio_pins_default: main-mcan2-gpio-pins-default { + main_mcan2_gpio_pins_default: main-mcan2-gpio-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */ >; @@ -294,13 +337,29 @@ }; &wkup_pmx0 { - sw11_button_pins_default: sw11-button-pins-default { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ + J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xe8, PIN_INPUT, 0) /* (H29) WKUP_GPIO0_14.MCU_UART0_CTSn */ + J721E_WKUP_IOPAD(0xec, PIN_OUTPUT, 0) /* (J27) WKUP_GPIO0_15.MCU_UART0_RTSn */ + J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ + J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0) /* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + sw11_button_pins_default: sw11-button-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ >; }; - mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default { + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */ J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */ @@ -313,7 +372,7 @@ >; }; - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ @@ -330,70 +389,84 @@ >; }; - mcu_mdio_pins_default: mcu-mdio1-pins-default { + mcu_mdio_pins_default: mcu-mdio1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */ J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */ >; }; - mcu_mcan0_pins_default: mcu-mcan0-pins-default { + mcu_mcan0_pins_default: mcu-mcan0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */ J721E_WKUP_IOPAD(0xa8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */ >; }; - mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-pins-default { + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* (F26) WKUP_GPIO0_0 */ J721E_WKUP_IOPAD(0x98, PIN_INPUT, 7) /* (E28) MCU_SPI0_D1.WKUP_GPIO0_54 */ >; }; - mcu_mcan1_pins_default: mcu-mcan1-pins-default { + mcu_mcan1_pins_default: mcu-mcan1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xc4, PIN_INPUT, 0) /* (G24) WKUP_GPIO0_5.MCU_MCAN1_RX */ J721E_WKUP_IOPAD(0xc0, PIN_OUTPUT, 0) /* (G25) WKUP_GPIO0_4.MCU_MCAN1_TX */ >; }; - mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-pins-default { + mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* (F28) WKUP_GPIO0_2 */ >; }; + + wkup_gpio_pins_default: wkup-gpio-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_8 */ + >; + }; }; &wkup_uart0 { /* Wakeup UART is used by System firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; &mcu_uart0 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; }; &main_uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; /* Shared with ATF on this platform */ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; }; &main_uart1 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; }; &main_uart2 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&main_uart2_pins_default>; }; &main_uart4 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&main_uart4_pins_default>; }; &main_gpio2 { @@ -420,6 +493,11 @@ status = "disabled"; }; +&wkup_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_gpio_pins_default>; +}; + &wkup_gpio1 { status = "disabled"; }; @@ -513,6 +591,52 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "qspi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "qspi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "qspi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "qspi.env"; + reg = <0x680000 0x20000>; + }; + + partition@6a0000 { + label = "qspi.env.backup"; + reg = <0x6a0000 0x20000>; + }; + + partition@6c0000 { + label = "qspi.sysfw"; + reg = <0x6c0000 0x100000>; + }; + + partition@800000 { + label = "qspi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fe0000 { + label = "qspi.phypattern"; + reg = <0x3fe0000 0x20000>; + }; + }; }; }; @@ -646,7 +770,7 @@ &mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; }; &davinci_mdio { @@ -820,6 +944,7 @@ }; &pcie0_rc { + status = "okay"; reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; phys = <&serdes0_pcie_link>; phy-names = "pcie-phy"; @@ -827,6 +952,7 @@ }; &pcie1_rc { + status = "okay"; reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; phys = <&serdes1_pcie_link>; phy-names = "pcie-phy"; @@ -834,49 +960,13 @@ }; &pcie2_rc { + status = "okay"; reset-gpios = <&exp2 20 GPIO_ACTIVE_HIGH>; phys = <&serdes2_pcie_link>; phy-names = "pcie-phy"; num-lanes = <2>; }; -&pcie0_ep { - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <1>; - status = "disabled"; -}; - -&pcie1_ep { - phys = <&serdes1_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <2>; - status = "disabled"; -}; - -&pcie2_ep { - phys = <&serdes2_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <2>; - status = "disabled"; -}; - -&pcie3_rc { - status = "disabled"; -}; - -&pcie3_ep { - status = "disabled"; -}; - -&icssg0_mdio { - status = "disabled"; -}; - -&icssg1_mdio { - status = "disabled"; -}; - &mcu_mcan0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso index 6ff7b6ad33ed..6f0adf591b98 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso +++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso @@ -94,7 +94,7 @@ }; &main_pmx0 { - mdio0_pins_default: mdio0-pins-default { + mdio0_pins_default: mdio0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1bc, PIN_OUTPUT, 0) /* (V24) MDIO0_MDC */ J721E_IOPAD(0x1b8, PIN_INPUT, 0) /* (V26) MDIO0_MDIO */ diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 10c8a5fb4ee2..2ded1ee1a854 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -548,6 +548,24 @@ pinctrl-single,function-mask = <0xffffffff>; }; + /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */ + main_timerio_input: pinctrl@104200 { + compatible = "pinctrl-single"; + reg = <0x00 0x104200 0x00 0x50>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x00000007>; + }; + + /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */ + main_timerio_output: pinctrl@104280 { + compatible = "pinctrl-single"; + reg = <0x00 0x104280 0x00 0x20>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000001f>; + }; + serdes_wiz0: wiz@5000000 { compatible = "ti,j721e-wiz-16g"; #address-cells = <1>; @@ -814,26 +832,7 @@ ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>, <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>; dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; - }; - - pcie0_ep: pcie-ep@2900000 { - compatible = "ti,j721e-pcie-ep"; - reg = <0x00 0x02900000 0x00 0x1000>, - <0x00 0x02907000 0x00 0x400>, - <0x00 0x0d000000 0x00 0x00800000>, - <0x00 0x10000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - interrupt-names = "link_state"; - interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&scm_conf 0x4070>; - max-link-speed = <3>; - num-lanes = <2>; - power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 239 1>; - clock-names = "fck"; - max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; - dma-coherent; + status = "disabled"; }; pcie1_rc: pcie@2910000 { @@ -862,26 +861,7 @@ ranges = <0x01000000 0x0 0x18001000 0x0 0x18001000 0x0 0x0010000>, <0x02000000 0x0 0x18011000 0x0 0x18011000 0x0 0x7fef000>; dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; - }; - - pcie1_ep: pcie-ep@2910000 { - compatible = "ti,j721e-pcie-ep"; - reg = <0x00 0x02910000 0x00 0x1000>, - <0x00 0x02917000 0x00 0x400>, - <0x00 0x0d800000 0x00 0x00800000>, - <0x00 0x18000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - interrupt-names = "link_state"; - interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; - max-link-speed = <3>; - num-lanes = <2>; - power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 240 1>; - clock-names = "fck"; - max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; - dma-coherent; + status = "disabled"; }; pcie2_rc: pcie@2920000 { @@ -910,26 +890,7 @@ ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>, <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>; dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; - }; - - pcie2_ep: pcie-ep@2920000 { - compatible = "ti,j721e-pcie-ep"; - reg = <0x00 0x02920000 0x00 0x1000>, - <0x00 0x02927000 0x00 0x400>, - <0x00 0x0e000000 0x00 0x00800000>, - <0x44 0x00000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - interrupt-names = "link_state"; - interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&scm_conf 0x4078>; - max-link-speed = <3>; - num-lanes = <2>; - power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 241 1>; - clock-names = "fck"; - max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; - dma-coherent; + status = "disabled"; }; pcie3_rc: pcie@2930000 { @@ -958,28 +919,7 @@ ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>, <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>; dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; - }; - - pcie3_ep: pcie-ep@2930000 { - compatible = "ti,j721e-pcie-ep"; - reg = <0x00 0x02930000 0x00 0x1000>, - <0x00 0x02937000 0x00 0x400>, - <0x00 0x0e800000 0x00 0x00800000>, - <0x44 0x10000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - interrupt-names = "link_state"; - interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&scm_conf 0x407c>; - max-link-speed = <3>; - num-lanes = <2>; - power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 242 1>; - clock-names = "fck"; - max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; - dma-coherent; - #address-cells = <2>; - #size-cells = <2>; + status = "disabled"; }; serdes_wiz4: wiz@5050000 { @@ -1023,6 +963,246 @@ }; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 49 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 49 1>; + assigned-clock-parents = <&k3_clks 49 2>; + power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 50 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 50 1>, <&k3_clks 327 0>; + assigned-clock-parents = <&k3_clks 50 2>, <&k3_clks 327 1>; + power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 51 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 51 1>; + assigned-clock-parents = <&k3_clks 51 2>; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 52 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 52 1>, <&k3_clks 328 0>; + assigned-clock-parents = <&k3_clks 52 2>, <&k3_clks 328 1>; + power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 53 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 53 1>; + assigned-clock-parents = <&k3_clks 53 2>; + power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 54 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 54 1>, <&k3_clks 329 0>; + assigned-clock-parents = <&k3_clks 54 2>, <&k3_clks 329 1>; + power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 55 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 55 1>; + assigned-clock-parents = <&k3_clks 55 2>; + power-domains = <&k3_pds 55 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 57 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 57 1>, <&k3_clks 330 0>; + assigned-clock-parents = <&k3_clks 57 2>, <&k3_clks 330 1>; + power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer8: timer@2480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2480000 0x00 0x400>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 58 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 58 1>; + assigned-clock-parents = <&k3_clks 58 2>; + power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer9: timer@2490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2490000 0x00 0x400>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 59 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 59 1>, <&k3_clks 331 0>; + assigned-clock-parents = <&k3_clks 59 2>, <&k3_clks 331 1>; + power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer10: timer@24a0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24a0000 0x00 0x400>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 60 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 60 1>; + assigned-clock-parents = <&k3_clks 60 2>; + power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer11: timer@24b0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24b0000 0x00 0x400>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 62 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 62 1>, <&k3_clks 332 0>; + assigned-clock-parents = <&k3_clks 62 2>, <&k3_clks 332 1>; + power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer12: timer@24c0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24c0000 0x00 0x400>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 63 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 63 1>; + assigned-clock-parents = <&k3_clks 63 2>; + power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer13: timer@24d0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24d0000 0x00 0x400>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 64 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 64 1>, <&k3_clks 333 0>; + assigned-clock-parents = <&k3_clks 64 2>, <&k3_clks 333 1>; + power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer14: timer@24e0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24e0000 0x00 0x400>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 65 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 65 1>; + assigned-clock-parents = <&k3_clks 65 2>; + power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer15: timer@24f0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24f0000 0x00 0x400>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 66 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 66 1>, <&k3_clks 334 0>; + assigned-clock-parents = <&k3_clks 66 2>, <&k3_clks 334 1>; + power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer16: timer@2500000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2500000 0x00 0x400>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 67 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 67 1>; + assigned-clock-parents = <&k3_clks 67 2>; + power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer17: timer@2510000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2510000 0x00 0x400>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 68 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 68 1>, <&k3_clks 335 0>; + assigned-clock-parents = <&k3_clks 68 2>, <&k3_clks 335 1>; + power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer18: timer@2520000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2520000 0x00 0x400>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 69 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 69 1>; + assigned-clock-parents = <&k3_clks 69 2>; + power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer19: timer@2530000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2530000 0x00 0x400>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 70 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 70 1>, <&k3_clks 336 0>; + assigned-clock-parents = <&k3_clks 70 2>, <&k3_clks 336 1>; + power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; @@ -1287,8 +1467,8 @@ bus-width = <8>; mmc-hs200-1_8v; mmc-ddr-1_8v; - ti,otap-del-sel-legacy = <0xf>; - ti,otap-del-sel-mmc-hs = <0xf>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; ti,otap-del-sel-ddr52 = <0x5>; ti,otap-del-sel-hs200 = <0x6>; ti,otap-del-sel-hs400 = <0x0>; @@ -1309,11 +1489,12 @@ assigned-clocks = <&k3_clks 92 0>; assigned-clock-parents = <&k3_clks 92 1>; ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0xf>; + ti,otap-del-sel-sd-hs = <0x0>; ti,otap-del-sel-sdr12 = <0xf>; ti,otap-del-sel-sdr25 = <0xf>; ti,otap-del-sel-sdr50 = <0xc>; ti,otap-del-sel-ddr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x5>; ti,itap-del-sel-legacy = <0x0>; ti,itap-del-sel-sd-hs = <0x0>; ti,itap-del-sel-sdr12 = <0x0>; @@ -1335,11 +1516,12 @@ assigned-clocks = <&k3_clks 93 0>; assigned-clock-parents = <&k3_clks 93 1>; ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0xf>; + ti,otap-del-sel-sd-hs = <0x0>; ti,otap-del-sel-sdr12 = <0xf>; ti,otap-del-sel-sdr25 = <0xf>; ti,otap-del-sel-sdr50 = <0xc>; ti,otap-del-sel-ddr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x5>; ti,itap-del-sel-legacy = <0x0>; ti,itap-del-sel-sd-hs = <0x0>; ti,itap-del-sel-sdr12 = <0x0>; @@ -2091,6 +2273,7 @@ #address-cells = <1>; #size-cells = <0>; bus_freq = <1000000>; + status = "disabled"; }; }; @@ -2232,6 +2415,7 @@ #address-cells = <1>; #size-cells = <0>; bus_freq = <1000000>; + status = "disabled"; }; }; @@ -2532,4 +2716,10 @@ clocks = <&k3_clks 273 1>; status = "disabled"; }; + + main_esm: esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x700000 0x0 0x1000>; + ti,esm-pins = <344>, <345>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 24e8125db8c4..ea5b9e104491 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -62,6 +62,28 @@ pinctrl-single,function-mask = <0xffffffff>; }; + /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ + mcu_timerio_input: pinctrl@40f04200 { + compatible = "pinctrl-single"; + reg = <0x00 0x40f04200 0x00 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ + mcu_timerio_output: pinctrl@40f04280 { + compatible = "pinctrl-single"; + reg = <0x00 0x40f04280 0x00 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + mcu_ram: sram@41c00000 { compatible = "mmio-sram"; reg = <0x00 0x41c00000 0x00 0x100000>; @@ -70,6 +92,145 @@ #size-cells = <1>; }; + mcu_timer0: timer@40400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40400000 0x00 0x400>; + interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 35 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 35 1>; + assigned-clock-parents = <&k3_clks 35 2>; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer1: timer@40410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40410000 0x00 0x400>; + interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 71 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 71 1>, <&k3_clks 322 0>; + assigned-clock-parents = <&k3_clks 71 2>, <&k3_clks 322 1>; + power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer2: timer@40420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40420000 0x00 0x400>; + interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 72 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 72 1>; + assigned-clock-parents = <&k3_clks 72 2>; + power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer3: timer@40430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40430000 0x00 0x400>; + interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 73 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 73 1>, <&k3_clks 323 0>; + assigned-clock-parents = <&k3_clks 73 2>, <&k3_clks 323 1>; + power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer4: timer@40440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40440000 0x00 0x400>; + interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 74 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 74 1>; + assigned-clock-parents = <&k3_clks 74 2>; + power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer5: timer@40450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40450000 0x00 0x400>; + interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 75 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 75 1>, <&k3_clks 324 0>; + assigned-clock-parents = <&k3_clks 75 2>, <&k3_clks 324 1>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer6: timer@40460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40460000 0x00 0x400>; + interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 76 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 76 1>; + assigned-clock-parents = <&k3_clks 76 2>; + power-domains = <&k3_pds 76 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer7: timer@40470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40470000 0x00 0x400>; + interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 77 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 77 1>, <&k3_clks 325 0>; + assigned-clock-parents = <&k3_clks 77 2>, <&k3_clks 325 1>; + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer8: timer@40480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40480000 0x00 0x400>; + interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 78 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 78 1>; + assigned-clock-parents = <&k3_clks 78 2>; + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer9: timer@40490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40490000 0x00 0x400>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 79 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 79 1>, <&k3_clks 326 0>; + assigned-clock-parents = <&k3_clks 79 2>, <&k3_clks 326 1>; + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; wkup_uart0: serial@42300000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x42300000 0x00 0x100>; @@ -181,6 +342,27 @@ #size-cells = <2>; ranges; + hbmc_mux: mux-controller@47000004 { + compatible = "reg-mux"; + reg = <0x00 0x47000004 0x00 0x2>; + #mux-control-cells = <1>; + mux-reg-masks = <0x4 0x2>; /* HBMC select */ + }; + + hbmc: hyperbus@47034000 { + compatible = "ti,am654-hbmc"; + reg = <0x00 0x47034000 0x00 0x100>, + <0x05 0x00000000 0x01 0x0000000>; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 102 0>; + assigned-clocks = <&k3_clks 102 5>; + assigned-clock-rates = <333333333>; + #address-cells = <2>; + #size-cells = <1>; + mux-controls = <&hbmc_mux 0>; + status = "disabled"; + }; + ospi0: spi@47040000 { compatible = "ti,am654-ospi", "cdns,qspi-nor"; reg = <0x0 0x47040000 0x0 0x100>, @@ -296,6 +478,21 @@ }; }; + secure_proxy_mcu: mailbox@2a480000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x0 0x2a480000 0x0 0x80000>, + <0x0 0x2a380000 0x0 0x80000>, + <0x0 0x2a400000 0x0 0x80000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + mcu_cpsw: ethernet@46000000 { compatible = "ti,j721e-cpsw-nuss"; #address-cells = <2>; @@ -458,4 +655,13 @@ clocks = <&k3_clks 276 0>; status = "disabled"; }; + + wkup_vtm0: temperature-sensor@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x00 0x42040000 0x00 0x350>, + <0x00 0x42050000 0x00 0x350>, + <0x00 0x43000300 0x00 0x10>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index f650a7fd66b4..0ee4f38ec8f0 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -16,9 +16,17 @@ compatible = "ti,j721e-sk", "ti,j721e"; model = "Texas Instruments J721E SK"; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + ethernet0 = &cpsw_port1; + mmc1 = &main_sdhci1; + }; + chosen { stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; }; memory@80000000 { @@ -281,7 +289,7 @@ }; &main_pmx0 { - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ @@ -294,7 +302,7 @@ >; }; - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */ J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */ @@ -303,53 +311,60 @@ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */ + J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ >; }; - main_i2c3_pins_default: main-i2c3-pins-default { + main_i2c3_pins_default: main-i2c3-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; }; - main_usbss1_pins_default: main-usbss1-pins-default { + main_usbss1_pins_default: main-usbss1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ >; }; - dp0_pins_default: dp0-pins-default { + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ >; }; - dp_pwr_en_pins_default: dp-pwr-en-pins-default { + dp_pwr_en_pins_default: dp-pwr-en-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c0, PIN_INPUT, 7) /* (AA2) SPI0_CS0.GPIO0_111 */ >; }; - dss_vout0_pins_default: dss-vout0-pins-default { + dss_vout0_pins_default: dss-vout0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */ J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */ @@ -382,33 +397,33 @@ >; }; - hdmi_hpd_pins_default: hdmi-hpd-pins-default { + hdmi_hpd_pins_default: hdmi-hpd-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x204, PIN_INPUT, 7) /* (AD5) UART1_RTSn.GPIO1_0 */ >; }; - hdmi_pdn_pins_default: hdmi-pdn-pins-default { + hdmi_pdn_pins_default: hdmi-pdn-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */ >; }; /* Reset for M.2 E Key slot on PCIe0 */ - ekey_reset_pins_default: ekey-reset-pns-pins-default { + ekey_reset_pins_default: ekey-reset-pns-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */ >; }; - main_i2c5_pins_default: main-i2c5-pins-default { + main_i2c5_pins_default: main-i2c5-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */ J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */ >; }; - rpi_header_gpio0_pins_default: rpi-header-gpio0-pins-default { + rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x01C, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */ J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */ @@ -436,7 +451,7 @@ >; }; - rpi_header_gpio1_pins_default: rpi-header-gpio1-pins-default { + rpi_header_gpio1_pins_default: rpi-header-gpio1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */ >; @@ -444,7 +459,7 @@ }; &wkup_pmx0 { - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */ J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */ @@ -461,14 +476,14 @@ >; }; - mcu_mdio_pins_default: mcu-mdio1-pins-default { + mcu_mdio_pins_default: mcu-mdio1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */ J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 0) /* (E20) MCU_OSPI0_CLK */ J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 0) /* (F19) MCU_OSPI0_CSn0 */ @@ -484,19 +499,35 @@ >; }; - vdd_mmc1_en_pins_default: vdd-mmc1-en-pins-default { + vdd_mmc1_en_pins_default: vdd-mmc1-en-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xd0, PIN_OUTPUT, 7) /* (G27) WKUP_GPIO0_8 */ >; }; - vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default { + vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */ >; }; - wkup_i2c0_pins_default: wkup-i2c0-pins-default { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ + J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 2) /* (D26) MCU_I3C0_SCL.MCU_UART0_CTSn */ + J721E_WKUP_IOPAD(0xf4, PIN_OUTPUT, 2)/* (D25) MCU_I3C0_SDA.MCU_UART0_RTSn */ + J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ + J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0)/* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ @@ -504,7 +535,7 @@ }; /* Reset for M.2 M Key slot on PCIe1 */ - mkey_reset_pins_default: mkey-reset-pns-pins-default { + mkey_reset_pins_default: mkey-reset-pns-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* (H27) WKUP_GPIO0_11 */ >; @@ -514,11 +545,27 @@ &wkup_uart0 { /* Wakeup UART is used by System firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@51 { + /* AT24C512C-MAHM-T */ + compatible = "atmel,24c512"; + reg = <0x51>; + }; }; &mcu_uart0 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; }; &main_uart0 { @@ -531,7 +578,8 @@ &main_uart1 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; }; &main_sdhci0 { @@ -569,6 +617,52 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "ospi.sysfw"; + reg = <0x6c0000 0x100000>; + }; + + partition@7c0000 { + label = "ospi.env.backup"; + reg = <0x7c0000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; }; }; @@ -781,7 +875,7 @@ &mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; }; &davinci_mdio { @@ -872,6 +966,7 @@ }; &pcie0_rc { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ekey_reset_pins_default>; reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_HIGH>; @@ -882,6 +977,7 @@ }; &pcie1_rc { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mkey_reset_pins_default>; reset-gpios = <&wkup_gpio0 11 GPIO_ACTIVE_HIGH>; @@ -891,48 +987,6 @@ num-lanes = <2>; }; -&pcie2_rc { - /* Unused */ - status = "disabled"; -}; - -&pcie0_ep { - status = "disabled"; - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <1>; -}; - -&pcie1_ep { - status = "disabled"; - phys = <&serdes1_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <2>; -}; - -&pcie2_ep { - /* Unused */ - status = "disabled"; -}; - -&pcie3_rc { - /* Unused */ - status = "disabled"; -}; - -&pcie3_ep { - /* Unused */ - status = "disabled"; -}; - -&icssg0_mdio { - status = "disabled"; -}; - -&icssg1_mdio { - status = "disabled"; -}; - &ufs_wrapper { status = "disabled"; }; @@ -1008,55 +1062,55 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &c66_0 { - mboxes = <&mailbox0_cluster3 &mbox_c66_0>; + mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>; memory-region = <&c66_0_dma_memory_region>, <&c66_0_memory_region>; }; &c66_1 { - mboxes = <&mailbox0_cluster3 &mbox_c66_1>; + mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>; memory-region = <&c66_1_dma_memory_region>, <&c66_1_memory_region>; }; &c71_0 { - mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index e289d5b44356..38ae13cc3aa3 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -1,6 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2019-2020 Texas Instruments Incorporated - https://www.ti.com/ + * + * Product Link: https://www.ti.com/tool/J721EXSOMXEVM */ /dts-v1/; @@ -143,14 +145,14 @@ }; &wkup_pmx0 { - wkup_i2c0_pins_default: wkup-i2c0-pins-default { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */ @@ -165,6 +167,51 @@ J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */ >; }; + + mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_CK */ + J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_CKn */ + J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_CSn0 */ + J721E_WKUP_IOPAD(0x54, PIN_OUTPUT, 3) /* MCU_HYPERBUS0_CSn1 */ + J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_RESETn */ + J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* MCU_HYPERBUS0_RWDS */ + J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ0 */ + J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ1 */ + J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ2 */ + J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ3 */ + J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ4 */ + J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ5 */ + J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ6 */ + J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* MCU_HYPERBUS0_DQ7 */ + >; + }; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + /* CAV24C256WE-GT3 */ + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + /* CAV24C256WE-GT3 */ + compatible = "atmel,24c256"; + reg = <0x50>; + }; }; &ospi0 { @@ -182,6 +229,104 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x20000>; + }; + + partition@6a0000 { + label = "ospi.env.backup"; + reg = <0x6a0000 0x20000>; + }; + + partition@6c0000 { + label = "ospi.sysfw"; + reg = <0x6c0000 0x100000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fe0000 { + label = "ospi.phypattern"; + reg = <0x3fe0000 0x20000>; + }; + }; + }; +}; + +&hbmc { + /* OSPI and HBMC are muxed inside FSS, Bootloader will enable + * appropriate node based on board detection + */ + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_hpb0_pins_default>; + ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */ + <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */ + + flash@0,0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0x00 0x00 0x4000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "hbmc.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "hbmc.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "hbmc.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "hbmc.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "hbmc.sysfw"; + reg = <0x6c0000 0x100000>; + }; + + partition@800000 { + label = "hbmc.rootfs"; + reg = <0x800000 0x3800000>; + }; + }; }; }; @@ -256,55 +401,55 @@ }; &mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; }; &mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; }; &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; &c66_0 { - mboxes = <&mailbox0_cluster3 &mbox_c66_0>; + mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>; memory-region = <&c66_0_dma_memory_region>, <&c66_0_memory_region>; }; &c66_1 { - mboxes = <&mailbox0_cluster3 &mbox_c66_1>; + mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>; memory-region = <&c66_1_dma_memory_region>, <&c66_1_memory_region>; }; &c71_0 { - mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; memory-region = <&c71_0_dma_memory_region>, <&c71_0_memory_region>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi new file mode 100644 index 000000000000..c2523279001b --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +thermal_zones: thermal-zones { + wkup_thermal: wkup-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + wkup_crit: wkup-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + mpu_thermal: mpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu_crit: mpu-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + c7x_thermal: c7x-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + c7x_crit: c7x-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 3>; + + trips { + gpu_crit: gpu-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + r5f_thermal: r5f-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 4>; + + trips { + r5f_crit: r5f-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index b912143b6a11..a200810df54a 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -18,25 +18,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &wkup_uart0; - serial1 = &mcu_uart0; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - serial5 = &main_uart3; - serial6 = &main_uart4; - serial7 = &main_uart5; - serial8 = &main_uart6; - serial9 = &main_uart7; - serial10 = &main_uart8; - serial11 = &main_uart9; - ethernet0 = &cpsw_port1; - mmc0 = &main_sdhci0; - mmc1 = &main_sdhci1; - mmc2 = &main_sdhci2; - }; - chosen { }; cpus { @@ -97,6 +78,7 @@ msmc_l3: l3-cache0 { compatible = "cache"; cache-level = <3>; + cache-unified; }; firmware { @@ -131,6 +113,7 @@ #size-cells = <2>; ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */ <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */ @@ -184,6 +167,8 @@ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ }; }; + + #include "k3-j721e-thermal.dtsi" }; /* Now include the peripherals for each bus segments */ diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index b4b9edfe2d12..2a5000645752 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -9,6 +9,9 @@ #include "k3-j721s2-som-p0.dtsi" #include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/mux/ti-serdes.h> / { compatible = "ti,j721s2-evm", "ti,j721s2"; @@ -16,7 +19,6 @@ chosen { stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,2880000"; }; aliases { @@ -110,7 +112,7 @@ }; &main_pmx0 { - main_uart8_pins_default: main-uart8-pins-default { + main_uart8_pins_default: main-uart8-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x040, PIN_INPUT, 14) /* (AC28) MCASP0_AXR0.UART8_CTSn */ J721S2_IOPAD(0x044, PIN_OUTPUT, 14) /* (Y26) MCASP0_AXR1.UART8_RTSn */ @@ -119,14 +121,14 @@ >; }; - main_i2c3_pins_default: main-i2c3-pins-default { + main_i2c3_pins_default: main-i2c3-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x064, PIN_INPUT_PULLUP, 13) /* (W28) MCAN0_TX.I2C3_SCL */ J721S2_IOPAD(0x060, PIN_INPUT_PULLUP, 13) /* (AC27) MCASP2_AXR1.I2C3_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */ J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */ @@ -139,88 +141,127 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */ >; }; + + main_usbss0_pins_default: main-usbss0-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AG25) TIMER_IO1.USB0_DRVVBUS */ + >; + }; }; -&wkup_pmx0 { - mcu_cpsw_pins_default: mcu-cpsw-pins-default { +&wkup_pmx2 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B24) WKUP_GPIO0_14.MCU_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (D25) WKUP_GPIO0_15.MCU_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */ + J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */ - J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */ - J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */ - J721S2_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */ - J721S2_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */ - J721S2_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */ - J721S2_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */ - J721S2_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */ - J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */ - J721S2_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ - J721S2_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ - J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ + J721S2_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */ + J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */ + J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */ + J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */ + J721S2_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */ + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ + J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ >; }; - mcu_mdio_pins_default: mcu-mdio-pins-default { + mcu_mdio_pins_default: mcu-mdio-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ - J721S2_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ + J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ + J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ >; }; - mcu_mcan0_pins_default: mcu-mcan0-pins-default { + mcu_mcan0_pins_default: mcu-mcan0-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0bc, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */ - J721S2_WKUP_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */ + J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */ + J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */ >; }; - mcu_mcan1_pins_default: mcu-mcan1-pins-default { + mcu_mcan1_pins_default: mcu-mcan1-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */ - J721S2_WKUP_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (C23) WKUP_GPIO0_4.MCU_MCAN1_TX */ + J721S2_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */ + J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /*(C23) WKUP_GPIO0_4.MCU_MCAN1_TX */ >; }; - mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-pins-default { + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0c0, PIN_INPUT, 7) /* (D26) WKUP_GPIO0_0 */ - J721S2_WKUP_IOPAD(0x0a8, PIN_INPUT, 7) /* (B25) MCU_SPI0_D1.WKUP_GPIO0_69 */ + J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (D26) WKUP_GPIO0_0 */ + J721S2_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (B25) MCU_SPI0_D1.WKUP_GPIO0_69 */ >; }; - mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-pins-default { + mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x0c8, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */ + J721S2_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */ >; }; - mcu_adc0_pins_default: mcu-adc0-pins-default { + mcu_adc0_pins_default: mcu-adc0-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (L25) MCU_ADC0_AIN0 */ - J721S2_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN1 */ - J721S2_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (M24) MCU_ADC0_AIN2 */ - J721S2_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (L24) MCU_ADC0_AIN3 */ - J721S2_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (L27) MCU_ADC0_AIN4 */ - J721S2_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN5 */ - J721S2_WKUP_IOPAD(0x14c, PIN_INPUT, 0) /* (M27) MCU_ADC0_AIN6 */ - J721S2_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (M26) MCU_ADC0_AIN7 */ + J721S2_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (L25) MCU_ADC0_AIN0 */ + J721S2_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN1 */ + J721S2_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (M24) MCU_ADC0_AIN2 */ + J721S2_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (L24) MCU_ADC0_AIN3 */ + J721S2_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (L27) MCU_ADC0_AIN4 */ + J721S2_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN5 */ + J721S2_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (M27) MCU_ADC0_AIN6 */ + J721S2_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (M26) MCU_ADC0_AIN7 */ >; }; - mcu_adc1_pins_default: mcu-adc1-pins-default { + mcu_adc1_pins_default: mcu-adc1-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x154, PIN_INPUT, 0) /* (P25) MCU_ADC1_AIN0 */ - J721S2_WKUP_IOPAD(0x158, PIN_INPUT, 0) /* (R25) MCU_ADC1_AIN1 */ - J721S2_WKUP_IOPAD(0x15c, PIN_INPUT, 0) /* (P28) MCU_ADC1_AIN2 */ - J721S2_WKUP_IOPAD(0x160, PIN_INPUT, 0) /* (P27) MCU_ADC1_AIN3 */ - J721S2_WKUP_IOPAD(0x164, PIN_INPUT, 0) /* (N25) MCU_ADC1_AIN4 */ - J721S2_WKUP_IOPAD(0x168, PIN_INPUT, 0) /* (P26) MCU_ADC1_AIN5 */ - J721S2_WKUP_IOPAD(0x16c, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */ - J721S2_WKUP_IOPAD(0x170, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */ + J721S2_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (P25) MCU_ADC1_AIN0 */ + J721S2_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (R25) MCU_ADC1_AIN1 */ + J721S2_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (P28) MCU_ADC1_AIN2 */ + J721S2_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (P27) MCU_ADC1_AIN3 */ + J721S2_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (N25) MCU_ADC1_AIN4 */ + J721S2_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (P26) MCU_ADC1_AIN5 */ + J721S2_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */ + J721S2_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */ + >; + }; +}; + +&wkup_pmx1 { + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */ + J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */ + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */ + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */ + J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */ + J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */ >; }; }; @@ -243,11 +284,14 @@ &wkup_uart0 { status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; &mcu_uart0 { status = "okay"; - /* Default pinmux */ + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; }; &main_uart8 { @@ -305,7 +349,7 @@ &mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; }; &davinci_mdio { @@ -322,6 +366,70 @@ phy-handle = <&phy0>; }; +&serdes_ln_ctrl { + idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_USB>, + <J721S2_SERDES0_LANE2_EDP_LANE2>, <J721S2_SERDES0_LANE3_EDP_LANE3>; +}; + +&serdes_refclk { + clock-frequency = <100000000>; +}; + +&serdes0 { + status = "okay"; + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>; + }; +}; + +&usb_serdes_mux { + idle-states = <1>; /* USB0 to SERDES lane 1 */ +}; + +&usbss0 { + status = "okay"; + pinctrl-0 = <&main_usbss0_pins_default>; + pinctrl-names = "default"; + ti,vbus-divider; + ti,usb2-only; +}; + +&usb0 { + dr_mode = "otg"; + maximum-speed = "high-speed"; +}; + +&ospi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + }; +}; + +&pcie1_rc { + status = "okay"; + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; +}; + &mcu_mcan0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 2dd7865f7654..ed79ab3a3271 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -5,6 +5,17 @@ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy-ti.h> + +/ { + serdes_refclk: clock-cmnrefclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; +}; + &cbass_main { msmc_ram: sram@70000000 { compatible = "mmio-sram"; @@ -26,6 +37,29 @@ }; }; + scm_conf: syscon@104000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00 0x00104000 0x00 0x18000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00104000 0x18000>; + + usb_serdes_mux: mux-controller@0 { + compatible = "mmio-mux"; + reg = <0x0 0x4>; + #mux-control-cells = <1>; + mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ + }; + + serdes_ln_ctrl: mux-controller@80 { + compatible = "mmio-mux"; + reg = <0x80 0x10>; + #mux-control-cells = <1>; + mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */ + <0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */ + }; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; @@ -72,6 +106,24 @@ pinctrl-single,function-mask = <0xffffffff>; }; + /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */ + main_timerio_input: pinctrl@104200 { + compatible = "pinctrl-single"; + reg = <0x00 0x104200 0x00 0x50>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x00000007>; + }; + + /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */ + main_timerio_output: pinctrl@104280 { + compatible = "pinctrl-single"; + reg = <0x00 0x104280 0x00 0x20>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000001f>; + }; + main_crypto: crypto@4e00000 { compatible = "ti,j721e-sa2ul"; reg = <0x00 0x04e00000 0x00 0x1200>; @@ -91,6 +143,246 @@ }; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 63 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 63 1>; + assigned-clock-parents = <&k3_clks 63 2>; + power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 64 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 64 1>; + assigned-clock-parents = <&k3_clks 64 2>; + power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 65 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 65 1>; + assigned-clock-parents = <&k3_clks 65 2>; + power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 66 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 66 1>; + assigned-clock-parents = <&k3_clks 66 2>; + power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 67 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 67 1>; + assigned-clock-parents = <&k3_clks 67 2>; + power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 68 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 68 1>; + assigned-clock-parents = <&k3_clks 68 2>; + power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 69 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 69 1>; + assigned-clock-parents = <&k3_clks 69 2>; + power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 70 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 70 1>; + assigned-clock-parents = <&k3_clks 70 2>; + power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer8: timer@2480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2480000 0x00 0x400>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 71 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 71 1>; + assigned-clock-parents = <&k3_clks 71 2>; + power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer9: timer@2490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2490000 0x00 0x400>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 72 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 72 1>; + assigned-clock-parents = <&k3_clks 72 2>; + power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer10: timer@24a0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24a0000 0x00 0x400>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 73 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 73 1>; + assigned-clock-parents = <&k3_clks 73 2>; + power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer11: timer@24b0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24b0000 0x00 0x400>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 74 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 74 1>; + assigned-clock-parents = <&k3_clks 74 2>; + power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer12: timer@24c0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24c0000 0x00 0x400>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 75 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 75 1>; + assigned-clock-parents = <&k3_clks 75 2>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer13: timer@24d0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24d0000 0x00 0x400>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 76 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 76 1>; + assigned-clock-parents = <&k3_clks 76 2>; + power-domains = <&k3_pds 76 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer14: timer@24e0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24e0000 0x00 0x400>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 77 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 77 1>; + assigned-clock-parents = <&k3_clks 77 2>; + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer15: timer@24f0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24f0000 0x00 0x400>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 78 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 78 1>; + assigned-clock-parents = <&k3_clks 78 2>; + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer16: timer@2500000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2500000 0x00 0x400>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 79 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 79 1>; + assigned-clock-parents = <&k3_clks 79 2>; + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer17: timer@2510000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2510000 0x00 0x400>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 80 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 80 1>; + assigned-clock-parents = <&k3_clks 80 2>; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer18: timer@2520000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2520000 0x00 0x400>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 81 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 81 1>; + assigned-clock-parents = <&k3_clks 81 2>; + power-domains = <&k3_pds 81 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer19: timer@2530000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2530000 0x00 0x400>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 82 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 82 1>; + assigned-clock-parents = <&k3_clks 82 2>; + power-domains = <&k3_pds 82 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x200>; @@ -738,6 +1030,8 @@ reg-names = "cpts"; clocks = <&k3_clks 226 5>; clock-names = "cpts"; + assigned-clocks = <&k3_clks 226 5>; /* NAVSS0_CPTS_0_RCLK */ + assigned-clock-parents = <&k3_clks 226 7>; /* MAIN_0_HSDIVOUT6_CLK */ interrupts-extended = <&main_navss_intr 391>; interrupt-names = "cpts"; ti,cpts-periodic-outputs = <6>; @@ -745,6 +1039,117 @@ }; }; + usbss0: cdns-usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x04104000 0x00 0x100>; + clocks = <&k3_clks 360 16>, <&k3_clks 360 15>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 360 17>; + power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-coherent; + + status = "disabled"; /* Needs pinmux */ + + usb0: usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x06000000 0x00 0x10000>, + <0x00 0x06010000 0x00 0x10000>, + <0x00 0x06020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + serdes_wiz0: wiz@5060000 { + compatible = "ti,j721s2-wiz-10g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 365 0>, <&k3_clks 365 3>, <&serdes_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + num-lanes = <4>; + #reset-cells = <1>; + #clock-cells = <1>; + ranges = <0x5060000 0x0 0x5060000 0x10000>; + + assigned-clocks = <&k3_clks 365 3>; + assigned-clock-parents = <&k3_clks 365 7>; + + serdes0: serdes@5060000 { + compatible = "ti,j721e-serdes-10g"; + reg = <0x05060000 0x00010000>; + reg-names = "torrent_phy"; + resets = <&serdes_wiz0 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>; + clock-names = "refclk", "phy_en_refclk"; + assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz0 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 365 3>, + <&k3_clks 365 3>, + <&k3_clks 365 3>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + status = "disabled"; /* Needs lane config */ + }; + }; + + pcie1_rc: pcie@2910000 { + compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x800000>, + <0x00 0x18000000 0x00 0x1000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&scm_conf 0x074>; + max-link-speed = <3>; + num-lanes = <4>; + power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 276 41>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xff>; + vendor-id = <0x104c>; + device-id = <0xb013>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>, + <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, /* INT A */ + <0 0 0 2 &pcie1_intc 0>, /* INT B */ + <0 0 0 3 &pcie1_intc 0>, /* INT C */ + <0 0 0 4 &pcie1_intc 0>; /* INT D */ + + status = "disabled"; /* Needs gpio and serdes info */ + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>; + }; + }; + main_mcan0: can@2701000 { compatible = "bosch,m_can"; reg = <0x00 0x02701000 0x00 0x200>, diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index a353705a7463..e7dd947a1814 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -39,6 +39,21 @@ reg = <0x00 0x43000014 0x00 0x4>; }; + secure_proxy_sa3: mailbox@43600000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x43600000 0x00 0x10000>, + <0x00 0x44880000 0x00 0x20000>, + <0x00 0x44860000 0x00 0x20000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + mcu_ram: sram@41c00000 { compatible = "mmio-sram"; reg = <0x00 0x41c00000 0x00 0x100000>; @@ -50,12 +65,61 @@ wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ - reg = <0x00 0x4301c000 0x00 0x178>; + reg = <0x00 0x4301c000 0x00 0x034>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; }; + wkup_pmx1: pinctrl@4301c038 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c038 0x00 0x02C>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx2: pinctrl@4301c068 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c068 0x00 0x120>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx3: pinctrl@4301c190 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c190 0x00 0x004>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ + mcu_timerio_input: pinctrl@40f04200 { + compatible = "pinctrl-single"; + reg = <0x00 0x40f04200 0x00 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ + mcu_timerio_output: pinctrl@40f04280 { + compatible = "pinctrl-single"; + reg = <0x00 0x40f04280 0x00 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + wkup_gpio_intr: interrupt-controller@42200000 { compatible = "ti,sci-intr"; reg = <0x00 0x42200000 0x00 0x400>; @@ -83,6 +147,146 @@ }; + mcu_timer0: timer@40400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40400000 0x00 0x400>; + interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 35 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 35 1>; + assigned-clock-parents = <&k3_clks 35 2>; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer1: timer@40410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40410000 0x00 0x400>; + interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 83 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 83 1>; + assigned-clock-parents = <&k3_clks 83 2>; + power-domains = <&k3_pds 83 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer2: timer@40420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40420000 0x00 0x400>; + interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 84 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 84 1>; + assigned-clock-parents = <&k3_clks 84 2>; + power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer3: timer@40430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40430000 0x00 0x400>; + interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 85 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 85 1>; + assigned-clock-parents = <&k3_clks 85 2>; + power-domains = <&k3_pds 85 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer4: timer@40440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40440000 0x00 0x400>; + interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 86 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 86 1>; + assigned-clock-parents = <&k3_clks 86 2>; + power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer5: timer@40450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40450000 0x00 0x400>; + interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 87 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 87 1>; + assigned-clock-parents = <&k3_clks 87 2>; + power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer6: timer@40460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40460000 0x00 0x400>; + interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 88 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 88 1>; + assigned-clock-parents = <&k3_clks 88 2>; + power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer7: timer@40470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40470000 0x00 0x400>; + interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 89 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 89 1>; + assigned-clock-parents = <&k3_clks 89 2>; + power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer8: timer@40480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40480000 0x00 0x400>; + interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 90 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 90 1>; + assigned-clock-parents = <&k3_clks 90 2>; + power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer9: timer@40490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40490000 0x00 0x400>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 91 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 91 1>; + assigned-clock-parents = <&k3_clks 91 2>; + power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + wkup_uart0: serial@42300000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x42300000 0x00 0x200>; @@ -280,6 +484,21 @@ }; }; + secure_proxy_mcu: mailbox@2a480000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x2a480000 0x00 0x80000>, + <0x00 0x2a380000 0x00 0x80000>, + <0x00 0x2a400000 0x00 0x80000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + mcu_cpsw: ethernet@46000000 { compatible = "ti,j721e-cpsw-nuss"; #address-cells = <2>; @@ -333,6 +552,8 @@ reg = <0x0 0x3d000 0x0 0x400>; clocks = <&k3_clks 29 3>; clock-names = "cpts"; + assigned-clocks = <&k3_clks 29 3>; /* CPTS_RFT_CLK */ + assigned-clock-parents = <&k3_clks 29 5>; /* MAIN_0_HSDIVOUT6_CLK */ interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cpts"; ti,cpts-ext-ts-inputs = <4>; @@ -379,4 +600,56 @@ compatible = "ti,am3359-adc"; }; }; + + fss: bus@47000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + + ospi0: spi@47040000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x47040000 0x00 0x100>, + <0x05 0x00000000 0x01 0x00000000>; + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 109 5>; + assigned-clocks = <&k3_clks 109 5>; + assigned-clock-parents = <&k3_clks 109 7>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; /* Needs pinmux */ + }; + + ospi1: spi@47050000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x47050000 0x00 0x100>, + <0x07 0x00000000 0x01 0x00000000>; + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 110 5>; + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; /* Needs pinmux */ + }; + }; + + wkup_vtm0: temperature-sensor@42040000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0x42040000 0x0 0x350>, + <0x00 0x42050000 0x0 0x350>; + power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi index 6930efff8a5a..17ae27eac39a 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -39,15 +39,43 @@ }; }; +&wkup_pmx0 { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */ + J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */ + J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */ + J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */ + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */ + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */ + J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */ + J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E20) MCU_OSPI0_LBCLKO */ + >; + }; +}; + +&wkup_pmx2 { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (H24) WKUP_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (H27) WKUP_I2C0_SDA */ + >; + }; +}; + &main_pmx0 { - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */ J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */ >; }; - main_mcan16_pins_default: main-mcan16-pins-default { + main_mcan16_pins_default: main-mcan16-default-pins { pinctrl-single,pins = < J721S2_IOPAD(0x028, PIN_INPUT, 0) /* (AB24) MCAN16_RX */ J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */ @@ -55,6 +83,19 @@ }; }; +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + /* CAV24C256WE-GT3 */ + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + &main_i2c0 { status = "okay"; pinctrl-names = "default"; @@ -79,3 +120,22 @@ pinctrl-names = "default"; phys = <&transceiver0>; }; + +&ospi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi new file mode 100644 index 000000000000..f7b1a15b8fa0 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +wkup0_thermal: wkup0-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + wkup0_crit: wkup0-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +wkup1_thermal: wkup1-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + wkup1_crit: wkup1-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + main0_crit: main0-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 3>; + + trips { + main1_crit: main1-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main2_thermal: main2-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 4>; + + trips { + main2_crit: main2-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main3_thermal: main3-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 5>; + + trips { + main3_crit: main3-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main4_thermal: main4-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 6>; + + trips { + main4_crit: main4-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi index 376924726f1f..1f636acd4eee 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J721S2 SoC Family * - * TRM (SPRUJ28 – NOVEMBER 2021) : http://www.ti.com/lit/pdf/spruj28 + * TRM (SPRUJ28 NOVEMBER 2021): https://www.ti.com/lit/pdf/spruj28 * * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ * @@ -81,6 +81,7 @@ msmc_l3: l3-cache0 { compatible = "cache"; cache-level = <3>; + cache-unified; }; firmware { @@ -163,6 +164,10 @@ }; }; + + thermal_zones: thermal-zones { + #include "k3-j721s2-thermal.dtsi" + }; }; /* Now include peripherals from each bus segment */ diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index f33815953e77..bf772f064117 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -20,10 +20,13 @@ }; aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; serial2 = &main_uart8; mmc0 = &main_sdhci0; mmc1 = &main_sdhci1; - i2c0 = &main_i2c0; + i2c0 = &wkup_i2c0; + i2c3 = &main_i2c0; }; memory@80000000 { @@ -42,6 +45,150 @@ reg = <0x00 0x9e800000 0x00 0x01800000>; no-map; }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6000000 0x00 0x100000>; + no-map; + }; + + main_r5fss2_core0_memory_region: r5f-memory@a6100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7000000 0x00 0x100000>; + no-map; + }; + + main_r5fss2_core1_memory_region: r5f-memory@a7100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7100000 0x00 0xf00000>; + no-map; + }; + + c71_0_dma_memory_region: c71-dma-memory@a8000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a8100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8100000 0x00 0xf00000>; + no-map; + }; + + c71_1_dma_memory_region: c71-dma-memory@a9000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa9000000 0x00 0x100000>; + no-map; + }; + + c71_1_memory_region: c71-memory@a9100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa9100000 0x00 0xf00000>; + no-map; + }; + + c71_2_dma_memory_region: c71-dma-memory@aa000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xaa000000 0x00 0x100000>; + no-map; + }; + + c71_2_memory_region: c71-memory@aa100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xaa100000 0x00 0xf00000>; + no-map; + }; + + c71_3_dma_memory_region: c71-dma-memory@ab000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xab000000 0x00 0x100000>; + no-map; + }; + + c71_3_memory_region: c71-memory@ab100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xab100000 0x00 0xf00000>; + no-map; + }; }; evm_12v0: regulator-evm12v0 { @@ -105,7 +252,7 @@ }; &main_pmx0 { - main_uart8_pins_default: main-uart8-pins-default { + main_uart8_pins_default: main-uart8-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */ J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */ @@ -114,14 +261,14 @@ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */ J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ @@ -134,45 +281,287 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */ >; }; }; +&wkup_pmx2 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */ + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (H37) WKUP_GPIO0_14.MCU_UART0_CTSn */ + J784S4_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (K37) WKUP_GPIO0_15.MCU_UART0_RTSn */ + J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */ + J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + mcu_cpsw_pins_default: mcu-cpsw-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ + J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ + J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ + J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ + J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ + J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ + J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ + J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ + >; + }; + + mcu_adc0_pins_default: mcu-adc0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */ + J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */ + J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */ + J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */ + J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */ + J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */ + J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */ + J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */ + >; + }; + + mcu_adc1_pins_default: mcu-adc1-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */ + J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */ + J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */ + J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */ + J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */ + J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */ + J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */ + J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */ + >; + }; +}; + &wkup_pmx0 { - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ + J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */ + J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */ + J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ + >; + }; +}; + +&wkup_pmx1 { + mcu_fss0_ospi0_1_pins_default: mcu-fss0-ospi0-1-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ - J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ - J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ - J784S4_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ - J784S4_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ - J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ - J784S4_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ - J784S4_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ - J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ - J784S4_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ - J784S4_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ - J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ + J784S4_WKUP_IOPAD(0x004, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_ECC_FAIL */ + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_RESET_OUT0 */ >; }; - mcu_mdio_pins_default: mcu-mdio-pins-default { + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ - J784S4_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ + J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (F32) MCU_OSPI1_CLK */ + J784S4_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (G32) MCU_OSPI1_CSn0 */ + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (E35) MCU_OSPI1_D0 */ + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (D31) MCU_OSPI1_D1 */ + J784S4_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (G31) MCU_OSPI1_D2 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (F33) MCU_OSPI1_D3 */ + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F31) MCU_OSPI1_DQS */ + J784S4_WKUP_IOPAD(0x00C, PIN_INPUT, 0) /* (C31) MCU_OSPI1_LBCLKO */ >; }; }; +&wkup_uart0 { + /* Firmware usage */ + status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; +}; + +&wkup_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + /* CAV24C256WE-GT3 */ + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + +&mcu_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; +}; + &main_uart8 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart8_pins_default>; }; +&fss { + status = "okay"; +}; + +&ospi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "ospi.env.backup"; + reg = <0x6c0000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; + }; +}; + +&ospi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "qspi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "qspi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "qspi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "qspi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "qspi.env.backup"; + reg = <0x6c0000 0x40000>; + }; + + partition@800000 { + label = "qspi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "qspi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; + + }; +}; + &main_i2c0 { status = "okay"; pinctrl-names = "default"; @@ -253,3 +642,195 @@ phy-mode = "rgmii-rxid"; phy-handle = <&mcu_phy0>; }; + +&mailbox0_cluster0 { + status = "okay"; + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + status = "okay"; + interrupts = <432>; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "okay"; + interrupts = <428>; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster3 { + status = "okay"; + interrupts = <424>; + + mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + status = "okay"; + interrupts = <420>; + + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_1: mbox-c71-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster5 { + status = "okay"; + interrupts = <416>; + + mbox_c71_2: mbox-c71-2 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_3: mbox-c71-3 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mcu_r5fss0_core0 { + status = "okay"; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + status = "okay"; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&main_r5fss0_core0 { + status = "okay"; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + status = "okay"; + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + status = "okay"; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + status = "okay"; + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +&main_r5fss2_core0 { + status = "okay"; + mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>; + memory-region = <&main_r5fss2_core0_dma_memory_region>, + <&main_r5fss2_core0_memory_region>; +}; + +&main_r5fss2_core1 { + status = "okay"; + mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>; + memory-region = <&main_r5fss2_core1_dma_memory_region>, + <&main_r5fss2_core1_memory_region>; +}; + +&c71_0 { + status = "okay"; + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; +}; + +&c71_1 { + status = "okay"; + mboxes = <&mailbox0_cluster4 &mbox_c71_1>; + memory-region = <&c71_1_dma_memory_region>, + <&c71_1_memory_region>; +}; + +&c71_2 { + status = "okay"; + mboxes = <&mailbox0_cluster5 &mbox_c71_2>; + memory-region = <&c71_2_dma_memory_region>, + <&c71_2_memory_region>; +}; + +&c71_3 { + status = "okay"; + mboxes = <&mailbox0_cluster5 &mbox_c71_3>; + memory-region = <&c71_3_dma_memory_region>, + <&c71_3_memory_region>; +}; + +&tscadc0 { + pinctrl-0 = <&mcu_adc0_pins_default>; + pinctrl-names = "default"; + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + pinctrl-0 = <&mcu_adc1_pins_default>; + pinctrl-names = "default"; + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index e9169eb358c1..76e610d8782b 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -60,7 +60,7 @@ #interrupt-cells = <1>; ti,sci = <&sms>; ti,sci-dev-id = <10>; - ti,interrupt-ranges = <8 360 56>; + ti,interrupt-ranges = <8 392 56>; }; main_pmx0: pinctrl@11c000 { @@ -72,6 +72,24 @@ pinctrl-single,function-mask = <0xffffffff>; }; + /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */ + main_timerio_input: pinctrl@104200 { + compatible = "pinctrl-single"; + reg = <0x00 0x104200 0x00 0x50>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x00000007>; + }; + + /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */ + main_timerio_output: pinctrl@104280 { + compatible = "pinctrl-single"; + reg = <0x00 0x104280 0x00 0x20>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000001f>; + }; + main_crypto: crypto@4e00000 { compatible = "ti,j721e-sa2ul"; reg = <0x00 0x4e00000 0x00 0x1200>; @@ -91,6 +109,246 @@ }; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 97 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 97 2>; + assigned-clock-parents = <&k3_clks 97 3>; + power-domains = <&k3_pds 97 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 98 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 98 2>; + assigned-clock-parents = <&k3_clks 98 3>; + power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 99 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 99 2>; + assigned-clock-parents = <&k3_clks 99 3>; + power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 100 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 100 2>; + assigned-clock-parents = <&k3_clks 100 3>; + power-domains = <&k3_pds 100 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 101 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 101 2>; + assigned-clock-parents = <&k3_clks 101 3>; + power-domains = <&k3_pds 101 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 102 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 102 2>; + assigned-clock-parents = <&k3_clks 102 3>; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 103 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 103 2>; + assigned-clock-parents = <&k3_clks 103 3>; + power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 104 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 104 2>; + assigned-clock-parents = <&k3_clks 104 3>; + power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer8: timer@2480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2480000 0x00 0x400>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 105 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 105 2>; + assigned-clock-parents = <&k3_clks 105 3>; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer9: timer@2490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2490000 0x00 0x400>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 106 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 106 2>; + assigned-clock-parents = <&k3_clks 106 3>; + power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer10: timer@24a0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24a0000 0x00 0x400>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 107 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 107 2>; + assigned-clock-parents = <&k3_clks 107 3>; + power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer11: timer@24b0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24b0000 0x00 0x400>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 108 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 108 2>; + assigned-clock-parents = <&k3_clks 108 3>; + power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer12: timer@24c0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24c0000 0x00 0x400>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 109 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 109 2>; + assigned-clock-parents = <&k3_clks 109 3>; + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer13: timer@24d0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24d0000 0x00 0x400>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 110 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 110 2>; + assigned-clock-parents = <&k3_clks 110 3>; + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer14: timer@24e0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24e0000 0x00 0x400>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 111 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 111 2>; + assigned-clock-parents = <&k3_clks 111 3>; + power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer15: timer@24f0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24f0000 0x00 0x400>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 112 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 112 2>; + assigned-clock-parents = <&k3_clks 112 3>; + power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer16: timer@2500000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2500000 0x00 0x400>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 113 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 113 2>; + assigned-clock-parents = <&k3_clks 113 3>; + power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer17: timer@2510000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2510000 0x00 0x400>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 114 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 114 2>; + assigned-clock-parents = <&k3_clks 114 3>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer18: timer@2520000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2520000 0x00 0x400>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 115 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 115 2>; + assigned-clock-parents = <&k3_clks 115 3>; + power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer19: timer@2530000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2530000 0x00 0x400>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 116 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 116 2>; + assigned-clock-parents = <&k3_clks 116 3>; + power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x200>; @@ -378,7 +636,6 @@ mmc-hs200-1_8v; mmc-hs400-1_8v; dma-coherent; - no-1-8-v; status = "disabled"; }; @@ -1112,4 +1369,172 @@ clocks = <&k3_clks 383 1>; status = "disabled"; }; + + main_r5fss0: r5fss@5c00000 { + compatible = "ti,j721s2-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5c00000 0x00 0x5c00000 0x20000>, + <0x5d00000 0x00 0x5d00000 0x20000>; + power-domains = <&k3_pds 336 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss0_core0: r5f@5c00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5c00000 0x00010000>, + <0x5c10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <339>; + ti,sci-proc-ids = <0x06 0xff>; + resets = <&k3_reset 339 1>; + firmware-name = "j784s4-main-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss0_core1: r5f@5d00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5d00000 0x00010000>, + <0x5d10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <340>; + ti,sci-proc-ids = <0x07 0xff>; + resets = <&k3_reset 340 1>; + firmware-name = "j784s4-main-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + main_r5fss1: r5fss@5e00000 { + compatible = "ti,j721s2-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5e00000 0x00 0x5e00000 0x20000>, + <0x5f00000 0x00 0x5f00000 0x20000>; + power-domains = <&k3_pds 337 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss1_core0: r5f@5e00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5e00000 0x00010000>, + <0x5e10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <341>; + ti,sci-proc-ids = <0x08 0xff>; + resets = <&k3_reset 341 1>; + firmware-name = "j784s4-main-r5f1_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss1_core1: r5f@5f00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5f00000 0x00010000>, + <0x5f10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <342>; + ti,sci-proc-ids = <0x09 0xff>; + resets = <&k3_reset 342 1>; + firmware-name = "j784s4-main-r5f1_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + main_r5fss2: r5fss@5900000 { + compatible = "ti,j721s2-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5900000 0x00 0x5900000 0x20000>, + <0x5a00000 0x00 0x5a00000 0x20000>; + power-domains = <&k3_pds 338 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss2_core0: r5f@5900000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5900000 0x00010000>, + <0x5910000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <343>; + ti,sci-proc-ids = <0x0a 0xff>; + resets = <&k3_reset 343 1>; + firmware-name = "j784s4-main-r5f2_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss2_core1: r5f@5a00000 { + compatible = "ti,j721s2-r5f"; + reg = <0x5a00000 0x00010000>, + <0x5a10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <344>; + ti,sci-proc-ids = <0x0b 0xff>; + resets = <&k3_reset 344 1>; + firmware-name = "j784s4-main-r5f2_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + c71_0: dsp@64800000 { + compatible = "ti,j721s2-c71-dsp"; + reg = <0x00 0x64800000 0x00 0x00080000>, + <0x00 0x64e00000 0x00 0x0000c000>; + reg-names = "l2sram", "l1dram"; + ti,sci = <&sms>; + ti,sci-dev-id = <30>; + ti,sci-proc-ids = <0x30 0xff>; + resets = <&k3_reset 30 1>; + firmware-name = "j784s4-c71_0-fw"; + }; + + c71_1: dsp@65800000 { + compatible = "ti,j721s2-c71-dsp"; + reg = <0x00 0x65800000 0x00 0x00080000>, + <0x00 0x65e00000 0x00 0x0000c000>; + reg-names = "l2sram", "l1dram"; + ti,sci = <&sms>; + ti,sci-dev-id = <33>; + ti,sci-proc-ids = <0x31 0xff>; + resets = <&k3_reset 33 1>; + firmware-name = "j784s4-c71_1-fw"; + }; + + c71_2: dsp@66800000 { + compatible = "ti,j721s2-c71-dsp"; + reg = <0x00 0x66800000 0x00 0x00080000>, + <0x00 0x66e00000 0x00 0x0000c000>; + reg-names = "l2sram", "l1dram"; + ti,sci = <&sms>; + ti,sci-dev-id = <37>; + ti,sci-proc-ids = <0x32 0xff>; + resets = <&k3_reset 37 1>; + firmware-name = "j784s4-c71_2-fw"; + }; + + c71_3: dsp@67800000 { + compatible = "ti,j721s2-c71-dsp"; + reg = <0x00 0x67800000 0x00 0x00080000>, + <0x00 0x67e00000 0x00 0x0000c000>; + reg-names = "l2sram", "l1dram"; + ti,sci = <&sms>; + ti,sci-dev-id = <40>; + ti,sci-proc-ids = <0x33 0xff>; + resets = <&k3_reset 40 1>; + firmware-name = "j784s4-c71_3-fw"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi index f04fcb614cbe..62a0f172fb2d 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -39,6 +39,21 @@ reg = <0x00 0x43000014 0x00 0x4>; }; + secure_proxy_sa3: mailbox@43600000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x43600000 0x00 0x10000>, + <0x00 0x44880000 0x00 0x20000>, + <0x00 0x44860000 0x00 0x20000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + mcu_ram: sram@41c00000 { compatible = "mmio-sram"; reg = <0x00 0x41c00000 0x00 0x100000>; @@ -50,7 +65,34 @@ wkup_pmx0: pinctrl@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ - reg = <0x00 0x4301c000 0x00 0x178>; + reg = <0x00 0x4301c000 0x00 0x034>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx1: pinctrl@4301c038 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c038 0x00 0x02c>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx2: pinctrl@4301c068 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c068 0x00 0x120>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + wkup_pmx3: pinctrl@4301c190 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c190 0x00 0x004>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; @@ -65,7 +107,29 @@ #interrupt-cells = <1>; ti,sci = <&sms>; ti,sci-dev-id = <177>; - ti,interrupt-ranges = <16 928 16>; + ti,interrupt-ranges = <16 960 16>; + }; + + /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ + mcu_timerio_input: pinctrl@40f04200 { + compatible = "pinctrl-single"; + reg = <0x00 0x40f04200 0x00 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ + mcu_timerio_output: pinctrl@40f04280 { + compatible = "pinctrl-single"; + reg = <0x00 0x40f04280 0x00 0x28>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + /* Non-MPU Firmware usage */ + status = "reserved"; }; mcu_conf: syscon@40f00000 { @@ -82,6 +146,146 @@ }; }; + mcu_timer0: timer@40400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40400000 0x00 0x400>; + interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 35 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 35 2>; + assigned-clock-parents = <&k3_clks 35 3>; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer1: timer@40410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40410000 0x00 0x400>; + interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 117 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 117 2>; + assigned-clock-parents = <&k3_clks 117 3>; + power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer2: timer@40420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40420000 0x00 0x400>; + interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 118 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 118 2>; + assigned-clock-parents = <&k3_clks 118 3>; + power-domains = <&k3_pds 118 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer3: timer@40430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40430000 0x00 0x400>; + interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 119 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 119 2>; + assigned-clock-parents = <&k3_clks 119 3>; + power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer4: timer@40440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40440000 0x00 0x400>; + interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 120 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 120 2>; + assigned-clock-parents = <&k3_clks 120 3>; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer5: timer@40450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40450000 0x00 0x400>; + interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 121 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 121 2>; + assigned-clock-parents = <&k3_clks 121 3>; + power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer6: timer@40460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40460000 0x00 0x400>; + interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 122 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 122 2>; + assigned-clock-parents = <&k3_clks 122 3>; + power-domains = <&k3_pds 122 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer7: timer@40470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40470000 0x00 0x400>; + interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 123 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 123 2>; + assigned-clock-parents = <&k3_clks 123 3>; + power-domains = <&k3_pds 123 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer8: timer@40480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40480000 0x00 0x400>; + interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 124 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 124 2>; + assigned-clock-parents = <&k3_clks 124 3>; + power-domains = <&k3_pds 124 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + + mcu_timer9: timer@40490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40490000 0x00 0x400>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 125 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 125 2>; + assigned-clock-parents = <&k3_clks 125 3>; + power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + /* Non-MPU Firmware usage */ + status = "reserved"; + }; + wkup_uart0: serial@42300000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x42300000 0x00 0x200>; @@ -280,6 +484,21 @@ }; }; + secure_proxy_mcu: mailbox@2a480000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x2a480000 0x00 0x80000>, + <0x00 0x2a380000 0x00 0x80000>, + <0x00 0x2a400000 0x00 0x80000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + mcu_cpsw: ethernet@46000000 { compatible = "ti,j721e-cpsw-nuss"; #address-cells = <2>; @@ -342,4 +561,133 @@ ti,cpts-periodic-outputs = <2>; }; }; + + mcu_r5fss0: r5fss@41000000 { + compatible = "ti,j721s2-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x41000000 0x00 0x41000000 0x20000>, + <0x41400000 0x00 0x41400000 0x20000>; + power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>; + + mcu_r5fss0_core0: r5f@41000000 { + compatible = "ti,j721s2-r5f"; + reg = <0x41000000 0x00010000>, + <0x41010000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <346>; + ti,sci-proc-ids = <0x01 0xff>; + resets = <&k3_reset 346 1>; + firmware-name = "j784s4-mcu-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + mcu_r5fss0_core1: r5f@41400000 { + compatible = "ti,j721s2-r5f"; + reg = <0x41400000 0x00010000>, + <0x41410000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&sms>; + ti,sci-dev-id = <347>; + ti,sci-proc-ids = <0x02 0xff>; + resets = <&k3_reset 347 1>; + firmware-name = "j784s4-mcu-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + wkup_vtm0: temperature-sensor@42040000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0x42040000 0x00 0x350>, + <0x00 0x42050000 0x00 0x350>; + power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>; + #thermal-sensor-cells = <1>; + }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40200000 0x00 0x1000>; + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 0>; + assigned-clocks = <&k3_clks 0 2>; + assigned-clock-rates = <60000000>; + clock-names = "fck"; + dmas = <&main_udmap 0x7400>, + <&main_udmap 0x7401>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + tscadc1: tscadc@40210000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40210000 0x00 0x1000>; + interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 1 0>; + assigned-clocks = <&k3_clks 1 2>; + assigned-clock-rates = <60000000>; + clock-names = "fck"; + dmas = <&main_udmap 0x7402>, + <&main_udmap 0x7403>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + fss: bus@47000000 { + compatible = "simple-bus"; + reg = <0x00 0x47000000 0x00 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@47040000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x47040000 0x00 0x100>, + <0x05 0x0000000 0x01 0x0000000>; + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 161 7>; + assigned-clocks = <&k3_clks 161 7>; + assigned-clock-parents = <&k3_clks 161 9>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ospi1: spi@47050000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x47050000 0x00 0x100>, + <0x07 0x0000000 0x01 0x0000000>; + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 162 7>; + power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi new file mode 100644 index 000000000000..f7b1a15b8fa0 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +wkup0_thermal: wkup0-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + wkup0_crit: wkup0-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +wkup1_thermal: wkup1-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + wkup1_crit: wkup1-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + main0_crit: main0-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 3>; + + trips { + main1_crit: main1-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main2_thermal: main2-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 4>; + + trips { + main2_crit: main2-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main3_thermal: main3-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 5>; + + trips { + main3_crit: main3-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +main4_thermal: main4-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 6>; + + trips { + main4_crit: main4-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi index 2e03d84da7d2..8b5974d92e33 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J784S4 SoC Family * - * TRM (SPRUJ43 JULY 2022) : http://www.ti.com/lit/zip/spruj52 + * TRM (SPRUJ43 JULY 2022): https://www.ti.com/lit/zip/spruj52 * * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ * @@ -281,6 +281,10 @@ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ }; }; + + thermal_zones: thermal-zones { + #include "k3-j784s4-thermal.dtsi" + }; }; /* Now include peripherals from each bus segment */ |