diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom')
283 files changed, 55906 insertions, 9710 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d7669a7cee9f..d42c59572ace 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -3,12 +3,17 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-gplus-fl8005a.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb @@ -18,9 +23,22 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-gt510.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-gt58.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5x.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-tissot.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-vince.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb @@ -33,12 +51,14 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-oneplus3.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-oneplus3t.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-natrium.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996pro-xiaomi-natrium.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996pro-xiaomi-scorpio.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb @@ -49,11 +69,19 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-dumpling.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-lilac.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb @@ -62,9 +90,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r4.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r0.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r1.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb @@ -79,14 +105,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-ti.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel360-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel360-wifi.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb @@ -95,8 +119,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0-lte.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb @@ -104,43 +126,59 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd-pro.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-nvme.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-nvme-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm450-motorola-ali.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm632-fairphone-fp3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm632-motorola-ocean.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm670-google-sargo.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c-navigation-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyln.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-samsung-starqltechn.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akari.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akatsuki.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-apollo.dtb -dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-ebbg.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-tianma.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb @@ -151,6 +189,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb @@ -159,3 +199,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 1b613098fb4a..59860a2223b8 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -169,10 +169,6 @@ }; }; -&blsp_dma { - status = "okay"; -}; - &blsp_i2c2 { /* On Low speed expansion */ status = "okay"; @@ -329,12 +325,6 @@ linux,code = <KEY_VOLUMEDOWN>; }; -&pronto { - status = "okay"; - - firmware-name = "qcom/apq8016/wcnss.mbn"; -}; - &sdhc_1 { status = "okay"; @@ -415,10 +405,19 @@ qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; +&wcnss { + status = "okay"; + firmware-name = "qcom/apq8016/wcnss.mbn"; +}; + &wcnss_ctrl { firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; }; +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + /* Enable CoreSight */ &cti0 { status = "okay"; }; &cti1 { status = "okay"; }; @@ -718,23 +717,22 @@ "USR_LED_2_CTRL", /* GPIO 120 */ "SB_HS_ID"; - msmgpio_leds: msmgpio-leds { + msmgpio_leds: msmgpio-leds-state { pins = "gpio21", "gpio120"; function = "gpio"; output-low; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio121"; function = "gpio"; drive-strength = <8>; - input-enable; bias-pull-up; }; - adv7533_int_active: adv533-int-active { + adv7533_int_active: adv533-int-active-state { pins = "gpio31"; function = "gpio"; @@ -742,7 +740,7 @@ bias-disable; }; - adv7533_int_suspend: adv7533-int-suspend { + adv7533_int_suspend: adv7533-int-suspend-state { pins = "gpio31"; function = "gpio"; @@ -750,7 +748,7 @@ bias-disable; }; - adv7533_switch_active: adv7533-switch-active { + adv7533_switch_active: adv7533-switch-active-state { pins = "gpio32"; function = "gpio"; @@ -758,7 +756,7 @@ bias-disable; }; - adv7533_switch_suspend: adv7533-switch-suspend { + adv7533_switch_suspend: adv7533-switch-suspend-state { pins = "gpio32"; function = "gpio"; @@ -766,12 +764,11 @@ bias-disable; }; - msm_key_volp_n_default: msm-key-volp-n-default { + msm_key_volp_n_default: msm-key-volp-n-default-state { pins = "gpio107"; function = "gpio"; drive-strength = <8>; - input-enable; bias-pull-up; }; }; @@ -839,7 +836,7 @@ function = "digital"; output-low; - power-source = <PM8916_MPP_L5>; // 1.8V + power-source = <PM8916_MPP_L5>; /* 1.8V */ }; pm8916_mpps_leds: pm8916-mpps-state { diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 5cdc7ac1a9c0..b599909c4463 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -63,7 +63,6 @@ }; clocks { - compatible = "simple-bus"; divclk4: divclk4 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -146,7 +145,6 @@ &blsp1_spi1 { /* On Low speed expansion */ - label = "LS-SPI0"; status = "okay"; }; @@ -183,7 +181,6 @@ &blsp2_spi6 { /* On High speed expansion */ - label = "HS-SPI1"; status = "okay"; }; @@ -422,82 +419,46 @@ "NC", /* GPIO_148 */ "NC"; /* GPIO_149 */ - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; + sdc2_cd_on: sdc2-cd-on-state { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; }; - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; + sdc2_cd_off: sdc2-cd-off-state { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; }; - hdmi_hpd_active: hdmi_hpd_active { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <16>; - }; + hdmi_hpd_active: hdmi-hpd-active-state { + pins = "gpio34"; + function = "hdmi_hot"; + bias-pull-down; + drive-strength = <16>; }; - hdmi_hpd_suspend: hdmi_hpd_suspend { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <2>; - }; + hdmi_hpd_suspend: hdmi-hpd-suspend-state { + pins = "gpio34"; + function = "hdmi_hot"; + bias-pull-down; + drive-strength = <2>; }; - hdmi_ddc_active: hdmi_ddc_active { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-up; - }; + hdmi_ddc_active: hdmi-ddc-active-state { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + drive-strength = <2>; + bias-pull-up; }; - hdmi_ddc_suspend: hdmi_ddc_suspend { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-down; - }; + hdmi_ddc_suspend: hdmi-ddc-suspend-state { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + drive-strength = <2>; + bias-pull-down; }; }; @@ -560,7 +521,7 @@ pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; output-low; - power-source = <2>; // PM8994_GPIO_S4, 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; @@ -569,7 +530,7 @@ pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; bias-pull-down; }; @@ -580,7 +541,7 @@ pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; bias-pull-down; }; @@ -590,7 +551,7 @@ pinconf { pins = "gpio15"; function = "func1"; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; @@ -602,7 +563,7 @@ drive-push-pull; bias-pull-up; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; @@ -623,7 +584,7 @@ input-enable; bias-pull-down; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; }; @@ -679,7 +640,7 @@ input-enable; bias-pull-down; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; }; @@ -742,8 +703,7 @@ &pmi8994_spmi_regulators { vdd_s2-supply = <&vph_pwr>; - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; + vdd_gfx: s2 { regulator-name = "VDD_GFX"; regulator-min-microvolt = <980000>; regulator-max-microvolt = <980000>; @@ -751,7 +711,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -963,7 +923,7 @@ }; }; - pmi8994-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -1010,6 +970,50 @@ }; }; +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "DB820c"; @@ -1062,7 +1066,7 @@ platform { sound-dai = <&q6routing>; - }; + }; codec { sound-dai = <&wcd9335 AIF4_PB>; @@ -1131,21 +1135,8 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - }; &venus { status = "okay"; }; - -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index 92f264891d84..71e0a500599c 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -104,65 +104,27 @@ status = "okay"; }; -&tlmm { - sdc2_pins_default: sdc2-pins-default { - clk { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; +&sdc2_state_on { + cd-pins { + pins = "gpio38"; + function = "gpio"; - cd { - pins = "gpio38"; - function = "gpio"; - - bias-pull-up; - drive-strength = <16>; - }; + bias-pull-up; + drive-strength = <16>; }; +}; - sdc2_pins_sleep: sdc2-pins-sleep { - clk { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <2>; - }; - - cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <2>; - }; - - cd { - pins = "gpio38"; - function = "gpio"; - bias-pull-up; - drive-strength = <2>; - }; +&sdc2_state_off { + cd-pins { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; }; }; &rpm_requests { - pm8994-regulators { + regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -372,10 +334,6 @@ vmmc-supply = <&vreg_l21a_2p95>; vqmmc-supply = <&vreg_l13a_2p95>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_pins_default>; - pinctrl-1 = <&sdc2_pins_sleep>; }; &ufshc { diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts new file mode 100644 index 000000000000..3af1d5556950 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 AP-MI01.2 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.2"; + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts new file mode 100644 index 000000000000..3b6a5cb8bf07 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 RDP468 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6"; + compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + spi_0_data_clk_pins: spi-0-data-clk-state { + pins = "gpio14", "gpio15", "gpio16"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-down; + }; + + spi_0_cs_pins: spi-0-cs-state { + pins = "gpio17"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi new file mode 100644 index 000000000000..af4d97143bcf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,apss-ipq.h> +#include <dt-bindings/clock/qcom,ipq5332-gcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq5332", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-1488000000 { + opp-hz = /bits/ 64 <1488000000>; + clock-latency-ns = <200000>; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_mem: tz@4a600000 { + reg = <0x0 0x4a600000 0x0 0x200000>; + no-map; + }; + + smem@4a800000 { + compatible = "qcom,smem"; + reg = <0x0 0x4a800000 0x0 0x00100000>; + no-map; + + hwlocks = <&tcsr_mutex 0>; + }; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + rng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5332-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 53>; + interrupt-controller; + #interrupt-cells = <2>; + + serial_0_pins: serial0-state { + pins = "gpio18", "gpio19"; + function = "blsp0_uart0"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq5332-gcc"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&xo_board>, + <&sleep_clk>, + <0>, + <0>, + <0>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq5332", "syscon"; + reg = <0x01937000 0x21000>; + }; + + sdhc: mmc@7804000 { + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; + + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1d000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_spi0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c1: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi2: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00000000 0xffd>; + msi-controller; + }; + + v2m1: v2m@1000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00001000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00002000 0xffd>; + msi-controller; + }; + }; + + watchdog: watchdog@b017000 { + compatible = "qcom,apss-wdt-ipq5332", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + timeout-sec = <30>; + }; + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq5332-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a53pll>, <&xo_board>; + clock-names = "pll", "xo"; + #mbox-cells = <1>; + }; + + a53pll: clock@b116000 { + compatible = "qcom,ipq5332-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b120000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index 1ba2eca33c7b..f5f4827c0e17 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -19,7 +19,6 @@ chosen { stdout-path = "serial0:115200n8"; - bootargs-append = " swiotlb=1"; }; }; @@ -36,7 +35,8 @@ }; &blsp1_spi1 { - cs-select = <0>; + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; status = "okay"; flash@0 { @@ -49,13 +49,13 @@ }; &tlmm { - i2c_1_pins: i2c-1-pins { + i2c_1_pins: i2c-1-state { pins = "gpio42", "gpio43"; function = "blsp2_i2c"; drive-strength = <8>; }; - spi_0_pins: spi-0-pins { + spi_0_pins: spi-0-state { pins = "gpio38", "gpio39", "gpio40", "gpio41"; function = "blsp0_spi"; drive-strength = <8>; @@ -80,9 +80,9 @@ }; &qusb_phy_1 { - status = "ok"; + status = "okay"; }; &usb2 { - status = "ok"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index a7c7ca980a71..f531797f2619 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -83,7 +83,14 @@ L2_0: l2-cache { compatible = "cache"; - cache-level = <0x2>; + cache-level = <2>; + cache-unified; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq6018", "qcom,scm"; }; }; @@ -96,26 +103,31 @@ opp-microvolt = <725000>; clock-latency-ns = <200000>; }; + opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-microvolt = <787500>; clock-latency-ns = <200000>; }; + opp-1320000000 { opp-hz = /bits/ 64 <1320000000>; opp-microvolt = <862500>; clock-latency-ns = <200000>; }; + opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; opp-microvolt = <925000>; clock-latency-ns = <200000>; }; + opp-1608000000 { opp-hz = /bits/ 64 <1608000000>; opp-microvolt = <987500>; clock-latency-ns = <200000>; }; + opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1062500>; @@ -123,16 +135,9 @@ }; }; - firmware { - scm { - compatible = "qcom,scm-ipq6018", "qcom,scm"; - }; - }; - pmuv8: pmu { compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; psci: psci { @@ -146,7 +151,7 @@ ranges; rpm_msg_ram: memory@60000 { - reg = <0x0 0x60000 0x0 0x6000>; + reg = <0x0 0x00060000 0x0 0x6000>; no-map; }; @@ -166,6 +171,28 @@ }; }; + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-ipq6018"; + qcom,glink-channels = "rpm_requests"; + + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq6018_s2: s2 { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1062500>; + regulator-always-on; + }; + }; + }; + }; + smem { compatible = "qcom,smem"; memory-region = <&smem_region>; @@ -179,9 +206,105 @@ dma-ranges; compatible = "simple-bus"; + qusb_phy_1: qusb@59000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x00059000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_1_PHY_BCR>; + status = "disabled"; + }; + + ssphy_0: ssphy@78000 { + compatible = "qcom,ipq6018-qmp-usb3-phy"; + reg = <0x0 0x00078000 0x0 0x1c4>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB0_AUX_CLK>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb0_ssphy: phy@78200 { + reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ + <0x0 0x00078400 0x0 0x200>, /* Rx */ + <0x0 0x00078800 0x0 0x1f8>, /* PCS */ + <0x0 0x00078600 0x0 0x044>; /* PCS misc */ + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; + }; + }; + + qusb_phy_0: qusb@79000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x00079000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + status = "disabled"; + }; + + pcie_phy: phy@84000 { + compatible = "qcom,ipq6018-qmp-pcie-phy"; + reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */ + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; + + pcie_phy0: phy@84200 { + reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */ + <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */ + <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */ + <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */ + #phy-cells = <0>; + + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_pcie0_pipe_clk_src"; + #clock-cells = <0>; + }; + }; + + mdio: mdio@90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio"; + reg = <0x0 0x00090000 0x0 0x64>; + clocks = <&gcc GCC_MDIO_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + status = "disabled"; + }; + prng: qrng@e1000 { compatible = "qcom,prng-ee"; - reg = <0x0 0xe3000 0x0 0x1000>; + reg = <0x0 0x000e3000 0x0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; @@ -201,8 +324,8 @@ compatible = "qcom,crypto-v5.1"; reg = <0x0 0x0073a000 0x0 0x6000>; clocks = <&gcc GCC_CRYPTO_AHB_CLK>, - <&gcc GCC_CRYPTO_AXI_CLK>, - <&gcc GCC_CRYPTO_CLK>; + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; clock-names = "iface", "bus", "core"; dmas = <&cryptobam 2>, <&cryptobam 3>; dma-names = "rx", "tx"; @@ -218,14 +341,14 @@ interrupt-controller; #interrupt-cells = <2>; - serial_3_pins: serial3-pinmux { + serial_3_pins: serial3-state { pins = "gpio44", "gpio45"; function = "blsp2_uart"; drive-strength = <8>; bias-pull-down; }; - qpic_pins: qpic-pins { + qpic_pins: qpic-state { pins = "gpio1", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", "gpio8", "gpio10", "gpio11", @@ -257,6 +380,41 @@ reg = <0x0 0x01937000 0x0 0x21000>; }; + usb2: usb@70f8800 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x070f8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_SLEEP_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + clock-names = "core", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <24000000>; + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + + dwc_1: usb@7000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x07000000 0x0 0xcd00>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_1>; + phy-names = "usb2-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07884000 0x0 0x2b000>; @@ -272,7 +430,7 @@ reg = <0x0 0x078b1000 0x0 0x200>; interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; + <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; }; @@ -285,7 +443,7 @@ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; + <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 12>, <&blsp_dma 13>; dma-names = "tx", "rx"; @@ -300,7 +458,7 @@ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; + <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; @@ -348,7 +506,7 @@ status = "disabled"; }; - qpic_nand: nand@79b0000 { + qpic_nand: nand-controller@79b0000 { compatible = "qcom,ipq6018-nand"; reg = <0x0 0x079b0000 0x0 0x10000>; #address-cells = <1>; @@ -358,24 +516,67 @@ clock-names = "core", "aon"; dmas = <&qpic_bam 0>, - <&qpic_bam 1>, - <&qpic_bam 2>; + <&qpic_bam 1>, + <&qpic_bam 2>; dma-names = "tx", "rx", "cmd"; pinctrl-0 = <&qpic_pins>; pinctrl-names = "default"; status = "disabled"; }; + usb3: usb@8af8800 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x08af8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <20000000>; + + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + + dwc_0: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x08a00000 0x0 0xcd00>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_0>, <&usb0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + clocks = <&xo>; + clock-names = "ref"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; #address-cells = <2>; #size-cells = <2>; interrupt-controller; #interrupt-cells = <0x3>; - reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/ - <0x0 0x0b002000 0x0 0x1000>, /*GICC*/ - <0x0 0x0b001000 0x0 0x1000>, /*GICH*/ - <0x0 0x0b004000 0x0 0x1000>; /*GICV*/ + reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/ + <0x0 0x0b002000 0x0 0x1000>, /*GICC*/ + <0x0 0x0b001000 0x0 0x1000>, /*GICH*/ + <0x0 0x0b004000 0x0 0x1000>; /*GICV*/ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; ranges = <0 0 0 0xb00a000 0 0xffd>; @@ -386,106 +587,6 @@ }; }; - pcie_phy: phy@84000 { - compatible = "qcom,ipq6018-qmp-pcie-phy"; - reg = <0x0 0x84000 0x0 0x1bc>; /* Serdes PLL */ - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_PCIE0_AUX_CLK>, - <&gcc GCC_PCIE0_AHB_CLK>; - clock-names = "aux", "cfg_ahb"; - - resets = <&gcc GCC_PCIE0_PHY_BCR>, - <&gcc GCC_PCIE0PHY_PHY_BCR>; - reset-names = "phy", - "common"; - - pcie_phy0: phy@84200 { - reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */ - <0x0 0x84400 0x0 0x200>, /* Serdes Rx */ - <0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */ - #phy-cells = <0>; - - clocks = <&gcc GCC_PCIE0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "gcc_pcie0_pipe_clk_src"; - #clock-cells = <0>; - }; - }; - - pcie0: pci@20000000 { - compatible = "qcom,pcie-ipq6018"; - reg = <0x0 0x20000000 0x0 0xf1d>, - <0x0 0x20000f20 0x0 0xa8>, - <0x0 0x20001000 0x0 0x1000>, - <0x0 0x80000 0x0 0x4000>, - <0x0 0x20100000 0x0 0x1000>; - reg-names = "dbi", "elbi", "atu", "parf", "config"; - - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - max-link-speed = <3>; - #address-cells = <3>; - #size-cells = <2>; - - phys = <&pcie_phy0>; - phy-names = "pciephy"; - - ranges = <0x81000000 0 0x20200000 0 0x20200000 - 0 0x10000>, /* downstream I/O */ - <0x82000000 0 0x20220000 0 0x20220000 - 0 0xfde0000>; /* non-prefetchable memory */ - - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 75 - IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 78 - IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 79 - IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 83 - IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, - <&gcc GCC_PCIE0_AXI_M_CLK>, - <&gcc GCC_PCIE0_AXI_S_CLK>, - <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, - <&gcc PCIE0_RCHNG_CLK>; - clock-names = "iface", - "axi_m", - "axi_s", - "axi_bridge", - "rchng"; - - resets = <&gcc GCC_PCIE0_PIPE_ARES>, - <&gcc GCC_PCIE0_SLEEP_ARES>, - <&gcc GCC_PCIE0_CORE_STICKY_ARES>, - <&gcc GCC_PCIE0_AXI_MASTER_ARES>, - <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, - <&gcc GCC_PCIE0_AHB_ARES>, - <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, - <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; - reset-names = "pipe", - "sleep", - "sticky", - "axi_m", - "axi_s", - "ahb", - "axi_m_sticky", - "axi_s_sticky"; - - status = "disabled"; - }; - watchdog@b017000 { compatible = "qcom,kpss-wdt"; interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; @@ -511,14 +612,6 @@ clock-names = "xo"; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - timer@b120000 { #address-cells = <1>; #size-cells = <1>; @@ -626,148 +719,77 @@ }; }; - mdio: mdio@90000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio"; - reg = <0x0 0x90000 0x0 0x64>; - clocks = <&gcc GCC_MDIO_AHB_CLK>; - clock-names = "gcc_mdio_ahb_clk"; - status = "disabled"; - }; - - qusb_phy_1: qusb@59000 { - compatible = "qcom,ipq6018-qusb2-phy"; - reg = <0x0 0x059000 0x0 0x180>; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, - <&xo>; - clock-names = "cfg_ahb", "ref"; - - resets = <&gcc GCC_QUSB2_1_PHY_BCR>; - status = "disabled"; - }; + pcie0: pci@20000000 { + compatible = "qcom,pcie-ipq6018"; + reg = <0x0 0x20000000 0x0 0xf1d>, + <0x0 0x20000f20 0x0 0xa8>, + <0x0 0x20001000 0x0 0x1000>, + <0x0 0x80000 0x0 0x4000>, + <0x0 0x20100000 0x0 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; - usb2: usb@70f8800 { - compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; - reg = <0x0 0x070F8800 0x0 0x400>; - #address-cells = <2>; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + max-link-speed = <3>; + #address-cells = <3>; #size-cells = <2>; - ranges; - clocks = <&gcc GCC_USB1_MASTER_CLK>, - <&gcc GCC_USB1_SLEEP_CLK>, - <&gcc GCC_USB1_MOCK_UTMI_CLK>; - clock-names = "core", - "sleep", - "mock_utmi"; - assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>, - <&gcc GCC_USB1_MOCK_UTMI_CLK>; - assigned-clock-rates = <133330000>, - <24000000>; - resets = <&gcc GCC_USB1_BCR>; - status = "disabled"; - - dwc_1: usb@7000000 { - compatible = "snps,dwc3"; - reg = <0x0 0x7000000 0x0 0xcd00>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - phys = <&qusb_phy_1>; - phy-names = "usb2-phy"; - tx-fifo-resize; - snps,is-utmi-l1-suspend; - snps,hird-threshold = /bits/ 8 <0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_u3_susphy_quirk; - dr_mode = "host"; - }; - }; + phys = <&pcie_phy0>; + phy-names = "pciephy"; - ssphy_0: ssphy@78000 { - compatible = "qcom,ipq6018-qmp-usb3-phy"; - reg = <0x0 0x78000 0x0 0x1C4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>, + <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>; - clocks = <&gcc GCC_USB0_AUX_CLK>, - <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; - clock-names = "aux", "cfg_ahb", "ref"; - - resets = <&gcc GCC_USB0_PHY_BCR>, - <&gcc GCC_USB3PHY_0_PHY_BCR>; - reset-names = "phy","common"; - status = "disabled"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; - usb0_ssphy: phy@78200 { - reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ - <0x0 0x00078400 0x0 0x200>, /* Rx */ - <0x0 0x00078800 0x0 0x1F8>, /* PCS */ - <0x0 0x00078600 0x0 0x044>; /* PCS misc */ - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "gcc_usb0_pipe_clk_src"; - }; - }; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - qusb_phy_0: qusb@79000 { - compatible = "qcom,ipq6018-qusb2-phy"; - reg = <0x0 0x079000 0x0 0x180>; - #phy-cells = <0>; + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc PCIE0_RCHNG_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "axi_bridge", + "rchng"; - clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, - <&xo>; - clock-names = "cfg_ahb", "ref"; + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky", + "axi_s_sticky"; - resets = <&gcc GCC_QUSB2_0_PHY_BCR>; status = "disabled"; }; + }; - usb3: usb@8af8800 { - compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; - reg = <0x0 0x8AF8800 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, - <&gcc GCC_USB0_MASTER_CLK>, - <&gcc GCC_USB0_SLEEP_CLK>, - <&gcc GCC_USB0_MOCK_UTMI_CLK>; - clock-names = "cfg_noc", - "core", - "sleep", - "mock_utmi"; - - assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, - <&gcc GCC_USB0_MASTER_CLK>, - <&gcc GCC_USB0_MOCK_UTMI_CLK>; - assigned-clock-rates = <133330000>, - <133330000>, - <20000000>; - - resets = <&gcc GCC_USB0_BCR>; - status = "disabled"; - - dwc_0: usb@8a00000 { - compatible = "snps,dwc3"; - reg = <0x0 0x8A00000 0x0 0xcd00>; - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - phys = <&qusb_phy_0>, <&usb0_ssphy>; - phy-names = "usb2-phy", "usb3-phy"; - clocks = <&xo>; - clock-names = "ref"; - tx-fifo-resize; - snps,is-utmi-l1-suspend; - snps,hird-threshold = /bits/ 8 <0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_u3_susphy_quirk; - dr_mode = "host"; - }; - }; + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; wcss: wcss-smp2p { @@ -793,26 +815,4 @@ #interrupt-cells = <2>; }; }; - - rpm-glink { - compatible = "qcom,glink-rpm"; - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - mboxes = <&apcs_glb 0>; - - rpm_requests: glink-channel { - compatible = "qcom,rpm-ipq6018"; - qcom,glink-channels = "rpm_requests"; - - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq6018_s2: s2 { - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1062500>; - regulator-always-on; - }; - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index 7143c936de61..5cf07caf4103 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -1,8 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -/* Copyright (c) 2017, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. */ #include "ipq8074.dtsi" +#include "pmp8074.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; @@ -51,19 +54,19 @@ &pcie0 { status = "okay"; - perst-gpios = <&tlmm 61 0x1>; + perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; }; &pcie1 { status = "okay"; - perst-gpios = <&tlmm 58 0x1>; + perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; -&pcie_phy0 { +&pcie_qmp0 { status = "okay"; }; -&pcie_phy1 { +&pcie_qmp1 { status = "okay"; }; @@ -84,6 +87,7 @@ &sdhc_1 { status = "okay"; + vqmmc-supply = <&l11>; }; &qusb_phy_0 { diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts index 2bfcf42aeabc..cc1992ca0519 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2020 The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts index 7da39f1d979b..d7f0efda6b8e 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -/* Copyright (c) 2020 The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. */ #include "ipq8074-hk10.dtsi" diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi index db4b87944cdf..1b8379ba87f9 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi @@ -5,6 +5,7 @@ /dts-v1/; #include "ipq8074.dtsi" +#include <dt-bindings/gpio/gpio.h> / { aliases { @@ -22,7 +23,7 @@ }; &blsp1_spi1 { - status = "ok"; + status = "okay"; flash@0 { #address-cells = <1>; @@ -34,33 +35,33 @@ }; &blsp1_uart5 { - status = "ok"; + status = "okay"; }; &pcie0 { - status = "ok"; - perst-gpios = <&tlmm 58 0x1>; + status = "okay"; + perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; &pcie1 { - status = "ok"; - perst-gpios = <&tlmm 61 0x1>; + status = "okay"; + perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; }; -&pcie_phy0 { - status = "ok"; +&pcie_qmp0 { + status = "okay"; }; -&pcie_phy1 { - status = "ok"; +&pcie_qmp1 { + status = "okay"; }; &qpic_bam { - status = "ok"; + status = "okay"; }; &qpic_nand { - status = "ok"; + status = "okay"; nand@0 { reg = <0>; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index a47acf9bdf24..5b2c1986c8f4 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -66,7 +66,8 @@ L2_0: l2-cache { compatible = "cache"; - cache-level = <0x2>; + cache-level = <2>; + cache-unified; }; }; @@ -129,15 +130,15 @@ status = "disabled"; usb1_ssphy: phy@58200 { - reg = <0x00058200 0x130>, /* Tx */ + reg = <0x00058200 0x130>, /* Tx */ <0x00058400 0x200>, /* Rx */ - <0x00058800 0x1f8>, /* PCS */ - <0x00058600 0x044>; /* PCS misc*/ + <0x00058800 0x1f8>, /* PCS */ + <0x00058600 0x044>; /* PCS misc */ #phy-cells = <0>; #clock-cells = <0>; clocks = <&gcc GCC_USB1_PIPE_CLK>; clock-names = "pipe0"; - clock-output-names = "gcc_usb1_pipe_clk_src"; + clock-output-names = "usb3phy_1_cc_pipe_clk"; }; }; @@ -172,15 +173,15 @@ status = "disabled"; usb0_ssphy: phy@78200 { - reg = <0x00078200 0x130>, /* Tx */ + reg = <0x00078200 0x130>, /* Tx */ <0x00078400 0x200>, /* Rx */ - <0x00078800 0x1f8>, /* PCS */ - <0x00078600 0x044>; /* PCS misc*/ + <0x00078800 0x1f8>, /* PCS */ + <0x00078600 0x044>; /* PCS misc */ #phy-cells = <0>; #clock-cells = <0>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; - clock-output-names = "gcc_usb0_pipe_clk_src"; + clock-output-names = "usb3phy_0_cc_pipe_clk"; }; }; @@ -197,9 +198,9 @@ status = "disabled"; }; - pcie_qmp0: phy@86000 { - compatible = "qcom,ipq8074-qmp-pcie-phy"; - reg = <0x00086000 0x1c4>; + pcie_qmp0: phy@84000 { + compatible = "qcom,ipq8074-qmp-gen3-pcie-phy"; + reg = <0x00084000 0x1bc>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -213,15 +214,16 @@ "common"; status = "disabled"; - pcie_phy0: phy@86200 { - reg = <0x86200 0x16c>, - <0x86400 0x200>, - <0x86800 0x4f4>; + pcie_phy0: phy@84200 { + reg = <0x84200 0x16c>, + <0x84400 0x200>, + <0x84800 0x1f0>, + <0x84c00 0xf4>; #phy-cells = <0>; #clock-cells = <0>; clocks = <&gcc GCC_PCIE0_PIPE_CLK>; clock-names = "pipe0"; - clock-output-names = "pcie_0_pipe_clk"; + clock-output-names = "pcie20_phy0_pipe_clk"; }; }; @@ -242,19 +244,19 @@ status = "disabled"; pcie_phy1: phy@8e200 { - reg = <0x8e200 0x16c>, + reg = <0x8e200 0x130>, <0x8e400 0x200>, - <0x8e800 0x4f4>; + <0x8e800 0x1f8>; #phy-cells = <0>; #clock-cells = <0>; clocks = <&gcc GCC_PCIE1_PIPE_CLK>; clock-names = "pipe0"; - clock-output-names = "pcie_1_pipe_clk"; + clock-output-names = "pcie20_phy1_pipe_clk"; }; }; mdio: mdio@90000 { - compatible = "qcom,ipq4019-mdio"; + compatible = "qcom,ipq8074-mdio", "qcom,ipq4019-mdio"; reg = <0x00090000 0x64>; #address-cells = <1>; #size-cells = <0>; @@ -265,6 +267,13 @@ status = "disabled"; }; + qfprom: efuse@a4000 { + compatible = "qcom,ipq8074-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + }; + prng: rng@e3000 { compatible = "qcom,prng-ee"; reg = <0x000e3000 0x1000>; @@ -273,6 +282,16 @@ status = "disabled"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq8074-tsens"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; + }; + cryptobam: dma-controller@704000 { compatible = "qcom,bam-v1.7.0"; reg = <0x00704000 0x20000>; @@ -307,35 +326,35 @@ interrupt-controller; #interrupt-cells = <0x2>; - serial_4_pins: serial4-pinmux { + serial_4_pins: serial4-state { pins = "gpio23", "gpio24"; function = "blsp4_uart1"; drive-strength = <8>; bias-disable; }; - i2c_0_pins: i2c-0-pinmux { + i2c_0_pins: i2c-0-state { pins = "gpio42", "gpio43"; function = "blsp1_i2c"; drive-strength = <8>; bias-disable; }; - spi_0_pins: spi-0-pins { + spi_0_pins: spi-0-state { pins = "gpio38", "gpio39", "gpio40", "gpio41"; function = "blsp0_spi"; drive-strength = <8>; bias-disable; }; - hsuart_pins: hsuart-pins { + hsuart_pins: hsuart-state { pins = "gpio46", "gpio47", "gpio48", "gpio49"; function = "blsp2_uart"; drive-strength = <8>; bias-disable; }; - qpic_pins: qpic-pins { + qpic_pins: qpic-state { pins = "gpio1", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", "gpio8", "gpio10", "gpio11", @@ -350,9 +369,11 @@ gcc: gcc@1800000 { compatible = "qcom,gcc-ipq8074"; reg = <0x01800000 0x80000>; - #clock-cells = <0x1>; + clocks = <&xo>, <&sleep_clk>; + clock-names = "xo", "sleep_clk"; + #clock-cells = <1>; #power-domain-cells = <1>; - #reset-cells = <0x1>; + #reset-cells = <1>; }; tcsr_mutex: hwlock@1905000 { @@ -377,7 +398,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sdhc_1: mmc@7824900 { @@ -667,13 +687,24 @@ }; apcs_glb: mailbox@b111000 { - compatible = "qcom,ipq8074-apcs-apps-global"; - reg = <0x0b111000 0x6000>; + compatible = "qcom,ipq8074-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + clocks = <&a53pll>, <&xo>; + clock-names = "pll", "xo"; #clock-cells = <1>; #mbox-cells = <1>; }; + a53pll: clock@b116000 { + compatible = "qcom,ipq8074-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo>; + clock-names = "xo"; + }; + timer@b120000 { #address-cells = <1>; #size-cells = <1>; @@ -743,16 +774,15 @@ linux,pci-domain = <1>; bus-range = <0x00 0xff>; num-lanes = <1>; + max-link-speed = <2>; #address-cells = <3>; #size-cells = <2>; phys = <&pcie_phy1>; phy-names = "pciephy"; - ranges = <0x81000000 0 0x10200000 0x10200000 - 0 0x100000 /* downstream I/O */ - 0x82000000 0 0x10300000 0x10300000 - 0 0xd00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -795,26 +825,26 @@ }; pcie0: pci@20000000 { - compatible = "qcom,pcie-ipq8074"; + compatible = "qcom,pcie-ipq8074-gen3"; reg = <0x20000000 0xf1d>, <0x20000f20 0xa8>, - <0x00080000 0x2000>, + <0x20001000 0x1000>, + <0x00080000 0x4000>, <0x20100000 0x1000>; - reg-names = "dbi", "elbi", "parf", "config"; + reg-names = "dbi", "elbi", "atu", "parf", "config"; device_type = "pci"; linux,pci-domain = <0>; bus-range = <0x00 0xff>; num-lanes = <1>; + max-link-speed = <3>; #address-cells = <3>; #size-cells = <2>; phys = <&pcie_phy0>; phy-names = "pciephy"; - ranges = <0x81000000 0 0x20200000 0x20200000 - 0 0x100000 /* downstream I/O */ - 0x82000000 0 0x20300000 0x20300000 - 0 0xd00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -832,28 +862,30 @@ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, <&gcc GCC_PCIE0_AXI_M_CLK>, <&gcc GCC_PCIE0_AXI_S_CLK>, - <&gcc GCC_PCIE0_AHB_CLK>, - <&gcc GCC_PCIE0_AUX_CLK>; - + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE0_RCHNG_CLK>; clock-names = "iface", "axi_m", "axi_s", - "ahb", - "aux"; + "axi_bridge", + "rchng"; + resets = <&gcc GCC_PCIE0_PIPE_ARES>, <&gcc GCC_PCIE0_SLEEP_ARES>, <&gcc GCC_PCIE0_CORE_STICKY_ARES>, <&gcc GCC_PCIE0_AXI_MASTER_ARES>, <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, <&gcc GCC_PCIE0_AHB_ARES>, - <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>; + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; reset-names = "pipe", "sleep", "sticky", "axi_m", "axi_s", "ahb", - "axi_m_sticky"; + "axi_m_sticky", + "axi_s_sticky"; status = "disabled"; }; }; @@ -865,4 +897,90 @@ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + + thermal-zones { + nss-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + }; + + nss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + }; + + nss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + }; + + wcss-phya0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + }; + + wcss-phya1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + }; + + cpu0_thermal: cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + }; + + cpu1_thermal: cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + }; + + cpu2_thermal: cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 11>; + }; + + cpu3_thermal: cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 12>; + }; + + cluster_thermal: cluster-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 13>; + }; + + wcss-phyb0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 14>; + }; + + wcss-phyb1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 15>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file mode 100644 index 000000000000..2c8430197ec0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 AL02-C7 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi new file mode 100644 index 000000000000..0ed19fbf7d87 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 SoC device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { + compatible = "fixed-clock"; + clock-frequency = <353000000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_region: tz@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + interrupt-controller; + #interrupt-cells = <2>; + + uart2_pins: uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq9574-gcc"; + reg = <0x01800000 0x80000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&bias_pll_ubi_nc_clk>, + <0>, + <0>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + sdhc_1: mmc@7804000 { + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board_clk>; + clock-names = "iface", "core", "xo"; + non-removable; + status = "disabled"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00000000 0xffd>; + msi-controller; + }; + + v2m1: v2m@1000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00001000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00002000 0xffd>; + msi-controller; + }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b120000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts new file mode 100644 index 000000000000..13cd9ad167df --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/* + * NOTE: The original firmware from Acer can only boot 32-bit kernels. + * To boot this device tree using arm64 it is necessary to flash 64-bit + * TZ/HYP firmware (e.g. taken from the DragonBoard 410c). + * See https://wiki.postmarketos.org/wiki/Acer_Iconia_Talk_S_(acer-a1-724) + * for suggested installation instructions. + */ + +/ { + model = "Acer Iconia Talk S A1-724"; + compatible = "acer,a1-724", "qcom,msm8916"; + chassis-type = "tablet"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + /* Actually ft5446 */ + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l16>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + + status = "okay"; +}; + +&sdhc_2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + touchscreen_default: touchscreen-default-state { + reset-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 3dc9619fde6e..fecb69944cfa 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -5,6 +5,7 @@ #include "msm8916-pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> / { model = "Alcatel OneTouch Idol 3 (4.7)"; @@ -34,6 +35,19 @@ }; }; + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds_default>; + + led-0 { + gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "torch"; + function = LED_FUNCTION_TORCH; + }; + }; + usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>; @@ -116,16 +130,33 @@ }; }; -&pm8916_resin { +&blsp_i2c6 { status = "okay"; - linux,code = <KEY_VOLUMEDOWN>; + + led-controller@68 { + compatible = "si-en,sn3190"; + reg = <0x68>; + shutdown-gpios = <&msmgpio 89 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&led_enable_default &led_shutdown_default>; + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + }; + }; }; -&pm8916_vib { +&pm8916_resin { status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; }; -&pronto { +&pm8916_vib { status = "okay"; }; @@ -156,6 +187,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; @@ -260,7 +299,7 @@ }; &msmgpio { - accel_int_default: accel-int-default { + accel_int_default: accel-int-default-state { pins = "gpio31"; function = "gpio"; @@ -268,7 +307,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -276,7 +315,15 @@ bias-pull-up; }; - gyro_int_default: gyro-int-default { + gpio_leds_default: gpio-leds-default-state { + pins = "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gyro_int_default: gyro-int-default-state { pins = "gpio97", "gpio98"; function = "gpio"; @@ -284,7 +331,30 @@ bias-disable; }; - mag_reset_default: mag-reset-default { + /* + * The OEM wired an additional GPIO to be asserted so that + * the si-en,sn3190 LED IC works. Since this GPIO is not + * part of the IC datasheet nor supported by the driver, + * force it asserted here. + */ + led_enable_default: led-enable-default-state { + pins = "gpio102"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-high; + }; + + led_shutdown_default: led-shutdown-default-state { + pins = "gpio89"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default-state { pins = "gpio8"; function = "gpio"; @@ -292,7 +362,7 @@ bias-disable; }; - proximity_int_default: proximity-int-default { + proximity_int_default: proximity-int-default-state { pins = "gpio12"; function = "gpio"; @@ -300,7 +370,7 @@ bias-pull-up; }; - ts_int_reset_default: ts-int-reset-default { + ts_int_reset_default: ts-int-reset-default-state { pins = "gpio13", "gpio100"; function = "gpio"; @@ -308,7 +378,7 @@ bias-disable; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio69"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index dd92070a1211..91284a1d0966 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -128,10 +128,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -159,6 +155,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; @@ -263,7 +267,7 @@ }; &msmgpio { - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio117"; function = "gpio"; @@ -271,7 +275,7 @@ bias-pull-up; }; - imu_default: imu-default { + imu_default: imu-default-state { pins = "gpio36"; function = "gpio"; @@ -279,7 +283,7 @@ bias-disable; }; - mag_reset_default: mag-reset-default { + mag_reset_default: mag-reset-default-state { pins = "gpio112"; function = "gpio"; @@ -287,7 +291,7 @@ bias-disable; }; - sd_vmmc_en_default: sd-vmmc-en-default { + sd_vmmc_en_default: sd-vmmc-en-default-state { pins = "gpio87"; function = "gpio"; @@ -295,14 +299,16 @@ bias-disable; }; - touchscreen_default: touchscreen-default { - pins = "gpio13"; - function = "gpio"; + touchscreen_default: touchscreen-default-state { + touch-pins { + pins = "gpio13"; + function = "gpio"; - drive-strength = <2>; - bias-pull-up; + drive-strength = <2>; + bias-pull-up; + }; - reset { + reset-pins { pins = "gpio12"; function = "gpio"; @@ -311,7 +317,7 @@ }; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts new file mode 100644 index 000000000000..525ec76efeeb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "GPLUS FL8005A"; + compatible = "gplus,fl8005a", "qcom,msm8916"; + chassis-type = "tablet"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + flash-led-controller { + /* Actually qcom,leds-gpio-flash */ + compatible = "sgmicro,sgm3140"; + enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&camera_flash_default>; + pinctrl-names = "default"; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&gpio_leds_default>; + pinctrl-names = "default"; + + led-red { + function = LED_FUNCTION_CHARGING; + color = <LED_COLOR_ID_RED>; + gpios = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + }; + + led-green { + function = LED_FUNCTION_CHARGING; + color = <LED_COLOR_ID_GREEN>; + gpios = <&msmgpio 118 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + /* Actually ft5402 */ + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l17>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <500>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + camera_flash_default: camera-flash-default-state { + pins = "gpio31", "gpio32"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + gpio_leds_default: gpio-led-default-state { + pins = "gpio117", "gpio118"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default-state { + reset-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 9e470c67274e..5b1bac8f5122 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only -// Copyright (C) 2021 Stephan Gerhold +/* + * Copyright (C) 2021 Stephan Gerhold + */ /dts-v1/; @@ -225,10 +227,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -310,6 +308,14 @@ qcom,hphl-jack-type-normally-open; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; @@ -414,7 +420,7 @@ }; &msmgpio { - accel_irq_default: accel-irq-default { + accel_irq_default: accel-irq-default-state { pins = "gpio115"; function = "gpio"; @@ -422,7 +428,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -430,7 +436,7 @@ bias-pull-up; }; - gpio_leds_default: gpio-leds-default { + gpio_leds_default: gpio-leds-default-state { pins = "gpio8", "gpio9", "gpio10"; function = "gpio"; @@ -438,7 +444,7 @@ bias-disable; }; - nfc_default: nfc-default { + nfc_default: nfc-default-state { pins = "gpio2", "gpio20", "gpio21"; function = "gpio"; @@ -446,7 +452,7 @@ bias-disable; }; - mag_reset_default: mag-reset-default { + mag_reset_default: mag-reset-default-state { pins = "gpio36"; function = "gpio"; @@ -454,7 +460,7 @@ bias-disable; }; - prox_irq_default: prox-irq-default { + prox_irq_default: prox-irq-default-state { pins = "gpio113"; function = "gpio"; @@ -462,7 +468,7 @@ bias-disable; }; - reg_lcd_en_default: reg-lcd-en-default { + reg_lcd_en_default: reg-lcd-en-default-state { pins = "gpio32", "gpio97"; function = "gpio"; @@ -470,7 +476,7 @@ bias-disable; }; - sdhc2_cd_default: sdhc2-cd-default { + sdhc2_cd_default: sdhc2-cd-default-state { pins = "gpio56"; function = "gpio"; @@ -478,7 +484,7 @@ bias-disable; }; - ts_irq_default: ts-irq-default { + ts_irq_default: ts-irq-default-state { pins = "gpio13"; function = "gpio"; @@ -486,7 +492,7 @@ bias-disable; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio117"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index d85e7f7c0835..f1dd625e1822 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -22,7 +22,7 @@ }; reserved-memory { - // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 + /* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */ /delete-node/ wcnss@89300000; wcnss_mem: wcnss@8b600000 { @@ -204,12 +204,12 @@ rmi4-f01@1 { reg = <0x1>; - syna,nosleep-mode = <1>; // Allow sleeping + syna,nosleep-mode = <1>; /* Allow sleeping */ }; rmi4-f12@12 { reg = <0x12>; - syna,sensor-type = <1>; // Touchscreen + syna,sensor-type = <1>; /* Touchscreen */ }; }; }; @@ -231,10 +231,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -263,6 +259,14 @@ extcon = <&pm8916_usbin>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; @@ -367,7 +371,7 @@ }; &msmgpio { - accel_int_default: accel-int-default { + accel_int_default: accel-int-default-state { pins = "gpio116"; function = "gpio"; @@ -375,7 +379,7 @@ bias-disable; }; - camera_flash_default: camera-flash-default { + camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; function = "gpio"; @@ -383,7 +387,7 @@ bias-disable; }; - ctp_pwr_en_default: ctp-pwr-en-default { + ctp_pwr_en_default: ctp-pwr-en-default-state { pins = "gpio17"; function = "gpio"; @@ -391,7 +395,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -399,7 +403,7 @@ bias-pull-up; }; - gyro_int_default: gyro-int-default { + gyro_int_default: gyro-int-default-state { pins = "gpio22", "gpio23"; function = "gpio"; @@ -407,7 +411,7 @@ bias-disable; }; - light_int_default: light-int-default { + light_int_default: light-int-default-state { pins = "gpio115"; function = "gpio"; @@ -415,7 +419,7 @@ bias-disable; }; - magn_int_default: magn-int-default { + magn_int_default: magn-int-default-state { pins = "gpio113"; function = "gpio"; @@ -423,7 +427,7 @@ bias-disable; }; - tp_int_default: tp-int-default { + tp_int_default: tp-int-default-state { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index b4812f093b17..b79e80913af9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -99,10 +99,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -130,6 +126,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; @@ -234,7 +238,7 @@ }; &msmgpio { - button_backlight_default: button-backlight-default { + button_backlight_default: button-backlight-default-state { pins = "gpio17"; function = "gpio"; @@ -242,7 +246,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -250,7 +254,7 @@ bias-pull-up; }; - mag_reset_default: mag-reset-default { + mag_reset_default: mag-reset-default-state { pins = "gpio111"; function = "gpio"; @@ -258,7 +262,7 @@ bias-disable; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 7dedb91b9930..33dfcf318a81 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -5,8 +5,8 @@ &msmgpio { - blsp1_uart1_default: blsp1-uart1-default { - // TX, RX, CTS_N, RTS_N + blsp1_uart1_default: blsp1-uart1-default-state { + /* TX, RX, CTS_N, RTS_N */ pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "blsp_uart1"; @@ -14,7 +14,7 @@ bias-disable; }; - blsp1_uart1_sleep: blsp1-uart1-sleep { + blsp1_uart1_sleep: blsp1-uart1-sleep-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "gpio"; @@ -22,7 +22,7 @@ bias-pull-down; }; - blsp1_uart2_default: blsp1-uart2-default { + blsp1_uart2_default: blsp1-uart2-default-state { pins = "gpio4", "gpio5"; function = "blsp_uart2"; @@ -30,7 +30,7 @@ bias-disable; }; - blsp1_uart2_sleep: blsp1-uart2-sleep { + blsp1_uart2_sleep: blsp1-uart2-sleep-state { pins = "gpio4", "gpio5"; function = "gpio"; @@ -38,14 +38,15 @@ bias-pull-down; }; - spi1_default: spi1-default { - pins = "gpio0", "gpio1", "gpio3"; - function = "blsp_spi1"; + spi1_default: spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; - drive-strength = <12>; - bias-disable; - - cs { + drive-strength = <12>; + bias-disable; + }; + cs-pins { pins = "gpio2"; function = "gpio"; @@ -55,7 +56,7 @@ }; }; - spi1_sleep: spi1-sleep { + spi1_sleep: spi1-sleep-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "gpio"; @@ -63,14 +64,15 @@ bias-pull-down; }; - spi2_default: spi2-default { - pins = "gpio4", "gpio5", "gpio7"; - function = "blsp_spi2"; + spi2_default: spi2-default-state { + spi-pins { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; - drive-strength = <12>; - bias-disable; - - cs { + drive-strength = <12>; + bias-disable; + }; + cs-pins { pins = "gpio6"; function = "gpio"; @@ -80,7 +82,7 @@ }; }; - spi2_sleep: spi2-sleep { + spi2_sleep: spi2-sleep-state { pins = "gpio4", "gpio5", "gpio6", "gpio7"; function = "gpio"; @@ -88,14 +90,15 @@ bias-pull-down; }; - spi3_default: spi3-default { - pins = "gpio8", "gpio9", "gpio11"; - function = "blsp_spi3"; + spi3_default: spi3-default-state { + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; - drive-strength = <12>; - bias-disable; - - cs { + drive-strength = <12>; + bias-disable; + }; + cs-pins { pins = "gpio10"; function = "gpio"; @@ -105,7 +108,7 @@ }; }; - spi3_sleep: spi3-sleep { + spi3_sleep: spi3-sleep-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "gpio"; @@ -113,14 +116,15 @@ bias-pull-down; }; - spi4_default: spi4-default { - pins = "gpio12", "gpio13", "gpio15"; - function = "blsp_spi4"; - - drive-strength = <12>; - bias-disable; + spi4_default: spi4-default-state { + spi-pins { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; - cs { + drive-strength = <12>; + bias-disable; + }; + cs-pins { pins = "gpio14"; function = "gpio"; @@ -130,7 +134,7 @@ }; }; - spi4_sleep: spi4-sleep { + spi4_sleep: spi4-sleep-state { pins = "gpio12", "gpio13", "gpio14", "gpio15"; function = "gpio"; @@ -138,14 +142,15 @@ bias-pull-down; }; - spi5_default: spi5-default { - pins = "gpio16", "gpio17", "gpio19"; - function = "blsp_spi5"; + spi5_default: spi5-default-state { + spi-pins { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; - drive-strength = <12>; - bias-disable; - - cs { + drive-strength = <12>; + bias-disable; + }; + cs-pins { pins = "gpio18"; function = "gpio"; @@ -155,7 +160,7 @@ }; }; - spi5_sleep: spi5-sleep { + spi5_sleep: spi5-sleep-state { pins = "gpio16", "gpio17", "gpio18", "gpio19"; function = "gpio"; @@ -163,14 +168,15 @@ bias-pull-down; }; - spi6_default: spi6-default { - pins = "gpio20", "gpio21", "gpio23"; - function = "blsp_spi6"; - - drive-strength = <12>; - bias-disable; + spi6_default: spi6-default-state { + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; - cs { + drive-strength = <12>; + bias-disable; + }; + cs-pins { pins = "gpio22"; function = "gpio"; @@ -180,7 +186,7 @@ }; }; - spi6_sleep: spi6-sleep { + spi6_sleep: spi6-sleep-state { pins = "gpio20", "gpio21", "gpio22", "gpio23"; function = "gpio"; @@ -188,7 +194,7 @@ bias-pull-down; }; - i2c1_default: i2c1-default { + i2c1_default: i2c1-default-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; @@ -196,7 +202,7 @@ bias-disable; }; - i2c1_sleep: i2c1-sleep { + i2c1_sleep: i2c1-sleep-state { pins = "gpio2", "gpio3"; function = "gpio"; @@ -204,7 +210,7 @@ bias-disable; }; - i2c2_default: i2c2-default { + i2c2_default: i2c2-default-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; @@ -212,7 +218,7 @@ bias-disable; }; - i2c2_sleep: i2c2-sleep { + i2c2_sleep: i2c2-sleep-state { pins = "gpio6", "gpio7"; function = "gpio"; @@ -220,7 +226,7 @@ bias-disable; }; - i2c3_default: i2c3-default { + i2c3_default: i2c3-default-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; @@ -228,7 +234,7 @@ bias-disable; }; - i2c3_sleep: i2c3-sleep { + i2c3_sleep: i2c3-sleep-state { pins = "gpio10", "gpio11"; function = "gpio"; @@ -236,7 +242,7 @@ bias-disable; }; - i2c4_default: i2c4-default { + i2c4_default: i2c4-default-state { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; @@ -244,7 +250,7 @@ bias-disable; }; - i2c4_sleep: i2c4-sleep { + i2c4_sleep: i2c4-sleep-state { pins = "gpio14", "gpio15"; function = "gpio"; @@ -252,7 +258,7 @@ bias-disable; }; - i2c5_default: i2c5-default { + i2c5_default: i2c5-default-state { pins = "gpio18", "gpio19"; function = "blsp_i2c5"; @@ -260,7 +266,7 @@ bias-disable; }; - i2c5_sleep: i2c5-sleep { + i2c5_sleep: i2c5-sleep-state { pins = "gpio18", "gpio19"; function = "gpio"; @@ -268,7 +274,7 @@ bias-disable; }; - i2c6_default: i2c6-default { + i2c6_default: i2c6-default-state { pins = "gpio22", "gpio23"; function = "blsp_i2c6"; @@ -276,7 +282,7 @@ bias-disable; }; - i2c6_sleep: i2c6-sleep { + i2c6_sleep: i2c6-sleep-state { pins = "gpio22", "gpio23"; function = "gpio"; @@ -284,14 +290,14 @@ bias-disable; }; - pmx-sdc1-clk { - sdc1_clk_on: clk-on { + pmx-sdc1-clk-state { + sdc1_clk_on: clk-on-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - sdc1_clk_off: clk-off { + sdc1_clk_off: clk-off-pins { pins = "sdc1_clk"; bias-disable; @@ -299,14 +305,14 @@ }; }; - pmx-sdc1-cmd { - sdc1_cmd_on: cmd-on { + pmx-sdc1-cmd-state { + sdc1_cmd_on: cmd-on-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <10>; }; - sdc1_cmd_off: cmd-off { + sdc1_cmd_off: cmd-off-pins { pins = "sdc1_cmd"; bias-pull-up; @@ -314,14 +320,14 @@ }; }; - pmx-sdc1-data { - sdc1_data_on: data-on { + pmx-sdc1-data-state { + sdc1_data_on: data-on-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; - sdc1_data_off: data-off { + sdc1_data_off: data-off-pins { pins = "sdc1_data"; bias-pull-up; @@ -329,14 +335,14 @@ }; }; - pmx-sdc2-clk { - sdc2_clk_on: clk-on { + pmx-sdc2-clk-state { + sdc2_clk_on: clk-on-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - sdc2_clk_off: clk-off { + sdc2_clk_off: clk-off-pins { pins = "sdc2_clk"; bias-disable; @@ -344,14 +350,14 @@ }; }; - pmx-sdc2-cmd { - sdc2_cmd_on: cmd-on { + pmx-sdc2-cmd-state { + sdc2_cmd_on: cmd-on-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - sdc2_cmd_off: cmd-off { + sdc2_cmd_off: cmd-off-pins { pins = "sdc2_cmd"; bias-pull-up; @@ -359,14 +365,14 @@ }; }; - pmx-sdc2-data { - sdc2_data_on: data-on { + pmx-sdc2-data-state { + sdc2_data_on: data-on-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; - sdc2_data_off: data-off { + sdc2_data_off: data-off-pins { pins = "sdc2_data"; bias-pull-up; @@ -374,15 +380,15 @@ }; }; - pmx-sdc2-cd-pin { - sdc2_cd_on: cd-on { + pmx-sdc2-cd-pin-state { + sdc2_cd_on: cd-on-pins { pins = "gpio38"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; - sdc2_cd_off: cd-off { + sdc2_cd_off: cd-off-pins { pins = "gpio38"; function = "gpio"; @@ -391,8 +397,8 @@ }; }; - cdc-pdm-lines { - cdc_pdm_lines_act: pdm-lines-on { + cdc-pdm-lines-state { + cdc_pdm_lines_act: pdm-lines-on-pins { pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; function = "cdc_pdm0"; @@ -400,7 +406,7 @@ drive-strength = <8>; bias-disable; }; - cdc_pdm_lines_sus: pdm-lines-off { + cdc_pdm_lines_sus: pdm-lines-off-pins { pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; function = "cdc_pdm0"; @@ -410,15 +416,15 @@ }; }; - ext-pri-tlmm-lines { - ext_pri_tlmm_lines_act: ext-pa-on { + ext-pri-tlmm-lines-state { + ext_pri_tlmm_lines_act: ext-pa-on-pins { pins = "gpio113", "gpio114", "gpio115", "gpio116"; function = "pri_mi2s"; drive-strength = <8>; bias-disable; }; - ext_pri_tlmm_lines_sus: ext-pa-off { + ext_pri_tlmm_lines_sus: ext-pa-off-pins { pins = "gpio113", "gpio114", "gpio115", "gpio116"; function = "pri_mi2s"; @@ -427,15 +433,15 @@ }; }; - ext-pri-ws-line { - ext_pri_ws_act: ext-pa-on { + ext-pri-ws-line-state { + ext_pri_ws_act: ext-pa-on-pins { pins = "gpio110"; function = "pri_mi2s_ws"; drive-strength = <8>; bias-disable; }; - ext_pri_ws_sus: ext-pa-off { + ext_pri_ws_sus: ext-pa-off-pins { pins = "gpio110"; function = "pri_mi2s_ws"; @@ -444,15 +450,15 @@ }; }; - ext-mclk-tlmm-lines { - ext_mclk_tlmm_lines_act: mclk-lines-on { + ext-mclk-tlmm-lines-state { + ext_mclk_tlmm_lines_act: mclk-lines-on-pins { pins = "gpio116"; function = "pri_mi2s"; drive-strength = <8>; bias-disable; }; - ext_mclk_tlmm_lines_sus: mclk-lines-off { + ext_mclk_tlmm_lines_sus: mclk-lines-off-pins { pins = "gpio116"; function = "pri_mi2s"; @@ -462,15 +468,15 @@ }; /* secondary Mi2S */ - ext-sec-tlmm-lines { - ext_sec_tlmm_lines_act: tlmm-lines-on { + ext-sec-tlmm-lines-state { + ext_sec_tlmm_lines_act: tlmm-lines-on-pins { pins = "gpio112", "gpio117", "gpio118", "gpio119"; function = "sec_mi2s"; drive-strength = <8>; bias-disable; }; - ext_sec_tlmm_lines_sus: tlmm-lines-off { + ext_sec_tlmm_lines_sus: tlmm-lines-off-pins { pins = "gpio112", "gpio117", "gpio118", "gpio119"; function = "sec_mi2s"; @@ -479,40 +485,38 @@ }; }; - cdc-dmic-lines { - cdc_dmic_lines_act: dmic-lines-on { - clk { - pins = "gpio0"; - function = "dmic0_clk"; + cdc_dmic_lines_act: cdc-dmic-lines-on-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; - drive-strength = <8>; - }; - data { - pins = "gpio1"; - function = "dmic0_data"; + drive-strength = <8>; + }; + data-pins { + pins = "gpio1"; + function = "dmic0_data"; - drive-strength = <8>; - }; + drive-strength = <8>; }; - cdc_dmic_lines_sus: dmic-lines-off { - clk { - pins = "gpio0"; - function = "dmic0_clk"; + }; + cdc_dmic_lines_sus: cdc-dmic-lines-off-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; - drive-strength = <2>; - bias-disable; - }; - data { - pins = "gpio1"; - function = "dmic0_data"; + drive-strength = <2>; + bias-disable; + }; + data-pins { + pins = "gpio1"; + function = "dmic0_data"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; }; - wcnss_pin_a: wcnss-active { + wcnss_pin_a: wcnss-active-state { pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; function = "wcss_wlan"; @@ -520,7 +524,7 @@ bias-pull-up; }; - cci0_default: cci0-default { + cci0_default: cci0-default-state { pins = "gpio29", "gpio30"; function = "cci_i2c"; @@ -528,22 +532,22 @@ bias-disable; }; - camera_front_default: camera-front-default { - pwdn { + camera_front_default: camera-front-default-state { + pwdn-pins { pins = "gpio33"; function = "gpio"; drive-strength = <16>; bias-disable; }; - rst { + rst-pins { pins = "gpio28"; function = "gpio"; drive-strength = <16>; bias-disable; }; - mclk1 { + mclk1-pins { pins = "gpio27"; function = "cam_mclk1"; @@ -552,22 +556,22 @@ }; }; - camera_rear_default: camera-rear-default { - pwdn { + camera_rear_default: camera-rear-default-state { + pwdn-pins { pins = "gpio34"; function = "gpio"; drive-strength = <16>; bias-disable; }; - rst { + rst-pins { pins = "gpio35"; function = "gpio"; drive-strength = <16>; bias-disable; }; - mclk0 { + mclk0-pins { pins = "gpio26"; function = "cam_mclk0"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi index 539823b2c36e..6eb5e0a39510 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi @@ -20,17 +20,6 @@ pll-supply = <&pm8916_l7>; }; -&pronto { - vddpx-supply = <&pm8916_l7>; - - iris { - vddxo-supply = <&pm8916_l7>; - vddrfa-supply = <&pm8916_s3>; - vddpa-supply = <&pm8916_l9>; - vdddig-supply = <&pm8916_l5>; - }; -}; - &sdhc_1 { vmmc-supply = <&pm8916_l8>; vqmmc-supply = <&pm8916_l5>; @@ -46,8 +35,19 @@ v3p3-supply = <&pm8916_l13>; }; +&wcnss { + vddpx-supply = <&pm8916_l7>; +}; + +&wcnss_iris { + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; +}; + &rpm_requests { - smd_rpm_regulators: pm8916-regulators { + smd_rpm_regulators: regulators { compatible = "qcom,rpm-pm8916-regulators"; /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */ diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 3255bd3fcb55..16d67749960e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -23,6 +23,17 @@ }; }; + clk_pwm: pwm { + compatible = "clk-pwm"; + #pwm-cells = <2>; + + clocks = <&gcc GCC_GP2_CLK>; + + pinctrl-names = "default"; + pinctrl-0 = <&motor_pwm_default>; + status = "disabled"; + }; + gpio-keys { compatible = "gpio-keys"; @@ -61,6 +72,24 @@ }; }; + /* + * NOTE: A5 connects GPIO 76 to a reglator powering the motor + * driver IC but A3 connects the same signal to an ENABLE pin of + * the driver. + */ + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&motor_en_default>; + }; + reg_vdd_tsp_a: regulator-vdd-tsp-a { compatible = "regulator-fixed"; regulator-name = "vdd_tsp_a"; @@ -144,7 +173,7 @@ interrupt-parent = <&msmgpio>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + en-gpios = <&msmgpio 20 GPIO_ACTIVE_LOW>; wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; @@ -153,6 +182,16 @@ pinctrl-0 = <&nfc_default &nfc_clk_req>; }; }; + + vibrator: vibrator { + compatible = "pwm-vibrator"; + + pwms = <&clk_pwm 0 100000>; + pwm-names = "enable"; + + vcc-supply = <®_motor_vdd>; + status = "disabled"; + }; }; &blsp_i2c2 { @@ -213,10 +252,6 @@ linux,code = <KEY_VOLUMEDOWN>; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -348,7 +383,7 @@ }; &msmgpio { - accel_int_default: accel-int-default { + accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; @@ -356,7 +391,7 @@ bias-disable; }; - fg_alert_default: fg-alert-default { + fg_alert_default: fg-alert-default-state { pins = "gpio121"; function = "gpio"; @@ -364,7 +399,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio109"; function = "gpio"; @@ -372,7 +407,7 @@ bias-pull-up; }; - gpio_hall_sensor_default: gpio-hall-sensor-default { + gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio52"; function = "gpio"; @@ -380,47 +415,60 @@ bias-disable; }; - mdss { - mdss_default: mdss-default { - pins = "gpio25"; - function = "gpio"; + mdss_default: mdss-default-state { + pins = "gpio25"; + function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - mdss_sleep: mdss-sleep { - pins = "gpio25"; - function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep-state { + pins = "gpio25"; + function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; + drive-strength = <2>; + bias-pull-down; }; - muic_i2c_default: muic-i2c-default { - pins = "gpio105", "gpio106"; + motor_en_default: motor-en-default-state { + pins = "gpio76"; function = "gpio"; drive-strength = <2>; bias-disable; }; - muic_int_default: muic-int-default { - pins = "gpio12"; + motor_pwm_default: motor-pwm-default-state { + pins = "gpio50"; + function = "gcc_gp2_clk_a"; + }; + + muic_i2c_default: muic-i2c-default-state { + pins = "gpio105", "gpio106"; function = "gpio"; drive-strength = <2>; bias-disable; }; - nfc_default: nfc-default { - pins = "gpio20", "gpio49"; + muic_int_default: muic-int-default-state { + pins = "gpio12"; function = "gpio"; drive-strength = <2>; bias-disable; + }; + + nfc_default: nfc-default-state { + nfc-pins { + pins = "gpio20", "gpio49"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; - irq { + irq-pins { pins = "gpio21"; function = "gpio"; @@ -429,7 +477,7 @@ }; }; - nfc_i2c_default: nfc-i2c-default { + nfc_i2c_default: nfc-i2c-default-state { pins = "gpio0", "gpio1"; function = "gpio"; @@ -437,7 +485,7 @@ bias-disable; }; - tkey_default: tkey-default { + tkey_default: tkey-default-state { pins = "gpio98"; function = "gpio"; @@ -445,7 +493,7 @@ bias-disable; }; - tkey_i2c_default: tkey-i2c-default { + tkey_i2c_default: tkey-i2c-default-state { pins = "gpio16", "gpio17"; function = "gpio"; @@ -453,7 +501,7 @@ bias-disable; }; - tsp_en_default: tsp-en-default { + tsp_en_default: tsp-en-default-state { pins = "gpio73"; function = "gpio"; @@ -461,7 +509,7 @@ bias-disable; }; - ts_int_default: ts-int-default { + ts_int_default: ts-int-default-state { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 6db5f78ca286..a1ca4d883420 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -81,6 +81,10 @@ }; }; +&clk_pwm { + status = "okay"; +}; + &dsi0 { panel@0 { reg = <0>; @@ -104,8 +108,20 @@ remote-endpoint = <&panel_in>; }; +&vibrator { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &msmgpio { - panel_vdd3_default: panel-vdd3-default { + panel_vdd3_default: panel-vdd3-default-state { pins = "gpio9"; function = "gpio"; @@ -113,7 +129,7 @@ bias-disable; }; - tkey_en_default: tkey-en-default { + tkey_en_default: tkey-en-default-state { pins = "gpio86"; function = "gpio"; @@ -121,7 +137,7 @@ bias-disable; }; - tkey_led_en_default: tkey-led-en-default { + tkey_led_en_default: tkey-led-en-default-state { pins = "gpio60"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 5fb8ecd0c9ca..4e10b8a5e9f9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -50,10 +50,8 @@ }; }; -&pronto { - iris { - compatible = "qcom,wcn3660b"; - }; +&clk_pwm { + status = "okay"; }; &touchkey { @@ -61,8 +59,20 @@ vdd-supply = <®_touch_key>; }; +&vibrator { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + &msmgpio { - tkey_en_default: tkey-en-default { + tkey_en_default: tkey-en-default-state { pins = "gpio97"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index 542010fdfb8a..f6c4a011fdfd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -26,19 +26,6 @@ }; }; - reg_motor_vdd: regulator-motor-vdd { - compatible = "regulator-fixed"; - regulator-name = "motor_vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&motor_en_default>; - }; - reg_touch_key: regulator-touch-key { compatible = "regulator-fixed"; regulator-name = "touch_key"; @@ -61,21 +48,26 @@ /delete-node/ magnetometer@12; }; +®_motor_vdd { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + &touchkey { vcc-supply = <®_touch_key>; vdd-supply = <®_touch_key>; }; -&msmgpio { - motor_en_default: motor-en-default { - pins = "gpio76"; - function = "gpio"; +&wcnss { + status = "okay"; +}; - drive-strength = <2>; - bias-disable; - }; +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; - tkey_en_default: tkey-en-default { +&msmgpio { + tkey_en_default: tkey-en-default-state { pins = "gpio97"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index bc7134698978..4cbd68b89448 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -29,8 +29,12 @@ gpio-leds { compatible = "gpio-leds"; - keyled { + led-keyled { + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; pinctrl-0 = <&gpio_leds_default>; }; @@ -46,7 +50,7 @@ }; &msmgpio { - gpio_leds_default: gpio-led-default { + gpio_leds_default: gpio-led-default-state { pins = "gpio60"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi new file mode 100644 index 000000000000..74ffd04db8d8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -0,0 +1,296 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + volume-up-button { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + home-button { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor-switch { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max77849-battery"; + reg = <0x36>; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,over-volt = <4400>; + + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&fuelgauge_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + light-sensor@10 { + compatible = "capella,cm3323"; + reg = <0x10>; + }; + + accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; + + st,drdy-int-pin = <1>; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +/* FIXME: Replace with MAX77849 MUIC when driver is available */ +&pm8916_usbin { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&usb { + dr_mode = "peripheral"; + extcon = <&pm8916_usbin>; + + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&pm8916_usbin>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + fuelgauge_int_default: fuelgauge-int-default-state { + pins = "gpio121"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio109"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio52"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts new file mode 100644 index 000000000000..607a5dc8a534 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-gt5-common.dtsi" + +/ { + model = "Samsung Galaxy Tab A 9.7 (2015)"; + compatible = "samsung,gt510", "qcom,msm8916"; + chassis-type = "tablet"; + + clk_pwm: pwm { + compatible = "clk-pwm"; + #pwm-cells = <2>; + + clocks = <&gcc GCC_GP2_CLK>; + + pinctrl-0 = <&motor_pwm_default>; + pinctrl-names = "default"; + }; + + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&motor_en_default>; + pinctrl-names = "default"; + }; + + reg_tsp_1p8v: regulator-tsp-1p8v { + compatible = "regulator-fixed"; + regulator-name = "tsp_1p8v"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_en_default>; + pinctrl-names = "default"; + }; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vibrator { + compatible = "pwm-vibrator"; + + pwms = <&clk_pwm 0 100000>; + pwm-names = "enable"; + + vcc-supply = <®_motor_vdd>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <®_tsp_1p8v>; + vdda-supply = <®_tsp_3p3v>; + + reset-gpios = <&msmgpio 114 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&tsp_int_rst_default>; + pinctrl-names = "default"; + }; +}; + +&msmgpio { + motor_en_default: motor-en-default-state { + pins = "gpio76"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + motor_pwm_default: motor-pwm-default-state { + pins = "gpio50"; + function = "gcc_gp2_clk_a"; + }; + + tsp_en_default: tsp-en-default-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default: tsp-int-rst-default-state { + pins = "gpio13", "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts new file mode 100644 index 000000000000..5d6f8383306b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-gt5-common.dtsi" + +/ { + model = "Samsung Galaxy Tab A 8.0 (2015)"; + compatible = "samsung,gt58", "qcom,msm8916"; + chassis-type = "tablet"; + + reg_vdd_tsp: regulator-vdd-tsp { + compatible = "regulator-fixed"; + regulator-name = "vdd_tsp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_tsp_en_default>; + pinctrl-names = "default"; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&vibrator_en_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "zinitix,bt532"; + reg = <0x20>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <768>; + touchscreen-size-y = <1024>; + + vcca-supply = <®_vdd_tsp>; + vdd-supply = <&pm8916_l6>; + + pinctrl-0 = <&tsp_int_default>; + pinctrl-names = "default"; + }; +}; + +&msmgpio { + reg_tsp_en_default: reg-tsp-en-default-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_default: tsp-int-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + vibrator_en_default: vibrator-en-default-state { + pins = "gpio76"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi new file mode 100644 index 000000000000..adeee0830e76 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + gpio_hall_sensor: gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + button-home { + label = "Home Key"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + i2c_muic: i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + muic: extcon@25 { + compatible = "siliconmitus,sm5703-muic"; + reg = <0x25>; + + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + extcon = <&muic>, <&muic>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio52"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + muic_i2c_default: muic-i2c-default-state { + pins = "gpio105", "gpio106"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + muic_int_default: muic-int-default-state { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts index eabeed18cfaa..0a32d33e9778 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts @@ -2,208 +2,14 @@ /dts-v1/; -#include "msm8916-pm8916.dtsi" -#include <dt-bindings/gpio/gpio.h> +#include "msm8916-samsung-j5-common.dtsi" / { model = "Samsung Galaxy J5 (2015)"; compatible = "samsung,j5", "qcom,msm8916"; chassis-type = "handset"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0"; - }; - - reserved-memory { - /* Additional memory used by Samsung firmware modifications */ - tz-apps@85500000 { - reg = <0x0 0x85500000 0x0 0xb00000>; - no-map; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_default>; - - label = "GPIO Buttons"; - - button-volume-up { - label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - }; - - button-home { - label = "Home Key"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; - linux,code = <KEY_HOMEPAGE>; - }; - }; -}; - -&blsp1_uart2 { - status = "okay"; -}; - -&pm8916_resin { - status = "okay"; - linux,code = <KEY_VOLUMEDOWN>; -}; - -/* FIXME: Replace with SM5703 MUIC when driver is available */ -&pm8916_usbin { - status = "okay"; -}; - -&pronto { - status = "okay"; -}; - -&sdhc_1 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; -}; - -&usb { - status = "okay"; - dr_mode = "peripheral"; - extcon = <&pm8916_usbin>; }; &usb_hs_phy { - extcon = <&pm8916_usbin>; qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>; }; - -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { - gpio_keys_default: gpio-keys-default { - pins = "gpio107", "gpio109"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts new file mode 100644 index 000000000000..7e1326cc13c5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-j5-common.dtsi" + +/ { + model = "Samsung Galaxy J5 (2016)"; + compatible = "samsung,j5x", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&muic { + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; +}; + +&muic_int_default { + pins = "gpio121"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index bbd6bb3f4fd7..1a41a4db874d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only -// Copyright (C) 2019 Stephan Gerhold +/* + * Copyright (C) 2019 Stephan Gerhold + */ /dts-v1/; @@ -270,14 +272,6 @@ status = "okay"; }; -&pronto { - status = "okay"; - - iris { - compatible = "qcom,wcn3660b"; - }; -}; - &sdhc_1 { status = "okay"; @@ -318,6 +312,14 @@ extcon = <&muic>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; @@ -422,7 +424,7 @@ }; &msmgpio { - fg_alert_default: fg-alert-default { + fg_alert_default: fg-alert-default-state { pins = "gpio121"; function = "gpio"; @@ -430,7 +432,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio109"; function = "gpio"; @@ -438,7 +440,7 @@ bias-pull-up; }; - gpio_hall_sensor_default: gpio-hall-sensor-default { + gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio52"; function = "gpio"; @@ -446,7 +448,7 @@ bias-disable; }; - imu_irq_default: imu-irq-default { + imu_irq_default: imu-irq-default-state { pins = "gpio115"; function = "gpio"; @@ -454,7 +456,7 @@ bias-disable; }; - muic_i2c_default: muic-i2c-default { + muic_i2c_default: muic-i2c-default-state { pins = "gpio105", "gpio106"; function = "gpio"; @@ -462,7 +464,7 @@ bias-disable; }; - muic_irq_default: muic-irq-default { + muic_irq_default: muic-irq-default-state { pins = "gpio12"; function = "gpio"; @@ -470,14 +472,15 @@ bias-disable; }; - nfc_default: nfc-default { - pins = "gpio20", "gpio49"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; + nfc_default: nfc-default-state { + nfc-pins { + pins = "gpio20", "gpio49"; + function = "gpio"; - irq { + drive-strength = <2>; + bias-disable; + }; + irq-pins { pins = "gpio21"; function = "gpio"; @@ -486,7 +489,7 @@ }; }; - nfc_i2c_default: nfc-i2c-default { + nfc_i2c_default: nfc-i2c-default-state { pins = "gpio0", "gpio1"; function = "gpio"; @@ -494,7 +497,7 @@ bias-disable; }; - tkey_default: tkey-default { + tkey_default: tkey-default-state { pins = "gpio98"; function = "gpio"; @@ -502,7 +505,7 @@ bias-disable; }; - tkey_en_default: tkey-en-default { + tkey_en_default: tkey-en-default-state { pins = "gpio86"; function = "gpio"; @@ -510,7 +513,7 @@ bias-disable; }; - tkey_i2c_default: tkey-i2c-default { + tkey_i2c_default: tkey-i2c-default-state { pins = "gpio16", "gpio17"; function = "gpio"; @@ -518,7 +521,7 @@ bias-disable; }; - tkey_led_en_default: tkey-led-en-default { + tkey_led_en_default: tkey-led-en-default-state { pins = "gpio60"; function = "gpio"; @@ -526,7 +529,7 @@ bias-disable; }; - tsp_en_default: tsp-en-default { + tsp_en_default: tsp-en-default-state { pins = "gpio73"; function = "gpio"; @@ -534,7 +537,7 @@ bias-disable; }; - tsp_irq_default: tsp-irq-default { + tsp_irq_default: tsp-irq-default-state { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts new file mode 100644 index 000000000000..82e260375174 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-ufi.dtsi" + +/ { + model = "uf896 4G Modem Stick"; + compatible = "thwc,uf896", "qcom,msm8916"; +}; + +&button_restart { + gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; +}; + +&led_r { + gpios = <&msmgpio 82 GPIO_ACTIVE_HIGH>; +}; + +&led_g { + gpios = <&msmgpio 83 GPIO_ACTIVE_HIGH>; +}; + +&led_b { + gpios = <&msmgpio 81 GPIO_ACTIVE_HIGH>; +}; + +&button_default { + pins = "gpio35"; + bias-pull-up; +}; + +&gpio_leds_default { + pins = "gpio81", "gpio82", "gpio83"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts new file mode 100644 index 000000000000..978f0abcdf8f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-ufi.dtsi" + +/ { + model = "ufi-001c/ufi-001b 4G Modem Stick"; + compatible = "thwc,ufi001c", "qcom,msm8916"; +}; + +&button_restart { + gpios = <&msmgpio 37 GPIO_ACTIVE_HIGH>; +}; + +&led_r { + gpios = <&msmgpio 22 GPIO_ACTIVE_HIGH>; +}; + +&led_g { + gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; +}; + +&led_b { + gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; +}; + +&mpss { + pinctrl-0 = <&sim_ctrl_default>; + pinctrl-names = "default"; +}; + +&button_default { + pins = "gpio37"; + bias-pull-down; +}; + +&gpio_leds_default { + pins = "gpio20", "gpio21", "gpio22"; +}; + +/* This selects the external SIM card slot by default */ +&msmgpio { + sim_ctrl_default: sim-ctrl-default-state { + esim-sel-pins { + pins = "gpio0", "gpio3"; + function = "gpio"; + bias-disable; + output-low; + }; + + sim-en-pins { + pins = "gpio1"; + function = "gpio"; + bias-disable; + output-low; + }; + + sim-sel-pins { + pins = "gpio2"; + function = "gpio"; + bias-disable; + output-high; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi new file mode 100644 index 000000000000..50bae6f214f1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-pm8916.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + chassis-type = "embedded"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + mpss_mem: mpss@86800000 { + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + gps_mem: gps@8bd00000 { + reg = <0x0 0x8bd00000 0x0 0x200000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&button_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + /* GPIO is board-specific */ + button_restart: button-restart { + label = "Restart"; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&gpio_leds_default>; + pinctrl-names = "default"; + + /* + * GPIOs are board-specific. + * Functions and default-states defined here are fallbacks. + * Feel free to override them if your board is different. + */ + led_r: led-r { + color = <LED_COLOR_ID_RED>; + default-state = "on"; + function = LED_FUNCTION_POWER; + }; + + led_g: led-g { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_WLAN; + }; + + led_b: led-b { + color = <LED_COLOR_ID_BLUE>; + default-state = "off"; + function = LED_FUNCTION_WAN; + }; + }; +}; + +&bam_dmux { + status = "okay"; +}; + +&bam_dmux_dma { + status = "okay"; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +/* Remove &dsi_phy0 from clocks to make sure that gcc probes with display disabled */ +&gcc { + clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>; +}; + +&mpss { + status = "okay"; +}; + +&pm8916_usbin { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&usb { + extcon = <&pm8916_usbin>; + dr_mode = "peripheral"; + + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&pm8916_usbin>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + /* pins are board-specific */ + button_default: button-default-state { + function = "gpio"; + drive-strength = <2>; + }; + + gpio_leds_default: gpio-leds-default-state { + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index 84a352dcf9a2..ac56c7595f78 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only -// Copyright (C) 2020 Stephan Gerhold +/* + * Copyright (C) 2020 Stephan Gerhold + */ /dts-v1/; @@ -21,6 +23,20 @@ stdout-path = "serial0"; }; + flash-led-controller { + compatible = "ocs,ocp8110"; + enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&camera_flash_default>; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -137,10 +153,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -168,6 +180,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; @@ -272,7 +292,15 @@ }; &msmgpio { - gpio_keys_default: gpio-keys-default { + camera_flash_default: camera-flash-default-state { + pins = "gpio31", "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -280,7 +308,7 @@ bias-pull-up; }; - imu_default: imu-default { + imu_default: imu-default-state { pins = "gpio115"; function = "gpio"; @@ -288,14 +316,15 @@ bias-disable; }; - touchscreen_default: touchscreen-default { - pins = "gpio13"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; + touchscreen_default: touchscreen-default-state { + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; - reset { + drive-strength = <2>; + bias-pull-up; + }; + reset-pins { pins = "gpio12"; function = "gpio"; @@ -304,7 +333,7 @@ }; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts new file mode 100644 index 000000000000..74ce6563be18 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-ufi.dtsi" + +/ { + model = "uz801 v3.0 4G Modem Stick"; + compatible = "yiming,uz801-v3", "qcom,msm8916"; +}; + +&button_restart { + gpios = <&msmgpio 23 GPIO_ACTIVE_LOW>; +}; + +&led_r { + gpios = <&msmgpio 7 GPIO_ACTIVE_HIGH>; +}; + +&led_g { + gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; +}; + +&led_b { + gpios = <&msmgpio 6 GPIO_ACTIVE_HIGH>; +}; + +&button_default { + pins = "gpio23"; + bias-pull-up; +}; + +&gpio_leds_default { + pins = "gpio6", "gpio7", "gpio8"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index a831064700ee..834e0b66b7f2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -180,6 +180,7 @@ L2_0: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; idle-states { @@ -442,11 +443,70 @@ reg = <0x0005c000 0x1000>; #address-cells = <1>; #size-cells = <1>; - tsens_caldata: caldata@d0 { - reg = <0xd0 0x8>; + + tsens_base1: base1@d0 { + reg = <0xd0 0x1>; + bits = <0 7>; + }; + + tsens_s0_p1: s0-p1@d0 { + reg = <0xd0 0x2>; + bits = <7 5>; + }; + + tsens_s0_p2: s0-p2@d1 { + reg = <0xd1 0x2>; + bits = <4 5>; + }; + + tsens_s1_p1: s1-p1@d2 { + reg = <0xd2 0x1>; + bits = <1 5>; + }; + tsens_s1_p2: s1-p2@d2 { + reg = <0xd2 0x2>; + bits = <6 5>; + }; + tsens_s2_p1: s2-p1@d3 { + reg = <0xd3 0x1>; + bits = <3 5>; + }; + + tsens_s2_p2: s2-p2@d4 { + reg = <0xd4 0x1>; + bits = <0 5>; + }; + + // no tsens with hw_id 3 + + tsens_s4_p1: s4-p1@d4 { + reg = <0xd4 0x2>; + bits = <5 5>; + }; + + tsens_s4_p2: s4-p2@d5 { + reg = <0xd5 0x1>; + bits = <2 5>; }; - tsens_calsel: calsel@ec { - reg = <0xec 0x4>; + + tsens_s5_p1: s5-p1@d5 { + reg = <0xd5 0x2>; + bits = <7 5>; + }; + + tsens_s5_p2: s5-p2@d6 { + reg = <0xd6 0x2>; + bits = <4 5>; + }; + + tsens_base2: base2@d7 { + reg = <0xd7 0x1>; + bits = <1 7>; + }; + + tsens_mode: mode@ef { + reg = <0xef 0x1>; + bits = <5 3>; }; }; @@ -473,8 +533,22 @@ compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; reg = <0x004a9000 0x1000>, /* TM */ <0x004a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; - nvmem-cell-names = "calib", "calib_sel"; + + // no hw_id 3 + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2"; #qcom,sensors = <5>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow"; @@ -963,7 +1037,7 @@ reg = <0x01937000 0x30000>; }; - mdss: mdss@1a00000 { + mdss: display-subsystem@1a00000 { status = "disabled"; compatible = "qcom,mdss"; reg = <0x01a00000 0x1000>, @@ -988,8 +1062,8 @@ #size-cells = <1>; ranges; - mdp: mdp@1a01000 { - compatible = "qcom,mdp5"; + mdp: display-controller@1a01000 { + compatible = "qcom,msm8916-mdp5", "qcom,mdp5"; reg = <0x01a01000 0x89000>; reg-names = "mdp_phys"; @@ -1021,7 +1095,8 @@ }; dsi0: dsi@1a98000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0x01a98000 0x25c>; reg-names = "dsi_ctrl"; @@ -1046,7 +1121,6 @@ "pixel", "core"; phys = <&dsi_phy0>; - phy-names = "dsi-phy"; #address-cells = <1>; #size-cells = <0>; @@ -1070,7 +1144,7 @@ }; }; - dsi_phy0: dsi-phy@1a98300 { + dsi_phy0: phy@1a98300 { compatible = "qcom,dsi-phy-28nm-lp"; reg = <0x01a98300 0xd4>, <0x01a98500 0x280>, @@ -1168,7 +1242,7 @@ }; cci: cci@1b0c000 { - compatible = "qcom,msm8916-cci"; + compatible = "qcom,msm8916-cci", "qcom,msm8226-cci"; #address-cells = <1>; #size-cells = <0>; reg = <0x01b0c000 0x1000>; @@ -1264,21 +1338,21 @@ clock-names = "iface", "bus"; qcom,iommu-secure-id = <17>; - // vfe: + /* VFE */ iommu-ctx@3000 { compatible = "qcom,msm-iommu-v1-sec"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; }; - // mdp_0: + /* MDP_0 */ iommu-ctx@4000 { compatible = "qcom,msm-iommu-v1-ns"; reg = <0x4000 0x1000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; }; - // venus_ns: + /* VENUS_NS */ iommu-ctx@5000 { compatible = "qcom,msm-iommu-v1-sec"; reg = <0x5000 0x1000>; @@ -1297,14 +1371,14 @@ clock-names = "iface", "bus"; qcom,iommu-secure-id = <18>; - // gfx3d_user: + /* GFX3D_USER */ iommu-ctx@1000 { compatible = "qcom,msm-iommu-v1-ns"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; }; - // gfx3d_priv: + /* GFX3D_PRIV */ iommu-ctx@2000 { compatible = "qcom,msm-iommu-v1-ns"; reg = <0x2000 0x1000>; @@ -1345,7 +1419,7 @@ }; mpss: remoteproc@4080000 { - compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil"; + compatible = "qcom,msm8916-mss-pil"; reg = <0x04080000 0x100>, <0x04020000 0x040>; @@ -1438,7 +1512,7 @@ lpass: audio-controller@7708000 { status = "disabled"; - compatible = "qcom,lpass-cpu-apq8016"; + compatible = "qcom,apq8016-lpass-cpu"; /* * Note: Unlike the name would suggest, the SEC_I2S_CLK @@ -1522,7 +1596,6 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; - status = "disabled"; }; blsp1_uart1: serial@78af000 { @@ -1560,6 +1633,8 @@ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_default>; pinctrl-1 = <&i2c1_sleep>; @@ -1592,6 +1667,8 @@ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_default>; pinctrl-1 = <&i2c2_sleep>; @@ -1624,6 +1701,8 @@ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c3_default>; pinctrl-1 = <&i2c3_sleep>; @@ -1656,6 +1735,8 @@ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_default>; pinctrl-1 = <&i2c4_sleep>; @@ -1688,6 +1769,8 @@ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_default>; pinctrl-1 = <&i2c5_sleep>; @@ -1720,6 +1803,8 @@ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c6_default>; pinctrl-1 = <&i2c6_sleep>; @@ -1786,7 +1871,7 @@ }; }; - pronto: remoteproc@a21b000 { + wcnss: remoteproc@a21b000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; reg-names = "ccu", "dxe", "pmu"; @@ -1812,9 +1897,8 @@ status = "disabled"; - iris { - compatible = "qcom,wcn3620"; - + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ clocks = <&rpmcc RPM_SMD_RF_CLK2>; clock-names = "xo"; }; @@ -1832,13 +1916,13 @@ compatible = "qcom,wcnss"; qcom,smd-channels = "WCNSS_CTRL"; - qcom,mmio = <&pronto>; + qcom,mmio = <&wcnss>; - bluetooth { + wcnss_bt: bluetooth { compatible = "qcom,wcnss-bt"; }; - wifi { + wcnss_wifi: wifi { compatible = "qcom,wcnss-wlan"; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, @@ -1999,7 +2083,7 @@ hysteresis = <2000>; type = "passive"; }; - cpu0_1_crit: cpu_crit { + cpu0_1_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -2029,7 +2113,7 @@ hysteresis = <2000>; type = "passive"; }; - cpu2_3_crit: cpu_crit { + cpu2_3_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -2059,7 +2143,7 @@ hysteresis = <2000>; type = "passive"; }; - gpu_crit: gpu_crit { + gpu_crit: gpu-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -2096,7 +2180,6 @@ }; }; }; - }; timer { diff --git a/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts new file mode 100644 index 000000000000..711d84dad9d7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Sireesh Kodali + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" + +/delete-node/ &cont_splash_mem; +/delete-node/ &qseecom_mem; + +/ { + model = "Motorola G5 Plus"; + compatible = "motorola,potter", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id = <0x46 0x83a0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (2220 * 1920 * 3)>; + + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84300000 { + reg = <0x0 0x84300000 0x0 0x2000000>; + no-map; + }; + + cont_splash_mem: cont-splash@90001000 { + reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + + reserved@aefd2000 { + reg = <0x0 0xaefd2000 0x0 0x2e000>; + no-map; + }; + + reserved@eefe4000 { + reg = <0x0 0xeefe4000 0x0 0x1c000>; + no-map; + }; + + ramoops@ef000000 { + compatible = "ramoops"; + reg = <0x0 0xef000000 0x0 0x80000>; + console-size = <0x40000>; + ftrace-size = <0>; + record-size = <0x3f800>; + pmsg-size = <0x800>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@20 { + reg = <0x20>; + compatible = "syna,rmi4-i2c"; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_reset>; + + vdd-supply = <&pm8953_l22>; + vio-supply = <&pm8953_l6>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <500>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmi8950_wled { + qcom,current-limit-microamp = <25000>; + qcom,num-strings = <3>; + qcom,external-pfet; + qcom,cabc; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <863000>; + regulator-max-microvolt = <1152000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1896000>; + regulator-max-microvolt = <2048000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <1 2>, <96 4>, <111 1>, <126 1>; + + ts_reset: ts-reset-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts new file mode 100644 index 000000000000..1d672e608653 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Alejandro Tafalla + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" + +/delete-node/ &adsp_fw_mem; +/delete-node/ &qseecom_mem; +/delete-node/ &wcnss_fw_mem; + +/ { + model = "Xiaomi Mi A2 Lite"; + compatible = "xiaomi,daisy", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id= <0x1000b 0x9>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (1920 * 2280 * 3)>; + + width = <1080>; + height = <2280>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + adsp_fw_mem: adsp@8d600000 { + reg = <0x0 0x8d600000 0x0 0x1200000>; + no-map; + }; + + wcnss_fw_mem: wcnss@8e800000 { + reg = <0x0 0x8e800000 0x0 0x700000>; + no-map; + }; + }; + + /* + * We bitbang on &i2c_4 because BLSP is protected by TZ as sensors are + * normally proxied via ADSP firmware. GPIOs aren't protected. + */ + i2c-sensors { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + imu@6a { + compatible = "st,lsm6dsl"; + reg = <0x6a>; + vdd-supply = <&pm8953_l10>; + vddio-supply = <&pm8953_l6>; + mount-matrix = "-1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_2 { + status = "okay"; + + speaker_codec: audio-codec@3a { + compatible = "maxim,max98927"; + reg = <0x3a>; + + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + + vmon-slot-no = <1>; + imon-slot-no = <1>; + interleave_mode = <0>; + + #sound-dai-cells = <0>; + }; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8953_l10>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2280>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmi8950_wled { + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <863000>; + regulator-max-microvolt = <1152000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1896000>; + regulator-max-microvolt = <2048000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <16 4>, <135 4>; +}; + +&uart_0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart_console_active>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts new file mode 100644 index 000000000000..ed95d09cedb1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts @@ -0,0 +1,329 @@ +// SPDX-License-Identifier: BSD-3-Clause +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" +#include <dt-bindings/leds/common.h> + +/delete-node/ &cont_splash_mem; +/delete-node/ &qseecom_mem; + +/ { + model = "Xiaomi Redmi Note 4X"; + compatible = "xiaomi,mido", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id = <11 0>; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + }; + + speaker_amp: audio-amplifier { + compatible = "awinic,aw8738"; + mode-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + awinic,mode = <5>; + sound-name-prefix = "Speaker Amp"; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (1920 * 1080 * 3)>; + + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + cont_splash_mem: cont-splash@90001000 { + reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + + ramoops@9ff00000 { + compatible = "ramoops"; + reg = <0x0 0x9ff00000 0x0 0x00100000>; + console-size = <0x100000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_2 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + + vcc-supply = <&pm8953_l10>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + led-max-microamp = <5000>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + led-max-microamp = <5000>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + led-max-microamp = <5000>; + }; + }; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8953_l10>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + vdd_l23-supply = <&pm8953_s3>; + + pm8953_s1: s1 { + regulator-min-microvolt = <863000>; + regulator-max-microvolt = <1152000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1896000>; + regulator-max-microvolt = <2048000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <135 4>; + + ts_int_active: ts-int-active-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts new file mode 100644 index 000000000000..831d3a42b583 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Danila Tikhonov <JIaxyga@protonmail.com> + * Copyright (c) 2022, Anton Bambura <jenneron@protonmail.com> + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" +#include <dt-bindings/leds/common.h> + +/delete-node/ &adsp_fw_mem; +/delete-node/ &qseecom_mem; +/delete-node/ &wcnss_fw_mem; + +/ { + model = "Xiaomi Mi A1"; + compatible = "xiaomi,tissot", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id = <0x1000b 0x00>; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>, <&gpio_hall_sensor_default>; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + adsp_fw_mem: adsp@8d600000 { + reg = <0x0 0x8d600000 0x0 0x1200000>; + no-map; + }; + + wcnss_fw_mem: wcnss@8e800000 { + reg = <0x0 0x8e800000 0x0 0x700000>; + no-map; + }; + + ramoops@9ff00000 { + compatible = "ramoops"; + reg = <0x0 0x9ff00000 0x0 0x00100000>; + record-size = <0x1000>; + console-size = <0x80000>; + ftrace-size = <0x1000>; + pmsg-size = <0x8000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_2 { + status = "okay"; + + max98927_codec: audio-codec@3a { + compatible = "maxim,max98927"; + reg = <0x3a>; + + reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; + + vmon-slot-no = <1>; + imon-slot-no = <1>; + + #sound-dai-cells = <1>; + }; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + + vcc-supply = <&pm8953_l10>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + }; + }; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8953_l10>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmi8950_wled { + qcom,num-strings = <2>; + qcom,external-pfet; + qcom,cabc; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <1156000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2050000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10:l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <16 4>, <135 4>; + + gpio_hall_sensor_default: gpio-hall-sensor-state { + pins = "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&uart_0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart_console_active>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts new file mode 100644 index 000000000000..b5be55034fd3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts @@ -0,0 +1,361 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Eugene Lepshy <fekz115@gmail.com> + * Copyright (c) 2022, Gianluca Boiano <morf3089@gmail.com> + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" +#include <dt-bindings/leds/common.h> + +/delete-node/ &adsp_fw_mem; +/delete-node/ &cont_splash_mem; +/delete-node/ &qseecom_mem; +/delete-node/ &wcnss_fw_mem; + +/ { + model = "Xiaomi Redmi 5 Plus"; + compatible = "xiaomi,vince", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id= <0x1000b 0x08>; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + cont_splash_mem: cont-splash@90001000 { + reg = <0x0 0x90001000 0x0 (1080 * 2160 * 3)>; + no-map; + }; + + adsp_fw_mem: adsp@8d600000 { + reg = <0x0 0x8d600000 0x0 0x1200000>; + no-map; + }; + + wcnss_fw_mem: wcnss@8e800000 { + reg = <0x0 0x8e800000 0x0 0x700000>; + no-map; + }; + + ramoops@9ff00000 { + compatible = "ramoops"; + reg = <0x0 0x9ff00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x80000>; + ftrace-size = <0x1000>; + pmsg-size = <0x8000>; + }; + }; + + /* + * We bitbang on &i2c_4 because BLSP is protected by TZ as sensors are + * normally proxied via ADSP firmware. GPIOs aren't protected. + */ + i2c-sensors { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + imu@6a { + compatible = "st,lsm6dsl"; + reg = <0x6a>; + vdd-supply = <&pm8953_l10>; + vddio-supply = <&pm8953_l6>; + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_2 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + + vcc-supply = <&pm8953_l10>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + }; + }; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@20 { + reg = <0x20>; + compatible = "syna,rmi4-i2c"; + interrupts-parent = <&tlmm>; + interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8953_l10>; + vio-supply = <&pm8953_l6>; + + pinctrl-names = "init", "suspend"; + pinctrl-0 = <&ts_reset_active &ts_int_active>; + pinctrl-1 = <&ts_reset_suspend &ts_int_suspend>; + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <500>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,rezero-wait-ms = <20>; + syna,sensor-type = <1>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <122>; + }; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmi8950_wled { + qcom,current-limit-microamp = <20000>; + qcom,ovp-millivolt = <29600>; + qcom,num-strings = <2>; + qcom,external-pfet; + qcom,cabc; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <1156000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2050000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1380000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <16 4>, <135 4>; + + ts_reset_active: ts-reset-active-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_suspend: ts-reset-suspend-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_int_active: ts-int-active-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_int_suspend: ts-int-suspend-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&uart_0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart_console_active>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 6b992a6d56c1..d44cfa0471e9 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -2,9 +2,13 @@ /* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ #include <dt-bindings/clock/qcom,gcc-msm8953.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include <dt-bindings/thermal/thermal.h> / { @@ -42,13 +46,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU1: cpu@1 { @@ -59,13 +56,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU2: cpu@2 { @@ -76,13 +66,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU3: cpu@3 { @@ -93,13 +76,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU4: cpu@100 { @@ -110,13 +86,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU5: cpu@101 { @@ -127,13 +96,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU6: cpu@102 { @@ -144,13 +106,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; CPU7: cpu@103 { @@ -161,13 +116,6 @@ capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; #cooling-cells = <2>; - - l1-icache { - compatible = "cache"; - }; - l1-dcache { - compatible = "cache"; - }; }; cpu-map { @@ -202,14 +150,16 @@ }; }; - L2_0: l2-cache_0 { + L2_0: l2-cache-0 { compatible = "cache"; cache-level = <2>; + cache-unified; }; - L2_1: l2-cache_1 { + L2_1: l2-cache-1 { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; @@ -245,18 +195,18 @@ #size-cells = <2>; ranges; - zap_shader_region: memory@81800000 { + zap_shader_region: zap@81800000 { compatible = "shared-dma-pool"; reg = <0x0 0x81800000 0x0 0x2000>; no-map; }; - memory@85b00000 { + qseecom_mem: qseecom@85b00000 { reg = <0x0 0x85b00000 0x0 0x800000>; no-map; }; - smem_mem: memory@86300000 { + smem_mem: smem@86300000 { compatible = "qcom,smem"; reg = <0x0 0x86300000 0x0 0x100000>; qcom,rpm-msg-ram = <&rpm_msg_ram>; @@ -264,47 +214,47 @@ no-map; }; - memory@86400000 { + reserved@86400000 { reg = <0x0 0x86400000 0x0 0x400000>; no-map; }; - mpss_mem: memory@86c00000 { + mpss_mem: mpss@86c00000 { reg = <0x0 0x86c00000 0x0 0x6a00000>; no-map; }; - adsp_fw_mem: memory@8d600000 { + adsp_fw_mem: adsp@8d600000 { reg = <0x0 0x8d600000 0x0 0x1100000>; no-map; }; - wcnss_fw_mem: memory@8e700000 { + wcnss_fw_mem: wcnss@8e700000 { reg = <0x0 0x8e700000 0x0 0x700000>; no-map; }; - memory@90000000 { + dfps_data_mem: dfps-data@90000000 { reg = <0 0x90000000 0 0x1000>; no-map; }; - memory@90001000 { + cont_splash_mem: cont-splash@90001000 { reg = <0x0 0x90001000 0x0 0x13ff000>; no-map; }; - venus_mem: memory@91400000 { + venus_mem: venus@91400000 { reg = <0x0 0x91400000 0x0 0x700000>; no-map; }; - mba_mem: memory@92000000 { + mba_mem: mba@92000000 { reg = <0x0 0x92000000 0x0 0x100000>; no-map; }; - memory@f2d00000 { + rmtfs@f2d00000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0xf2d00000 0x0 0x180000>; no-map; @@ -325,7 +275,7 @@ compatible = "qcom,rpm-msm8953"; qcom,smd-channels = "rpm_requests"; - rpmcc: rpmcc { + rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc"; clocks = <&xo_board>; clock-names = "xo"; @@ -337,9 +287,6 @@ #power-domain-cells = <1>; operating-points-v2 = <&rpmpd_opp_table>; - clocks = <&xo_board>; - clock-names = "ref"; - rpmpd_opp_table: opp-table { compatible = "operating-points-v2"; @@ -384,6 +331,80 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + smp2p_wcnss_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + smp2p_wcnss_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + smsm { compatible = "qcom,smsm"; @@ -398,6 +419,22 @@ #qcom,smem-state-cells = <1>; }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; }; soc: soc@0 { @@ -408,12 +445,12 @@ rpm_msg_ram: sram@60000 { compatible = "qcom,rpm-msg-ram"; - reg = <0x60000 0x8000>; + reg = <0x00060000 0x8000>; }; hsusb_phy: phy@79000 { compatible = "qcom,msm8953-qusb2-phy"; - reg = <0x79000 0x180>; + reg = <0x00079000 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, @@ -436,8 +473,8 @@ tsens0: thermal-sensor@4a9000 { compatible = "qcom,msm8953-tsens", "qcom,tsens-v2"; - reg = <0x4a9000 0x1000>, /* TM */ - <0x4a8000 0x1000>; /* SROT */ + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ #qcom,sensors = <16>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; @@ -447,261 +484,292 @@ restart@4ab000 { compatible = "qcom,pshold"; - reg = <0x4ab000 0x4>; + reg = <0x004ab000 0x4>; }; tlmm: pinctrl@1000000 { compatible = "qcom,msm8953-pinctrl"; - reg = <0x1000000 0x300000>; + reg = <0x01000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - gpio-ranges = <&tlmm 0 0 155>; + gpio-ranges = <&tlmm 0 0 142>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - uart_console_active: uart-console-active-pins { + uart_console_active: uart-console-active-state { pins = "gpio4", "gpio5"; function = "blsp_uart2"; drive-strength = <2>; bias-disable; }; - uart_console_sleep: uart-console-sleep-pins { + uart_console_sleep: uart-console-sleep-state { pins = "gpio4", "gpio5"; function = "blsp_uart2"; drive-strength = <2>; bias-pull-down; }; - sdc1_clk_on: sdc1-clk-on-pins { + sdc1_clk_on: sdc1-clk-on-state { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - sdc1_clk_off: sdc1-clk-off-pins { + sdc1_clk_off: sdc1-clk-off-state { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - sdc1_cmd_on: sdc1-cmd-on-pins { + sdc1_cmd_on: sdc1-cmd-on-state { pins = "sdc1_cmd"; bias-disable; drive-strength = <10>; }; - sdc1_cmd_off: sdc1-cmd-off-pins { + sdc1_cmd_off: sdc1-cmd-off-state { pins = "sdc1_cmd"; bias-disable; drive-strength = <2>; }; - sdc1_data_on: sdc1-data-on-pins { + sdc1_data_on: sdc1-data-on-state { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; - sdc1_data_off: sdc1-data-off-pins { + sdc1_data_off: sdc1-data-off-state { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - sdc1_rclk_on: sdc1-rclk-on-pins { + sdc1_rclk_on: sdc1-rclk-on-state { pins = "sdc1_rclk"; bias-pull-down; }; - sdc1_rclk_off: sdc1-rclk-off-pins { + sdc1_rclk_off: sdc1-rclk-off-state { pins = "sdc1_rclk"; bias-pull-down; }; - sdc2_clk_on: sdc2-clk-on-pins { + sdc2_clk_on: sdc2-clk-on-state { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - sdc2_clk_off: sdc2-clk-off-pins { + sdc2_clk_off: sdc2-clk-off-state { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - sdc2_cmd_on: sdc2-cmd-on-pins { + sdc2_cmd_on: sdc2-cmd-on-state { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - sdc2_cmd_off: sdc2-cmd-off-pins { + sdc2_cmd_off: sdc2-cmd-off-state { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - sdc2_data_on: sdc2-data-on-pins { + sdc2_data_on: sdc2-data-on-state { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; - sdc2_data_off: sdc2-data-off-pins { + sdc2_data_off: sdc2-data-off-state { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; }; - sdc2_cd_on: cd-on-pins { + sdc2_cd_on: cd-on-state { pins = "gpio133"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; - sdc2_cd_off: cd-off-pins { + sdc2_cd_off: cd-off-state { pins = "gpio133"; function = "gpio"; drive-strength = <2>; bias-disable; }; - gpio_key_default: gpio-key-default-pins { + gpio_key_default: gpio-key-default-state { pins = "gpio85"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; - i2c_1_default: i2c-1-default-pins { + i2c_1_default: i2c-1-default-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; - i2c_1_sleep: i2c-1-sleep-pins { + i2c_1_sleep: i2c-1-sleep-state { pins = "gpio2", "gpio3"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_2_default: i2c-2-default-pins { + i2c_2_default: i2c-2-default-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; - i2c_2_sleep: i2c-2-sleep-pins { + i2c_2_sleep: i2c-2-sleep-state { pins = "gpio6", "gpio7"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_3_default: i2c-3-default-pins { + i2c_3_default: i2c-3-default-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; drive-strength = <2>; bias-disable; }; - i2c_3_sleep: i2c-3-sleep-pins { + i2c_3_sleep: i2c-3-sleep-state { pins = "gpio10", "gpio11"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_4_default: i2c-4-default-pins { + i2c_4_default: i2c-4-default-state { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; - i2c_4_sleep: i2c-4-sleep-pins { + i2c_4_sleep: i2c-4-sleep-state { pins = "gpio14", "gpio15"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_5_default: i2c-5-default-pins { + i2c_5_default: i2c-5-default-state { pins = "gpio18", "gpio19"; function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; - i2c_5_sleep: i2c-5-sleep-pins { + i2c_5_sleep: i2c-5-sleep-state { pins = "gpio18", "gpio19"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_6_default: i2c-6-default-pins { + i2c_6_default: i2c-6-default-state { pins = "gpio22", "gpio23"; function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; - i2c_6_sleep: i2c-6-sleep-pins { + i2c_6_sleep: i2c-6-sleep-state { pins = "gpio22", "gpio23"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_7_default: i2c-7-default-pins { + i2c_7_default: i2c-7-default-state { pins = "gpio135", "gpio136"; function = "blsp_i2c7"; drive-strength = <2>; bias-disable; }; - i2c_7_sleep: i2c-7-sleep-pins { + i2c_7_sleep: i2c-7-sleep-state { pins = "gpio135", "gpio136"; function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c_8_default: i2c-8-default-pins { + i2c_8_default: i2c-8-default-state { pins = "gpio98", "gpio99"; function = "blsp_i2c8"; drive-strength = <2>; bias-disable; }; - i2c_8_sleep: i2c-8-sleep-pins { + i2c_8_sleep: i2c-8-sleep-state { pins = "gpio98", "gpio99"; function = "gpio"; drive-strength = <2>; bias-disable; }; + + wcnss_pin_a: wcnss-active-state { + + wcss-wlan2-pins { + pins = "gpio76"; + function = "wcss_wlan2"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan1-pins { + pins = "gpio77"; + function = "wcss_wlan1"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan0-pins { + pins = "gpio78"; + function = "wcss_wlan0"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan-pins { + pins = "gpio79", "gpio80"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; + }; }; gcc: clock-controller@1800000 { compatible = "qcom,gcc-msm8953"; - reg = <0x1800000 0x80000>; + reg = <0x01800000 0x80000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - clocks = <&xo_board>, + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>, - <0>, - <0>, - <0>, - <0>; + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <&dsi1_phy 1>, + <&dsi1_phy 0>; clock-names = "xo", "sleep", "dsi0pll", @@ -712,27 +780,271 @@ tcsr_mutex: hwlock@1905000 { compatible = "qcom,tcsr-mutex"; - reg = <0x1905000 0x20000>; + reg = <0x01905000 0x20000>; #hwlock-cells = <1>; }; tcsr: syscon@1937000 { compatible = "qcom,tcsr-msm8953", "syscon"; - reg = <0x1937000 0x30000>; + reg = <0x01937000 0x30000>; }; tcsr_phy_clk_scheme_sel: syscon@193f044 { compatible = "qcom,tcsr-msm8953", "syscon"; - reg = <0x193f044 0x4>; + reg = <0x0193f044 0x4>; + }; + + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + + reg = <0x01a00000 0x1000>, + <0x01ab0000 0x1040>; + reg-names = "mdss_phys", + "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "vsync", + "core"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + mdp: display-controller@1a01000 { + compatible = "qcom,msm8953-mdp5", "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 0x15>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi0: dsi@1a94000 { + compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x01a94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, + <&dsi0_phy 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + + phys = <&dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@1a94400 { + compatible = "qcom,dsi-phy-14nm-8953"; + reg = <0x01a94400 0x100>, + <0x01a94500 0x300>, + <0x01a94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + dsi1: dsi@1a96000 { + compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x01a96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + assigned-clocks = <&gcc BYTE1_CLK_SRC>, + <&gcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, + <&dsi1_phy 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE1_CLK>, + <&gcc GCC_MDSS_PCLK1_CLK>, + <&gcc GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + + phys = <&dsi1_phy>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@1a96400 { + compatible = "qcom,dsi-phy-14nm-8953"; + reg = <0x01a96400 0x100>, + <0x01a96500 0x300>, + <0x01a96800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + apps_iommu: iommu@1e00000 { + compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x01e20000 0x20000>; + + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_ASYNC_CLK>; + clock-names = "iface", "bus"; + + qcom,iommu-secure-id = <17>; + + #address-cells = <1>; + #iommu-cells = <1>; + #size-cells = <1>; + + /* VFE */ + iommu-ctx@14000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x14000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* MDP_0 */ + iommu-ctx@15000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x15000 0x1000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* VENUS_NS */ + iommu-ctx@16000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x16000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; }; spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x200f000 0x1000>, - <0x2400000 0x800000>, - <0x2c00000 0x800000>, - <0x3800000 0x200000>, - <0x200a000 0x2100>; + reg = <0x0200f000 0x1000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x2100>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; @@ -745,9 +1057,63 @@ #size-cells = <0>; }; + mpss: remoteproc@4080000 { + compatible = "qcom,msm8953-mss-pil"; + reg = <0x04080000 0x100>, + <0x04020000 0x040>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8953_VDDCX>, + <&rpmpd MSM8953_VDDMX>, + <&rpmpd MSM8953_VDDMD>; + power-domain-names = "cx", "mx","mss"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "bus", "mem", "xo"; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_BCR>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + qcom,ipc = <&apcs 8 12>; + qcom,remote-pid = <1>; + + label = "modem"; + }; + }; + usb3: usb@70f8800 { compatible = "qcom,msm8953-dwc3", "qcom,dwc3"; - reg = <0x70f8800 0x400>; + reg = <0x070f8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -791,14 +1157,13 @@ snps,hird-threshold = /bits/ 8 <0x00>; maximum-speed = "high-speed"; - phy_mode = "utmi"; }; }; sdhc_1: mmc@7824900 { compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; - reg = <0x7824900 0x500>, <0x7824000 0x800>; + reg = <0x07824900 0x500>, <0x07824000 0x800>; reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, @@ -807,7 +1172,7 @@ clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; power-domains = <&rpmpd MSM8953_VDDCX>; @@ -858,7 +1223,7 @@ sdhc_2: mmc@7864900 { compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; - reg = <0x7864900 0x500>, <0x7864000 0x800>; + reg = <0x07864900 0x500>, <0x07864000 0x800>; reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, @@ -867,7 +1232,7 @@ clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; power-domains = <&rpmpd MSM8953_VDDCX>; @@ -913,7 +1278,7 @@ uart_0: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; + reg = <0x078af000 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -924,7 +1289,7 @@ i2c_1: i2c@78b5000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b5000 0x600>; + reg = <0x078b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, @@ -942,7 +1307,7 @@ i2c_2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b6000 0x600>; + reg = <0x078b6000 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, @@ -960,7 +1325,7 @@ i2c_3: i2c@78b7000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b7000 0x600>; + reg = <0x078b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, @@ -977,7 +1342,7 @@ i2c_4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b8000 0x600>; + reg = <0x078b8000 0x600>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, @@ -994,7 +1359,7 @@ i2c_5: i2c@7af5000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x7af5000 0x600>; + reg = <0x07af5000 0x600>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, @@ -1011,7 +1376,7 @@ i2c_6: i2c@7af6000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x7af6000 0x600>; + reg = <0x07af6000 0x600>; interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, @@ -1028,7 +1393,7 @@ i2c_7: i2c@7af7000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x7af7000 0x600>; + reg = <0x07af7000 0x600>; interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, @@ -1045,7 +1410,7 @@ i2c_8: i2c@7af8000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x7af8000 0x600>; + reg = <0x07af8000 0x600>; interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, @@ -1060,6 +1425,72 @@ status = "disabled"; }; + wcnss: remoteproc@a21b000 { + compatible = "qcom,pronto-v3-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_fw_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8953_VDDCX>, + <&rpmpd MSM8953_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&smp2p_wcnss_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "disabled"; + + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -1069,13 +1500,13 @@ apcs: mailbox@b011000 { compatible = "qcom,msm8953-apcs-kpss-global", "syscon"; - reg = <0xb011000 0x1000>; + reg = <0x0b011000 0x1000>; #mbox-cells = <1>; }; timer@b120000 { compatible = "arm,armv7-timer-mem"; - reg = <0xb120000 0x1000>; + reg = <0x0b120000 0x1000>; #address-cells = <0x01>; #size-cells = <0x01>; ranges; @@ -1084,52 +1515,166 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb121000 0x1000>, - <0xb122000 0x1000>; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; }; frame@b123000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb123000 0x1000>; + reg = <0x0b123000 0x1000>; status = "disabled"; }; frame@b124000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb124000 0x1000>; + reg = <0x0b124000 0x1000>; status = "disabled"; }; frame@b125000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb125000 0x1000>; + reg = <0x0b125000 0x1000>; status = "disabled"; }; frame@b126000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb126000 0x1000>; + reg = <0x0b126000 0x1000>; status = "disabled"; }; frame@b127000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb127000 0x1000>; + reg = <0x0b127000 0x1000>; status = "disabled"; }; frame@b128000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb128000 0x1000>; + reg = <0x0b128000 0x1000>; status = "disabled"; }; }; + + lpass: remoteproc@c200000 { + compatible = "qcom,msm8953-adsp-pil"; + reg = <0x0c200000 0x100>; + + interrupts-extended = <&intc 0 293 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + power-domain-names = "cx"; + + memory-region = <&adsp_fw_mem>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + smd-edge { + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + + label = "lpass"; + mboxes = <&apcs 8>; + qcom,smd-edge = <1>; + qcom,remote-pid = <2>; + + apr { + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + q6core: service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@16 { + reg = <PRIMARY_MI2S_RX>; + qcom,sd-lines = <0 1>; + }; + dai@20 { + reg = <TERTIARY_MI2S_TX>; + qcom,sd-lines = <0 1>; + }; + dai@127 { + reg = <QUINARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@0 { + reg = <0>; + direction = <Q6ASM_DAI_RX>; + }; + dai@1 { + reg = <1>; + direction = <Q6ASM_DAI_TX>; + }; + dai@2 { + reg = <2>; + direction = <Q6ASM_DAI_RX>; + }; + dai@3 { + reg = <3>; + direction = <Q6ASM_DAI_RX>; + is-compress-dai; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; + }; }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts new file mode 100644 index 000000000000..3fb8e23e4330 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2016-2022, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org> + */ + +/dts-v1/; + +#include "msm8956-sony-xperia-loire.dtsi" + +/ { + model = "Sony Xperia X Compact"; + compatible = "sony,kugo-row", "qcom,msm8956"; + chassis-type = "handset"; +}; + +&blsp2_i2c2 { + status = "okay"; + + /* FUSB301 USB-C Controller */ +}; + +&blsp2_i2c4 { + status = "okay"; + + /* ST STMVL53L0 ToF @ 29 */ + /* AMS TCS349 RGBCIR @ 72 */ +}; + +&pm8950_l1 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts new file mode 100644 index 000000000000..87d657f6806b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2016-2022, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org> + */ + +/dts-v1/; + +#include "msm8956-sony-xperia-loire.dtsi" + +/ { + model = "Sony Xperia X"; + compatible = "sony,suzu-row", "qcom,msm8956"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi new file mode 100644 index 000000000000..085d79542e1b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi @@ -0,0 +1,286 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2016-2022, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org> + */ + +#include "msm8956.dtsi" + +#include "pm8004.dtsi" +#include "pm8950.dtsi" +#include "pmi8950.dtsi" + +/ { + qcom,msm-id = <266 0x10001>; /* MSM8956 v1.1 */ + qcom,board-id = <8 0>; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + mmc2 = &sdhc_3; /* SDC3 SDIO card slot */ + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + cont-splash@83000000 { + reg = <0x0 0x83000000 0x0 0x2800000>; + }; + + ramoops@57f00000 { + compatible = "ramoops"; + reg = <0 0x57f00000 0 0x100000>; + record-size = <0x20000>; + console-size = <0x40000>; + ftrace-size = <0x20000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + }; + + usbphy_1p2: regulator-usbphy-1p2 { + compatible = "regulator-fixed"; + regulator-name = "usbphy-1p2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vph_pwr>; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + /* Synaptics RMI4 @ 2c */ +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&gcc { + vdd_gfx-supply = <&pm8004_s5>; +}; + +&otg { + status = "okay"; +}; + +&pm8004_spmi_regulators { + vdd_s2-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + + /* Cluster 1 supply */ + pm8004_s2: s2 { + /* regulator-min-microvolt = <500000>; */ + /* Set .95V to prevent unstabilities until CPR for this SoC is done */ + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1165000>; + regulator-name = "vdd_apc1"; + /* Set always on until the CPU PLL is done */ + regulator-always-on; + regulator-boot-on; + }; + + pm8004_s5: s5 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1165000>; + regulator-enable-ramp-delay = <500>; + regulator-name = "vdd_gfx"; + /* Hack this on until the gpu driver is ready for it */ + regulator-always-on; + }; +}; + +&pm8950_spmi_regulators { + vdd_s5-supply = <&vph_pwr>; + + /* Cluster 0 supply */ + pm8950_spmi_s5: s5 { + /* Set .95V to prevent unstabilities until CPR for this SoC is done */ + /* regulator-min-microvolt = <790000>; */ + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1165000>; + regulator-name = "vdd_apc0"; + /* Set always on until the CPU PLL is done */ + regulator-always-on; + regulator-boot-on; + }; +}; + +&rpm_requests { + pm8950_regulators: regulators { + compatible = "qcom,rpm-pm8950-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_l1_l19-supply = <&pm8950_s3>; + vdd_l2_l23-supply = <&pm8950_s3>; + vdd_l3-supply = <&pm8950_s3>; + vdd_l5_l6_l7_l16-supply = <&pm8950_s4>; + vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>; + + pm8950_s1: s1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1162500>; + }; + + pm8950_s3: s3 { + regulator-min-microvolt = <1325000>; + regulator-max-microvolt = <1325000>; + regulator-always-on; + }; + + pm8950_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8950_l1: l1 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + }; + + pm8950_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8950_l3: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + pm8950_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <290000>; + regulator-allow-set-load; + }; + + pm8950_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8950_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8950_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-system-load = <130000>; + regulator-allow-set-load; + }; + + pm8950_l9: l9 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2400000>; + }; + + pm8950_l10: l10 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2900000>; + }; + + pm8950_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <60000>; + regulator-allow-set-load; + }; + + pm8950_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + + pm8950_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8950_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8950_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8950_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8950_l17: l17 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2900000>; + }; + + pm8950_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8950_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; +}; + +&sdhc_1 { + /* Toshiba THGBMHG8C4LBAU7 (032G34) */ + bus-width = <8>; + non-removable; + vmmc-supply = <&pm8950_l8>; + vqmmc-supply = <&pm8950_l5>; + status = "okay"; +}; + +&sdhc_2 { + bus-width = <4>; + cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8950_l11>; + vqmmc-supply = <&pm8950_l12>; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; +}; + +&usb_hs_phy { + vdd-supply = <&usbphy_1p2>; + vdda1p8-supply = <&pm8950_l7>; + vdda3p3-supply = <&pm8950_l13>; + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8956.dtsi b/arch/arm64/boot/dts/qcom/msm8956.dtsi new file mode 100644 index 000000000000..668e05185c21 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8956.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2016-2022, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@collabora.com> + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org> + */ + +#include "msm8976.dtsi" + +&pmu { + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; +}; + +&tsens { + compatible = "qcom,msm8956-tsens", "qcom,tsens-v1"; +}; + +/* + * You might be wondering.. why is it so empty out there? + * Well, the SoCs are almost identical. + */ diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi new file mode 100644 index 000000000000..f47fb8ea71e2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -0,0 +1,1354 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2016-2022, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@collabora.com> + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org> + */ + +#include <dt-bindings/clock/qcom,gcc-msm8976.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/qcom-rpmpd.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + cpu-idle-states = <&little_cpu_sleep_0>; + capacity-dmips-mhz = <573>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + cpu-idle-states = <&little_cpu_sleep_0>; + capacity-dmips-mhz = <573>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + cpu-idle-states = <&little_cpu_sleep_0>; + capacity-dmips-mhz = <573>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + cpu-idle-states = <&little_cpu_sleep_0>; + capacity-dmips-mhz = <573>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x100>; + enable-method = "psci"; + cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + capacity-dmips-mhz = <1024>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x101>; + enable-method = "psci"; + cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + capacity-dmips-mhz = <1024>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x102>; + enable-method = "psci"; + cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + capacity-dmips-mhz = <1024>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x103>; + enable-method = "psci"; + cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + capacity-dmips-mhz = <1024>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + little_cpu_sleep_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <181>; + exit-latency-us = <149>; + min-residency-us = <703>; + local-timer-stop; + }; + + big_cpu_sleep_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-retention"; + arm,psci-suspend-param = <0x00000002>; + entry-latency-us = <142>; + exit-latency-us = <99>; + min-residency-us = <242>; + }; + + big_cpu_sleep_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <158>; + exit-latency-us = <144>; + min-residency-us = <863>; + local-timer-stop; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8976", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ext-region@85b00000 { + reg = <0x0 0x85b00000 0x0 0x500000>; + no-map; + }; + + smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + reserved@86400000 { + reg = <0x0 0x86400000 0x0 0x800000>; + no-map; + }; + + mpss_mem: mpss@86c00000 { + reg = <0x0 0x86c00000 0x0 0x5600000>; + no-map; + }; + + lpass_mem: lpass@8c200000 { + reg = <0x0 0x8c200000 0x0 0x1800000>; + no-map; + }; + + venus_mem: memory@8da00000 { + reg = <0x0 0x8da00000 0x0 0x2600000>; + no-map; + }; + + tz-apps@8dd00000 { + reg = <0x0 0x8dd00000 0x0 0x1400000>; + no-map; + }; + }; + + smp2p-hexagon { + compatible = "qcom,smp2p"; + interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + qcom,smem = <443>, <429>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 13>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + qcom,smem = <435>, <428>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 17>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + qcom,smem = <451>, <431>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8976"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8976-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <RPM_SMD_LEVEL_RETENTION>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + + rpmpd_opp_turbo_no_cpr: opp10 { + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; + }; + + rpmpd_opp_turbo_high: opp111 { + opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>; + }; + }; + }; + }; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 12>; + qcom,ipc-2 = <&apcs 8 9>; + qcom,ipc-3 = <&apcs 8 18>; + + apps_smsm: apps@0 { + reg = <0>; + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = <0 290 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + rng@22000 { + compatible = "qcom,prng"; + reg = <0x00022000 0x140>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + usb_hs_phy: phy@6c000 { + compatible = "qcom,usb-hs-28nm-femtophy"; + reg = <0x0006c000 0x200>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "ahb", "sleep"; + resets = <&gcc RST_QUSB2_PHY_BCR>, + <&gcc RST_USB2_HS_PHY_ONLY_BCR>; + reset-names = "phy", "por"; + status = "disabled"; + }; + + qfprom: qfprom@a4000 { + compatible = "qcom,msm8976-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@218 { + reg = <0x218 1>; + bits = <0 8>; + }; + + tsens_s0_p1: s0-p1@219 { + reg = <0x219 0x1>; + bits = <0 6>; + }; + + tsens_s0_p2: s0-p2@219 { + reg = <0x219 0x2>; + bits = <6 6>; + }; + + tsens_s1_p1: s1-p1@21a { + reg = <0x21a 0x2>; + bits = <4 6>; + }; + + tsens_s1_p2: s1-p2@21b { + reg = <0x21b 0x1>; + bits = <2 6>; + }; + + tsens_s2_p1: s2-p1@21c { + reg = <0x21c 0x1>; + bits = <0 6>; + }; + + tsens_s2_p2: s2-p2@21c { + reg = <0x21c 0x2>; + bits = <6 6>; + }; + + tsens_s3_p1: s3-p1@21d { + reg = <0x21d 0x2>; + bits = <4 6>; + }; + + tsens_s3_p2: s3-p2@21e { + reg = <0x21e 0x1>; + bits = <2 6>; + }; + + tsens_base2: base2@220 { + reg = <0x220 1>; + bits = <0 8>; + }; + + tsens_s4_p1: s4-p1@221 { + reg = <0x221 0x1>; + bits = <0 6>; + }; + + tsens_s4_p2: s4-p2@221 { + reg = <0x221 0x2>; + bits = <6 6>; + }; + + tsens_s5_p1: s5-p1@222 { + reg = <0x222 0x2>; + bits = <4 6>; + }; + + tsens_s5_p2: s5-p2@223 { + reg = <0x224 0x1>; + bits = <2 6>; + }; + + tsens_s6_p1: s6-p1@224 { + reg = <0x224 0x1>; + bits = <0 6>; + }; + + tsens_s6_p2: s6-p2@224 { + reg = <0x224 0x2>; + bits = <6 6>; + }; + + tsens_s7_p1: s7-p1@225 { + reg = <0x225 0x2>; + bits = <4 6>; + }; + + tsens_s7_p2: s7-p2@226 { + reg = <0x226 0x2>; + bits = <2 6>; + }; + + tsens_mode: mode@228 { + reg = <0x228 1>; + bits = <0 3>; + }; + + tsens_s8_p1: s8-p1@228 { + reg = <0x228 0x2>; + bits = <3 6>; + }; + + tsens_s8_p2: s8-p2@229 { + reg = <0x229 0x1>; + bits = <1 6>; + }; + + tsens_s9_p1: s9-p1@229 { + reg = <0x229 0x2>; + bits = <7 6>; + }; + + tsens_s9_p2: s9-p2@22a { + reg = <0x22a 0x2>; + bits = <5 6>; + }; + + tsens_s10_p1: s10-p1@22b { + reg = <0x22b 0x2>; + bits = <3 6>; + }; + + tsens_s10_p2: s10-p2@22c { + reg = <0x22c 0x1>; + bits = <1 6>; + }; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,msm8976-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>, + <&tsens_s10_p1>, <&tsens_s10_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2", + "s10_p1", "s10_p2"; + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8976-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 145>; + interrupt-controller; + #interrupt-cells = <2>; + + spi1_default: spi0-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "blsp_spi1"; + drive-strength = <2>; + bias-disable; + }; + }; + + spi1_sleep: spi0-sleep-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp1_i2c2_default: blsp1-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_default: blsp1-i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_sleep: blsp1-i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart2_active: blsp2-uart2-active-state { + pins = "gpio20", "gpio21"; + function = "blsp_uart6"; + drive-strength = <4>; + bias-disable; + }; + + blsp2_uart2_sleep: blsp2-uart2-sleep-state { + pins = "gpio20", "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + /* 4 (not 6!) interfaces per QUP, BLSP2 indexes are numbered (n)+4 */ + blsp2_i2c2_default: blsp2-i2c2-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c4_default: blsp2-i2c4-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c4_sleep: blsp2-i2c4-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8976"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + assigned-clocks = <&gcc GPLL3>; + assigned-clock-rates = <1100000000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_XO_A_CLK_SRC>, + <0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "xo_a", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte"; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,msm8976-tcsr", "syscon"; + reg = <0x01937000 0x30000>; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x1000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x2100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + qcom,channel = <0>; + qcom,ee = <0>; + + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + sdhc_1: mmc@7824000 { + compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x500>, <0x07824000 0x800>; + reg-names = "hc", "core"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + status = "disabled"; + }; + + sdhc_2: mmc@7864000 { + compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x11c>, <0x07864000 0x800>; + reg-names = "hc", "core"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + status = "disabled"; + }; + + blsp1_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1f000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_default>; + pinctrl-1 = <&spi1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 10>, <&blsp1_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c4_default>; + pinctrl-1 = <&blsp1_i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + otg: usb@78db000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078db000 0x200>, + <0x078db200 0x200>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc RST_USB_HS_BCR>; + reset-names = "core"; + ahb-burst-config = <0>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + #reset-cells = <1>; + }; + + sdhc_3: mmc@7a24000 { + compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07a24900 0x11c>, <0x07a24000 0x800>; + reg-names = "hc", "core"; + + interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC3_AHB_CLK>, + <&gcc GCC_SDCC3_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + + status = "disabled"; + }; + + blsp2_dma: dma-controller@7ac4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07ac4000 0x1f000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp2_uart2: serial@7af0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x07af0000 0x200>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp2_i2c2: i2c@7af6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07af6000 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c4: i2c@7af8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07af8000 0x600>; + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c4_default>; + pinctrl-1 = <&blsp2_i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + apcs: mailbox@b011000 { + compatible = "qcom,msm8976-apcs-kpss-global", + "qcom,msm8994-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <19200000>; + + frame@b121000 { + reg = <0x0b121000 0x1000>, <0x0b122000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + imem: sram@8600000 { + compatible = "qcom,msm8976-imem", "syscon", "simple-mfd"; + reg = <0x08600000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0x08600000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + }; + + thermal-zones { + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + trips { + modem_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + qdsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + trips { + qdsp_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cam-isp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + trips { + cam_isp_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 4>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <50000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu4_alert1: trip-point1 { + temperature = <55000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu4_crit: cpu-crit { + temperature = <75000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 5>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <50000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu5_alert1: trip-point1 { + temperature = <55000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu5_crit: cpu-crit { + temperature = <75000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 6>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <50000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu6_alert1: trip-point1 { + temperature = <55000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu6_crit: cpu-crit { + temperature = <75000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 7>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <50000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu7_alert1: trip-point1 { + temperature = <55000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu7_crit: cpu-crit { + temperature = <75000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + big-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 8>; + + trips { + l2_alert0: trip-point0 { + temperature = <50000>; + hysteresis = <2000>; + type = "hot"; + }; + l2_alert1: trip-point1 { + temperature = <55000>; + hysteresis = <2000>; + type = "passive"; + }; + l2_crit: l2-crit { + temperature = <75000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 9>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <50000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu0_alert1: trip-point1 { + temperature = <55000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_crit: cpu-crit { + temperature = <75000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 10>; + + trips { + gpu_alert0: trip-point0 { + temperature = <50000>; + hysteresis = <2000>; + type = "hot"; + }; + gpu_alert1: trip-point1 { + temperature = <55000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu_crit: gpu-crit { + temperature = <75000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts index 7e6bce4af441..4159fc35571a 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) Jean Thomas <virgule@jeanthomas.me> +/* + * Copyright (c) Jean Thomas <virgule@jeanthomas.me> */ /dts-v1/; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts index e6a5ebd30e2f..ad9702dd171b 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) Jean Thomas <virgule@jeanthomas.me> +/* + * Copyright (c) Jean Thomas <virgule@jeanthomas.me> */ /dts-v1/; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi index 71e373b11de9..b8f2a01bcb96 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi @@ -1,7 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2015, LGE Inc. All rights reserved. +/* + * Copyright (c) 2015, LGE Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. - * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com> + * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com> + * Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com> */ /dts-v1/; @@ -13,6 +15,9 @@ /* cont_splash_mem has different memory mapping */ /delete-node/ &cont_splash_mem; +/* disabled on downstream, conflicts with cont_splash_mem */ +/delete-node/ &dfps_data_mem; + / { model = "LG Nexus 5X"; compatible = "lg,bullhead", "qcom,msm8992"; @@ -47,7 +52,12 @@ }; cont_splash_mem: memory@3400000 { - reg = <0 0x03400000 0 0x1200000>; + reg = <0 0x03400000 0 0xc00000>; + no-map; + }; + + reserved@5000000 { + reg = <0x0 0x05000000 0x0 0x1a00000>; no-map; }; }; @@ -58,7 +68,7 @@ }; &rpm_requests { - pm8994_regulators: pm8994-regulators { + pm8994_regulators: regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_l1-supply = <&pm8994_s1>; @@ -79,8 +89,8 @@ /* S1, S2, S6 and S12 are managed by RPMPD */ pm8994_s1: s1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; }; pm8994_s2: s2 { @@ -236,9 +246,8 @@ }; pm8994_l26: l26 { - /* TODO: value from downstream regulator-min-microvolt = <987500>; - fails to apply */ + regulator-max-microvolt = <987500>; }; pm8994_l27: l27 { @@ -252,19 +261,13 @@ }; pm8994_l29: l29 { - /* TODO: Unsupported voltage range. regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - qcom,init-voltage = <2800000>; - */ }; pm8994_l30: l30 { - /* TODO: get this verified regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - */ }; pm8994_l31: l31 { @@ -273,15 +276,12 @@ }; pm8994_l32: l32 { - /* TODO: get this verified regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - */ }; }; - pmi8994_regulators: pmi8994-regulators { + pmi8994_regulators: regulators-1 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index c4e87d0aec42..fcca1ba94da6 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -11,6 +11,12 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> +/delete-node/ &adsp_mem; +/delete-node/ &audio_mem; +/delete-node/ &mpss_mem; +/delete-node/ &peripheral_region; +/delete-node/ &rmtfs_mem; + / { model = "Xiaomi Mi 4C"; compatible = "xiaomi,libra", "qcom,msm8992"; @@ -70,25 +76,67 @@ #size-cells = <2>; ranges; - /* This is for getting crash logs using Android downstream kernels */ - ramoops@dfc00000 { - compatible = "ramoops"; - reg = <0x0 0xdfc00000 0x0 0x40000>; - console-size = <0x10000>; - record-size = <0x10000>; - ftrace-size = <0x10000>; - pmsg-size = <0x20000>; + memory_hole: hole@6400000 { + reg = <0 0x06400000 0 0x600000>; + no-map; + }; + + memory_hole2: hole2@6c00000 { + reg = <0 0x06c00000 0 0x2400000>; + no-map; + }; + + mpss_mem: mpss@9000000 { + reg = <0 0x09000000 0 0x5a00000>; + no-map; + }; + + tzapp: tzapp@ea00000 { + reg = <0 0x0ea00000 0 0x1900000>; + no-map; + }; + + mdm_rfsa_mem: mdm-rfsa@ca0b0000 { + reg = <0 0xca0b0000 0 0x10000>; + no-map; + }; + + rmtfs_mem: rmtfs@ca100000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xca100000 0 0x180000>; + no-map; + + qcom,client-id = <1>; }; - modem_region: modem_region@9000000 { - reg = <0x0 0x9000000 0x0 0x5a00000>; + audio_mem: audio@cb400000 { + reg = <0 0xcb000000 0 0x400000>; + no-mem; + }; + + qseecom_mem: qseecom@cb400000 { + reg = <0 0xcb400000 0 0x1c00000>; + no-mem; + }; + + adsp_rfsa_mem: adsp-rfsa@cd000000 { + reg = <0 0xcd000000 0 0x10000>; no-map; }; - tzapp: modem_region@ea00000 { - reg = <0x0 0xea00000 0x0 0x1900000>; + sensor_rfsa_mem: sensor-rfsa@cd010000 { + reg = <0 0xcd010000 0 0x10000>; no-map; }; + + ramoops@dfc00000 { + compatible = "ramoops"; + reg = <0 0xdfc00000 0 0x40000>; + console-size = <0x10000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + }; }; }; @@ -130,11 +178,6 @@ status = "okay"; }; -&peripheral_region { - reg = <0x0 0x7400000 0x0 0x1c00000>; - no-map; -}; - &pm8994_spmi_regulators { VDD_APC0: s8 { regulator-min-microvolt = <680000>; @@ -153,7 +196,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_l1-supply = <&pm8994_s7>; @@ -363,7 +406,7 @@ pm8994_lvs2: lvs2 {}; }; - pmi8994_regulators: pmi8994-regulators { + pmi8994_regulators: regulators-1 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; vdd_bst_byp-supply = <&vph_pwr>; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 750643763a76..02fc3795dbfd 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. */ #include "msm8994.dtsi" @@ -36,10 +37,6 @@ compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc"; }; -&tcsr_mutex { - compatible = "qcom,sfpb-mutex"; -}; - &timer { interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts index dbfbb77e9ff5..29e79ae0849d 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts @@ -1,16 +1,14 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2015, Huawei Inc. All rights reserved. +/* + * Copyright (c) 2015, Huawei Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. - * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com> + * Copyright (c) 2021-2023, Petr Vorel <petr.vorel@gmail.com> */ /dts-v1/; #include "msm8994.dtsi" -/* Angler's firmware does not report where the memory is allocated */ -/delete-node/ &cont_splash_mem; - / { model = "Huawei Nexus 6P"; compatible = "huawei,angler", "qcom,msm8994"; @@ -27,6 +25,27 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cont_splash_mem: memory@3401000 { + reg = <0 0x03401000 0 0x1000000>; + no-map; + }; + + tzapp_mem: tzapp@4800000 { + reg = <0 0x04800000 0 0x1900000>; + no-map; + }; + + reserved@6300000 { + reg = <0 0x06300000 0 0x700000>; + no-map; + }; + }; }; &blsp1_uart2 { diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index f9d8bd09e074..2861bcdf87b7 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -46,8 +46,6 @@ }; clocks { - compatible = "simple-bus"; - divclk4: divclk4 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -127,98 +125,98 @@ */ uefi_mem: memory@200000 { - reg = <0 0x200000 0 0x100000>; + reg = <0 0x00200000 0 0x100000>; no-map; }; mppark_mem: memory@300000 { - reg = <0 0x300000 0 0x80000>; + reg = <0 0x00300000 0 0x80000>; no-map; }; fbpt_mem: memory@380000 { - reg = <0 0x380000 0 0x1000>; + reg = <0 0x00380000 0 0x1000>; no-map; }; dbg2_mem: memory@381000 { - reg = <0 0x381000 0 0x4000>; + reg = <0 0x00381000 0 0x4000>; no-map; }; capsule_mem: memory@385000 { - reg = <0 0x385000 0 0x1000>; + reg = <0 0x00385000 0 0x1000>; no-map; }; tpmctrl_mem: memory@386000 { - reg = <0 0x386000 0 0x3000>; + reg = <0 0x00386000 0 0x3000>; no-map; }; uefiinfo_mem: memory@389000 { - reg = <0 0x389000 0 0x1000>; + reg = <0 0x00389000 0 0x1000>; no-map; }; reset_mem: memory@389000 { - reg = <0 0x389000 0 0x1000>; + reg = <0 0x00389000 0 0x1000>; no-map; }; resuncached_mem: memory@38e000 { - reg = <0 0x38e000 0 0x72000>; + reg = <0 0x0038e000 0 0x72000>; no-map; }; disp_mem: memory@400000 { - reg = <0 0x400000 0 0x800000>; + reg = <0 0x00400000 0 0x800000>; no-map; }; uefistack_mem: memory@c00000 { - reg = <0 0xc00000 0 0x40000>; + reg = <0 0x00c00000 0 0x40000>; no-map; }; cpuvect_mem: memory@c40000 { - reg = <0 0xc40000 0 0x10000>; + reg = <0 0x00c40000 0 0x10000>; no-map; }; rescached_mem: memory@400000 { - reg = <0 0xc50000 0 0xb0000>; + reg = <0 0x00c50000 0 0xb0000>; no-map; }; tzapps_mem: memory@6500000 { - reg = <0 0x6500000 0 0x500000>; + reg = <0 0x06500000 0 0x500000>; no-map; }; smem_mem: memory@6a00000 { - reg = <0 0x6a00000 0 0x200000>; + reg = <0 0x06a00000 0 0x200000>; no-map; }; hyp_mem: memory@6c00000 { - reg = <0 0x6c00000 0 0x100000>; + reg = <0 0x06c00000 0 0x100000>; no-map; }; tz_mem: memory@6d00000 { - reg = <0 0x6d00000 0 0x160000>; + reg = <0 0x06d00000 0 0x160000>; no-map; }; rfsa_adsp_mem: memory@6e60000 { - reg = <0 0x6e60000 0 0x10000>; + reg = <0 0x06e60000 0 0x10000>; no-map; }; rfsa_mpss_mem: memory@6e70000 { compatible = "qcom,rmtfs-mem"; - reg = <0 0x6e70000 0 0x10000>; + reg = <0 0x06e70000 0 0x10000>; no-map; qcom,client-id = <1>; @@ -229,7 +227,7 @@ * MPSS_EFS / SBL */ mba_mem: memory@6e80000 { - reg = <0 0x6e80000 0 0x180000>; + reg = <0 0x06e80000 0 0x180000>; no-map; }; @@ -239,33 +237,33 @@ */ mpss_mem: memory@7000000 { - reg = <0 0x7000000 0 0x5a00000>; + reg = <0 0x07000000 0 0x5a00000>; no-map; }; adsp_mem: memory@ca00000 { - reg = <0 0xca00000 0 0x1800000>; + reg = <0 0x0ca00000 0 0x1800000>; no-map; }; venus_mem: memory@e200000 { - reg = <0 0xe200000 0 0x500000>; + reg = <0 0x0e200000 0 0x500000>; no-map; }; pil_metadata_mem: memory@e700000 { - reg = <0 0xe700000 0 0x4000>; + reg = <0 0x0e700000 0 0x4000>; no-map; }; memory@e704000 { - reg = <0 0xe704000 0 0x7fc000>; + reg = <0 0x0e704000 0 0x7fc000>; no-map; }; /* Peripheral Image loader region end */ cnss_mem: memory@ef00000 { - reg = <0 0xef00000 0 0x300000>; + reg = <0 0x0ef00000 0 0x300000>; no-map; }; }; @@ -542,8 +540,7 @@ }; &pmi8994_spmi_regulators { - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; + vdd_gfx: s2 { regulator-min-microvolt = <980000>; regulator-max-microvolt = <980000>; }; @@ -551,7 +548,7 @@ &rpm_requests { /* These values were taken from the original firmware ACPI tables */ - pm8994_regulators: pm8994-regulators { + pm8994_regulators: regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -835,7 +832,7 @@ vreg_lvs2a_1p8: lvs2 { }; }; - pmi8994_regulators: pmi8994-regulators { + pmi8994_regulators: regulators-1 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -881,28 +878,28 @@ }; &tlmm { - grip_default: grip-default { + grip_default: grip-default-state { pins = "gpio39"; function = "gpio"; drive-strength = <6>; bias-pull-down; }; - grip_sleep: grip-sleep { + grip_sleep: grip-sleep-state { pins = "gpio39"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - hall_front_default: hall-front-default { + hall_front_default: hall-front-default-state { pins = "gpio42"; function = "gpio"; drive-strength = <2>; bias-disable; }; - hall_back_default: hall-back-default { + hall_back_default: hall-back-default-state { pins = "gpio75"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index ff60b7004d26..9dbde79f26a2 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -163,7 +163,7 @@ * mainline Linux. */ &cont_splash_mem { - reg = <0 0x3401000 0 0x2200000>; + reg = <0 0x03401000 0 0x2200000>; }; &pmi8994_spmi_regulators { @@ -173,8 +173,7 @@ * power domain.. which still isn't enough and forces us to bind * OXILI_CX and OXILI_GX together! */ - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; + vdd_gfx: s2 { regulator-name = "VDD_GFX"; regulator-min-microvolt = <980000>; regulator-max-microvolt = <980000>; @@ -186,7 +185,7 @@ &rpm_requests { /* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */ - pmi8994_regulators: pmi8994-regulators { + pmi8994_regulators: regulators-0 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -205,7 +204,7 @@ }; }; - pm8994_regulators: pm8994-regulators { + pm8994_regulators: regulators-1 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s3-supply = <&vph_pwr>; @@ -477,15 +476,16 @@ }; &tlmm { - ts_int_active: ts-int-active { + ts_int_active: ts-int-active-state { pins = "gpio42"; + function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; - ts_reset_active: ts-reset-active { + ts_reset_active: ts-reset-active-state { pins = "gpio109"; + function = "gpio"; drive-strength = <2>; bias-disable; output-low; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index ded5b7ceeaf9..bdc3f2ba1755 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -51,6 +52,7 @@ L2_0: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; @@ -87,6 +89,7 @@ L2_1: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; @@ -227,6 +230,11 @@ reg = <0 0xc9400000 0 0x3f00000>; no-map; }; + + reserved@6c00000 { + reg = <0 0x06c00000 0 0x400000>; + no-map; + }; }; smd { @@ -241,7 +249,7 @@ compatible = "qcom,rpm-msm8994"; qcom,smd-channels = "rpm_requests"; - rpmcc: rpmcc { + rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -553,7 +561,6 @@ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - spi-max-frequency = <19200000>; dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; @@ -691,7 +698,6 @@ clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; - spi-max-frequency = <19200000>; dmas = <&blsp2_dma 18>, <&blsp2_dma 19>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; @@ -773,254 +779,255 @@ interrupt-controller; #interrupt-cells = <2>; - blsp1_uart2_default: blsp1-uart2-default { - function = "blsp_uart2"; + blsp1_uart2_default: blsp1-uart2-default-state { pins = "gpio4", "gpio5"; + function = "blsp_uart2"; drive-strength = <16>; bias-disable; }; - blsp1_uart2_sleep: blsp1-uart2-sleep { - function = "gpio"; + blsp1_uart2_sleep: blsp1-uart2-sleep-state { pins = "gpio4", "gpio5"; + function = "gpio"; drive-strength = <2>; bias-pull-down; }; - blsp2_uart2_default: blsp2-uart2-default { + blsp2_uart2_default: blsp2-uart2-default-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; function = "blsp_uart8"; - pins = "gpio45", "gpio46", - "gpio47", "gpio48"; drive-strength = <16>; bias-disable; }; - blsp2_uart2_sleep: blsp2-uart2-sleep { + blsp2_uart2_sleep: blsp2-uart2-sleep-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; function = "gpio"; - pins = "gpio45", "gpio46", - "gpio47", "gpio48"; drive-strength = <2>; bias-disable; }; - i2c1_default: i2c1-default { - function = "blsp_i2c1"; + i2c1_default: i2c1-default-state { pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; - i2c1_sleep: i2c1-sleep { - function = "gpio"; + i2c1_sleep: i2c1-sleep-state { pins = "gpio2", "gpio3"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c2_default: i2c2-default { - function = "blsp_i2c2"; + i2c2_default: i2c2-default-state { pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; - i2c2_sleep: i2c2-sleep { - function = "gpio"; + i2c2_sleep: i2c2-sleep-state { pins = "gpio6", "gpio7"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c4_default: i2c4-default { - function = "blsp_i2c4"; + i2c4_default: i2c4-default-state { pins = "gpio19", "gpio20"; + function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; - i2c4_sleep: i2c4-sleep { - function = "gpio"; + i2c4_sleep: i2c4-sleep-state { pins = "gpio19", "gpio20"; + function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; - i2c5_default: i2c5-default { - function = "blsp_i2c5"; + i2c5_default: i2c5-default-state { pins = "gpio23", "gpio24"; + function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; - i2c5_sleep: i2c5-sleep { - function = "gpio"; + i2c5_sleep: i2c5-sleep-state { pins = "gpio23", "gpio24"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c6_default: i2c6-default { - function = "blsp_i2c6"; + i2c6_default: i2c6-default-state { pins = "gpio28", "gpio27"; + function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; - i2c6_sleep: i2c6-sleep { - function = "gpio"; + i2c6_sleep: i2c6-sleep-state { pins = "gpio28", "gpio27"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c7_default: i2c7-default { - function = "blsp_i2c7"; + i2c7_default: i2c7-default-state { pins = "gpio44", "gpio43"; + function = "blsp_i2c7"; drive-strength = <2>; bias-disable; }; - i2c7_sleep: i2c7-sleep { - function = "gpio"; + i2c7_sleep: i2c7-sleep-state { pins = "gpio44", "gpio43"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp2_spi10_default: blsp2-spi10-default { - default { - function = "blsp_spi10"; + blsp2_spi10_default: blsp2-spi10-default-state { + default-pins { pins = "gpio53", "gpio54", "gpio55"; + function = "blsp_spi10"; drive-strength = <10>; bias-pull-down; }; - cs { + + cs-pins { + pins = "gpio67"; function = "gpio"; - pins = "gpio55"; drive-strength = <2>; bias-disable; }; }; - blsp2_spi10_sleep: blsp2-spi10-sleep { + blsp2_spi10_sleep: blsp2-spi10-sleep-state { pins = "gpio53", "gpio54", "gpio55"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c11_default: i2c11-default { - function = "blsp_i2c11"; + i2c11_default: i2c11-default-state { pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; drive-strength = <2>; bias-disable; }; - i2c11_sleep: i2c11-sleep { - function = "gpio"; + i2c11_sleep: i2c11-sleep-state { pins = "gpio83", "gpio84"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp1_spi1_default: blsp1-spi1-default { - default { - function = "blsp_spi1"; + blsp1_spi1_default: blsp1-spi1-default-state { + default-pins { pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; drive-strength = <10>; bias-pull-down; }; - cs { - function = "gpio"; + + cs-pins { pins = "gpio8"; + function = "gpio"; drive-strength = <2>; bias-disable; }; }; - blsp1_spi1_sleep: blsp1-spi1-sleep { + blsp1_spi1_sleep: blsp1-spi1-sleep-state { pins = "gpio0", "gpio1", "gpio3"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - sdc1_clk_on: clk-on { + sdc1_clk_on: clk-on-state { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - sdc1_clk_off: clk-off { + sdc1_clk_off: clk-off-state { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - sdc1_cmd_on: cmd-on { + sdc1_cmd_on: cmd-on-state { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <8>; }; - sdc1_cmd_off: cmd-off { + sdc1_cmd_off: cmd-off-state { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - sdc1_data_on: data-on { + sdc1_data_on: data-on-state { pins = "sdc1_data"; bias-pull-up; drive-strength = <8>; }; - sdc1_data_off: data-off { + sdc1_data_off: data-off-state { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - sdc1_rclk_on: rclk-on { + sdc1_rclk_on: rclk-on-state { pins = "sdc1_rclk"; bias-pull-down; }; - sdc1_rclk_off: rclk-off { + sdc1_rclk_off: rclk-off-state { pins = "sdc1_rclk"; bias-pull-down; }; - sdc2_clk_on: sdc2-clk-on { + sdc2_clk_on: sdc2-clk-on-state { pins = "sdc2_clk"; bias-disable; drive-strength = <10>; }; - sdc2_clk_off: sdc2-clk-off { + sdc2_clk_off: sdc2-clk-off-state { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - sdc2_cmd_on: sdc2-cmd-on { + sdc2_cmd_on: sdc2-cmd-on-state { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - sdc2_cmd_off: sdc2-cmd-off { + sdc2_cmd_off: sdc2-cmd-off-state { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - sdc2_data_on: sdc2-data-on { + sdc2_data_on: sdc2-data-on-state { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; - sdc2_data_off: sdc2-data-off { + sdc2_data_off: sdc2-data-off-state { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi new file mode 100644 index 000000000000..2adadc1e5b7c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi @@ -0,0 +1,801 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com> + */ + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include "pmi8996.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd9335.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp2_uart2; + }; + + battery: battery { + compatible = "simple-battery"; + + constant-charge-current-max-microamp = <3000000>; + voltage-min-design-microvolt = <3400000>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + clocks { + div1_mclk: div1-clk { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_mclk>; + #clock-cells = <0>; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; + }; + + divclk4: div4-clk { + compatible = "fixed-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + }; + }; + + reserved-memory { + ramoops@ac000000 { + compatible = "ramoops"; + reg = <0 0xac000000 0 0x200000>; + record-size = <0x20000>; + console-size = <0x100000>; + pmsg-size = <0x80000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; + + wlan_en: wlan-en-regulator { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 GPIO_ACTIVE_HIGH>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + tfa9890_amp: audio-codec@36 { + compatible = "nxp,tfa9890"; + reg = <0x36>; + #sound-dai-cells = <0>; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + bq27541: fuel-gauge@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + }; +}; + +&blsp1_uart2 { + label = "BT-UART"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "qcom,qca6174-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_gpios>; + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; + +&blsp2_i2c1 { + status = "okay"; +}; + +&blsp2_i2c6 { + status = "okay"; + + synaptics_rmi4_i2c: touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touch_default>; + pinctrl-1 = <&touch_suspend>; + vdd-supply = <&vreg_l22a_3p0>; + vio-supply = <&vreg_s4a_1p8>; + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <122>; + }; + }; +}; + +&blsp2_uart2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; + status = "okay"; +}; + +&camss { + vdda-supply = <&vreg_l2a_1p25>; +}; + +&dsi0 { + vdda-supply = <&vreg_l2a_1p25>; + vcca-supply = <&vreg_l22a_3p0>; + status = "okay"; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vcca-supply = <&vreg_l28a_0p925>; + status = "okay"; +}; + +&hsusb_phy1 { + vdd-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + status = "okay"; +}; + +&hsusb_phy2 { + vdd-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + status = "okay"; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&mss_pil { + pll-supply = <&vreg_l12a_1p8>; +}; + +&pcie0 { + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; + status = "okay"; +}; + +&pcie_phy { + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + status = "okay"; +}; + +&pm8994_gpios { + bt_en_gpios: bt-en-gpios-state { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + + wlan_en_gpios: wlan-en-gpios-state { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + + audio_mclk: divclk1-state { + pins = "gpio15"; + function = PMIC_GPIO_FUNC_FUNC1; + power-source = <PM8994_GPIO_S4>; + }; + + divclk4_pin_a: divclk4-state { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = <PM8994_GPIO_S4>; + }; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + + s9 { + qcom,saw-slave; + }; + + s10 { + qcom,saw-slave; + }; + + s11 { + qcom,saw-leader; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1140000>; + regulator-max-step-microvolt = <150000>; + regulator-always-on; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2 { + regulator-name = "vdd-gfx"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <1230000>; + }; +}; + +&q6asmdai { + #address-cells = <1>; + #size-cells = <0>; + + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + vreg_s7a_0p8: s7 { + regulator-name = "vreg_s7a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-allow-set-load; + }; + + vreg_l3a_1p1: l3 { + regulator-name = "vreg_l3a_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l7a_1p8: l7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + vreg_l17a_2p6: l17 { + regulator-name = "vreg_l17a_2p6"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + }; + + vreg_l18a_3p3: l18 { + regulator-name = "vreg_l18a_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l19a_3p0: l19 { + regulator-name = "vreg_l19a_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + regulator-always-on; + }; + + vreg_l27a_1p2: l27 { + regulator-name = "vreg_l27a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "OnePlus3"; + audio-routing = "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "MIC BIAS2", "Headset Mic", + "AMIC4", "MIC BIAS1", + "MIC BIAS1", "Primary Mic", + "AMIC5", "MIC BIAS3", + "MIC BIAS3", "Noise Mic"; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + mm4-dai-link { + link-name = "MultiMedia4"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; + }; + }; + + mm5-dai-link { + link-name = "MultiMedia5"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>; + }; + }; + + mm6-dai-link { + link-name = "MultiMedia6"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>; + }; + }; + + mm7-dai-link { + link-name = "MultiMedia7"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA7>; + }; + }; + + mm8-dai-link { + link-name = "MultiMedia8"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA8>; + }; + }; + + mm9-dai-link { + link-name = "MultiMedia9"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA9>; + }; + }; + + mm10-dai-link { + link-name = "MultiMedia10"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA10>; + }; + }; + + mm11-dai-link { + link-name = "MultiMedia11"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA11>; + }; + }; + + mm12-dai-link { + link-name = "MultiMedia12"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA12>; + }; + }; + + mm13-dai-link { + link-name = "MultiMedia13"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA13>; + }; + }; + + mm14-dai-link { + link-name = "MultiMedia14"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA14>; + }; + }; + + mm15-dai-link { + link-name = "MultiMedia15"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA15>; + }; + }; + + mm16-dai-link { + link-name = "MultiMedia16"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA16>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF4_PB>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 AIF1_CAP>; + }; + }; + + speaker-dai-link { + link-name = "Speaker"; + + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + + codec { + sound-dai = <&tfa9890_amp>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <81 4>; + + mdss_dsi_active: mdss-dsi-active-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_dsi_suspend: mdss-dsi-suspend-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_active: mdss-te-active-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_suspend: mdss-te-suspend-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + touch_default: touch-default-state { + pins = "gpio89", "gpio125", "gpio49"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + touch_suspend: touch-suspend-state { + pins = "gpio89", "gpio125", "gpio49"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&ufsphy { + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vddp-ref-clk-supply = <&vreg_l25a_1p2>; + + status = "okay"; +}; + +&ufshc { + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + + maximum-speed = "high-speed"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts new file mode 100644 index 000000000000..dfe75119b8d2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com> + */ + +/dts-v1/; + +#include "msm8996-oneplus-common.dtsi" + +/ { + model = "OnePlus 3"; + compatible = "oneplus,oneplus3", "qcom,msm8996"; + chassis-type = "handset"; + qcom,board-id = <8 0 15801 15>, <8 0 15801 16>; + qcom,msm-id = <246 0x30001>; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/oneplus3/adsp.mbn"; + status = "okay"; +}; + +&battery { + charge-full-design-microamp-hours = <3000000>; + voltage-max-design-microvolt = <4350000>; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/msm8996/oneplus3/mba.mbn", + "qcom/msm8996/oneplus3/modem.mbn"; + status = "okay"; +}; + +&slpi_pil { + firmware-name = "qcom/msm8996/oneplus3/slpi.mbn"; + status = "okay"; +}; + +&venus { + firmware-name = "qcom/msm8996/oneplus3/venus.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts new file mode 100644 index 000000000000..51fce65e89f1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com> + */ + +/dts-v1/; + +#include "msm8996-oneplus-common.dtsi" + +/ { + model = "OnePlus 3T"; + compatible = "oneplus,oneplus3t", "qcom,msm8996"; + chassis-type = "handset"; + qcom,board-id = <8 0 15811 26>, + <8 0 15811 27>, + <8 0 15811 28>; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/oneplus3t/adsp.mbn"; + status = "okay"; +}; + +&battery { + charge-full-design-microamp-hours = <3400000>; + voltage-max-design-microvolt = <4400000>; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/msm8996/oneplus3t/mba.mbn", + "qcom/msm8996/oneplus3t/modem.mbn"; + status = "okay"; +}; + +&slpi_pil { + firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn"; + status = "okay"; +}; + +&venus { + firmware-name = "qcom/msm8996/oneplus3t/venus.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index ca7c8d2e1d3d..7f4d493a55ff 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -24,11 +24,7 @@ qcom,board-id = <8 0>; chosen { - /* - * Due to an unknown-for-a-few-years regression, - * SDHCI only works on MSM8996 in PIO (lame) mode. - */ - bootargs = "sdhci.debug_quirks=0x40 sdhci.debug_quirks2=0x4 maxcpus=2"; + bootargs = "maxcpus=2"; }; reserved-memory { @@ -104,8 +100,8 @@ }; &blsp1_i2c3 { - status = "okay"; clock-frequency = <355000>; + status = "okay"; tof_sensor: vl53l0x@29 { compatible = "st,vl53l0x"; @@ -118,15 +114,15 @@ }; &blsp2_i2c5 { - status = "okay"; clock-frequency = <355000>; + status = "okay"; /* FUSB301 USB-C controller */ }; &blsp2_i2c6 { - status = "okay"; clock-frequency = <355000>; + status = "okay"; synaptics@2c { compatible = "syna,rmi4-i2c"; @@ -183,11 +179,10 @@ }; &hsusb_phy1 { - status = "okay"; - vdd-supply = <&pm8994_l28>; vdda-pll-supply = <&pm8994_l12>; vdda-phy-dpdm-supply = <&pm8994_l24>; + status = "okay"; }; &mmcc { @@ -195,18 +190,17 @@ }; &pcie0 { - status = "okay"; perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&pm8994_l28>; + status = "okay"; }; &pcie_phy { - status = "okay"; - vdda-phy-supply = <&pm8994_l28>; vdda-pll-supply = <&pm8994_l12>; + status = "okay"; }; &pm8994_gpios { @@ -478,8 +472,8 @@ }; &pm8994_resin { - status = "okay"; linux,code = <KEY_VOLUMEUP>; + status = "okay"; }; &pmi8994_gpios { @@ -623,13 +617,13 @@ }; &pmi8994_wled { - status = "okay"; default-brightness = <512>; qcom,num-strings = <3>; + status = "okay"; }; &rpm_requests { - pm8994-regulators { + regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -825,21 +819,18 @@ }; &sdhc1 { - /* eMMC doesn't seem to cooperate even in PIO mode.. */ - status = "disabled"; - vmmc-supply = <&pm8994_l20>; vqmmc-supply = <&pm8994_s4>; mmc-hs400-1_8v; mmc-hs200-1_8v; + status = "okay"; }; &sdhc2 { - status = "okay"; - cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; vmmc-supply = <&pm8994_l21>; vqmmc-supply = <&pm8994_l13>; + status = "okay"; }; &tlmm { @@ -847,28 +838,28 @@ pinctrl-0 = <&sw_service_gpio>; pinctrl-names = "default"; - disp_reset_n_gpio: disp-reset-n { + disp_reset_n_gpio: disp-reset-n-state { pins = "gpio8"; function = "gpio"; drive-strength = <2>; bias-disable; }; - mdp_vsync_p_gpio: mdp-vsync-p { + mdp_vsync_p_gpio: mdp-vsync-p-state { pins = "gpio10"; function = "mdp_vsync"; drive-strength = <2>; bias-disable; }; - sw_service_gpio: sw-service-gpio { + sw_service_gpio: sw-service-gpio-state { pins = "gpio16"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; - usb_detect: usb-detect { + usb_detect: usb-detect-state { pins = "gpio25"; function = "gpio"; drive-strength = <2>; @@ -876,7 +867,7 @@ output-high; }; - uim_detect_en: uim-detect-en { + uim_detect_en: uim-detect-en-state { pins = "gpio29"; function = "gpio"; drive-strength = <2>; @@ -884,14 +875,14 @@ output-high; }; - tray_det_pin: tray-det { + tray_det_pin: tray-det-state { pins = "gpio40"; function = "gpio"; drive-strength = <2>; bias-disable; }; - tp_vddio_en: tp-vddio-en { + tp_vddio_en: tp-vddio-en-state { pins = "gpio50"; function = "gpio"; drive-strength = <2>; @@ -899,7 +890,7 @@ output-high; }; - lcd_vddio_en: lcd-vddio-en { + lcd_vddio_en: lcd-vddio-en-state { pins = "gpio51"; function = "gpio"; drive-strength = <2>; @@ -907,15 +898,14 @@ output-low; }; - wl_host_wake: wl-host-wake { + wl_host_wake: wl-host-wake-state { pins = "gpio79"; function = "gpio"; drive-strength = <2>; bias-pull-down; - input-high; }; - wl_reg_on: wl-reg-on { + wl_reg_on: wl-reg-on-state { pins = "gpio84"; function = "gpio"; drive-strength = <2>; @@ -923,20 +913,20 @@ output-low; }; - ts_reset_n: ts-rst-n { + ts_reset_n: ts-rst-n-state { pins = "gpio89"; function = "gpio"; drive-strength = <2>; }; - touch_int_n: touch-int-n { + touch_int_n: touch-int-n-state { pins = "gpio125"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; - touch_int_sleep: touch-int-sleep { + touch_int_sleep: touch-int-sleep-state { pins = "gpio125"; function = "gpio"; drive-strength = <2>; @@ -944,18 +934,15 @@ }; }; -/* - * For reasons that are currently unknown (but probably related to fusb301), USB takes about - * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should. - */ &usb3 { - status = "okay"; qcom,select-utmi-as-pipe-clk; + status = "okay"; }; &usb3_dwc3 { extcon = <&usb3_id>; dr_mode = "peripheral"; + maximum-speed = "high-speed"; phys = <&hsusb_phy1>; phy-names = "usb2-phy"; snps,hird-threshold = /bits/ 8 <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi index 5728583af41e..929bdcd45d02 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi @@ -19,7 +19,7 @@ * features get enabled upstream. */ -gpu_opp_table_3_0: gpu-opp-table-30 { +gpu_opp_table_3_0: opp-table-gpu30 { compatible = "operating-points-v2"; opp-624000000 { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 77819186086a..1ce5df0a3405 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -3,9 +3,6 @@ * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com> */ -/dts-v1/; - -#include "msm8996.dtsi" #include "pm8994.dtsi" #include "pmi8994.dtsi" #include <dt-bindings/input/input.h> @@ -15,8 +12,6 @@ / { clocks { - compatible = "simple-bus"; - divclk1_cdc: divclk1 { compatible = "gpio-gate-clock"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>; @@ -232,7 +227,7 @@ status = "okay"; label = "QCA_UART"; - bluetooth: qca6174a { + bluetooth: bluetooth { compatible = "qcom,qca6174-bt"; enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; @@ -340,6 +335,52 @@ }; }; +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&divclk1_cdc>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-vbat-supply = <&vph_pwr>; + vdd-micbias-supply = <&vph_pwr_bbyp>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + &slpi_pil { status = "okay"; @@ -398,22 +439,8 @@ status = "okay"; }; -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&divclk1_cdc>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-vbat-supply = <&vph_pwr>; - vdd-micbias-supply = <&vph_pwr_bbyp>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; - &rpm_requests { - pm8994-regulators { + regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -598,7 +625,7 @@ }; }; - pmi8994-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -694,35 +721,35 @@ }; &tlmm { - mdss_dsi_default: mdss_dsi_default { + mdss_dsi_default: mdss-dsi-default-state { pins = "gpio8"; function = "gpio"; drive-strength = <8>; bias-disable; }; - mdss_dsi_sleep: mdss_dsi_sleep { + mdss_dsi_sleep: mdss-dsi-sleep-state { pins = "gpio8"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - mdss_te_default: mdss_te_default { + mdss_te_default: mdss-te-default-state { pins = "gpio10"; function = "mdp_vsync"; drive-strength = <2>; bias-pull-down; }; - mdss_te_sleep: mdss_te_sleep { + mdss_te_sleep: mdss-te-sleep-state { pins = "gpio10"; function = "mdp_vsync"; drive-strength = <2>; bias-pull-down; }; - nfc_default: nfc_default { + nfc_default: nfc-default-state { pins = "gpio12", "gpio21"; function = "gpio"; drive-strength = <16>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index 4e5264f4116a..100123d51494 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include "msm8996.dtsi" #include "msm8996-xiaomi-common.dtsi" #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -53,7 +54,7 @@ reg = <0x30>; #address-cells = <1>; #size-cells = <0>; - enable-gpio = <&pm8994_gpios 7 1>; + enable-gpios = <&pm8994_gpios 7 1>; clock-mode = /bits/8 <2>; label = "button-backlight"; @@ -61,14 +62,14 @@ reg = <0>; chan-name = "button-backlight"; led-cur = /bits/ 8 <0x32>; - max-cur = /bits/ 8 <0xC8>; + max-cur = /bits/ 8 <0xc8>; }; led@1 { reg = <0>; chan-name = "button-backlight1"; led-cur = /bits/ 8 <0x32>; - max-cur = /bits/ 8 <0xC8>; + max-cur = /bits/ 8 <0xc8>; }; }; }; @@ -219,7 +220,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { vreg_l17a_2p8: l17 { regulator-name = "vreg_l17a_2p8"; regulator-min-microvolt = <2500000>; @@ -445,28 +446,28 @@ "RFFE1_DATA", /* GPIO_148 */ "RFFE1_CLK"; /* GPIO_149 */ - touchscreen_default: touchscreen_default { + touchscreen_default: touchscreen-default-state { pins = "gpio89", "gpio125"; function = "gpio"; drive-strength = <10>; bias-pull-up; }; - touchscreen_sleep: touchscreen_sleep { + touchscreen_sleep: touchscreen-sleep-state { pins = "gpio89", "gpio125"; function = "gpio"; drive-strength = <2>; bias-disable; }; - vibrator_default: vibrator_default { + vibrator_default: vibrator-default-state { pins = "gpio93"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - vibrator_sleep: vibrator_sleep { + vibrator_sleep: vibrator-sleep-state { pins = "gpio93"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c0a2baffa49d..30257c07e127 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -52,8 +53,9 @@ #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; + compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -82,8 +84,9 @@ #cooling-cells = <2>; next-level-cache = <&L2_1>; L2_1: l2-cache { - compatible = "cache"; - cache-level = <2>; + compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -144,82 +147,92 @@ /* Nominal fmax for now */ opp-307200000 { opp-hz = /bits/ 64 <307200000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-422400000 { opp-hz = /bits/ 64 <422400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-480000000 { opp-hz = /bits/ 64 <480000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-556800000 { opp-hz = /bits/ 64 <556800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-652800000 { opp-hz = /bits/ 64 <652800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-729600000 { opp-hz = /bits/ 64 <729600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-844800000 { opp-hz = /bits/ 64 <844800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-960000000 { opp-hz = /bits/ 64 <960000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1036800000 { opp-hz = /bits/ 64 <1036800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1113600000 { opp-hz = /bits/ 64 <1113600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1190400000 { opp-hz = /bits/ 64 <1190400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1228800000 { opp-hz = /bits/ 64 <1228800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1324800000 { opp-hz = /bits/ 64 <1324800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xd>; + clock-latency-ns = <200000>; + }; + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-supported-hw = <0x2>; clock-latency-ns = <200000>; }; opp-1401600000 { opp-hz = /bits/ 64 <1401600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xd>; clock-latency-ns = <200000>; }; opp-1478400000 { opp-hz = /bits/ 64 <1478400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x9>; + clock-latency-ns = <200000>; + }; + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-supported-hw = <0x04>; clock-latency-ns = <200000>; }; opp-1593600000 { opp-hz = /bits/ 64 <1593600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x9>; clock-latency-ns = <200000>; }; }; @@ -232,127 +245,137 @@ /* Nominal fmax for now */ opp-307200000 { opp-hz = /bits/ 64 <307200000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-403200000 { opp-hz = /bits/ 64 <403200000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-480000000 { opp-hz = /bits/ 64 <480000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-556800000 { opp-hz = /bits/ 64 <556800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-652800000 { opp-hz = /bits/ 64 <652800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-729600000 { opp-hz = /bits/ 64 <729600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-806400000 { opp-hz = /bits/ 64 <806400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-883200000 { opp-hz = /bits/ 64 <883200000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-940800000 { opp-hz = /bits/ 64 <940800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1036800000 { opp-hz = /bits/ 64 <1036800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1113600000 { opp-hz = /bits/ 64 <1113600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1190400000 { opp-hz = /bits/ 64 <1190400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1248000000 { opp-hz = /bits/ 64 <1248000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1324800000 { opp-hz = /bits/ 64 <1324800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1401600000 { opp-hz = /bits/ 64 <1401600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1478400000 { opp-hz = /bits/ 64 <1478400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1555200000 { opp-hz = /bits/ 64 <1555200000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1632000000 { opp-hz = /bits/ 64 <1632000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1708800000 { opp-hz = /bits/ 64 <1708800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1785600000 { opp-hz = /bits/ 64 <1785600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + }; + opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-supported-hw = <0xe>; clock-latency-ns = <200000>; }; opp-1824000000 { opp-hz = /bits/ 64 <1824000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x1>; + clock-latency-ns = <200000>; + }; + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-supported-hw = <0x4>; clock-latency-ns = <200000>; }; opp-1920000000 { opp-hz = /bits/ 64 <1920000000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; opp-1996800000 { opp-hz = /bits/ 64 <1996800000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; opp-2073600000 { opp-hz = /bits/ 64 <2073600000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; opp-2150400000 { opp-hz = /bits/ 64 <2150400000>; - opp-supported-hw = <0x77>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; }; @@ -441,6 +464,12 @@ reg = <0x0 0x91500000 0x0 0x200000>; no-map; }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; + size = <0x0 0x4000>; + no-map; + }; }; rpm-glink { @@ -456,7 +485,7 @@ compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; - rpmcc: qcom,rpmcc { + rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; #clock-cells = <1>; clocks = <&xo_board>; @@ -692,14 +721,16 @@ #power-domain-cells = <1>; reg = <0x00300000 0x90000>; - clocks = <&rpmcc RPM_SMD_BB_CLK1>, + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&rpmcc RPM_SMD_LN_BB_CLK>, <&sleep_clk>, <&pciephy_0>, <&pciephy_1>, <&pciephy_2>, <&ssusb_phy_0>, - <0>, <0>, <0>; + <&ufsphy_lane 0>, + <&ufsphy_lane 1>, + <&ufsphy_lane 2>; clock-names = "cxo", "cxo2", "sleep_clk", @@ -809,9 +840,11 @@ compatible = "qcom,msm8996-a2noc"; reg = <0x00583000 0x7000>; #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; + clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi"; clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_UFS_AXI_CLK>; }; mnoc: interconnect@5a4000 { @@ -860,9 +893,9 @@ <&gcc GPLL0>, <&dsi0_phy 1>, <&dsi0_phy 0>, - <0>, - <0>, - <0>; + <&dsi1_phy 1>, + <&dsi1_phy 0>, + <&hdmi_phy>; clock-names = "xo", "gcc_mmss_noc_cfg_ahb_clk", "gpll0", @@ -883,7 +916,7 @@ <825000000>; }; - mdss: mdss@900000 { + mdss: display-subsystem@900000 { compatible = "qcom,mdss"; reg = <0x00900000 0x1000>, @@ -909,8 +942,8 @@ status = "disabled"; - mdp: mdp@901000 { - compatible = "qcom,mdp5"; + mdp: display-controller@901000 { + compatible = "qcom,msm8996-mdp5", "qcom,mdp5"; reg = <0x00901000 0x90000>; reg-names = "mdp_phys"; @@ -968,7 +1001,8 @@ }; dsi0: dsi@994000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,msm8996-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0x00994000 0x400>; reg-names = "dsi_ctrl"; @@ -993,7 +1027,6 @@ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; phys = <&dsi0_phy>; - phy-names = "dsi"; status = "disabled"; #address-cells = <1>; @@ -1018,7 +1051,7 @@ }; }; - dsi0_phy: dsi-phy@994400 { + dsi0_phy: phy@994400 { compatible = "qcom,dsi-phy-14nm"; reg = <0x00994400 0x100>, <0x00994500 0x300>, @@ -1030,13 +1063,14 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "ref"; status = "disabled"; }; dsi1: dsi@996000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,msm8996-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0x00996000 0x400>; reg-names = "dsi_ctrl"; @@ -1061,7 +1095,6 @@ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; phys = <&dsi1_phy>; - phy-names = "dsi"; status = "disabled"; #address-cells = <1>; @@ -1086,7 +1119,7 @@ }; }; - dsi1_phy: dsi-phy@996400 { + dsi1_phy: phy@996400 { compatible = "qcom,dsi-phy-14nm"; reg = <0x00996400 0x100>, <0x00996500 0x300>, @@ -1098,7 +1131,7 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "ref"; status = "disabled"; }; @@ -1145,7 +1178,7 @@ }; }; - hdmi_phy: hdmi-phy@9a0600 { + hdmi_phy: phy@9a0600 { #phy-cells = <0>; compatible = "qcom,hdmi-phy-8996"; reg = <0x009a0600 0x1c4>, @@ -1213,37 +1246,37 @@ compatible = "operating-points-v2"; /* - * 624Mhz and 560Mhz are only available on speed - * bin (1 << 0). All the rest are available on - * all bins of the hardware + * 624Mhz is only available on speed bins 0 and 3. + * 560Mhz is only available on speed bins 0, 2 and 3. + * All the rest are available on all bins of the hardware. */ opp-624000000 { opp-hz = /bits/ 64 <624000000>; - opp-supported-hw = <0x01>; + opp-supported-hw = <0x09>; }; opp-560000000 { opp-hz = /bits/ 64 <560000000>; - opp-supported-hw = <0x01>; + opp-supported-hw = <0x0d>; }; opp-510000000 { opp-hz = /bits/ 64 <510000000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-401800000 { opp-hz = /bits/ 64 <401800000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-315000000 { opp-hz = /bits/ 64 <315000000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-214000000 { opp-hz = /bits/ 64 <214000000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-133000000 { opp-hz = /bits/ 64 <133000000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; }; @@ -1262,15 +1295,15 @@ interrupt-controller; #interrupt-cells = <2>; - blsp1_spi1_default: blsp1-spi1-default { - spi { + blsp1_spi1_default: blsp1-spi1-default-state { + spi-pins { pins = "gpio0", "gpio1", "gpio3"; function = "blsp_spi1"; drive-strength = <12>; bias-disable; }; - cs { + cs-pins { pins = "gpio2"; function = "gpio"; drive-strength = <16>; @@ -1279,42 +1312,56 @@ }; }; - blsp1_spi1_sleep: blsp1-spi1-sleep { + blsp1_spi1_sleep: blsp1-spi1-sleep-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - blsp2_uart2_2pins_default: blsp2-uart1-2pins { + blsp2_uart2_2pins_default: blsp2-uart2-2pins-state { pins = "gpio4", "gpio5"; function = "blsp_uart8"; drive-strength = <16>; bias-disable; }; - blsp2_uart2_2pins_sleep: blsp2-uart1-2pins-sleep { + blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state { pins = "gpio4", "gpio5"; function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp2_i2c2_default: blsp2-i2c2 { + blsp2_i2c2_default: blsp2-i2c2-state { pins = "gpio6", "gpio7"; function = "blsp_i2c8"; drive-strength = <16>; bias-disable; }; - blsp2_i2c2_sleep: blsp2-i2c2-sleep { + blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { pins = "gpio6", "gpio7"; function = "gpio"; drive-strength = <2>; bias-disable; }; - cci0_default: cci0-default { + blsp1_i2c6_default: blsp1-i2c6-state { + pins = "gpio27", "gpio28"; + function = "blsp_i2c6"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { + pins = "gpio27", "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_default: cci0-default-state { pins = "gpio17", "gpio18"; function = "cci_i2c"; drive-strength = <16>; @@ -1322,22 +1369,22 @@ }; camera0_state_on: - camera_rear_default: camera-rear-default { - camera0_mclk: mclk0 { + camera_rear_default: camera-rear-default-state { + camera0_mclk: mclk0-pins { pins = "gpio13"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; - camera0_rst: rst { + camera0_rst: rst-pins { pins = "gpio25"; function = "gpio"; drive-strength = <16>; bias-disable; }; - camera0_pwdn: pwdn { + camera0_pwdn: pwdn-pins { pins = "gpio26"; function = "gpio"; drive-strength = <16>; @@ -1345,7 +1392,7 @@ }; }; - cci1_default: cci1-default { + cci1_default: cci1-default-state { pins = "gpio19", "gpio20"; function = "cci_i2c"; drive-strength = <16>; @@ -1353,22 +1400,22 @@ }; camera1_state_on: - camera_board_default: camera-board-default { - mclk1 { + camera_board_default: camera-board-default-state { + mclk1-pins { pins = "gpio14"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; - pwdn { + pwdn-pins { pins = "gpio98"; function = "gpio"; drive-strength = <16>; bias-disable; }; - rst { + rst-pins { pins = "gpio104"; function = "gpio"; drive-strength = <16>; @@ -1377,22 +1424,22 @@ }; camera2_state_on: - camera_front_default: camera-front-default { - camera2_mclk: mclk2 { + camera_front_default: camera-front-default-state { + camera2_mclk: mclk2-pins { pins = "gpio15"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; - camera2_rst: rst { + camera2_rst: rst-pins { pins = "gpio23"; function = "gpio"; drive-strength = <16>; bias-disable; }; - pwdn { + pwdn-pins { pins = "gpio133"; function = "gpio"; drive-strength = <16>; @@ -1400,22 +1447,22 @@ }; }; - pcie0_state_on: pcie0-state-on { - perst { + pcie0_state_on: pcie0-state-on-state { + perst-pins { pins = "gpio35"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio36"; function = "pci_e0"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio37"; function = "gpio"; drive-strength = <2>; @@ -1423,22 +1470,22 @@ }; }; - pcie0_state_off: pcie0-state-off { - perst { + pcie0_state_off: pcie0-state-off-state { + perst-pins { pins = "gpio35"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio36"; function = "gpio"; drive-strength = <2>; bias-disable; }; - wake { + wake-pins { pins = "gpio37"; function = "gpio"; drive-strength = <2>; @@ -1446,85 +1493,84 @@ }; }; - blsp1_uart2_default: blsp1-uart2-default { + blsp1_uart2_default: blsp1-uart2-default-state { pins = "gpio41", "gpio42", "gpio43", "gpio44"; function = "blsp_uart2"; drive-strength = <16>; bias-disable; }; - blsp1_uart2_sleep: blsp1-uart2-sleep { + blsp1_uart2_sleep: blsp1-uart2-sleep-state { pins = "gpio41", "gpio42", "gpio43", "gpio44"; function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp1_i2c3_default: blsp1-i2c2-default { + blsp1_i2c3_default: blsp1-i2c3-default-state { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; drive-strength = <16>; bias-disable; }; - blsp1_i2c3_sleep: blsp1-i2c2-sleep { + blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { pins = "gpio47", "gpio48"; function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp2_uart3_4pins_default: blsp2-uart2-4pins { + blsp2_uart3_4pins_default: blsp2-uart3-4pins-state { pins = "gpio49", "gpio50", "gpio51", "gpio52"; function = "blsp_uart9"; drive-strength = <16>; bias-disable; }; - blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep { + blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state { pins = "gpio49", "gpio50", "gpio51", "gpio52"; function = "blsp_uart9"; drive-strength = <2>; bias-disable; }; - blsp2_i2c3_default: blsp2-i2c3 { + blsp2_i2c3_default: blsp2-i2c3-state-state { pins = "gpio51", "gpio52"; function = "blsp_i2c9"; drive-strength = <16>; bias-disable; }; - blsp2_i2c3_sleep: blsp2-i2c3-sleep { + blsp2_i2c3_sleep: blsp2-i2c3-sleep-state { pins = "gpio51", "gpio52"; function = "gpio"; drive-strength = <2>; bias-disable; }; - wcd_intr_default: wcd-intr-default{ + wcd_intr_default: wcd-intr-default-state { pins = "gpio54"; function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; - blsp2_i2c1_default: blsp2-i2c1 { + blsp2_i2c1_default: blsp2-i2c1-state { pins = "gpio55", "gpio56"; function = "blsp_i2c7"; drive-strength = <16>; bias-disable; }; - blsp2_i2c1_sleep: blsp2-i2c0-sleep { + blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { pins = "gpio55", "gpio56"; function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp2_i2c5_default: blsp2-i2c5 { + blsp2_i2c5_default: blsp2-i2c5-state { pins = "gpio60", "gpio61"; function = "blsp_i2c11"; drive-strength = <2>; @@ -1533,7 +1579,7 @@ /* Sleep state for BLSP2_I2C5 is missing.. */ - cdc_reset_active: cdc-reset-active { + cdc_reset_active: cdc-reset-active-state { pins = "gpio64"; function = "gpio"; drive-strength = <16>; @@ -1541,7 +1587,7 @@ output-high; }; - cdc_reset_sleep: cdc-reset-sleep { + cdc_reset_sleep: cdc-reset-sleep-state { pins = "gpio64"; function = "gpio"; drive-strength = <16>; @@ -1549,15 +1595,15 @@ output-low; }; - blsp2_spi6_default: blsp2-spi5-default { - spi { + blsp2_spi6_default: blsp2-spi6-default-state { + spi-pins { pins = "gpio85", "gpio86", "gpio88"; function = "blsp_spi12"; drive-strength = <12>; bias-disable; }; - cs { + cs-pins { pins = "gpio87"; function = "gpio"; drive-strength = <16>; @@ -1566,43 +1612,43 @@ }; }; - blsp2_spi6_sleep: blsp2-spi5-sleep { + blsp2_spi6_sleep: blsp2-spi6-sleep-state { pins = "gpio85", "gpio86", "gpio87", "gpio88"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - blsp2_i2c6_default: blsp2-i2c6 { + blsp2_i2c6_default: blsp2-i2c6-state { pins = "gpio87", "gpio88"; function = "blsp_i2c12"; drive-strength = <16>; bias-disable; }; - blsp2_i2c6_sleep: blsp2-i2c6-sleep { + blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { pins = "gpio87", "gpio88"; function = "gpio"; drive-strength = <2>; bias-disable; }; - pcie1_state_on: pcie1-state-on { - perst { + pcie1_state_on: pcie1-on-state { + perst-pins { pins = "gpio130"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio131"; function = "pci_e1"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio132"; function = "gpio"; drive-strength = <2>; @@ -1610,16 +1656,16 @@ }; }; - pcie1_state_off: pcie1-state-off { + pcie1_state_off: pcie1-off-state { /* Perst is missing? */ - clkreq { + clkreq-pins { pins = "gpio131"; function = "gpio"; drive-strength = <2>; bias-disable; }; - wake { + wake-pins { pins = "gpio132"; function = "gpio"; drive-strength = <2>; @@ -1627,22 +1673,22 @@ }; }; - pcie2_state_on: pcie2-state-on { - perst { + pcie2_state_on: pcie2-on-state { + perst-pins { pins = "gpio114"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio115"; function = "pci_e2"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio116"; function = "gpio"; drive-strength = <2>; @@ -1650,16 +1696,16 @@ }; }; - pcie2_state_off: pcie2-state-off { + pcie2_state_off: pcie2-off-state { /* Perst is missing? */ - clkreq { + clkreq-pins { pins = "gpio115"; function = "gpio"; drive-strength = <2>; bias-disable; }; - wake { + wake-pins { pins = "gpio116"; function = "gpio"; drive-strength = <2>; @@ -1667,90 +1713,90 @@ }; }; - sdc1_state_on: sdc1-state-on { - clk { + sdc1_state_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; - rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc1_state_off: sdc1-state-off { - clk { + sdc1_state_off: sdc1-off-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc2_state_on: sdc2-clk-on { - clk { + sdc2_state_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; - sdc2_state_off: sdc2-clk-off { - clk { + sdc2_state_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; @@ -1781,7 +1827,7 @@ #interrupt-cells = <4>; }; - agnoc@0 { + bus@0 { power-domains = <&gcc AGGRE0_NOC_GDSC>; compatible = "simple-pm-bus"; #address-cells = <1>; @@ -1806,8 +1852,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, - <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>, + <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; device_type = "pci"; @@ -1837,7 +1883,6 @@ "cfg", "bus_master", "bus_slave"; - }; pcie1: pcie@608000 { @@ -1860,8 +1905,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, - <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>, + <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; device_type = "pci"; @@ -1911,8 +1956,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>, - <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>, + <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; device_type = "pci"; @@ -1992,13 +2037,13 @@ <0 0>, <0 0>; + interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &cnoc SLAVE_UFS_CFG>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + lanes-per-direction = <1>; #reset-cells = <1>; status = "disabled"; - - ufs_variant { - compatible = "qcom,ufs_variant"; - }; }; ufsphy: phy@627000 { @@ -2019,6 +2064,7 @@ reg = <0x627400 0x12c>, <0x627600 0x200>, <0x627c00 0x1b4>; + #clock-cells = <1>; #phy-cells = <0>; }; }; @@ -2205,9 +2251,9 @@ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; - clocks = <&mmcc GPU_AHB_CLK>, - <&gcc GCC_MMSS_BIMC_GFX_CLK>; - clock-names = "iface", "bus"; + clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>, + <&mmcc GPU_AHB_CLK>; + clock-names = "bus", "iface"; power-domains = <&mmcc GPU_GDSC>; }; @@ -2272,9 +2318,9 @@ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; - clocks = <&mmcc SMMU_MDP_AHB_CLK>, - <&mmcc SMMU_MDP_AXI_CLK>; - clock-names = "iface", "bus"; + clocks = <&mmcc SMMU_MDP_AXI_CLK>, + <&mmcc SMMU_MDP_AHB_CLK>; + clock-names = "bus", "iface"; power-domains = <&mmcc MDSS_GDSC>; }; @@ -2292,9 +2338,9 @@ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; - clocks = <&mmcc SMMU_VIDEO_AHB_CLK>, - <&mmcc SMMU_VIDEO_AXI_CLK>; - clock-names = "iface", "bus"; + clocks = <&mmcc SMMU_VIDEO_AXI_CLK>, + <&mmcc SMMU_VIDEO_AHB_CLK>; + clock-names = "bus", "iface"; #iommu-cells = <1>; status = "okay"; }; @@ -2308,10 +2354,9 @@ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; - clocks = <&mmcc SMMU_VFE_AHB_CLK>, - <&mmcc SMMU_VFE_AXI_CLK>; - clock-names = "iface", - "bus"; + clocks = <&mmcc SMMU_VFE_AXI_CLK>, + <&mmcc SMMU_VFE_AHB_CLK>; + clock-names = "bus", "iface"; #iommu-cells = <1>; }; @@ -2336,9 +2381,9 @@ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>, - <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; - clock-names = "iface", "bus"; + clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>, + <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>; + clock-names = "bus", "iface"; }; slpi_pil: remoteproc@1c00000 { @@ -2430,6 +2475,10 @@ memory-region = <&mpss_mem>; }; + metadata { + memory-region = <&mdata_mem>; + }; + smd-edge { interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; @@ -2912,8 +2961,8 @@ compatible = "qcom,msm8996-apcc"; reg = <0x06400000 0x90000>; - clock-names = "xo"; - clocks = <&rpmcc RPM_SMD_BB_CLK1>; + clock-names = "xo", "sys_apcs_aux"; + clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; #clock-cells = <1>; }; @@ -2957,8 +3006,11 @@ interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy1>, <&ssusb_phy_0>; phy-names = "usb2-phy", "usb3-phy"; + snps,hird-threshold = /bits/ 8 <0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,is-utmi-l1-suspend; + tx-fifo-resize; }; }; @@ -3032,7 +3084,7 @@ clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&rpmcc RPM_SMD_BB_CLK1>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; resets = <&gcc GCC_SDCC1_BCR>; pinctrl-names = "default", "sleep"; @@ -3056,7 +3108,7 @@ clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&rpmcc RPM_SMD_BB_CLK1>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; resets = <&gcc GCC_SDCC2_BCR>; pinctrl-names = "default", "sleep"; @@ -3127,6 +3179,23 @@ status = "disabled"; }; + blsp1_i2c6: i2c@757a000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x757a000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; + dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp2_dma: dma-controller@7584000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07584000 0x2b000>; @@ -3243,7 +3312,7 @@ status = "disabled"; }; - blsp2_spi6: spi@75ba000{ + blsp2_spi6: spi@75ba000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x075ba000 0x600>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -3309,46 +3378,16 @@ qcom,num-ees = <2>; }; - slim_msm: slim@91c0000 { + slim_msm: slim-ngd@91c0000 { compatible = "qcom,slim-ngd-v1.5.0"; - reg = <0x091c0000 0x2C000>; - reg-names = "ctrl"; + reg = <0x091c0000 0x2c000>; interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&slimbam 3>, <&slimbam 4>, - <&slimbam 5>, <&slimbam 6>; - dma-names = "rx", "tx", "tx2", "rx2"; + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; - ngd@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <1>; - - tasha_ifd: tas-ifd { - compatible = "slim217,1a0"; - reg = <0 0>; - }; - - wcd9335: codec@1{ - pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; - pinctrl-names = "default"; - - compatible = "slim217,1a0"; - reg = <1 0>; - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, - <53 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "intr1", "intr2"; - interrupt-controller; - #interrupt-cells = <1>; - reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; - - slim-ifc-dev = <&tasha_ifd>; - - #sound-dai-cells = <1>; - }; - }; + status = "disabled"; }; adsp_pil: remoteproc@9300000 { @@ -3363,7 +3402,7 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - clocks = <&rpmcc RPM_SMD_BB_CLK1>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "xo"; memory-region = <&adsp_mem>; @@ -3383,8 +3422,7 @@ mboxes = <&apcs_glb 8>; qcom,smd-edge = <1>; qcom,remote-pid = <2>; - #address-cells = <1>; - #size-cells = <0>; + apr { power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; compatible = "qcom,apr-v2"; @@ -3393,12 +3431,12 @@ #address-cells = <1>; #size-cells = <0>; - q6core { + service@3 { reg = <APR_SVC_ADSP_CORE>; compatible = "qcom,q6core"; }; - q6afe: q6afe { + q6afe: service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; q6afedai: dais { @@ -3406,13 +3444,13 @@ #address-cells = <1>; #size-cells = <0>; #sound-dai-cells = <1>; - hdmi@1 { + dai@1 { reg = <1>; }; }; }; - q6asm: q6asm { + q6asm: service@7 { compatible = "qcom,q6asm"; reg = <APR_SVC_ASM>; q6asmdai: dais { @@ -3424,7 +3462,7 @@ }; }; - q6adm: q6adm { + q6adm: service@8 { compatible = "qcom,q6adm"; reg = <APR_SVC_ADM>; q6routing: routing { @@ -3433,7 +3471,6 @@ }; }; }; - }; }; @@ -3442,6 +3479,7 @@ reg = <0x09820000 0x1000>; #mbox-cells = <1>; + #clock-cells = <0>; }; timer@9840000 { @@ -3504,10 +3542,17 @@ }; saw3: syscon@9a10000 { - compatible = "qcom,tcsr-msm8996", "syscon"; + compatible = "syscon"; reg = <0x09a10000 0x1000>; }; + cbf: clock-controller@9a11000 { + compatible = "qcom,msm8996-cbf"; + reg = <0x09a11000 0x10000>; + clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; + #clock-cells = <0>; + }; + intc: interrupt-controller@9bc0000 { compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; #interrupt-cells = <3>; @@ -3537,7 +3582,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -3558,7 +3603,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -3579,7 +3624,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -3600,7 +3645,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts index ff4673ee9e81..d18d0b0eda95 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include "msm8996pro.dtsi" #include "msm8996-xiaomi-common.dtsi" #include "pmi8996.dtsi" #include <dt-bindings/sound/qcom,q6afe.h> @@ -12,7 +13,7 @@ / { model = "Xiaomi Mi 5s Plus"; - compatible = "xiaomi,natrium", "qcom,msm8996"; + compatible = "xiaomi,natrium", "qcom,msm8996pro", "qcom,msm8996"; chassis-type = "handset"; qcom,msm-id = <305 0x10000>; qcom,board-id = <47 0>; @@ -164,7 +165,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { vreg_l3a_0p875: l3 { regulator-name = "vreg_l3a_0p875"; regulator-min-microvolt = <850000>; @@ -398,14 +399,14 @@ "RFFE1_DATA", /* GPIO_148 */ "RFFE1_CLK"; /* GPIO_149 */ - touchscreen_default: touchscreen-default { + touchscreen_default: touchscreen-default-state { pins = "gpio89", "gpio125"; function = "gpio"; drive-strength = <10>; bias-pull-up; }; - touchscreen_sleep: touchscreen-sleep { + touchscreen_sleep: touchscreen-sleep-state { pins = "gpio89", "gpio125"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts index 79be5fb1295b..5e3b9130e9c2 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include "msm8996pro.dtsi" #include "msm8996-xiaomi-common.dtsi" #include "pmi8996.dtsi" #include <dt-bindings/sound/qcom,q6afe.h> @@ -13,7 +14,7 @@ / { model = "Xiaomi Mi Note 2"; - compatible = "xiaomi,scorpio", "qcom,msm8996"; + compatible = "xiaomi,scorpio", "qcom,msm8996pro", "qcom,msm8996"; chassis-type = "handset"; qcom,msm-id = <305 0x10000>; qcom,board-id = <34 0>; @@ -216,7 +217,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { vreg_l3a_0p875: l3 { regulator-name = "vreg_l3a_0p875"; regulator-min-microvolt = <850000>; @@ -468,28 +469,28 @@ "RFFE1_DATA", /* GPIO_148 */ "RFFE1_CLK"; /* GPIO_149 */ - touchkey_default: touchkey_default { + touchkey_default: touchkey-default-state { pins = "gpio77"; function = "gpio"; drive-strength = <16>; bias-pull-up; }; - touchkey_sleep: touchkey_sleep { + touchkey_sleep: touchkey-sleep-state { pins = "gpio77"; function = "gpio"; drive-strength = <2>; bias-disable; }; - touchscreen_default: touchscreen_default { + touchscreen_default: touchscreen-default-state { pins = "gpio75", "gpio125"; function = "gpio"; drive-strength = <10>; bias-pull-up; }; - touchscreen_sleep: touchscreen_sleep { + touchscreen_sleep: touchscreen-sleep-state { pins = "gpio75", "gpio125"; function = "gpio"; drive-strength = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi new file mode 100644 index 000000000000..a679a9c0cf99 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include "msm8996.dtsi" + +/ { + /delete-node/ opp-table-cluster0; + /delete-node/ opp-table-cluster1; + + /* + * On MSM8996 Pro the cpufreq driver shifts speed bins into the high + * nibble of supported hw, so speed bin 0 becomes 0x10, speed bin 1 + * becomes 0x20, speed 2 becomes 0x40. + */ + + cluster0_opp: opp-table-cluster0 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-460800000 { + opp-hz = /bits/ 64 <460800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-537600000 { + opp-hz = /bits/ 64 <537600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-614400000 { + opp-hz = /bits/ 64 <614400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-supported-hw = <0x20>; + clock-latency-ns = <200000>; + }; + opp-2188800000 { + opp-hz = /bits/ 64 <2188800000>; + opp-supported-hw = <0x10>; + clock-latency-ns = <200000>; + }; + }; + + cluster1_opp: opp-table-cluster1 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + opp-shared; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-460800000 { + opp-hz = /bits/ 64 <460800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-537600000 { + opp-hz = /bits/ 64 <537600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-614400000 { + opp-hz = /bits/ 64 <614400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1824000000 { + opp-hz = /bits/ 64 <1824000000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-supported-hw = <0x70>; + clock-latency-ns = <200000>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + opp-supported-hw = <0x30>; + clock-latency-ns = <200000>; + }; + opp-2054400000 { + opp-hz = /bits/ 64 <2054400000>; + opp-supported-hw = <0x30>; + clock-latency-ns = <200000>; + }; + opp-2150400000 { + opp-hz = /bits/ 64 <2150400000>; + opp-supported-hw = <0x30>; + clock-latency-ns = <200000>; + }; + opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + opp-supported-hw = <0x10>; + clock-latency-ns = <200000>; + }; + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + opp-supported-hw = <0x10>; + clock-latency-ns = <200000>; + }; + }; +}; + +&gpu_opp_table { + /* + * Unlike CPU opp tables, the GPU driver does not shift speed bins. + * + * 652.8 Mhz is available on speed bin 0 only. + * 624 Mhz and 560 Mhz are available on speed bins 0 and 1. + * All the rest are available on all bins of the hardware (like on + * plain 8996). + */ + + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-supported-hw = <0x01>; + }; + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-supported-hw = <0x03>; + }; + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-supported-hw = <0x03>; + }; + /* The rest is inherited from msm8996 */ +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 7928b8197474..3b7172aa4037 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -35,7 +35,7 @@ }; &blsp1_uart3_on { - rx { + rx-pins { /delete-property/ bias-disable; /* * Configure a pull-up on 45 (RX). This is needed to @@ -46,7 +46,7 @@ bias-pull-up; }; - cts { + cts-pins { /delete-property/ bias-disable; /* * Configure a pull-down on 47 (CTS) to match the pull @@ -137,7 +137,7 @@ }; &rpm_requests { - pm8998-regulators { + regulators-0 { compatible = "qcom,rpm-pm8998-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -357,8 +357,9 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - touchpad: touchpad-pin { + touchpad: touchpad-pin-state { pins = "gpio123"; + function = "gpio"; bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 429ba57e20f7..b35e2d9f428c 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -44,7 +44,7 @@ label = "Keyboard Hall Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; debounce-interval = <15>; - gpio-key,wakeup; + wakeup-source; linux,input-type = <EV_SW>; linux,code = <SW_KEYPAD_SLIDE>; }; @@ -113,16 +113,16 @@ <&cam_snapshot_pin_a>; button-vol-up { label = "Volume Up"; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEUP>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; }; button-camera-snapshot { label = "Camera Snapshot"; - gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA>; debounce-interval = <15>; @@ -130,7 +130,7 @@ button-camera-focus { label = "Camera Focus"; - gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA_FOCUS>; debounce-interval = <15>; @@ -216,7 +216,7 @@ }; &blsp1_uart3_on { - rx { + rx-pins { /delete-property/ bias-disable; /* * Configure a pull-up on 45 (RX). This is needed to @@ -227,7 +227,7 @@ bias-pull-up; }; - cts { + cts-pins { /delete-property/ bias-disable; /* * Configure a pull-down on 47 (CTS) to match the pull @@ -249,7 +249,7 @@ reg = <0x14>; interrupt-parent = <&tlmm>; interrupts = <125 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; AVDD28-supply = <&vreg_l28_3p0>; VDDIO-supply = <&ts_vio_vreg>; pinctrl-names = "active"; @@ -310,15 +310,11 @@ }; &funnel4 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; + /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */ }; &funnel5 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; + /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */ }; &pcie0 { @@ -342,7 +338,7 @@ }; }; -&pm8998_gpio { +&pm8998_gpios { vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; @@ -368,14 +364,9 @@ }; }; -&pm8998_pon { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; - bias-pull-up; - debounce = <15625>; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &qusb2phy { @@ -390,7 +381,7 @@ }; &rpm_requests { - pm8998-regulators { + regulators-0 { compatible = "qcom,rpm-pm8998-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -588,7 +579,7 @@ }; - pmi8998-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8998-regulators"; vdd_bob-supply = <&vph_pwr>; @@ -615,14 +606,14 @@ &tlmm { gpio-reserved-ranges = <0 4>; - mdp_vsync_n: mdp-vsync-n { + mdp_vsync_n: mdp-vsync-n-state { pins = "gpio10"; function = "mdp_vsync_a"; bias-pull-down; drive-strength = <2>; }; - gpio_kb_pins_extra: gpio-kb-pins-extra { + gpio_kb_pins_extra: gpio-kb-pins-extra-state { pins = "gpio21", "gpio32", "gpio33", "gpio114", "gpio128", "gpio129"; function = "gpio"; @@ -630,29 +621,28 @@ bias-pull-up; }; - ts_vio_default: ts-vio-def { + ts_vio_default: ts-vio-def-state { pins = "gpio81"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ts_rst_n: ts-rst-n { + ts_rst_n: ts-rst-n-state { pins = "gpio89"; function = "gpio"; bias-pull-up; drive-strength = <8>; }; - hall_sensor1_default: hall-sensor1-def { + hall_sensor1_default: hall-sensor1-def-state { pins = "gpio124"; function = "gpio"; bias-disable; drive-strength = <2>; - input-enable; }; - ts_int_n: ts-int-n { + ts_int_n: ts-int-n-state { pins = "gpio125"; function = "gpio"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts index cf81c33a9d7e..a105143bee4a 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts @@ -28,8 +28,8 @@ }; &remoteproc_mss { - firmware-name = "qcom/LENOVO/81F1/qcdsp1v28998.mbn", - "qcom/LENOVO/81F1/qcdsp28998.mbn"; + firmware-name = "qcom/msm8998/LENOVO/81F1/qcdsp1v28998.mbn", + "qcom/msm8998/LENOVO/81F1/qcdsp28998.mbn"; }; &sdhc2 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts index a3ca58100aee..453a1c9e9808 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts @@ -46,7 +46,7 @@ }; &blsp1_uart3_on { - rx { + rx-pins { /delete-property/ bias-disable; /* * Configure a pull-up on 45 (RX). This is needed to @@ -57,7 +57,7 @@ bias-pull-up; }; - cts { + cts-pins { /delete-property/ bias-disable; /* * Configure a pull-down on 47 (CTS) to match the pull @@ -124,15 +124,11 @@ }; &funnel4 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; + /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */ }; &funnel5 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; + /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */ }; &pcie0 { @@ -168,7 +164,7 @@ }; &rpm_requests { - pm8998-regulators { + regulators-0 { compatible = "qcom,rpm-pm8998-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -366,7 +362,7 @@ }; - pmi8998-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8998-regulators"; vdd_bob-supply = <&vph_pwr>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts index ef2a88a64d32..fac8b3510cd3 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -22,8 +22,8 @@ pinctrl-names = "default"; pinctrl-0 = <&button_backlight_default>; - button-backlight { - gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + led-keypad-backlight { + gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_WHITE>; function = LED_FUNCTION_KBD_BACKLIGHT; default-state = "off"; @@ -31,13 +31,11 @@ }; }; -&pmi8998_gpio { +&pmi8998_gpios { button_backlight_default: button-backlight-state { - pinconf { - pins = "gpio5"; - function = "normal"; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - }; + pins = "gpio5"; + function = "normal"; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 62bda23791bb..062d56c42385 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -92,7 +92,7 @@ button-vol-down { label = "Volume down"; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <15>; wakeup-source; @@ -100,7 +100,7 @@ button-vol-up { label = "Volume up"; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; wakeup-source; @@ -233,7 +233,7 @@ }; &blsp1_uart3_on { - rx { + rx-pins { /delete-property/ bias-disable; /* * Configure a pull-up on 46 (RX). This is needed to @@ -244,7 +244,7 @@ bias-pull-up; }; - cts { + cts-pins { /delete-property/ bias-disable; /* * Configure a pull-down on 47 (CTS) to match the pull @@ -269,7 +269,7 @@ }; }; -&pm8998_gpio { +&pm8998_gpios { vol_keys_default: vol-keys-state { pins = "gpio5", "gpio6"; function = "normal"; @@ -279,6 +279,10 @@ }; }; +&pmi8998_rradc { + status = "okay"; +}; + &qusb2phy { status = "okay"; @@ -288,7 +292,7 @@ }; &rpm_requests { - pm8998-regulators { + regulators-0 { compatible = "qcom,rpm-pm8998-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -477,7 +481,7 @@ vreg_lvs2a_1p8: lvs2 { }; }; - pmi8998-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8998-regulators"; vdd_bob-supply = <&vph_pwr>; @@ -492,36 +496,35 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - hall_sensor_default: hall-sensor-default { + hall_sensor_default: hall-sensor-default-state { pins = "gpio124"; function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; - ts_int_active: ts-int-active { + ts_int_active: ts-int-active-state { pins = "gpio125"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - ts_reset_active: ts-reset-active { + ts_reset_active: ts-reset-active-state { pins = "gpio89"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - nfc_int_active: nfc-int-active { + nfc_int_active: nfc-int-active-state { pins = "gpio92"; function = "gpio"; drive-strength = <6>; bias-pull-up; }; - nfc_enable_active: nfc-enable-active { + nfc_enable_active: nfc-enable-active-state { pins = "gpio12", "gpio116"; function = "gpio"; drive-strength = <6>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts index 20fe0394a3c1..055b6a643d82 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -20,9 +20,9 @@ regulator-max-microvolt = <1350000>; startup-delay-us = <0>; enable-active-high; - gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>; + gpio = <&pmi8998_gpios 10 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&disp_dvdd_en>; + pinctrl-0 = <&four_k_disp_dcdc_en>; }; }; @@ -37,8 +37,30 @@ qcom,soft-start-us = <200>; }; -&pmi8998_gpio { - disp_dvdd_en: disp-dvdd-en-active-state { +&pm8005_gpios { + gpio-line-names = "EAR_EN", /* GPIO_1 */ + "NC", + "SLB", + "OPTION_1_PM8005"; +}; + +&pmi8998_gpios { + gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */ + "NC", + "NC", + "TYPEC_UUSB_SEL", + "VIB_LDO_EN", + "NC", + "DISPLAY_TYPE_SEL", + "USB_SWITCH_SEL", + "NC", + "4K_DISP_DCDC_EN", /* GPIO_10 */ + "NC", + "DIV_CLK3", + "SPMI_I2C_SEL", + "NC"; + + four_k_disp_dcdc_en: 4k-disp-dcdc-en-state { pins = "gpio10"; function = "normal"; bias-disable; @@ -49,6 +71,159 @@ }; }; +&tlmm { + gpio-line-names = "", /* GPIO_0 */ + "", + "", + "", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "NC", + "NC", + "MDP_VSYNC_P", /* GPIO_10 */ + "RGBC_IR_INT", + "NFC_VEN", + "CAM_MCLK0", + "CAM_MCLK1", + "NC", + "NC", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "MAIN_CAM_PWR_EN", + "TOF_INT_N", + "NC", + "NC", + "CHAT_CAM_PWR_EN", + "NC", + "TOF_RESET_N", + "CAM2_RSTN", + "NC", + "CAM1_RSTN", /* GPIO_30 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "CC_DIR", + "UIM2_DETECT_EN", + "FP_RESET_N", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "BT_HCI_UART_TXD", + "BT_HCI_UART_RXD", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "NC", + "NC", /* GPIO_50 */ + "NC", + "NC", + "CODEC_INT2_N", + "CODEC_INT1_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", /* GPIO_60 */ + "NC", + "NC", + "TRAY2_DET_DS", + "CODEC_RST_N", + "WSA_L_EN", + "WSA_R_EN", + "NC", + "NC", + "NC", + "LPASS_SLIMBUS_CLK", /* GPIO_70 */ + "LPASS_SLIMBUS_DATA0", + "LPASS_SLIMBUS_DATA1", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "NC", + "RF_LCD_ID_EN", + "NC", + "NC", + "NC", + "NC", /* GPIO_80 */ + "SW_SERVICE", + "TX_GTR_THRES_IN", + "HW_ID0", + "HW_ID1", + "NC", + "NC", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_RESET_N", + "NC", /* GPIO_90 */ + "NC", + "NFC_IRQ", + "NFC_DWLD_EN", + "DISP_RESET_N", + "TRAY2_DET", + "CAM_SOF", + "RFFE6_CLK", + "RFFE6_DATA", + "DEBUG_GPIO0", + "DEBUG_GPIO1", /* GPIO_100 */ + "GRFC4", + "NC", + "NC", + "RSVD", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RST", + "UIM1_PRESENT", + "UIM_BATT_ALARM", + "RSVD", + "NC", + "NC", + "ACCEL_INT", + "GYRO_INT", + "COMPASS_INT", + "ALS_PROX_INT_N", /* GPIO_120 */ + "FP_INT_N", + "NC", + "BAROMETER_INT", + "ACC_COVER_OPEN", + "TS_INT_N", + "NC", + "NC", + "USB_DETECT_EN", + "NC", + "QLINK_REQUEST", /* GPIO_130 */ + "QLINK_ENABLE", + "NC", + "TS_VDDIO_EN", + "WMSS_RESET_N", + "PA_INDICATOR_OR", + "NC", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", /* GPIO_140 */ + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", + "RFFE2_DATA", + "RFFE2_CLK", + "RFFE1_DATA", + "RFFE1_CLK"; +}; + &vreg_l22a_2p85 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index d08639082247..687e96068cb2 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -21,11 +21,11 @@ clocks { div1_mclk: divclk1 { compatible = "gpio-gate-clock"; - pinctrl-0 = <&audio_mclk_pin>; + pinctrl-0 = <&div_clk1>; pinctrl-names = "default"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>; #clock-cells = <0>; - enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>; }; }; @@ -46,7 +46,7 @@ enable-active-high; gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&cam0_vdig_default>; + pinctrl-0 = <&main_cam_pwr_en>; }; cam1_vdig_vreg: cam1-vdig { @@ -56,7 +56,7 @@ enable-active-high; gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&cam1_vdig_default>; + pinctrl-0 = <&chat_cam_pwr_en>; vin-supply = <&vreg_s3a_1p35>; }; @@ -65,9 +65,9 @@ regulator-name = "cam_vio_vreg"; startup-delay-us = <0>; enable-active-high; - gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>; + gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&cam_vio_default>; + pinctrl-0 = <&main_cam_pwr_io_en>; vin-supply = <&vreg_lvs1a_1p8>; }; @@ -92,27 +92,26 @@ id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&usb_extcon_active &usb_vbus_active>; + pinctrl-0 = <&cc_dir_default &usb_detect_en>; }; gpio-keys { compatible = "gpio-keys"; label = "Side buttons"; pinctrl-names = "default"; - pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, - <&cam_snapshot_pin_a>; + pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>; button-vol-down { label = "Volume Down"; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEDOWN>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; }; button-camera-snapshot { label = "Camera Snapshot"; - gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA>; debounce-interval = <15>; @@ -120,7 +119,7 @@ button-camera-focus { label = "Camera Focus"; - gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA_FOCUS>; debounce-interval = <15>; @@ -131,14 +130,14 @@ compatible = "gpio-keys"; label = "Hall sensors"; pinctrl-names = "default"; - pinctrl-0 = <&hall_sensor0_default>; + pinctrl-0 = <&acc_cover_open>; event-hall-sensor0 { label = "Cover Hall Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <30>; }; }; @@ -187,9 +186,9 @@ vibrator { compatible = "gpio-vibrator"; - enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vib_default>; + pinctrl-0 = <&vib_ldo_en>; }; }; @@ -263,7 +262,7 @@ vdd-supply = <&cam_vio_vreg>; pinctrl-names = "default"; - pinctrl-0 = <&tof_int &tof_reset>; + pinctrl-0 = <&tof_int_n &tof_reset>; }; }; @@ -292,6 +291,13 @@ regulator-soft-start; }; +&pm8005_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "SLB", + "OPTION_1_PM8005"; +}; + &pm8005_regulators { /* VDD_GFX supply */ pm8005_s1: s1 { @@ -303,8 +309,35 @@ }; }; -&pm8998_gpio { - vol_down_pin_a: vol-down-active-state { +&pm8998_gpios { + gpio-line-names = "UIM_BATT_ALARM", /* GPIO_1 */ + "NC", + "WLAN_SW_CTRL (DISALLOWED)", + "SSC_PWR_EN", + "VOL_DOWN_N", + "VOL_UP_N", + "SNAPSHOT_N", + "FOCUS_N", + "FLASH_THERM", + "", /* GPIO_10 */ + "", + "", + "DIV_CLK1", + "NC", + "NC (DISALLOWED)", + "DIV_CLK3", + "NC", + "NC", + "NC", + "NC (DISALLOWED)", /* GPIO_20 */ + "NFC_CLK_REQ", + "NC (DISALLOWED)", + "WCSS_PWR_REQ", + "OPTION_1 (DISALLOWED)", + "OPTION_2 (DISALLOWED)", + "PM_SLB (DISALLOWED)"; + + vol_down_n: vol-down-n-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -312,7 +345,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_focus_pin_a: cam-focus-btn-active-state { + focus_n: focus-n-state { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -320,7 +353,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_snapshot_pin_a: cam-snapshot-btn-active-state { + snapshot_n: snapshot-n-state { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -328,15 +361,30 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - audio_mclk_pin: audio-mclk-pin-active-state { + div_clk1: div-clk1-state { pins = "gpio13"; function = "func2"; power-source = <0>; }; }; -&pmi8998_gpio { - cam_vio_default: cam-vio-active-state { +&pmi8998_gpios { + gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */ + "NC", + "NC", + "TYPEC_UUSB_SEL", + "VIB_LDO_EN", + "NC", + "DISPLAY_TYPE_SEL", + "NC", + "NC", + "NC", /* GPIO_10 */ + "NC", + "DIV_CLK3", + "SPMI_I2C_SEL", + "NC"; + + main_cam_pwr_io_en: main-cam-pwr-io-en-state { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; bias-disable; @@ -346,7 +394,7 @@ power-source = <1>; }; - vib_default: vib-en-state { + vib_ldo_en: vib-ldo-en-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; bias-disable; @@ -357,14 +405,9 @@ }; }; -&pm8998_pon { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEUP>; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; }; &qusb2phy { @@ -375,7 +418,7 @@ }; &rpm_requests { - pm8998-regulators { + regulators-0 { compatible = "qcom,rpm-pm8998-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -410,135 +453,166 @@ regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; }; + vreg_s4a_1p8: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-system-load = <100000>; regulator-allow-set-load; }; + vreg_s5a_2p04: s5 { regulator-min-microvolt = <1904000>; regulator-max-microvolt = <2032000>; }; + vreg_s7a_1p025: s7 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1028000>; }; + vreg_l1a_0p875: l1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-system-load = <73400>; regulator-allow-set-load; }; + vreg_l2a_1p2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-system-load = <12560>; regulator-allow-set-load; }; + vreg_l3a_1p0: l3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l5a_0p8: l5 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; }; + vreg_l6a_1p8: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l9a_1p8: l9 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l10a_1p8: l10 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l11a_1p0: l11 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l12a_1p8: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l13a_2p95: l13 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; regulator-allow-set-load; }; + vreg_l14a_1p85: l14 { regulator-min-microvolt = <1848000>; regulator-max-microvolt = <1856000>; regulator-system-load = <32000>; regulator-allow-set-load; }; + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l16a_2p7: l16 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; }; - vreg_l18a_2p85: l18 {}; + + vreg_l18a_2p85: l18 { }; + vreg_l19a_2p7: l19 { regulator-min-microvolt = <2696000>; regulator-max-microvolt = <2704000>; }; + vreg_l20a_2p95: l20 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-system-load = <10000>; regulator-allow-set-load; }; + vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-system-load = <800000>; regulator-allow-set-load; }; + vreg_l22a_2p85: l22 { }; + vreg_l23a_3p3: l23 { regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; }; + vreg_l24a_3p075: l24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; }; + vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; }; + vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-allow-set-load; }; + vreg_l28_3p0: l28 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; + vreg_lvs1a_1p8: lvs1 { }; + vreg_lvs2a_1p8: lvs2 { }; }; - pmi8998-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8998-regulators"; vdd_bob-supply = <&vph_pwr>; @@ -564,15 +638,165 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - - mdp_vsync_n: mdp-vsync-n { + gpio-line-names = "", /* GPIO_0 */ + "", + "", + "", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "NC", + "NC", + "MDP_VSYNC_P", /* GPIO_10 */ + "RGBC_IR_INT", + "NFC_VEN", + "CAM_MCLK0", + "CAM_MCLK1", + "NC", + "NC", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "MAIN_CAM_PWR_EN", + "TOF_INT_N", + "NC", + "NC", + "CHAT_CAM_PWR_EN", + "NC", + "TOF_RESET_N", + "CAM2_RSTN", + "NC", + "CAM1_RSTN", /* GPIO_30 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "CC_DIR", + "UIM2_DETECT_EN", + "FP_RESET_N", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "BT_HCI_UART_TXD", + "BT_HCI_UART_RXD", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "NC", + "NC", /* GPIO_50 */ + "NC", + "NC", + "CODEC_INT2_N", + "CODEC_INT1_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", /* GPIO_60 */ + "NC", + "NC", + "TRAY2_DET_DS", + "CODEC_RST_N", + "WSA_L_EN", + "WSA_R_EN", + "NC", + "NC", + "NC", + "LPASS_SLIMBUS_CLK", /* GPIO_70 */ + "LPASS_SLIMBUS_DATA0", + "LPASS_SLIMBUS_DATA1", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "NC", + "RF_LCD_ID_EN", + "NC", + "NC", + "NC", + "NC", /* GPIO_80 */ + "SW_SERVICE", + "TX_GTR_THRES_IN", + "HW_ID0", + "HW_ID1", + "NC", + "NC", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_RESET_N", + "NC", /* GPIO_90 */ + "NC", + "NFC_IRQ", + "NFC_DWLD_EN", + "DISP_RESET_N", + "TRAY2_DET", + "CAM_SOF", + "RFFE6_CLK", + "RFFE6_DATA", + "DEBUG_GPIO0", + "DEBUG_GPIO1", /* GPIO_100 */ + "GRFC4", + "NC", + "NC", + "RSVD", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RST", + "UIM1_PRESENT", + "UIM_BATT_ALARM", + "RSVD", + "NC", + "NC", + "ACCEL_INT", + "GYRO_INT", + "COMPASS_INT", + "ALS_PROX_INT_N", /* GPIO_120 */ + "FP_INT_N", + "NC", + "BAROMETER_INT", + "ACC_COVER_OPEN", + "TS_INT_N", + "NC", + "NC", + "USB_DETECT_EN", + "NC", + "QLINK_REQUEST", /* GPIO_130 */ + "QLINK_ENABLE", + "NC", + "NC", + "WMSS_RESET_N", + "PA_INDICATOR_OR", + "NC", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", /* GPIO_140 */ + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", + "RFFE2_DATA", + "RFFE2_CLK", + "RFFE1_DATA", + "RFFE1_CLK"; + + mdp_vsync_p: mdp-vsync-p-state { pins = "gpio10"; function = "mdp_vsync_a"; drive-strength = <2>; bias-pull-down; }; - nfc_ven: nfc-ven { + nfc_ven: nfc-ven-state { pins = "gpio12"; function = "gpio"; bias-disable; @@ -580,86 +804,84 @@ output-low; }; - msm_mclk0_default: msm-mclk0-active { + cam_mclk0_active: cam-mclk0-active-state { pins = "gpio13"; function = "cam_mclk"; drive-strength = <2>; bias-disable; }; - msm_mclk1_default: msm-mclk1-active { + cam_mclk1_active: cam-mclk1-active-state { pins = "gpio14"; function = "cam_mclk"; drive-strength = <2>; bias-disable; }; - cci0_default: cci0-default { + cci0_default: cci0-default-state { pins = "gpio18", "gpio19"; function = "cci_i2c"; bias-disable; drive-strength = <2>; }; - cci1_default: cci1-default { + cci1_default: cci1-default-state { pins = "gpio19", "gpio20"; function = "cci_i2c"; bias-disable; drive-strength = <2>; }; - cam0_vdig_default: cam0-vdig-default { + main_cam_pwr_en: main-cam-pwr-en-default-state { pins = "gpio21"; function = "gpio"; bias-disable; drive-strength = <2>; }; - tof_int: tof-int { + tof_int_n: tof-int-n-state { pins = "gpio22"; function = "gpio"; bias-pull-up; drive-strength = <2>; - input-enable; }; - cam1_vdig_default: cam1-vdig-default { + chat_cam_pwr_en: chat-cam-pwr-en-default-state { pins = "gpio25"; function = "gpio"; bias-disable; drive-strength = <2>; }; - usb_extcon_active: usb-extcon-active { - pins = "gpio38"; + tof_reset: tof-reset-state { + pins = "gpio27"; function = "gpio"; bias-disable; - drive-strength = <16>; + drive-strength = <2>; }; - tof_reset: tof-reset { - pins = "gpio27"; + cc_dir_default: cc-dir-active-state { + pins = "gpio38"; function = "gpio"; bias-disable; - drive-strength = <2>; + drive-strength = <16>; }; - hall_sensor0_default: acc-cover-open { + acc_cover_open: acc-cover-open-state { pins = "gpio124"; function = "gpio"; bias-disable; drive-strength = <2>; - input-enable; }; - ts_int_n: ts-int-n { + ts_int_n: ts-int-n-state { pins = "gpio125"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - usb_vbus_active: usb-vbus-active { + usb_detect_en: usb-detect-en-active-state { pins = "gpio128"; function = "gpio"; bias-disable; @@ -667,7 +889,7 @@ output-low; }; - ts_vddio_en: ts-vddio-en-default { + ts_vddio_en: ts-vddio-en-default-state { pins = "gpio133"; function = "gpio"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts new file mode 100644 index 000000000000..2444b87fddf7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts @@ -0,0 +1,708 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Xiaomi Mi 6 (sagit) device tree source based on msm8998-mtp.dtsi + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Degdag Mohamed <degdagmohamed@gmail.com> + * Copyright (c) 2022, Dzmitry Sankouski <dsankouski@gmail.com> + */ + +/dts-v1/; + +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/* + * Delete following upstream (msm8998.dtsi) reserved + * memory mappings which are different in this device. + */ +/delete-node/ &adsp_mem; +/delete-node/ &mpss_mem; +/delete-node/ &venus_mem; +/delete-node/ &mba_mem; +/delete-node/ &slpi_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; +/delete-node/ &wlan_msa_mem; + +/ { + model = "Xiaomi Mi 6"; + compatible = "xiaomi,sagit", "qcom,msm8998"; + chassis-type = "handset"; + /* Required for bootloader to select correct board */ + qcom,board-id = <30 0>; + + reserved-memory { + /* + * Xiaomi's ADSP firmware requires 30 MiB in total, so increase the adsp_mem + * region by 4 MiB to account for this while relocating the other now + * conflicting memory nodes accordingly. + */ + adsp_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x1e00000>; + no-map; + }; + + mpss_mem: memory@8d000000 { + reg = <0x0 0x8d000000 0x0 0x7000000>; + no-map; + }; + + venus_mem: memory@94000000 { + reg = <0x0 0x94000000 0x0 0x500000>; + no-map; + }; + + mba_mem: memory@94500000 { + reg = <0x0 0x94500000 0x0 0x200000>; + no-map; + }; + + slpi_mem: memory@94700000 { + reg = <0x0 0x94700000 0x0 0xf00000>; + no-map; + }; + + ipa_fw_mem: memory@95600000 { + reg = <0x0 0x95600000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@95610000 { + reg = <0x0 0x95610000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@95615000 { + reg = <0x0 0x95615000 0x0 0x100000>; + no-map; + }; + + wlan_msa_mem: memory@95715000 { + reg = <0x0 0x95715000 0x0 0x100000>; + no-map; + }; + + /* Bootloader display framebuffer region */ + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + /* For getting crash logs using Android downstream kernels */ + ramoops@ac000000 { + compatible = "ramoops"; + reg = <0x0 0xac000000 0x0 0x200000>; + console-size = <0x80000>; + pmsg-size = <0x40000>; + record-size = <0x8000>; + ftrace-size = <0x20000>; + }; + + /* + * The following memory regions on downstream are "dynamically allocated" + * but given the same addresses every time. Hard code them as these addresses + * are where the Xiaomi signed firmware expects them to be. + */ + ipa_fws_region: memory@f7800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf7800000 0x0 0x5000>; + no-map; + }; + + zap_shader_region: memory@f7900000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf7900000 0x0 0x2000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Volume buttons"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_key_default>; + + key-vol-up { + label = "Volume up"; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + wakeup-source; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + label = "Hall effect sensor"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor_default_state>; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; + + disp_vddts_vreg: disp-vddts-regulator { + compatible = "regulator-fixed"; + regulator-name = "disp-vddts-regulator"; + gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&blsp1_i2c5 { + pinctrl-names = "default", "sleep"; + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&ts_active_state>; + pinctrl-1 = <&ts_int_suspend_state &ts_reset_suspend_state>; + + vdd-supply = <&disp_vddts_vreg>; + vio-supply = <&vreg_l6a_1p8>; + + syna,reset-delay-ms = <20>; + syna,startup-delay-ms = <20>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + touchscreen-x-mm = <64>; + touchscreen-y-mm = <114>; + syna,sensor-type = <1>; + syna,rezero-wait-ms = <20>; + }; + + rmi4-f1a@1a { + reg = <0x1a>; + syna,codes = <KEY_BACK KEY_APPSELECT>; + }; + }; +}; + +&blsp1_i2c5_sleep { + /delete-property/ bias-pull-up; + bias-disable; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&blsp1_uart3_on { + rx-pins { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 46 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts-pins { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&pm8005_regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + +&pm8998_gpios { + vol_up_key_default: vol-up-key-default-state { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + audio_mclk_pin: audio-mclk-pin-active-state { + pins = "gpio13"; + function = "func2"; + power-source = <0>; + }; +}; + +&qusb2phy { + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { }; + + vreg_lvs2a_1p8: lvs2 { }; + }; + + regulators-1 { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + cci1_default_state: cci1-default-state { + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cdc_reset_n_state: cdc-reset-n-state { + pins = "gpio64"; + function = "gpio"; + bias-pull-down; + drive-strength = <16>; + output-high; + }; + + hall_sensor_default_state: hall-sensor-default-state { + pins = "gpio124"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mdss_dsi_active_state: mdss-dsi-active-state { + pins = "gpio94"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_dsi_suspend_state: mdss-dsi-suspend-state { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_active_state: mdss-te-active-state { + pins = "gpio10"; + function = "mdp_vsync_a"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_suspend_state: mdss-te-suspend-state { + pins = "gpio10"; + function = "mdp_vsync_a"; + drive-strength = <2>; + bias-pull-down; + }; + + msm_mclk0_active_state: msm-mclk0-active-state { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + msm_mclk0_suspend_state: msm-mclk0-suspend-state { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + msm_mclk1_active_state: msm-mclk1-active-state { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + msm_mclk1_suspend_state: msm-mclk1-suspend-state { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_int_active_state: nfc-int-active-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + nfc_int_suspend_state: nfc-int-suspend-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + nfc_enable_active_state: nfc-enable-active-state { + pins = "gpio12", "gpio116"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + nfc_enable_suspend_state: nfc-enable-suspend-state { + pins = "gpio12", "gpio116"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + + ts_active_state: ts-active-state { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + ts_int_suspend_state: ts-int-suspend-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_reset_suspend_state: ts-reset-suspend-state { + pins = "gpio89"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcd_int_n_state: wcd-int-n-state { + pins = "gpio54"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + wsa_leftspk_pwr_n_state: wsa-leftspk-pwr-n-state { + pins = "gpio65"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + + wsa_rightspk_pwr_n_state: wsa-rightspk-pwr-n-state { + pins = "gpio66"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; +}; + +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&ufshc { + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; + status = "okay"; +}; + +&ufsphy { + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; + status = "okay"; +}; + +&usb3 { + /* Disable USB3 clock requirement as the device only supports USB2 */ + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb3_dwc3 { + /* Drop the unused USB 3 PHY */ + phys = <&qusb2phy>; + phy-names = "usb2-phy"; + + /* Fastest mode for USB 2 */ + maximum-speed = "high-speed"; + + /* Force to peripheral until we can switch modes */ + dr_mode = "peripheral"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index f05f16ac5cc1..3ec941fed14f 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -108,6 +108,12 @@ reg = <0x0 0x95700000 0x0 0x100000>; no-map; }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; + size = <0x0 0x4000>; + no-map; + }; }; clocks { @@ -140,6 +146,7 @@ L2_0: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; @@ -184,6 +191,7 @@ L2_1: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; @@ -465,7 +473,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -486,7 +494,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -507,7 +515,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -528,7 +536,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -549,7 +557,7 @@ type = "passive"; }; - cpu4_crit: cpu_crit { + cpu4_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -570,7 +578,7 @@ type = "passive"; }; - cpu5_crit: cpu_crit { + cpu5_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -591,7 +599,7 @@ type = "passive"; }; - cpu6_crit: cpu_crit { + cpu6_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -612,7 +620,7 @@ type = "passive"; }; - cpu7_crit: cpu_crit { + cpu7_crit: cpu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -808,7 +816,7 @@ reg = <0x00100000 0xb0000>; clock-names = "xo", "sleep_clk"; - clocks = <&xo>, <&sleep_clk>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; /* * The hypervisor typically configures the memory region where these clocks @@ -900,7 +908,7 @@ }; pcie0: pci@1c00000 { - compatible = "qcom,pcie-msm8996"; + compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996"; reg = <0x01c00000 0x2000>, <0x1b000000 0xf1d>, <0x1b000f20 0xa8>, @@ -916,7 +924,7 @@ phy-names = "pciephy"; status = "disabled"; - ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>, <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; #interrupt-cells = <1>; @@ -929,11 +937,11 @@ <0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>; - clock-names = "pipe", "bus_master", "bus_slave", "cfg", "aux"; + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave"; power-domains = <&gcc PCIE_0_GDSC>; iommu-map = <0x100 &anoc1_smmu 0x1480 1>; @@ -1056,81 +1064,82 @@ compatible = "qcom,msm8998-pinctrl"; reg = <0x03400000 0xc00000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 150>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - sdc2_on: sdc2-on { - clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <10>; bias-pull-up; }; }; - sdc2_off: sdc2-off { - clk { + sdc2_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <2>; bias-pull-up; }; }; - sdc2_cd: sdc2-cd { + sdc2_cd: sdc2-cd-state { pins = "gpio95"; function = "gpio"; bias-pull-up; drive-strength = <2>; }; - blsp1_uart3_on: blsp1-uart3-on { - tx { + blsp1_uart3_on: blsp1-uart3-on-state { + tx-pins { pins = "gpio45"; function = "blsp_uart3_a"; drive-strength = <2>; bias-disable; }; - rx { + rx-pins { pins = "gpio46"; function = "blsp_uart3_a"; drive-strength = <2>; bias-disable; }; - cts { + cts-pins { pins = "gpio47"; function = "blsp_uart3_a"; drive-strength = <2>; bias-disable; }; - rfr { + rfr-pins { pins = "gpio48"; function = "blsp_uart3_a"; drive-strength = <2>; @@ -1138,168 +1147,168 @@ }; }; - blsp1_i2c1_default: blsp1-i2c1-default { + blsp1_i2c1_default: blsp1-i2c1-default-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; - blsp1_i2c1_sleep: blsp1-i2c1-sleep { + blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c2_default: blsp1-i2c2-default { + blsp1_i2c2_default: blsp1-i2c2-default-state { pins = "gpio32", "gpio33"; function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; - blsp1_i2c2_sleep: blsp1-i2c2-sleep { + blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state { pins = "gpio32", "gpio33"; function = "blsp_i2c2"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c3_default: blsp1-i2c3-default { + blsp1_i2c3_default: blsp1-i2c3-default-state { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; drive-strength = <2>; bias-disable; }; - blsp1_i2c3_sleep: blsp1-i2c3-sleep { + blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c4_default: blsp1-i2c4-default { + blsp1_i2c4_default: blsp1-i2c4-default-state { pins = "gpio10", "gpio11"; function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; - blsp1_i2c4_sleep: blsp1-i2c4-sleep { + blsp1_i2c4_sleep: blsp1-i2c4-sleep-state { pins = "gpio10", "gpio11"; function = "blsp_i2c4"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c5_default: blsp1-i2c5-default { + blsp1_i2c5_default: blsp1-i2c5-default-state { pins = "gpio87", "gpio88"; function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; - blsp1_i2c5_sleep: blsp1-i2c5-sleep { + blsp1_i2c5_sleep: blsp1-i2c5-sleep-state { pins = "gpio87", "gpio88"; function = "blsp_i2c5"; drive-strength = <2>; bias-pull-up; }; - blsp1_i2c6_default: blsp1-i2c6-default { + blsp1_i2c6_default: blsp1-i2c6-default-state { pins = "gpio43", "gpio44"; function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; - blsp1_i2c6_sleep: blsp1-i2c6-sleep { + blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { pins = "gpio43", "gpio44"; function = "blsp_i2c6"; drive-strength = <2>; bias-pull-up; }; /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ - blsp2_i2c1_default: blsp2-i2c1-default { + blsp2_i2c1_default: blsp2-i2c1-default-state { pins = "gpio55", "gpio56"; function = "blsp_i2c7"; drive-strength = <2>; bias-disable; }; - blsp2_i2c1_sleep: blsp2-i2c1-sleep { + blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { pins = "gpio55", "gpio56"; function = "blsp_i2c7"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c2_default: blsp2-i2c2-default { + blsp2_i2c2_default: blsp2-i2c2-default-state { pins = "gpio6", "gpio7"; function = "blsp_i2c8"; drive-strength = <2>; bias-disable; }; - blsp2_i2c2_sleep: blsp2-i2c2-sleep { + blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { pins = "gpio6", "gpio7"; function = "blsp_i2c8"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c3_default: blsp2-i2c3-default { + blsp2_i2c3_default: blsp2-i2c3-default-state { pins = "gpio51", "gpio52"; function = "blsp_i2c9"; drive-strength = <2>; bias-disable; }; - blsp2_i2c3_sleep: blsp2-i2c3-sleep { + blsp2_i2c3_sleep: blsp2-i2c3-sleep-state { pins = "gpio51", "gpio52"; function = "blsp_i2c9"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c4_default: blsp2-i2c4-default { + blsp2_i2c4_default: blsp2-i2c4-default-state { pins = "gpio67", "gpio68"; function = "blsp_i2c10"; drive-strength = <2>; bias-disable; }; - blsp2_i2c4_sleep: blsp2-i2c4-sleep { + blsp2_i2c4_sleep: blsp2-i2c4-sleep-state { pins = "gpio67", "gpio68"; function = "blsp_i2c10"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c5_default: blsp2-i2c5-default { + blsp2_i2c5_default: blsp2-i2c5-default-state { pins = "gpio60", "gpio61"; function = "blsp_i2c11"; drive-strength = <2>; bias-disable; }; - blsp2_i2c5_sleep: blsp2-i2c5-sleep { + blsp2_i2c5_sleep: blsp2-i2c5-sleep-state { pins = "gpio60", "gpio61"; function = "blsp_i2c11"; drive-strength = <2>; bias-pull-up; }; - blsp2_i2c6_default: blsp2-i2c6-default { + blsp2_i2c6_default: blsp2-i2c6-default-state { pins = "gpio83", "gpio84"; function = "blsp_i2c12"; drive-strength = <2>; bias-disable; }; - blsp2_i2c6_sleep: blsp2-i2c6-sleep { + blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { pins = "gpio83", "gpio84"; function = "blsp_i2c12"; drive-strength = <2>; @@ -1356,6 +1365,10 @@ memory-region = <&mpss_mem>; }; + metadata { + memory-region = <&mdata_mem>; + }; + glink-edge { interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>; label = "modem"; @@ -1393,43 +1406,43 @@ opp-710000097 { opp-hz = /bits/ 64 <710000097>; opp-level = <RPM_SMD_LEVEL_TURBO>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-670000048 { opp-hz = /bits/ 64 <670000048>; opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-596000097 { opp-hz = /bits/ 64 <596000097>; opp-level = <RPM_SMD_LEVEL_NOM>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-515000097 { opp-hz = /bits/ 64 <515000097>; opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-414000000 { opp-hz = /bits/ 64 <414000000>; opp-level = <RPM_SMD_LEVEL_SVS>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-342000000 { opp-hz = /bits/ 64 <342000000>; opp-level = <RPM_SMD_LEVEL_LOW_SVS>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-257000000 { opp-hz = /bits/ 64 <257000000>; opp-level = <RPM_SMD_LEVEL_MIN_SVS>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; }; }; @@ -1513,7 +1526,7 @@ compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x06002000 0x1000>, <0x16280000 0x180000>; - reg-names = "stm-base", "stm-data-base"; + reg-names = "stm-base", "stm-stimulus-base"; status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -1903,7 +1916,7 @@ cpu = <&CPU4>; - port{ + port { etm4_out: endpoint { remote-endpoint = <&apss_funnel_in4>; }; @@ -1920,7 +1933,7 @@ cpu = <&CPU5>; - port{ + port { etm5_out: endpoint { remote-endpoint = <&apss_funnel_in5>; }; @@ -1937,7 +1950,7 @@ cpu = <&CPU6>; - port{ + port { etm6_out: endpoint { remote-endpoint = <&apss_funnel_in6>; }; @@ -1954,7 +1967,7 @@ cpu = <&CPU7>; - port{ + port { etm7_out: endpoint { remote-endpoint = <&apss_funnel_in7>; }; @@ -1982,7 +1995,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; usb3: usb@a8f8800 { @@ -2087,7 +2099,7 @@ clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&xo>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; bus-width = <4>; status = "disabled"; }; @@ -2397,8 +2409,7 @@ "dsi1byte", "hdmipll", "dplink", - "dpvco", - "core_bi_pll_test_se"; + "dpvco"; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GCC_MMSS_GPLL0_CLK>, <0>, @@ -2407,7 +2418,6 @@ <0>, <0>, <0>, - <0>, <0>; }; @@ -2481,7 +2491,8 @@ }; apcs_glb: mailbox@17911000 { - compatible = "qcom,msm8998-apcs-hmss-global"; + compatible = "qcom,msm8998-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x17911000 0x1000>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm2250.dtsi new file mode 100644 index 000000000000..5f1d15db5c99 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm2250.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm2250", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + + pm2250_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + debounce = <15625>; + bias-pull-up; + }; + + pm2250_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm2250_gpios: gpio@c000 { + compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm2250_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm2250", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi new file mode 100644 index 000000000000..59092a551a16 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: BSD-3-Clause + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm6125-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm6125_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm6125", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6125_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pon_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + linux,code = <KEY_POWER>; + bias-pull-up; + status = "disabled"; + }; + + pon_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + pm6125_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm6125_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm6125_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #io-channel-cells = <1>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + }; + + vph-pwr@83 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + }; + + vcoin@85 { + reg = <ADC5_VCOIN>; + qcom,pre-scaling = <1 3>; + }; + + xo-therm@4c { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + }; + }; + + pm6125_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + pm6125_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + pm6125_gpios: gpio@c000 { + compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6125_gpios 0 0 9>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm6125", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 8a4972e6a24c..2e6afa296141 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause -// Copyright (c) 2019, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/input/linux-event-codes.h> @@ -86,11 +88,11 @@ status = "disabled"; }; - pm6150_gpio: gpios@c000 { + pm6150_gpios: gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm6150_gpio 0 0 10>; + gpio-ranges = <&pm6150_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index f02c223ef448..6f7aa67501e2 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -1,10 +1,43 @@ // SPDX-License-Identifier: BSD-3-Clause -// Copyright (c) 2019, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm6150l-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm6150l_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm6150l_lsid4: pmic@4 { compatible = "qcom,pm6150l", "qcom,spmi-pmic"; @@ -12,6 +45,13 @@ #address-cells = <1>; #size-cells = <0>; + pm6150l_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pm6150l_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; @@ -55,11 +95,11 @@ status = "disabled"; }; - pm6150l_gpio: gpios@c000 { + pm6150l_gpios: gpio@c000 { compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm6150l_gpio 0 0 12>; + gpio-ranges = <&pm6150l_gpios 0 0 12>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -72,6 +112,12 @@ #address-cells = <1>; #size-cells = <0>; + pm6150l_flash: led-controller@d300 { + compatible = "qcom,pm6150l-flash-led", "qcom,spmi-flash-led"; + reg = <0xd300>; + status = "disabled"; + }; + pm6150l_wled: leds@d800 { compatible = "qcom,pm6150l-wled"; reg = <0xd800>, <0xd900>; diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi index ecf9b9919182..3a2a841e83f1 100644 --- a/arch/arm64/boot/dts/qcom/pm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi @@ -3,8 +3,40 @@ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> */ +#include <dt-bindings/input/input.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm6350-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm6350_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmic@0 { compatible = "qcom,pm6350", "qcom,spmi-pmic"; @@ -35,7 +67,14 @@ }; }; - pm6350_gpios: gpios@c000 { + pm6350_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm6350_gpios: gpio@c000 { compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index e1622b16c08b..4bc717917f44 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -11,7 +11,7 @@ / { thermal-zones { - pm660 { + pm660-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -163,14 +163,14 @@ qcom,pre-scaling = <1 3>; }; - vcoin: vcoin@83 { + vcoin: vcoin@85 { reg = <ADC5_VCOIN>; qcom,decimation = <1024>; qcom,pre-scaling = <1 3>; }; }; - pm660_gpios: gpios@c000 { + pm660_gpios: gpio@c000 { compatible = "qcom,pm660-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index 8aa0a5078772..87b71b7205b8 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -11,7 +11,7 @@ / { thermal-zones { - pm660l { + pm660l-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -48,7 +48,7 @@ #thermal-sensor-cells = <0>; }; - pm660l_gpios: gpios@c000 { + pm660l_gpios: gpio@c000 { compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index 61f7a6345150..d709d955a2f5 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -110,6 +110,14 @@ label = "chg_mid"; }; + adc-chan@4b { + reg = <ADC5_BAT_ID_100K_PU>; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + label = "bat_id"; + }; + adc-chan@83 { reg = <ADC5_VPH_PWR>; qcom,pre-scaling = <1 3>; diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi index e7f64a9ddc9c..d1c5476af5ee 100644 --- a/arch/arm64/boot/dts/qcom/pm7325.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause -// Copyright (c) 2021, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> @@ -18,7 +20,7 @@ #thermal-sensor-cells = <0>; }; - pm7325_gpios: gpios@8800 { + pm7325_gpios: gpio@8800 { compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi index 50fb6c753bf8..0f0ab2da8305 100644 --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -11,11 +11,11 @@ #address-cells = <1>; #size-cells = <0>; - pm8005_gpio: gpios@c000 { + pm8005_gpios: gpio@c000 { compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm8005_gpio 0 0 4>; + gpio-ranges = <&pm8005_gpios 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8010.dtsi b/arch/arm64/boot/dts/qcom/pm8010.dtsi new file mode 100644 index 000000000000..0ea641e12209 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8010.dtsi @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8010-m-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8010_m_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8010-n-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8010_n_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8010_m: pmic@c { + compatible = "qcom,pm8010", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8010_m_temp_alarm: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + }; + + pm8010_n: pmic@d { + compatible = "qcom,pm8010", "qcom,spmi-pmic"; + reg = <0xd SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8010_n_temp_alarm: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0xd 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index 574fa95a2871..db90c55fa2cf 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -121,7 +121,7 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; + reg = <0x6000>, <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; }; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index cdded791d96e..66752cc063d6 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -53,7 +53,7 @@ status = "disabled"; }; - pm8150b_vbus: dcdc@1100 { + pm8150b_vbus: usb-vbus-regulator@1100 { compatible = "qcom,pm8150b-vbus-reg"; status = "disabled"; reg = <0x1100>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index 135bfb8d629b..cca45fad75ac 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -116,6 +116,12 @@ #address-cells = <1>; #size-cells = <0>; + pm8150l_flash: led-controller@d300 { + compatible = "qcom,pm8150l-flash-led", "qcom,spmi-flash-led"; + reg = <0xd300>; + status = "disabled"; + }; + pm8150l_lpg: pwm { compatible = "qcom,pm8150l-lpg"; diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi new file mode 100644 index 000000000000..46396ec1a330 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8550-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8550: pmic@1 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550_gpios: gpio@8800 { + compatible = "qcom,pm8550-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi new file mode 100644 index 000000000000..72609f31c890 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8550b-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550b_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8550b: pmic@7 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550b_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550b_gpios: gpio@8800 { + compatible = "qcom,pm8550b-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550b_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8550b_eusb2_repeater: phy@fd00 { + compatible = "qcom,pm8550b-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi new file mode 100644 index 000000000000..c47646a467be --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8550ve-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550ve_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8550ve: pmic@5 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550ve_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550ve_gpios: gpio@8800 { + compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550ve_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi new file mode 100644 index 000000000000..97b1c18aa7d8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8550vs-c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550vs_c_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550vs-d-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550vs_d_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550vs-e-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550vs_e_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550vs-g-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8550vs_g_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8550vs_c: pmic@2 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550vs_c_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550vs_c_gpios: gpio@8800 { + compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550vs_c_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8550vs_d: pmic@3 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550vs_d_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550vs_d_gpios: gpio@8800 { + compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550vs_d_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8550vs_e: pmic@4 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550vs_e_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550vs_e_gpios: gpio@8800 { + compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550vs_e_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8550vs_g: pmic@6 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550vs_g_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550vs_g_gpios: gpio@8800 { + compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550vs_g_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 606c2a6d1f0f..f4fb1a92ab55 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -41,7 +41,7 @@ }; }; - pm8916_usbin: extcon@1300 { + pm8916_usbin: usb-detect@1300 { compatible = "qcom,pm8941-misc"; reg = <0x1300>; interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; @@ -93,7 +93,8 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; @@ -107,7 +108,7 @@ #interrupt-cells = <2>; }; - pm8916_gpios: gpios@c000 { + pm8916_gpios: gpio@c000 { compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi new file mode 100644 index 000000000000..5ec38b7e335a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org> + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm8950", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + pm8950_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8950_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8950_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + vcoin@5 { + reg = <VADC_VCOIN>; + qcom,pre-scaling = <1 1>; + }; + + vph-pwr@7 { + reg = <VADC_VSYS>; + qcom,pre-scaling = <1 1>; + }; + + die-temp@8 { + reg = <VADC_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + }; + + ref-625mv@9 { + reg = <VADC_REF_625MV>; + qcom,pre-scaling = <1 1>; + }; + + ref-1250mv@a { + reg = <VADC_REF_1250MV>; + qcom,pre-scaling = <1 1>; + }; + + ref-buf-625mv@c { + reg = <VADC_SPARE1>; + qcom,pre-scaling = <1 1>; + }; + + ref-gnd@e { + reg = <VADC_GND_REF>; + }; + + ref-vdd@f { + reg = <VADC_VDD_VADC>; + }; + + pa-therm1@11 { + reg = <VADC_P_MUX2_1_1>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + case-therm@13 { + reg = <VADC_P_MUX4_1_1>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + xo-therm@32 { + reg = <VADC_LR_MUX3_XO_THERM>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm0@36 { + reg = <VADC_LR_MUX7_HW_ID>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + xo-therm-buf@3c { + reg = <VADC_LR_MUX3_BUF_XO_THERM>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + }; + + pm8950_mpps: mpps@a000 { + compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + gpio-ranges = <&pm8950_mpps 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8950_gpios: gpio@c000 { + compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8950_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm8950", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8950_spmi_regulators: regulators { + compatible = "qcom,pm8950-regulators"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index e92e5ac414d3..672094c8ca58 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -108,7 +108,7 @@ }; }; - pm8994_gpios: gpios@c000 { + pm8994_gpios: gpio@c000 { compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index d09f2954b6f9..340033ac3186 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -52,6 +52,14 @@ bias-pull-up; linux,code = <KEY_POWER>; }; + + pm8998_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; }; pm8998_temp: temp-alarm@2400 { @@ -63,8 +71,8 @@ #thermal-sensor-cells = <0>; }; - pm8998_coincell: coincell@2800 { - compatible = "qcom,pm8941-coincell"; + pm8998_coincell: charger@2800 { + compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell"; reg = <0x2800>; status = "disabled"; @@ -101,11 +109,11 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pm8998_gpio: gpios@c000 { + pm8998_gpios: gpio@c000 { compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm8998_gpio 0 0 26>; + gpio-ranges = <&pm8998_gpios 0 0 26>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi new file mode 100644 index 000000000000..4891be3cd68a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com> + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@2 { + compatible = "qcom,pmi8950", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi8950_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@0 { + reg = <VADC_USBIN>; + qcom,pre-scaling = <1 4>; + label = "usbin"; + }; + + adc-chan@1 { + reg = <VADC_DCIN>; + qcom,pre-scaling = <1 4>; + label = "dcin"; + }; + + adc-chan@2 { + reg = <VADC_VCHG_SNS>; + qcom,pre-scaling = <1 1>; + label = "vchg_sns"; + }; + + adc-chan@9 { + reg = <VADC_REF_625MV>; + qcom,pre-scaling = <1 1>; + label = "ref_625mv"; + }; + + adc-chan@a { + reg = <VADC_REF_1250MV>; + qcom,pre-scaling = <1 1>; + label = "ref_1250mv"; + }; + + adc-chan@d { + reg = <VADC_SPARE2>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + }; + + pmi8950_mpps: mpps@a000 { + compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + gpio-ranges = <&pmi8950_mpps 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmi8950_gpios: gpio@c000 { + compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmi8950_gpios 0 0 2>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@3 { + compatible = "qcom,pmi8950", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi8950_wled: leds@d800 { + compatible = "qcom,pmi8950-wled"; + reg = <0xd800>, <0xd900>; + interrupts = <0x3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "short"; + label = "backlight"; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index 542c215dde10..0192968f4d9b 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -10,7 +10,7 @@ #address-cells = <1>; #size-cells = <0>; - pmi8994_gpios: gpios@c000 { + pmi8994_gpios: gpio@c000 { compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; @@ -49,8 +49,6 @@ pmi8994_spmi_regulators: regulators { compatible = "qcom,pmi8994-regulators"; - #address-cells = <1>; - #size-cells = <1>; }; pmi8994_wled: wled@d800 { diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index 3852a012bb0f..ffe587f281d8 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -9,15 +9,23 @@ #address-cells = <1>; #size-cells = <0>; - pmi8998_gpio: gpios@c000 { + pmi8998_gpios: gpio@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pmi8998_gpio 0 0 14>; + gpio-ranges = <&pmi8998_gpios 0 0 14>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; + + pmi8998_rradc: adc@4500 { + compatible = "qcom,pmi8998-rradc"; + reg = <0x4500>; + #io-channel-cells = <1>; + + status = "disabled"; + }; }; pmi8998_lsid1: pmic@3 { diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index a7ec9d11946d..f26fb7d32faf 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -8,27 +8,33 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/* (Sadly) this PMIC can be configured to be at different SIDs */ +#ifndef PMK8350_SID + #define PMK8350_SID 0 +#endif + &spmi_bus { - pmk8350: pmic@0 { + pmk8350: pmic@PMK8350_SID { compatible = "qcom,pmk8350", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; + reg = <PMK8350_SID SPMI_USID>; #address-cells = <1>; #size-cells = <0>; pmk8350_pon: pon@1300 { - compatible = "qcom,pm8998-pon"; - reg = <0x1300>; + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, <0x800>; + reg-names = "hlos", "pbs"; pon_pwrkey: pwrkey { compatible = "qcom,pmk8350-pwrkey"; - interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + interrupts = <PMK8350_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_POWER>; status = "disabled"; }; pon_resin: resin { compatible = "qcom,pmk8350-resin"; - interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + interrupts = <PMK8350_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; status = "disabled"; }; }; @@ -38,14 +44,14 @@ reg = <0x3100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts = <PMK8350_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #io-channel-cells = <1>; }; pmk8350_adc_tm: adc-tm@3400 { compatible = "qcom,adc-tm7"; reg = <0x3400>; - interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts = <PMK8350_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; #thermal-sensor-cells = <1>; @@ -56,7 +62,7 @@ compatible = "qcom,pmk8350-rtc"; reg = <0x6100>, <0x6200>; reg-names = "rtc", "alarm"; - interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + interrupts = <PMK8350_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi new file mode 100644 index 000000000000..201efeda7d2d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmk8550: pmic@0 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8550_pon: pon@1300 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, <0x800>; + reg-names = "hlos", "pbs"; + + pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + status = "disabled"; + }; + + pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + status = "disabled"; + }; + }; + + pmk8550_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + pmk8550_gpios: gpio@8800 { + compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio"; + reg = <0xb800>; + gpio-controller; + gpio-ranges = <&pmk8550_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi index 20c5d60c8c2c..ee1e428d3a6e 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi @@ -108,7 +108,7 @@ pmm8155au_1_rtc: rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; + reg = <0x6000>, <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; diff --git a/arch/arm64/boot/dts/qcom/pmp8074.dtsi b/arch/arm64/boot/dts/qcom/pmp8074.dtsi new file mode 100644 index 000000000000..580684411d74 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause + +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> + +&spmi_bus { + pmic@0 { + compatible = "qcom,pmp8074", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmp8074_adc: adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + }; + + vref-vadc@2 { + reg = <ADC5_VREF_VADC>; + qcom,pre-scaling = <1 1>; + }; + + pmic_die: die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + }; + + xo_therm: xo-temp@76 { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + pa_therm1: thermistor1@77 { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + pa_therm2: thermistor2@78 { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + pa_therm3: thermistor3@79 { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + vph-pwr@131 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + }; + }; + + pmp8074_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + allow-set-time; + status = "disabled"; + }; + + pmp8074_gpios: gpio@c000 { + compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmp8074_gpios 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pmp8074", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + + regulators { + compatible = "qcom,pmp8074-regulators"; + + s3: s3 { + regulator-name = "vdd_s3"; + regulator-min-microvolt = <592000>; + regulator-max-microvolt = <1064000>; + regulator-always-on; + regulator-boot-on; + }; + + s4: s4 { + regulator-name = "vdd_s4"; + regulator-min-microvolt = <712000>; + regulator-max-microvolt = <992000>; + regulator-always-on; + regulator-boot-on; + }; + + l11: l11 { + regulator-name = "l11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmr735d.dtsi b/arch/arm64/boot/dts/qcom/pmr735d.dtsi new file mode 100644 index 000000000000..41fb664a10b3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmr735d.dtsi @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmr735d-k-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmr735d_k_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmr735d-l-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmr735d_l_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pmr735d_k: pmic@a { + compatible = "qcom,pmr735d", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735d_k_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmr735d_k_gpios: gpio@8800 { + compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735d_k_gpios 0 0 2>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmr735d_l: pmic@b { + compatible = "qcom,pmr735d", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735d_l_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmr735d_l_gpios: gpio@8800 { + compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735d_l_gpios 0 0 2>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 634b0681d04c..22edb47c6a84 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2018, Linaro Limited +/* + * Copyright (c) 2018, Linaro Limited + */ #include <dt-bindings/spmi/spmi.h> #include <dt-bindings/input/linux-event-codes.h> @@ -123,7 +125,7 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; + reg = <0x6000>, <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; }; diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi new file mode 100644 index 000000000000..b29bc4e4b837 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -0,0 +1,1562 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + * + * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. + */ + +#include <dt-bindings/clock/qcom,gcc-qcm2290.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-qcm2290", "qcom,scm"; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + #reset-cells = <1>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x40000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: xbl-aop@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: sec-apps@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem@46000000 { + compatible = "qcom,smem"; + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + pil_modem_mem: modem@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: video@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_adsp_mem: adsp@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1c00000>; + no-map; + }; + + pil_ipa_fw_mem: ipa-fw@53600000 { + reg = <0x0 0x53600000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: ipa-gsi@53610000 { + reg = <0x0 0x53610000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: zap@53615000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x53615000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: framebuffer@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: dpfs-data@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: reserved@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b01000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-qcm2290"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,qcm2290-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp5 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; + }; + }; + }; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x00340000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,qcm2290-tlmm"; + reg = <0x0 0x00500000 0x0 0x300000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 127>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio4", "gpio5"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio8", "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio14", "gpio15"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1","gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi1_default: qup-spi1-default-state { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi2_default: qup-spi2-default-state { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi3_default: qup-spi3-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi4_default: qup-spi4-default-state { + pins = "gpio12", "gpio13", "gpio96", "gpio97"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi5_default: qup-spi5-default-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart0_default: qup-uart0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart4_default: qup-uart4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-qcm2290"; + reg = <0x0 0x01400000 0x0 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + usb_hsphy: phy@1613000 { + compatible = "qcom,qcm2290-qusb2-phy"; + reg = <0x0 0x01613000 0x0 0x180>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + #phy-cells = <0>; + + status = "disabled"; + }; + + qfprom@1b44000 { + compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; + reg = <0x0 0x01b44000 0x0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x01c40000 0x0 0x1100>, + <0x0 0x01e00000 0x0 0x2000000>, + <0x0 0x03e00000 0x0 0x100000>, + <0x0 0x03f00000 0x0 0xa0000>, + <0x0 0x01c0a000 0x0 0x26000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tsens0: thermal-sensor@4411000 { + compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2"; + reg = <0x0 0x04411000 0x0 0x1ff>, + <0x0 0x04410000 0x0 0x8>; + #qcom,sensors = <10>; + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + rng: rng@4453000 { + compatible = "qcom,prng-ee"; + reg = <0x0 0x04453000 0x0 0x1000>; + clocks = <&rpmcc RPM_SMD_HWKM_CLK>; + clock-names = "core"; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x0 0x045f0000 0x0 0x7000>; + }; + + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x0 0x04690000 0x0 0x10000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04744000 0x0 0x1000>, + <0x0 0x04745000 0x0 0x1000>, + <0x0 0x04748000 0x0 0x8000>; + reg-names = "hc", + "cqhci", + "ice"; + + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", + "core", + "xo", + "ice"; + + resets = <&gcc GCC_SDCC1_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + iommus = <&apps_smmu 0xc0 0x0>; + + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <8>; + + status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04784000 0x0 0x1000>; + reg-names = "hc"; + + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + + resets = <&gcc GCC_SDCC2_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0xa0 0x0>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + }; + }; + + gpi_dma0: dma-controller@4a00000 { + compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x04a00000 0x0 0x60000>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0xf6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x04ac0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xe3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@4a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart0_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@4a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@4a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@4a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@4a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c4_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@4a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@4a90000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart4_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c5: i2c@4a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@4a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usb: usb@4ef8800 { + compatible = "qcom,qcm2290-dwc3", "qcom,dwc3"; + reg = <0x0 0x04ef8800 0x0 0x400>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133333333>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x04e00000 0x0 0xcd00>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + remoteproc_mpss: remoteproc@6080000 { + compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; + reg = <0x0 0x06080000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDDCX>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 12>; + }; + }; + + remoteproc_adsp: remoteproc@ab00000 { + compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas"; + reg = <0x0 0x0ab00000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDD_LPI_CX>, + <&rpmpd QCM2290_VDD_LPI_MX>; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x0c600000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + }; + + wifi: wifi@c800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0x0 0x0c800000 0x0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + + watchdog@f017000 { + compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt"; + reg = <0x0 0x0f017000 0x0 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sleep_clk>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,qcm2290-apcs-hmss-global"; + reg = <0x0 0x0f111000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x0f120000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x0f121000 0x8000>; + + frame@0 { + reg = <0x0 0x1000>, + <0x1000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@2000 { + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@3000 { + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@4000 { + reg = <0x4000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@5000 { + reg = <0x5000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@6000 { + reg = <0x6000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@7000 { + reg = <0x7000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0f200000 0x0 0x10000>, + <0x0 0x0f300000 0x0 0x100000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + cpufreq_hw: cpufreq@f521000 { + compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw"; + reg = <0x0 0x0f521000 0x0 0x1000>; + reg-names = "freq-domain0"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + thermal-zones { + mapss-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + mapss_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_crit: wlan-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_crit: cpuss0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_crit: cpuss1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + mdm0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_crit: mdm0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + mdm1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_crit: mdm1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + gpu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + hm-center-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + hm_center_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_crit: hm-center-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_crit: camera-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts index 937eb4555ffe..fc29b194cd34 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2018, Linaro Limited +/* + * Copyright (c) 2018, Linaro Limited + */ /dts-v1/; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts index 08d5d51221cf..59702ba24f35 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2018, Linaro Limited +/* + * Copyright (c) 2018, Linaro Limited + */ /dts-v1/; @@ -37,54 +39,54 @@ }; &tlmm { - ethernet_defaults: ethernet-defaults { - int { + ethernet_defaults: ethernet-defaults-state { + int-pins { pins = "gpio61"; function = "rgmii_int"; bias-disable; drive-strength = <2>; }; - mdc { + mdc-pins { pins = "gpio76"; function = "rgmii_mdc"; bias-pull-up; }; - mdio { + mdio-pins { pins = "gpio75"; function = "rgmii_mdio"; bias-pull-up; }; - tx { + tx-pins { pins = "gpio67", "gpio66", "gpio65", "gpio64"; function = "rgmii_tx"; bias-pull-up; drive-strength = <16>; }; - rx { + rx-pins { pins = "gpio73", "gpio72", "gpio71", "gpio70"; function = "rgmii_rx"; bias-disable; drive-strength = <2>; }; - tx-ctl { + tx-ctl-pins { pins = "gpio68"; function = "rgmii_ctl"; bias-pull-up; drive-strength = <16>; }; - rx-ctl { + rx-ctl-pins { pins = "gpio74"; function = "rgmii_ctl"; bias-disable; drive-strength = <2>; }; - tx-ck { + tx-ck-pins { pins = "gpio63"; function = "rgmii_ck"; bias-pull-up; drive-strength = <16>; }; - rx-ck { + rx-ck-pins { pins = "gpio69"; function = "rgmii_ck"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 1678ef0f8684..10655401528e 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2018, Linaro Limited +/* + * Copyright (c) 2018, Linaro Limited + */ #include <dt-bindings/gpio/gpio.h> #include "qcs404.dtsi" @@ -125,7 +127,7 @@ }; &rpm_requests { - pms405-regulators { + regulators { compatible = "qcom,rpm-pms405-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -229,7 +231,7 @@ }; &tlmm { - perst_state: perst { + perst_state: perst-state { pins = "gpio43"; function = "gpio"; @@ -238,68 +240,62 @@ output-low; }; - sdc1_on: sdc1-on { - clk { + sdc1_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; - rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc1_off: sdc1-off { - clk { + sdc1_off: sdc1-off-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - usb3_id_pin: usb3-id-pin { - pinmux { - pins = "gpio116"; - function = "gpio"; - }; + usb3_id_pin: usb3-id-state { + pins = "gpio116"; + function = "gpio"; - pinconf { - pins = "gpio116"; - drive-strength = <2>; - bias-pull-up; - input-enable; - }; + drive-strength = <2>; + bias-pull-up; }; }; @@ -366,31 +362,28 @@ /* PINCTRL - additions to nodes defined in qcs404.dtsi */ &blsp1_uart2_default { - rx { + rx-pins { drive-strength = <2>; bias-disable; }; - tx { + tx-pins { drive-strength = <2>; bias-disable; }; }; &blsp1_uart3_default { - cts { - pins = "gpio84"; + cts-pins { bias-disable; }; - rts-tx { - pins = "gpio85", "gpio82"; + rts-tx-pins { drive-strength = <2>; bias-disable; }; - rx { - pins = "gpio83"; + rx-pins { bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 80f2d05595fa..972f753847e1 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2018, Linaro Limited +/* + * Copyright (c) 2018, Linaro Limited + */ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-qcs404.h> @@ -93,6 +95,7 @@ L2_0: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; idle-states { @@ -221,13 +224,15 @@ qcom,rpm-msg-ram = <&rpm_msg_ram>; mboxes = <&apcs_glb 0>; - rpm_requests: glink-channel { + rpm_requests: rpm-requests { compatible = "qcom,rpm-qcs404"; qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; }; rpmpd: power-controller { @@ -364,13 +369,126 @@ reg = <0x000a4000 0x1000>; #address-cells = <1>; #size-cells = <1>; - tsens_caldata: caldata@d0 { - reg = <0x1f8 0x14>; - }; cpr_efuse_speedbin: speedbin@13c { reg = <0x13c 0x4>; bits = <2 3>; }; + + tsens_s0_p1: s0-p1@1f8 { + reg = <0x1f8 0x1>; + bits = <0 6>; + }; + + tsens_s0_p2: s0-p2@1f8 { + reg = <0x1f8 0x2>; + bits = <6 6>; + }; + + tsens_s1_p1: s1-p1@1f9 { + reg = <0x1f9 0x2>; + bits = <4 6>; + }; + + tsens_s1_p2: s1-p2@1fa { + reg = <0x1fa 0x1>; + bits = <2 6>; + }; + + tsens_s2_p1: s2-p1@1fb { + reg = <0x1fb 0x1>; + bits = <0 6>; + }; + + tsens_s2_p2: s2-p2@1fb { + reg = <0x1fb 0x2>; + bits = <6 6>; + }; + + tsens_s3_p1: s3-p1@1fc { + reg = <0x1fc 0x2>; + bits = <4 6>; + }; + + tsens_s3_p2: s3-p2@1fd { + reg = <0x1fd 0x1>; + bits = <2 6>; + }; + + tsens_s4_p1: s4-p1@1fe { + reg = <0x1fe 0x1>; + bits = <0 6>; + }; + + tsens_s4_p2: s4-p2@1fe { + reg = <0x1fe 0x2>; + bits = <6 6>; + }; + + tsens_s5_p1: s5-p1@200 { + reg = <0x200 0x1>; + bits = <0 6>; + }; + + tsens_s5_p2: s5-p2@200 { + reg = <0x200 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1: s6-p1@201 { + reg = <0x201 0x2>; + bits = <4 6>; + }; + + tsens_s6_p2: s6-p2@202 { + reg = <0x202 0x1>; + bits = <2 6>; + }; + + tsens_s7_p1: s7-p1@203 { + reg = <0x203 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2: s7-p2@203 { + reg = <0x203 0x2>; + bits = <6 6>; + }; + + tsens_s8_p1: s8-p1@204 { + reg = <0x204 0x2>; + bits = <4 6>; + }; + + tsens_s8_p2: s8-p2@205 { + reg = <0x205 0x1>; + bits = <2 6>; + }; + + tsens_s9_p1: s9-p1@206 { + reg = <0x206 0x1>; + bits = <0 6>; + }; + + tsens_s9_p2: s9-p2@206 { + reg = <0x206 0x2>; + bits = <6 6>; + }; + + tsens_mode: mode@208 { + reg = <0x208 1>; + bits = <0 3>; + }; + + tsens_base1: base1@208 { + reg = <0x208 2>; + bits = <3 8>; + }; + + tsens_base2: base2@208 { + reg = <0x209 2>; + bits = <3 8>; + }; + cpr_efuse_quot_offset1: qoffset1@231 { reg = <0x231 0x4>; bits = <4 7>; @@ -445,8 +563,30 @@ compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; reg = <0x004a9000 0x1000>, /* TM */ <0x004a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_caldata>; - nvmem-cell-names = "calib"; + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2"; #qcom,sensors = <10>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow"; @@ -483,27 +623,31 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - clocks = <&xo_board>, - <&gcc GCC_CDSP_CFG_AHB_CLK>, - <&gcc GCC_CDSP_TBU_CLK>, - <&gcc GCC_BIMC_CDSP_CLK>, - <&turingcc TURING_WRAPPER_AON_CLK>, - <&turingcc TURING_Q6SS_AHBS_AON_CLK>, - <&turingcc TURING_Q6SS_AHBM_AON_CLK>, - <&turingcc TURING_Q6SS_Q6_AXIM_CLK>; - clock-names = "xo", - "sway", - "tbu", - "bimc", - "ahb_aon", - "q6ss_slave", - "q6ss_master", - "q6_axim"; - - resets = <&gcc GCC_CDSP_RESTART>; - reset-names = "restart"; - - qcom,halt-regs = <&tcsr 0x19004>; + clocks = <&xo_board>; + clock-names = "xo"; + + /* + * If the node was using the PIL binding, then include properties: + * clocks = <&xo_board>, + * <&gcc GCC_CDSP_CFG_AHB_CLK>, + * <&gcc GCC_CDSP_TBU_CLK>, + * <&gcc GCC_BIMC_CDSP_CLK>, + * <&turingcc TURING_WRAPPER_AON_CLK>, + * <&turingcc TURING_Q6SS_AHBS_AON_CLK>, + * <&turingcc TURING_Q6SS_AHBM_AON_CLK>, + * <&turingcc TURING_Q6SS_Q6_AXIM_CLK>; + * clock-names = "xo", + * "sway", + * "tbu", + * "bimc", + * "ahb_aon", + * "q6ss_slave", + * "q6ss_master", + * "q6_axim"; + * resets = <&gcc GCC_CDSP_RESTART>; + * reset-names = "restart"; + * qcom,halt-regs = <&tcsr 0x19004>; + */ memory-region = <&cdsp_fw_mem>; @@ -593,118 +737,130 @@ interrupt-controller; #interrupt-cells = <2>; - blsp1_i2c0_default: blsp1-i2c0-default { + blsp1_i2c0_default: blsp1-i2c0-default-state { pins = "gpio32", "gpio33"; function = "blsp_i2c0"; }; - blsp1_i2c1_default: blsp1-i2c1-default { + blsp1_i2c1_default: blsp1-i2c1-default-state { pins = "gpio24", "gpio25"; function = "blsp_i2c1"; }; - blsp1_i2c2_default: blsp1-i2c2-default { - sda { + blsp1_i2c2_default: blsp1-i2c2-default-state { + sda-pins { pins = "gpio19"; function = "blsp_i2c_sda_a2"; }; - scl { + scl-pins { pins = "gpio20"; function = "blsp_i2c_scl_a2"; }; }; - blsp1_i2c3_default: blsp1-i2c3-default { + blsp1_i2c3_default: blsp1-i2c3-default-state { pins = "gpio84", "gpio85"; function = "blsp_i2c3"; }; - blsp1_i2c4_default: blsp1-i2c4-default { + blsp1_i2c4_default: blsp1-i2c4-default-state { pins = "gpio117", "gpio118"; function = "blsp_i2c4"; }; - blsp1_uart0_default: blsp1-uart0-default { + blsp1_uart0_default: blsp1-uart0-default-state { pins = "gpio30", "gpio31", "gpio32", "gpio33"; function = "blsp_uart0"; }; - blsp1_uart1_default: blsp1-uart1-default { + blsp1_uart1_default: blsp1-uart1-default-state { pins = "gpio22", "gpio23"; function = "blsp_uart1"; }; - blsp1_uart2_default: blsp1-uart2-default { - rx { + blsp1_uart2_default: blsp1-uart2-default-state { + rx-pins { pins = "gpio18"; function = "blsp_uart_rx_a2"; }; - tx { + tx-pins { pins = "gpio17"; function = "blsp_uart_tx_a2"; }; }; - blsp1_uart3_default: blsp1-uart3-default { - pins = "gpio82", "gpio83", "gpio84", "gpio85"; - function = "blsp_uart3"; + blsp1_uart3_default: blsp1-uart3-default-state { + cts-pins { + pins = "gpio84"; + function = "blsp_uart3"; + }; + + rts-tx-pins { + pins = "gpio85", "gpio82"; + function = "blsp_uart3"; + }; + + rx-pins { + pins = "gpio83"; + function = "blsp_uart3"; + }; }; - blsp2_i2c0_default: blsp2-i2c0-default { + blsp2_i2c0_default: blsp2-i2c0-default-state { pins = "gpio28", "gpio29"; function = "blsp_i2c5"; }; - blsp1_spi0_default: blsp1-spi0-default { + blsp1_spi0_default: blsp1-spi0-default-state { pins = "gpio30", "gpio31", "gpio32", "gpio33"; function = "blsp_spi0"; }; - blsp1_spi1_default: blsp1-spi1-default { - mosi { + blsp1_spi1_default: blsp1-spi1-default-state { + mosi-pins { pins = "gpio22"; function = "blsp_spi_mosi_a1"; }; - miso { + miso-pins { pins = "gpio23"; function = "blsp_spi_miso_a1"; }; - cs_n { + cs-n-pins { pins = "gpio24"; function = "blsp_spi_cs_n_a1"; }; - clk { + clk-pins { pins = "gpio25"; function = "blsp_spi_clk_a1"; }; }; - blsp1_spi2_default: blsp1-spi2-default { + blsp1_spi2_default: blsp1-spi2-default-state { pins = "gpio17", "gpio18", "gpio19", "gpio20"; function = "blsp_spi2"; }; - blsp1_spi3_default: blsp1-spi3-default { + blsp1_spi3_default: blsp1-spi3-default-state { pins = "gpio82", "gpio83", "gpio84", "gpio85"; function = "blsp_spi3"; }; - blsp1_spi4_default: blsp1-spi4-default { + blsp1_spi4_default: blsp1-spi4-default-state { pins = "gpio37", "gpio38", "gpio117", "gpio118"; function = "blsp_spi4"; }; - blsp2_spi0_default: blsp2-spi0-default { + blsp2_spi0_default: blsp2-spi0-default-state { pins = "gpio26", "gpio27", "gpio28", "gpio29"; function = "blsp_spi5"; }; - blsp2_uart0_default: blsp2-uart0-default { + blsp2_uart0_default: blsp2-uart0-default-state { pins = "gpio26", "gpio27", "gpio28", "gpio29"; function = "blsp_uart5"; }; @@ -715,6 +871,14 @@ reg = <0x01800000 0x80000>; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; + + clocks = <&xo_board>, + <&sleep_clk>, + <&pcie_phy>, + <0>, + <0>, + <0>; assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>; assigned-clock-rates = <19200000>; @@ -792,10 +956,11 @@ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, - <&gcc 21>; + <&gcc GCC_PCIE_0_PIPE_ARES>; reset-names = "phy", "pipe"; clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; #phy-cells = <0>; status = "disabled"; @@ -1138,7 +1303,8 @@ }; apcs_glb: mailbox@b011000 { - compatible = "qcom,qcs404-apcs-apps-global", "syscon"; + compatible = "qcom,qcs404-apcs-apps-global", + "qcom,msm8916-apcs-kpss-global", "syscon"; reg = <0x0b011000 0x1000>; #mbox-cells = <1>; clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; @@ -1305,8 +1471,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x10003000 0 0x00010000>, /* I/O */ - <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */ + ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */ + <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1322,12 +1488,12 @@ <&gcc GCC_PCIE_0_SLV_AXI_CLK>; clock-names = "iface", "aux", "master_bus", "slave_bus"; - resets = <&gcc 18>, - <&gcc 17>, - <&gcc 15>, - <&gcc 19>, + resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE_0_CORE_STICKY_ARES>, <&gcc GCC_PCIE_0_BCR>, - <&gcc 16>; + <&gcc GCC_PCIE_0_AHB_ARES>; reset-names = "axi_m", "axi_s", "axi_m_sticky", @@ -1488,7 +1654,7 @@ hysteresis = <2000>; type = "passive"; }; - cluster_crit: cluster_crit { + cluster_crit: cluster-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; @@ -1522,7 +1688,7 @@ hysteresis = <2000>; type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; @@ -1556,7 +1722,7 @@ hysteresis = <2000>; type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; @@ -1590,7 +1756,7 @@ hysteresis = <2000>; type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; @@ -1624,7 +1790,7 @@ hysteresis = <2000>; type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts new file mode 100644 index 000000000000..9e9fd4b8023e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts @@ -0,0 +1,453 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qdu1000.dtsi" +#include "pm8150.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + xo_board: xo-board-clk { + compatible = "fixed-clock"; + clock-frequency = <19200000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; +}; + +&apps_rsc { + regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vph_pwr>; + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; + vdd-l6-l9-supply = <&vreg_s6a_0p9>; + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; + vdd-l13-l16-l17-supply = <&vph_pwr>; + + vreg_s2a_0p5: smps2 { + regulator-name = "vreg_s2a_0p5"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <570000>; + }; + + vreg_s3a_1p05: smps3 { + regulator-name = "vreg_s3a_1p05"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-name = "vreg_s5a_2p0"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-name = "vreg_s6a_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s7a_1p2: smps7 { + regulator-name = "vreg_s7a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s8a_1p3: smps8 { + regulator-name = "vreg_s8a_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1a_0p91: ldo1 { + regulator-name = "vreg_l1a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2a_2p3: ldo2 { + regulator-name = "vreg_l2a_2p3"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3a_1p2: ldo3 { + regulator-name = "vreg_l3a_1p2"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-name = "vreg_l5a_0p8"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6a_0p91: ldo6 { + regulator-name = "vreg_l6a_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + + }; + + vreg_l8a_0p91: ldo8 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <888000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9a_0p91: ldo9 { + regulator-name = "vreg_l9a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10a_2p95: ldo10 { + regulator-name = "vreg_l10a_2p95"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11a_0p91: ldo11 { + regulator-name = "vreg_l11a_0p91"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l16a_1p8: ldo16 { + regulator-name = "vreg_l16a_1p8"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l17a_3p3: ldo17 { + regulator-name = "vreg_l17a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l18a_1p2: ldo18 { + regulator-name = "vreg_l18a_1p2"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&qup_i2c1_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c2_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c3_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c4_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c5_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c6_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c9_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c10_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c11_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c12_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c13_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c14_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c15_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_spi1_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi1_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi2_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi2_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi3_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi3_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi4_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi4_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi5_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi5_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi6_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi6_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi9_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi9_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi10_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi10_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi11_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi11_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi12_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi12_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi13_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi13_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi14_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi14_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi15_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi15_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_uart7_rx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + drive-strength = <2>; + bias-disable; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi new file mode 100644 index 000000000000..fb553f0bb17a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -0,0 +1,1356 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,qdu1000-gcc.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen: chosen { }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domains = <&cpufreq_hw 0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domains = <&cpufreq_hw 0>; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domains = <&cpufreq_hw 0>; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domains = <&cpufreq_hw 0>; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_OFF: cpu-sleep-0 { + compatible = "arm,idle-state"; + entry-latency-us = <274>; + exit-latency-us = <480>; + min-residency-us = <3934>; + arm,psci-suspend-param = <0x40000004>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + entry-latency-us = <584>; + exit-latency-us = <2332>; + min-residency-us = <6118>; + arm,psci-suspend-param = <0x41000044>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + entry-latency-us = <2893>; + exit-latency-us = <4023>; + min-residency-us = <9987>; + arm,psci-suspend-param = <0x41003344>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-qdu1000", "qcom,scm"; + }; + }; + + mc_virt: interconnect-0 { + compatible = "qcom,qdu1000-mc-virt"; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + clk_virt: interconnect-1 { + compatible = "qcom,qdu1000-clk-virt"; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_dt_log_mem: xbl-dt-log@80600000 { + reg = <0x0 0x80600000 0x0 0x40000>; + no-map; + }; + + xbl_ramdump_mem: xbl-ramdump@80640000 { + reg = <0x0 0x80640000 0x0 0x1c0000>; + no-map; + }; + + aop_image_mem: aop-image@80800000 { + reg = <0x0 0x80800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: aop-config@80880000 { + reg = <0x0 0x80880000 0x0 0x20000>; + no-map; + }; + + tme_crash_dump_mem: tme-crash-dump@808a0000 { + reg = <0x0 0x808a0000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: tme-log@808e0000 { + reg = <0x0 0x808e0000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: uefi-log@808e4000 { + reg = <0x0 0x808e4000 0x0 0x10000>; + no-map; + }; + + smem_mem: smem@80900000 { + compatible = "qcom,smem"; + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + cpucp_fw_mem: cpucp-fw@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + xbl_sc_mem: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0x40000>; + no-map; + }; + + tz_stat_mem: tz-stat@81d00000 { + reg = <0x0 0x81d00000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@81e00000 { + reg = <0x0 0x81e00000 0x0 0x500000>; + no-map; + }; + + qtee_mem: qtee@82300000 { + reg = <0x0 0x82300000 0x0 0x500000>; + no-map; + }; + + ta_mem: ta@82800000 { + reg = <0x0 0x82800000 0x0 0xa00000>; + no-map; + }; + + fs1_mem: fs1@83200000 { + reg = <0x0 0x83200000 0x0 0x400000>; + no-map; + }; + + fs2_mem: fs2@83600000 { + reg = <0x0 0x83600000 0x0 0x400000>; + no-map; + }; + + fs3_mem: fs3@83a00000 { + reg = <0x0 0x83a00000 0x0 0x400000>; + no-map; + }; + + /* Linux kernel image is loaded at 0x83e00000 */ + + ipa_fw_mem: ipa-fw@8be00000 { + reg = <0x0 0x8be00000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8be10000 { + reg = <0x0 0x8be10000 0x0 0x14000>; + no-map; + }; + + mpss_mem: mpss@8c000000 { + reg = <0x0 0x8c000000 0x0 0x12c00000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb@9ec00000 { + reg = <0x0 0x9ec00000 0x0 0x80000>; + no-map; + }; + + tenx_mem: tenx@a0000000 { + reg = <0x0 0xa0000000 0x0 0x19600000>; + no-map; + }; + + oem_tenx_mem: oem-tenx@b9600000 { + reg = <0x0 0xb9600000 0x0 0x6a00000>; + no-map; + }; + + tenx_q6_buffer_mem: tenx-q6-buffer@c0000000 { + reg = <0x0 0xc0000000 0x0 0x3200000>; + no-map; + }; + + ipa_buffer_mem: ipa-buffer@c3200000 { + reg = <0x0 0xc3200000 0x0 0x12c00000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@80000 { + compatible = "qcom,qdu1000-gcc"; + reg = <0x0 0x80000 0x0 0x1f4200>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + gpi_dma0: dma-controller@900000 { + compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x900000 0x0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x3f>; + iommus = <&apps_smmu 0xf6 0x0>; + #dma-cells = <3>; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x9c0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xe3 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 + &clk_virt SLAVE_QUP_CORE_0 0>; + interconnect-names = "qup-core"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart0: serial@980000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x980000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart0_default>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x984000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x984000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x988000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x988000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x98c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x98c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x990000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x990000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x994000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x994000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x998000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x998000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x99c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0xa00000 0x0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x3f>; + iommus = <&apps_smmu 0x116 0x0>; + #dma-cells = <3>; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0xac0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x103 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart8_default>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa84000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa84000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa88000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa8c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa8c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa90000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa90000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa94000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c13_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa94000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart13_default>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa94000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa98000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c14_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa98000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa9c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c15_data_clk>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa9c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + pinctrl-names = "default"; + status = "disabled"; + }; + }; + + system_noc: interconnect@1640000 { + compatible = "qcom,qdu1000-system-noc"; + reg = <0x0 0x1640000 0x0 0x45080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x1f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,qdu1000-pdc", "qcom,pdc"; + reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>; + qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, + <94 609 31>, <125 63 1>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + spmi_bus: spmi@c400000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0xc400000 0x0 0x3000>, + <0x0 0xc500000 0x0 0x400000>, + <0x0 0xc440000 0x0 0x80000>, + <0x0 0xc4c0000 0x0 0x10000>, + <0x0 0xc42d000 0x0 0x4000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f000000 { + compatible = "qcom,qdu1000-tlmm"; + reg = <0x0 0xf000000 0x0 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + wakeup-parent = <&pdc>; + + qup_uart0_default: qup-uart0-default-state { + pins = "gpio6", "gpio7", "gpio8", "gpio9"; + function = "qup00"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + pins = "gpio10", "gpio11"; + function = "qup01"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + pins = "gpio10", "gpio11", "gpio12"; + function = "qup01"; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio13"; + function = "gpio"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + pins = "gpio12", "gpio13"; + function = "qup02"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + pins = "gpio12", "gpio13", "gpio10"; + function = "qup02"; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio11"; + function = "gpio"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + pins = "gpio14", "gpio15"; + function = "qup03"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + pins = "gpio14", "gpio15", "gpio16"; + function = "qup03"; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio17"; + function = "gpio"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + pins = "gpio16", "gpio17"; + function = "qup04"; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + pins = "gpio16", "gpio17", "gpio14"; + function = "qup04"; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio15"; + function = "gpio"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + pins = "gpio130", "gpio131"; + function = "qup05"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + pins = "gpio130", "gpio131", "gpio132"; + function = "qup05"; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio133"; + function = "gpio"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + pins = "gpio132", "gpio133"; + function = "qup06"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + pins = "gpio132", "gpio133", "gpio130"; + function = "qup06"; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio131"; + function = "gpio"; + }; + + qup_uart7_rx: qup-uart7-rx-state { + pins = "gpio135"; + function = "qup07"; + }; + + qup_uart7_tx: qup-uart7-tx-state { + pins = "gpio134"; + function = "qup07"; + }; + + qup_uart8_default: qup-uart8-default-state { + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + function = "qup10"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + pins = "gpio22", "gpio23"; + function = "qup11"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + pins = "gpio22", "gpio23", "gpio24"; + function = "qup11"; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio25"; + function = "gpio"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + pins = "gpio24", "gpio25"; + function = "qup12"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + pins = "gpio24", "gpio25", "gpio22"; + function = "qup12"; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio23"; + function = "gpio"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + pins = "gpio26", "gpio27"; + function = "qup13"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + pins = "gpio26", "gpio27", "gpio28"; + function = "qup13"; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio29"; + function = "gpio"; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + pins = "gpio28", "gpio29"; + function = "qup14"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + pins = "gpio28", "gpio29", "gpio26"; + function = "qup14"; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio27"; + function = "gpio"; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + pins = "gpio30", "gpio31"; + function = "qup15"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + pins = "gpio30", "gpio31", "gpio32"; + function = "qup15"; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio33"; + function = "gpio"; + }; + + qup_uart13_default: qup-uart13-default-state { + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + function = "qup15"; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + pins = "gpio34", "gpio35"; + function = "qup16"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + pins = "gpio34", "gpio35", "gpio36"; + function = "qup16"; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio37", "gpio38"; + function = "gpio"; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + pins = "gpio40", "gpio41"; + function = "qup17"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + pins = "gpio40", "gpio41", "gpio30"; + function = "qup17"; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio31"; + function = "gpio"; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,qdu1000-smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17200000 0x0 0x10000>, /* GICD */ + <0x0 0x17260000 0x0 0x80000>; /* GICR * 4 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17420000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + frame@17421000 { + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@17423000 { + reg = <0x17423000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@17425000 { + reg = <0x17425000 0x1000>, + <0x17426000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@17427000 { + reg = <0x17427000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@17429000 { + reg = <0x17429000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@1742b000 { + reg = <0x1742b000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@1742d000 { + reg = <0x1742d000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 0>; + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,qdu1000-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,qdu1000-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d90000 { + compatible = "qcom,qdu1000-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0x0 0x17d90000 0x0 0x1000>, <0x0 0x17d91000 0x0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + gem_noc: interconnect@19100000 { + compatible = "qcom,qdu1000-gem-noc"; + reg = <0x0 0x19100000 0x0 0xB8080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + system-cache-controller@19200000 { + compatible = "qcom,qdu1000-llcc"; + reg = <0 0x19200000 0 0xd80000>, + <0 0x1a200000 0 0x80000>, + <0 0x221c8128 0 0x4>; + reg-names = "llcc_base", + "llcc_broadcast_base", + "multi_channel_register"; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + multi-ch-bit-off = <24 2>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts new file mode 100644 index 000000000000..ef3616093289 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + */ + +/dts-v1/; + +#include "qcm2290.dtsi" +#include "pm2250.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Robotics RB1"; + compatible = "qcom,qrb2210-rb1", "qcom,qrb2210", "qcom,qcm2290"; + + aliases { + serial0 = &uart0; + sdhc1 = &sdhc_1; + sdhc2 = &sdhc_2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&key_volp_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 96 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; +}; + +&pm2250_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + non-removable; + supports-cqe; + no-sdio; + no-sd; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdc2_state_on &sd_det_in_on>; + pinctrl-1 = <&sdc2_state_off &sd_det_in_off>; + pinctrl-names = "default", "sleep"; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + sd_det_in_on: sd-det-in-on-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sd_det_in_off: sd-det-in-off-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + key_volp_n: key-volp-n-state { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; + output-disable; + }; +}; + +/* UART connected to the Micro-USB port via a FTDI chip */ +&uart0 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_hsphy { + status = "okay"; +}; + +&xo_board { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts new file mode 100644 index 000000000000..dc80f0bca767 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include "sm4250.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QRB4210 RB2"; + compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250"; + + aliases { + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm6125-regulators"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>; + vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>; + vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>; + vdd-l6-l8-supply = <&vreg_s5a_0p848>; + vdd-l9-l11-supply = <&vreg_s7a_2p04>; + vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>; + vdd-l12-l16-supply = <&vreg_s7a_2p04>; + vdd-l23-l24-supply = <&vph_pwr>; + + vreg_s5a_0p848: s5 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s6a_1p352: s6 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1456000>; + }; + + vreg_s7a_2p04: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2080000>; + }; + + vreg_l1a_1p0: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + vreg_l4a_0p9: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_2p96: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3056000>; + }; + + vreg_l6a_0p6: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a_1p256: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l8a_0p664: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l11a_1p8: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + vreg_l13a_1p8: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a_3p128: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a_1p3: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1384000>; + }; + + vreg_l18a_1p232: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1312000>; + }; + + vreg_l19a_1p8: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l20a_1p8: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l21a_2p704: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + }; + + vreg_l22a_2p96: l22 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l24a_2p96: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3600000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&vreg_l24a_2p96>; + vqmmc-supply = <&vreg_l11a_1p8>; + no-sdio; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */ + vmmc-supply = <&vreg_l22a_2p96>; + vqmmc-supply = <&vreg_l5a_2p96>; + no-sdio; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <37 5>, <43 2>, <47 1>, + <49 1>, <52 1>, <54 1>, + <56 3>, <61 2>, <64 1>, + <68 1>, <72 8>, <96 1>; +}; + +&uart4 { + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts new file mode 100644 index 000000000000..bb149e577914 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Ltd. + */ + +/dts-v1/; + +#include "qrb5165-rb5.dts" + +&camcc { + status = "okay"; +}; + +&camss { + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + status = "okay"; + + ports { + /* The port index denotes CSIPHY id i.e. csiphy2 */ + port@2 { + csiphy2_ep: endpoint { + clock-lanes = <7>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&imx577_ep>; + }; + }; + }; +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c0 { + camera@1a { + compatible = "sony,imx577"; + reg = <0x1a>; + + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&cam2_default>; + pinctrl-1 = <&cam2_suspend>; + + clocks = <&camcc CAM_CC_MCLK2_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>; + assigned-clock-rates = <24000000>; + + dovdd-supply = <&vreg_l7f_1p8>; + avdd-supply = <&vdc_5v>; + dvdd-supply = <&vdc_5v>; + + port { + imx577_ep: endpoint { + clock-lanes = <1>; + link-frequencies = /bits/ 64 <600000000>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csiphy2_ep>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index bf8077a1cf9a..dd924331b0ee 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -238,7 +238,7 @@ }; &apps_rsc { - pm8009-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8009-1-rpmh-regulators"; qcom,pmic-id = "f"; @@ -284,7 +284,7 @@ }; }; - pm8150-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -417,7 +417,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -867,7 +867,7 @@ }; &q6afedai { - qi2s@16 { + dai@16 { reg = <PRIMARY_MI2S_RX>; qcom,sd-lines = <0 1 2 3>; }; @@ -875,7 +875,7 @@ /* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { - qi2s@20 { + dai@20 { reg = <TERTIARY_MI2S_RX>; qcom,sd-lines = <0>; }; @@ -904,7 +904,7 @@ cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; bus-width = <4>; no-sdio; - no-emmc; + no-mmc; }; &sound { @@ -1007,19 +1007,21 @@ }; &swr0 { - left_spkr: wsa8810-left{ + status = "okay"; + + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; - powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; }; - right_spkr: wsa8810-right{ + right_spkr: speaker@0,4 { compatible = "sdw10217211000"; reg = <0 4>; - powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight"; #sound-dai-cells = <0>; @@ -1210,33 +1212,33 @@ "HST_WLAN_UART_TX", "HST_WLAN_UART_RX"; - lt9611_irq_pin: lt9611-irq { + lt9611_irq_pin: lt9611-irq-state { pins = "gpio63"; function = "gpio"; bias-disable; }; - sdc2_default_state: sdc2-default { - clk { + sdc2_default_state: sdc2-default-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; - sdc2_card_det_n: sd-card-det-n { + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio77"; function = "gpio"; bias-pull-up; @@ -1322,6 +1324,10 @@ status = "okay"; }; +&wsamacro { + status = "okay"; +}; + /* PINCTRL - additions to nodes defined in sm8250.dtsi */ &qup_spi0_cs_gpio { drive-strength = <6>; diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts new file mode 100644 index 000000000000..2cc893ae4d10 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts @@ -0,0 +1,453 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qru1000.dtsi" +#include "pm8150.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QRU1000 IDP"; + compatible = "qcom,qru1000-idp", "qcom,qru1000"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + xo_board: xo-board-clk { + compatible = "fixed-clock"; + clock-frequency = <19200000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; +}; + +&apps_rsc { + regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vph_pwr>; + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; + vdd-l6-l9-supply = <&vreg_s6a_0p9>; + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; + vdd-l13-l16-l17-supply = <&vph_pwr>; + + vreg_s2a_0p5: smps2 { + regulator-name = "vreg_s2a_0p5"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <570000>; + }; + + vreg_s3a_1p05: smps3 { + regulator-name = "vreg_s3a_1p05"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-name = "vreg_s5a_2p0"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-name = "vreg_s6a_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s7a_1p2: smps7 { + regulator-name = "vreg_s7a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s8a_1p3: smps8 { + regulator-name = "vreg_s8a_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1a_0p91: ldo1 { + regulator-name = "vreg_l1a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2a_2p3: ldo2 { + regulator-name = "vreg_l2a_2p3"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3a_1p2: ldo3 { + regulator-name = "vreg_l3a_1p2"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-name = "vreg_l5a_0p8"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6a_0p91: ldo6 { + regulator-name = "vreg_l6a_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + + }; + + vreg_l8a_0p91: ldo8 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <888000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9a_0p91: ldo9 { + regulator-name = "vreg_l9a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10a_2p95: ldo10 { + regulator-name = "vreg_l10a_2p95"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11a_0p91: ldo11 { + regulator-name = "vreg_l11a_0p91"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l16a_1p8: ldo16 { + regulator-name = "vreg_l16a_1p8"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l17a_3p3: ldo17 { + regulator-name = "vreg_l17a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l18a_1p2: ldo18 { + regulator-name = "vreg_l18a_1p2"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&qup_i2c1_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c2_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c3_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c4_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c5_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c6_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c9_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c10_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c11_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c12_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c13_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c14_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_i2c15_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_spi1_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi1_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi2_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi2_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi3_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi3_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi4_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi4_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi5_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi5_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi6_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi6_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi9_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi9_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi10_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi10_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi11_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi11_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi12_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi12_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi13_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi13_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi14_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi14_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi15_cs { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi15_data_clk { + drive-strength = <6>; + bias-disable; +}; + +&qup_uart7_rx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + drive-strength = <2>; + bias-disable; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi new file mode 100644 index 000000000000..eac5dc54a8ab --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include "qdu1000.dtsi" +/delete-node/ &tenx_mem; +/delete-node/ &oem_tenx_mem; +/delete-node/ &tenx_q6_buffer_mem; + +&reserved_memory { + oem_tenx_mem: oem-tenx@a0000000 { + reg = <0x0 0xa0000000 0x0 0x6400000>; + no-map; + }; + + mpss_diag_buffer_mem: mpss-diag-buffer@aea00000 { + reg = <0x0 0xaea00000 0x0 0x6400000>; + no-map; + }; + + tenx_q6_buffer_mem: tenx-q6-buffer@b4e00000 { + reg = <0x0 0xb4e00000 0x0 0x3200000>; + no-map; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 87ab0e1ecd16..15e1ae1c1a97 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -7,7 +7,7 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/gpio/gpio.h> -#include "sm8150.dtsi" +#include "sa8155p.dtsi" #include "pmm8155au_1.dtsi" #include "pmm8155au_2.dtsi" @@ -17,13 +17,14 @@ aliases { serial0 = &uart2; + serial1 = &uart9; }; chosen { stdout-path = "serial0:115200n8"; }; - vreg_3p3: vreg_3p3_regulator { + vreg_3p3: vreg-3p3-regulator { compatible = "regulator-fixed"; regulator-name = "vreg_3p3"; regulator-min-microvolt = <3300000>; @@ -43,7 +44,6 @@ regulator-always-on; regulator-boot-on; - regulator-allow-set-load; vin-supply = <&vreg_3p3>; }; @@ -73,7 +73,7 @@ }; &apps_rsc { - pmm8155au-1-rpmh-regulators { + regulators-0 { compatible = "qcom,pmm8155au-rpmh-regulators"; qcom,pmic-id = "a"; @@ -137,6 +137,8 @@ regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7a_1p8: ldo7 { @@ -152,6 +154,8 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l11a_0p8: ldo11 { @@ -198,7 +202,7 @@ }; }; - pmm8155au-2-rpmh-regulators { + regulators-1 { compatible = "qcom,pmm8155au-rpmh-regulators"; qcom,pmic-id = "c"; @@ -258,6 +262,8 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_1p8: ldo7 { @@ -273,6 +279,8 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p3: ldo10 { @@ -386,13 +394,17 @@ vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ bus-width = <4>; no-sdio; - no-emmc; + no-mmc; }; &uart2 { status = "okay"; }; +&uart9 { + status = "okay"; +}; + &ufs_mem_hc { status = "okay"; @@ -477,26 +489,26 @@ &tlmm { gpio-reserved-ranges = <0 4>; - sdc2_on: sdc2_on { - clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; bias-disable; /* No pull */ drive-strength = <16>; /* 16 MA */ }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; /* pull up */ drive-strength = <16>; /* 16 MA */ }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; /* pull up */ drive-strength = <16>; /* 16 MA */ }; - sd-cd { + sd-cd-pins { pins = "gpio96"; function = "gpio"; bias-pull-up; /* pull up */ @@ -504,26 +516,26 @@ }; }; - sdc2_off: sdc2_off { - clk { + sdc2_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; bias-disable; /* No pull */ drive-strength = <2>; /* 2 MA */ }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - sd-cd { + sd-cd-pins { pins = "gpio96"; function = "gpio"; bias-pull-up; /* pull up */ @@ -531,66 +543,62 @@ }; }; - usb2phy_ac_en1_default: usb2phy_ac_en1_default { - mux { - pins = "gpio113"; - function = "usb2phy_ac"; - bias-disable; - drive-strength = <2>; - }; + usb2phy_ac_en1_default: usb2phy-ac-en1-default-state { + pins = "gpio113"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; }; - usb2phy_ac_en2_default: usb2phy_ac_en2_default { - mux { - pins = "gpio123"; - function = "usb2phy_ac"; - bias-disable; - drive-strength = <2>; - }; + usb2phy_ac_en2_default: usb2phy-ac-en2-default-state { + pins = "gpio123"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; }; - ethernet_defaults: ethernet-defaults { - mdc { + ethernet_defaults: ethernet-defaults-state { + mdc-pins { pins = "gpio7"; function = "rgmii"; bias-pull-up; }; - mdio { + mdio-pins { pins = "gpio59"; function = "rgmii"; bias-pull-up; }; - rgmii-rx { + rgmii-rx-pins { pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116"; function = "rgmii"; bias-disable; drive-strength = <2>; }; - rgmii-tx { + rgmii-tx-pins { pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121"; function = "rgmii"; bias-pull-up; drive-strength = <16>; }; - phy-intr { + phy-intr-pins { pins = "gpio124"; function = "emac_phy"; bias-disable; drive-strength = <8>; }; - pps { + pps-pins { pins = "gpio81"; function = "emac_pps"; bias-disable; drive-strength = <8>; }; - phy-reset { + phy-reset-pins { pins = "gpio79"; function = "gpio"; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sa8155p.dtsi b/arch/arm64/boot/dts/qcom/sa8155p.dtsi new file mode 100644 index 000000000000..ffb7ab695213 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8155p.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + * + * SA8155P is an automotive variant of SM8150, with some minor changes. + * Most notably, the RPMhPD setup differs: MMCX and LCX/LMX rails are gone, + * though the cmd-db doesn't reflect that and access attemps result in a bite. + */ + +#include "sm8150.dtsi" + +&dispcc { + power-domains = <&rpmhpd SA8155P_CX>; +}; + +&mdss_dsi0 { + power-domains = <&rpmhpd SA8155P_CX>; +}; + +&mdss_dsi1 { + power-domains = <&rpmhpd SA8155P_CX>; +}; + +&mdss_mdp { + power-domains = <&rpmhpd SA8155P_CX>; +}; + +&remoteproc_slpi { + power-domains = <&rpmhpd SA8155P_CX>, + <&rpmhpd SA8155P_MX>; +}; + +&rpmhpd { + /* + * The bindings were crafted such that SA8155P PDs match their + * SM8150 counterparts to make it more maintainable and only + * necessitate adjusting entries that actually differ + */ + compatible = "qcom,sa8155p-rpmhpd"; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index b608b82dff03..fd253942e5e5 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -11,22 +11,107 @@ #include <dt-bindings/spmi/spmi.h> #include "sa8540p.dtsi" +#include "sa8540p-pmics.dtsi" / { model = "Qualcomm SA8295P ADP"; compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; aliases { - serial0 = &qup2_uart17; + serial0 = &uart17; }; chosen { stdout-path = "serial0:115200n8"; }; + + dp2-connector { + compatible = "dp-connector"; + label = "DP2"; + type = "mini"; + + hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + + port { + dp2_connector_in: endpoint { + remote-endpoint = <&mdss1_dp0_phy_out>; + }; + }; + }; + + dp3-connector { + compatible = "dp-connector"; + label = "DP3"; + type = "mini"; + + hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + + port { + dp3_connector_in: endpoint { + remote-endpoint = <&mdss1_dp1_phy_out>; + }; + }; + }; + + edp0-connector { + compatible = "dp-connector"; + label = "EDP0"; + type = "mini"; + + hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + + port { + edp0_connector_in: endpoint { + remote-endpoint = <&mdss0_dp2_phy_out>; + }; + }; + }; + + edp1-connector { + compatible = "dp-connector"; + label = "EDP1"; + type = "mini"; + + hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + + port { + edp1_connector_in: endpoint { + remote-endpoint = <&mdss0_dp3_phy_out>; + }; + }; + }; + + edp2-connector { + compatible = "dp-connector"; + label = "EDP2"; + type = "mini"; + + hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + + port { + edp2_connector_in: endpoint { + remote-endpoint = <&mdss1_dp2_phy_out>; + }; + }; + }; + + edp3-connector { + compatible = "dp-connector"; + label = "EDP3"; + type = "mini"; + + hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + port { + edp3_connector_in: endpoint { + remote-endpoint = <&mdss1_dp3_phy_out>; + }; + }; + }; }; &apps_rsc { - pmm8540-a-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -57,9 +142,16 @@ regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_l11a: ldo11 { + regulator-name = "vreg_l11a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; }; - pmm8540-c-regulators { + regulators-1 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "c"; @@ -83,6 +175,8 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c: ldo4 { @@ -98,6 +192,8 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c: ldo7 { @@ -113,6 +209,8 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l17c: ldo17 { @@ -121,10 +219,12 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; }; - pmm8540-g-regulators { + regulators-2 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "g"; @@ -144,107 +244,262 @@ vreg_l8g: ldo8 { regulator-name = "vreg_l8g"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11g: ldo11 { + regulator-name = "vreg_l11g"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; }; -&qup2 { +&dispcc0 { status = "okay"; }; -&qup2_uart17 { - compatible = "qcom,geni-debug-uart"; +&dispcc1 { status = "okay"; }; -&remoteproc_adsp { - firmware-name = "qcom/sa8540p/adsp.mbn"; +&mdss0 { status = "okay"; }; -&remoteproc_nsp0 { - firmware-name = "qcom/sa8540p/cdsp.mbn"; +&mdss0_dp2 { + data-lanes = <0 1 2 3>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss0_dp2_phy_out: endpoint { + remote-endpoint = <&edp0_connector_in>; + }; + }; + }; }; -&remoteproc_nsp1 { - firmware-name = "qcom/sa8540p/cdsp1.mbn"; +&mdss0_dp2_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + status = "okay"; }; -&spmi_bus { - pm8450a: pmic@0 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; +&mdss0_dp3 { + data-lanes = <0 1 2 3>; + + status = "okay"; - pm8450a_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8450a_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; + ports { + port@1 { + reg = <1>; + mdss0_dp3_phy_out: endpoint { + remote-endpoint = <&edp1_connector_in>; + }; }; }; +}; - pm8450c: pmic@4 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x4 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450c_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8450c_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; +&mdss0_dp3_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss1 { + status = "okay"; +}; + +&mdss1_dp0 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss1_dp0_phy_out: endpoint { + remote-endpoint = <&dp2_connector_in>; + }; }; }; +}; - pm8450e: pmic@8 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x8 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450e_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8450e_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; +&mdss1_dp0_phy { + vdda-phy-supply = <&vreg_l11g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss1_dp1 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss1_dp1_phy_out: endpoint { + remote-endpoint = <&dp3_connector_in>; + }; + }; + }; +}; + +&mdss1_dp1_phy { + vdda-phy-supply = <&vreg_l11g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss1_dp2 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss1_dp2_phy_out: endpoint { + remote-endpoint = <&edp2_connector_in>; + }; }; }; +}; + +&mdss1_dp2_phy { + vdda-phy-supply = <&vreg_l11g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; - pm8450g: pmic@c { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0xc SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450g_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8450g_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; +&mdss1_dp3 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss1_dp3_phy_out: endpoint { + remote-endpoint = <&edp3_connector_in>; + }; }; }; }; +&mdss1_dp3_phy { + vdda-phy-supply = <&vreg_l11g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&pcie2a { + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; + + status = "okay"; +}; + +&pcie2a_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + +&pcie3a { + num-lanes = <2>; + + perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie3a_default>; + + status = "okay"; +}; + +&pcie3a_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + +&pcie3b { + perst-gpios = <&tlmm 153 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie3b_default>; + + status = "okay"; +}; + +&pcie3b_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie4_default>; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sa8540p/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sa8540p/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_nsp1 { + firmware-name = "qcom/sa8540p/cdsp1.mbn"; + status = "okay"; +}; + +&uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; @@ -380,3 +635,97 @@ }; /* PINCTRL */ + +&tlmm { + pcie2a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio142"; + function = "pcie2a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3a_default: pcie3a-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie3a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3b_default: pcie3b-default-state { + clkreq-n-pins { + pins = "gpio152"; + function = "pcie3b_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio153"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio130"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio140"; + function = "pcie4_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio141"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio139"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi new file mode 100644 index 000000000000..1221be89b3de --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmm8540a: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + wakeup-source; + }; + + pmm8540a_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmm8540a_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8540c: pmic@4 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8540c_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmm8540c_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8540e: pmic@8 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8540e_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmm8540e_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8540g: pmic@c { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8540g_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmm8540g_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts new file mode 100644 index 000000000000..24fa449d48a6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -0,0 +1,404 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sa8540p.dtsi" +#include "sa8540p-pmics.dtsi" + +/ { + model = "Qualcomm SA8540P Ride"; + compatible = "qcom,sa8540p-ride", "qcom,sa8540p"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c12 = &i2c12; + i2c15 = &i2c15; + i2c18 = &i2c18; + serial0 = &uart17; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a: ldo11 { + regulator-name = "vreg_l11a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a: ldo13 { + regulator-name = "vreg_l13a"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17c: ldo17 { + regulator-name = "vreg_l17c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + regulators-2 { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "g"; + + vreg_l3g: ldo3 { + regulator-name = "vreg_l3g"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7g: ldo7 { + regulator-name = "vreg_l7g"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8g: ldo8 { + regulator-name = "vreg_l8g"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default>; + + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default>; + + status = "okay"; +}; + +&i2c12 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_default>; + + status = "okay"; +}; + +&i2c15 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c15_default>; + + status = "okay"; +}; + +&i2c18 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c18_default>; + + status = "okay"; +}; + +&pcie2a { + ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>, + <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>, + <0x03000000 0x5 0x00000000 0x5 0x00000000 0x1 0x00000000>; + + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; + + status = "okay"; +}; + +&pcie2a_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + +&pcie3a { + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x20000000>, + <0x03000000 0x6 0x00000000 0x6 0x00000000 0x2 0x00000000>; + + perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie3a_default>; + + status = "okay"; +}; + +&pcie3a_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + +&qup0 { + status = "okay"; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sa8540p/cdsp0.mbn"; + status = "okay"; +}; + +&remoteproc_nsp1 { + firmware-name = "qcom/sa8540p/cdsp1.mbn"; + status = "okay"; +}; + +&uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17c>; + vccq-supply = <&vreg_l6c>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7a>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_2_hsphy0 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_qmpphy0 { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&tlmm { + i2c0_default: i2c0-default-state { + /* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */ + pins = "gpio135", "gpio136"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c1_default: i2c1-default-state { + /* To PM40028B-F3EI PCIe switch */ + pins = "gpio158", "gpio159"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c12_default: i2c12-default-state { + /* To Maxim max20411 */ + pins = "gpio0", "gpio1"; + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c15_default: i2c15-default-state { + /* To display connector (SIP1 only) */ + pins = "gpio36", "gpio37"; + function = "qup15"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c18_default: i2c18-default-state { + /* To ASM330LHH IMU (SIP1 only) */ + pins = "gpio66", "gpio67"; + function = "qup18"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie2a_default: pcie2a-default-state { + perst-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio142"; + function = "pcie2a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3a_default: pcie3a-default-state { + perst-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio150"; + function = "pcie3a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi index 8ea2886fbab2..4a990fda8fc3 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi @@ -10,124 +10,222 @@ /delete-node/ &cpu4_opp_table; / { - cpu0_opp_table: cpu0-opp-table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <(300000 * 32)>; + }; opp-403200000 { opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <(384000 * 32)>; }; opp-499200000 { opp-hz = /bits/ 64 <499200000>; + opp-peak-kBps = <(480000 * 32)>; }; opp-595200000 { opp-hz = /bits/ 64 <595200000>; + opp-peak-kBps = <(576000 * 32)>; }; opp-710400000 { opp-hz = /bits/ 64 <710400000>; + opp-peak-kBps = <(672000 * 32)>; }; opp-806400000 { opp-hz = /bits/ 64 <806400000>; + opp-peak-kBps = <(768000 * 32)>; }; opp-902400000 { opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <(864000 * 32)>; }; opp-1017600000 { opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <(960000 * 32)>; }; opp-1113600000 { opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <(1075200 * 32)>; }; opp-1209600000 { opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <(1171200 * 32)>; }; opp-1324800000 { opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <(1286400 * 32)>; }; opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; + opp-peak-kBps = <(1382400 * 32)>; }; opp-1555200000 { opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <(1497600 * 32)>; }; opp-1670400000 { opp-hz = /bits/ 64 <1670400000>; + opp-peak-kBps = <(1593600 * 32)>; }; opp-1785600000 { opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <(1708800 * 32)>; }; opp-1881600000 { opp-hz = /bits/ 64 <1881600000>; + opp-peak-kBps = <(1708800 * 32)>; }; opp-2016000000 { opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <(1708800 * 32)>; }; opp-2131200000 { opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <(1708800 * 32)>; }; opp-2246400000 { opp-hz = /bits/ 64 <2246400000>; + opp-peak-kBps = <(1708800 * 32)>; }; }; - cpu4_opp_table: cpu4-opp-table { + cpu4_opp_table: opp-table-cpu4 { compatible = "operating-points-v2"; opp-shared; opp-825600000 { opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <(300000 * 32)>; }; opp-940800000 { opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <(864000 * 32)>; }; opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <(960000 * 32)>; }; opp-1171200000 { opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <(1171200 * 32)>; }; opp-1286400000 { opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <(1286400 * 32)>; }; opp-1401600000 { opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <(1382400 * 32)>; }; opp-1516800000 { opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <(1497600 * 32)>; }; opp-1632000000 { opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <(1593600 * 32)>; }; opp-1747200000 { opp-hz = /bits/ 64 <1747200000>; + opp-peak-kBps = <(1593600 * 32)>; }; opp-1862400000 { opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <(1708800 * 32)>; }; opp-1977600000 { opp-hz = /bits/ 64 <1977600000>; + opp-peak-kBps = <(1708800 * 32)>; }; opp-2073600000 { opp-hz = /bits/ 64 <2073600000>; + opp-peak-kBps = <(1708800 * 32)>; }; opp-2169600000 { opp-hz = /bits/ 64 <2169600000>; + opp-peak-kBps = <(1708800 * 32)>; }; opp-2284800000 { opp-hz = /bits/ 64 <2284800000>; + opp-peak-kBps = <(1708800 * 32)>; }; opp-2380800000 { opp-hz = /bits/ 64 <2380800000>; + opp-peak-kBps = <(1708800 * 32)>; }; opp-2496000000 { opp-hz = /bits/ 64 <2496000000>; + opp-peak-kBps = <(1708800 * 32)>; }; opp-2592000000 { opp-hz = /bits/ 64 <2592000000>; + opp-peak-kBps = <(1708800 * 32)>; }; }; }; +&pcie2a { + compatible = "qcom,pcie-sa8540p"; + + linux,pci-domain = <0>; + + interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; +}; + +&pcie2b { + compatible = "qcom,pcie-sa8540p"; + + linux,pci-domain = <1>; + + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; +}; + +&pcie3a { + compatible = "qcom,pcie-sa8540p"; + reg = <0x0 0x01c10000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf1d>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x1000>, + <0x0 0x40100000 0x0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1d00000>; + + linux,pci-domain = <2>; + + interrupts = <GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>; +}; + +&pcie3b { + compatible = "qcom,pcie-sa8540p"; + + linux,pci-domain = <3>; + + interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; +}; + +&pcie4 { + compatible = "qcom,pcie-sa8540p"; + + linux,pci-domain = <4>; + + interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; +}; + &rpmhpd { compatible = "qcom,sa8540p-rpmhpd"; }; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi new file mode 100644 index 000000000000..7602cca47bae --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmm8654au_0_thermal: pm8775-0-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_0_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmm8654au_1_thermal: pm8775-1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_1_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmm8654au_2_thermal: pm8775-2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_2_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmm8654au_3_thermal: pm8775-3-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_3_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmm8654au_0: pmic@0 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x0 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_0_pon: pon@1200 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1200>, <0x800>; + reg-names = "hlos", "pbs"; + mode-recovery = <0x1>; + mode-bootloader = <0x2>; + + pmm8654au_0_pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts-extended = <&spmi_bus 0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + debounce = <15625>; + }; + + pmm8654au_0_pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts-extended = <&spmi_bus 0x0 0x12 0x6 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + status = "disabled"; + }; + }; + + pmm8654au_0_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_0_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8654au_1: pmic@2 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_1_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_2_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8654au_2: pmic@4 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_2_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_2_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_2_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8654au_3: pmic@6 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_3_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_3_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_3_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts new file mode 100644 index 000000000000..f238a02a5448 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -0,0 +1,431 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sa8775p.dtsi" +#include "sa8775p-pmics.dtsi" + +/ { + model = "Qualcomm SA8775P Ride"; + compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; + + aliases { + serial0 = &uart10; + serial1 = &uart12; + serial2 = &uart17; + i2c18 = &i2c18; + spi16 = &spi16; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s4a: smps4 { + regulator-name = "vreg_s4a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1816000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a: smps5 { + regulator-name = "vreg_s5a"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1996000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9a: smps9 { + regulator-name = "vreg_s9a"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* + * FIXME: This should have regulator-allow-set-load but + * we're getting an over-current fault from the PMIC + * when switching to LPM. + */ + }; + + vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e: smps4 { + regulator-name = "vreg_s4e"; + regulator-min-microvolt = <970000>; + regulator-max-microvolt = <1520000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7e: smps7 { + regulator-name = "vreg_s7e"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9e: smps9 { + regulator-name = "vreg_s9e"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <570000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&i2c18 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c18_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pmm8654au_0_gpios { + gpio-line-names = "DS_EN", + "POFF_COMPLETE", + "UFS0_VER_ID", + "FAST_POFF", + "DBU1_PON_DONE", + "AOSS_SLEEP", + "CAM_DES0_EN", + "CAM_DES1_EN", + "CAM_DES2_EN", + "CAM_DES3_EN", + "UEFI", + "ANALOG_PON_OPT"; +}; + +&pmm8654au_1_gpios { + gpio-line-names = "PMIC_C_ID0", + "PMIC_C_ID1", + "UFS1_VER_ID", + "IPA_PWR", + "", + "WLAN_DBU4_EN", + "WLAN_EN", + "BT_EN", + "USB2_PWR_EN", + "USB2_FAULT"; +}; + +&pmm8654au_2_gpios { + gpio-line-names = "PMIC_E_ID0", + "PMIC_E_ID1", + "USB0_PWR_EN", + "USB0_FAULT", + "SENSOR_IRQ_1", + "SENSOR_IRQ_2", + "SENSOR_RST", + "SGMIIO0_RST", + "SGMIIO1_RST", + "USB1_PWR_ENABLE", + "USB1_FAULT", + "VMON_SPX8"; +}; + +&pmm8654au_3_gpios { + gpio-line-names = "PMIC_G_ID0", + "PMIC_G_ID1", + "GNSS_RST", + "GNSS_EN", + "GNSS_BOOT_MODE"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&spi16 { + pinctrl-0 = <&qup_spi16_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + qup_uart10_default: qup-uart10-state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + + qup_spi16_default: qup-spi16-state { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c18_default: qup-i2c18-state { + pins = "gpio95", "gpio96"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart12_default: qup-uart12-state { + qup_uart12_cts: qup-uart12-cts-pins { + pins = "gpio52"; + function = "qup1_se5"; + bias-disable; + }; + + qup_uart12_rts: qup-uart12-rts-pins { + pins = "gpio53"; + function = "qup1_se5"; + bias-pull-down; + }; + + qup_uart12_tx: qup-uart12-tx-pins { + pins = "gpio54"; + function = "qup1_se5"; + bias-pull-up; + }; + + qup_uart12_rx: qup-uart12-rx-pins { + pins = "gpio55"; + function = "qup1_se5"; + bias-pull-down; + }; + }; + + qup_uart17_default: qup-uart17-state { + qup_uart17_cts: qup-uart17-cts-pins { + pins = "gpio91"; + function = "qup2_se3"; + bias-disable; + }; + + qup_uart17_rts: qup0-uart17-rts-pins { + pins = "gpio92"; + function = "qup2_se3"; + bias-pull-down; + }; + + qup_uart17_tx: qup0-uart17-tx-pins { + pins = "gpio93"; + function = "qup2_se3"; + bias-pull-up; + }; + + qup_uart17_rx: qup0-uart17-rx-pins { + pins = "gpio94"; + function = "qup2_se3"; + bias-pull-down; + }; + }; +}; + +&uart10 { + compatible = "qcom,geni-debug-uart"; + pinctrl-0 = <&qup_uart10_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart12 { + pinctrl-0 = <&qup_uart12_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart17 { + pinctrl-0 = <&qup_uart17_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi new file mode 100644 index 000000000000..c3310caf9f68 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -0,0 +1,1001 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sa8775p-gcc.h> +#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x200>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x300>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@10000 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10000>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_1>; + L3_1: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + + }; + }; + + CPU5: cpu@10100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10100>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_5>; + L2_5: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_1>; + }; + }; + + CPU6: cpu@10200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10200>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_6>; + L2_6: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_1>; + }; + }; + + CPU7: cpu@10300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10300>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_7>; + L2_7: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_1>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sa8775p", "qcom,scm"; + }; + }; + + aggre1_noc: interconnect-aggre1-noc { + compatible = "qcom,sa8775p-aggre1-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect-aggre2-noc { + compatible = "qcom,sa8775p-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sa8775p-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect-config-noc { + compatible = "qcom,sa8775p-config-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect-dc-noc { + compatible = "qcom,sa8775p-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect-gem-noc { + compatible = "qcom,sa8775p-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gpdsp_anoc: interconnect-gpdsp-anoc { + compatible = "qcom,sa8775p-gpdsp-anoc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect-lpass-ag-noc { + compatible = "qcom,sa8775p-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sa8775p-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect-mmss-noc { + compatible = "qcom,sa8775p-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspa_noc: interconnect-nspa-noc { + compatible = "qcom,sa8775p-nspa-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspb_noc: interconnect-nspb-noc { + compatible = "qcom,sa8775p-nspb-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_anoc: interconnect-pcie-anoc { + compatible = "qcom,sa8775p-pcie-anoc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect-system-noc { + compatible = "qcom,sa8775p-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + /* Will be updated by the bootloader. */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x0>; + }; + + qup_opp_table_100mhz: opp-table-qup100mhz { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + sail_ss_mem: sail-ss@80000000 { + reg = <0x0 0x80000000 0x0 0x10000000>; + no-map; + }; + + hyp_mem: hyp@90000000 { + reg = <0x0 0x90000000 0x0 0x600000>; + no-map; + }; + + xbl_boot_mem: xbl-boot@90600000 { + reg = <0x0 0x90600000 0x0 0x200000>; + no-map; + }; + + aop_image_mem: aop-image@90800000 { + reg = <0x0 0x90800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@90860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x90860000 0x0 0x20000>; + no-map; + }; + + uefi_log: uefi-log@908b0000 { + reg = <0x0 0x908b0000 0x0 0x10000>; + no-map; + }; + + reserved_mem: reserved@908f0000 { + reg = <0x0 0x908f0000 0x0 0xf000>; + no-map; + }; + + secdata_apss_mem: secdata-apss@908ff000 { + reg = <0x0 0x908ff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem@90900000 { + compatible = "qcom,smem"; + reg = <0x0 0x90900000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + cpucp_fw_mem: cpucp-fw@90b00000 { + reg = <0x0 0x90b00000 0x0 0x100000>; + no-map; + }; + + lpass_machine_learning_mem: lpass-machine-learning@93b00000 { + reg = <0x0 0x93b00000 0x0 0xf00000>; + no-map; + }; + + adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@94a00000 { + reg = <0x0 0x94a00000 0x0 0x800000>; + no-map; + }; + + pil_camera_mem: pil-camera@95200000 { + reg = <0x0 0x95200000 0x0 0x500000>; + no-map; + }; + + pil_adsp_mem: pil-adsp@95c00000 { + reg = <0x0 0x95c00000 0x0 0x1e00000>; + no-map; + }; + + pil_gdsp0_mem: pil-gdsp0@97b00000 { + reg = <0x0 0x97b00000 0x0 0x1e00000>; + no-map; + }; + + pil_gdsp1_mem: pil-gdsp1@99900000 { + reg = <0x0 0x99900000 0x0 0x1e00000>; + no-map; + }; + + pil_cdsp0_mem: pil-cdsp0@9b800000 { + reg = <0x0 0x9b800000 0x0 0x1e00000>; + no-map; + }; + + pil_gpu_mem: pil-gpu@9d600000 { + reg = <0x0 0x9d600000 0x0 0x2000>; + no-map; + }; + + pil_cdsp1_mem: pil-cdsp1@9d700000 { + reg = <0x0 0x9d700000 0x0 0x1e00000>; + no-map; + }; + + pil_cvp_mem: pil-cvp@9f500000 { + reg = <0x0 0x9f500000 0x0 0x700000>; + no-map; + }; + + pil_video_mem: pil-video@9fc00000 { + reg = <0x0 0x9fc00000 0x0 0x700000>; + no-map; + }; + + hyptz_reserved_mem: hyptz-reserved@beb00000 { + reg = <0x0 0xbeb00000 0x0 0x11500000>; + no-map; + }; + + tz_stat_mem: tz-stat@d0000000 { + reg = <0x0 0xd0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@d0100000 { + reg = <0x0 0xd0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@d1300000 { + reg = <0x0 0xd1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@d1800000 { + reg = <0x0 0xd1800000 0x0 0x3900000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,sa8775p-gcc"; + reg = <0x0 0x00100000 0x0 0xc7018>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SA8775P_CX>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sa8775p-ipcc", "qcom,ipcc"; + reg = <0x0 0x00408000 0x0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x5a3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + spi16: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart17: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x0088c000 0x0 0x4000>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c18: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00890000 0x0 0x4000>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x443 0x0>; + status = "disabled"; + + uart10: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interconnect-names = "qup-core", "qup-config"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 + &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 + &config_noc SLAVE_QUP_1 0>; + power-domains = <&rpmhpd SA8775P_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + + uart12: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a94000 0x0 0x4000>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sa8775p-pdc", "qcom,pdc"; + reg = <0x0 0x0b220000 0x0 0x30000>, + <0x0 0x17c000f0 0x0 0x64>; + qcom,pdc-ranges = <0 480 40>, + <40 140 14>, + <54 263 1>, + <55 306 4>, + <59 312 3>, + <62 374 2>, + <64 434 2>, + <66 438 2>, + <70 520 1>, + <73 523 1>, + <118 568 6>, + <124 609 3>, + <159 638 1>, + <160 720 3>, + <169 728 30>, + <199 416 2>, + <201 449 1>, + <202 89 1>, + <203 451 1>, + <204 462 1>, + <205 264 1>, + <206 579 1>, + <207 653 1>, + <208 656 1>, + <209 659 1>, + <210 122 1>, + <211 699 1>, + <212 705 1>, + <213 450 1>, + <214 643 2>, + <216 646 5>, + <221 390 5>, + <226 700 2>, + <228 440 1>, + <229 663 1>, + <230 524 2>, + <232 612 3>, + <235 723 5>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x1100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x100000>, + <0x0 0x0e700000 0x0 0xa0000>, + <0x0 0x0c40a000 0x0 0x26000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + qcom,channel = <0>; + qcom,ee = <0>; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + + tlmm: pinctrl@f000000 { + compatible = "qcom,sa8775p-tlmm"; + reg = <0x0 0x0f000000 0x0 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 149>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + memtimer: timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + ranges = <0x0 0x0 0x0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@17c21000 { + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@17c23000 { + reg = <0x17c23000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@17c25000 { + reg = <0x17c25000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@17c27000 { + reg = <0x17c27000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@17c29000 { + reg = <0x17c29000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@17c2b000 { + reg = <0x17c2b000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@17c2d000 { + reg = <0x17c2d000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 0>; + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sa8775p-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board_clk>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sa8775p-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-0 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp-1 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp-4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp-5 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp-6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp-7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp-8 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp-9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sa8775p-cpufreq-epss", + "qcom,cpufreq-epss"; + reg = <0x0 0x18591000 0x0 0x1000>, + <0x0 0x18593000 0x0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + }; + + arch_timer: timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 9dee131b1e24..299ef5dc225a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -80,11 +80,17 @@ reg = <0x0 0x94400000 0x0 0x200000>; no-map; }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; + size = <0x0 0x4000>; + no-map; + }; }; }; &apps_rsc { - pm6150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm6150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -206,7 +212,7 @@ }; }; - pm6150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm6150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -304,16 +310,11 @@ pinctrl-names = "default"; pinctrl-0 = <&disp_pins>; - reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel0_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; @@ -348,7 +349,7 @@ &qspi { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; flash@0 { compatible = "jedec,spi-nor"; @@ -370,8 +371,31 @@ &remoteproc_mpss { status = "okay"; compatible = "qcom,sc7180-mss-pil"; + reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo"; + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>; - memory-region = <&mba_mem &mpss_mem>; + memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; +}; + +&scm { + /* TF-A firmware maps memory cached so mark dma-coherent to match. */ + dma-coherent; }; &sdhc_1 { @@ -406,7 +430,7 @@ pinctrl-names = "default", "sleep"; pinctrl-1 = <&qup_uart3_sleep>; - bluetooth: wcn3990-bt { + bluetooth: bluetooth { compatible = "qcom,wcn3990-bt"; vddio-supply = <&vreg_l10a_1p8>; vddxo-supply = <&vreg_l1c_1p8>; @@ -467,7 +491,7 @@ /* PINCTRL - additions to nodes defined in sc7180.dtsi */ -&pm6150l_gpio { +&pm6150l_gpios { disp_pins: disp-state { pinconf { pins = "gpio3"; @@ -481,287 +505,264 @@ }; &qspi_clk { - pinconf { - pins = "gpio63"; - bias-disable; - }; + bias-disable; }; &qspi_cs0 { - pinconf { - pins = "gpio68"; - bias-disable; - }; + bias-disable; }; -&qspi_data01 { - pinconf { - pins = "gpio64", "gpio65"; +&qspi_data0 { + bias-pull-up; +}; - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; - }; +&qspi_data1 { + bias-pull-up; }; &qup_i2c2_default { - pinconf { - pins = "gpio15", "gpio16"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c4_default { - pinconf { - pins = "gpio115", "gpio116"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c7_default { - pinconf { - pins = "gpio6", "gpio7"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c9_default { - pinconf { - pins = "gpio46", "gpio47"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; -&qup_uart3_default { - pinconf-cts { - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - pins = "gpio38"; - bias-pull-down; - }; +&qup_uart3_cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; +}; - pinconf-rts { - /* We'll drive RTS, so no pull */ - pins = "gpio39"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart3_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; - pinconf-tx { - /* We'll drive TX, so no pull */ - pins = "gpio40"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart3_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; - pinconf-rx { - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ - pins = "gpio41"; - bias-pull-up; - }; +&qup_uart3_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; }; -&qup_uart8_default { - pinconf-tx { - pins = "gpio44"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart8_tx { + drive-strength = <2>; + bias-disable; +}; - pinconf-rx { - pins = "gpio45"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart8_rx { + drive-strength = <2>; + bias-pull-up; }; -&qup_spi0_default { - pinconf { - pins = "gpio34", "gpio35", "gpio36", "gpio37"; - drive-strength = <2>; - bias-disable; - }; +&qup_spi0_spi { + drive-strength = <2>; + bias-disable; }; -&qup_spi6_default { - pinconf { - pins = "gpio59", "gpio60", "gpio61", "gpio62"; - drive-strength = <2>; - bias-disable; - }; +&qup_spi0_cs { + drive-strength = <2>; + bias-disable; }; -&qup_spi10_default { - pinconf { - pins = "gpio86", "gpio87", "gpio88", "gpio89"; - drive-strength = <2>; - bias-disable; - }; +&qup_spi6_spi { + drive-strength = <2>; + bias-disable; }; -&tlmm { - qup_uart3_sleep: qup-uart3-sleep { - pinmux { - pins = "gpio38", "gpio39", - "gpio40", "gpio41"; - function = "gpio"; - }; +&qup_spi6_cs { + drive-strength = <2>; + bias-disable; +}; - pinconf-cts { +&qup_spi10_spi { + drive-strength = <2>; + bias-disable; +}; + +&qup_spi10_cs { + drive-strength = <2>; + bias-disable; +}; + +&tlmm { + qup_uart3_sleep: qup-uart3-sleep-state { + cts-pins { /* * Configure a pull-down on CTS to match the pull of * the Bluetooth module. */ pins = "gpio38"; + function = "gpio"; bias-pull-down; }; - pinconf-rts { + rts-pins { /* * Configure pull-down on RTS. As RTS is active low * signal, pull it low to indicate the BT SoC that it * can wakeup the system anytime from suspend state by * pulling RX low (by sending wakeup bytes). */ - pins = "gpio39"; - bias-pull-down; + pins = "gpio39"; + function = "gpio"; + bias-pull-down; }; - pinconf-tx { + tx-pins { /* * Configure pull-up on TX when it isn't actively driven * to prevent BT SoC from receiving garbage during sleep. */ pins = "gpio40"; + function = "gpio"; bias-pull-up; }; - pinconf-rx { + rx-pins { /* * Configure a pull-up on RX. This is needed to avoid * garbage data when the TX pin of the Bluetooth module * is floating which may cause spurious wakeups. */ pins = "gpio41"; + function = "gpio"; bias-pull-up; }; }; - sdc1_on: sdc1-on { - pinconf-clk { + sdc1_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - pinconf-cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <10>; }; - pinconf-data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; - pinconf-rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc1_off: sdc1-off { - pinconf-clk { + sdc1_off: sdc1-off-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - pinconf-cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - pinconf-data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - pinconf-rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc2_on: sdc2-on { - pinconf-clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - pinconf-cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - pinconf-data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; - pinconf-sd-cd { + sd-cd-pins { pins = "gpio69"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; - sdc2_off: sdc2-off { - pinconf-clk { + sdc2_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - pinconf-cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - pinconf-data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; }; - pinconf-sd-cd { + sd-cd-pins { pins = "gpio69"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi index d8ed1d7b4ec7..4b306a59d9be 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi @@ -16,3 +16,11 @@ &cpu6_opp12 { opp-peak-kBps = <8532000 23347200>; }; + +&cpu6_opp13 { + opp-peak-kBps = <8532000 23347200>; +}; + +&cpu6_opp14 { + opp-peak-kBps = <8532000 23347200>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index 7ee407f7b6bb..8b8ea8af165d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -181,23 +181,15 @@ ap_ts_pen_1v8: &i2c4 { /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &en_pp3300_dx_edp { - pinmux { - pins = "gpio67"; - }; - - pinconf { - pins = "gpio67"; - }; + pins = "gpio67"; }; &ts_reset_l { - pinconf { - /* - * We want reset state by default and it will be up to the - * driver to disable this when it's ready. - */ - output-low; - }; + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; }; /* PINCTRL - board-specific pinctrl */ @@ -327,16 +319,10 @@ ap_ts_pen_1v8: &i2c4 { "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; - dmic_clk_en: dmic_clk_en { - pinmux { - pins = "gpio83"; - function = "gpio"; - }; - - pinconf { - pins = "gpio83"; - drive-strength = <8>; - bias-pull-up; - }; + dmic_clk_en: dmic-clk-en-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index 1bd6c7dcd9e9..b3ba23a88a0b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -10,22 +10,22 @@ / { /* BOARD-SPECIFIC TOP LEVEL NODES */ - max98360a_1: max98360a_1 { + max98360a_1: amplifier-1 { compatible = "maxim,max98360a"; #sound-dai-cells = <0>; }; - max98360a_2: max98360a_2 { + max98360a_2: amplifier-2 { compatible = "maxim,max98360a"; #sound-dai-cells = <0>; }; - max98360a_3: max98360a_3 { + max98360a_3: amplifier-3 { compatible = "maxim,max98360a"; #sound-dai-cells = <0>; }; - pp3300_touch: pp3300-touch { + pp3300_touch: pp3300-touch-regulator { compatible = "regulator-fixed"; regulator-name = "pp3300_touch"; @@ -85,6 +85,24 @@ }; }; +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_dx_edp { + /* + * The atna33xc20 really likes to be power cycled to keep it from + * getting in a bad state. This is the reason that the touchscreen + * rail and eDP rails are separate from each other on homestar (but + * not other trogdor devices) Make sure it starts "off" at bootup. + */ + /delete-property/ regulator-boot-on; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; @@ -180,30 +198,19 @@ ap_ts_pen_1v8: &i2c4 { /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &en_pp3300_dx_edp { - pinmux { - pins = "gpio67"; - }; - - pinconf { - pins = "gpio67"; - }; + pins = "gpio67"; }; -&sec_mi2s_active{ - pinmux { - pins = "gpio49", "gpio50", "gpio51", "gpio52"; - function = "mi2s_1"; - }; +&sec_mi2s_active { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; }; &ts_reset_l { - pinconf { - /* - * We want reset state by default and it will be up to the - * driver to disable this when it's ready. - */ - output-low; - }; + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; }; /* PINCTRL - board-specific pinctrl */ @@ -333,16 +340,10 @@ ap_ts_pen_1v8: &i2c4 { "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; - en_pp3300_touch: en-pp3300-touch { - pinmux { - pins = "gpio87"; - function = "gpio"; - }; - - pinconf { - pins = "gpio87"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_touch: en-pp3300-touch-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts deleted file mode 100644 index 1a62e8d435ab..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Kingoftown board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-ti-sn65dsi86.dtsi" -#include "sc7180-trogdor-kingoftown.dtsi" - -/ { - model = "Google Kingoftown (rev0)"; - compatible = "google,kingoftown-rev0", "qcom,sc7180"; -}; - -/* - * In rev1+, the enable pin of pp3300_fp_tp will be tied to pp1800_l10a - * power rail instead, since kingoftown does not have FP. - */ -&pp3300_fp_tp { - gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&en_fp_rails>; -}; - -&tlmm { - en_fp_rails: en-fp-rails { - pinmux { - pins = "gpio74"; - function = "gpio"; - }; - - pinconf { - pins = "gpio74"; - drive-strength = <2>; - bias-disable; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts deleted file mode 100644 index e0752ba7df11..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts +++ /dev/null @@ -1,17 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Kingoftown board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-parade-ps8640.dtsi" -#include "sc7180-trogdor-kingoftown.dtsi" - -/ { - model = "Google Kingoftown (rev1+)"; - compatible = "google,kingoftown", "qcom,sc7180"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts index 74f0e07ea5cf..36326ef972dc 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts @@ -5,12 +5,21 @@ * Copyright 2021 Google LLC. */ -/* This file must be included after sc7180-trogdor.dtsi */ +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" #include <arm/cros-ec-keyboard.dtsi> #include "sc7180-trogdor-lte-sku.dtsi" +/ { + model = "Google Kingoftown"; + compatible = "google,kingoftown", "qcom,sc7180"; +}; + &alc5682 { compatible = "realtek,rt5682s"; + /delete-property/ VBAT-supply; realtek,dmic1-clk-pin = <2>; realtek,dmic-clk-rate-hz = <2048000>; }; @@ -87,13 +96,7 @@ ap_ts_pen_1v8: &i2c4 { /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &en_pp3300_dx_edp { - pinmux { - pins = "gpio67"; - }; - - pinconf { - pins = "gpio67"; - }; + pins = "gpio67"; }; /* PINCTRL - board-specific pinctrl */ diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts index 850776c5323d..70d5a7aa8873 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts @@ -26,7 +26,7 @@ interrupt-parent = <&tlmm>; interrupts = <58 IRQ_TYPE_EDGE_FALLING>; - vcc-supply = <&pp3300_fp_tp>; + vdd-supply = <&pp3300_fp_tp>; hid-descr-addr = <0x20>; wakeup-source; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts index 235cda2bba5e..7f01573b5543 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts @@ -23,7 +23,7 @@ /delete-node/&ap_ts; &panel { - compatible = "innolux,n116bca-ea1", "innolux,n116bge"; + compatible = "innolux,n116bca-ea1"; }; &sdhc_2 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts deleted file mode 100644 index d49de65aa960..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ /dev/null @@ -1,34 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Lazor board device tree source - * - * Copyright 2020 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-ti-sn65dsi86.dtsi" -#include "sc7180-trogdor-lazor.dtsi" - -/ { - model = "Google Lazor (rev0)"; - compatible = "google,lazor-rev0", "qcom,sc7180"; -}; - -&sn65dsi86_out { - /* - * Lane 0 was incorrectly mapped on the cable, but we've now decided - * that the cable is canon and in -rev1+ we'll make a board change - * that means we no longer need the swizzle. - */ - lane-polarities = <1 0>; -}; - -&usb_hub_2_x { - vdd-supply = <&pp3300_l7c>; -}; - -&usb_hub_3_x { - vdd-supply = <&pp3300_l7c>; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 002663d752da..269007d73162 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -75,21 +75,13 @@ ap_ts_pen_1v8: &i2c4 { /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &trackpad_int_1v8_odl { - pinmux { - pins = "gpio58"; - }; - - pinconf { - pins = "gpio58"; - }; + pins = "gpio58"; }; &ts_reset_l { - pinconf { - /* This pin is not connected on -rev0, pull up to park. */ - /delete-property/bias-disable; - bias-pull-up; - }; + /* This pin is not connected on -rev0, pull up to park. */ + /delete-property/bias-disable; + bias-pull-up; }; /* PINCTRL - board-specific pinctrl */ diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi index fd4b71203754..bffcbd141bd7 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi @@ -19,12 +19,11 @@ }; &ipa { - status = "okay"; - /* * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the * modem needs to cover certain init steps (GSI init), and * the AP needs to wait for it. */ - modem-init; + qcom,gsi-loader = "modem"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts deleted file mode 100644 index 2767817fb053..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x0 => 0 - * - bits 7..4: Panel ID: 0x0 (AUO) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland-rev0.dtsi" - -/ { - model = "Google Mrbland rev0 AUO panel board"; - compatible = "google,mrbland-rev0-sku0", "qcom,sc7180"; -}; - -&panel { - compatible = "auo,b101uan08.3"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts deleted file mode 100644 index 711485574a03..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x10 => 16 - * - bits 7..4: Panel ID: 0x1 (BOE) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland-rev0.dtsi" - -/ { - model = "Google Mrbland rev0 BOE panel board"; - compatible = "google,mrbland-rev0-sku16", "qcom,sc7180"; -}; - -&panel { - compatible = "boe,tv101wum-n53"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi deleted file mode 100644 index 7bc8402c018e..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi +++ /dev/null @@ -1,53 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland.dtsi" - -&avdd_lcd { - gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; -}; - -&panel { - enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; -}; - -&v1p8_mipi { - gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; -}; - -/* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */ -&avdd_lcd_en { - pinmux { - pins = "gpio80"; - }; - - pinconf { - pins = "gpio80"; - }; -}; - -&mipi_1800_en { - pinmux { - pins = "gpio81"; - }; - - pinconf { - pins = "gpio81"; - }; -}; -&vdd_reset_1800 { - pinmux { - pins = "gpio76"; - }; - - pinconf { - pins = "gpio76"; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts deleted file mode 100644 index 275313ef7554..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x600 => 1536 - * - bits 11..8: Panel ID: 0x6 (AUO) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland.dtsi" - -/ { - model = "Google Mrbland rev1+ AUO panel board"; - compatible = "google,mrbland-sku1536", "qcom,sc7180"; -}; - -&panel { - compatible = "auo,b101uan08.3"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts deleted file mode 100644 index 87c6b6c30b5e..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts +++ /dev/null @@ -1,24 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x300 => 768 - * - bits 11..8: Panel ID: 0x3 (BOE) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland.dtsi" - -/ { - model = "Google Mrbland (rev1 - 2) BOE panel board"; - /* Uses ID 768 on rev1 and 1024 on rev2+ */ - compatible = "google,mrbland-sku1024", "google,mrbland-sku768", - "qcom,sc7180"; -}; - -&panel { - compatible = "boe,tv101wum-n53"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi deleted file mode 100644 index 97cba7f8064f..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi +++ /dev/null @@ -1,350 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" - -/* This board only has 1 USB Type-C port. */ -/delete-node/ &usb_c1; - -/ { - avdd_lcd: avdd-lcd { - compatible = "regulator-fixed"; - regulator-name = "avdd_lcd"; - - gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_lcd_en>; - - vin-supply = <&pp5000_a>; - }; - - avee_lcd: avee-lcd { - compatible = "regulator-fixed"; - regulator-name = "avee_lcd"; - - gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&avee_lcd_en>; - - vin-supply = <&pp5000_a>; - }; - - v1p8_mipi: v1p8-mipi { - compatible = "regulator-fixed"; - regulator-name = "v1p8_mipi"; - - gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&mipi_1800_en>; - - vin-supply = <&pp3300_a>; - }; -}; - -&backlight { - pwms = <&cros_ec_pwm 0>; -}; - -&camcc { - status = "okay"; -}; - -&cros_ec { - keyboard-controller { - compatible = "google,cros-ec-keyb-switches"; - }; -}; - -&dsi0 { - - panel: panel@0 { - /* Compatible will be filled in per-board */ - reg = <0>; - enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vdd_reset_1800>; - avdd-supply = <&avdd_lcd>; - avee-supply = <&avee_lcd>; - pp1800-supply = <&v1p8_mipi>; - pp3300-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - rotation = <270>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - }; - - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&gpio_keys { - status = "okay"; -}; - -&i2c4 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@5d { - compatible = "goodix,gt7375p"; - reg = <0x5d>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - - reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; - - vdd-supply = <&pp3300_ts>; - }; -}; - -&pp1800_uf_cam { - status = "okay"; -}; - -&pp1800_wf_cam { - status = "okay"; -}; - -&pp2800_uf_cam { - status = "okay"; -}; - -&pp2800_wf_cam { - status = "okay"; -}; - -&wifi { - qcom,ath10k-calibration-variant = "GO_MRBLAND"; -}; - -/* - * No eDP on this board but it's logically the same signal so just give it - * a new name and assign the proper GPIO. - */ -pp3300_disp_on: &pp3300_dx_edp { - gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>; -}; - -/* PINCTRL - modifications to sc7180-trogdor.dtsi */ - -/* - * No eDP on this board but it's logically the same signal so just give it - * a new name and assign the proper GPIO. - */ - -tp_en: &en_pp3300_dx_edp { - pinmux { - pins = "gpio85"; - }; - - pinconf { - pins = "gpio85"; - }; -}; - -/* PINCTRL - board-specific pinctrl */ - -&tlmm { - gpio-line-names = "HUB_RST_L", - "AP_RAM_ID0", - "AP_SKU_ID2", - "AP_RAM_ID1", - "", - "AP_RAM_ID2", - "UF_CAM_EN", - "WF_CAM_EN", - "TS_RESET_L", - "TS_INT_L", - "", - "", - "AP_EDP_BKLTEN", - "UF_CAM_MCLK", - "WF_CAM_CLK", - "", - "", - "UF_CAM_SDA", - "UF_CAM_SCL", - "WF_CAM_SDA", - "WF_CAM_SCL", - "AVEE_LCD_EN", - "", - "AMP_EN", - "", - "", - "", - "", - "HP_IRQ", - "WF_CAM_RST_L", - "UF_CAM_RST_L", - "AP_BRD_ID2", - "", - "AP_BRD_ID0", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - "AP_H1_SPI_CLK", - "AP_H1_SPI_CS_L", - "BT_UART_CTS", - "BT_UART_RTS", - "BT_UART_TXD", - "BT_UART_RXD", - "H1_AP_INT_ODL", - "", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "HP_I2C_SDA", - "HP_I2C_SCL", - "FORCED_USB_BOOT", - "AMP_BCLK", - "AMP_LRCLK", - "AMP_DIN", - "PEN_DET_ODL", - "HP_BCLK", - "HP_LRCLK", - "HP_DOUT", - "HP_DIN", - "HP_MCLK", - "AP_SKU_ID0", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "AP_SPI_CLK", - "AP_SPI_MOSI", - "AP_SPI_MISO", - /* - * AP_FLASH_WP_L is crossystem ABI. Schematics - * call it BIOS_FLASH_WP_L. - */ - "AP_FLASH_WP_L", - "", - "AP_SPI_CS0_L", - "", - "", - "", - "", - "WLAN_SW_CTRL", - "", - "REPORT_E", - "", - "ID0", - "", - "ID1", - "", - "", - "", - "CODEC_PWR_EN", - "HUB_EN", - "TP_EN", - "MIPI_1.8V_EN", - "VDD_RESET_1.8V", - "AVDD_LCD_EN", - "", - "AP_SKU_ID1", - "AP_RST_REQ", - "", - "AP_BRD_ID1", - "AP_EC_INT_L", - "SDM_GRFC_3", - "", - "", - "BOOT_CONFIG_4", - "BOOT_CONFIG_2", - "", - "", - "", - "", - "", - "", - "", - "BOOT_CONFIG_3", - "WCI2_LTE_COEX_TXD", - "WCI2_LTE_COEX_RXD", - "", - "", - "", - "", - "FORCED_USB_BOOT_POL", - "AP_TS_PEN_I2C_SDA", - "AP_TS_PEN_I2C_SCL", - "DP_HOT_PLUG_DET", - "EC_IN_RW_ODL"; - - avdd_lcd_en: avdd-lcd-en { - pinmux { - pins = "gpio88"; - function = "gpio"; - }; - - pinconf { - pins = "gpio88"; - drive-strength = <2>; - bias-disable; - }; - }; - - avee_lcd_en: avee-lcd-en { - pinmux { - pins = "gpio21"; - function = "gpio"; - }; - - pinconf { - pins = "gpio21"; - drive-strength = <2>; - bias-disable; - }; - }; - - mipi_1800_en: mipi-1800-en { - pinmux { - pins = "gpio86"; - function = "gpio"; - }; - - pinconf { - pins = "gpio86"; - drive-strength = <2>; - bias-disable; - }; - }; - - vdd_reset_1800: vdd-reset-1800 { - pinmux { - pins = "gpio87"; - function = "gpio"; - }; - - pinconf { - pins = "gpio87"; - drive-strength = <2>; - bias-disable; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi index 6a84fba178d6..5aa7949b5328 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -8,7 +8,7 @@ #include <dt-bindings/gpio/gpio.h> / { - pp3300_brij_ps8640: pp3300-brij-ps8640 { + pp3300_brij_ps8640: pp3300-brij-ps8640-regulator { compatible = "regulator-fixed"; status = "okay"; regulator-name = "pp3300_brij_ps8640"; @@ -26,6 +26,26 @@ }; }; +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_dx_edp { + off-on-delay-us = <500000>; + + /* + * It's nicer to start with this regulator enabled. The + * bootloader may have left it on and it's nice not to cause an + * extra power cycle of the touchscreen and eDP panel at bootup. + * This should help speed bootup because we have off-on-delay-us. + */ + regulator-boot-on; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + &dsi0_out { remote-endpoint = <&ps8640_in>; }; @@ -83,29 +103,17 @@ edp_brij_i2c: &i2c2 { }; &tlmm { - edp_brij_ps8640_rst: edp-brij-ps8640-rst { - pinmux { - pins = "gpio11"; - function = "gpio"; - }; - - pinconf { - pins = "gpio11"; - drive-strength = <2>; - bias-disable; - }; + edp_brij_ps8640_rst: edp-brij-ps8640-rst-state { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640 { - pinmux { - pins = "gpio32"; - function = "gpio"; - }; - - pinconf { - pins = "gpio32"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi index 56d787785fd5..8823edbb4d6e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi @@ -39,7 +39,7 @@ interrupt-parent = <&tlmm>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - vcc-supply = <&pp3300_fp_tp>; + vdd-supply = <&pp3300_fp_tp>; post-power-on-delay-ms = <100>; hid-descr-addr = <0x0001>; @@ -84,13 +84,7 @@ }; &en_pp3300_dx_edp { - pinmux { - pins = "gpio67"; - }; - - pinconf { - pins = "gpio67"; - }; + pins = "gpio67"; }; /* PINCTRL - board-specific pinctrl */ diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts new file mode 100644 index 000000000000..021bcafcf815 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-pazquel360.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pazquel (Parade,LTE)"; + compatible = "google,pazquel-sku22", "google,pazquel-sku20", "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts new file mode 100644 index 000000000000..defd84c5354a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-pazquel360.dtsi" + +/ { + model = "Google Pazquel (Parade,WIFI-only)"; + compatible = "google,pazquel-sku21", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi new file mode 100644 index 000000000000..273e2249f018 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi */ +#include "sc7180-trogdor-pazquel.dtsi" + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; + /delete-property/ VBAT-supply; +}; + +ap_ts_pen_1v8: &i2c4 { + clock-frequency = <400000>; + status = "okay"; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth3915", "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + vccio-supply = <&pp1800_l10a>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + MATRIX_KEY(0x03, 0x09, 0) /* T11 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + MATRIX_KEY(0x03, 0x09, KEY_SLEEP) + CROS_STD_MAIN_KEYMAP + >; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_PAZQUEL360"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index a7582fb547ee..6c5287bd27d6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -312,15 +312,9 @@ ap_ts_pen_1v8: &i2c4 { "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; - dmic_sel: dmic-sel { - pinmux { - pins = "gpio86"; - function = "gpio"; - }; - - pinconf { - pins = "gpio86"; - bias-pull-down; - }; + dmic_sel: dmic-sel-state { + pins = "gpio86"; + function = "gpio"; + bias-pull-down; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index 695b04fe7221..8e7b42f843d4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -13,7 +13,7 @@ /delete-node/ &usb_c1; / { - ppvar_lcd: ppvar-lcd { + ppvar_lcd: ppvar-lcd-regulator { compatible = "regulator-fixed"; regulator-name = "ppvar_lcd"; @@ -25,7 +25,7 @@ vin-supply = <&pp5000_a>; }; - v1p8_disp: v1p8-disp { + v1p8_disp: v1p8-disp-regulator { compatible = "regulator-fixed"; regulator-name = "v1p8_disp"; @@ -65,14 +65,9 @@ backlight = <&backlight>; rotation = <270>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; @@ -147,13 +142,7 @@ pp3300_disp_on: &pp3300_dx_edp { */ tp_en: &en_pp3300_dx_edp { - pinmux { - pins = "gpio67"; - }; - - pinconf { - pins = "gpio67"; - }; + pins = "gpio67"; }; /* PINCTRL - board-specific pinctrl */ @@ -283,42 +272,24 @@ tp_en: &en_pp3300_dx_edp { "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; - lcd_rst: lcd-rst { - pinmux { - pins = "gpio87"; - function = "gpio"; - }; - - pinconf { - pins = "gpio87"; - drive-strength = <2>; - bias-disable; - }; + lcd_rst: lcd-rst-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - ppvar_lcd_en: ppvar-lcd-en { - pinmux { - pins = "gpio88"; - function = "gpio"; - }; - - pinconf { - pins = "gpio88"; - drive-strength = <2>; - bias-disable; - }; + ppvar_lcd_en: ppvar-lcd-en-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - pp1800_disp_on: pp1800-disp-on { - pinmux { - pins = "gpio86"; - function = "gpio"; - }; - - pinconf { - pins = "gpio86"; - drive-strength = <2>; - bias-disable; - }; + pp1800_disp_on: pp1800-disp-on-state { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index bc097d1b1b23..671b3691f1bb 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -63,13 +63,7 @@ ap_ts_pen_1v8: &i2c4 { /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &trackpad_int_1v8_odl { - pinmux { - pins = "gpio58"; - }; - - pinconf { - pins = "gpio58"; - }; + pins = "gpio58"; }; /* PINCTRL - board-specific pinctrl */ diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi index f869e6a343c1..e52b8776755d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -7,6 +7,26 @@ #include <dt-bindings/gpio/gpio.h> +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_dx_edp { + off-on-delay-us = <500000>; + + /* + * It's nicer to start with this regulator enabled. The + * bootloader may have left it on and it's nice not to cause an + * extra power cycle of the touchscreen and eDP panel at bootup. + * This should help speed bootup because we have off-on-delay-us. + */ + regulator-boot-on; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + &dsi0_out { remote-endpoint = <&sn65dsi86_in>; }; @@ -76,16 +96,10 @@ edp_brij_i2c: &i2c2 { }; &tlmm { - edp_brij_irq: edp-brij-irq { - pinmux { - pins = "gpio11"; - function = "gpio"; - }; - - pinconf { - pins = "gpio11"; - drive-strength = <2>; - bias-pull-down; - }; + edp_brij_irq: edp-brij-irq-state { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts deleted file mode 100644 index d6ed7d0afe4a..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Wormdingler board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x10 => 16 - * - bits 7..4: Panel ID: 0x1 (BOE) - */ - -/dts-v1/; - -#include "sc7180-trogdor-wormdingler-rev0.dtsi" - -/ { - model = "Google Wormdingler rev0 BOE panel board"; - compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180"; -}; - -&panel { - compatible = "boe,tv110c9m-ll3"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts deleted file mode 100644 index c03525ea64ca..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Wormdingler board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x0 => 0 - * - bits 7..4: Panel ID: 0x0 (INX) - */ - -/dts-v1/; - -#include "sc7180-trogdor-wormdingler-rev0.dtsi" - -/ { - model = "Google Wormdingler rev0 INX panel board"; - compatible = "google,wormdingler-rev0-sku0", "qcom,sc7180"; -}; - -&panel { - compatible = "innolux,hj110iz-01a"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi deleted file mode 100644 index db29e0cba29d..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi +++ /dev/null @@ -1,53 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Wormdingler board device tree source - * - * Copyright 2021 Google LLC. - * - */ - -/dts-v1/; - -#include "sc7180-trogdor-wormdingler.dtsi" - -&avdd_lcd { - gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; -}; - -&panel { - enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; -}; - -&v1p8_mipi { - gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; -}; - -/* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */ -&avdd_lcd_en { - pinmux { - pins = "gpio80"; - }; - - pinconf { - pins = "gpio80"; - }; -}; - -&mipi_1800_en { - pinmux { - pins = "gpio81"; - }; - - pinconf { - pins = "gpio81"; - }; -}; -&vdd_reset_1800 { - pinmux { - pins = "gpio76"; - }; - - pinconf { - pins = "gpio76"; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts index aa605885c371..6225ab8329c3 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts @@ -19,6 +19,7 @@ &alc5682 { compatible = "realtek,rt5682s"; + /delete-property/ VBAT-supply; realtek,dmic1-clk-pin = <2>; realtek,dmic-clk-rate-hz = <2048000>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts index 7116c44c8d85..b40b068dad6a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts @@ -19,6 +19,7 @@ &alc5682 { compatible = "realtek,rt5682s"; + /delete-property/ VBAT-supply; realtek,dmic1-clk-pin = <2>; realtek,dmic-clk-rate-hz = <2048000>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 6312108e8b3e..262d6691abd9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -10,7 +10,7 @@ #include "sc7180-trogdor.dtsi" / { - avdd_lcd: avdd-lcd { + avdd_lcd: avdd-lcd-regulator { compatible = "regulator-fixed"; regulator-name = "avdd_lcd"; @@ -22,7 +22,7 @@ vin-supply = <&pp5000_a>; }; - avee_lcd: avee-lcd { + avee_lcd: avee-lcd-regulator { compatible = "regulator-fixed"; regulator-name = "avee_lcd"; @@ -35,7 +35,7 @@ }; pp1800_ts: - v1p8_mipi: v1p8-mipi { + v1p8_mipi: v1p8-mipi-regulator { compatible = "regulator-fixed"; regulator-name = "v1p8_mipi"; @@ -124,14 +124,9 @@ backlight = <&backlight>; rotation = <270>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; @@ -222,13 +217,7 @@ pp3300_disp_on: &pp3300_dx_edp { */ tp_en: &en_pp3300_dx_edp { - pinmux { - pins = "gpio85"; - }; - - pinconf { - pins = "gpio85"; - }; + pins = "gpio85"; }; /* PINCTRL - board-specific pinctrl */ @@ -358,55 +347,31 @@ tp_en: &en_pp3300_dx_edp { "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; - avdd_lcd_en: avdd-lcd-en { - pinmux { - pins = "gpio88"; - function = "gpio"; - }; - - pinconf { - pins = "gpio88"; - drive-strength = <2>; - bias-disable; - }; + avdd_lcd_en: avdd-lcd-en-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - avee_lcd_en: avee-lcd-en { - pinmux { - pins = "gpio21"; - function = "gpio"; - }; - - pinconf { - pins = "gpio21"; - drive-strength = <2>; - bias-disable; - }; + avee_lcd_en: avee-lcd-en-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - mipi_1800_en: mipi-1800-en { - pinmux { - pins = "gpio86"; - function = "gpio"; - }; - - pinconf { - pins = "gpio86"; - drive-strength = <2>; - bias-disable; - }; + mipi_1800_en: mipi-1800-en-state { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - vdd_reset_1800: vdd-reset-1800 { - pinmux { - pins = "gpio87"; - function = "gpio"; - }; - - pinconf { - pins = "gpio87"; - drive-strength = <2>; - bias-disable; - }; + vdd_reset_1800: vdd-reset-1800-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index eae22e6e97c1..1472e7f10831 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -81,6 +81,12 @@ reg = <0x0 0x94400000 0x0 0x200000>; no-map; }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; + size = <0x0 0x4000>; + no-map; + }; }; aliases { @@ -354,7 +360,7 @@ pwmleds { compatible = "pwm-leds"; - keyboard_backlight: keyboard-backlight { + keyboard_backlight: led-0 { status = "disabled"; label = "cros_ec::kbd_backlight"; function = LED_FUNCTION_KBD_BACKLIGHT; @@ -418,8 +424,9 @@ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; + pinctrl-1 = <&qspi_sleep>; flash@0 { compatible = "jedec,spi-nor"; @@ -432,7 +439,7 @@ }; &apps_rsc { - pm6150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm6150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -506,6 +513,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + regulator-boot-on; }; pp1800_prox: @@ -545,7 +554,7 @@ }; }; - pm6150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm6150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -768,6 +777,8 @@ hp_i2c: &i2c9 { interrupts = <28 IRQ_TYPE_EDGE_BOTH>; AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; MICVDD-supply = <&pp3300_codec>; VBAT-supply = <&pp3300_audio>; @@ -786,18 +797,18 @@ hp_i2c: &i2c9 { #address-cells = <1>; #size-cells = <0>; - mi2s@0 { + dai-link@0 { reg = <MI2S_PRIMARY>; qcom,playback-sd-lines = <1>; qcom,capture-sd-lines = <0>; }; - secondary_mi2s: mi2s@1 { + secondary_mi2s: dai-link@1 { reg = <MI2S_SECONDARY>; qcom,playback-sd-lines = <0>; }; - hdmi@5 { + dai-link@5 { reg = <LPASS_DP_RX>; }; }; @@ -814,7 +825,11 @@ hp_i2c: &i2c9 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dp_hot_plug_det>; +}; + +&mdss_dp_out { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; }; &pm6150_adc { @@ -851,12 +866,35 @@ hp_i2c: &i2c9 { &remoteproc_mpss { status = "okay"; compatible = "qcom,sc7180-mss-pil"; + reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo"; + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>; - memory-region = <&mba_mem &mpss_mem>; + memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>; /* This gets overridden for SKUs with LTE support. */ firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn", "qcom/sc7180-trogdor/modem-nolte/qdsp6sw.mbn"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; +}; + +&scm { + /* TF-A firmware maps memory cached so mark dma-coherent to match. */ + dma-coherent; }; &sdhc_1 { @@ -880,27 +918,30 @@ hp_i2c: &i2c9 { }; &spi0 { - pinctrl-0 = <&qup_spi0_cs_gpio_init_high>, <&qup_spi0_cs_gpio>; + pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs_gpio>; cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; }; &spi6 { - pinctrl-0 = <&qup_spi6_cs_gpio_init_high>, <&qup_spi6_cs_gpio>; + pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs_gpio>; cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; }; ap_spi_fp: &spi10 { - pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>; + pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs_gpio>; cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; cros_ec_fp: ec@0 { - compatible = "google,cros-ec-spi"; + compatible = "google,cros-ec-fp", "google,cros-ec-spi"; reg = <0>; interrupt-parent = <&tlmm>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&fp_to_ap_irq_l>; + pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>; + boot0-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; spi-max-frequency = <3000000>; + vdd-supply = <&pp3300_fp_tp>; }; }; @@ -997,184 +1038,153 @@ ap_spi_fp: &spi10 { /* PINCTRL - additions to nodes defined in sc7180.dtsi */ &dp_hot_plug_det { - pinconf { - pins = "gpio117"; - bias-disable; - }; + bias-disable; }; &pri_mi2s_active { - pinconf { - pins = "gpio53", "gpio54", "gpio55", "gpio56"; - drive-strength = <2>; - bias-pull-down; - }; + drive-strength = <2>; + bias-pull-down; }; &pri_mi2s_mclk_active { - pinconf { - pins = "gpio57"; - drive-strength = <2>; - bias-pull-down; - }; + drive-strength = <2>; + bias-pull-down; }; &qspi_cs0 { - pinconf { - pins = "gpio68"; - bias-disable; - }; + bias-disable; /* External pullup */ }; &qspi_clk { - pinconf { - pins = "gpio63"; - drive-strength = <8>; - bias-disable; - }; + drive-strength = <8>; + bias-disable; /* Rely on Cr50 internal pulldown */ }; -&qspi_data01 { - pinconf { - pins = "gpio64", "gpio65"; +&qspi_data0 { + bias-disable; /* Rely on Cr50 internal pulldown */ +}; - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; - }; +&qspi_data1 { + bias-pull-down; }; &qup_i2c2_default { - pinconf { - pins = "gpio15", "gpio16"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c4_default { - pinconf { - pins = "gpio115", "gpio116"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c5_default { - pinconf { - pins = "gpio25", "gpio26"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c7_default { - pinconf { - pins = "gpio6", "gpio7"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c9_default { - pinconf { - pins = "gpio46", "gpio47"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; +}; + +&qup_spi0_spi { + drive-strength = <2>; + bias-disable; }; &qup_spi0_cs_gpio { - pinconf { - pins = "gpio34", "gpio35", "gpio36", "gpio37"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; +}; + +&qup_spi6_spi { + drive-strength = <2>; + bias-disable; }; &qup_spi6_cs_gpio { - pinconf { - pins = "gpio59", "gpio60", "gpio61", "gpio62"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; +}; + +&qup_spi10_spi { + drive-strength = <2>; + bias-disable; }; &qup_spi10_cs_gpio { - pinconf { - pins = "gpio86", "gpio87", "gpio88", "gpio89"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; -&qup_uart3_default { - pinconf-cts { - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - pins = "gpio38"; - bias-pull-down; - }; +&qup_uart3_cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; +}; - pinconf-rts-tx { - /* We'll drive RTS and TX, so no pull */ - pins = "gpio39", "gpio40"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart3_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; - pinconf-rx { - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ - pins = "gpio41"; - bias-pull-up; - }; +&qup_uart3_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; }; -&qup_uart8_default { - pinconf-tx { - pins = "gpio44"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart3_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; - pinconf-rx { - pins = "gpio45"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart8_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart8_rx { + drive-strength = <2>; + bias-pull-up; }; &sec_mi2s_active { - pinconf { - pins = "gpio49", "gpio50", "gpio51"; - drive-strength = <2>; - bias-pull-down; - }; + drive-strength = <2>; + bias-pull-down; }; /* PINCTRL - board-specific pinctrl */ -&pm6150_gpio { +&pm6150_gpios { status = "disabled"; /* No GPIOs are connected */ }; -&pm6150l_gpio { +&pm6150l_gpios { gpio-line-names = "AP_SUSPEND", "", "", @@ -1196,468 +1206,356 @@ ap_spi_fp: &spi10 { pinctrl-names = "default"; pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>; - amp_en: amp-en { - pinmux { - pins = "gpio23"; - function = "gpio"; - }; - - pinconf { - pins = "gpio23"; - bias-pull-down; - }; + amp_en: amp-en-state { + pins = "gpio23"; + function = "gpio"; + bias-pull-down; }; - ap_ec_int_l: ap-ec-int-l { - pinmux { - pins = "gpio94"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio94"; - bias-pull-up; - }; + ap_ec_int_l: ap-ec-int-l-state { + pins = "gpio94"; + function = "gpio"; + bias-pull-up; }; - ap_edp_bklten: ap-edp-bklten { - pinmux { - pins = "gpio12"; - function = "gpio"; - }; - - pinconf { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; + ap_edp_bklten: ap-edp-bklten-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; - /* Force backlight to be disabled to match state at boot. */ - output-low; - }; + /* Force backlight to be disabled to match state at boot. */ + output-low; }; - ap_suspend_l_neuter: ap-suspend-l-neuter { - pinmux { - pins = "gpio27"; - function = "gpio"; - }; - - pinconf { - pins = "gpio27"; - bias-disable; - }; + ap_suspend_l_neuter: ap-suspend-l-neuter-state { + pins = "gpio27"; + function = "gpio"; + bias-disable; }; - bios_flash_wp_l: bios-flash-wp-l { - pinmux { - pins = "gpio66"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio66"; - bias-disable; - }; + bios_flash_wp_l: bios-flash-wp-l-state { + pins = "gpio66"; + function = "gpio"; + bias-disable; }; - edp_brij_en: edp-brij-en { - pinmux { - pins = "gpio104"; - function = "gpio"; - }; - - pinconf { - pins = "gpio104"; - drive-strength = <2>; - bias-disable; - }; + edp_brij_en: edp-brij-en-state { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - en_pp3300_codec: en-pp3300-codec { - pinmux { - pins = "gpio83"; - function = "gpio"; - }; - - pinconf { - pins = "gpio83"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_codec: en-pp3300-codec-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - en_pp3300_dx_edp: en-pp3300-dx-edp { - pinmux { - pins = "gpio30"; - function = "gpio"; - }; - - pinconf { - pins = "gpio30"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_dx_edp: en-pp3300-dx-edp-state { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - en_pp3300_hub: en-pp3300-hub { - pinmux { - pins = "gpio84"; - function = "gpio"; - }; - - pinconf { - pins = "gpio84"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_hub: en-pp3300-hub-state { + pins = "gpio84"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - fp_to_ap_irq_l: fp-to-ap-irq-l { - pinmux { - pins = "gpio4"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio4"; - - /* Has external pullup */ - bias-disable; - }; + fp_rst_l: fp-rst-l-state { + pins = "gpio22"; + function = "gpio"; + bias-disable; + drive-strength = <2>; }; - h1_ap_int_odl: h1-ap-int-odl { - pinmux { - pins = "gpio42"; - function = "gpio"; - input-enable; - }; + fp_to_ap_irq_l: fp-to-ap-irq-l-state { + pins = "gpio4"; + function = "gpio"; - pinconf { - pins = "gpio42"; - bias-pull-up; - }; + /* Has external pullup */ + bias-disable; }; - hp_irq: hp-irq { - pinmux { - pins = "gpio28"; - function = "gpio"; - }; - - pinconf { - pins = "gpio28"; - bias-pull-up; - }; + fpmcu_boot0: fpmcu-boot0-state { + pins = "gpio10"; + function = "gpio"; + bias-disable; }; - pen_irq_l: pen-irq-l { - pinmux { - pins = "gpio21"; - function = "gpio"; - }; - - pinconf { - pins = "gpio21"; - - /* Has external pullup */ - bias-disable; - }; + h1_ap_int_odl: h1-ap-int-odl-state { + pins = "gpio42"; + function = "gpio"; + bias-pull-up; }; - pen_pdct_l: pen-pdct-l { - pinmux { - pins = "gpio52"; - function = "gpio"; - }; + hp_irq: hp-irq-state { + pins = "gpio28"; + function = "gpio"; + bias-pull-up; + }; - pinconf { - pins = "gpio52"; + pen_irq_l: pen-irq-l-state { + pins = "gpio21"; + function = "gpio"; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; - pen_rst_odl: pen-rst-odl { - pinmux { - pins = "gpio18"; - function = "gpio"; - }; - - pinconf { - pins = "gpio18"; - bias-disable; - drive-strength = <2>; + pen_pdct_l: pen-pdct-l-state-state { + pins = "gpio52"; + function = "gpio"; - /* - * The pen driver doesn't currently support - * driving this reset line. By specifying - * output-high here we're relying on the fact - * that this pin has a default pulldown at boot - * (which makes sure the pen was in reset if it - * was powered) and then we set it high here to - * take it out of reset. Better would be if the - * pen driver could control this and we could - * remove "output-high" here. - */ - output-high; /* TODO: Remove this? */ - }; + /* Has external pullup */ + bias-disable; }; - p_sensor_int_l: p-sensor-int-l { - pinmux { - pins = "gpio24"; - function = "gpio"; - input-enable; - }; + pen_rst_odl: pen-rst-odl-state { + pins = "gpio18"; + function = "gpio"; + bias-disable; + drive-strength = <2>; - pinconf { - pins = "gpio24"; - /* Has external pullup */ - bias-disable; - }; + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; /* TODO: Remove this? */ }; - qup_spi0_cs_gpio_init_high: qup-spi0-cs-gpio-init-high { - pinconf { - pins = "gpio37"; - output-high; - }; - }; + p_sensor_int_l: p-sensor-int-l-state { + pins = "gpio24"; + function = "gpio"; - qup_spi6_cs_gpio_init_high: qup-spi6-cs-gpio-init-high { - pinconf { - pins = "gpio62"; - output-high; - }; + /* Has external pullup */ + bias-disable; }; - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high { - pinconf { - pins = "gpio89"; - output-high; - }; - }; + qspi_sleep: qspi-sleep-state { + pins = "gpio63", "gpio64", "gpio65", "gpio68"; - qup_uart3_sleep: qup-uart3-sleep { - pinmux { - pins = "gpio38", "gpio39", - "gpio40", "gpio41"; - function = "gpio"; - }; + /* + * When we're not actively transferring we want pins as GPIOs + * with output disabled so that the quad SPI IP block stops + * driving them. We rely on the normal pulls configured in + * the active state and don't redefine them here. Also note + * that we don't need the reverse (output-enable) in the + * normal mode since the "output-enable" only matters for + * GPIO function. + */ + function = "gpio"; + output-disable; + }; - pinconf-cts { + qup_uart3_sleep: qup-uart3-sleep-state { + cts-pins { /* * Configure a pull-down on CTS to match the pull of * the Bluetooth module. */ pins = "gpio38"; + function = "gpio"; bias-pull-down; }; - pinconf-rts { + rts-pins { /* * Configure pull-down on RTS. As RTS is active low * signal, pull it low to indicate the BT SoC that it * can wakeup the system anytime from suspend state by * pulling RX low (by sending wakeup bytes). */ - pins = "gpio39"; - bias-pull-down; + pins = "gpio39"; + function = "gpio"; + bias-pull-down; }; - pinconf-tx { + tx-pins { /* * Configure pull-up on TX when it isn't actively driven * to prevent BT SoC from receiving garbage during sleep. */ pins = "gpio40"; + function = "gpio"; bias-pull-up; }; - pinconf-rx { + rx-pins { /* * Configure a pull-up on RX. This is needed to avoid * garbage data when the TX pin of the Bluetooth module * is floating which may cause spurious wakeups. */ pins = "gpio41"; + function = "gpio"; bias-pull-up; }; }; /* Named trackpad_int_1v8_odl on earlier revision schematics */ trackpad_int_1v8_odl: - tp_int_odl: tp-int-odl { - pinmux { - pins = "gpio0"; - function = "gpio"; - }; - - pinconf { - pins = "gpio0"; + tp_int_odl: tp-int-odl-state { + pins = "gpio0"; + function = "gpio"; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; - ts_int_l: ts-int-l { - pinmux { - pins = "gpio9"; - function = "gpio"; - }; - - pinconf { - pins = "gpio9"; - bias-pull-up; - }; + ts_int_l: ts-int-l-state { + pins = "gpio9"; + function = "gpio"; + bias-pull-up; }; - ts_reset_l: ts-reset-l { - pinmux { - pins = "gpio8"; - function = "gpio"; - }; + ts_reset_l: ts-reset-l-state { + pins = "gpio8"; + function = "gpio"; + bias-disable; - pinconf { - pins = "gpio8"; - bias-disable; - drive-strength = <2>; - }; + /* + * The reset GPIO to the touchscreen takes almost 2ms to drop + * at the default drive strength. When we bump it up to 8mA it + * falls in under 500us. We want this to be fast since the Elan + * datasheet (and any drivers written based on it) talk about using + * a 500 us reset pulse. + */ + drive-strength = <8>; }; - sdc1_on: sdc1-on { - pinconf-clk { + sdc1_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - pinconf-cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <16>; }; - pinconf-data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <16>; }; - pinconf-rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc1_off: sdc1-off { - pinconf-clk { + sdc1_off: sdc1-off-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - pinconf-cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - pinconf-data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - pinconf-rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc2_on: sdc2-on { - pinconf-clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - pinconf-cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - pinconf-data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; - pinconf-sd-cd { + sd-cd-pins { pins = "gpio69"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; - sdc2_off: sdc2-off { - pinconf-clk { + sdc2_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - pinconf-cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - pinconf-data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; }; - pinconf-sd-cd { + sd-cd-pins { pins = "gpio69"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; - uf_cam_en: uf-cam-en { - pinmux { - pins = "gpio6"; - function = "gpio"; - }; + uf_cam_en: uf-cam-en-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; - pinconf { - pins = "gpio6"; - drive-strength = <2>; - /* External pull down */ - bias-disable; - }; + /* External pull down */ + bias-disable; }; - wf_cam_en: wf-cam-en { - pinmux { - pins = "gpio7"; - function = "gpio"; - }; + wf_cam_en: wf-cam-en-state { + pins = "gpio7"; + function = "gpio"; + drive-strength = <2>; - pinconf { - pins = "gpio7"; - drive-strength = <2>; - /* External pull down */ - bias-disable; - }; + /* External pull down */ + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 58976a1ba06b..a65be760d1a7 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -27,8 +27,6 @@ #address-cells = <2>; #size-cells = <2>; - chosen { }; - aliases { mmc1 = &sdhc_1; mmc2 = &sdhc_2; @@ -54,6 +52,8 @@ spi11 = &spi11; }; + chosen { }; + clocks { xo_board: xo-board { compatible = "fixed-clock"; @@ -68,62 +68,6 @@ }; }; - reserved_memory: reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - hyp_mem: memory@80000000 { - reg = <0x0 0x80000000 0x0 0x600000>; - no-map; - }; - - xbl_mem: memory@80600000 { - reg = <0x0 0x80600000 0x0 0x200000>; - no-map; - }; - - aop_mem: memory@80800000 { - reg = <0x0 0x80800000 0x0 0x20000>; - no-map; - }; - - aop_cmd_db_mem: memory@80820000 { - reg = <0x0 0x80820000 0x0 0x20000>; - compatible = "qcom,cmd-db"; - no-map; - }; - - sec_apps_mem: memory@808ff000 { - reg = <0x0 0x808ff000 0x0 0x1000>; - no-map; - }; - - smem_mem: memory@80900000 { - reg = <0x0 0x80900000 0x0 0x200000>; - no-map; - }; - - tz_mem: memory@80b00000 { - reg = <0x0 0x80b00000 0x0 0x3900000>; - no-map; - }; - - ipa_fw_mem: memory@8b700000 { - reg = <0 0x8b700000 0 0x10000>; - no-map; - }; - - rmtfs_mem: memory@94600000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0 0x94600000 0x0 0x200000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = <15>; - }; - }; - cpus { #address-cells = <2>; #size-cells = <0>; @@ -132,6 +76,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -146,9 +91,13 @@ qcom,freq-domain = <&cpufreq_hw 0>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; + cache-unified; }; }; }; @@ -157,6 +106,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -171,6 +121,8 @@ qcom,freq-domain = <&cpufreq_hw 0>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -179,6 +131,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -193,6 +146,8 @@ qcom,freq-domain = <&cpufreq_hw 0>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -201,6 +156,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -215,6 +171,8 @@ qcom,freq-domain = <&cpufreq_hw 0>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -223,6 +181,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -237,6 +196,8 @@ qcom,freq-domain = <&cpufreq_hw 0>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -245,6 +206,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -259,6 +221,8 @@ qcom,freq-domain = <&cpufreq_hw 0>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -267,6 +231,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -281,6 +246,8 @@ qcom,freq-domain = <&cpufreq_hw 1>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -289,6 +256,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -303,6 +271,8 @@ qcom,freq-domain = <&cpufreq_hw 1>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -398,6 +368,18 @@ }; }; + firmware { + scm: scm { + compatible = "qcom,scm-sc7180", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -538,10 +520,42 @@ }; }; - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the size */ - reg = <0 0x80000000 0 0>; + qspi_opp_table: opp-table-qspi { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; }; pmu { @@ -549,9 +563,64 @@ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; }; - firmware { - scm { - compatible = "qcom,scm-sc7180", "qcom,scm"; + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x200000>; + no-map; + }; + + aop_mem: memory@80800000 { + reg = <0x0 0x80800000 0x0 0x20000>; + no-map; + }; + + aop_cmd_db_mem: memory@80820000 { + reg = <0x0 0x80820000 0x0 0x20000>; + compatible = "qcom,cmd-db"; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0x0 0x808ff000 0x0 0x1000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + + tz_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x3900000>; + no-map; + }; + + ipa_fw_mem: memory@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; + + rmtfs_mem: memory@94600000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x94600000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; }; }; @@ -640,11 +709,6 @@ }; }; - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -662,6 +726,7 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + power-domains = <&rpmhpd SC7180_CX>; }; qfprom: efuse@784000 { @@ -689,8 +754,8 @@ sdhc_1: mmc@7c4000 { compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; - reg = <0 0x7c4000 0 0x1000>, - <0 0x07c5000 0 0x1000>; + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>; reg-names = "hc", "cqhci"; iommus = <&apps_smmu 0x60 0x0>; @@ -738,25 +803,6 @@ }; }; - qup_opp_table: opp-table-qup { - compatible = "operating-points-v2"; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-128000000 { - opp-hz = /bits/ 64 <128000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x008c0000 0 0x6000>; @@ -795,7 +841,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi0_default>; + pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -849,7 +895,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi1_default>; + pinctrl-0 = <&qup_spi1_spi>, <&qup_spi1_cs>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -939,7 +985,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi3_default>; + pinctrl-0 = <&qup_spi3_spi>, <&qup_spi3_cs>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1029,7 +1075,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi5_default>; + pinctrl-0 = <&qup_spi5_spi>, <&qup_spi5_cs>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1096,7 +1142,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi6_default>; + pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1186,7 +1232,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi8_default>; + pinctrl-0 = <&qup_spi8_spi>, <&qup_spi8_cs>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1276,7 +1322,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi10_default>; + pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1330,7 +1376,7 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_spi11_default>; + pinctrl-0 = <&qup_spi11_spi>, <&qup_spi11_cs>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1420,9 +1466,9 @@ iommus = <&apps_smmu 0x440 0x0>, <&apps_smmu 0x442 0x0>; - reg = <0 0x1e40000 0 0x7000>, - <0 0x1e47000 0 0x2000>, - <0 0x1e04000 0 0x2c000>; + reg = <0 0x01e40000 0 0x7000>, + <0 0x01e47000 0 0x2000>, + <0 0x01e04000 0 0x2c000>; reg-names = "ipa-reg", "ipa-shared", "gsi"; @@ -1486,417 +1532,454 @@ gpio-ranges = <&tlmm 0 0 120>; wakeup-parent = <&pdc>; - dp_hot_plug_det: dp-hot-plug-det { - pinmux { - pins = "gpio117"; - function = "dp_hot"; - }; + dp_hot_plug_det: dp-hot-plug-det-state { + pins = "gpio117"; + function = "dp_hot"; }; - qspi_clk: qspi-clk { - pinmux { - pins = "gpio63"; - function = "qspi_clk"; - }; + qspi_clk: qspi-clk-state { + pins = "gpio63"; + function = "qspi_clk"; }; - qspi_cs0: qspi-cs0 { - pinmux { - pins = "gpio68"; - function = "qspi_cs"; - }; + qspi_cs0: qspi-cs0-state { + pins = "gpio68"; + function = "qspi_cs"; }; - qspi_cs1: qspi-cs1 { - pinmux { - pins = "gpio72"; - function = "qspi_cs"; - }; + qspi_cs1: qspi-cs1-state { + pins = "gpio72"; + function = "qspi_cs"; }; - qspi_data01: qspi-data01 { - pinmux-data { - pins = "gpio64", "gpio65"; - function = "qspi_data"; - }; + qspi_data0: qspi-data0-state { + pins = "gpio64"; + function = "qspi_data"; }; - qspi_data12: qspi-data12 { - pinmux-data { - pins = "gpio66", "gpio67"; - function = "qspi_data"; - }; + qspi_data1: qspi-data1-state { + pins = "gpio65"; + function = "qspi_data"; }; - qup_i2c0_default: qup-i2c0-default { - pinmux { - pins = "gpio34", "gpio35"; - function = "qup00"; - }; + qspi_data23: qspi-data23-state { + pins = "gpio66", "gpio67"; + function = "qspi_data"; }; - qup_i2c1_default: qup-i2c1-default { - pinmux { - pins = "gpio0", "gpio1"; - function = "qup01"; - }; + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio34", "gpio35"; + function = "qup00"; }; - qup_i2c2_default: qup-i2c2-default { - pinmux { - pins = "gpio15", "gpio16"; - function = "qup02_i2c"; - }; + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio0", "gpio1"; + function = "qup01"; }; - qup_i2c3_default: qup-i2c3-default { - pinmux { - pins = "gpio38", "gpio39"; - function = "qup03"; - }; + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio15", "gpio16"; + function = "qup02_i2c"; }; - qup_i2c4_default: qup-i2c4-default { - pinmux { - pins = "gpio115", "gpio116"; - function = "qup04_i2c"; - }; + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio38", "gpio39"; + function = "qup03"; }; - qup_i2c5_default: qup-i2c5-default { - pinmux { - pins = "gpio25", "gpio26"; - function = "qup05"; - }; + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio115", "gpio116"; + function = "qup04_i2c"; }; - qup_i2c6_default: qup-i2c6-default { - pinmux { - pins = "gpio59", "gpio60"; - function = "qup10"; - }; + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio25", "gpio26"; + function = "qup05"; }; - qup_i2c7_default: qup-i2c7-default { - pinmux { - pins = "gpio6", "gpio7"; - function = "qup11_i2c"; - }; + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio59", "gpio60"; + function = "qup10"; }; - qup_i2c8_default: qup-i2c8-default { - pinmux { - pins = "gpio42", "gpio43"; - function = "qup12"; - }; + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio6", "gpio7"; + function = "qup11_i2c"; }; - qup_i2c9_default: qup-i2c9-default { - pinmux { - pins = "gpio46", "gpio47"; - function = "qup13_i2c"; - }; + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio42", "gpio43"; + function = "qup12"; }; - qup_i2c10_default: qup-i2c10-default { - pinmux { - pins = "gpio86", "gpio87"; - function = "qup14"; - }; + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio46", "gpio47"; + function = "qup13_i2c"; }; - qup_i2c11_default: qup-i2c11-default { - pinmux { - pins = "gpio53", "gpio54"; - function = "qup15"; - }; + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio86", "gpio87"; + function = "qup14"; + }; + + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio53", "gpio54"; + function = "qup15"; + }; + + qup_spi0_spi: qup-spi0-spi-state { + pins = "gpio34", "gpio35", "gpio36"; + function = "qup00"; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio37"; + function = "qup00"; + }; + + qup_spi0_cs_gpio: qup-spi0-cs-gpio-state { + pins = "gpio37"; + function = "gpio"; + }; + + qup_spi1_spi: qup-spi1-spi-state { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup01"; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio3"; + function = "qup01"; + }; + + qup_spi1_cs_gpio: qup-spi1-cs-gpio-state { + pins = "gpio3"; + function = "gpio"; + }; + + qup_spi3_spi: qup-spi3-spi-state { + pins = "gpio38", "gpio39", "gpio40"; + function = "qup03"; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio41"; + function = "qup03"; + }; + + qup_spi3_cs_gpio: qup-spi3-cs-gpio-state { + pins = "gpio41"; + function = "gpio"; + }; + + qup_spi5_spi: qup-spi5-spi-state { + pins = "gpio25", "gpio26", "gpio27"; + function = "qup05"; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio28"; + function = "qup05"; + }; + + qup_spi5_cs_gpio: qup-spi5-cs-gpio-state { + pins = "gpio28"; + function = "gpio"; + }; + + qup_spi6_spi: qup-spi6-spi-state { + pins = "gpio59", "gpio60", "gpio61"; + function = "qup10"; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio62"; + function = "qup10"; + }; + + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { + pins = "gpio62"; + function = "gpio"; }; - qup_spi0_default: qup-spi0-default { - pinmux { - pins = "gpio34", "gpio35", - "gpio36", "gpio37"; + qup_spi8_spi: qup-spi8-spi-state { + pins = "gpio42", "gpio43", "gpio44"; + function = "qup12"; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio45"; + function = "qup12"; + }; + + qup_spi8_cs_gpio: qup-spi8-cs-gpio-state { + pins = "gpio45"; + function = "gpio"; + }; + + qup_spi10_spi: qup-spi10-spi-state { + pins = "gpio86", "gpio87", "gpio88"; + function = "qup14"; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio89"; + function = "qup14"; + }; + + qup_spi10_cs_gpio: qup-spi10-cs-gpio-state { + pins = "gpio89"; + function = "gpio"; + }; + + qup_spi11_spi: qup-spi11-spi-state { + pins = "gpio53", "gpio54", "gpio55"; + function = "qup15"; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio56"; + function = "qup15"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { + pins = "gpio56"; + function = "gpio"; + }; + + qup_uart0_default: qup-uart0-default-state { + qup_uart0_cts: cts-pins { + pins = "gpio34"; function = "qup00"; }; - }; - qup_spi0_cs_gpio: qup-spi0-cs-gpio { - pinmux { - pins = "gpio34", "gpio35", - "gpio36"; + qup_uart0_rts: rts-pins { + pins = "gpio35"; function = "qup00"; }; - pinmux-cs { + qup_uart0_tx: tx-pins { + pins = "gpio36"; + function = "qup00"; + }; + + qup_uart0_rx: rx-pins { pins = "gpio37"; - function = "gpio"; + function = "qup00"; }; }; - qup_spi1_default: qup-spi1-default { - pinmux { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; + qup_uart1_default: qup-uart1-default-state { + qup_uart1_cts: cts-pins { + pins = "gpio0"; function = "qup01"; }; - }; - qup_spi1_cs_gpio: qup-spi1-cs-gpio { - pinmux { - pins = "gpio0", "gpio1", - "gpio2"; + qup_uart1_rts: rts-pins { + pins = "gpio1"; function = "qup01"; }; - pinmux-cs { - pins = "gpio3"; - function = "gpio"; + qup_uart1_tx: tx-pins { + pins = "gpio2"; + function = "qup01"; }; - }; - qup_spi3_default: qup-spi3-default { - pinmux { - pins = "gpio38", "gpio39", - "gpio40", "gpio41"; - function = "qup03"; + qup_uart1_rx: rx-pins { + pins = "gpio3"; + function = "qup01"; }; }; - qup_spi3_cs_gpio: qup-spi3-cs-gpio { - pinmux { - pins = "gpio38", "gpio39", - "gpio40"; - function = "qup03"; + qup_uart2_default: qup-uart2-default-state { + qup_uart2_tx: tx-pins { + pins = "gpio15"; + function = "qup02_uart"; }; - pinmux-cs { - pins = "gpio41"; - function = "gpio"; + qup_uart2_rx: rx-pins { + pins = "gpio16"; + function = "qup02_uart"; }; }; - qup_spi5_default: qup-spi5-default { - pinmux { - pins = "gpio25", "gpio26", - "gpio27", "gpio28"; - function = "qup05"; + qup_uart3_default: qup-uart3-default-state { + qup_uart3_cts: cts-pins { + pins = "gpio38"; + function = "qup03"; }; - }; - qup_spi5_cs_gpio: qup-spi5-cs-gpio { - pinmux { - pins = "gpio25", "gpio26", - "gpio27"; - function = "qup05"; + qup_uart3_rts: rts-pins { + pins = "gpio39"; + function = "qup03"; }; - pinmux-cs { - pins = "gpio28"; - function = "gpio"; + qup_uart3_tx: tx-pins { + pins = "gpio40"; + function = "qup03"; }; - }; - qup_spi6_default: qup-spi6-default { - pinmux { - pins = "gpio59", "gpio60", - "gpio61", "gpio62"; - function = "qup10"; + qup_uart3_rx: rx-pins { + pins = "gpio41"; + function = "qup03"; }; }; - qup_spi6_cs_gpio: qup-spi6-cs-gpio { - pinmux { - pins = "gpio59", "gpio60", - "gpio61"; - function = "qup10"; + qup_uart4_default: qup-uart4-default-state { + qup_uart4_tx: tx-pins { + pins = "gpio115"; + function = "qup04_uart"; }; - pinmux-cs { - pins = "gpio62"; - function = "gpio"; + qup_uart4_rx: rx-pins { + pins = "gpio116"; + function = "qup04_uart"; }; }; - qup_spi8_default: qup-spi8-default { - pinmux { - pins = "gpio42", "gpio43", - "gpio44", "gpio45"; - function = "qup12"; + qup_uart5_default: qup-uart5-default-state { + qup_uart5_cts: cts-pins { + pins = "gpio25"; + function = "qup05"; }; - }; - qup_spi8_cs_gpio: qup-spi8-cs-gpio { - pinmux { - pins = "gpio42", "gpio43", - "gpio44"; - function = "qup12"; + qup_uart5_rts: rts-pins { + pins = "gpio26"; + function = "qup05"; }; - pinmux-cs { - pins = "gpio45"; - function = "gpio"; + qup_uart5_tx: tx-pins { + pins = "gpio27"; + function = "qup05"; }; - }; - qup_spi10_default: qup-spi10-default { - pinmux { - pins = "gpio86", "gpio87", - "gpio88", "gpio89"; - function = "qup14"; + qup_uart5_rx: rx-pins { + pins = "gpio28"; + function = "qup05"; }; }; - qup_spi10_cs_gpio: qup-spi10-cs-gpio { - pinmux { - pins = "gpio86", "gpio87", - "gpio88"; - function = "qup14"; + qup_uart6_default: qup-uart6-default-state { + qup_uart6_cts: cts-pins { + pins = "gpio59"; + function = "qup10"; }; - pinmux-cs { - pins = "gpio89"; - function = "gpio"; + qup_uart6_rts: rts-pins { + pins = "gpio60"; + function = "qup10"; }; - }; - qup_spi11_default: qup-spi11-default { - pinmux { - pins = "gpio53", "gpio54", - "gpio55", "gpio56"; - function = "qup15"; + qup_uart6_tx: tx-pins { + pins = "gpio61"; + function = "qup10"; + }; + + qup_uart6_rx: rx-pins { + pins = "gpio62"; + function = "qup10"; }; }; - qup_spi11_cs_gpio: qup-spi11-cs-gpio { - pinmux { - pins = "gpio53", "gpio54", - "gpio55"; - function = "qup15"; + qup_uart7_default: qup-uart7-default-state { + qup_uart7_tx: tx-pins { + pins = "gpio6"; + function = "qup11_uart"; }; - pinmux-cs { - pins = "gpio56"; - function = "gpio"; + qup_uart7_rx: rx-pins { + pins = "gpio7"; + function = "qup11_uart"; }; }; - qup_uart0_default: qup-uart0-default { - pinmux { - pins = "gpio34", "gpio35", - "gpio36", "gpio37"; - function = "qup00"; + qup_uart8_default: qup-uart8-default-state { + qup_uart8_tx: tx-pins { + pins = "gpio44"; + function = "qup12"; }; - }; - qup_uart1_default: qup-uart1-default { - pinmux { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - function = "qup01"; + qup_uart8_rx: rx-pins { + pins = "gpio45"; + function = "qup12"; }; }; - qup_uart2_default: qup-uart2-default { - pinmux { - pins = "gpio15", "gpio16"; - function = "qup02_uart"; + qup_uart9_default: qup-uart9-default-state { + qup_uart9_tx: tx-pins { + pins = "gpio46"; + function = "qup13_uart"; }; - }; - qup_uart3_default: qup-uart3-default { - pinmux { - pins = "gpio38", "gpio39", - "gpio40", "gpio41"; - function = "qup03"; + qup_uart9_rx: rx-pins { + pins = "gpio47"; + function = "qup13_uart"; }; }; - qup_uart4_default: qup-uart4-default { - pinmux { - pins = "gpio115", "gpio116"; - function = "qup04_uart"; + qup_uart10_default: qup-uart10-default-state { + qup_uart10_cts: cts-pins { + pins = "gpio86"; + function = "qup14"; }; - }; - qup_uart5_default: qup-uart5-default { - pinmux { - pins = "gpio25", "gpio26", - "gpio27", "gpio28"; - function = "qup05"; + qup_uart10_rts: rts-pins { + pins = "gpio87"; + function = "qup14"; }; - }; - qup_uart6_default: qup-uart6-default { - pinmux { - pins = "gpio59", "gpio60", - "gpio61", "gpio62"; - function = "qup10"; + qup_uart10_tx: tx-pins { + pins = "gpio88"; + function = "qup14"; }; - }; - qup_uart7_default: qup-uart7-default { - pinmux { - pins = "gpio6", "gpio7"; - function = "qup11_uart"; + qup_uart10_rx: rx-pins { + pins = "gpio89"; + function = "qup14"; }; }; - qup_uart8_default: qup-uart8-default { - pinmux { - pins = "gpio44", "gpio45"; - function = "qup12"; + qup_uart11_default: qup-uart11-default-state { + qup_uart11_cts: cts-pins { + pins = "gpio53"; + function = "qup15"; }; - }; - qup_uart9_default: qup-uart9-default { - pinmux { - pins = "gpio46", "gpio47"; - function = "qup13_uart"; + qup_uart11_rts: rts-pins { + pins = "gpio54"; + function = "qup15"; }; - }; - qup_uart10_default: qup-uart10-default { - pinmux { - pins = "gpio86", "gpio87", - "gpio88", "gpio89"; - function = "qup14"; + qup_uart11_tx: tx-pins { + pins = "gpio55"; + function = "qup15"; }; - }; - qup_uart11_default: qup-uart11-default { - pinmux { - pins = "gpio53", "gpio54", - "gpio55", "gpio56"; + qup_uart11_rx: rx-pins { + pins = "gpio56"; function = "qup15"; }; }; - sec_mi2s_active: sec-mi2s-active { - pinmux { - pins = "gpio49", "gpio50", "gpio51"; - function = "mi2s_1"; - }; + sec_mi2s_active: sec-mi2s-active-state { + pins = "gpio49", "gpio50", "gpio51"; + function = "mi2s_1"; }; - pri_mi2s_active: pri-mi2s-active { - pinmux { - pins = "gpio53", "gpio54", "gpio55", "gpio56"; - function = "mi2s_0"; - }; + pri_mi2s_active: pri-mi2s-active-state { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + function = "mi2s_0"; }; - pri_mi2s_mclk_active: pri-mi2s-mclk-active { - pinmux { - pins = "gpio57"; - function = "lpass_ext"; - }; + pri_mi2s_mclk_active: pri-mi2s-mclk-active-state { + pins = "gpio57"; + function = "lpass_ext"; }; }; remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sc7180-mpss-pas"; - reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; - reg-names = "qdsp6", "rmb"; + reg = <0 0x04080000 0 0x4040>; interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, @@ -1907,14 +1990,8 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack"; - clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, - <&gcc GCC_MSS_NAV_AXI_CLK>, - <&gcc GCC_MSS_SNOC_AXI_CLK>, - <&gcc GCC_MSS_MFAB_AXIS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "bus", "nav", "snoc_axi", - "mnoc_axi", "xo"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; power-domains = <&rpmhpd SC7180_CX>, <&rpmhpd SC7180_MX>, @@ -1928,13 +2005,6 @@ qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; - resets = <&aoss_reset AOSS_CC_MSS_RESTART>, - <&pdc_reset PDC_MODEM_SYNC_RESET>; - reset-names = "mss_restart", "pdc_reset"; - - qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; - qcom,spare-regs = <&tcsr_regs_2 0xb3e4>; - status = "disabled"; glink-edge { @@ -2089,6 +2159,12 @@ #power-domain-cells = <1>; }; + dma@10a2000 { + compatible = "qcom,sc7180-dcc", "qcom,dcc"; + reg = <0x0 0x010a2000 0x0 0x1000>, + <0x0 0x010ae000 0x0 0x2000>; + }; + stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x06002000 0 0x1000>, @@ -2621,25 +2697,6 @@ }; }; - qspi_opp_table: opp-table-qspi { - compatible = "operating-points-v2"; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-150000000 { - opp-hz = /bits/ 64 <150000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - qspi: spi@88dc000 { compatible = "qcom,sc7180-qspi", "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x600>; @@ -2725,7 +2782,7 @@ system-cache-controller@9200000 { compatible = "qcom,sc7180-llcc"; reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg-names = "llcc0_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -2775,6 +2832,7 @@ "dm_hs_phy_irq", "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_PRIM_BCR>; @@ -2782,6 +2840,8 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; + wakeup-source; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xe000>; @@ -2884,7 +2944,7 @@ #power-domain-cells = <1>; }; - mdss: mdss@ae00000 { + mdss: display-subsystem@ae00000 { compatible = "qcom,sc7180-mdss"; reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; @@ -2981,11 +3041,11 @@ required-opps = <&rpmhpd_opp_nom>; }; }; - }; dsi0: dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sc7180-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; reg-names = "dsi_ctrl"; @@ -3012,7 +3072,6 @@ power-domains = <&rpmhpd SC7180_CX>; phys = <&dsi_phy>; - phy-names = "dsi"; #address-cells = <1>; #size-cells = <0>; @@ -3057,7 +3116,7 @@ }; }; - dsi_phy: dsi-phy@ae94400 { + dsi_phy: phy@ae94400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, @@ -3080,11 +3139,11 @@ compatible = "qcom,sc7180-dp"; status = "disabled"; - reg = <0 0xae90000 0 0x200>, - <0 0xae90200 0 0x200>, - <0 0xae90400 0 0xc00>, - <0 0xae91000 0 0x400>, - <0 0xae91400 0 0x400>; + reg = <0 0x0ae90000 0 0x200>, + <0 0x0ae90200 0 0x200>, + <0 0x0ae90400 0 0xc00>, + <0 0x0ae91000 0 0x400>, + <0 0x0ae91400 0 0x400>; interrupt-parent = <&mdss>; interrupts = <12>; @@ -3119,7 +3178,7 @@ port@1 { reg = <1>; - dp_out: endpoint { }; + mdss_dp_out: endpoint { }; }; }; @@ -3212,7 +3271,7 @@ #reset-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; @@ -3238,11 +3297,10 @@ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sram@146aa000 { @@ -3369,7 +3427,8 @@ }; apss_shared: mailbox@17c00000 { - compatible = "qcom,sc7180-apss-shared"; + compatible = "qcom,sc7180-apss-shared", + "qcom,sdm845-apss-shared"; reg = <0 0x17c00000 0 0x10000>; #mbox-cells = <1>; }; @@ -3381,7 +3440,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; - timer@17c20000{ + timer@17c20000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0x20000000>; @@ -3522,7 +3581,7 @@ }; osm_l3: interconnect@18321000 { - compatible = "qcom,sc7180-osm-l3"; + compatible = "qcom,sc7180-osm-l3", "qcom,osm-l3"; reg = <0 0x18321000 0 0x1400>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; @@ -3532,7 +3591,7 @@ }; cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sc7180-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; @@ -3540,6 +3599,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; wifi: wifi@18800000 { @@ -3589,6 +3649,7 @@ <&apps_smmu 0x1032 0>; power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + required-opps = <&rpmhpd_opp_nom>; status = "disabled"; @@ -3619,6 +3680,8 @@ clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "bi_tcxo"; + power-domains = <&rpmhpd SC7180_CX>; + #clock-cells = <1>; #power-domain-cells = <1>; }; @@ -3645,7 +3708,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3694,7 +3757,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3743,7 +3806,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3792,7 +3855,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3841,7 +3904,7 @@ type = "passive"; }; - cpu4_crit: cpu_crit { + cpu4_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3890,7 +3953,7 @@ type = "passive"; }; - cpu5_crit: cpu_crit { + cpu5_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3939,7 +4002,7 @@ type = "passive"; }; - cpu6_crit: cpu_crit { + cpu6_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3980,7 +4043,7 @@ type = "passive"; }; - cpu7_crit: cpu_crit { + cpu7_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4021,7 +4084,7 @@ type = "passive"; }; - cpu8_crit: cpu_crit { + cpu8_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4062,7 +4125,7 @@ type = "passive"; }; - cpu9_crit: cpu_crit { + cpu9_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4096,7 +4159,7 @@ type = "hot"; }; - aoss0_crit: aoss0_crit { + aoss0_crit: aoss0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4116,7 +4179,7 @@ hysteresis = <2000>; type = "hot"; }; - cpuss0_crit: cluster0_crit { + cpuss0_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4136,7 +4199,7 @@ hysteresis = <2000>; type = "hot"; }; - cpuss1_crit: cluster0_crit { + cpuss1_crit: cluster0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4157,7 +4220,7 @@ type = "passive"; }; - gpuss0_crit: gpuss0_crit { + gpuss0_crit: gpuss0-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4185,7 +4248,7 @@ type = "passive"; }; - gpuss1_crit: gpuss1_crit { + gpuss1_crit: gpuss1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4213,7 +4276,7 @@ type = "hot"; }; - aoss1_crit: aoss1_crit { + aoss1_crit: aoss1-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4234,7 +4297,7 @@ type = "hot"; }; - cwlan_crit: cwlan_crit { + cwlan_crit: cwlan-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4255,7 +4318,7 @@ type = "hot"; }; - audio_crit: audio_crit { + audio_crit: audio-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4276,7 +4339,7 @@ type = "hot"; }; - ddr_crit: ddr_crit { + ddr_crit: ddr-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4297,7 +4360,7 @@ type = "hot"; }; - q6_hvx_crit: q6_hvx_crit { + q6_hvx_crit: q6-hvx-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4318,7 +4381,7 @@ type = "hot"; }; - camera_crit: camera_crit { + camera_crit: camera-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4339,7 +4402,7 @@ type = "hot"; }; - mdm_crit: mdm_crit { + mdm_crit: mdm-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4360,7 +4423,7 @@ type = "hot"; }; - mdm_dsp_crit: mdm_dsp_crit { + mdm_dsp_crit: mdm-dsp-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4381,7 +4444,7 @@ type = "hot"; }; - npu_crit: npu_crit { + npu_crit: npu-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -4402,7 +4465,7 @@ type = "hot"; }; - video_crit: video_crit { + video_crit: video-crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index 25f31c81b2b7..2e1cd219fc18 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -39,20 +39,10 @@ no-map; }; - mpss_mem: memory@8b800000 { - reg = <0x0 0x8b800000 0x0 0xf600000>; - no-map; - }; - wpss_mem: memory@9ae00000 { reg = <0x0 0x9ae00000 0x0 0x1900000>; no-map; }; - - mba_mem: memory@9c700000 { - reg = <0x0 0x9c700000 0x0 0x200000>; - no-map; - }; }; }; @@ -70,8 +60,9 @@ */ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; + pinctrl-1 = <&qspi_sleep>; spi_flash: flash@0 { compatible = "jedec,spi-nor"; @@ -88,9 +79,9 @@ firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt"; }; -/* Increase the size from 2.5MB to 8MB */ -&rmtfs_mem { - reg = <0x0 0x9c900000 0x0 0x800000>; +&scm { + /* TF-A firmware maps memory cached so mark dma-coherent to match. */ + dma-coherent; }; &wifi { @@ -100,3 +91,23 @@ iommus = <&apps_smmu 0x1c02 0x1>; }; }; + +/* PINCTRL - chrome-common pinctrl */ + +&tlmm { + qspi_sleep: qspi-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + + /* + * When we're not actively transferring we want pins as GPIOs + * with output disabled so that the quad SPI IP block stops + * driving them. We rely on the normal pulls configured in + * the active state and don't redefine them here. Also note + * that we don't need the reverse (output-enable) in the + * normal mode since the "output-enable" only matters for + * GPIO function. + */ + function = "gpio"; + output-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index dddb505e220b..afae7f46b050 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -27,7 +27,7 @@ }; &apps_rsc { - pmg1110-regulators { + regulators-2 { compatible = "qcom,pmg1110-rpmh-regulators"; qcom,pmic-id = "k"; @@ -118,25 +118,25 @@ ap_ts_pen_1v8: &i2c13 { }; &tlmm { - tp_int_odl: tp-int-odl { + tp_int_odl: tp-int-odl-state { pins = "gpio7"; function = "gpio"; bias-disable; }; - ts_int_l: ts-int-l { + ts_int_l: ts-int-l-state { pins = "gpio55"; function = "gpio"; bias-pull-up; }; - ts_reset_l: ts-reset-l { + ts_reset_l: ts-reset-l-state { pins = "gpio54"; function = "gpio"; bias-disable; }; - us_euro_hs_sel: us-euro-hs-sel { + us_euro_hs_sel: us-euro-hs-sel-state { pins = "gpio81"; function = "gpio"; bias-pull-down; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi new file mode 100644 index 000000000000..485f9942e128 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * + * This file defines the common audio settings for the child boards + * using rt5682 codec and having 3 dmics connected to sc7280. + * + * Copyright 2022 Google LLC. + */ + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-rt5682-max98360a-3mic"; + + audio-routing = "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "VA DMIC2", "vdd-micb", + "VA DMIC3", "vdd-micb", + + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + #address-cells = <1>; + #size-cells = <0>; + + dai-link@0 { + link-name = "MAX98360"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "DisplayPort"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "ALC5682"; + reg = <2>; + + cpu { + sound-dai = <&lpass_cpu MI2S_PRIMARY>; + }; + + codec { + sound-dai = <&alc5682 0 /* aif1 */>; + }; + }; + + dai-link@4 { + link-name = "DMIC"; + reg = <4>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; +}; + +hp_i2c: &i2c2 { + clock-frequency = <400000>; + status = "okay"; + + alc5682: codec@1a { + compatible = "realtek,rt5682s"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_irq>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <101 IRQ_TYPE_EDGE_BOTH>; + + AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; + MICVDD-supply = <&pp3300_codec>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <2>; + realtek,jd-src = <1>; + realtek,dmic-clk-rate-hz = <2048000>; + }; +}; + +&lpass_cpu { + pinctrl-names = "default"; + pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>, + <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + dai-link@0 { + reg = <MI2S_PRIMARY>; + qcom,playback-sd-lines = <1>; + qcom,capture-sd-lines = <0>; + }; + + dai-link@1 { + reg = <MI2S_SECONDARY>; + qcom,playback-sd-lines = <0>; + }; + + dai-link@5 { + reg = <LPASS_DP_RX>; + }; + + dai-link@25 { + reg = <LPASS_CDC_DMA_VA_TX0>; + }; +}; + +&lpass_va_macro { + vdd-micb-supply = <&pp1800_l2c>; + pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>, <&lpass_dmic23_clk>, + <&lpass_dmic23_data>; + + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&lpass_dmic01_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic01_data { + bias-pull-down; +}; + +&lpass_dmic23_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic23_data { + bias-pull-down; +}; + +&mi2s0_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_data1 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_mclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_ws { + drive-strength = <6>; + bias-disable; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi new file mode 100644 index 000000000000..8b855345e5c7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * + * This file defines the common audio settings for the child boards + * using rt5682 codec. + * + * Copyright 2022 Google LLC. + */ + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-rt5682-max98360a-1mic"; + + audio-routing = "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + #address-cells = <1>; + #size-cells = <0>; + + dai-link@0 { + link-name = "MAX98360"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "DisplayPort"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "ALC5682"; + reg = <2>; + + cpu { + sound-dai = <&lpass_cpu MI2S_PRIMARY>; + }; + + codec { + sound-dai = <&alc5682 0 /* aif1 */>; + }; + }; + }; +}; + +hp_i2c: &i2c2 { + clock-frequency = <400000>; + status = "okay"; + + alc5682: codec@1a { + compatible = "realtek,rt5682s"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_irq>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <101 IRQ_TYPE_EDGE_BOTH>; + + AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; + MICVDD-supply = <&pp3300_codec>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <2>; + realtek,jd-src = <1>; + realtek,dmic-clk-rate-hz = <2048000>; + }; +}; + +&lpass_cpu { + pinctrl-names = "default"; + pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>, + <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + dai-link@0 { + reg = <MI2S_PRIMARY>; + qcom,playback-sd-lines = <1>; + qcom,capture-sd-lines = <0>; + }; + + dai-link@1 { + reg = <MI2S_SECONDARY>; + qcom,playback-sd-lines = <0>; + }; + + dai-link@5 { + reg = <LPASS_DP_RX>; + }; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&mi2s0_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_data1 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_mclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s0_ws { + drive-strength = <6>; + bias-disable; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi index c72e53aaf997..020ef666e35f 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi @@ -32,12 +32,8 @@ "TX SWR_DMIC6", "DMIC7_OUTPUT", "TX SWR_DMIC7", "DMIC8_OUTPUT"; - qcom,msm-mbhc-hphl-swh = <1>; - qcom,msm-mbhc-gnd-swh = <1>; - #address-cells = <1>; #size-cells = <0>; - #sound-dai-cells = <0>; dai-link@0 { link-name = "MAX98360A"; @@ -167,10 +163,6 @@ bias-disable; }; -&lpass_dmic01_clk_sleep { - drive-strength = <2>; -}; - &lpass_dmic01_data { bias-pull-down; }; @@ -180,10 +172,6 @@ bias-disable; }; -&lpass_dmic23_clk_sleep { - drive-strength = <2>; -}; - &lpass_dmic23_data { bias-pull-down; }; @@ -194,30 +182,18 @@ bias-disable; }; -&lpass_rx_swr_clk_sleep { - bias-pull-down; -}; - &lpass_rx_swr_data { drive-strength = <2>; slew-rate = <1>; bias-bus-hold; }; -&lpass_rx_swr_data_sleep { - bias-pull-down; -}; - &lpass_tx_swr_clk { drive-strength = <2>; slew-rate = <1>; bias-disable; }; -&lpass_tx_swr_clk_sleep { - bias-pull-down; -}; - &lpass_tx_swr_data { drive-strength = <2>; slew-rate = <1>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts new file mode 100644 index 000000000000..4ee5f0b0a5de --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 CRD 3+ Pro board device tree source + * + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include "sc7280-herobrine-crd.dts" +#include "sc7280-herobrine-pro-sku.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 CRD Pro platform (rev5+)"; + compatible = "google,zoglin-sku1536", "google,hoglin-sku1536", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index f0f26af1e421..df39a64da923 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -40,7 +40,7 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ &apps_rsc { - pmg1110-regulators { + regulators-2 { compatible = "qcom,pmg1110-rpmh-regulators"; qcom,pmic-id = "k"; @@ -372,5 +372,6 @@ ap_ts_pen_1v8: &i2c13 { "", /* 170 */ "MOS_BLE_UART_TX", "MOS_BLE_UART_RX", + "", ""; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts new file mode 100644 index 000000000000..14f20e705869 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Evoker board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-evoker.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + model = "Google Evoker with LTE"; + compatible = "google,evoker-sku512", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts new file mode 100644 index 000000000000..4f781fe25c9c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Evoker board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-evoker.dtsi" +#include "sc7280-herobrine-wifi-sku.dtsi" + +/ { + model = "Google Evoker"; + compatible = "google,evoker", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi index ccbe50b6249a..0add7a2a099c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi @@ -5,14 +5,8 @@ * Copyright 2022 Google LLC. */ -/dts-v1/; - #include "sc7280-herobrine.dtsi" - -/ { - model = "Google Evoker"; - compatible = "google,evoker", "qcom,sc7280"; -}; +#include "sc7280-herobrine-audio-rt5682-3mic.dtsi" /* * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES @@ -30,16 +24,15 @@ ap_tp_i2c: &i2c0 { status = "okay"; clock-frequency = <400000>; - trackpad: trackpad@2c { - compatible = "hid-over-i2c"; - reg = <0x2c>; + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; pinctrl-names = "default"; pinctrl-0 = <&tp_int_odl>; interrupt-parent = <&tlmm>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - hid-descr-addr = <0x20>; vcc-supply = <&pp3300_z1>; wakeup-source; @@ -50,9 +43,9 @@ ts_i2c: &i2c13 { status = "okay"; clock-frequency = <400000>; - ap_ts: touchscreen@10 { - compatible = "elan,ekth6915"; - reg = <0x10>; + ap_ts: touchscreen@5d { + compatible = "goodix,gt7986u", "goodix,gt7375p"; + reg = <0x5d>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; @@ -61,7 +54,8 @@ ts_i2c: &i2c13 { reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; - vcc33-supply = <&ts_avdd>; + vdd-supply = <&ts_avdd>; + mainboard-vddio-supply = <&ts_avccio>; }; }; @@ -328,6 +322,5 @@ ts_i2c: &i2c13 { "MOS_BLE_UART_TX", "MOS_BLE_UART_RX", "", - "", ""; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts index c1a671968725..b04888a98203 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-audio-rt5682.dtsi" #include "sc7280-herobrine-lte-sku.dtsi" / { @@ -47,10 +48,6 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ -&ap_spi_fp { - status = "okay"; -}; - /* * Although the trackpad is really part of the herobrine baseboard, we'll * put the actual definition in the board device tree since different boards @@ -358,6 +355,5 @@ ts_i2c: &i2c13 { "MOS_BLE_UART_TX", "MOS_BLE_UART_RX", "", - "", ""; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi index a92eeccd2b2a..95505549adcc 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi @@ -6,12 +6,59 @@ */ /* Modem setup is different on Chrome setups than typical Qualcomm setup */ +/ { + reserved-memory { + mpss_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + mba_mem: memory@9c700000 { + reg = <0x0 0x9c700000 0x0 0x200000>; + no-map; + }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; + size = <0x0 0x4000>; + no-map; + }; + }; +}; + +&ipa { + qcom,gsi-loader = "modem"; + status = "okay"; +}; + &remoteproc_mpss { compatible = "qcom,sc7280-mss-pil"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_OFFLINE_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&rpmhcc RPMH_PKA_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "offline", "snoc_axi", "pka", "xo"; + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; - memory-region = <&mba_mem>, <&mpss_mem>; + memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>; firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn", "qcom/sc7280-herobrine/modem/qdsp6sw.mbn"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>; + qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>; + qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>; + status = "okay"; }; + +/* Increase the size from 2.5MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x9c900000 0x0 0x800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-nvme-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-nvme-sku.dtsi new file mode 100644 index 000000000000..1aed02297f44 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-nvme-sku.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine dts fragment for NVMe SKUs + * + * Copyright 2022 Google LLC. + */ + +&pcie1 { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi new file mode 100644 index 000000000000..fb4bbe8aeda0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Google Herobrine dts fragment for PRO SKUs + * + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/delete-node/ &vreg_s9c_0p676; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts index f1017809e5da..d71cc4bbc4b3 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts @@ -5,7 +5,9 @@ * Copyright 2022 Google LLC. */ -#include "sc7280-herobrine-villager-r1.dts" +/dts-v1/; + +#include "sc7280-herobrine-villager-r1.dtsi" #include "sc7280-herobrine-lte-sku.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts index cfc648726930..edb52f12f0ea 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts @@ -7,37 +7,10 @@ /dts-v1/; -#include "sc7280-herobrine-villager.dtsi" -#include "sc7280-herobrine-audio-wcd9385.dtsi" +#include "sc7280-herobrine-villager-r1.dtsi" +#include "sc7280-herobrine-wifi-sku.dtsi" / { model = "Google Villager (rev1+)"; compatible = "google,villager", "qcom,sc7280"; }; - -&lpass_va_macro { - vdd-micb-supply = <&pp1800_l2c>; -}; - -&sound { - audio-routing = - "IN1_HPHL", "HPHL_OUT", - "IN2_HPHR", "HPHR_OUT", - "AMIC1", "MIC BIAS1", - "AMIC2", "MIC BIAS2", - "VA DMIC0", "vdd-micb", - "VA DMIC1", "vdd-micb", - "VA DMIC2", "vdd-micb", - "VA DMIC3", "vdd-micb", - "TX SWR_ADC0", "ADC1_OUTPUT", - "TX SWR_ADC1", "ADC2_OUTPUT", - "TX SWR_ADC2", "ADC3_OUTPUT", - "TX SWR_DMIC0", "DMIC1_OUTPUT", - "TX SWR_DMIC1", "DMIC2_OUTPUT", - "TX SWR_DMIC2", "DMIC3_OUTPUT", - "TX SWR_DMIC3", "DMIC4_OUTPUT", - "TX SWR_DMIC4", "DMIC5_OUTPUT", - "TX SWR_DMIC5", "DMIC6_OUTPUT", - "TX SWR_DMIC6", "DMIC7_OUTPUT", - "TX SWR_DMIC7", "DMIC8_OUTPUT"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi new file mode 100644 index 000000000000..b25df5a99161 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include "sc7280-herobrine-villager.dtsi" +#include "sc7280-herobrine-audio-wcd9385.dtsi" + +&lpass_va_macro { + vdd-micb-supply = <&pp1800_l2c>; +}; + +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "VA DMIC2", "vdd-micb", + "VA DMIC3", "vdd-micb", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi index 4566722bf4dd..38c8a3679fcb 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi @@ -33,7 +33,7 @@ ap_tp_i2c: &i2c0 { interrupts = <7 IRQ_TYPE_EDGE_FALLING>; hid-descr-addr = <0x20>; - vcc-supply = <&pp3300_z1>; + vdd-supply = <&pp3300_z1>; wakeup-source; }; @@ -55,6 +55,7 @@ ts_i2c: &i2c13 { reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; vcc33-supply = <&ts_avdd>; + vccio-supply = <&ts_avccio>; }; }; @@ -78,16 +79,6 @@ ts_i2c: &i2c13 { status = "okay"; }; -/* For nvme */ -&pcie1 { - status = "okay"; -}; - -/* For nvme */ -&pcie1_phy { - status = "okay"; -}; - &pwmleds { status = "okay"; }; @@ -321,6 +312,5 @@ ts_i2c: &i2c13 { "MOS_BLE_UART_TX", "MOS_BLE_UART_RX", "", - "", ""; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi new file mode 100644 index 000000000000..2febd6126d4c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Google Herobrine dts fragment for WIFI SKUs + * + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */ + +/delete-node/ &remoteproc_mpss; +/delete-node/ &rmtfs_mem; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts new file mode 100644 index 000000000000..c9fe64529555 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Zombie board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-zombie.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + model = "Google Zombie with LTE"; + compatible = "google,zombie-sku512", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme-lte.dts new file mode 100644 index 000000000000..e1fcacdccd51 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme-lte.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Zombie board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-zombie.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" +#include "sc7280-herobrine-nvme-sku.dtsi" + +/ { + model = "Google Zombie with LTE and NVMe"; + compatible = "google,zombie-sku514", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme.dts new file mode 100644 index 000000000000..e3d52c560363 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Zombie board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-zombie.dtsi" +#include "sc7280-herobrine-wifi-sku.dtsi" +#include "sc7280-herobrine-nvme-sku.dtsi" + +/ { + model = "Google Zombie with NVMe"; + compatible = "google,zombie-sku2","google,zombie-sku3","google,zombie-sku515", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts new file mode 100644 index 000000000000..0246c12b2f40 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Zombie board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-zombie.dtsi" +#include "sc7280-herobrine-wifi-sku.dtsi" + +/ { + model = "Google Zombie"; + compatible = "google,zombie", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi new file mode 100644 index 000000000000..a4fde22e3355 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Zombie board device tree source + * + * Copyright 2022 Google LLC. + */ + +#include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-audio-rt5682.dtsi" + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + clock-frequency = <400000>; + status = "okay"; + + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x01>; + vdd-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +&pm8350c_pwm_backlight { + /* Set the PWM period to 320 microseconds (3.125kHz frequency) */ + pwms = <&pm8350c_pwm 3 320000>; +}; + +&pwmleds { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "US_EURO_HS_SEL", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + ""; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index c11e37160f34..5b1c175c47f1 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -108,6 +108,24 @@ pinctrl-names = "default"; pinctrl-0 = <&en_pp3300_dx_edp>; + regulator-enable-ramp-delay = <3000>; + + /* + * eDP panel specs nearly always have a spec that says you + * shouldn't turn them off an on again without waiting 500ms. + * Add this as a board constraint since this rail is shared + * between the panel and touchscreen. + */ + off-on-delay-us = <500000>; + + /* + * Stat the regulator on. This has the advantage of starting + * the slow process of powering the panel on as soon as we + * probe the regulator. It also avoids tripping the + * off-on-delay immediately on every bootup. + */ + regulator-boot-on; + vin-supply = <&pp3300_z1>; }; @@ -307,7 +325,7 @@ pwmleds: pwmleds { compatible = "pwm-leds"; status = "disabled"; - keyboard_backlight: keyboard-backlight { + keyboard_backlight: led-0 { label = "cros_ec::kbd_backlight"; function = LED_FUNCTION_KBD_BACKLIGHT; pwms = <&cros_ec_pwm 0>; @@ -442,7 +460,11 @@ ap_i2c_tpm: &i2c14 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dp_hot_plug_det>; +}; + +&mdss_dp_out { data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; }; &mdss_mdp { @@ -503,13 +525,16 @@ ap_spi_fp: &spi9 { cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; cros_ec_fp: ec@0 { - compatible = "google,cros-ec-spi"; + compatible = "google,cros-ec-fp", "google,cros-ec-spi"; reg = <0>; interrupt-parent = <&tlmm>; interrupts = <61 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>; + boot0-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; spi-max-frequency = <3000000>; + vdd-supply = <&pp3300_fp_mcu>; }; }; @@ -627,6 +652,13 @@ ap_ec_spi: &spi10 { &usb_1_hsphy { status = "okay"; + + qcom,hs-rise-fall-time-bp = <0>; + qcom,squelch-detector-bp = <(-2090)>; + qcom,hs-disconnect-bp = <1743>; + qcom,hs-amplitude-bp = <1780>; + qcom,hs-crossover-voltage-microvolt = <(-31000)>; + qcom,hs-output-impedance-micro-ohms = <2600000>; }; &usb_1_qmpphy { @@ -639,24 +671,43 @@ ap_ec_spi: &spi10 { bias-disable; }; +&mi2s1_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_ws { + drive-strength = <6>; + bias-disable; +}; + &pcie1_clkreq_n { bias-pull-up; drive-strength = <2>; }; &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ drive-strength = <8>; }; &qspi_clk { - bias-disable; + bias-pull-down; /* No external pulls */ drive-strength = <8>; }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-pull-down; /* No external pulls */ + drive-strength = <8>; +}; + +&qspi_data1 { + bias-disable; /* External pulldown */ drive-strength = <8>; }; @@ -744,27 +795,27 @@ ap_ec_spi: &spi10 { pinctrl-names = "default"; pinctrl-0 = <&bios_flash_wp_od>; - amp_en: amp-en-pins { + amp_en: amp-en-state { pins = "gpio63"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ap_ec_int_l: ap-ec-int-l-pins { + ap_ec_int_l: ap-ec-int-l-state { pins = "gpio18"; function = "gpio"; bias-pull-up; }; - bios_flash_wp_od: bios-flash-wp-od-pins { + bios_flash_wp_od: bios-flash-wp-od-state { pins = "gpio16"; function = "gpio"; /* Has external pull */ bias-disable; }; - en_fp_rails: en-fp-rails-pins { + en_fp_rails: en-fp-rails-state { pins = "gpio77"; function = "gpio"; bias-disable; @@ -772,60 +823,60 @@ ap_ec_spi: &spi10 { output-high; }; - en_pp3300_codec: en-pp3300-codec-pins { + en_pp3300_codec: en-pp3300-codec-state { pins = "gpio105"; function = "gpio"; bias-disable; drive-strength = <2>; }; - en_pp3300_dx_edp: en-pp3300-dx-edp-pins { + en_pp3300_dx_edp: en-pp3300-dx-edp-state { pins = "gpio80"; function = "gpio"; bias-disable; drive-strength = <2>; }; - fp_rst_l: fp-rst-l-pins { + fp_rst_l: fp-rst-l-state { pins = "gpio78"; function = "gpio"; bias-disable; drive-strength = <2>; }; - fp_to_ap_irq_l: fp-to-ap-irq-l-pins { + fp_to_ap_irq_l: fp-to-ap-irq-l-state { pins = "gpio61"; function = "gpio"; /* Has external pullup */ bias-disable; }; - fpmcu_boot0: fpmcu-boot0-pins { + fpmcu_boot0: fpmcu-boot0-state { pins = "gpio68"; function = "gpio"; bias-disable; }; - gsc_ap_int_odl: gsc-ap-int-odl-pins { + gsc_ap_int_odl: gsc-ap-int-odl-state { pins = "gpio104"; function = "gpio"; bias-pull-up; }; - hp_irq: hp-irq-pins { + hp_irq: hp-irq-state { pins = "gpio101"; function = "gpio"; bias-pull-up; }; - hub_en: hub-en-pins { + hub_en: hub-en-state { pins = "gpio157"; function = "gpio"; bias-disable; drive-strength = <2>; }; - pe_wake_odl: pe-wake-odl-pins { + pe_wake_odl: pe-wake-odl-state { pins = "gpio3"; function = "gpio"; /* Has external pull */ @@ -834,45 +885,45 @@ ap_ec_spi: &spi10 { }; /* For ap_spi_fp */ - qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-pins { + qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-state { pins = "gpio39"; function = "gpio"; output-high; }; /* For ap_ec_spi */ - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins { + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state { pins = "gpio43"; function = "gpio"; output-high; }; - sar0_irq_odl: sar0-irq-odl-pins { + sar0_irq_odl: sar0-irq-odl-state { pins = "gpio141"; function = "gpio"; bias-pull-up; }; - sar1_irq_odl: sar1-irq-odl-pins { + sar1_irq_odl: sar1-irq-odl-state { pins = "gpio140"; function = "gpio"; bias-pull-up; }; - sd_cd_odl: sd-cd-odl-pins { + sd_cd_odl: sd-cd-odl-state { pins = "gpio91"; function = "gpio"; bias-pull-up; }; - ssd_en: ssd-en-pins { + ssd_en: ssd-en-state { pins = "gpio51"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ssd_rst_l: ssd-rst-l-pins { + ssd_rst_l: ssd-rst-l-state { pins = "gpio2"; function = "gpio"; bias-disable; @@ -880,14 +931,14 @@ ap_ec_spi: &spi10 { output-low; }; - tp_int_odl: tp-int-odl-pins { + tp_int_odl: tp-int-odl-state { pins = "gpio7"; function = "gpio"; /* Has external pullup */ bias-disable; }; - wf_cam_en: wf-cam-en-pins { + wf_cam_en: wf-cam-en-state { pins = "gpio119"; function = "gpio"; /* Has external pulldown */ diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi index 7f5143e9bb80..ebae545c587c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi @@ -79,27 +79,27 @@ ap_h1_spi: &spi14 { }; &tlmm { - ap_ec_int_l: ap-ec-int-l-pins { + ap_ec_int_l: ap-ec-int-l-state { pins = "gpio18"; function = "gpio"; - input-enable; bias-pull-up; }; - h1_ap_int_odl: h1-ap-int-odl-pins { + h1_ap_int_odl: h1-ap-int-odl-state { pins = "gpio104"; function = "gpio"; - input-enable; bias-pull-up; }; - qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-pins { + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state { pins = "gpio43"; + function = "gpio"; output-high; }; - qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-pins { + qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-state { pins = "gpio59"; + function = "gpio"; output-high; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 7559164cdda0..15222e92e3f5 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -10,7 +10,6 @@ #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> #include "sc7280-idp.dtsi" #include "pmr735a.dtsi" -#include "sc7280-herobrine-lte-sku.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform"; @@ -26,7 +25,7 @@ }; &apps_rsc { - pmr735a-regulators { + regulators-2 { compatible = "qcom,pmr735a-rpmh-regulators"; qcom,pmic-id = "e"; @@ -61,11 +60,6 @@ vddio-supply = <&vreg_l19b_1p8>; }; -&ipa { - status = "okay"; - modem-init; -}; - &pmk8350_rtc { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index cd432a2856a7..21027042cf13 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -13,11 +13,13 @@ #include "pmk8350.dtsi" #include "sc7280-chrome-common.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" / { aliases { bluetooth0 = &bluetooth; serial1 = &uart7; + wifi0 = &wifi; }; max98360a: audio-codec-0 { @@ -34,7 +36,7 @@ pinctrl-0 = <&wcd_reset_n>; pinctrl-1 = <&wcd_reset_n_sleep>; - reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>; qcom,rx-device = <&wcd_rx>; qcom,tx-device = <&wcd_tx>; @@ -68,7 +70,7 @@ gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_VOLUMEUP>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; linux,can-disable; }; @@ -111,12 +113,8 @@ "TX SWR_DMIC6", "DMIC7_OUTPUT", "TX SWR_DMIC7", "DMIC8_OUTPUT"; - qcom,msm-mbhc-hphl-swh = <1>; - qcom,msm-mbhc-gnd-swh = <1>; - #address-cells = <1>; #size-cells = <0>; - #sound-dai-cells = <0>; dai-link@0 { link-name = "MAX98360A"; @@ -186,7 +184,7 @@ }; &apps_rsc { - pm7325-regulators { + regulators-0 { compatible = "qcom,pm7325-rpmh-regulators"; qcom,pmic-id = "b"; @@ -281,7 +279,7 @@ }; }; - pm8350c-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -375,11 +373,6 @@ status = "okay"; }; -&ipa { - status = "okay"; - modem-init; -}; - &lpass_cpu { status = "okay"; @@ -487,7 +480,6 @@ wcd_rx: codec@0,4 { compatible = "sdw20217010d00"; reg = <0 4>; - #sound-dai-cells = <1>; qcom,rx-port-mapping = <1 2 3 4 5>; }; }; @@ -498,7 +490,6 @@ wcd_tx: codec@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; - #sound-dai-cells = <1>; qcom,tx-port-mapping = <1 2 3 4>; }; }; @@ -522,6 +513,12 @@ vdda-pll-supply = <&vreg_l10c_0p8>; vdda33-supply = <&vreg_l2b_3p0>; vdda18-supply = <&vreg_l1c_1p8>; + qcom,hs-rise-fall-time-bp = <0>; + qcom,squelch-detector-bp = <(-2090)>; + qcom,hs-disconnect-bp = <1743>; + qcom,hs-amplitude-bp = <1780>; + qcom,hs-crossover-voltage-microvolt = <(-31000)>; + qcom,hs-output-impedance-micro-ohms = <2600000>; }; &usb_1_qmpphy { @@ -569,10 +566,6 @@ bias-disable; }; -&lpass_dmic01_clk_sleep { - drive-strength = <2>; -}; - &lpass_dmic01_data { bias-pull-down; }; @@ -582,10 +575,6 @@ bias-disable; }; -&lpass_dmic23_clk_sleep { - drive-strength = <2>; -}; - &lpass_dmic23_data { bias-pull-down; }; @@ -596,30 +585,18 @@ bias-disable; }; -&lpass_rx_swr_clk_sleep { - bias-pull-down; -}; - &lpass_rx_swr_data { drive-strength = <2>; slew-rate = <1>; bias-bus-hold; }; -&lpass_rx_swr_data_sleep { - bias-pull-down; -}; - &lpass_tx_swr_clk { drive-strength = <2>; slew-rate = <1>; bias-disable; }; -&lpass_tx_swr_clk_sleep { - bias-pull-down; -}; - &lpass_tx_swr_data { drive-strength = <2>; slew-rate = <1>; @@ -657,16 +634,19 @@ }; &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ }; &qspi_clk { - bias-disable; + bias-pull-down; /* No external pulls or external pulldown */ }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-pull-down; /* No external pulls or external pulldown */ +}; + +&qspi_data1 { + bias-pull-down; /* No external pulls or external pulldown */ }; &qup_uart5_tx { @@ -747,24 +727,25 @@ }; &tlmm { - amp_en: amp-en { + amp_en: amp-en-state { pins = "gpio63"; + function = "gpio"; bias-pull-down; drive-strength = <2>; }; - bt_en: bt-en-pins { + bt_en: bt-en-state { pins = "gpio85"; function = "gpio"; output-low; bias-disable; }; - nvme_pwren: nvme-pwren-pins { + nvme_pwren: nvme-pwren-state { function = "gpio"; }; - pcie1_reset_n: pcie1-reset-n-pins { + pcie1_reset_n: pcie1-reset-n-state { pins = "gpio2"; function = "gpio"; @@ -773,7 +754,7 @@ bias-disable; }; - pcie1_wake_n: pcie1-wake-n-pins { + pcie1_wake_n: pcie1-wake-n-state { pins = "gpio3"; function = "gpio"; @@ -781,7 +762,7 @@ bias-pull-up; }; - qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { pins = "gpio28"; function = "gpio"; /* @@ -794,7 +775,7 @@ bias-bus-hold; }; - qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { pins = "gpio29"; function = "gpio"; /* @@ -806,7 +787,7 @@ bias-pull-down; }; - qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { pins = "gpio30"; function = "gpio"; /* @@ -816,7 +797,7 @@ bias-pull-up; }; - qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { pins = "gpio31"; function = "gpio"; /* @@ -827,25 +808,25 @@ bias-pull-up; }; - sd_cd: sd-cd-pins { + sd_cd: sd-cd-state { pins = "gpio91"; function = "gpio"; bias-pull-up; }; - sw_ctrl: sw-ctrl-pins { + sw_ctrl: sw-ctrl-state { pins = "gpio86"; function = "gpio"; bias-pull-down; }; - wcd_reset_n: wcd-reset-n { + wcd_reset_n: wcd-reset-n-state { pins = "gpio83"; function = "gpio"; drive-strength = <8>; }; - wcd_reset_n_sleep: wcd-reset-n-sleep { + wcd_reset_n_sleep: wcd-reset-n-sleep-state { pins = "gpio83"; function = "gpio"; drive-strength = <8>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 4b8c676b0bb1..9137db066d9e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -37,7 +37,7 @@ pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>; pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>; - reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>; us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; qcom,rx-device = <&wcd_rx>; @@ -87,7 +87,7 @@ * are left out of here since they are managed elsewhere. */ - pm7325-regulators { + regulators-0 { compatible = "qcom,pm7325-rpmh-regulators"; qcom,pmic-id = "b"; @@ -188,7 +188,7 @@ }; }; - pm8350c-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -230,9 +230,15 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + /* + * The initial design of this regulator was to use it as 3.3V, + * but due to later changes in design it was changed to 1.8V. + * The original name is kept due to same schematic. + */ + ts_avccio: vreg_l3c_3p0: ldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3540000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -336,11 +342,6 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ -&ipa { - status = "okay"; - modem-init; -}; - &lpass_va_macro { vdd-micb-supply = <&vreg_bob>; }; @@ -353,14 +354,9 @@ backlight = <&pm8350c_pwm_backlight>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - edp_panel_in: endpoint { - remote-endpoint = <&mdss_edp_out>; - }; + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_edp_out>; }; }; }; @@ -418,7 +414,6 @@ wcd_rx: codec@0,4 { compatible = "sdw20217010d00"; reg = <0 4>; - #sound-dai-cells = <1>; qcom,rx-port-mapping = <1 2 3 4 5>; }; }; @@ -427,7 +422,6 @@ wcd_tx: codec@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; - #sound-dai-cells = <1>; qcom,tx-port-mapping = <1 2 3 4>; }; }; @@ -595,7 +589,7 @@ mos_bt_uart: &uart7 { }; &tlmm { - mos_bt_en: mos-bt-en-pins { + mos_bt_en: mos-bt-en-state { pins = "gpio85"; function = "gpio"; drive-strength = <2>; @@ -603,7 +597,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { pins = "gpio28"; function = "gpio"; /* @@ -617,7 +611,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { pins = "gpio29"; function = "gpio"; /* @@ -630,7 +624,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { pins = "gpio31"; function = "gpio"; /* @@ -642,7 +636,7 @@ mos_bt_uart: &uart7 { }; /* For mos_bt_uart */ - qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { pins = "gpio30"; function = "gpio"; /* @@ -652,32 +646,32 @@ mos_bt_uart: &uart7 { bias-pull-up; }; - ts_int_conn: ts-int-conn-pins { + ts_int_conn: ts-int-conn-state { pins = "gpio55"; function = "gpio"; bias-pull-up; }; - ts_rst_conn: ts-rst-conn-pins { + ts_rst_conn: ts-rst-conn-state { pins = "gpio54"; function = "gpio"; drive-strength = <2>; }; - us_euro_hs_sel: us-euro-hs-sel { + us_euro_hs_sel: us-euro-hs-sel-state { pins = "gpio81"; function = "gpio"; bias-pull-down; drive-strength = <2>; }; - wcd_reset_n: wcd-reset-n { + wcd_reset_n: wcd-reset-n-state { pins = "gpio83"; function = "gpio"; drive-strength = <8>; }; - wcd_reset_n_sleep: wcd-reset-n-sleep { + wcd_reset_n_sleep: wcd-reset-n-sleep-state { pins = "gpio83"; function = "gpio"; drive-strength = <8>; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 212580316d3e..36f0bb9b3cbb 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -166,8 +166,9 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -180,17 +181,22 @@ #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; + cache-unified; }; }; }; CPU1: cpu@100 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -203,14 +209,17 @@ #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; CPU2: cpu@200 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -223,14 +232,17 @@ #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; CPU3: cpu@300 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -243,14 +255,17 @@ #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; CPU4: cpu@400 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -263,14 +278,17 @@ #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; CPU5: cpu@500 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -283,14 +301,17 @@ #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; CPU6: cpu@600 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -303,14 +324,17 @@ #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; CPU7: cpu@700 { device_type = "cpu"; - compatible = "arm,kryo"; + compatible = "qcom,kryo"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -323,6 +347,8 @@ #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -630,7 +656,7 @@ }; firmware { - scm { + scm: scm { compatible = "qcom,scm-sc7280", "qcom,scm"; }; }; @@ -752,6 +778,17 @@ interrupt-controller; #interrupt-cells = <2>; }; + + wlan_smp2p_out: wlan-ap-to-wpss { + qcom,entry-name = "wlan"; + #qcom,smem-state-cells = <1>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmu { @@ -915,12 +952,11 @@ opp-avg-kBps = <390000 0>; }; }; - }; gpi_dma0: dma-controller@900000 { #dma-cells = <3>; - compatible = "qcom,sc7280-gpi-dma"; + compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00900000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, @@ -967,6 +1003,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1025,6 +1063,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1083,6 +1123,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1141,6 +1183,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1199,6 +1243,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1257,6 +1303,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1315,6 +1363,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1373,6 +1423,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1419,7 +1471,7 @@ gpi_dma1: dma-controller@a00000 { #dma-cells = <3>; - compatible = "qcom,sc7280-gpi-dma"; + compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00a00000 0 0x60000>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, @@ -1466,6 +1518,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1524,6 +1578,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1582,6 +1638,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1640,6 +1698,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1698,6 +1758,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1756,6 +1818,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1814,6 +1878,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, <&gpi_dma1 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1872,6 +1938,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, <&gpi_dma1 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -2004,6 +2072,8 @@ qcom,rproc = <&remoteproc_wpss>; memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; status = "disabled"; + qcom,smem-states = <&wlan_smp2p_out 0>; + qcom,smem-state-names = "wlan-smp2p-out"; }; pcie1: pci@1c08000 { @@ -2023,7 +2093,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; @@ -2077,7 +2147,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie1_clkreq_n>; - iommus = <&apps_smmu 0x1c80 0x1>; + dma-coherent; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -2126,9 +2196,9 @@ iommus = <&apps_smmu 0x480 0x0>, <&apps_smmu 0x482 0x0>; - reg = <0 0x1e40000 0 0x8000>, - <0 0x1e50000 0 0x4ad0>, - <0 0x1e04000 0 0x23000>; + reg = <0 0x01e40000 0 0x8000>, + <0 0x01e50000 0 0x4ad0>, + <0 0x01e04000 0 0x23000>; reg-names = "ipa-reg", "ipa-shared", "gsi"; @@ -2285,7 +2355,6 @@ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>; qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>; qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>; - qcom,port-offset = <1>; #sound-dai-cells = <1>; #address-cells = <2>; @@ -2296,7 +2365,8 @@ lpass_audiocc: clock-controller@3300000 { compatible = "qcom,sc7280-lpassaudiocc"; - reg = <0 0x03300000 0 0x30000>; + reg = <0 0x03300000 0 0x30000>, + <0 0x032a9000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; @@ -2410,7 +2480,7 @@ lpass_hm: clock-controller@3c00000 { compatible = "qcom,sc7280-lpasshm"; - reg = <0 0x3c00000 0 0x28>; + reg = <0 0x03c00000 0 0x28>; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "bi_tcxo"; #clock-cells = <1>; @@ -2433,84 +2503,42 @@ #gpio-cells = <2>; gpio-ranges = <&lpass_tlmm 0 0 15>; - #clock-cells = <1>; - - lpass_dmic01_clk: dmic01-clk { + lpass_dmic01_clk: dmic01-clk-state { pins = "gpio6"; function = "dmic1_clk"; }; - lpass_dmic01_clk_sleep: dmic01-clk-sleep { - pins = "gpio6"; - function = "dmic1_clk"; - }; - - lpass_dmic01_data: dmic01-data { + lpass_dmic01_data: dmic01-data-state { pins = "gpio7"; function = "dmic1_data"; }; - lpass_dmic01_data_sleep: dmic01-data-sleep { - pins = "gpio7"; - function = "dmic1_data"; - }; - - lpass_dmic23_clk: dmic23-clk { + lpass_dmic23_clk: dmic23-clk-state { pins = "gpio8"; function = "dmic2_clk"; }; - lpass_dmic23_clk_sleep: dmic23-clk-sleep { - pins = "gpio8"; - function = "dmic2_clk"; - }; - - lpass_dmic23_data: dmic23-data { - pins = "gpio9"; - function = "dmic2_data"; - }; - - lpass_dmic23_data_sleep: dmic23-data-sleep { + lpass_dmic23_data: dmic23-data-state { pins = "gpio9"; function = "dmic2_data"; }; - lpass_rx_swr_clk: rx-swr-clk { - pins = "gpio3"; - function = "swr_rx_clk"; - }; - - lpass_rx_swr_clk_sleep: rx-swr-clk-sleep { + lpass_rx_swr_clk: rx-swr-clk-state { pins = "gpio3"; function = "swr_rx_clk"; }; - lpass_rx_swr_data: rx-swr-data { - pins = "gpio4", "gpio5"; - function = "swr_rx_data"; - }; - - lpass_rx_swr_data_sleep: rx-swr-data-sleep { + lpass_rx_swr_data: rx-swr-data-state { pins = "gpio4", "gpio5"; function = "swr_rx_data"; }; - lpass_tx_swr_clk: tx-swr-clk { + lpass_tx_swr_clk: tx-swr-clk-state { pins = "gpio0"; function = "swr_tx_clk"; }; - lpass_tx_swr_clk_sleep: tx-swr-clk-sleep { - pins = "gpio0"; - function = "swr_tx_clk"; - }; - - lpass_tx_swr_data: tx-swr-data { - pins = "gpio1", "gpio2", "gpio14"; - function = "swr_tx_data"; - }; - - lpass_tx_swr_data_sleep: tx-swr-data-sleep { + lpass_tx_swr_data: tx-swr-data-state { pins = "gpio1", "gpio2", "gpio14"; function = "swr_tx_data"; }; @@ -2658,8 +2686,15 @@ #power-domain-cells = <1>; }; + dma@117f000 { + compatible = "qcom,sc7280-dcc", "qcom,dcc"; + reg = <0x0 0x0117f000 0x0 0x1000>, + <0x0 0x01112000 0x0 0x6000>; + }; + adreno_smmu: iommu@3da0000 { - compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x03da0000 0 0x20000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -2708,12 +2743,8 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack"; - clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_MSS_OFFLINE_AXI_CLK>, - <&gcc GCC_MSS_SNOC_AXI_CLK>, - <&rpmhcc RPMH_PKA_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "offline", "snoc_axi", "pka", "xo"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; power-domains = <&rpmhpd SC7280_CX>, <&rpmhpd SC7280_MSS>; @@ -2726,14 +2757,6 @@ qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; - resets = <&aoss_reset AOSS_CC_MSS_RESTART>, - <&pdc_reset PDC_MODEM_SYNC_RESET>; - reset-names = "mss_restart", "pdc_reset"; - - qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>; - qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>; - qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>; - status = "disabled"; glink-edge { @@ -3283,7 +3306,6 @@ opp-avg-kBps = <200000 0>; }; }; - }; usb_1_hsphy: phy@88e3000 { @@ -3486,7 +3508,7 @@ pmu@9091000 { compatible = "qcom,sc7280-llcc-bwmon"; - reg = <0 0x9091000 0 0x1000>; + reg = <0 0x09091000 0 0x1000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -3525,7 +3547,7 @@ }; pmu@90b6400 { - compatible = "qcom,sc7280-cpu-bwmon", "qcom,msm8998-bwmon"; + compatible = "qcom,sc7280-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0 0x090b6400 0 0x600>; interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; @@ -3568,7 +3590,7 @@ }; gem_noc: interconnect@9100000 { - reg = <0 0x9100000 0 0xe2200>; + reg = <0 0x09100000 0 0xe2200>; compatible = "qcom,sc7280-gem-noc"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -3576,23 +3598,29 @@ system-cache-controller@9200000 { compatible = "qcom,sc7280-llcc"; - reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; eud: eud@88e0000 { compatible = "qcom,sc7280-eud","qcom,eud"; - reg = <0 0x88e0000 0 0x2000>, - <0 0x88e2000 0 0x1000>; + reg = <0 0x088e0000 0 0x2000>, + <0 0x088e2000 0 0x1000>; interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; eud_ep: endpoint { remote-endpoint = <&usb2_role_switch>; }; }; port@1 { + reg = <1>; eud_con: endpoint { remote-endpoint = <&con_eud>; }; @@ -3603,7 +3631,11 @@ eud_typec: connector { compatible = "usb-c-connector"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; con_eud: endpoint { remote-endpoint = <&eud_con>; }; @@ -3742,12 +3774,11 @@ required-opps = <&rpmhpd_opp_turbo>; }; }; - }; videocc: clock-controller@aaf0000 { compatible = "qcom,sc7280-videocc"; - reg = <0 0xaaf0000 0 0x10000>; + reg = <0 0x0aaf0000 0 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>; clock-names = "bi_tcxo", "bi_tcxo_ao"; @@ -3770,7 +3801,7 @@ dispcc: clock-controller@af00000 { compatible = "qcom,sc7280-dispcc"; - reg = <0 0xaf00000 0 0x20000>; + reg = <0 0x0af00000 0 0x20000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&mdss_dsi_phy 0>, @@ -3903,7 +3934,8 @@ }; mdss_dsi: dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sc7280-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; reg-names = "dsi_ctrl"; @@ -3923,11 +3955,13 @@ "iface", "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>; + operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SC7280_CX>; phys = <&mdss_dsi_phy>; - phy-names = "dsi"; #address-cells = <1>; #size-cells = <0>; @@ -3996,10 +4030,10 @@ pinctrl-names = "default"; pinctrl-0 = <&edp_hot_plug_det>; - reg = <0 0xaea0000 0 0x200>, - <0 0xaea0200 0 0x200>, - <0 0xaea0400 0 0xc00>, - <0 0xaea1000 0 0x400>; + reg = <0 0x0aea0000 0 0x200>, + <0 0x0aea0200 0 0x200>, + <0 0x0aea0400 0 0xc00>, + <0 0x0aea1000 0 0x400>; interrupt-parent = <&mdss>; interrupts = <14>; @@ -4071,10 +4105,10 @@ mdss_edp_phy: phy@aec2a00 { compatible = "qcom,sc7280-edp-phy"; - reg = <0 0xaec2a00 0 0x19c>, - <0 0xaec2200 0 0xa0>, - <0 0xaec2600 0 0xa0>, - <0 0xaec2000 0 0x1c0>; + reg = <0 0x0aec2a00 0 0x19c>, + <0 0x0aec2200 0 0xa0>, + <0 0x0aec2600 0 0xa0>, + <0 0x0aec2000 0 0x1c0>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_EDP_CLKREF_EN>; @@ -4090,11 +4124,11 @@ mdss_dp: displayport-controller@ae90000 { compatible = "qcom,sc7280-dp"; - reg = <0 0xae90000 0 0x200>, - <0 0xae90200 0 0x200>, - <0 0xae90400 0 0xc00>, - <0 0xae91000 0 0x400>, - <0 0xae91400 0 0x400>; + reg = <0 0x0ae90000 0 0x200>, + <0 0x0ae90200 0 0x200>, + <0 0x0ae90400 0 0xc00>, + <0 0x0ae91000 0 0x400>, + <0 0x0ae91400 0 0x400>; interrupt-parent = <&mdss>; interrupts = <12>; @@ -4135,7 +4169,7 @@ port@1 { reg = <1>; - dp_out: endpoint { }; + mdss_dp_out: endpoint { }; }; }; @@ -4212,7 +4246,7 @@ #reset-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP @@ -4241,8 +4275,8 @@ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; }; @@ -4258,791 +4292,796 @@ gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; - dp_hot_plug_det: dp-hot-plug-det-pins { + dp_hot_plug_det: dp-hot-plug-det-state { pins = "gpio47"; function = "dp_hot"; }; - edp_hot_plug_det: edp-hot-plug-det-pins { + edp_hot_plug_det: edp-hot-plug-det-state { pins = "gpio60"; function = "edp_hot"; }; - mi2s0_data0: mi2s0-data0-pins { + mi2s0_data0: mi2s0-data0-state { pins = "gpio98"; function = "mi2s0_data0"; }; - mi2s0_data1: mi2s0-data1-pins { + mi2s0_data1: mi2s0-data1-state { pins = "gpio99"; function = "mi2s0_data1"; }; - mi2s0_mclk: mi2s0-mclk-pins { + mi2s0_mclk: mi2s0-mclk-state { pins = "gpio96"; function = "pri_mi2s"; }; - mi2s0_sclk: mi2s0-sclk-pins { + mi2s0_sclk: mi2s0-sclk-state { pins = "gpio97"; function = "mi2s0_sck"; }; - mi2s0_ws: mi2s0-ws-pins { + mi2s0_ws: mi2s0-ws-state { pins = "gpio100"; function = "mi2s0_ws"; }; - mi2s1_data0: mi2s1-data0-pins { + mi2s1_data0: mi2s1-data0-state { pins = "gpio107"; function = "mi2s1_data0"; }; - mi2s1_sclk: mi2s1-sclk-pins { + mi2s1_sclk: mi2s1-sclk-state { pins = "gpio106"; function = "mi2s1_sck"; }; - mi2s1_ws: mi2s1-ws-pins { + mi2s1_ws: mi2s1-ws-state { pins = "gpio108"; function = "mi2s1_ws"; }; - pcie1_clkreq_n: pcie1-clkreq-n-pins { + pcie1_clkreq_n: pcie1-clkreq-n-state { pins = "gpio79"; function = "pcie1_clkreqn"; }; - qspi_clk: qspi-clk-pins { + qspi_clk: qspi-clk-state { pins = "gpio14"; function = "qspi_clk"; }; - qspi_cs0: qspi-cs0-pins { + qspi_cs0: qspi-cs0-state { pins = "gpio15"; function = "qspi_cs"; }; - qspi_cs1: qspi-cs1-pins { + qspi_cs1: qspi-cs1-state { pins = "gpio19"; function = "qspi_cs"; }; - qspi_data01: qspi-data01-pins { - pins = "gpio12", "gpio13"; + qspi_data0: qspi-data0-state { + pins = "gpio12"; + function = "qspi_data"; + }; + + qspi_data1: qspi-data1-state { + pins = "gpio13"; function = "qspi_data"; }; - qspi_data12: qspi-data12-pins { + qspi_data23: qspi-data23-state { pins = "gpio16", "gpio17"; function = "qspi_data"; }; - qup_i2c0_data_clk: qup-i2c0-data-clk-pins { + qup_i2c0_data_clk: qup-i2c0-data-clk-state { pins = "gpio0", "gpio1"; function = "qup00"; }; - qup_i2c1_data_clk: qup-i2c1-data-clk-pins { + qup_i2c1_data_clk: qup-i2c1-data-clk-state { pins = "gpio4", "gpio5"; function = "qup01"; }; - qup_i2c2_data_clk: qup-i2c2-data-clk-pins { + qup_i2c2_data_clk: qup-i2c2-data-clk-state { pins = "gpio8", "gpio9"; function = "qup02"; }; - qup_i2c3_data_clk: qup-i2c3-data-clk-pins { + qup_i2c3_data_clk: qup-i2c3-data-clk-state { pins = "gpio12", "gpio13"; function = "qup03"; }; - qup_i2c4_data_clk: qup-i2c4-data-clk-pins { + qup_i2c4_data_clk: qup-i2c4-data-clk-state { pins = "gpio16", "gpio17"; function = "qup04"; }; - qup_i2c5_data_clk: qup-i2c5-data-clk-pins { + qup_i2c5_data_clk: qup-i2c5-data-clk-state { pins = "gpio20", "gpio21"; function = "qup05"; }; - qup_i2c6_data_clk: qup-i2c6-data-clk-pins { + qup_i2c6_data_clk: qup-i2c6-data-clk-state { pins = "gpio24", "gpio25"; function = "qup06"; }; - qup_i2c7_data_clk: qup-i2c7-data-clk-pins { + qup_i2c7_data_clk: qup-i2c7-data-clk-state { pins = "gpio28", "gpio29"; function = "qup07"; }; - qup_i2c8_data_clk: qup-i2c8-data-clk-pins { + qup_i2c8_data_clk: qup-i2c8-data-clk-state { pins = "gpio32", "gpio33"; function = "qup10"; }; - qup_i2c9_data_clk: qup-i2c9-data-clk-pins { + qup_i2c9_data_clk: qup-i2c9-data-clk-state { pins = "gpio36", "gpio37"; function = "qup11"; }; - qup_i2c10_data_clk: qup-i2c10-data-clk-pins { + qup_i2c10_data_clk: qup-i2c10-data-clk-state { pins = "gpio40", "gpio41"; function = "qup12"; }; - qup_i2c11_data_clk: qup-i2c11-data-clk-pins { + qup_i2c11_data_clk: qup-i2c11-data-clk-state { pins = "gpio44", "gpio45"; function = "qup13"; }; - qup_i2c12_data_clk: qup-i2c12-data-clk-pins { + qup_i2c12_data_clk: qup-i2c12-data-clk-state { pins = "gpio48", "gpio49"; function = "qup14"; }; - qup_i2c13_data_clk: qup-i2c13-data-clk-pins { + qup_i2c13_data_clk: qup-i2c13-data-clk-state { pins = "gpio52", "gpio53"; function = "qup15"; }; - qup_i2c14_data_clk: qup-i2c14-data-clk-pins { + qup_i2c14_data_clk: qup-i2c14-data-clk-state { pins = "gpio56", "gpio57"; function = "qup16"; }; - qup_i2c15_data_clk: qup-i2c15-data-clk-pins { + qup_i2c15_data_clk: qup-i2c15-data-clk-state { pins = "gpio60", "gpio61"; function = "qup17"; }; - qup_spi0_data_clk: qup-spi0-data-clk-pins { + qup_spi0_data_clk: qup-spi0-data-clk-state { pins = "gpio0", "gpio1", "gpio2"; function = "qup00"; }; - qup_spi0_cs: qup-spi0-cs-pins { + qup_spi0_cs: qup-spi0-cs-state { pins = "gpio3"; function = "qup00"; }; - qup_spi0_cs_gpio: qup-spi0-cs-gpio-pins { + qup_spi0_cs_gpio: qup-spi0-cs-gpio-state { pins = "gpio3"; function = "gpio"; }; - qup_spi1_data_clk: qup-spi1-data-clk-pins { + qup_spi1_data_clk: qup-spi1-data-clk-state { pins = "gpio4", "gpio5", "gpio6"; function = "qup01"; }; - qup_spi1_cs: qup-spi1-cs-pins { + qup_spi1_cs: qup-spi1-cs-state { pins = "gpio7"; function = "qup01"; }; - qup_spi1_cs_gpio: qup-spi1-cs-gpio-pins { + qup_spi1_cs_gpio: qup-spi1-cs-gpio-state { pins = "gpio7"; function = "gpio"; }; - qup_spi2_data_clk: qup-spi2-data-clk-pins { + qup_spi2_data_clk: qup-spi2-data-clk-state { pins = "gpio8", "gpio9", "gpio10"; function = "qup02"; }; - qup_spi2_cs: qup-spi2-cs-pins { + qup_spi2_cs: qup-spi2-cs-state { pins = "gpio11"; function = "qup02"; }; - qup_spi2_cs_gpio: qup-spi2-cs-gpio-pins { + qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { pins = "gpio11"; function = "gpio"; }; - qup_spi3_data_clk: qup-spi3-data-clk-pins { + qup_spi3_data_clk: qup-spi3-data-clk-state { pins = "gpio12", "gpio13", "gpio14"; function = "qup03"; }; - qup_spi3_cs: qup-spi3-cs-pins { + qup_spi3_cs: qup-spi3-cs-state { pins = "gpio15"; function = "qup03"; }; - qup_spi3_cs_gpio: qup-spi3-cs-gpio-pins { + qup_spi3_cs_gpio: qup-spi3-cs-gpio-state { pins = "gpio15"; function = "gpio"; }; - qup_spi4_data_clk: qup-spi4-data-clk-pins { + qup_spi4_data_clk: qup-spi4-data-clk-state { pins = "gpio16", "gpio17", "gpio18"; function = "qup04"; }; - qup_spi4_cs: qup-spi4-cs-pins { + qup_spi4_cs: qup-spi4-cs-state { pins = "gpio19"; function = "qup04"; }; - qup_spi4_cs_gpio: qup-spi4-cs-gpio-pins { + qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { pins = "gpio19"; function = "gpio"; }; - qup_spi5_data_clk: qup-spi5-data-clk-pins { + qup_spi5_data_clk: qup-spi5-data-clk-state { pins = "gpio20", "gpio21", "gpio22"; function = "qup05"; }; - qup_spi5_cs: qup-spi5-cs-pins { + qup_spi5_cs: qup-spi5-cs-state { pins = "gpio23"; function = "qup05"; }; - qup_spi5_cs_gpio: qup-spi5-cs-gpio-pins { + qup_spi5_cs_gpio: qup-spi5-cs-gpio-state { pins = "gpio23"; function = "gpio"; }; - qup_spi6_data_clk: qup-spi6-data-clk-pins { + qup_spi6_data_clk: qup-spi6-data-clk-state { pins = "gpio24", "gpio25", "gpio26"; function = "qup06"; }; - qup_spi6_cs: qup-spi6-cs-pins { + qup_spi6_cs: qup-spi6-cs-state { pins = "gpio27"; function = "qup06"; }; - qup_spi6_cs_gpio: qup-spi6-cs-gpio-pins { + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { pins = "gpio27"; function = "gpio"; }; - qup_spi7_data_clk: qup-spi7-data-clk-pins { + qup_spi7_data_clk: qup-spi7-data-clk-state { pins = "gpio28", "gpio29", "gpio30"; function = "qup07"; }; - qup_spi7_cs: qup-spi7-cs-pins { + qup_spi7_cs: qup-spi7-cs-state { pins = "gpio31"; function = "qup07"; }; - qup_spi7_cs_gpio: qup-spi7-cs-gpio-pins { + qup_spi7_cs_gpio: qup-spi7-cs-gpio-state { pins = "gpio31"; function = "gpio"; }; - qup_spi8_data_clk: qup-spi8-data-clk-pins { + qup_spi8_data_clk: qup-spi8-data-clk-state { pins = "gpio32", "gpio33", "gpio34"; function = "qup10"; }; - qup_spi8_cs: qup-spi8-cs-pins { + qup_spi8_cs: qup-spi8-cs-state { pins = "gpio35"; function = "qup10"; }; - qup_spi8_cs_gpio: qup-spi8-cs-gpio-pins { + qup_spi8_cs_gpio: qup-spi8-cs-gpio-state { pins = "gpio35"; function = "gpio"; }; - qup_spi9_data_clk: qup-spi9-data-clk-pins { + qup_spi9_data_clk: qup-spi9-data-clk-state { pins = "gpio36", "gpio37", "gpio38"; function = "qup11"; }; - qup_spi9_cs: qup-spi9-cs-pins { + qup_spi9_cs: qup-spi9-cs-state { pins = "gpio39"; function = "qup11"; }; - qup_spi9_cs_gpio: qup-spi9-cs-gpio-pins { + qup_spi9_cs_gpio: qup-spi9-cs-gpio-state { pins = "gpio39"; function = "gpio"; }; - qup_spi10_data_clk: qup-spi10-data-clk-pins { + qup_spi10_data_clk: qup-spi10-data-clk-state { pins = "gpio40", "gpio41", "gpio42"; function = "qup12"; }; - qup_spi10_cs: qup-spi10-cs-pins { + qup_spi10_cs: qup-spi10-cs-state { pins = "gpio43"; function = "qup12"; }; - qup_spi10_cs_gpio: qup-spi10-cs-gpio-pins { + qup_spi10_cs_gpio: qup-spi10-cs-gpio-state { pins = "gpio43"; function = "gpio"; }; - qup_spi11_data_clk: qup-spi11-data-clk-pins { + qup_spi11_data_clk: qup-spi11-data-clk-state { pins = "gpio44", "gpio45", "gpio46"; function = "qup13"; }; - qup_spi11_cs: qup-spi11-cs-pins { + qup_spi11_cs: qup-spi11-cs-state { pins = "gpio47"; function = "qup13"; }; - qup_spi11_cs_gpio: qup-spi11-cs-gpio-pins { + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { pins = "gpio47"; function = "gpio"; }; - qup_spi12_data_clk: qup-spi12-data-clk-pins { + qup_spi12_data_clk: qup-spi12-data-clk-state { pins = "gpio48", "gpio49", "gpio50"; function = "qup14"; }; - qup_spi12_cs: qup-spi12-cs-pins { + qup_spi12_cs: qup-spi12-cs-state { pins = "gpio51"; function = "qup14"; }; - qup_spi12_cs_gpio: qup-spi12-cs-gpio-pins { + qup_spi12_cs_gpio: qup-spi12-cs-gpio-state { pins = "gpio51"; function = "gpio"; }; - qup_spi13_data_clk: qup-spi13-data-clk-pins { + qup_spi13_data_clk: qup-spi13-data-clk-state { pins = "gpio52", "gpio53", "gpio54"; function = "qup15"; }; - qup_spi13_cs: qup-spi13-cs-pins { + qup_spi13_cs: qup-spi13-cs-state { pins = "gpio55"; function = "qup15"; }; - qup_spi13_cs_gpio: qup-spi13-cs-gpio-pins { + qup_spi13_cs_gpio: qup-spi13-cs-gpio-state { pins = "gpio55"; function = "gpio"; }; - qup_spi14_data_clk: qup-spi14-data-clk-pins { + qup_spi14_data_clk: qup-spi14-data-clk-state { pins = "gpio56", "gpio57", "gpio58"; function = "qup16"; }; - qup_spi14_cs: qup-spi14-cs-pins { + qup_spi14_cs: qup-spi14-cs-state { pins = "gpio59"; function = "qup16"; }; - qup_spi14_cs_gpio: qup-spi14-cs-gpio-pins { + qup_spi14_cs_gpio: qup-spi14-cs-gpio-state { pins = "gpio59"; function = "gpio"; }; - qup_spi15_data_clk: qup-spi15-data-clk-pins { + qup_spi15_data_clk: qup-spi15-data-clk-state { pins = "gpio60", "gpio61", "gpio62"; function = "qup17"; }; - qup_spi15_cs: qup-spi15-cs-pins { + qup_spi15_cs: qup-spi15-cs-state { pins = "gpio63"; function = "qup17"; }; - qup_spi15_cs_gpio: qup-spi15-cs-gpio-pins { + qup_spi15_cs_gpio: qup-spi15-cs-gpio-state { pins = "gpio63"; function = "gpio"; }; - qup_uart0_cts: qup-uart0-cts-pins { + qup_uart0_cts: qup-uart0-cts-state { pins = "gpio0"; function = "qup00"; }; - qup_uart0_rts: qup-uart0-rts-pins { + qup_uart0_rts: qup-uart0-rts-state { pins = "gpio1"; function = "qup00"; }; - qup_uart0_tx: qup-uart0-tx-pins { + qup_uart0_tx: qup-uart0-tx-state { pins = "gpio2"; function = "qup00"; }; - qup_uart0_rx: qup-uart0-rx-pins { + qup_uart0_rx: qup-uart0-rx-state { pins = "gpio3"; function = "qup00"; }; - qup_uart1_cts: qup-uart1-cts-pins { + qup_uart1_cts: qup-uart1-cts-state { pins = "gpio4"; function = "qup01"; }; - qup_uart1_rts: qup-uart1-rts-pins { + qup_uart1_rts: qup-uart1-rts-state { pins = "gpio5"; function = "qup01"; }; - qup_uart1_tx: qup-uart1-tx-pins { + qup_uart1_tx: qup-uart1-tx-state { pins = "gpio6"; function = "qup01"; }; - qup_uart1_rx: qup-uart1-rx-pins { + qup_uart1_rx: qup-uart1-rx-state { pins = "gpio7"; function = "qup01"; }; - qup_uart2_cts: qup-uart2-cts-pins { + qup_uart2_cts: qup-uart2-cts-state { pins = "gpio8"; function = "qup02"; }; - qup_uart2_rts: qup-uart2-rts-pins { + qup_uart2_rts: qup-uart2-rts-state { pins = "gpio9"; function = "qup02"; }; - qup_uart2_tx: qup-uart2-tx-pins { + qup_uart2_tx: qup-uart2-tx-state { pins = "gpio10"; function = "qup02"; }; - qup_uart2_rx: qup-uart2-rx-pins { + qup_uart2_rx: qup-uart2-rx-state { pins = "gpio11"; function = "qup02"; }; - qup_uart3_cts: qup-uart3-cts-pins { + qup_uart3_cts: qup-uart3-cts-state { pins = "gpio12"; function = "qup03"; }; - qup_uart3_rts: qup-uart3-rts-pins { + qup_uart3_rts: qup-uart3-rts-state { pins = "gpio13"; function = "qup03"; }; - qup_uart3_tx: qup-uart3-tx-pins { + qup_uart3_tx: qup-uart3-tx-state { pins = "gpio14"; function = "qup03"; }; - qup_uart3_rx: qup-uart3-rx-pins { + qup_uart3_rx: qup-uart3-rx-state { pins = "gpio15"; function = "qup03"; }; - qup_uart4_cts: qup-uart4-cts-pins { + qup_uart4_cts: qup-uart4-cts-state { pins = "gpio16"; function = "qup04"; }; - qup_uart4_rts: qup-uart4-rts-pins { + qup_uart4_rts: qup-uart4-rts-state { pins = "gpio17"; function = "qup04"; }; - qup_uart4_tx: qup-uart4-tx-pins { + qup_uart4_tx: qup-uart4-tx-state { pins = "gpio18"; function = "qup04"; }; - qup_uart4_rx: qup-uart4-rx-pins { + qup_uart4_rx: qup-uart4-rx-state { pins = "gpio19"; function = "qup04"; }; - qup_uart5_cts: qup-uart5-cts-pins { + qup_uart5_cts: qup-uart5-cts-state { pins = "gpio20"; function = "qup05"; }; - qup_uart5_rts: qup-uart5-rts-pins { + qup_uart5_rts: qup-uart5-rts-state { pins = "gpio21"; function = "qup05"; }; - qup_uart5_tx: qup-uart5-tx-pins { + qup_uart5_tx: qup-uart5-tx-state { pins = "gpio22"; function = "qup05"; }; - qup_uart5_rx: qup-uart5-rx-pins { + qup_uart5_rx: qup-uart5-rx-state { pins = "gpio23"; function = "qup05"; }; - qup_uart6_cts: qup-uart6-cts-pins { + qup_uart6_cts: qup-uart6-cts-state { pins = "gpio24"; function = "qup06"; }; - qup_uart6_rts: qup-uart6-rts-pins { + qup_uart6_rts: qup-uart6-rts-state { pins = "gpio25"; function = "qup06"; }; - qup_uart6_tx: qup-uart6-tx-pins { + qup_uart6_tx: qup-uart6-tx-state { pins = "gpio26"; function = "qup06"; }; - qup_uart6_rx: qup-uart6-rx-pins { + qup_uart6_rx: qup-uart6-rx-state { pins = "gpio27"; function = "qup06"; }; - qup_uart7_cts: qup-uart7-cts-pins { + qup_uart7_cts: qup-uart7-cts-state { pins = "gpio28"; function = "qup07"; }; - qup_uart7_rts: qup-uart7-rts-pins { + qup_uart7_rts: qup-uart7-rts-state { pins = "gpio29"; function = "qup07"; }; - qup_uart7_tx: qup-uart7-tx-pins { + qup_uart7_tx: qup-uart7-tx-state { pins = "gpio30"; function = "qup07"; }; - qup_uart7_rx: qup-uart7-rx-pins { + qup_uart7_rx: qup-uart7-rx-state { pins = "gpio31"; function = "qup07"; }; - qup_uart8_cts: qup-uart8-cts-pins { + qup_uart8_cts: qup-uart8-cts-state { pins = "gpio32"; function = "qup10"; }; - qup_uart8_rts: qup-uart8-rts-pins { + qup_uart8_rts: qup-uart8-rts-state { pins = "gpio33"; function = "qup10"; }; - qup_uart8_tx: qup-uart8-tx-pins { + qup_uart8_tx: qup-uart8-tx-state { pins = "gpio34"; function = "qup10"; }; - qup_uart8_rx: qup-uart8-rx-pins { + qup_uart8_rx: qup-uart8-rx-state { pins = "gpio35"; function = "qup10"; }; - qup_uart9_cts: qup-uart9-cts-pins { + qup_uart9_cts: qup-uart9-cts-state { pins = "gpio36"; function = "qup11"; }; - qup_uart9_rts: qup-uart9-rts-pins { + qup_uart9_rts: qup-uart9-rts-state { pins = "gpio37"; function = "qup11"; }; - qup_uart9_tx: qup-uart9-tx-pins { + qup_uart9_tx: qup-uart9-tx-state { pins = "gpio38"; function = "qup11"; }; - qup_uart9_rx: qup-uart9-rx-pins { + qup_uart9_rx: qup-uart9-rx-state { pins = "gpio39"; function = "qup11"; }; - qup_uart10_cts: qup-uart10-cts-pins { + qup_uart10_cts: qup-uart10-cts-state { pins = "gpio40"; function = "qup12"; }; - qup_uart10_rts: qup-uart10-rts-pins { + qup_uart10_rts: qup-uart10-rts-state { pins = "gpio41"; function = "qup12"; }; - qup_uart10_tx: qup-uart10-tx-pins { + qup_uart10_tx: qup-uart10-tx-state { pins = "gpio42"; function = "qup12"; }; - qup_uart10_rx: qup-uart10-rx-pins { + qup_uart10_rx: qup-uart10-rx-state { pins = "gpio43"; function = "qup12"; }; - qup_uart11_cts: qup-uart11-cts-pins { + qup_uart11_cts: qup-uart11-cts-state { pins = "gpio44"; function = "qup13"; }; - qup_uart11_rts: qup-uart11-rts-pins { + qup_uart11_rts: qup-uart11-rts-state { pins = "gpio45"; function = "qup13"; }; - qup_uart11_tx: qup-uart11-tx-pins { + qup_uart11_tx: qup-uart11-tx-state { pins = "gpio46"; function = "qup13"; }; - qup_uart11_rx: qup-uart11-rx-pins { + qup_uart11_rx: qup-uart11-rx-state { pins = "gpio47"; function = "qup13"; }; - qup_uart12_cts: qup-uart12-cts-pins { + qup_uart12_cts: qup-uart12-cts-state { pins = "gpio48"; function = "qup14"; }; - qup_uart12_rts: qup-uart12-rts-pins { + qup_uart12_rts: qup-uart12-rts-state { pins = "gpio49"; function = "qup14"; }; - qup_uart12_tx: qup-uart12-tx-pins { + qup_uart12_tx: qup-uart12-tx-state { pins = "gpio50"; function = "qup14"; }; - qup_uart12_rx: qup-uart12-rx-pins { + qup_uart12_rx: qup-uart12-rx-state { pins = "gpio51"; function = "qup14"; }; - qup_uart13_cts: qup-uart13-cts-pins { + qup_uart13_cts: qup-uart13-cts-state { pins = "gpio52"; function = "qup15"; }; - qup_uart13_rts: qup-uart13-rts-pins { + qup_uart13_rts: qup-uart13-rts-state { pins = "gpio53"; function = "qup15"; }; - qup_uart13_tx: qup-uart13-tx-pins { + qup_uart13_tx: qup-uart13-tx-state { pins = "gpio54"; function = "qup15"; }; - qup_uart13_rx: qup-uart13-rx-pins { + qup_uart13_rx: qup-uart13-rx-state { pins = "gpio55"; function = "qup15"; }; - qup_uart14_cts: qup-uart14-cts-pins { + qup_uart14_cts: qup-uart14-cts-state { pins = "gpio56"; function = "qup16"; }; - qup_uart14_rts: qup-uart14-rts-pins { + qup_uart14_rts: qup-uart14-rts-state { pins = "gpio57"; function = "qup16"; }; - qup_uart14_tx: qup-uart14-tx-pins { + qup_uart14_tx: qup-uart14-tx-state { pins = "gpio58"; function = "qup16"; }; - qup_uart14_rx: qup-uart14-rx-pins { + qup_uart14_rx: qup-uart14-rx-state { pins = "gpio59"; function = "qup16"; }; - qup_uart15_cts: qup-uart15-cts-pins { + qup_uart15_cts: qup-uart15-cts-state { pins = "gpio60"; function = "qup17"; }; - qup_uart15_rts: qup-uart15-rts-pins { + qup_uart15_rts: qup-uart15-rts-state { pins = "gpio61"; function = "qup17"; }; - qup_uart15_tx: qup-uart15-tx-pins { + qup_uart15_tx: qup-uart15-tx-state { pins = "gpio62"; function = "qup17"; }; - qup_uart15_rx: qup-uart15-rx-pins { + qup_uart15_rx: qup-uart15-rx-state { pins = "gpio63"; function = "qup17"; }; - sdc1_clk: sdc1-clk-pins { + sdc1_clk: sdc1-clk-state { pins = "sdc1_clk"; }; - sdc1_cmd: sdc1-cmd-pins { + sdc1_cmd: sdc1-cmd-state { pins = "sdc1_cmd"; }; - sdc1_data: sdc1-data-pins { + sdc1_data: sdc1-data-state { pins = "sdc1_data"; }; - sdc1_rclk: sdc1-rclk-pins { + sdc1_rclk: sdc1-rclk-state { pins = "sdc1_rclk"; }; - sdc1_clk_sleep: sdc1-clk-sleep-pins { + sdc1_clk_sleep: sdc1-clk-sleep-state { pins = "sdc1_clk"; drive-strength = <2>; bias-bus-hold; }; - sdc1_cmd_sleep: sdc1-cmd-sleep-pins { + sdc1_cmd_sleep: sdc1-cmd-sleep-state { pins = "sdc1_cmd"; drive-strength = <2>; bias-bus-hold; }; - sdc1_data_sleep: sdc1-data-sleep-pins { + sdc1_data_sleep: sdc1-data-sleep-state { pins = "sdc1_data"; drive-strength = <2>; bias-bus-hold; }; - sdc1_rclk_sleep: sdc1-rclk-sleep-pins { + sdc1_rclk_sleep: sdc1-rclk-sleep-state { pins = "sdc1_rclk"; drive-strength = <2>; bias-bus-hold; }; - sdc2_clk: sdc2-clk-pins { + sdc2_clk: sdc2-clk-state { pins = "sdc2_clk"; }; - sdc2_cmd: sdc2-cmd-pins { + sdc2_cmd: sdc2-cmd-state { pins = "sdc2_cmd"; }; - sdc2_data: sdc2-data-pins { + sdc2_data: sdc2-data-state { pins = "sdc2_data"; }; - sdc2_clk_sleep: sdc2-clk-sleep-pins { + sdc2_clk_sleep: sdc2-clk-sleep-state { pins = "sdc2_clk"; drive-strength = <2>; bias-bus-hold; }; - sdc2_cmd_sleep: sdc2-cmd-sleep-pins { + sdc2_cmd_sleep: sdc2-cmd-sleep-state { pins = "sdc2_cmd"; drive-strength = <2>; bias-bus-hold; }; - sdc2_data_sleep: sdc2-data-sleep-pins { + sdc2_data_sleep: sdc2-data-sleep-state { pins = "sdc2_data"; drive-strength = <2>; bias-bus-hold; @@ -5155,20 +5194,20 @@ intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - #interrupt-cells = <3>; - interrupt-controller; reg = <0 0x17a00000 0 0x10000>, /* GICD */ <0 0x17a60000 0 0x100000>; /* GICR * 8 */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <3>; + interrupt-controller; + #address-cells = <2>; + #size-cells = <2>; + ranges; - gic-its@17a40000 { + msi-controller@17a40000 { compatible = "arm,gic-v3-its"; + reg = <0 0x17a40000 0 0x20000>; msi-controller; #msi-cells = <1>; - reg = <0 0x17a40000 0 0x20000>; status = "disabled"; }; }; @@ -5313,7 +5352,7 @@ }; epss_l3: interconnect@18590000 { - compatible = "qcom,sc7280-epss-l3"; + compatible = "qcom,sc7280-epss-l3", "qcom,epss-l3"; reg = <0 0x18590000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; clock-names = "xo", "alternate"; @@ -5321,13 +5360,14 @@ }; cpufreq_hw: cpufreq@18591000 { - compatible = "qcom,cpufreq-epss"; + compatible = "qcom,sc7280-cpufreq-epss", "qcom,cpufreq-epss"; reg = <0 0x18591000 0 0x1000>, <0 0x18592000 0 0x1000>, <0 0x18593000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index fea7d8273ccd..5b25d54b9591 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -17,10 +17,12 @@ compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp"; aliases { - serial0 = &qup2_uart17; + i2c4 = &i2c4; + i2c21 = &i2c21; + serial0 = &uart17; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pmc8280c_lpg 3 1000000>; enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; @@ -34,10 +36,104 @@ stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_con0_hs: endpoint { + remote-endpoint = <&usb_0_role_switch>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_con0_ss: endpoint { + remote-endpoint = <&mdss0_dp0_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con0_sbu: endpoint { + remote-endpoint = <&usb0_sbu_mux>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + pmic_glink_con1_hs: endpoint { + remote-endpoint = <&usb_1_role_switch>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_con1_ss: endpoint { + remote-endpoint = <&mdss0_dp1_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con1_sbu: endpoint { + remote-endpoint = <&usb1_sbu_mux>; + }; + }; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_reg_en>; + + regulator-boot-on; + }; + vreg_edp_bl: regulator-edp-bl { compatible = "regulator-fixed"; - regulator-name = "VREG_EDP_BL"; + regulator-name = "VBL9"; regulator-min-microvolt = <3600000>; regulator-max-microvolt = <3600000>; @@ -50,10 +146,24 @@ regulator-boot-on; }; + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VCC3_SSD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&nvme_reg_en>; + }; + vreg_misc_3p3: regulator-misc-3p3 { compatible = "regulator-fixed"; - regulator-name = "VREG_MISC_3P3"; + regulator-name = "VCC3B"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -66,10 +176,91 @@ regulator-boot-on; regulator-always-on; }; + + vreg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "VCC_WLAN_3R9"; + regulator-min-microvolt = <3900000>; + regulator-max-microvolt = <3900000>; + + gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&hastings_reg_en>; + + regulator-boot-on; + }; + + vreg_wwan: regulator-wwan { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B_WAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wwan_sw_en>; + + regulator-boot-on; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + usb0-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb0_sbu_default>; + + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + port { + usb0_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con0_sbu>; + }; + }; + }; + + usb1-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb1_sbu_default>; + + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + port { + usb1_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con1_sbu>; + }; + }; + }; }; &apps_rsc { - pmc8280-1-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -88,7 +279,6 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-boot-on; - regulator-always-on; }; vreg_l4b: ldo4 { @@ -107,7 +297,7 @@ }; }; - pmc8280c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -124,6 +314,8 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l13c: ldo13 { @@ -134,7 +326,7 @@ }; }; - pmc8280-2-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "d"; @@ -146,6 +338,8 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l4d: ldo4 { @@ -178,23 +372,77 @@ }; }; -&pmc8280c_lpg { +&dispcc0 { status = "okay"; }; -&pmk8280_pon_pwrkey { +&mdss0 { status = "okay"; }; -&qup0 { +&mdss0_dp0 { status = "okay"; }; -&qup0_i2c4 { +&mdss0_dp0_out { + data-lanes = <0 1>; + remote-endpoint = <&pmic_glink_con0_ss>; +}; + +&mdss0_dp1 { + status = "okay"; +}; + +&mdss0_dp1_out { + data-lanes = <0 1>; + remote-endpoint = <&pmic_glink_con1_ss>; +}; + +&mdss0_dp3 { + compatible = "qcom,sc8280xp-edp"; + /delete-property/ #sound-dai-cells; + + data-lanes = <0 1 2 3>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + backlight = <&backlight>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss0_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss0_dp3_out: endpoint { + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss0_dp3_phy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&i2c4 { clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup0_i2c4_default>; + pinctrl-0 = <&i2c4_default>; status = "okay"; @@ -211,19 +459,11 @@ }; }; -&qup1 { - status = "okay"; -}; - -&qup2 { - status = "okay"; -}; - -&qup2_i2c5 { +&i2c21 { clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup2_i2c5_default>; + pinctrl-0 = <&i2c21_default>; status = "okay"; @@ -256,12 +496,98 @@ }; }; -&qup2_uart17 { - compatible = "qcom,geni-debug-uart"; +&pcie2a { + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; + + status = "okay"; +}; + +&pcie2a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; status = "okay"; }; +&pcie3a { + perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wwan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie3a_default>; + + status = "okay"; +}; + +&pcie3a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wlan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie4_default>; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pmc8280c_lpg { + status = "okay"; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&pmk8280_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8280_sdam_6 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + +&qup0 { + status = "okay"; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + &remoteproc_adsp { firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; @@ -274,6 +600,12 @@ status = "okay"; }; +&uart17 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; @@ -297,7 +629,6 @@ }; &usb_0_dwc3 { - /* TODO: Define USB-C connector properly */ dr_mode = "host"; }; @@ -316,12 +647,15 @@ status = "okay"; }; +&usb_0_role_switch { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_1 { status = "okay"; }; &usb_1_dwc3 { - /* TODO: Define USB-C connector properly */ dr_mode = "host"; }; @@ -340,6 +674,10 @@ status = "okay"; }; +&usb_1_role_switch { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &xo_board_clk { clock-frequency = <38400000>; }; @@ -363,6 +701,13 @@ }; }; +&pmc8280_2_gpios { + wwan_sw_en: wwan-sw-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + &pmc8280c_gpios { edp_bl_pwm: edp-bl-pwm-state { pins = "gpio8"; @@ -370,47 +715,135 @@ }; }; +&pmr735a_gpios { + hastings_reg_en: hastings-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + &tlmm { gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + edp_reg_en: edp-reg-en-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + i2c4_default: i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + drive-strength = <16>; + bias-disable; + }; + + i2c21_default: i2c21-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + drive-strength = <16>; + bias-disable; + }; + kybd_default: kybd-default-state { - disable { + disable-pins { pins = "gpio102"; function = "gpio"; output-low; }; - int-n { + int-n-pins { pins = "gpio104"; function = "gpio"; bias-disable; }; - reset { + reset-pins { pins = "gpio105"; function = "gpio"; bias-disable; }; }; - qup0_i2c4_default: qup0-i2c4-default-state { - pins = "gpio171", "gpio172"; - function = "qup4"; - + nvme_reg_en: nvme-reg-en-state { + pins = "gpio135"; + function = "gpio"; + drive-strength = <2>; bias-disable; - drive-strength = <16>; }; - qup2_i2c5_default: qup2-i2c5-default-state { - pins = "gpio81", "gpio82"; - function = "qup21"; + pcie2a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio142"; + function = "pcie2a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; - bias-disable; - drive-strength = <16>; + perst-n-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3a_default: pcie3a-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie3a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio140"; + function = "pcie4_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio141"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio139"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; tpad_default: tpad-default-state { - int-n { + int-n-pins { pins = "gpio182"; function = "gpio"; bias-disable; @@ -418,17 +851,67 @@ }; ts0_default: ts0-default-state { - int-n { + int-n-pins { pins = "gpio175"; function = "gpio"; bias-disable; }; - reset-n { + reset-n-pins { pins = "gpio99"; function = "gpio"; output-high; drive-strength = <16>; }; }; + + usb0_sbu_default: usb0-sbu-state { + oe-n-pins { + pins = "gpio101"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + + sel-pins { + pins = "gpio164"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + + mode-pins { + pins = "gpio167"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + }; + + usb1_sbu_default: usb1-sbu-state { + oe-n-pins { + pins = "gpio48"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + + sel-pins { + pins = "gpio47"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + + mode-pins { + pins = "gpio50"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index b2b744bb8a53..bdcba719fc38 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -7,6 +7,11 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sc8280xp.dtsi" @@ -16,7 +21,39 @@ model = "Lenovo ThinkPad X13s"; compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp"; - backlight { + aliases { + i2c4 = &i2c4; + i2c21 = &i2c21; + serial1 = &uart2; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9380-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_s10b>; + vdd-rxtx-supply = <&vreg_s10b>; + vdd-io-supply = <&vreg_s10b>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + #sound-dai-cells = <1>; + }; + + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pmc8280c_lpg 3 1000000>; enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; @@ -26,6 +63,115 @@ pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_int_n_default>; + + switch-lid { + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + pmic-glink { + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_con0_hs: endpoint { + remote-endpoint = <&usb_0_role_switch>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_con0_ss: endpoint { + remote-endpoint = <&mdss0_dp0_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con0_sbu: endpoint { + remote-endpoint = <&usb0_sbu_mux>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + pmic_glink_con1_hs: endpoint { + remote-endpoint = <&usb_1_role_switch>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_con1_ss: endpoint { + remote-endpoint = <&mdss0_dp1_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con1_sbu: endpoint { + remote-endpoint = <&usb1_sbu_mux>; + }; + }; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_reg_en>; + + regulator-boot-on; + }; + vreg_edp_bl: regulator-edp-bl { compatible = "regulator-fixed"; @@ -58,20 +204,194 @@ regulator-boot-on; regulator-always-on; }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VCC3_SSD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&nvme_reg_en>; + + regulator-boot-on; + }; + + vreg_vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "VPH_VCC3R9"; + regulator-min-microvolt = <3900000>; + regulator-max-microvolt = <3900000>; + + regulator-always-on; + }; + + vreg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "VCC_WLAN_3R9"; + regulator-min-microvolt = <3900000>; + regulator-max-microvolt = <3900000>; + + gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&hastings_reg_en>; + + regulator-boot-on; + }; + + vreg_wwan: regulator-wwan { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B_WAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wwan_sw_en>; + + regulator-boot-on; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + thermal-zones { + skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + thermal-sensors = <&pmk8280_adc_tm 5>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <55000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <73000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + usb0-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb0_sbu_default>; + + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + port { + usb0_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con0_sbu>; + }; + }; + }; + + usb1-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb1_sbu_default>; + + mode-switch; + orientation-switch; + svid = /bits/ 16 <0xff01>; + + port { + usb1_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con1_sbu>; + }; + }; + }; }; &apps_rsc { - pmc8280-1-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; + vdd-l1-l4-supply = <&vreg_s12b>; + vdd-l2-l7-supply = <&vreg_bob>; vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; + + vreg_s10b: smps10 { + regulator-name = "vreg_s10b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; vreg_s11b: smps11 { regulator-name = "vreg_s11b"; regulator-min-microvolt = <1272000>; regulator-max-microvolt = <1272000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_s12b: smps12 { + regulator-name = "vreg_s12b"; + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l3b: ldo3 { @@ -95,14 +415,28 @@ regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-boot-on; - regulator-always-on; // FIXME: VDD_A_EDP_0_0P9 }; }; - pmc8280c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; + vdd-bob-supply = <&vreg_vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1c>; + vdd-l2-l8-supply = <&vreg_s1c>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s11b>; + + vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + vreg_l1c: ldo1 { regulator-name = "vreg_l1c"; regulator-min-microvolt = <1800000>; @@ -123,13 +457,25 @@ regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-always-on; + }; }; - pmc8280-2-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "d"; vdd-l1-l4-supply = <&vreg_s11b>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; vreg_l3d: ldo3 { regulator-name = "vreg_l3d"; @@ -145,6 +491,13 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l6d: ldo6 { + regulator-name = "vreg_l6d"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l7d: ldo7 { regulator-name = "vreg_l7d"; regulator-min-microvolt = <3072000>; @@ -161,23 +514,76 @@ }; }; -&pmc8280c_lpg { +&dispcc0 { status = "okay"; }; -&pmk8280_pon_pwrkey { +&mdss0 { status = "okay"; }; -&qup0 { +&mdss0_dp0 { status = "okay"; }; -&qup0_i2c4 { +&mdss0_dp0_out { + data-lanes = <0 1>; + remote-endpoint = <&pmic_glink_con0_ss>; +}; + +&mdss0_dp1 { + status = "okay"; +}; + +&mdss0_dp1_out { + data-lanes = <0 1>; + remote-endpoint = <&pmic_glink_con1_ss>; +}; + +&mdss0_dp3 { + compatible = "qcom,sc8280xp-edp"; + + data-lanes = <0 1 2 3>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + + backlight = <&backlight>; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss0_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss0_dp3_out: endpoint { + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss0_dp3_phy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&i2c4 { clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup0_i2c4_default>; + pinctrl-0 = <&i2c4_default>; status = "okay"; @@ -189,25 +595,18 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_s10b>; pinctrl-names = "default"; pinctrl-0 = <&ts0_default>; }; }; -&qup1 { - status = "okay"; -}; - -&qup2 { - status = "okay"; -}; - -&qup2_i2c5 { +&i2c21 { clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&qup2_i2c5_default>; + pinctrl-0 = <&i2c21_default>, <&tpad_default>; status = "okay"; @@ -218,13 +617,9 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; + vddl-supply = <&vreg_s10b>; wakeup-source; - - status = "disabled"; }; touchpad@2c { @@ -234,9 +629,7 @@ hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; + vddl-supply = <&vreg_s10b>; wakeup-source; }; @@ -248,6 +641,7 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_s10b>; pinctrl-names = "default"; pinctrl-0 = <&kybd_default>; @@ -256,6 +650,278 @@ }; }; +&pcie2a { + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; + + status = "okay"; +}; + +&pcie2a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pcie3a { + perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wwan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie3a_default>; + + status = "okay"; +}; + +&pcie3a_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wlan>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie4_default>; + + status = "okay"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + bus-range = <0x01 0xff>; + + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + qcom,ath11k-calibration-variant = "LE_X13S"; + }; + }; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&pmc8280c_lpg { + status = "okay"; +}; + +&pmk8280_adc_tm { + status = "okay"; + + sys-therm@0 { + reg = <0>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@1 { + reg = <1>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@2 { + reg = <2>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@3 { + reg = <3>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@4 { + reg = <4>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@5 { + reg = <5>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@6 { + reg = <6>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@7 { + reg = <7>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&pmk8280_pon_resin { + status = "okay"; +}; + +&pmk8280_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8280_sdam_6 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + +&pmk8280_vadc { + status = "okay"; + + pmic-die-temp@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_die_temp"; + }; + + xo-therm@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "pmk8350_xo_therm"; + }; + + pmic-die-temp@103 { + reg = <PM8350_ADC7_DIE_TEMP(1)>; + qcom,pre-scaling = <1 1>; + label = "pmc8280_1_die_temp"; + }; + + sys-therm@144 { + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm1"; + }; + + sys-therm@145 { + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm2"; + }; + + sys-therm@146 { + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm3"; + }; + + sys-therm@147 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm4"; + }; + + pmic-die-temp@303 { + reg = <PM8350_ADC7_DIE_TEMP(3)>; + qcom,pre-scaling = <1 1>; + label = "pmc8280_2_die_temp"; + }; + + sys-therm@344 { + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm5"; + }; + + sys-therm@345 { + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm6"; + }; + + sys-therm@346 { + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm7"; + }; + + sys-therm@347 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm8"; + }; + + pmic-die-temp@403 { + reg = <PMR735A_ADC7_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "pmr735a_die_temp"; + }; +}; + +&qup0 { + status = "okay"; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + &remoteproc_adsp { firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn"; @@ -268,12 +934,171 @@ status = "okay"; }; +&rxmacro { + status = "okay"; +}; + +&sound { + compatible = "qcom,sc8280xp-sndcard"; + model = "SC8280XP-LENOVO-X13S"; + audio-routing = + "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC0", "VA MIC BIAS1", + "VA DMIC1", "VA MIC BIAS1", + "VA DMIC2", "VA MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + + codec { + sound-dai = <&vamacro 0>; + }; + }; +}; + +&swr0 { + status = "okay"; + + left_spkr: wsa8830-left@0,1 { + compatible = "sdw10217020200"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_1_sd_n_default>; + powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + vdd-supply = <&vreg_s10b>; + }; + + right_spkr: wsa8830-right@0,2 { + compatible = "sdw10217020200"; + reg = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_default>; + powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + vdd-supply = <&vreg_s10b>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_rx: wcd9380-rx@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + wcd_tx: wcd9380-tx@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + +&txmacro { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2_default>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddio-supply = <&vreg_s10b>; + vddbtcxmx-supply = <&vreg_s12b>; + vddrfacmn-supply = <&vreg_s12b>; + vddrfa0p8-supply = <&vreg_s12b>; + vddrfa1p2-supply = <&vreg_s11b>; + vddrfa1p7-supply = <&vreg_s1c>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + &usb_0 { status = "okay"; }; &usb_0_dwc3 { - /* TODO: Define USB-C connector properly */ dr_mode = "host"; }; @@ -292,12 +1117,15 @@ status = "okay"; }; +&usb_0_role_switch { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_1 { status = "okay"; }; &usb_1_dwc3 { - /* TODO: Define USB-C connector properly */ dr_mode = "host"; }; @@ -316,12 +1144,35 @@ status = "okay"; }; +&usb_1_role_switch { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + +&vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic02_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_s10b>; + + qcom,dmic-sample-rate = <4800000>; + + status = "okay"; +}; + +&wsamacro { + status = "okay"; +}; + &xo_board_clk { clock-frequency = <38400000>; }; /* PINCTRL */ +&lpass_tlmm { + status = "okay"; +}; + &pmc8280_1_gpios { edp_bl_en: edp-bl-en-state { pins = "gpio8"; @@ -339,6 +1190,13 @@ }; }; +&pmc8280_2_gpios { + wwan_sw_en: wwan-sw-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + &pmc8280c_gpios { edp_bl_pwm: edp-bl-pwm-state { pins = "gpio8"; @@ -346,45 +1204,176 @@ }; }; +&pmr735a_gpios { + hastings_reg_en: hastings-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + &tlmm { gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + bt_default: bt-default-state { + hstp-bt-en-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + hstp-sw-ctrl-pins { + pins = "gpio132"; + function = "gpio"; + bias-pull-down; + }; + }; + + edp_reg_en: edp-reg-en-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio107"; + function = "gpio"; + bias-disable; + }; + + i2c4_default: i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + drive-strength = <16>; + bias-disable; + }; + + i2c21_default: i2c21-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + drive-strength = <16>; + bias-disable; + }; + kybd_default: kybd-default-state { - disable { + disable-pins { pins = "gpio102"; function = "gpio"; output-low; }; - int-n { + int-n-pins { pins = "gpio104"; function = "gpio"; bias-disable; }; - reset { + reset-pins { pins = "gpio105"; function = "gpio"; bias-disable; }; }; - qup0_i2c4_default: qup0-i2c4-default-state { - pins = "gpio171", "gpio172"; - function = "qup4"; + nvme_reg_en: nvme-reg-en-state { + pins = "gpio135"; + function = "gpio"; + drive-strength = <2>; bias-disable; - drive-strength = <16>; }; - qup2_i2c5_default: qup2-i2c5-default-state { - pins = "gpio81", "gpio82"; - function = "qup21"; - bias-disable; - drive-strength = <16>; + pcie2a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio142"; + function = "pcie2a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3a_default: pcie3a-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie3a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio140"; + function = "pcie4_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio141"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio139"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + spkr_1_sd_n_default: spkr-1-sd-n-default-state { + perst-n-pins { + pins = "gpio178"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spkr_2_sd_n_default: spkr-2-sd-n-default-state { + perst-n-pins { + pins = "gpio179"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; }; tpad_default: tpad-default-state { - int-n { + int-n-pins { pins = "gpio182"; function = "gpio"; bias-disable; @@ -392,17 +1381,87 @@ }; ts0_default: ts0-default-state { - int-n { + int-n-pins { pins = "gpio175"; function = "gpio"; bias-disable; }; - reset-n { + reset-n-pins { pins = "gpio99"; function = "gpio"; output-high; drive-strength = <16>; }; }; + + uart2_default: uart2-default-state { + cts-pins { + pins = "gpio121"; + function = "qup2"; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio122"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio124"; + function = "qup2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio123"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + }; + + usb0_sbu_default: usb0-sbu-state { + oe-n-pins { + pins = "gpio101"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + + sel-pins { + pins = "gpio164"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + }; + + usb1_sbu_default: usb1-sbu-state { + oe-n-pins { + pins = "gpio48"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + + sel-pins { + pins = "gpio47"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + }; + + wcd_default: wcd-default-state { + reset-pins { + pins = "gpio106"; + function = "gpio"; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index 24836b6b9bbc..a0ba535bb6c9 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -7,6 +7,50 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm8280_1_thermal: pm8280-1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8280_1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pm8280_2_thermal: pm8280-2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8280_2_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmk8280: pmic@0 { compatible = "qcom,pmk8350", "qcom,spmi-pmic"; @@ -15,15 +59,60 @@ #size-cells = <0>; pmk8280_pon: pon@1300 { - compatible = "qcom,pm8998-pon"; - reg = <0x1300>; + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, <0x800>; + reg-names = "hlos", "pbs"; pmk8280_pon_pwrkey: pwrkey { compatible = "qcom,pmk8350-pwrkey"; - interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; linux,code = <KEY_POWER>; status = "disabled"; }; + + pmk8280_pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + status = "disabled"; + }; + }; + + pmk8280_vadc: adc@3100 { + compatible = "qcom,spmi-adc7"; + reg = <0x3100>; + interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + pmk8280_adc_tm: adc-tm@3400 { + compatible = "qcom,spmi-adc-tm5-gen2"; + reg = <0x3400>; + interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + pmk8280_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + wakeup-source; + status = "disabled"; + }; + + pmk8280_sdam_6: nvram@8500 { + compatible = "qcom,spmi-sdam"; + reg = <0x8500>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8500 0x100>; + status = "disabled"; }; }; @@ -33,6 +122,13 @@ #address-cells = <1>; #size-cells = <0>; + pm8280_1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmc8280_1_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; reg = <0x8800>; @@ -78,6 +174,13 @@ #address-cells = <1>; #size-cells = <0>; + pm8280_2_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmc8280_2_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; reg = <0x8800>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index c32bcded2aef..cc4aef21e617 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -4,13 +4,18 @@ * Copyright (c) 2022, Linaro Limited */ +#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8280xp.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/thermal/thermal.h> / { @@ -32,152 +37,15 @@ }; }; - cpu0_opp_table: cpu0-opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - }; - opp-403200000 { - opp-hz = /bits/ 64 <403200000>; - }; - opp-499200000 { - opp-hz = /bits/ 64 <499200000>; - }; - opp-595200000 { - opp-hz = /bits/ 64 <595200000>; - }; - opp-691200000 { - opp-hz = /bits/ 64 <691200000>; - }; - opp-806400000 { - opp-hz = /bits/ 64 <806400000>; - }; - opp-902400000 { - opp-hz = /bits/ 64 <902400000>; - }; - opp-1017600000 { - opp-hz = /bits/ 64 <1017600000>; - }; - opp-1113600000 { - opp-hz = /bits/ 64 <1113600000>; - }; - opp-1209600000 { - opp-hz = /bits/ 64 <1209600000>; - }; - opp-1324800000 { - opp-hz = /bits/ 64 <1324800000>; - }; - opp-1440000000 { - opp-hz = /bits/ 64 <1440000000>; - }; - opp-1555200000 { - opp-hz = /bits/ 64 <1555200000>; - }; - opp-1670400000 { - opp-hz = /bits/ 64 <1670400000>; - }; - opp-1785600000 { - opp-hz = /bits/ 64 <1785600000>; - }; - opp-1881600000 { - opp-hz = /bits/ 64 <1881600000>; - }; - opp-1996800000 { - opp-hz = /bits/ 64 <1996800000>; - }; - opp-2112000000 { - opp-hz = /bits/ 64 <2112000000>; - }; - opp-2227200000 { - opp-hz = /bits/ 64 <2227200000>; - }; - opp-2342400000 { - opp-hz = /bits/ 64 <2342400000>; - }; - opp-2438400000 { - opp-hz = /bits/ 64 <2438400000>; - }; - }; - - cpu4_opp_table: cpu4-opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-825600000 { - opp-hz = /bits/ 64 <825600000>; - }; - opp-940800000 { - opp-hz = /bits/ 64 <940800000>; - }; - opp-1056000000 { - opp-hz = /bits/ 64 <1056000000>; - }; - opp-1171200000 { - opp-hz = /bits/ 64 <1171200000>; - }; - opp-1286400000 { - opp-hz = /bits/ 64 <1286400000>; - }; - opp-1401600000 { - opp-hz = /bits/ 64 <1401600000>; - }; - opp-1516800000 { - opp-hz = /bits/ 64 <1516800000>; - }; - opp-1632000000 { - opp-hz = /bits/ 64 <1632000000>; - }; - opp-1747200000 { - opp-hz = /bits/ 64 <1747200000>; - }; - opp-1862400000 { - opp-hz = /bits/ 64 <1862400000>; - }; - opp-1977600000 { - opp-hz = /bits/ 64 <1977600000>; - }; - opp-2073600000 { - opp-hz = /bits/ 64 <2073600000>; - }; - opp-2169600000 { - opp-hz = /bits/ 64 <2169600000>; - }; - opp-2284800000 { - opp-hz = /bits/ 64 <2284800000>; - }; - opp-2400000000 { - opp-hz = /bits/ 64 <2400000000>; - }; - opp-2496000000 { - opp-hz = /bits/ 64 <2496000000>; - }; - opp-2592000000 { - opp-hz = /bits/ 64 <2592000000>; - }; - opp-2688000000 { - opp-hz = /bits/ 64 <2688000000>; - }; - opp-2803200000 { - opp-hz = /bits/ 64 <2803200000>; - }; - opp-2899200000 { - opp-hz = /bits/ 64 <2899200000>; - }; - opp-2995200000 { - opp-hz = /bits/ 64 <2995200000>; - }; - }; - cpus { #address-cells = <2>; #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_0>; @@ -185,20 +53,26 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; L3_0: l3-cache { - compatible = "cache"; + compatible = "cache"; + cache-level = <3>; + cache-unified; }; }; }; CPU1: cpu@100 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_100>; @@ -206,17 +80,21 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; CPU2: cpu@200 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_200>; @@ -224,17 +102,21 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; CPU3: cpu@300 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_300>; @@ -242,17 +124,21 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; CPU4: cpu@400 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_400>; @@ -260,17 +146,21 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; CPU5: cpu@500 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_500>; @@ -278,17 +168,21 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; CPU6: cpu@600 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_600>; @@ -296,17 +190,21 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; CPU7: cpu@700 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_700>; @@ -314,9 +212,12 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -384,7 +285,6 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c344>; entry-latency-us = <3263>; exit-latency-us = <6562>; @@ -477,6 +377,200 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <(300000 * 32)>; + }; + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <(384000 * 32)>; + }; + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + opp-peak-kBps = <(480000 * 32)>; + }; + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + opp-peak-kBps = <(576000 * 32)>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-peak-kBps = <(672000 * 32)>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + opp-peak-kBps = <(768000 * 32)>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <(864000 * 32)>; + }; + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <(960000 * 32)>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <(1075200 * 32)>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <(1171200 * 32)>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <(1267200 * 32)>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + opp-peak-kBps = <(1363200 * 32)>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <(1536000 * 32)>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-peak-kBps = <(1612800 * 32)>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2438400000 { + opp-hz = /bits/ 64 <2438400000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <(768000 * 32)>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <(864000 * 32)>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <(960000 * 32)>; + }; + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + opp-peak-kBps = <(1171200 * 32)>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <(1267200 * 32)>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <(1363200 * 32)>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <(1459200 * 32)>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <(1612800 * 32)>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2284800000 { + opp-hz = /bits/ 64 <2284800000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2496000000 { + opp-hz = /bits/ 64 <2496000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2688000000 { + opp-hz = /bits/ 64 <2688000000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2803200000 { + opp-hz = /bits/ 64 <2803200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2899200000 { + opp-hz = /bits/ 64 <2899200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + opp-2995200000 { + opp-hz = /bits/ 64 <2995200000>; + opp-peak-kBps = <(1689600 * 32)>; + }; + }; + + qup_opp_table_100mhz: opp-table-qup100mhz { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; @@ -486,74 +580,60 @@ compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD1: cpu1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD2: cpu2 { + CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD3: cpu3 { + CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD4: cpu4 { + CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD5: cpu5 { + CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD6: cpu6 { + CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD7: cpu7 { + CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CLUSTER_PD: cpu-cluster0 { + CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_SLEEP_0>; }; }; - qup_opp_table_100mhz: qup-100mhz-opp-table { - compatible = "operating-points-v2"; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - }; - reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -711,20 +791,15 @@ <0>, <0>, <0>, - <&usb_0_ssphy>, - <0>, + <&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>, <0>, <0>, <0>, <0>, <0>, - <&usb_1_ssphy>, - <0>, - <0>, - <0>, - <0>, <0>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>, <0>, <0>, @@ -734,6 +809,11 @@ <0>, <0>, <0>, + <&pcie2a_phy>, + <&pcie2b_phy>, + <&pcie3a_phy>, + <&pcie3b_phy>, + <&pcie4_phy>, <0>, <0>; power-domains = <&rpmhpd SC8280XP_CX>; @@ -762,7 +842,71 @@ status = "disabled"; - qup2_uart17: serial@884000 { + i2c16: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi16: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c17: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi17: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + uart17: serial@884000 { compatible = "qcom,geni-uart"; reg = <0 0x00884000 0 0x4000>; clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; @@ -776,7 +920,103 @@ status = "disabled"; }; - qup2_i2c5: i2c@894000 { + i2c18: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi18: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c19: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi19: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c20: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi20: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c21: i2c@894000 { compatible = "qcom,geni-i2c"; reg = <0 0x00894000 0 0x4000>; clock-names = "se"; @@ -791,6 +1031,86 @@ interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; + + spi21: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c22: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi22: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c23: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi23: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; }; qup0: geniqup@9c0000 { @@ -807,7 +1127,149 @@ status = "disabled"; - qup0_i2c4: i2c@990000 { + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + operating-points-v2 = <&qup_opp_table_100mhz>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c4: i2c@990000 { compatible = "qcom,geni-i2c"; reg = <0 0x00990000 0 0x4000>; clock-names = "se"; @@ -822,6 +1284,118 @@ interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; }; qup1: geniqup@ac0000 { @@ -837,6 +1411,767 @@ ranges; status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + rng: rng@10d3000 { + compatible = "qcom,prng-ee"; + reg = <0 0x010d3000 0 0x1000>; + clocks = <&rpmhcc RPMH_HWKM_CLK>; + clock-names = "core"; + }; + + pcie4: pcie@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x30000000 0x0 0xf1d>, + <0x0 0x30000f20 0x0 0xa8>, + <0x0 0x30001000 0x0 0x1000>, + <0x0 0x30100000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x30200000 0x0 0x100000>, + <0x02000000 0x0 0x30300000 0x0 0x30300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <6>; + num-lanes = <1>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>, + <&gcc GCC_CNOC_PCIE4_QX_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf", + "cnoc_qx"; + + assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_4 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_4_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_4_GDSC>; + + phys = <&pcie4_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie4_phy: phy@1c06000 { + compatible = "qcom,sc8280xp-qmp-gen3x1-pcie-phy"; + reg = <0x0 0x01c06000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_CLKREF_CLK>, + <&gcc GCC_PCIE4_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_4_PIPE_CLK>, + <&gcc GCC_PCIE_4_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE4_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_4_GDSC>; + + resets = <&gcc GCC_PCIE_4_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_4_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie3b: pcie@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c08000 0x0 0x3000>, + <0x0 0x32000000 0x0 0xf1d>, + <0x0 0x32000f20 0x0 0xa8>, + <0x0 0x32001000 0x0 0x1000>, + <0x0 0x32100000 0x0 0x100000>, + <0x0 0x01c0b000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x32200000 0x0 0x100000>, + <0x02000000 0x0 0x32300000 0x0 0x32300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <5>; + num-lanes = <2>; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_3B_AUX_CLK>, + <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3B_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_3B_SLV_AXI_CLK>, + <&gcc GCC_PCIE_3B_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_3B_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_3B 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3B 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_3B_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_3B_GDSC>; + + phys = <&pcie3b_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie3b_phy: phy@1c0e000 { + compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy"; + reg = <0x0 0x01c0e000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_3B_AUX_CLK>, + <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3A3B_CLKREF_CLK>, + <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_3B_PIPE_CLK>, + <&gcc GCC_PCIE_3B_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_3B_GDSC>; + + resets = <&gcc GCC_PCIE_3B_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_3b_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie3a: pcie@1c10000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c10000 0x0 0x3000>, + <0x0 0x34000000 0x0 0xf1d>, + <0x0 0x34000f20 0x0 0xa8>, + <0x0 0x34001000 0x0 0x1000>, + <0x0 0x34100000 0x0 0x100000>, + <0x0 0x01c13000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x34200000 0x0 0x100000>, + <0x02000000 0x0 0x34300000 0x0 0x34300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <4>; + num-lanes = <4>; + + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_3A_AUX_CLK>, + <&gcc GCC_PCIE_3A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_3A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_3A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_3A_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_3A 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3A 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_3A_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_3A_GDSC>; + + phys = <&pcie3a_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie3a_phy: phy@1c14000 { + compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy"; + reg = <0x0 0x01c14000 0x0 0x2000>, + <0x0 0x01c16000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_3A_AUX_CLK>, + <&gcc GCC_PCIE_3A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3A3B_CLKREF_CLK>, + <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_3A_PIPE_CLK>, + <&gcc GCC_PCIE_3A_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_3A_GDSC>; + + resets = <&gcc GCC_PCIE_3A_PHY_BCR>; + reset-names = "phy"; + + qcom,4ln-config-sel = <&tcsr 0xa044 1>; + + #clock-cells = <0>; + clock-output-names = "pcie_3a_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie2b: pcie@1c18000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c18000 0x0 0x3000>, + <0x0 0x38000000 0x0 0xf1d>, + <0x0 0x38000f20 0x0 0xa8>, + <0x0 0x38001000 0x0 0x1000>, + <0x0 0x38100000 0x0 0x100000>, + <0x0 0x01c1b000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x38200000 0x0 0x100000>, + <0x02000000 0x0 0x38300000 0x0 0x38300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <3>; + num-lanes = <2>; + + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_2B_AUX_CLK>, + <&gcc GCC_PCIE_2B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2B_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2B_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2B_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_2B_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_2B 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2B 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_2B_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2B_GDSC>; + + phys = <&pcie2b_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie2b_phy: phy@1c1e000 { + compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy"; + reg = <0x0 0x01c1e000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_2B_AUX_CLK>, + <&gcc GCC_PCIE_2B_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2A2B_CLKREF_CLK>, + <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_2B_PIPE_CLK>, + <&gcc GCC_PCIE_2B_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_2B_GDSC>; + + resets = <&gcc GCC_PCIE_2B_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_2b_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie2a: pcie@1c20000 { + device_type = "pci"; + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c20000 0x0 0x3000>, + <0x0 0x3c000000 0x0 0xf1d>, + <0x0 0x3c000f20 0x0 0xa8>, + <0x0 0x3c001000 0x0 0x1000>, + <0x0 0x3c100000 0x0 0x100000>, + <0x0 0x01c23000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>, + <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <2>; + num-lanes = <4>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_2A_AUX_CLK>, + <&gcc GCC_PCIE_2A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + resets = <&gcc GCC_PCIE_2A_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2A_GDSC>; + + phys = <&pcie2a_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie2a_phy: phy@1c24000 { + compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy"; + reg = <0x0 0x01c24000 0x0 0x2000>, + <0x0 0x01c26000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_2A_AUX_CLK>, + <&gcc GCC_PCIE_2A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2A2B_CLKREF_CLK>, + <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_2A_PIPE_CLK>, + <&gcc GCC_PCIE_2A_PIPEDIV2_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_2A_GDSC>; + + resets = <&gcc GCC_PCIE_2A_PHY_BCR>; + reset-names = "phy"; + + qcom,4ln-config-sel = <&tcsr 0xa044 0>; + + #clock-cells = <0>; + clock-output-names = "pcie_2a_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; }; ufs_mem_hc: ufs@1d84000 { @@ -844,7 +2179,7 @@ "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -855,12 +2190,13 @@ required-opps = <&rpmhpd_opp_nom>; iommus = <&apps_smmu 0xe0 0x0>; + dma-coherent; clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, <&gcc GCC_UFS_PHY_AHB_CLK>, <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; @@ -885,27 +2221,20 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0xe10>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clock-names = "ref", - "ref_aux"; - clocks = <&rpmhcc RPMH_CXO_CLK>, + reg = <0 0x01d87000 0 0x1000>; + + clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + power-domains = <&gcc UFS_PHY_GDSC>; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; ufs_card_hc: ufs@1da4000 { @@ -913,7 +2242,7 @@ "jedec,ufs-2.0"; reg = <0 0x01da4000 0 0x3000>; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_card_phy_lanes>; + phys = <&ufs_card_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -923,12 +2252,13 @@ power-domains = <&gcc UFS_CARD_GDSC>; iommus = <&apps_smmu 0x4a0 0x0>; + dma-coherent; clocks = <&gcc GCC_UFS_CARD_AXI_CLK>, <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>, <&gcc GCC_UFS_CARD_AHB_CLK>, <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>, - <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>; @@ -953,28 +2283,20 @@ ufs_card_phy: phy@1da7000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; - reg = <0 0x01da7000 0 0xe10>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clock-names = "ref", - "ref_aux"; + reg = <0 0x01da7000 0 0x1000>; + clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>, <&gcc GCC_UFS_CARD_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + power-domains = <&gcc UFS_CARD_GDSC>; resets = <&ufs_card_hc 0>; reset-names = "ufsphy"; - status = "disabled"; + #phy-cells = <0>; - ufs_card_phy_lanes: phy@1da7400 { - reg = <0 0x01da7400 0 0x108>, - <0 0x01da7600 0 0x1e0>, - <0 0x01da7c00 0 0x1dc>, - <0 0x01da7800 0 0x108>, - <0 0x01da7a00 0 0x1e0>; - #phy-cells = <0>; - }; + status = "disabled"; }; tcsr_mutex: hwlock@1f40000 { @@ -983,6 +2305,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sc8280xp-tcsr", "syscon"; + reg = <0x0 0x01fc0000 0x0 0x30000>; + }; + usb_0_hsphy: phy@88e5000 { compatible = "qcom,sc8280xp-usb-hs-phy", "qcom,usb-snps-hs-5nm-phy"; @@ -1048,70 +2375,52 @@ status = "disabled"; }; - usb_2_qmpphy0: phy-wrapper@88ef000 { + usb_2_qmpphy0: phy@88ef000 { compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; - reg = <0 0x088ef000 0 0x1c8>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088ef000 0 0x2000>; clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_MP0_CLKREF_CLK>, - <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; - reset-names = "phy", "common"; + reset-names = "phy", "phy_phy"; power-domains = <&gcc USB30_MP_GDSC>; - status = "disabled"; + #clock-cells = <0>; + clock-output-names = "usb2_phy0_pipe_clk"; - usb_2_ssphy0: phy@88efe00 { - reg = <0 0x088efe00 0 0x160>, - <0 0x088f0000 0 0x1ec>, - <0 0x088ef200 0 0x1f0>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb2_phy0_pipe_clk"; - }; + #phy-cells = <0>; + + status = "disabled"; }; - usb_2_qmpphy1: phy-wrapper@88f1000 { + usb_2_qmpphy1: phy@88f1000 { compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; - reg = <0 0x088f1000 0 0x1c8>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088f1000 0 0x2000>; clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_MP1_CLKREF_CLK>, - <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; - reset-names = "phy", "common"; + reset-names = "phy", "phy_phy"; power-domains = <&gcc USB30_MP_GDSC>; - status = "disabled"; + #clock-cells = <0>; + clock-output-names = "usb2_phy1_pipe_clk"; - usb_2_ssphy1: phy@88f1e00 { - reg = <0 0x088f1e00 0 0x160>, - <0 0x088f2000 0 0x1ec>, - <0 0x088f1200 0 0x1f0>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb2_phy1_pipe_clk"; - }; + #phy-cells = <0>; + + status = "disabled"; }; remoteproc_adsp: remoteproc@3000000 { @@ -1152,55 +2461,393 @@ label = "lpass"; qcom,remote-pid = <2>; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x0c01 0x0>; + }; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; }; }; - usb_0_qmpphy: phy-wrapper@88ec000 { - compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; - reg = <0 0x088ec000 0 0x1e4>, - <0 0x088eb000 0 0x40>, - <0 0x088ed000 0 0x1c8>; + rxmacro: rxmacro@3200000 { + compatible = "qcom,sc8280xp-lpass-rx-macro"; + reg = <0 0x03200000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + + clock-output-names = "mclk"; + #clock-cells = <0>; + #sound-dai-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&rx_swr_default>; + + status = "disabled"; + }; + + swr1: soundwire-controller@3210000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03210000 0 0x2000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rxmacro>; + clock-names = "iface"; + label = "RX"; + + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0x00 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0x0f 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + + #sound-dai-cells = <1>; #address-cells = <2>; - #size-cells = <2>; - ranges; + #size-cells = <0>; + + status = "disabled"; + }; + + txmacro: txmacro@3220000 { + compatible = "qcom,sc8280xp-lpass-tx-macro"; + reg = <0 0x03220000 0 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&tx_swr_default>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + clock-output-names = "mclk"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + wsamacro: codec@3240000 { + compatible = "qcom,sc8280xp-lpass-wsa-macro"; + reg = <0 0x03240000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_default>; + + status = "disabled"; + }; + + swr0: soundwire-controller@3250000 { + reg = <0 0x03250000 0 0x2000>; + compatible = "qcom,soundwire-v1.6.0"; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wsamacro>; + clock-names = "iface"; + label = "WSA"; + + qcom,din-ports = <2>; + qcom,dout-ports = <6>; + + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + + swr2: soundwire-controller@3330000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03330000 0 0x2000>; + interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + + clocks = <&txmacro>; + clock-names = "iface"; + label = "TX"; + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00 0x01>; + + status = "disabled"; + }; + + vamacro: codec@3370000 { + compatible = "qcom,sc8280xp-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", "macro", "dcodec", "npl"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc8280xp-lpass-lpi-pinctrl"; + reg = <0 0x33c0000 0x0 0x20000>, + <0 0x3550000 0x0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 19>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + status = "disabled"; + + tx_swr_default: tx-swr-default-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_default: rx-swr-default-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic01_sleep: dmic01-sleep-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + dmic02_default: dmic02-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic02_sleep: dmic02-sleep-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + wsa_swr_default: wsa-swr-default-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_default: wsa2-swr-default-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + }; + + usb_0_qmpphy: phy@88eb000 { + compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; + reg = <0 0x088eb000 0 0x4000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB4_EUD_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB30_PRIM_GDSC>; resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, - <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + <&gcc GCC_USB4_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - power-domains = <&gcc USB30_PRIM_GDSC>; + #clock-cells = <1>; + #phy-cells = <1>; status = "disabled"; - - usb_0_ssphy: usb3-phy@88eb400 { - reg = <0 0x088eb400 0 0x100>, - <0 0x088eb600 0 0x3ec>, - <0 0x088ec400 0 0x1f0>, - <0 0x088eba00 0 0x100>, - <0 0x088ebc00 0 0x3ec>, - <0 0x088ec700 0 0x64>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb0_phy_pipe_clk_src"; - }; - - usb_0_dpphy: dp-phy@88ed200 { - reg = <0 0x088ed200 0 0x200>, - <0 0x088ed400 0 0x200>, - <0 0x088eda00 0 0x200>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; }; usb_1_hsphy: phy@8902000 { @@ -1217,58 +2864,165 @@ status = "disabled"; }; - usb_1_qmpphy: phy-wrapper@8904000 { + usb_1_qmpphy: phy@8903000 { compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; - reg = <0 0x08904000 0 0x1e4>, - <0 0x08903000 0 0x40>, - <0 0x08905000 0 0x1c8>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x08903000 0 0x4000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB4_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB30_SEC_GDSC>; resets = <&gcc GCC_USB3_PHY_SEC_BCR>, <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - power-domains = <&gcc USB30_SEC_GDSC>; + #clock-cells = <1>; + #phy-cells = <1>; status = "disabled"; + }; - usb_1_ssphy: usb3-phy@8903400 { - reg = <0 0x08903400 0 0x100>, - <0 0x08903c00 0 0x3ec>, - <0 0x08904400 0 0x1f0>, - <0 0x08903a00 0 0x100>, - <0 0x08903c00 0 0x3ec>, - <0 0x08904200 0 0x18>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb1_phy_pipe_clk_src"; - }; - - usb_1_dpphy: dp-phy@8904200 { - reg = <0 0x08904200 0 0x200>, - <0 0x08904400 0 0x200>, - <0 0x08904a00 0 0x200>, - <0 0x08904600 0 0x200>, - <0 0x08904800 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; + mdss1_dp0_phy: phy@8909a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x08909a00 0 0x19c>, + <0 0x08909200 0 0xec>, + <0 0x08909600 0 0xec>, + <0 0x08909000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss1_dp1_phy: phy@890ca00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x0890ca00 0 0x19c>, + <0 0x0890c200 0 0xec>, + <0 0x0890c600 0 0xec>, + <0 0x0890c000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + pmu@9091000 { + compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0 0x09091000 0 0x1000>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <762000>; + }; + opp-1 { + opp-peak-kBps = <1720000>; + }; + opp-2 { + opp-peak-kBps = <2086000>; + }; + opp-3 { + opp-peak-kBps = <2597000>; + }; + opp-4 { + opp-peak-kBps = <2929000>; + }; + opp-5 { + opp-peak-kBps = <3879000>; + }; + opp-6 { + opp-peak-kBps = <5161000>; + }; + opp-7 { + opp-peak-kBps = <5931000>; + }; + opp-8 { + opp-peak-kBps = <6515000>; + }; + opp-9 { + opp-peak-kBps = <7980000>; + }; + opp-10 { + opp-peak-kBps = <8136000>; + }; + opp-11 { + opp-peak-kBps = <10437000>; + }; + opp-12 { + opp-peak-kBps = <12191000>; + }; + }; + }; + + pmu@90b6400 { + compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x090b6400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2288000>; + }; + opp-1 { + opp-peak-kBps = <4577000>; + }; + opp-2 { + opp-peak-kBps = <7110000>; + }; + opp-3 { + opp-peak-kBps = <9155000>; + }; + opp-4 { + opp-peak-kBps = <12298000>; + }; + opp-5 { + opp-peak-kBps = <14236000>; + }; + opp-6 { + opp-peak-kBps = <15258001>; + }; }; }; system-cache-controller@9200000 { compatible = "qcom,sc8280xp-llcc"; - reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>, + <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>, + <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc4_base", "llcc5_base", + "llcc6_base", "llcc7_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -1305,6 +3059,7 @@ "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_PRIM_BCR>; @@ -1321,8 +3076,13 @@ reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; iommus = <&apps_smmu 0x820 0x0>; - phys = <&usb_0_hsphy>, <&usb_0_ssphy>; + phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_0_role_switch: endpoint { + }; + }; }; }; @@ -1359,6 +3119,7 @@ "ss_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; resets = <&gcc GCC_USB30_SEC_BCR>; @@ -1375,11 +3136,497 @@ reg = <0 0x0a800000 0 0xcd00>; interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>; iommus = <&apps_smmu 0x860 0x0>; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + port { + usb_1_role_switch: endpoint { + }; + }; + }; + }; + + mdss0: display-subsystem@ae00000 { + compatible = "qcom,sc8280xp-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + iommus = <&apps_smmu 0x1000 0x402>; + power-domains = <&dispcc0 MDSS_GDSC>; + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>; + + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss0_mdp: display-controller@ae01000 { + compatible = "qcom,sc8280xp-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + interrupt-parent = <&mdss0>; + interrupts = <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdss0_mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss0_intf0_out: endpoint { + remote-endpoint = <&mdss0_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + mdss0_intf4_out: endpoint { + remote-endpoint = <&mdss0_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + mdss0_intf5_out: endpoint { + remote-endpoint = <&mdss0_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + mdss0_intf6_out: endpoint { + remote-endpoint = <&mdss0_dp2_in>; + }; + }; + }; + + mdss0_mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss0_dp0: displayport-controller@ae90000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss0>; + interrupts = <12>; + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&mdss0_dp0_opp_table>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss0_dp0_in: endpoint { + remote-endpoint = <&mdss0_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss0_dp0_out: endpoint { + }; + }; + }; + + mdss0_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss0_dp1: displayport-controller@ae98000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xae98000 0 0x200>, + <0 0xae98200 0 0x200>, + <0 0xae98400 0 0x600>, + <0 0xae99000 0 0x400>, + <0 0xae99400 0 0x400>; + interrupt-parent = <&mdss0>; + interrupts = <13>; + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&mdss0_dp1_opp_table>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss0_dp1_in: endpoint { + remote-endpoint = <&mdss0_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss0_dp1_out: endpoint { + }; + }; + }; + + mdss0_dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss0_dp2: displayport-controller@ae9a000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xae9a000 0 0x200>, + <0 0xae9a200 0 0x200>, + <0 0xae9a400 0 0x600>, + <0 0xae9b000 0 0x400>, + <0 0xae9b400 0 0x400>; + + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss0>; + interrupts = <14>; + phys = <&mdss0_dp2_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>; + operating-points-v2 = <&mdss0_dp2_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss0_dp2_in: endpoint { + remote-endpoint = <&mdss0_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss0_dp2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss0_dp3: displayport-controller@aea0000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0xaea0000 0 0x200>, + <0 0xaea0200 0 0x200>, + <0 0xaea0400 0 0x600>, + <0 0xaea1000 0 0x400>, + <0 0xaea1400 0 0x400>; + + clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss0>; + interrupts = <15>; + phys = <&mdss0_dp3_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>; + operating-points-v2 = <&mdss0_dp3_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss0_dp3_in: endpoint { + remote-endpoint = <&mdss0_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss0_dp3_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; }; + mdss0_dp2_phy: phy@aec2a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x0aec2a00 0 0x19c>, + <0 0x0aec2200 0 0xec>, + <0 0x0aec2600 0 0xec>, + <0 0x0aec2000 0 0x1c8>; + + clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss0_dp3_phy: phy@aec5a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x0aec5a00 0 0x19c>, + <0 0x0aec5200 0 0xec>, + <0 0x0aec5600 0 0xec>, + <0 0x0aec5000 0 0x1c8>; + + clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + dispcc0: clock-controller@af00000 { + compatible = "qcom,sc8280xp-dispcc0"; + reg = <0 0x0af00000 0 0x20000>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&mdss0_dp2_phy 0>, + <&mdss0_dp2_phy 1>, + <&mdss0_dp3_phy 0>, + <&mdss0_dp3_phy 1>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + + status = "disabled"; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sc8280xp-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -1467,7 +3714,7 @@ #thermal-sensor-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -1476,6 +3723,11 @@ #clock-cells = <0>; }; + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x0c440000 0 0x1100>, @@ -1488,8 +3740,8 @@ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; }; @@ -1743,6 +3995,7 @@ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; label = "apps_rsc"; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; @@ -1806,6 +4059,16 @@ }; }; + epss_l3: interconnect@18590000 { + compatible = "qcom,sc8280xp-epss-l3", "qcom,epss-l3"; + reg = <0 0x18590000 0 0x1000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + cpufreq_hw: cpufreq@18591000 { compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss"; reg = <0 0x18591000 0 0x1000>, @@ -1816,6 +4079,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; remoteproc_nsp0: remoteproc@1b300000 { @@ -1987,6 +4251,478 @@ qcom,remote-pid = <12>; }; }; + + mdss1: display-subsystem@22000000 { + compatible = "qcom,sc8280xp-mdss"; + reg = <0 0x22000000 0 0x1000>; + reg-names = "mdss"; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0x1800 0x402>; + power-domains = <&dispcc1 MDSS_GDSC>; + resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>; + + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss1_mdp: display-controller@22001000 { + compatible = "qcom,sc8280xp-dpu"; + reg = <0 0x22001000 0 0x8f000>, + <0 0x220b0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc1 DISP_CC_MDSS_MDP_CLK>, + <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + interrupt-parent = <&mdss1>; + interrupts = <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdss1_mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_intf0_out: endpoint { + remote-endpoint = <&mdss1_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + mdss1_intf4_out: endpoint { + remote-endpoint = <&mdss1_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + mdss1_intf5_out: endpoint { + remote-endpoint = <&mdss1_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + mdss1_intf6_out: endpoint { + remote-endpoint = <&mdss1_dp2_in>; + }; + }; + }; + + mdss1_mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss1_dp0: displayport-controller@22090000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x22090000 0 0x200>, + <0 0x22090200 0 0x200>, + <0 0x22090400 0 0x600>, + <0 0x22091000 0 0x400>, + <0 0x22091400 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <12>; + phys = <&mdss1_dp0_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>; + operating-points-v2 = <&mdss1_dp0_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp0_in: endpoint { + remote-endpoint = <&mdss1_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss1_dp1: displayport-controller@22098000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x22098000 0 0x200>, + <0 0x22098200 0 0x200>, + <0 0x22098400 0 0x600>, + <0 0x22099000 0 0x400>, + <0 0x22099400 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <13>; + phys = <&mdss1_dp1_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>; + operating-points-v2 = <&mdss1_dp1_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp1_in: endpoint { + remote-endpoint = <&mdss1_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss1_dp2: displayport-controller@2209a000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x2209a000 0 0x200>, + <0 0x2209a200 0 0x200>, + <0 0x2209a400 0 0x600>, + <0 0x2209b000 0 0x400>, + <0 0x2209b400 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <14>; + phys = <&mdss1_dp2_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>; + operating-points-v2 = <&mdss1_dp2_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp2_in: endpoint { + remote-endpoint = <&mdss1_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss1_dp3: displayport-controller@220a0000 { + compatible = "qcom,sc8280xp-dp"; + reg = <0 0x220a0000 0 0x200>, + <0 0x220a0200 0 0x200>, + <0 0x220a0400 0 0x600>, + <0 0x220a1000 0 0x400>, + <0 0x220a1400 0 0x400>; + + clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + interrupt-parent = <&mdss1>; + interrupts = <15>; + phys = <&mdss1_dp3_phy>; + phy-names = "dp"; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>; + operating-points-v2 = <&mdss1_dp3_opp_table>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss1_dp3_in: endpoint { + remote-endpoint = <&mdss1_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + + mdss1_dp3_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + + mdss1_dp2_phy: phy@220c2a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x220c2a00 0 0x19c>, + <0 0x220c2200 0 0xec>, + <0 0x220c2600 0 0xec>, + <0 0x220c2000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss1_dp3_phy: phy@220c5a00 { + compatible = "qcom,sc8280xp-dp-phy"; + reg = <0 0x220c5a00 0 0x19c>, + <0 0x220c5200 0 0xec>, + <0 0x220c5600 0 0xec>, + <0 0x220c5000 0 0x1c8>; + + clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc1 DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + power-domains = <&rpmhpd SC8280XP_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + dispcc1: clock-controller@22100000 { + compatible = "qcom,sc8280xp-dispcc1"; + reg = <0 0x22100000 0 0x20000>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <0>, + <&mdss1_dp0_phy 0>, + <&mdss1_dp0_phy 1>, + <&mdss1_dp1_phy 0>, + <&mdss1_dp1_phy 1>, + <&mdss1_dp2_phy 0>, + <&mdss1_dp2_phy 1>, + <&mdss1_dp3_phy 0>, + <&mdss1_dp3_phy 1>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + + status = "disabled"; + }; + }; + + sound: sound { }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 28050bc5f081..7459525d9982 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -29,7 +29,7 @@ gpio-keys { compatible = "gpio-keys"; - volup { + key-volup { label = "Volume Up"; gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -99,7 +99,7 @@ }; &adsp_pil { - firmware-name = "qcom/ifc6560/adsp.mbn"; + firmware-name = "qcom/sda660/adsp.mbn"; }; &blsp_i2c6 { @@ -231,7 +231,7 @@ }; &rpm_requests { - pm660-regulators { + regulators-0 { compatible = "qcom,rpm-pm660-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -313,7 +313,7 @@ }; }; - pm660l-regulators { + regulators-1 { compatible = "qcom,rpm-pm660l-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -401,16 +401,18 @@ }; &sdc2_state_on { - sd-cd { + sd-cd-pins { pins = "gpio54"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; &sdc2_state_off { - sd-cd { + sd-cd-pins { pins = "gpio54"; + function = "gpio"; bias-disable; drive-strength = <2>; }; @@ -436,7 +438,7 @@ cd-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; no-sdio; - no-emmc; + no-mmc; }; &tlmm { diff --git a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts new file mode 100644 index 000000000000..362be5719dd2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Julian Braha <julianbraha@gmail.com> + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" + +/delete-node/ &qseecom_mem; + +/ { + model = "Motorola Moto G6"; + compatible = "motorola,ali", "qcom,sdm450"; + chassis-type = "handset"; + qcom,msm-id = <338 0>; + qcom,board-id = <0x43 0xc200>; + + gpio-keys { + compatible = "gpio-keys"; + + key-volume-up { + label = "volume_up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84300000 { + reg = <0x0 0x84300000 0x0 0x2000000>; + no-map; + }; + + ramoops@ef000000 { + compatible = "ramoops"; + reg = <0x0 0xef000000 0x0 0xc0000>; + console-size = <0x40000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <&pm8953_l10>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <2160>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmi8950_wled { + qcom,num-strings = <3>; + qcom,external-pfet; + qcom,cabc; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <795000>; + regulator-max-microvolt = <1081000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2050000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <95 5>, <111 1>, <126 1>; + + ts_int_active: ts-int-active-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_active: ts-reset-active-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <0x08>; + bias-pull-up; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts index 71b448978e88..9425b2d9536e 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts @@ -21,6 +21,11 @@ }; }; +/* Reserve a bigger chunk of RAM for the higher-res display */ +&cont_splash_mem { + reg = <0 0x9d400000 0 (2520 * 1080 * 4)>; +}; + /* Ganges devices feature a Novatek touchscreen instead. */ /delete-node/ &touchscreen; /delete-node/ &vreg_l18a_1v8; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 09c07800793a..2ca713a3902a 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -57,7 +57,7 @@ regulator-boot-on; }; - cam_vdig_imx300_219_vreg: cam_vdig_imx300_219_vreg { + cam_vdig_imx300_219_vreg: cam-vdig-imx300-219-regulator { compatible = "regulator-fixed"; regulator-name = "cam_vdig_imx300_219_vreg"; startup-delay-us = <0>; @@ -67,7 +67,7 @@ pinctrl-0 = <&cam_vdig_default>; }; - cam_vana_front_vreg: cam_vana_front_vreg { + cam_vana_front_vreg: cam-vana-front-regulator { compatible = "regulator-fixed"; regulator-name = "cam_vana_front_vreg"; startup-delay-us = <0>; @@ -77,7 +77,7 @@ pinctrl-0 = <&imx219_vana_default>; }; - cam_vana_rear_vreg: cam_vana_rear_vreg { + cam_vana_rear_vreg: cam-vana-rear-regulator { compatible = "regulator-fixed"; regulator-name = "cam_vana_rear_vreg"; startup-delay-us = <0>; @@ -112,7 +112,7 @@ gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_VOLUMEDOWN>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; }; }; @@ -133,15 +133,20 @@ status = "okay"; }; - debug_region@ffb00000 { + debug@ffb00000 { reg = <0x00 0xffb00000 0x00 0x100000>; no-map; }; - removed_region@85800000 { + reserved@85800000 { reg = <0x00 0x85800000 0x00 0x3700000>; no-map; }; + + cont_splash_mem: splash@9d400000 { + reg = <0 0x9d400000 0 (1920 * 1080 * 4)>; + no-map; + }; }; /* @@ -155,7 +160,7 @@ }; &adsp_pil { - firmware-name = "adsp.mdt"; + firmware-name = "qcom/sdm630/Sony/nile/adsp.mdt"; }; &blsp_i2c1 { @@ -260,7 +265,7 @@ }; &rpm_requests { - pm660l-regulators { + regulators-0 { compatible = "qcom,rpm-pm660l-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -394,7 +399,7 @@ }; }; - pm660-regulators { + regulators-1 { compatible = "qcom,rpm-pm660-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -577,16 +582,18 @@ }; &sdc2_state_on { - sd-cd { + sd-cd-pins { pins = "gpio54"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; &sdc2_state_off { - sd-cd { + sd-cd-pins { pins = "gpio54"; + function = "gpio"; bias-disable; drive-strength = <2>; }; @@ -615,33 +622,35 @@ &tlmm { gpio-reserved-ranges = <8 4>; - ts_int_active: ts-int-active { + ts_int_active: ts-int-active-state { pins = "gpio45"; + function = "gpio"; drive-strength = <8>; bias-pull-up; }; - ts_lcd_id_active: ts-lcd-id-active { + ts_lcd_id_active: ts-lcd-id-active-state { pins = "gpio56"; + function = "gpio"; drive-strength = <8>; bias-disable; }; - imx300_vana_default: imx300-vana-default { + imx300_vana_default: imx300-vana-default-state { pins = "gpio50"; function = "gpio"; bias-disable; drive-strength = <2>; }; - imx219_vana_default: imx219-vana-default { + imx219_vana_default: imx219-vana-default-state { pins = "gpio51"; function = "gpio"; bias-disable; drive-strength = <2>; }; - cam_vdig_default: cam-vdig-default { + cam_vdig_default: cam-vdig-default-state { pins = "gpio52"; function = "gpio"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index b51b85f583e5..eaead2f7beb4 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -63,6 +63,7 @@ L2_1: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; @@ -127,6 +128,7 @@ L2_0: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; @@ -328,6 +330,25 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + dsi_opp_table: opp-table-dsi { + compatible = "operating-points-v2"; + + opp-131250000 { + opp-hz = /bits/ 64 <131250000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-210000000 { + opp-hz = /bits/ 64 <210000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-262500000 { + opp-hz = /bits/ 64 <262500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; @@ -678,7 +699,7 @@ mnoc: interconnect@1745000 { compatible = "qcom,sdm660-mnoc"; - reg = <0x01745000 0xA010>; + reg = <0x01745000 0xa010>; #interconnect-cells = <1>; clock-names = "bus", "bus_a", "iface"; clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>, @@ -721,33 +742,36 @@ interrupt-controller; #interrupt-cells = <2>; - blsp1_uart1_default: blsp1-uart1-default { + blsp1_uart1_default: blsp1-uart1-default-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; drive-strength = <2>; bias-disable; }; - blsp1_uart1_sleep: blsp1-uart1-sleep { + blsp1_uart1_sleep: blsp1-uart1-sleep-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - blsp1_uart2_default: blsp1-uart2-default { + blsp1_uart2_default: blsp1-uart2-default-state { pins = "gpio4", "gpio5"; + function = "blsp_uart2"; drive-strength = <2>; bias-disable; }; - blsp2_uart1_default: blsp2-uart1-active { - tx-rts { + blsp2_uart1_default: blsp2-uart1-active-state { + tx-rts-pins { pins = "gpio16", "gpio19"; function = "blsp_uart5"; drive-strength = <2>; bias-disable; }; - rx { + rx-pins { /* * Avoid garbage data while BT module * is powered off or not driving signal @@ -758,7 +782,7 @@ bias-pull-up; }; - cts { + cts-pins { /* Match the pull of the BT module */ pins = "gpio18"; function = "blsp_uart5"; @@ -767,244 +791,232 @@ }; }; - blsp2_uart1_sleep: blsp2-uart1-sleep { - tx { + blsp2_uart1_sleep: blsp2-uart1-sleep-state { + tx-pins { pins = "gpio16"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; - rx-cts-rts { + rx-cts-rts-pins { pins = "gpio17", "gpio18", "gpio19"; function = "gpio"; drive-strength = <2>; - bias-no-pull; + bias-disable; }; }; - i2c1_default: i2c1-default { + i2c1_default: i2c1-default-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; - i2c1_sleep: i2c1-sleep { + i2c1_sleep: i2c1-sleep-state { pins = "gpio2", "gpio3"; function = "blsp_i2c1"; drive-strength = <2>; bias-pull-up; }; - i2c2_default: i2c2-default { + i2c2_default: i2c2-default-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; - i2c2_sleep: i2c2-sleep { + i2c2_sleep: i2c2-sleep-state { pins = "gpio6", "gpio7"; function = "blsp_i2c2"; drive-strength = <2>; bias-pull-up; }; - i2c3_default: i2c3-default { + i2c3_default: i2c3-default-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; drive-strength = <2>; bias-disable; }; - i2c3_sleep: i2c3-sleep { + i2c3_sleep: i2c3-sleep-state { pins = "gpio10", "gpio11"; function = "blsp_i2c3"; drive-strength = <2>; bias-pull-up; }; - i2c4_default: i2c4-default { + i2c4_default: i2c4-default-state { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; - i2c4_sleep: i2c4-sleep { + i2c4_sleep: i2c4-sleep-state { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; drive-strength = <2>; bias-pull-up; }; - i2c5_default: i2c5-default { + i2c5_default: i2c5-default-state { pins = "gpio18", "gpio19"; function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; - i2c5_sleep: i2c5-sleep { + i2c5_sleep: i2c5-sleep-state { pins = "gpio18", "gpio19"; function = "blsp_i2c5"; drive-strength = <2>; bias-pull-up; }; - i2c6_default: i2c6-default { + i2c6_default: i2c6-default-state { pins = "gpio22", "gpio23"; function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; - i2c6_sleep: i2c6-sleep { + i2c6_sleep: i2c6-sleep-state { pins = "gpio22", "gpio23"; function = "blsp_i2c6"; drive-strength = <2>; bias-pull-up; }; - i2c7_default: i2c7-default { + i2c7_default: i2c7-default-state { pins = "gpio26", "gpio27"; function = "blsp_i2c7"; drive-strength = <2>; bias-disable; }; - i2c7_sleep: i2c7-sleep { + i2c7_sleep: i2c7-sleep-state { pins = "gpio26", "gpio27"; function = "blsp_i2c7"; drive-strength = <2>; bias-pull-up; }; - i2c8_default: i2c8-default { + i2c8_default: i2c8-default-state { pins = "gpio30", "gpio31"; - function = "blsp_i2c8"; + function = "blsp_i2c8_a"; drive-strength = <2>; bias-disable; }; - i2c8_sleep: i2c8-sleep { + i2c8_sleep: i2c8-sleep-state { pins = "gpio30", "gpio31"; - function = "blsp_i2c8"; + function = "blsp_i2c8_a"; drive-strength = <2>; bias-pull-up; }; - cci0_default: cci0_default { - pinmux { - pins = "gpio36","gpio37"; - function = "cci_i2c"; - }; - - pinconf { - pins = "gpio36","gpio37"; - bias-pull-up; - drive-strength = <2>; - }; + cci0_default: cci0-default-state { + pins = "gpio36","gpio37"; + function = "cci_i2c"; + bias-pull-up; + drive-strength = <2>; }; - cci1_default: cci1_default { - pinmux { - pins = "gpio38","gpio39"; - function = "cci_i2c"; - }; - - pinconf { - pins = "gpio38","gpio39"; - bias-pull-up; - drive-strength = <2>; - }; + cci1_default: cci1-default-state { + pins = "gpio38","gpio39"; + function = "cci_i2c"; + bias-pull-up; + drive-strength = <2>; }; - sdc1_state_on: sdc1-on { - clk { + sdc1_state_on: sdc1-on-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <10>; }; - rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc1_state_off: sdc1-off { - clk { + sdc1_state_off: sdc1-off-state { + clk-pins { pins = "sdc1_clk"; bias-disable; drive-strength = <2>; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; bias-pull-up; drive-strength = <2>; }; - data { + data-pins { pins = "sdc1_data"; bias-pull-up; drive-strength = <2>; }; - rclk { + rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; - sdc2_state_on: sdc2-on { - clk { + sdc2_state_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; - sdc2_state_off: sdc2-off { - clk { + sdc2_state_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <2>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <2>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <2>; @@ -1053,43 +1065,43 @@ opp-hz = /bits/ 64 <775000000>; opp-level = <RPM_SMD_LEVEL_TURBO>; opp-peak-kBps = <5412000>; - opp-supported-hw = <0xA2>; + opp-supported-hw = <0xa2>; }; opp-647000000 { opp-hz = /bits/ 64 <647000000>; opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; opp-peak-kBps = <4068000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-588000000 { opp-hz = /bits/ 64 <588000000>; opp-level = <RPM_SMD_LEVEL_NOM>; opp-peak-kBps = <3072000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-465000000 { opp-hz = /bits/ 64 <465000000>; opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; opp-peak-kBps = <2724000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-370000000 { opp-hz = /bits/ 64 <370000000>; opp-level = <RPM_SMD_LEVEL_SVS>; opp-peak-kBps = <2188000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-240000000 { opp-hz = /bits/ 64 <240000000>; opp-level = <RPM_SMD_LEVEL_LOW_SVS>; opp-peak-kBps = <1648000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-level = <RPM_SMD_LEVEL_MIN_SVS>; opp-peak-kBps = <1200000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; }; }; @@ -1198,7 +1210,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; usb3: usb@a8f8800 { @@ -1460,26 +1471,7 @@ <0>; }; - dsi_opp_table: opp-table-dsi { - compatible = "operating-points-v2"; - - opp-131250000 { - opp-hz = /bits/ 64 <131250000>; - required-opps = <&rpmpd_opp_svs>; - }; - - opp-210000000 { - opp-hz = /bits/ 64 <210000000>; - required-opps = <&rpmpd_opp_svs_plus>; - }; - - opp-262500000 { - opp-hz = /bits/ 64 <262500000>; - required-opps = <&rpmpd_opp_nom>; - }; - }; - - mdss: mdss@c900000 { + mdss: display-subsystem@c900000 { compatible = "qcom,mdss"; reg = <0x0c900000 0x1000>, <0x0c9b0000 0x1040>; @@ -1506,8 +1498,8 @@ ranges; status = "disabled"; - mdp: mdp@c901000 { - compatible = "qcom,mdp5"; + mdp: display-controller@c901000 { + compatible = "qcom,sdm630-mdp5", "qcom,mdp5"; reg = <0x0c901000 0x89000>; reg-names = "mdp_phys"; @@ -1581,7 +1573,8 @@ }; dsi0: dsi@c994000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sdm660-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0x0c994000 0x400>; reg-names = "dsi_ctrl"; @@ -1616,7 +1609,6 @@ "core"; phys = <&dsi0_phy>; - phy-names = "dsi"; status = "disabled"; @@ -1639,7 +1631,7 @@ }; }; - dsi0_phy: dsi-phy@c994400 { + dsi0_phy: phy@c994400 { compatible = "qcom,dsi-phy-14nm-660"; reg = <0x0c994400 0x100>, <0x0c994500 0x300>, @@ -2224,12 +2216,12 @@ #address-cells = <1>; #size-cells = <0>; - q6core { + service@3 { reg = <APR_SVC_ADSP_CORE>; compatible = "qcom,q6core"; }; - q6afe: apr-service@4 { + q6afe: service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; q6afedai: dais { @@ -2240,7 +2232,7 @@ }; }; - q6asm: apr-service@7 { + q6asm: service@7 { compatible = "qcom,q6asm"; reg = <APR_SVC_ASM>; q6asmdai: dais { @@ -2252,7 +2244,7 @@ }; }; - q6adm: apr-service@8 { + q6adm: service@8 { compatible = "qcom,q6adm"; reg = <APR_SVC_ADM>; q6routing: routing { @@ -2277,7 +2269,8 @@ }; apcs_glb: mailbox@17911000 { - compatible = "qcom,sdm660-apcs-hmss-global"; + compatible = "qcom,sdm660-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x17911000 0x1000>; #mbox-cells = <1>; @@ -2419,7 +2412,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2440,7 +2433,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2461,7 +2454,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2482,7 +2475,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2509,7 +2502,7 @@ type = "passive"; }; - pwr_cluster_crit: cpu_crit { + pwr_cluster_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index 891e314bc782..70e683b7e4fc 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -49,6 +49,35 @@ vdda-phy-dpdm-supply = <&pm8953_l13>; }; +&i2c_3 { + status = "okay"; + + touchscreen@48 { + compatible = "himax,hx83112b"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_LEVEL_LOW>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <2160>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c_5 { + status = "okay"; + + nfc@28 { + compatible = "nxp,nq310", "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + }; +}; + &pm8953_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -69,7 +98,7 @@ }; &rpm_requests { - pm8953-regulators { + regulators { compatible = "qcom,rpm-pm8953-regulators"; vdd_l1-supply = <&pm8953_s3>; diff --git a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts new file mode 100644 index 000000000000..c82d6e628d2c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Gabriela David + */ +/dts-v1/; + +#include "sdm632.dtsi" +#include "pm8953.dtsi" +#include <dt-bindings/leds/common.h> + +/delete-node/ &cont_splash_mem; +/delete-node/ &qseecom_mem; + +/ { + model = "Motorola G7 Power"; + compatible = "motorola,ocean", "qcom,sdm632"; + chassis-type = "handset"; + qcom,msm-id = <349 0>; + qcom,board-id = <0x141 0xc100>; + qcom,pmic-id = <0x10016 0x25 0x00 0x00>; + + backlight: backlight { + compatible = "led-backlight"; + leds = <&led>; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (720 * 1520 * 3)>; + + width = <720>; + height = <1520>; + stride = <(720 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84300000 { + reg = <0x0 0x84300000 0x0 0x2000000>; + no-map; + }; + + cont_splash_mem: cont-splash@90001000 { + reg = <0x0 0x90001000 0x0 (720 * 1520 * 3)>; + no-map; + }; + + reserved@eefa1800 { + reg = <0x00 0xeefa1800 0x00 0x5e800>; + no-map; + }; + + ramoops@ef000000 { + compatible = "ramoops"; + reg = <0x0 0xef000000 0x0 0xbf800>; + console-size = <0x40000>; + pmsg-size = <0x40000>; + record-size = <0x3f800>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@41 { + compatible = "ilitek,ili2117"; + reg = <0x41>; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-inverted-x; + }; +}; + +&i2c_5 { + status = "okay"; + + led-controller@36 { + compatible = "ti,lm3697"; + reg = <0x36>; + + #address-cells = <1>; + #size-cells = <0>; + + led: led@1 { + reg = <1>; + default-trigger = "backlight"; + function = LED_FUNCTION_BACKLIGHT; + led-sources = <0 1 2>; + }; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s3: s3 { + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <1240000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1036000>; + regulator-max-microvolt = <2040000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1050000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1175000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l18: l18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <96 4>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts index 58f687fc49e0..9702e5f59a1d 100644 --- a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts +++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts @@ -19,7 +19,7 @@ }; &sdc2_state_on { - clk { + clk-pins { drive-strength = <14>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index a3559f6e34a5..8fb2d1788742 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -111,7 +111,7 @@ }; &rpm_requests { - pm660l-regulators { + regulators-0 { compatible = "qcom,rpm-pm660l-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -206,7 +206,7 @@ }; }; - pm660-regulators { + regulators-1 { compatible = "qcom,rpm-pm660-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -372,16 +372,18 @@ }; &sdc2_state_on { - sd-cd { + sd-cd-pins { pins = "gpio54"; + function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; &sdc2_state_off { - sd-cd { + sd-cd-pins { pins = "gpio54"; + function = "gpio"; bias-disable; drive-strength = <2>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi index 43220af1b685..f0f27fc12c18 100644 --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -37,35 +37,35 @@ opp-hz = /bits/ 64 <700000000>; opp-level = <RPM_SMD_LEVEL_TURBO>; opp-peak-kBps = <5184000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-647000000 { opp-hz = /bits/ 64 <647000000>; opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; opp-peak-kBps = <4068000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-588000000 { opp-hz = /bits/ 64 <588000000>; opp-level = <RPM_SMD_LEVEL_NOM>; opp-peak-kBps = <3072000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-465000000 { opp-hz = /bits/ 64 <465000000>; opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; opp-peak-kBps = <2724000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-370000000 { opp-hz = /bits/ 64 <370000000>; opp-level = <RPM_SMD_LEVEL_SVS>; opp-peak-kBps = <2188000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; */ @@ -73,14 +73,14 @@ opp-hz = /bits/ 64 <266000000>; opp-level = <RPM_SMD_LEVEL_LOW_SVS>; opp-peak-kBps = <1648000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-level = <RPM_SMD_LEVEL_MIN_SVS>; opp-peak-kBps = <1200000>; - opp-supported-hw = <0xFF>; + opp-supported-hw = <0xff>; }; }; }; @@ -142,6 +142,8 @@ }; &mdp { + compatible = "qcom,sdm660-mdp5", "qcom,mdp5"; + ports { port@1 { reg = <1>; @@ -154,7 +156,8 @@ &mdss { dsi1: dsi@c996000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sdm660-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0x0c996000 0x400>; reg-names = "dsi_ctrl"; @@ -190,7 +193,6 @@ "core"; phys = <&dsi1_phy>; - phy-names = "dsi"; status = "disabled"; @@ -213,7 +215,7 @@ }; }; - dsi1_phy: dsi-phy@c996400 { + dsi1_phy: phy@c996400 { compatible = "qcom,dsi-phy-14nm-660"; reg = <0x0c996400 0x100>, <0x0c996500 0x300>, diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts new file mode 100644 index 000000000000..32a7bd59e1ec --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts @@ -0,0 +1,531 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for Google Pixel 3a, adapted from google-blueline device tree, + * xiaomi-lavender device tree, and oneplus-common device tree. + * + * Copyright (c) 2022, Richard Acayan. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include "sdm670.dtsi" +#include "pm660.dtsi" +#include "pm660l.dtsi" + +/delete-node/ &mpss_region; +/delete-node/ &venus_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &mba_region; +/delete-node/ &adsp_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; + +/ { + model = "Google Pixel 3a"; + compatible = "google,sargo", "qcom,sdm670"; + + aliases { }; + + chosen { + stdout-path = "serial0:115200n8"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x9c000000 0 (1080 * 2220 * 4)>; + width = <1080>; + height = <2220>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin>; + + key-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + mpss_region: mpss@8b000000 { + reg = <0 0x8b000000 0 0x9800000>; + no-map; + }; + + venus_mem: venus@94800000 { + reg = <0 0x94800000 0 0x500000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@94d00000 { + reg = <0 0x94d00000 0 0x100000>; + no-map; + }; + + cdsp_mem: cdsp@94e00000 { + reg = <0 0x94e00000 0 0x800000>; + no-map; + }; + + mba_region: mba@95600000 { + reg = <0 0x95600000 0 0x200000>; + no-map; + }; + + adsp_mem: adsp@95800000 { + reg = <0 0x95800000 0 0x2200000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@97a00000 { + reg = <0 0x97a00000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@97a10000 { + reg = <0 0x97a10000 0 0x5000>; + no-map; + }; + + gpu_mem: gpu@97a15000 { + reg = <0 0x97a15000 0 0x2000>; + no-map; + }; + + framebuffer-region@9c000000 { + reg = <0 0x9c000000 0 0x2400000>; + no-map; + }; + + /* Also includes ramoops regions */ + debug_info_mem: debug-info@a1800000 { + reg = <0 0xa1800000 0 0x411000>; + no-map; + }; + }; + + /* + * The touchscreen regulator seems to be controlled somehow by a gpio. + * Model it as a fixed regulator and keep it on. Without schematics we + * don't know how this is actually wired up... + */ + ts_1p8_supply: ts-1p8-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_1p8_supply"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + + regulator-always-on; + regulator-boot-on; + }; + + /* + * Supply map from xiaomi-lavender specifies this as the supply for + * ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies + * this as a power domain. Set this as a fixed regulator with the same + * voltage as lavender until display is needed to avoid unneccessarily + * using a deprecated binding (regulator-fixed-domain). + */ + vreg_s2b_1p05: vreg-s2b-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s2b"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm660-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l1-l6-l7-supply = <&vreg_s6a_0p87>; + vdd-l2-l3-supply = <&vreg_s2b_1p05>; + vdd-l5-supply = <&vreg_s2b_1p05>; + vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_2p04>; + vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>; + + /* + * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed + * by the Core Power Reduction hardened (CPRh) and the + * Operating State Manager (OSM) HW automatically. + */ + + vreg_s4a_2p04: smps4 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + }; + + vreg_s6a_0p87: smps6 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1352000>; + regulator-enable-ramp-delay = <150>; + }; + + /* LDOs */ + vreg_l1a_1p225: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l2a_1p0: ldo2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l5a_0p848: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l6a_1p3: ldo6 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l7a_1p2: ldo7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8a_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-always-on; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2696000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l17a_1p8: ldo17 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l19a_3p3: ldo19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-enable-ramp-delay = <250>; + }; + }; + + regulators-1 { + compatible = "qcom,pm660l-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>; + vdd-l2-supply = <&vreg_bob>; + vdd-l3-l5-l7-l8-supply = <&vreg_bob>; + vdd-l4-l6-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + /* LDOs */ + vreg_l1b_0p925: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <900000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l2b_2p95: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l3b_3p0: ldo3 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3008000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l4b_2p95: ldo4 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l5b_2p95: ldo5 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l6b_3p3: ldo6 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l7b_3p125: ldo7 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8b_3p3: ldo8 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-enable-ramp-delay = <250>; + }; + + /* + * Downstream specifies a fixed voltage of 3.312 V, but the + * PMIC4 BOB ranges don't support that. Widen the range a + * little to avoid adding a new BOB regulator type. + */ + vreg_bob: bob { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <500>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c9 { + clock-frequency = <100000>; + status = "okay"; + + synaptics-rmi4-i2c@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + + vio-supply = <&ts_1p8_supply>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + touchscreen-x-mm = <62>; + touchscreen-y-mm = <127>; + syna,sensor-type = <1>; + }; + }; +}; + +&pm660l_gpios { + vol_up_pin: vol-up-state { + pins = "gpio7"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + input-enable; + bias-pull-up; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_1 { + supports-cqe; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-ddr-1_8v; + + qcom,ddr-config = <0xc3040873>; + + vmmc-supply = <&vreg_l4b_2p95>; + vqmmc-supply = <&vreg_l8a_1p8>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + touchscreen_default: ts-default-state { + ts-reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-high; + }; + + ts-irq-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts-switch-pins { + pins = "gpio135"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + }; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; + + status = "okay"; +}; + +&usb_1 { + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + /* Only peripheral works for now */ + dr_mode = "peripheral"; + + /* Do not assume that sdm670.dtsi will never support USB 3.0 */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi new file mode 100644 index 000000000000..b61e13db89bd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -0,0 +1,1357 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM670 SoC device tree source, adapted from SDM845 SoC device tree + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Richard Acayan. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,gcc-sdm845.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,sdm670-rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qusb2.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { }; + + chosen { }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x0>; + enable-method = "psci"; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + cache-level = <2>; + cache-unified; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x100>; + enable-method = "psci"; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x200>; + enable-method = "psci"; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x300>; + enable-method = "psci"; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x400>; + enable-method = "psci"; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x500>; + enable-method = "psci"; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x600>; + enable-method = "psci"; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo360"; + reg = <0x0 0x700>; + enable-method = "psci"; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <1617>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <2380>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9825>; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sdm670", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp-mem@85700000 { + reg = <0 0x85700000 0 0x600000>; + no-map; + }; + + xbl_mem: xbl-mem@85e00000 { + reg = <0 0x85e00000 0 0x100000>; + no-map; + }; + + aop_mem: aop-mem@85fc0000 { + reg = <0 0x85fc0000 0 0x20000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 { + compatible = "qcom,cmd-db"; + reg = <0 0x85fe0000 0 0x20000>; + no-map; + }; + + camera_mem: camera-mem@8ab00000 { + reg = <0 0x8ab00000 0 0x500000>; + no-map; + }; + + mpss_region: mpss@8b000000 { + reg = <0 0x8b000000 0 0x7e00000>; + no-map; + }; + + venus_mem: venus@92e00000 { + reg = <0 0x92e00000 0 0x500000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@93300000 { + reg = <0 0x93300000 0 0x100000>; + no-map; + }; + + cdsp_mem: cdsp@93400000 { + reg = <0 0x93400000 0 0x800000>; + no-map; + }; + + mba_region: mba@93c00000 { + reg = <0 0x93c00000 0 0x200000>; + no-map; + }; + + adsp_mem: adsp@93e00000 { + reg = <0 0x93e00000 0 0x1e00000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@95c00000 { + reg = <0 0x95c00000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@95c10000 { + reg = <0 0x95c10000 0 0x5000>; + no-map; + }; + + gpu_mem: gpu@95c15000 { + reg = <0 0x95c15000 0 0x2000>; + no-map; + }; + + spss_mem: spss@97b00000 { + reg = <0 0x97b00000 0 0x100000>; + no-map; + }; + + qseecom_mem: qseecom@9e400000 { + reg = <0 0x9e400000 0 0x1400000>; + no-map; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdm670"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + qfprom: qfprom@784000 { + compatible = "qcom,sdm670-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@1eb { + reg = <0x1eb 0x1>; + bits = <1 4>; + }; + }; + + sdhc_1: mmc@7c4000 { + compatible = "qcom,sdm670-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>, + <0 0x007c8000 0 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>; + clock-names = "iface", "core", "xo", "ice", "bus"; + interconnects = <&aggre1_noc MASTER_EMMC 0 &aggre1_noc SLAVE_A1NOC_SNOC 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_EMMC_CFG 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + operating-points-v2 = <&sdhc1_opp_table>; + + iommus = <&apps_smmu 0x140 0xf>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + power-domains = <&rpmhpd SDM670_CX>; + + bus-width = <8>; + non-removable; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-20000000 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmhpd_opp_min_svs>; + opp-peak-kBps = <80000 80000>; + opp-avg-kBps = <52286 80000>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <200000 100000>; + opp-avg-kBps = <130718 100000>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <200000 130000>; + opp-avg-kBps = <130718 130000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <4096000 4096000>; + opp-avg-kBps = <1338562 1338562>; + }; + }; + }; + + gpi_dma0: dma-controller@800000 { + #dma-cells = <3>; + compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x16 0x0>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core"; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + #dma-cells = <3>; + compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x6d6 0x0>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x6c3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core"; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + mem_noc: interconnect@1380000 { + compatible = "qcom,sdm670-mem-noc"; + reg = <0 0x01380000 0 0x27200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect@14e0000 { + compatible = "qcom,sdm670-dc-noc"; + reg = <0 0x014e0000 0 0x400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sdm670-config-noc"; + reg = <0 0x01500000 0 0x5080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sdm670-system-noc"; + reg = <0 0x01620000 0 0x18080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sdm670-aggre1-noc"; + reg = <0 0x016e0000 0 0x15080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sdm670-aggre2-noc"; + reg = <0 0x01700000 0 0x1f300>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sdm670-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + tlmm: pinctrl@3400000 { + compatible = "qcom,sdm670-tlmm"; + reg = <0 0x03400000 0 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio17", "gpio18"; + function = "qup1"; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio27", "gpio28"; + function = "qup2"; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio41", "gpio42"; + function = "qup3"; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio89", "gpio90"; + function = "qup4"; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio85", "gpio86"; + function = "qup5"; + }; + + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio45", "gpio46"; + function = "qup6"; + }; + + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio93", "gpio94"; + function = "qup7"; + }; + + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio65", "gpio66"; + function = "qup8"; + }; + + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio6", "gpio7"; + function = "qup9"; + }; + + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio55", "gpio56"; + function = "qup10"; + }; + + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio31", "gpio32"; + function = "qup11"; + }; + + qup_i2c12_default: qup-i2c12-default-state { + pins = "gpio49", "gpio50"; + function = "qup12"; + }; + + qup_i2c13_default: qup-i2c13-default-state { + pins = "gpio105", "gpio106"; + function = "qup13"; + }; + + qup_i2c14_default: qup-i2c14-default-state { + pins = "gpio33", "gpio34"; + function = "qup14"; + }; + + qup_i2c15_default: qup-i2c15-default-state { + pins = "gpio81", "gpio82"; + function = "qup15"; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + }; + + usb_1_hsphy: phy@88e2000 { + compatible = "qcom,sdm670-qusb2-phy", "qcom,qusb2-v2-phy"; + reg = <0 0x088e2000 0 0x400>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + nvmem-cells = <&qusb2_hstx_trim>; + + status = "disabled"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sdm670-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre2_noc MASTER_USB3 0 &mem_noc SLAVE_EBI_CH0 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x740 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; + }; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; + }; + + gladiator_noc: interconnect@17900000 { + compatible = "qcom,sdm670-gladiator-noc"; + reg = <0 0x17900000 0 0xd080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + apps_rsc: rsc@179c0000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x179c0000 0 0x10000>, + <0 0x179d0000 0 0x10000>, + <0 0x179e0000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sdm670-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sdm670-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index b5eb8f7eca1d..d05c511718df 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -16,7 +16,7 @@ / { aliases { bluetooth0 = &bluetooth; - hsuart0 = &uart6; + serial1 = &uart6; serial0 = &uart9; wifi0 = &wifi; }; @@ -135,11 +135,9 @@ backlight = <&backlight>; no-hpd; - ports { - panel_in: port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; }; }; }; @@ -319,8 +317,9 @@ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; + pinctrl-1 = <&qspi_sleep>; flash@0 { compatible = "jedec,spi-nor"; @@ -339,7 +338,7 @@ &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -621,7 +620,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -756,8 +755,8 @@ ap_ts_i2c: &i2c14 { }; &ipa { + qcom,gsi-loader = "modem"; status = "okay"; - modem-init; }; &lpasscc { @@ -860,7 +859,9 @@ ap_ts_i2c: &i2c14 { &uart6 { status = "okay"; - bluetooth: wcn3990-bt { + pinctrl-0 = <&qup_uart6_4pin>; + + bluetooth: bluetooth { compatible = "qcom,wcn3990-bt"; vddio-supply = <&src_pp1800_s4a>; vddxo-supply = <&pp1800_l7a_wcn3990>; @@ -993,143 +994,76 @@ ap_ts_i2c: &i2c14 { /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qspi_cs0 { - pinconf { - pins = "gpio90"; - bias-disable; - }; + bias-disable; /* External pullup */ }; &qspi_clk { - pinconf { - pins = "gpio95"; - bias-disable; - }; + bias-disable; /* Rely on Cr50 internal pulldown */ }; -&qspi_data01 { - pinconf { - pins = "gpio91", "gpio92"; +&qspi_data0 { + bias-disable; /* Rely on Cr50 internal pulldown */ +}; - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; - }; +&qspi_data1 { + bias-pull-down; }; &qup_i2c3_default { - pinconf { - pins = "gpio41", "gpio42"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c11_default { - pinconf { - pins = "gpio31", "gpio32"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c12_default { - pinconf { - pins = "gpio49", "gpio50"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_i2c14_default { - pinconf { - pins = "gpio33", "gpio34"; - drive-strength = <2>; + drive-strength = <2>; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; &qup_spi0_default { - pinconf { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_spi5_default { - pinconf { - pins = "gpio85", "gpio86", "gpio87", "gpio88"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_spi10_default { - pinconf { - pins = "gpio53", "gpio54", "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; -&qup_uart6_default { - /* Change pinmux to all 4 pins since CTS and RTS are connected */ - pinmux { - pins = "gpio45", "gpio46", - "gpio47", "gpio48"; - }; - - pinconf-cts { - /* - * Configure a pull-down on 45 (CTS) to match the pull of - * the Bluetooth module. - */ - pins = "gpio45"; - bias-pull-down; - }; - - pinconf-rts-tx { - /* We'll drive 46 (RTS) and 47 (TX), so no pull */ - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - pinconf-rx { - /* - * Configure a pull-up on 48 (RX). This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ - pins = "gpio48"; - bias-pull-up; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; }; -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; - - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; /* PINCTRL - board-specific pinctrl */ -&pm8005_gpio { +&pm8005_gpios { gpio-line-names = "", "", "SLB", @@ -1163,7 +1097,7 @@ ap_ts_i2c: &i2c14 { }; }; -&pm8998_gpio { +&pm8998_gpios { gpio-line-names = "", "", "SW_CTRL", @@ -1213,243 +1147,166 @@ ap_ts_i2c: &i2c14 { output-low; }; - ap_edp_bklten: ap-edp-bklten { - pinmux { - pins = "gpio37"; - function = "gpio"; - }; - - pinconf { - pins = "gpio37"; - drive-strength = <2>; - bias-disable; - }; + ap_edp_bklten: ap-edp-bklten-state { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - bios_flash_wp_r_l: bios-flash-wp-r-l { - pinmux { - pins = "gpio128"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio128"; - bias-disable; - }; + bios_flash_wp_r_l: bios-flash-wp-r-l-state { + pins = "gpio128"; + function = "gpio"; + bias-disable; }; - ec_ap_int_l: ec-ap-int-l { - pinmux { - pins = "gpio122"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio122"; - bias-pull-up; - }; + ec_ap_int_l: ec-ap-int-l-state { + pins = "gpio122"; + function = "gpio"; + bias-pull-up; }; - edp_brij_en: edp-brij-en { - pinmux { - pins = "gpio102"; - function = "gpio"; - }; - - pinconf { - pins = "gpio102"; - drive-strength = <2>; - bias-disable; - }; + edp_brij_en: edp-brij-en-state { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - edp_brij_irq: edp-brij-irq { - pinmux { - pins = "gpio10"; - function = "gpio"; - }; - - pinconf { - pins = "gpio10"; - drive-strength = <2>; - bias-pull-down; - }; + edp_brij_irq: edp-brij-irq-state { + pins = "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; - en_pp3300_dx_edp: en-pp3300-dx-edp { - pinmux { - pins = "gpio43"; - function = "gpio"; - }; - - pinconf { - pins = "gpio43"; - drive-strength = <2>; - bias-disable; - }; + en_pp3300_dx_edp: en-pp3300-dx-edp-state { + pins = "gpio43"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - h1_ap_int_odl: h1-ap-int-odl { - pinmux { - pins = "gpio129"; - function = "gpio"; - input-enable; - }; - - pinconf { - pins = "gpio129"; - bias-pull-up; - }; + h1_ap_int_odl: h1-ap-int-odl-state { + pins = "gpio129"; + function = "gpio"; + bias-pull-up; }; - pen_eject_odl: pen-eject-odl { - pinmux { - pins = "gpio119"; - function = "gpio"; - bias-pull-up; - }; + pen_eject_odl: pen-eject-odl-state { + pins = "gpio119"; + function = "gpio"; + bias-pull-up; }; - pen_irq_l: pen-irq-l { - pinmux { - pins = "gpio24"; - function = "gpio"; - }; + pen_irq_l: pen-irq-l-state { + pins = "gpio24"; + function = "gpio"; - pinconf { - pins = "gpio24"; - - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; - pen_pdct_l: pen-pdct-l { - pinmux { - pins = "gpio63"; - function = "gpio"; - }; - - pinconf { - pins = "gpio63"; + pen_pdct_l: pen-pdct-l-state { + pins = "gpio63"; + function = "gpio"; - /* Has external pullup */ - bias-disable; - }; + /* Has external pullup */ + bias-disable; }; - pen_rst_l: pen-rst-l { - pinmux { - pins = "gpio23"; - function = "gpio"; - }; - - pinconf { - pins = "gpio23"; - bias-disable; - drive-strength = <2>; + pen_rst_l: pen-rst-l-state { + pins = "gpio23"; + function = "gpio"; + bias-disable; + drive-strength = <2>; - /* - * The pen driver doesn't currently support - * driving this reset line. By specifying - * output-high here we're relying on the fact - * that this pin has a default pulldown at boot - * (which makes sure the pen was in reset if it - * was powered) and then we set it high here to - * take it out of reset. Better would be if the - * pen driver could control this and we could - * remove "output-high" here. - */ - output-high; - }; + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; }; - sdc2_clk: sdc2-clk { - pinconf { - pins = "sdc2_clk"; - bias-disable; + qspi_sleep: qspi-sleep-state { + pins = "gpio90", "gpio91", "gpio92", "gpio95"; - /* - * It seems that mmc_test reports errors if drive - * strength is not 16. - */ - drive-strength = <16>; - }; + /* + * When we're not actively transferring we want pins as GPIOs + * with output disabled so that the quad SPI IP block stops + * driving them. We rely on the normal pulls configured in + * the active state and don't redefine them here. Also note + * that we don't need the reverse (output-enable) in the + * normal mode since the "output-enable" only matters for + * GPIO function. + */ + function = "gpio"; + output-disable; }; - sdc2_cmd: sdc2-cmd { - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; - }; + sdc2_clk: sdc2-clk-state { + pins = "sdc2_clk"; + bias-disable; - sdc2_data: sdc2-data { - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; + /* + * It seems that mmc_test reports errors if drive + * strength is not 16. + */ + drive-strength = <16>; }; - sd_cd_odl: sd-cd-odl { - pinmux { - pins = "gpio44"; - function = "gpio"; - }; - - pinconf { - pins = "gpio44"; - bias-pull-up; - }; + sdc2_cmd: sdc2-cmd-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; }; - ts_int_l: ts-int-l { - pinmux { - pins = "gpio125"; - function = "gpio"; - }; + sdc2_data: sdc2-data-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; - pinconf { - pins = "gpio125"; - bias-pull-up; - }; + sd_cd_odl: sd-cd-odl-state { + pins = "gpio44"; + function = "gpio"; + bias-pull-up; }; - ts_reset_l: ts-reset-l { - pinmux { - pins = "gpio118"; - function = "gpio"; - }; + ts_int_l: ts-int-l-state { + pins = "gpio125"; + function = "gpio"; + bias-pull-up; + }; - pinconf { - pins = "gpio118"; - bias-disable; - drive-strength = <2>; - }; + ts_reset_l: ts-reset-l-state { + pins = "gpio118"; + function = "gpio"; + bias-disable; + drive-strength = <2>; }; - ap_suspend_l_assert: ap_suspend_l_assert { - config { - pins = "gpio126"; - function = "gpio"; - bias-no-pull; - drive-strength = <2>; - output-low; - }; + ap_suspend_l_assert: ap-suspend-l-assert-state { + pins = "gpio126"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; }; - ap_suspend_l_deassert: ap_suspend_l_deassert { - config { - pins = "gpio126"; - function = "gpio"; - bias-no-pull; - drive-strength = <2>; - output-high; - }; + ap_suspend_l_deassert: ap-suspend-l-deassert-state { + pins = "gpio126"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-high; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts new file mode 100644 index 000000000000..a21caa6f3fa2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022, Linaro Ltd. + */ + +/dts-v1/; + +#include "sdm845-db845c.dts" + +&camss { + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; + + status = "okay"; + + ports { + port@0 { + csiphy0_ep: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&ov8856_ep>; + }; + }; + }; +}; + +&cci { + status = "okay"; +}; + +&cci_i2c0 { + camera@10 { + compatible = "ovti,ov8856"; + reg = <0x10>; + + /* CAM0_RST_N */ + reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_default>; + + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "xvclk"; + clock-frequency = <19200000>; + + /* + * The &vreg_s4a_1p8 trace is powered on as a, + * so it is represented by a fixed regulator. + * + * The 2.8V vdda-supply and 1.2V vddd-supply regulators + * both have to be enabled through the power management + * gpios. + */ + dovdd-supply = <&vreg_lvs1a_1p8>; + avdd-supply = <&cam0_avdd_2v8>; + dvdd-supply = <&cam0_dvdd_1v2>; + + port { + ov8856_ep: endpoint { + link-frequencies = /bits/ 64 + <360000000 180000000>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; +}; + +&cci_i2c1 { + camera@60 { + compatible = "ovti,ov7251"; + + /* I2C address as per ov7251.txt linux documentation */ + reg = <0x60>; + + /* CAM3_RST_N */ + enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam3_default>; + + clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; + clock-names = "xclk"; + clock-frequency = <24000000>; + + /* + * The &vreg_s4a_1p8 trace always powered on. + * + * The 2.8V vdda-supply regulator is enabled when the + * vreg_s4a_1p8 trace is pulled high. + * It too is represented by a fixed regulator. + * + * No 1.2V vddd-supply regulator is used. + */ + vdddo-supply = <&vreg_lvs1a_1p8>; + vdda-supply = <&cam3_avdd_2v8>; + + status = "disabled"; + + port { + ov7251_ep: endpoint { + data-lanes = <0 1>; +/* remote-endpoint = <&csiphy3_ep>; */ + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 132417e2d11e..e14fe9bbb386 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -11,6 +11,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> #include "sdm845.dtsi" +#include "sdm845-wcd9340.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" @@ -22,7 +23,7 @@ aliases { serial0 = &uart9; - hsuart0 = &uart6; + serial1 = &uart6; }; chosen { @@ -54,7 +55,7 @@ key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; }; }; @@ -65,7 +66,7 @@ label = "green:user4"; function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_GREEN>; - gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>; linux,default-trigger = "panic-indicator"; default-state = "off"; }; @@ -74,7 +75,7 @@ label = "yellow:wlan"; function = LED_FUNCTION_WLAN; color = <LED_COLOR_ID_YELLOW>; - gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; }; @@ -83,7 +84,7 @@ label = "blue:bt"; function = LED_FUNCTION_BLUETOOTH; color = <LED_COLOR_ID_BLUE>; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power"; default-state = "off"; }; @@ -120,9 +121,11 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - // TODO: make it possible to drive same GPIO from two clients - // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; - // enable-active-high; + /* + * TODO: make it possible to drive same GPIO from two clients + * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ }; pcie0_1p05v: pcie-0-1p05v-regulator { @@ -133,37 +136,39 @@ regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; - // TODO: make it possible to drive same GPIO from two clients - // gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; - // enable-active-high; + /* + * TODO: make it possible to drive same GPIO from two clients + * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ }; - cam0_dvdd_1v2: reg_cam0_dvdd_1v2 { + cam0_dvdd_1v2: cam0-dvdd-1v2-regulator { compatible = "regulator-fixed"; regulator-name = "CAM0_DVDD_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; enable-active-high; - gpio = <&pm8998_gpio 12 GPIO_ACTIVE_HIGH>; + gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam0_dvdd_1v2_en_default>; vin-supply = <&vbat>; }; - cam0_avdd_2v8: reg_cam0_avdd_2v8 { + cam0_avdd_2v8: cam0-avdd-2v8-regulator { compatible = "regulator-fixed"; regulator-name = "CAM0_AVDD_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; enable-active-high; - gpio = <&pm8998_gpio 10 GPIO_ACTIVE_HIGH>; + gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam0_avdd_2v8_en_default>; vin-supply = <&vbat>; }; /* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */ - cam3_avdd_2v8: reg_cam3_avdd_2v8 { + cam3_avdd_2v8: cam3-avdd-2v8-regulator { compatible = "regulator-fixed"; regulator-name = "CAM3_AVDD_2V8"; regulator-min-microvolt = <2800000>; @@ -195,9 +200,11 @@ regulator-min-microvolt = <500000>; regulator-max-microvolt = <500000>; - // TODO: make it possible to drive same GPIO from two clients - // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; - // enable-active-high; + /* + * TODO: make it possible to drive same GPIO from two clients + * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ }; vbat: vbat-regulator { @@ -263,7 +270,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; vdd-s1-supply = <&vph_pwr>; @@ -388,7 +395,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -500,14 +507,12 @@ &i2c11 { /* On Low speed expansion */ clock-frequency = <100000>; - label = "LS-I2C1"; status = "okay"; }; &i2c14 { /* On Low speed expansion */ clock-frequency = <100000>; - label = "LS-I2C0"; status = "okay"; }; @@ -553,7 +558,7 @@ vdda-pll-supply = <&vreg_l26a_1p2>; }; -&pm8998_gpio { +&pm8998_gpios { gpio-line-names = "NC", "NC", @@ -609,14 +614,9 @@ }; }; -&pm8998_pon { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &pmi8998_lpg { @@ -649,9 +649,13 @@ }; }; +&pmi8998_rradc { + status = "okay"; +}; + /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { - qi2s@22 { + dai@22 { reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0 1 2 3>; }; @@ -699,7 +703,7 @@ }; &sound { - compatible = "qcom,db845c-sndcard"; + compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard"; pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active @@ -815,13 +819,12 @@ &spi2 { /* On Low speed expansion */ - label = "LS-SPI0"; status = "okay"; }; &tlmm { - cam0_default: cam0_default { - rst { + cam0_default: cam0-default-state { + rst-pins { pins = "gpio9"; function = "gpio"; @@ -829,7 +832,7 @@ bias-disable; }; - mclk0 { + mclk0-pins { pins = "gpio13"; function = "cam_mclk"; @@ -838,8 +841,8 @@ }; }; - cam3_default: cam3_default { - rst { + cam3_default: cam3-default-state { + rst-pins { function = "gpio"; pins = "gpio21"; @@ -847,7 +850,7 @@ bias-disable; }; - mclk3 { + mclk3-pins { function = "cam_mclk"; pins = "gpio16"; @@ -856,7 +859,7 @@ }; }; - dsi_sw_sel: dsi-sw-sel { + dsi_sw_sel: dsi-sw-sel-state { pins = "gpio120"; function = "gpio"; @@ -865,20 +868,20 @@ output-high; }; - lt9611_irq_pin: lt9611-irq { + lt9611_irq_pin: lt9611-irq-state { pins = "gpio84"; function = "gpio"; bias-disable; }; - pcie0_default_state: pcie0-default { - clkreq { + pcie0_default_state: pcie0-default-state { + clkreq-pins { pins = "gpio36"; function = "pci_e0"; bias-pull-up; }; - reset-n { + reset-n-pins { pins = "gpio35"; function = "gpio"; @@ -887,7 +890,7 @@ bias-pull-down; }; - wake-n { + wake-n-pins { pins = "gpio37"; function = "gpio"; @@ -896,7 +899,7 @@ }; }; - pcie0_pwren_state: pcie0-pwren { + pcie0_pwren_state: pcie0-pwren-state { pins = "gpio90"; function = "gpio"; @@ -904,8 +907,8 @@ bias-disable; }; - pcie1_default_state: pcie1-default { - perst-n { + pcie1_default_state: pcie1-default-state { + perst-n-pins { pins = "gpio102"; function = "gpio"; @@ -913,13 +916,13 @@ bias-disable; }; - clkreq { + clkreq-pins { pins = "gpio103"; function = "pci_e1"; bias-pull-up; }; - wake-n { + wake-n-pins { pins = "gpio11"; function = "gpio"; @@ -927,7 +930,7 @@ bias-pull-up; }; - reset-n { + reset-n-pins { pins = "gpio75"; function = "gpio"; @@ -937,8 +940,8 @@ }; }; - sdc2_default_state: sdc2-default { - clk { + sdc2_default_state: sdc2-default-state { + clk-pins { pins = "sdc2_clk"; bias-disable; @@ -949,43 +952,38 @@ drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; - sdc2_card_det_n: sd-card-det-n { + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio126"; function = "gpio"; bias-pull-up; }; - - wcd_intr_default: wcd_intr_default { - pins = <54>; - function = "gpio"; - - input-enable; - bias-pull-down; - drive-strength = <2>; - }; }; &uart3 { label = "LS-UART0"; + pinctrl-0 = <&qup_uart3_4pin>; + status = "disabled"; }; &uart6 { status = "okay"; + pinctrl-0 = <&qup_uart6_4pin>; + bluetooth { compatible = "qcom,wcn3990-bt"; @@ -1076,11 +1074,7 @@ status = "okay"; }; -&wcd9340{ - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; +&wcd9340 { reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; @@ -1089,7 +1083,7 @@ vdd-io-supply = <&vreg_s4a_1p8>; swm: swm@c85 { - left_spkr: wsa8810-left{ + left_spkr: speaker@0,1 { compatible = "sdw10217201000"; reg = <0 1>; powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; @@ -1098,7 +1092,7 @@ #sound-dai-cells = <0>; }; - right_spkr: wsa8810-right{ + right_spkr: speaker@0,2 { compatible = "sdw10217201000"; powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; reg = <0 2>; @@ -1126,165 +1120,23 @@ drive-strength = <16>; }; -&qup_uart3_default{ - pinmux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "qup3"; - }; -}; - &qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; -}; - -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-disable; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; - -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; - - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; -}; - -&pm8998_gpio { - -}; - -&cci { - status = "okay"; -}; - -&camss { - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l26a_1p2>; - - status = "ok"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - csiphy0_ep: endpoint { - data-lanes = <0 1 2 3>; - remote-endpoint = <&ov8856_ep>; - }; - }; - }; + drive-strength = <2>; + bias-disable; }; -&cci_i2c0 { - camera@10 { - compatible = "ovti,ov8856"; - reg = <0x10>; - - // CAM0_RST_N - reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&cam0_default>; - - clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; - clock-names = "xvclk"; - clock-frequency = <19200000>; - - /* The &vreg_s4a_1p8 trace is powered on as a, - * so it is represented by a fixed regulator. - * - * The 2.8V vdda-supply and 1.2V vddd-supply regulators - * both have to be enabled through the power management - * gpios. - */ - dovdd-supply = <&vreg_lvs1a_1p8>; - avdd-supply = <&cam0_avdd_2v8>; - dvdd-supply = <&cam0_dvdd_1v2>; - - status = "ok"; - - port { - ov8856_ep: endpoint { - link-frequencies = /bits/ 64 - <360000000 180000000>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csiphy0_ep>; - }; - }; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; }; -&cci_i2c1 { - camera@60 { - compatible = "ovti,ov7251"; - - // I2C address as per ov7251.txt linux documentation - reg = <0x60>; - - // CAM3_RST_N - enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cam3_default>; - - clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; - clock-names = "xclk"; - clock-frequency = <24000000>; - - /* The &vreg_s4a_1p8 trace always powered on. - * - * The 2.8V vdda-supply regulator is enabled when the - * vreg_s4a_1p8 trace is pulled high. - * It too is represented by a fixed regulator. - * - * No 1.2V vddd-supply regulator is used. - */ - vdddo-supply = <&vreg_lvs1a_1p8>; - vdda-supply = <&cam3_avdd_2v8>; - - status = "disable"; - - port { - ov7251_ep: endpoint { - data-lanes = <0 1>; -// remote-endpoint = <&csiphy3_ep>; - }; - }; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi0_default { - config { - drive-strength = <6>; - bias-disable; - }; + drive-strength = <6>; + bias-disable; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi index 20f275f8694d..f942c5afea9b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -132,7 +132,7 @@ key-vol-up { label = "Volume up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; }; }; @@ -166,7 +166,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -419,7 +419,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -433,7 +433,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -474,22 +474,17 @@ }; &ipa { + qcom,gsi-loader = "modem"; status = "okay"; - modem-init; }; &mss_pil { status = "okay"; }; -&pm8998_pon { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &sdhc_2 { @@ -558,53 +553,41 @@ &tlmm { gpio-reserved-ranges = <28 4>, <81 4>; - sdc2_clk: sdc2-clk { - pinconf { - pins = "sdc2_clk"; - bias-disable; - - /* - * It seems that mmc_test reports errors if drive - * strength is not 16 on clk, cmd, and data pins. - * - * TODO: copy-pasted from mtp, try other values - * on these devices. - */ - drive-strength = <16>; - }; + sdc2_clk: sdc2-clk-state { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + * + * TODO: copy-pasted from mtp, try other values + * on these devices. + */ + drive-strength = <16>; }; - sdc2_cmd: sdc2-cmd { - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_cmd: sdc2-cmd-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; }; - sdc2_data: sdc2-data { - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_data: sdc2-data-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; }; - sd_card_det_n: sd-card-det-n { - pinmux { - pins = "gpio126"; - function = "gpio"; - }; - - pinconf { - pins = "gpio126"; - bias-pull-up; - }; + sd_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; }; }; -&pm8998_gpio { - vol_up_pin_a: vol-up-active-pins { +&pm8998_gpios { + vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; input-enable; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts index 7d967a104b3e..a12723310c8b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts @@ -58,7 +58,7 @@ }; &tlmm { - thinq_key_default: thinq-key-default { + thinq_key_default: thinq-key-default-state { pins = "gpio89"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index de2d10e0315a..d1440b790fa6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -117,7 +117,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -382,7 +382,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -396,7 +396,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -518,8 +518,9 @@ }; &ipa { - status = "okay"; + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; + status = "okay"; }; &mdss { @@ -719,68 +720,49 @@ /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - sdc2_clk: sdc2-clk { - pinconf { - pins = "sdc2_clk"; - bias-disable; + sdc2_clk: sdc2-clk-state { + pins = "sdc2_clk"; + bias-disable; - /* - * It seems that mmc_test reports errors if drive - * strength is not 16 on clk, cmd, and data pins. - */ - drive-strength = <16>; - }; + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; }; - sdc2_cmd: sdc2-cmd { - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_cmd: sdc2-cmd-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; }; - sdc2_data: sdc2-data { - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; + sdc2_data: sdc2-data-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; }; - sd_card_det_n: sd-card-det-n { - pinmux { - pins = "gpio126"; - function = "gpio"; - }; - - pinconf { - pins = "gpio126"; - bias-pull-up; - }; + sd_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 392461c29e76..5c384345c05d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -9,8 +9,11 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include "sdm845.dtsi" +#include "sdm845-wcd9340.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" @@ -19,13 +22,30 @@ / { aliases { serial0 = &uart9; - hsuart0 = &uart6; + serial1 = &uart6; }; chosen { stdout-path = "serial0:115200n8"; }; + gpio-hall-sensor { + compatible = "gpio-keys"; + label = "Hall effect sensor"; + + pinctrl-0 = <&hall_sensor_default>; + pinctrl-names = "default"; + + event-hall-sensor { + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + label = "Hall Effect Sensor"; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + }; + gpio-keys { compatible = "gpio-keys"; label = "Volume keys"; @@ -37,20 +57,21 @@ key-vol-down { label = "Volume down"; linux,code = <KEY_VOLUMEDOWN>; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; key-vol-up { label = "Volume up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; }; reserved-memory { - /* The rmtfs_mem needs to be guarded due to "XPU limitations" + /* + * The rmtfs_mem needs to be guarded due to "XPU limitations" * it is otherwise possible for an allocation adjacent to the * rmtfs_mem region to trigger an XPU violation, causing a crash. */ @@ -144,7 +165,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -280,7 +301,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -294,7 +315,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -326,8 +347,6 @@ display_panel: panel@0 { status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; vddio-supply = <&vreg_l14a_1p88>; @@ -423,23 +442,23 @@ }; &ipa { - status = "okay"; - + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn"; + status = "okay"; }; &mdss { status = "okay"; }; -/* Modem/wifi*/ +/* Modem/wifi */ &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; }; -&pm8998_gpio { +&pm8998_gpios { volume_down_gpio: pm8998-gpio5-state { pinconf { pins = "gpio5"; @@ -461,6 +480,48 @@ }; }; +&pmi8998_rradc { + status = "okay"; +}; + +&q6afedai { + qi2s@22 { + reg = <22>; + qcom,sd-lines = <1>; + }; + + qi2s@23 { + reg = <23>; + qcom,sd-lines = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; + + dai@3 { + reg = <3>; + }; + + dai@4 { + reg = <4>; + }; + + dai@5 { + reg = <5>; + }; +}; + &qupv3_id_1 { status = "okay"; }; @@ -469,66 +530,171 @@ status = "okay"; }; +&qup_i2c10_default { + drive-strength = <2>; + bias-disable; +}; + &qup_i2c12_default { - mux { - pins = "gpio49", "gpio50"; - function = "qup12"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; -&qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; }; -&qup_uart9_default { - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; +}; + +&slpi_pas { + firmware-name = "qcom/sdm845/oneplus6/slpi.mbn"; + status = "okay"; +}; + +&sound { + compatible = "qcom,sdm845-sndcard"; + pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>; + pinctrl-names = "default"; + status = "okay"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; }; - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; }; -}; -/* - * Prevent garbage data on bluetooth UART lines - */ -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; }; - cts { - pins = "gpio45"; - bias-pull-down; + mm4-dai-link { + link-name = "MultiMedia4"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; + }; }; - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; + mm5-dai-link { + link-name = "MultiMedia5"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>; + }; }; - rx { - pins = "gpio48"; - bias-pull-up; + mm6-dai-link { + link-name = "MultiMedia6"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>; + }; + }; + + speaker_playback_dai: speaker-dai-link { + link-name = "Speaker Playback"; + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback 1"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture 1"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; + + slim2-dai-link { + link-name = "SLIM Playback 2"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 2>; /* AIF2_PB */ + }; + }; + + slimcap2-dai-link { + link-name = "SLIM Capture 2"; + cpu { + sound-dai = <&q6afedai SLIMBUS_1_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 3>; /* AIF2_CAP */ + }; + }; + + slimcap3-dai-link { + link-name = "SLIM Capture 3"; + cpu { + sound-dai = <&q6afedai SLIMBUS_2_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 5>; /* AIF3_CAP */ + }; }; }; &uart6 { status = "okay"; + pinctrl-0 = <&qup_uart6_4pin>; + bluetooth { compatible = "qcom,wcn3990-bt"; @@ -607,51 +773,54 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - tri_state_key_default: tri_state_key_default { - mux { - pins = "gpio40", "gpio42", "gpio26"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; + hall_sensor_default: hall-sensor-default-state { + pins = "gpio124"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - ts_default_pins: ts-int { - mux { - pins = "gpio99", "gpio125"; - function = "gpio"; - drive-strength = <16>; - bias-pull-up; - }; + tri_state_key_default: tri-state-key-default-state { + pins = "gpio40", "gpio42", "gpio26"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - panel_reset_pins: panel-reset { - mux { - pins = "gpio6", "gpio25", "gpio26"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; + ts_default_pins: ts-int-state { + pins = "gpio99", "gpio125"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; }; - panel_te_pin: panel-te { - mux { - pins = "gpio10"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-disable; - input-enable; - }; + panel_reset_pins: panel-reset-state { + pins = "gpio6", "gpio25", "gpio26"; + function = "gpio"; + drive-strength = <8>; + bias-disable; }; - panel_esd_pin: panel-esd { - mux { - pins = "gpio30"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; + panel_te_pin: panel-te-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + + panel_esd_pin: panel-esd-state { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + speaker_default: speaker-default-state { + pins = "gpio69"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + output-high; }; }; @@ -660,6 +829,17 @@ firmware-name = "qcom/sdm845/oneplus6/venus.mbn"; }; +&wcd9340 { + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; +}; + &wifi { status = "okay"; vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index bf2cf92e8976..6cdda971bb4b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -32,3 +32,43 @@ &bq27441_fg { monitored-battery = <&battery>; }; + +&i2c4 { + status = "okay"; + + max98927_codec: max98927@3a { + compatible = "maxim,max98927"; + reg = <0x3a>; + #sound-dai-cells = <1>; + + pinctrl-0 = <&speaker_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; + + vmon-slot-no = <1>; + imon-slot-no = <0>; + }; +}; + +&sound { + model = "OnePlus 6"; + audio-routing = "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS4", + "AMIC4", "MIC BIAS1", + "AMIC5", "MIC BIAS4"; +}; + +&speaker_playback_dai { + codec { + sound-dai = <&max98927_codec 0>; + }; +}; + +&wcd9340 { + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <2700000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 1b6b5bf368df..d82c0d4407f0 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -29,10 +29,38 @@ compatible = "samsung,s6e3fc2x01"; }; +&i2c4 { + /* nxp,tfa9894 @ 0x34 */ +}; + &bq27441_fg { monitored-battery = <&battery>; }; +&sound { + model = "OnePlus 6T"; + audio-routing = "RX_BIAS", "MCLK", + "AMIC1", "MIC BIAS3", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS4", + "AMIC4", "MIC BIAS1", + "AMIC5", "MIC BIAS3"; +}; + +/* + * The TFA9894 codec is currently unsupported. + * We need to delete the node to allow the soundcard + * to probe for headphones/earpiece. + */ +/delete-node/ &speaker_playback_dai; + &rmi4_f12 { touchscreen-y-mm = <148>; }; + +&wcd9340 { + qcom,micbias1-microvolt = <2700000>; + qcom,micbias2-microvolt = <2700000>; + qcom,micbias3-microvolt = <2700000>; + qcom,micbias4-microvolt = <2700000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts new file mode 100644 index 000000000000..d37a433130b9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts @@ -0,0 +1,460 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" + +/ { + chassis-type = "handset"; + model = "Samsung Galaxy S9 SM-G9600"; + compatible = "samsung,starqltechn", "qcom,sdm845"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + framebuffer: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000 + width = <1440>; + height = <2960>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x02400000>; + no-map; + }; + + memory@a1300000 { + compatible = "ramoops"; + reg = <0x0 0xa1300000 0x0 0x100000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x40000>; + }; + }; +}; + + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&i2c10 { + clock-frequency = <400000>; + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; + status = "okay"; +}; + +&sdhc_2 { + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* Until we have Type C hooked up we'll force this as peripheral. */ + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; + status = "okay"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>; + + sdc2_clk_state: sdc2-clk-state { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + + sdc2_cmd_state: sdc2-cmd-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + + sdc2_data_state: sdc2-data-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + + sd_card_det_n_state: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 83261c9bb4f2..0ad891348e0c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -23,6 +23,7 @@ aliases { display0 = &framebuffer0; serial0 = &uart9; + serial1 = &uart6; }; chosen { @@ -53,7 +54,7 @@ key-vol-up { label = "volume_up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; }; @@ -110,7 +111,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -375,7 +376,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -389,7 +390,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -494,10 +495,10 @@ }; &ipa { - status = "okay"; - + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn"; + status = "okay"; }; &mdss { @@ -509,7 +510,7 @@ firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn"; }; -&pm8998_gpio { +&pm8998_gpios { volume_up_gpio: pm8998-gpio6-state { pinconf { pins = "gpio6"; @@ -521,14 +522,9 @@ }; }; -&pm8998_pon { - volume_down_resin: resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &pmi8998_lpg { @@ -558,18 +554,14 @@ }; }; -&qup_uart9_default { - pinconf-rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; - pinconf-tx { - pins = "gpio4"; - drive-strength = <2>; - bias-disable; - }; +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; }; &qupv3_id_0 { @@ -580,122 +572,85 @@ status = "okay"; }; +&slpi_pas { + firmware-name = "qcom/sdm845/axolotl/slpi.mbn"; + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - sde_dsi_active: sde-dsi-active { - mux { - pins = "gpio6", "gpio11"; - function = "gpio"; - }; - - config { - pins = "gpio6", "gpio11"; - drive-strength = <8>; - bias-disable; - }; + sde_dsi_active: sde-dsi-active-state { + pins = "gpio6", "gpio11"; + function = "gpio"; + drive-strength = <8>; + bias-disable; }; - sde_dsi_suspend: sde-dsi-suspend { - mux { - pins = "gpio6", "gpio11"; - function = "gpio"; - }; - - config { - pins = "gpio6", "gpio11"; - drive-strength = <2>; - bias-pull-down; - }; + sde_dsi_suspend: sde-dsi-suspend-state { + pins = "gpio6", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; - sde_te_active: sde-te-active { - mux { - pins = "gpio10"; - function = "mdp_vsync"; - }; - - config { - pins = "gpio10"; - drive-strength = <2>; - bias-pull-down; - }; + sde_te_active: sde-te-active-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; }; - sde_te_suspend: sde-te-suspend { - mux { - pins = "gpio10"; - function = "mdp_vsync"; - }; - - config { - pins = "gpio10"; - drive-strength = <2>; - bias-pull-down; - }; + sde_te_suspend: sde-te-suspend-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; }; - ts_int_active: ts-int-active { - mux { - pins = "gpio125"; - function = "gpio"; - }; - - config { - pins = "gpio125"; - drive-strength = <8>; - bias-pull-up; - input-enable; - }; + ts_int_active: ts-int-active-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; }; - ts_int_suspend: ts-int-suspend { - mux { - pins = "gpio125"; - function = "gpio"; - }; - - config { - pins = "gpio125"; - drive-strength = <2>; - bias-pull-down; - input-enable; - }; + ts_int_suspend: ts-int-suspend-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; - ts_reset_active: ts-reset-active { - mux { - pins = "gpio99"; - function = "gpio"; - }; - - config { - pins = "gpio99"; - drive-strength = <8>; - bias-pull-up; - }; + ts_reset_active: ts-reset-active-state { + pins = "gpio99"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; }; - ts_reset_suspend: ts-reset-suspend { - mux { - pins = "gpio99"; - function = "gpio"; - }; - - config { - pins = "gpio99"; - drive-strength = <2>; - bias-pull-down; - }; + ts_reset_suspend: ts-reset-suspend-state { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; }; }; &uart6 { status = "okay"; + pinctrl-0 = <&qup_uart6_4pin>; + bluetooth { compatible = "qcom,wcn3990-bt"; + /* + * This path is relative to the qca/ + * subdir under lib/firmware. + */ + firmware-name = "axolotl/crnv21.bin"; + vddio-supply = <&vreg_s4a_1p8>; vddxo-supply = <&vreg_l7a_1p8>; vddrf-supply = <&vreg_l17a_1p3>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts index 34f84f1f1eb4..d97b7f1e7140 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts @@ -11,3 +11,7 @@ model = "Sony Xperia XZ2"; compatible = "sony,akari-row", "qcom,sdm845"; }; + +&panel { + compatible = "sony,td4353-jdi-tama"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts index 2f5e12deaada..5d2052a0ff69 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts @@ -7,12 +7,57 @@ #include "sdm845-sony-xperia-tama.dtsi" +/* XZ3 uses an Atmel touchscreen instead. */ +/delete-node/ &touchscreen; + / { model = "Sony Xperia XZ3"; compatible = "sony,akatsuki-row", "qcom,sdm845"; + + /* Fixed DCDC for the OLED panel */ + ts_vddio_supply: ts-vddio-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_vddio"; + + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <1840000>; + + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&ibb { + status = "disabled"; +}; + +&lab { + status = "disabled"; +}; + +&panel { + /* Akatsuki uses an OLED panel. */ + /delete-property/ backlight; + /delete-property/ vsp-supply; + /delete-property/ vsn-supply; + /delete-property/ touch-reset-gpios; +}; + +&pmi8998_wled { + status = "disabled"; +}; + +&tlmm { + ts_vddio_en: ts-vddio-en-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; }; -/* For the future: WLED + LAB/IBB/OLEDB are not used on Akatsuki */ &vreg_l14a_1p8 { regulator-min-microvolt = <1840000>; regulator-max-microvolt = <1840000>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts index c9e62c72f60e..cd056f78070f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts @@ -11,3 +11,9 @@ model = "Sony Xperia XZ2 Compact"; compatible = "sony,apollo-row", "qcom,sdm845"; }; + +&panel { + compatible = "sony,td4353-jdi-tama"; + height-mm = <112>; + width-mm = <56>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 51ee42e3c995..420ffede3e80 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" #include "pm8005.dtsi" @@ -17,14 +18,43 @@ gpio-keys { compatible = "gpio-keys"; - /* Neither Camera Focus, nor Camera Shutter seem to work... */ + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>; + pinctrl-names = "default"; - key-vol-down { - label = "volume_down"; - gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + key-camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <15>; - gpio-key,wakeup; + linux,can-disable; + wakeup-source; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; }; }; @@ -68,8 +98,13 @@ }; }; +&adsp_pas { + firmware-name = "qcom/sdm845/Sony/tama/adsp.mbn"; + status = "okay"; +}; + &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -198,6 +233,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-system-load = <62000>; }; vreg_l15a_1p8: ldo15 { @@ -284,6 +320,7 @@ regulator-min-microvolt = <2856000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-system-load = <100000>; }; vreg_lvs1a_1p8: lvs1 { @@ -299,7 +336,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -310,7 +347,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -326,6 +363,48 @@ }; }; +&cdsp_pas { + firmware-name = "qcom/sdm845/Sony/tama/cdsp.mbn"; + status = "okay"; +}; + +&dsi0 { + vdda-supply = <&vreg_l26a_1p2>; + status = "okay"; + + panel: panel@0 { + /* The compatible is assigned in device DTs. */ + reg = <0>; + + backlight = <&pmi8998_wled>; + vddio-supply = <&vreg_l14a_1p8>; + vsp-supply = <&lab>; + vsn-supply = <&ibb>; + panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vdds-supply = <&vreg_l1a_0p9>; + status = "okay"; +}; + &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -334,11 +413,64 @@ <GCC_LPASS_SWAY_CLK>; }; -&i2c5 { +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn"; + }; +}; + +&i2c5 { clock-frequency = <400000>; + status = "okay"; + + touchscreen: touchscreen@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vreg_l14a_1p8>; + /* + * This is a blatant abuse of OF, but the panel driver *needs* + * to probe first, as the power/gpio switching needs to be precisely + * timed in order for both the display and touch panel to function properly. + */ + incell-supply = <&panel>; - /* Synaptics touchscreen @ 2c, 3c */ + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <1000>; + + pinctrl-0 = <&ts_default>; + pinctrl-1 = <&ts_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; }; &i2c10 { @@ -358,6 +490,75 @@ /* AMS TCS3490 RGB+IR color sensor @ 72 */ }; +&ibb { + qcom,discharge-resistor-kohms = <300>; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5700000>; + regulator-min-microamp = <0>; + regulator-max-microamp = <800000>; + regulator-over-current-protection; + regulator-soft-start; + regulator-pull-down; +}; + +&lab { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5700000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-over-current-protection; + regulator-soft-start; + regulator-pull-down; +}; + +&mdss { + status = "okay"; +}; + +&pm8998_gpios { + focus_n: focus-n-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + vol_down_n: vol-down-n-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + snapshot_n: snapshot-n-state { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pmi8998_wled { + default-brightness = <800>; + qcom,switching-freq = <800>; + qcom,ovp-millivolt = <29600>; + qcom,current-boost-limit = <970>; + qcom,current-limit-microamp = <20000>; + qcom,enabled-strings = <0 1 2 3>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -376,31 +577,84 @@ pinctrl-names = "default"; bus-width = <4>; no-sdio; - no-emmc; + no-mmc; }; &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; sdc2_default_state: sdc2-default-state { - clk { + clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <10>; bias-pull-up; }; }; + + sde_dsi_active: sde-dsi-active-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_sleep: sde-dsi-sleep-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_active_sleep: sde-te-active-sleep-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_default: ts-default-state { + reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + int-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + ts_sleep: ts-sleep-state { + reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + int-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; }; &uart6 { @@ -436,3 +690,8 @@ vdda-pll-supply = <&vreg_l12a_1p8>; vdda-phy-dpdm-supply = <&vreg_l24a_3p1>; }; + +&venus { + firmware-name = "qcom/sdm845/Sony/tama/venus.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi new file mode 100644 index 000000000000..c15d48860646 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 SoC device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +&slim { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + wcd9340_ifd: ifd@0,0 { + compatible = "slim217,250"; + reg = <0 0>; + }; + + wcd9340: codec@1,0 { + compatible = "slim217,250"; + reg = <1 0>; + slim-ifc-dev = <&wcd9340_ifd>; + + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + #address-cells = <1>; + #size-cells = <1>; + + wcdgpio: gpio-controller@42 { + compatible = "qcom,wcd9340-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x42 0x2>; + }; + + swm: swm@c85 { + compatible = "qcom,soundwire-v1.3.0"; + reg = <0xc85 0x40>; + interrupts-extended = <&wcd9340 20>; + + qcom,dout-ports = <6>; + qcom,din-ports = <2>; + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>; + + #sound-dai-cells = <1>; + clocks = <&wcd9340>; + clock-names = "iface"; + #address-cells = <2>; + #size-cells = <0>; + }; + }; + }; +}; + +&tlmm { + wcd_intr_default: wcd-intr-default-state { + pins = "gpio54"; + function = "gpio"; + + bias-pull-down; + drive-strength = <2>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 0f470cf1ed1c..5ed975cc6ecb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -2,11 +2,13 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> #include "sdm845.dtsi" +#include "sdm845-wcd9340.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" @@ -26,8 +28,6 @@ /delete-node/ &rmtfs_mem; / { - model = "Xiaomi Pocophone F1"; - compatible = "xiaomi,beryllium", "qcom,sdm845"; chassis-type = "handset"; /* required for bootloader to select correct board */ @@ -35,7 +35,7 @@ qcom,msm-id = <321 0x20001>; aliases { - hsuart0 = &uart6; + serial1 = &uart6; }; gpio-keys { @@ -48,7 +48,7 @@ key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; }; }; @@ -99,6 +99,12 @@ no-map; }; + /* Cont splash region set up by the bootloader */ + cont_splash_mem: framebuffer@9d400000 { + reg = <0 0x9d400000 0 0x2400000>; + no-map; + }; + rmtfs_mem: memory@f6301000 { compatible = "qcom,rmtfs-mem"; reg = <0 0xf6301000 0 0x200000>; @@ -125,7 +131,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -221,21 +227,19 @@ status = "okay"; vdda-supply = <&vreg_l26a_1p2>; - panel@0 { - compatible = "tianma,fhd-video"; + display_panel: panel@0 { reg = <0>; vddio-supply = <&vreg_l14a_1p8>; vddpos-supply = <&lab>; vddneg-supply = <&ibb>; - #address-cells = <1>; - #size-cells = <0>; - backlight = <&pmi8998_wled>; reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + status = "disabled"; + port { - tianma_nt36672a_in_0: endpoint { + panel_in_0: endpoint { remote-endpoint = <&dsi0_out>; }; }; @@ -243,7 +247,7 @@ }; &dsi0_out { - remote-endpoint = <&tianma_nt36672a_in_0>; + remote-endpoint = <&panel_in_0>; data-lanes = <0 1 2 3>; }; @@ -300,12 +304,13 @@ }; &ipa { - status = "okay"; + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; + status = "okay"; }; -&pm8998_gpio { +&pm8998_gpios { vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; @@ -315,6 +320,16 @@ }; }; +&pmi8998_lpg { + status = "okay"; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_STATUS; + }; +}; + &pmi8998_wled { status = "okay"; qcom,current-boost-limit = <970>; @@ -326,19 +341,18 @@ qcom,cabc; }; -&pm8998_pon { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmi8998_rradc { + status = "okay"; }; /* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */ &q6afedai { - qi2s@22 { + dai@22 { reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0>; }; @@ -376,7 +390,7 @@ }; &sound { - compatible = "qcom,db845c-sndcard"; + compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard"; pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active>; pinctrl-names = "default"; @@ -442,45 +456,38 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - sdc2_default_state: sdc2-default { - clk { + sdc2_default_state: sdc2-default-state { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; }; }; - sdc2_card_det_n: sd-card-det-n { + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio126"; function = "gpio"; bias-pull-up; }; - - wcd_intr_default: wcd_intr_default { - pins = <54>; - function = "gpio"; - - input-enable; - bias-pull-down; - drive-strength = <2>; - }; }; &uart6 { status = "okay"; + pinctrl-0 = <&qup_uart6_4pin>; + bluetooth { compatible = "qcom,wcn3990-bt"; @@ -541,11 +548,7 @@ firmware-name = "qcom/sdm845/beryllium/venus.mbn"; }; -&wcd9340{ - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; +&wcd9340 { reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; @@ -567,28 +570,3 @@ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; }; - -/* PINCTRL - additions to nodes defined in sdm845.dtsi */ - -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-disable; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts new file mode 100644 index 000000000000..76931ebad065 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "sdm845-xiaomi-beryllium-common.dtsi" + +/ { + model = "Xiaomi Pocophone F1 (EBBG)"; + compatible = "xiaomi,beryllium-ebbg", "qcom,sdm845"; +}; + +&display_panel { + compatible = "ebbg,ft8719"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts new file mode 100644 index 000000000000..e9427851ebaa --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "sdm845-xiaomi-beryllium-common.dtsi" + +/ { + model = "Xiaomi Pocophone F1 (Tianma)"; + compatible = "xiaomi,beryllium", "qcom,sdm845"; +}; + +&display_panel { + compatible = "tianma,fhd-video", "novatek,nt36672a"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index afc17e4d403f..8ae0ffccaab2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -13,6 +13,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> #include "sdm845.dtsi" +#include "sdm845-wcd9340.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" #include "pm8005.dtsi" @@ -55,7 +56,7 @@ key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; }; @@ -143,7 +144,7 @@ }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -343,7 +344,7 @@ }; }; - pmi8998-rpmh-regulators { + regulators-1 { compatible = "qcom,pmi8998-rpmh-regulators"; qcom,pmic-id = "b"; @@ -355,7 +356,7 @@ }; }; - pm8005-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8005-rpmh-regulators"; qcom,pmic-id = "c"; @@ -449,6 +450,7 @@ }; &ipa { + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; firmware-name = "qcom/sdm845/polaris/ipa_fws.mbn"; status = "okay"; @@ -456,9 +458,6 @@ &i2c14 { clock-frequency = <400000>; - dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, - <&gpi_dma1 1 6 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; status = "okay"; touchscreen@20 { @@ -521,7 +520,7 @@ status = "okay"; }; -&pm8998_gpio { +&pm8998_gpios { volume_up_gpio: pm8998-gpio6-state { pinconf { qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; @@ -533,19 +532,14 @@ }; }; -&pm8998_pon { - resin { - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - compatible = "qcom,pm8941-resin"; - linux,code = <KEY_VOLUMEDOWN>; - debounce = <15625>; - bias-pull-up; - }; +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &q6afedai { - qi2s@22 { - reg = <22>; + dai@22 { + reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0>; }; }; @@ -573,72 +567,61 @@ }; &qup_i2c14_default { - pinconf { - pins = "gpio33", "gpio34"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - ts_reset_default: ts-reset-default { + ts_reset_default: ts-reset-default-state { pins = "gpio99"; function = "gpio"; drive-strength = <16>; output-high; }; - ts_int_default: ts-int-default { + ts_int_default: ts-int-default-state { pins = "gpio125"; function = "gpio"; bias-pull-down; drive-strength = <16>; - input-enable; }; - ts_reset_sleep: ts-reset-sleep { + ts_reset_sleep: ts-reset-sleep-state { pins = "gpio99"; function = "gpio"; bias-disable; drive-strength = <2>; }; - ts_int_sleep: ts-int-sleep { + ts_int_sleep: ts-int-sleep-state { pins = "gpio125"; function = "gpio"; bias-pull-down; drive-strength = <2>; - input-enable; }; - sde_dsi_active: sde-dsi-active { + sde_dsi_active: sde-dsi-active-state { pins = "gpio6", "gpio10"; function = "gpio"; drive-strength = <8>; bias-disable; }; - sde_dsi_suspend: sde-dsi-suspend { + sde_dsi_suspend: sde-dsi-suspend-state { pins = "gpio6", "gpio10"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - - wcd_intr_default: wcd-intr-default { - pins = "goui54"; - function = "gpio"; - input-enable; - bias-pull-down; - drive-strength = <2>; - }; }; &uart6 { status = "okay"; + pinctrl-0 = <&qup_uart6_4pin>; + bluetooth { compatible = "qcom,wcn3990-bt"; @@ -708,10 +691,6 @@ }; &wcd9340 { - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; vdd-buck-supply = <&vreg_s4a_1p8>; @@ -731,32 +710,5 @@ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; - - qcom,snoc-host-cap-skip-quirk; status = "okay"; }; - -/* PINCTRL - additions to nodes defined in sdm845.dtsi */ - -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-disable; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index d761da47220d..cdeb05e95674 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sdm845.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h> @@ -69,122 +70,18 @@ chosen { }; - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the size */ - reg = <0 0x80000000 0 0>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - hyp_mem: hyp-mem@85700000 { - reg = <0 0x85700000 0 0x600000>; - no-map; - }; - - xbl_mem: xbl-mem@85e00000 { - reg = <0 0x85e00000 0 0x100000>; - no-map; - }; - - aop_mem: aop-mem@85fc0000 { - reg = <0 0x85fc0000 0 0x20000>; - no-map; - }; - - aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 { - compatible = "qcom,cmd-db"; - reg = <0x0 0x85fe0000 0 0x20000>; - no-map; - }; - - smem@86000000 { - compatible = "qcom,smem"; - reg = <0x0 0x86000000 0 0x200000>; - no-map; - hwlocks = <&tcsr_mutex 3>; - }; - - tz_mem: tz@86200000 { - reg = <0 0x86200000 0 0x2d00000>; - no-map; - }; - - rmtfs_mem: rmtfs@88f00000 { - compatible = "qcom,rmtfs-mem"; - reg = <0 0x88f00000 0 0x200000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = <15>; - }; - - qseecom_mem: qseecom@8ab00000 { - reg = <0 0x8ab00000 0 0x1400000>; - no-map; - }; - - camera_mem: camera-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x500000>; - no-map; - }; - - ipa_fw_mem: ipa-fw@8c400000 { - reg = <0 0x8c400000 0 0x10000>; - no-map; - }; - - ipa_gsi_mem: ipa-gsi@8c410000 { - reg = <0 0x8c410000 0 0x5000>; - no-map; - }; - - gpu_mem: gpu@8c415000 { - reg = <0 0x8c415000 0 0x2000>; - no-map; - }; - - adsp_mem: adsp@8c500000 { - reg = <0 0x8c500000 0 0x1a00000>; - no-map; - }; - - wlan_msa_mem: wlan-msa@8df00000 { - reg = <0 0x8df00000 0 0x100000>; - no-map; - }; - - mpss_region: mpss@8e000000 { - reg = <0 0x8e000000 0 0x7800000>; - no-map; - }; - - venus_mem: venus@95800000 { - reg = <0 0x95800000 0 0x500000>; - no-map; - }; - - cdsp_mem: cdsp@95d00000 { - reg = <0 0x95d00000 0 0x800000>; - no-map; - }; - - mba_region: mba@96500000 { - reg = <0 0x96500000 0 0x200000>; - no-map; - }; - - slpi_mem: slpi@96700000 { - reg = <0 0x96700000 0 0x1400000>; - no-map; + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; }; - spss_mem: spss@97b00000 { - reg = <0 0x97b00000 0 0x100000>; - no-map; + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; }; }; @@ -196,9 +93,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -209,9 +107,13 @@ next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; L3_0: l3-cache { - compatible = "cache"; + compatible = "cache"; + cache-level = <3>; + cache-unified; }; }; }; @@ -220,9 +122,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -233,6 +136,8 @@ next-level-cache = <&L2_100>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -241,9 +146,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -254,6 +160,8 @@ next-level-cache = <&L2_200>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -262,9 +170,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -275,6 +184,8 @@ next-level-cache = <&L2_300>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -283,6 +194,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -296,6 +208,8 @@ next-level-cache = <&L2_400>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -304,6 +218,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -317,6 +232,8 @@ next-level-cache = <&L2_500>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -325,6 +242,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -338,6 +256,8 @@ next-level-cache = <&L2_600>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -346,6 +266,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -359,6 +280,8 @@ next-level-cache = <&L2_700>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -426,16 +349,26 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>; - local-timer-stop; }; }; }; + firmware { + scm { + compatible = "qcom,scm-sdm845", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -696,37 +629,270 @@ }; }; + dsi_opp_table: opp-table-dsi { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-328580000 { + opp-hz = /bits/ 64 <328580000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qspi_opp_table: opp-table-qspi { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; - }; + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; - clocks { - xo_board: xo-board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <38400000>; - clock-output-names = "xo_board"; + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32764>; + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; }; }; - firmware { - scm { - compatible = "qcom,scm-sdm845", "qcom,scm"; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp-mem@85700000 { + reg = <0 0x85700000 0 0x600000>; + no-map; + }; + + xbl_mem: xbl-mem@85e00000 { + reg = <0 0x85e00000 0 0x100000>; + no-map; + }; + + aop_mem: aop-mem@85fc0000 { + reg = <0 0x85fc0000 0 0x20000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85fe0000 0 0x20000>; + no-map; + }; + + smem@86000000 { + compatible = "qcom,smem"; + reg = <0x0 0x86000000 0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + tz_mem: tz@86200000 { + reg = <0 0x86200000 0 0x2d00000>; + no-map; + }; + + rmtfs_mem: rmtfs@88f00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x88f00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + qseecom_mem: qseecom@8ab00000 { + reg = <0 0x8ab00000 0 0x1400000>; + no-map; + }; + + camera_mem: camera-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x500000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8c400000 { + reg = <0 0x8c400000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8c410000 { + reg = <0 0x8c410000 0 0x5000>; + no-map; + }; + + gpu_mem: gpu@8c415000 { + reg = <0 0x8c415000 0 0x2000>; + no-map; + }; + + adsp_mem: adsp@8c500000 { + reg = <0 0x8c500000 0 0x1a00000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@8df00000 { + reg = <0 0x8df00000 0 0x100000>; + no-map; + }; + + mpss_region: mpss@8e000000 { + reg = <0 0x8e000000 0 0x7800000>; + no-map; + }; + + venus_mem: venus@95800000 { + reg = <0 0x95800000 0 0x500000>; + no-map; + }; + + cdsp_mem: cdsp@95d00000 { + reg = <0 0x95d00000 0 0x800000>; + no-map; + }; + + mba_region: mba@96500000 { + reg = <0 0x96500000 0 0x200000>; + no-map; + }; + + slpi_mem: slpi@96700000 { + reg = <0 0x96700000 0 0x1400000>; + no-map; + }; + + spss_mem: spss@97b00000 { + reg = <0 0x97b00000 0 0x100000>; + no-map; + }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0 0xa0000000 0 0x20000000>; + size = <0 0x4000>; + no-map; + }; + + fastrpc_mem: fastrpc { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>; + alignment = <0x0 0x400000>; + size = <0x0 0x1000000>; + reusable; }; }; @@ -767,13 +933,13 @@ #size-cells = <0>; qcom,intents = <512 20>; - apr-service@3 { + service@3 { reg = <APR_SVC_ADSP_CORE>; compatible = "qcom,q6core"; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; }; - q6afe: apr-service@4 { + q6afe: service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; @@ -785,7 +951,7 @@ }; }; - q6asm: apr-service@7 { + q6asm: service@7 { compatible = "qcom,q6asm"; reg = <APR_SVC_ASM>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; @@ -798,7 +964,7 @@ }; }; - q6adm: apr-service@8 { + q6adm: service@8 { compatible = "qcom,q6adm"; reg = <APR_SVC_ADM>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; @@ -1018,64 +1184,6 @@ }; }; - psci: psci { - compatible = "arm,psci-1.0"; - method = "smc"; - - CPU_PD0: power-domain-cpu0 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; - }; - - CPU_PD1: power-domain-cpu1 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; - }; - - CPU_PD2: power-domain-cpu2 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; - }; - - CPU_PD3: power-domain-cpu3 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; - }; - - CPU_PD4: power-domain-cpu4 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; - }; - - CPU_PD5: power-domain-cpu5 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; - }; - - CPU_PD6: power-domain-cpu6 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; - }; - - CPU_PD7: power-domain-cpu7 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; - }; - - CLUSTER_PD: power-domain-cluster { - #power-domain-cells = <0>; - domain-idle-states = <&CLUSTER_SLEEP_0>; - }; - }; - soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -1125,30 +1233,6 @@ clock-names = "core"; }; - qup_opp_table: opp-table-qup { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-128000000 { - opp-hz = /bits/ 64 <128000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - gpi_dma0: dma-controller@800000 { #dma-cells = <3>; compatible = "qcom,sdm845-gpi-dma"; @@ -1636,7 +1720,7 @@ }; }; - gpi_dma1: dma-controller@0xa00000 { + gpi_dma1: dma-controller@a00000 { #dma-cells = <3>; compatible = "qcom,sdm845-gpi-dma"; reg = <0 0x00a00000 0 0x60000>; @@ -2132,11 +2216,20 @@ llcc: system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; - reg = <0 0x01100000 0 0x31000>, <0 0x01300000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>, + <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>, + <0 0x01300000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + dma@10a2000 { + compatible = "qcom,sdm845-dcc", "qcom,dcc"; + reg = <0x0 0x010a2000 0x0 0x1000>, + <0x0 0x010ae000 0x0 0x2000>; + }; + pmu@114a000 { compatible = "qcom,sdm845-llcc-bwmon"; reg = <0 0x0114a000 0 0x1000>; @@ -2175,7 +2268,7 @@ }; pmu@1436400 { - compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; + compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0 0x01436400 0 0x600>; interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>; @@ -2216,8 +2309,9 @@ reg = <0 0x01c00000 0 0x2000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, - <0 0x60100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "config"; + <0 0x60100000 0 0x100000>, + <0 0x01c07000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "config", "mhi"; device_type = "pci"; linux,pci-domain = <0>; bus-range = <0x00 0xff>; @@ -2226,8 +2320,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0xd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -2253,7 +2347,6 @@ "slave_q2a", "tbu"; - iommus = <&apps_smmu 0x1c10 0xf>; iommu-map = <0x0 &apps_smmu 0x1c10 0x1>, <0x100 &apps_smmu 0x1c11 0x1>, <0x200 &apps_smmu 0x1c12 0x1>, @@ -2321,8 +2414,9 @@ reg = <0 0x01c08000 0 0x2000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, - <0 0x40100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "config"; + <0 0x40100000 0 0x100000>, + <0 0x01c0c000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "config", "mhi"; device_type = "pci"; linux,pci-domain = <1>; bus-range = <0x00 0xff>; @@ -2331,7 +2425,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; @@ -2363,7 +2457,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1c00 0xf>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>, <0x200 &apps_smmu 0x1c02 0x1>, @@ -2551,7 +2644,7 @@ }; cryptobam: dma-controller@1dc4000 { - compatible = "qcom,bam-v1.7.0"; + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; reg = <0 0x01dc4000 0 0x24000>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rpmhcc RPMH_CE_CLK>; @@ -2585,9 +2678,9 @@ iommus = <&apps_smmu 0x720 0x0>, <&apps_smmu 0x722 0x0>; - reg = <0 0x1e40000 0 0x7000>, - <0 0x1e47000 0 0x2000>, - <0 0x1e04000 0 0x2c000>; + reg = <0 0x01e40000 0 0x7000>, + <0 0x01e47000 0 0x2000>, + <0 0x01e04000 0 0x2c000>; reg-names = "ipa-reg", "ipa-shared", "gsi"; @@ -2641,7 +2734,7 @@ gpio-ranges = <&tlmm 0 0 151>; wakeup-parent = <&pdc_intc>; - cci0_default: cci0-default { + cci0_default: cci0-default-state { /* SDA, SCL */ pins = "gpio17", "gpio18"; function = "cci_i2c"; @@ -2650,7 +2743,7 @@ drive-strength = <2>; /* 2 mA */ }; - cci0_sleep: cci0-sleep { + cci0_sleep: cci0-sleep-state { /* SDA, SCL */ pins = "gpio17", "gpio18"; function = "cci_i2c"; @@ -2659,7 +2752,7 @@ bias-pull-down; }; - cci1_default: cci1-default { + cci1_default: cci1-default-state { /* SDA, SCL */ pins = "gpio19", "gpio20"; function = "cci_i2c"; @@ -2668,7 +2761,7 @@ drive-strength = <2>; /* 2 mA */ }; - cci1_sleep: cci1-sleep { + cci1_sleep: cci1-sleep-state { /* SDA, SCL */ pins = "gpio19", "gpio20"; function = "cci_i2c"; @@ -2677,535 +2770,496 @@ bias-pull-down; }; - qspi_clk: qspi-clk { - pinmux { - pins = "gpio95"; - function = "qspi_clk"; - }; + qspi_clk: qspi-clk-state { + pins = "gpio95"; + function = "qspi_clk"; }; - qspi_cs0: qspi-cs0 { - pinmux { - pins = "gpio90"; - function = "qspi_cs"; - }; + qspi_cs0: qspi-cs0-state { + pins = "gpio90"; + function = "qspi_cs"; }; - qspi_cs1: qspi-cs1 { - pinmux { - pins = "gpio89"; - function = "qspi_cs"; - }; + qspi_cs1: qspi-cs1-state { + pins = "gpio89"; + function = "qspi_cs"; }; - qspi_data01: qspi-data01 { - pinmux-data { - pins = "gpio91", "gpio92"; - function = "qspi_data"; - }; + qspi_data0: qspi-data0-state { + pins = "gpio91"; + function = "qspi_data"; }; - qspi_data12: qspi-data12 { - pinmux-data { - pins = "gpio93", "gpio94"; - function = "qspi_data"; - }; + qspi_data1: qspi-data1-state { + pins = "gpio92"; + function = "qspi_data"; }; - qup_i2c0_default: qup-i2c0-default { - pinmux { - pins = "gpio0", "gpio1"; - function = "qup0"; - }; + qspi_data23: qspi-data23-state { + pins = "gpio93", "gpio94"; + function = "qspi_data"; }; - qup_i2c1_default: qup-i2c1-default { - pinmux { - pins = "gpio17", "gpio18"; - function = "qup1"; - }; + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; }; - qup_i2c2_default: qup-i2c2-default { - pinmux { - pins = "gpio27", "gpio28"; - function = "qup2"; - }; + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio17", "gpio18"; + function = "qup1"; }; - qup_i2c3_default: qup-i2c3-default { - pinmux { - pins = "gpio41", "gpio42"; - function = "qup3"; - }; + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio27", "gpio28"; + function = "qup2"; }; - qup_i2c4_default: qup-i2c4-default { - pinmux { - pins = "gpio89", "gpio90"; - function = "qup4"; - }; + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio41", "gpio42"; + function = "qup3"; }; - qup_i2c5_default: qup-i2c5-default { - pinmux { - pins = "gpio85", "gpio86"; - function = "qup5"; - }; + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio89", "gpio90"; + function = "qup4"; }; - qup_i2c6_default: qup-i2c6-default { - pinmux { - pins = "gpio45", "gpio46"; - function = "qup6"; - }; + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio85", "gpio86"; + function = "qup5"; }; - qup_i2c7_default: qup-i2c7-default { - pinmux { - pins = "gpio93", "gpio94"; - function = "qup7"; - }; + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio45", "gpio46"; + function = "qup6"; }; - qup_i2c8_default: qup-i2c8-default { - pinmux { - pins = "gpio65", "gpio66"; - function = "qup8"; - }; + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio93", "gpio94"; + function = "qup7"; }; - qup_i2c9_default: qup-i2c9-default { - pinmux { - pins = "gpio6", "gpio7"; - function = "qup9"; - }; + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio65", "gpio66"; + function = "qup8"; }; - qup_i2c10_default: qup-i2c10-default { - pinmux { - pins = "gpio55", "gpio56"; - function = "qup10"; - }; + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio6", "gpio7"; + function = "qup9"; }; - qup_i2c11_default: qup-i2c11-default { - pinmux { - pins = "gpio31", "gpio32"; - function = "qup11"; - }; + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio55", "gpio56"; + function = "qup10"; }; - qup_i2c12_default: qup-i2c12-default { - pinmux { - pins = "gpio49", "gpio50"; - function = "qup12"; - }; + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio31", "gpio32"; + function = "qup11"; }; - qup_i2c13_default: qup-i2c13-default { - pinmux { - pins = "gpio105", "gpio106"; - function = "qup13"; - }; + qup_i2c12_default: qup-i2c12-default-state { + pins = "gpio49", "gpio50"; + function = "qup12"; }; - qup_i2c14_default: qup-i2c14-default { - pinmux { - pins = "gpio33", "gpio34"; - function = "qup14"; - }; + qup_i2c13_default: qup-i2c13-default-state { + pins = "gpio105", "gpio106"; + function = "qup13"; }; - qup_i2c15_default: qup-i2c15-default { - pinmux { - pins = "gpio81", "gpio82"; - function = "qup15"; - }; + qup_i2c14_default: qup-i2c14-default-state { + pins = "gpio33", "gpio34"; + function = "qup14"; }; - qup_spi0_default: qup-spi0-default { - pinmux { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - function = "qup0"; - }; + qup_i2c15_default: qup-i2c15-default-state { + pins = "gpio81", "gpio82"; + function = "qup15"; + }; - config { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - drive-strength = <6>; - bias-disable; - }; + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; }; - qup_spi1_default: qup-spi1-default { - pinmux { - pins = "gpio17", "gpio18", - "gpio19", "gpio20"; - function = "qup1"; - }; + qup_spi1_default: qup-spi1-default-state { + pins = "gpio17", "gpio18", "gpio19", "gpio20"; + function = "qup1"; }; - qup_spi2_default: qup-spi2-default { - pinmux { - pins = "gpio27", "gpio28", - "gpio29", "gpio30"; - function = "qup2"; - }; + qup_spi2_default: qup-spi2-default-state { + pins = "gpio27", "gpio28", "gpio29", "gpio30"; + function = "qup2"; }; - qup_spi3_default: qup-spi3-default { - pinmux { - pins = "gpio41", "gpio42", - "gpio43", "gpio44"; - function = "qup3"; - }; + qup_spi3_default: qup-spi3-default-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "qup3"; }; - qup_spi4_default: qup-spi4-default { - pinmux { - pins = "gpio89", "gpio90", - "gpio91", "gpio92"; - function = "qup4"; - }; + qup_spi4_default: qup-spi4-default-state { + pins = "gpio89", "gpio90", "gpio91", "gpio92"; + function = "qup4"; }; - qup_spi5_default: qup-spi5-default { - pinmux { - pins = "gpio85", "gpio86", - "gpio87", "gpio88"; - function = "qup5"; - }; + qup_spi5_default: qup-spi5-default-state { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + function = "qup5"; }; - qup_spi6_default: qup-spi6-default { - pinmux { - pins = "gpio45", "gpio46", - "gpio47", "gpio48"; - function = "qup6"; - }; + qup_spi6_default: qup-spi6-default-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; }; - qup_spi7_default: qup-spi7-default { - pinmux { - pins = "gpio93", "gpio94", - "gpio95", "gpio96"; - function = "qup7"; - }; + qup_spi7_default: qup-spi7-default-state { + pins = "gpio93", "gpio94", "gpio95", "gpio96"; + function = "qup7"; }; - qup_spi8_default: qup-spi8-default { - pinmux { - pins = "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "qup8"; - }; + qup_spi8_default: qup-spi8-default-state { + pins = "gpio65", "gpio66", "gpio67", "gpio68"; + function = "qup8"; }; - qup_spi9_default: qup-spi9-default { - pinmux { - pins = "gpio6", "gpio7", - "gpio4", "gpio5"; - function = "qup9"; - }; + qup_spi9_default: qup-spi9-default-state { + pins = "gpio6", "gpio7", "gpio4", "gpio5"; + function = "qup9"; }; - qup_spi10_default: qup-spi10-default { - pinmux { - pins = "gpio55", "gpio56", - "gpio53", "gpio54"; - function = "qup10"; - }; + qup_spi10_default: qup-spi10-default-state { + pins = "gpio55", "gpio56", "gpio53", "gpio54"; + function = "qup10"; }; - qup_spi11_default: qup-spi11-default { - pinmux { - pins = "gpio31", "gpio32", - "gpio33", "gpio34"; - function = "qup11"; - }; + qup_spi11_default: qup-spi11-default-state { + pins = "gpio31", "gpio32", "gpio33", "gpio34"; + function = "qup11"; }; - qup_spi12_default: qup-spi12-default { - pinmux { - pins = "gpio49", "gpio50", - "gpio51", "gpio52"; - function = "qup12"; - }; + qup_spi12_default: qup-spi12-default-state { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "qup12"; }; - qup_spi13_default: qup-spi13-default { - pinmux { - pins = "gpio105", "gpio106", - "gpio107", "gpio108"; - function = "qup13"; - }; + qup_spi13_default: qup-spi13-default-state { + pins = "gpio105", "gpio106", "gpio107", "gpio108"; + function = "qup13"; }; - qup_spi14_default: qup-spi14-default { - pinmux { - pins = "gpio33", "gpio34", - "gpio31", "gpio32"; - function = "qup14"; - }; + qup_spi14_default: qup-spi14-default-state { + pins = "gpio33", "gpio34", "gpio31", "gpio32"; + function = "qup14"; }; - qup_spi15_default: qup-spi15-default { - pinmux { - pins = "gpio81", "gpio82", - "gpio83", "gpio84"; - function = "qup15"; - }; + qup_spi15_default: qup-spi15-default-state { + pins = "gpio81", "gpio82", "gpio83", "gpio84"; + function = "qup15"; }; - qup_uart0_default: qup-uart0-default { - pinmux { - pins = "gpio2", "gpio3"; + qup_uart0_default: qup-uart0-default-state { + qup_uart0_tx: tx-pins { + pins = "gpio2"; + function = "qup0"; + }; + + qup_uart0_rx: rx-pins { + pins = "gpio3"; function = "qup0"; }; }; - qup_uart1_default: qup-uart1-default { - pinmux { - pins = "gpio19", "gpio20"; + qup_uart1_default: qup-uart1-default-state { + qup_uart1_tx: tx-pins { + pins = "gpio19"; function = "qup1"; }; - }; - qup_uart2_default: qup-uart2-default { - pinmux { - pins = "gpio29", "gpio30"; - function = "qup2"; + qup_uart1_rx: rx-pins { + pins = "gpio20"; + function = "qup1"; }; }; - qup_uart3_default: qup-uart3-default { - pinmux { - pins = "gpio43", "gpio44"; - function = "qup3"; + qup_uart2_default: qup-uart2-default-state { + qup_uart2_tx: tx-pins { + pins = "gpio29"; + function = "qup2"; }; - }; - qup_uart4_default: qup-uart4-default { - pinmux { - pins = "gpio91", "gpio92"; - function = "qup4"; + qup_uart2_rx: rx-pins { + pins = "gpio30"; + function = "qup2"; }; }; - qup_uart5_default: qup-uart5-default { - pinmux { - pins = "gpio87", "gpio88"; - function = "qup5"; + qup_uart3_default: qup-uart3-default-state { + qup_uart3_tx: tx-pins { + pins = "gpio43"; + function = "qup3"; }; - }; - qup_uart6_default: qup-uart6-default { - pinmux { - pins = "gpio47", "gpio48"; - function = "qup6"; + qup_uart3_rx: rx-pins { + pins = "gpio44"; + function = "qup3"; }; }; - qup_uart7_default: qup-uart7-default { - pinmux { - pins = "gpio95", "gpio96"; - function = "qup7"; + qup_uart3_4pin: qup-uart3-4pin-state { + qup_uart3_4pin_cts: cts-pins { + pins = "gpio41"; + function = "qup3"; }; - }; - qup_uart8_default: qup-uart8-default { - pinmux { - pins = "gpio67", "gpio68"; - function = "qup8"; + qup_uart3_4pin_rts_tx: rts-tx-pins { + pins = "gpio42", "gpio43"; + function = "qup3"; }; - }; - qup_uart9_default: qup-uart9-default { - pinmux { - pins = "gpio4", "gpio5"; - function = "qup9"; + qup_uart3_4pin_rx: rx-pins { + pins = "gpio44"; + function = "qup3"; }; }; - qup_uart10_default: qup-uart10-default { - pinmux { - pins = "gpio53", "gpio54"; - function = "qup10"; + qup_uart4_default: qup-uart4-default-state { + qup_uart4_tx: tx-pins { + pins = "gpio91"; + function = "qup4"; }; - }; - qup_uart11_default: qup-uart11-default { - pinmux { - pins = "gpio33", "gpio34"; - function = "qup11"; + qup_uart4_rx: rx-pins { + pins = "gpio92"; + function = "qup4"; }; }; - qup_uart12_default: qup-uart12-default { - pinmux { - pins = "gpio51", "gpio52"; - function = "qup12"; + qup_uart5_default: qup-uart5-default-state { + qup_uart5_tx: tx-pins { + pins = "gpio87"; + function = "qup5"; }; - }; - qup_uart13_default: qup-uart13-default { - pinmux { - pins = "gpio107", "gpio108"; - function = "qup13"; + qup_uart5_rx: rx-pins { + pins = "gpio88"; + function = "qup5"; }; }; - qup_uart14_default: qup-uart14-default { - pinmux { - pins = "gpio31", "gpio32"; - function = "qup14"; + qup_uart6_default: qup-uart6-default-state { + qup_uart6_tx: tx-pins { + pins = "gpio47"; + function = "qup6"; }; - }; - qup_uart15_default: qup-uart15-default { - pinmux { - pins = "gpio83", "gpio84"; - function = "qup15"; + qup_uart6_rx: rx-pins { + pins = "gpio48"; + function = "qup6"; }; }; - quat_mi2s_sleep: quat_mi2s_sleep { - mux { - pins = "gpio58", "gpio59"; - function = "gpio"; + qup_uart6_4pin: qup-uart6-4pin-state { + qup_uart6_4pin_cts: cts-pins { + pins = "gpio45"; + function = "qup6"; + bias-pull-down; }; - config { - pins = "gpio58", "gpio59"; + qup_uart6_4pin_rts_tx: rts-tx-pins { + pins = "gpio46", "gpio47"; + function = "qup6"; drive-strength = <2>; - bias-pull-down; - input-enable; + bias-disable; + }; + + qup_uart6_4pin_rx: rx-pins { + pins = "gpio48"; + function = "qup6"; + bias-pull-up; }; }; - quat_mi2s_active: quat_mi2s_active { - mux { - pins = "gpio58", "gpio59"; - function = "qua_mi2s"; + qup_uart7_default: qup-uart7-default-state { + qup_uart7_tx: tx-pins { + pins = "gpio95"; + function = "qup7"; }; - config { - pins = "gpio58", "gpio59"; - drive-strength = <8>; - bias-disable; - output-high; + qup_uart7_rx: rx-pins { + pins = "gpio96"; + function = "qup7"; }; }; - quat_mi2s_sd0_sleep: quat_mi2s_sd0_sleep { - mux { - pins = "gpio60"; - function = "gpio"; + qup_uart8_default: qup-uart8-default-state { + qup_uart8_tx: tx-pins { + pins = "gpio67"; + function = "qup8"; }; - config { - pins = "gpio60"; - drive-strength = <2>; - bias-pull-down; - input-enable; + qup_uart8_rx: rx-pins { + pins = "gpio68"; + function = "qup8"; }; }; - quat_mi2s_sd0_active: quat_mi2s_sd0_active { - mux { - pins = "gpio60"; - function = "qua_mi2s"; + qup_uart9_default: qup-uart9-default-state { + qup_uart9_tx: tx-pins { + pins = "gpio4"; + function = "qup9"; }; - config { - pins = "gpio60"; - drive-strength = <8>; - bias-disable; + qup_uart9_rx: rx-pins { + pins = "gpio5"; + function = "qup9"; }; }; - quat_mi2s_sd1_sleep: quat_mi2s_sd1_sleep { - mux { - pins = "gpio61"; - function = "gpio"; + qup_uart10_default: qup-uart10-default-state { + qup_uart10_tx: tx-pins { + pins = "gpio53"; + function = "qup10"; }; - config { - pins = "gpio61"; - drive-strength = <2>; - bias-pull-down; - input-enable; + qup_uart10_rx: rx-pins { + pins = "gpio54"; + function = "qup10"; }; }; - quat_mi2s_sd1_active: quat_mi2s_sd1_active { - mux { - pins = "gpio61"; - function = "qua_mi2s"; + qup_uart11_default: qup-uart11-default-state { + qup_uart11_tx: tx-pins { + pins = "gpio33"; + function = "qup11"; }; - config { - pins = "gpio61"; - drive-strength = <8>; - bias-disable; + qup_uart11_rx: rx-pins { + pins = "gpio34"; + function = "qup11"; }; }; - quat_mi2s_sd2_sleep: quat_mi2s_sd2_sleep { - mux { - pins = "gpio62"; - function = "gpio"; + qup_uart12_default: qup-uart12-default-state { + qup_uart12_tx: tx-pins { + pins = "gpio51"; + function = "qup0"; }; - config { - pins = "gpio62"; - drive-strength = <2>; - bias-pull-down; - input-enable; + qup_uart12_rx: rx-pins { + pins = "gpio52"; + function = "qup0"; }; }; - quat_mi2s_sd2_active: quat_mi2s_sd2_active { - mux { - pins = "gpio62"; - function = "qua_mi2s"; + qup_uart13_default: qup-uart13-default-state { + qup_uart13_tx: tx-pins { + pins = "gpio107"; + function = "qup13"; }; - config { - pins = "gpio62"; - drive-strength = <8>; - bias-disable; + qup_uart13_rx: rx-pins { + pins = "gpio108"; + function = "qup13"; }; }; - quat_mi2s_sd3_sleep: quat_mi2s_sd3_sleep { - mux { - pins = "gpio63"; - function = "gpio"; + qup_uart14_default: qup-uart14-default-state { + qup_uart14_tx: tx-pins { + pins = "gpio31"; + function = "qup14"; }; - config { - pins = "gpio63"; - drive-strength = <2>; - bias-pull-down; - input-enable; + qup_uart14_rx: rx-pins { + pins = "gpio32"; + function = "qup14"; }; }; - quat_mi2s_sd3_active: quat_mi2s_sd3_active { - mux { - pins = "gpio63"; - function = "qua_mi2s"; + qup_uart15_default: qup-uart15-default-state { + qup_uart15_tx: tx-pins { + pins = "gpio83"; + function = "qup15"; }; - config { - pins = "gpio63"; - drive-strength = <8>; - bias-disable; + qup_uart15_rx: rx-pins { + pins = "gpio84"; + function = "qup15"; }; }; + + quat_mi2s_sleep: quat-mi2s-sleep-state { + pins = "gpio58", "gpio59"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + quat_mi2s_active: quat-mi2s-active-state { + pins = "gpio58", "gpio59"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + quat_mi2s_sd0_sleep: quat-mi2s-sd0-sleep-state { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + quat_mi2s_sd0_active: quat-mi2s-sd0-active-state { + pins = "gpio60"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + quat_mi2s_sd1_sleep: quat-mi2s-sd1-sleep-state { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + quat_mi2s_sd1_active: quat-mi2s-sd1-active-state { + pins = "gpio61"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + quat_mi2s_sd2_sleep: quat-mi2s-sd2-sleep-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + quat_mi2s_sd2_active: quat-mi2s-sd2-active-state { + pins = "gpio62"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + quat_mi2s_sd3_sleep: quat-mi2s-sd3-sleep-state { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + quat_mi2s_sd3_active: quat-mi2s-sd3-active-state { + pins = "gpio63"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + }; }; mss_pil: remoteproc@4080000 { @@ -3261,6 +3315,10 @@ memory-region = <&mpss_region>; }; + metadata { + memory-region = <&mdata_mem>; + }; + glink-edge { interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; label = "modem"; @@ -3283,6 +3341,59 @@ "gcc_gpu_gpll0_div_clk_src"; }; + slpi_pas: remoteproc@5c00000 { + compatible = "qcom,sdm845-slpi-pas"; + reg = <0 0x5c00000 0 0x4000>; + + interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + qcom,qmp = <&aoss_qmp>; + + power-domains = <&rpmhpd SDM845_CX>, + <&rpmhpd SDM845_MX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apss_shared 24>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + qcom,vmids = <QCOM_SCM_VMID_HLOS QCOM_SCM_VMID_MSS_MSA + QCOM_SCM_VMID_SSC_Q6 QCOM_SCM_VMID_ADSP_Q6>; + memory-region = <&fastrpc_mem>; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@0 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <0>; + }; + }; + }; + }; + stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x06002000 0 0x1000>, @@ -3785,30 +3896,6 @@ }; }; - qspi_opp_table: opp-table-qspi { - compatible = "operating-points-v2"; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-150000000 { - opp-hz = /bits/ 64 <150000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - qspi: spi@88df000 { compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; reg = <0 0x088df000 0 0x600>; @@ -3823,82 +3910,18 @@ status = "disabled"; }; - slim: slim@171c0000 { + slim: slim-ngd@171c0000 { compatible = "qcom,slim-ngd-v2.1.0"; reg = <0 0x171c0000 0 0x2c000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - qcom,apps-ch-pipes = <0x780000>; - qcom,ea-pc = <0x270>; - status = "okay"; - dmas = <&slimbam 3>, <&slimbam 4>, - <&slimbam 5>, <&slimbam 6>; - dma-names = "rx", "tx", "tx2", "rx2"; + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; iommus = <&apps_smmu 0x1806 0x0>; #address-cells = <1>; #size-cells = <0>; - - ngd@1 { - reg = <1>; - #address-cells = <2>; - #size-cells = <0>; - - wcd9340_ifd: ifd@0{ - compatible = "slim217,250"; - reg = <0 0>; - }; - - wcd9340: codec@1{ - compatible = "slim217,250"; - reg = <1 0>; - slim-ifc-dev = <&wcd9340_ifd>; - - #sound-dai-cells = <1>; - - interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - #clock-cells = <0>; - clock-frequency = <9600000>; - clock-output-names = "mclk"; - qcom,micbias1-microvolt = <1800000>; - qcom,micbias2-microvolt = <1800000>; - qcom,micbias3-microvolt = <1800000>; - qcom,micbias4-microvolt = <1800000>; - - #address-cells = <1>; - #size-cells = <1>; - - wcdgpio: gpio-controller@42 { - compatible = "qcom,wcd9340-gpio"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x42 0x2>; - }; - - swm: swm@c85 { - compatible = "qcom,soundwire-v1.3.0"; - reg = <0xc85 0x40>; - interrupts-extended = <&wcd9340 20>; - - qcom,dout-ports = <6>; - qcom,din-ports = <2>; - qcom,ports-sinterval-low =/bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>; - qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>; - - #sound-dai-cells = <1>; - clocks = <&wcd9340>; - clock-names = "iface"; - #address-cells = <2>; - #size-cells = <0>; - - - }; - }; - }; + status = "disabled"; }; lmh_cluster1: lmh@17d70800 { @@ -3925,9 +3948,6 @@ #interrupt-cells = <1>; }; - sound: sound { - }; - usb_1_hsphy: phy@88e2000 { compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; reg = <0 0x088e2000 0 0x400>; @@ -3959,9 +3979,10 @@ }; usb_1_qmpphy: phy@88e9000 { - compatible = "qcom,sdm845-qmp-usb3-phy"; + compatible = "qcom,sdm845-qmp-usb3-dp-phy"; reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x10>; + <0 0x088e8000 0 0x38>, + <0 0x088ea000 0 0x40>; status = "disabled"; #address-cells = <2>; #size-cells = <2>; @@ -3973,11 +3994,11 @@ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, - <&gcc GCC_USB3_PHY_PRIM_BCR>; + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { + usb_1_ssphy: usb3-phy@88e9200 { reg = <0 0x088e9200 0 0x128>, <0 0x088e9400 0 0x200>, <0 0x088e9c00 0 0x218>, @@ -3990,6 +4011,16 @@ clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; }; usb_2_qmpphy: phy@88eb000 { @@ -4210,16 +4241,16 @@ camss: camss@a00000 { compatible = "qcom,sdm845-camss"; - reg = <0 0xacb3000 0 0x1000>, - <0 0xacba000 0 0x1000>, - <0 0xacc8000 0 0x1000>, - <0 0xac65000 0 0x1000>, - <0 0xac66000 0 0x1000>, - <0 0xac67000 0 0x1000>, - <0 0xac68000 0 0x1000>, - <0 0xacaf000 0 0x4000>, - <0 0xacb6000 0 0x4000>, - <0 0xacc4000 0 0x4000>; + reg = <0 0x0acb3000 0 0x1000>, + <0 0x0acba000 0 0x1000>, + <0 0x0acc8000 0 0x1000>, + <0 0x0ac65000 0 0x1000>, + <0 0x0ac66000 0 0x1000>, + <0 0x0ac67000 0 0x1000>, + <0 0x0ac68000 0 0x1000>, + <0 0x0acaf000 0 0x4000>, + <0 0x0acb6000 0 0x4000>, + <0 0x0acc4000 0 0x4000>; reg-names = "csid0", "csid1", "csid2", @@ -4339,11 +4370,27 @@ ports { #address-cells = <1>; #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; }; }; cci: cci@ac4a000 { - compatible = "qcom,sdm845-cci"; + compatible = "qcom,sdm845-cci", "qcom,msm8996-cci"; #address-cells = <1>; #size-cells = <0>; @@ -4399,36 +4446,7 @@ clock-names = "bi_tcxo"; }; - dsi_opp_table: opp-table-dsi { - compatible = "operating-points-v2"; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-180000000 { - opp-hz = /bits/ 64 <180000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-275000000 { - opp-hz = /bits/ 64 <275000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-328580000 { - opp-hz = /bits/ 64 <328580000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-358000000 { - opp-hz = /bits/ 64 <358000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - - mdss: mdss@ae00000 { + mdss: display-subsystem@ae00000 { compatible = "qcom,sdm845-mdss"; reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; @@ -4483,13 +4501,20 @@ port@0 { reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; }; }; port@1 { reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; dpu_intf2_out: endpoint { remote-endpoint = <&dsi1_in>; }; @@ -4521,8 +4546,79 @@ }; }; + mdss_dp: displayport-controller@ae90000 { + status = "disabled"; + compatible = "qcom,sdm845-dp"; + + reg = <0 0x0ae90000 0 0x200>, + <0 0x0ae90200 0 0x200>, + <0 0x0ae90400 0 0x600>, + <0 0x0ae90a00 0 0x600>, + <0 0x0ae91000 0 0x600>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + dsi0: dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sdm845-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; reg-names = "dsi_ctrl"; @@ -4548,7 +4644,6 @@ power-domains = <&rpmhpd SDM845_CX>; phys = <&dsi0_phy>; - phy-names = "dsi"; status = "disabled"; @@ -4574,7 +4669,7 @@ }; }; - dsi0_phy: dsi-phy@ae94400 { + dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, @@ -4594,7 +4689,8 @@ }; dsi1: dsi@ae96000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sdm845-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae96000 0 0x400>; reg-names = "dsi_ctrl"; @@ -4620,7 +4716,6 @@ power-domains = <&rpmhpd SDM845_CX>; phys = <&dsi1_phy>; - phy-names = "dsi"; status = "disabled"; @@ -4646,7 +4741,7 @@ }; }; - dsi1_phy: dsi-phy@ae96400 { + dsi1_phy: phy@ae96400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, @@ -4669,7 +4764,7 @@ gpu: gpu@5000000 { compatible = "qcom,adreno-630.2", "qcom,adreno"; - reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>; + reg = <0 0x05000000 0 0x40000>, <0 0x509e000 0 0x10>; reg-names = "kgsl_3d0_reg_memory", "cx_mem"; /* @@ -4739,7 +4834,7 @@ adreno_smmu: iommu@5040000 { compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; - reg = <0 0x5040000 0 0x10000>; + reg = <0 0x05040000 0 0x10000>; #iommu-cells = <1>; #global-interrupts = <2>; interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, @@ -4762,9 +4857,9 @@ gmu: gmu@506a000 { compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; - reg = <0 0x506a000 0 0x30000>, - <0 0xb280000 0 0x10000>, - <0 0xb480000 0 0x10000>; + reg = <0 0x0506a000 0 0x30000>, + <0 0x0b280000 0 0x10000>, + <0 0x0b480000 0 0x10000>; reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, @@ -4812,8 +4907,8 @@ <&dsi0_phy 1>, <&dsi1_phy 0>, <&dsi1_phy 1>, - <0>, - <0>; + <&dp_phy 0>, + <&dp_phy 1>; clock-names = "bi_tcxo", "gcc_disp_gpll0_clk_src", "gcc_disp_gpll0_div_clk_src", @@ -4871,7 +4966,7 @@ #reset-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; @@ -4909,7 +5004,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sram@146bf000 { @@ -5197,7 +5291,7 @@ }; osm_l3: interconnect@17d41000 { - compatible = "qcom,sdm845-osm-l3"; + compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3"; reg = <0 0x17d41000 0 0x1400>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; @@ -5207,7 +5301,7 @@ }; cpufreq_hw: cpufreq@17d43000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; @@ -5217,6 +5311,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; wifi: wifi@18800000 { @@ -5244,6 +5339,9 @@ }; }; + sound: sound { + }; + thermal-zones { cpu0-thermal { polling-delay-passive = <250>; @@ -5264,7 +5362,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5291,7 +5389,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5318,7 +5416,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5345,7 +5443,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5372,7 +5470,7 @@ type = "passive"; }; - cpu4_crit: cpu_crit { + cpu4_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5399,7 +5497,7 @@ type = "passive"; }; - cpu5_crit: cpu_crit { + cpu5_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5426,7 +5524,7 @@ type = "passive"; }; - cpu6_crit: cpu_crit { + cpu6_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5453,7 +5551,7 @@ type = "passive"; }; - cpu7_crit: cpu_crit { + cpu7_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5666,4 +5764,12 @@ }; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index be59a8ba9c1f..1326c171fe72 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -13,6 +13,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> #include "sdm850.dtsi" +#include "sdm845-wcd9340.dtsi" #include "pm8998.dtsi" /* @@ -94,12 +95,12 @@ }; &adsp_pas { - firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn"; + firmware-name = "qcom/sdm850/LENOVO/81JL/qcadsp850.mbn"; status = "okay"; }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -306,7 +307,7 @@ }; &cdsp_pas { - firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn"; + firmware-name = "qcom/sdm850/LENOVO/81JL/qccdsp850.mbn"; status = "okay"; }; @@ -345,7 +346,7 @@ status = "okay"; zap-shader { memory-region = <&gpu_mem>; - firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; + firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn"; }; }; @@ -465,8 +466,9 @@ }; &ipa { - status = "okay"; + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; + status = "okay"; }; &mdss { @@ -475,15 +477,12 @@ &mss_pil { status = "okay"; - firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; + firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn"; }; &qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_i2c12_default { @@ -491,29 +490,6 @@ bias-disable; }; -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-pull-down; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; - &qupv3_id_0 { status = "okay"; }; @@ -537,7 +513,7 @@ }; &sound { - compatible = "qcom,db845c-sndcard"; + compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard"; model = "Lenovo-YOGA-C630-13Q50"; audio-routing = @@ -619,66 +595,55 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - sn65dsi86_pin_active: sn65dsi86-enable { + sn65dsi86_pin_active: sn65dsi86-enable-state { pins = "gpio96"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - i2c3_hid_active: i2c2-hid-active { + i2c3_hid_active: i2c2-hid-active-state { pins = "gpio37"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; - i2c5_hid_active: i2c5-hid-active { + i2c5_hid_active: i2c5-hid-active-state { pins = "gpio125"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; - i2c11_hid_active: i2c11-hid-active { + i2c11_hid_active: i2c11-hid-active-state { pins = "gpio92"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; - wcd_intr_default: wcd_intr_default { - pins = "gpio54"; - function = "gpio"; - - input-enable; - bias-pull-down; - drive-strength = <2>; - }; - - lid_pin_active: lid-pin { + lid_pin_active: lid-pin-state { pins = "gpio124"; function = "gpio"; - input-enable; bias-disable; }; - mode_pin_active: mode-pin { + mode_pin_active: mode-pin-state { pins = "gpio95"; function = "gpio"; - input-enable; bias-disable; }; }; &uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_4pin>; status = "okay"; bluetooth { @@ -764,14 +729,11 @@ }; &venus { + firmware-name = "qcom/sdm850/LENOVO/81JL/qcvss850.mbn"; status = "okay"; }; -&wcd9340{ - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; +&wcd9340 { reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; @@ -783,18 +745,18 @@ qcom,mbhc-headphone-vthreshold-microvolt = <50000>; swm: swm@c85 { - left_spkr: wsa8810-left{ + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; - powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; }; - right_spkr: wsa8810-right{ + right_spkr: speaker@0,4 { compatible = "sdw10217211000"; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; reg = <0 4>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight"; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index f954fe5cb61a..41f59e32af64 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -14,6 +14,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> #include "sdm850.dtsi" +#include "sdm845-wcd9340.dtsi" #include "pm8998.dtsi" /* @@ -43,7 +44,7 @@ #size-cells = <2>; ranges; - // Firmware initialized the display at 1280p instead of 1440p + /* Firmware initialized the display at 1280p instead of 1440p */ framebuffer0: framebuffer@80400000 { compatible = "simple-framebuffer"; reg = <0 0x80400000 0 (1920 * 1280 * 4)>; @@ -124,12 +125,12 @@ }; &adsp_pas { - firmware-name = "qcom/samsung/w737/qcadsp850.mbn"; + firmware-name = "qcom/sdm850/samsung/w737/qcadsp850.mbn"; status = "okay"; }; &apps_rsc { - pm8998-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; qcom,pmic-id = "a"; @@ -336,7 +337,7 @@ }; &cdsp_pas { - firmware-name = "qcom/samsung/w737/qccdsp850.mbn"; + firmware-name = "qcom/sdm850/samsung/w737/qccdsp850.mbn"; status = "okay"; }; @@ -383,9 +384,10 @@ }; &ipa { - status = "okay"; + qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/samsung/w737/ipa_fws.elf"; + firmware-name = "qcom/sdm850/samsung/w737/ipa_fws.elf"; + status = "okay"; }; /* No idea why it causes an SError when enabled */ @@ -395,23 +397,17 @@ &mss_pil { status = "okay"; - firmware-name = "qcom/samsung/w737/qcdsp1v2850.mbn", "qcom/samsung/w737/qcdsp2850.mbn"; + firmware-name = "qcom/sdm850/samsung/w737/qcdsp1v2850.mbn", "qcom/sdm850/samsung/w737/qcdsp2850.mbn"; }; &qup_i2c10_default { - pinconf { - pins = "gpio55", "gpio56"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_i2c11_default { - pinconf { - pins = "gpio31", "gpio32"; - drive-strength = <2>; - bias-disable; - }; + drive-strength = <2>; + bias-disable; }; &qup_i2c12_default { @@ -419,29 +415,6 @@ bias-disable; }; -&qup_uart6_default { - pinmux { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - cts { - pins = "gpio45"; - bias-pull-down; - }; - - rts-tx { - pins = "gpio46", "gpio47"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio48"; - bias-pull-up; - }; -}; - &qupv3_id_0 { status = "okay"; }; @@ -547,69 +520,44 @@ &tlmm { gpio-reserved-ranges = <0 6>, <85 4>; - pen_irq_l: pen-irq-l { - pinmux { - pins = "gpio119"; - function = "gpio"; - }; - - pinconf { - pins = "gpio119"; - bias-disable; - }; - }; - - pen_pdct_l: pen-pdct-l { - pinmux { - pins = "gpio124"; - function = "gpio"; - }; - - pinconf { - pins = "gpio124"; - bias-disable; - drive-strength = <2>; - output-high; - }; + pen_irq_l: pen-irq-l-state { + pins = "gpio119"; + function = "gpio"; + bias-disable; }; - pen_rst_l: pen-rst-l { - pinmux { - pins = "gpio21"; - function = "gpio"; - }; - - pinconf { - pins = "gpio21"; - bias-disable; - drive-strength = <2>; - - /* - * The pen driver doesn't currently support - * driving this reset line. By specifying - * output-high here we're relying on the fact - * that this pin has a default pulldown at boot - * (which makes sure the pen was in reset if it - * was powered) and then we set it high here to - * take it out of reset. Better would be if the - * pen driver could control this and we could - * remove "output-high" here. - */ - output-high; - }; + pen_pdct_l: pen-pdct-l-state { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-high; }; - wcd_intr_default: wcd_intr_default { - pins = "gpio54"; + pen_rst_l: pen-rst-l-state { + pins = "gpio21"; function = "gpio"; - - input-enable; - bias-pull-down; + bias-disable; drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; }; }; &uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_4pin>; status = "okay"; bluetooth { @@ -696,14 +644,10 @@ &venus { status = "okay"; - firmware-name = "qcom/samsung/w737/qcvss850.mbn"; + firmware-name = "qcom/sdm850/samsung/w737/qcvss850.mbn"; }; -&wcd9340{ - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; +&wcd9340 { reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-buck-sido-supply = <&vreg_s4a_1p8>; @@ -715,18 +659,18 @@ qcom,mbhc-headphone-vthreshold-microvolt = <50000>; swm: swm@c85 { - left_spkr: wsa8810-left{ + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; - powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; }; - right_spkr: wsa8810-right{ + right_spkr: speaker@0,4 { compatible = "sdw10217211000"; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; reg = <0 4>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight"; diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts new file mode 100644 index 000000000000..a1f0622db5a0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> + */ + +/dts-v1/; + +#include "sm4250.dtsi" + +/ { + model = "OnePlus Nord N100"; + compatible = "oneplus,billie2", "qcom,sm4250"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>; + qcom,board-id = <0x1000b 0x00>; + + aliases { + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (1600 * 720 * 4)>; + width = <720>; + height = <1600>; + stride = <(720 * 4)>; + format = "a8r8g8b8"; + }; + }; +}; + +&reserved_memory { + bootloader_log_mem: memory@5fff7000 { + reg = <0x0 0x5fff7000 0x0 0x8000>; + no-map; + }; + + ramoops@cbe00000 { + compatible = "ramoops"; + reg = <0x0 0xcbe00000 0x0 0x400000>; + record-size = <0x40000>; + pmsg-size = <0x200000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + }; + + param_mem: memory@cc200000 { + reg = <0x0 0xcc200000 0x0 0x100000>; + no-map; + }; + + mtp_mem: memory@cc300000 { + reg = <0x00 0xcc300000 0x00 0xb00000>; + no-map; + }; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vreg_s6a: s6 { + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <1456000>; + }; + + vreg_s7a: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s8a: s8 { + regulator-min-microvolt = <1064000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l1a: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + vreg_l4a: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3056000>; + }; + + vreg_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l10a: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l11a: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l12a: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + vreg_l13a: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l14a: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l19a: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l20a: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l21a: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l22a: l22 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l23a: l23 { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l24a: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3544000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <14 4>; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l24a>; + vcc-max-microamp = <600000>; + vccq2-supply = <&vreg_l11a>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l12a>; + vddp-ref-clk-supply = <&vreg_l18a>; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l12a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi new file mode 100644 index 000000000000..c5add8f44fc0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> + */ + +#include "sm6115.dtsi" + +&CPU0 { + compatible = "qcom,kryo240"; +}; + +&CPU1 { + compatible = "qcom,kryo240"; +}; + +&CPU2 { + compatible = "qcom,kryo240"; +}; + +&CPU3 { + compatible = "qcom,kryo240"; +}; + +&CPU4 { + compatible = "qcom,kryo240"; +}; + +&CPU5 { + compatible = "qcom,kryo240"; +}; + +&CPU6 { + compatible = "qcom,kryo240"; +}; + +&CPU7 { + compatible = "qcom,kryo240"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi new file mode 100644 index 000000000000..43f31c1b9d5a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -0,0 +1,2721 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> + */ + +#include <dt-bindings/clock/qcom,gcc-sm6115.h> +#include <dt-bindings/clock/qcom,sm6115-dispcc.h> +#include <dt-bindings/clock/qcom,sm6115-gpucc.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x1>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x2>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x3>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x100>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + next-level-cache = <&L2_1>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x101>; + clocks = <&cpufreq_hw 1>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + qcom,freq-domain = <&cpufreq_hw 1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x102>; + clocks = <&cpufreq_hw 1>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + qcom,freq-domain = <&cpufreq_hw 1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "qcom,kryo260"; + reg = <0x0 0x103>; + clocks = <&cpufreq_hw 1>; + capacity-dmips-mhz = <1638>; + dynamic-power-coefficient = <282>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + qcom,freq-domain = <&cpufreq_hw 1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6115", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: memory@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: memory@46000000 { + compatible = "qcom,smem"; + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + cdsp_sec_mem: memory@46200000 { + reg = <0x0 0x46200000 0x0 0x1e00000>; + no-map; + }; + + pil_modem_mem: memory@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: memory@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: memory@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_cdsp_mem: memory@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1e00000>; + no-map; + }; + + pil_adsp_mem: memory@53800000 { + reg = <0x0 0x53800000 0x0 0x2800000>; + no-map; + }; + + pil_ipa_fw_mem: memory@56100000 { + reg = <0x0 0x56100000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@56110000 { + reg = <0x0 0x56110000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: memory@56115000 { + reg = <0x0 0x56115000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: memory@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: memory@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: memory@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b01000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sm6115"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,sm6115-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp5 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; + }; + }; + }; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 30>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x00340000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,sm6115-tlmm"; + reg = <0x0 0x00500000 0x0 0x400000>, + <0x0 0x00900000 0x0 0x400000>, + <0x0 0x00d00000 0x0 0x400000>; + reg-names = "west", "south", "east"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; /* GPIOs + ufs_reset */ + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio4", "gpio5"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio8", "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio14", "gpio15"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1","gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi1_default: qup-spi1-default-state { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi2_default: qup-spi2-default-state { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi3_default: qup-spi3-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi4_default: qup-spi4-default-state { + pins = "gpio12", "gpio13", "gpio96", "gpio97"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi5_default: qup-spi5-default-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-sm6115"; + reg = <0x0 0x01400000 0x0 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + usb_hsphy: phy@1613000 { + compatible = "qcom,sm6115-qusb2-phy"; + reg = <0x0 0x01613000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + + status = "disabled"; + }; + + qfprom@1b40000 { + compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; + reg = <0x0 0x01b40000 0x0 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + }; + + rng: rng@1b53000 { + compatible = "qcom,prng-ee"; + reg = <0x0 0x01b53000 0x0 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x01c40000 0x0 0x1100>, + <0x0 0x01e00000 0x0 0x2000000>, + <0x0 0x03e00000 0x0 0x100000>, + <0x0 0x03f00000 0x0 0xa0000>, + <0x0 0x01c0a000 0x0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tsens0: thermal-sensor@4410000 { + compatible = "qcom,sm6115-tsens", "qcom,tsens-v2"; + reg = <0x0 0x04411000 0x0 0x1ff>, /* TM */ + <0x0 0x04410000 0x0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x0 0x045f0000 0x0 0x7000>; + }; + + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x0 0x04690000 0x0 0x10000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04744000 0x0 0x1000>, + <0x0 0x04745000 0x0 0x1000>, + <0x0 0x04748000 0x0 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", "core", "xo", "ice"; + + bus-width = <8>; + status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04784000 0x0 0x1000>; + reg-names = "hc"; + + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + + power-domains = <&rpmpd SM6115_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0x00a0 0x0>; + resets = <&gcc GCC_SDCC2_BCR>; + + bus-width = <4>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + ufs_mem_hc: ufs@4804000 { + compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>; + reg-names = "std", "ice"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <1>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + iommus = <&apps_smmu 0x100 0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "ice_core_clk"; + + freq-table-hz = <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <75000000 300000000>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@4807000 { + compatible = "qcom,sm6115-qmp-ufs-phy"; + reg = <0x0 0x04807000 0x0 0x1c4>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@4807400 { + reg = <0x0 0x04807400 0x0 0x098>, + <0x0 0x04807600 0x0 0x130>, + <0x0 0x04807c00 0x0 0x16c>; + #phy-cells = <0>; + }; + }; + + gpi_dma0: dma-controller@4a00000 { + compatible = "qcom,sm6115-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x04a00000 0x0 0x60000>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0xf>; + iommus = <&apps_smmu 0xf6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x04ac0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0xe3 0x0>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@4a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@4a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@4a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@4a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@4a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@4a90000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x04a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c5: i2c@4a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a94000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@4a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a94000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usb: usb@4ef8800 { + compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; + reg = <0x0 0x04ef8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <66666667>; + + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + qcom,select-utmi-as-pipe-clk; + status = "disabled"; + + usb_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x04e00000 0x0 0xcd00>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + }; + }; + + gpucc: clock-controller@5990000 { + compatible = "qcom,sm6115-gpucc"; + reg = <0x0 0x05990000 0x0 0x9000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@59a0000 { + compatible = "qcom,sm6115-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x059a0000 0x0 0x10000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "mem", + "hlos", + "iface"; + power-domains = <&gpucc GPU_CX_GDSC>; + + #global-interrupts = <1>; + #iommu-cells = <2>; + }; + + mdss: display-subsystem@5e00000 { + compatible = "qcom,sm6115-mdss"; + reg = <0x0 0x05e00000 0x0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdp: display-controller@5e01000 { + compatible = "qcom,sm6115-dpu"; + reg = <0x0 0x05e01000 0x0 0x8f000>, + <0x0 0x05eb0000 0x0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "iface", + "core", + "lut", + "rot", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@5e94000 { + compatible = "qcom,sm6115-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x05e94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_svs>; + }; + }; + }; + + mdss_dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x0 0x05e94400 0x0 0x100>, + <0x0 0x05e94500 0x0 0x300>, + <0x0 0x05e94800 0x0 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@5f00000 { + compatible = "qcom,sm6115-dispcc"; + reg = <0x0 0x05f00000 0 0x20000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + remoteproc_mpss: remoteproc@6080000 { + compatible = "qcom,sm6115-mpss-pas"; + reg = <0x0 0x06080000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDDCX>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 12>; + }; + }; + + stm@8002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x0 0x08002000 0x0 0x1000>, + <0x0 0x0e280000 0x0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel_in0_in>; + }; + }; + }; + }; + + cti0: cti@8010000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08010000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti1: cti@8011000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08011000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti2: cti@8012000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08012000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti3: cti@8013000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08013000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti4: cti@8014000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08014000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti5: cti@8015000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08015000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti6: cti@8016000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08016000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti7: cti@8017000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08017000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti8: cti@8018000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08018000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti9: cti@8019000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x08019000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti10: cti@801a000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801a000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti11: cti@801b000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801b000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti12: cti@801c000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801c000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti13: cti@801d000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801d000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti14: cti@801e000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801e000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + cti15: cti@801f000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0801f000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + replicator@8046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x08046000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@8047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x08047000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etr@8048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x08048000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out>; + }; + }; + }; + }; + + funnel@8041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x08041000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_in0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + port { + funnel_in0_in: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@8042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x08042000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_in1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + port { + funnel_in1_in: endpoint { + remote-endpoint = <&funnel_apss1_out>; + }; + }; + }; + }; + + funnel@8045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x08045000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel_in0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel_in1_out>; + }; + }; + }; + }; + + etm@9040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09040000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU0>; + + status = "disabled"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_apss0_in0>; + }; + }; + }; + }; + + etm@9140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09140000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU1>; + + status = "disabled"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_apss0_in1>; + }; + }; + }; + }; + + etm@9240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09240000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU2>; + + status = "disabled"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_apss0_in2>; + }; + }; + }; + }; + + etm@9340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09340000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU3>; + + status = "disabled"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_apss0_in3>; + }; + }; + }; + }; + + etm@9440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09440000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU4>; + + status = "disabled"; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&funnel_apss0_in4>; + }; + }; + }; + }; + + etm@9540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09540000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU5>; + + status = "disabled"; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&funnel_apss0_in5>; + }; + }; + }; + }; + + etm@9640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09640000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU6>; + + status = "disabled"; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&funnel_apss0_in6>; + }; + }; + }; + }; + + etm@9740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0 0x09740000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU7>; + + status = "disabled"; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&funnel_apss0_in7>; + }; + }; + }; + }; + + funnel@9800000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x09800000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_apss0_out: endpoint { + remote-endpoint = <&funnel_apss1_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_apss0_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_apss0_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + funnel_apss0_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + funnel_apss0_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + funnel_apss0_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + funnel_apss0_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + funnel_apss0_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + funnel_apss0_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@9810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x09810000 0x0 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + + out-ports { + port { + funnel_apss1_out: endpoint { + remote-endpoint = <&funnel_in1_in>; + }; + }; + }; + + in-ports { + port { + funnel_apss1_in: endpoint { + remote-endpoint = <&funnel_apss0_out>; + }; + }; + }; + }; + + remoteproc_adsp: remoteproc@ab00000 { + compatible = "qcom,sm6115-adsp-pas"; + reg = <0x0 0x0ab00000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDD_LPI_CX>, + <&rpmpd SM6115_VDD_LPI_MX>; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x01c3 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x01c4 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x01c5 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x01c6 0x0>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x01c7 0x0>; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@b300000 { + compatible = "qcom,sm6115-cdsp-pas"; + reg = <0x0 0x0b300000 0x0 0x100000>; + + interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDDCX>; + + memory-region = <&pil_cdsp_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>; + label = "cdsp"; + qcom,remote-pid = <5>; + mboxes = <&apcs_glb 28>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0c01 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0c02 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0c03 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x0c04 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x0c05 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x0c06 0x0>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x0c600000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + }; + + wifi: wifi@c800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0x0 0x0c800000 0x0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + + watchdog@f017000 { + compatible = "qcom,apss-wdt-sm6115", "qcom,kpss-wdt"; + reg = <0x0 0x0f017000 0x0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,sm6115-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; + reg = <0x0 0x0f111000 0x0 0x1000>; + + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x0f120000 0x0 0x1000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-frequency = <19200000>; + + frame@f121000 { + reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@f123000 { + reg = <0x0 0x0f123000 0x0 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@f124000 { + reg = <0x0 0x0f124000 0x0 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@f125000 { + reg = <0x0 0x0f125000 0x0 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@f126000 { + reg = <0x0 0x0f126000 0x0 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@f127000 { + reg = <0x0 0x0f127000 0x0 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@f128000 { + reg = <0x0 0x0f128000 0x0 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0f200000 0x0 0x10000>, + <0x0 0x0f300000 0x0 0x100000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + cpufreq_hw: cpufreq@f521000 { + compatible = "qcom,sm6115-cpufreq-hw", "qcom,cpufreq-hw"; + reg = <0x0 0x0f521000 0x0 0x1000>, + <0x0 0x0f523000 0x0 0x1000>; + + reg-names = "freq-domain0", "freq-domain1"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + thermal-zones { + mapss-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cdsp-hvx-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu45-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + cpu45_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu45_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu45_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu67-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + cpu67_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu67_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu67_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0123-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + cpu0123_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0123_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0123_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + display-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 15>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts new file mode 100644 index 000000000000..ea3340d31110 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -0,0 +1,329 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2022 Linaro Limited + */ + +/dts-v1/; + +#include "sm6115.dtsi" +#include "pm6125.dtsi" + +/ { + model = "Lenovo Tab P11"; + compatible = "lenovo,j606f", "qcom,sm6115p", "qcom,sm6115"; + chassis-type = "tablet"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <445 0x10000>, <420 0x10000>; + qcom,board-id = <34 3>; + + aliases { + mmc0 = &sdhc_2; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (2000 * 1200 * 4)>; + width = <1200>; + height = <2000>; + stride = <(1200 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_n>; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + reserved-memory { + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x40000>; + ftrace-size = <0x20000>; + ecc-size = <16>; + }; + }; +}; + +&dispcc { + /* HACK: disable until a panel driver is ready to retain simplefb */ + status = "disabled"; +}; + +&pm6125_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm6115/LENOVO/J606F/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm6115/LENOVO/J606F/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm6115/LENOVO/J606F/modem.mbn"; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + pm6125_s6: s6 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1456000>; + }; + + pm6125_s7: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2080000>; + }; + + pm6125_s8: s8 { + regulator-min-microvolt = <1064000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l1: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + pm6125_l4: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + pm6125_l5: l5 { + regulator-min-microvolt = <1648000>; + /* 3.056V capped to 2.96V for SDHCI */ + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + /* Broken hw, this one can't be turned off or SDHCI will break! */ + regulator-always-on; + }; + + pm6125_l6: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + pm6125_l7: l7 { + /* 1.2V-1.304V fixed at 1.256V for SDHCI bias */ + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + /* + * TODO: SDHCI seems to also work with this one turned off, however + * there exists a possibility that it may not work with some very + * specific SDCard types, perhaps validating this against a wide + * range of models could rule that out, saving some power would + * certainly be nice.. + */ + regulator-always-on; + }; + + pm6125_l8: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + pm6125_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + pm6125_l10: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l11: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + }; + + pm6125_l12: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + pm6125_l13: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + pm6125_l14: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l15: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + pm6125_l16: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l17: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1384000>; + }; + + pm6125_l18: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1312000>; + }; + + pm6125_l19: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l20: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l21: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + }; + + pm6125_l22: l22 { + regulator-min-microvolt = <2952000>; + /* 3.304V capped to 2.96V for SDHCI */ + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + /* Broken hw, this one can't be turned off or SDHCI will break! */ + regulator-always-on; + }; + + pm6125_l23: l23 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l24: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_gate_pin>; + pinctrl-1 = <&sdc2_state_off>; + vmmc-supply = <&pm6125_l22>; + vqmmc-supply = <&pm6125_l5>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&tlmm { + gpio-reserved-ranges = <14 4>; + + /* + * This is a wholly undocumented pin (other than a single vague "pwr-gpios" reference) + * that needs to be toggled for the SD Card slot to work properly.. + */ + sdc2_gate_pin: sdc2-gate-state { + pins = "gpio45"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-high; + }; +}; + +&ufs_mem_hc { + vcc-supply = <&pm6125_l24>; + vcc-max-microamp = <600000>; + vccq2-supply = <&pm6125_l11>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&pm6125_l4>; + vdda-pll-supply = <&pm6125_l12>; + vddp-ref-clk-supply = <&pm6125_l18>; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdd-supply = <&pm6125_l4>; + vdda-pll-supply = <&pm6125_l12>; + vdda-phy-dpdm-supply = <&pm6125_l15>; + status = "okay"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&pm6125_l8>; + vdd-1.8-xo-supply = <&pm6125_l16>; + vdd-1.3-rfa-supply = <&pm6125_l17>; + vdd-3.3-ch0-supply = <&pm6125_l23>; + qcom,ath10k-calibration-variant = "Lenovo_P11"; + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 6a8b88cc4385..9f8a9ef398a2 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -6,9 +6,10 @@ /dts-v1/; #include "sm6125.dtsi" +#include "pm6125.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> #include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { /* required for bootloader to select correct board */ @@ -19,6 +20,11 @@ compatible = "sony,pdx201", "qcom,sm6125"; chassis-type = "handset"; + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + chosen { #address-cells = <2>; #size-cells = <2>; @@ -40,21 +46,22 @@ }; gpio-keys { - status = "okay"; compatible = "gpio-keys"; - autorepeat; - key-vol-dn { + pinctrl-0 = <&vol_down_n>; + pinctrl-names = "default"; + + key-volume-down { label = "Volume Down"; gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; linux,code = <KEY_VOLUMEDOWN>; - gpio-key,wakeup; debounce-interval = <15>; + linux,can-disable; + wakeup-source; }; }; - reserved_memory { + reserved-memory { #address-cells = <2>; #size-cells = <2>; debug_mem: memory@ffb00000 { @@ -80,15 +87,350 @@ no-map; }; }; + + thermal-zones { + rf-pa0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <5000>; + thermal-sensors = <&pm6125_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + rf-pa1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; }; &hsusb_phy1 { + vdd-supply = <&pm6125_l7>; + vdda-pll-supply = <&pm6125_l10>; + vdda-phy-dpdm-supply = <&pm6125_l15>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + /* NXP PN553 NFC @ 28 */ +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + /* Samsung touchscreen @ 48 */ +}; + +&i2c3 { + clock-frequency = <1000000>; + status = "okay"; + + /* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */ +}; + +&pm6125_adc { + pinctrl-names = "default"; + pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>; + + rf-pa0-therm@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + quiet-therm@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + camera-flash-therm@52 { + reg = <ADC5_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + emmc-ufs-therm@54 { + reg = <ADC5_GPIO3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + rf-pa1-therm@55 { + reg = <ADC5_GPIO4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; +}; + +&pm6125_adc_tm { + status = "okay"; + + rf-pa0-therm@0 { + reg = <0>; + io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + xo-therm@2 { + reg = <2>; + io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + rf-pa1-therm@3 { + reg = <3>; + io-channels = <&pm6125_adc ADC5_GPIO4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm6125_gpios { + camera_flash_therm: camera-flash-therm-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; + + emmc_ufs_therm: emmc-ufs-therm-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; + + rf_pa1_therm: rf-pa1-therm-state { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + linux,code = <KEY_VOLUMEUP>; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vdd_l2_l3_l4-supply = <&pm6125_l7>; + vdd_l5_l15_l19_l20_l21_l22-supply = <&pm6125_l10>; + + /* + * S3/S4 is VDD_CX + * S5 is VDD_MX/WCSS_MX + */ + + pm6125_s6: s6 { + regulator-min-microvolt = <936000>; + regulator-max-microvolt = <1422000>; + }; + + pm6125_l1: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + }; + + pm6125_l2: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1056000>; + }; + + pm6125_l3: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1064000>; + }; + + pm6125_l4: l4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + pm6125_l5: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm6125_l6: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + pm6125_l7: l7 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + pm6125_l8: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + pm6125_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + pm6125_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + pm6125_l11: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm6125_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1996000>; + }; + + pm6125_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + }; + + pm6125_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l15: l15 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3232000>; + }; + + pm6125_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + pm6125_l17: l17 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l18: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1264000>; + }; + + pm6125_l19: l19 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + pm6125_l20: l20 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + pm6125_l21: l21 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2856000>; + }; + + pm6125_l22: l22 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm6125_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l24: l24 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + }; +}; + +&qupv3_id_0 { status = "okay"; }; &sdc2_off_state { sd-cd-pins { pins = "gpio98"; + function = "gpio"; drive-strength = <2>; bias-disable; }; @@ -97,17 +439,36 @@ &sdc2_on_state { sd-cd-pins { pins = "gpio98"; + function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; &sdhc_1 { + vmmc-supply = <&pm6125_l24>; + vqmmc-supply = <&pm6125_l11>; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm6125_l22>; + vqmmc-supply = <&pm6125_l5>; + no-sdio; + no-mmc; status = "okay"; }; &tlmm { gpio-reserved-ranges = <22 2>, <28 6>; + + vol_down_n: vol-down-n-state { + pins = "gpio47"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts new file mode 100644 index 000000000000..b1038eb8cebc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -0,0 +1,421 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Lux Aliaga <they@mint.lgbt> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "sm6125.dtsi" +#include "pm6125.dtsi" + +/ { + model = "Xiaomi Mi A3"; + compatible = "xiaomi,laurel-sprout", "qcom,sm6125"; + chassis-type = "handset"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <394 0>; /* sm6125 v1 */ + qcom,board-id = <11 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (1560 * 720 * 4)>; + width = <720>; + height = <1560>; + stride = <(720 * 4)>; + format = "a8r8g8b8"; + }; + }; + + reserved-memory { + debug_mem: debug@ffb00000 { + reg = <0x0 0xffb00000 0x0 0xc0000>; + no-map; + }; + + last_log_mem: lastlog@ffbc0000 { + reg = <0x0 0xffbc0000 0x0 0x80000>; + no-map; + }; + + pstore_mem: ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc40000 0x0 0xc0000>; + record-size = <0x1000>; + console-size = <0x40000>; + msg-size = <0x20000 0x20000>; + }; + + cmdline_mem: memory@ffd00000 { + reg = <0x0 0xffd40000 0x0 0x1000>; + no-map; + }; + }; + + extcon_usb: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + thermal-zones { + rf-pa0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <5000>; + thermal-sensors = <&pm6125_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; + +&hsusb_phy1 { + vdd-supply = <&vreg_l7a>; + vdda-pll-supply = <&vreg_l10a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&pm6125_adc { + pinctrl-names = "default"; + pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>; + + adc-chan@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "rf_pa0_therm"; + }; + + adc-chan@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "quiet_therm"; + }; + + adc-chan@52 { + reg = <ADC5_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "camera_flash_therm"; + }; + + adc-chan@54 { + reg = <ADC5_GPIO3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "emmc_ufs_therm"; + }; +}; + +&pm6125_adc_tm { + status = "okay"; + + rf-pa0-therm@0 { + reg = <0>; + io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + xo-therm@2 { + reg = <2>; + io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm6125_gpios { + camera_flash_therm: camera-flash-therm-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; + + emmc_ufs_therm: emmc-ufs-therm-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; + + vol_up_n: vol-up-n-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-up; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vreg_s6a: s6 { + regulator-min-microvolt = <936000>; + regulator-max-microvolt = <1422000>; + }; + + vreg_l1a: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + }; + + vreg_l2a: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1056000>; + }; + + vreg_l3a: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1064000>; + }; + + vreg_l4a: l4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + regulator-allow-set-load; + }; + + vreg_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a: l7 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + vreg_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + vreg_l10a: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + regulator-allow-set-load; + }; + + vreg_l11a: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + regulator-allow-set-load; + }; + + vreg_l12a: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1996000>; + }; + + vreg_l13a: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + }; + + vreg_l14a: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a: l15 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a: l17 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1264000>; + regulator-allow-set-load; + }; + + vreg_l19a: l19 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l20a: l20 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l21a: l21 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2856000>; + }; + + vreg_l22a: l22 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l23a: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l24a: l24 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + }; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <22 2>, <28 6>; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l24a>; + vccq2-supply = <&vreg_l11a>; + vcc-max-microamp = <600000>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l10a>; + vdda-phy-max-microamp = <51400>; + vdda-pll-max-microamp = <14200>; + vddp-ref-clk-supply = <&vreg_l18a>; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + extcon = <&extcon_usb>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 1fe3fa3ad877..2aa093d16858 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/qcom,gcc-sm6125.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -45,6 +46,8 @@ next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -84,6 +87,8 @@ next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -407,13 +412,13 @@ }; sdc2_on_state: sdc2-on-state { - clk { + clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - cmd-pins-pins { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; @@ -425,6 +430,230 @@ bias-pull-up; }; }; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup00"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c0_sleep: qup-i2c0-sleep-state { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio4", "gpio5"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c1_sleep: qup-i2c1-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "qup02"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c2_sleep: qup-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio14", "gpio15"; + function = "qup03"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c3_sleep: qup-i2c3-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio16", "gpio17"; + function = "qup04"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c4_sleep: qup-i2c4-sleep-state { + pins = "gpio16", "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio22", "gpio23"; + function = "qup10"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c5_sleep: qup-i2c5-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio30", "gpio31"; + function = "qup11"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c6_sleep: qup-i2c6-sleep-state { + pins = "gpio30", "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio28", "gpio29"; + function = "qup12"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c7_sleep: qup-i2c7-sleep-state { + pins = "gpio28", "gpio29"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio18", "gpio19"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c8_sleep: qup-i2c8-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio10", "gpio11"; + function = "qup14"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c9_sleep: qup-i2c9-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup00"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_sleep: qup-spi0-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_default: qup-spi2-default-state { + pins = "gpio6", "gpio7", "gpio8", "gpio9"; + function = "qup02"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_sleep: qup-spi2-sleep-state { + pins = "gpio6", "gpio7", "gpio8", "gpio9"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_default: qup-spi5-default-state { + pins = "gpio22", "gpio23", "gpio24", "gpio25"; + function = "qup10"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_sleep: qup-spi5-sleep-state { + pins = "gpio22", "gpio23", "gpio24", "gpio25"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_default: qup-spi6-default-state { + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + function = "qup11"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_sleep: qup-spi6-sleep-state { + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_default: qup-spi8-default-state { + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + function = "qup13"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_sleep: qup-spi8-sleep-state { + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_default: qup-spi9-default-state { + pins = "gpio10", "gpio11", "gpio12", "gpio13"; + function = "qup14"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_sleep: qup-spi9-sleep-state { + pins = "gpio10", "gpio11", "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; }; gcc: clock-controller@1400000 { @@ -442,9 +671,9 @@ reg = <0x01613000 0x180>; #phy-cells = <0>; - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, - <&gcc GCC_AHB2PHY_USB_CLK>; - clock-names = "ref", "cfg_ahb"; + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; status = "disabled"; @@ -458,7 +687,7 @@ sdhc_1: mmc@4744000 { compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; reg = <0x04744000 0x1000>, <0x04745000 0x1000>; - reg-names = "hc", "core"; + reg-names = "hc", "cqhci"; interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -468,6 +697,7 @@ <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x160 0x0>; power-domains = <&rpmpd SM6125_VDDCX>; @@ -476,6 +706,8 @@ bus-width = <8>; non-removable; + supports-cqe; + status = "disabled"; }; @@ -492,6 +724,7 @@ <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x180 0x0>; pinctrl-0 = <&sdc2_on_state>; pinctrl-1 = <&sdc2_off_state>; @@ -506,6 +739,404 @@ status = "disabled"; }; + ufs_mem_hc: ufs@4804000 { + compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x04804000 0x3000>, <0x04810000 0x8000>; + reg-names = "std", "ice"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "ice_core_clk"; + freq-table-hz = <50000000 240000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <75000000 300000000>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + #reset-cells = <1>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + lanes-per-direction = <1>; + + iommus = <&apps_smmu 0x200 0x0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@4807000 { + compatible = "qcom,sm6125-qmp-ufs-phy"; + reg = <0x04807000 0xdb8>; + + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", + "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + gpi_dma0: dma-controller@4a00000 { + compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0x04a00000 0x60000>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <8>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0x136 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x04ac0000 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x123 0x0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a80000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c0_default>; + pinctrl-1 = <&qup_i2c0_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x04a80000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_spi0_default>; + pinctrl-1 = <&qup_spi0_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a84000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-1 = <&qup_i2c1_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a88000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c2_default>; + pinctrl-1 = <&qup_i2c2_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x04a88000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_spi2_default>; + pinctrl-1 = <&qup_spi2_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@4a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a8c000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c3_default>; + pinctrl-1 = <&qup_i2c3_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@4a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x04a90000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c4_default>; + pinctrl-1 = <&qup_i2c4_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@4c00000 { + compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0x04c00000 0x60000>; + interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <8>; + dma-channel-mask = <0x0f>; + iommus = <&apps_smmu 0x156 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@4cc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x04cc0000 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x143 0x0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + i2c5: i2c@4c80000 { + compatible = "qcom,geni-i2c"; + reg = <0x04c80000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c5_default>; + pinctrl-1 = <&qup_i2c5_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@4c80000 { + compatible = "qcom,geni-spi"; + reg = <0x04c80000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_spi5_default>; + pinctrl-1 = <&qup_spi5_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@4c84000 { + compatible = "qcom,geni-i2c"; + reg = <0x04c84000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c6_default>; + pinctrl-1 = <&qup_i2c6_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@4c84000 { + compatible = "qcom,geni-spi"; + reg = <0x04c84000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_spi6_default>; + pinctrl-1 = <&qup_spi6_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@4c88000 { + compatible = "qcom,geni-i2c"; + reg = <0x04c88000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c7_default>; + pinctrl-1 = <&qup_i2c7_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@4c8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x04c8c000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c8_default>; + pinctrl-1 = <&qup_i2c8_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@4c8c000 { + compatible = "qcom,geni-spi"; + reg = <0x04c8c000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_spi8_default>; + pinctrl-1 = <&qup_spi8_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@4c90000 { + compatible = "qcom,geni-i2c"; + reg = <0x04c90000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_i2c9_default>; + pinctrl-1 = <&qup_i2c9_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@4c90000 { + compatible = "qcom,geni-spi"; + reg = <0x04c90000 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_spi9_default>; + pinctrl-1 = <&qup_spi9_sleep>; + pinctrl-names = "default", "sleep"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + usb3: usb@4ef8800 { compatible = "qcom,sm6125-dwc3", "qcom,dwc3"; reg = <0x04ef8800 0x400>; @@ -538,6 +1169,7 @@ compatible = "snps,dwc3"; reg = <0x04e00000 0xcd00>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x100 0x0>; phys = <&hsusb_phy1>; phy-names = "usb2-phy"; snps,dis_u2_susphy_quirk; @@ -568,11 +1200,84 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0xc600000 0x80000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + + #global-interrupts = <1>; + #iommu-cells = <2>; }; apcs_glb: mailbox@f111000 { - compatible = "qcom,sm6125-apcs-hmss-global"; + compatible = "qcom,sm6125-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x0f111000 0x1000>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index 36911b9a5c04..dddd6e44d280 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -4,7 +4,10 @@ */ /dts-v1/; +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm6350.dtsi" +#include "pm6350.dtsi" / { model = "Sony Xperia 10 III"; @@ -28,16 +31,343 @@ clocks = <&gcc GCC_DISP_AXI_CLK>; }; }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&vol_down_n>; + + key-volume-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; + + touch_en_vreg: touch-en-regulator { + compatible = "regulator-fixed"; + regulator-name = "touch_en_vreg"; + gpio = <&tlmm 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&pm6350_l6>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6350-rpmh-regulators"; + qcom,pmic-id = "a"; + + pm6350_s1: smps1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_s2: smps2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <2048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l2: ldo2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l3: ldo3 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l4: ldo4 { + regulator-min-microvolt = <352000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l5: ldo5 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l6: ldo6 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l7: ldo7 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l8: ldo8 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l9: ldo9 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l11: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l12: ldo12 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l13: ldo13 { + regulator-min-microvolt = <570000>; + regulator-max-microvolt = <650000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l14: ldo14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l15: ldo15 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l16: ldo16 { + regulator-min-microvolt = <830000>; + regulator-max-microvolt = <921000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l18: ldo18 { + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1049000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l19: ldo19 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l20: ldo20 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l21: ldo21 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <825000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6350_l22: ldo22 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "e"; + + pm6150l_s8: smps8 { + regulator-min-microvolt = <313000>; + regulator-max-microvolt = <1395000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l1: ldo1 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l2: ldo2 { + regulator-min-microvolt = <1170000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l3: ldo3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1299000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l4: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l5: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l6: ldo6 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l7: ldo7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l8: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l9: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l10: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_l11: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm6150l_bob: bob { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <5492000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c8 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <22 0x2008>; + vdd-supply = <&pm6350_l11>; + avdd-supply = <&touch_en_vreg>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default &ts_active>; + }; +}; + +&pm6350_gpios { + vol_down_n: vol-down-n-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-disable; + input-enable; + }; +}; + +&pm6350_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &sdhc_2 { status = "okay"; + vmmc-supply = <&pm6150l_l9>; + vqmmc-supply = <&pm6150l_l6>; + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; }; &tlmm { gpio-reserved-ranges = <13 4>, <45 2>, <56 2>; + + ts_active: ts-active-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index c39de7d3ace0..ad34301f6cdd 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -6,11 +6,15 @@ #include <dt-bindings/clock/qcom,gcc-sm6350.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm6350-camcc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sm6350.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -42,17 +46,26 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; + cache-unified; }; }; }; @@ -61,14 +74,21 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -77,14 +97,21 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -93,14 +120,21 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -109,14 +143,21 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -125,31 +166,44 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1894>; dynamic-power-coefficient = <703>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -158,14 +212,21 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1894>; dynamic-power-coefficient = <703>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -220,6 +281,112 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + /* DDR: 4-wide, 2 channels, double data rate, L3: 16-wide, 2 channels */ + opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <(547000 * 4 * 2 * 2) (556800 * 16 * 2)>; + }; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>; + }; + + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>; + }; + + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>; + }; + + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1286400 * 16 * 2)>; + }; + + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + + opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + }; + + cpu6_opp_table: opp-table-cpu6 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>; + }; + + opp-787200000 { + opp-hz = /bits/ 64 <787200000>; + opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>; + }; + + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <(768000 * 4 * 2 * 2) (940800 * 16 * 2)>; + }; + + opp-1036800000 { + opp-hz = /bits/ 64 <1036800000>; + opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>; + }; + + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>; + }; + + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1401600 * 16 * 2)>; + }; + + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + + opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>; @@ -342,13 +509,12 @@ }; ramoops: ramoops@ffc00000 { - compatible = "removed-dma-pool", "ramoops"; - reg = <0 0xffc00000 0 0x00100000>; + compatible = "ramoops"; + reg = <0 0xffc00000 0 0x100000>; record-size = <0x1000>; console-size = <0x40000>; - ftrace-size = <0x0>; msg-size = <0x20000 0x20000>; - cc-size = <0x0>; + ecc-size = <16>; no-map; }; @@ -432,7 +598,17 @@ modem_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; interrupt-controller; #interrupt-cells = <2>; }; @@ -485,11 +661,13 @@ interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; + iommus = <&apps_smmu 0x60 0x0>; clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; qcom,dll-config = <0x000f642c>; qcom,ddr-config = <0x80040868>; power-domains = <&rpmhpd SM6350_CX>; @@ -542,7 +720,7 @@ qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; - reg = <0x0 0x8c0000 0x0 0x2000>; + reg = <0x0 0x008c0000 0x0 0x2000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; @@ -615,7 +793,7 @@ qupv3_id_1: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; - reg = <0x0 0x9c0000 0x0 0x2000>; + reg = <0x0 0x009c0000 0x0 0x2000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; @@ -687,7 +865,7 @@ uart9: serial@98c000 { compatible = "qcom,geni-debug-uart"; - reg = <0 0x98c000 0 0x4000>; + reg = <0 0x0098c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; @@ -718,7 +896,6 @@ interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; - }; config_noc: interconnect@1500000 { @@ -845,6 +1022,43 @@ }; }; + ipa: ipa@1e40000 { + compatible = "qcom,sm6350-ipa"; + + iommus = <&apps_smmu 0x440 0x0>, + <&apps_smmu 0x442 0x0>; + reg = <0 0x01e40000 0 0x8000>, + <0 0x01e50000 0 0x3000>, + <0 0x01e04000 0 0x23000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &clk_virt SLAVE_EBI_CH0 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_OCIMEM 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_IPA_CFG 0>; + interconnect-names = "memory", "imem", "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -1063,15 +1277,21 @@ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; + iommus = <&apps_smmu 0x560 0x0>; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>; interconnect-names = "sdhc-ddr", "cpu-sdhc"; + pinctrl-0 = <&sdc2_on_state>; + pinctrl-1 = <&sdc2_off_state>; + pinctrl-names = "default", "sleep"; + qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; power-domains = <&rpmhpd SM6350_CX>; @@ -1111,53 +1331,26 @@ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; }; - usb_1_qmpphy: phy@88e9000 { - compatible = "qcom,sc7180-qmp-usb3-dp-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x40>, - <0 0x088ea000 0 0x200>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sm6350-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&xo_board>, - <&rpmhcc RPMH_QLINK_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB30_PRIM_GDSC>; - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, - <&gcc GCC_USB3_PHY_PRIM_BCR>; + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: usb3-phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; - dp_phy: dp-phy@88ea200 { - reg = <0 0x088ea200 0 0x200>, - <0 0x088ea400 0 0x200>, - <0 0x088eac00 0 0x400>, - <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>, - <0 0x088eaa00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <1>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + status = "disabled"; }; dc_noc: interconnect@9160000 { @@ -1170,7 +1363,7 @@ system-cache-controller@9200000 { compatible = "qcom,sm6350-llcc"; reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg-names = "llcc0_base", "llcc_broadcast_base"; }; gem_noc: interconnect@9680000 { @@ -1231,11 +1424,109 @@ snps,dis_enblslpm_quirk; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; }; }; + cci0: cci@ac4a000 { + compatible = "qcom,sm6350-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4a000 0 0x1000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SOC_AHB_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_0_CLK>, + <&camcc CAMCC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "soc_ahb", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + assigned-clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_CCI_0_CLK>; + assigned-clock-rates = <80000000>, <37500000>; + + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac4b000 { + compatible = "qcom,sm6350-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4b000 0 0x1000>; + interrupts = <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_SOC_AHB_CLK>, + <&camcc CAMCC_SLOW_AHB_CLK_SRC>, + <&camcc CAMCC_CPAS_AHB_CLK>, + <&camcc CAMCC_CCI_1_CLK>, + <&camcc CAMCC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "soc_ahb", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + assigned-clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>, + <&camcc CAMCC_CCI_1_CLK>; + assigned-clock-rates = <80000000>, <37500000>; + + pinctrl-0 = <&cci2_default>; + pinctrl-1 = <&cci2_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* SM6350 seems to have cci1_i2c1 on gpio2 & gpio3 but unused downstream */ + }; + + camcc: clock-controller@ad00000 { + compatible = "qcom,sm6350-camcc"; + reg = <0 0x0ad00000 0 0x16000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm6350-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>; @@ -1268,7 +1559,7 @@ #thermal-sensor-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x1000>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP @@ -1280,11 +1571,11 @@ spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0 0xc440000 0 0x1100>, - <0 0xc600000 0 0x2000000>, - <0 0xe600000 0 0x100000>, - <0 0xe700000 0 0xa0000>, - <0 0xc40a000 0 0x26000>; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; @@ -1314,6 +1605,88 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 157>; + cci0_default: cci0-default-state { + pins = "gpio39", "gpio40"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_sleep: cci0-sleep-state { + pins = "gpio39", "gpio40"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_default: cci1-default-state { + pins = "gpio41", "gpio42"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_sleep: cci1-sleep-state { + pins = "gpio41", "gpio42"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci2_default: cci2-default-state { + pins = "gpio43", "gpio44"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci2_sleep: cci2-sleep-state { + pins = "gpio43", "gpio44"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + sdc2_off_state: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_on_state: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + qup_uart9_default: qup-uart9-default-state { pins = "gpio25", "gpio26"; function = "qup13_f2"; @@ -1626,14 +1999,25 @@ }; }; + osm_l3: interconnect@18321000 { + compatible = "qcom,sm6350-osm-l3", "qcom,osm-l3"; + reg = <0x0 0x18321000 0x0 0x1000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sm6350-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>; reg-names = "freq-domain0", "freq-domain1"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts new file mode 100644 index 000000000000..b2f1bb1d58e9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts @@ -0,0 +1,433 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +/* PMK8350 is configured to use SID6 instead of 0 */ +#define PMK8350_SID 6 + +#include <dt-bindings/gpio/gpio.h> +#include "sm6375.dtsi" +#include "pm6125.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" + +/* PM6125 PON is used and we can't have duplicate labels */ +/delete-node/ &pmk8350_pon; + +/ { + model = "Sony Xperia 10 IV"; + compatible = "sony,pdx225", "qcom,sm6375"; + chassis-type = "handset"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@85200000 { + compatible = "simple-framebuffer"; + reg = <0 0x85200000 0 0xc00000>; + + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + /* + * That's (going to be) a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet + */ + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_THROTTLE_CORE_CLK>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&vol_down_n>; + pinctrl-names = "default"; + + key-volume-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + reserved-memory { + cont_splash_mem: memory@85200000 { + reg = <0 0x85200000 0 0xc00000>; + no-map; + }; + + ramoops@ffc40000 { + compatible = "ramoops"; + reg = <0 0xffc40000 0 0xb0000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm6125_l22>; + vqmmc-supply = <&pm6125_l5>; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&i2c8 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <22 0x2008>; + + vdd-supply = <&pm6125_l13>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_default &ts_avdd_default>; + }; +}; + +&pmk8350_adc_tm { + status = "okay"; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pmr735a_gpios { + vol_down_n: vol-down-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm6375/Sony/murray/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm6375/Sony/murray/cdsp.mbn"; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + pm6125_s5: s5 { + regulator-min-microvolt = <382000>; + regulator-max-microvolt = <1120000>; + }; + + pm6125_s6: s6 { + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <1374000>; + }; + + pm6125_s7: s7 { + regulator-min-microvolt = <1574000>; + regulator-max-microvolt = <2040000>; + }; + + /* + * S8 is VDD_GFX + * L1 is VDD_LPI_CX + */ + + pm6125_l2: l2 { + regulator-min-microvolt = <1170000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l3: l3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + + pm6125_l4: l4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + + pm6125_l5: l5 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + pm6125_l6: l6 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l7: l7 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + }; + + pm6125_l8: l8 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1304000>; + }; + + pm6125_l9: l9 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + }; + + pm6125_l10: l10 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + }; + + pm6125_l11: l11 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + }; + + pm6125_l12: l12 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + }; + + pm6125_l13: l13 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1980000>; + }; + + pm6125_l14: l14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + + pm6125_l15: l15 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + }; + + pm6125_l16: l16 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + }; + + /* L17 is VDD_LPI_MX */ + + pm6125_l18: l18 { + regulator-min-microvolt = <830000>; + regulator-max-microvolt = <920000>; + }; + + pm6125_l19: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l20: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + pm6125_l21: l21 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l22: l22 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + pm6125_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + pm6125_l24: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3544000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pmr735a-regulators"; + + /* + * S1 is VDD_MX + * S2 is VDD_CX + */ + + pmr735a_l1: l1 { + regulator-min-microvolt = <570000>; + regulator-max-microvolt = <650000>; + }; + + pmr735a_l2: l2 { + regulator-min-microvolt = <352000>; + regulator-max-microvolt = <796000>; + }; + + pmr735a_l3: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l4: l4 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + }; + + pmr735a_l5: l5 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + }; + + pmr735a_l6: l6 { + regulator-min-microvolt = <504000>; + regulator-max-microvolt = <868000>; + }; + + pmr735a_l7: l7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + }; + }; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm6125_l22>; + vqmmc-supply = <&pm6125_l5>; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>; + + ts_int_default: ts-int-default-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_avdd_default: ts-avdd-default-state { + pins = "gpio59"; + function = "gpio"; + drive-strength = <8>; + output-high; + }; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi new file mode 100644 index 000000000000..f8d9c34d3b2f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -0,0 +1,2309 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/clock/qcom,sm6375-gcc.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo660"; + reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <4001>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <523>; + exit-latency-us = <1244>; + min-residency-us = <2207>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <5555>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2752>; + exit-latency-us = <3048>; + min-residency-us = <6118>; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sm6375", "qcom,scm"; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CLUSTER_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hypervisor@80000000 { + reg = <0 0x80000000 0 0x600000>; + no-map; + }; + + xbl_aop_mem: xbl-aop@80700000 { + reg = <0 0x80700000 0 0x100000>; + no-map; + }; + + reserved_xbl_uefi: xbl-uefi-res@80880000 { + reg = <0 0x80880000 0 0x14000>; + no-map; + }; + + smem_mem: smem@80900000 { + compatible = "qcom,smem"; + reg = <0 0x80900000 0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + fw_mem: fw@80b00000 { + reg = <0 0x80b00000 0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-sec-heap@80c00000 { + reg = <0 0x80c00000 0 0x1e00000>; + no-map; + }; + + dfps_data_mem: dpfs-data@85e00000 { + reg = <0 0x85e00000 0 0x100000>; + no-map; + }; + + pil_wlan_mem: pil-wlan@86500000 { + reg = <0 0x86500000 0 0x200000>; + no-map; + }; + + pil_adsp_mem: pil-adsp@86700000 { + reg = <0 0x86700000 0 0x2000000>; + no-map; + }; + + pil_cdsp_mem: pil-cdsp@88700000 { + reg = <0 0x88700000 0 0x1e00000>; + no-map; + }; + + pil_video_mem: pil-video@8a500000 { + reg = <0 0x8a500000 0 0x500000>; + no-map; + }; + + pil_ipa_fw_mem: pil-ipa-fw@8aa00000 { + reg = <0 0x8aa00000 0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: pil-ipa-gsi@8aa10000 { + reg = <0 0x8aa10000 0 0xa000>; + no-map; + }; + + pil_gpu_micro_code_mem: pil-gpu-ucode@8aa1a000 { + reg = <0 0x8aa1a000 0 0x2000>; + no-map; + }; + + pil_mpss_wlan_mem: pil-mpss-wlan@8b800000 { + reg = <0 0x8b800000 0 0x10000000>; + no-map; + }; + + removed_mem: removed@c0000000 { + reg = <0 0xc0000000 0 0x5100000>; + no-map; + }; + + rmtfs_mem: rmtfs@f3900000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf3900000 0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; + }; + + debug_mem: debug@ffb00000 { + reg = <0 0xffb00000 0 0xc0000>; + no-map; + }; + + last_log_mem: lastlog@ffbc0000 { + reg = <0 0xffbc0000 0 0x80000>; + no-map; + }; + + cmdline_region: cmdline@ffd00000 { + reg = <0 0xffd00000 0 0x1000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sm6375"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc"; + clocks = <&xo_board_clk>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,sm6375-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <RPM_SMD_LEVEL_RETENTION>; + }; + + rpmpd_opp_min_svs: opp2 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp4 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp5 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp6 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp7 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp8 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + + rpmpd_opp_turbo_no_cpr: opp9 { + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; + }; + }; + }; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + ipcc: mailbox@208000 { + compatible = "qcom,sm6375-ipcc", "qcom,ipcc"; + reg = <0 0x00208000 0 0x1000>; + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x00340000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,sm6375-tlmm"; + reg = <0 0x00500000 0 0x800000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 157>; + /* TODO: Hook up MPM as wakeup-parent when it's there */ + interrupt-controller; + gpio-controller; + #interrupt-cells = <2>; + #gpio-cells = <2>; + + sdc2_off_state: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_on_state: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup00"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio61", "gpio62"; + function = "qup01"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio45", "gpio46"; + function = "qup02"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio19", "gpio20"; + /* TLMM, GCC and vendor DT all have different indices.. */ + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio4", "gpio5"; + function = "qup10"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup00"; + drive-strength = <6>; + bias-disable; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,sm6375-gcc"; + reg = <0 0x01400000 0 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_XO_A_CLK_SRC>, + <&sleep_clk>; + #power-domain-cells = <1>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + usb_1_hsphy: phy@162b000 { + compatible = "qcom,sm6375-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x0162b000 0 0x400>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + #phy-cells = <0>; + + status = "disabled"; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x01c40000 0 0x1100>, + <0 0x01e00000 0 0x2000000>, + <0 0x03e00000 0 0x100000>, + <0 0x03f00000 0 0xa0000>, + <0 0x01c0a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tsens0: thermal-sensor@4411000 { + compatible = "qcom,sm6375-tsens", "qcom,tsens-v2"; + reg = <0 0x04411000 0 0x140>, /* TM */ + <0 0x04410000 0 0x20>; /* SROT */ + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + #qcom,sensors = <15>; + }; + + tsens1: thermal-sensor@4413000 { + compatible = "qcom,sm6375-tsens", "qcom,tsens-v2"; + reg = <0 0x04413000 0 0x140>, /* TM */ + <0 0x04412000 0 0x20>; /* SROT */ + interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + #qcom,sensors = <11>; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0 0x045f0000 0 0x7000>; + }; + + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0 0x04690000 0 0x400>; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x04784000 0 0x1000>; + + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + iommus = <&apps_smmu 0x40 0x0>; + + pinctrl-0 = <&sdc2_on_state>; + pinctrl-1 = <&sdc2_off_state>; + pinctrl-names = "default", "sleep"; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + }; + }; + + gpi_dma0: dma-controller@4a00000 { + compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x04a00000 0 0x60000>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0x16 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x04ac0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@4a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* + * As per GCC, QUP3/4/5/11 also exist, but are not even defined downstream. + * There is a comment in the included DTSI of another SoC saying that they + * are not "bolled out" (probably meaning not routed to solder balls) + * TLMM driver however, suggests there are as many as 15 QUPs in total! + * Most of which don't even have pin configurations for.. Sad stuff! + */ + }; + + gpi_dma1: dma-controller@4c00000 { + compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x04c00000 0 0x60000>; + interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0xd6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@4cc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x04cc0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0xc3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c6: i2c@4c80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04c80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@4c80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04c80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@4c84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04c84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@4c84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04c84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@4c88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04c88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@4c88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04c88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@4c8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04c8c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@4c8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04c8c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@4c90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04c90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@4c90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04c90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usb_1: usb@4ef8800 { + compatible = "qcom,sm6375-dwc3", "qcom,dwc3"; + reg = <0 0x04ef8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133333333>; + + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + /* + * This property is there to allow USB2 to work, as + * USB3 is not implemented yet - (re)move it when + * proper support is in place. + */ + qcom,select-utmi-as-pipe-clk; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0 0x04e00000 0 0xcd00>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + maximum-speed = "high-speed"; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0xe0 0x0>; + + /* Yes, this impl *does* have an unfunny number of quirks.. */ + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,is-utmi-l1-suspend; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,usb3_lpm_capable; + snps,has-lpm-erratum; + tx-fifo-resize; + }; + }; + + remoteproc_mss: remoteproc@6000000 { + compatible = "qcom,sm6375-mpss-pas"; + reg = <0 0x06000000 0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6375_VDDCX>; + power-domain-names = "cx"; + + memory-region = <&pil_mpss_wlan_mem>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + + remoteproc_adsp: remoteproc@a400000 { + compatible = "qcom,sm6375-adsp-pas"; + reg = <0 0x0a400000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6375_VDD_LPI_CX>, + <&rpmpd SM6375_VDD_LPI_MX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + + remoteproc_cdsp: remoteproc@b000000 { + compatible = "qcom,sm6375-cdsp-pas"; + reg = <0x0 0x0b000000 0x0 0x100000>; + + interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6375_VDDCX>; + power-domain-names = "cx"; + + memory-region = <&pil_cdsp_mem>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "cdsp"; + qcom,remote-pid = <5>; + }; + }; + + sram@c125000 { + compatible = "qcom,sm6375-imem", "syscon", "simple-mfd"; + reg = <0 0x0c125000 0 0x1000>; + ranges = <0 0 0x0c125000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,sm6375-smmu-500", "arm,mmu-500"; + reg = <0 0x0c600000 0 0x100000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_RT_GDSC>, + <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_NRT_GDSC>, + <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>; + #global-interrupts = <1>; + #iommu-cells = <2>; + }; + + wifi: wifi@c800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x0c800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&pil_wlan_mem>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x80 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0f200000 0x0 0x10000>, /* GICD */ + <0x0 0x0f240000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>; + #redistributor-regions = <1>; + #interrupt-cells = <3>; + redistributor-stride = <0 0x20000>; + interrupt-controller; + }; + + timer@f420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0 0x0f420000 0 0x1000>; + ranges = <0 0 0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@f421000 { + reg = <0x0f421000 0x1000>, <0x0f422000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@f423000 { + reg = <0x0f243000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@f425000 { + reg = <0x0f425000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@f427000 { + reg = <0x0f427000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@f429000 { + reg = <0x0f429000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@f42b000 { + reg = <0x0f42b000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@f42d000 { + reg = <0x0f42d000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + cpucp_l3: interconnect@fd90000 { + compatible = "qcom,sm6375-cpucp-l3", "qcom,epss-l3"; + reg = <0 0x0fd90000 0 0x1000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@fd91000 { + compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1"; + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + thermal-zones { + mapss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + mapss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss0_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-unk0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu_unk0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_unk0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_unk0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-unk1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu_unk1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_unk1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_unk1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 13>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss0_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 14>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss1_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mapss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + mapss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss1_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cwlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 1>; + + trips { + cwlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cwlan_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cwlan_crit: cwlan-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + audio-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 2>; + + trips { + audio_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + audio_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + audio_crit: audio-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 3>; + + trips { + ddr_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr_crit: ddr-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + q6hvx-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + q6hvx_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + q6hvx_crit: q6hvx-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_crit: camera-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm-core0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 6>; + + trips { + mdm_core0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_core0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_core0_crit: mdm-core0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm-core1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 7>; + + trips { + mdm_core1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_core1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_core1_crit: mdm-core1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm-vec-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 8>; + + trips { + mdm_vec_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_vec_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_vec_crit: mdm-vec-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + msm-scl-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 9>; + + trips { + msm_scl_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + msm_scl_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + msm_scl_crit: msm-scl-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 10>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 30c94fd4fe61..7ae6aba5d2ec 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -5,14 +5,20 @@ /dts-v1/; +/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */ +#define PMK8350_SID 6 + #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm7225.dtsi" #include "pm6150l.dtsi" #include "pm6350.dtsi" #include "pm7250b.dtsi" +#include "pmk8350.dtsi" / { model = "Fairphone 4"; @@ -104,12 +110,12 @@ }; &adsp { - status = "okay"; firmware-name = "qcom/sm7225/fairphone4/adsp.mdt"; + status = "okay"; }; &apps_rsc { - pm6350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm6350-rpmh-regulators"; qcom,pmic-id = "a"; @@ -238,7 +244,7 @@ }; }; - pm6150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm6150l-rpmh-regulators"; qcom,pmic-id = "e"; @@ -279,8 +285,11 @@ vreg_l6e: ldo6 { regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <3544000>; + regulator-max-microvolt = <2950000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7e: ldo7 { @@ -297,8 +306,11 @@ vreg_l9e: ldo9 { regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; + regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10e: ldo10 { @@ -322,14 +334,63 @@ }; }; -&cdsp { +&cci0 { + status = "okay"; +}; + +&cci0_i2c0 { + /* IMX582 @ 0x1a */ +}; + +&cci0_i2c1 { + /* IMX582 @ 0x1a */ +}; + +&cci1 { status = "okay"; +}; + +&cci1_i2c0 { + /* IMX576 @ 0x10 */ +}; + +&cdsp { firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; + status = "okay"; }; -&i2c10 { +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { status = "okay"; +}; + +&i2c0 { clock-frequency = <400000>; + status = "okay"; + + /* ST21NFCD NFC @ 8 */ + /* VL53L3 ToF @ 29 */ + /* AW88264A amplifier @ 34 */ + /* AW88264A amplifier @ 35 */ +}; + +&i2c8 { + clock-frequency = <400000>; + status = "okay"; + + /* HX83112A touchscreen @ 48 */ +}; + +&i2c10 { + clock-frequency = <400000>; + status = "okay"; + + /* PM8008 PMIC @ 8 and 9 */ + /* PX8618 @ 26 */ + /* SMB1395 PMIC @ 34 */ haptics@5a { compatible = "awinic,aw8695"; @@ -356,17 +417,46 @@ }; }; -&mpss { +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&pil_ipa_fw_mem>; + firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mdt"; status = "okay"; +}; + +&mpss { firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; + status = "okay"; }; -&pm6150l_wled { +&pm6150l_flash { status = "okay"; + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>; + led-max-microamp = <180000>; + flash-max-microamp = <1000000>; + flash-max-timeout-us = <1280000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>; + led-max-microamp = <180000>; + flash-max-microamp = <1000000>; + flash-max-timeout-us = <1280000>; + }; +}; + +&pm6150l_wled { qcom,switching-freq = <800>; qcom,current-limit-microamp = <20000>; qcom,num-strings = <2>; + + status = "okay"; }; &pm6350_gpios { @@ -380,8 +470,8 @@ }; &pm6350_resin { - status = "okay"; linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &pm7250b_adc { @@ -420,10 +510,55 @@ }; }; +&pmk8350_rtc { + status = "okay"; +}; + +&pmk8350_vadc { + adc-chan@644 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "xo_therm"; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; +&sdc2_off_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l9e>; + vqmmc-supply = <&vreg_l6e>; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <13 4>, <56 2>; }; @@ -433,21 +568,21 @@ }; &ufs_mem_hc { - status = "okay"; - reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l7e>; vcc-max-microamp = <800000>; vccq2-supply = <&vreg_l12a>; vccq2-max-microamp = <800000>; -}; -&ufs_mem_phy { status = "okay"; +}; +&ufs_mem_phy { vdda-phy-supply = <&vreg_l18a>; vdda-pll-supply = <&vreg_l22a>; + + status = "okay"; }; &usb_1 { @@ -460,26 +595,26 @@ }; &usb_1_hsphy { - status = "okay"; - vdd-supply = <&vreg_l18a>; vdda-pll-supply = <&vreg_l2a>; vdda-phy-dpdm-supply = <&vreg_l3a>; -}; -&usb_1_qmpphy { status = "okay"; +}; +&usb_1_qmpphy { vdda-phy-supply = <&vreg_l22a>; vdda-pll-supply = <&vreg_l16a>; -}; -&wifi { status = "okay"; +}; +&wifi { vdd-0.8-cx-mx-supply = <&vreg_l4a>; vdd-1.8-xo-supply = <&vreg_l7a>; vdd-1.3-rfa-supply = <&vreg_l2e>; vdd-3.3-ch0-supply = <&vreg_l10e>; vdd-3.3-ch1-supply = <&vreg_l11e>; + + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm7225.dtsi b/arch/arm64/boot/dts/qcom/sm7225.dtsi index 7b2a002ca7ff..b7b4044e9bb0 100644 --- a/arch/arm64/boot/dts/qcom/sm7225.dtsi +++ b/arch/arm64/boot/dts/qcom/sm7225.dtsi @@ -14,3 +14,22 @@ &CPU5 { compatible = "qcom,kryo570"; }; &CPU6 { compatible = "qcom,kryo570"; }; &CPU7 { compatible = "qcom,kryo570"; }; + +&cpu0_opp_table { + opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; +}; + +&cpu6_opp_table { + opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 3331ee957d64..c0200e7f3f74 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -56,7 +56,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -211,7 +211,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -324,7 +324,7 @@ }; }; - pm8009-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; @@ -359,6 +359,11 @@ }; &gpu { + /* + * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it + * after display support is added on this board. + */ + compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts index bb278ecac3fa..b039773c4465 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -61,7 +61,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -216,7 +216,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -329,7 +329,7 @@ }; }; - pm8009-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; @@ -475,11 +475,10 @@ &tlmm { gpio-reserved-ranges = <126 4>; - da7280_intr_default: da7280-intr-default { + da7280_intr_default: da7280-intr-default-state { pins = "gpio42"; function = "gpio"; bias-pull-up; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index 46b5cf9a1192..34ec84916bdd 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -51,7 +51,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -206,7 +206,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -319,7 +319,7 @@ }; }; - pm8009-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; @@ -354,6 +354,11 @@ }; &gpu { + /* + * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it + * after display support is added on this board. + */ + compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index 014fe3a31548..47e2430991ca 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -33,9 +33,10 @@ framebuffer: framebuffer@9c000000 { compatible = "simple-framebuffer"; reg = <0 0x9c000000 0 0x2300000>; - width = <1644>; - height = <3840>; - stride = <(1644 * 4)>; + /* Griffin BL initializes in 2.5k mode, not 4k */ + width = <1096>; + height = <2560>; + stride = <(1096 * 4)>; format = "a8r8g8b8"; /* * That's (going to be) a lot of clocks, but it's necessary due @@ -46,6 +47,40 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; + + key-camera-focus { + label = "Camera Focus"; + linux,code = <KEY_CAMERA_FOCUS>; + gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + linux,code = <KEY_CAMERA>; + gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-vol-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -138,7 +173,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -271,7 +306,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -348,6 +383,8 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_3p0: ldo7 { @@ -367,6 +404,8 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p3: ldo10 { @@ -390,8 +429,18 @@ /* Qcom SMB1355 @ c */ /* Qcom SMB1390 @ 10 */ - /* NXP PN553 NFC @ 28 */ /* Qcom FSA4480 USB-C audio switch @ 43 */ + + nfc@28 { + compatible = "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <47 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + }; }; &i2c7 { @@ -406,10 +455,43 @@ /* Samsung touchscreen @ 48 */ }; +&pm8150_gpios { + vol_down_n: vol-down-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pm8150b_gpios { + snapshot_n: snapshot-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio2"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + &pon_pwrkey { status = "okay"; }; +&pon_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index cef8c4f4f0ff..27dcda0d4288 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,dispcc-sm8150.h> #include <dt-bindings/clock/qcom,gcc-sm8150.h> #include <dt-bindings/clock/qcom,gpucc-sm8150.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> @@ -47,6 +48,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -60,9 +62,13 @@ #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; L3_0: l3-cache { - compatible = "cache"; + compatible = "cache"; + cache-level = <3>; + cache-unified; }; }; }; @@ -71,6 +77,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -84,15 +91,17 @@ #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; - }; CPU2: cpu@200 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -106,6 +115,8 @@ #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -114,6 +125,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -127,6 +139,8 @@ #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -135,6 +149,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; @@ -148,6 +163,8 @@ #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -156,6 +173,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; @@ -169,6 +187,8 @@ #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -177,6 +197,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; @@ -190,6 +211,8 @@ #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -198,6 +221,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <421>; @@ -211,6 +235,8 @@ #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -278,12 +304,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>; - local-timer-stop; }; }; }; @@ -600,55 +624,55 @@ compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD1: cpu1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD2: cpu2 { + CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD3: cpu3 { + CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD4: cpu4 { + CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD5: cpu5 { + CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD6: cpu6 { + CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD7: cpu7 { + CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CLUSTER_PD: cpu-cluster0 { + CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_SLEEP_0>; }; @@ -887,8 +911,8 @@ }; gpi_dma0: dma-controller@800000 { - compatible = "qcom,sm8150-gpi-dma"; - reg = <0 0x800000 0 0x60000>; + compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, @@ -926,7 +950,7 @@ power-domains = <&gcc EMAC_GDSC>; resets = <&gcc GCC_EMAC_BCR>; - iommus = <&apps_smmu 0x3C0 0x0>; + iommus = <&apps_smmu 0x3c0 0x0>; snps,tso; rx-fifo-depth = <4096>; @@ -935,6 +959,17 @@ status = "disabled"; }; + qfprom: efuse@784000 { + compatible = "qcom,sm8150-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@133 { + reg = <0x133 0x1>; + bits = <5 3>; + }; + }; qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; @@ -966,7 +1001,7 @@ spi0: spi@880000 { compatible = "qcom,geni-spi"; - reg = <0 0x880000 0 0x4000>; + reg = <0 0x00880000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; @@ -1000,7 +1035,7 @@ spi1: spi@884000 { compatible = "qcom,geni-spi"; - reg = <0 0x884000 0 0x4000>; + reg = <0 0x00884000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; @@ -1034,7 +1069,7 @@ spi2: spi@888000 { compatible = "qcom,geni-spi"; - reg = <0 0x888000 0 0x4000>; + reg = <0 0x00888000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; @@ -1068,7 +1103,7 @@ spi3: spi@88c000 { compatible = "qcom,geni-spi"; - reg = <0 0x88c000 0 0x4000>; + reg = <0 0x0088c000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; @@ -1102,7 +1137,7 @@ spi4: spi@890000 { compatible = "qcom,geni-spi"; - reg = <0 0x890000 0 0x4000>; + reg = <0 0x00890000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; @@ -1136,7 +1171,7 @@ spi5: spi@894000 { compatible = "qcom,geni-spi"; - reg = <0 0x894000 0 0x4000>; + reg = <0 0x00894000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; @@ -1170,7 +1205,7 @@ spi6: spi@898000 { compatible = "qcom,geni-spi"; - reg = <0 0x898000 0 0x4000>; + reg = <0 0x00898000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; @@ -1204,7 +1239,7 @@ spi7: spi@89c000 { compatible = "qcom,geni-spi"; - reg = <0 0x89c000 0 0x4000>; + reg = <0 0x0089c000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; @@ -1222,8 +1257,8 @@ }; gpi_dma1: dma-controller@a00000 { - compatible = "qcom,sm8150-gpi-dma"; - reg = <0 0xa00000 0 0x60000>; + compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, @@ -1274,7 +1309,7 @@ spi8: spi@a80000 { compatible = "qcom,geni-spi"; - reg = <0 0xa80000 0 0x4000>; + reg = <0 0x00a80000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; @@ -1308,7 +1343,7 @@ spi9: spi@a84000 { compatible = "qcom,geni-spi"; - reg = <0 0xa84000 0 0x4000>; + reg = <0 0x00a84000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; @@ -1324,6 +1359,20 @@ status = "disabled"; }; + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a84000 0x0 0x4000>; + reg-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart9_default>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c10: i2c@a88000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a88000 0 0x4000>; @@ -1342,7 +1391,7 @@ spi10: spi@a88000 { compatible = "qcom,geni-spi"; - reg = <0 0xa88000 0 0x4000>; + reg = <0 0x00a88000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; @@ -1376,7 +1425,7 @@ spi11: spi@a8c000 { compatible = "qcom,geni-spi"; - reg = <0 0xa8c000 0 0x4000>; + reg = <0 0x00a8c000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; @@ -1419,7 +1468,7 @@ spi12: spi@a90000 { compatible = "qcom,geni-spi"; - reg = <0 0xa90000 0 0x4000>; + reg = <0 0x00a90000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; @@ -1437,7 +1486,7 @@ i2c16: i2c@94000 { compatible = "qcom,geni-i2c"; - reg = <0 0x0094000 0 0x4000>; + reg = <0 0x00094000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, @@ -1453,7 +1502,7 @@ spi16: spi@a94000 { compatible = "qcom,geni-spi"; - reg = <0 0xa94000 0 0x4000>; + reg = <0 0x00a94000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; @@ -1471,8 +1520,8 @@ }; gpi_dma2: dma-controller@c00000 { - compatible = "qcom,sm8150-gpi-dma"; - reg = <0 0xc00000 0 0x60000>; + compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0 0x00c00000 0 0x60000>; interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, @@ -1524,7 +1573,7 @@ spi17: spi@c80000 { compatible = "qcom,geni-spi"; - reg = <0 0xc80000 0 0x4000>; + reg = <0 0x00c80000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; @@ -1558,7 +1607,7 @@ spi18: spi@c84000 { compatible = "qcom,geni-spi"; - reg = <0 0xc84000 0 0x4000>; + reg = <0 0x00c84000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; @@ -1592,7 +1641,7 @@ spi19: spi@c88000 { compatible = "qcom,geni-spi"; - reg = <0 0xc88000 0 0x4000>; + reg = <0 0x00c88000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; @@ -1626,7 +1675,7 @@ spi13: spi@c8c000 { compatible = "qcom,geni-spi"; - reg = <0 0xc8c000 0 0x4000>; + reg = <0 0x00c8c000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; @@ -1660,7 +1709,7 @@ spi14: spi@c90000 { compatible = "qcom,geni-spi"; - reg = <0 0xc90000 0 0x4000>; + reg = <0 0x00c90000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; @@ -1694,7 +1743,7 @@ spi15: spi@c94000 { compatible = "qcom,geni-spi"; - reg = <0 0xc94000 0 0x4000>; + reg = <0 0x00c94000 0 0x4000>; reg-names = "se"; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; @@ -1762,11 +1811,20 @@ system-cache-controller@9200000 { compatible = "qcom,sm8150-llcc"; - reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>, + <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>, + <0 0x09600000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + dma@10a2000 { + compatible = "qcom,sm8150-dcc", "qcom,dcc"; + reg = <0x0 0x010a2000 0x0 0x1000>, + <0x0 0x010ad000 0x0 0x3000>; + }; + pcie0: pci@1c00000 { compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; reg = <0 0x01c00000 0 0x3000>, @@ -1783,8 +1841,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1810,7 +1868,6 @@ "slave_q2a", "tbu"; - iommus = <&apps_smmu 0x1d80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, <0x100 &apps_smmu 0x1d81 0x1>; @@ -1851,10 +1908,10 @@ status = "disabled"; pcie0_lane: phy@1c06200 { - reg = <0 0x1c06200 0 0x170>, /* tx */ - <0 0x1c06400 0 0x200>, /* rx */ - <0 0x1c06800 0 0x1f0>, /* pcs */ - <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + reg = <0 0x01c06200 0 0x170>, /* tx */ + <0 0x01c06400 0 0x200>, /* rx */ + <0 0x01c06800 0 0x1f0>, /* pcs */ + <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; @@ -1879,7 +1936,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; @@ -1909,7 +1966,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1e00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, <0x100 &apps_smmu 0x1e01 0x1>; @@ -1950,12 +2006,12 @@ status = "disabled"; pcie1_lane: phy@1c0e200 { - reg = <0 0x1c0e200 0 0x170>, /* tx0 */ - <0 0x1c0e400 0 0x200>, /* rx0 */ - <0 0x1c0ea00 0 0x1f0>, /* pcs */ - <0 0x1c0e600 0 0x170>, /* tx1 */ - <0 0x1c0e800 0 0x200>, /* rx1 */ - <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + reg = <0 0x01c0e200 0 0x170>, /* tx0 */ + <0 0x01c0e400 0 0x200>, /* rx0 */ + <0 0x01c0ea00 0 0x1f0>, /* pcs */ + <0 0x01c0e600 0 0x170>, /* tx1 */ + <0 0x01c0e800 0 0x200>, /* rx1 */ + <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "pipe0"; @@ -2032,22 +2088,15 @@ status = "disabled"; ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; + reg = <0 0x01d87400 0 0x16c>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x16c>, + <0 0x01d87a00 0 0x200>; #phy-cells = <0>; }; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sm8150-ipa-virt"; - reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x20000>; @@ -2074,8 +2123,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 3>, - <&rpmhpd 2>; + power-domains = <&rpmhpd SM8150_LCX>, + <&rpmhpd SM8150_LMX>; power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>; @@ -2124,15 +2173,7 @@ }; gpu: gpu@2c00000 { - /* - * note: the amd,imageon compatible makes it possible - * to use the drm/msm driver without the display node, - * make sure to remove it when display node is added - */ - compatible = "qcom,adreno-640.1", - "qcom,adreno", - "amd,imageon"; - + compatible = "qcom,adreno-640.1", "qcom,adreno"; reg = <0 0x02c00000 0 0x40000>; reg-names = "kgsl_3d0_reg_memory"; @@ -2144,44 +2185,52 @@ qcom,gmu = <&gmu>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + status = "disabled"; zap-shader { memory-region = <&gpu_mem>; }; - /* note: downstream checks gpu binning for 675 Mhz */ gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-675000000 { opp-hz = /bits/ 64 <675000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-supported-hw = <0x2>; }; opp-585000000 { opp-hz = /bits/ 64 <585000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-supported-hw = <0x3>; }; opp-499200000 { opp-hz = /bits/ 64 <499200000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-supported-hw = <0x3>; }; opp-427000000 { opp-hz = /bits/ 64 <427000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-supported-hw = <0x3>; }; opp-345000000 { opp-hz = /bits/ 64 <345000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-supported-hw = <0x3>; }; opp-257000000 { opp-hz = /bits/ 64 <257000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-supported-hw = <0x3>; }; }; }; @@ -2240,7 +2289,8 @@ }; adreno_smmu: iommu@2ca0000 { - compatible = "qcom,sm8150-smmu-500", "arm,mmu-500"; + compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x02ca0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <1>; @@ -2276,422 +2326,309 @@ #interrupt-cells = <2>; wakeup-parent = <&pdc>; - qup_i2c0_default: qup-i2c0-default { - mux { - pins = "gpio0", "gpio1"; - function = "qup0"; - }; - - config { - pins = "gpio0", "gpio1"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <0x02>; + bias-disable; }; - qup_spi0_default: qup-spi0-default { + qup_spi0_default: qup-spi0-default-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "qup0"; drive-strength = <6>; bias-disable; }; - qup_i2c1_default: qup-i2c1-default { - mux { - pins = "gpio114", "gpio115"; - function = "qup1"; - }; - - config { - pins = "gpio114", "gpio115"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio114", "gpio115"; + function = "qup1"; + drive-strength = <2>; + bias-disable; }; - qup_spi1_default: qup-spi1-default { + qup_spi1_default: qup-spi1-default-state { pins = "gpio114", "gpio115", "gpio116", "gpio117"; function = "qup1"; drive-strength = <6>; bias-disable; }; - qup_i2c2_default: qup-i2c2-default { - mux { - pins = "gpio126", "gpio127"; - function = "qup2"; - }; - - config { - pins = "gpio126", "gpio127"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio126", "gpio127"; + function = "qup2"; + drive-strength = <2>; + bias-disable; }; - qup_spi2_default: qup-spi2-default { + qup_spi2_default: qup-spi2-default-state { pins = "gpio126", "gpio127", "gpio128", "gpio129"; function = "qup2"; drive-strength = <6>; bias-disable; }; - qup_i2c3_default: qup-i2c3-default { - mux { - pins = "gpio144", "gpio145"; - function = "qup3"; - }; - - config { - pins = "gpio144", "gpio145"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio144", "gpio145"; + function = "qup3"; + drive-strength = <2>; + bias-disable; }; - qup_spi3_default: qup-spi3-default { + qup_spi3_default: qup-spi3-default-state { pins = "gpio144", "gpio145", "gpio146", "gpio147"; function = "qup3"; drive-strength = <6>; bias-disable; }; - qup_i2c4_default: qup-i2c4-default { - mux { - pins = "gpio51", "gpio52"; - function = "qup4"; - }; - - config { - pins = "gpio51", "gpio52"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio51", "gpio52"; + function = "qup4"; + drive-strength = <2>; + bias-disable; }; - qup_spi4_default: qup-spi4-default { + qup_spi4_default: qup-spi4-default-state { pins = "gpio51", "gpio52", "gpio53", "gpio54"; function = "qup4"; drive-strength = <6>; bias-disable; }; - qup_i2c5_default: qup-i2c5-default { - mux { - pins = "gpio121", "gpio122"; - function = "qup5"; - }; - - config { - pins = "gpio121", "gpio122"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio121", "gpio122"; + function = "qup5"; + drive-strength = <2>; + bias-disable; }; - qup_spi5_default: qup-spi5-default { + qup_spi5_default: qup-spi5-default-state { pins = "gpio119", "gpio120", "gpio121", "gpio122"; function = "qup5"; drive-strength = <6>; bias-disable; }; - qup_i2c6_default: qup-i2c6-default { - mux { - pins = "gpio6", "gpio7"; - function = "qup6"; - }; - - config { - pins = "gpio6", "gpio7"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio6", "gpio7"; + function = "qup6"; + drive-strength = <2>; + bias-disable; }; - qup_spi6_default: qup-spi6_default { + qup_spi6_default: qup-spi6_default-state { pins = "gpio4", "gpio5", "gpio6", "gpio7"; function = "qup6"; drive-strength = <6>; bias-disable; }; - qup_i2c7_default: qup-i2c7-default { - mux { - pins = "gpio98", "gpio99"; - function = "qup7"; - }; - - config { - pins = "gpio98", "gpio99"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio98", "gpio99"; + function = "qup7"; + drive-strength = <2>; + bias-disable; }; - qup_spi7_default: qup-spi7_default { + qup_spi7_default: qup-spi7_default-state { pins = "gpio98", "gpio99", "gpio100", "gpio101"; function = "qup7"; drive-strength = <6>; bias-disable; }; - qup_i2c8_default: qup-i2c8-default { - mux { - pins = "gpio88", "gpio89"; - function = "qup8"; - }; - - config { - pins = "gpio88", "gpio89"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio88", "gpio89"; + function = "qup8"; + drive-strength = <2>; + bias-disable; }; - qup_spi8_default: qup-spi8-default { + qup_spi8_default: qup-spi8-default-state { pins = "gpio88", "gpio89", "gpio90", "gpio91"; function = "qup8"; drive-strength = <6>; bias-disable; }; - qup_i2c9_default: qup-i2c9-default { - mux { - pins = "gpio39", "gpio40"; - function = "qup9"; - }; - - config { - pins = "gpio39", "gpio40"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio39", "gpio40"; + function = "qup9"; + drive-strength = <2>; + bias-disable; }; - qup_spi9_default: qup-spi9-default { + qup_spi9_default: qup-spi9-default-state { pins = "gpio39", "gpio40", "gpio41", "gpio42"; function = "qup9"; drive-strength = <6>; bias-disable; }; - qup_i2c10_default: qup-i2c10-default { - mux { - pins = "gpio9", "gpio10"; - function = "qup10"; - }; + qup_uart9_default: qup-uart9-default-state { + pins = "gpio41", "gpio42"; + function = "qup9"; + drive-strength = <2>; + bias-disable; + }; - config { - pins = "gpio9", "gpio10"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio9", "gpio10"; + function = "qup10"; + drive-strength = <2>; + bias-disable; }; - qup_spi10_default: qup-spi10-default { + qup_spi10_default: qup-spi10-default-state { pins = "gpio9", "gpio10", "gpio11", "gpio12"; function = "qup10"; drive-strength = <6>; bias-disable; }; - qup_i2c11_default: qup-i2c11-default { - mux { - pins = "gpio94", "gpio95"; - function = "qup11"; - }; - - config { - pins = "gpio94", "gpio95"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio94", "gpio95"; + function = "qup11"; + drive-strength = <2>; + bias-disable; }; - qup_spi11_default: qup-spi11-default { + qup_spi11_default: qup-spi11-default-state { pins = "gpio92", "gpio93", "gpio94", "gpio95"; function = "qup11"; drive-strength = <6>; bias-disable; }; - qup_i2c12_default: qup-i2c12-default { - mux { - pins = "gpio83", "gpio84"; - function = "qup12"; - }; - - config { - pins = "gpio83", "gpio84"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c12_default: qup-i2c12-default-state { + pins = "gpio83", "gpio84"; + function = "qup12"; + drive-strength = <2>; + bias-disable; }; - qup_spi12_default: qup-spi12-default { + qup_spi12_default: qup-spi12-default-state { pins = "gpio83", "gpio84", "gpio85", "gpio86"; function = "qup12"; drive-strength = <6>; bias-disable; }; - qup_i2c13_default: qup-i2c13-default { - mux { - pins = "gpio43", "gpio44"; - function = "qup13"; - }; - - config { - pins = "gpio43", "gpio44"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c13_default: qup-i2c13-default-state { + pins = "gpio43", "gpio44"; + function = "qup13"; + drive-strength = <2>; + bias-disable; }; - qup_spi13_default: qup-spi13-default { + qup_spi13_default: qup-spi13-default-state { pins = "gpio43", "gpio44", "gpio45", "gpio46"; function = "qup13"; drive-strength = <6>; bias-disable; }; - qup_i2c14_default: qup-i2c14-default { - mux { - pins = "gpio47", "gpio48"; - function = "qup14"; - }; - - config { - pins = "gpio47", "gpio48"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c14_default: qup-i2c14-default-state { + pins = "gpio47", "gpio48"; + function = "qup14"; + drive-strength = <2>; + bias-disable; }; - qup_spi14_default: qup-spi14-default { + qup_spi14_default: qup-spi14-default-state { pins = "gpio47", "gpio48", "gpio49", "gpio50"; function = "qup14"; drive-strength = <6>; bias-disable; }; - qup_i2c15_default: qup-i2c15-default { - mux { - pins = "gpio27", "gpio28"; - function = "qup15"; - }; - - config { - pins = "gpio27", "gpio28"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c15_default: qup-i2c15-default-state { + pins = "gpio27", "gpio28"; + function = "qup15"; + drive-strength = <2>; + bias-disable; }; - qup_spi15_default: qup-spi15-default { + qup_spi15_default: qup-spi15-default-state { pins = "gpio27", "gpio28", "gpio29", "gpio30"; function = "qup15"; drive-strength = <6>; bias-disable; }; - qup_i2c16_default: qup-i2c16-default { - mux { - pins = "gpio86", "gpio85"; - function = "qup16"; - }; - - config { - pins = "gpio86", "gpio85"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c16_default: qup-i2c16-default-state { + pins = "gpio86", "gpio85"; + function = "qup16"; + drive-strength = <2>; + bias-disable; }; - qup_spi16_default: qup-spi16-default { + qup_spi16_default: qup-spi16-default-state { pins = "gpio83", "gpio84", "gpio85", "gpio86"; function = "qup16"; drive-strength = <6>; bias-disable; }; - qup_i2c17_default: qup-i2c17-default { - mux { - pins = "gpio55", "gpio56"; - function = "qup17"; - }; - - config { - pins = "gpio55", "gpio56"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c17_default: qup-i2c17-default-state { + pins = "gpio55", "gpio56"; + function = "qup17"; + drive-strength = <2>; + bias-disable; }; - qup_spi17_default: qup-spi17-default { + qup_spi17_default: qup-spi17-default-state { pins = "gpio55", "gpio56", "gpio57", "gpio58"; function = "qup17"; drive-strength = <6>; bias-disable; }; - qup_i2c18_default: qup-i2c18-default { - mux { - pins = "gpio23", "gpio24"; - function = "qup18"; - }; - - config { - pins = "gpio23", "gpio24"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c18_default: qup-i2c18-default-state { + pins = "gpio23", "gpio24"; + function = "qup18"; + drive-strength = <2>; + bias-disable; }; - qup_spi18_default: qup-spi18-default { + qup_spi18_default: qup-spi18-default-state { pins = "gpio23", "gpio24", "gpio25", "gpio26"; function = "qup18"; drive-strength = <6>; bias-disable; }; - qup_i2c19_default: qup-i2c19-default { - mux { - pins = "gpio57", "gpio58"; - function = "qup19"; - }; - - config { - pins = "gpio57", "gpio58"; - drive-strength = <0x02>; - bias-disable; - }; + qup_i2c19_default: qup-i2c19-default-state { + pins = "gpio57", "gpio58"; + function = "qup19"; + drive-strength = <2>; + bias-disable; }; - qup_spi19_default: qup-spi19-default { + qup_spi19_default: qup-spi19-default-state { pins = "gpio55", "gpio56", "gpio57", "gpio58"; function = "qup19"; drive-strength = <6>; bias-disable; }; - pcie0_default_state: pcie0-default { - perst { + pcie0_default_state: pcie0-default-state { + perst-pins { pins = "gpio35"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio36"; function = "pci_e0"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio37"; function = "gpio"; drive-strength = <2>; @@ -2699,22 +2636,22 @@ }; }; - pcie1_default_state: pcie1-default { - perst { + pcie1_default_state: pcie1-default-state { + perst-pins { pins = "gpio102"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio103"; function = "pci_e1"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio104"; function = "gpio"; drive-strength = <2>; @@ -2739,8 +2676,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 7>, - <&rpmhpd 0>; + power-domains = <&rpmhpd SM8150_CX>, + <&rpmhpd SM8150_MSS>; power-domain-names = "cx", "mss"; memory-region = <&mpss_mem>; @@ -3366,7 +3303,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 7>; + power-domains = <&rpmhpd SM8150_CX>; memory-region = <&cdsp_mem>; @@ -3699,6 +3636,291 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8150-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x420>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8150-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + phys = <&mdss_dsi0_phy>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + phys = <&mdss_dsi1_phy>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8150-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <0>, + <0>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + power-domains = <&rpmhpd SM8150_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8150-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x400>; @@ -3709,7 +3931,7 @@ interrupt-controller; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; @@ -3761,7 +3983,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; apps_smmu: iommu@15000000 { @@ -3867,7 +4088,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 7>; + power-domains = <&rpmhpd SM8150_CX>; memory-region = <&adsp_mem>; @@ -3923,7 +4144,8 @@ }; apss_shared: mailbox@17c00000 { - compatible = "qcom,sm8150-apss-shared"; + compatible = "qcom,sm8150-apss-shared", + "qcom,sdm845-apss-shared"; reg = <0x0 0x17c00000 0x0 0x1000>; #mbox-cells = <1>; }; @@ -3943,7 +4165,7 @@ reg = <0x0 0x17c20000 0x0 0x1000>; clock-frequency = <19200000>; - frame@17c21000{ + frame@17c21000 { frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; @@ -4010,6 +4232,7 @@ <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; rpmhcc: clock-controller { compatible = "qcom,sm8150-rpmh-clk"; @@ -4078,7 +4301,7 @@ }; osm_l3: interconnect@18321000 { - compatible = "qcom,sm8150-osm-l3"; + compatible = "qcom,sm8150-osm-l3", "qcom,osm-l3"; reg = <0 0x18321000 0 0x1400>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; @@ -4088,7 +4311,7 @@ }; cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sm8150-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>, <0 0x18327800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1", @@ -4098,6 +4321,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; lmh_cluster1: lmh@18350800 { @@ -4176,7 +4400,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4220,7 +4444,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4264,7 +4488,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4308,7 +4532,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4352,7 +4576,7 @@ type = "passive"; }; - cpu4_top_crit: cpu_crit { + cpu4_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4396,7 +4620,7 @@ type = "passive"; }; - cpu5_top_crit: cpu_crit { + cpu5_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4440,7 +4664,7 @@ type = "passive"; }; - cpu6_top_crit: cpu_crit { + cpu6_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4484,7 +4708,7 @@ type = "passive"; }; - cpu7_top_crit: cpu_crit { + cpu7_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4528,7 +4752,7 @@ type = "passive"; }; - cpu4_bottom_crit: cpu_crit { + cpu4_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4572,7 +4796,7 @@ type = "passive"; }; - cpu5_bottom_crit: cpu_crit { + cpu5_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4616,7 +4840,7 @@ type = "passive"; }; - cpu6_bottom_crit: cpu_crit { + cpu6_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -4660,7 +4884,7 @@ type = "passive"; }; - cpu7_bottom_crit: cpu_crit { + cpu7_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts index 632e98193d27..0aee7f8658b4 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts @@ -65,7 +65,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -199,7 +199,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -310,7 +310,7 @@ }; }; - pm8009-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index a102aa5efa32..4c9de236676d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -23,6 +23,29 @@ serial0 = &uart12; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9380-codec"; + + reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-rxtx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -164,7 +187,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -298,7 +321,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -409,7 +432,7 @@ }; }; - pm8009-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; @@ -631,27 +654,6 @@ firmware-name = "qcom/sm8250/slpi.mbn"; }; -&soc { - wcd938x: codec { - compatible = "qcom,wcd9380-codec"; - #sound-dai-cells = <1>; - reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-rxtx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; - vdd-mic-bias-supply = <&vreg_bob>; - qcom,micbias1-microvolt = <1800000>; - qcom,micbias2-microvolt = <1800000>; - qcom,micbias3-microvolt = <1800000>; - qcom,micbias4-microvolt = <1800000>; - qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; - qcom,mbhc-headset-vthreshold-microvolt = <1700000>; - qcom,mbhc-headphone-vthreshold-microvolt = <50000>; - qcom,rx-device = <&wcd_rx>; - qcom,tx-device = <&wcd_tx>; - }; -}; - &sound { compatible = "qcom,sm8250-sndcard"; model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC"; @@ -757,19 +759,21 @@ }; &swr0 { - left_spkr: wsa8810-right@0,3{ + status = "okay"; + + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; - powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; }; - right_spkr: wsa8810-left@0,4{ + right_spkr: speaker@0,4 { compatible = "sdw10217211000"; reg = <0 4>; - powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight"; #sound-dai-cells = <0>; @@ -799,31 +803,19 @@ &tlmm { gpio-reserved-ranges = <28 4>, <40 4>; - wcd938x_reset_default: wcd938x_reset_default { - mux { - pins = "gpio32"; - function = "gpio"; - }; - - config { - pins = "gpio32"; - drive-strength = <16>; - output-high; - }; + wcd938x_reset_default: wcd938x-reset-default-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <16>; + output-high; }; - wcd938x_reset_sleep: wcd938x_reset_sleep { - mux { - pins = "gpio32"; - function = "gpio"; - }; - - config { - pins = "gpio32"; - drive-strength = <16>; - bias-disable; - output-low; - }; + wcd938x_reset_sleep: wcd938x-reset-sleep-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; }; }; @@ -902,3 +894,7 @@ &venus { status = "okay"; }; + +&wsamacro { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts index 5ecf7dafb2ec..01fe3974ee72 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -26,7 +26,7 @@ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 549e0a2aa9fe..2f22d348d45d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -63,7 +63,7 @@ gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; @@ -123,7 +123,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -247,7 +247,7 @@ * ab: 4600000-6100000 * ibb: 800000-5400000 */ - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -317,6 +317,8 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_2p85: ldo7 { @@ -339,6 +341,8 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p3: ldo10 { @@ -356,7 +360,7 @@ }; }; - pm8009-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; @@ -434,14 +438,23 @@ status = "okay"; clock-frequency = <400000>; - /* NXP PN553 NFC @ 28 */ + nfc@28 { + compatible = "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <111 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + }; }; &i2c2 { status = "okay"; clock-frequency = <1000000>; - cs35l41_l: cs35l41@40 { + cs35l41_l: speaker-amp@40 { compatible = "cirrus,cs35l41"; reg = <0x40>; interrupt-parent = <&tlmm>; @@ -456,7 +469,7 @@ #sound-dai-cells = <1>; }; - cs35l41_r: cs35l41@41 { + cs35l41_r: speaker-amp@41 { compatible = "cirrus,cs35l41"; reg = <0x41>; interrupt-parent = <&tlmm>; @@ -509,10 +522,8 @@ clock-frequency = <400000>; /* Qcom SMB1390 @ 10 */ - /* Silicon Labs SI4704 FM Radio Receiver @ 11 */ /* Qcom SMB1390_slave @ 18 */ /* HALO HL6111R Qi charger @ 25 */ - /* Richwave RTC6226 FM Radio Receiver @ 64 */ }; &pcie0 { @@ -572,7 +583,7 @@ vqmmc-supply = <&vreg_l6c_2p9>; bus-width = <4>; no-sdio; - no-emmc; + no-mmc; }; &slpi { @@ -582,49 +593,48 @@ &tlmm { gpio-reserved-ranges = <40 4>, <52 4>; - sdc2_default_state: sdc2-default { - clk { + sdc2_default_state: sdc2-default-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <16>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <16>; bias-pull-up; }; }; - mdm2ap_default: mdm2ap-default { + mdm2ap_default: mdm2ap-default-state { pins = "gpio1", "gpio3"; function = "gpio"; drive-strength = <8>; bias-disable; }; - ts_int_default: ts-int-default { + ts_int_default: ts-int-default-state { pins = "gpio39"; function = "gpio"; drive-strength = <2>; - bias-disabled; - input-enable; + bias-disable; }; - ap2mdm_default: ap2mdm-default { + ap2mdm_default: ap2mdm-default-state { pins = "gpio56", "gpio57"; function = "gpio"; drive-strength = <16>; bias-disable; }; - sdc2_card_det_n: sd-card-det-n { + sdc2_card_det_n: sd-card-det-n-state { pins = "gpio77"; function = "gpio"; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts new file mode 100644 index 000000000000..de6101ddebe7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com> + */ + +/dts-v1/; + +#include "sm8250-xiaomi-elish-common.dtsi" + +/ { + model = "Xiaomi Mi Pad 5 Pro (BOE)"; + compatible = "xiaomi,elish", "qcom,sm8250"; +}; + +&display_panel { + compatible = "xiaomi,elish-boe-nt36523", "novatek,nt36523"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi new file mode 100644 index 000000000000..8af6a0120a50 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -0,0 +1,701 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com> + */ + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" + +/* + * Delete following upstream (sm8250.dtsi) reserved + * memory mappings which are different on this device. + */ +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_secure_heap; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &xbl_aop_mem; + +/ { + classis-type = "tablet"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */ + qcom,board-id = <0x10008 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9c000000 0x0 0x2300000>; + width = <1600>; + height = <2560>; + stride = <(1600 * 4)>; + format = "a8r8g8b8"; + }; + }; + + battery_l: battery-l { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3870000>; + energy-full-design-microwatt-hours = <16600000>; + charge-full-design-microamp-hours = <4300000>; + }; + + battery_r: battery-r { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3870000>; + energy-full-design-microwatt-hours = <16600000>; + charge-full-design-microamp-hours = <4300000>; + }; + + bl_vddpos_5p5: bl-vddpos-regulator { + compatible = "regulator-fixed"; + regulator-name = "bl_vddpos_5p5"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + bl_vddneg_5p5: bl-vddneg-regulator { + compatible = "regulator-fixed"; + regulator-name = "bl_vddneg_5p5"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_n>; + + key-vol-up { + label = "Volume Up"; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + xbl_aop_mem: xbl-aop@80700000 { + reg = <0x0 0x80600000 0x0 0x260000>; + no-map; + }; + + slpi_mem: slpi@88c00000 { + reg = <0x0 0x88c00000 0x0 0x2f00000>; + no-map; + }; + + adsp_mem: adsp@8bb00000 { + reg = <0x0 0x8bb00000 0x0 0x2500000>; + no-map; + }; + + spss_mem: spss@8e000000 { + reg = <0x0 0x8e000000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: cdsp-secure-heap@8e100000 { + reg = <0x0 0x8e100000 0x0 0x4600000>; + no-map; + }; + + cont_splash_mem: cont-splash@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2300000>; + no-map; + }; + + ramoops@b0000000 { + compatible = "ramoops"; + reg = <0x0 0xb0000000 0x0 0x400000>; + record-size = <0x1000>; + console-size = <0x200000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&adsp { + firmware-name = "qcom/sm8250/xiaomi/elish/adsp.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; + vdd-l6-l9-supply = <&vreg_s8c_1p35>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + /* (S1+S2+S3) - cx.lvl (ARC) */ + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p95: smps6 { + regulator-name = "vreg_s6a_0p95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L4 - lmx.lvl (ARC) */ + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + /* L7 is unused. */ + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L10 is unused, L11 - lcx.lvl (ARC) */ + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L13 is unused. */ + + vreg_l14a_1p88: ldo14 { + regulator-name = "vreg_l14a_1p88"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L15 & L16 are unused. */ + + vreg_l17a_3p0: ldo17 { + regulator-name = "vreg_l17a_3p0"; + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* + * Remaining regulators that are not yet supported: + * OLEDB: 4925000-8100000 + * ab: 4600000-6100000 + * ibb: 800000-5400000 + */ + regulators-1 { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p35>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3350000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + /* + * S1-S6 are ARCs: + * (S1+S2) - gfx.lvl, + * S3 - mx.lvl, + * (S4+S5) - mmcx.lvl, + * S6 - ebi.lvl + */ + + vreg_s7c_0p35: smps7 { + regulator-name = "vreg_s7c_0p35"; + regulator-min-microvolt = <348000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8c_1p35: smps8 { + regulator-name = "vreg_s8c_1p35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L2-4 are unused. */ + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-name = "vreg_l6c_2p9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_2p85: ldo7 { + regulator-name = "vreg_l7c_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-name = "vreg_l9c_2p9"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-name = "vreg_l10c_3p3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3296000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p0: ldo11 { + regulator-name = "vreg_l11c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p35>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_s1f_1p2: smps1 { + regulator-name = "vreg_s1f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2f_0p5: smps2 { + regulator-name = "vreg_s2f_0p5"; + regulator-min-microvolt = <512000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L1 is unused. */ + + vreg_l2f_1p3: ldo2 { + regulator-name = "vreg_l2f_1p3"; + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L3 & L4 are unused. */ + + vreg_l5f_2p8: ldo5 { + regulator-name = "vreg_l5f_2p85"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p8: ldo6 { + regulator-name = "vreg_l6f_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&cdsp { + firmware-name = "qcom/sm8250/xiaomi/elish/cdsp.mbn"; + status = "okay"; +}; + +&dsi0 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + qcom,master-dsi; + status = "okay"; + + display_panel: panel@0 { + reg = <0>; + vddio-supply = <&vreg_l14a_1p88>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1{ + reg = <1>; + + panel_in_1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_0>; +}; + +&dsi0_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + +&dsi1 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + status = "okay"; +}; + +&dsi1_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_1>; +}; + +&dsi1_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27z561"; + reg = <0x55>; + monitored-battery = <&battery_r>; + }; +}; + +&i2c11 { + clock-frequency = <400000>; + status = "okay"; + + backlight: backlight@11 { + compatible = "kinetic,ktz8866"; + reg = <0x11>; + vddpos-supply = <&bl_vddpos_5p5>; + vddneg-supply = <&bl_vddneg_5p5>; + enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>; + current-num-sinks = <5>; + kinetic,current-ramp-delay-ms = <128>; + kinetic,led-enable-ramp-delay-ms = <1>; + kinetic,enable-lcd-bias; + }; +}; + +&i2c13 { + clock-frequency = <400000>; + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27z561"; + reg = <0x55>; + monitored-battery = <&battery_l>; + }; +}; + +&mdss { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + status = "okay"; +}; + +&pm8150_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + input-enable; + bias-pull-up; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&slpi { + firmware-name = "qcom/sm8250/xiaomi/elish/slpi.mbn"; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <40 4>; +}; + +&usb_1 { + /* USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + /* Remove USB3 phy */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; + status = "okay"; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l17a_3p0>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6a_1p2>; + vccq-max-microamp = <800000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <800000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sm8250/xiaomi/elish/venus.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts new file mode 100644 index 000000000000..4cffe9c703df --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com> + */ + +/dts-v1/; + +#include "sm8250-xiaomi-elish-common.dtsi" + +/ { + model = "Xiaomi Mi Pad 5 Pro (CSOT)"; + compatible = "xiaomi,elish", "qcom,sm8250"; +}; + +&display_panel { + compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index a5b62cadb129..7bea916900e2 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -97,6 +97,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -110,9 +111,15 @@ #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; + cache-level = <3>; + cache-size = <0x400000>; + cache-unified; }; }; }; @@ -121,6 +128,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -134,6 +142,9 @@ #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -142,6 +153,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -155,6 +167,9 @@ #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -163,6 +178,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -176,6 +192,9 @@ #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -184,6 +203,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; @@ -197,6 +217,9 @@ #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -205,6 +228,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; @@ -218,15 +242,18 @@ #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; + cache-unified; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; @@ -240,6 +267,9 @@ #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -248,6 +278,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <444>; @@ -261,6 +292,9 @@ #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-unified; next-level-cache = <&L3_0>; }; }; @@ -328,12 +362,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-llcc-off"; arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3264>; exit-latency-us = <6562>; min-residency-us = <9987>; - local-timer-stop; }; }; }; @@ -650,55 +682,55 @@ compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD1: cpu1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD2: cpu2 { + CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD3: cpu3 { + CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD4: cpu4 { + CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD5: cpu5 { + CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD6: cpu6 { + CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD7: cpu7 { + CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CLUSTER_PD: cpu-cluster0 { + CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_SLEEP_0>; }; @@ -928,6 +960,18 @@ #mbox-cells = <2>; }; + qfprom: efuse@784000 { + compatible = "qcom,sm8250-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@19b { + reg = <0x19b 0x1>; + bits = <5 3>; + }; + }; + rng: rng@793000 { compatible = "qcom,prng-ee"; reg = <0 0x00793000 0 0x1000>; @@ -936,7 +980,7 @@ }; gpi_dma2: dma-controller@800000 { - compatible = "qcom,sm8250-gpi-dma"; + compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0 0x00800000 0 0x70000>; interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, @@ -1187,7 +1231,7 @@ }; gpi_dma0: dma-controller@900000 { - compatible = "qcom,sm8250-gpi-dma"; + compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0 0x00900000 0 0x70000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, @@ -1505,7 +1549,7 @@ }; gpi_dma1: dma-controller@a00000 { - compatible = "qcom,sm8250-gpi-dma"; + compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0 0x00a00000 0 0x70000>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, @@ -1797,8 +1841,9 @@ <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, <0 0x60001000 0 0x1000>, - <0 0x60100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0 0x60100000 0 0x100000>, + <0 0x01c03000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; device_type = "pci"; linux,pci-domain = <0>; bus-range = <0x00 0xff>; @@ -1807,8 +1852,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -1844,7 +1889,6 @@ "tbu", "ddrss_sf_tbu"; - iommus = <&apps_smmu 0x1c00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; @@ -1886,10 +1930,10 @@ status = "disabled"; pcie0_lane: phy@1c06200 { - reg = <0 0x1c06200 0 0x170>, /* tx */ - <0 0x1c06400 0 0x200>, /* rx */ - <0 0x1c06800 0 0x1f0>, /* pcs */ - <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + reg = <0 0x01c06200 0 0x170>, /* tx */ + <0 0x01c06400 0 0x200>, /* rx */ + <0 0x01c06800 0 0x1f0>, /* pcs */ + <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; @@ -1906,8 +1950,9 @@ <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, <0 0x40001000 0 0x1000>, - <0 0x40100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0 0x40100000 0 0x100000>, + <0 0x01c0b000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; device_type = "pci"; linux,pci-domain = <1>; bus-range = <0x00 0xff>; @@ -1916,7 +1961,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; @@ -1950,7 +1995,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -1992,12 +2036,12 @@ status = "disabled"; pcie1_lane: phy@1c0e200 { - reg = <0 0x1c0e200 0 0x170>, /* tx0 */ - <0 0x1c0e400 0 0x200>, /* rx0 */ - <0 0x1c0ea00 0 0x1f0>, /* pcs */ - <0 0x1c0e600 0 0x170>, /* tx1 */ - <0 0x1c0e800 0 0x200>, /* rx1 */ - <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + reg = <0 0x01c0e200 0 0x170>, /* tx0 */ + <0 0x01c0e400 0 0x200>, /* rx0 */ + <0 0x01c0ea00 0 0x1f0>, /* pcs */ + <0 0x01c0e600 0 0x170>, /* tx1 */ + <0 0x01c0e800 0 0x200>, /* rx1 */ + <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "pipe0"; @@ -2014,8 +2058,9 @@ <0 0x64000000 0 0xf1d>, <0 0x64000f20 0 0xa8>, <0 0x64001000 0 0x1000>, - <0 0x64100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0 0x64100000 0 0x100000>, + <0 0x01c13000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; device_type = "pci"; linux,pci-domain = <2>; bus-range = <0x00 0xff>; @@ -2024,7 +2069,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>, <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>; interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; @@ -2058,7 +2103,6 @@ assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1d00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, <0x100 &apps_smmu 0x1d01 0x1>; @@ -2081,7 +2125,7 @@ pcie2_phy: phy@1c16000 { compatible = "qcom,sm8250-qmp-modem-pcie-phy"; - reg = <0 0x1c16000 0 0x1c0>; + reg = <0 0x01c16000 0 0x1c0>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -2100,12 +2144,12 @@ status = "disabled"; pcie2_lane: phy@1c16200 { - reg = <0 0x1c16200 0 0x170>, /* tx0 */ - <0 0x1c16400 0 0x200>, /* rx0 */ - <0 0x1c16a00 0 0x1f0>, /* pcs */ - <0 0x1c16600 0 0x170>, /* tx1 */ - <0 0x1c16800 0 0x200>, /* rx1 */ - <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + reg = <0 0x01c16200 0 0x170>, /* tx0 */ + <0 0x01c16400 0 0x200>, /* rx0 */ + <0 0x01c16a00 0 0x1f0>, /* pcs */ + <0 0x01c16600 0 0x170>, /* tx1 */ + <0 0x01c16800 0 0x200>, /* rx1 */ + <0 0x01c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; clock-names = "pipe0"; @@ -2179,22 +2223,15 @@ status = "disabled"; ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; + reg = <0 0x01d87400 0 0x16c>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x16c>, + <0 0x01d87a00 0 0x200>; #phy-cells = <0>; }; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sm8250-ipa-virt"; - reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -2214,12 +2251,13 @@ clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; #clock-cells = <0>; - clock-frequency = <9600000>; clock-output-names = "mclk"; #sound-dai-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&wsa_swr_active>; + + status = "disabled"; }; swr0: soundwire-controller@3250000 { @@ -2240,6 +2278,8 @@ #sound-dai-cells = <1>; #address-cells = <2>; #size-cells = <0>; + + status = "disabled"; }; audiocc: clock-controller@3300000 { @@ -2262,7 +2302,6 @@ clock-names = "mclk", "macro", "dcodec"; #clock-cells = <0>; - clock-frequency = <9600000>; clock-output-names = "fsgen"; #sound-dai-cells = <1>; }; @@ -2271,7 +2310,7 @@ pinctrl-names = "default"; pinctrl-0 = <&rx_swr_active>; compatible = "qcom,sm8250-lpass-rx-macro"; - reg = <0 0x3200000 0 0x1000>; + reg = <0 0x03200000 0 0x1000>; status = "disabled"; clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, @@ -2283,13 +2322,12 @@ clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; #clock-cells = <0>; - clock-frequency = <9600000>; clock-output-names = "mclk"; #sound-dai-cells = <1>; }; swr1: soundwire-controller@3210000 { - reg = <0 0x3210000 0 0x2000>; + reg = <0 0x03210000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; status = "disabled"; interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; @@ -2299,15 +2337,15 @@ qcom,din-ports = <0>; qcom,dout-ports = <5>; - qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1F 0x1F 0x07 0x00>; - qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>; - qcom,ports-hstart = /bits/ 8 <0xFF 0x03 0xFF 0xFF 0xFF>; - qcom,ports-hstop = /bits/ 8 <0xFF 0x06 0xFF 0xFF 0xFF>; - qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xFF 0xFF>; - qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0x00 0x01 0xFF 0xFF>; + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; - qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; #sound-dai-cells = <1>; #address-cells = <2>; @@ -2318,7 +2356,7 @@ pinctrl-names = "default"; pinctrl-0 = <&tx_swr_active>; compatible = "qcom,sm8250-lpass-tx-macro"; - reg = <0 0x3220000 0 0x1000>; + reg = <0 0x03220000 0 0x1000>; status = "disabled"; clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, @@ -2330,18 +2368,15 @@ clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; #clock-cells = <0>; - clock-frequency = <9600000>; clock-output-names = "mclk"; - #address-cells = <2>; - #size-cells = <2>; #sound-dai-cells = <1>; }; /* tx macro */ swr2: soundwire-controller@3230000 { - reg = <0 0x3230000 0 0x2000>; + reg = <0 0x03230000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; - interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core"; status = "disabled"; @@ -2351,16 +2386,15 @@ qcom,din-ports = <5>; qcom,dout-ports = <0>; - qcom,ports-sinterval-low = /bits/ 8 <0xFF 0x01 0x01 0x03 0x03>; - qcom,ports-offset1 = /bits/ 8 <0xFF 0x01 0x00 0x02 0x00>; - qcom,ports-offset2 = /bits/ 8 <0xFF 0x00 0x00 0x00 0x00>; - qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; - qcom,ports-hstart = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; - qcom,ports-hstop = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; - qcom,ports-word-length = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; - qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; - qcom,ports-lane-control = /bits/ 8 <0xFF 0x00 0x01 0x00 0x01>; - qcom,port-offset = <1>; + qcom,ports-sinterval-low = /bits/ 8 <0xff 0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0xff 0x01 0x00 0x02 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0x00 0x01 0x00 0x01>; #sound-dai-cells = <1>; #address-cells = <2>; #size-cells = <0>; @@ -2376,7 +2410,7 @@ clock-names = "core", "audio", "bus"; }; - lpass_tlmm: pinctrl@33c0000{ + lpass_tlmm: pinctrl@33c0000 { compatible = "qcom,sm8250-lpass-lpi-pinctrl"; reg = <0 0x033c0000 0x0 0x20000>, <0 0x03550000 0x0 0x10000>; @@ -2388,8 +2422,8 @@ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "core", "audio"; - wsa_swr_active: wsa-swr-active-pins { - clk { + wsa_swr_active: wsa-swr-active-state { + clk-pins { pins = "gpio10"; function = "wsa_swr_clk"; drive-strength = <2>; @@ -2397,52 +2431,47 @@ bias-disable; }; - data { + data-pins { pins = "gpio11"; function = "wsa_swr_data"; drive-strength = <2>; slew-rate = <1>; bias-bus-hold; - }; }; - wsa_swr_sleep: wsa-swr-sleep-pins { - clk { + wsa_swr_sleep: wsa-swr-sleep-state { + clk-pins { pins = "gpio10"; function = "wsa_swr_clk"; drive-strength = <2>; - input-enable; bias-pull-down; }; - data { + data-pins { pins = "gpio11"; function = "wsa_swr_data"; drive-strength = <2>; - input-enable; bias-pull-down; - }; }; - dmic01_active: dmic01-active-pins { - clk { + dmic01_active: dmic01-active-state { + clk-pins { pins = "gpio6"; function = "dmic1_clk"; drive-strength = <8>; output-high; }; - data { + data-pins { pins = "gpio7"; function = "dmic1_data"; drive-strength = <8>; - input-enable; }; }; - dmic01_sleep: dmic01-sleep-pins { - clk { + dmic01_sleep: dmic01-sleep-state { + clk-pins { pins = "gpio6"; function = "dmic1_clk"; drive-strength = <2>; @@ -2450,17 +2479,16 @@ output-low; }; - data { + data-pins { pins = "gpio7"; function = "dmic1_data"; drive-strength = <2>; - pull-down; - input-enable; + bias-pull-down; }; }; - rx_swr_active: rx_swr-active-pins { - clk { + rx_swr_active: rx-swr-active-state { + clk-pins { pins = "gpio3"; function = "swr_rx_clk"; drive-strength = <2>; @@ -2468,7 +2496,7 @@ bias-disable; }; - data { + data-pins { pins = "gpio4", "gpio5"; function = "swr_rx_data"; drive-strength = <2>; @@ -2477,8 +2505,8 @@ }; }; - tx_swr_active: tx_swr-active-pins { - clk { + tx_swr_active: tx-swr-active-state { + clk-pins { pins = "gpio0"; function = "swr_tx_clk"; drive-strength = <2>; @@ -2486,7 +2514,7 @@ bias-disable; }; - data { + data-pins { pins = "gpio1", "gpio2"; function = "swr_tx_data"; drive-strength = <2>; @@ -2495,28 +2523,25 @@ }; }; - tx_swr_sleep: tx_swr-sleep-pins { - clk { + tx_swr_sleep: tx-swr-sleep-state { + clk-pins { pins = "gpio0"; function = "swr_tx_clk"; drive-strength = <2>; - input-enable; bias-pull-down; }; - data1 { + data1-pins { pins = "gpio1"; function = "swr_tx_data"; drive-strength = <2>; - input-enable; bias-bus-hold; }; - data2 { + data2-pins { pins = "gpio2"; function = "swr_tx_data"; drive-strength = <2>; - input-enable; bias-pull-down; }; }; @@ -2537,49 +2562,58 @@ qcom,gmu = <&gmu>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + status = "disabled"; zap-shader { memory-region = <&gpu_mem>; }; - /* note: downstream checks gpu binning for 670 Mhz */ gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-670000000 { opp-hz = /bits/ 64 <670000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-supported-hw = <0xa>; }; opp-587000000 { opp-hz = /bits/ 64 <587000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-supported-hw = <0xb>; }; opp-525000000 { opp-hz = /bits/ 64 <525000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-supported-hw = <0xf>; }; opp-490000000 { opp-hz = /bits/ 64 <490000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-supported-hw = <0xf>; }; opp-441600000 { opp-hz = /bits/ 64 <441600000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + opp-supported-hw = <0xf>; }; opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-supported-hw = <0xf>; }; opp-305000000 { opp-hz = /bits/ 64 <305000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-supported-hw = <0xf>; }; }; }; @@ -2639,7 +2673,8 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x03da0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -2729,6 +2764,658 @@ }; }; + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + tpda@6004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0 0x06004000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tpda_out_funnel_qatb: endpoint { + remote-endpoint = <&funnel_qatb_in_tpda>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@9 { + reg = <9>; + tpda_9_in_tpdm_mm: endpoint { + remote-endpoint = <&tpdm_mm_out_tpda9>; + }; + }; + + port@17 { + reg = <23>; + tpda_23_in_tpdm_prng: endpoint { + remote-endpoint = <&tpdm_prng_out_tpda_23>; + }; + }; + }; + }; + + funnel@6005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06005000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_qatb_out_funnel_in0: endpoint { + remote-endpoint = <&funnel_in0_in_funnel_qatb>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_qatb_in_tpda: endpoint { + remote-endpoint = <&tpda_out_funnel_qatb>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_in0_out_funnel_merg: endpoint { + remote-endpoint = <&funnel_merg_in_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + funnel_in0_in_funnel_qatb: endpoint { + remote-endpoint = <&funnel_qatb_out_funnel_in0>; + }; + }; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06042000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_in1_out_funnel_merg: endpoint { + remote-endpoint = <&funnel_merg_in_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + funnel_in1_in_funnel_apss_merg: endpoint { + remote-endpoint = <&funnel_apss_merg_out_funnel_in1>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_merg_out_funnel_swao: endpoint { + remote-endpoint = <&funnel_swao_in_funnel_merg>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_merg_in_funnel_in0: endpoint { + remote-endpoint = <&funnel_in0_out_funnel_merg>; + }; + }; + + port@1 { + reg = <1>; + funnel_merg_in_funnel_in1: endpoint { + remote-endpoint = <&funnel_in1_out_funnel_merg>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_cx_in_swao_out: endpoint { + remote-endpoint = <&replicator_swao_out_cx_in>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out>; + }; + }; + }; + }; + + tpdm@684c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0 0x0684c000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_prng_out_tpda_23: endpoint { + remote-endpoint = <&tpda_23_in_tpdm_prng>; + }; + }; + }; + }; + + funnel@6b04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + arm,primecell-periphid = <0x000bb908>; + + reg = <0 0x06b04000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_swao_out_etf: endpoint { + remote-endpoint = <&etf_in_funnel_swao_out>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel_swao_in_funnel_merg: endpoint { + remote-endpoint= <&funnel_merg_out_funnel_swao>; + }; + }; + }; + }; + + etf@6b05000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06b05000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etf_in_funnel_swao_out: endpoint { + remote-endpoint = <&funnel_swao_out_etf>; + }; + }; + }; + }; + + replicator@6b06000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06b06000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + replicator_swao_out_cx_in: endpoint { + remote-endpoint = <&replicator_cx_in_swao_out>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + tpdm@6c08000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0 0x06c08000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_mm_out_funnel_dl_mm: endpoint { + remote-endpoint = <&funnel_dl_mm_in_tpdm_mm>; + }; + }; + }; + }; + + funnel@6c0b000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06c0b000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_dl_mm_out_funnel_dl_center: endpoint { + remote-endpoint = <&funnel_dl_center_in_funnel_dl_mm>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + funnel_dl_mm_in_tpdm_mm: endpoint { + remote-endpoint = <&tpdm_mm_out_funnel_dl_mm>; + }; + }; + }; + }; + + funnel@6c2d000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06c2d000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + port { + tpdm_mm_out_tpda9: endpoint { + remote-endpoint = <&tpda_9_in_tpdm_mm>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + funnel_dl_center_in_funnel_dl_mm: endpoint { + remote-endpoint = <&funnel_dl_mm_out_funnel_dl_center>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_apss_out_funnel_apss_merg: endpoint { + remote-endpoint = <&funnel_apss_merg_in_funnel_apss>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_apss_merg_out_funnel_in1: endpoint { + remote-endpoint = <&funnel_in1_in_funnel_apss_merg>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_apss_merg_in_funnel_apss: endpoint { + remote-endpoint = <&funnel_apss_out_funnel_apss_merg>; + }; + }; + }; + }; + cdsp: remoteproc@8300000 { compatible = "qcom,sm8250-cdsp-pas"; reg = <0 0x08300000 0 0x10000>; @@ -2826,9 +3513,6 @@ }; }; - sound: sound { - }; - usb_1_hsphy: phy@88e3000 { compatible = "qcom,sm8250-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; @@ -2891,15 +3575,11 @@ dp_phy: dp-phy@88ea200 { reg = <0 0x088ea200 0 0x200>, <0 0x088ea400 0 0x200>, - <0 0x088eac00 0 0x400>, + <0 0x088eaa00 0 0x200>, <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>, - <0 0x088eaa00 0 0x100>; + <0 0x088ea800 0 0x200>; #phy-cells = <0>; #clock-cells = <1>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; }; }; @@ -3052,8 +3732,11 @@ system-cache-controller@9200000 { compatible = "qcom,sm8250-llcc"; - reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>, + <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>, + <0 0x09600000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; }; usb_2: usb@a8f8800 { @@ -3183,7 +3866,7 @@ }; cci0: cci@ac4f000 { - compatible = "qcom,sm8250-cci"; + compatible = "qcom,sm8250-cci", "qcom,msm8996-cci"; #address-cells = <1>; #size-cells = <0>; @@ -3224,7 +3907,7 @@ }; cci1: cci@ac50000 { - compatible = "qcom,sm8250-cci"; + compatible = "qcom,sm8250-cci", "qcom,msm8996-cci"; #address-cells = <1>; #size-cells = <0>; @@ -3268,16 +3951,16 @@ compatible = "qcom,sm8250-camss"; status = "disabled"; - reg = <0 0xac6a000 0 0x2000>, - <0 0xac6c000 0 0x2000>, - <0 0xac6e000 0 0x1000>, - <0 0xac70000 0 0x1000>, - <0 0xac72000 0 0x1000>, - <0 0xac74000 0 0x1000>, - <0 0xacb4000 0 0xd000>, - <0 0xacc3000 0 0xd000>, - <0 0xacd9000 0 0x2200>, - <0 0xacdb200 0 0x2200>; + reg = <0 0x0ac6a000 0 0x2000>, + <0 0x0ac6c000 0 0x2000>, + <0 0x0ac6e000 0 0x1000>, + <0 0x0ac70000 0 0x1000>, + <0 0x0ac72000 0 0x1000>, + <0 0x0ac74000 0 0x1000>, + <0 0x0acb4000 0 0xd000>, + <0 0x0acc3000 0 0xd000>, + <0 0x0acd9000 0 0x2200>, + <0 0x0acdb200 0 0x2200>; reg-names = "csiphy0", "csiphy1", "csiphy2", @@ -3415,6 +4098,35 @@ "cam_hf_0_mnoc", "cam_sf_0_mnoc", "cam_sf_icp_mnoc"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + }; + + port@5 { + reg = <5>; + }; + }; }; camcc: clock-controller@ad00000 { @@ -3433,7 +4145,7 @@ #power-domain-cells = <1>; }; - mdss: mdss@ae00000 { + mdss: display-subsystem@ae00000 { compatible = "qcom,sm8250-mdss"; reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; @@ -3528,7 +4240,8 @@ }; dsi0: dsi@ae94000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sm8250-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; reg-names = "dsi_ctrl"; @@ -3555,7 +4268,6 @@ power-domains = <&rpmhpd SM8250_MMCX>; phys = <&dsi0_phy>; - phy-names = "dsi"; status = "disabled"; @@ -3600,7 +4312,7 @@ }; }; - dsi0_phy: dsi-phy@ae94400 { + dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, @@ -3620,7 +4332,8 @@ }; dsi1: dsi@ae96000 { - compatible = "qcom,mdss-dsi-ctrl"; + compatible = "qcom,sm8250-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae96000 0 0x400>; reg-names = "dsi_ctrl"; @@ -3647,7 +4360,6 @@ power-domains = <&rpmhpd SM8250_MMCX>; phys = <&dsi1_phy>; - phy-names = "dsi"; status = "disabled"; @@ -3673,7 +4385,7 @@ }; }; - dsi1_phy: dsi-phy@ae96400 { + dsi1_phy: phy@ae96400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, @@ -3749,7 +4461,7 @@ #thermal-sensor-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP @@ -3798,8 +4510,41 @@ gpio-ranges = <&tlmm 0 0 181>; wakeup-parent = <&pdc>; - cci0_default: cci0-default { - cci0_i2c0_default: cci0-i2c0-default { + cam2_default: cam2-default-state { + rst-pins { + pins = "gpio78"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mclk-pins { + pins = "gpio96"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + }; + + cam2_suspend: cam2-suspend-state { + rst-pins { + pins = "gpio78"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-low; + }; + + mclk-pins { + pins = "gpio96"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cci0_default: cci0-default-state { + cci0_i2c0_default: cci0-i2c0-default-pins { /* SDA, SCL */ pins = "gpio101", "gpio102"; function = "cci_i2c"; @@ -3808,7 +4553,7 @@ drive-strength = <2>; /* 2 mA */ }; - cci0_i2c1_default: cci0-i2c1-default { + cci0_i2c1_default: cci0-i2c1-default-pins { /* SDA, SCL */ pins = "gpio103", "gpio104"; function = "cci_i2c"; @@ -3818,8 +4563,8 @@ }; }; - cci0_sleep: cci0-sleep { - cci0_i2c0_sleep: cci0-i2c0-sleep { + cci0_sleep: cci0-sleep-state { + cci0_i2c0_sleep: cci0-i2c0-sleep-pins { /* SDA, SCL */ pins = "gpio101", "gpio102"; function = "cci_i2c"; @@ -3828,7 +4573,7 @@ bias-pull-down; }; - cci0_i2c1_sleep: cci0-i2c1-sleep { + cci0_i2c1_sleep: cci0-i2c1-sleep-pins { /* SDA, SCL */ pins = "gpio103", "gpio104"; function = "cci_i2c"; @@ -3838,8 +4583,8 @@ }; }; - cci1_default: cci1-default { - cci1_i2c0_default: cci1-i2c0-default { + cci1_default: cci1-default-state { + cci1_i2c0_default: cci1-i2c0-default-pins { /* SDA, SCL */ pins = "gpio105","gpio106"; function = "cci_i2c"; @@ -3848,7 +4593,7 @@ drive-strength = <2>; /* 2 mA */ }; - cci1_i2c1_default: cci1-i2c1-default { + cci1_i2c1_default: cci1-i2c1-default-pins { /* SDA, SCL */ pins = "gpio107","gpio108"; function = "cci_i2c"; @@ -3858,8 +4603,8 @@ }; }; - cci1_sleep: cci1-sleep { - cci1_i2c0_sleep: cci1-i2c0-sleep { + cci1_sleep: cci1-sleep-state { + cci1_i2c0_sleep: cci1-i2c0-sleep-pins { /* SDA, SCL */ pins = "gpio105","gpio106"; function = "cci_i2c"; @@ -3868,7 +4613,7 @@ drive-strength = <2>; /* 2 mA */ }; - cci1_i2c1_sleep: cci1-i2c1-sleep { + cci1_i2c1_sleep: cci1-i2c1-sleep-pins { /* SDA, SCL */ pins = "gpio107","gpio108"; function = "cci_i2c"; @@ -3878,22 +4623,22 @@ }; }; - pri_mi2s_active: pri-mi2s-active { - sclk { + pri_mi2s_active: pri-mi2s-active-state { + sclk-pins { pins = "gpio138"; function = "mi2s0_sck"; drive-strength = <8>; bias-disable; }; - ws { + ws-pins { pins = "gpio141"; function = "mi2s0_ws"; drive-strength = <8>; output-high; }; - data0 { + data0-pins { pins = "gpio139"; function = "mi2s0_data0"; drive-strength = <8>; @@ -3901,7 +4646,7 @@ output-high; }; - data1 { + data1-pins { pins = "gpio140"; function = "mi2s0_data1"; drive-strength = <8>; @@ -3909,632 +4654,500 @@ }; }; - qup_i2c0_default: qup-i2c0-default { - mux { - pins = "gpio28", "gpio29"; - function = "qup0"; - }; - - config { - pins = "gpio28", "gpio29"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio28", "gpio29"; + function = "qup0"; + drive-strength = <2>; + bias-disable; }; - qup_i2c1_default: qup-i2c1-default { - pinmux { - pins = "gpio4", "gpio5"; - function = "qup1"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio4", "gpio5"; + function = "qup1"; + drive-strength = <2>; + bias-disable; }; - qup_i2c2_default: qup-i2c2-default { - mux { - pins = "gpio115", "gpio116"; - function = "qup2"; - }; - - config { - pins = "gpio115", "gpio116"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio115", "gpio116"; + function = "qup2"; + drive-strength = <2>; + bias-disable; }; - qup_i2c3_default: qup-i2c3-default { - mux { - pins = "gpio119", "gpio120"; - function = "qup3"; - }; - - config { - pins = "gpio119", "gpio120"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio119", "gpio120"; + function = "qup3"; + drive-strength = <2>; + bias-disable; }; - qup_i2c4_default: qup-i2c4-default { - mux { - pins = "gpio8", "gpio9"; - function = "qup4"; - }; - - config { - pins = "gpio8", "gpio9"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio8", "gpio9"; + function = "qup4"; + drive-strength = <2>; + bias-disable; }; - qup_i2c5_default: qup-i2c5-default { - mux { - pins = "gpio12", "gpio13"; - function = "qup5"; - }; - - config { - pins = "gpio12", "gpio13"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio12", "gpio13"; + function = "qup5"; + drive-strength = <2>; + bias-disable; }; - qup_i2c6_default: qup-i2c6-default { - mux { - pins = "gpio16", "gpio17"; - function = "qup6"; - }; - - config { - pins = "gpio16", "gpio17"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio16", "gpio17"; + function = "qup6"; + drive-strength = <2>; + bias-disable; }; - qup_i2c7_default: qup-i2c7-default { - mux { - pins = "gpio20", "gpio21"; - function = "qup7"; - }; - - config { - pins = "gpio20", "gpio21"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio20", "gpio21"; + function = "qup7"; + drive-strength = <2>; + bias-disable; }; - qup_i2c8_default: qup-i2c8-default { - mux { - pins = "gpio24", "gpio25"; - function = "qup8"; - }; - - config { - pins = "gpio24", "gpio25"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio24", "gpio25"; + function = "qup8"; + drive-strength = <2>; + bias-disable; }; - qup_i2c9_default: qup-i2c9-default { - mux { - pins = "gpio125", "gpio126"; - function = "qup9"; - }; - - config { - pins = "gpio125", "gpio126"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio125", "gpio126"; + function = "qup9"; + drive-strength = <2>; + bias-disable; }; - qup_i2c10_default: qup-i2c10-default { - mux { - pins = "gpio129", "gpio130"; - function = "qup10"; - }; - - config { - pins = "gpio129", "gpio130"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio129", "gpio130"; + function = "qup10"; + drive-strength = <2>; + bias-disable; }; - qup_i2c11_default: qup-i2c11-default { - mux { - pins = "gpio60", "gpio61"; - function = "qup11"; - }; - - config { - pins = "gpio60", "gpio61"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio60", "gpio61"; + function = "qup11"; + drive-strength = <2>; + bias-disable; }; - qup_i2c12_default: qup-i2c12-default { - mux { - pins = "gpio32", "gpio33"; - function = "qup12"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c12_default: qup-i2c12-default-state { + pins = "gpio32", "gpio33"; + function = "qup12"; + drive-strength = <2>; + bias-disable; }; - qup_i2c13_default: qup-i2c13-default { - mux { - pins = "gpio36", "gpio37"; - function = "qup13"; - }; - - config { - pins = "gpio36", "gpio37"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c13_default: qup-i2c13-default-state { + pins = "gpio36", "gpio37"; + function = "qup13"; + drive-strength = <2>; + bias-disable; }; - qup_i2c14_default: qup-i2c14-default { - mux { - pins = "gpio40", "gpio41"; - function = "qup14"; - }; - - config { - pins = "gpio40", "gpio41"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c14_default: qup-i2c14-default-state { + pins = "gpio40", "gpio41"; + function = "qup14"; + drive-strength = <2>; + bias-disable; }; - qup_i2c15_default: qup-i2c15-default { - mux { - pins = "gpio44", "gpio45"; - function = "qup15"; - }; - - config { - pins = "gpio44", "gpio45"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c15_default: qup-i2c15-default-state { + pins = "gpio44", "gpio45"; + function = "qup15"; + drive-strength = <2>; + bias-disable; }; - qup_i2c16_default: qup-i2c16-default { - mux { - pins = "gpio48", "gpio49"; - function = "qup16"; - }; - - config { - pins = "gpio48", "gpio49"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c16_default: qup-i2c16-default-state { + pins = "gpio48", "gpio49"; + function = "qup16"; + drive-strength = <2>; + bias-disable; }; - qup_i2c17_default: qup-i2c17-default { - mux { - pins = "gpio52", "gpio53"; - function = "qup17"; - }; - - config { - pins = "gpio52", "gpio53"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c17_default: qup-i2c17-default-state { + pins = "gpio52", "gpio53"; + function = "qup17"; + drive-strength = <2>; + bias-disable; }; - qup_i2c18_default: qup-i2c18-default { - mux { - pins = "gpio56", "gpio57"; - function = "qup18"; - }; - - config { - pins = "gpio56", "gpio57"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c18_default: qup-i2c18-default-state { + pins = "gpio56", "gpio57"; + function = "qup18"; + drive-strength = <2>; + bias-disable; }; - qup_i2c19_default: qup-i2c19-default { - mux { - pins = "gpio0", "gpio1"; - function = "qup19"; - }; - - config { - pins = "gpio0", "gpio1"; - drive-strength = <2>; - bias-disable; - }; + qup_i2c19_default: qup-i2c19-default-state { + pins = "gpio0", "gpio1"; + function = "qup19"; + drive-strength = <2>; + bias-disable; }; - qup_spi0_cs: qup-spi0-cs { + qup_spi0_cs: qup-spi0-cs-state { pins = "gpio31"; function = "qup0"; }; - qup_spi0_cs_gpio: qup-spi0-cs-gpio { + qup_spi0_cs_gpio: qup-spi0-cs-gpio-state { pins = "gpio31"; function = "gpio"; }; - qup_spi0_data_clk: qup-spi0-data-clk { + qup_spi0_data_clk: qup-spi0-data-clk-state { pins = "gpio28", "gpio29", "gpio30"; function = "qup0"; }; - qup_spi1_cs: qup-spi1-cs { + qup_spi1_cs: qup-spi1-cs-state { pins = "gpio7"; function = "qup1"; }; - qup_spi1_cs_gpio: qup-spi1-cs-gpio { + qup_spi1_cs_gpio: qup-spi1-cs-gpio-state { pins = "gpio7"; function = "gpio"; }; - qup_spi1_data_clk: qup-spi1-data-clk { + qup_spi1_data_clk: qup-spi1-data-clk-state { pins = "gpio4", "gpio5", "gpio6"; function = "qup1"; }; - qup_spi2_cs: qup-spi2-cs { + qup_spi2_cs: qup-spi2-cs-state { pins = "gpio118"; function = "qup2"; }; - qup_spi2_cs_gpio: qup-spi2-cs-gpio { + qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { pins = "gpio118"; function = "gpio"; }; - qup_spi2_data_clk: qup-spi2-data-clk { + qup_spi2_data_clk: qup-spi2-data-clk-state { pins = "gpio115", "gpio116", "gpio117"; function = "qup2"; }; - qup_spi3_cs: qup-spi3-cs { + qup_spi3_cs: qup-spi3-cs-state { pins = "gpio122"; function = "qup3"; }; - qup_spi3_cs_gpio: qup-spi3-cs-gpio { + qup_spi3_cs_gpio: qup-spi3-cs-gpio-state { pins = "gpio122"; function = "gpio"; }; - qup_spi3_data_clk: qup-spi3-data-clk { + qup_spi3_data_clk: qup-spi3-data-clk-state { pins = "gpio119", "gpio120", "gpio121"; function = "qup3"; }; - qup_spi4_cs: qup-spi4-cs { + qup_spi4_cs: qup-spi4-cs-state { pins = "gpio11"; function = "qup4"; }; - qup_spi4_cs_gpio: qup-spi4-cs-gpio { + qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { pins = "gpio11"; function = "gpio"; }; - qup_spi4_data_clk: qup-spi4-data-clk { + qup_spi4_data_clk: qup-spi4-data-clk-state { pins = "gpio8", "gpio9", "gpio10"; function = "qup4"; }; - qup_spi5_cs: qup-spi5-cs { + qup_spi5_cs: qup-spi5-cs-state { pins = "gpio15"; function = "qup5"; }; - qup_spi5_cs_gpio: qup-spi5-cs-gpio { + qup_spi5_cs_gpio: qup-spi5-cs-gpio-state { pins = "gpio15"; function = "gpio"; }; - qup_spi5_data_clk: qup-spi5-data-clk { + qup_spi5_data_clk: qup-spi5-data-clk-state { pins = "gpio12", "gpio13", "gpio14"; function = "qup5"; }; - qup_spi6_cs: qup-spi6-cs { + qup_spi6_cs: qup-spi6-cs-state { pins = "gpio19"; function = "qup6"; }; - qup_spi6_cs_gpio: qup-spi6-cs-gpio { + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { pins = "gpio19"; function = "gpio"; }; - qup_spi6_data_clk: qup-spi6-data-clk { + qup_spi6_data_clk: qup-spi6-data-clk-state { pins = "gpio16", "gpio17", "gpio18"; function = "qup6"; }; - qup_spi7_cs: qup-spi7-cs { + qup_spi7_cs: qup-spi7-cs-state { pins = "gpio23"; function = "qup7"; }; - qup_spi7_cs_gpio: qup-spi7-cs-gpio { + qup_spi7_cs_gpio: qup-spi7-cs-gpio-state { pins = "gpio23"; function = "gpio"; }; - qup_spi7_data_clk: qup-spi7-data-clk { + qup_spi7_data_clk: qup-spi7-data-clk-state { pins = "gpio20", "gpio21", "gpio22"; function = "qup7"; }; - qup_spi8_cs: qup-spi8-cs { + qup_spi8_cs: qup-spi8-cs-state { pins = "gpio27"; function = "qup8"; }; - qup_spi8_cs_gpio: qup-spi8-cs-gpio { + qup_spi8_cs_gpio: qup-spi8-cs-gpio-state { pins = "gpio27"; function = "gpio"; }; - qup_spi8_data_clk: qup-spi8-data-clk { + qup_spi8_data_clk: qup-spi8-data-clk-state { pins = "gpio24", "gpio25", "gpio26"; function = "qup8"; }; - qup_spi9_cs: qup-spi9-cs { + qup_spi9_cs: qup-spi9-cs-state { pins = "gpio128"; function = "qup9"; }; - qup_spi9_cs_gpio: qup-spi9-cs-gpio { + qup_spi9_cs_gpio: qup-spi9-cs-gpio-state { pins = "gpio128"; function = "gpio"; }; - qup_spi9_data_clk: qup-spi9-data-clk { + qup_spi9_data_clk: qup-spi9-data-clk-state { pins = "gpio125", "gpio126", "gpio127"; function = "qup9"; }; - qup_spi10_cs: qup-spi10-cs { + qup_spi10_cs: qup-spi10-cs-state { pins = "gpio132"; function = "qup10"; }; - qup_spi10_cs_gpio: qup-spi10-cs-gpio { + qup_spi10_cs_gpio: qup-spi10-cs-gpio-state { pins = "gpio132"; function = "gpio"; }; - qup_spi10_data_clk: qup-spi10-data-clk { + qup_spi10_data_clk: qup-spi10-data-clk-state { pins = "gpio129", "gpio130", "gpio131"; function = "qup10"; }; - qup_spi11_cs: qup-spi11-cs { + qup_spi11_cs: qup-spi11-cs-state { pins = "gpio63"; function = "qup11"; }; - qup_spi11_cs_gpio: qup-spi11-cs-gpio { + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { pins = "gpio63"; function = "gpio"; }; - qup_spi11_data_clk: qup-spi11-data-clk { + qup_spi11_data_clk: qup-spi11-data-clk-state { pins = "gpio60", "gpio61", "gpio62"; function = "qup11"; }; - qup_spi12_cs: qup-spi12-cs { + qup_spi12_cs: qup-spi12-cs-state { pins = "gpio35"; function = "qup12"; }; - qup_spi12_cs_gpio: qup-spi12-cs-gpio { + qup_spi12_cs_gpio: qup-spi12-cs-gpio-state { pins = "gpio35"; function = "gpio"; }; - qup_spi12_data_clk: qup-spi12-data-clk { + qup_spi12_data_clk: qup-spi12-data-clk-state { pins = "gpio32", "gpio33", "gpio34"; function = "qup12"; }; - qup_spi13_cs: qup-spi13-cs { + qup_spi13_cs: qup-spi13-cs-state { pins = "gpio39"; function = "qup13"; }; - qup_spi13_cs_gpio: qup-spi13-cs-gpio { + qup_spi13_cs_gpio: qup-spi13-cs-gpio-state { pins = "gpio39"; function = "gpio"; }; - qup_spi13_data_clk: qup-spi13-data-clk { + qup_spi13_data_clk: qup-spi13-data-clk-state { pins = "gpio36", "gpio37", "gpio38"; function = "qup13"; }; - qup_spi14_cs: qup-spi14-cs { + qup_spi14_cs: qup-spi14-cs-state { pins = "gpio43"; function = "qup14"; }; - qup_spi14_cs_gpio: qup-spi14-cs-gpio { + qup_spi14_cs_gpio: qup-spi14-cs-gpio-state { pins = "gpio43"; function = "gpio"; }; - qup_spi14_data_clk: qup-spi14-data-clk { + qup_spi14_data_clk: qup-spi14-data-clk-state { pins = "gpio40", "gpio41", "gpio42"; function = "qup14"; }; - qup_spi15_cs: qup-spi15-cs { + qup_spi15_cs: qup-spi15-cs-state { pins = "gpio47"; function = "qup15"; }; - qup_spi15_cs_gpio: qup-spi15-cs-gpio { + qup_spi15_cs_gpio: qup-spi15-cs-gpio-state { pins = "gpio47"; function = "gpio"; }; - qup_spi15_data_clk: qup-spi15-data-clk { + qup_spi15_data_clk: qup-spi15-data-clk-state { pins = "gpio44", "gpio45", "gpio46"; function = "qup15"; }; - qup_spi16_cs: qup-spi16-cs { + qup_spi16_cs: qup-spi16-cs-state { pins = "gpio51"; function = "qup16"; }; - qup_spi16_cs_gpio: qup-spi16-cs-gpio { + qup_spi16_cs_gpio: qup-spi16-cs-gpio-state { pins = "gpio51"; function = "gpio"; }; - qup_spi16_data_clk: qup-spi16-data-clk { + qup_spi16_data_clk: qup-spi16-data-clk-state { pins = "gpio48", "gpio49", "gpio50"; function = "qup16"; }; - qup_spi17_cs: qup-spi17-cs { + qup_spi17_cs: qup-spi17-cs-state { pins = "gpio55"; function = "qup17"; }; - qup_spi17_cs_gpio: qup-spi17-cs-gpio { + qup_spi17_cs_gpio: qup-spi17-cs-gpio-state { pins = "gpio55"; function = "gpio"; }; - qup_spi17_data_clk: qup-spi17-data-clk { + qup_spi17_data_clk: qup-spi17-data-clk-state { pins = "gpio52", "gpio53", "gpio54"; function = "qup17"; }; - qup_spi18_cs: qup-spi18-cs { + qup_spi18_cs: qup-spi18-cs-state { pins = "gpio59"; function = "qup18"; }; - qup_spi18_cs_gpio: qup-spi18-cs-gpio { + qup_spi18_cs_gpio: qup-spi18-cs-gpio-state { pins = "gpio59"; function = "gpio"; }; - qup_spi18_data_clk: qup-spi18-data-clk { + qup_spi18_data_clk: qup-spi18-data-clk-state { pins = "gpio56", "gpio57", "gpio58"; function = "qup18"; }; - qup_spi19_cs: qup-spi19-cs { + qup_spi19_cs: qup-spi19-cs-state { pins = "gpio3"; function = "qup19"; }; - qup_spi19_cs_gpio: qup-spi19-cs-gpio { + qup_spi19_cs_gpio: qup-spi19-cs-gpio-state { pins = "gpio3"; function = "gpio"; }; - qup_spi19_data_clk: qup-spi19-data-clk { + qup_spi19_data_clk: qup-spi19-data-clk-state { pins = "gpio0", "gpio1", "gpio2"; function = "qup19"; }; - qup_uart2_default: qup-uart2-default { - mux { - pins = "gpio117", "gpio118"; - function = "qup2"; - }; + qup_uart2_default: qup-uart2-default-state { + pins = "gpio117", "gpio118"; + function = "qup2"; }; - qup_uart6_default: qup-uart6-default { - mux { - pins = "gpio16", "gpio17", - "gpio18", "gpio19"; - function = "qup6"; - }; + qup_uart6_default: qup-uart6-default-state { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "qup6"; }; - qup_uart12_default: qup-uart12-default { - mux { - pins = "gpio34", "gpio35"; - function = "qup12"; - }; + qup_uart12_default: qup-uart12-default-state { + pins = "gpio34", "gpio35"; + function = "qup12"; }; - qup_uart17_default: qup-uart17-default { - mux { - pins = "gpio52", "gpio53", - "gpio54", "gpio55"; - function = "qup17"; - }; + qup_uart17_default: qup-uart17-default-state { + pins = "gpio52", "gpio53", "gpio54", "gpio55"; + function = "qup17"; }; - qup_uart18_default: qup-uart18-default { - mux { - pins = "gpio58", "gpio59"; - function = "qup18"; - }; + qup_uart18_default: qup-uart18-default-state { + pins = "gpio58", "gpio59"; + function = "qup18"; }; - tert_mi2s_active: tert-mi2s-active { - sck { + tert_mi2s_active: tert-mi2s-active-state { + sck-pins { pins = "gpio133"; function = "mi2s2_sck"; drive-strength = <8>; bias-disable; }; - data0 { + data0-pins { pins = "gpio134"; function = "mi2s2_data0"; drive-strength = <8>; @@ -4542,7 +5155,7 @@ output-high; }; - ws { + ws-pins { pins = "gpio135"; function = "mi2s2_ws"; drive-strength = <8>; @@ -4550,42 +5163,42 @@ }; }; - sdc2_sleep_state: sdc2-sleep { - clk { + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-pull-up; }; - data { + data-pins { pins = "sdc2_data"; drive-strength = <2>; bias-pull-up; }; }; - pcie0_default_state: pcie0-default { - perst { + pcie0_default_state: pcie0-default-state { + perst-pins { pins = "gpio79"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio80"; function = "pci_e0"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio81"; function = "gpio"; drive-strength = <2>; @@ -4593,22 +5206,22 @@ }; }; - pcie1_default_state: pcie1-default { - perst { + pcie1_default_state: pcie1-default-state { + perst-pins { pins = "gpio82"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio83"; function = "pci_e1"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio84"; function = "gpio"; drive-strength = <2>; @@ -4616,22 +5229,22 @@ }; }; - pcie2_default_state: pcie2-default { - perst { + pcie2_default_state: pcie2-default-state { + perst-pins { pins = "gpio85"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; - clkreq { + clkreq-pins { pins = "gpio86"; function = "pci_e2"; drive-strength = <2>; bias-pull-up; }; - wake { + wake-pins { pins = "gpio87"; function = "gpio"; drive-strength = <2>; @@ -4790,13 +5403,13 @@ #address-cells = <1>; #size-cells = <0>; - apr-service@3 { + service@3 { reg = <APR_SVC_ADSP_CORE>; compatible = "qcom,q6core"; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; }; - q6afe: apr-service@4 { + q6afe: service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; @@ -4807,13 +5420,13 @@ #sound-dai-cells = <1>; }; - q6afecc: cc { + q6afecc: clock-controller { compatible = "qcom,q6afe-clocks"; #clock-cells = <2>; }; }; - q6asm: apr-service@7 { + q6asm: service@7 { compatible = "qcom,q6asm"; reg = <APR_SVC_ASM>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; @@ -4826,7 +5439,7 @@ }; }; - q6adm: apr-service@8 { + q6adm: service@8 { compatible = "qcom,q6adm"; reg = <APR_SVC_ADM>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; @@ -4955,6 +5568,7 @@ qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; rpmhcc: clock-controller { compatible = "qcom,sm8250-rpmh-clk"; @@ -5019,7 +5633,7 @@ }; epss_l3: interconnect@18590000 { - compatible = "qcom,sm8250-epss-l3"; + compatible = "qcom,sm8250-epss-l3", "qcom,epss-l3"; reg = <0 0x18590000 0 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; @@ -5043,9 +5657,13 @@ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; + sound: sound { + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -5078,7 +5696,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5122,7 +5740,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5166,7 +5784,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5210,7 +5828,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5254,7 +5872,7 @@ type = "passive"; }; - cpu4_top_crit: cpu_crit { + cpu4_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5298,7 +5916,7 @@ type = "passive"; }; - cpu5_top_crit: cpu_crit { + cpu5_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5342,7 +5960,7 @@ type = "passive"; }; - cpu6_top_crit: cpu_crit { + cpu6_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5386,7 +6004,7 @@ type = "passive"; }; - cpu7_top_crit: cpu_crit { + cpu7_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5430,7 +6048,7 @@ type = "passive"; }; - cpu4_bottom_crit: cpu_crit { + cpu4_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5474,7 +6092,7 @@ type = "passive"; }; - cpu5_bottom_crit: cpu_crit { + cpu5_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5518,7 +6136,7 @@ type = "passive"; }; - cpu6_bottom_crit: cpu_crit { + cpu6_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -5562,7 +6180,7 @@ type = "passive"; }; - cpu7_bottom_crit: cpu_crit { + cpu7_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 0fcf5bd88fc7..2ee1b121686a 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -20,6 +20,51 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + pmic-glink { + compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -29,6 +74,31 @@ regulator-always-on; regulator-boot-on; }; + + lt9611_1v2: lt9611-1v2-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + vin-supply = <&vph_pwr>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + lt9611_3v3: lt9611-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vreg_bob>; + gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; }; &adsp { @@ -37,7 +107,7 @@ }; &apps_rsc { - pm8350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -107,6 +177,8 @@ regulator-max-microvolt = <888000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l6b_1p2: ldo6 { @@ -115,6 +187,8 @@ regulator-max-microvolt = <1208000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7b_2p96: ldo7 { @@ -123,6 +197,8 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l9b_1p2: ldo9 { @@ -131,10 +207,12 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; }; - pm8350c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -213,19 +291,135 @@ firmware-name = "qcom/sm8350/cdsp.mbn"; }; +&dispcc { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l6b_1p2>; + status = "okay"; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l5b_0p88>; + status = "okay"; +}; + &gpi_dma1 { status = "okay"; }; +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8350/a660_zap.mbn"; + }; +}; + +&i2c15 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 50 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_state>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + &mpss { status = "okay"; firmware-name = "qcom/sm8350/modem.mbn"; }; +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_2 { + status = "okay"; +}; + &slpi { status = "okay"; firmware-name = "qcom/sm8350/slpi.mbn"; @@ -233,6 +427,257 @@ &tlmm { gpio-reserved-ranges = <52 8>; + + gpio-line-names = + "APPS_I2C_SDA", /* GPIO_0 */ + "APPS_I2C_SCL", + "FSA_INT_N", + "USER_LED3_EN", + "SMBUS_SDA_1P8", + "SMBUS_SCL_1P8", + "2M2_3P3_EN", + "ALERT_DUAL_M2_N", + "EXP_UART_CTS", + "EXP_UART_RFR", + "EXP_UART_TX", /* GPIO_10 */ + "EXP_UART_RX", + "NC", + "NC", + "RCM_MARKER1", + "WSA0_EN", + "CAM1_RESET_N", + "CAM0_RESET_N", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "TS_I2C_SDA", /* GPIO_20 */ + "TS_I2C_SCL", + "TS_RESET_N", + "TS_INT_N", + "DISP0_RESET_N", + "DISP1_RESET_N", + "ETH_RESET", + "RCM_MARKER2", + "CAM_DC_MIPI_MUX_EN", + "CAM_DC_MIPI_MUX_SEL", + "AFC_PHY_TA_D_PLUS", /* GPIO_30 */ + "AFC_PHY_TA_D_MINUS", + "PM8008_1_IRQ", + "PM8008_1_RESET_N", + "PM8008_2_IRQ", + "PM8008_2_RESET_N", + "CAM_DC_I3C_SDA", + "CAM_DC_I3C_SCL", + "FP_INT_N", + "FP_WUHB_INT_N", + "SMB_SPMI_DATA", /* GPIO_40 */ + "SMB_SPMI_CLK", + "USB_HUB_RESET", + "FORCE_USB_BOOT", + "LRF_IRQ", + "NC", + "IMU2_INT", + "HDMI_3P3_EN", + "HDMI_RSTN", + "HDMI_1P2_EN", + "HDMI_INT", /* GPIO_50 */ + "USB1_ID", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_CLK", + "FP_SPI_CS_N", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_CLK", + "NFC_ESE_SPI_CS", + "NFC_I2C_SDA", /* GPIO_60 */ + "NFC_I2C_SCLC", + "NFC_EN", + "NFC_CLK_REQ", + "HST_WLAN_EN", + "HST_BT_EN", + "HST_SW_CTRL", + "NC", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", /* GPIO_70 */ + "HST_BT_UART_RX", + "CAM_DC_SPI0_MISO", + "CAM_DC_SPI0_MOSI", + "CAM_DC_SPI0_CLK", + "CAM_DC_SPI0_CS_N", + "CAM_DC_SPI1_MISO", + "CAM_DC_SPI1_MOSI", + "CAM_DC_SPI1_CLK", + "CAM_DC_SPI1_CS_N", + "HALL_INT_N", /* GPIO_80 */ + "USB_PHY_PS", + "MDP_VSYNC_P", + "MDP_VSYNC_S", + "ETH_3P3_EN", + "RADAR_INT", + "NFC_DWL_REQ", + "SM_GPIO_87", + "WCD_RESET_N", + "ALSP_INT_N", + "PRESS_INT", /* GPIO_90 */ + "SAR_INT_N", + "SD_CARD_DET_N", + "NC", + "PCIE0_RESET_N", + "PCIE0_CLK_REQ_N", + "PCIE0_WAKE_N", + "PCIE1_RESET_N", + "PCIE1_CLK_REQ_N", + "PCIE1_WAKE_N", + "CAM_MCLK0", /* GPIO_100 */ + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "CAM_MCLK4", + "CAM_MCLK5", + "CAM2_RESET_N", + "CCI_I2C0_SDA", + "CCI_I2C0_SCL", + "CCI_I2C1_SDA", + "CCI_I2C1_SCL", /* GPIO_110 */ + "CCI_I2C2_SDA", + "CCI_I2C2_SCL", + "CCI_I2C3_SDA", + "CCI_I2C3_SCL", + "CAM5_RESET_N", + "CAM4_RESET_N", + "CAM3_RESET_N", + "IMU1_INT", + "MAG_INT_N", + "MI2S2_I2S_SCK", /* GPIO_120 */ + "MI2S2_I2S_DAT0", + "MI2S2_I2S_WS", + "HIFI_DAC_I2S_MCLK", + "MI2S2_I2S_DAT1", + "HIFI_DAC_I2S_SCK", + "HIFI_DAC_I2S_DAT0", + "NC", + "HIFI_DAC_I2S_WS", + "HST_BT_WLAN_SLIMBUS_CLK", + "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */ + "BT_LED_EN", + "WLAN_LED_EN", + "NC", + "NC", + "NC", + "UIM2_PRESENT", + "NC", + "NC", + "NC", + "UIM1_PRESENT", /* GPIO_140 */ + "NC", + "SM_RFFE0_DATA", + "NC", + "SM_RFFE1_DATA", + "SM_MSS_GRFC4", + "SM_MSS_GRFC5", + "SM_MSS_GRFC6", + "SM_MSS_GRFC7", + "SM_RFFE4_CLK", + "SM_RFFE4_DATA", /* GPIO_150 */ + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "HST_SW_CTRL", + "DSI0_STATUS", + "DSI1_STATUS", + "APPS_PBL_BOOT_SPEED_1", + "APPS_BOOT_FROM_ROM", + "APPS_PBL_BOOT_SPEED_0", + "QLINK0_REQ", + "QLINK0_EN", /* GPIO_160 */ + "QLINK0_WMSS_RESET_N", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", /* GPIO_170 */ + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + "DMIC01_CLK", + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "WSA_SWR_CLK", + "WSA_SWR_DATA", + "DMIC45_CLK", /* GPIO_180 */ + "DMIC45_DATA", + "WCD_SWR_TX_DATA2", + "SENSOR_I3C_SDA", + "SENSOR_I3C_SCL", + "CAM_OIS0_I3C_SDA", + "CAM_OIS0_I3C_SCL", + "IMU_SPI_MISO", + "IMU_SPI_MOSI", + "IMU_SPI_CLK", + "IMU_SPI_CS_N", /* GPIO_190 */ + "MAG_I2C_SDA", + "MAG_I2C_SCL", + "SENSOR_I2C_SDA", + "SENSOR_I2C_SCL", + "RADAR_SPI_MISO", + "RADAR_SPI_MOSI", + "RADAR_SPI_CLK", + "RADAR_SPI_CS_N", + "HST_BLE_UART_TX", + "HST_BLE_UART_RX", /* GPIO_200 */ + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio95"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio98"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; &uart2 { @@ -262,8 +707,16 @@ }; &usb_1_dwc3 { - /* TODO: Define USB-C connector properly */ - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { @@ -317,4 +770,20 @@ drive-strength = <2>; output-low; }; + + lt9611_state: lt9611-state { + rst-pins { + pins = "gpio48"; + function = "gpio"; + + output-high; + input-disable; + }; + + irq-pins { + pins = "gpio50"; + function = "gpio"; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts index 9c4cfd995ff2..3bd5e57cbcda 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts @@ -44,7 +44,7 @@ }; &apps_rsc { - pm8350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -135,7 +135,7 @@ }; }; - pm8350c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -290,9 +290,9 @@ }; &ipa { - status = "okay"; - + qcom,gsi-loader = "self"; memory-region = <&pil_ipa_fw_mem>; + status = "okay"; }; &mpss { @@ -341,6 +341,9 @@ &usb_1 { status = "okay"; +}; + +&usb_1_dwc3 { dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts index 52cf3045602f..d21d2aacf201 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -43,7 +43,7 @@ }; &apps_rsc { - pm8350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -134,7 +134,7 @@ }; }; - pm8350c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -376,7 +376,7 @@ }; &ipa { - status = "okay"; - + qcom,gsi-loader = "self"; memory-region = <&pil_ipa_fw_mem>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts index cc650508dc2d..e6824c8c2774 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts @@ -17,3 +17,26 @@ height = <2520>; stride = <(1080 * 4)>; }; + +&pm8350b_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "NC", + "NC", + "SNAPSHOT_N", + "NC", + "NC", + "FOCUS_N"; +}; + +&pm8350c_gpios { + gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */ + "FL_STROBE_TRIG_TELE", + "NC", + "NC", + "NC", + "RGBC_IR_PWR_EN", + "NC", + "NC", + "WIDEC_PWR_EN"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts index d21bbeb603a6..c6f402c3ef35 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts @@ -11,3 +11,296 @@ model = "Sony Xperia 1 III"; compatible = "sony,pdx215-generic", "qcom,sm8350"; }; + +&i2c13 { + pmic@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&cam_pwr_a_cs>; + + regulators { + slg51000_a_ldo1: ldo1 { + regulator-name = "slg51000_a_ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_a_ldo2: ldo2 { + regulator-name = "slg51000_a_ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_a_ldo3: ldo3 { + regulator-name = "slg51000_a_ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_a_ldo4: ldo4 { + regulator-name = "slg51000_a_ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_a_ldo5: ldo5 { + regulator-name = "slg51000_a_ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_a_ldo6: ldo6 { + regulator-name = "slg51000_a_ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_a_ldo7: ldo7 { + regulator-name = "slg51000_a_ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; +}; + +&pm8350b_gpios { + gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */ + "NC", + "NC", + "NC", + "SNAPSHOT_N", + "CAM_PWR_LD_EN", + "NC", + "FOCUS_N"; + + cam_pwr_a_cs: cam-pwr-a-cs-state { + pins = "gpio1"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <1>; + drive-push-pull; + output-high; + }; +}; + +&pm8350c_gpios { + gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */ + "FL_STROBE_TRIG_TELE", + "NC", + "WLC_TXPWR_EN", + "NC", + "RGBC_IR_PWR_EN", + "NC", + "NC", + "WIDEC_PWR_EN"; +}; + +&tlmm { + gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */ + "APPS_I2C_0_SCL", + "UWIDEC_PWR_EN", + "HAP_RST_N", + "WLC_I2C_SDA", + "WLC_I2C_SCL", + "PM8008_1_RESET_N", + "WLC_INT_N", + "OIS_TELE_I2C_SDA", + "OIS_TELE_I2C_SCL", + "PM8350_OPTION", /* GPIO_10 */ + "NC", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "NC", + "NC", + "CAM1_RESET_N", + "LEO_CAM0_RESET_N", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "TS_I2C_SDA", /* GPIO_20 */ + "TS_I2C_SCL", + "TS_RESET_N", + "TS_INT_N", + "DISP_RESET_N", + "SW_SERVICE", + "DISP_ERR_FG", + "TX_GTR_THRES_IN", + "NC", + "NC", + "NC", /* GPIO_30 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "SPK_AMP_INT_N", + "SPK_AMP_RESET_N", + "FP_INT_N", + "FP_RESET_N", + "NC", /* GPIO_40 */ + "NC", + "DEBUG_GPIO0", + "FORCE_USB_BOOT", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_CLK", + "FP_SPI_CS_N", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", /* GPIO_50 */ + "HAP_INT_N", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "SBU_SW_OE", + "SBU_SW_SEL", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_CLK", + "NFC_ESE_SPI_CS", + "NFC_I2C_SDA", /* GPIO_60 */ + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "HST_WLAN_EN", + "HST_BT_EN", + "HW_ID_0", + "HW_ID_1", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", /* GPIO_70 */ + "HST_BT_UART_RX", + "HAP_I2C_SDA", + "HAP_I2C_SCL", + "RF_LCD_ID_EN", + "RF_ID_EXTENSION", + "NC", + "NC", + "NC", + "NC", + "HALL_INT_N", /* GPIO_80 */ + "USB_CC_DIR", + "DISP_VSYNC", + "NC", + "NC", + "CAM_SOF_TELE", + "NFC_DWL_REQ", + "NFC_IRQ", + "WCD_RST_N", + "ALS_PROX_INT_N", + "NC", /* GPIO_90 */ + "NC", + "TRAY_DET", + "UDON_SWITCH_SEL", + "PCIE0_RESET_N", + "PCIE0_CLK_REQ_N", + "PCIE0_WAKE_N", + "CAM_SOF", + "RF_ID_EXTENSION_2", + "RGBC_IR_INT", + "CAM_MCLK0", /* GPIO_100 */ + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "CAM_MCLK4", + "NC", + "CAM2_RESET_N", + "CCI_I2C0_SDA", + "CCI_I2C0_SCL", + "CCI_I2C1_SDA", + "CCI_I2C1_SCL", /* GPIO_110 */ + "CCI_I2C2_SDA", + "CCI_I2C2_SCL", + "CCI_I2C3_SDA", + "CCI_I2C3_SCL", + "NC", + "PM8008_1_IRQ", + "CAM3_RESET_N", + "IMU1_INT", + "EXT_VD0_XVS", + "NC", /* GPIO_120 */ + "NC", + "NC", + "NC", + "NC", + "HAP_I2S_CLK", + "HAP_I2S_DOUT", + "HAP_TRG1", + "HAP_I2S_SYNC", + "HST_BT_WLAN_SLIMBUS_CLK", + "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */ + "NC", + "UIM2_DETECT_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RESET", + "TRAY_DET", /* GPIO_140 */ + "SM_RFFE0_CLK", + "SM_RFFE0_DATA", + "SM_RFFE1_CLK", + "SM_RFFE1_DATA", + "SM_MSS_GRFC4", + "SM_MSS_GRFC5", + "SM_MSS_GRFC6", + "SM_MSS_GRFC7", + "SM_RFFE4_CLK", + "SM_RFFE4_DATA", /* GPIO_150 */ + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "HST_SW_CTRL", + "DISP_VDDR_EN", + "NC", + "NC", + "PA_INDICATOR_OR", + "TOF_RST_N", + "QLINK0_REQ", + "QLINK0_EN", /* GPIO_160 */ + "QLINK0_WMSS_RESET_N", + "QLINK1_REQ", + "QLINK1_EN", + "QLINK1_WMSS_RESET_N", + "PM8008_2_IRQ", + "TELEC_PWR_EN", + "PM8008_2_RESET_N", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", /* GPIO_170 */ + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + "SM_DMIC1_CLK", + "SM_DMIC1_DATA", + "SM_DMIC2_CLK", + "SM_DMIC2_DATA", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */ + "SPK_AMP_I2S_ASP_DOUT", + "WCD_SWR_TX_DATA2", + "NC", + "NC", + "NC", + "NC", + "IMU_SPI_MISO", + "IMU_SPI_MOSI", + "IMU_SPI_CLK", + "IMU_SPI_CS_N", /* GPIO_190 */ + "MAG_I2C_SDA", + "MAG_I2C_SCL", + "SENSOR_I2C_SDA", + "SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "HST_BLE_UART_TX", + "HST_BLE_UART_RX", /* GPIO_200 */ + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index b3c9952ac173..7ae1eb0a7cce 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -3,6 +3,8 @@ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> */ +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8350.dtsi" #include "pm8350.dtsi" #include "pm8350b.dtsi" @@ -47,7 +49,35 @@ gpio-keys { compatible = "gpio-keys"; - /* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */ + pinctrl-names = "default"; + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>; + + key-camera-focus { + label = "Camera Focus"; + linux,code = <KEY_CAMERA_FOCUS>; + gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + linux,code = <KEY_CAMERA>; + gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-google-assist { + label = "Google Assistant Key"; + gpios = <&pm8350_gpios 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LEFTMETA>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; key-vol-down { label = "Volume Down"; @@ -55,7 +85,7 @@ gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; @@ -73,16 +103,374 @@ no-map; }; }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; }; &adsp { status = "okay"; - firmware-name = "qcom/adsp.mbn"; + firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&pm8350_s11>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&pm8350_s11>; + + /* + * ARC regulators: + * S5 - mx.lvl + * S6 - gfx.lvl + * S9 - mxc.lvl + */ + + pm8350_s10: smps10 { + regulator-name = "pm8350_s10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_s11: smps11 { + regulator-name = "pm8350_s11"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_s12: smps12 { + regulator-name = "pm8350_s12"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1360000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l1: ldo1 { + regulator-name = "pm8350_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l2: ldo2 { + regulator-name = "pm8350_l2"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l3: ldo3 { + regulator-name = "pm8350_l3"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L4 - lmx.lvl (ARC) */ + + pm8350_l5: ldo5 { + regulator-name = "pm8350_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l6: ldo6 { + regulator-name = "pm8350_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l7: ldo7 { + regulator-name = "pm8350_l7"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + /* L8 - lcx.lvl (ARC) */ + + pm8350_l9: ldo9 { + regulator-name = "pm8350_l9"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&pm8350c_s1>; + vdd-l2-l8-supply = <&pm8350c_s1>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&pm8350_s12>; + + vdd-bob-supply = <&vph_pwr>; + + pm8350c_s1: smps1 { + regulator-name = "pm8350c_s1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* S2 - ebi.lvl (ARC) */ + + pm8350c_s3: smps3 { + regulator-name = "pm8350c_s3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* + * ARC regulators: + * S4 - mss.lvl + * S6 - cx.lvl + * S8 - mmcx.lvl + */ + + pm8350c_s10: smps10 { + regulator-name = "pm8350c_s10"; + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l1: ldo1 { + regulator-name = "pm8350c_l1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l2: ldo2 { + regulator-name = "pm8350c_l2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l3: ldo3 { + regulator-name = "pm8350c_l3"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l4: ldo4 { + regulator-name = "pm8350c_l4"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l5: ldo5 { + regulator-name = "pm8350c_l5"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l6: ldo6 { + regulator-name = "pm8350c_l6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l7: ldo7 { + regulator-name = "pm8350c_l7"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l8: ldo8 { + regulator-name = "pm8350c_l8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l9: ldo9 { + regulator-name = "pm8350c_l9"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l10: ldo10 { + regulator-name = "pm8350c_l10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l11: ldo11 { + regulator-name = "pm8350c_l11"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l12: ldo12 { + regulator-name = "pm8350c_l12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l13: ldo13 { + regulator-name = "pm8350c_l13"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + /* TODO: Add pm8350b (just one ldo) once the driver part is in */ + + regulators-2 { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&pmr735a_s2>; + vdd-l3-supply = <&pmr735a_s1>; + vdd-l4-supply = <&pm8350c_s1>; + vdd-l5-l6-supply = <&pm8350c_s1>; + vdd-l7-bob-supply = <&vreg_bob>; + + pmr735a_s1: smps1 { + regulator-name = "pmr735a_s1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1280000>; + }; + + pmr735a_s2: smps2 { + regulator-name = "pmr735a_s2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <976000>; + }; + + pmr735a_s3: smps3 { + regulator-name = "pmr735a_s3"; + regulator-min-microvolt = <2208000>; + regulator-max-microvolt = <2352000>; + }; + + pmr735a_l1: ldo1 { + regulator-name = "pmr735a_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + }; + + pmr735a_l2: ldo2 { + regulator-name = "pmr735a_l2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l3: ldo3 { + regulator-name = "pmr735a_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l4: ldo4 { + regulator-name = "pmr735a_l4"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1872000>; + }; + + pmr735a_l5: ldo5 { + regulator-name = "pmr735a_l5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pmr735a_l6: ldo6 { + regulator-name = "pmr735a_l6"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <904000>; + }; + + pmr735a_l7: ldo7 { + regulator-name = "pmr735a_l7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; }; &cdsp { status = "okay"; - firmware-name = "qcom/cdsp.mbn"; + firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn"; }; &i2c1 { @@ -92,13 +480,6 @@ /* Some subset of SONY IMX663 camera sensor @ 38 */ }; -&i2c2 { - status = "okay"; - clock-frequency = <400000>; - - /* Richwave RTC6226 FM Radio Receiver @ 64 */ -}; - &i2c4 { status = "okay"; clock-frequency = <400000>; @@ -110,7 +491,7 @@ status = "okay"; clock-frequency = <1000000>; - cs35l41_l: cs35l41@40 { + cs35l41_l: speaker-amp@40 { compatible = "cirrus,cs35l41"; reg = <0x40>; interrupt-parent = <&tlmm>; @@ -125,7 +506,7 @@ #sound-dai-cells = <1>; }; - cs35l41_r: cs35l41@41 { + cs35l41_r: speaker-amp@41 { compatible = "cirrus,cs35l41"; reg = <0x41>; interrupt-parent = <&tlmm>; @@ -155,7 +536,6 @@ clock-frequency = <100000>; /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */ - /* Dialog SLG51000 CMIC @ 75 */ }; &i2c15 { @@ -173,14 +553,69 @@ }; &ipa { - status = "okay"; + qcom,gsi-loader = "self"; memory-region = <&pil_ipa_fw_mem>; - firmware-name = "qcom/ipa_fws.mbn"; + firmware-name = "qcom/sm8350/Sony/sagami/ipa_fws.mbn"; + status = "okay"; }; &mpss { status = "okay"; - firmware-name = "qcom/modem.mbn"; + firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn"; +}; + +&pm8350_gpios { + gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */ + "LCD_ID", + "SDR_MMW_THERM", + "RF_ID", + "NC", + "FP_LDO_EN", + "SP_ARI_PWR_ALARM", + "NC", + "G_ASSIST_N", + "PM8350_OPTION"; /* GPIO_10 */ + + g_assist_n: g-assist-n-state { + pins = "gpio9"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8350b_gpios { + snapshot_n: snapshot-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio8"; + function = "normal"; + power-source = <0>; + input-enable; + bias-pull-up; + }; +}; + +&pmk8350_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "VOL_DOWN_N", + "PMK8350_OPTION"; + + vol_down_n: vol-down-n-state { + pins = "gpio3"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; }; &pmk8350_rtc { @@ -208,9 +643,21 @@ status = "okay"; }; +&sdhc_2 { + cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_active>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_sleep>; + vmmc-supply = <&pm8350c_l9>; + vqmmc-supply = <&pm8350c_l6>; + no-sdio; + no-mmc; + status = "okay"; +}; + &slpi { status = "okay"; - firmware-name = "qcom/slpi.mbn"; + firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn"; }; &spi14 { @@ -221,13 +668,229 @@ &tlmm { gpio-reserved-ranges = <44 4>; + gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */ + "APPS_I2C_0_SCL", + "UWIDEC_PWR_EN", + "HAP_RST_N", + "NC", + "NC", + "PM8008_1_RESET_N", + "NC", + "OIS_TELE_I2C_SDA", + "OIS_TELE_I2C_SCL", + "PM8350_OPTION", /* GPIO_10 */ + "NC", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "NC", + "NC", + "CAM1_RESET_N", + "LEO_CAM0_RESET_N", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "TS_I2C_SDA", /* GPIO_20 */ + "TS_I2C_SCL", + "TS_RESET_N", + "TS_INT_N", + "DISP_RESET_N", + "SW_SERVICE", + "DISP_ERR_FG", + "TX_GTR_THRES_IN", + "NC", + "NC", + "NC", /* GPIO_30 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "SPK_AMP_INT_N", + "SPK_AMP_RESET_N", + "FP_INT_N", + "FP_RESET_N", + "NC", /* GPIO_40 */ + "NC", + "DEBUG_GPIO0", + "FORCE_USB_BOOT", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_CLK", + "FP_SPI_CS_N", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", /* GPIO_50 */ + "HAP_INT_N", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "SBU_SW_OE", + "SBU_SW_SEL", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_CLK", + "NFC_ESE_SPI_CS", + "NFC_I2C_SDA", /* GPIO_60 */ + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "HST_WLAN_EN", + "HST_BT_EN", + "HW_ID_0", + "HW_ID_1", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", /* GPIO_70 */ + "HST_BT_UART_RX", + "HAP_I2C_SDA", + "HAP_I2C_SCL", + "RF_LCD_ID_EN", + "RF_ID_EXTENSION", + "NC", + "NC", + "NC", + "NC", + "HALL_INT_N", /* GPIO_80 */ + "USB_CC_DIR", + "DISP_VSYNC", + "NC", + "NC", + "CAM_SOF_TELE", + "NFC_DWL_REQ", + "NFC_IRQ", + "WCD_RST_N", + "ALS_PROX_INT_N", + "NC", /* GPIO_90 */ + "NC", + "TRAY_DET", + "UDON_SWITCH_SEL", + "PCIE0_RESET_N", + "PCIE0_CLK_REQ_N", + "PCIE0_WAKE_N", + "CAM_SOF", + "RF_ID_EXTENSION_2", + "RGBC_IR_INT", + "CAM_MCLK0", /* GPIO_100 */ + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "NC", + "NC", + "CAM2_RESET_N", + "CCI_I2C0_SDA", + "CCI_I2C0_SCL", + "CCI_I2C1_SDA", + "CCI_I2C1_SCL", /* GPIO_110 */ + "CCI_I2C2_SDA", + "CCI_I2C2_SCL", + "CCI_I2C3_SDA", + "CCI_I2C3_SCL", + "NC", + "PM8008_1_IRQ", + "CAM3_RESET_N", + "IMU1_INT", + "EXT_VD0_XVS", + "NC", /* GPIO_120 */ + "NC", + "NC", + "NC", + "NC", + "HAP_I2S_CLK", + "HAP_I2S_DOUT", + "HAP_TRG1", + "HAP_I2S_SYNC", + "HST_BT_WLAN_SLIMBUS_CLK", + "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */ + "NC", + "UIM2_DETECT_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RESET", + "TRAY_DET", /* GPIO_140 */ + "SM_RFFE0_CLK", + "SM_RFFE0_DATA", + "SM_RFFE1_CLK", + "SM_RFFE1_DATA", + "SM_MSS_GRFC4", + "SM_MSS_GRFC5", + "SM_MSS_GRFC6", + "SM_MSS_GRFC7", + "SM_RFFE4_CLK", + "SM_RFFE4_DATA", /* GPIO_150 */ + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "HST_SW_CTRL", + "DISP_VDDR_EN", + "NC", + "NC", + "PA_INDICATOR_OR", + "NC", + "QLINK0_REQ", + "QLINK0_EN", /* GPIO_160 */ + "QLINK0_WMSS_RESET_N", + "NC", + "NC", + "NC", + "PM8008_2_IRQ", + "TELEC_PWR_EN", + "PM8008_2_RESET_N", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", /* GPIO_170 */ + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + "SM_DMIC1_CLK", + "SM_DMIC1_DATA", + "SM_DMIC2_CLK", + "SM_DMIC2_DATA", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */ + "SPK_AMP_I2S_ASP_DOUT", + "WCD_SWR_TX_DATA2", + "NC", + "NC", + "NC", + "NC", + "IMU_SPI_MISO", + "IMU_SPI_MOSI", + "IMU_SPI_CLK", + "IMU_SPI_CS_N", /* GPIO_190 */ + "MAG_I2C_SDA", + "MAG_I2C_SCL", + "SENSOR_I2C_SDA", + "SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "HST_BLE_UART_TX", + "HST_BLE_UART_RX", /* GPIO_200 */ + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; ts_int_default: ts-int-default-state { pins = "gpio23"; function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; + }; + + sdc2_card_det_active: sd-card-det-active-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_card_det_sleep: sd-card-det-sleep-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; @@ -235,25 +898,25 @@ &ufs_mem_hc { status = "disabled"; }; &ufs_mem_phy { status = "disabled"; }; -/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */ &usb_1 { status = "okay"; - - qcom,select-utmi-as-pipe-clk; }; &usb_1_dwc3 { dr_mode = "peripheral"; - - maximum-speed = "high-speed"; - phys = <&usb_1_hsphy>; - phy-names = "usb2-phy"; }; &usb_1_hsphy { status = "okay"; + + vdda-pll-supply = <&pm8350_l5>; + vdda18-supply = <&pm8350c_l1>; + vdda33-supply = <&pm8350_l2>; }; &usb_1_qmpphy { status = "okay"; + + vdda-phy-supply = <&pm8350_l6>; + vdda-pll-supply = <&pm8350_l1>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index a86d9ea93b9d..3efdc03ed0f1 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -3,14 +3,17 @@ * Copyright (c) 2020, Linaro Limited */ +#include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,dispcc-sm8350.h> #include <dt-bindings/clock/qcom,gcc-sm8350.h> +#include <dt-bindings/clock/qcom,gpucc-sm8350.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> @@ -37,24 +40,6 @@ clock-frequency = <32000>; #clock-cells = <0>; }; - - ufs_phy_rx_symbol_0_clk: ufs-phy-rx-symbol-0 { - compatible = "fixed-clock"; - clock-frequency = <1000>; - #clock-cells = <0>; - }; - - ufs_phy_rx_symbol_1_clk: ufs-phy-rx-symbol-1 { - compatible = "fixed-clock"; - clock-frequency = <1000>; - #clock-cells = <0>; - }; - - ufs_phy_tx_symbol_0_clk: ufs-phy-tx-symbol-0 { - compatible = "fixed-clock"; - clock-frequency = <1000>; - #clock-cells = <0>; - }; }; cpus { @@ -65,6 +50,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -72,10 +58,14 @@ power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; L3_0: l3-cache { - compatible = "cache"; + compatible = "cache"; + cache-level = <3>; + cache-unified; }; }; }; @@ -84,6 +74,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -91,8 +82,10 @@ power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; }; @@ -100,6 +93,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -107,8 +101,10 @@ power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; }; @@ -116,6 +112,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -123,8 +120,10 @@ power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; }; @@ -132,6 +131,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -139,8 +139,10 @@ power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; }; @@ -148,6 +150,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -155,16 +158,18 @@ power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -172,8 +177,10 @@ power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; }; @@ -181,6 +188,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; @@ -188,8 +196,10 @@ power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; }; @@ -256,12 +266,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c344>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>; - local-timer-stop; }; }; }; @@ -288,55 +296,55 @@ compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD1: cpu1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD2: cpu2 { + CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD3: cpu3 { + CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD4: cpu4 { + CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD5: cpu5 { + CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD6: cpu6 { + CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD7: cpu7 { + CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CLUSTER_PD: cpu-cluster0 { + CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_SLEEP_0>; }; @@ -406,8 +414,10 @@ no-map; }; - smem_mem: memory@80900000 { + smem@80900000 { + compatible = "qcom,smem"; reg = <0x0 0x80900000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; no-map; }; @@ -516,12 +526,6 @@ }; }; - smem: qcom,smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; - }; - smp2p-adsp { compatible = "qcom,smp2p"; qcom,smem = <443>, <429>; @@ -656,15 +660,15 @@ "usb3_uni_phy_sec_gcc_usb30_pipe_clk"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>, <0>, <0>, <0>, - <0>, - <0>, - <&ufs_phy_rx_symbol_0_clk>, - <&ufs_phy_rx_symbol_1_clk>, - <&ufs_phy_tx_symbol_0_clk>, - <0>, + <&ufs_mem_phy_lanes 0>, + <&ufs_mem_phy_lanes 1>, + <&ufs_mem_phy_lanes 2>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>; }; @@ -678,7 +682,7 @@ }; gpi_dma2: dma-controller@800000 { - compatible = "qcom,sm8350-gpi-dma"; + compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00800000 0 0x60000>; interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, @@ -904,7 +908,7 @@ }; gpi_dma0: dma-controller@900000 { - compatible = "qcom,sm8350-gpi-dma"; + compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x09800000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, @@ -1043,8 +1047,6 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -1209,7 +1211,7 @@ }; gpi_dma1: dma-controller@a00000 { - compatible = "qcom,sm8350-gpi-dma"; + compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00a00000 0 0x60000>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, @@ -1435,165 +1437,302 @@ }; }; - apps_smmu: iommu@15000000 { - compatible = "qcom,sm8350-smmu-500", "arm,mmu-500"; - reg = <0 0x15000000 0 0x100000>; - #iommu-cells = <2>; - #global-interrupts = <2>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>; + rng: rng@10d3000 { + compatible = "qcom,prng-ee"; + reg = <0 0x010d3000 0 0x1000>; + clocks = <&rpmhcc RPMH_HWKM_CLK>; + clock-names = "core"; }; config_noc: interconnect@1500000 { compatible = "qcom,sm8350-config-noc"; reg = <0 0x01500000 0 0xa580>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@1580000 { compatible = "qcom,sm8350-mc-virt"; reg = <0 0x01580000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1680000 { compatible = "qcom,sm8350-system-noc"; reg = <0 0x01680000 0 0x1c200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sm8350-aggre1-noc"; reg = <0 0x016e0000 0 0x1f180>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1700000 { compatible = "qcom,sm8350-aggre2-noc"; reg = <0 0x01700000 0 0x33000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sm8350-mmss-noc"; reg = <0 0x01740000 0 0x1f080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; - lpass_ag_noc: interconnect@3c40000 { - compatible = "qcom,sm8350-lpass-ag-noc"; - reg = <0 0x03c40000 0 0xf080>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8350"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre1", + "aggre0"; + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + status = "disabled"; }; - compute_noc: interconnect@a0c0000{ - compatible = "qcom,sm8350-compute-noc"; - reg = <0 0x0a0c0000 0 0xa180>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8350-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x2000>; + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8350"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre1"; + + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0f000 { + compatible = "qcom,sm8350-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x2000>; + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8350-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + dma-coherent; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8350-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c4>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x188>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x188>, + <0 0x01d87a00 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; }; ipa: ipa@1e40000 { @@ -1601,9 +1740,9 @@ iommus = <&apps_smmu 0x5c0 0x0>, <&apps_smmu 0x5c2 0x0>; - reg = <0 0x1e40000 0 0x8000>, - <0 0x1e50000 0 0x4b20>, - <0 0x1e04000 0 0x23000>; + reg = <0 0x01e40000 0 0x8000>, + <0 0x01e50000 0 0x4b20>, + <0 0x01e04000 0 0x23000>; reg-names = "ipa-reg", "ipa-shared", "gsi"; @@ -1620,8 +1759,8 @@ clocks = <&rpmhcc RPMH_IPA_CLK>; clock-names = "core"; - interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>, - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; interconnect-names = "memory", "config"; @@ -1641,6 +1780,191 @@ #hwlock-cells = <1>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-660.1", "qcom,adreno"; + + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0x400>, <&adreno_smmu 1 0x400>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + status = "disabled"; + + zap-shader { + memory-region = <&pil_gpu_mem>; + }; + + /* note: downstream checks gpu binning for 670 Mhz */ + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-840000000 { + opp-hz = /bits/ 64 <840000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + + opp-778000000 { + opp-hz = /bits/ 64 <778000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-738000000 { + opp-hz = /bits/ 64 <738000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-676000000 { + opp-hz = /bits/ 64 <676000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-608000000 { + opp-hz = /bits/ 64 <608000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-491000000 { + opp-hz = /bits/ 64 <491000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + opp-443000000 { + opp-hz = /bits/ 64 <443000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-379000000 { + opp-hz = /bits/ 64 <379000000>; + opp-level = <80 /* RPMH_REGULATOR_LEVEL_LOW_SVS_L1 */>; + }; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-660.1", "qcom,adreno-gmu"; + + reg = <0 0x03d6a000 0 0x34000>, + <0 0x03de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", + "gx"; + + iommus = <&adreno_smmu 5 0x400>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8350-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "bus", + "iface", + "ahb", + "hlos1_vote_gpu_smmu", + "cx_gmu", + "hub_cx_int", + "hub_aon"; + + power-domains = <&gpucc GPU_CX_GDSC>; + dma-coherent; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sm8350-lpass-ag-noc"; + reg = <0 0x03c40000 0 0xf080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + mpss: remoteproc@4080000 { compatible = "qcom,sm8350-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; @@ -1661,7 +1985,7 @@ <&rpmhpd SM8350_MSS>; power-domain-names = "cx", "mss"; - interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; memory-region = <&pil_modem_mem>; @@ -1683,6 +2007,741 @@ }; }; + slpi: remoteproc@5c00000 { + compatible = "qcom,sm8350-slpi-pas"; + reg = <0 0x05c00000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8350_LCX>, + <&rpmhpd SM8350_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_slpi_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; + }; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + iommus = <&apps_smmu 0x4a0 0x0>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + dma-coherent; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8350-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e4000 { + compatible = "qcom,sm8250-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sm8350-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_2_qmpphy: phy-wrapper@88eb000 { + compatible = "qcom,sm8350-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: phy@88ebe00 { + reg = <0 0x088ebe00 0 0x200>, + <0 0x088ec000 0 0x200>, + <0 0x088eb200 0 0x1100>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + dc_noc: interconnect@90c0000 { + compatible = "qcom,sm8350-dc-noc"; + reg = <0 0x090c0000 0 0x4200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9100000 { + compatible = "qcom,sm8350-gem-noc"; + reg = <0 0x09100000 0 0xb4000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sm8350-llcc"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; + }; + + compute_noc: interconnect@a0c0000 { + compatible = "qcom,sm8350-compute-noc"; + reg = <0 0x0a0c0000 0 0xa180>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x20 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8350-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x402>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: opp-200000000 should work with + * &rpmhpd_opp_low_svs, but one some of + * sm8350_hdk boards reboot using this + * opp. + */ + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8350-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&dpu_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp_in>; + }; + }; + }; + }; + + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi0_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: opp-187500000 should work with + * &rpmhpd_opp_low_svs, but one some of + * sm8350_hdk boards reboot using this + * opp. + */ + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,sm8350-dsi-phy-5nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x27c>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&dsi1_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + phys = <&mdss_dsi1_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi1_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: opp-187500000 should work with + * &rpmhpd_opp_low_svs, but one some of + * sm8350_hdk boards reboot using this + * opp. + */ + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,sm8350-dsi-phy-5nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x27c>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8350-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + power-domains = <&rpmhpd SM8350_MMCX>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8350-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -1717,7 +2776,7 @@ #thermal-sensor-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP @@ -1734,11 +2793,11 @@ spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x0 0xc440000 0x0 0x1100>, - <0x0 0xc600000 0x0 0x2000000>, - <0x0 0xe600000 0x0 0x100000>, - <0x0 0xe700000 0x0 0xa0000>, - <0x0 0xc40a000 0x0 0x26000>; + reg = <0x0 0x0c440000 0x0 0x1100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x100000>, + <0x0 0x0e700000 0x0 0xa0000>, + <0x0 0x0c40a000 0x0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; @@ -1761,6 +2820,46 @@ gpio-ranges = <&tlmm 0 0 204>; wakeup-parent = <&pdc>; + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + qup_uart3_default_state: qup-uart3-default-state { rx-pins { pins = "gpio18"; @@ -1913,11 +3012,176 @@ }; }; - rng: rng@10d3000 { - compatible = "qcom,prng-ee"; - reg = <0 0x010d3000 0 0x1000>; - clocks = <&rpmhcc RPMH_HWKM_CLK>; - clock-names = "core"; + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8350-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>; + }; + + adsp: remoteproc@17300000 { + compatible = "qcom,sm8350-adsp-pas"; + reg = <0 0x17300000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8350_LCX>, + <&rpmhpd SM8350_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; + }; }; intc: interrupt-controller@17a00000 { @@ -2004,6 +3268,7 @@ qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; rpmhcc: clock-controller { compatible = "qcom,sm8350-rpmh-clk"; @@ -2078,150 +3343,12 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; - }; - - ufs_mem_hc: ufshc@1d84000 { - compatible = "qcom,sm8350-ufshc", "qcom,ufshc", - "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x3000>; - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; - phy-names = "ufsphy"; - lanes-per-direction = <2>; - #reset-cells = <1>; - resets = <&gcc GCC_UFS_PHY_BCR>; - reset-names = "rst"; - - power-domains = <&gcc UFS_PHY_GDSC>; - - iommus = <&apps_smmu 0xe0 0x0>; - - clock-names = - "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; - clocks = - <&gcc GCC_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_UFS_PHY_AHB_CLK>, - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - freq-table-hz = - <75000000 300000000>, - <0 0>, - <0 0>, - <75000000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; - status = "disabled"; - }; - - ufs_mem_phy: phy@1d87000 { - compatible = "qcom,sm8350-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clock-names = "ref", - "ref_aux"; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - status = "disabled"; - - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; - #phy-cells = <0>; - }; - }; - - slpi: remoteproc@5c00000 { - compatible = "qcom,sm8350-slpi-pas"; - reg = <0 0x05c00000 0 0x4000>; - - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, - <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd SM8350_LCX>, - <&rpmhpd SM8350_LMX>; - power-domain-names = "lcx", "lmx"; - - memory-region = <&pil_slpi_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_slpi_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_SLPI - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_SLPI - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "slpi"; - qcom,remote-pid = <3>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "sdsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@1 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - iommus = <&apps_smmu 0x0541 0x0>; - }; - - compute-cb@2 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <2>; - iommus = <&apps_smmu 0x0542 0x0>; - }; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x0543 0x0>; - /* note: shared-cb = <4> in downstream */ - }; - }; - }; + #clock-cells = <1>; }; cdsp: remoteproc@98900000 { compatible = "qcom,sm8350-cdsp-pas"; - reg = <0 0x098900000 0 0x1400000>; + reg = <0 0x98900000 0 0x1400000>; interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, @@ -2238,7 +3365,7 @@ <&rpmhpd SM8350_MXC>; power-domain-names = "cx", "mxc"; - interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>; + interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; memory-region = <&pil_cdsp_mem>; @@ -2327,305 +3454,6 @@ }; }; }; - - usb_1_hsphy: phy@88e3000 { - compatible = "qcom,sm8350-usb-hs-phy", - "qcom,usb-snps-hs-7nm-phy"; - reg = <0 0x088e3000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ref"; - - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - }; - - usb_2_hsphy: phy@88e4000 { - compatible = "qcom,sm8250-usb-hs-phy", - "qcom,usb-snps-hs-7nm-phy"; - reg = <0 0x088e4000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ref"; - - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; - }; - - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sm8350-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x20>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; - - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, - <&gcc GCC_USB3_PHY_PRIM_BCR>; - reset-names = "phy", "common"; - - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - }; - - usb_2_qmpphy: phy-wrapper@88eb000 { - compatible = "qcom,sm8350-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x200>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_SEC_CLKREF_EN>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; - - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; - - usb_2_ssphy: phy@88ebe00 { - reg = <0 0x088ebe00 0 0x200>, - <0 0x088ec000 0 0x200>, - <0 0x088eb200 0 0x1100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; - }; - - dc_noc: interconnect@90c0000 { - compatible = "qcom,sm8350-dc-noc"; - reg = <0 0x090c0000 0 0x4200>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - gem_noc: interconnect@9100000 { - compatible = "qcom,sm8350-gem-noc"; - reg = <0 0x09100000 0 0xb4000>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - system-cache-controller@9200000 { - compatible = "qcom,sm8350-llcc"; - reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; - }; - - usb_1: usb@a6f8800 { - compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; - reg = <0 0x0a6f8800 0 0x400>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi"; - - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; - - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", - "dm_hs_phy_irq", - "dp_hs_phy_irq"; - - power-domains = <&gcc USB30_PRIM_GDSC>; - - resets = <&gcc GCC_USB30_PRIM_BCR>; - - usb_1_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0 0x0a600000 0 0xcd00>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - iommus = <&apps_smmu 0x0 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; - - usb_2: usb@a8f8800 { - compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; - reg = <0 0x0a8f8800 0 0x400>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_SLEEP_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB3_SEC_CLKREF_EN>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi", - "xo"; - - assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SEC_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; - - interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 13 IRQ_TYPE_EDGE_BOTH>, - <&pdc 12 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", - "dm_hs_phy_irq", - "dp_hs_phy_irq"; - - power-domains = <&gcc USB30_SEC_GDSC>; - - resets = <&gcc GCC_USB30_SEC_BCR>; - - usb_2_dwc3: usb@a800000 { - compatible = "snps,dwc3"; - reg = <0 0x0a800000 0 0xcd00>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - iommus = <&apps_smmu 0x20 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; - - dispcc: clock-controller@af00000 { - compatible = "qcom,sm8350-dispcc"; - reg = <0 0x0af00000 0 0x10000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>; - clock-names = "bi_tcxo", - "dsi0_phy_pll_out_byteclk", - "dsi0_phy_pll_out_dsiclk", - "dsi1_phy_pll_out_byteclk", - "dsi1_phy_pll_out_dsiclk", - "dp_phy_pll_link_clk", - "dp_phy_pll_vco_div_clk"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - - power-domains = <&rpmhpd SM8350_MMCX>; - power-domain-names = "mmcx"; - }; - - adsp: remoteproc@17300000 { - compatible = "qcom,sm8350-adsp-pas"; - reg = <0 0x17300000 0 0x100>; - - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd SM8350_LCX>, - <&rpmhpd SM8350_LMX>; - power-domain-names = "lcx", "lmx"; - - memory-region = <&pil_adsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_adsp_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "lpass"; - qcom,remote-pid = <2>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "adsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1803 0x0>; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1804 0x0>; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x1805 0x0>; - }; - }; - }; - }; }; thermal_zones: thermal-zones { @@ -2648,7 +3476,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2692,7 +3520,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2736,7 +3564,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2780,7 +3608,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2824,7 +3652,7 @@ type = "passive"; }; - cpu4_top_crit: cpu_crit { + cpu4_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2868,7 +3696,7 @@ type = "passive"; }; - cpu5_top_crit: cpu_crit { + cpu5_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2912,7 +3740,7 @@ type = "passive"; }; - cpu6_top_crit: cpu_crit { + cpu6_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -2956,7 +3784,7 @@ type = "passive"; }; - cpu7_top_crit: cpu_crit { + cpu7_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3000,7 +3828,7 @@ type = "passive"; }; - cpu4_bottom_crit: cpu_crit { + cpu4_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3044,7 +3872,7 @@ type = "passive"; }; - cpu5_bottom_crit: cpu_crit { + cpu5_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3088,7 +3916,7 @@ type = "passive"; }; - cpu6_bottom_crit: cpu_crit { + cpu6_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3132,7 +3960,7 @@ type = "passive"; }; - cpu7_bottom_crit: cpu_crit { + cpu7_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 38ccd44620d0..e931545a2cac 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -6,7 +6,15 @@ /dts-v1/; #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> #include "sm8450.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pm8450.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8450 HDK"; @@ -16,10 +24,103 @@ serial0 = &uart7; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_s10b_1p8>; + vdd-rxtx-supply = <&vreg_s10b_1p8>; + vdd-io-supply = <&vreg_s10b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_out: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + lt9611_1v2: lt9611-vdd12-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + vin-supply = <&vph_pwr>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lt9611_3v3: lt9611-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vreg_bob>; + gpio = <&tlmm 109 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + }; + + pmic-glink { + compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -32,7 +133,7 @@ }; &apps_rsc { - pm8350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -123,7 +224,7 @@ }; }; - pm8350c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -236,7 +337,7 @@ }; }; - pm8450-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8450-rpmh-regulators"; qcom,pmic-id = "h"; @@ -276,10 +377,9 @@ regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - }; - pmr735a-rpmh-regulators { + regulators-3 { compatible = "qcom,pmr735a-rpmh-regulators"; qcom,pmic-id = "e"; @@ -349,6 +449,74 @@ }; }; +&dispcc { + status = "okay"; +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 44 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_connector_out>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l6b_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l5b_0p88>; + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + &pcie0 { status = "okay"; max-link-speed = <2>; @@ -394,8 +562,172 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_1p8>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&sound { + compatible = "qcom,sm8450-sndcard"; + model = "SM8450-HDK"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "TX DMIC0", "MIC BIAS1", + "TX DMIC1", "MIC BIAS2", + "TX DMIC2", "MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; +}; + +&swr0 { + status = "okay"; + + left_spkr: speaker@0,1 { + compatible = "sdw10217020200"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_1_sd_n_active>; + powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #thermal-sensor-cells = <0>; + vdd-supply = <&vreg_s10b_1p8>; + }; + + right_spkr: speaker@0,2 { + compatible = "sdw10217020200"; + reg = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_active>; + powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + #thermal-sensor-cells = <0>; + vdd-supply = <&vreg_s10b_1p8>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + &tlmm { gpio-reserved-ranges = <28 4>, <36 4>; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio44"; + function = "gpio"; + bias-disable; + }; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio107"; + function = "gpio"; + output-high; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart7 { @@ -425,7 +757,16 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { @@ -442,3 +783,38 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p91>; }; + +&vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic02_default>; + pinctrl-names = "default"; + vdd-micb-supply = <&vreg_s10b_1p8>; + qcom,dmic-sample-rate = <600000>; + + status = "okay"; +}; + +&tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio1"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio89"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio43"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index e58fc7399799..65a94dfaf5ae 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -7,6 +7,13 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8450.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pm8450.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8450 QRD"; @@ -32,7 +39,7 @@ }; &apps_rsc { - pm8350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; @@ -123,7 +130,7 @@ }; }; - pm8350c-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -235,7 +242,7 @@ }; }; - pm8450-rpmh-regulators { + regulators-2 { compatible = "qcom,pm8450-rpmh-regulators"; qcom,pmic-id = "h"; @@ -275,10 +282,9 @@ regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - }; - pmr735a-rpmh-regulators { + regulators-3 { compatible = "qcom,pmr735a-rpmh-regulators"; qcom,pmic-id = "e"; @@ -388,6 +394,18 @@ firmware-name = "qcom/sm8450/slpi.mbn"; }; +&sdhc_2 { + cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_1p8>; + no-sdio; + no-mmc; + status = "okay"; +}; + &spi4 { status = "okay"; }; @@ -402,6 +420,13 @@ &tlmm { gpio-reserved-ranges = <28 4>, <36 4>; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart7 { diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts index d68765eb6d4f..daf2f91f356e 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts @@ -1,634 +1,288 @@ // SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2022, Linaro Limited */ /dts-v1/; -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sm8450.dtsi" - -/delete-node/ &adsp_mem; -/delete-node/ &rmtfs_mem; -/delete-node/ &video_mem; +#include "sm8450-sony-xperia-nagara.dtsi" / { model = "Sony Xperia 1 IV"; compatible = "sony,pdx223", "qcom,sm8450"; - chassis-type = "handset"; - - aliases { - serial0 = &uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reserved-memory { - adsp_mem: memory@85700000 { - reg = <0x0 0x85700000 0x0 0x2800000>; - no-map; - }; - - video_mem: memory@9fd00000 { - reg = <0x0 0x9fd00000 0x0 0x700000>; - no-map; - }; - - rmtfs_mem: memory@f3300000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0 0xf3300000 0x0 0x280000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = <15>; - }; - ramoops@ffc00000 { - compatible = "ramoops"; - reg = <0 0xffc00000 0 0x200000>; - console-size = <0x40000>; - record-size = <0x1000>; - ecc-size = <16>; - no-map; - }; - }; - - /* Sadly, the voltages for these GPIO regulators are unknown. */ - imx650_vana_vreg: imx650-vana-regulator { + imx316_lvdd_regulator: imx316-lvdd-regulator { compatible = "regulator-fixed"; - regulator-name = "imx650_vana_vreg"; - gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; + regulator-name = "imx316_lvdd_regulator"; + gpio = <&pm8350b_gpios 6 GPIO_ACTIVE_HIGH>; enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&cam_pwr_ld_en>; }; - vph_pwr: vph-pwr-regulator { + tcs3490_vdd_regulator: rgbcir-vdd-regulator { compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; + regulator-name = "tcs3490_vdd_regulator"; + gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; - regulator-always-on; - regulator-boot-on; + pinctrl-names = "default"; + pinctrl-0 = <&rgbc_ir_pwr_en>; }; }; -&apps_rsc { - pm8350-rpmh-regulators { - compatible = "qcom,pm8350-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - vdd-s6-supply = <&vph_pwr>; - vdd-s7-supply = <&vph_pwr>; - vdd-s8-supply = <&vph_pwr>; - vdd-s9-supply = <&vph_pwr>; - vdd-s10-supply = <&vph_pwr>; - vdd-s11-supply = <&vph_pwr>; - vdd-s12-supply = <&vph_pwr>; - - vdd-l1-l4-supply = <&pm8350_s11>; - vdd-l2-l7-supply = <&vreg_bob>; - vdd-l3-l5-supply = <&vreg_bob>; - vdd-l6-l9-l10-supply = <&pm8350_s12>; - - /* - * ARC regulators: - * s5 - gfx.lvl - * l8 - lcx.lvl - */ - - pm8350_s10: smps10 { - regulator-name = "pm8350_s10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8350_s11: smps11 { - regulator-name = "pm8350_s11"; - regulator-min-microvolt = <848000>; - regulator-max-microvolt = <1104000>; - }; - - pm8350_s12: smps12 { - regulator-name = "pm8350_s12"; - regulator-min-microvolt = <1224000>; - regulator-max-microvolt = <1400000>; - }; - - pm8350_l1: ldo1 { - regulator-name = "pm8350_l1"; - regulator-min-microvolt = <912000>; - regulator-max-microvolt = <920000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350_l2: ldo2 { - regulator-name = "pm8350_l2"; - regulator-min-microvolt = <3072000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350_l3: ldo3 { - regulator-name = "pm8350_l3"; - regulator-min-microvolt = <904000>; - regulator-max-microvolt = <904000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350_l5: ldo5 { - regulator-name = "pm8350_l5"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350_l6: ldo6 { - regulator-name = "pm8350_l6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350_l7: ldo7 { - regulator-name = "pm8350_l7"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <2504000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350_l9: ldo9 { - regulator-name = "pm8350_l9"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - pm8350c-rpmh-regulators { - compatible = "qcom,pm8350c-rpmh-regulators"; - qcom,pmic-id = "c"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - vdd-s6-supply = <&vph_pwr>; - vdd-s7-supply = <&vph_pwr>; - vdd-s8-supply = <&vph_pwr>; - vdd-s9-supply = <&vph_pwr>; - vdd-s10-supply = <&vph_pwr>; - - vdd-l1-l12-supply = <&vreg_bob>; - vdd-l2-l8-supply = <&vreg_bob>; - vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; - vdd-l6-l9-l11-supply = <&vreg_bob>; - vdd-l10-supply = <&pm8350_s12>; - - vdd-bob-supply = <&vph_pwr>; - - /* - * ARC regulators: - * s2 - mxc.lvl - * s4 - mss.lvl - * s6 - cx.lvl - */ - - pm8350c_s1: smps1 { - regulator-name = "pm8350c_s1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2024000>; - }; - - pm8350c_s10: smps10 { - regulator-name = "pm8350c_s10"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1100000>; - }; - - vreg_bob: bob { - regulator-name = "vreg_bob"; - regulator-min-microvolt = <3400000>; - regulator-max-microvolt = <3960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; - }; - - pm8350c_l1: ldo1 { - regulator-name = "pm8350c_l1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350c_l2: ldo2 { - regulator-name = "pm8350c_l2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350c_l3: ldo3 { - regulator-name = "pm8350c_l3"; - regulator-min-microvolt = <3296000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350c_l4: ldo4 { - regulator-name = "pm8350c_l4"; - regulator-min-microvolt = <1704000>; - regulator-max-microvolt = <3000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350c_l5: ldo5 { - regulator-name = "pm8350c_l5"; - regulator-min-microvolt = <1704000>; - regulator-max-microvolt = <3000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350c_l6: ldo6 { - regulator-name = "pm8350c_l6"; - regulator-min-microvolt = <2960000>; - /* Originally max = 3008000 but SDHCI expects 2960000 */ - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350c_l7: ldo7 { - regulator-name = "pm8350c_l7"; - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350c_l8: ldo8 { - regulator-name = "pm8350c_l8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350c_l9: ldo9 { - regulator-name = "pm8350c_l9"; - regulator-min-microvolt = <2960000>; - /* Originally max = 3008000 but SDHCI expects 2960000 */ - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350c_l10: ldo10 { - regulator-name = "pm8350c_l10"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350c_l12: ldo12 { - regulator-name = "pm8350c_l12"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1968000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8350c_l13: ldo13 { - regulator-name = "pm8350c_l13"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - pm8450-rpmh-regulators { - compatible = "qcom,pm8450-rpmh-regulators"; - qcom,pmic-id = "h"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - vdd-s6-supply = <&vph_pwr>; - - vdd-l2-supply = <&vreg_bob>; - vdd-l3-supply = <&vreg_bob>; - vdd-l4-supply = <&vreg_bob>; - - /* - * ARC regulators: - * S2 - ebi.lvl - * S4 - mmcx.lvl - * S6 - mx.lvl - * L1 - lmx.lvl - */ - - pm8450_s3: smps3 { - regulator-name = "pm8450_s3"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <600000>; - }; - - pm8450_l2: ldo2 { - regulator-name = "pm8450_l2"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pm8450_l3: ldo3 { - regulator-name = "pm8450_l3"; - regulator-min-microvolt = <912000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - pmr735a-rpmh-regulators { - compatible = "qcom,pmr735a-rpmh-regulators"; - qcom,pmic-id = "e"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - - vdd-l1-l2-supply = <&pmr735a_s2>; - vdd-l3-supply = <&pmr735a_s1>; - vdd-l4-supply = <&pm8350c_s1>; - vdd-l5-l6-supply = <&pm8350c_s1>; - vdd-l7-bob-supply = <&vreg_bob>; - - pmr735a_s1: smps1 { - regulator-name = "pmr735a_s1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1296000>; - }; - - pmr735a_s2: smps2 { - regulator-name = "pmr735a_s2"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1040000>; - }; - - pmr735a_s3: smps3 { - regulator-name = "pmr735a_s3"; - regulator-min-microvolt = <435000>; - regulator-max-microvolt = <2352000>; - }; - - pmr735a_l1: ldo1 { - regulator-name = "pmr735a_l1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - - pmr735a_l2: ldo2 { - regulator-name = "pmr735a_l2"; - regulator-min-microvolt = <480000>; - regulator-max-microvolt = <912000>; - }; - - pmr735a_l3: ldo3 { - regulator-name = "pmr735a_l3"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pmr735a_l4: ldo4 { - regulator-name = "pmr735a_l4"; - regulator-min-microvolt = <1776000>; - regulator-max-microvolt = <1776000>; - }; - - pmr735a_l5: ldo5 { - regulator-name = "pmr735a_l5"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - }; - - pmr735a_l6: ldo6 { - regulator-name = "pmr735a_l6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pmr735a_l7: ldo7 { - regulator-name = "pmr735a_l7"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; +&pm8350b_gpios { + gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */ + "NC", + "NC", + "NC", + "SNAPSHOT_N", + "CAM_PWR_LD_EN", + "NC", + "FOCUS_N"; + + cam_pwr_ld_en: cam-pwr-ld-en-state { + pins = "gpio6"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <0>; + drive-push-pull; + output-low; }; }; -&gpi_dma0 { - status = "okay"; -}; - -&gpi_dma1 { - status = "okay"; -}; - -&gpi_dma2 { - status = "okay"; -}; - -/* I2C4 is used, it hosts a Samsung touchscreen, but GPI DMA is broken.. */ - -&i2c5 { - clock-frequency = <400000>; - status = "okay"; - - /* Dialog SLG51000 CMIC @ 75 */ -}; - -&i2c9 { - clock-frequency = <400000>; - status = "okay"; - - /* NXP SN1X0 NFC @ 28 */ -}; - -&i2c13 { - clock-frequency = <400000>; - status = "okay"; - - /* Richwave RTC6226 FM Radio Receiver @ 64 */ -}; - -&i2c14 { - clock-frequency = <1000000>; - status = "okay"; - - cs35l41_l: speaker-amp@40 { - compatible = "cirrus,cs35l41"; - reg = <0x40>; - interrupt-parent = <&tlmm>; - interrupts = <182 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; - cirrus,boost-peak-milliamp = <4000>; - cirrus,boost-ind-nanohenry = <1000>; - cirrus,boost-cap-microfarad = <15>; - cirrus,gpio2-src-select = <2>; - cirrus,gpio2-output-enable; - cirrus,asp-sdout-hiz = <3>; - #sound-dai-cells = <1>; - }; - - cs35l41_r: speaker-amp@41 { - compatible = "cirrus,cs35l41"; - reg = <0x41>; - interrupt-parent = <&tlmm>; - interrupts = <182 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; - cirrus,boost-peak-milliamp = <4000>; - cirrus,boost-ind-nanohenry = <1000>; - cirrus,boost-cap-microfarad = <15>; - cirrus,gpio2-src-select = <2>; - cirrus,gpio2-output-enable; - cirrus,asp-sdout-hiz = <3>; - #sound-dai-cells = <1>; +&pm8350c_gpios { + gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */ + "FL_STROBE_TRIG_TELE", + "WLC_ID", + "WLC_TXPWR_EN", + "NC", + "RGBC_IR_PWR_EN", + "NC", + "NC", + "WIDEC_PWR_EN"; + + rgbc_ir_pwr_en: rgbc-ir-pwr-en-state { + pins = "gpio6"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <1>; + drive-push-pull; + output-low; }; }; -&i2c15 { - clock-frequency = <400000>; - status = "okay"; - - /* AMS TCS3490 RGB+IR color sensor @ 72 */ -}; - -&i2c19 { - clock-frequency = <1000000>; - status = "okay"; - - /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ -}; - -&pcie0 { - max-link-speed = <2>; - status = "okay"; -}; - -&pcie0_phy { - vdda-phy-supply = <&pm8350_l5>; - vdda-pll-supply = <&pm8350_l6>; - status = "okay"; -}; - -&remoteproc_adsp { - firmware-name = "qcom/adsp.mbn"; - status = "okay"; -}; - -&remoteproc_cdsp { - firmware-name = "qcom/cdsp.mbn"; - status = "okay"; -}; - -&remoteproc_slpi { - firmware-name = "qcom/slpi.mbn"; - status = "okay"; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&qupv3_id_2 { - status = "okay"; -}; - -&sdhc_2 { - cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; - pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; - vmmc-supply = <&pm8350c_l9>; - vqmmc-supply = <&pm8350c_l6>; - /* Forbid SDR104/SDR50 - broken hw! */ - sdhci-caps-mask = <0x3 0x0>; - no-sdio; - no-mmc; - status = "okay"; -}; - -&spi10 { - status = "okay"; - - /* NXP SN1X0 NFC Secure Element @ 0 */ -}; - &tlmm { - gpio-reserved-ranges = <28 4>; - - sdc2_default_state: sdc2-default-state { - clk-pins { - pins = "sdc2_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-pins { - pins = "sdc2_cmd"; - drive-strength = <16>; - bias-pull-up; - }; - - data-pins { - pins = "sdc2_data"; - drive-strength = <16>; - bias-pull-up; - }; - }; - - ts_int_default: ts-int-default-state { - pins = "gpio23"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - input-enable; - }; - - sdc2_card_det_n: sd-card-det-n-state { - pins = "gpio92"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; -}; - -&uart7 { - status = "okay"; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "peripheral"; -}; - -&usb_1_hsphy { - vdda-pll-supply = <&pm8350_l5>; - vdda18-supply = <&pm8350c_l1>; - vdda33-supply = <&pm8350_l2>; - status = "okay"; -}; - -&usb_1_qmpphy { - vdda-phy-supply = <&pm8350_l6>; - vdda-pll-supply = <&pm8350_l1>; - status = "okay"; + gpio-line-names = "NC", /* GPIO_0 */ + "NC", + "NC", + "NC", + "WLC_I2C_SDA", + "WLC_I2C_SCL", + "NC", + "PM8010_1_RESET_N", + "WLC_INT_N", + "NC", + "NC", /* GPIO_10 */ + "PM8010_2_RESET_N", + "DISP_ERR_FG", + "HALL_INT_N", + "ALS_PROX_INT_N", + "IMU1_INT", + "TS_I2C_SDA", + "TS_I2C_SCL", + "DISP_RESET_N", + "DISP_VDDR_EN", + "TS_RESET_N", /* GPIO_20 */ + "TS_INT_N", + "NC", + "TELEC_PWR_EN", + "CAM1_RESET_N", + "LEO_CAM0_RESET_N", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_CLK", /* GPIO_30 */ + "FP_SPI_CS_N", + "NFC_I2C_SDA", + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_CLK", + "NFC_ESE_SPI_CS", + "FP_INT_N", /* GPIO_40 */ + "NC", + "FP_RESET_N", + "WCD_RST_N", + "NC", + "NFC_DWL_REQ", + "NFC_IRQ", + "FORCE_USB_BOOT", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "SBU_SW_OE", /* GPIO_50 */ + "SBU_SW_SEL", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "GNSS_ELNA_EN0", + "NC", + "NC", /* GPIO_60 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "RGBC_IR_INT", + "NC", + "NC", + "NC", + "NC", /* GPIO_70 */ + "NC", + "HAP_I2C_SDA", + "HAP_I2C_SCL", + "HAP_RST_N", + "HAP_INT_N", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", + "HST_BT_UART_RX", + "HST_WLAN_EN", /* GPIO_80 */ + "HST_BT_EN", + "HST_SW_CTRL", + "NC", + "NC", + "NC", + "DISP_VSYNC", + "NC", + "NC", + "HW_ID_0", + "HW_ID_1", /* GPIO_90 */ + "USB_CC_DIR", + "TRAY_DET", + "SW_SERVICE", + "PCIE0_RESET_N", + "PCIE0_CLK_REQ_N", + "PCIE0_WAKE_N", + "OIS_ENABLE_WIDE", + "DEBUG_GPIO0", + "NC", + "CAM_MCLK0", /* GPIO_100 */ + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "NC", + "NC", + "TOF_RST_N", + "CAM_SOF", + "NC", + "AFEXPTMG_TELE", + "CCI_I2C0_SDA", /* GPIO_110 */ + "CCI_I2C0_SCL", + "CCI_I2C1_SDA", + "CCI_I2C1_SCL", + "CCI_I2C2_SDA", + "CCI_I2C2_SCL", + "NC", + "CAM2_RESET_N", + "NC", + "EXT_VD0_XVS", + "CAM3_RESET_N", /* GPIO_120 */ + "NC", + "NC", + "NC", + "NC", + "RF_ID_EXTENSION_2", + "HAP_I2S_CLK", + "HAP_I2S_DOUT", + "HAP_TRG1", + "HAP_I2S_SYNC", + "UIM1_DATA", /* GPIO_130 */ + "UIM1_CLK", + "UIM1_RESET", + "TRAY_DET", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "SM_RFFE0_CLK", + "SM_RFFE0_DATA", + "SM_RFFE1_CLK", /* GPIO_140 */ + "SM_RFFE1_DATA", + "SM_MSS_GRFC4", + "HST_AS_EN", + "LAA_RX_EN", + "NC", + "SM_RFFE4_CLK", + "SM_RFFE4_DATA", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "RF_LCD_ID_EN", /* GPIO_150 */ + "RF_ID_EXTENSION", + "SM_MSS_GRFC12", + "NFC_COLD_RST", + "NC", + "NC", + "SDR1_QLINK0_REQ", + "SDR1_QLINK0_EN", + "SDR1_QLINK0_WMSS_RESET_N", + "QLINK1_REQ", + "QLINK1_EN", /* GPIO_160 */ + "QLINK1_WMSS_RESET_N", + "SDR2_QLINK2_REQ", + "SDR2_QLINK2_EN", + "SDR2_QLINK2_WMSS_RESET_N", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", /* GPIO_170 */ + "SM_DMIC1_CLK", + "SM_DMIC1_DATA", + "SM_DMIC2_CLK", + "SM_DMIC2_DATA", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "NC", + "NC", + "WCD_SWR_TX_DATA2", + "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */ + "SPK_AMP_I2S_ASP_DOUT", + "SPK_AMP_INT_N", + "SPK_AMP_RESET_N", + "HST_BT_WLAN_SLIMBUS_CLK", + "HST_BT_WLAN_SLIMBUS_DAT0", + "NC", + "NC", + "NC", + "NC", + "MAG_I2C_SDA", /* GPIO_190 */ + "MAG_I2C_SCL", + "IMU_SPI_MISO", + "IMU_SPI_MOSI", + "IMU_SPI_CLK", + "IMU_SPI_CS_N", + "SENSOR_I2C_SDA", + "SENSOR_I2C_SCL", + "OIS_TELE_I2C_SDA", + "OIS_TELE_I2C_SCL", + "NC", /* GPIO_200 */ + "OIS_ENABLE_TELE", + "HST_BLE_UART_TX", + "HST_BLE_UART_RX", + "HSTP_CLK_CFG_SEL", + "NC", + "APPS_I2C_0_SDA", + "APPS_I2C_0_SCL", + "CCI_I2C3_SDA", + "CCI_I2C3_SCL"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts new file mode 100644 index 000000000000..dc4de2d3fe48 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts @@ -0,0 +1,268 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include "sm8450-sony-xperia-nagara.dtsi" + +/ { + model = "Sony Xperia 5 IV"; + compatible = "sony,pdx224", "qcom,sm8450"; + + imx563_vdig_regulator: imx563-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "imx563_vdig_regulator"; + gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&uwidec_pwr_en>; + }; +}; + +&pm8350b_gpios { + gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */ + "NC", + "NC", + "NC", + "SNAPSHOT_N", + "NC", + "NC", + "FOCUS_N"; +}; + +&pm8350c_gpios { + gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */ + "FL_STROBE_TRIG_TELE", + "WLC_ID", + "WLC_TXPWR_EN", + "NC", + "NC", /* RGBCIR uses a PMIC vreg, so it's most likely NC. */ + "NC", + "NC", + "WIDEC_PWR_EN"; +}; + +&tlmm { + gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */ + "TELE_SPI_MOSI", /* SONY says NC, but it only makes sense this way.. */ + "TELE_SPI_CLK", + "TELE_SPI_CS_N", + "WLC_I2C_SDA", + "WLC_I2C_SCL", + "NC", + "PM8010_1_RESET_N", + "WLC_INT_N", + "NC", + "NC", /* GPIO_10 */ + "NC", + "DISP_ERR_FG", + "HALL_INT_N", + "ALS_PROX_INT_N", + "IMU1_INT", + "TS_I2C_SDA", + "TS_I2C_SCL", + "DISP_RESET_N", + "DISP_VDDR_EN", + "TS_RESET_N", /* GPIO_20 */ + "TS_INT_N", + "UWIDEC_PWR_EN", + "TELEC_PWR_EN", + "CAM1_RESET_N", + "LEO_CAM0_RESET_N", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_CLK", /* GPIO_30 */ + "FP_SPI_CS_N", + "NFC_I2C_SDA", + "NFC_I2C_SCL", + "NFC_EN", + "NFC_CLK_REQ", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_CLK", + "NFC_ESE_SPI_CS", + "FP_INT_N", /* GPIO_40 */ + "NC", + "FP_RESET_N", + "WCD_RST_N", + "NC", + "NFC_DWL_REQ", + "NFC_IRQ", + "FORCE_USB_BOOT", + "APPS_I2C_1_SDA", + "APPS_I2C_1_SCL", + "SBU_SW_OE", /* GPIO_50 */ + "SBU_SW_SEL", + "SPK_AMP_I2C_SDA", + "SPK_AMP_I2C_SCL", + "NC", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "GNSS_ELNA_EN0", + "NC", + "NC", /* GPIO_60 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "RGBC_IR_INT", + "NC", + "NC", + "NC", + "NC", /* GPIO_70 */ + "NC", + "HAP_I2C_SDA", + "HAP_I2C_SCL", + "HAP_RST_N", + "HAP_INT_N", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", + "HST_BT_UART_RX", + "HST_WLAN_EN", /* GPIO_80 */ + "HST_BT_EN", + "HST_SW_CTRL", + "NC", + "NC", + "NC", + "DISP_VSYNC", + "NC", + "NC", + "HW_ID_0", + "HW_ID_1", /* GPIO_90 */ + "USB_CC_DIR", + "TRAY_DET", + "SW_SERVICE", + "PCIE0_RESET_N", + "PCIE0_CLK_REQ_N", + "PCIE0_WAKE_N", + "OIS_ENABLE_WIDE", + "DEBUG_GPIO0", + "NC", + "CAM_MCLK0", /* GPIO_100 */ + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "NC", + "NC", + "NC", /* SONY didn't rename this, but there's no ToF so it's likely NC */ + "CAM_SOF", + "NC", + "AFEXPTMG_TELE", + "CCI_I2C0_SDA", /* GPIO_110 */ + "CCI_I2C0_SCL", + "CCI_I2C1_SDA", + "CCI_I2C1_SCL", + "CCI_I2C2_SDA", + "CCI_I2C2_SCL", + "NC", + "CAM2_RESET_N", + "NC", + "EXT_VD0_XVS", + "CAM3_RESET_N", /* GPIO_120 */ + "NC", + "NC", + "NC", + "NC", + "RF_ID_EXTENSION_2", + "HAP_I2S_CLK", + "HAP_I2S_DOUT", + "HAP_TRG1", + "HAP_I2S_SYNC", + "UIM1_DATA", /* GPIO_130 */ + "UIM1_CLK", + "UIM1_RESET", + "TRAY_DET", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "SM_RFFE0_CLK", + "SM_RFFE0_DATA", + "SM_RFFE1_CLK", /* GPIO_140 */ + "SM_RFFE1_DATA", + "SM_MSS_GRFC4", + "HST_AS_EN", + "LAA_RX_EN", + "NC", + "SM_RFFE4_CLK", + "SM_RFFE4_DATA", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "RF_LCD_ID_EN", /* GPIO_150 */ + "RF_ID_EXTENSION", + "SM_MSS_GRFC12", + "NFC_COLD_RST", + "NC", + "NC", + "SDR1_QLINK0_REQ", + "SDR1_QLINK0_EN", + "SDR1_QLINK0_WMSS_RESET_N", + "NC", + "NC", /* GPIO_160 */ + "NC", + "SDR2_QLINK2_REQ", + "SDR2_QLINK2_EN", + "SDR2_QLINK2_WMSS_RESET_N", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", /* GPIO_170 */ + "SM_DMIC1_CLK", + "SM_DMIC1_DATA", + "SM_DMIC2_CLK", + "SM_DMIC2_DATA", + "SPK_AMP_I2S_CLK", + "SPK_AMP_I2S_WS", + "NC", + "NC", + "WCD_SWR_TX_DATA2", + "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */ + "SPK_AMP_I2S_ASP_DOUT", + "SPK_AMP_INT_N", + "SPK_AMP_RESET_N", + "HST_BT_WLAN_SLIMBUS_CLK", + "HST_BT_WLAN_SLIMBUS_DAT0", + "NC", + "NC", + "NC", + "NC", + "MAG_I2C_SDA", /* GPIO_190 */ + "MAG_I2C_SCL", + "IMU_SPI_MISO", + "IMU_SPI_MOSI", + "IMU_SPI_CLK", + "IMU_SPI_CS_N", + "SENSOR_I2C_SDA", + "SENSOR_I2C_SCL", + "OIS_TELE_I2C_SDA", + "OIS_TELE_I2C_SCL", + "NC", /* GPIO_200 */ + "OIS_ENABLE_TELE", + "HST_BLE_UART_TX", + "HST_BLE_UART_RX", + "HSTP_CLK_CFG_SEL", + "NC", + "APPS_I2C_0_SDA", + "APPS_I2C_0_SCL", + "CCI_I2C3_SDA", + "CCI_I2C3_SCL"; + + uwidec_pwr_en: uwidec-pwr-en-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi new file mode 100644 index 000000000000..001fb2723fbb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi @@ -0,0 +1,798 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8450.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pm8450.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; + +/ { + chassis-type = "handset"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; + + key-camera-focus { + label = "Camera Focus"; + linux,code = <KEY_CAMERA_FOCUS>; + gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + linux,code = <KEY_CAMERA>; + gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + reserved-memory { + adsp_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x2800000>; + no-map; + }; + + video_mem: memory@9fd00000 { + reg = <0x0 0x9fd00000 0x0 0x700000>; + no-map; + }; + + rmtfs_mem: memory@f3300000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf3300000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0 0xffc00000 0 0x200000>; + console-size = <0x40000>; + record-size = <0x1000>; + ecc-size = <16>; + no-map; + }; + }; + + /* Sadly, the voltages for these GPIO regulators are unknown. */ + imx650_vana_regulator: imx650-vana-regulator { + compatible = "regulator-fixed"; + regulator-name = "imx650_vana_regulator"; + gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&telec_pwr_en>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&pm8350_s11>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&pm8350_s12>; + + /* + * ARC regulators: + * s5 - gfx.lvl + * l8 - lcx.lvl + */ + + pm8350_s10: smps10 { + regulator-name = "pm8350_s10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8350_s11: smps11 { + regulator-name = "pm8350_s11"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + pm8350_s12: smps12 { + regulator-name = "pm8350_s12"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1400000>; + }; + + pm8350_l1: ldo1 { + regulator-name = "pm8350_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l2: ldo2 { + regulator-name = "pm8350_l2"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l3: ldo3 { + regulator-name = "pm8350_l3"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l5: ldo5 { + regulator-name = "pm8350_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l6: ldo6 { + regulator-name = "pm8350_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l7: ldo7 { + regulator-name = "pm8350_l7"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l9: ldo9 { + regulator-name = "pm8350_l9"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&pm8350_s12>; + + vdd-bob-supply = <&vph_pwr>; + + /* + * ARC regulators: + * s2 - mxc.lvl + * s4 - mss.lvl + * s6 - cx.lvl + */ + + pm8350c_s1: smps1 { + regulator-name = "pm8350c_s1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + pm8350c_s10: smps10 { + regulator-name = "pm8350c_s10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + pm8350c_l1: ldo1 { + regulator-name = "pm8350c_l1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l2: ldo2 { + regulator-name = "pm8350c_l2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l3: ldo3 { + regulator-name = "pm8350c_l3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l4: ldo4 { + regulator-name = "pm8350c_l4"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l5: ldo5 { + regulator-name = "pm8350c_l5"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l6: ldo6 { + regulator-name = "pm8350c_l6"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l7: ldo7 { + regulator-name = "pm8350c_l7"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l8: ldo8 { + regulator-name = "pm8350c_l8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l9: ldo9 { + regulator-name = "pm8350c_l9"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l10: ldo10 { + regulator-name = "pm8350c_l10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l12: ldo12 { + regulator-name = "pm8350c_l12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l13: ldo13 { + regulator-name = "pm8350c_l13"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + /* + * ARC regulators: + * S2 - ebi.lvl + * S4 - mmcx.lvl + * S6 - mx.lvl + * L1 - lmx.lvl + */ + + pm8450_s3: smps3 { + regulator-name = "pm8450_s3"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <600000>; + }; + + pm8450_l2: ldo2 { + regulator-name = "pm8450_l2"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8450_l3: ldo3 { + regulator-name = "pm8450_l3"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&pmr735a_s2>; + vdd-l3-supply = <&pmr735a_s1>; + vdd-l4-supply = <&pm8350c_s1>; + vdd-l5-l6-supply = <&pm8350c_s1>; + vdd-l7-bob-supply = <&vreg_bob>; + + pmr735a_s1: smps1 { + regulator-name = "pmr735a_s1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + pmr735a_s2: smps2 { + regulator-name = "pmr735a_s2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + pmr735a_s3: smps3 { + regulator-name = "pmr735a_s3"; + regulator-min-microvolt = <435000>; + regulator-max-microvolt = <2352000>; + }; + + pmr735a_l1: ldo1 { + regulator-name = "pmr735a_l1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pmr735a_l2: ldo2 { + regulator-name = "pmr735a_l2"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <912000>; + }; + + pmr735a_l3: ldo3 { + regulator-name = "pmr735a_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l4: ldo4 { + regulator-name = "pmr735a_l4"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + pmr735a_l5: ldo5 { + regulator-name = "pmr735a_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + pmr735a_l6: ldo6 { + regulator-name = "pmr735a_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l7: ldo7 { + regulator-name = "pmr735a_l7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <21 0x2008>; + vdd-supply = <&pm8350c_l2>; + avdd-supply = <&pm8350c_l3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_reset_default &ts_int_default>; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + pmic@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&cam_pwr_a_cs>; + + regulators { + slg51000_a_ldo1: ldo1 { + regulator-name = "slg51000_a_ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_a_ldo2: ldo2 { + regulator-name = "slg51000_a_ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_a_ldo3: ldo3 { + regulator-name = "slg51000_a_ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_a_ldo4: ldo4 { + regulator-name = "slg51000_a_ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_a_ldo5: ldo5 { + regulator-name = "slg51000_a_ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_a_ldo6: ldo6 { + regulator-name = "slg51000_a_ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_a_ldo7: ldo7 { + regulator-name = "slg51000_a_ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + /* NXP SN1X0 NFC @ 28 */ +}; + +&i2c14 { + clock-frequency = <1000000>; + status = "okay"; + + cs35l41_l: speaker-amp@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; + + cs35l41_r: speaker-amp@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; +}; + +&i2c15 { + clock-frequency = <400000>; + status = "okay"; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c19 { + clock-frequency = <1000000>; + status = "okay"; + + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ +}; + +&pcie0 { + max-link-speed = <2>; + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&pm8350_l5>; + vdda-pll-supply = <&pm8350_l6>; + status = "okay"; +}; + +&pm8350_gpios { + gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */ + "LCD_ID", + "SDR_MMW_THERM", + "RF_ID", + "NC", + "VOL_DOWN_N", + "NC", + "NC", + "NC", + "PM8350_OPTION"; /* GPIO_10 */ + + vol_down_n: vol-down-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8350b_gpios { + cam_pwr_a_cs: cam-pwr-a-cs-state { + pins = "gpio1"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <1>; + drive-push-pull; + output-high; + }; + + snapshot_n: snapshot-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio8"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pm8450_gpios { + gpio-line-names = "FP_LDO_EN", /* GPIO_1 */ + "", + "", + ""; +}; + +&pmk8350_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "DISP_THERM", + "PMK8350_OPTION"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8450/Sony/nagara/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8450/Sony/nagara/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_slpi { + firmware-name = "qcom/sm8450/Sony/nagara/slpi.mbn"; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; + vmmc-supply = <&pm8350c_l9>; + vqmmc-supply = <&pm8350c_l6>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&spi10 { + status = "okay"; + + /* NXP SN1X0 NFC Secure Element @ 0 */ +}; + +&tlmm { + gpio-reserved-ranges = <28 4>; + + ts_reset_default: ts-reset-default-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + telec_pwr_en: telec-pwr-en-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&pm8350_l5>; + vdda18-supply = <&pm8350c_l1>; + vdda33-supply = <&pm8350_l2>; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&pm8350_l6>; + vdda-pll-supply = <&pm8350_l1>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index d32f08df743d..d59ea8ee7111 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -7,12 +7,16 @@ #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm8450-camcc.h> +#include <dt-bindings/clock/qcom,sm8450-dispcc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/interconnect/qcom,sm8450.h> +#include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> #include <dt-bindings/thermal/thermal.h> / { @@ -51,11 +55,16 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; L2_0: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; L3_0: l3-cache { - compatible = "cache"; + compatible = "cache"; + cache-level = <3>; + cache-unified; }; }; }; @@ -70,9 +79,12 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; L2_100: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; }; @@ -86,9 +98,12 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; L2_200: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; }; @@ -102,9 +117,12 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; + clocks = <&cpufreq_hw 0>; L2_300: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; }; @@ -118,9 +136,12 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; L2_400: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; }; @@ -134,11 +155,13 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; L2_500: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { @@ -151,9 +174,12 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; + clocks = <&cpufreq_hw 1>; L2_600: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; }; @@ -167,9 +193,12 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 2>; #cooling-cells = <2>; + clocks = <&cpufreq_hw 2>; L2_700: l2-cache { - compatible = "cache"; - next-level-cache = <&L3_0>; + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; }; }; @@ -236,22 +265,18 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-l3-off"; arm,psci-suspend-param = <0x41000044>; entry-latency-us = <1050>; exit-latency-us = <2500>; min-residency-us = <5309>; - local-timer-stop; }; CLUSTER_SLEEP_1: cluster-sleep-1 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c344>; entry-latency-us = <2700>; exit-latency-us = <3500>; min-residency-us = <13959>; - local-timer-stop; }; }; }; @@ -259,6 +284,7 @@ firmware { scm: scm { compatible = "qcom,scm-sm8450", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x13000>; interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; #reset-cells = <1>; }; @@ -291,55 +317,55 @@ compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu0 { + CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD1: cpu1 { + CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD2: cpu2 { + CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD3: cpu3 { + CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&LITTLE_CPU_SLEEP_0>; }; - CPU_PD4: cpu4 { + CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD5: cpu5 { + CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD6: cpu6 { + CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CPU_PD7: cpu7 { + CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&BIG_CPU_SLEEP_0>; }; - CLUSTER_PD: cpu-cluster0 { + CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>; }; @@ -720,19 +746,29 @@ #reset-cells = <1>; #power-domain-cells = <1>; clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, <&pcie0_lane>, <&pcie1_lane>, - <&sleep_clk>; + <0>, + <&ufs_mem_phy_lanes 0>, + <&ufs_mem_phy_lanes 1>, + <&ufs_mem_phy_lanes 2>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; clock-names = "bi_tcxo", + "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk", - "sleep_clk"; + "pcie_1_phy_aux_clk", + "ufs_phy_rx_symbol_0_clk", + "ufs_phy_rx_symbol_1_clk", + "ufs_phy_tx_symbol_0_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; }; gpi_dma2: dma-controller@800000 { - compatible = "qcom,sm8450-gpi-dma"; + compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; #dma-cells = <3>; - reg = <0 0x800000 0 0x60000>; + reg = <0 0x00800000 0 0x60000>; interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, @@ -791,7 +827,6 @@ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -831,7 +866,6 @@ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -871,7 +905,6 @@ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -911,7 +944,6 @@ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -951,7 +983,6 @@ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -991,8 +1022,6 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart20_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -1004,7 +1033,6 @@ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -1044,7 +1072,6 @@ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; - spi-max-frequency = <50000000>; interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; interconnect-names = "qup-core", "qup-config"; @@ -1058,9 +1085,9 @@ }; gpi_dma0: dma-controller@900000 { - compatible = "qcom,sm8450-gpi-dma"; + compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; #dma-cells = <3>; - reg = <0 0x900000 0 0x60000>; + reg = <0 0x00900000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, @@ -1341,7 +1368,7 @@ i2c6: i2c@998000 { compatible = "qcom,geni-i2c"; - reg = <0x0 0x998000 0x0 0x4000>; + reg = <0x0 0x00998000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; @@ -1361,7 +1388,7 @@ spi6: spi@998000 { compatible = "qcom,geni-spi"; - reg = <0x0 0x998000 0x0 0x4000>; + reg = <0x0 0x00998000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; @@ -1387,16 +1414,14 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; }; gpi_dma1: dma-controller@a00000 { - compatible = "qcom,sm8450-gpi-dma"; + compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma"; #dma-cells = <3>; - reg = <0 0xa00000 0 0x60000>; + reg = <0 0x00a00000 0 0x60000>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, @@ -1726,9 +1751,16 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + /* + * MSIs for BDF (1:0.0) only works with Device ID 0x5980. + * Hence, the IDs are swapped. + */ + msi-map = <0x0 &gic_its 0x5981 0x1>, + <0x100 &gic_its 0x5980 0x1>; + msi-map-mask = <0xff00>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -1763,7 +1795,6 @@ "aggre0", "aggre1"; - iommus = <&apps_smmu 0x1c00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; @@ -1771,7 +1802,6 @@ reset-names = "pci"; power-domains = <&gcc PCIE_0_GDSC>; - power-domain-names = "gdsc"; phys = <&pcie0_lane>; phy-names = "pciephy"; @@ -1806,10 +1836,10 @@ status = "disabled"; pcie0_lane: phy@1c06200 { - reg = <0 0x1c06e00 0 0x200>, /* tx */ - <0 0x1c07000 0 0x200>, /* rx */ - <0 0x1c06200 0 0x200>, /* pcs */ - <0 0x1c06600 0 0x200>; /* pcs_pcie */ + reg = <0 0x01c06e00 0 0x200>, /* tx */ + <0 0x01c07000 0 0x200>, /* rx */ + <0 0x01c06200 0 0x200>, /* pcs */ + <0 0x01c06600 0 0x200>; /* pcs_pcie */ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; @@ -1835,9 +1865,16 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + /* + * MSIs for BDF (1:0.0) only works with Device ID 0x5a00. + * Hence, the IDs are swapped. + */ + msi-map = <0x0 &gic_its 0x5a01 0x1>, + <0x100 &gic_its 0x5a00 0x1>; + msi-map-mask = <0xff00>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -1870,7 +1907,6 @@ "ddrss_sf_tbu", "aggre1"; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -1878,13 +1914,12 @@ reset-names = "pci"; power-domains = <&gcc PCIE_1_GDSC>; - power-domain-names = "gdsc"; phys = <&pcie1_lane>; phy-names = "pciephy"; - perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>; - enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; @@ -1913,12 +1948,12 @@ status = "disabled"; pcie1_lane: phy@1c0e000 { - reg = <0 0x1c0e000 0 0x200>, /* tx */ - <0 0x1c0e200 0 0x300>, /* rx */ - <0 0x1c0f200 0 0x200>, /* pcs */ - <0 0x1c0e800 0 0x200>, /* tx */ - <0 0x1c0ea00 0 0x300>, /* rx */ - <0 0x1c0f400 0 0xc00>; /* pcs_pcie */ + reg = <0 0x01c0e000 0 0x200>, /* tx */ + <0 0x01c0e200 0 0x300>, /* rx */ + <0 0x01c0f200 0 0x200>, /* pcs */ + <0 0x01c0e800 0 0x200>, /* tx */ + <0 0x01c0ea00 0 0x300>, /* rx */ + <0 0x01c0f400 0 0xc00>; /* pcs_pcie */ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "pipe0"; @@ -1982,6 +2017,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sm8450-tcsr", "syscon"; + reg = <0x0 0x1fc0000 0x0 0x30000>; + }; + usb_1_hsphy: phy@88e3000 { compatible = "qcom,sm8450-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; @@ -1995,37 +2035,24 @@ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sm8450-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x20>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sm8450-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; }; remoteproc_slpi: remoteproc@2400000 { @@ -2095,9 +2122,217 @@ }; }; + wsa2macro: codec@31e0000 { + compatible = "qcom,sm8450-lpass-wsa-macro"; + reg = <0 0x031e0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + + #clock-cells = <0>; + clock-output-names = "wsa2-mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&wsa2_swr_active>; + #sound-dai-cells = <1>; + }; + + swr4: soundwire-controller@31f0000 { + compatible = "qcom,soundwire-v1.7.0"; + reg = <0 0x031f0000 0 0x2000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wsa2macro>; + clock-names = "iface"; + label = "WSA2"; + + qcom,din-ports = <2>; + qcom,dout-ports = <6>; + + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + rxmacro: codec@3200000 { + compatible = "qcom,sm8450-lpass-rx-macro"; + reg = <0 0x03200000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&rx_swr_active>; + #sound-dai-cells = <1>; + }; + + swr1: soundwire-controller@3210000 { + compatible = "qcom,soundwire-v1.7.0"; + reg = <0 0x03210000 0 0x2000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rxmacro>; + clock-names = "iface"; + label = "RX"; + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + txmacro: codec@3220000 { + compatible = "qcom,sm8450-lpass-tx-macro"; + reg = <0 0x03220000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&tx_swr_active>; + #sound-dai-cells = <1>; + }; + + wsamacro: codec@3240000 { + compatible = "qcom,sm8450-lpass-wsa-macro"; + reg = <0 0x03240000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&vamacro>; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>, <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_active>; + #sound-dai-cells = <1>; + }; + + swr0: soundwire-controller@3250000 { + compatible = "qcom,soundwire-v1.7.0"; + reg = <0 0x03250000 0 0x2000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wsamacro>; + clock-names = "iface"; + label = "WSA"; + + qcom,din-ports = <2>; + qcom,dout-ports = <6>; + + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + swr2: soundwire-controller@33b0000 { + compatible = "qcom,soundwire-v1.7.0"; + reg = <0 0x033b0000 0 0x2000>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + + clocks = <&vamacro>; + clock-names = "iface"; + label = "TX"; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + vamacro: codec@33f0000 { + compatible = "qcom,sm8450-lpass-va-macro"; + reg = <0 0x033f0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", "macro", "dcodec", "npl"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + status = "disabled"; + }; + remoteproc_adsp: remoteproc@30000000 { compatible = "qcom,sm8450-adsp-pas"; - reg = <0 0x030000000 0 0x100>; + reg = <0 0x30000000 0 0x100>; interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, @@ -2133,6 +2368,45 @@ label = "lpass"; qcom,remote-pid = <2>; + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1801 0x0>; + }; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; @@ -2163,7 +2437,7 @@ remoteproc_cdsp: remoteproc@32300000 { compatible = "qcom,sm8450-cdsp-pas"; - reg = <0 0x032300000 0 0x1400000>; + reg = <0 0x32300000 0 0x1400000>; interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, @@ -2283,8 +2557,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 0>, - <&rpmhpd 12>; + power-domains = <&rpmhpd SM8450_CX>, + <&rpmhpd SM8450_MSS>; power-domain-names = "cx", "mss"; memory-region = <&mpss_mem>; @@ -2307,6 +2581,84 @@ }; }; + cci0: cci@ac15000 { + compatible = "qcom,sm8450-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac15000 0 0x1000>; + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac16000 { + compatible = "qcom,sm8450-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac16000 0 0x1000>; + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci2_default &cci3_default>; + pinctrl-1 = <&cci2_sleep &cci3_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + camcc: clock-controller@ade0000 { compatible = "qcom,sm8450-camcc"; reg = <0 0x0ade0000 0 0x20000>; @@ -2322,6 +2674,386 @@ status = "disabled"; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8450-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + /* same path used twice */ + interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>, + <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x2800 0x402>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8450-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-172000000 { + opp-hz = /bits/ 64 <172000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,sm8450-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,sm8450-dsi-phy-5nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,sm8450-dsi-phy-5nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8450-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <0>, /* dp1 */ + <0>, + <0>, /* dp2 */ + <0>, + <0>, /* dp3 */ + <0>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + status = "disabled"; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8450-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; @@ -2354,7 +3086,7 @@ #thermal-sensor-cells = <1>; }; - aoss_qmp: power-controller@c300000 { + aoss_qmp: power-management@c300000 { compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP @@ -2364,6 +3096,28 @@ #clock-cells = <0>; }; + spmi_bus: spmi@c400000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x00003000>, + <0 0x0c500000 0 0x00400000>, + <0 0x0c440000 0 0x00080000>, + <0 0x0c4c0000 0 0x00010000>, + <0 0x0c42d000 0 0x00010000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + ipcc: mailbox@ed18000 { compatible = "qcom,sm8450-ipcc", "qcom,ipcc"; reg = <0 0x0ed18000 0 0x1000>; @@ -2384,6 +3138,26 @@ gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + sdc2_sleep_state: sdc2-sleep-state { clk-pins { pins = "sdc2_clk"; @@ -2404,6 +3178,70 @@ }; }; + cci0_default: cci0-default-state { + /* SDA, SCL */ + pins = "gpio110", "gpio111"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_sleep: cci0-sleep-state { + /* SDA, SCL */ + pins = "gpio110", "gpio111"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_default: cci1-default-state { + /* SDA, SCL */ + pins = "gpio112", "gpio113"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_sleep: cci1-sleep-state { + /* SDA, SCL */ + pins = "gpio112", "gpio113"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci2_default: cci2-default-state { + /* SDA, SCL */ + pins = "gpio114", "gpio115"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci2_sleep: cci2-sleep-state { + /* SDA, SCL */ + pins = "gpio114", "gpio115"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci3_default: cci3-default-state { + /* SDA, SCL */ + pins = "gpio208", "gpio209"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci3_sleep: cci3-sleep-state { + /* SDA, SCL */ + pins = "gpio208", "gpio209"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + pcie0_default_state: pcie0-default-state { perst-pins { pins = "gpio94"; @@ -2797,7 +3635,135 @@ pins = "gpio76", "gpio77", "gpio78", "gpio79"; function = "qup20"; }; + }; + + lpass_tlmm: pinctrl@3440000 { + compatible = "qcom,sm8450-lpass-lpi-pinctrl"; + reg = <0 0x03440000 0x0 0x20000>, + <0 0x034d0000 0x0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + tx_swr_active: tx-swr-active-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_active: rx-swr-active-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + }; + }; + + dmic02_default: dmic02-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + }; + }; + wsa_swr_active: wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_active: wsa2-swr-active-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + }; + + sram@146aa000 { + compatible = "qcom,sm8450-imem", "syscon", "simple-mfd"; + reg = <0 0x146aa000 0 0x1000>; + ranges = <0 0 0x146aa000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; }; apps_smmu: iommu@15000000 { @@ -2999,6 +3965,7 @@ qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, <WAKE_TCS 2>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; @@ -3027,35 +3994,39 @@ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; }; - rpmhpd_opp_low_svs: opp3 { + rpmhpd_opp_low_svs_d1: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_low_svs: opp4 { opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; }; - rpmhpd_opp_svs: opp4 { + rpmhpd_opp_svs: opp5 { opp-level = <RPMH_REGULATOR_LEVEL_SVS>; }; - rpmhpd_opp_svs_l1: opp5 { + rpmhpd_opp_svs_l1: opp6 { opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; }; - rpmhpd_opp_nom: opp6 { + rpmhpd_opp_nom: opp7 { opp-level = <RPMH_REGULATOR_LEVEL_NOM>; }; - rpmhpd_opp_nom_l1: opp7 { + rpmhpd_opp_nom_l1: opp8 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; }; - rpmhpd_opp_nom_l2: opp8 { + rpmhpd_opp_nom_l2: opp9 { opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; }; - rpmhpd_opp_turbo: opp9 { + rpmhpd_opp_turbo: opp10 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; }; - rpmhpd_opp_turbo_l1: opp10 { + rpmhpd_opp_turbo_l1: opp11 { opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; }; }; @@ -3075,6 +4046,7 @@ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; gem_noc: interconnect@19100000 { @@ -3086,8 +4058,11 @@ system-cache-controller@19200000 { compatible = "qcom,sm8450-llcc"; - reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>, + <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>, + <0 0x19a00000 0 0x80000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; @@ -3108,6 +4083,7 @@ power-domains = <&gcc UFS_PHY_GDSC>; iommus = <&apps_smmu 0xe0 0x0>; + dma-coherent; interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; @@ -3161,16 +4137,17 @@ status = "disabled"; ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; + reg = <0 0x01d87400 0 0x188>, + <0 0x01d87600 0 0x200>, + <0 0x01d87c00 0 0x200>, + <0 0x01d87800 0 0x188>, + <0 0x01d87a00 0 0x200>; + #clock-cells = <1>; #phy-cells = <0>; }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -3192,6 +4169,9 @@ bus-width = <4>; dma-coherent; + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0x0>; + status = "disabled"; sdhc2_opp_table: opp-table { @@ -3254,8 +4234,27 @@ iommus = <&apps_smmu 0x0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; @@ -3268,12 +4267,15 @@ lpass_ag_noc: interconnect@3c40000 { compatible = "qcom,sm8450-lpass-ag-noc"; - reg = <0 0x3c40000 0 0x17200>; + reg = <0 0x03c40000 0 0x17200>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; }; + sound: sound { + }; + thermal-zones { aoss0-thermal { polling-delay-passive = <0>; @@ -3393,7 +4395,7 @@ type = "passive"; }; - cpu4_top_crit: cpu_crit { + cpu4_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3419,7 +4421,7 @@ type = "passive"; }; - cpu4_bottom_crit: cpu_crit { + cpu4_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3445,7 +4447,7 @@ type = "passive"; }; - cpu5_top_crit: cpu_crit { + cpu5_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3471,7 +4473,7 @@ type = "passive"; }; - cpu5_bottom_crit: cpu_crit { + cpu5_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3497,7 +4499,7 @@ type = "passive"; }; - cpu6_top_crit: cpu_crit { + cpu6_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3523,7 +4525,7 @@ type = "passive"; }; - cpu6_bottom_crit: cpu_crit { + cpu6_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3549,7 +4551,7 @@ type = "passive"; }; - cpu7_top_crit: cpu_crit { + cpu7_top_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3575,7 +4577,7 @@ type = "passive"; }; - cpu7_middle_crit: cpu_crit { + cpu7_middle_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3601,7 +4603,7 @@ type = "passive"; }; - cpu7_bottom_crit: cpu_crit { + cpu7_bottom_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3633,7 +4635,7 @@ type = "passive"; }; - gpu0_tj_cfg: tj_cfg { + gpu0_tj_cfg: tj-cfg { temperature = <95000>; hysteresis = <5000>; type = "passive"; @@ -3665,7 +4667,7 @@ type = "passive"; }; - gpu1_tj_cfg: tj_cfg { + gpu1_tj_cfg: tj-cfg { temperature = <95000>; hysteresis = <5000>; type = "passive"; @@ -3711,7 +4713,7 @@ type = "passive"; }; - cpu0_crit: cpu_crit { + cpu0_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3737,7 +4739,7 @@ type = "passive"; }; - cpu1_crit: cpu_crit { + cpu1_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3763,7 +4765,7 @@ type = "passive"; }; - cpu2_crit: cpu_crit { + cpu2_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; @@ -3789,7 +4791,7 @@ type = "passive"; }; - cpu3_crit: cpu_crit { + cpu3_crit: cpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts new file mode 100644 index 000000000000..e2b9bb6b1e27 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -0,0 +1,628 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8550 MTP"; + compatible = "qcom,sm8550-mtp", "qcom,sm8550"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s4g_1p3>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s4g_1p3>; + vdd-l12-supply = <&vreg_s6g_1p8>; + vdd-l15-supply = <&vreg_s6g_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l3-supply = <&vreg_s4e_0p9>; + + vreg_l3c_0p91: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s4e_0p9>; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l1-supply = <&vreg_s4e_0p9>; + vdd-l2-supply = <&vreg_s4e_0p9>; + vdd-l3-supply = <&vreg_s4g_1p3>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s4e_0p9: smps4 { + regulator-name = "vreg_s4e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p1: smps5 { + regulator-name = "vreg_s5e_1p1"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s4e_0p9>; + vdd-l2-supply = <&vreg_s4e_0p9>; + vdd-l3-supply = <&vreg_s4e_0p9>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p91: ldo3 { + regulator-name = "vreg_l3f_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + + vdd-l1-supply = <&vreg_s4g_1p3>; + vdd-l2-supply = <&vreg_s4g_1p3>; + vdd-l3-supply = <&vreg_s4g_1p3>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vreg_s1g_1p2: smps1 { + regulator-name = "vreg_s1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p8: smps2 { + regulator-name = "vreg_s2g_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p7: smps3 { + regulator-name = "vreg_s3g_0p7"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p3: smps4 { + regulator-name = "vreg_s4g_1p3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p8: smps5 { + regulator-name = "vreg_s5g_0p8"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p8: smps6 { + regulator-name = "vreg_s6g_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2g_1p2: ldo2 { + regulator-name = "vreg_l2g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3e_1p2>; + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; + pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1e_0p88>; + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie1 { + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3c_0p91>; + vdda-pll-supply = <&vreg_l3e_1p2>; + vdda-qref-supply = <&vreg_l1e_0p88>; + + status = "okay"; +}; + +&pm8550_gpios { + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio12"; + function = "normal"; + input-enable; + output-disable; + bias-pull-up; + power-source = <1>; /* 1.8 V */ + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/adsp.mbn", + "qcom/sm8550/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/cdsp.mbn", + "qcom/sm8550/cdsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8550/modem.mbn", + "qcom/sm8550/modem_dtb.mbn"; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + bus-width = <4>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; + + sde_dsi_active: sde-dsi-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_suspend: sde-dsi-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_active: sde-te-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_suspend: sde-te-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vccq2-supply = <&vreg_l3g_1p2>; + vccq2-max-microamp = <100>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3f_0p91>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts new file mode 100644 index 000000000000..d5a645ee2a61 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -0,0 +1,439 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8550 QRD"; + compatible = "qcom,sm8550-qrd", "qcom,sm8550"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s4g_1p25>; + vdd-l12-supply = <&vreg_s6g_1p86>; + vdd-l15-supply = <&vreg_s6g_1p86>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* ldo2 supplies SM8550 VDD_LPI_MX */ + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s4e_0p95: smps4 { + regulator-name = "vreg_s4e_0p95"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p08: smps5 { + regulator-name = "vreg_s5e_1p08"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p88: ldo3 { + regulator-name = "vreg_l3f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vreg_s1g_1p25: smps1 { + regulator-name = "vreg_s1g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p85: smps2 { + regulator-name = "vreg_s2g_0p85"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p8: smps3 { + regulator-name = "vreg_s3g_0p8"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p25: smps4 { + regulator-name = "vreg_s4g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p85: smps5 { + regulator-name = "vreg_s5g_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p86: smps6 { + regulator-name = "vreg_s6g_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/adsp.mbn", + "qcom/sm8550/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/cdsp.mbn", + "qcom/sm8550/cdsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8550/modem.mbn", + "qcom/sm8550/modem_dtb.mbn"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vccq2-supply = <&vreg_l3g_1p2>; + vccq2-max-microamp = <100>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3f_0p88>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi new file mode 100644 index 000000000000..558cbc430708 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -0,0 +1,5148 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8550-gcc.h> +#include <dt-bindings/clock/qcom,sm8550-tcsr.h> +#include <dt-bindings/clock/qcom,sm8550-dispcc.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interconnect/qcom,sm8550-rpmh.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,gpr.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; + + bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&rpmhcc RPMH_CXO_CLK_A>; + clock-mult = <1>; + clock-div = <2>; + }; + + pcie_1_phy_aux_clk: pcie-1-phy-aux-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a510"; + reg = <0 0>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a510"; + reg = <0 0x100>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a510"; + reg = <0 0x200>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a715"; + reg = <0 0x300>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <270>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a715"; + reg = <0 0x400>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <270>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a710"; + reg = <0 0x500>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <270>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a710"; + reg = <0 0x600>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <270>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-x3"; + reg = <0 0x700>; + clocks = <&cpufreq_hw 2>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 2>; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <588>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <800>; + exit-latency-us = <750>; + min-residency-us = <4090>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <600>; + exit-latency-us = <1550>; + min-residency-us = <4791>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <1050>; + exit-latency-us = <2500>; + min-residency-us = <5309>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <2700>; + exit-latency-us = <3500>; + min-residency-us = <13959>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8550", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + }; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,sm8550-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,sm8550-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0xa0000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp-region@80000000 { + reg = <0 0x80000000 0 0xa00000>; + no-map; + }; + + cpusys_vm_mem: cpusys-vm-region@80a00000 { + reg = <0 0x80a00000 0 0x400000>; + no-map; + }; + + hyp_tags_mem: hyp-tags-region@80e00000 { + reg = <0 0x80e00000 0 0x3d0000>; + no-map; + }; + + xbl_sc_mem: xbl-sc-region@d8100000 { + reg = <0 0xd8100000 0 0x40000>; + no-map; + }; + + hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 { + reg = <0 0x811d0000 0 0x30000>; + no-map; + }; + + /* merged xbl_dt_log, xbl_ramdump, aop_image */ + xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 { + reg = <0 0x81a00000 0 0x260000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-region@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0 0x81c60000 0 0x20000>; + no-map; + }; + + /* merged aop_config, tme_crash_dump, tme_log, uefi_log */ + aop_config_merged_mem: aop-config-merged-region@81c80000 { + reg = <0 0x81c80000 0 0x74000>; + no-map; + }; + + /* secdata region can be reused by apps */ + smem: smem@81d00000 { + compatible = "qcom,smem"; + reg = <0 0x81d00000 0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + adsp_mhi_mem: adsp-mhi-region@81f00000 { + reg = <0 0x81f00000 0 0x20000>; + no-map; + }; + + global_sync_mem: global-sync-region@82600000 { + reg = <0 0x82600000 0 0x100000>; + no-map; + }; + + tz_stat_mem: tz-stat-region@82700000 { + reg = <0 0x82700000 0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap-region@82800000 { + reg = <0 0x82800000 0 0x4600000>; + no-map; + }; + + mpss_mem: mpss-region@8a800000 { + reg = <0 0x8a800000 0 0x10800000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 { + reg = <0 0x9b000000 0 0x80000>; + no-map; + }; + + ipa_fw_mem: ipa-fw-region@9b080000 { + reg = <0 0x9b080000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi-region@9b090000 { + reg = <0 0x9b090000 0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: gpu-micro-code-region@9b09a000 { + reg = <0 0x9b09a000 0 0x2000>; + no-map; + }; + + spss_region_mem: spss-region@9b100000 { + reg = <0 0x9b100000 0 0x180000>; + no-map; + }; + + /* First part of the "SPU secure shared memory" region */ + spu_tz_shared_mem: spu-tz-shared-region@9b280000 { + reg = <0 0x9b280000 0 0x60000>; + no-map; + }; + + /* Second part of the "SPU secure shared memory" region */ + spu_modem_shared_mem: spu-modem-shared-region@9b2e0000 { + reg = <0 0x9b2e0000 0 0x20000>; + no-map; + }; + + camera_mem: camera-region@9b300000 { + reg = <0 0x9b300000 0 0x800000>; + no-map; + }; + + video_mem: video-region@9bb00000 { + reg = <0 0x9bb00000 0 0x700000>; + no-map; + }; + + cvp_mem: cvp-region@9c200000 { + reg = <0 0x9c200000 0 0x700000>; + no-map; + }; + + cdsp_mem: cdsp-region@9c900000 { + reg = <0 0x9c900000 0 0x2000000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 { + reg = <0 0x9e900000 0 0x80000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 { + reg = <0 0x9e980000 0 0x80000>; + no-map; + }; + + adspslpi_mem: adspslpi-region@9ea00000 { + reg = <0 0x9ea00000 0 0x4080000>; + no-map; + }; + + /* uefi region can be reused by apps */ + + /* Linux kernel image is loaded at 0xa8000000 */ + + rmtfs_mem: rmtfs-region@d4a80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xd4a80000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + mpss_dsm_mem: mpss-dsm-region@d4d00000 { + reg = <0 0xd4d00000 0 0x3300000>; + no-map; + }; + + tz_reserved_mem: tz-reserved-region@d8000000 { + reg = <0 0xd8000000 0 0x100000>; + no-map; + }; + + cpucp_fw_mem: cpucp-fw-region@d8140000 { + reg = <0 0xd8140000 0 0x1c0000>; + no-map; + }; + + qtee_mem: qtee-region@d8300000 { + reg = <0 0xd8300000 0 0x500000>; + no-map; + }; + + ta_mem: ta-region@d8800000 { + reg = <0 0xd8800000 0 0x8a00000>; + no-map; + }; + + tz_tags_mem: tz-tags-region@e1200000 { + reg = <0 0xe1200000 0 0x2740000>; + no-map; + }; + + hwfence_shbuf: hwfence-shbuf-region@e6440000 { + reg = <0 0xe6440000 0 0x279000>; + no-map; + }; + + trust_ui_vm_mem: trust-ui-vm-region@f3600000 { + reg = <0 0xf3600000 0 0x4aee000>; + no-map; + }; + + trust_ui_vm_dump: trust-ui-vm-dump-region@f80ee000 { + reg = <0 0xf80ee000 0 0x1000>; + no-map; + }; + + trust_ui_vm_qrtr: trust-ui-vm-qrt-region@f80ef000 { + reg = <0 0xf80ef000 0 0x9000>; + no-map; + }; + + trust_ui_vm_vblk0_ring: trust-ui-vm-vblk0-ring-region@f80f8000 { + reg = <0 0xf80f8000 0 0x4000>; + no-map; + }; + + trust_ui_vm_vblk1_ring: trust-ui-vm-vblk1-ring-region@f80fc000 { + reg = <0 0xf80fc000 0 0x4000>; + no-map; + }; + + trust_ui_vm_swiotlb: trust-ui-vm-swiotlb-region@f8100000 { + reg = <0 0xf8100000 0 0x100000>; + no-map; + }; + + oem_vm_mem: oem-vm-region@f8400000 { + reg = <0 0xf8400000 0 0x4800000>; + no-map; + }; + + oem_vm_vblk0_ring: oem-vm-vblk0-ring-region@fcc00000 { + reg = <0 0xfcc00000 0 0x4000>; + no-map; + }; + + oem_vm_swiotlb: oem-vm-swiotlb-region@fcc04000 { + reg = <0 0xfcc04000 0 0x100000>; + no-map; + }; + + hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 { + reg = <0 0xfce00000 0 0x2900000>; + no-map; + }; + + hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 { + reg = <0 0xff700000 0 0x100000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + #address-cells = <2>; + #size-cells = <2>; + + gcc: clock-controller@100000 { + compatible = "qcom,sm8550-gcc"; + reg = <0 0x00100000 0 0x1f4200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&bi_tcxo_div2>, <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>, + <&pcie_1_phy_aux_clk>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sm8550-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma"; + #dma-cells = <3>; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x3e>; + iommus = <&apps_smmu 0x436 0>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x423 0>; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + i2c8: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi8: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi9: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi10: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi11: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi12: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c13: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi13: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>, + <&gpi_dma2 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi15: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>, + <&gpi_dma2 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + i2c_master_hub_0: geniqup@9c0000 { + compatible = "qcom,geni-se-i2c-master-hub"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clock-names = "s-ahb"; + clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c_hub_0: i2c@980000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00980000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c0_data_clk>; + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_1: i2c@984000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00984000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c1_data_clk>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_2: i2c@988000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00988000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c2_data_clk>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_3: i2c@98c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c3_data_clk>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_4: i2c@990000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0x0 0x00990000 0x0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c4_data_clk>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_5: i2c@994000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c5_data_clk>; + interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_6: i2c@998000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c6_data_clk>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_7: i2c@99c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c7_data_clk>; + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_8: i2c@9a0000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a0000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c8_data_clk>; + interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c_hub_9: i2c@9a4000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a4000 0 0x4000>; + clock-names = "se", "core"; + clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_i2c9_data_clk>; + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma"; + #dma-cells = <3>; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x1e>; + iommus = <&apps_smmu 0xb6 0>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0xa3 0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>; + interconnect-names = "qup-core"; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + i2c0: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi0: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi3: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart7: serial@a9c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00a9c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_default>; + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; + interconnect-names = "qup-core", "qup-config"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + status = "disabled"; + }; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,sm8550-cnoc-main"; + reg = <0 0x01500000 0 0x13080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,sm8550-config-noc"; + reg = <0 0x01600000 0 0x6200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8550-system-noc"; + reg = <0 0x01680000 0 0x1d080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,sm8550-pcie-anoc"; + reg = <0 0x016c0000 0 0x12200>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8550-aggre1-noc"; + reg = <0 0x016e0000 0 0x14400>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8550-aggre2-noc"; + reg = <0 0x01700000 0 0x1e400>; + #interconnect-cells = <2>; + clocks = <&rpmhcc RPMH_IPA_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,sm8550-mmss-noc"; + reg = <0 0x01780000 0 0x5b800>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie0: pci@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8550"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <0>; + num-lanes = <2>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr"; + + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c06000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_0_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1: pci@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8550"; + reg = <0x0 0x01c08000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf1d>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x1000>, + <0x0 0x40100000 0x0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <1>; + num-lanes = <2>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x1480 0x1>, + <0x100 &apps_smmu 0x1481 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>, + <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; + reset-names = "pci", "link_down"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy"; + reg = <0x0 0x01c0e000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>, + <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>; + reset-names = "phy", "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_1_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0 0x01dc4000 0x0 0x28000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x481 0x0>; + }; + + crypto: crypto@1de0000 { + compatible = "qcom,sm8550-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0x0 0x01dfa000 0x0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x481 0x0>; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + }; + + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,sm8550-qmp-ufs-phy"; + reg = <0x0 0x01d80000 0x0 0x2000>; + clocks = <&tcsr TCSR_UFS_CLKREF_EN>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", "ref_aux"; + + power-domains = <&gcc UFS_MEM_PHY_GDSC>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sm8550-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x60 0x0>; + dma-coherent; + + interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; + + interconnect-names = "ufs-ddr", "cpu-ufs"; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&tcsr TCSR_UFS_PAD_CLKREF_EN>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <100000000 403000000>, + <0 0>, + <0 0>, + <0 0>; + qcom,ice = <&ice>; + + status = "disabled"; + }; + + ice: crypto@1d88000 { + compatible = "qcom,sm8550-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d88000 0 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fc0000 { + compatible = "qcom,sm8550-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8550-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8550_CX>, + <&rpmhpd SM8550_MSS>; + power-domain-names = "cx", "mss"; + + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "mpss"; + qcom,remote-pid = <1>; + }; + }; + + lpass_wsa2macro: codec@6aa0000 { + compatible = "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06aa0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "wsa2-mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&wsa2_swr_active>; + #sound-dai-cells = <1>; + }; + + swr3: soundwire-controller@6ab0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ab0000 0 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + label = "WSA2"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_rxmacro: codec@6ac0000 { + compatible = "qcom,sm8550-lpass-rx-macro"; + reg = <0 0x06ac0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&rx_swr_active>; + #sound-dai-cells = <1>; + }; + + swr1: soundwire-controller@6ad0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ad0000 0 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + label = "RX"; + + qcom,din-ports = <0>; + qcom,dout-ports = <10>; + + qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_txmacro: codec@6ae0000 { + compatible = "qcom,sm8550-lpass-tx-macro"; + reg = <0 0x06ae0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&tx_swr_active>; + #sound-dai-cells = <1>; + }; + + lpass_wsamacro: codec@6b00000 { + compatible = "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06b00000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_active>; + #sound-dai-cells = <1>; + }; + + swr0: soundwire-controller@6b10000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06b10000 0 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + label = "WSA"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + swr2: soundwire-controller@6d30000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06d30000 0 0x10000>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + clocks = <&lpass_vamacro>; + clock-names = "iface"; + label = "TX"; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_vamacro: codec@6d44000 { + compatible = "qcom,sm8550-lpass-va-macro"; + reg = <0 0x06d44000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", "macro", "dcodec"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,sm8550-lpass-lpi-pinctrl"; + reg = <0 0x06e80000 0 0x20000>, + <0 0x07250000 0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + tx_swr_active: tx-swr-active-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_active: rx-swr-active-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic02_default: dmic02-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + wsa_swr_active: wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_active: wsa2-swr-active-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,sm8550-lpass-lpiaon-noc"; + reg = <0 0x07400000 0 0x19080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_lpicx_noc: interconnect@7430000 { + compatible = "qcom,sm8550-lpass-lpicx-noc"; + reg = <0 0x07430000 0 0x3a200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@7e40000 { + compatible = "qcom,sm8550-lpass-ag-noc"; + reg = <0 0x07e40000 0 0xe080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x540 0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd SM8550_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + bus-width = <4>; + dma-coherent; + + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8550-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>, + <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x1c00 0x2>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8550-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + power-domains = <&rpmhpd SM8550_MMCX>; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + power-domains = <&rpmhpd SM8550_MMCX>; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae95000 { + compatible = "qcom,sm8550-dsi-phy-4nm"; + reg = <0 0x0ae95000 0 0x200>, + <0 0x0ae95200 0 0x280>, + <0 0x0ae95500 0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + power-domains = <&rpmhpd SM8550_MMCX>; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae97000 { + compatible = "qcom,sm8550-dsi-phy-4nm"; + reg = <0 0x0ae97000 0 0x200>, + <0 0x0ae97200 0 0x280>, + <0 0x0ae97500 0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8550-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <0>, /* dp0 */ + <0>, + <0>, /* dp1 */ + <0>, + <0>, /* dp2 */ + <0>, + <0>, /* dp3 */ + <0>; + power-domains = <&rpmhpd SM8550_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + status = "disabled"; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x088e3000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,sm8550-qmp-usb3-dp-phy"; + reg = <0x0 0x088e8000 0x0 0x3000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; + + power-domains = <&gcc USB3_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8550-dwc3", "qcom,dwc3"; + reg = <0x0 0x0a6f8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&tcsr TCSR_USB3_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0 0x0a600000 0x0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x40 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + phys = <&usb_1_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8550-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>, <126 716 12>, + <138 251 5>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c271000 { + compatible = "qcom,sm8550-tsens", "qcom,tsens-v2"; + reg = <0 0x0c271000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c272000 { + compatible = "qcom,sm8550-tsens", "qcom,tsens-v2"; + reg = <0 0x0c272000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c273000 { + compatible = "qcom,sm8550-tsens", "qcom,tsens-v2"; + reg = <0 0x0c273000 0 0x1000>, /* TM */ + <0 0x0c224000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,sm8550-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c400000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x3000>, + <0 0x0c500000 0 0x4000000>, + <0 0x0c440000 0 0x80000>, + <0 0x0c4c0000 0 0x20000>, + <0 0x0c42d000 0 0x4000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + qcom,bus-id = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f000000 { + compatible = "qcom,sm8550-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + wakeup-parent = <&pdc>; + + hub_i2c0_data_clk: hub-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio16", "gpio17"; + function = "i2chub0_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c1_data_clk: hub-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio18", "gpio19"; + function = "i2chub0_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c2_data_clk: hub-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio20", "gpio21"; + function = "i2chub0_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c3_data_clk: hub-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio22", "gpio23"; + function = "i2chub0_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c4_data_clk: hub-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio4", "gpio5"; + function = "i2chub0_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c5_data_clk: hub-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio6", "gpio7"; + function = "i2chub0_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c6_data_clk: hub-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "i2chub0_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c7_data_clk: hub-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio10", "gpio11"; + function = "i2chub0_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c8_data_clk: hub-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio206", "gpio207"; + function = "i2chub0_se8"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c9_data_clk: hub-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio84", "gpio85"; + function = "i2chub0_se9"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio95"; + function = "pcie0_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio98"; + function = "pcie1_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio28", "gpio29"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup1_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio36", "gpio37"; + function = "qup1_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio40", "gpio41"; + function = "qup1_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio44", "gpio45"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio48", "gpio49"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + scl-pins { + pins = "gpio57"; + function = "qup2_se0_l1_mira"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + sda-pins { + pins = "gpio56"; + function = "qup2_se0_l0_mira"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio60", "gpio61"; + function = "qup2_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + /* SDA, SCL */ + pins = "gpio64", "gpio65"; + function = "qup2_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + /* SDA, SCL */ + pins = "gpio68", "gpio69"; + function = "qup2_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + /* SDA, SCL */ + pins = "gpio2", "gpio3"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + /* SDA, SCL */ + pins = "gpio80", "gpio81"; + function = "qup2_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + /* SDA, SCL */ + pins = "gpio72", "gpio106"; + function = "qup2_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio31"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio28", "gpio29", "gpio30"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio35"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio32", "gpio33", "gpio34"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio39"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio36", "gpio37", "gpio38"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio43"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio40", "gpio41", "gpio42"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio47"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio44", "gpio45", "gpio46"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio55"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio51"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio48", "gpio49", "gpio50"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio59"; + function = "qup2_se0_l3_mira"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio56", "gpio57", "gpio58"; + function = "qup2_se0_l2_mira"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio63"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio60", "gpio61", "gpio62"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio67"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio64", "gpio65", "gpio66"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio71"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio68", "gpio69", "gpio70"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio119"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio2", "gpio3", "gpio118"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio83"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio80", "gpio81", "gpio82"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio75"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio72", "gpio106", "gpio74"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_uart7_default: qup-uart7-default-state { + /* TX, RX */ + pins = "gpio26", "gpio27"; + function = "qup1_se7"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8550-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + reg = <0 0x17100000 0 0x10000>, /* GICD */ + <0 0x17180000 0 0x200000>; /* GICR * 8 */ + ranges; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0 0x40000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + #address-cells = <2>; + #size-cells = <2>; + + gic_its: msi-controller@17140000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17140000 0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17420000 0 0x1000>; + ranges = <0 0 0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@17421000 { + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@17423000 { + reg = <0x17423000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17425000 { + reg = <0x17425000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17427000 { + reg = <0x17427000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17429000 { + reg = <0x17429000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@1742b000 { + reg = <0x1742b000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@1742d000 { + reg = <0x1742d000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0 0x17a00000 0 0x10000>, + <0 0x17a10000 0 0x10000>, + <0 0x17a20000 0 0x10000>, + <0 0x17a30000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2", "drv-3"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 0>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm8550-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8550-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm8550-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>, + <0 0x17d93000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; + clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + pmu@24091000 { + compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0 0x24091000 0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2086000>; + }; + + opp-1 { + opp-peak-kBps = <2929000>; + }; + + opp-2 { + opp-peak-kBps = <5931000>; + }; + + opp-3 { + opp-peak-kBps = <6515000>; + }; + + opp-4 { + opp-peak-kBps = <7980000>; + }; + + opp-5 { + opp-peak-kBps = <10437000>; + }; + + opp-6 { + opp-peak-kBps = <12157000>; + }; + + opp-7 { + opp-peak-kBps = <14060000>; + }; + + opp-8 { + opp-peak-kBps = <16113000>; + }; + }; + }; + + pmu@240b6400 { + compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b6400 0 0x600>; + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <4577000>; + }; + + opp-1 { + opp-peak-kBps = <7110000>; + }; + + opp-2 { + opp-peak-kBps = <9155000>; + }; + + opp-3 { + opp-peak-kBps = <12298000>; + }; + + opp-4 { + opp-peak-kBps = <14236000>; + }; + + opp-5 { + opp-peak-kBps = <16265000>; + }; + }; + }; + + gem_noc: interconnect@24100000 { + compatible = "qcom,sm8550-gem-noc"; + reg = <0 0x24100000 0 0xbb800>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@25000000 { + compatible = "qcom,sm8550-llcc"; + reg = <0 0x25000000 0 0x200000>, + <0 0x25200000 0 0x200000>, + <0 0x25400000 0 0x200000>, + <0 0x25600000 0 0x200000>, + <0 0x25800000 0 0x200000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc2_base", + "llcc3_base", + "llcc_broadcast_base"; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8550-adsp-pas"; + reg = <0x0 0x30000000 0x0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8550_LCX>, + <&rpmhpd SM8550_LMX>; + power-domain-names = "lcx", "lmx"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x80>, + <&apps_smmu 0x1063 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x80>, + <&apps_smmu 0x1064 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x80>, + <&apps_smmu 0x1065 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x80>, + <&apps_smmu 0x1066 0x0>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x80>, + <&apps_smmu 0x1067 0x0>; + }; + }; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1001 0x80>, + <&apps_smmu 0x1061 0x0>; + }; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,sm8550-nsp-noc"; + reg = <0 0x320c0000 0 0xe080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8550-cdsp-pas"; + reg = <0x0 0x32300000 0x0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SM8550_CX>, + <&rpmhpd SM8550_MXC>, + <&rpmhpd SM8550_NSP>; + power-domain-names = "cx", "mxc", "nsp"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1961 0x0>, + <&apps_smmu 0x0c01 0x20>, + <&apps_smmu 0x19c1 0x10>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1962 0x0>, + <&apps_smmu 0x0c02 0x20>, + <&apps_smmu 0x19c2 0x10>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1963 0x0>, + <&apps_smmu 0x0c03 0x20>, + <&apps_smmu 0x19c3 0x10>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1964 0x0>, + <&apps_smmu 0x0c04 0x20>, + <&apps_smmu 0x19c4 0x10>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1965 0x0>, + <&apps_smmu 0x0c05 0x20>, + <&apps_smmu 0x19c5 0x10>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1966 0x0>, + <&apps_smmu 0x0c06 0x20>, + <&apps_smmu 0x19c6 0x10>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1967 0x0>, + <&apps_smmu 0x0c07 0x20>, + <&apps_smmu 0x19c7 0x10>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1968 0x0>, + <&apps_smmu 0x0c08 0x20>, + <&apps_smmu 0x19c8 0x10>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + }; + + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu3-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + cpu3_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_top_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + cpu3_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_bottom_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-middle-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + cpu7_middle_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_middle_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_middle_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 15>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cdsp0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp0_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp1_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp2_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp3-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp3_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 9>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + ddr_config0: ddr0-config { + temperature = <90000>; + hysteresis = <5000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 10>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss0_config0: mdmss0-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss0_config1: mdmss0-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 11>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss1_config0: mdmss1-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss1_config1: mdmss1-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 12>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss2_config0: mdmss2-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss2_config1: mdmss2-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 13>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss3_config0: mdmss3-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss3_config1: mdmss3-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu0_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu1_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu2_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-3-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu3_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-4-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu4_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-5-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu5_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-6-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu6_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-7-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-config { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu7_junction_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; |