diff options
Diffstat (limited to 'arch/arm/boot/dts/imx28-cfa10056.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx28-cfa10056.dts | 146 |
1 files changed, 71 insertions, 75 deletions
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index c5f3337e8b39..0e15bdfd7281 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -13,81 +13,6 @@ model = "Crystalfontz CFA-10056 Board"; compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - spi2_pins_cfa10056: spi2-cfa10056@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_pins_cfa10056: lcdif-10056@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_cfa10056 - &lcdif_pins_cfa10056_pullup >; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <32000000>; - hactive = <480>; - vactive = <800>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <5>; - vsync-len = <5>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -111,3 +36,74 @@ }; }; }; + +&pinctrl { + spi2_pins_cfa10056: spi2-cfa10056@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_pins_cfa10056: lcdif-10056@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10056 + &lcdif_pins_cfa10056_pullup >; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <32000000>; + hactive = <480>; + vactive = <800>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <5>; + vsync-len = <5>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; |