diff options
Diffstat (limited to 'Documentation/usb/chipidea.rst')
| -rw-r--r-- | Documentation/usb/chipidea.rst | 19 |
1 files changed, 10 insertions, 9 deletions
diff --git a/Documentation/usb/chipidea.rst b/Documentation/usb/chipidea.rst index 68473abe2823..d9920c24eca0 100644 --- a/Documentation/usb/chipidea.rst +++ b/Documentation/usb/chipidea.rst @@ -35,10 +35,10 @@ which can show otg fsm variables and some controller registers value:: 1) Power up 2 Freescale i.MX6Q sabre SD boards with gadget class driver loaded (e.g. g_mass_storage). -2) Connect 2 boards with usb cable with one end is micro A plug, the other end +2) Connect 2 boards with usb cable: one end is micro A plug, the other end is micro B plug. - The A-device(with micro A plug inserted) should enumerate B-device. + The A-device (with micro A plug inserted) should enumerate B-device. 3) Role switch @@ -54,18 +54,19 @@ which can show otg fsm variables and some controller registers value:: echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req - or, by introducing HNP polling, B-Host can know when A-peripheral wish - to be host role, so this role switch also can be trigged in A-peripheral - side by answering the polling from B-Host, this can be done on A-device:: + or, by introducing HNP polling, B-Host can know when A-peripheral wishes to + be in the host role, so this role switch also can be triggered in + A-peripheral side by answering the polling from B-Host. This can be done on + A-device:: echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req A-device should switch back to host and enumerate B-device. -5) Remove B-device(unplug micro B plug) and insert again in 10 seconds, +5) Remove B-device (unplug micro B plug) and insert again in 10 seconds; A-device should enumerate B-device again. -6) Remove B-device(unplug micro B plug) and insert again after 10 seconds, +6) Remove B-device (unplug micro B plug) and insert again after 10 seconds; A-device should NOT enumerate B-device. if A-device wants to use bus: @@ -105,7 +106,7 @@ July 27, 2012 Revision 2.0 version 1.1a" 2. How to enable USB as system wakeup source -------------------------------------------- Below is the example for how to enable USB as system wakeup source -at imx6 platform. +on an imx6 platform. 2.1 Enable core's wakeup:: @@ -128,6 +129,6 @@ at imx6 platform. echo enabled > /sys/bus/usb/devices/1-1/power/wakeup If the system has only one usb port, and you want usb wakeup at this port, you -can use below script to enable usb wakeup:: +can use the below script to enable usb wakeup:: for i in $(find /sys -name wakeup | grep usb);do echo enabled > $i;done; |