2 files changed, 4 insertions, 4 deletions

diff --git a/Documentation/sound/soc/dai.rst b/Documentation/sound/soc/dai.rst
index 55820e51708f..2e99183a7a47 100644
--- a/Documentation/sound/soc/dai.rst
+++ b/Documentation/sound/soc/dai.rst
@@ -24,7 +24,7 @@ I2S
 ===
 
 I2S is a common 4 wire DAI used in HiFi, STB and portable devices. The Tx and
-Rx lines are used for audio transmission, whilst the bit clock (BCLK) and
+Rx lines are used for audio transmission, while the bit clock (BCLK) and
 left/right clock (LRC) synchronise the link. I2S is flexible in that either the
 controller or CODEC can drive (master) the BCLK and LRC clock lines. Bit clock
 usually varies depending on the sample rate and the master system clock
@@ -49,9 +49,9 @@ PCM
 
 PCM is another 4 wire interface, very similar to I2S, which can support a more
 flexible protocol. It has bit clock (BCLK) and sync (SYNC) lines that are used
-to synchronise the link whilst the Tx and Rx lines are used to transmit and
+to synchronise the link while the Tx and Rx lines are used to transmit and
 receive the audio data. Bit clock usually varies depending on sample rate
-whilst sync runs at the sample rate. PCM also supports Time Division
+while sync runs at the sample rate. PCM also supports Time Division
 Multiplexing (TDM) in that several devices can use the bus simultaneously (this
 is sometimes referred to as network mode).
 
diff --git a/Documentation/sound/soc/dpcm.rst b/Documentation/sound/soc/dpcm.rst
index fe61e02277f8..f6845b2278ea 100644
--- a/Documentation/sound/soc/dpcm.rst
+++ b/Documentation/sound/soc/dpcm.rst
@@ -218,7 +218,7 @@ like a BT phone call :-
                       *           * <----DAI5-----> FM
                       *************
 
-This allows the host CPU to sleep whilst the DSP, MODEM DAI and the BT DAI are
+This allows the host CPU to sleep while the DSP, MODEM DAI and the BT DAI are
 still in operation.
 
 A BE DAI link can also set the codec to a dummy device if the code is a device