diff options
Diffstat (limited to 'Documentation/sound/hd-audio/notes.rst')
| -rw-r--r-- | Documentation/sound/hd-audio/notes.rst | 19 |
1 files changed, 15 insertions, 4 deletions
diff --git a/Documentation/sound/hd-audio/notes.rst b/Documentation/sound/hd-audio/notes.rst index cf4d7158af78..a9e35b1f87bd 100644 --- a/Documentation/sound/hd-audio/notes.rst +++ b/Documentation/sound/hd-audio/notes.rst @@ -215,6 +215,17 @@ There are a few special model option values: * when ``generic`` is passed, the codec-specific parser is skipped and only the generic parser is used. +A new style for the model option that was introduced since 5.15 kernel +is to pass the PCI or codec SSID in the form of ``model=XXXX:YYYY`` +where XXXX and YYYY are the sub-vendor and sub-device IDs in hex +numbers, respectively. This is a kind of aliasing to another device; +when this form is given, the driver will refer to that SSID as a +reference to the quirk table. It'd be useful especially when the +target quirk isn't listed in the model table. For example, passing +model=103c:8862 will apply the quirk for HP ProBook 445 G8 (which +isn't found in the model table as of writing) as long as the device is +handled equivalently by the same driver. + Speaker and Headphone Output ---------------------------- @@ -489,7 +500,7 @@ add_jack_modes (bool) change the headphone amp and mic bias VREF capabilities power_save_node (bool) advanced power management for each widget, controlling the power - sate (D0/D3) of each widget node depending on the actual pin and + state (D0/D3) of each widget node depending on the actual pin and stream states power_down_unused (bool) power down the unused widgets, a subset of power_save_node, and @@ -640,14 +651,14 @@ via power-saving behavior. Enabling all tracepoints can be done like :: - # echo 1 > /sys/kernel/debug/tracing/events/hda/enable + # echo 1 > /sys/kernel/tracing/events/hda/enable then after some commands, you can traces from -/sys/kernel/debug/tracing/trace file. For example, when you want to +/sys/kernel/tracing/trace file. For example, when you want to trace what codec command is sent, enable the tracepoint like: :: - # cat /sys/kernel/debug/tracing/trace + # cat /sys/kernel/tracing/trace # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION |