diff options
Diffstat (limited to 'Documentation/scsi')
| -rw-r--r-- | Documentation/scsi/00-INDEX | 108 | ||||
| -rw-r--r-- | Documentation/scsi/scsi-parameters.txt | 5 | ||||
| -rw-r--r-- | Documentation/scsi/scsi_mid_low_api.txt | 2 | ||||
| -rw-r--r-- | Documentation/scsi/ufs.txt | 20 |
4 files changed, 20 insertions, 115 deletions
diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX deleted file mode 100644 index bb4a76f823e1..000000000000 --- a/Documentation/scsi/00-INDEX +++ /dev/null @@ -1,108 +0,0 @@ -00-INDEX - - this file -53c700.txt - - info on driver for 53c700 based adapters -BusLogic.txt - - info on driver for adapters with BusLogic chips -ChangeLog.1992-1997 - - Changes to scsi files, if not listed elsewhere -ChangeLog.arcmsr - - Changes to driver for ARECA's SATA RAID controller cards -ChangeLog.ips - - IBM ServeRAID driver Changelog -ChangeLog.lpfc - - Changes to lpfc driver -ChangeLog.megaraid - - Changes to LSI megaraid controller. -ChangeLog.megaraid_sas - - Changes to serial attached scsi version of LSI megaraid controller. -ChangeLog.ncr53c8xx - - Changes to ncr53c8xx driver -ChangeLog.sym53c8xx - - Changes to sym53c8xx driver -ChangeLog.sym53c8xx_2 - - Changes to second generation of sym53c8xx driver -FlashPoint.txt - - info on driver for BusLogic FlashPoint adapters -LICENSE.FlashPoint - - Licence of the Flashpoint driver -LICENSE.qla2xxx - - License for QLogic Linux Fibre Channel HBA Driver firmware. -LICENSE.qla4xxx - - License for QLogic Linux iSCSI HBA Driver. -Mylex.txt - - info on driver for Mylex adapters -NinjaSCSI.txt - - info on WorkBiT NinjaSCSI-32/32Bi driver -aacraid.txt - - Driver supporting Adaptec RAID controllers -advansys.txt - - List of Advansys Host Adapters -aha152x.txt - - info on driver for Adaptec AHA152x based adapters -aic79xx.txt - - Adaptec Ultra320 SCSI host adapters -aic7xxx.txt - - info on driver for Adaptec controllers -arcmsr_spec.txt - - ARECA FIRMWARE SPEC (for IOP331 adapter) -bfa.txt - - Brocade FC/FCOE adapter driver. -bnx2fc.txt - - FCoE hardware offload for Broadcom network interfaces. -cxgb3i.txt - - Chelsio iSCSI Linux Driver -dc395x.txt - - README file for the dc395x SCSI driver -dpti.txt - - info on driver for DPT SmartRAID and Adaptec I2O RAID based adapters -dtc3x80.txt - - info on driver for DTC 2x80 based adapters -g_NCR5380.txt - - info on driver for NCR5380 and NCR53c400 based adapters -hpsa.txt - - HP Smart Array Controller SCSI driver. -hptiop.txt - - HIGHPOINT ROCKETRAID 3xxx RAID DRIVER -libsas.txt - - Serial Attached SCSI management layer. -link_power_management_policy.txt - - Link power management options. -lpfc.txt - - LPFC driver release notes -megaraid.txt - - Common Management Module, shared code handling ioctls for LSI drivers -ncr53c8xx.txt - - info on driver for NCR53c8xx based adapters -osd.txt - Object-Based Storage Device, command set introduction. -osst.txt - - info on driver for OnStream SC-x0 SCSI tape -ppa.txt - - info on driver for IOmega zip drive -qlogicfas.txt - - info on driver for QLogic FASxxx based adapters -scsi-changer.txt - - README for the SCSI media changer driver -scsi-generic.txt - - info on the sg driver for generic (non-disk/CD/tape) SCSI devices. -scsi-parameters.txt - - List of SCSI-parameters to pass to the kernel at module load-time. -scsi.txt - - short blurb on using SCSI support as a module. -scsi_mid_low_api.txt - - info on API between SCSI layer and low level drivers -scsi_eh.txt - - info on SCSI midlayer error handling infrastructure -scsi_fc_transport.txt - - SCSI Fiber Channel Tansport -st.txt - - info on scsi tape driver -sym53c500_cs.txt - - info on PCMCIA driver for Symbios Logic 53c500 based adapters -sym53c8xx_2.txt - - info on second generation driver for sym53c8xx based adapters -tmscsim.txt - - info on driver for AM53c974 based adapters -ufs.txt - - info on Universal Flash Storage(UFS) and UFS host controller driver. diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt index 92999d4e0cb8..25a4b4cf04a6 100644 --- a/Documentation/scsi/scsi-parameters.txt +++ b/Documentation/scsi/scsi-parameters.txt @@ -97,11 +97,6 @@ parameters may be changed at runtime by the command allowing boot to proceed. none ignores them, expecting user space to do the scan. - scsi_mod.use_blk_mq= - [SCSI] use blk-mq I/O path by default - See SCSI_MQ_DEFAULT in drivers/scsi/Kconfig. - Format: <y/n> - sim710= [SCSI,HW] See header of drivers/scsi/sim710.c. diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index 177c031763c0..c1dd4939f4ae 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -1098,8 +1098,6 @@ of interest: unchecked_isa_dma - 1=>only use bottom 16 MB of ram (ISA DMA addressing restriction), 0=>can use full 32 bit (or better) DMA address space - use_clustering - 1=>SCSI commands in mid level's queue can be merged, - 0=>disallow SCSI command merging no_async_abort - 1=>Asynchronous aborts are not supported 0=>Timed-out commands will be aborted asynchronously hostt - pointer to driver's struct scsi_host_template from which diff --git a/Documentation/scsi/ufs.txt b/Documentation/scsi/ufs.txt index 41a6164592aa..520b5b033256 100644 --- a/Documentation/scsi/ufs.txt +++ b/Documentation/scsi/ufs.txt @@ -128,6 +128,26 @@ The current UFSHCD implementation supports following functionality, In this version of UFSHCD Query requests and power management functionality are not implemented. +4. BSG Support +------------------ + +This transport driver supports exchanging UFS protocol information units +(UPIUs) with a UFS device. Typically, user space will allocate +struct ufs_bsg_request and struct ufs_bsg_reply (see ufs_bsg.h) as +request_upiu and reply_upiu respectively. Filling those UPIUs should +be done in accordance with JEDEC spec UFS2.1 paragraph 10.7. +*Caveat emptor*: The driver makes no further input validations and sends the +UPIU to the device as it is. Open the bsg device in /dev/ufs-bsg and +send SG_IO with the applicable sg_io_v4: + + io_hdr_v4.guard = 'Q'; + io_hdr_v4.protocol = BSG_PROTOCOL_SCSI; + io_hdr_v4.subprotocol = BSG_SUB_PROTOCOL_SCSI_TRANSPORT; + io_hdr_v4.response = (__u64)reply_upiu; + io_hdr_v4.max_response_len = reply_len; + io_hdr_v4.request_len = request_len; + io_hdr_v4.request = (__u64)request_upiu; + UFS Specifications can be found at, UFS - http://www.jedec.org/sites/default/files/docs/JESD220.pdf UFSHCI - http://www.jedec.org/sites/default/files/docs/JESD223.pdf |