diff options
Diffstat (limited to 'Documentation/driver-api/media/cec-core.rst')
| -rw-r--r-- | Documentation/driver-api/media/cec-core.rst | 62 |
1 files changed, 26 insertions, 36 deletions
diff --git a/Documentation/driver-api/media/cec-core.rst b/Documentation/driver-api/media/cec-core.rst index 3ce26b7c2b2b..03016eeaf8f4 100644 --- a/Documentation/driver-api/media/cec-core.rst +++ b/Documentation/driver-api/media/cec-core.rst @@ -36,8 +36,9 @@ The struct cec_adapter represents the CEC adapter hardware. It is created by calling cec_allocate_adapter() and deleted by calling cec_delete_adapter(): .. c:function:: - struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, void *priv, - const char *name, u32 caps, u8 available_las); + struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, \ + void *priv, const char *name, \ + u32 caps, u8 available_las); .. c:function:: void cec_delete_adapter(struct cec_adapter *adap); @@ -74,7 +75,8 @@ To register the /dev/cecX device node and the remote control device (if CEC_CAP_RC is set) you call: .. c:function:: - int cec_register_adapter(struct cec_adapter *adap, struct device *parent); + int cec_register_adapter(struct cec_adapter *adap, \ + struct device *parent); where parent is the parent device. @@ -123,9 +125,8 @@ The seven low-level ops deal with various aspects of controlling the CEC adapter hardware: -To enable/disable the hardware: +To enable/disable the hardware:: -.. c:function:: int (*adap_enable)(struct cec_adapter *adap, bool enable); This callback enables or disables the CEC hardware. Enabling the CEC hardware @@ -137,9 +138,8 @@ state of the CEC adapter after calling cec_allocate_adapter() is disabled. Note that adap_enable must return 0 if enable is false. -To enable/disable the 'monitor all' mode: +To enable/disable the 'monitor all' mode:: -.. c:function:: int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable); If enabled, then the adapter should be put in a mode to also monitor messages @@ -150,9 +150,8 @@ called if the CEC_CAP_MONITOR_ALL capability is set. This callback is optional Note that adap_monitor_all_enable must return 0 if enable is false. -To enable/disable the 'monitor pin' mode: +To enable/disable the 'monitor pin' mode:: -.. c:function:: int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable); If enabled, then the adapter should be put in a mode to also monitor CEC pin @@ -163,9 +162,8 @@ the CEC_CAP_MONITOR_PIN capability is set. This callback is optional Note that adap_monitor_pin_enable must return 0 if enable is false. -To program a new logical address: +To program a new logical address:: -.. c:function:: int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr); If logical_addr == CEC_LOG_ADDR_INVALID then all programmed logical addresses @@ -177,9 +175,8 @@ can receive directed messages to that address. Note that adap_log_addr must return 0 if logical_addr is CEC_LOG_ADDR_INVALID. -To transmit a new message: +To transmit a new message:: -.. c:function:: int (*adap_transmit)(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg); @@ -196,17 +193,15 @@ The CEC_FREE_TIME_TO_USEC macro can be used to convert signal_free_time to microseconds (one data bit period is 2.4 ms). -To log the current CEC hardware status: +To log the current CEC hardware status:: -.. c:function:: void (*adap_status)(struct cec_adapter *adap, struct seq_file *file); This optional callback can be used to show the status of the CEC hardware. The status is available through debugfs: cat /sys/kernel/debug/cec/cecX/status -To free any resources when the adapter is deleted: +To free any resources when the adapter is deleted:: -.. c:function:: void (*adap_free)(struct cec_adapter *adap); This optional callback can be used to free any resources that might have been @@ -216,15 +211,14 @@ allocated by the driver. It's called from cec_delete_adapter. Your adapter driver will also have to react to events (typically interrupt driven) by calling into the framework in the following situations: -When a transmit finished (successfully or otherwise): +When a transmit finished (successfully or otherwise):: -.. c:function:: - void cec_transmit_done(struct cec_adapter *adap, u8 status, u8 arb_lost_cnt, - u8 nack_cnt, u8 low_drive_cnt, u8 error_cnt); + void cec_transmit_done(struct cec_adapter *adap, u8 status, + u8 arb_lost_cnt, u8 nack_cnt, u8 low_drive_cnt, + u8 error_cnt); -or: +or:: -.. c:function:: void cec_transmit_attempt_done(struct cec_adapter *adap, u8 status); The status can be one of: @@ -341,17 +335,15 @@ So this must work: $ cat einj.txt >error-inj The first callback is called when this file is read and it should show the -the current error injection state: +the current error injection state:: -.. c:function:: int (*error_inj_show)(struct cec_adapter *adap, struct seq_file *sf); It is recommended that it starts with a comment block with basic usage information. It returns 0 for success and an error otherwise. -The second callback will parse commands written to the ``error-inj`` file: +The second callback will parse commands written to the ``error-inj`` file:: -.. c:function:: bool (*error_inj_parse_line)(struct cec_adapter *adap, char *line); The ``line`` argument points to the start of the command. Any leading @@ -382,9 +374,8 @@ CEC protocol driven. The following high-level callbacks are available: }; The received() callback allows the driver to optionally handle a newly -received CEC message +received CEC message:: -.. c:function:: int (*received)(struct cec_adapter *adap, struct cec_msg *msg); If the driver wants to process a CEC message, then it can implement this @@ -399,15 +390,14 @@ CEC framework functions CEC Adapter drivers can call the following CEC framework functions: .. c:function:: - int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg, - bool block); + int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg, \ + bool block); Transmit a CEC message. If block is true, then wait until the message has been transmitted, otherwise just queue it and return. .. c:function:: - void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, - bool block); + void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block); Change the physical address. This function will set adap->phys_addr and send an event if it has changed. If cec_s_log_addrs() has been called and @@ -422,15 +412,15 @@ to another valid physical address, then this function will first set the address to CEC_PHYS_ADDR_INVALID before enabling the new physical address. .. c:function:: - void cec_s_phys_addr_from_edid(struct cec_adapter *adap, - const struct edid *edid); + void cec_s_phys_addr_from_edid(struct cec_adapter *adap, \ + const struct edid *edid); A helper function that extracts the physical address from the edid struct and calls cec_s_phys_addr() with that address, or CEC_PHYS_ADDR_INVALID if the EDID did not contain a physical address or edid was a NULL pointer. .. c:function:: - int cec_s_log_addrs(struct cec_adapter *adap, + int cec_s_log_addrs(struct cec_adapter *adap, \ struct cec_log_addrs *log_addrs, bool block); Claim the CEC logical addresses. Should never be called if CEC_CAP_LOG_ADDRS |