1 files changed, 82 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml b/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml
new file mode 100644
index 000000000000..6142b0b5b534
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/realtek,rtd-type-c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC RTD SoCs USB Type-C Connector detection
+
+maintainers:
+  - Stanley Chang <stanley_chang@realtek.com>
+
+description:
+  Realtek digital home center (DHC) RTD series SoCs include a type c module.
+  This module is able to detect the state of type c connector.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtd1295-type-c
+      - realtek,rtd1312c-type-c
+      - realtek,rtd1315e-type-c
+      - realtek,rtd1319-type-c
+      - realtek,rtd1319d-type-c
+      - realtek,rtd1395-type-c
+      - realtek,rtd1619-type-c
+      - realtek,rtd1619b-type-c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nvmem-cell-names:
+    items:
+      - const: usb-cal
+
+  nvmem-cells:
+    maxItems: 1
+    description:
+      The phandle to nvmem cell that contains the trimming data.
+      The type c parameter trimming data specified via efuse.
+      If unspecified, default value is used.
+
+  realtek,rd-ctrl-gpios:
+    description: The gpio node to control external Rd on board.
+    maxItems: 1
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    description: Properties for usb c connector.
+    type: object
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    type-c@7220 {
+        compatible = "realtek,rtd1619b-type-c";
+        reg = <0x7220 0x20>;
+        interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&usb_cc1_pins>, <&usb_cc2_pins>;
+        nvmem-cells = <&otp_usb_cal>;
+        nvmem-cell-names = "usb-cal";
+
+        connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            data-role = "dual";
+            power-role = "dual";
+        };
+    };