1 files changed, 87 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
new file mode 100644
index 000000000000..d274bb7a534b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/qcom-pm8xxx-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC RTC device
+
+maintainers:
+  - Satya Priya <quic_c_skakit@quicinc.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pm8058-rtc
+          - qcom,pm8921-rtc
+          - qcom,pm8941-rtc
+          - qcom,pmk8350-rtc
+      - items:
+          - enum:
+              - qcom,pm8018-rtc
+          - const: qcom,pm8921-rtc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: rtc
+      - const: alarm
+
+  interrupts:
+    maxItems: 1
+
+  allow-set-time:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates that the setting of RTC time is allowed by the host CPU.
+
+  nvmem-cells:
+    items:
+      - description:
+          four-byte nvmem cell holding a little-endian offset from the Unix
+          epoch representing the time when the RTC timer was last reset
+
+  nvmem-cell-names:
+    items:
+      - const: offset
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/spmi/spmi.h>
+
+    spmi {
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        pmic@0 {
+            compatible = "qcom,pm8941", "qcom,spmi-pmic";
+            reg = <0x0 SPMI_USID>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            rtc@6000 {
+                compatible = "qcom,pm8941-rtc";
+                reg = <0x6000>, <0x6100>;
+                reg-names = "rtc", "alarm";
+                interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+                nvmem-cells = <&rtc_offset>;
+                nvmem-cell-names = "offset";
+            };
+        };
+    };
+...