diff options
Diffstat (limited to 'Documentation/devicetree/bindings/regulator/act8865-regulator.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/act8865-regulator.txt | 117 |
1 files changed, 0 insertions, 117 deletions
diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt deleted file mode 100644 index b9f58e480349..000000000000 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ /dev/null @@ -1,117 +0,0 @@ -ACT88xx regulators -------------------- - -Required properties: -- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600" -- reg: I2C slave address - -Optional properties: -- system-power-controller: Telling whether or not this pmic is controlling - the system power. See Documentation/devicetree/bindings/power/power-controller.txt . -- active-semi,vsel-high: Indicates the VSEL pin is high. - If this property is missing, assume the VSEL pin is low(0). - -Optional input supply properties: -- for act8600: - - vp1-supply: The input supply for DCDC_REG1 - - vp2-supply: The input supply for DCDC_REG2 - - vp3-supply: The input supply for DCDC_REG3 - - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8 - SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies. -- for act8846: - - vp1-supply: The input supply for REG1 - - vp2-supply: The input supply for REG2 - - vp3-supply: The input supply for REG3 - - vp4-supply: The input supply for REG4 - - inl1-supply: The input supply for REG5, REG6 and REG7 - - inl2-supply: The input supply for REG8 and LDO_REG9 - - inl3-supply: The input supply for REG10, REG11 and REG12 -- for act8865: - - vp1-supply: The input supply for DCDC_REG1 - - vp2-supply: The input supply for DCDC_REG2 - - vp3-supply: The input supply for DCDC_REG3 - - inl45-supply: The input supply for LDO_REG1 and LDO_REG2 - - inl67-supply: The input supply for LDO_REG3 and LDO_REG4 - -Any standard regulator properties can be used to configure the single regulator. -regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified -for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h -file. - -The valid names for regulators are: - - for act8846: - REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12 - - for act8865: - DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4. - - for act8600: - DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7, - LDO_REG8, LDO_REG9, LDO_REG10, - -Example: --------- - -#include <dt-bindings/regulator/active-semi,8865-regulator.h> - - i2c1: i2c@f0018000 { - pmic: act8865@5b { - compatible = "active-semi,act8865"; - reg = <0x5b>; - active-semi,vsel-high; - - regulators { - vcc_1v8_reg: DCDC_REG1 { - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc_1v2_reg: DCDC_REG2 { - regulator-name = "VCC_1V2"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - - regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>, - <ACT8865_REGULATOR_MODE_LOWPOWER>; - regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-min-microvolt = <1150000>; - regulator-suspend-max-microvolt = <1150000>; - regulator-changeable-in-suspend; - regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>; - }; - }; - - vcc_3v3_reg: DCDC_REG3 { - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vddana_reg: LDO_REG1 { - regulator-name = "VDDANA"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - - regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>, - <ACT8865_REGULATOR_MODE_LOWPOWER>; - regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vddfuse_reg: LDO_REG2 { - regulator-name = "FUSE_2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - }; - }; - }; |