diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml new file mode 100644 index 000000000000..4009501b3414 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,qcs404-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QCS404 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm QCS404 SoC. + +properties: + compatible: + const: qcom,qcs404-pinctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: south + - const: north + - const: east + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 60 + + gpio-line-names: + maxItems: 120 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-qcs404-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-qcs404-tlmm-state" + additionalProperties: false + +$defs: + qcom-qcs404-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, adsp_ext, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, aud_cdc, audio_ts, bimc_dte0, + bimc_dte1, blsp_i2c0, blsp_i2c1, blsp_i2c3, blsp_i2c4, + blsp_i2c5, blsp_i2c_scl_a2, blsp_i2c_scl_b2, blsp_i2c_sda_a2, + blsp_i2c_sda_b2, blsp_spi0, blsp_spi2, blsp_spi3, blsp_spi4, + blsp_spi5, blsp_spi_clk_a1, blsp_spi_clk_b1, blsp_spi_cs_n_a1, + blsp_spi_cs_n_b1, blsp_spi_miso_a1, blsp_spi_miso_b1, + blsp_spi_mosi_a1, blsp_spi_mosi_b1, blsp_uart0, blsp_uart1, + blsp_uart2, blsp_uart3, blsp_uart5, blsp_uart_rx_a2, + blsp_uart_rx_b2, blsp_uart_tx_a2, blsp_uart_tx_b2, cri_trng, + cri_trng0, cri_trng1, dbg_out, dsd_clk_a, dsd_clk_b, ebi2_a, + ebi2_lcd, ebi_cdc, ebi_ch0, ext_lpass, ext_mclk0, ext_mclk1_a, + ext_mclk1_b, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, + gcc_tlmm, hdmi_ddc, hdmi_dtest, hdmi_lbk0, hdmi_lbk1, + hdmi_lbk2, hdmi_lbk3, hdmi_lbk4, hdmi_lbk5, hdmi_lbk6, + hdmi_lbk7, hdmi_lbk8, hdmi_lbk9, hdmi_pixel, hdmi_rcv, hdmi_tx, + i2s_1, i2s_2, i2s_3_data0_a, i2s_3_data0_b, i2s_3_data1_a, + i2s_3_data1_b, i2s_3_data2_a, i2s_3_data2_b, i2s_3_data3_a, + i2s_3_data3_b, i2s_3_sck_a, i2s_3_sck_b, i2s_3_ws_a, + i2s_3_ws_b, i2s_4, ir_in, ldo_en, ldo_update, mclk_in1, + mclk_in2, m_voc, nfc_dwl, nfc_irq, pcie_clk, pll_bist, + prng_rosc, pwm_led1, pwm_led10, pwm_led11, pwm_led12, + pwm_led13, pwm_led14, pwm_led15, pwm_led16, pwm_led17, + pwm_led18, pwm_led19, pwm_led2, pwm_led20, pwm_led21, + pwm_led22, pwm_led23, pwm_led24, pwm_led3, pwm_led4, pwm_led5, + pwm_led6, pwm_led7, pwm_led8, pwm_led9, qdss_cti_trig_in_a0, + qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, rgb_clk, rgb_data0, + rgb_data1, rgb_data2, rgb_data3, rgb_data4, rgb_data5, + rgb_data6, rgb_data7, rgb_data_b0, rgb_data_b1, rgb_data_b2, + rgb_data_b3, rgb_data_b4, rgb_data_b5, rgb_data_b6, + rgb_data_b7, rgb_de, rgb_hsync, rgb_mdp, rgb_vsync, rgmi_dll1, + rgmi_dll2, rgmii_ck, rgmii_ctl, rgmii_int, rgmii_mdc, + rgmii_mdio, rgmii_rx, rgmii_tx, rgmii_wol, sd_write, + spdifrx_opt, spi_lcd, spkr_dac0, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1, wsa_en ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,qcs404-pinctrl"; + reg = <0x01000000 0x200000>, + <0x01300000 0x200000>, + <0x07b00000 0x200000>; + reg-names = "south", "north", "east"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 120>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + + blsp1-i2c1-default-state { + pins = "gpio24", "gpio25"; + function = "blsp_i2c1"; + }; + + blsp1-i2c2-default-state { + sda-pins { + pins = "gpio19"; + function = "blsp_i2c_sda_a2"; + }; + + scl-pins { + pins = "gpio20"; + function = "blsp_i2c_scl_a2"; + }; + }; + }; |