1 files changed, 0 insertions, 107 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt
deleted file mode 100644
index 8763f448c376..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-NVIDIA Tegra194 pinmux controller
-
-Required properties:
-- compatible: "nvidia,tegra194-pinmux"
-- reg: Should contain a list of base address and size pairs for:
-  - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control)
-  - second entry: The PINMUX_AUX_* registers (pinmux)
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Tegra's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, tristate, drive strength, etc.
-
-See the TRM to determine which properties and values apply to each pin/group.
-Macro values for property values are defined in
-include/dt-binding/pinctrl/pinctrl-tegra.h.
-
-Required subnode-properties:
-- nvidia,pins : An array of strings. Each string contains the name of a pin or
-    group. Valid values for these names are listed below.
-
-Optional subnode-properties:
-- nvidia,function: A string containing the name of the function to mux to the
-    pin or group.
-- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
-    0: none, 1: down, 2: up.
-- nvidia,tristate: Integer.
-    0: drive, 1: tristate.
-- nvidia,enable-input: Integer. Enable the pin's input path.
-    enable :TEGRA_PIN_ENABLE and
-    disable or output only: TEGRA_PIN_DISABLE.
-- nvidia,open-drain: Integer.
-    enable: TEGRA_PIN_ENABLE.
-    disable: TEGRA_PIN_DISABLE.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
-    until reset.
-    enable: TEGRA_PIN_ENABLE.
-    disable: TEGRA_PIN_DISABLE.
-- nvidia,io-hv: Integer. Select high-voltage receivers.
-    normal: TEGRA_PIN_DISABLE
-    high: TEGRA_PIN_ENABLE
-- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
-    normal: TEGRA_PIN_DISABLE
-    high: TEGRA_PIN_ENABLE
-- nvidia,drive-type: Integer. Valid range 0...3.
-- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
-    Tegra TRM.
-- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
-    Tegra TRM.
-
-Valid values for pin and group names (nvidia,pin) are:
-
-    These correspond to Tegra PADCTL_* (pinmux) registers.
-
-  Mux groups:
-
-    These correspond to Tegra PADCTL_* (pinmux) registers. Any property
-    that exists in those registers may be set for the following pin names.
-
-    pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1
-
-  Drive groups:
-
-    These registers controls a single pin for which a mux group exists.
-    See the list above for the pin name to use when configuring the pinmux.
-
-    pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1
-
-Valid values for nvidia,functions are:
-
-    pe5
-
-Power Domain:
-    pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 are part of PCIE C5 power
-    partition. Client devices must enable this partition before accessing
-    these pins here.
-
-
-Example:
-
-		tegra_pinctrl: pinmux: pinmux@2430000 {
-			compatible = "nvidia,tegra194-pinmux";
-			reg = <0x2430000 0x17000
-			       0xc300000 0x4000>;
-
-			pinctrl-names = "pex_rst";
-			pinctrl-0 = <&pex_rst_c5_out_state>;
-
-			pex_rst_c5_out_state: pex_rst_c5_out {
-				pex_rst {
-					nvidia,pins = "pex_l5_rst_n_pgg1";
-					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-					nvidia,lpdr = <TEGRA_PIN_ENABLE>;
-					nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-					nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;
-					nvidia,tristate = <TEGRA_PIN_DISABLE>;
-					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				};
-			};
-		};