diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml | 270 |
1 files changed, 270 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml new file mode 100644 index 000000000000..d91b639ae7ae --- /dev/null +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml @@ -0,0 +1,270 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 PCIe RC/EP controller + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + - Richard Zhu <hongxing.zhu@nxp.com> + +description: + Generic Freescale i.MX PCIe Root Port and Endpoint controller + properties. + +properties: + clocks: + minItems: 3 + maxItems: 4 + + clock-names: + minItems: 3 + maxItems: 4 + + num-lanes: + const: 1 + + fsl,imx7d-pcie-phy: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to an fsl,imx7d-pcie-phy node. Additional + required properties for imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie, + and imx8mq-pcie-ep. + + power-domains: + minItems: 1 + items: + - description: The phandle pointing to the DISPLAY domain for + imx6sx-pcie, imx6sx-pcie-ep, to PCIE_PHY power domain for + imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie and imx8mq-pcie-ep. + - description: The phandle pointing to the PCIE_PHY power domains + for imx6sx-pcie and imx6sx-pcie-ep. + + power-domain-names: + minItems: 1 + items: + - const: pcie + - const: pcie_phy + + resets: + minItems: 2 + maxItems: 3 + description: Phandles to PCIe-related reset lines exposed by SRC + IP block. Additional required by imx7d-pcie, imx7d-pcie-ep, + imx8mq-pcie, and imx8mq-pcie-ep. + + reset-names: + minItems: 2 + maxItems: 3 + + fsl,tx-deemph-gen1: + description: Gen1 De-emphasis value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + fsl,tx-deemph-gen2-3p5db: + description: Gen2 (3.5db) De-emphasis value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + fsl,tx-deemph-gen2-6db: + description: Gen2 (6db) De-emphasis value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 20 + + fsl,tx-swing-full: + description: Gen2 TX SWING FULL value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 127 + + fsl,tx-swing-low: + description: TX launch amplitude swing_low value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 127 + + fsl,max-link-speed: + description: Specify PCI Gen for link capability (optional required). + Note that the IMX6 LVDS clock outputs do not meet gen2 jitter + requirements and thus for gen2 capability a gen2 compliant clock + generator should be used and configured. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4] + default: 1 + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + + vpcie-supply: + description: Should specify the regulator in charge of PCIe port power. + The regulator will be enabled when initializing the PCIe host and + disabled either as part of the init process or when shutting down + the host (optional required). + + vph-supply: + description: Should specify the regulator in charge of VPH one of + the three PCIe PHY powers. This regulator can be supplied by both + 1.8v and 3.3v voltage supplies (optional required). + +required: + - clocks + - clock-names + - num-lanes + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6sx-pcie + - fsl,imx6sx-pcie-ep + then: + properties: + clock-names: + items: + - {} + - {} + - const: pcie_phy + - const: pcie_inbound_axi + power-domains: + minItems: 2 + power-domain-names: + minItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8mq-pcie + - fsl,imx8mq-pcie-ep + then: + properties: + clock-names: + items: + - {} + - {} + - const: pcie_phy + - const: pcie_aux + - if: + properties: + compatible: + not: + contains: + enum: + - fsl,imx6sx-pcie + - fsl,imx8mq-pcie + - fsl,imx6sx-pcie-ep + - fsl,imx8mq-pcie-ep + then: + properties: + clocks: + maxItems: 3 + clock-names: + maxItems: 3 + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6q-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + - fsl,imx6q-pcie-ep + - fsl,imx6qp-pcie-ep + - fsl,imx7d-pcie-ep + then: + properties: + clock-names: + maxItems: 3 + contains: + const: pcie_phy + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8mm-pcie + - fsl,imx8mp-pcie + - fsl,imx8mm-pcie-ep + - fsl,imx8mp-pcie-ep + then: + properties: + clock-names: + maxItems: 3 + contains: + const: pcie_aux + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6q-pcie + - fsl,imx6qp-pcie + - fsl,imx6q-pcie-ep + - fsl,imx6qp-pcie-ep + then: + properties: + power-domains: false + power-domain-names: false + + - if: + not: + properties: + compatible: + contains: + enum: + - fsl,imx6sx-pcie + - fsl,imx6q-pcie + - fsl,imx6qp-pcie + - fsl,imx6sx-pcie-ep + - fsl,imx6q-pcie-ep + - fsl,imx6qp-pcie-ep + then: + properties: + power-domains: + maxItems: 1 + power-domain-names: false + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6q-pcie + - fsl,imx6sx-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + - fsl,imx8mq-pcie + - fsl,imx6q-pcie-ep + - fsl,imx6sx-pcie-ep + - fsl,imx6qp-pcie-ep + - fsl,imx7d-pcie-ep + - fsl,imx8mq-pcie-ep + then: + properties: + resets: + minItems: 3 + reset-names: + items: + - const: pciephy + - const: apps + - const: turnoff + else: + properties: + resets: + maxItems: 2 + reset-names: + items: + - const: apps + - const: turnoff + +additionalProperties: true + +... |