diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
6 files changed, 84 insertions, 84 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index faea214339ca..6a1ec50ad4fd 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -85,8 +85,8 @@ patternProperties: oneOf: - required: - - ports + - ports - required: - - ethernet-ports + - ethernet-ports ... diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index a3561276e609..8594f114f016 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -43,7 +43,7 @@ description: properties: compatible: - const: "qcom,sdm845-ipa" + const: "qcom,sdm845-ipa" reg: items: @@ -64,7 +64,7 @@ properties: maxItems: 1 clock-names: - const: core + const: core interrupts: items: @@ -96,8 +96,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array description: State bits used in by the AP to signal the modem. items: - - description: Whether the "ipa-clock-enabled" state bit is valid - - description: Whether the IPA clock is enabled (if valid) + - description: Whether the "ipa-clock-enabled" state bit is valid + - description: Whether the IPA clock is enabled (if valid) qcom,smem-state-names: $ref: /schemas/types.yaml#/definitions/string-array @@ -140,9 +140,9 @@ required: oneOf: - required: - - modem-init + - modem-init - required: - - memory-region + - memory-region examples: - | diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index 7d84a863b9b9..cbacc04fc9e6 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -46,10 +46,10 @@ properties: clock-names: oneOf: - items: # for Pro4 - - const: gio - - const: ether - - const: ether-gb - - const: ether-phy + - const: gio + - const: ether + - const: ether-gb + - const: ether-phy - const: ether # for others resets: @@ -59,8 +59,8 @@ properties: reset-names: oneOf: - items: # for Pro4 - - const: gio - - const: ether + - const: gio + - const: ether - const: ether # for others socionext,syscon-phy-mode: diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index fafa34cebdb1..e5dff66df481 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -48,11 +48,11 @@ properties: minItems: 3 maxItems: 5 items: - - description: GMAC main clock - - description: MAC TX clock - - description: MAC RX clock - - description: For MPU family, used for power mode - - description: For MPU family, used for PHY without quartz + - description: GMAC main clock + - description: MAC TX clock + - description: MAC RX clock + - description: For MPU family, used for power mode + - description: For MPU family, used for PHY without quartz clock-names: minItems: 3 @@ -89,7 +89,7 @@ required: - st,syscon examples: - - | + - | #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/stm32mp1-clks.h> #include <dt-bindings/reset/stm32mp1-resets.h> diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 3ea0e1290dbb..dadeb8f811c0 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -35,7 +35,7 @@ properties: reg: maxItems: 1 description: - The physical base address and size of full the CPSW module IO range + The physical base address and size of full the CPSW module IO range '#address-cells': const: 1 @@ -85,36 +85,36 @@ properties: patternProperties: "^port@[0-9]+$": - type: object - description: CPSW external ports - - allOf: - - $ref: ethernet-controller.yaml# - - properties: - reg: - items: - - enum: [1, 2] - description: CPSW port number - - phys: - maxItems: 1 - description: phandle on phy-gmii-sel PHY - - label: - description: label associated with this port - - ti,dual-emac-pvid: - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 1 - maximum: 1024 - description: - Specifies default PORT VID to be used to segregate - ports. Default value - CPSW port number. - - required: - - reg - - phys + type: object + description: CPSW external ports + + allOf: + - $ref: ethernet-controller.yaml# + + properties: + reg: + items: + - enum: [1, 2] + description: CPSW port number + + phys: + maxItems: 1 + description: phandle on phy-gmii-sel PHY + + label: + description: label associated with this port + + ti,dual-emac-pvid: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 1024 + description: + Specifies default PORT VID to be used to segregate + ports. Default value - CPSW port number. + + required: + - reg + - phys cpts: type: object diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 174579370a22..227270cbf892 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -55,7 +55,7 @@ properties: reg: maxItems: 1 description: - The physical base address and size of full the CPSW2G NUSS IO range + The physical base address and size of full the CPSW2G NUSS IO range reg-names: items: @@ -100,38 +100,38 @@ properties: patternProperties: port@1: - type: object - description: CPSW2G NUSS external ports - - $ref: ethernet-controller.yaml# - - properties: - reg: - items: - - const: 1 - description: CPSW port number - - phys: - maxItems: 1 - description: phandle on phy-gmii-sel PHY - - label: - description: label associated with this port - - ti,mac-only: - $ref: /schemas/types.yaml#definitions/flag - description: - Specifies the port works in mac-only mode. - - ti,syscon-efuse: - $ref: /schemas/types.yaml#definitions/phandle-array - description: - Phandle to the system control device node which provides access - to efuse IO range with MAC addresses - - required: - - reg - - phys + type: object + description: CPSW2G NUSS external ports + + $ref: ethernet-controller.yaml# + + properties: + reg: + items: + - const: 1 + description: CPSW port number + + phys: + maxItems: 1 + description: phandle on phy-gmii-sel PHY + + label: + description: label associated with this port + + ti,mac-only: + $ref: /schemas/types.yaml#definitions/flag + description: + Specifies the port works in mac-only mode. + + ti,syscon-efuse: + $ref: /schemas/types.yaml#definitions/phandle-array + description: + Phandle to the system control device node which provides access + to efuse IO range with MAC addresses + + required: + - reg + - phys additionalProperties: false |