diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/sti-dwmac.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/sti-dwmac.txt | 5 |
1 files changed, 2 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt index 062c5174add3..e16287c06e5e 100644 --- a/Documentation/devicetree/bindings/net/sti-dwmac.txt +++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt @@ -7,8 +7,7 @@ and what is needed on STi platforms to program the stmmac glue logic. The device node has following properties. Required properties: - - compatible : Can be "st,stih415-dwmac", "st,stih416-dwmac", - "st,stih407-dwmac", "st,stid127-dwmac". + - compatible : "st,stih407-dwmac" - st,syscon : Should be phandle/offset pair. The phandle to the syscon node which encompases the glue register, and the offset of the control register. - st,gmac_en: this is to enable the gmac into a dedicated sysctl control @@ -22,7 +21,7 @@ Optional properties: MAC can generate it. - st,tx-retime-src: This specifies which clk is wired up to the mac for retimeing tx lines. This is totally board dependent and can take one of the - posssible values from "txclk", "clk_125" or "clkgen". + possible values from "txclk", "clk_125" or "clkgen". If not passed, the internal clock will be used by default. - sti-ethclk: this is the phy clock. - sti-clkconf: this is an extra sysconfig register, available in new SoCs, |