1 files changed, 81 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
new file mode 100644
index 000000000000..37cb39a3a62e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/brcm,bcm4377-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4377 family PCIe Bluetooth Chips
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  This binding describes Broadcom BCM4377 family PCIe-attached bluetooth chips
+  usually found in Apple machines. The Wi-Fi part of the chip is described in
+  bindings/net/wireless/brcm,bcm4329-fmac.yaml.
+
+allOf:
+  - $ref: bluetooth-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - pci14e4,5fa0 # BCM4377
+      - pci14e4,5f69 # BCM4378
+      - pci14e4,5f71 # BCM4387
+
+  reg:
+    maxItems: 1
+
+  brcm,board-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Board type of the Bluetooth chip. This is used to decouple
+      the overall system board from the Bluetooth module and used to construct
+      firmware and calibration data filenames.
+      On Apple platforms, this should be the Apple module-instance codename
+      prefixed by "apple,", e.g. "apple,atlantisb".
+    pattern: '^apple,.*'
+
+  brcm,taurus-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Bluetooth radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device.
+      This blob is used if the chip stepping of the Bluetooth module does not
+      support beamforming.
+
+  brcm,taurus-bf-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Bluetooth radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device.
+      This blob is used if the chip stepping of the Bluetooth module supports
+      beamforming.
+
+  local-bd-address: true
+
+required:
+  - compatible
+  - reg
+  - local-bd-address
+  - brcm,board-type
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie@a0000000 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <0xa0000000 0x1000000>;
+      device_type = "pci";
+      ranges = <0x43000000 0x6 0xa0000000 0xa0000000 0x0 0x20000000>;
+
+      bluetooth@0,1 {
+        compatible = "pci14e4,5f69";
+        reg = <0x100 0x0 0x0 0x0 0x0>;
+        brcm,board-type = "apple,honshu";
+        /* To be filled by the bootloader */
+        local-bd-address = [00 00 00 00 00 00];
+      };
+    };