diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
142 files changed, 14829 insertions, 3734 deletions
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt deleted file mode 100644 index 5c6eabeed341..000000000000 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ /dev/null @@ -1,280 +0,0 @@ -* AB8500 Multi-Functional Device (MFD) - -Required parent device properties: -- compatible : contains "stericsson,ab8500" or "stericsson,ab8505"; -- interrupts : contains the IRQ line for the AB8500 -- interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain) -- #interrupt-cells : should be 2, for 2-cell format - - The first cell is the AB8500 local IRQ number - - The second cell is used to specify optional parameters - - bits[3:0] trigger type and level flags: - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - -The AB8500 consists of a large and varied group of sub-devices: - -Device IRQ Names Supply Names Description ------- --------- ------------ ----------- -ab8500-bm : : : Battery Manager -ab8500-btemp : : : Battery Temperature -ab8500-charger : : : Battery Charger -ab8500-codec : : : Audio Codec -ab8500-fg : : vddadc : Fuel Gauge - : NCONV_ACCU : : Accumulate N Sample Conversion - : BATT_OVV : : Battery Over Voltage - : LOW_BAT_F : : LOW threshold battery voltage - : CC_INT_CALIB : : Coulomb Counter Internal Calibration - : CCEOC : : Coulomb Counter End of Conversion -ab8500-btemp : : vtvout : Battery Temperature - : BAT_CTRL_INDB : : Battery Removal Indicator - : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C - : BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C - : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp - : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp -ab8500-charger : : vddadc : Charger interface - : MAIN_CH_UNPLUG_DET : : main charger unplug detection management (not in 8505) - : MAIN_CHARGE_PLUG_DET : : main charger plug detection management (not in 8505) - : MAIN_EXT_CH_NOT_OK : : main charger not OK - : MAIN_CH_TH_PROT_R : : Die temp is above main charger - : MAIN_CH_TH_PROT_F : : Die temp is below main charger - : VBUS_DET_F : : VBUS falling detected - : VBUS_DET_R : : VBUS rising detected - : USB_LINK_STATUS : : USB link status has changed - : USB_CH_TH_PROT_R : : Die temp is above usb charger - : USB_CH_TH_PROT_F : : Die temp is below usb charger - : USB_CHARGER_NOT_OKR : : allowed USB charger not ok detection - : VBUS_OVV : : Overvoltage on Vbus ball detected (USB charge is stopped) - : CH_WD_EXP : : Charger watchdog detected -ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter - SW_CONV_END : : -ab8500-gpio : : : GPIO Controller (AB8500) -ab8505-gpio : : : GPIO Controller (AB8505) -ab8500-ponkey : ONKEY_DBF : : Power-on Key - ONKEY_DBR : : -ab8500-pwm : : : Pulse Width Modulator -ab8500-regulator : : : Regulators (AB8500) -ab8505-regulator : : : Regulators (AB8505) -ab8500-rtc : 60S : : Real Time Clock - : ALARM : : -ab8500-sysctrl : : : System Control -ab8500-usb : ID_WAKEUP_R : vddulpivio18 : Universal Serial Bus - : ID_WAKEUP_F : v-ape : - : VBUS_DET_F : musb_1v8 : - : VBUS_DET_R : : - : USB_LINK_STATUS : : - : USB_ADP_PROBE_PLUG : : - : USB_ADP_PROBE_UNPLUG : : - -Required child device properties: -- compatible : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey| - pwm|regulator|rtc|sysctrl|usb]"; - - A few child devices require ADC channels from the GPADC node. Those follow the - standard bindings from iio/iio-bindings.txt and iio/adc/adc.txt - - abx500-temp : io-channels "aux1" and "aux2" for measuring external - temperatures. - ab8500-fg : io-channel "main_bat_v" for measuring main battery voltage, - ab8500-btemp : io-channels "btemp_ball" and "bat_ctrl" for measuring the - battery voltage. - ab8500-charger : io-channels "main_charger_v", "main_charger_c", "vbus_v", - "usb_charger_c" for measuring voltage and current of the - different charging supplies. - -Optional child device properties: -- interrupts : contains the device IRQ(s) using the 2-cell format (see above) -- interrupt-names : contains names of IRQ resource in the order in which they were - supplied in the interrupts property -- <supply_name>-supply : contains a phandle to the regulator supply node in Device Tree - -Non-standard child device properties: - - Audio CODEC: - - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential) - - stericsson,amic1a-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic - - stericsson,amic1b-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic - - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic - - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580) - -ab8500 { - compatible = "stericsson,ab8500"; - interrupts = <0 40 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - - ab8500-rtc { - compatible = "stericsson,ab8500-rtc"; - interrupts = <17 0x4 - 18 0x4>; - interrupt-names = "60S", "ALARM"; - }; - - ab8500-gpadc { - compatible = "stericsson,ab8500-gpadc"; - interrupts = <32 0x4 - 39 0x4>; - interrupt-names = "HW_CONV_END", "SW_CONV_END"; - vddadc-supply = <&ab8500_ldo_tvout_reg>; - #address-cells = <1>; - #size-cells = <0>; - #io-channel-cells = <1>; - - /* GPADC channels */ - bat_ctrl: channel@1 { - reg = <0x01>; - }; - btemp_ball: channel@2 { - reg = <0x02>; - }; - main_charger_v: channel@3 { - reg = <0x03>; - }; - acc_detect1: channel@4 { - reg = <0x04>; - }; - acc_detect2: channel@5 { - reg = <0x05>; - }; - adc_aux1: channel@6 { - reg = <0x06>; - }; - adc_aux2: channel@7 { - reg = <0x07>; - }; - main_batt_v: channel@8 { - reg = <0x08>; - }; - vbus_v: channel@9 { - reg = <0x09>; - }; - main_charger_c: channel@a { - reg = <0x0a>; - }; - usb_charger_c: channel@b { - reg = <0x0b>; - }; - bk_bat_v: channel@c { - reg = <0x0c>; - }; - die_temp: channel@d { - reg = <0x0d>; - }; - usb_id: channel@e { - reg = <0x0e>; - }; - xtal_temp: channel@12 { - reg = <0x12>; - }; - vbat_true_meas: channel@13 { - reg = <0x13>; - }; - bat_ctrl_and_ibat: channel@1c { - reg = <0x1c>; - }; - vbat_meas_and_ibat: channel@1d { - reg = <0x1d>; - }; - vbat_true_meas_and_ibat: channel@1e { - reg = <0x1e>; - }; - bat_temp_and_ibat: channel@1f { - reg = <0x1f>; - }; - }; - - ab8500_temp { - compatible = "stericsson,abx500-temp"; - io-channels = <&gpadc 0x06>, - <&gpadc 0x07>; - io-channel-name = "aux1", "aux2"; - }; - - ab8500_battery: ab8500_battery { - stericsson,battery-type = "LIPO"; - thermistor-on-batctrl; - }; - - ab8500_fg { - compatible = "stericsson,ab8500-fg"; - battery = <&ab8500_battery>; - io-channels = <&gpadc 0x08>; - io-channel-name = "main_bat_v"; - }; - - ab8500_btemp { - compatible = "stericsson,ab8500-btemp"; - battery = <&ab8500_battery>; - io-channels = <&gpadc 0x02>, - <&gpadc 0x01>; - io-channel-name = "btemp_ball", - "bat_ctrl"; - }; - - ab8500_charger { - compatible = "stericsson,ab8500-charger"; - battery = <&ab8500_battery>; - vddadc-supply = <&ab8500_ldo_tvout_reg>; - io-channels = <&gpadc 0x03>, - <&gpadc 0x0a>, - <&gpadc 0x09>, - <&gpadc 0x0b>; - io-channel-name = "main_charger_v", - "main_charger_c", - "vbus_v", - "usb_charger_c"; - }; - - ab8500-usb { - compatible = "stericsson,ab8500-usb"; - interrupts = < 90 0x4 - 96 0x4 - 14 0x4 - 15 0x4 - 79 0x4 - 74 0x4 - 75 0x4>; - interrupt-names = "ID_WAKEUP_R", - "ID_WAKEUP_F", - "VBUS_DET_F", - "VBUS_DET_R", - "USB_LINK_STATUS", - "USB_ADP_PROBE_PLUG", - "USB_ADP_PROBE_UNPLUG"; - vddulpivio18-supply = <&ab8500_ldo_intcore_reg>; - v-ape-supply = <&db8500_vape_reg>; - musb_1v8-supply = <&db8500_vsmps2_reg>; - }; - - ab8500-ponkey { - compatible = "stericsson,ab8500-ponkey"; - interrupts = <6 0x4 - 7 0x4>; - interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; - }; - - ab8500-sysctrl { - compatible = "stericsson,ab8500-sysctrl"; - }; - - ab8500-pwm { - compatible = "stericsson,ab8500-pwm"; - }; - - codec: ab8500-codec { - compatible = "stericsson,ab8500-codec"; - - stericsson,earpeice-cmv = <950>; /* Units in mV. */ - }; - - ab8500-regulators { - compatible = "stericsson,ab8500-regulator"; - - ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - /* - * See: Documentation/devicetree/bindings/regulator/regulator.txt - * for more information on regulators - */ - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/ac100.txt b/Documentation/devicetree/bindings/mfd/ac100.txt deleted file mode 100644 index dff219f07493..000000000000 --- a/Documentation/devicetree/bindings/mfd/ac100.txt +++ /dev/null @@ -1,50 +0,0 @@ -X-Powers AC100 Codec/RTC IC Device Tree bindings - -AC100 is a audio codec and RTC subsystem combo IC. The 2 parts are -separated, including power supplies and interrupt lines, but share -a common register address space and host interface. - -Required properties: -- compatible: "x-powers,ac100" -- reg: The I2C slave address or RSB hardware address for the chip -- sub-nodes: - - codec - - compatible: "x-powers,ac100-codec" - - interrupts: SoC NMI / GPIO interrupt connected to the - IRQ_AUDIO pin - - #clock-cells: Shall be 0 - - clock-output-names: "4M_adda" - - - see clock/clock-bindings.txt for common clock bindings - - - rtc - - compatible: "x-powers,ac100-rtc" - - clocks: A phandle to the codec's "4M_adda" clock - - #clock-cells: Shall be 1 - - clock-output-names: "cko1_rtc", "cko2_rtc", "cko3_rtc" - - - see clock/clock-bindings.txt for common clock bindings - -Example: - -ac100: codec@e89 { - compatible = "x-powers,ac100"; - reg = <0xe89>; - - ac100_codec: codec { - compatible = "x-powers,ac100-codec"; - interrupt-parent = <&r_pio>; - interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */ - #clock-cells = <0>; - clock-output-names = "4M_adda"; - }; - - ac100_rtc: rtc { - compatible = "x-powers,ac100-rtc"; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - clocks = <&ac100_codec>; - #clock-cells = <1>; - clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc"; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt index e6f168db6c72..5ca75d888b4a 100644 --- a/Documentation/devicetree/bindings/mfd/act8945a.txt +++ b/Documentation/devicetree/bindings/mfd/act8945a.txt @@ -71,7 +71,7 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; interrupt-parent = <&pioA>; - interrupts = <45 GPIO_ACTIVE_LOW>; + interrupts = <45 IRQ_TYPE_LEVEL_LOW>; active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml new file mode 100644 index 000000000000..6811246c5771 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi ATC260x Power Management IC + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + +description: | + ATC260x series PMICs integrates Audio Codec, Power Management, RTC, IR + and GPIO controller blocks. Currently only the PM related functionalities + (i.e. regulators and system power-off/reboot) for the ATC2603C and ATC2609A + chip variants are supported. + ATC2603C includes 3 programmable DC-DC converters, 9 programmable LDO + regulators and 1 fixed LDO regulator. + ATC2609A includes 5 programmable DC-DC converters and 10 programmable LDO + regulators. + +allOf: + - $ref: ../input/input.yaml + +properties: + compatible: + enum: + - actions,atc2603c + - actions,atc2609a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-time-sec: + description: | + Duration in seconds which the key should be kept pressed for device + to reset automatically. The hardware default is 8. Use 0 to disable + this functionality. + enum: [0, 6, 8, 10, 12] + + regulators: + type: object + description: | + List of child nodes specifying the regulators, depending on chip variant: + * ATC2603C: dcdc[1-3], ldo[1-3,5-8,11,12], switchldo1 + * ATC2609A: dcdc[0-4], ldo[0-9] + + properties: + compatible: + enum: + - actions,atc2603c-regulator + - actions,atc2609a-regulator + + switchldo1: + type: object + $ref: ../regulator/regulator.yaml + + properties: + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-allow-bypass: true + regulator-active-discharge: true + + additionalProperties: false + + patternProperties: + "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2]|switchldo1)-supply$": + description: ATC260x voltage regulators supplies + + "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$": + type: object + $ref: ../regulator/regulator.yaml + + properties: + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-allow-bypass: true + + additionalProperties: false + + allOf: + - if: + properties: + compatible: + contains: + const: actions,atc2603c-regulator + then: + patternProperties: + "^(dcdc[0,4]|ldo[0,4,9])(-supply)?$": false + + "^(ldo|dcdc)": + properties: + regulator-allow-bypass: false + - if: + properties: + compatible: + contains: + const: actions,atc2609a-regulator + then: + patternProperties: + "^(ldo1[1-2]|switchldo1)(-supply)?$": false + + "^(dcdc|ldo[3-9])": + properties: + regulator-allow-bypass: false + + required: + - compatible + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@65 { + compatible = "actions,atc2603c"; + reg = <0x65>; + interrupt-parent = <&sirq>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + + reset-time-sec = <6>; + + regulators { + compatible = "actions,atc2603c-regulator"; + + dcdc1-supply = <®_5v0>; + dcdc3-supply = <®_5v0>; + ldo5-supply = <®_5v0>; + switchldo1-supply = <&vcc>; + + vdd_cpu: dcdc1 { + regulator-name = "VDD_CPU"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + vcc: dcdc3 { + regulator-name = "VCC"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_3v1: ldo5 { + regulator-name = "VCC_3V1"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + + sd_vcc: switchldo1 { + regulator-name = "SD_VCC"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml new file mode 100644 index 000000000000..c7895b2c38c9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77540/MAX77541 PMIC from ADI + +maintainers: + - Okan Sahin <okan.sahin@analog.com> + +description: | + MAX77540 is a Power Management IC with 2 buck regulators. + + MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC. + +properties: + compatible: + enum: + - adi,max77540 + - adi,max77541 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + $ref: /schemas/regulator/adi,max77541-regulator.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "adi,max77541"; + reg = <0x69>; + interrupt-parent = <&gpio>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <5200000>; + regulator-boot-on; + regulator-always-on; + }; + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <5200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml index 39afacc447b2..93f5065a6280 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings +title: Allwinner A10 Resistive Touchscreen Controller maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -31,19 +31,19 @@ properties: description: A touchscreen is attached to the controller allwinner,tp-sensitive-adjust: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 15 - default: 15 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 15 + description: Sensitivity of pen down detection allwinner,filter-type: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 1 + description: | Select median and averaging filter. Sample used for median / averaging filter: diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml index d131759ccaf3..8789e3639ff7 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/allwinner,sun6i-a31-prcm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A31 PRCM Device Tree Bindings +title: Allwinner A31 PRCM maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -22,6 +22,7 @@ properties: patternProperties: "^.*_(clk|rst)$": type: object + unevaluatedProperties: false properties: compatible: @@ -33,20 +34,51 @@ patternProperties: - allwinner,sun6i-a31-clock-reset - fixed-factor-clock + required: + - compatible + allOf: - if: properties: compatible: contains: - const: allwinner,sun6i-a31-apb0-clk + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + + - if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-mod0-clk then: properties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true + clocks: + maxItems: 2 + + clock-output-names: + maxItems: 1 + + required: + - "#clock-cells" + - clocks + - clock-output-names + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-apb0-clk + + then: + properties: + "#clock-cells": + const: 0 clocks: maxItems: 1 @@ -54,16 +86,11 @@ patternProperties: clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -79,9 +106,6 @@ patternProperties: offset of the bit controlling this particular gate in the register. - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 @@ -89,16 +113,11 @@ patternProperties: minItems: 1 maxItems: 32 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -110,9 +129,6 @@ patternProperties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true - clocks: maxItems: 4 description: > @@ -122,16 +138,11 @@ patternProperties: clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -143,16 +154,8 @@ patternProperties: "#reset-cells": const: 1 - # Already checked in the main schema - compatible: true - - phandle: true - required: - "#reset-cells" - - compatible - - additionalProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml index aa5e683b236c..e51f85519911 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/allwinner,sun8i-a23-prcm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A23 PRCM Device Tree Bindings +title: Allwinner A23 PRCM maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -22,6 +22,7 @@ properties: patternProperties: "^.*(clk|rst|codec).*$": type: object + unevaluatedProperties: false properties: compatible: @@ -40,6 +41,15 @@ patternProperties: properties: compatible: contains: + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + + - if: + properties: + compatible: + contains: const: allwinner,sun8i-a23-apb0-clk then: @@ -47,25 +57,17 @@ patternProperties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -81,9 +83,6 @@ patternProperties: offset of the bit controlling this particular gate in the register. - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 @@ -91,16 +90,11 @@ patternProperties: minItems: 1 maxItems: 32 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -112,34 +106,8 @@ patternProperties: "#reset-cells": const: 1 - # Already checked in the main schema - compatible: true - - phandle: true - required: - "#reset-cells" - - compatible - - additionalProperties: false - - - if: - properties: - compatible: - contains: - const: allwinner,sun8i-a23-codec-analog - - then: - properties: - # Already checked in the main schema - compatible: true - - phandle: true - - required: - - compatible - - additionalProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml b/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml new file mode 100644 index 000000000000..c442c3cdffed --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ampere,smpro.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ampere Altra SMPro firmware driver + +maintainers: + - Quan Nguyen <quan@os.amperecomputing.com> + +description: | + Ampere Altra SMPro firmware may contain different blocks like hardware + monitoring, error monitoring and other miscellaneous features. + +properties: + compatible: + enum: + - ampere,smpro + + reg: + description: + I2C device address. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + smpro@4f { + compatible = "ampere,smpro"; + reg = <0x4f>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ams,as3711.yaml b/Documentation/devicetree/bindings/mfd/ams,as3711.yaml new file mode 100644 index 000000000000..ad8649cbb2cc --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ams,as3711.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ams,as3711.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Austria MicroSystems AS3711 Quad Buck High Current PMIC with Charger + +maintainers: + - Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> + +description: + AS3711 is an I2C PMIC from Austria MicroSystems with multiple DC/DC and LDO + power supplies, a battery charger and an RTC. So far only bindings for the + two step-up DC/DC converters are defined. + +properties: + compatible: + const: ams,as3711 + + reg: + maxItems: 1 + + backlight: + description: + Step-up converter configuration, to be used as a backlight source + type: object + additionalProperties: false + properties: + compatible: + const: ams,as3711-bl + + su1-dev: + description: Framebuffer phandle for the first step-up converter + $ref: /schemas/types.yaml#/definitions/phandle + + su1-max-uA: + description: Maximum current for the first step-up converter + $ref: /schemas/types.yaml#/definitions/uint32 + + su2-dev: + description: Framebuffer phandle for the second step-up converter + $ref: /schemas/types.yaml#/definitions/phandle + + su2-max-uA: + description: Maximum current for the second step-up converter + $ref: /schemas/types.yaml#/definitions/uint32 + + su2-feedback-voltage: + description: Second step-up converter uses voltage feedback + type: boolean + + su2-feedback-curr1: + description: + Second step-up converter uses CURR1 input for current feedback + type: boolean + + su2-feedback-curr2: + description: + Second step-up converter uses CURR2 input for current feedback + type: boolean + + su2-feedback-curr3: + description: + Second step-up converter uses CURR3 input for current feedback + type: boolean + + su2-feedback-curr-auto: + description: + Second step-up converter uses automatic current feedback selection + type: boolean + + su2-fbprot-lx-sd4: + description: + Second step-up converter uses LX_SD4 for over-voltage protection + type: boolean + + su2-fbprot-gpio2: + description: + Second step-up converter uses GPIO2 for over-voltage protection + type: boolean + + su2-fbprot-gpio3: + description: + Second step-up converter uses GPIO3 for over-voltage protection + type: boolean + + su2-fbprot-gpio4: + description: + Second step-up converter uses GPIO4 for over-voltage protection + type: boolean + + su2-auto-curr1: + description: + Second step-up converter uses CURR1 input for automatic current + feedback + type: boolean + + su2-auto-curr2: + description: + Second step-up converter uses CURR2 input for automatic current + feedback + type: boolean + + su2-auto-curr3: + description: + Second step-up converter uses CURR3 input for automatic current + feedback + type: boolean + + required: + - compatible + + dependentRequired: + # To use the SU1 converter as a backlight source the following two + # properties must be provided: + su1-dev: [ su1-max-uA ] + su1-max-uA: [ su1-dev ] + + # To use the SU2 converter as a backlight source the following two + # properties must be provided: + su2-dev: [ su2-max-uA ] + su2-max-uA: [ su2-dev ] + + su2-feedback-voltage: [ su2-dev ] + su2-feedback-curr1: [ su2-dev ] + su2-feedback-curr2: [ su2-dev ] + su2-feedback-curr3: [ su2-dev ] + su2-feedback-curr-auto: [ su2-dev ] + su2-fbprot-lx-sd4: [ su2-dev ] + su2-fbprot-gpio2: [ su2-dev ] + su2-fbprot-gpio3: [ su2-dev ] + su2-fbprot-gpio4: [ su2-dev ] + su2-auto-curr1: [ su2-feedback-curr-auto ] + su2-auto-curr2: [ su2-feedback-curr-auto ] + su2-auto-curr3: [ su2-feedback-curr-auto ] + + dependentSchemas: + su2-dev: + allOf: + - oneOf: + - required: + - su2-feedback-voltage + - required: + - su2-feedback-curr1 + - required: + - su2-feedback-curr2 + - required: + - su2-feedback-curr3 + - required: + - su2-feedback-curr-auto + - oneOf: + - required: + - su2-fbprot-lx-sd4 + - required: + - su2-fbprot-gpio2 + - required: + - su2-fbprot-gpio3 + - required: + - su2-fbprot-gpio4 + + su2-feedback-curr-auto: + anyOf: + - required: + - su2-auto-curr1 + - required: + - su2-auto-curr2 + - required: + - su2-auto-curr3 + + regulators: + description: Other DC/DC and LDO supplies + type: object + unevaluatedProperties: false + patternProperties: + "^(sd[1-4]|ldo[1-8])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + + backlight { + compatible = "ams,as3711-bl"; + su2-dev = <&lcdc>; + su2-max-uA = <36000>; + su2-feedback-curr-auto; + su2-fbprot-gpio4; + su2-auto-curr1; + su2-auto-curr2; + su2-auto-curr3; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt deleted file mode 100644 index 148ef621a5e5..000000000000 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ /dev/null @@ -1,101 +0,0 @@ -Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs - -These devices are audio SoCs with extensive digital capabilities and a range -of analogue I/O. - -Required properties: - - - compatible : One of the following chip-specific strings: - "cirrus,cs47l24" - "wlf,wm5102" - "wlf,wm5110" - "wlf,wm8280" - "wlf,wm8997" - "wlf,wm8998" - "wlf,wm1814" - "wlf,wm1831" - - - reg : I2C slave address when connected using I2C, chip select number when - using SPI. - - - interrupts : The interrupt line the /IRQ signal for the device is - connected to. - - interrupt-controller : Arizona class devices contain interrupt controllers - and may provide interrupt services to other devices. - - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. - The first cell is the IRQ number. - The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - - gpio-controller : Indicates this device is a GPIO controller. - - #gpio-cells : Must be 2. The first cell is the pin number and the - second cell is used to specify optional parameters, see ../gpio/gpio.txt - for details. - - - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device, - as covered in Documentation/devicetree/bindings/regulator/regulator.txt - - - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102, - wm5110, wm8280, wm8998, wm1814) - - - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102, - wm5110, wm8280, wm8998, wm1814) - - - SPKVDD-supply : Speaker driver power supply (wm8997) - - - DCVDD-supply : Main power supply (cs47l24, wm1831) - - - MICVDD-supply : Microphone power supply (cs47l24, wm1831) - -Optional properties: - - - reset-gpios : GPIO specifier for the GPIO controlling /RESET - - - clocks: Should reference the clocks supplied on MCLK1 and MCLK2 - - clock-names: Should contains two strings: - "mclk1" for the clock supplied on MCLK1, recommended to be a high - quality audio reference clock - "mclk2" for the clock supplied on MCLK2, recommended to be an always on - 32k clock - - - wlf,gpio-defaults : A list of GPIO configuration register values. Defines - for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If - absent, no configuration of these registers is performed. If any entry has - a value that is out of range for a 16 bit register then the chip default - will be used. If present exactly five values must be specified. - - - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if - they are being externally supplied. As covered in - Documentation/devicetree/bindings/regulator/regulator.txt - (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814) - -Deprecated properties: - - - wlf,reset : GPIO specifier for the GPIO controlling /RESET - -Also see child specific device properties: - Regulator - ../regulator/arizona-regulator.txt - Extcon - ../extcon/extcon-arizona.txt - Sound - ../sound/wlf,arizona.txt - -Example: - -codec: wm5102@1a { - compatible = "wlf,wm5102"; - reg = <0x1a>; - interrupts = <347>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - - gpio-controller; - #gpio-cells = <2>; - - wlf,gpio-defaults = < - ARIZONA_GP_FN_TXLRCLK - ARIZONA_GP_DEFAULT - ARIZONA_GP_DEFAULT - ARIZONA_GP_DEFAULT - ARIZONA_GP_DEFAULT - >; -}; diff --git a/Documentation/devicetree/bindings/mfd/arm,dev-platforms-syscon.yaml b/Documentation/devicetree/bindings/mfd/arm,dev-platforms-syscon.yaml new file mode 100644 index 000000000000..46b164ae0831 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/arm,dev-platforms-syscon.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/arm,dev-platforms-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Ltd Developer Platforms System Controllers + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + The Arm Ltd Integrator, Realview, and Versatile families of developer + platforms are contain various system controller blocks. Often these blocks + are part of a daughterboard or motherboard module. + +properties: + compatible: + oneOf: + - items: + - enum: + - arm,integrator-ap-syscon + - arm,integrator-cp-syscon + - arm,integrator-sp-syscon + - arm,im-pd1-syscon + - const: syscon + - items: + - enum: + - arm,core-module-integrator + - arm,integrator-ap-syscon + - arm,integrator-cp-syscon + - arm,integrator-sp-syscon + - arm,realview-eb-syscon + - arm,realview-pb1176-syscon + - arm,realview-pb11mp-syscon + - arm,realview-pba8-syscon + - arm,realview-pbx-syscon + - arm,versatile-ib2-syscon + - const: syscon + - const: simple-mfd + - items: + - enum: + - arm,realview-eb11mp-revb-syscon + - arm,realview-eb11mp-revc-syscon + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +... diff --git a/Documentation/devicetree/bindings/mfd/as3711.txt b/Documentation/devicetree/bindings/mfd/as3711.txt deleted file mode 100644 index d98cf18c721c..000000000000 --- a/Documentation/devicetree/bindings/mfd/as3711.txt +++ /dev/null @@ -1,73 +0,0 @@ -AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power -supplies, a battery charger and an RTC. So far only bindings for the two stepup -DCDC converters are defined. Other DCDC and LDO supplies are configured, using -standard regulator properties, they must belong to a sub-node, called -"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter -configuration should be placed in a subnode, called "backlight." - -Compulsory properties: -- compatible : must be "ams,as3711" -- reg : specifies the I2C address - -To use the SU1 converter as a backlight source the following two properties must -be provided: -- su1-dev : framebuffer phandle -- su1-max-uA : maximum current - -To use the SU2 converter as a backlight source the following two properties must -be provided: -- su2-dev : framebuffer phandle -- su1-max-uA : maximum current - -Additionally one of these properties must be provided to select the type of -feedback used: -- su2-feedback-voltage : voltage feedback is used -- su2-feedback-curr1 : CURR1 input used for current feedback -- su2-feedback-curr2 : CURR2 input used for current feedback -- su2-feedback-curr3 : CURR3 input used for current feedback -- su2-feedback-curr-auto: automatic current feedback selection - -and one of these to select the over-voltage protection pin -- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection -- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection -- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection -- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection - -If "su2-feedback-curr-auto" is selected, one or more of the following properties -have to be specified: -- su2-auto-curr1 : use CURR1 input for current feedback -- su2-auto-curr2 : use CURR2 input for current feedback -- su2-auto-curr3 : use CURR3 input for current feedback - -Example: - -as3711@40 { - compatible = "ams,as3711"; - reg = <0x40>; - - regulators { - sd4 { - regulator-name = "1.215V"; - regulator-min-microvolt = <1215000>; - regulator-max-microvolt = <1235000>; - }; - ldo2 { - regulator-name = "2.8V CPU"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - }; - - backlight { - compatible = "ams,as3711-bl"; - su2-dev = <&lcdc>; - su2-max-uA = <36000>; - su2-feedback-curr-auto; - su2-fbprot-gpio4; - su2-auto-curr1; - su2-auto-curr2; - su2-auto-curr3; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml new file mode 100644 index 000000000000..1689b986f441 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed System Control Unit + +description: + The Aspeed System Control Unit manages the global behaviour of the SoC, + configuring elements such as clocks, pinmux, and reset. + +maintainers: + - Joel Stanley <joel@jms.id.au> + - Andrew Jeffery <andrew@aj.id.au> + +properties: + compatible: + items: + - enum: + - aspeed,ast2400-scu + - aspeed,ast2500-scu + - aspeed,ast2600-scu + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +patternProperties: + '^p2a-control@[0-9a-f]+$': + description: See Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt + type: object + + '^pinctrl(@[0-9a-f]+)?$': + oneOf: + - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml + - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml + - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml + + '^interrupt-controller@[0-9a-f]+$': + description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt + type: object + + '^silicon-id@[0-9a-f]+$': + description: Unique hardware silicon identifiers within the SoC + type: object + additionalProperties: false + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-silicon-id + - aspeed,ast2500-silicon-id + - aspeed,ast2600-silicon-id + - const: aspeed,silicon-id + + reg: + description: + The reg should be the unique silicon id register, and not backwards + compatible one in eg. the 2600. + minItems: 1 + items: + - description: silicon id information registers + - description: unique chip id registers + +required: + - compatible + - reg + - ranges + - '#address-cells' + - '#size-cells' + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + syscon@1e6e2000 { + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e6e2000 0x1000>; + + silicon-id@7c { + compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id"; + reg = <0x7c 0x4>, <0x150 0x8>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt deleted file mode 100644 index 86446074e206..000000000000 --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt +++ /dev/null @@ -1,201 +0,0 @@ -====================================================================== -Device tree bindings for the Aspeed Low Pin Count (LPC) Bus Controller -====================================================================== - -The LPC bus is a means to bridge a host CPU to a number of low-bandwidth -peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The -primary use case of the Aspeed LPC controller is as a slave on the bus -(typically in a Baseboard Management Controller SoC), but under certain -conditions it can also take the role of bus master. - -The LPC controller is represented as a multi-function device to account for the -mix of functionality it provides. The principle split is between the register -layout at the start of the I/O space which is, to quote the Aspeed datasheet, -"basically compatible with the [LPC registers from the] popular BMC controller -H8S/2168[1]", and everything else, where everything else is an eclectic -collection of functions with a esoteric register layout. "Everything else", -here labeled the "host" portion of the controller, includes, but is not limited -to: - -* An IPMI Block Transfer[2] Controller - -* An LPC Host Controller: Manages LPC functions such as host vs slave mode, the - physical properties of some LPC pins, configuration of serial IRQs, and - APB-to-LPC bridging amonst other functions. - -* An LPC Host Interface Controller: Manages functions exposed to the host such - as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART - management and bus snoop configuration. - -* A set of SuperIO[3] scratch registers: Enables implementation of e.g. custom - hardware management protocols for handover between the host and baseboard - management controller. - -Additionally the state of the LPC controller influences the pinmux -configuration, therefore the host portion of the controller is exposed as a -syscon as a means to arbitrate access. - -[0] http://www.intel.com/design/chipsets/industry/25128901.pdf -[1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4 -[2] http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf -[3] https://en.wikipedia.org/wiki/Super_I/O - -Required properties -=================== - -- compatible: One of: - "aspeed,ast2400-lpc", "simple-mfd" - "aspeed,ast2500-lpc", "simple-mfd" - -- reg: contains the physical address and length values of the Aspeed - LPC memory region. - -- #address-cells: <1> -- #size-cells: <1> -- ranges: Maps 0 to the physical address and length of the LPC memory - region - -Required LPC Child nodes -======================== - -BMC Node --------- - -- compatible: One of: - "aspeed,ast2400-lpc-bmc" - "aspeed,ast2500-lpc-bmc" - -- reg: contains the physical address and length values of the - H8S/2168-compatible LPC controller memory region - -Host Node ---------- - -- compatible: One of: - "aspeed,ast2400-lpc-host", "simple-mfd", "syscon" - "aspeed,ast2500-lpc-host", "simple-mfd", "syscon" - -- reg: contains the address and length values of the host-related - register space for the Aspeed LPC controller - -- #address-cells: <1> -- #size-cells: <1> -- ranges: Maps 0 to the address and length of the host-related LPC memory - region - -Example: - -lpc: lpc@1e789000 { - compatible = "aspeed,ast2500-lpc", "simple-mfd"; - reg = <0x1e789000 0x1000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x1e789000 0x1000>; - - lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2500-lpc-bmc"; - reg = <0x0 0x80>; - }; - - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; - }; -}; - -BMC Node Children -================== - - -Host Node Children -================== - -LPC Host Interface Controller -------------------- - -The LPC Host Interface Controller manages functions exposed to the host such as -LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART -management and bus snoop configuration. - -Required properties: - -- compatible: One of: - "aspeed,ast2400-lpc-ctrl"; - "aspeed,ast2500-lpc-ctrl"; - -- reg: contains offset/length values of the host interface controller - memory regions - -- clocks: contains a phandle to the syscon node describing the clocks. - There should then be one cell representing the clock to use - -Optional properties: - -- memory-region: A phandle to a reserved_memory region to be used for the LPC - to AHB mapping - -- flash: A phandle to the SPI flash controller containing the flash to - be exposed over the LPC to AHB mapping - -Example: - -lpc-host@80 { - lpc_ctrl: lpc-ctrl@0 { - compatible = "aspeed,ast2500-lpc-ctrl"; - reg = <0x0 0x80>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - memory-region = <&flash_memory>; - flash = <&spi>; - }; -}; - -LPC Host Controller -------------------- - -The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour -between the host and the baseboard management controller. The registers exist -in the "host" portion of the Aspeed LPC controller, which must be the parent of -the LPC host controller node. - -Required properties: - -- compatible: One of: - "aspeed,ast2400-lhc"; - "aspeed,ast2500-lhc"; - -- reg: contains offset/length values of the LHC memory regions. In the - AST2400 and AST2500 there are two regions. - -Example: - -lhc: lhc@20 { - compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24 0x48 0x8>; -}; - -LPC reset control ------------------ - -The UARTs present in the ASPEED SoC can have their resets tied to the reset -state of the LPC bus. Some systems may chose to modify this configuration. - -Required properties: - - - compatible: "aspeed,ast2500-lpc-reset" or - "aspeed,ast2400-lpc-reset" - - reg: offset and length of the IP in the LHC memory region - - #reset-controller indicates the number of reset cells expected - -Example: - -lpc_reset: reset-controller@18 { - compatible = "aspeed,ast2500-lpc-reset"; - reg = <0x18 0x4>; - #reset-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml new file mode 100644 index 000000000000..5dfe77aca167 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# # Copyright (c) 2021 Aspeed Tehchnology Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed Low Pin Count (LPC) Bus Controller + +maintainers: + - Andrew Jeffery <andrew@aj.id.au> + - Chia-Wei Wang <chiawei_wang@aspeedtech.com> + +description: + The LPC bus is a means to bridge a host CPU to a number of low-bandwidth + peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The + primary use case of the Aspeed LPC controller is as a slave on the bus + (typically in a Baseboard Management Controller SoC), but under certain + conditions it can also take the role of bus master. + + The LPC controller is represented as a multi-function device to account for the + mix of functionality, which includes, but is not limited to + + * An IPMI Block Transfer[2] Controller + + * An LPC Host Interface Controller manages functions exposed to the host such + as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART + management and bus snoop configuration. + + * A set of SuperIO[3] scratch registers enabling implementation of e.g. custom + hardware management protocols for handover between the host and baseboard + management controller. + + Additionally the state of the LPC controller influences the pinmux + configuration, therefore the host portion of the controller is exposed as a + syscon as a means to arbitrate access. + +properties: + compatible: + items: + - enum: + - aspeed,ast2400-lpc-v2 + - aspeed,ast2500-lpc-v2 + - aspeed,ast2600-lpc-v2 + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^lpc-ctrl@[0-9a-f]+$": + type: object + additionalProperties: false + + description: | + The LPC Host Interface Controller manages functions exposed to the host such as + LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management + and bus snoop configuration. + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-lpc-ctrl + - aspeed,ast2500-lpc-ctrl + - aspeed,ast2600-lpc-ctrl + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + memory-region: + maxItems: 1 + description: handle to memory reservation for the LPC to AHB mapping region + + flash: + $ref: /schemas/types.yaml#/definitions/phandle + description: The SPI flash controller containing the flash to be exposed over the LPC to AHB mapping + + required: + - compatible + - clocks + + "^reset-controller@[0-9a-f]+$": + type: object + additionalProperties: false + + description: + The UARTs present in the ASPEED SoC can have their resets tied to the reset + state of the LPC bus. Some systems may chose to modify this configuration + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-lpc-reset + - aspeed,ast2500-lpc-reset + - aspeed,ast2600-lpc-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + + required: + - compatible + - '#reset-cells' + + "^lpc-snoop@[0-9a-f]+$": + type: object + additionalProperties: false + + description: + The LPC snoop interface allows the BMC to listen on and record the data + bytes written by the Host to the targeted LPC I/O pots. + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-lpc-snoop + - aspeed,ast2500-lpc-snoop + - aspeed,ast2600-lpc-snoop + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + snoop-ports: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: The LPC I/O ports to snoop + + required: + - compatible + - interrupts + - snoop-ports + + "^uart-routing@[0-9a-f]+$": + $ref: /schemas/soc/aspeed/uart-routing.yaml# + description: The UART routing control under LPC register space + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/ast2600-clock.h> + + lpc: lpc@1e789000 { + compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_ctrl: lpc-ctrl@80 { + compatible = "aspeed,ast2600-lpc-ctrl"; + reg = <0x80 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + memory-region = <&flash_memory>; + flash = <&spi>; + }; + + lpc_reset: reset-controller@98 { + compatible = "aspeed,ast2600-lpc-reset"; + reg = <0x98 0x4>; + #reset-cells = <1>; + }; + + lpc_snoop: lpc-snoop@90 { + compatible = "aspeed,ast2600-lpc-snoop"; + reg = <0x90 0x8>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + snoop-ports = <0x80>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt deleted file mode 100644 index 4d92c0bb6687..000000000000 --- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt +++ /dev/null @@ -1,22 +0,0 @@ -The Aspeed System Control Unit manages the global behaviour of the SoC, -configuring elements such as clocks, pinmux, and reset. - -Required properties: -- compatible: One of: - "aspeed,ast2400-scu", "syscon", "simple-mfd" - "aspeed,ast2500-scu", "syscon", "simple-mfd" - -- reg: contains the offset and length of the SCU memory region -- #clock-cells: should be set to <1> - the system controller is also a - clock provider -- #reset-cells: should be set to <1> - the system controller is also a - reset line provider - -Example: - -syscon: syscon@1e6e2000 { - compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; - reg = <0x1e6e2000 0x1a8>; - #clock-cells = <1>; - #reset-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt index 692300117c64..af692e8833a5 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt @@ -6,6 +6,7 @@ at boot time according to the device tree. Required properties: - compatible: Should be "atmel,sama5d2-flexcom" + or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom" - reg: Should be the offset/length value for Flexcom dedicated I/O registers (without USART, TWI or SPI registers). - clocks: Should be the Flexcom peripheral clock from PMC. @@ -54,7 +55,7 @@ flexcom@f8034000 { clock-names = "spi_clk"; atmel,fifo-size = <32>; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at25f512b"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt index e8c525569f10..3c989d1760a2 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt @@ -6,6 +6,7 @@ Required properties: - compatible: Should be one of the following: "atmel,at91sam9260-gpbr", "syscon" "microchip,sam9x60-gpbr", "syscon" + "microchip,sam9x7-gpbr", "microchip,sam9x60-gpbr", "syscon" - reg: contains offset/length value of the GPBR memory region. diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt index 5f8880cc757e..7de696eefaed 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt @@ -8,6 +8,7 @@ Required properties: "atmel,sama5d3-hlcdc" "atmel,sama5d4-hlcdc" "microchip,sam9x60-hlcdc" + "microchip,sam9x75-xlcdc" - reg: base address and size of the HLCDC device registers. - clock-names: the name of the 3 clocks requested by the HLCDC device. Should contain "periph_clk", "sys_clk" and "slow_clk". diff --git a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt index 89d05c64fb01..6e5f83614e83 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt @@ -14,6 +14,7 @@ Required properties: "atmel,at91sam9x5-matrix", "syscon" "atmel,sama5d3-matrix", "syscon" "microchip,sam9x60-matrix", "syscon" + "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon" - reg: Contains offset/length value of the Bus Matrix memory region. diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt index 5696d9fcb5dc..fd62add38a79 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt @@ -10,6 +10,7 @@ Required properties: "atmel,sama5d3-smc", "syscon" "atmel,sama5d2-smc", "syscon" "microchip,sam9x60-smc", "syscon" + "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon" - reg: Contains offset/length value of the SMC memory region. diff --git a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt deleted file mode 100644 index c4a83e364cb6..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Device tree bindings for Atmel Timer Counter Blocks -- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon". - <chip> can be "at91rm9200" or "at91sam9x5" -- reg: Should contain registers location and length -- #address-cells: has to be 1 -- #size-cells: has to be 0 -- interrupts: Should contain all interrupts for the TC block - Note that you can specify several interrupt cells if the TC - block has one interrupt per channel. -- clock-names: tuple listing input clock names. - Required elements: "t0_clk", "slow_clk" - Optional elements: "t1_clk", "t2_clk" -- clocks: phandles to input clocks. - -The TCB can expose multiple subdevices: - * a timer - - compatible: Should be "atmel,tcb-timer" - - reg: Should contain the TCB channels to be used. If the - counter width is 16 bits (at91rm9200-tcb), two consecutive - channels are needed. Else, only one channel will be used. - -Examples: - -One interrupt per TC block: - tcb0: timer@fff7c000 { - compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xfff7c000 0x100>; - interrupts = <18 4>; - clocks = <&tcb0_clk>, <&clk32k>; - clock-names = "t0_clk", "slow_clk"; - - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - -One interrupt per TC channel in a TC block: - tcb1: timer@fffdc000 { - compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xfffdc000 0x100>; - interrupts = <26 4>, <27 4>, <28 4>; - clocks = <&tcb1_clk>, <&clk32k>; - clock-names = "t0_clk", "slow_clk"; - }; - - diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt deleted file mode 100644 index a09133066aff..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ /dev/null @@ -1,98 +0,0 @@ -* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) - -Required properties for USART: -- compatible: Should be one of the following: - - "atmel,at91rm9200-usart" - - "atmel,at91sam9260-usart" - - "microchip,sam9x60-usart" - - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" - - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" - - "microchip,sam9x60-dbgu", "microchip,sam9x60-usart" -- reg: Should contain registers location and length -- interrupts: Should contain interrupt -- clock-names: tuple listing input clock names. - Required elements: "usart" -- clocks: phandles to input clocks. - -Required properties for USART in SPI mode: -- #size-cells : Must be <0> -- #address-cells : Must be <1> -- cs-gpios: chipselects (internal cs not supported) -- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h) - -Optional properties in serial and SPI mode: -- dma bindings for dma transfer: - - dmas: DMA specifier, consisting of a phandle to DMA controller node, - memory peripheral interface and USART DMA channel ID, FIFO configuration. - The order of DMA channels is fixed. The first DMA channel must be TX - associated channel and the second one must be RX associated channel. - Refer to dma.txt and atmel-dma.txt for details. - - dma-names: "tx" for TX channel. - "rx" for RX channel. - The order of dma-names is also fixed. The first name must be "tx" - and the second one must be "rx" as in the examples below. - -Optional properties in serial mode: -- atmel,use-dma-rx: use of PDC or DMA for receiving data -- atmel,use-dma-tx: use of PDC or DMA for transmitting data -- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively. - It will use specified PIO instead of the peripheral function pin for the USART feature. - If unsure, don't specify this property. -- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO - capable USARTs. -- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt - -<chip> compatible description: -- at91rm9200: legacy USART support -- at91sam9260: generic USART implementation for SAM9 SoCs - -Example: -- use PDC: - usart0: serial@fff8c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfff8c000 0x4000>; - interrupts = <7>; - clocks = <&usart0_clk>; - clock-names = "usart"; - atmel,use-dma-rx; - atmel,use-dma-tx; - rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>; - cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>; - dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>; - dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>; - dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>; - rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>; - }; - -- use DMA: - usart0: serial@f001c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xf001c000 0x100>; - interrupts = <12 4 5>; - clocks = <&usart0_clk>; - clock-names = "usart"; - atmel,use-dma-rx; - atmel,use-dma-tx; - dmas = <&dma0 2 0x3>, - <&dma0 2 0x204>; - dma-names = "tx", "rx"; - atmel,fifo-size = <32>; - }; - -- SPI mode: - #include <dt-bindings/mfd/at91-usart.h> - - spi0: spi@f001c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart"; - atmel,usart-mode = <AT91_USART_MODE_SPI>; - reg = <0xf001c000 0x100>; - interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&usart0_clk>; - clock-names = "usart"; - dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, - <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; - dma-names = "tx", "rx"; - cs-gpios = <&pioB 3 0>; - }; diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt deleted file mode 100644 index 4991a6415796..000000000000 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ /dev/null @@ -1,272 +0,0 @@ -AXP family PMIC device tree bindings - -The axp20x family current members : -axp152 (X-Powers) -axp202 (X-Powers) -axp209 (X-Powers) -axp221 (X-Powers) -axp223 (X-Powers) -axp803 (X-Powers) -axp806 (X-Powers) -axp809 (X-Powers) -axp813 (X-Powers) - -The AXP813 is 2 chips packaged into 1. The 2 chips do not share anything -other than the packaging. Pins are routed separately. As such they should -be treated as separate entities. The other half is an AC100 RTC/codec -combo chip. Please see ./ac100.txt for its bindings. - -Required properties: -- compatible: should be one of: - * "x-powers,axp152" - * "x-powers,axp202" - * "x-powers,axp209" - * "x-powers,axp221" - * "x-powers,axp223" - * "x-powers,axp803" - * "x-powers,axp806" - * "x-powers,axp805", "x-powers,axp806" - * "x-powers,axp809" - * "x-powers,axp813" -- reg: The I2C slave address or RSB hardware address for the AXP chip -- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin -- interrupt-controller: The PMIC has its own internal IRQs -- #interrupt-cells: Should be set to 1 - -Supported common regulator properties, see ../regulator/regulator.txt for -more information: -- regulator-ramp-delay: sets the ramp up delay in uV/us - AXP20x/DCDC2: 1600, 800 - AXP20x/LDO3: 1600, 800 -- regulator-soft-start: enable the output at the lowest possible voltage and - only then set the desired voltage - AXP20x/LDO3: software-based implementation - -Optional properties: -- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz - AXP152/20X: range: 750-1875, Default: 1.5 MHz - AXP22X/8XX: range: 1800-4050, Default: 3 MHz - -- x-powers,drive-vbus-en: boolean, set this when the N_VBUSEN pin is - used as an output pin to control an external - regulator to drive the OTG VBus, rather then - as an input pin which signals whether the - board is driving OTG VBus or not. - (axp221 / axp223 / axp803/ axp813 only) - -- x-powers,self-working-mode and - x-powers,master-mode: Boolean (axp806 only). Set either of these when the - PMIC is wired for self-working mode or master mode. - If neither is set then slave mode is assumed. - This corresponds to how the MODESET pin is wired. - -- <input>-supply: a phandle to the regulator supply node. May be omitted if - inputs are unregulated, such as using the IPSOUT output - from the PMIC. - -- regulators: A node that houses a sub-node for each regulator. Regulators - not used but preferred to be managed by the OS should be - listed as well. - See Documentation/devicetree/bindings/regulator/regulator.txt - for more information on standard regulator bindings. - -Optional properties for DCDC regulators: -- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO (PWM/PFM) mode - Default: Current hardware setting - The DCDC regulators work in a mixed PWM/PFM mode, - using PFM under light loads and switching to PWM - for heavier loads. Forcing PWM mode trades efficiency - under light loads for lower output noise. This - probably makes sense for HiFi audio related - applications that aren't battery constrained. - -AXP202/AXP209 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC2 : DC-DC buck : vin2-supply -DCDC3 : DC-DC buck : vin3-supply -LDO1 : LDO : acin-supply : always on -LDO2 : LDO : ldo24in-supply : shared supply -LDO3 : LDO : ldo3in-supply -LDO4 : LDO : ldo24in-supply : shared supply -LDO5 : LDO : ldo5in-supply - -AXP221/AXP223 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply -DCDC3 : DC-DC buck : vin3-supply -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply -DC1SW : On/Off Switch : : DCDC1 secondary output -DC5LDO : LDO : : input from DCDC5 -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -DLDO3 : LDO : dldoin-supply : shared supply -DLDO4 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -DRIVEVBUS : Enable output : drivevbus-supply : external regulator - -AXP803 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply : poly-phase capable -DCDC3 : DC-DC buck : vin3-supply : poly-phase capable -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply : poly-phase capable -DCDC6 : DC-DC buck : vin6-supply : poly-phase capable -DC1SW : On/Off Switch : : DCDC1 secondary output -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -DLDO3 : LDO : dldoin-supply : shared supply -DLDO4 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -FLDO1 : LDO : fldoin-supply : shared supply -FLDO2 : LDO : fldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -DRIVEVBUS : Enable output : drivevbus-supply : external regulator - -AXP806 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDCA : DC-DC buck : vina-supply : poly-phase capable -DCDCB : DC-DC buck : vinb-supply : poly-phase capable -DCDCC : DC-DC buck : vinc-supply : poly-phase capable -DCDCD : DC-DC buck : vind-supply : poly-phase capable -DCDCE : DC-DC buck : vine-supply : poly-phase capable -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -BLDO1 : LDO : bldoin-supply : shared supply -BLDO2 : LDO : bldoin-supply : shared supply -BLDO3 : LDO : bldoin-supply : shared supply -BLDO4 : LDO : bldoin-supply : shared supply -CLDO1 : LDO : cldoin-supply : shared supply -CLDO2 : LDO : cldoin-supply : shared supply -CLDO3 : LDO : cldoin-supply : shared supply -SW : On/Off Switch : swin-supply - -Additionally, the AXP806 DC-DC regulators support poly-phase arrangements -for higher output current. The possible groupings are: A+B, A+B+C, D+E. - -AXP809 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply -DCDC3 : DC-DC buck : vin3-supply -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply -DC1SW : On/Off Switch : : DCDC1 secondary output -DC5LDO : LDO : : input from DCDC5 -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -SW : On/Off Switch : swin-supply - -AXP813 regulators, type, and corresponding input supply names: - -Regulator Type Supply Name Notes ---------- ---- ----------- ----- -DCDC1 : DC-DC buck : vin1-supply -DCDC2 : DC-DC buck : vin2-supply : poly-phase capable -DCDC3 : DC-DC buck : vin3-supply : poly-phase capable -DCDC4 : DC-DC buck : vin4-supply -DCDC5 : DC-DC buck : vin5-supply : poly-phase capable -DCDC6 : DC-DC buck : vin6-supply : poly-phase capable -DCDC7 : DC-DC buck : vin7-supply -ALDO1 : LDO : aldoin-supply : shared supply -ALDO2 : LDO : aldoin-supply : shared supply -ALDO3 : LDO : aldoin-supply : shared supply -DLDO1 : LDO : dldoin-supply : shared supply -DLDO2 : LDO : dldoin-supply : shared supply -DLDO3 : LDO : dldoin-supply : shared supply -DLDO4 : LDO : dldoin-supply : shared supply -ELDO1 : LDO : eldoin-supply : shared supply -ELDO2 : LDO : eldoin-supply : shared supply -ELDO3 : LDO : eldoin-supply : shared supply -FLDO1 : LDO : fldoin-supply : shared supply -FLDO2 : LDO : fldoin-supply : shared supply -FLDO3 : LDO : fldoin-supply : shared supply -LDO_IO0 : LDO : ips-supply : GPIO 0 -LDO_IO1 : LDO : ips-supply : GPIO 1 -RTC_LDO : LDO : ips-supply : always on -SW : On/Off Switch : swin-supply -DRIVEVBUS : Enable output : drivevbus-supply : external regulator - -Example: - -axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - - regulators { - x-powers,dcdc-freq = <1500>; - - vdd_cpu: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd-cpu"; - }; - - vdd_int_dll: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; - }; - - vdd_rtc: ldo1 { - regulator-always-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-rtc"; - }; - - avcc: ldo2 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avcc"; - }; - - ldo3 { - /* unused but preferred to be managed by OS */ - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt deleted file mode 100644 index 8c4678650d1a..000000000000 --- a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt +++ /dev/null @@ -1,69 +0,0 @@ -* ROHM BD9571MWV Power Management Integrated Circuit (PMIC) bindings - -Required properties: - - compatible : Should be "rohm,bd9571mwv". - - reg : I2C slave address. - - interrupts : The interrupt line the device is connected to. - - interrupt-controller : Marks the device node as an interrupt controller. - - #interrupt-cells : The number of cells to describe an IRQ, should be 2. - The first cell is the IRQ number. - The second cell is the flags, encoded as trigger - masks from ../interrupt-controller/interrupts.txt. - - gpio-controller : Marks the device node as a GPIO Controller. - - #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../gpio/gpio.txt for more information. - - regulators: : List of child nodes that specify the regulator - initialization data. Child nodes must be named - after their hardware counterparts: - - vd09 - - vd18 - - vd25 - - vd33 - - dvfs - Each child node is defined using the standard - binding for regulators. - -Optional properties: - - rohm,ddr-backup-power : Value to use for DDR-Backup Power (default 0). - This is a bitmask that specifies which DDR power - rails need to be kept powered when backup mode is - entered, for system suspend: - - bit 0: DDR0 - - bit 1: DDR1 - - bit 2: DDR0C - - bit 3: DDR1C - These bits match the KEEPON_DDR* bits in the - documentation for the "BKUP Mode Cnt" register. - - rohm,rstbmode-level: The RSTB signal is configured for level mode, to - accommodate a toggle power switch (the RSTBMODE pin is - strapped low). - - rohm,rstbmode-pulse: The RSTB signal is configured for pulse mode, to - accommodate a momentary power switch (the RSTBMODE pin - is strapped high). - The two properties above are mutually exclusive. - -Example: - - pmic: pmic@30 { - compatible = "rohm,bd9571mwv"; - reg = <0x30>; - interrupt-parent = <&gpio2>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - rohm,ddr-backup-power = <0xf>; - rohm,rstbmode-pulse; - - regulators { - dvfs: dvfs { - regulator-name = "dvfs"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1030000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml new file mode 100644 index 000000000000..cb480162f967 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6318 GPIO System Controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6318 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6318-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: /schemas/pinctrl/brcm,bcm6318-pinctrl.yaml + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6318-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6318-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 50>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@10 { + compatible = "brcm,bcm6318-pinctrl"; + reg = <0x18 0x10>, <0x54 0x18>; + + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { + function = "ephy0_spd_led"; + pins = "gpio0"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { + function = "ephy1_spd_led"; + pins = "gpio1"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { + function = "ephy2_spd_led"; + pins = "gpio2"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { + function = "ephy3_spd_led"; + pins = "gpio3"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led-pins { + function = "ephy0_act_led"; + pins = "gpio4"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led-pins { + function = "ephy1_act_led"; + pins = "gpio5"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led-pins { + function = "ephy2_act_led"; + pins = "gpio6"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led-pins { + function = "ephy3_act_led"; + pins = "gpio7"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led-pins { + function = "inet_act_led"; + pins = "gpio8"; + }; + + pinctrl_inet_fail_led: inet_fail_led-pins { + function = "inet_fail_led"; + pins = "gpio9"; + }; + + pinctrl_dsl_led: dsl_led-pins { + function = "dsl_led"; + pins = "gpio10"; + }; + + pinctrl_post_fail_led: post_fail_led-pins { + function = "post_fail_led"; + pins = "gpio11"; + }; + + pinctrl_wlan_wps_led: wlan_wps_led-pins { + function = "wlan_wps_led"; + pins = "gpio12"; + }; + + pinctrl_usb_pwron: usb_pwron-pins { + function = "usb_pwron"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio13"; + }; + + pinctrl_usb_active: usb_active-pins { + function = "usb_active"; + pins = "gpio40"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml new file mode 100644 index 000000000000..9c2a04829da5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm63268-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM63268 GPIO System Controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM63268 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm63268-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: /schemas/pinctrl/brcm,bcm63268-pinctrl.yaml + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@100000c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm63268-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x100000c0 0x80>; + ranges = <0 0x100000c0 0x80>; + + gpio@0 { + compatible = "brcm,bcm63268-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 52>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@10 { + compatible = "brcm,bcm63268-pinctrl"; + reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio0"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio1"; + }; + }; + + pinctrl_hsspi_cs4: hsspi_cs4-pins { + function = "hsspi_cs4"; + pins = "gpio16"; + }; + + pinctrl_hsspi_cs5: hsspi_cs5-pins { + function = "hsspi_cs5"; + pins = "gpio17"; + }; + + pinctrl_hsspi_cs6: hsspi_cs6-pins { + function = "hsspi_cs6"; + pins = "gpio8"; + }; + + pinctrl_hsspi_cs7: hsspi_cs7-pins { + function = "hsspi_cs7"; + pins = "gpio9"; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio19"; + }; + }; + + pinctrl_vreq_clk: vreq_clk-pins { + function = "vreq_clk"; + pins = "gpio22"; + }; + + pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins { + function = "pcie_clkreq_b"; + pins = "gpio23"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio30"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio31"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + pins = "nand_grp"; + }; + + pinctrl_gpio35_alt: gpio35_alt-pins { + function = "gpio35_alt"; + pins = "gpio35"; + }; + + pinctrl_dectpd: dectpd-pins { + function = "dectpd"; + pins = "dectpd_grp"; + }; + + pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { + function = "vdsl_phy_override_0"; + pins = "vdsl_phy_override_0_grp"; + }; + + pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { + function = "vdsl_phy_override_1"; + pins = "vdsl_phy_override_1_grp"; + }; + + pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { + function = "vdsl_phy_override_2"; + pins = "vdsl_phy_override_2_grp"; + }; + + pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { + function = "vdsl_phy_override_3"; + pins = "vdsl_phy_override_3_grp"; + }; + + pinctrl_dsl_gpio8: dsl_gpio8-pins { + function = "dsl_gpio8"; + pins = "dsl_gpio8"; + }; + + pinctrl_dsl_gpio9: dsl_gpio9-pins { + function = "dsl_gpio9"; + pins = "dsl_gpio9"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml new file mode 100644 index 000000000000..5f48209ed40f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6328-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6328 GPIO System Controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6328 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6328-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: /schemas/pinctrl/brcm,bcm6328-pinctrl.yaml + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6328-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6328-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6328-pinctrl"; + reg = <0x18 0x10>; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led-pins { + function = "inet_act_led"; + pins = "gpio11"; + }; + + pinctrl_pcie_clkreq: pcie_clkreq-pins { + function = "pcie_clkreq"; + pins = "gpio16"; + }; + + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { + function = "led"; + pins = "gpio17"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { + function = "led"; + pins = "gpio18"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { + function = "led"; + pins = "gpio19"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { + function = "led"; + pins = "gpio20"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led-pins { + function = "ephy0_act_led"; + pins = "gpio25"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led-pins { + function = "ephy1_act_led"; + pins = "gpio26"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led-pins { + function = "ephy2_act_led"; + pins = "gpio27"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led-pins { + function = "ephy3_act_led"; + pins = "gpio28"; + }; + + pinctrl_hsspi_cs1: hsspi_cs1-pins { + function = "hsspi_cs1"; + pins = "hsspi_cs1"; + }; + + pinctrl_usb_port1_device: usb_port1_device-pins { + function = "usb_device_port"; + pins = "usb_port1"; + }; + + pinctrl_usb_port1_host: usb_port1_host-pins { + function = "usb_host_port"; + pins = "usb_port1"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml new file mode 100644 index 000000000000..f1f4629565d9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6358-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6358 GPIO System Controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6358 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6358-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: /schemas/pinctrl/brcm,bcm6358-pinctrl.yaml + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@fffe0080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6358-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0xfffe0080 0x80>; + ranges = <0 0xfffe0080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6358-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 40>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6358-pinctrl"; + reg = <0x18 0x4>; + + pinctrl_ebi_cs: ebi_cs-pins { + function = "ebi_cs"; + groups = "ebi_cs_grp"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + groups = "uart1_grp"; + }; + + pinctrl_serial_led: serial_led-pins { + function = "serial_led"; + groups = "serial_led_grp"; + }; + + pinctrl_legacy_led: legacy_led-pins { + function = "legacy_led"; + groups = "legacy_led_grp"; + }; + + pinctrl_led: led-pins { + function = "led"; + groups = "led_grp"; + }; + + pinctrl_spi_cs_23: spi_cs-pins { + function = "spi_cs"; + groups = "spi_cs_grp"; + }; + + pinctrl_utopia: utopia-pins { + function = "utopia"; + groups = "utopia_grp"; + }; + + pinctrl_pwm_syn_clk: pwm_syn_clk-pins { + function = "pwm_syn_clk"; + groups = "pwm_syn_clk_grp"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + groups = "sys_irq_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml new file mode 100644 index 000000000000..c2941638c8f2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml @@ -0,0 +1,236 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6362-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6362 GPIO System Controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6362 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6362-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: /schemas/pinctrl/brcm,bcm6362-pinctrl.yaml + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6362-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6362-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 48>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6362-pinctrl"; + reg = <0x18 0x10>, <0x38 0x4>; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio0"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + pins = "gpio1"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio2"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio3"; + }; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio4"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio5"; + }; + + pinctrl_robosw_led0: robosw_led0-pins { + function = "robosw_led0"; + pins = "gpio6"; + }; + + pinctrl_robosw_led1: robosw_led1-pins { + function = "robosw_led1"; + pins = "gpio7"; + }; + + pinctrl_inet_led: inet_led-pins { + function = "inet_led"; + pins = "gpio8"; + }; + + pinctrl_spi_cs2: spi_cs2-pins { + function = "spi_cs2"; + pins = "gpio9"; + }; + + pinctrl_spi_cs3: spi_cs3-pins { + function = "spi_cs3"; + pins = "gpio10"; + }; + + pinctrl_ntr_pulse: ntr_pulse-pins { + function = "ntr_pulse"; + pins = "gpio11"; + }; + + pinctrl_uart1_scts: uart1_scts-pins { + function = "uart1_scts"; + pins = "gpio12"; + }; + + pinctrl_uart1_srts: uart1_srts-pins { + function = "uart1_srts"; + pins = "gpio13"; + }; + + pinctrl_uart1: uart1-pins { + pinctrl_uart1_sdin: uart1_sdin-pins { + function = "uart1_sdin"; + pins = "gpio14"; + }; + + pinctrl_uart1_sdout: uart1_sdout-pins { + function = "uart1_sdout"; + pins = "gpio15"; + }; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio16"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio17"; + }; + + pinctrl_adsl_spi_clk: adsl_spi_clk-pins { + function = "adsl_spi_clk"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_cs: adsl_spi_cs-pins { + function = "adsl_spi_cs"; + pins = "gpio19"; + }; + }; + + pinctrl_ephy0_led: ephy0_led-pins { + function = "ephy0_led"; + pins = "gpio20"; + }; + + pinctrl_ephy1_led: ephy1_led-pins { + function = "ephy1_led"; + pins = "gpio21"; + }; + + pinctrl_ephy2_led: ephy2_led-pins { + function = "ephy2_led"; + pins = "gpio22"; + }; + + pinctrl_ephy3_led: ephy3_led-pins { + function = "ephy3_led"; + pins = "gpio23"; + }; + + pinctrl_ext_irq0: ext_irq0-pins { + function = "ext_irq0"; + pins = "gpio24"; + }; + + pinctrl_ext_irq1: ext_irq1-pins { + function = "ext_irq1"; + pins = "gpio25"; + }; + + pinctrl_ext_irq2: ext_irq2-pins { + function = "ext_irq2"; + pins = "gpio26"; + }; + + pinctrl_ext_irq3: ext_irq3-pins { + function = "ext_irq3"; + pins = "gpio27"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + pins = "nand_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml new file mode 100644 index 000000000000..44e77d77d314 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml @@ -0,0 +1,246 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6368 GPIO System Controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6368 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6368-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: /schemas/pinctrl/brcm,bcm6368-pinctrl.yaml + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6368-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6368-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 38>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6368-pinctrl"; + reg = <0x18 0x4>, <0x38 0x4>; + + pinctrl_analog_afe_0: analog_afe_0-pins { + function = "analog_afe_0"; + pins = "gpio0"; + }; + + pinctrl_analog_afe_1: analog_afe_1-pins { + function = "analog_afe_1"; + pins = "gpio1"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + pins = "gpio2"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio3"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio4"; + }; + }; + + pinctrl_inet_led: inet_led-pins { + function = "inet_led"; + pins = "gpio5"; + }; + + pinctrl_ephy0_led: ephy0_led-pins { + function = "ephy0_led"; + pins = "gpio6"; + }; + + pinctrl_ephy1_led: ephy1_led-pins { + function = "ephy1_led"; + pins = "gpio7"; + }; + + pinctrl_ephy2_led: ephy2_led-pins { + function = "ephy2_led"; + pins = "gpio8"; + }; + + pinctrl_ephy3_led: ephy3_led-pins { + function = "ephy3_led"; + pins = "gpio9"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio10"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio11"; + }; + + pinctrl_robosw_led0: robosw_led0-pins { + function = "robosw_led0"; + pins = "gpio12"; + }; + + pinctrl_robosw_led1: robosw_led1-pins { + function = "robosw_led1"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio14"; + }; + + pinctrl_pci: pci-pins { + pinctrl_pci_req1: pci_req1-pins { + function = "pci_req1"; + pins = "gpio16"; + }; + + pinctrl_pci_gnt1: pci_gnt1-pins { + function = "pci_gnt1"; + pins = "gpio17"; + }; + + pinctrl_pci_intb: pci_intb-pins { + function = "pci_intb"; + pins = "gpio18"; + }; + + pinctrl_pci_req0: pci_req0-pins { + function = "pci_req0"; + pins = "gpio19"; + }; + + pinctrl_pci_gnt0: pci_gnt0-pins { + function = "pci_gnt0"; + pins = "gpio20"; + }; + }; + + pinctrl_pcmcia: pcmcia-pins { + pinctrl_pcmcia_cd1: pcmcia_cd1-pins { + function = "pcmcia_cd1"; + pins = "gpio22"; + }; + + pinctrl_pcmcia_cd2: pcmcia_cd2-pins { + function = "pcmcia_cd2"; + pins = "gpio23"; + }; + + pinctrl_pcmcia_vs1: pcmcia_vs1-pins { + function = "pcmcia_vs1"; + pins = "gpio24"; + }; + + pinctrl_pcmcia_vs2: pcmcia_vs2-pins { + function = "pcmcia_vs2"; + pins = "gpio25"; + }; + }; + + pinctrl_ebi_cs2: ebi_cs2-pins { + function = "ebi_cs2"; + pins = "gpio26"; + }; + + pinctrl_ebi_cs3: ebi_cs3-pins { + function = "ebi_cs3"; + pins = "gpio27"; + }; + + pinctrl_spi_cs2: spi_cs2-pins { + function = "spi_cs2"; + pins = "gpio28"; + }; + + pinctrl_spi_cs3: spi_cs3-pins { + function = "spi_cs3"; + pins = "gpio29"; + }; + + pinctrl_spi_cs4: spi_cs4-pins { + function = "spi_cs4"; + pins = "gpio30"; + }; + + pinctrl_spi_cs5: spi_cs5-pins { + function = "spi_cs5"; + pins = "gpio31"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + pins = "uart1_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml new file mode 100644 index 000000000000..b85819fbb07c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom CRU + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: | + Broadcom CRU ("Clock and Reset Unit" or "Central Resource Unit") is a hardware + block grouping smaller blocks. On Broadcom Northstar platform it contains e.g. + clocks, pinctrl, USB PHY and thermal. + +properties: + compatible: + items: + - enum: + - brcm,ns-cru + - const: simple-mfd + + reg: + description: CRU registers + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + '^clock-controller@[a-f0-9]+$': + $ref: ../clock/brcm,iproc-clocks.yaml + + '^phy@[a-f0-9]+$': + $ref: ../phy/bcm-ns-usb2-phy.yaml + + '^pinctrl@[a-f0-9]+$': + $ref: ../pinctrl/brcm,ns-pinmux.yaml + + '^syscon@[a-f0-9]+$': + $ref: syscon.yaml + + '^thermal@[a-f0-9]+$': + $ref: ../thermal/brcm,ns-thermal.yaml + +additionalProperties: false + +required: + - reg + +examples: + - | + #include <dt-bindings/clock/bcm-nsp.h> + cru-bus@1800c100 { + compatible = "brcm,ns-cru", "simple-mfd"; + reg = <0x1800c100 0x1d0>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + clock-controller@100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; + reg = <0x100 0x14>; + clocks = <&osc>; + clock-output-names = "lcpll0", "pcie_phy", "sdio", "ddr_phy"; + }; + + clock-controller@140 { + #clock-cells = <1>; + compatible = "brcm,nsp-genpll"; + reg = <0x140 0x24>; + clocks = <&osc>; + clock-output-names = "genpll", "phy", "ethernetclk", "usbclk", + "iprocfast", "sata1", "sata2"; + }; + + phy@164 { + compatible = "brcm,ns-usb2-phy"; + reg = <0x164 0x4>; + brcm,syscon-clkset = <&clkset>; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + #phy-cells = <0>; + }; + + clkset: syscon@180 { + compatible = "brcm,cru-clkset", "syscon"; + reg = <0x180 0x4>; + }; + + pinctrl@1c0 { + compatible = "brcm,bcm4708-pinmux"; + reg = <0x1c0 0x24>; + reg-names = "cru_gpio_control"; + }; + + thermal@2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml new file mode 100644 index 000000000000..cff7d772a7db --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,misc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom's MISC block + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: | + Broadcom's MISC is a hardware block used on some SoCs (e.g. bcm63xx and + bcm4908). It's used to implement some simple functions like a watchdog, PCIe + reset, UniMAC control and more. + +properties: + compatible: + items: + - const: brcm,misc + - const: simple-mfd + + reg: + description: MISC block registers + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + '^reset-controller@[a-f0-9]+$': + $ref: ../reset/brcm,bcm4908-misc-pcie-reset.yaml + +additionalProperties: false + +required: + - reg + - '#address-cells' + - '#size-cells' + +examples: + - | + misc@ff802600 { + compatible = "brcm,misc", "simple-mfd"; + reg = <0xff802600 0xe4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xe4>; + + reset-controller@44 { + compatible = "brcm,bcm4908-misc-pcie-reset"; + reg = <0x44 0x4>; + #reset-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,twd.yaml b/Documentation/devicetree/bindings/mfd/brcm,twd.yaml new file mode 100644 index 000000000000..e5136a37b0a3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,twd.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,twd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom's Timer-Watchdog (aka TWD) + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: | + Broadcom has a Timer-Watchdog block used in multiple SoCs (e.g., BCM4908, + BCM63xx, BCM7038). There are few variants available (they differ slightly in + registers layout). This block consists of: timers, watchdog and optionally a + software reset handler. + +properties: + compatible: + items: + - enum: + - brcm,bcm4908-twd + - brcm,bcm7038-twd + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +patternProperties: + '^timer@[a-f0-9]+$': + $ref: /schemas/timer/brcm,bcmbca-timer.yaml + + '^watchdog@[a-f0-9]+$': + $ref: /schemas/watchdog/brcm,bcm7038-wdt.yaml + +additionalProperties: false + +required: + - reg + +examples: + - | + timer-mfd@ff800400 { + compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; + reg = <0xff800400 0x4c>; + ranges = <0x00000000 0xff800400 0x4c>; + + #address-cells = <1>; + #size-cells = <1>; + + timer@0 { + compatible = "brcm,bcm63138-timer"; + reg = <0x0 0x28>; + }; + + watchdog@28 { + compatible = "brcm,bcm7038-wdt"; + reg = <0x28 0x8>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml new file mode 100644 index 000000000000..3b3beab9db3f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/canaan,k210-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Canaan Kendryte K210 System Controller + +maintainers: + - Damien Le Moal <dlemoal@kernel.org> + +description: + Canaan Inc. Kendryte K210 SoC system controller which provides a + register map for controlling the clocks, reset signals and pin power + domains of the SoC. + +properties: + compatible: + items: + - const: canaan,k210-sysctl + - const: syscon + - const: simple-mfd + + clocks: + maxItems: 1 + description: + System controller Advanced Power Bus (APB) interface clock source. + + clock-names: + items: + - const: pclk + + reg: + maxItems: 1 + + clock-controller: + # Child node + type: object + $ref: ../clock/canaan,k210-clk.yaml + description: + Clock controller for the SoC clocks. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml. + + reset-controller: + # Child node + type: object + $ref: ../reset/canaan,k210-rst.yaml + description: + Reset controller for the SoC. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml. + + syscon-reboot: + # Child node + type: object + $ref: ../power/reset/syscon-reboot.yaml + description: + Reboot method for the SoC. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml. + +required: + - compatible + - clocks + - reg + - clock-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/k210-clk.h> + #include <dt-bindings/reset/k210-rst.h> + + clocks { + in0: oscllator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + }; + + sysctl: syscon@50440000 { + compatible = "canaan,k210-sysctl", + "syscon", "simple-mfd"; + reg = <0x50440000 0x100>; + clocks = <&sysclk K210_CLK_APB1>; + clock-names = "pclk"; + + sysclk: clock-controller { + #clock-cells = <1>; + compatible = "canaan,k210-clk"; + clocks = <&in0>; + }; + + sysrst: reset-controller { + compatible = "canaan,k210-rst"; + #reset-cells = <1>; + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&sysctl>; + offset = <48>; + mask = <1>; + value = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt deleted file mode 100644 index 3bf92ad37fa1..000000000000 --- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt +++ /dev/null @@ -1,85 +0,0 @@ -Cirrus Logic Lochnagar Audio Development Board - -Lochnagar is an evaluation and development board for Cirrus Logic -Smart CODEC and Amp devices. It allows the connection of most Cirrus -Logic devices on mini-cards, as well as allowing connection of -various application processor systems to provide a full evaluation -platform. Audio system topology, clocking and power can all be -controlled through the Lochnagar, allowing the device under test -to be used in a variety of possible use cases. - -Also see these documents for generic binding information: - [1] GPIO : ../gpio/gpio.txt - -And these for relevant defines: - [2] include/dt-bindings/pinctrl/lochnagar.h - [3] include/dt-bindings/clock/lochnagar.h - -And these documents for the required sub-node binding details: - [4] Clock: ../clock/cirrus,lochnagar.txt - [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt - [6] Regulator: ../regulator/cirrus,lochnagar.txt - [7] Sound: ../sound/cirrus,lochnagar.txt - [8] Hardware Monitor: ../hwmon/cirrus,lochnagar.txt - -Required properties: - - - compatible : One of the following strings: - "cirrus,lochnagar1" - "cirrus,lochnagar2" - - - reg : I2C slave address - - - reset-gpios : Reset line to the Lochnagar, see [1]. - -Required sub-nodes: - - - lochnagar-clk : Binding for the clocking components, see [4]. - - - lochnagar-pinctrl : Binding for the pin control components, see [5]. - -Optional sub-nodes: - - - Bindings for the regulator components, see [6]. Only available on - Lochnagar 2. - - - lochnagar-sc : Binding for the sound card components, see [7]. - Only available on Lochnagar 2. - - lochnagar-hwmon : Binding for the hardware monitor components, see [8]. - Only available on Lochnagar 2. - -Optional properties: - - - present-gpios : Host present line, indicating the presence of a - host system, see [1]. This can be omitted if the present line is - tied in hardware. - -Example: - -lochnagar: lochnagar@22 { - compatible = "cirrus,lochnagar2"; - reg = <0x22>; - - reset-gpios = <&gpio0 55 0>; - present-gpios = <&gpio0 60 0>; - - lochnagar-clk { - compatible = "cirrus,lochnagar2-clk"; - ... - }; - - lochnagar-pinctrl { - compatible = "cirrus,lochnagar-pinctrl"; - ... - }; - - lochnagar-sc { - compatible = "cirrus,lochnagar2-soundcard"; - ... - }; - - lochnagar-hwmon { - compatible = "cirrus,lochnagar2-hwmon"; - ... - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml new file mode 100644 index 000000000000..ebbedabb2bd4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml @@ -0,0 +1,365 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Lochnagar Audio Development Board + +maintainers: + - patches@opensource.cirrus.com + +description: | + Lochnagar is an evaluation and development board for Cirrus Logic + Smart CODEC and Amp devices. It allows the connection of most Cirrus + Logic devices on mini-cards, as well as allowing connection of + various application processor systems to provide a full evaluation + platform. Audio system topology, clocking and power can all be + controlled through the Lochnagar, allowing the device under test + to be used in a variety of possible use cases. + + Also see these documents for generic binding information: + [1] GPIO : ../gpio/gpio.txt + + And these for relevant defines: + [2] include/dt-bindings/pinctrl/lochnagar.h + [3] include/dt-bindings/clock/lochnagar.h + + And these documents for the required sub-node binding details: + [4] Clock: ../clock/cirrus,lochnagar.yaml + [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml + [6] Sound: ../sound/cirrus,lochnagar.yaml + [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml + +allOf: + - if: + properties: + compatible: + enum: + - cirrus,lochnagar2 + then: + properties: + lochnagar-hwmon: + type: object + $ref: /schemas/hwmon/cirrus,lochnagar.yaml# + + lochnagar-sc: + type: object + $ref: /schemas/sound/cirrus,lochnagar.yaml# + +properties: + compatible: + enum: + - cirrus,lochnagar1 + - cirrus,lochnagar2 + + reg: + const: 0x22 + + reset-gpios: + maxItems: 1 + + present-gpios: + description: | + Host present line, indicating the presence of a + host system, see [1]. This can be omitted if the present line is + tied in hardware. + maxItems: 1 + + lochnagar-clk: + type: object + $ref: /schemas/clock/cirrus,lochnagar.yaml# + + lochnagar-pmic32k: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 32768 + + lochnagar-clk12m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 12288000 + + lochnagar-clk11m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 11298600 + + lochnagar-clk24m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 24576000 + + lochnagar-clk22m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 22579200 + + lochnagar-clk8m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 8192000 + + lochnagar-usb24m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 24576000 + + lochnagar-usb12m: + type: object + $ref: /schemas/clock/fixed-clock.yaml# + properties: + clock-frequency: + const: 12288000 + + pinctrl: + type: object + $ref: /schemas/pinctrl/cirrus,lochnagar.yaml# + + lochnagar-hwmon: + type: object + $ref: /schemas/hwmon/cirrus,lochnagar.yaml# + + lochnagar-sc: + type: object + $ref: /schemas/sound/cirrus,lochnagar.yaml# + + VDDCORE: + description: + Initialisation data for the VDDCORE regulator, which supplies the + CODECs digital core if not being provided by an internal regulator. + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + properties: + compatible: + enum: + - cirrus,lochnagar2-vddcore + + SYSVDD-supply: + description: + Primary power supply for the Lochnagar. + required: + - compatible + + MICVDD: + description: + Initialisation data for the MICVDD regulator, which supplies the + CODECs MICVDD. + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + properties: + compatible: + enum: + - cirrus,lochnagar2-micvdd + + SYSVDD-supply: + description: + Primary power supply for the Lochnagar. + required: + - compatible + + MIC1VDD: + description: + Initialisation data for the MIC1VDD supplies. + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + properties: + compatible: + enum: + - cirrus,lochnagar2-mic1vdd + + cirrus,micbias-input: + description: + A property selecting which of the CODEC minicard micbias outputs + should be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + + MICBIAS1-supply: + description: + Regulator supplies for the MIC1VDD outputs, supplying the digital + microphones, normally supplied from the attached CODEC. + required: + - compatible + + MIC2VDD: + description: + Initialisation data for the MIC2VDD supplies. + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + properties: + compatible: + enum: + - cirrus,lochnagar2-mic2vdd + + cirrus,micbias-input: + description: + A property selecting which of the CODEC minicard micbias outputs + should be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + + MICBIAS2-supply: + description: + Regulator supplies for the MIC2VDD outputs, supplying the digital + microphones, normally supplied from the attached CODEC. + required: + - compatible + + VDD1V8: + description: + Recommended fixed regulator for the VDD1V8 regulator, which supplies + the CODECs analog and 1.8V digital supplies. + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + properties: + compatible: + enum: + - regulator-fixed + + regulator-min-microvolt: + const: 1800000 + + regulator-max-microvolt: + const: 1800000 + + vin-supply: + description: + Should be set to same supply as SYSVDD + required: + - compatible + - regulator-min-microvolt + - regulator-max-microvolt + - regulator-boot-on + - regulator-always-on + - vin-supply + +required: + - compatible + - reg + - reset-gpios + - lochnagar-clk + - pinctrl + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lochnagar.h> + #include <dt-bindings/pinctrl/lochnagar.h> + i2c@e0004000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0004000 0x1000>; + + lochnagar: lochnagar@22 { + compatible = "cirrus,lochnagar2"; + reg = <0x22>; + + reset-gpios = <&gpio0 55 0>; + present-gpios = <&gpio0 60 0>; + + lochnagarclk: lochnagar-clk { + compatible = "cirrus,lochnagar2-clk"; + + #clock-cells = <1>; + clocks = <&clkaudio>, <&clkpmic>; + clock-names = "ln-gf-mclk2", "ln-pmic-32k"; + + assigned-clocks = <&lochnagarclk LOCHNAGAR_CDC_MCLK1>, + <&lochnagarclk LOCHNAGAR_CDC_MCLK2>; + assigned-clock-parents = <&clkaudio>, <&clkpmic>; + }; + + clkpmic: lochnagar-pmic32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + pinctrl { + compatible = "cirrus,lochnagar-pinctrl"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinsettings>; + + pinsettings: pin-settings { + ap2aif-pins { + input-enable; + groups = "gf-aif1"; + function = "codec-aif3"; + }; + codec2aif-pins { + output-enable; + groups = "codec-aif3"; + function = "gf-aif1"; + }; + }; + }; + + lochnagar-sc { + compatible = "cirrus,lochnagar2-soundcard"; + + #sound-dai-cells = <1>; + + clocks = <&lochnagarclk LOCHNAGAR_SOUNDCARD_MCLK>; + clock-names = "mclk"; + }; + + lochnagar-hwmon { + compatible = "cirrus,lochnagar2-hwmon"; + }; + + MIC1VDD { + compatible = "cirrus,lochnagar2-mic1vdd"; + + cirrus,micbias-input = <3>; + }; + + MICVDD { + compatible = "cirrus,lochnagar2-micvdd"; + + SYSVDD-supply = <&wallvdd>; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + VDD1V8 { + compatible = "regulator-fixed"; + + regulator-name = "VDD1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + + vin-supply = <&wallvdd>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml new file mode 100644 index 000000000000..68c75a517c92 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml @@ -0,0 +1,297 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/cirrus,madera.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Madera class audio CODECs Multi-Functional Device + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a range + of analogue I/O. + + See also the child driver bindings in: + + bindings/pinctrl/cirrus,madera.yaml + bindings/regulator/wlf,arizona.yaml + bindings/sound/cirrus,madera.yaml + +allOf: + - $ref: /schemas/pinctrl/cirrus,madera.yaml# + - $ref: /schemas/regulator/wlf,arizona.yaml# + - $ref: /schemas/sound/cirrus,madera.yaml# + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l85 + - wlf,wm1840 + then: + properties: + SPKVDDL-supply: + description: + Left speaker driver power supply. + + SPKVDDR-supply: + description: + Right speaker driver power supply. + + required: + - SPKVDDL-supply + - SPKVDDR-supply + else: + required: + - DCVDD-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l15 + - cirrus,cs47l35 + then: + properties: + SPKVDD-supply: + description: + Mono speaker driver power supply. + + required: + - SPKVDD-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l35 + - cirrus,cs47l85 + - cirrus,cs47l90 + - cirrus,cs47l91 + - wlf,wm1840 + then: + properties: + DBVDD2-supply: + description: + Databus power supply. + + required: + - DBVDD2-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l85 + - cirrus,cs47l90 + - cirrus,cs47l91 + - wlf,wm1840 + then: + properties: + DBVDD3-supply: + description: + Databus power supply. + + DBVDD4-supply: + description: + Databus power supply. + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l15 + then: + required: + - MICVDD-supply + else: + properties: + CPVDD2-supply: + description: + Secondary charge pump power supply. + + required: + - CPVDD2-supply + +properties: + compatible: + enum: + - cirrus,cs47l15 + - cirrus,cs47l35 + - cirrus,cs47l85 + - cirrus,cs47l90 + - cirrus,cs47l91 + - cirrus,cs42l92 + - cirrus,cs47l92 + - cirrus,cs47l93 + - cirrus,wm1840 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number. The second cell is reserved for + future use and must be zero + const: 2 + + interrupt-controller: true + + '#interrupt-cells': + description: + The first cell is the IRQ number. + The second cell is the flags, encoded as the trigger masks from + bindings/interrupt-controller/interrupts.txt + const: 2 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + One entry specifying the GPIO controlling /RESET. As defined in + bindings/gpio.txt. Although optional, it is strongly recommended + to use a hardware reset. + maxItems: 1 + + clocks: + description: + Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3. + minItems: 1 + maxItems: 3 + + clock-names: + description: | + May contain up to three strings: + "mclk1" For the clock supplied on MCLK1, recommended to be a + high quality audio reference clock. + "mclk2" For the clock supplied on MCLK2, required to be an + always on 32k clock. + "mclk3" For the clock supplied on MCLK3. + oneOf: + - items: + - const: mclk1 + - items: + - const: mclk2 + - items: + - const: mclk3 + - items: + - const: mclk1 + - const: mclk2 + - items: + - const: mclk1 + - const: mclk3 + - items: + - const: mclk2 + - const: mclk3 + - items: + - const: mclk1 + - const: mclk2 + - const: mclk3 + + AVDD-supply: + description: + Analogue power supply. + + DBVDD1-supply: + description: + Databus power supply. + + CPVDD1-supply: + description: + Charge pump power supply. + + DCVDD-supply: + description: + Digital power supply, optional on CS47L85, WM1840 where it can + be supplied internally. + + MICVDD-supply: + description: + Microphone power supply, normally supplied internally except on + cs47l24, wm1831 where it is mandatory. + +required: + - compatible + - gpio-controller + - '#gpio-cells' + - interrupt-controller + - '#interrupt-cells' + - interrupts + - AVDD-supply + - DBVDD1-supply + - CPVDD1-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/madera.h> + i2c@e0004000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0004000 0x1000>; + + cs47l85: codec@1a { + compatible = "cirrus,cs47l85"; + reg = <0x1a>; + + reset-gpios = <&gpio 0>; + wlf,ldoena = <&gpio 1>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <4 1 0>; + + gpio-controller; + #gpio-cells = <2>; + + AVDD-supply = <&vdd1v8>; + DBVDD1-supply = <&vdd1v8>; + DBVDD2-supply = <&vdd1v8>; + DBVDD3-supply = <&vdd1v8>; + DBVDD4-supply = <&vdd1v8>; + CPVDD1-supply = <&vdd1v8>; + CPVDD2-supply = <&vdd1v2>; + SPKVDDL-supply = <&vdd5v>; + SPKVDDR-supply = <&vdd5v>; + + clocks = <&clks 0>, <&clks 1>, <&clks 2>; + clock-names = "mclk1", "mclk2", "mclk3"; + + cirrus,dmic-ref = <0 0 MADERA_DMIC_REF_MICBIAS1>; + cirrus,inmode = < + MADERA_INMODE_SE MADERA_INMODE_SE + MADERA_INMODE_SE MADERA_INMODE_SE + MADERA_INMODE_DIFF MADERA_INMODE_DIFF + >; + cirrus,max-channels-clocked = <2 0 0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinsettings>; + + pinsettings: pin-settings { + aif1-pins { + groups = "aif1"; + function = "aif1"; + bias-bus-hold; + }; + + aif2-pins { + groups = "aif2"; + function = "aif2"; + bias-bus-hold; + }; + + aif3-pins { + groups = "aif3"; + function = "aif3"; + bias-bus-hold; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt deleted file mode 100644 index 4860eabd0f72..000000000000 --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ /dev/null @@ -1,76 +0,0 @@ -ChromeOS Embedded Controller - -Google's ChromeOS EC is a Cortex-M device which talks to the AP and -implements various function such as keyboard and battery charging. - -The EC can be connect through various means (I2C, SPI, LPC, RPMSG) and the -compatible string used depends on the interface. Each connection method has -its own driver which connects to the top level interface-agnostic EC driver. -Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to -the top-level driver. - -Required properties (I2C): -- compatible: "google,cros-ec-i2c" -- reg: I2C slave address - -Required properties (SPI): -- compatible: "google,cros-ec-spi" -- reg: SPI chip select - -Required properties (RPMSG): -- compatible: "google,cros-ec-rpmsg" - -Optional properties (SPI): -- google,cros-ec-spi-pre-delay: Some implementations of the EC need a little - time to wake up from sleep before they can receive SPI transfers at a high - clock rate. This property specifies the delay, in usecs, between the - assertion of the CS to the start of the first clock pulse. -- google,cros-ec-spi-msg-delay: Some implementations of the EC require some - additional processing time in order to accept new transactions. If the delay - between transactions is not long enough the EC may not be able to respond - properly to subsequent transactions and cause them to hang. This property - specifies the delay, in usecs, introduced between transactions to account - for the time required by the EC to get back into a state in which new data - can be accepted. - -Required properties (LPC): -- compatible: "google,cros-ec-lpc" -- reg: List of (IO address, size) pairs defining the interface uses - -Optional properties (all): -- google,has-vbc-nvram: Some implementations of the EC include a small - nvram space used to store verified boot context data. This boolean flag - is used to specify whether this nvram is present or not. - -Example for I2C: - -i2c@12ca0000 { - cros-ec@1e { - reg = <0x1e>; - compatible = "google,cros-ec-i2c"; - interrupts = <14 0>; - interrupt-parent = <&wakeup_eint>; - wakeup-source; - }; - - -Example for SPI: - -spi@131b0000 { - ec@0 { - compatible = "google,cros-ec-spi"; - reg = <0x0>; - interrupts = <14 0>; - interrupt-parent = <&wakeup_eint>; - wakeup-source; - spi-max-frequency = <5000000>; - controller-data { - cs-gpio = <&gpf0 3 4 3 0>; - samsung,spi-cs; - samsung,spi-feedback-delay = <2>; - }; - }; -}; - - -Example for LPC is not supplied as it is not yet implemented. diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt index 857af982c88f..e4eedd3bd233 100644 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ b/Documentation/devicetree/bindings/mfd/da9062.txt @@ -1,8 +1,8 @@ * Dialog DA9062 Power Management Integrated Circuit (PMIC) Product information for the DA9062 and DA9061 devices can be found here: -- http://www.dialog-semiconductor.com/products/da9062 -- http://www.dialog-semiconductor.com/products/da9061 +- https://www.dialog-semiconductor.com/products/da9062 +- https://www.dialog-semiconductor.com/products/da9061 The DA9062 PMIC consists of: @@ -33,11 +33,6 @@ Required properties: "dlg,da9061" for DA9061 - reg : Specifies the I2C slave address (this defaults to 0x58 but it can be modified to match the chip's OTP settings). -- interrupts : IRQ line information. -- interrupt-controller - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -further information on IRQ bindings. Optional properties: @@ -48,6 +43,12 @@ Optional properties: See Documentation/devicetree/bindings/gpio/gpio.txt for further information on GPIO bindings. +- interrupts : IRQ line information. +- interrupt-controller + +See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for +further information on IRQ bindings. + Sub-nodes: - regulators : This node defines the settings for the LDOs and BUCKs. @@ -85,7 +86,7 @@ Sub-nodes: - onkey : See ../input/da9062-onkey.txt -- watchdog: See ../watchdog/da9062-watchdog.txt +- watchdog: See ../watchdog/da9062-wdt.txt - thermal : See ../thermal/da9062-thermal.txt diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt deleted file mode 100644 index 8da879935c59..000000000000 --- a/Documentation/devicetree/bindings/mfd/da9063.txt +++ /dev/null @@ -1,111 +0,0 @@ -* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) - -DA9093 consists of a large and varied group of sub-devices (I2C Only): - -Device Supply Names Description ------- ------------ ----------- -da9063-regulator : : LDOs & BUCKs -da9063-onkey : : On Key -da9063-rtc : : Real-Time Clock (DA9063 only) -da9063-watchdog : : Watchdog - -====== - -Required properties: - -- compatible : Should be "dlg,da9063" or "dlg,da9063l" -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be - modified to match the chip's OTP settings). -- interrupts : IRQ line information. -- interrupt-controller - -Sub-nodes: - -- regulators : This node defines the settings for the LDOs and BUCKs. - The DA9063(L) regulators are bound using their names listed below: - - bcore1 : BUCK CORE1 - bcore2 : BUCK CORE2 - bpro : BUCK PRO - bmem : BUCK MEM - bio : BUCK IO - bperi : BUCK PERI - ldo1 : LDO_1 (DA9063 only) - ldo2 : LDO_2 (DA9063 only) - ldo3 : LDO_3 - ldo4 : LDO_4 (DA9063 only) - ldo5 : LDO_5 (DA9063 only) - ldo6 : LDO_6 (DA9063 only) - ldo7 : LDO_7 - ldo8 : LDO_8 - ldo9 : LDO_9 - ldo10 : LDO_10 (DA9063 only) - ldo11 : LDO_11 - - The component follows the standard regulator framework and the bindings - details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - -- rtc : This node defines settings for the Real-Time Clock associated with - the DA9063 only. The RTC is not present in DA9063L. There are currently - no entries in this binding, however compatible = "dlg,da9063-rtc" should - be added if a node is created. - -- onkey : This node defines the OnKey settings for controlling the key - functionality of the device. The node should contain the compatible property - with the value "dlg,da9063-onkey". - - Optional onkey properties: - - - dlg,disable-key-power : Disable power-down using a long key-press. If this - entry exists the OnKey driver will remove support for the KEY_POWER key - press. If this entry does not exist then by default the key-press - triggered power down is enabled and the OnKey will support both KEY_POWER - and KEY_SLEEP. - -- watchdog : This node defines settings for the Watchdog timer associated - with the DA9063 and DA9063L. There are currently no entries in this - binding, however compatible = "dlg,da9063-watchdog" should be added - if a node is created. - - -Example: - - pmic0: da9063@58 { - compatible = "dlg,da9063" - reg = <0x58>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9063-rtc"; - }; - - wdt { - compatible = "dlg,da9063-watchdog"; - }; - - onkey { - compatible = "dlg,da9063-onkey"; - dlg,disable-key-power; - }; - - regulators { - DA9063_BCORE1: bcore1 { - regulator-name = "BCORE1"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <2000000>; - regulator-boot-on; - }; - DA9063_LDO11: ldo11 { - regulator-name = "LDO_11"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml new file mode 100644 index 000000000000..f6967c1f6235 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/delta,tn48m-cpld.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Delta Networks TN48M CPLD controller + +maintainers: + - Robert Marko <robert.marko@sartura.hr> + +description: | + Lattice CPLD onboard the TN48M switches is used for system + management. + + It provides information about the hardware model, revision, + PSU status etc. + + It is also being used as a GPIO expander and reset controller + for the switch MAC-s and other peripherals. + +properties: + compatible: + const: delta,tn48m-cpld + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +patternProperties: + "^gpio(@[0-9a-f]+)?$": + $ref: ../gpio/delta,tn48m-gpio.yaml + + "^reset-controller?$": + $ref: ../reset/delta,tn48m-reset.yaml + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cpld@41 { + compatible = "delta,tn48m-cpld"; + reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@31 { + compatible = "delta,tn48m-gpo"; + reg = <0x31>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@3a { + compatible = "delta,tn48m-gpi"; + reg = <0x3a>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@40 { + compatible = "delta,tn48m-gpi"; + reg = <0x40>; + gpio-controller; + #gpio-cells = <2>; + }; + + reset-controller { + compatible = "delta,tn48m-reset"; + #reset-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml new file mode 100644 index 000000000000..c5a7e10d7d80 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) + +maintainers: + - Steve Twiss <stwiss.opensource@diasemi.com> + +description: | + For device-tree bindings of other sub-modules refer to the binding documents + under the respective sub-system directories. + Using regulator-{uv,ov}-{warn,error,protection}-microvolt requires special + handling: First, when GP_FB2 is used, it must be ensured that there is no + moment where all voltage monitors are disabled. Next, as da9063 only supports + UV *and* OV monitoring, both must be set to the same severity and value + (0: disable, 1: enable). + +properties: + compatible: + enum: + - dlg,da9063 + - dlg,da9063l + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + dlg,use-sw-pm: + type: boolean + description: + Disable the watchdog during suspend. + Only use this option if you can't use the watchdog automatic suspend + function during a suspend (see register CONTROL_B). + + watchdog: + type: object + $ref: /schemas/watchdog/watchdog.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-watchdog + + rtc: + type: object + $ref: /schemas/rtc/rtc.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-rtc + + onkey: + type: object + $ref: /schemas/input/input.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-onkey + + dlg,disable-key-power: + type: boolean + description: | + Disable power-down using a long key-press. + If this entry does not exist then by default the key-press triggered + power down is enabled and the OnKey will support both KEY_POWER and + KEY_SLEEP. + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + #interrupt-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + watchdog { + compatible = "dlg,da9063-watchdog"; + }; + + onkey { + compatible = "dlg,da9063-onkey"; + dlg,disable-key-power; + }; + + regulators { + bcore1 { + regulator-name = "BCORE1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <2000000>; + regulator-boot-on; + }; + ldo6 { + /* UNUSED */ + regulator-name = "LDO_6"; + regulator-uv-protection-microvolt = <0>; + regulator-ov-protection-microvolt = <0>; + }; + ldo11 { + regulator-name = "LDO_11"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-uv-protection-microvolt = <1>; + regulator-ov-protection-microvolt = <1>; + regulator-always-on; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml new file mode 100644 index 000000000000..9b11b6e2bbf7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ENE KB3930 Embedded Controller + +description: | + This binding describes the ENE KB3930 Embedded Controller attached to an + I2C bus. + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + compatible: + items: + - enum: + - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020) + - const: ene,kb3930 + reg: + maxItems: 1 + + off-gpios: + description: GPIO used with the shutdown protocol on Ariel + maxItems: 2 + + system-power-controller: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@58 { + compatible = "dell,wyse-ariel-ec", "ene,kb3930"; + reg = <0x58>; + system-power-controller; + + off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>, + <&gpio 127 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/ene-kb930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml new file mode 100644 index 000000000000..02c111def5de --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ene-kb930.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ENE KB930 Embedded Controller + +description: | + This binding describes the ENE KB930 Embedded Controller attached to an + I2C bus. + +maintainers: + - Dmitry Osipenko <digetx@gmail.com> + +$ref: /schemas/power/supply/power-supply.yaml + +properties: + compatible: + items: + - enum: + - acer,a500-iconia-ec # Acer A500 Iconia tablet device + - const: ene,kb930 + reg: + maxItems: 1 + + system-power-controller: true + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + battery: battery-cell { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3260000>; + energy-full-design-microwatt-hours = <24000000>; + operating-range-celsius = <0 40>; + }; + + mains: ac-adapter { + compatible = "gpio-charger"; + charger-type = "mains"; + gpios = <&gpio 125 0>; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + embedded-controller@58 { + compatible = "acer,a500-iconia-ec", "ene,kb930"; + reg = <0x58>; + + system-power-controller; + + monitored-battery = <&battery>; + power-supplies = <&mains>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml new file mode 100644 index 000000000000..20067002cc4a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml @@ -0,0 +1,192 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp Control and Status Registers Module + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + As a system controller, the Freescale i.MX8qm/qxp Control and Status + Registers(CSR) module represents a set of miscellaneous registers of a + specific subsystem. It may provide control and/or status report interfaces + to a mix of standalone hardware devices within that subsystem. One typical + use-case is for some other nodes to acquire a reference to the syscon node + by phandle, and the other typical use-case is that the operating system + should consider all subnodes of the CSR module as separate child devices. + +properties: + $nodename: + pattern: "^syscon@[0-9a-f]+$" + + compatible: + items: + - enum: + - fsl,imx8qxp-mipi-lvds-csr + - fsl,imx8qm-lvds-csr + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ipg + +patternProperties: + "^(ldb|phy|pxl2dpi)$": + type: object + description: The possible child devices of the CSR module. + +required: + - compatible + - reg + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8qxp-mipi-lvds-csr + then: + required: + - pxl2dpi + - ldb + + - if: + properties: + compatible: + contains: + const: fsl,imx8qm-lvds-csr + then: + required: + - phy + - ldb + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + mipi_lvds_0_csr: syscon@56221000 { + compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd"; + reg = <0x56221000 0x1000>; + clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>; + clock-names = "ipg"; + + mipi_lvds_0_pxl2dpi: pxl2dpi { + compatible = "fsl,imx8qxp-pxl2dpi"; + fsl,sc-resource = <IMX_SC_R_MIPI_0>; + power-domains = <&pd IMX_SC_R_MIPI_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 { + reg = <0>; + remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 { + reg = <1>; + remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; + }; + }; + }; + }; + + mipi_lvds_0_ldb: ldb { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8qxp-ldb"; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; + clock-names = "pixel", "bypass"; + power-domains = <&pd IMX_SC_R_LVDS_0>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; + }; + }; + + port@1 { + reg = <1>; + + /* ... */ + }; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; + }; + }; + + port@1 { + reg = <1>; + + /* ... */ + }; + }; + }; + }; + + mipi_lvds_0_phy: phy@56228300 { + compatible = "fsl,imx8qxp-mipi-dphy"; + reg = <0x56228300 0x100>; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>; + clock-names = "phy_ref"; + #phy-cells = <0>; + fsl,syscon = <&mipi_lvds_0_csr>; + power-domains = <&pd IMX_SC_R_MIPI_0>; + }; diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml new file mode 100644 index 000000000000..dc379f3ebf24 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Gateworks System Controller + +description: | + The Gateworks System Controller (GSC) is a device present across various + Gateworks product families that provides a set of system related features + such as the following (refer to the board hardware user manuals to see what + features are present) + - Watchdog Timer + - GPIO + - Pushbutton controller + - Hardware monitor with ADC's for temperature and voltage rails and + fan controller + +maintainers: + - Tim Harvey <tharvey@gateworks.com> + +properties: + $nodename: + pattern: "gsc@[0-9a-f]{1,2}" + compatible: + const: gw,gsc + + reg: + description: I2C device address + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + adc: + type: object + additionalProperties: false + description: Optional hardware monitoring module + + properties: + compatible: + const: gw,gsc-adc + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^channel@[0-9a-f]+$": + type: object + additionalProperties: false + description: | + Properties for a single ADC which can report cooked values + (i.e. temperature sensor based on thermister), raw values + (i.e. voltage rail with a pre-scaling resistor divider). + + properties: + reg: + description: Register of the ADC + maxItems: 1 + + label: + description: Name of the ADC input + + gw,mode: + description: | + conversion mode: + 0 - temperature, in C*10 + 1 - pre-scaled 24-bit voltage value + 2 - scaled voltage based on an optional resistor divider + and optional offset + 3 - pre-scaled 16-bit voltage value + 4 - fan tach input to report RPM's + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4] + + gw,voltage-divider-ohms: + description: Values of resistors for divider on raw ADC input + maxItems: 2 + items: + minimum: 1000 + maximum: 1000000 + + gw,voltage-offset-microvolt: + description: | + A positive voltage offset to apply to a raw ADC + (i.e. to compensate for a diode drop). + minimum: 0 + maximum: 1000000 + + required: + - gw,mode + - reg + - label + + required: + - compatible + - "#address-cells" + - "#size-cells" + +patternProperties: + "^fan-controller@[0-9a-f]+$": + type: object + additionalProperties: false + description: Optional fan controller + + properties: + compatible: + const: gw,gsc-fan + + reg: + description: The fan controller base address + maxItems: 1 + + required: + - compatible + - reg + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* A0: Board Temperature */ + reg = <0x00>; + label = "temp"; + gw,mode = <0>; + }; + + channel@2 { /* A1: Input Voltage (raw ADC) */ + reg = <0x02>; + label = "vdd_vin"; + gw,mode = <1>; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <800000>; + }; + + channel@b { /* A2: Battery voltage */ + reg = <0x0b>; + label = "vdd_bat"; + gw,mode = <1>; + }; + }; + + fan-controller@2c { + compatible = "gw,gsc-fan"; + reg = <0x2c>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml new file mode 100644 index 000000000000..e1ca4f297c6d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -0,0 +1,322 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/google,cros-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS Embedded Controller + +maintainers: + - Benson Leung <bleung@chromium.org> + - Guenter Roeck <groeck@chromium.org> + +description: + Google's ChromeOS EC is a microcontroller which talks to the AP and + implements various functions such as keyboard and battery charging. + The EC can be connected through various interfaces (I2C, SPI, and others) + and the compatible string specifies which interface is being used. + +properties: + compatible: + oneOf: + - description: + For implementations of the EC connected through I2C. + const: google,cros-ec-i2c + - description: + For implementations of the EC connected through SPI. + const: google,cros-ec-spi + - description: + For implementations of the FPMCU connected through SPI. + items: + - const: google,cros-ec-fp + - const: google,cros-ec-spi + - description: + For implementations of the EC connected through RPMSG. + const: google,cros-ec-rpmsg + - description: + For implementations of the EC connected through UART. + const: google,cros-ec-uart + + controller-data: true + + google,cros-ec-spi-pre-delay: + description: + This property specifies the delay in usecs between the + assertion of the CS and the first clock pulse. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + google,cros-ec-spi-msg-delay: + description: + This property specifies the delay in usecs between messages. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + google,has-vbc-nvram: + description: + Some implementations of the EC include a small nvram space used to + store verified boot context data. This boolean flag is used to specify + whether this nvram is present or not. + type: boolean + + mediatek,rpmsg-name: + description: + Must be defined if the cros-ec is a rpmsg device for a Mediatek + ARM Cortex M4 Co-processor. Contains the name of the rpmsg + device. Used to match the subnode to the rpmsg device announced by + the SCP. + $ref: /schemas/types.yaml#/definitions/string + + spi-max-frequency: true + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + boot0-gpios: + maxItems: 1 + description: Assert for bootloader mode. + + vdd-supply: true + + wakeup-source: + description: Button can wake-up the system. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + typec: + $ref: /schemas/chrome/google,cros-ec-typec.yaml# + + ec-pwm: + $ref: /schemas/pwm/google,cros-ec-pwm.yaml# + deprecated: true + + pwm: + $ref: /schemas/pwm/google,cros-ec-pwm.yaml# + + kbd-led-backlight: + $ref: /schemas/chrome/google,cros-kbd-led-backlight.yaml# + + keyboard-controller: + $ref: /schemas/input/google,cros-ec-keyb.yaml# + + proximity: + $ref: /schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml# + + codecs: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 2 + + '#size-cells': + const: 1 + + patternProperties: + "^ec-codec@[a-f0-9]+$": + type: object + $ref: /schemas/sound/google,cros-ec-codec.yaml# + + required: + - "#address-cells" + - "#size-cells" + + cbas: + type: object + + description: + This device is used to signal when a detachable base is attached + to a Chrome OS tablet. This device cannot be detected at runtime. + + properties: + compatible: + const: google,cros-cbas + + required: + - compatible + + additionalProperties: false + +patternProperties: + "^i2c-tunnel[0-9]*$": + type: object + $ref: /schemas/i2c/google,cros-ec-i2c-tunnel.yaml# + + "^regulator@[0-9]+$": + type: object + $ref: /schemas/regulator/google,cros-ec-regulator.yaml# + + "^extcon[0-9]*$": + type: object + $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml# + +required: + - compatible + +allOf: + - if: + properties: + compatible: + not: + contains: + const: google,cros-ec-spi + then: + properties: + controller-data: false + google,cros-ec-spi-pre-delay: false + google,cros-ec-spi-msg-delay: false + spi-max-frequency: false + else: + $ref: /schemas/spi/spi-peripheral-props.yaml + + - if: + properties: + compatible: + not: + contains: + const: google,cros-ec-rpmsg + then: + properties: + mediatek,rpmsg-name: false + + - if: + properties: + compatible: + not: + contains: + enum: + - google,cros-ec-rpmsg + - google,cros-ec-uart + then: + required: + - reg + - interrupts + + - if: + properties: + compatible: + contains: + const: google,cros-ec-fp + then: + properties: + '#address-cells': false + '#size-cells': false + typec: false + ec-pwm: false + kbd-led-backlight: false + keyboard-controller: false + proximity: false + codecs: false + cbas: false + + patternProperties: + "^i2c-tunnel[0-9]*$": false + "^regulator@[0-9]+$": false + "^extcon[0-9]*$": false + + # Using additionalProperties: false here and + # listing true properties doesn't work + + required: + - reset-gpios + - boot0-gpios + - vdd-supply + else: + properties: + reset-gpios: false + boot0-gpios: false + vdd-supply: false + +additionalProperties: false + +examples: + # Example for I2C + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@1e { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 0>; + interrupt-parent = <&gpio0>; + }; + }; + + # Example for SPI + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0x0>; + google,cros-ec-spi-msg-delay = <30>; + google,cros-ec-spi-pre-delay = <10>; + interrupts = <99 0>; + interrupt-parent = <&gpio7>; + spi-max-frequency = <5000000>; + + proximity { + compatible = "google,cros-ec-mkbp-proximity"; + }; + + cbas { + compatible = "google,cros-cbas"; + }; + }; + }; + + # Example for RPMSG + - | + scp0 { + cros-ec { + compatible = "google,cros-ec-rpmsg"; + }; + }; + + # Example for FPMCU + - | + spi { + #address-cells = <0x1>; + #size-cells = <0x0>; + + ec@0 { + compatible = "google,cros-ec-fp", "google,cros-ec-spi"; + reg = <0x0>; + interrupt-parent = <&gpio_controller>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <3000000>; + reset-gpios = <&gpio_controller 5 GPIO_ACTIVE_LOW>; + boot0-gpios = <&gpio_controller 10 GPIO_ACTIVE_HIGH>; + vdd-supply = <&pp3300_fp_mcu>; + }; + }; + + # Example for UART + - | + serial { + cros-ec { + compatible = "google,cros-ec-uart"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml new file mode 100644 index 000000000000..6a824351834e --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon 6421v600 SPMI PMIC + +maintainers: + - Mauro Carvalho Chehab <mchehab+huawei@kernel.org> + +description: | + HiSilicon 6421v600 should be connected inside a MIPI System Power Management + (SPMI) bus. It provides interrupts and power supply. + + The GPIO and interrupt settings are represented as part of the top-level PMIC + node. + + The SPMI controller part is provided by + Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml + +properties: + $nodename: + pattern: "pmic@[0-9a-f]" + + compatible: + const: hisilicon,hi6421v600-spmi + + reg: + maxItems: 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + + interrupts: + maxItems: 1 + + regulators: + type: object + + additionalProperties: false + + patternProperties: + '^ldo[0-9]+$': + type: object + + $ref: /schemas/regulator/regulator.yaml# + + unevaluatedProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + + spmi { + #address-cells = <2>; + #size-cells = <0>; + + pmic@0 { + compatible = "hisilicon,hi6421v600-spmi"; + reg = <0 SPMI_USID>; + + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio28>; + interrupts = <0 0>; + + regulators { + ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + }; + + ldo9 { + regulator-name = "ldo9"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo15 { + regulator-name = "ldo15"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo16 { + regulator-name = "ldo16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldo17 { + regulator-name = "ldo17"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + ldo33 { + regulator-name = "ldo33"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo34 { + regulator-name = "ldo34"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml index 541b06d80e73..044cd7542c2b 100644 --- a/Documentation/devicetree/bindings/mfd/iqs62x.yaml +++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml @@ -93,7 +93,7 @@ examples: pwmleds { compatible = "pwm-leds"; - panel { + led-1 { pwms = <&iqs620a_pwm 0 1000000>; max-brightness = <255>; }; diff --git a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml new file mode 100644 index 000000000000..084960fd5a1f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/khadas,mcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Khadas on-board Microcontroller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + Khadas embeds a microcontroller on their VIM and Edge boards adding some + system feature as PWM Fan control (for VIM2 rev14 or VIM3), User memory + storage, IR/Key resume control, system power LED control and more. + +properties: + compatible: + enum: + - khadas,mcu # MCU revision is discoverable + + "#cooling-cells": # Only needed for boards having FAN control feature + const: 2 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + khadas_mcu: system-controller@18 { + compatible = "khadas,mcu"; + reg = <0x18>; + #cooling-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml new file mode 100644 index 000000000000..eb3b43547cb6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kontron's sl28cpld board management controller + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + The board management controller may contain different IP blocks like + watchdog, fan monitoring, PWM controller, interrupt controller and a + GPIO controller. + +properties: + compatible: + const: kontron,sl28cpld + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + +patternProperties: + "^gpio(@[0-9a-f]+)?$": + $ref: ../gpio/kontron,sl28cpld-gpio.yaml + + "^hwmon(@[0-9a-f]+)?$": + $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml + + "^interrupt-controller(@[0-9a-f]+)?$": + $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml + + "^pwm(@[0-9a-f]+)?$": + $ref: ../pwm/kontron,sl28cpld-pwm.yaml + + "^watchdog(@[0-9a-f]+)?$": + $ref: ../watchdog/kontron,sl28cpld-wdt.yaml + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sl28cpld@4a { + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@b { + compatible = "kontron,sl28cpld-fan"; + reg = <0xb>; + }; + + pwm@c { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xc>; + #pwm-cells = <2>; + }; + + pwm@e { + compatible = "kontron,sl28cpld-pwm"; + reg = <0xe>; + #pwm-cells = <2>; + }; + + gpio@10 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x10>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "a", "b", "c"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@15 { + compatible = "kontron,sl28cpld-gpio"; + reg = <0x15>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio@1a { + compatible = "kontron,sl28cpld-gpo"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@1b { + compatible = "kontron,sl28cpld-gpi"; + reg = <0x1b>; + + gpio-controller; + #gpio-cells = <2>; + }; + + interrupt-controller@1c { + compatible = "kontron,sl28cpld-intc"; + reg = <0x1c>; + interrupts-extended = <&gpio2 6 + IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/lp87565.txt b/Documentation/devicetree/bindings/mfd/lp87565.txt deleted file mode 100644 index 41671e0dc26b..000000000000 --- a/Documentation/devicetree/bindings/mfd/lp87565.txt +++ /dev/null @@ -1,79 +0,0 @@ -TI LP87565 PMIC MFD driver - -Required properties: - - compatible: "ti,lp87565", "ti,lp87565-q1" - - reg: I2C slave address. - - gpio-controller: Marks the device node as a GPIO Controller. - - #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../gpio/gpio.txt for more information. - - xxx-in-supply: Phandle to parent supply node of each regulator - populated under regulators node. xxx should match - the supply_name populated in driver. -Example: - -lp87565_pmic: pmic@60 { - compatible = "ti,lp87565-q1"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - - buck10-in-supply = <&vsys_3v3>; - buck23-in-supply = <&vsys_3v3>; - - regulators: regulators { - buck10_reg: buck10 { - /* VDD_MPU */ - regulator-name = "buck10"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - buck23_reg: buck23 { - /* VDD_GPU */ - regulator-name = "buck23"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-boot-on; - regulator-always-on; - }; - }; -}; - -TI LP87561 PMIC: - -This is a single output 4-phase regulator configuration - -Required properties: - - compatible: "ti,lp87561-q1" - - reg: I2C slave address. - - gpio-controller: Marks the device node as a GPIO Controller. - - #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../gpio/gpio.txt for more information. - - xxx-in-supply: Phandle to parent supply node of each regulator - populated under regulators node. xxx should match - the supply_name populated in driver. -Example: - -lp87561_pmic: pmic@62 { - compatible = "ti,lp87561-q1"; - reg = <0x62>; - gpio-controller; - #gpio-cells = <2>; - - buck3210-in-supply = <&vsys_3v3>; - - regulators: regulators { - buck3210_reg: buck3210 { - /* VDD_CORE */ - regulator-name = "buck3210"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-always-on; - regulator-boot-on; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt deleted file mode 100644 index 47e2b8bc6051..000000000000 --- a/Documentation/devicetree/bindings/mfd/madera.txt +++ /dev/null @@ -1,114 +0,0 @@ -Cirrus Logic Madera class audio codecs Multi-Functional Device - -These devices are audio SoCs with extensive digital capabilities and a range -of analogue I/O. - -See also the child driver bindings in: -bindings/pinctrl/cirrus,madera-pinctrl.txt -bindings/regulator/arizona-regulator.txt -bindings/sound/madera.txt - -Required properties: - - - compatible : One of the following chip-specific strings: - "cirrus,cs47l15" - "cirrus,cs47l35" - "cirrus,cs47l85" - "cirrus,cs47l90" - "cirrus,cs47l91" - "cirrus,cs42l92" - "cirrus,cs47l92" - "cirrus,cs47l93" - "cirrus,wm1840" - - - reg : I2C slave address when connected using I2C, chip select number when - using SPI. - - - DCVDD-supply : Power supply for the device as defined in - bindings/regulator/regulator.txt - Mandatory on CS47L15, CS47L35, CS47L90, CS47L91, CS42L92, CS47L92, CS47L93 - Optional on CS47L85, WM1840 - - - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply : - Power supplies for the device - - - DBVDD3-supply, DBVDD4-supply : Power supplies for the device - (CS47L85, CS47L90, CS47L91, WM1840) - - - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device - (CS47L85, WM1840) - - - SPKVDD-supply : Power supply for the device - (CS47L15, CS47L35) - - - interrupt-controller : Indicates that this device is an interrupt controller - - - #interrupt-cells: the number of cells to describe an IRQ, must be 2. - The first cell is the IRQ number. - The second cell is the flags, encoded as the trigger masks from - bindings/interrupt-controller/interrupts.txt - - - gpio-controller : Indicates this device is a GPIO controller. - - - #gpio-cells : Must be 2. The first cell is the pin number. The second cell - is reserved for future use and must be zero - - - interrupt-parent : The parent interrupt controller. - - - interrupts : The interrupt line the /IRQ signal for the device is - connected to. - -Optional properties: - - - MICVDD-supply : Power supply, only need to be specified if - powered externally - - - reset-gpios : One entry specifying the GPIO controlling /RESET. - As defined in bindings/gpio.txt. - Although optional, it is strongly recommended to use a hardware reset - - - clocks: Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3 - - clock-names: May contain up to three strings: - "mclk1" for the clock supplied on MCLK1, recommended to be a high - quality audio reference clock - "mclk2" for the clock supplied on MCLK2, required to be an always on - 32k clock - "mclk3" for the clock supplied on MCLK3 - - - MICBIASx : Initial data for the MICBIAS regulators, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt. - One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...) - (all codecs) - - One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...) - (all except CS47L85, WM1840) - - The following following additional property is supported for the generator - nodes: - - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling - capacitors attached. - -Optional child nodes: - micvdd : Node containing initialization data for the micvdd regulator - See bindings/regulator/arizona-regulator.txt - - ldo1 : Node containing initialization data for the LDO1 regulator - See bindings/regulator/arizona-regulator.txt - (cs47l85, wm1840) - -Example: - -cs47l85@0 { - compatible = "cirrus,cs47l85"; - reg = <0>; - - reset-gpios = <&gpio 0>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <&host_irq1>; - interrupt-parent = <&gic>; - - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt deleted file mode 100644 index 92070b346756..000000000000 --- a/Documentation/devicetree/bindings/mfd/max14577.txt +++ /dev/null @@ -1,147 +0,0 @@ -Maxim MAX14577/77836 Multi-Function Device - -MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+ -Battery Charger and SFOUT LDO output for powering USB devices. It is -interfaced to host controller using I2C. - -MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge. -For the description of Fuel Gauge low SOC alert interrupt see: -../power/supply/max17040_battery.txt - - -Required properties: -- compatible : Must be "maxim,max14577" or "maxim,max77836". -- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836) -- interrupts : IRQ line for the chip. - - -Required nodes: - - charger : - Node for configuring the charger driver. - Required properties: - - compatible : "maxim,max14577-charger" - or "maxim,max77836-charger" - - maxim,fast-charge-uamp : Current in uA for Fast Charge; - Valid values: - - for max14577: 90000 - 950000; - - for max77836: 45000 - 475000; - - maxim,eoc-uamp : Current in uA for End-Of-Charge mode; - Valid values: - - for max14577: 50000 - 200000; - - for max77836: 5000 - 100000; - - maxim,ovp-uvolt : OverVoltage Protection Threshold in uV; - In an overvoltage condition, INT asserts and charging - stops. Valid values: - - 6000000, 6500000, 7000000, 7500000; - - maxim,constant-uvolt : Battery Constant Voltage in uV; - Valid values: - - 4000000 - 4280000 (step by 20000); - - 4350000; - - -Optional nodes: -- max14577-muic/max77836-muic : - Node used only by extcon consumers. - Required properties: - - compatible : "maxim,max14577-muic" or "maxim,max77836-muic" - -- regulators : - Required properties: - - compatible : "maxim,max14577-regulator" - or "maxim,max77836-regulator" - - May contain a sub-node per regulator from the list below. Each - sub-node should contain the constraints and initialization information - for that regulator. See regulator.txt for a description of standard - properties for these sub-nodes. - - List of valid regulator names: - - for max14577: CHARGER, SAFEOUT. - - for max77836: CHARGER, SAFEOUT, LDO1, LDO2. - - The SAFEOUT is a fixed voltage regulator so there is no need to specify - voltages for it. - - -Example: - -#include <dt-bindings/interrupt-controller/irq.h> - -max14577@25 { - compatible = "maxim,max14577"; - reg = <0x25>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_NONE>; - - muic: max14577-muic { - compatible = "maxim,max14577-muic"; - }; - - regulators { - compatible = "maxim,max14577-regulator"; - - SAFEOUT { - regulator-name = "SAFEOUT"; - }; - CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <90000>; - regulator-max-microamp = <950000>; - regulator-boot-on; - }; - }; - - charger { - compatible = "maxim,max14577-charger"; - - maxim,constant-uvolt = <4350000>; - maxim,fast-charge-uamp = <450000>; - maxim,eoc-uamp = <50000>; - maxim,ovp-uvolt = <6500000>; - }; -}; - - -max77836@25 { - compatible = "maxim,max77836"; - reg = <0x25>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_NONE>; - - muic: max77836-muic { - compatible = "maxim,max77836-muic"; - }; - - regulators { - compatible = "maxim,max77836-regulator"; - - SAFEOUT { - regulator-name = "SAFEOUT"; - }; - CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <90000>; - regulator-max-microamp = <950000>; - regulator-boot-on; - }; - LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - LDO2 { - regulator-name = "LDO2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - }; - }; - - charger { - compatible = "maxim,max77836-charger"; - - maxim,constant-uvolt = <4350000>; - maxim,fast-charge-uamp = <225000>; - maxim,eoc-uamp = <7500>; - maxim,ovp-uvolt = <6500000>; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml index b0a0f0d3d9d4..4181174fcf58 100644 --- a/Documentation/devicetree/bindings/mfd/max77650.yaml +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml @@ -100,14 +100,12 @@ examples: compatible = "maxim,max77650-regulator"; max77650_ldo: regulator-ldo { - regulator-compatible = "ldo"; regulator-name = "max77650-ldo"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <2937500>; }; max77650_sbb0: regulator-sbb0 { - regulator-compatible = "sbb0"; regulator-name = "max77650-sbb0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1587500>; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt deleted file mode 100644 index 42968b7144e0..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ /dev/null @@ -1,26 +0,0 @@ -Maxim MAX77686 multi-function device - -MAX77686 is a Multifunction device with PMIC, RTC and Charger on chip. It is -interfaced to host controller using i2c interface. PMIC and Charger submodules -are addressed using same i2c slave address whereas RTC submodule uses -different i2c slave address,presently for which we are statically creating i2c -client while probing.This document describes the binding for mfd device and -PMIC submodule. - -Bindings for the built-in 32k clock generator block and -regulators are defined in ../clk/maxim,max77686.txt and -../regulator/max77686.txt respectively. - -Required properties: -- compatible : Must be "maxim,max77686"; -- reg : Specifies the i2c slave address of PMIC block. -- interrupts : This i2c device has an IRQ line connected to the main SoC. - -Example: - - max77686: pmic@9 { - compatible = "maxim,max77686"; - interrupt-parent = <&wakeup_eint>; - interrupts = <26 0>; - reg = <0x09>; - }; diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt deleted file mode 100644 index 0ced96e16c16..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ /dev/null @@ -1,194 +0,0 @@ -Maxim MAX77693 multi-function device - -MAX77693 is a Multifunction device with the following submodules: -- PMIC, -- CHARGER, -- LED, -- MUIC, -- HAPTIC - -It is interfaced to host controller using i2c. -This document describes the bindings for the mfd device. - -Required properties: -- compatible : Must be "maxim,max77693". -- reg : Specifies the i2c slave address of PMIC block. -- interrupts : This i2c device has an IRQ line connected to the main SoC. - -Optional properties: -- regulators : The regulators of max77693 have to be instantiated under subnode - named "regulators" using the following format. - - regulators { - regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER - standard regulator constraints[*]. - }; - - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - -- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide - users with tactile feedback. PWM period and duty-cycle are varied in - order to provide the appropriate level of feedback. - - Required properties: - - compatible : Must be "maxim,max77693-haptic" - - haptic-supply : power supply for the haptic motor - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - - pwms : phandle to the physical PWM(Pulse Width Modulation) device. - PWM properties should be named "pwms". And number of cell is different - for each pwm device. - To get more information, please refer to documentation. - [*] refer Documentation/devicetree/bindings/pwm/pwm.txt - -- charger : Node configuring the charger driver. - If present, required properties: - - compatible : Must be "maxim,max77693-charger". - - Optional properties (if not set, defaults will be used): - - maxim,constant-microvolt : Battery constant voltage in uV. The charger - will operate in fast charge constant current mode till battery voltage - reaches this level. Then the charger will switch to fast charge constant - voltage mode. Also vsys (system voltage) will be set to this value when - DC power is supplied but charger is not enabled. - Valid values: 3650000 - 4400000, step by 25000 (rounded down) - Default: 4200000 - - - maxim,min-system-microvolt : Minimal system voltage in uV. - Valid values: 3000000 - 3700000, step by 100000 (rounded down) - Default: 3600000 - - - maxim,thermal-regulation-celsius : Temperature in Celsius for entering - high temperature charging mode. If die temperature exceeds this value - the charging current will be reduced by 105 mA/Celsius. - Valid values: 70, 85, 100, 115 - Default: 100 - - - maxim,battery-overcurrent-microamp : Overcurrent protection threshold - in uA (current from battery to system). - Valid values: 2000000 - 3500000, step by 250000 (rounded down) - Default: 3500000 - - - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for - triggering input voltage regulation loop. If input voltage decreases - below this value, the input current will be reduced to reach the - threshold voltage. - Valid values: 4300000, 4700000, 4800000, 4900000 - Default: 4300000 - -- led : the LED submodule device node - -There are two LED outputs available - FLED1 and FLED2. Each of them can -control a separate LED or they can be connected together to double -the maximum current for a single connected LED. One LED is represented -by one child node. - -Required properties: -- compatible : Must be "maxim,max77693-led". - -Optional properties: -- maxim,boost-mode : - In boost mode the device can produce up to 1.2A of total current - on both outputs. The maximum current on each output is reduced - to 625mA then. If not enabled explicitly, boost setting defaults to - LEDS_BOOST_FIXED in case both current sources are used. - Possible values: - LEDS_BOOST_OFF (0) - no boost, - LEDS_BOOST_ADAPTIVE (1) - adaptive mode, - LEDS_BOOST_FIXED (2) - fixed mode. -- maxim,boost-mvout : Output voltage of the boost module in millivolts. - Valid values: 3300 - 5500, step by 25 (rounded down) - Default: 3300 -- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired - if chip estimates that system voltage could drop below this level due - to flash power consumption. - Valid values: 2400 - 3400, step by 33 (rounded down) - Default: 2400 - -Required properties for the LED child node: -- led-sources : see Documentation/devicetree/bindings/leds/common.txt; - device current output identifiers: 0 - FLED1, 1 - FLED2 -- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a LED connected to one FLED output: - 15625 - 250000, step by 15625 (rounded down) - Valid values for a LED connected to both FLED outputs: - 15625 - 500000, step by 15625 (rounded down) -- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a single LED connected to one FLED output - (boost mode must be turned off): - 15625 - 1000000, step by 15625 (rounded down) - Valid values for a single LED connected to both FLED outputs: - 15625 - 1250000, step by 15625 (rounded down) - Valid values for two LEDs case: - 15625 - 625000, step by 15625 (rounded down) -- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt - Valid values: 62500 - 1000000, step by 62500 (rounded down) - -Optional properties for the LED child node: -- label : see Documentation/devicetree/bindings/leds/common.txt - -Optional nodes: -- max77693-muic : - Node used only by extcon consumers. - Required properties: - - compatible : "maxim,max77693-muic" - -Example: -#include <dt-bindings/leds/common.h> - - max77693@66 { - compatible = "maxim,max77693"; - reg = <0x66>; - interrupt-parent = <&gpx1>; - interrupts = <5 2>; - - regulators { - esafeout@1 { - regulator-compatible = "ESAFEOUT1"; - regulator-name = "ESAFEOUT1"; - regulator-boot-on; - }; - esafeout@2 { - regulator-compatible = "ESAFEOUT2"; - regulator-name = "ESAFEOUT2"; - }; - charger@0 { - regulator-compatible = "CHARGER"; - regulator-name = "CHARGER"; - regulator-min-microamp = <60000>; - regulator-max-microamp = <2580000>; - regulator-boot-on; - }; - }; - - haptic { - compatible = "maxim,max77693-haptic"; - haptic-supply = <&haptic_supply>; - pwms = <&pwm 0 40000 0>; - pwm-names = "haptic"; - }; - - charger { - compatible = "maxim,max77693-charger"; - - maxim,constant-microvolt = <4200000>; - maxim,min-system-microvolt = <3600000>; - maxim,thermal-regulation-celsius = <75>; - maxim,battery-overcurrent-microamp = <3000000>; - maxim,charge-input-threshold-microvolt = <4300000>; - }; - - led { - compatible = "maxim,max77693-led"; - maxim,boost-mode = <LEDS_BOOST_FIXED>; - maxim,boost-mvout = <5000>; - maxim,mvsys-min = <2400>; - - camera_flash: flash-led { - label = "max77693-flash"; - led-sources = <0>, <1>; - led-max-microamp = <500000>; - flash-max-microamp = <1250000>; - flash-max-timeout-us = <1000000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt deleted file mode 100644 index 09decac20d91..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77802.txt +++ /dev/null @@ -1,25 +0,0 @@ -Maxim MAX77802 multi-function device - -The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high -efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power -up application processors and peripherals, a 2-channel 32kHz clock outputs, -a Real-Time-Clock (RTC) and a I2C interface to program the individual -regulators, clocks outputs and the RTC. - -Bindings for the built-in 32k clock generator block and -regulators are defined in ../clk/maxim,max77802.txt and -../regulator/max77802.txt respectively. - -Required properties: -- compatible : Must be "maxim,max77802" -- reg : Specifies the I2C slave address of PMIC block. -- interrupts : I2C device IRQ line connected to the main SoC. - -Example: - - max77802: pmic@9 { - compatible = "maxim,max77802"; - interrupt-parent = <&intc>; - interrupts = <26 IRQ_TYPE_NONE>; - reg = <0x09>; - }; diff --git a/Documentation/devicetree/bindings/mfd/max8925.txt b/Documentation/devicetree/bindings/mfd/max8925.txt deleted file mode 100644 index 4f0dc6638e5e..000000000000 --- a/Documentation/devicetree/bindings/mfd/max8925.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Maxim max8925 Power Management IC - -Required parent device properties: -- compatible : "maxim,max8925" -- reg : the I2C slave address for the max8925 chip -- interrupts : IRQ line for the max8925 chip -- interrupt-controller: describes the max8925 as an interrupt - controller (has its own domain) -- #interrupt-cells : should be 1. - - The cell is the max8925 local IRQ number - -Optional parent device properties: -- maxim,tsc-irq: there are 2 IRQ lines for max8925, one is indicated in - interrupts property, the other is indicated here. - -max8925 consists of a large and varied group of sub-devices: - -Device Supply Names Description ------- ------------ ----------- -max8925-onkey : : On key -max8925-rtc : : RTC -max8925-regulator : : Regulators -max8925-backlight : : Backlight -max8925-touch : : Touchscreen -max8925-power : : Charger - -Example: - - pmic: max8925@3c { - compatible = "maxim,max8925"; - reg = <0x3c>; - interrupts = <1>; - interrupt-parent = <&intcmux4>; - interrupt-controller; - #interrupt-cells = <1>; - maxim,tsc-irq = <0>; - - regulators { - SDV1 { - regulator-min-microvolt = <637500>; - regulator-max-microvolt = <1425000>; - regulator-boot-on; - regulator-always-on; - }; - - LDO1 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - - }; - backlight { - maxim,max8925-dual-string = <0>; - }; - charger { - batt-detect = <0>; - topoff-threshold = <1>; - fast-charge = <7>; - no-temp-support = <0>; - no-insert-detect = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt deleted file mode 100644 index 5f2f07c09c90..000000000000 --- a/Documentation/devicetree/bindings/mfd/max8998.txt +++ /dev/null @@ -1,117 +0,0 @@ -* Maxim MAX8998, National/TI LP3974 multi-function device - -The Maxim MAX8998 is a multi-function device which includes voltage/current -regulators, real time clock, battery charging controller and several -other sub-blocks. It is interfaced using an I2C interface. Each sub-block -is addressed by the host system using different i2c slave address. - -PMIC sub-block --------------- - -The PMIC sub-block contains a number of voltage and current regulators, -with controllable parameters and dynamic voltage scaling capability. -In addition, it includes a real time clock and battery charging controller -as well. It is accessible at I2C address 0x66. - -Required properties: -- compatible: Should be one of the following: - - "maxim,max8998" for Maxim MAX8998 - - "national,lp3974" or "ti,lp3974" for National/TI LP3974. -- reg: Specifies the i2c slave address of the pmic block. It should be 0x66. - -Optional properties: -- interrupts: Interrupt specifiers for two interrupt sources. - - First interrupt specifier is for main interrupt. - - Second interrupt specifier is for power-on/-off interrupt. -- max8998,pmic-buck1-dvs-gpios: GPIO specifiers for two host gpios used - for buck 1 dvs. The format of the gpio specifier depends on the gpio - controller. -- max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used - for buck 2 dvs. The format of the gpio specifier depends on the gpio - controller. -- max8998,pmic-buck1-default-dvs-idx: Default voltage setting selected from - the possible 4 options selectable by the dvs gpios. The value of this - property should be 0, 1, 2 or 3. If not specified or out of range, - a default value of 0 is taken. -- max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from - the possible 2 options selectable by the dvs gpios. The value of this - property should be 0 or 1. If not specified or out of range, a default - value of 0 is taken. -- max8998,pmic-buck-voltage-lock: If present, disallows changing of - preprogrammed buck dvfs voltages. - -Additional properties required if max8998,pmic-buck1-dvs-gpios is defined: -- max8998,pmic-buck1-dvs-voltage: An array of 4 voltage values in microvolts - for buck1 regulator that can be selected using dvs gpio. - -Additional properties required if max8998,pmic-buck2-dvs-gpio is defined: -- max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts - for buck2 regulator that can be selected using dvs gpio. - -Regulators: All the regulators of MAX8998 to be instantiated shall be -listed in a child node named 'regulators'. Each regulator is represented -by a child node of the 'regulators' node. - - regulator-name { - /* standard regulator bindings here */ - }; - -Following regulators of the MAX8998 PMIC block are supported. Note that -the 'n' in regulator name, as in LDOn or BUCKn, represents the LDO or BUCK -number as described in MAX8998 datasheet. - - - LDOn - - valid values for n are 2 to 17 - - Example: LDO2, LDO10, LDO17 - - BUCKn - - valid values for n are 1 to 4. - - Example: BUCK1, BUCK2, BUCK3, BUCK4 - - - ENVICHG: Battery Charging Current Monitor Output. This is a fixed - voltage type regulator - - - ESAFEOUT1: (ldo19) - - ESAFEOUT2: (ld020) - -Standard regulator bindings are used inside regulator subnodes. Check - Documentation/devicetree/bindings/regulator/regulator.txt -for more details. - -Example: - - pmic@66 { - compatible = "maxim,max8998-pmic"; - reg = <0x66>; - interrupt-parent = <&wakeup_eint>; - interrupts = <4 0>, <3 0>; - - /* Buck 1 DVS settings */ - max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */ - <&gpx0 1 1 0 0>; /* SET2 */ - max8998,pmic-buck1-dvs-voltage = <1350000>, <1300000>, - <1000000>, <950000>; - - /* Buck 2 DVS settings */ - max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */ - max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>; - - /* Regulators to instantiate */ - regulators { - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_ARM_1.2V"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml new file mode 100644 index 000000000000..995e96ee7445 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which + includes voltage safeout regulators, charger and MicroUSB management IC. + + The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which + includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB + management IC. + +properties: + compatible: + enum: + - maxim,max14577 + - maxim,max77836 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + wakeup-source: true + + charger: + $ref: /schemas/power/supply/maxim,max14577.yaml + + extcon: + type: object + additionalProperties: false + properties: + compatible: + enum: + - maxim,max14577-muic + - maxim,max77836-muic + + required: + - compatible + + regulators: + $ref: /schemas/regulator/maxim,max14577.yaml + +required: + - compatible + - interrupts + - reg + - charger + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max14577 + then: + properties: + charger: + properties: + compatible: + const: maxim,max14577-charger + extcon: + properties: + compatible: + const: maxim,max14577-muic + regulator: + properties: + compatible: + const: maxim,max14577-regulator + else: + properties: + charger: + properties: + compatible: + const: maxim,max77836-charger + extcon: + properties: + compatible: + const: maxim,max77836-muic + regulator: + properties: + compatible: + const: maxim,max77836-regulator + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@25 { + compatible = "maxim,max14577"; + reg = <0x25>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + extcon { + compatible = "maxim,max14577-muic"; + }; + + regulators { + compatible = "maxim,max14577-regulator"; + + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <90000>; + regulator-max-microamp = <950000>; + regulator-boot-on; + }; + }; + + charger { + compatible = "maxim,max14577-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <450000>; + maxim,eoc-uamp = <50000>; + maxim,ovp-uvolt = <6500000>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@25 { + compatible = "maxim,max77836"; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_NONE>; + reg = <0x25>; + wakeup-source; + + extcon { + compatible = "maxim,max77836-muic"; + }; + + regulators { + compatible = "maxim,max77836-regulator"; + + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <45000>; + regulator-max-microamp = <475000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "MOT_2.7V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <2700000>; + }; + + LDO2 { + regulator-name = "UNUSED_LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + }; + + charger { + compatible = "maxim,max77836-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <225000>; + maxim,eoc-uamp = <7500>; + maxim,ovp-uvolt = <6500000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml b/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml new file mode 100644 index 000000000000..0da5cae3852e --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max5970.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator for MAX5970 Smart Switch from Maxim Integrated + +maintainers: + - Patrick Rudolph <patrick.rudolph@9elements.com> + +description: | + The smart switch provides no output regulation, but independent fault protection + and voltage and current sensing. + Programming is done through I2C bus. + + Datasheets: + https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf + https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf + +properties: + compatible: + enum: + - maxim,max5970 + - maxim,max5978 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + leds: + type: object + description: + Properties for four LEDS. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^led@[0-3]$": + $ref: /schemas/leds/common.yaml# + unevaluatedProperties: false + type: object + + properties: + reg: + maximum: 3 + + additionalProperties: false + + vss1-supply: + description: Supply of the first channel. + + vss2-supply: + description: Supply of the second channel. + + regulators: + type: object + description: + Properties for both hot swap control/switch. + + patternProperties: + "^sw[0-1]$": + $ref: /schemas/regulator/regulator.yaml# + type: object + properties: + shunt-resistor-micro-ohms: + description: | + The value of current sense resistor in microohms. + + required: + - shunt-resistor-micro-ohms + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - regulators + - vss1-supply + +allOf: + - if: + properties: + compatible: + enum: + - maxim,max5970 + then: + required: + - vss2-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p3v3>; + + regulators { + sw0_ref_0: sw0 { + shunt-resistor-micro-ohms = <12000>; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + label = "led0"; + default-state = "on"; + }; + led@1 { + reg = <1>; + label = "led1"; + default-state = "on"; + }; + }; + }; + }; + + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + vss1-supply = <&p3v3>; + vss2-supply = <&p5v>; + + regulators { + sw0_ref_1: sw0 { + shunt-resistor-micro-ohms = <12000>; + }; + sw1_ref_1: sw1 { + shunt-resistor-micro-ohms = <10000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml new file mode 100644 index 000000000000..d027aabe453b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77686.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77686 Power Management IC + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for Maxim MAX77686 Power Management + Integrated Circuit (PMIC). + + The Maxim MAX77686 is a Power Management IC which includes voltage and + current regulators, RTC and clock outputs. + + The MAX77686 provides three 32.768khz clock outputs that can be controlled + (gated/ungated) over I2C. The clock IDs are defined as preprocessor macros + in dt-bindings/clock/maxim,max77686.h. + +properties: + compatible: + const: maxim,max77686 + + '#clock-cells': + const: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + voltage-regulators: + $ref: ../regulator/maxim,max77686.yaml + description: + List of child nodes that specify the regulators. + + wakeup-source: true + +required: + - compatible + - '#clock-cells' + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + max77686: pmic@9 { + compatible = "maxim,max77686"; + reg = <0x09>; + + interrupt-parent = <&gpx0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&max77686_irq>; + pinctrl-names = "default"; + wakeup-source; + #clock-cells = <1>; + + voltage-regulators { + LDO1 { + regulator-name = "VALIVE_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + LDO2 { + regulator-name = "VM1M2_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + // ... + + LDO22 { + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + // ... + + BUCK1 { + regulator-name = "VDD_MIF"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + // ... + + BUCK9 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml new file mode 100644 index 000000000000..6a6f222b868f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -0,0 +1,191 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, LED/flash, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77693 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + charger: + $ref: /schemas/power/supply/maxim,max77693.yaml + + led: + $ref: /schemas/leds/maxim,max77693.yaml + + max77693-muic: + type: object + additionalProperties: false + deprecated: true + + properties: + compatible: + const: maxim,max77693-muic + + required: + - compatible + + muic: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-muic + + connector: + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + + required: + - compatible + + motor-driver: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: ../regulator/maxim,max77693.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77693"; + reg = <0x66>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + regulators { + ESAFEOUT1 { + regulator-name = "ESAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "ESAFEOUT2"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + + muic { + compatible = "maxim,max77693-muic"; + + connector { + compatible = "samsung,usb-connector-11pin", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + muic_to_usb: endpoint { + remote-endpoint = <&usb_to_muic>; + }; + }; + + port@3 { + reg = <3>; + + muic_to_mhl: endpoint { + remote-endpoint = <&mhl_to_muic>; + }; + }; + }; + }; + }; + + motor-driver { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&ldo26_reg>; + pwms = <&pwm 0 38022 0>; + }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + + led { + compatible = "maxim,max77693-led"; + maxim,boost-mode = <LEDS_BOOST_FIXED>; + maxim,boost-mvout = <5000>; + maxim,mvsys-min = <2400>; + + flash-led { + label = "max77693-flash"; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <0>, <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1250000>; + flash-max-timeout-us = <1000000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml new file mode 100644 index 000000000000..edac14af101e --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated. + +maintainers: + - Luca Ceresoli <luca.ceresoli@bootlin.com> + +description: | + MAX77714 is a Power Management IC with 4 buck regulators, 9 + low-dropout regulators, 8 GPIOs, RTC and watchdog. + +properties: + compatible: + const: maxim,max77714 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell is the trigger type. + + regulators: + type: object + additionalProperties: false + + patternProperties: + '^(buck[0-3]|ldo[0-8])$': + type: object + unevaluatedProperties: false + $ref: /schemas/regulator/regulator.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@1c { + compatible = "maxim,max77714"; + reg = <0x1c>; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml new file mode 100644 index 000000000000..ad2013900b03 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77802 Power Management IC + +maintainers: + - Javier Martinez Canillas <javier@dowhile0.org> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for Maxim MAX77802 Power Management + Integrated Circuit (PMIC). + + The Maxim MAX77802 is a Power Management IC which includes voltage and + current regulators (10 high efficiency Buck regulators and 32 Low-DropOut + (LDO)), RTC and clock outputs. + + The MAX77802 provides two 32.768khz clock outputs that can be controlled + (gated/ungated) over I2C. The clock IDs are defined as preprocessor macros + in dt-bindings/clock/maxim,max77802.h. + +properties: + compatible: + const: maxim,max77802 + + '#clock-cells': + const: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: /schemas/regulator/maxim,max77802.yaml + description: + List of child nodes that specify the regulators. + + inb1-supply: + description: Power supply for buck1 + inb2-supply: + description: Power supply for buck2 + inb3-supply: + description: Power supply for buck3 + inb4-supply: + description: Power supply for buck4 + inb5-supply: + description: Power supply for buck5 + inb6-supply: + description: Power supply for buck6 + inb7-supply: + description: Power supply for buck7 + inb8-supply: + description: Power supply for buck8 + inb9-supply: + description: Power supply for buck9 + inb10-supply: + description: Power supply for buck10 + + inl1-supply: + description: Power supply for LDO8, LDO15 + inl2-supply: + description: Power supply for LDO17, LDO27, LDO30, LDO35 + inl3-supply: + description: Power supply for LDO3, LDO5, LDO7, LDO7 + inl4-supply: + description: Power supply for LDO10, LDO11, LDO13, LDO14 + inl5-supply: + description: Power supply for LDO9, LDO19 + inl6-supply: + description: Power supply for LDO4, LDO21, LDO24, LDO33 + inl7-supply: + description: Power supply for LDO18, LDO20, LDO28, LDO29 + inl9-supply: + description: Power supply for LDO12, LDO23, LDO25, LDO26, LDO32, LDO34 + inl10-supply: + description: Power supply for LDO1, LDO2 + + wakeup-source: true + +required: + - compatible + - '#clock-cells' + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/maxim,max77802.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + regulator-coupled-with = <&buck3_reg>; + regulator-coupled-max-spread = <300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + // ... + + BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-initial-mode = <MAX77802_OPMODE_NORMAL>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; + }; + + // ... + + LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml new file mode 100644 index 000000000000..2e2a2a86b57d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77843 MicroUSB and Companion Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for Maxim MAX77843 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77843 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, fuel-gauge, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77843 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + extcon: + $ref: /schemas/extcon/maxim,max77843.yaml + + motor-driver: + type: object + additionalProperties: false + properties: + compatible: + const: maxim,max77843-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: /schemas/regulator/maxim,max77843.yaml + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77843"; + interrupt-parent = <&gpa1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reg = <0x66>; + + extcon { + compatible = "maxim,max77843-muic"; + + connector { + compatible = "samsung,usb-connector-11pin", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* + * TODO: The DTS this is based on does not have + * port@0 which is a required property. The ports + * look incomplete and need fixing. + * Add a disabled port just to satisfy dtschema. + */ + reg = <0>; + status = "disabled"; + }; + + port@3 { + reg = <3>; + endpoint { + remote-endpoint = <&mhl_to_musb_con>; + }; + }; + }; + }; + + ports { + port { + endpoint { + remote-endpoint = <&usb_to_muic>; + }; + }; + }; + }; + + regulators { + compatible = "maxim,max77843-regulator"; + + SAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + SAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <100000>; + regulator-max-microamp = <3150000>; + }; + }; + + motor-driver { + compatible = "maxim,max77843-haptic"; + haptic-supply = <&ldo38_reg>; + pwms = <&pwm 0 33670 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max8925.yaml b/Documentation/devicetree/bindings/mfd/maxim,max8925.yaml new file mode 100644 index 000000000000..86dd810851ab --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max8925.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max8925.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX8925 PMIC from Maxim Integrated. + +maintainers: + - Lee Jones <lee@kernel.org> + +properties: + compatible: + const: maxim,max8925 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + description: + The cell is the IRQ number + + maxim,tsc-irq: + description: second interrupt from max8925 + $ref: /schemas/types.yaml#/definitions/uint32 + + regulators: + type: object + + patternProperties: + "^SDV[1-3]$|^LDO[1-9]$|^LDO1[0-9]$|^LDO20$": + description: regulator configuration for SDV1-3 and LDO1-20 + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false + + additionalProperties: false + + backlight: + type: object + properties: + maxim,max8925-dual-string: + description: set to 1 to support dual string + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + additionalProperties: false + + charger: + type: object + properties: + batt-detect: + description: set to 1 if battery detection via ID pin is supported + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + topoff-threshold: + description: charging current in topoff mode, configures bits 5-6 in CHG_CNTL1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + + fast-charge: + description: set charging current in fast mode, configures bits 0-3 in CHG_CNTL1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + default: 0 + + no-temp-support: + description: set to 1 if temperature sensing is not supported + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + no-insert-detect: + description: set to 1 if AC detection is not supported + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@3c { + compatible = "maxim,max8925"; + reg = <0x3c>; + interrupts = <1>; + interrupt-parent = <&intcmux4>; + interrupt-controller; + #interrupt-cells = <1>; + maxim,tsc-irq = <0>; + + regulators { + SDV1 { + regulator-min-microvolt = <637500>; + regulator-max-microvolt = <1425000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO1 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + }; + + backlight { + maxim,max8925-dual-string = <0>; + }; + + charger { + batt-detect = <0>; + topoff-threshold = <1>; + fast-charge = <7>; + no-temp-support = <0>; + no-insert-detect = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max8998.yaml b/Documentation/devicetree/bindings/mfd/maxim,max8998.yaml new file mode 100644 index 000000000000..f3c3f64fd012 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max8998.yaml @@ -0,0 +1,324 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max8998.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8998, National/TI LP3974 Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: + The Maxim MAX8998 is a Power Management IC which includes voltage/current + regulators, real time clock, battery charging controller and several other + sub-blocks. It is interfaced using an I2C interface. Each sub-block is + addressed by the host system using different i2c slave address. + +properties: + compatible: + enum: + - maxim,max8998 + - national,lp3974 + - ti,lp3974 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: Main interrupt + - description: Power-on/-off interrupt + + max8998,pmic-buck1-dvs-gpios: + maxItems: 2 + description: + Two host gpios used for buck1 DVS. + + max8998,pmic-buck2-dvs-gpio: + maxItems: 1 + description: + Host gpio used for buck2 DVS. + + max8998,pmic-buck1-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Default voltage setting selected from the possible 4 options selectable + by the DVS gpios. + + max8998,pmic-buck2-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + description: + Default voltage setting selected from the possible 2 options selectable + by the DVS GPIOs. + + max8998,pmic-buck-voltage-lock: + type: boolean + description: + If present, disallows changing of preprogrammed buck DVS voltages. + + max8998,pmic-buck1-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 4 + description: + Four voltage values in microvolts for buck1 regulator that can be + selected using DVS GPIO. + + max8998,pmic-buck2-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + description: + Two voltage values in microvolts for buck2 regulator that can be + selected using DVS GPIO. + + regulators: + type: object + additionalProperties: false + + properties: + CHARGER: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + description: + CHARGER is main battery charger current control, wrongly represented + as regulator. + + properties: + regulator-min-microamp: + minimum: 90000 + maximum: 800000 + + regulator-max-microamp: + minimum: 90000 + maximum: 800000 + + regulator-min-microvolt: false + regulator-max-microvolt: false + + required: + - regulator-name + + patternProperties: + "^(LDO([2-9]|1[0-7])|BUCK[1-4])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + required: + - regulator-name + + "^(EN32KHz-AP|EN32KHz-CP|ENVICHG|ESAFEOUT[12])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + description: | + EN32KHz-AP and EN32KHz-CP are 32768 Hz clocks, wrongly represented as + regulators. + ENVICHG is a Battery Charging Current Monitor Output. + + properties: + regulator-min-microvolt: false + regulator-max-microvolt: false + + required: + - regulator-name + +dependencies: + max8998,pmic-buck1-dvs-gpios: [ "max8998,pmic-buck1-dvs-voltage" ] + max8998,pmic-buck2-dvs-gpio: [ "max8998,pmic-buck2-dvs-voltage" ] + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>, + <&gpx2 7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&lp3974_irq>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, + <1100000>, <1000000>; + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; + + regulators { + LDO2 { + regulator-name = "VALIVE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + }; + + LDO7 { + regulator-name = "VLCD+VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + LDO9 { + regulator-name = "VCC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO11 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + LDO12 { + regulator-name = "PS_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + LDO13 { + regulator-name = "VHIC_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + LDO14 { + regulator-name = "CAM_I_HOST_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO15 { + regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + LDO16 { + regulator-name = "CAM_S_ANA_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + LDO17 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + BUCK1 { + regulator-name = "VINT_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + BUCK2 { + regulator-name = "VG3D_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + }; + + BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + BUCK4 { + regulator-name = "VMEM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + + EN32KHz-CP { + regulator-name = "32KHz CP"; + }; + + ENVICHG { + regulator-name = "VICHG"; + }; + + ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml new file mode 100644 index 000000000000..37423c2e0fdf --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt6357.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6357 PMIC + +maintainers: + - Flora Fu <flora.fu@mediatek.com> + - Alexandre Mergnat <amergnat@baylibre.com> + +description: | + MT6357 is a power management system chip containing 5 buck + converters and 29 LDOs. Supported features are audio codec, + USB battery charging, fuel gauge, RTC + + This is a multifunction device with the following sub modules: + - Regulator + - RTC + - Keys + + It is interfaced to host controller using SPI interface by a proprietary hardware + called PMIC wrapper or pwrap. This MFD is a child device of pwrap. + See the following for pwrap node definitions: + Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml + +properties: + compatible: + const: mediatek,mt6357 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + regulators: + type: object + $ref: /schemas/regulator/mediatek,mt6357-regulator.yaml + unevaluatedProperties: false + description: + List of MT6357 BUCKs and LDOs regulators. + + rtc: + type: object + $ref: /schemas/rtc/rtc.yaml# + unevaluatedProperties: false + description: + MT6357 Real Time Clock. + properties: + compatible: + const: mediatek,mt6357-rtc + start-year: true + required: + - compatible + + keys: + type: object + $ref: /schemas/input/mediatek,pmic-keys.yaml + unevaluatedProperties: false + description: + MT6357 power and home keys. + +required: + - compatible + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pwrap { + pmic { + compatible = "mediatek,mt6357"; + + interrupt-parent = <&pio>; + interrupts = <145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + mt6357_vproc_reg: buck-vproc { + regulator-name = "vproc"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + + // ... + + mt6357_vusb33_reg: ldo-vusb33 { + regulator-name = "vusb33"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + }; + + rtc { + compatible = "mediatek,mt6357-rtc"; + }; + + keys { + compatible = "mediatek,mt6357-keys"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml new file mode 100644 index 000000000000..fb65abf30d57 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml @@ -0,0 +1,247 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6360 PMIC from MediaTek Integrated + +maintainers: + - Gene Chen <gene_chen@richtek.com> + +description: | + MT6360 is a PMIC device with the following sub modules. + It is interfaced to host controller using I2C interface. + + This document describes the binding for PMIC device and its sub module. + +properties: + compatible: + const: mediatek,mt6360 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + interrupt-names: + const: IRQB + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + description: + The first cell is the IRQ number. + + regulators: + $ref: /schemas/regulator/mt6360-regulator.yaml# + + charger: + $ref: /schemas/power/supply/mt6360_charger.yaml# + + tcpc: + $ref: /schemas/usb/mediatek,mt6360-tcpc.yaml# + + led-controller: + $ref: /schemas/leds/leds-mt6360.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/mediatek,mt6360-regulator.h> + #include <dt-bindings/leds/common.h> + #include <dt-bindings/usb/pd.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + wakeup-source; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "IRQB"; + interrupt-controller; + #interrupt-cells = <1>; + + mt6360_charger: charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; + + led-controller { + compatible = "mediatek,mt6360-led"; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RGB>; + led-max-microamp = <24000>; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <150000>; + }; + led@4 { + reg = <4>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + led@5 { + reg = <5>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + }; + + regulators { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&BUCK2>; + buck1 { + regulator-name = "mt6360,buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + }; + BUCK2: buck2 { + regulator-name = "mt6360,buck2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + }; + ldo6 { + regulator-name = "mt6360,ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo7 { + regulator-name = "mt6360,ldo7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo1 { + regulator-name = "mt6360,ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo2 { + regulator-name = "mt6360,ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo3 { + regulator-name = "mt6360,ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo5 { + regulator-name = "mt6360,ldo5"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + }; + + tcpc { + compatible = "mediatek,mt6360-tcpc"; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "PD_IRQB"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml new file mode 100644 index 000000000000..c9574b243046 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml @@ -0,0 +1,282 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt6370.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6370 SubPMIC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + MT6370 is a highly-integrated smart power management IC, which includes a + single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C & + Power Delivery (PD) controller, dual flash LED current sources, a RGB LED + driver, a backlight WLED driver, a display bias driver and a general LDO for + portable devices. + +properties: + compatible: + const: mediatek,mt6370 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + adc: + type: object + additionalProperties: false + description: | + Provides 9 channels for system monitoring, including VBUSDIV5 (lower + accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower + measure range), VBAT, VSYS, CHG_VDDP, TS_BAT, IBUS, IBAT, and TEMP_JC. + + properties: + compatible: + const: mediatek,mt6370-adc + + "#io-channel-cells": + const: 1 + + required: + - compatible + - "#io-channel-cells" + + backlight: + type: object + $ref: /schemas/leds/backlight/mediatek,mt6370-backlight.yaml# + + charger: + type: object + $ref: /schemas/power/supply/mediatek,mt6370-charger.yaml# + + tcpc: + type: object + $ref: /schemas/usb/mediatek,mt6370-tcpc.yaml# + + indicator: + type: object + $ref: /schemas/leds/mediatek,mt6370-indicator.yaml# + + flashlight: + type: object + $ref: /schemas/leds/mediatek,mt6370-flashlight.yaml# + + regulators: + type: object + additionalProperties: false + description: | + List all supported regulators, which support the control for DisplayBias + voltages and one general purpose LDO which commonly used to drive the + vibrator. + + patternProperties: + "^(dsvbst|vibldo)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + "^(dsvpos|dsvneg)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + properties: + enable-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - regulators + - adc + - backlight + - indicator + - tcpc + - charger + - flashlight + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + #include <dt-bindings/iio/adc/mediatek,mt6370_adc.h> + #include <dt-bindings/usb/pd.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "mediatek,mt6370"; + reg = <0x34>; + wakeup-source; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + mt6370_adc: adc { + compatible = "mediatek,mt6370-adc"; + #io-channel-cells = <1>; + }; + + backlight { + compatible = "mediatek,mt6370-backlight"; + mediatek,bled-channel-use = /bits/ 8 <15>; + }; + + charger { + compatible = "mediatek,mt6370-charger"; + interrupts = <68>, <48>, <6>; + interrupt-names = "uvp_d_evt", "attach_i", "mivr"; + io-channels = <&mt6370_adc MT6370_CHAN_IBUS>; + + mt6370_otg_vbus: usb-otg-vbus-regulator { + regulator-name = "mt6370-usb-otg-vbus"; + regulator-min-microvolt = <4350000>; + regulator-max-microvolt = <5800000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + }; + }; + + indicator { + compatible = "mediatek,mt6370-indicator"; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RGB>; + led-max-microamp = <24000>; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <6000>; + }; + }; + + flashlight { + compatible = "mediatek,mt6370-flashlight"; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + led-sources = <0>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1248000>; + }; + led@1 { + reg = <1>; + led-sources = <1>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1248000>; + }; + }; + + tcpc { + compatible = "mediatek,mt6370-tcpc"; + interrupts-extended = <&gpio26 4 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + vbus-supply = <&mt6370_otg_vbus>; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + + regulators { + dsvbst { + regulator-name = "mt6370-dsv-vbst"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6200000>; + }; + dsvpos { + regulator-name = "mt6370-dsv-vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + dsvneg { + regulator-name = "mt6370-dsv-vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + vibldo { + regulator-name = "mt6370-vib-ldo"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <4000000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml new file mode 100644 index 000000000000..c8c4812fffe2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt8195-scpsys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek System Control Processor System + +maintainers: + - MandyJH Liu <mandyjh.liu@mediatek.com> + +description: + MediaTek System Control Processor System (SCPSYS) has several + power management tasks. The tasks include MTCMOS power + domain control, thermal measurement, DVFS, etc. + +properties: + compatible: + items: + - enum: + - mediatek,mt8167-scpsys + - mediatek,mt8173-scpsys + - mediatek,mt8183-scpsys + - mediatek,mt8186-scpsys + - mediatek,mt8192-scpsys + - mediatek,mt8195-scpsys + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + power-controller: + $ref: /schemas/power/mediatek,power-controller.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/power/mt8195-power.h> + + syscon@10006000 { + compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd"; + reg = <0x10006000 0x100>; + + spm: power-controller { + compatible = "mediatek,mt8195-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* sample of power domain nodes */ + power-domain@MT8195_POWER_DOMAIN_PCIE_PHY { + reg = <MT8195_POWER_DOMAIN_PCIE_PHY>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY { + reg = <MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>; + #power-domain-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt index 5ddcc8f4febc..190230216de8 100644 --- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt +++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt @@ -16,14 +16,14 @@ Optional subnodes: The sub-functions of CPCAP get their own node with their own compatible values, which are described in the following files: -- ../power/supply/cpcap-battery.txt -- ../power/supply/cpcap-charger.txt -- ../regulator/cpcap-regulator.txt -- ../phy/phy-cpcap-usb.txt -- ../input/cpcap-pwrbutton.txt -- ../rtc/cpcap-rtc.txt -- ../leds/leds-cpcap.txt -- ../iio/adc/cpcap-adc.txt +- Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml +- Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml +- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt +- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt +- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt +- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt +- Documentation/devicetree/bindings/leds/leds-cpcap.txt +- Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml The only exception is the audio codec. Instead of a compatible value its node must be named "audio-codec". diff --git a/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml new file mode 100644 index 000000000000..5ba849d78d8a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mps,mp2629.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MP2629 Battery Charger PMIC from Monolithic Power System. + +maintainers: + - Saravanan Sekar <sravanhome@gmail.com> + +description: | + MP2629 is a PMIC providing battery charging and power supply for smartphones, + wireless camera and portable devices. Chip is controlled over I2C. + + The battery charge management device handles battery charger controller and + ADC IIO device for battery, system voltage + +properties: + compatible: + enum: + - mps,mp2629 + - mps,mp2733 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell is the trigger type. + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/linux-event-codes.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@4b { + compatible = "mps,mp2629"; + reg = <0x4b>; + + interrupt-controller; + interrupt-parent = <&gpio2>; + #interrupt-cells = <2>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml new file mode 100644 index 000000000000..8bd1abfc44d9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mscc,ocelot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ocelot Externally-Controlled Ethernet Switch + +maintainers: + - Colin Foster <colin.foster@in-advantage.com> + +description: | + The Ocelot ethernet switch family contains chips that have an internal CPU + (VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have + the option to be controlled externally via external interfaces like SPI or + PCIe. + + The switch family is a multi-port networking switch that supports many + interfaces. Additionally, the device can perform pin control, MDIO buses, and + external GPIO expanders. + +properties: + compatible: + enum: + - mscc,vsc7512 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + spi-max-frequency: + maxItems: 1 + +patternProperties: + "^pinctrl@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/mscc,ocelot-pinctrl.yaml + + "^gpio@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/microchip,sparx5-sgpio.yaml + properties: + compatible: + enum: + - mscc,ocelot-sgpio + + "^mdio@[0-9a-f]+$": + type: object + $ref: /schemas/net/mscc,miim.yaml + properties: + compatible: + enum: + - mscc,ocelot-miim + + "^ethernet-switch@[0-9a-f]+$": + type: object + $ref: /schemas/net/mscc,vsc7514-switch.yaml + unevaluatedProperties: false + properties: + compatible: + enum: + - mscc,vsc7512-switch + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + ocelot_clock: ocelot-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + soc@0 { + compatible = "mscc,vsc7512"; + spi-max-frequency = <2500000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + mdio@7107009c { + compatible = "mscc,ocelot-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7107009c 0x24>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; + + mdio@710700c0 { + compatible = "mscc,ocelot-miim"; + pinctrl-names = "default"; + pinctrl-0 = <&miim1_pins>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x710700c0 0x24>; + + sw_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + }; + + gpio: pinctrl@71070034 { + compatible = "mscc,ocelot-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + reg = <0x71070034 0x6c>; + + sgpio_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3"; + function = "sg0"; + }; + + miim1_pins: miim1-pins { + pins = "GPIO_14", "GPIO_15"; + function = "miim"; + }; + }; + + gpio@710700f8 { + compatible = "mscc,ocelot-sgpio"; + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <12500000>; + clocks = <&ocelot_clock>; + microchip,sgpio-port-ranges = <0 15>; + pinctrl-names = "default"; + pinctrl-0 = <&sgpio_pins>; + reg = <0x710700f8 0x100>; + + sgpio_in0: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <64>; + }; + + sgpio_out1: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <64>; + }; + }; + }; + }; + +... + diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index a9b105ac00a8..10540aa7afa1 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -13,29 +13,41 @@ MT6397/MT6323 is a multifunction device with the following sub modules: It is interfaced to host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. See the following for pwarp node definitions: -../soc/mediatek/pwrap.txt +../soc/mediatek/mediatek,pwrap.yaml This document describes the binding for MFD device and its sub module. Required properties: -compatible: "mediatek,mt6397" or "mediatek,mt6323" +compatible: + "mediatek,mt6323" for PMIC MT6323 + "mediatek,mt6331" for PMIC MT6331 and MT6332 + "mediatek,mt6357" for PMIC MT6357 + "mediatek,mt6358" for PMIC MT6358 + "mediatek,mt6359" for PMIC MT6359 + "mediatek,mt6366", "mediatek,mt6358" for PMIC MT6366 + "mediatek,mt6397" for PMIC MT6397 Optional subnodes: - rtc Required properties: Should be one of follows - compatible: "mediatek,mt6323-rtc" + - compatible: "mediatek,mt6331-rtc" + - compatible: "mediatek,mt6358-rtc" - compatible: "mediatek,mt6397-rtc" For details, see ../rtc/rtc-mt6397.txt - regulators Required properties: - - compatible: "mediatek,mt6397-regulator" - see ../regulator/mt6397-regulator.txt - compatible: "mediatek,mt6323-regulator" see ../regulator/mt6323-regulator.txt + - compatible: "mediatek,mt6358-regulator" + - compatible: "mediatek,mt6366-regulator", "mediatek-mt6358-regulator" + see ../regulator/mt6358-regulator.txt + - compatible: "mediatek,mt6397-regulator" + see ../regulator/mt6397-regulator.txt - codec Required properties: - - compatible: "mediatek,mt6397-codec" + - compatible: "mediatek,mt6397-codec" or "mediatek,mt6358-sound" - clk Required properties: - compatible: "mediatek,mt6397-clk" @@ -45,8 +57,10 @@ Optional subnodes: see ../leds/leds-mt6323.txt - keys - Required properties: - - compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys" + Required properties: Should be one of the following + - compatible: "mediatek,mt6323-keys" + - compatible: "mediatek,mt6331-keys" + - compatible: "mediatek,mt6397-keys" see ../input/mtk-pmic-keys.txt - power-controller @@ -54,6 +68,11 @@ Optional subnodes: - compatible: "mediatek,mt6323-pwrc" For details, see ../power/reset/mt6323-poweroff.txt +- pin-controller + Required properties: + - compatible: "mediatek,mt6397-pinctrl" + For details, see ../pinctrl/pinctrl-mt65xx.txt + Example: pwrap: pwrap@1000f000 { compatible = "mediatek,mt8135-pwrap"; diff --git a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml new file mode 100644 index 000000000000..59a630025f52 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/netronix,ntxec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Netronix Embedded Controller + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@gmx.net> + +description: | + This EC is found in e-book readers of multiple brands (e.g. Kobo, Tolino), and + is typically implemented as a TI MSP430 microcontroller. + +properties: + compatible: + const: netronix,ntxec + + reg: + items: + - description: The I2C address of the EC + + system-power-controller: + type: boolean + description: See Documentation/devicetree/bindings/power/power-controller.txt + + interrupts: + minItems: 1 + description: + The EC can signal interrupts via a GPIO line + + "#pwm-cells": + const: 2 + description: | + Number of cells in a PWM specifier. + + The following PWM channels are supported: + - 0: The PWM channel controlled by registers 0xa1-0xa7 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ec: embedded-controller@43 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ntxec>; + + compatible = "netronix,ntxec"; + reg = <0x43>; + system-power-controller; + interrupt-parent = <&gpio4>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + #pwm-cells = <2>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ec 0 50000>; + power-supply = <&backlight_regulator>; + }; + + backlight_regulator: regulator-dummy { + compatible = "regulator-fixed"; + regulator-name = "backlight"; + }; diff --git a/Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml b/Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml new file mode 100644 index 000000000000..b1ade64a1554 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/nxp,bbnsm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Battery-Backed Non-Secure Module + +maintainers: + - Jacky Bai <ping.bai@nxp.com> + +description: | + NXP BBNSM serves as non-volatile logic and storage for the system. + it Intergrates RTC & ON/OFF control. + The RTC can retain its state and continues counting even when the + main chip is power down. A time alarm is generated once the most + significant 32 bits of the real-time counter match the value in the + Time Alarm register. + The ON/OFF logic inside the BBNSM allows for connecting directly to + a PMIC or other voltage regulator device. both smart PMIC mode and + Dumb PMIC mode supported. + +properties: + compatible: + items: + - enum: + - nxp,imx93-bbnsm + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + rtc: + type: object + $ref: /schemas/rtc/rtc.yaml# + + properties: + compatible: + enum: + - nxp,imx93-bbnsm-rtc + + interrupts: + maxItems: 1 + + start-year: true + + required: + - compatible + - interrupts + + additionalProperties: false + + pwrkey: + type: object + $ref: /schemas/input/input.yaml# + + properties: + compatible: + enum: + - nxp,imx93-bbnsm-pwrkey + + interrupts: + maxItems: 1 + + linux,code: true + + required: + - compatible + - interrupts + + additionalProperties: false + +required: + - compatible + - reg + - rtc + - pwrkey + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/linux-event-codes.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bbnsm: bbnsm@44440000 { + compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd"; + reg = <0x44440000 0x10000>; + + bbnsm_rtc: rtc { + compatible = "nxp,imx93-bbnsm-rtc"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + }; + + bbnsm_pwrkey: pwrkey { + compatible = "nxp,imx93-bbnsm-pwrkey"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + linux,code = <KEY_POWER>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt index aa1eaa59581b..a0d8c30c2631 100644 --- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt +++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt @@ -64,8 +64,8 @@ Required properties if child node exists: Properties for children: The OMAP HS USB Host subsystem contains EHCI and OHCI controllers. -See Documentation/devicetree/bindings/usb/ehci-omap.txt and -Documentation/devicetree/bindings/usb/ohci-omap3.txt. +See Documentation/devicetree/bindings/usb/generic-ehci.yaml and +Documentation/devicetree/bindings/usb/generic-ohci.yaml. Example for OMAP4: @@ -78,14 +78,14 @@ usbhshost: usbhshost@4a064000 { ranges; usbhsohci: ohci@4a064800 { - compatible = "ti,ohci-omap3", "usb-ohci"; + compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; interrupt-parent = <&gic>; interrupts = <0 76 0x4>; }; usbhsehci: ehci@4a064c00 { - compatible = "ti,ehci-omap", "usb-ehci"; + compatible = "ti,ehci-omap"; reg = <0x4a064c00 0x400>; interrupt-parent = <&gic>; interrupts = <0 77 0x4>; diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml new file mode 100644 index 000000000000..0c75d8bde568 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. PM8008 PMIC + +maintainers: + - Guru Das Srinagesh <quic_gurus@quicinc.com> + +description: | + Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates + all the necessary power management, housekeeping, and interface support + functions into a single IC. + +properties: + compatible: + const: qcom,pm8008 + + reg: + description: + I2C slave address. + + maxItems: 1 + + interrupts: + maxItems: 1 + + description: Parent interrupt. + + "#interrupt-cells": + const: 2 + + description: | + The first cell is the IRQ number, the second cell is the IRQ trigger + flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h. + + interrupt-controller: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^gpio@[0-9a-f]+$": + type: object + + description: | + The GPIO peripheral. This node may be specified twice, one for each GPIO. + + properties: + compatible: + items: + - const: qcom,pm8008-gpio + - const: qcom,spmi-gpio + + reg: + description: Peripheral address of one of the two GPIO peripherals. + maxItems: 1 + + gpio-controller: true + + gpio-ranges: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + "#gpio-cells": + const: 2 + + required: + - compatible + - reg + - gpio-controller + - interrupt-controller + - "#gpio-cells" + - gpio-ranges + - "#interrupt-cells" + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/mfd/qcom-pm8008.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <32 IRQ_TYPE_EDGE_RISING>; + + pm8008_gpios: gpio@c000 { + compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8008_gpios 0 0 2>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt deleted file mode 100644 index fffc8fde3302..000000000000 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt +++ /dev/null @@ -1,80 +0,0 @@ - Qualcomm SPMI PMICs multi-function device bindings - -The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084 -PMICs. These PMICs use a QPNP scheme through SPMI interface. -QPNP is effectively a partitioning scheme for dividing the SPMI extended -register space up into logical pieces, and set of fixed register -locations/definitions within these regions, with some of these regions -specifically used for interrupt handling. - -The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are -interfaced to the chip via the SPMI (System Power Management Interface) bus. -Support for multiple independent functions are implemented by splitting the -16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes -each. A function can consume one or more of these fixed-size register regions. - -Required properties: -- compatible: Should contain one of: - "qcom,pm8941", - "qcom,pm8841", - "qcom,pma8084", - "qcom,pm8019", - "qcom,pm8226", - "qcom,pm8110", - "qcom,pma8084", - "qcom,pmi8962", - "qcom,pmd9635", - "qcom,pm8994", - "qcom,pmi8994", - "qcom,pm8916", - "qcom,pm8004", - "qcom,pm8909", - "qcom,pm8950", - "qcom,pmi8950", - "qcom,pm8998", - "qcom,pmi8998", - "qcom,pm8005", - or generalized "qcom,spmi-pmic". -- reg: Specifies the SPMI USID slave address for this device. - For more information see: - Documentation/devicetree/bindings/spmi/spmi.txt - -Required properties for peripheral child nodes: -- compatible: Should contain "qcom,xxx", where "xxx" is a peripheral name. - -Optional properties for peripheral child nodes: -- interrupts: Interrupts are specified as a 4-tuple. For more information - see: - Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt -- interrupt-names: Corresponding interrupt name to the interrupts property - -Each child node of SPMI slave id represents a function of the PMIC. In the -example below the rtc device node represents a peripheral of pm8941 -SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1. - -Example: - - spmi { - compatible = "qcom,spmi-pmic-arb"; - - pm8941@0 { - compatible = "qcom,pm8941", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - - rtc { - compatible = "qcom,rtc"; - interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "alarm"; - }; - }; - - pm8941@1 { - compatible = "qcom,pm8941", "qcom,spmi-pmic"; - reg = <0x1 SPMI_USID>; - - regulator { - compatible = "qcom,regulator"; - regulator-name = "8941_boost"; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml new file mode 100644 index 000000000000..8103fb61a16c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -0,0 +1,349 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI PMICs multi-function device + +description: | + Some Qualcomm PMICs used with the Snapdragon series SoCs are interfaced + to the chip via the SPMI (System Power Management Interface) bus. + Support for multiple independent functions are implemented by splitting the + 16-bit SPMI peripheral address space into 256 smaller fixed-size regions, 256 bytes + each. A function can consume one or more of these fixed-size register regions. + + The Qualcomm SPMI series includes the PM8941, PM8841, PMA8084, PM8998 and other + PMICs. These PMICs use a "QPNP" scheme through SPMI interface. + QPNP is effectively a partitioning scheme for dividing the SPMI extended + register space up into logical pieces, and set of fixed register + locations/definitions within these regions, with some of these regions + specifically used for interrupt handling. + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + +properties: + $nodename: + oneOf: + - pattern: '^pmic@.*$' + - pattern: '^pm(a|s)?[0-9]*@.*$' + deprecated: true + + compatible: + items: + - enum: + - qcom,pm2250 + - qcom,pm6125 + - qcom,pm6150 + - qcom,pm6150l + - qcom,pm6350 + - qcom,pm660 + - qcom,pm660l + - qcom,pm7250b + - qcom,pm7550ba + - qcom,pm7325 + - qcom,pm8004 + - qcom,pm8005 + - qcom,pm8009 + - qcom,pm8010 + - qcom,pm8019 + - qcom,pm8028 + - qcom,pm8110 + - qcom,pm8150 + - qcom,pm8150b + - qcom,pm8150c + - qcom,pm8150l + - qcom,pm8226 + - qcom,pm8350 + - qcom,pm8350b + - qcom,pm8350c + - qcom,pm8450 + - qcom,pm8550 + - qcom,pm8550b + - qcom,pm8550ve + - qcom,pm8550vs + - qcom,pm8841 + - qcom,pm8909 + - qcom,pm8916 + - qcom,pm8937 + - qcom,pm8941 + - qcom,pm8950 + - qcom,pm8953 + - qcom,pm8994 + - qcom,pm8998 + - qcom,pma8084 + - qcom,pmc8180 + - qcom,pmc8180c + - qcom,pmd9635 + - qcom,pmi632 + - qcom,pmi8950 + - qcom,pmi8962 + - qcom,pmi8994 + - qcom,pmi8998 + - qcom,pmk8002 + - qcom,pmk8350 + - qcom,pmk8550 + - qcom,pmm8155au + - qcom,pmm8654au + - qcom,pmp8074 + - qcom,pmr735a + - qcom,pmr735b + - qcom,pmr735d + - qcom,pms405 + - qcom,pmx55 + - qcom,pmx65 + - qcom,pmx75 + - qcom,smb2351 + - const: qcom,spmi-pmic + + reg: + minItems: 1 + maxItems: 2 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + labibb: + type: object + $ref: /schemas/regulator/qcom-labibb-regulator.yaml# + + regulators: + type: object + $ref: /schemas/regulator/qcom,spmi-regulator.yaml# + + pwm: + type: object + $ref: /schemas/leds/leds-qcom-lpg.yaml# + +patternProperties: + "^adc@[0-9a-f]+$": + type: object + oneOf: + - $ref: /schemas/iio/adc/qcom,spmi-iadc.yaml# + - $ref: /schemas/iio/adc/qcom,spmi-rradc.yaml# + - $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml# + + "^adc-tm@[0-9a-f]+$": + type: object + # ref depends on compatible, see allOf below + + "^audio-codec@[0-9a-f]+$": + type: object + $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml# + + "^battery@[0-9a-f]+$": + type: object + oneOf: + - $ref: /schemas/power/supply/qcom,pm8916-bms-vm.yaml# + + "^charger@[0-9a-f]+$": + type: object + oneOf: + - $ref: /schemas/power/supply/qcom,pm8916-lbc.yaml# + - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml# + - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml# + - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml# + + "gpio@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml# + + "^led-controller@[0-9a-f]+$": + type: object + $ref: /schemas/leds/qcom,spmi-flash-led.yaml# + + "^nvram@[0-9a-f]+$": + type: object + $ref: /schemas/nvmem/qcom,spmi-sdam.yaml# + + "phy@[0-9a-f]+$": + type: object + $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml# + + "pon@[0-9a-f]+$": + type: object + $ref: /schemas/power/reset/qcom,pon.yaml# + + "^rtc@[0-9a-f]+$": + type: object + $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml# + + "^temp-alarm@[0-9a-f]+$": + type: object + $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml# + + "^typec@[0-9a-f]+$": + type: object + $ref: /schemas/usb/qcom,pmic-typec.yaml# + + "^usb-detect@[0-9a-f]+$": + type: object + $ref: /schemas/extcon/qcom,pm8941-misc.yaml# + + "^usb-vbus-regulator@[0-9a-f]+$": + type: object + $ref: /schemas/regulator/qcom,usb-vbus-regulator.yaml# + + "^vibrator@[0-9a-f]+$": + type: object + $ref: /schemas/input/qcom,pm8xxx-vib.yaml# + + "^mpps@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml# + + "(.*)?(wled|leds)@[0-9a-f]+$": + type: object + $ref: /schemas/leds/backlight/qcom-wled.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8998 + then: + patternProperties: + "^adc-tm@[0-9a-f]+$": + $ref: /schemas/thermal/qcom-spmi-adc-tm-hc.yaml# + else: + patternProperties: + "^adc-tm@[0-9a-f]+$": + $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml# + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0c440000 0x1100>, + <0x0c600000 0x2000000>, + <0x0e600000 0x100000>, + <0x0e700000 0xa0000>, + <0x0c40a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + + pmic@2 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@c000 { + compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmi8998_gpio 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/iio/qcom,spmi-vadc.h> + #include <dt-bindings/spmi/spmi.h> + + pmic@0 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm6150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm6150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@6 { + reg = <ADC5_DIE_TEMP>; + label = "die_temp"; + }; + + channel@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + }; + + adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + charger-thermistor@0 { + reg = <0>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + }; + + gpio@c000 { + compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6150_gpio 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt b/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt deleted file mode 100644 index e90519d566a3..000000000000 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt +++ /dev/null @@ -1,22 +0,0 @@ -QCOM Top Control and Status Register - -Qualcomm devices have a set of registers that provide various control and status -functions for their peripherals. This node is intended to allow access to these -registers via syscon. - -Required properties: -- compatible: Should contain: - "qcom,tcsr-ipq8064", "syscon" for IPQ8064 - "qcom,tcsr-apq8064", "syscon" for APQ8064 - "qcom,tcsr-msm8660", "syscon" for MSM8660 - "qcom,tcsr-msm8960", "syscon" for MSM8960 - "qcom,tcsr-msm8974", "syscon" for MSM8974 - "qcom,tcsr-apq8084", "syscon" for APQ8084 - "qcom,tcsr-msm8916", "syscon" for MSM8916 -- reg: Address range for TCSR registers - -Example: - tcsr: syscon@1a400000 { - compatible = "qcom,tcsr-msm8960", "syscon"; - reg = <0x1a400000 0x100>; - }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml new file mode 100644 index 000000000000..798705ab6a46 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom,tcsr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Top Control and Status Register + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + Qualcomm devices have a set of registers that provide various control and + status functions for their peripherals. + +properties: + compatible: + items: + - enum: + - qcom,msm8976-tcsr + - qcom,msm8998-tcsr + - qcom,qcs404-tcsr + - qcom,sc7180-tcsr + - qcom,sc7280-tcsr + - qcom,sc8280xp-tcsr + - qcom,sdm630-tcsr + - qcom,sdm845-tcsr + - qcom,sdx55-tcsr + - qcom,sdx65-tcsr + - qcom,sm4450-tcsr + - qcom,sm8150-tcsr + - qcom,sm8250-tcsr + - qcom,sm8350-tcsr + - qcom,sm8450-tcsr + - qcom,tcsr-apq8064 + - qcom,tcsr-apq8084 + - qcom,tcsr-ipq5332 + - qcom,tcsr-ipq6018 + - qcom,tcsr-ipq8064 + - qcom,tcsr-ipq8074 + - qcom,tcsr-ipq9574 + - qcom,tcsr-mdm9615 + - qcom,tcsr-msm8226 + - qcom,tcsr-msm8660 + - qcom,tcsr-msm8916 + - qcom,tcsr-msm8953 + - qcom,tcsr-msm8960 + - qcom,tcsr-msm8974 + - qcom,tcsr-msm8996 + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@1a400000 { + compatible = "qcom,tcsr-msm8960", "syscon"; + reg = <0x1a400000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt deleted file mode 100644 index 9e5eba4a4f0d..000000000000 --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt +++ /dev/null @@ -1,99 +0,0 @@ -Qualcomm PM8xxx PMIC multi-function devices - -The PM8xxx family of Power Management ICs are used to provide regulated -voltages and other various functionality to Qualcomm SoCs. - -= PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8058" - "qcom,pm8821" - "qcom,pm8921" - -- #address-cells: - Usage: required - Value type: <u32> - Definition: must be 1 - -- #size-cells: - Usage: required - Value type: <u32> - Definition: must be 0 - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: specifies the interrupt that indicates a subdevice - has generated an interrupt (summary interrupt). The - format of the specifier is defined by the binding document - describing the node's interrupt parent. - -- #interrupt-cells: - Usage: required - Value type : <u32> - Definition: must be 2. Specifies the number of cells needed to encode - an interrupt source. The 1st cell contains the interrupt - number. The 2nd cell is the trigger type and level flags - encoded as follows: - - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - -- interrupt-controller: - Usage: required - Value type: <empty> - Definition: identifies this node as an interrupt controller - -= SUBCOMPONENTS - -The PMIC contains multiple independent functions, each described in a subnode. -The below bindings specify the set of valid subnodes. - -== Real-Time Clock - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8058-rtc" - "qcom,pm8921-rtc" - "qcom,pm8941-rtc" - "qcom,pm8018-rtc" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: single entry specifying the base address of the RTC registers - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: single entry specifying the RTC's alarm interrupt - -- allow-set-time: - Usage: optional - Value type: <empty> - Definition: indicates that the setting of RTC time is allowed by - the host CPU - -= EXAMPLE - - pmicintc: pmic@0 { - compatible = "qcom,pm8921"; - interrupts = <104 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - rtc@11d { - compatible = "qcom,pm8921-rtc"; - reg = <0x11d>; - interrupts = <0x27 0>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml new file mode 100644 index 000000000000..7fe3875a5996 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8xxx PMIC multi-function devices + +maintainers: + - Satya Priya <quic_c_skakit@quicinc.com> + +description: | + The PM8xxx family of Power Management ICs are used to provide regulated + voltages and other various functionality to Qualcomm SoCs. + +properties: + compatible: + oneOf: + - enum: + - qcom,pm8058 + - qcom,pm8821 + - qcom,pm8921 + - items: + - enum: + - qcom,pm8018 + - const: qcom,pm8921 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + +patternProperties: + "gpio@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml# + + "keypad@[0-9a-f]+$": + type: object + $ref: /schemas/input/qcom,pm8921-keypad.yaml# + + "led@[0-9a-f]+$": + type: object + $ref: /schemas/leds/qcom,pm8058-led.yaml# + + "mpps@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml# + + "pwrkey@[0-9a-f]+$": + type: object + $ref: /schemas/input/qcom,pm8921-pwrkey.yaml# + + "rtc@[0-9a-f]+$": + type: object + $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml# + + "vibrator@[0-9a-f]+$": + type: object + $ref: /schemas/input/qcom,pm8xxx-vib.yaml# + + "xoadc@[0-9a-f]+$": + type: object + $ref: /schemas/iio/adc/qcom,pm8018-adc.yaml# + +required: + - compatible + - '#address-cells' + - '#size-cells' + - interrupts + - '#interrupt-cells' + - interrupt-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + ssbi { + #address-cells = <1>; + #size-cells = <0>; + pmic@0 { + compatible = "qcom,pm8921"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <32 IRQ_TYPE_EDGE_RISING>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt deleted file mode 100644 index b823b8625243..000000000000 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ /dev/null @@ -1,283 +0,0 @@ -Qualcomm Resource Power Manager (RPM) - -This driver is used to interface with the Resource Power Manager (RPM) found in -various Qualcomm platforms. The RPM allows each component in the system to vote -for state of the system resources, such as clocks, regulators and bus -frequencies. - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-apq8064" - "qcom,rpm-msm8660" - "qcom,rpm-msm8960" - "qcom,rpm-ipq8064" - "qcom,rpm-mdm9615" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: base address and size of the RPM's message ram - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: three entries specifying the RPM's: - 1. acknowledgement interrupt - 2. error interrupt - 3. wakeup interrupt - -- interrupt-names: - Usage: required - Value type: <string-array> - Definition: must be the three strings "ack", "err" and "wakeup", in order - -- qcom,ipc: - Usage: required - Value type: <prop-encoded-array> - - Definition: three entries specifying the outgoing ipc bit used for - signaling the RPM: - - phandle to a syscon node representing the apcs registers - - u32 representing offset to the register within the syscon - - u32 representing the ipc bit within the register - - -= SUBNODES - -The RPM exposes resources to its subnodes. The below bindings specify the set -of valid subnodes that can operate on these resources. - -== Regulators - -Regulator nodes are identified by their compatible: - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-pm8058-regulators" - "qcom,rpm-pm8901-regulators" - "qcom,rpm-pm8921-regulators" - "qcom,rpm-pm8018-regulators" - "qcom,rpm-smb208-regulators" - -- vdd_l0_l1_lvs-supply: -- vdd_l2_l11_l12-supply: -- vdd_l3_l4_l5-supply: -- vdd_l6_l7-supply: -- vdd_l8-supply: -- vdd_l9-supply: -- vdd_l10-supply: -- vdd_l13_l16-supply: -- vdd_l14_l15-supply: -- vdd_l17_l18-supply: -- vdd_l19_l20-supply: -- vdd_l21-supply: -- vdd_l22-supply: -- vdd_l23_l24_l25-supply: -- vdd_ncp-supply: -- vdd_s0-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: - Usage: optional (pm8058 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- lvs0_in-supply: -- lvs1_in-supply: -- lvs2_in-supply: -- lvs3_in-supply: -- mvs_in-supply: -- vdd_l0-supply: -- vdd_l1-supply: -- vdd_l2-supply: -- vdd_l3-supply: -- vdd_l4-supply: -- vdd_l5-supply: -- vdd_l6-supply: -- vdd_s0-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: - Usage: optional (pm8901 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_l1_l2_l12_l18-supply: -- vdd_l3_l15_l17-supply: -- vdd_l4_l14-supply: -- vdd_l5_l8_l16-supply: -- vdd_l6_l7-supply: -- vdd_l9_l11-supply: -- vdd_l10_l22-supply: -- vdd_l21_l23_l29-supply: -- vdd_l24-supply: -- vdd_l25-supply: -- vdd_l26-supply: -- vdd_l27-supply: -- vdd_l28-supply: -- vdd_ncp-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: -- vin_5vs-supply: -- vin_lvs1_3_6-supply: -- vin_lvs2-supply: -- vin_lvs4_5_7-supply: - Usage: optional (pm8921 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vin_lvs1-supply: -- vdd_l7-supply: -- vdd_l8-supply: -- vdd_l9_l10_l11_l12-supply: - Usage: optional (pm8018 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -The regulator node houses sub-nodes for each regulator within the device. Each -sub-node is identified using the node's name, with valid values listed for each -of the pmics below. - -pm8058: - l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, - l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4, - lvs0, lvs1, ncp - -pm8901: - l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3, - mvs - -pm8921: - s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, - l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28, - l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch, - ncp - -pm8018: - s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, - l12, l14, lvs1 - -smb208: - s1a, s1b, s2a, s2b - -The content of each sub-node is defined by the standard binding for regulators - -see regulator.txt - with additional custom properties described below: - -=== Switch-mode Power Supply regulator custom properties - -- bias-pull-down: - Usage: optional - Value type: <empty> - Definition: enable pull down of the regulator when inactive - -- qcom,switch-mode-frequency: - Usage: required - Value type: <u32> - Definition: Frequency (Hz) of the switch-mode power supply; - must be one of: - 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, - 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, - 1480000, 1370000, 1280000, 1200000 - -- qcom,force-mode: - Usage: optional (default if no other qcom,force-mode is specified) - Value type: <u32> - Definition: indicates that the regulator should be forced to a - particular mode, valid values are: - QCOM_RPM_FORCE_MODE_NONE - do not force any mode - QCOM_RPM_FORCE_MODE_LPM - force into low power mode - QCOM_RPM_FORCE_MODE_HPM - force into high power mode - QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically - select its own mode based on - realtime current draw, only for: - pm8921 smps and ftsmps - -- qcom,power-mode-hysteretic: - Usage: optional - Value type: <empty> - Definition: select that the power supply should operate in hysteretic - mode, instead of the default pwm mode - -=== Low-dropout regulator custom properties - -- bias-pull-down: - Usage: optional - Value type: <empty> - Definition: enable pull down of the regulator when inactive - -- qcom,force-mode: - Usage: optional - Value type: <u32> - Definition: indicates that the regulator should not be forced to any - particular mode, valid values are: - QCOM_RPM_FORCE_MODE_NONE - do not force any mode - QCOM_RPM_FORCE_MODE_LPM - force into low power mode - QCOM_RPM_FORCE_MODE_HPM - force into high power mode - QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass - mode, i.e. to act as a switch - and not regulate, only for: - pm8921 pldo, nldo and nldo1200 - -=== Negative Charge Pump custom properties - -- qcom,switch-mode-frequency: - Usage: required - Value type: <u32> - Definition: Frequency (Hz) of the switch mode power supply; - must be one of: - 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, - 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, - 1480000, 1370000, 1280000, 1200000 - -= EXAMPLE - - #include <dt-bindings/mfd/qcom-rpm.h> - - rpm@108000 { - compatible = "qcom,rpm-msm8960"; - reg = <0x108000 0x1000>; - qcom,ipc = <&apcs 0x8 2>; - - interrupts = <0 19 0>, <0 21 0>, <0 22 0>; - interrupt-names = "ack", "err", "wakeup"; - - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - - s1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - bias-pull-down; - - qcom,switch-mode-frequency = <3200000>; - }; - - pm8921_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - - qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml new file mode 100644 index 000000000000..4762eb1439ce --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt4831.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 DSV and Backlight Integrated IC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + RT4831 is a multifunctional device that can provide power to the LCD display + and LCD backlight. + + For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V. + It's sufficient to meet the current LCD power requirement. + + For the LCD backlight, it can provide four channel WLED driving capability. + Each channel driving current is up to 30mA + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +properties: + compatible: + const: richtek,rt4831 + + reg: + description: I2C device address. + maxItems: 1 + + enable-gpios: + description: | + GPIO to enable/disable the chip. It is optional. + Some usage directly tied this pin to follow VIO 1.8V power on sequence. + maxItems: 1 + + regulators: + $ref: ../regulator/richtek,rt4831-regulator.yaml + + backlight: + $ref: ../leds/backlight/richtek,rt4831-backlight.yaml + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/rt4831-backlight.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt4831@11 { + compatible = "richtek,rt4831"; + reg = <0x11>; + + regulators { + DSVLCM { + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + regulator-allow-bypass; + }; + DSVP { + regulator-name = "rt4831-dsvp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + regulator-boot-on; + }; + DSVN { + regulator-name = "rt4831-dsvn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + regulator-boot-on; + }; + }; + + backlight { + compatible = "richtek,rt4831-backlight"; + default-brightness = <1024>; + max-brightness = <2048>; + richtek,bled-ovp-sel = /bits/ 8 <RT4831_BLOVPLVL_21V>; + richtek,channel-use = /bits/ 8 <RT4831_BLED_ALLCHEN>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml new file mode 100644 index 000000000000..386b1a50158a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt5033.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5033 Power Management Integrated Circuit + +maintainers: + - Jakob Hauser <jahau@rocketmail.com> + +description: + RT5033 is a multifunction device which includes battery charger, fuel gauge, + flash LED current source, LDO and synchronous Buck converter for portable + applications. It is interfaced to host controller using I2C interface. The + battery fuel gauge uses a separate I2C bus. + +properties: + compatible: + const: richtek,rt5033 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + description: + The regulators of RT5033 have to be instantiated under a sub-node named + "regulators". For SAFE_LDO voltage there is only one value of 4.9 V. LDO + voltage ranges from 1.2 V to 3.0 V in 0.1 V steps. BUCK voltage ranges + from 1.0 V to 3.0 V in 0.1 V steps. + type: object + patternProperties: + "^(SAFE_LDO|LDO|BUCK)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + additionalProperties: false + + charger: + type: object + $ref: /schemas/power/supply/richtek,rt5033-charger.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + constant-charge-current-max-microamp = <1000000>; + charge-term-current-microamp = <150000>; + precharge-upper-limit-microvolt = <3500000>; + constant-charge-voltage-max-microvolt = <4350000>; + }; + + extcon { + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + fuel-gauge@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + + power-supplies = <&rt5033_charger>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupt-parent = <&msmgpio>; + interrupts = <62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_default>; + + regulators { + safe_ldo_reg: SAFE_LDO { + regulator-name = "SAFE_LDO"; + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + ldo_reg: LDO { + regulator-name = "LDO"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + buck_reg: BUCK { + regulator-name = "BUCK"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + + rt5033_charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml new file mode 100644 index 000000000000..f73b8b25d7d5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt5120.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5120 PMIC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT5120 provides four high-efficiency buck converters and one LDO voltage + regulator. The device is targeted at providingthe processor voltage, memory, + I/O, and peripheral rails in home entertainment devices. The I2C interface is + used for dynamic voltage scaling of the processor voltage, power rails on/off + sequence control, operation mode selection. + +properties: + compatible: + enum: + - richtek,rt5120 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + wakeup-source: true + + richtek,enable-undervolt-hiccup: + type: boolean + description: | + If used, under voltage protection trigger hiccup behavior, else latchup as + default + + richtek,enable-overvolt-hiccup: + type: boolean + description: + Like as 'enable-uv-hiccup', it configures over voltage protection to + hiccup, else latchup as default + + vin1-supply: + description: phandle for buck1 input power source + + vin2-supply: + description: phandle for buck2 input power source + + vin3-supply: + description: phandle for buck3 input power source + + vin4-supply: + description: phandle for buck4 input power source + + vinldo-supply: + description: phandle for ldo input power source + + regulators: + type: object + + patternProperties: + "^buck[1-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + regulator-allowed-modes: + description: | + Used to specify the allowed buck converter operating mode + mode mapping: + 0: auto mode + 1: force pwm mode + items: + enum: [0, 1] + + "^(ldo|exten)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + additionalProperties: false + + powerkey: + type: object + description: + PON key that connected to RT5120 PMIC. + + properties: + compatible: + enum: + - richtek,rt5120-pwrkey + + required: + - compatible + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - '#interrupt-cells' + - interrupt-controller + - regulators + - powerkey + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@62 { + compatible = "richtek,rt5120"; + reg = <0x62>; + interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + wakeup-source; + + regulators { + buck1 { + regulator-name = "rt5120-buck1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-allowed-modes = <0 1>; + regulator-boot-on; + }; + buck2 { + regulator-name = "rt5120-buck2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + buck3 { + regulator-name = "rt5120-buck3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + buck4 { + regulator-name = "rt5120-buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + ldo { + regulator-name = "rt5120-ldo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + exten { + regulator-name = "rt5120-exten"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + powerkey { + compatible = "richtek,rt5120-pwrkey"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml new file mode 100644 index 000000000000..032a7fb0b4a7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ricoh,rn5t618.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ricoh RN5T567/RN5T618/RC5T619 PMIC + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: | + Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which + integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators, + GPIOs, and a watchdog timer. It can be controlled through an I2C interface. + The RN5T618/RC5T619 provides additionally a Li-ion battery charger, + fuel gauge, and an ADC. + The RC5T619 additionally includes USB charger detection and an RTC. + +allOf: + - if: + properties: + compatible: + contains: + const: ricoh,rn5t567 + then: + properties: + regulators: + patternProperties: + "^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$": + $ref: ../regulator/regulator.yaml + additionalProperties: false + - if: + properties: + compatible: + contains: + const: ricoh,rn5t618 + then: + properties: + regulators: + patternProperties: + "^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$": + $ref: ../regulator/regulator.yaml + additionalProperties: false + - if: + properties: + compatible: + contains: + const: ricoh,rc5t619 + then: + properties: + regulators: + patternProperties: + "^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$": + $ref: ../regulator/regulator.yaml + additionalProperties: false + +properties: + compatible: + enum: + - ricoh,rn5t567 + - ricoh,rn5t618 + - ricoh,rc5t619 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + system-power-controller: + type: boolean + description: | + See Documentation/devicetree/bindings/power/power-controller.txt + + regulators: + type: object + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@32 { + compatible = "ricoh,rn5t618"; + reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + system-power-controller; + + regulators { + DCDC1 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + DCDC2 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt deleted file mode 100644 index 04df07f6f793..000000000000 --- a/Documentation/devicetree/bindings/mfd/rk808.txt +++ /dev/null @@ -1,277 +0,0 @@ -RK8XX Power Management Integrated Circuit - -The rk8xx family current members: -rk805 -rk808 -rk809 -rk817 -rk818 - -Required properties: -- compatible: "rockchip,rk805" -- compatible: "rockchip,rk808" -- compatible: "rockchip,rk809" -- compatible: "rockchip,rk817" -- compatible: "rockchip,rk818" -- reg: I2C slave address -- interrupts: the interrupt outputs of the controller. -- #clock-cells: from common clock binding; shall be set to 1 (multiple clock - outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. - -Optional properties: -- clock-output-names: From common clock binding to override the - default output clock name -- rockchip,system-power-controller: Telling whether or not this pmic is controlling - the system power. - -Optional RK805 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc5-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc6-supply: The input supply for LDO_REG3 - -Optional RK808 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc7-supply: The input supply for LDO_REG3 and LDO_REG7 -- vcc8-supply: The input supply for SWITCH_REG1 -- vcc9-supply: The input supply for LDO_REG4 and LDO_REG5 -- vcc10-supply: The input supply for LDO_REG6 -- vcc11-supply: The input supply for LDO_REG8 -- vcc12-supply: The input supply for SWITCH_REG2 -- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers - for 2 host gpio's used for dvs. The format of the gpio specifier depends in - the gpio controller. If DVS GPIOs aren't present, voltage changes will happen - very quickly with no slow ramp time. - -Optional shared RK809 and RK817 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc5-supply: The input supply for LDO_REG1, LDO_REG2, LDO_REG3 -- vcc6-supply: The input supply for LDO_REG4, LDO_REG5, LDO_REG6 -- vcc7-supply: The input supply for LDO_REG7, LDO_REG8, LDO_REG9 - -Optional RK809 properties: -- vcc8-supply: The input supply for SWITCH_REG1 -- vcc9-supply: The input supply for DCDC_REG5, SWITCH_REG2 - -Optional RK817 properties: -- vcc8-supply: The input supply for BOOST -- vcc9-supply: The input supply for OTG_SWITCH - -Optional RK818 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- boost-supply: The input supply for DCDC_BOOST -- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7 -- vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8 -- vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG -- h_5v-supply: The input supply for HDMI_SWITCH -- usb-supply: The input supply for OTG_SWITCH - -Regulators: All the regulators of RK8XX to be instantiated shall be -listed in a child node named 'regulators'. Each regulator is represented -by a child node of the 'regulators' node. - - regulator-name { - /* standard regulator bindings here */ - }; - -Following regulators of the RK805 PMIC regulators are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK805 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 3 - -Following regulators of the RK808 PMIC block are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK808 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 8. - - SWITCH_REGn - - valid values for n are 1 to 2 - -Following regulators of the RK809 and RK817 PMIC blocks are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK809 and RK817 datasheets. - - - DCDC_REGn - - valid values for n are 1 to 5 for RK809. - - valid values for n are 1 to 4 for RK817. - - LDO_REGn - - valid values for n are 1 to 9 for RK809. - - valid values for n are 1 to 9 for RK817. - - SWITCH_REGn - - valid values for n are 1 to 2 for RK809. - - BOOST for RK817 - - OTG_SWITCH for RK817 - -Following regulators of the RK818 PMIC block are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK818 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 9. - - SWITCH_REG - - HDMI_SWITCH - - OTG_SWITCH - -It is necessary to configure three pins for both the RK809 and RK817, the three -pins are "gpio_ts" "gpio_gt" "gpio_slp". - The gpio_gt and gpio_ts pins support the gpio function. - The gpio_slp pin is for controlling the pmic states, as below: - - reset - - power down - - sleep - -Standard regulator bindings are used inside regulator subnodes. Check - Documentation/devicetree/bindings/regulator/regulator.txt -for more details - -Example: - rk808: pmic@1b { - compatible = "rockchip,rk808"; - clock-output-names = "xin32k", "rk808-clkout2"; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; - reg = <0x1b>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - - vcc8-supply = <&vcc_18>; - vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc_io>; - vcc12-supply = <&vcc_io>; - vddio-supply = <&vccio_pmu>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1300000>; - regulator-name = "vdd_arm"; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - }; - - vcc_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; - }; - - vccio_pmu: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_pmu"; - }; - - vcc_tp: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_tp"; - }; - - vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; - }; - - vcc18_lcd: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - }; - - vdd10_lcd: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; - }; - - vcc_18: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; - }; - - vcca_codec: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcca_codec"; - }; - - vcc_wl: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_wl"; - }; - - vcc_lcd: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_lcd"; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt deleted file mode 100644 index 16778ea00dbc..000000000000 --- a/Documentation/devicetree/bindings/mfd/rn5t618.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Ricoh RN5T567/RN5T618 PMIC - -Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which -integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators, -GPIOs, and a watchdog timer. It can be controlled through an I2C interface. -The RN5T618/RC5T619 provides additionally a Li-ion battery charger, -fuel gauge, and an ADC. -The RC5T619 additionnally includes USB charger detection and an RTC. - -Required properties: - - compatible: must be one of - "ricoh,rn5t567" - "ricoh,rn5t618" - "ricoh,rc5t619" - - reg: the I2C slave address of the device - -Optional properties: - - interrupts: interrupt mapping for IRQ - See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - system-power-controller: - See Documentation/devicetree/bindings/power/power-controller.txt - -Sub-nodes: - - regulators: the node is required if the regulator functionality is - needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4 - (RN5T567/RC5T619), LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, LDO8, - LDO9, LDO10, LDORTC1 and LDORTC2. - LDO7-10 are specific to RC5T619. - The common bindings for each individual regulator can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - -Example: - - pmic@32 { - compatible = "ricoh,rn5t618"; - reg = <0x32>; - interrupt-parent = <&gpio5>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; - system-power-controller; - - regulators { - DCDC1 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - DCDC2 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml new file mode 100644 index 000000000000..44f8188360dd --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK805 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD + that includes multiple switchable regulators. + +properties: + compatible: + enum: + - rockchip,rk805 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + gpio-controller: true + + '#gpio-cells': + const: 2 + + rockchip,system-power-controller: + type: boolean + deprecated: true + description: + Telling whether or not this PMIC is controlling the system power. + + system-power-controller: true + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc6-supply: + description: + The input supply for LDO_REG3. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-3])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + unevaluatedProperties: false + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <0>; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_18: LDO_REG1 { + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_11: LDO_REG3 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml new file mode 100644 index 000000000000..3c2b06629b75 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml @@ -0,0 +1,408 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK806 Power Management Integrated Circuit + +maintainers: + - Sebastian Reichel <sebastian.reichel@collabora.com> + +description: + Rockchip RK806 series PMIC. This device consists of an spi or + i2c controlled MFD that includes multiple switchable regulators. + +properties: + compatible: + enum: + - rockchip,rk806 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + system-power-controller: true + + vcc1-supply: + description: + The input supply for dcdc-reg1. + + vcc2-supply: + description: + The input supply for dcdc-reg2. + + vcc3-supply: + description: + The input supply for dcdc-reg3. + + vcc4-supply: + description: + The input supply for dcdc-reg4. + + vcc5-supply: + description: + The input supply for dcdc-reg5. + + vcc6-supply: + description: + The input supply for dcdc-reg6. + + vcc7-supply: + description: + The input supply for dcdc-reg7. + + vcc8-supply: + description: + The input supply for dcdc-reg8. + + vcc9-supply: + description: + The input supply for dcdc-reg9. + + vcc10-supply: + description: + The input supply for dcdc-reg10. + + vcc11-supply: + description: + The input supply for pldo-reg1, pldo-reg2 and pldo-reg3. + + vcc12-supply: + description: + The input supply for pldo-reg4 and pldo-reg5. + + vcc13-supply: + description: + The input supply for nldo-reg1, nldo-reg2 and nldo-reg3. + + vcc14-supply: + description: + The input supply for nldo-reg4 and nldo-reg5. + + vcca-supply: + description: + The input supply for pldo-reg6. + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +patternProperties: + '-pins$': + type: object + additionalProperties: false + $ref: /schemas/pinctrl/pinmux-node.yaml + + properties: + function: + enum: [pin_fun0, pin_fun1, pin_fun2, pin_fun3, pin_fun4, pin_fun5] + + pins: + $ref: /schemas/types.yaml#/definitions/string + enum: [gpio_pwrctrl1, gpio_pwrctrl2, gpio_pwrctrl3] + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc5v0_sys>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu_mem_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vdd_vdenc_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd1_1v8_ddr_s3: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd1_1v8_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s3: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + master_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "master_pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd2l_0v9_ddr_s3: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd2l_0v9_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + master_nldo3: nldo-reg3 { + regulator-name = "master_nldo3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v75_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml new file mode 100644 index 000000000000..d2ac6fbd5ce6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml @@ -0,0 +1,261 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK808 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and a power button. + +properties: + compatible: + enum: + - rockchip,rk808 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + maxItems: 2 + + rockchip,system-power-controller: + type: boolean + deprecated: true + description: + Telling whether or not this PMIC is controlling the system power. + + system-power-controller: true + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc6-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc7-supply: + description: + The input supply for LDO_REG3 and LDO_REG7. + + vcc8-supply: + description: + The input supply for SWITCH_REG1. + + vcc9-supply: + description: + The input supply for LDO_REG4 and LDO_REG5. + + vcc10-supply: + description: + The input supply for LDO_REG6. + + vcc11-supply: + description: + The input supply for LDO_REG8. + + vcc12-supply: + description: + The input supply for SWITCH_REG2. + + vddio-supply: + description: + The input supply for digital IO. + + dvs-gpios: + description: | + buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for + 2 host gpio's used for dvs. The format of the gpio specifier + depends in the gpio controller. If DVS GPIOs aren't present, + voltage changes will happen very quickly with no slow ramp time. + maxItems: 2 + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + reg = <0x1b>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vccio_pmu>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd_arm"; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vccio_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + }; + + vcc_tp: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml new file mode 100644 index 000000000000..839c0521f1e5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml @@ -0,0 +1,288 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK809 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and power button. + +properties: + compatible: + enum: + - rockchip,rk809 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: | + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + deprecated: true + description: + Telling whether or not this PMIC is controlling the system power. + + system-power-controller: true + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. + + vcc6-supply: + description: + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. + + vcc7-supply: + description: + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. + + vcc8-supply: + description: + The input supply for SWITCH_REG1. + + vcc9-supply: + description: + The input supply for DCDC_REG5 and SWITCH_REG2. + + regulators: + type: object + patternProperties: + "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + unevaluatedProperties: false + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l_pin>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sysin>; + vcc2-supply = <&vcc_sysin>; + vcc3-supply = <&vcc_sysin>; + vcc4-supply = <&vcc_sysin>; + vcc6-supply = <&vcc_sysin>; + vcc7-supply = <&vcc_sysin>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sysin>; + vcc10-supply = <&vcc_sysin>; + vcc11-supply = <&vcc_sysin>; + vcc12-supply = <&vcc3v3_sys>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: vcc_wl: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-name = "vcc1v8_pmupll"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml new file mode 100644 index 000000000000..92b1592e8942 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml @@ -0,0 +1,387 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK817 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, a power button, an audio codec, and a + battery charger manager. + +properties: + compatible: + enum: + - rockchip,rk817 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + deprecated: true + description: + Telling whether or not this PMIC is controlling the system power. + + system-power-controller: true + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. + + vcc6-supply: + description: + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. + + vcc7-supply: + description: + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. + + vcc8-supply: + description: + The input supply for BOOST. + + vcc9-supply: + description: + The input supply for OTG_SWITCH. + + regulators: + type: object + patternProperties: + "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": + type: object + unevaluatedProperties: false + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + clocks: + description: + The input clock for the audio codec. + + clock-names: + description: + The clock name for the codec clock. + items: + - const: mclk + + '#sound-dai-cells': + description: + Needed for the interpretation of sound dais. + const: 0 + + codec: + description: | + The child node for the codec to hold additional properties. If no + additional properties are required for the codec, this node can be + omitted. + type: object + additionalProperties: false + properties: + rockchip,mic-in-differential: + type: boolean + description: + Describes if the microphone uses differential mode. + + charger: + description: | + The child node for the charger to hold additional properties. If a + battery is not in use, this node can be omitted. + type: object + $ref: /schemas/power/supply/power-supply.yaml + + properties: + monitored-battery: + description: | + A phandle to a monitored battery node that contains a valid + value for: + charge-full-design-microamp-hours, + charge-term-current-microamp, + constant-charge-current-max-microamp, + constant-charge-voltage-max-microvolt, + voltage-max-design-microvolt, + voltage-min-design-microvolt, + and a valid ocv-capacity table. + + rockchip,resistor-sense-micro-ohms: + description: | + Value in microohms of the battery sense resistor. This value is + used by the driver to set the correct divisor value to translate + ADC readings into the proper units of measure. + enum: [10000, 20000] + + rockchip,sleep-enter-current-microamp: + description: | + Value in microamps of the sleep enter current for the charger. + Value is used by the driver to calibrate the relax threshold. + + rockchip,sleep-filter-current-microamp: + description: + Value in microamps of the sleep filter current for the charger. + Value is used by the driver to derive the sleep sample current. + + required: + - monitored-battery + - rockchip,resistor-sense-micro-ohms + - rockchip,sleep-enter-current-microamp + - rockchip,sleep-filter-current-microamp + + additionalProperties: false + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "xin32k"; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S1_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; + wakeup-source; + #clock-cells = <1>; + #sound-dai-cells = <0>; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vccsys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v3_pmu: LDO_REG4 { + regulator-name = "vcc3v3_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-name = "vcc_bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-name = "vcc_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_cam: LDO_REG9 { + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + + rk817_codec: codec { + rockchip,mic-in-differential; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml new file mode 100644 index 000000000000..fd4b9de364aa --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml @@ -0,0 +1,286 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk818.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK818 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and a power button. + +properties: + compatible: + enum: + - rockchip,rk818 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: | + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + maxItems: 2 + + rockchip,system-power-controller: + type: boolean + deprecated: true + description: + Telling whether or not this PMIC is controlling the system power. + + system-power-controller: true + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + boost-supply: + description: + The input supply for DCDC_BOOST + + vcc6-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc7-supply: + description: + The input supply for LDO_REG3, LDO_REG5, and LDO_REG7. + + vcc8-supply: + description: + The input supply for LDO_REG4, LDO_REG6, and LDO_REG8. + + vcc9-supply: + description: + The input supply for LDO_REG9 and SWITCH_REG. + + vddio-supply: + description: + The input supply for digital IO. + + h_5v-supply: + description: + The input supply for HDMI_SWITCH. + + usb-supply: + description: + The input supply for OTG_SWITCH. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk818: pmic@1c { + compatible = "rockchip,rk818"; + reg = <0x1c>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vdd_sys>; + vcc2-supply = <&vdd_sys>; + vcc3-supply = <&vdd_sys>; + vcc4-supply = <&vdd_sys>; + boost-supply = <&vdd_in_otg_out>; + vcc6-supply = <&vdd_sys>; + vcc7-supply = <&vdd_misc_1v8>; + vcc8-supply = <&vdd_misc_1v8>; + vcc9-supply = <&vdd_3v3_io>; + vddio-supply = <&vdd_3v3_io>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_3v3_io: DCDC_REG4 { + regulator-name = "vdd_3v3_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_sys: DCDC_BOOST { + regulator-name = "vdd_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <5000000>; + }; + }; + + vdd_sd: SWITCH_REG { + regulator-name = "vdd_sd"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_eth_2v5: LDO_REG2 { + regulator-name = "vdd_eth_2v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2500000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_1v8_lcd_ldo: LDO_REG4 { + regulator-name = "vdd_1v8_lcd_ldo"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0_lcd: LDO_REG6 { + regulator-name = "vdd_1v0_lcd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_1v8_ldo: LDO_REG7 { + regulator-name = "vdd_1v8_ldo"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_io_sd: LDO_REG9 { + regulator-name = "vdd_io_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt deleted file mode 100644 index c3c02ce73cde..000000000000 --- a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt +++ /dev/null @@ -1,102 +0,0 @@ -* ROHM BD70528 Power Management Integrated Circuit bindings - -BD70528MWV is an ultra-low quiescent current general purpose, single-chip, -power management IC for battery-powered portable devices. The IC -integrates 3 ultra-low current consumption buck converters, 3 LDOs and 2 -LED Drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz -clock gate, high-accuracy VREF for use with an external ADC, flexible -dual-input power path, 10 bit SAR ADC for battery temperature monitor and -1S battery charger with scalable charge currents. - -Required properties: - - compatible : Should be "rohm,bd70528" - - reg : I2C slave address. - - interrupts : The interrupt line the device is connected to. - - interrupt-controller : To indicate BD70528 acts as an interrupt controller. - - #interrupt-cells : Should be 2. Usage is compliant to the 2 cells - variant of ../interrupt-controller/interrupts.txt - - gpio-controller : To indicate BD70528 acts as a GPIO controller. - - #gpio-cells : Should be 2. The first cell is the pin number and - the second cell is used to specify flags. See - ../gpio/gpio.txt for more information. - - #clock-cells : Should be 0. - - regulators: : List of child nodes that specify the regulators. - Please see ../regulator/rohm,bd70528-regulator.txt - -Optional properties: - - clock-output-names : Should contain name for output clock. - -Example: -/* External oscillator */ -osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <1>; - clock-frequency = <32768>; - clock-output-names = "osc"; -}; - -pmic: pmic@4b { - compatible = "rohm,bd70528"; - reg = <0x4b>; - interrupt-parent = <&gpio1>; - interrupts = <29 GPIO_ACTIVE_LOW>; - clocks = <&osc 0>; - #clock-cells = <0>; - clock-output-names = "bd70528-32k-out"; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - - regulators { - buck1: BUCK1 { - regulator-name = "buck1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3400000>; - regulator-boot-on; - regulator-ramp-delay = <125>; - }; - buck2: BUCK2 { - regulator-name = "buck2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-ramp-delay = <125>; - }; - buck3: BUCK3 { - regulator-name = "buck3"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-ramp-delay = <250>; - }; - ldo1: LDO1 { - regulator-name = "ldo1"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - ldo2: LDO2 { - regulator-name = "ldo2"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - ldo3: LDO3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <3300000>; - }; - led_ldo1: LED_LDO1 { - regulator-name = "led_ldo1"; - regulator-min-microvolt = <200000>; - regulator-max-microvolt = <300000>; - }; - led_ldo2: LED_LDO2 { - regulator-name = "led_ldo2"; - regulator-min-microvolt = <200000>; - regulator-max-microvolt = <300000>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml new file mode 100644 index 000000000000..05747e012516 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml @@ -0,0 +1,201 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71815 Power Management Integrated Circuit + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + BD71815AGW is a single-chip power management ICs for battery-powered + portable devices. It integrates 5 buck converters, 8 LDOs, a boost driver + for LED and a 500 mA single-cell linear charger. Also included is a Coulomb + counter, a real-time clock (RTC), and a 32.768 kHz clock gate and two GPOs. + +properties: + compatible: + const: rohm,bd71815 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the pin number and the second cell is used to specify + flags. See ../gpio/gpio.txt for more information. + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + + clock-output-names: + const: bd71815-32k-out + + rohm,clkout-open-drain: + description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + + rohm,charger-sense-resistor-ohms: + minimum: 10000000 + maximum: 50000000 + description: | + BD71827 and BD71828 have SAR ADC for measuring charging currents. + External sense resistor (RSENSE in data sheet) should be used. If + something other but 30MOhm resistor is used the resistance value + should be given here in Ohms. + default: 30000000 + + regulators: + $ref: ../regulator/rohm,bd71815-regulator.yaml + description: + List of child nodes that specify the regulators. + + gpio-reserved-ranges: + description: | + Usage of BD71828 GPIO pins can be changed via OTP. This property can be + used to mark the pins which should not be configured for GPIO. Please see + the ../gpio/gpio.txt for more information. + + rohm,enable-hidden-gpo: + description: | + The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the + data-sheet as its location in the middle of GND pins makes it hard to + use on PCB. If your board has managed to use this pin you can enable the + second GPO by defining this property. Dont enable this if you are unsure + about how the E5 pin is connected on your board. + type: boolean + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { + compatible = "rohm,bd71815"; + reg = <0x4b>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&osc 0>; + #clock-cells = <0>; + clock-output-names = "bd71815-32k-out"; + + gpio-controller; + #gpio-cells = <2>; + + rohm,charger-sense-resistor-ohms = <10000000>; + + regulators { + buck1: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1150000>; + rohm,dvs-suspend-voltage = <950000>; + }; + buck2: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1150000>; + rohm,dvs-suspend-voltage = <950000>; + }; + buck3: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + buck4: buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-always-on; + }; + buck5: buck5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo1: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo2: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo3: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo4: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo5: ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo6: ldodvref { + regulator-name = "ldodvref"; + regulator-always-on; + }; + ldo7: ldolpsr { + regulator-name = "ldolpsr"; + regulator-always-on; + }; + + boost: wled { + regulator-name = "wled"; + regulator-min-microamp = <10>; + regulator-max-microamp = <25000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml index 3a6a1a26e2b3..11089aa89ec6 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM BD71828 Power Management Integrated Circuit bindings +title: ROHM BD71828 Power Management Integrated Circuit maintainers: - - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + - Matti Vaittinen <mazziesaccount@gmail.com> description: | BD71828GW is a single-chip power management IC for battery-powered portable @@ -44,6 +44,12 @@ properties: clock-output-names: const: bd71828-32k-out + rohm,clkout-open-drain: + description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + rohm,charger-sense-resistor-ohms: minimum: 10000000 maximum: 50000000 diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml index 65018a019e1d..7aa343f58cb6 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM BD71837 Power Management Integrated Circuit bindings +title: ROHM BD71837 Power Management Integrated Circuit maintainers: - - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + - Matti Vaittinen <mazziesaccount@gmail.com> description: | BD71837MWV is programmable Power Management ICs for powering single-core, @@ -32,9 +32,15 @@ properties: clocks: maxItems: 1 + clock-names: + const: osc + "#clock-cells": const: 0 + clock-output-names: + const: pmic_clk + # The BD718x7 supports two different HW states as reset target states. States # are called as SNVS and READY. At READY state all the PMIC power outputs go # down and OTP is reload. At the SNVS state all other logic and external diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml index 77bcca2d414f..d783cc4e4e86 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/mfd/rohm,bd71847-pmic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM BD71847 and BD71850 Power Management Integrated Circuit bindings +title: ROHM BD71847 and BD71850 Power Management Integrated Circuit maintainers: - - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + - Matti Vaittinen <mazziesaccount@gmail.com> description: | BD71847AMWV and BD71850MWV are programmable Power Management ICs for powering @@ -38,6 +38,9 @@ properties: "#clock-cells": const: 0 + clock-output-names: + maxItems: 1 + # The BD71847 abd BD71850 support two different HW states as reset target # states. States are called as SNVS and READY. At READY state all the PMIC # power outputs go down and OTP is reload. At the SNVS state all other logic @@ -116,16 +119,17 @@ required: - compatible - reg - interrupts - - clocks - - "#clock-cells" - regulators additionalProperties: false +dependencies: + '#clock-cells': [clocks] + clocks: ['#clock-cells'] + examples: - | #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/leds/common.h> i2c { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml new file mode 100644 index 000000000000..89f9efee465b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd9571mwv.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC) + +maintainers: + - Marek Vasut <marek.vasut@gmail.com> + +properties: + compatible: + enum: + - rohm,bd9571mwv + - rohm,bd9574mwf + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + rohm,ddr-backup-power: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0xf + description: | + Value to use for DDR-Backup Power (default 0). + This is a bitmask that specifies which DDR power rails need to be kept + powered when backup mode is entered, for system suspend: + - bit 0: DDR0 + - bit 1: DDR1 + - bit 2: DDR0C + - bit 3: DDR1C + These bits match the KEEPON_DDR* bits in the documentation for the "BKUP + Mode Cnt" register. + + rohm,rstbmode-level: + $ref: /schemas/types.yaml#/definitions/flag + description: + The RSTB signal is configured for level mode, to accommodate a toggle + power switch (the RSTBMODE pin is strapped low). + + rohm,rstbmode-pulse: + $ref: /schemas/types.yaml#/definitions/flag + description: + The RSTB signal is configured for pulse mode, to accommodate a momentary + power switch (the RSTBMODE pin is strapped high). + + regulators: + type: object + description: + List of child nodes that specify the regulator initialization data. + Child nodes must be named after their hardware counterparts. + + patternProperties: + "^(vd09|vd18|vd25|vd33|dvfs)$": + type: object + $ref: ../regulator/regulator.yaml# + + properties: + regulator-name: + pattern: "^(vd09|vd18|vd25|vd33|dvfs)$" + + unevaluatedProperties: false + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + +oneOf: + - required: + - rohm,rstbmode-level + - required: + - rohm,rstbmode-pulse + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic: pmic@30 { + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + rohm,ddr-backup-power = <0xf>; + rohm,rstbmode-pulse; + + regulators { + dvfs: dvfs { + regulator-name = "dvfs"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml new file mode 100644 index 000000000000..b7b323b1a4f2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd9576-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + BD9576MUF and BD9573MUF are power management ICs primarily intended for + powering the R-Car series processors. + The IC provides 6 power outputs with configurable sequencing and safety + monitoring. A watchdog logic with slow ping/windowed modes is also included. + +properties: + compatible: + enum: + - rohm,bd9576 + - rohm,bd9573 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + rohm,vout1-en-low: + description: + BD9576 and BD9573 VOUT1 regulator enable state can be individually + controlled by a GPIO. This is dictated by state of vout1-en pin during + the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1 + enable state is controlled via this pin. Set this property if vout1-en + is wired to be down at PMIC start-up. + type: boolean + + rohm,vout1-en-gpios: + description: + GPIO specifier to specify the GPIO connected to vout1-en for vout1 ON/OFF + state control. + maxItems: 1 + + rohm,ddr-sel-low: + description: + The BD9576 and BD9573 output voltage for DDR can be selected by setting + the ddr-sel pin low or high. Set this property if ddr-sel is grounded. + type: boolean + + rohm,watchdog-enable-gpios: + description: The GPIO line used to enable the watchdog. + maxItems: 1 + + rohm,watchdog-ping-gpios: + description: The GPIO line used to ping the watchdog. + maxItems: 1 + + rohm,hw-timeout-ms: + maxItems: 2 + description: + Watchdog timeout in milliseconds. If single value is given it is + the maximum timeout. Eg. if pinging watchdog is not done within this time + limit the watchdog will be triggered. If two values are given watchdog + is configured in "window mode". Then first value is limit for short-ping + Eg. if watchdog is pinged sooner than that the watchdog will trigger. + When two values is given the second value is the maximum timeout. + # (HW) minimum for short timeout is 2ms, maximum 220 ms. + # (HW) minimum for max timeout is 4ms, maximum 4416 ms. + + regulators: + $ref: ../regulator/rohm,bd9576-regulator.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@30 { + compatible = "rohm,bd9576"; + reg = <0x30>; + rohm,vout1-en-low; + rohm,vout1-en-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + rohm,ddr-sel-low; + rohm,watchdog-enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + rohm,watchdog-ping-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + rohm,hw-timeout-ms = <150>, <2300>; + + regulators { + boost1: regulator-vd50 { + regulator-name = "VD50"; + }; + buck1: regulator-vd18 { + regulator-name = "VD18"; + }; + buck2: regulator-vdddr { + regulator-name = "VDDDR"; + }; + buck3: regulator-vd10 { + regulator-name = "VD10"; + }; + ldo: regulator-voutl1 { + regulator-name = "VOUTL1"; + }; + sw: regulator-vouts1 { + regulator-name = "VOUTS1"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt deleted file mode 100644 index 30ea27c3936d..000000000000 --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt +++ /dev/null @@ -1,72 +0,0 @@ -Samsung Exynos SoC Low Power Audio Subsystem (LPASS) - -Required properties: - - - compatible : "samsung,exynos5433-lpass" - - reg : should contain the LPASS top SFR region location - and size - - clock-names : should contain following required clocks: "sfr0_ctrl" - - clocks : should contain clock specifiers of all clocks, which - input names have been specified in clock-names - property, in same order. - - #address-cells : should be 1 - - #size-cells : should be 1 - - ranges : must be present - -Each IP block of the Low Power Audio Subsystem should be specified as -an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes: -UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices. - -Bindings of the sub-nodes are described in: - ../serial/samsung_uart.yaml - ../sound/samsung-i2s.txt - ../dma/arm-pl330.txt - - -Example: - -audio-subsystem { - compatible = "samsung,exynos5433-lpass"; - reg = <0x11400000 0x100>, <0x11500000 0x08>; - clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; - clock-names = "sfr0_ctrl"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - adma: adma@11420000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x11420000 0x1000>; - interrupts = <0 73 0>; - clocks = <&cmu_aud CLK_ACLK_DMAC>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - i2s0: i2s0@11440000 { - compatible = "samsung,exynos7-i2s"; - reg = <0x11440000 0x100>; - dmas = <&adma 0 &adma 2>; - dma-names = "tx", "rx"; - interrupts = <0 70 0>; - clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, - <&cmu_aud CLK_SCLK_AUD_I2S>, - <&cmu_aud CLK_SCLK_I2S_BCLK>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - }; - - serial_3: serial@11460000 { - compatible = "samsung,exynos5433-uart"; - reg = <0x11460000 0x100>; - interrupts = <0 67 0>; - clocks = <&cmu_aud CLK_PCLK_AUD_UART>, - <&cmu_aud CLK_SCLK_AUD_UART>; - clock-names = "uart", "clk_uart_baud0"; - pinctrl-names = "default"; - pinctrl-0 = <&uart_aud_bus>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml new file mode 100644 index 000000000000..f154103f32cc --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,exynos5433-lpass.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Low Power Audio Subsystem (LPASS) + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +properties: + compatible: + const: samsung,exynos5433-lpass + + '#address-cells': + const: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sfr0_ctrl + + power-domains: + maxItems: 1 + + ranges: true + + reg: + minItems: 2 + maxItems: 2 + + '#size-cells': + const: 1 + +patternProperties: + "^dma-controller@[0-9a-f]+$": + $ref: /schemas/dma/arm,pl330.yaml + + "^i2s@[0-9a-f]+$": + $ref: /schemas/sound/samsung-i2s.yaml + + "^serial@[0-9a-f]+$": + $ref: /schemas/serial/samsung_uart.yaml + +required: + - compatible + - '#address-cells' + - clocks + - clock-names + - ranges + - reg + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + audio-subsystem@11400000 { + compatible = "samsung,exynos5433-lpass"; + reg = <0x11400000 0x100>, <0x11500000 0x08>; + clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; + clock-names = "sfr0_ctrl"; + power-domains = <&pd_aud>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma-controller@11420000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11420000 0x1000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_aud CLK_ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + dma-channels = <8>; + dma-requests = <32>; + power-domains = <&pd_aud>; + }; + + i2s@11440000 { + compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s"; + reg = <0x11440000 0x100>; + dmas = <&adma 0>, <&adma 2>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_I2S_BCLK>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + power-domains = <&pd_aud>; + #sound-dai-cells = <1>; + }; + + serial@11460000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x11460000 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, + <&cmu_aud CLK_SCLK_AUD_UART>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart_aud_bus>; + power-domains = <&pd_aud>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml new file mode 100644 index 000000000000..055dfc337c2f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,s2mpa01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPA01 Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The Samsung S2MPA01 is a Power Management IC which includes voltage + and current regulators, RTC, clock outputs and other sub-blocks. + +properties: + compatible: + const: samsung,s2mpa01-pmic + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: ../regulator/samsung,s2mpa01.yaml + description: + List of child nodes that specify the regulators. + + wakeup-source: true + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s2mpa01-pmic"; + reg = <0x66>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_MMC2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + // ... + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + + // ... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml new file mode 100644 index 000000000000..5ff6546c72b7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml @@ -0,0 +1,267 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,s2mps11.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The Samsung S2MPS11/13/14/15 and S2MPU02 is a family of Power Management IC + which include voltage and current regulators, RTC, clock outputs and other + sub-blocks. + +properties: + compatible: + enum: + - samsung,s2mps11-pmic + - samsung,s2mps13-pmic + - samsung,s2mps14-pmic + - samsung,s2mps15-pmic + - samsung,s2mpu02-pmic + + clocks: + $ref: ../clock/samsung,s2mps11.yaml + description: + Child node describing clock provider. + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + type: object + description: + List of child nodes that specify the regulators. + + samsung,s2mps11-acokb-ground: + description: | + Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so + the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the + power. Usually the ACOKB is pulled up to VBATT so when PWRHOLD pin goes + low, the rising ACOKB will trigger power off. + type: boolean + + samsung,s2mps11-wrstbi-ground: + description: | + Indicates that WRSTBI pin of PMIC is pulled down. When the system is + suspended it will always go down thus triggerring unwanted buck warm + reset (setting buck voltages to default values). + type: boolean + + wakeup-source: true + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,s2mps11-pmic + then: + properties: + regulators: + $ref: ../regulator/samsung,s2mps11.yaml + samsung,s2mps11-wrstbi-ground: false + + - if: + properties: + compatible: + contains: + const: samsung,s2mps13-pmic + then: + properties: + regulators: + $ref: ../regulator/samsung,s2mps13.yaml + samsung,s2mps11-acokb-ground: false + + - if: + properties: + compatible: + contains: + const: samsung,s2mps14-pmic + then: + properties: + regulators: + $ref: ../regulator/samsung,s2mps14.yaml + samsung,s2mps11-acokb-ground: false + samsung,s2mps11-wrstbi-ground: false + + - if: + properties: + compatible: + contains: + const: samsung,s2mps15-pmic + then: + properties: + regulators: + $ref: ../regulator/samsung,s2mps15.yaml + samsung,s2mps11-acokb-ground: false + samsung,s2mps11-wrstbi-ground: false + + - if: + properties: + compatible: + contains: + const: samsung,s2mpu02-pmic + then: + properties: + regulators: + $ref: ../regulator/samsung,s2mpu02.yaml + samsung,s2mps11-acokb-ground: false + samsung,s2mps11-wrstbi-ground: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps11_irq>; + samsung,s2mps11-acokb-ground; + wakeup-source; + + clocks { + compatible = "samsung,s2mps11-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + LDO4 { + regulator-name = "vdd_adc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + // .... + + BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-coupled-with = <&buck3_reg>; + regulator-coupled-max-spread = <300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-coupled-with = <&buck2_reg>; + regulator-coupled-max-spread = <300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + // ... + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s2mps14-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + + clocks { + compatible = "samsung,s2mps14-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VLDO1_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + // ... + + BUCK1 { + regulator-name = "VBUCK1_1.0V"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + // ... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml new file mode 100644 index 000000000000..aea0b7d57d04 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml @@ -0,0 +1,296 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5M8767 Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The Samsung S5M8767 is a Power Management IC which includes voltage + and current regulators, RTC, clock outputs and other sub-blocks. + +properties: + compatible: + const: samsung,s5m8767-pmic + + clocks: + $ref: ../clock/samsung,s2mps11.yaml + description: + Child node describing clock provider. + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: ../regulator/samsung,s5m8767.yaml + description: + List of child nodes that specify the regulators. + + s5m8767,pmic-buck2-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck2 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck3-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck3 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck4-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck4 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck-ds-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for selecting GPIO DVS lines. + It is one-to-one mapped to dvs gpio lines. + + s5m8767,pmic-buck2-uses-gpio-dvs: + type: boolean + description: buck2 can be controlled by gpio dvs. + + s5m8767,pmic-buck3-uses-gpio-dvs: + type: boolean + description: buck3 can be controlled by gpio dvs. + + s5m8767,pmic-buck4-uses-gpio-dvs: + type: boolean + description: buck4 can be controlled by gpio dvs. + + s5m8767,pmic-buck-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32-array + minimum: 0 + maximum: 7 + default: 0 + description: | + Default voltage setting selected from the possible 8 options selectable + by the dvs gpios. The value of this property should be between 0 and 7. + If not specified or if out of range, the default value of this property + is set to 0. + + s5m8767,pmic-buck-dvs-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for dvs. + + vinb1-supply: + description: Power supply for buck1 + vinb2-supply: + description: Power supply for buck2 + vinb3-supply: + description: Power supply for buck3 + vinb4-supply: + description: Power supply for buck4 + vinb5-supply: + description: Power supply for buck5 + vinb6-supply: + description: Power supply for buck6 + vinb7-supply: + description: Power supply for buck7 + vinb8-supply: + description: Power supply for buck8 + vinb9-supply: + description: Power supply for buck9 + + vinl1-supply: + description: Power supply for LDO3, LDO10, LDO26, LDO27 + vinl2-supply: + description: Power supply for LDO13, LDO16, LDO25, LDO28 + vinl3-supply: + description: Power supply for LDO11, LDO14 + vinl4-supply: + description: Power supply for LDO4, LDO9 + vinl5-supply: + description: Power supply for LDO12, LDO17, LDO19, LDO23 + vinl6-supply: + description: Power supply for LDO18, LDO20, LDO21, LDO24 + vinl7-supply: + description: Power supply for LDO5, LDO22 + vinl8-supply: + description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15 + vinl9-supply: + description: Power supply for LDO2 + + wakeup-source: true + +required: + - compatible + - reg + - regulators + - s5m8767,pmic-buck-ds-gpios + +dependencies: + s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ] + s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ] + s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ] + +additionalProperties: false + +allOf: + - not: + required: + - s5m8767,pmic-buck2-uses-gpio-dvs + - s5m8767,pmic-buck3-uses-gpio-dvs + - not: + required: + - s5m8767,pmic-buck2-uses-gpio-dvs + - s5m8767,pmic-buck4-uses-gpio-dvs + - not: + required: + - s5m8767,pmic-buck3-uses-gpio-dvs + - s5m8767,pmic-buck4-uses-gpio-dvs + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-default-dvs-idx = <3>; + s5m8767,pmic-buck2-uses-gpio-dvs; + + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, + <&gpd1 1 GPIO_ACTIVE_LOW>, + <&gpd1 2 GPIO_ACTIVE_LOW>; + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, + <&gpx2 4 GPIO_ACTIVE_LOW>, + <&gpx2 5 GPIO_ACTIVE_LOW>; + + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + + BUCK1 { + regulator-name = "VDD_MIF"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, + <&gpx2 4 GPIO_ACTIVE_LOW>, + <&gpx2 5 GPIO_ACTIVE_LOW>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt deleted file mode 100644 index c68cdd365153..000000000000 --- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +++ /dev/null @@ -1,86 +0,0 @@ -Binding for Samsung S2M and S5M family multi-function device -============================================================ - -This is a part of device tree bindings for S2M and S5M family multi-function -devices. - -The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family -of multi-function devices which include voltage and current regulators, RTC, -charger controller, clock outputs and other sub-blocks. It is interfaced -to the host controller using an I2C interface. Each sub-block is usually -addressed by the host system using different I2C slave addresses. - - -This document describes bindings for main device node. Optional sub-blocks -must be a sub-nodes to it. Bindings for them can be found in: - - bindings/regulator/samsung,s2mpa01.txt - - bindings/regulator/samsung,s2mps11.txt - - bindings/regulator/samsung,s5m8767.txt - - bindings/clock/samsung,s2mps11.txt - - -Required properties: - - compatible: Should be one of the following - - "samsung,s2mpa01-pmic", - - "samsung,s2mps11-pmic", - - "samsung,s2mps13-pmic", - - "samsung,s2mps14-pmic", - - "samsung,s2mps15-pmic", - - "samsung,s2mpu02-pmic", - - "samsung,s5m8767-pmic". - - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. - -Optional properties: - - interrupts: Interrupt specifiers for interrupt sources. - - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled - down. When the system is suspended it will always go down thus triggerring - unwanted buck warm reset (setting buck voltages to default values). - - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is - connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 - register to turn off the power. Usually the ACOKB is pulled up to VBATT so - when PWRHOLD pin goes low, the rising ACOKB will trigger power off. - -Example: - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - - s2m_osc: clocks { - compatible = "samsung,s2mps11-clk"; - #clock-cells = <1>; - clock-output-names = "xx", "yy", "zz"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml new file mode 100644 index 000000000000..ee0be32ac020 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: silergy sy7636a PMIC + +maintainers: + - Alistair Francis <alistair@alistair23.me> + +properties: + compatible: + const: silergy,sy7636a + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + '#thermal-sensor-cells': + const: 0 + + epd-pwr-good-gpios: + description: + Specifying the power good GPIOs. + maxItems: 1 + + regulators: + type: object + + properties: + compatible: + const: silergy,sy7636a-regulator + + vcom: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + description: + The regulator for the compenstation voltage. Enabling/disabling this + enables/disables the entire device. + properties: + regulator-name: + const: vcom + + additionalProperties: false + +required: + - compatible + - reg + - '#thermal-sensor-cells' + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@62 { + compatible = "silergy,sy7636a"; + reg = <0x62>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epdpmic>; + #thermal-sensor-cells = <0>; + + regulators { + reg_epdpmic: vcom { + regulator-name = "vcom"; + regulator-boot-on; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml new file mode 100644 index 000000000000..a750fa23d7e7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2022 Unisoc Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/sprd,ums512-glbreg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc System Global Register + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +description: + Unisoc system global registers provide register map + for clocks and some multimedia modules of the SoC. + +properties: + compatible: + items: + - enum: + - sprd,ums512-glbregs + - sprd,ums9620-glbregs + - const: syscon + - const: simple-mfd + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^clock-controller@[0-9a-f]+$": + type: object + $ref: /schemas/clock/sprd,ums512-clk.yaml# + description: + Clock controller for the SoC clocks. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + ap_apb_regs: syscon@71000000 { + compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd"; + reg = <0x71000000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x71000000 0x3000>; + + clock-controller@0 { + compatible = "sprd,ums512-apahb-gate"; + reg = <0x0 0x2000>; + #clock-cells = <1>; + }; + }; + + - | + ap_intc5_regs: syscon@32360000 { + compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd"; + reg = <0x32360000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml index ddf190cb800b..27329c5dc38e 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/st,stm32-lptimer.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 Low-Power Timers bindings +title: STMicroelectronics STM32 Low-Power Timers description: | The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several @@ -17,7 +17,7 @@ description: | - simple counter from IN1 input signal. maintainers: - - Fabrice Gasnier <fabrice.gasnier@st.com> + - Fabrice Gasnier <fabrice.gasnier@foss.st.com> properties: compatible: @@ -33,6 +33,9 @@ properties: items: - const: mux + interrupts: + maxItems: 1 + "#address-cells": const: 1 @@ -43,6 +46,7 @@ properties: pwm: type: object + additionalProperties: false properties: compatible: @@ -55,43 +59,46 @@ properties: - "#pwm-cells" - compatible -patternProperties: - "^trigger@[0-9]+$": + counter: type: object + additionalProperties: false properties: compatible: - const: st,stm32-lptimer-trigger - - reg: - description: Identify trigger hardware block. - items: - minimum: 0 - maximum: 2 + const: st,stm32-lptimer-counter required: - compatible - - reg - counter: + timer: type: object + additionalProperties: false properties: compatible: - const: st,stm32-lptimer-counter + const: st,stm32-lptimer-timer required: - compatible - timer: +patternProperties: + "^trigger@[0-9]+$": type: object + additionalProperties: false properties: compatible: - const: st,stm32-lptimer-timer + const: st,stm32-lptimer-trigger + + reg: + description: Identify trigger hardware block. + items: + minimum: 0 + maximum: 2 required: - compatible + - reg required: - "#address-cells" @@ -106,11 +113,13 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> timer@40002400 { compatible = "st,stm32-lptimer"; reg = <0x40002400 0x400>; clocks = <&timer_clk>; clock-names = "mux"; + interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml index 590849ee9f32..f84e09a5743b 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/st,stm32-timers.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 Timers bindings +title: STMicroelectronics STM32 Timers description: | This hardware block provides 3 types of timer along with PWM functionality: @@ -17,8 +17,7 @@ description: | programmable prescaler. maintainers: - - Benjamin Gaignard <benjamin.gaignard@st.com> - - Fabrice Gasnier <fabrice.gasnier@st.com> + - Fabrice Gasnier <fabrice.gasnier@foss.st.com> properties: compatible: @@ -34,7 +33,7 @@ properties: items: - const: int - reset: + resets: maxItems: 1 dmas: @@ -47,6 +46,21 @@ properties: minItems: 1 maxItems: 7 + interrupts: + oneOf: + - maxItems: 1 + - maxItems: 4 + + interrupt-names: + oneOf: + - items: + - const: global + - items: + - const: brk + - const: up + - const: trg-com + - const: cc + "#address-cells": const: 1 @@ -55,6 +69,7 @@ properties: pwm: type: object + additionalProperties: false properties: compatible: @@ -67,31 +82,42 @@ properties: description: One or two <index level filter> to describe break input configurations. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "index" indicates on which break input (0 or 1) the - configuration should be applied. - enum: [ 0 , 1] - - description: | - "level" gives the active level (0=low or 1=high) of the - input signal for this configuration - enum: [ 0, 1 ] - - description: | - "filter" gives the filtering value (up to 15) to be applied. - maximum: 15 - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "index" indicates on which break input (0 or 1) the + configuration should be applied. + enum: [0, 1] + - description: | + "level" gives the active level (0=low or 1=high) of the + input signal for this configuration + enum: [0, 1] + - description: | + "filter" gives the filtering value (up to 15) to be applied. + maximum: 15 + minItems: 1 + maxItems: 2 required: - "#pwm-cells" - compatible + counter: + type: object + additionalProperties: false + + properties: + compatible: + const: st,stm32-timer-counter + + required: + - compatible + patternProperties: "^timer@[0-9]+$": type: object + additionalProperties: false properties: compatible: @@ -102,26 +128,14 @@ patternProperties: reg: description: Identify trigger hardware block. items: - minimum: 0 - maximum: 16 + minimum: 0 + maximum: 16 required: - compatible - reg - counter: - type: object - - properties: - compatible: - const: st,stm32-timer-counter - - required: - - compatible - required: - - "#address-cells" - - "#size-cells" - compatible - reg - clocks @@ -132,7 +146,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/stm32mp1-clks.h> - timers2: timers@40000000 { + timers2: timer@40000000 { #address-cells = <1>; #size-cells = <0>; compatible = "st,stm32-timers"; @@ -150,9 +164,9 @@ examples: #pwm-cells = <3>; st,breakinput = <0 1 5>; }; - timer@0 { + timer@1 { compatible = "st,stm32-timer-trigger"; - reg = <0>; + reg = <1>; }; counter { compatible = "st,stm32-timer-counter"; diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml new file mode 100644 index 000000000000..76551c90b128 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stmfx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Multi-Function eXpander (STMFX) + +description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for + communication with the main MCU. Its main features are GPIO expansion, + main MCU IDD measurement (IDD is the amount of current that flows + through VDD) and resistive touchscreen controller. + +maintainers: + - Amelie Delaunay <amelie.delaunay@foss.st.com> + +properties: + compatible: + const: st,stmfx-0300 + + reg: + enum: [ 0x42, 0x43 ] + + interrupts: + maxItems: 1 + + drive-open-drain: true + + vdd-supply: true + + pinctrl: + type: object + + properties: + compatible: + const: st,stmfx-0300-pinctrl + + "#gpio-cells": + const: 2 + + "#interrupt-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + gpio-ranges: + description: if all STMFX pins[24:0] are available (no other STMFX function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; + if agpio[3:0] are not available (STMFX Touchscreen function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; + if agpio[7:4] are not available (STMFX IDD function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; + maxItems: 1 + + patternProperties: + "^[a-zA-Z]*-pins$": + type: object + additionalProperties: false + + allOf: + - $ref: ../pinctrl/pinmux-node.yaml + + properties: + pins: true + bias-disable: true + bias-pull-up: true + bias-pull-pin-default: true + bias-pull-down: true + drive-open-drain: true + drive-push-pull: true + output-high: true + output-low: true + + additionalProperties: false + + required: + - compatible + - "#gpio-cells" + - "#interrupt-cells" + - gpio-controller + - interrupt-controller + - gpio-ranges + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + + stmfx_pinctrl: pinctrl { + compatible = "st,stmfx-0300-pinctrl"; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick-pins { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-up; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/st,stmpe.yaml b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml new file mode 100644 index 000000000000..b77cc3f3075d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml @@ -0,0 +1,297 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stmpe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Port Expander (STMPE) + +description: STMicroelectronics Port Expander (STMPE) is a series of slow + bus controllers for various expanded peripherals such as GPIO, keypad, + touchscreen, ADC, PWM or rotator. It can contain one or several different + peripherals connected to SPI or I2C. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - st,stmpe601 + - st,stmpe801 + - st,stmpe811 + - st,stmpe1600 + - st,stmpe1601 + - st,stmpe2401 + - st,stmpe2403 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: true + + vio-supply: true + + reset-gpios: + maxItems: 1 + + wakeup-source: true + + st,autosleep-timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 4, 16, 32, 64, 128, 256, 512, 1024 ] + description: Time idle before going to automatic sleep to save power + + st,sample-time: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6 ] + description: | + Sample time per iteration + 0 = 36 clock ticks + 1 = 44 clock ticks + 2 = 56 clock ticks + 3 = 64 clock ticks + 4 = 80 clock ticks - recommended + 5 = 96 clock ticks + 6 = 124 clock ticks + + st,mod-12b: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC bit mode 0 = 10bit ADC, 1 = 12bit ADC + + st,ref-sel: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC reference source 0 = internal, 1 = external + + st,adc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + ADC clock speed + 0 = 1.625 MHz + 1 = 3.25 MHz + 2, 3 = 6.5 MHz + + adc: + type: object + $ref: /schemas/iio/adc/st,stmpe-adc.yaml# + + gpio: + type: object + $ref: /schemas/gpio/st,stmpe-gpio.yaml# + + keyboard-controller: + type: object + $ref: /schemas/input/matrix-keymap.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-keypad + + debounce-interval: + description: Debouncing interval in milliseconds + $ref: /schemas/types.yaml#/definitions/uint32 + + st,no-autorepeat: + description: If present, the keys will not autorepeat when pressed + $ref: /schemas/types.yaml#/definitions/flag + + st,scan-count: + description: Scanning cycles elapsed before key data is updated + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - linux,keymap + + pwm: + type: object + $ref: /schemas/pwm/pwm.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-pwm + + "#pwm-cells": + const: 2 + + touchscreen: + type: object + $ref: /schemas/input/touchscreen/touchscreen.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-ts + + st,ave-ctrl: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + Sample average control + 0 = 1 sample + 1 = 2 samples + 2 = 4 samples + 3 = 8 samples + + st,touch-det-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Touch detection delay + 0 = 10 us + 1 = 50 us + 2 = 100 us + 3 = 500 us - recommended + 4 = 1 ms + 5 = 5 ms + 6 = 10 ms + 7 = 50 ms + + st,settling: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Panel driver settling time + 0 = 10 us + 1 = 100 us + 2 = 500 us - recommended + 3 = 1 ms + 4 = 5 ms + 5 = 10 ms + 6 = 50 ms + 7 = 100 ms + + st,fraction-z: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: Length of the fractional part in z, recommended is 7 + (fraction-z ([0..7]) = Count of the fractional part) + + st,i-drive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: | + current limit value of the touchscreen drivers + 0 = 20 mA (typical 35 mA max) + 1 = 50 mA (typical 80 mA max) + + required: + - compatible + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/input.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + port-expander@43 { + compatible = "st,stmpe2401"; + reg = <0x43>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + vcc-supply = <&db8500_vsmps2_reg>; + vio-supply = <&db8500_vsmps2_reg>; + wakeup-source; + st,autosleep-timeout = <1024>; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + st,norequest-mask = <0xf0f002>; + }; + + keyboard-controller { + compatible = "st,stmpe-keypad"; + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_1) + MATRIX_KEY(0x00, 0x01, KEY_2) + MATRIX_KEY(0x00, 0x02, KEY_3) + MATRIX_KEY(0x00, 0x03, KEY_4) + MATRIX_KEY(0x00, 0x04, KEY_5) + MATRIX_KEY(0x00, 0x05, KEY_6) + MATRIX_KEY(0x00, 0x06, KEY_7) + MATRIX_KEY(0x00, 0x07, KEY_8) + MATRIX_KEY(0x00, 0x08, KEY_9) + MATRIX_KEY(0x00, 0x09, KEY_0) + >; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + }; + + port-expander@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; + st,adc-freq = <1>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,sample-time = <4>; + + adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0f>; + #io-channel-cells = <1>; + }; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + + touchscreen { + compatible = "st,stmpe-ts"; + st,ave-ctrl = <3>; + st,touch-det-delay = <5>; + st,settling = <3>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index be7faa6dc055..b17ebeb0a42f 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -4,12 +4,12 @@ $id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectonics STPMIC1 Power Management IC bindings +title: STMicroelectonics STPMIC1 Power Management IC description: STMicroelectronics STPMIC1 Power Management IC maintainers: - - pascal Paillet <p.paillet@st.com> + - pascal Paillet <p.paillet@foss.st.com> properties: compatible: @@ -29,8 +29,7 @@ properties: onkey: type: object - allOf: - - $ref: ../input/input.yaml + $ref: ../input/input.yaml properties: compatible: @@ -68,8 +67,7 @@ properties: watchdog: type: object - allOf: - - $ref: ../watchdog/watchdog.yaml + $ref: ../watchdog/watchdog.yaml properties: compatible: @@ -108,6 +106,7 @@ properties: const: st,stpmic1-regulators ldo3: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -115,8 +114,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -130,6 +129,7 @@ properties: additionalProperties: false ldo4: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -137,18 +137,21 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true regulator-boot-on: true regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true regulator-over-current-protection: true additionalProperties: false vref_ddr: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -156,8 +159,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -167,6 +170,7 @@ properties: additionalProperties: false boost: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -174,8 +178,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -186,14 +190,11 @@ properties: additionalProperties: false patternProperties: - "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": + "^(buck[1-4]|ldo[1-6]|vref_ddr|boost|pwr_sw[1-2])-supply$": description: STPMIC1 voltage regulators supplies - "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": - allOf: - - $ref: ../regulator/regulator.yaml - "^ldo[1-2,5-6]$": + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -201,8 +202,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -216,6 +217,7 @@ properties: additionalProperties: false "^buck[1-4]$": + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -223,8 +225,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -240,6 +242,7 @@ properties: additionalProperties: false "^pwr_sw[1-2]$": + $ref: /schemas/regulator/regulator.yaml type: object properties: diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml new file mode 100644 index 000000000000..94f9767a927d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml @@ -0,0 +1,522 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/stericsson,ab8500.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST-Ericsson Analog Baseband AB8500 and AB8505 + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + the AB8500 "Analog Baseband" is the mixed-signals integrated circuit + handling power management (regulators), analog-to-digital conversion + (ADC), battery charging, fuel gauging of the battery, battery-backed + RTC, PWM, USB PHY and some GPIO lines in the ST-Ericsson U8500 platforms + in connection with the DB8500 digital baseband. The DB8500 PRCMU + communicates directly and autonomously with the AB8500 and thus it + appears as a subnode of the DB8500 PRCMU. An altered version called + AB8505 also exist, the difference in AB8505 is that some of the USB and + USB charging handling has changed, and it has an embedded USB-to-serial + converter. Most subblocks takes their interrupts directly from the + AB8500 embedded interrupt controller. + +properties: + $nodename: + pattern: '^ab850[05]$' + + compatible: + enum: + - stericsson,ab8500 + - stericsson,ab8505 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + # Some subnodes use a reg, some don't. Those that do use a single cell. + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clock-controller: + description: Node describing the AB8500 clock controller. This + provides the reference clock for the entire U8500 system and + the DB8500 counterpart. + type: object + additionalProperties: false + + properties: + compatible: + const: stericsson,ab8500-clk + + '#clock-cells': + const: 1 + + gpio: + description: Node describing the AB8500 GPIO controller. A few + GPIO pins available for misc usage. + type: object + additionalProperties: false + + properties: + compatible: + enum: + - stericsson,ab8500-gpio + - stericsson,ab8505-gpio + + gpio-controller: true + + '#gpio-cells': + const: 2 + + rtc: + description: Node describing the AB8500 battery-backed RTC. + type: object + additionalProperties: false + + properties: + compatible: + const: stericsson,ab8500-rtc + + interrupts: + items: + - description: 60 second interval alarm interrupt + - description: RTC alarm + + interrupt-names: + items: + - const: 60S + - const: ALARM + + adc: + description: Node describing the AB8500 general purpose analog to digital + converter, GPADC. + type: object + + properties: + compatible: + const: stericsson,ab8500-gpadc + + # AB8505 only supports one (software) EOC interrupt + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: true + + vddadc-supply: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#io-channel-cells': + const: 1 + + patternProperties: + "^channel@[0-9a-f]+$": + type: object + $ref: ../iio/adc/adc.yaml# + description: Represents each of the external channels which are + connected to the ADC. + + properties: + reg: + items: + minimum: 1 + maximum: 31 + + required: + - reg + + additionalProperties: false + + required: + - compatible + - interrupts + - interrupt-names + - vddadc-supply + - '#address-cells' + - '#size-cells' + - '#io-channel-cells' + + additionalProperties: false + + thermal: + description: Node describing the AB8500 thermal control block. All this block + really does is to fire an interrupt when the die becomes 130 degrees Celsius + in temperature. + type: object + + properties: + compatible: + const: stericsson,abx500-temp + + interrupts: + items: + - description: Thermal warm warning interrupt + + interrupt-names: + items: + - const: ABX500_TEMP_WARM + + required: + - compatible + - interrupts + - interrupt-names + + additionalProperties: false + + ab8500_fg: + description: Node describing the AB8500 fuel gauge control block. + type: object + $ref: ../power/supply/stericsson,ab8500-fg.yaml + + ab8500_btemp: + description: Node describing the AB8500 battery temperature control block. + type: object + $ref: ../power/supply/stericsson,ab8500-btemp.yaml + + ab8500_charger: + description: Node describing the AB8500 battery charger control block. + type: object + $ref: ../power/supply/stericsson,ab8500-charger.yaml + + ab8500_chargalg: + description: Node describing the AB8500 battery charger algorithm. + type: object + $ref: ../power/supply/stericsson,ab8500-chargalg.yaml + + phy: + description: Node describing the AB8500 USB PHY control block. + type: object + + properties: + compatible: + const: stericsson,ab8500-usb + + interrupts: + items: + - description: ID wakeup rising IRQ + - description: ID wakeup falling IRQ + - description: VBUS detection falling IRQ + - description: VBUS detection rising IRQ + - description: USB link status change IRQ + - description: ADP probe plug IRQ + - description: ADP probe unplug IRQ + + interrupt-names: + items: + - const: ID_WAKEUP_R + - const: ID_WAKEUP_F + - const: VBUS_DET_F + - const: VBUS_DET_R + - const: USB_LINK_STATUS + - const: USB_ADP_PROBE_PLUG + - const: USB_ADP_PROBE_UNPLUG + + vddulpivio18-supply: true + v-ape-supply: true + musb_1v8-supply: true + + clocks: + items: + - description: PRCMY system clock + + clock-names: + items: + - const: sysclk + + '#phy-cells': + const: 0 + + required: + - compatible + - interrupts + - interrupt-names + - vddulpivio18-supply + - v-ape-supply + - musb_1v8-supply + - clocks + - clock-names + - '#phy-cells' + + additionalProperties: false + + key: + description: Node describing the AB8500 power-on key control block. + type: object + + properties: + compatible: + const: stericsson,ab8500-poweron-key + + interrupts: + items: + - description: ON key falling IRQ + - description: ON key rising IRQ + + interrupt-names: + items: + - const: ONKEY_DBF + - const: ONKEY_DBR + + required: + - compatible + - interrupts + - interrupt-names + + additionalProperties: false + + ab8500-sysctrl: + description: Node describing the AB8500 system control block. + type: object + + properties: + compatible: + const: stericsson,ab8500-sysctrl + + required: + - compatible + + additionalProperties: false + + codec: + description: Node describing the AB8500 audio codec block. + type: object + + properties: + compatible: + const: stericsson,ab8500-codec + + V-AUD-supply: true + V-AMIC1-supply: true + V-AMIC2-supply: true + V-DMIC-supply: true + + clocks: + items: + - description: Audio system clock + + clock-names: + items: + - const: audioclk + + stericsson,earpeice-cmv: + description: Earpiece voltage + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 950, 1100, 1270, 1580 ] + + required: + - compatible + + additionalProperties: false + + regulator: + description: Node describing the AB8500 internal regulators. + type: object + + properties: + compatible: + enum: + - stericsson,ab8500-regulator + - stericsson,ab8505-regulator + + vin-supply: + description: The regulator supplying all of the internal regulators + with power. + + ab8500_ldo_aux1: + description: The voltage for the auxiliary LDO regulator 1 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_aux2: + description: The voltage for the auxiliary LDO regulator 2 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_aux3: + description: The voltage for the auxiliary LDO regulator 3 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_aux4: + description: The voltage for the auxiliary LDO regulator 4 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_aux5: + description: The voltage for the auxiliary LDO regulator 5 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_aux6: + description: The voltage for the auxiliary LDO regulator 6 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + # There is never any AUX7 regulator which is confusing + + ab8500_ldo_aux8: + description: The voltage for the auxiliary LDO regulator 8 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_intcore: + description: The LDO regulator for the internal core voltage + of the AB8500 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_adc: + description: Analog power regulator for the analog to digital converter + ADC, only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_tvout: + description: The voltage for the TV output regulator, incidentally + this voltage is also used for other purposes such as measuring + the temperature of the NTC thermistor on the battery. + Only present on AB8500. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_audio: + description: The LDO regulator for the audio codec output + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_anamic1: + description: The LDO regulator for the analog microphone 1 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_anamic2: + description: The LDO regulator for the analog microphone 2 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_dmic: + description: The LDO regulator for the digital microphone + only present on AB8500 + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ldo_ana: + description: Analog power regulator for CSI and DSI interfaces, + Camera Serial Interface CSI and Display Serial Interface DSI. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + required: + - compatible + + additionalProperties: false + + + regulator-external: + description: Node describing the AB8500 external regulators. This + concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3 + that are normally controlled by external electronics but also + sometimes need to be explicitly controlled by software. + type: object + + properties: + compatible: + const: stericsson,ab8500-ext-regulator + + ab8500_ext1: + description: The voltage for the VSMPS1 external regulator + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ext2: + description: The voltage for the VSMPS2 external regulator + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + ab8500_ext3: + description: The voltage for the VSMPS3 external regulator + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + required: + - compatible + + additionalProperties: false + +patternProperties: + "^pwm@[1-9]+?$": + type: object + $ref: ../pwm/pwm.yaml# + unevaluatedProperties: false + description: Represents each of the PWM blocks in the AB8500 + + properties: + compatible: + const: stericsson,ab8500-pwm + + reg: true + + clocks: + items: + - description: internal clock + + clock-names: + items: + - const: intclk + + required: + - compatible + - reg + +required: + - compatible + - clock-controller + - gpio + - rtc + - adc + - thermal + - ab8500_fg + - ab8500_btemp + - ab8500_charger + - ab8500_chargalg + - phy + - key + - regulator + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml new file mode 100644 index 000000000000..cb2a42caabb5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml @@ -0,0 +1,299 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/stericsson,db8500-prcmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST-Ericsson DB8500 PRCMU - Power Reset and Control Management Unit + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + The DB8500 Power Reset and Control Management Unit is an XP70 8-bit + microprocessor that is embedded in the always-on power domain of the + DB8500 SoCs to manage the low power states, powering up and down parts + of the silicon, and controlling reset of different IP blocks. + +properties: + $nodename: + pattern: '^prcmu@[0-9a-f]+$' + + compatible: + description: The device is compatible both to the device-specific + compatible "stericsson,db8500-prcmu" and "syscon". The latter + compatible is needed for the device to be exposed as a system + controller so that arbitrary registers can be access by + different operating system components. + items: + - const: stericsson,db8500-prcmu + - const: syscon + + reg: + items: + - description: Main PRCMU register area + - description: PRCMU TCPM register area + - description: PRCMU TCDM register area + + reg-names: + items: + - const: prcmu + - const: prcmu-tcpm + - const: prcmu-tcdm + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + db8500-prcmu-regulators: + description: Node describing the DB8500 regulators. These are mainly + power rails inside the silicon but some of those are also routed + out to external pins. + type: object + + properties: + compatible: + const: stericsson,db8500-prcmu-regulator + + db8500_vape: + description: The voltage for the application processor, the + main voltage domain for the chip. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_varm: + description: The voltage for the ARM Cortex-A9 CPU. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_vmodem: + description: The voltage for the modem subsystem. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_vpll: + description: The voltage for the phase locked loop clocks. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_vsmps1: + description: Also known as VIO12, is a step-down voltage regulator + for 1.2V I/O. SMPS means System Management Power Source. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_vsmps2: + description: Also known as VIO18, is a step-down voltage regulator + for 1.8V I/O. SMPS means System Management Power Source. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_vsmps3: + description: This is a step-down voltage regulator + for 0.87 thru 1.875V I/O. SMPS means System Management Power Source. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_vrf1: + description: RF transceiver voltage regulator. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_sva_mmdsp: + description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) + voltage regulator. This is the voltage for the accelerator DSP + for video encoding and decoding. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_sva_mmdsp_ret: + description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) + voltage regulator for retention mode. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_sva_pipe: + description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) + voltage regulator for the data pipe. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_sia_mmdsp: + description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) + voltage regulator. This is the voltage for the accelerator DSP + for image encoding and decoding. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_sia_mmdsp_ret: + description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) + voltage regulator for retention mode. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_sia_pipe: + description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) + voltage regulator for the data pipe. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_sga: + description: Smart Graphics Accelerator (SGA) voltage regulator. + This is in effect controlling the power to the MALI400 3D + accelerator block. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_b2r2_mcde: + description: Blit Blend Rotate and Rescale (B2R2), and Multi-Channel + Display Engine (MCDE) voltage regulator. These are two graphics + blocks. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_esram12: + description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_esram12_ret: + description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for + retention mode. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_esram34: + description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + db8500_esram34_ret: + description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for + retention mode. + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + required: + - compatible + - db8500_vape + - db8500_varm + - db8500_vmodem + - db8500_vpll + - db8500_vsmps1 + - db8500_vsmps2 + - db8500_vsmps3 + - db8500_vrf1 + - db8500_sva_mmdsp + - db8500_sva_mmdsp_ret + - db8500_sva_pipe + - db8500_sia_mmdsp + - db8500_sia_mmdsp_ret + - db8500_sia_pipe + - db8500_sga + - db8500_b2r2_mcde + - db8500_esram12 + - db8500_esram12_ret + - db8500_esram34 + - db8500_esram34_ret + + additionalProperties: false + +patternProperties: + "^thermal@[0-9a-f]+$": + description: Node describing the DB8500 thermal control functions. + This binds to an operating system driver that monitors the + temperature of the SoC. + type: object + + properties: + compatible: + const: stericsson,db8500-thermal + + reg: + maxItems: 1 + + interrupts: + items: + - description: Hotmon low interrupt (falling temperature) + - description: Hotmon high interrupt (rising temperature) + + interrupt-names: + items: + - const: IRQ_HOTMON_LOW + - const: IRQ_HOTMON_HIGH + + '#thermal-sensor-cells': + const: 0 + + additionalProperties: false + + "^prcmu-timer-4@[0-9a-f]+$": + description: Node describing the externally visible timer 4 in the + PRCMU block. This timer is interesting to the operating system + since even thought it has a very low resolution (32768 Hz) it is + always on, and thus provides a consistent monotonic timeline for + the system. + type: object + + properties: + compatible: + const: stericsson,db8500-prcmu-timer-4 + + reg: + maxItems: 1 + + additionalProperties: false + + "^ab850[05]$": + description: Node describing the Analog Baseband 8500 mixed-signals + ASIC AB8500 and subcomponents. The AB8500 is accessed through the + PRCMU and hence it appears here. This component has a separate + set of devicetree bindings. The AB8505 is a newer version of the + same ASIC. + type: object + $ref: stericsson,ab8500.yaml# + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - ranges + - interrupts + - interrupt-controller + - '#interrupt-cells' + - db8500-prcmu-regulators + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt deleted file mode 100644 index f0c2f7fcf5c7..000000000000 --- a/Documentation/devicetree/bindings/mfd/stmfx.txt +++ /dev/null @@ -1,28 +0,0 @@ -STMicroelectonics Multi-Function eXpander (STMFX) Core bindings - -ST Multi-Function eXpander (STMFX) is a slave controller using I2C for -communication with the main MCU. Its main features are GPIO expansion, main -MCU IDD measurement (IDD is the amount of current that flows through VDD) and -resistive touchscreen controller. - -Required properties: -- compatible: should be "st,stmfx-0300". -- reg: I2C slave address of the device. -- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal. - Please refer to ../interrupt-controller/interrupt.txt - -Optional properties: -- drive-open-drain: configure MFX_IRQ_OUT as open drain. -- vdd-supply: phandle of the regulator supplying STMFX. - -Example: - - stmfx: stmfx@42 { - compatible = "st,stmfx-0300"; - reg = <0x42>; - interrupts = <8 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpioi>; - vdd-supply = <&v3v3>; - }; - -Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings. diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt deleted file mode 100644 index d4408a417193..000000000000 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ /dev/null @@ -1,42 +0,0 @@ -* ST Microelectronics STMPE Multi-Functional Device - -STMPE is an MFD device which may expose the following inbuilt devices: gpio, -keypad, touchscreen, adc, pwm, rotator. - -Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device - -Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ - -Optional properties for devices with touch and ADC (STMPE811|STMPE610): - - st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks 4 -> 80 clocks (recommended) - 1 -> 44 clocks 5 -> 96 clocks - 2 -> 56 clocks 6 -> 124 clocks - 3 -> 64 clocks - - st,mod-12b : ADC Bit mode - 0 -> 10bit ADC 1 -> 12bit ADC - - st,ref-sel : ADC reference source - 0 -> internal 1 -> external - - st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz - 1 -> 3.25 MHz - -Example: - - stmpe1601: stmpe1601@40 { - compatible = "st,stmpe1601"; - reg = <0x40>; - interrupts = <26 0x4>; - interrupt-parent = <&gpio6>; - interrupt-controller; - - wakeup-source; - st,autosleep-timeout = <1024>; - }; diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 39375e4313d2..084b5c2a2a3c 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/syscon.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: System Controller Registers R/W Device Tree Bindings +title: System Controller Registers R/W description: | System controller node represents a register region containing a set @@ -17,7 +17,7 @@ description: | and access the registers directly. maintainers: - - Lee Jones <lee.jones@linaro.org> + - Lee Jones <lee@kernel.org> select: properties: @@ -33,17 +33,53 @@ properties: compatible: anyOf: - items: - - enum: - - allwinner,sun8i-a83t-system-controller - - allwinner,sun8i-h3-system-controller - - allwinner,sun8i-v3s-system-controller - - allwinner,sun50i-a64-system-controller - - - const: syscon + - enum: + - allwinner,sun8i-a83t-system-controller + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + - amd,pensando-elba-syscon + - brcm,cru-clkset + - freecom,fsg-cs2-system-controller + - fsl,imx93-aonmix-ns-syscfg + - fsl,imx93-wakeupmix-syscfg + - hisilicon,dsa-subctrl + - hisilicon,hi6220-sramctrl + - hisilicon,pcie-sas-subctrl + - hisilicon,peri-subctrl + - hpe,gxp-sysreg + - intel,lgm-syscon + - loongson,ls1b-syscon + - loongson,ls1c-syscon + - marvell,armada-3700-usb2-host-misc + - mediatek,mt8135-pctl-a-syscfg + - mediatek,mt8135-pctl-b-syscfg + - mediatek,mt8365-syscfg + - microchip,lan966x-cpu-syscon + - microchip,sparx5-cpu-syscon + - mstar,msc313-pmsleep + - nuvoton,ma35d1-sys + - nuvoton,wpcm450-shm + - rockchip,px30-qos + - rockchip,rk3036-qos + - rockchip,rk3066-qos + - rockchip,rk3128-qos + - rockchip,rk3228-qos + - rockchip,rk3288-qos + - rockchip,rk3368-qos + - rockchip,rk3399-qos + - rockchip,rk3568-qos + - rockchip,rk3588-qos + - rockchip,rv1126-qos + - starfive,jh7100-sysmain + - ti,am654-dss-oldi-io-ctrl + + - const: syscon - contains: const: syscon - additionalItems: true + minItems: 2 + maxItems: 5 # Should be enough reg: maxItems: 1 @@ -52,9 +88,10 @@ properties: description: | The size (in bytes) of the IO accesses that should be performed on the device. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4, 8 ] + enum: [1, 2, 4, 8] + + resets: + maxItems: 1 hwlocks: maxItems: 1 @@ -65,7 +102,19 @@ required: - compatible - reg -unevaluatedProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: simple-mfd + then: + properties: + compatible: + minItems: 3 + maxItems: 5 + +additionalProperties: true examples: - | @@ -73,12 +122,4 @@ examples: compatible = "allwinner,sun8i-h3-system-controller", "syscon"; reg = <0x01c00000 0x1000>; }; - - - | - gpr: iomuxc-gpr@20e0000 { - compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; - reg = <0x020e0000 0x38>; - hwlocks = <&hwlock1 1>; - }; - ... diff --git a/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml new file mode 100644 index 000000000000..70b5dfce07d2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,am3359-tscadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI AM3359 Touchscreen controller/ADC + +maintainers: + - Miquel Raynal <miquel.raynal@bootlin.com> + +properties: + compatible: + oneOf: + - const: ti,am3359-tscadc + - items: + - const: ti,am654-tscadc + - const: ti,am3359-tscadc + - const: ti,am4372-magadc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: fck + + dmas: + items: + - description: DMA controller phandle and request line for FIFO0 + - description: DMA controller phandle and request line for FIFO1 + + dma-names: + items: + - const: fifo0 + - const: fifo1 + + adc: + type: object + description: ADC child + + tsc: + type: object + description: Touchscreen controller child + + mag: + type: object + description: Magnetic reader + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tscadc@0 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&adc_tsc_fck>; + clock-names = "fck"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; + + tsc { + }; + + adc { + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml new file mode 100644 index 000000000000..e6289fbe6907 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,j721e-system-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI J721e System Controller Registers R/W + +description: | + This represents the Control Module registers (CTRL_MMR0) on the SoC. + System controller node represents a register region containing a set + of miscellaneous registers. The registers are not cohesive enough to + represent as any specific type of device. The typical use-case is + for some other node's driver, or platform-specific code, to acquire + a reference to the syscon node (e.g. by phandle, node path, or + search using a specific compatible value), interrogate the node (or + associated OS driver) to determine the location of the registers, + and access the registers directly. + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + - Roger Quadros <rogerq@kernel.org> + +properties: + compatible: + items: + - enum: + - ti,j7200-system-controller + - ti,j721e-system-controller + - ti,j721s2-system-controller + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + # Optional children + "^mux-controller@[0-9a-f]+$": + type: object + description: + This is the SERDES lane control mux. + + "^clock-controller@[0-9a-f]+$": + type: object + $ref: /schemas/clock/ti,am654-ehrpwm-tbclk.yaml# + description: + Clock provider for TI EHRPWM nodes. + + "phy@[0-9a-f]+$": + type: object + $ref: /schemas/phy/ti,phy-gmii-sel.yaml# + description: + The phy node corresponding to the ethernet MAC. + + "^chipid@[0-9a-f]+$": + type: object + $ref: /schemas/hwinfo/ti,k3-socinfo.yaml# + description: + The node corresponding to SoC chip identification. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + scm_conf: scm-conf@100000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00100000 0x1c000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + serdes_ln_ctrl: mux-controller@4080 { + compatible = "mmio-mux"; + reg = <0x00004080 0x50>; + + #mux-control-cells = <1>; + mux-reg-masks = + <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ + <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */ + <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */ + <0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */ + <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>; + /* SERDES4 lane0/1/2/3 select */ + }; + + clock-controller@4140 { + compatible = "ti,am654-ehrpwm-tbclk"; + reg = <0x4140 0x18>; + #clock-cells = <1>; + }; + + chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml new file mode 100644 index 000000000000..ae149eb8593d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,lp87524-q1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LP87524-Q1 four 1-phase output buck converter + +maintainers: + - Keerthy <j-keerthy@ti.com> + +properties: + compatible: + const: ti,lp87524-q1 + + reg: + description: I2C slave address + const: 0x60 + + reset-gpios: + description: GPIO connected to NRST pin (active low reset, pin 20) + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number. + The second cell is is used to specify flags. + See ../gpio/gpio.txt for more information. + const: 2 + + regulators: + type: object + + patternProperties: + "^buck[0123]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + required: + - buck0 + - buck1 + - buck2 + - buck3 + + additionalProperties: false + +patternProperties: + "^buck[0123]-in-supply$": + description: Voltage regulator supply for each BUCK converter + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - buck0-in-supply + - buck1-in-supply + - buck2-in-supply + - buck3-in-supply + - regulators + +additionalProperties: false + +examples: + - | + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@60 { + compatible = "ti,lp87524-q1"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + buck0-in-supply = <&vdd_5v0>; + buck1-in-supply = <&vdd_5v0>; + buck2-in-supply = <&vdd_5v0>; + buck3-in-supply = <&vdd_5v0>; + + regulators { + buck0_reg: buck0 { + regulator-name = "buck0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck1_reg: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml new file mode 100644 index 000000000000..5167d6eb904a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,lp87561-q1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LP87561-Q1 single 4-phase output buck converter + +maintainers: + - Keerthy <j-keerthy@ti.com> + +properties: + compatible: + const: ti,lp87561-q1 + + reg: + description: I2C slave address + const: 0x60 + + reset-gpios: + description: GPIO connected to NRST pin (active low reset, pin 20) + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number. + The second cell is is used to specify flags. + See ../gpio/gpio.txt for more information. + const: 2 + + buck3210-in-supply: + description: + Voltage regulator supply for all the four BUCK converters. + + regulators: + type: object + + properties: + buck3210: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + required: + - buck3210 + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - buck3210-in-supply + +additionalProperties: false + +examples: + - | + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@60 { + compatible = "ti,lp87561-q1"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + buck3210-in-supply = <&vsys_3v3>; + + regulators { + buck3210_reg: buck3210 { + /* VDD_CORE */ + regulator-name = "buck3210"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml new file mode 100644 index 000000000000..eca430edf608 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,lp87565-q1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI LP87565-Q1 / LP87565 dual 2-phase output buck converter + +maintainers: + - Keerthy <j-keerthy@ti.com> + +properties: + compatible: + enum: + - ti,lp87565 + - ti,lp87565-q1 + + reg: + description: I2C slave address + const: 0x60 + + reset-gpios: + description: GPIO connected to NRST pin (active low reset, pin 20) + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number. + The second cell is is used to specify flags. + See ../gpio/gpio.txt for more information. + const: 2 + + buck10-in-supply: + description: + Voltage regulator supply for BUCK0 and BUCK1 converters. + + buck23-in-supply: + description: + Voltage regulator supply for BUCK2 and BUCK3 converters. + + regulators: + type: object + + patternProperties: + "^buck(10|23)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + required: + - buck10 + - buck23 + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - buck10-in-supply + - buck23-in-supply + +additionalProperties: false + +examples: + - | + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@60 { + compatible = "ti,lp87565-q1"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + buck10-in-supply = <&vsys_3v3>; + buck23-in-supply = <&vsys_3v3>; + + regulators { + buck10_reg: buck10 { + /* VDD_MPU */ + regulator-name = "buck10"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + buck23_reg: buck23 { + /* VDD_GPU */ + regulator-name = "buck23"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/ti,nspire-misc.yaml b/Documentation/devicetree/bindings/mfd/ti,nspire-misc.yaml new file mode 100644 index 000000000000..28cd5164d46f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,nspire-misc.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,nspire-misc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI Nspire MISC hardware block + +maintainers: + - Andrew Davis <afd@ti.com> + +description: + System controller node represents a register region containing a set + of miscellaneous registers. The registers are not cohesive enough to + represent as any specific type of device. Currently there is a reset + controller. + +properties: + compatible: + items: + - enum: + - ti,nspire-misc + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + reboot: + $ref: /schemas/power/reset/syscon-reboot.yaml# + +required: + - compatible + - reg + - reboot + +additionalProperties: false + +examples: + - | + misc: misc@900a0000 { + compatible = "ti,nspire-misc", "syscon", "simple-mfd"; + reg = <0x900a0000 0x1000>; + + reboot { + compatible = "syscon-reboot"; + offset = <0x08>; + value = <0x02>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml new file mode 100644 index 000000000000..bd36a07c1721 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,tps65086.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TPS65086 Power Management Integrated Circuit (PMIC) + +maintainers: + - Emil Renner Berthing <kernel@esmil.dk> + +properties: + compatible: + const: ti,tps65086 + + reg: + const: 0x5e + description: I2C slave address + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: | + The first cell is the IRQ number. The second cell is the flags, + encoded as trigger masks from ../interrupt-controller/interrupts.txt. + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: | + The first cell is the pin number and the second cell is used to specify + flags. See ../gpio/gpio.txt for more information. + + regulators: + type: object + additionalProperties: false + description: | + List of child nodes that specify the regulator initialization data. + Child nodes must be named after their hardware counterparts: + buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt. + Each child node is defined using the standard binding for regulators and + the optional regulator properties defined below. + + patternProperties: + "^buck[1-6]$": + type: object + $ref: ../regulator/regulator.yaml + + properties: + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + ti,regulator-step-size-25mv: + type: boolean + description: | + Set this if the regulator is factory set with a 25mv step voltage + mapping. + ti,regulator-decay: + type: boolean + description: | + Set this if the output needs to decay, default is for the output + to slew down. + + additionalProperties: false + + "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$": + type: object + $ref: ../regulator/regulator.yaml + + properties: + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - regulators + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic: pmic@5e { + compatible = "ti,tps65086"; + reg = <0x5e>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + buck1 { + regulator-name = "vcc1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1600000>; + regulator-boot-on; + ti,regulator-decay; + ti,regulator-step-size-25mv; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml new file mode 100644 index 000000000000..9d43376bebed --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS6594 Power Management Integrated Circuit + +maintainers: + - Julien Panis <jpanis@baylibre.com> + +description: + TPS6594 is a Power Management IC which provides regulators and others + features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and + PFSM (Pre-configurable Finite State Machine) managing the state of the device. + TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives. + +properties: + compatible: + enum: + - ti,lp8764-q1 + - ti,tps6593-q1 + - ti,tps6594-q1 + + reg: + description: I2C slave address or SPI chip select number. + maxItems: 1 + + ti,primary-pmic: + type: boolean + description: | + Identify the primary PMIC on SPMI bus. + A multi-PMIC synchronization scheme is implemented in the PMIC device + to synchronize the power state changes with other PMIC devices. This is + accomplished through a SPMI bus: the primary PMIC is the controller + device on the SPMI bus, and the secondary PMICs are the target devices + on the SPMI bus. + + system-power-controller: true + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: | + The first cell is the pin number, the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + + interrupts: + maxItems: 1 + + regulators: + type: object + description: List of regulators provided by this controller. + + patternProperties: + "^buck([1-5]|12|34|123|1234)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + unevaluatedProperties: false + + "^ldo[1-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + unevaluatedProperties: false + + allOf: + - if: + required: + - buck12 + then: + properties: + buck123: false + buck1234: false + - if: + required: + - buck123 + then: + properties: + buck34: false + - if: + required: + - buck1234 + then: + properties: + buck34: false + + additionalProperties: false + +patternProperties: + "^buck([1-5]|12|34|123|1234)-supply$": + description: Input supply phandle for each buck. + + "^ldo[1-4]-supply$": + description: Input supply phandle for each ldo. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tps6593: pmic@48 { + compatible = "ti,tps6593-q1"; + reg = <0x48>; + ti,primary-pmic; + system-power-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&mcu_gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + buck123-supply = <&vcc_3v3_sys>; + buck4-supply = <&vcc_3v3_sys>; + buck5-supply = <&vcc_3v3_sys>; + ldo1-supply = <&vcc_3v3_sys>; + ldo2-supply = <&vcc_3v3_sys>; + ldo3-supply = <&buck5>; + ldo4-supply = <&vcc_3v3_sys>; + + regulators { + buck123: buck123 { + regulator-name = "vcc_core"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: buck4 { + regulator-name = "vcc_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: buck5 { + regulator-name = "vcc_1v8_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: ldo1 { + regulator-name = "vddshv5_sdio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: ldo2 { + regulator-name = "vpp_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: ldo3 { + regulator-name = "vcc_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: ldo4 { + regulator-name = "vdda_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml new file mode 100644 index 000000000000..c04d57ba22b4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,twl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TWL family + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: | + The TWLs are Integrated Power Management Chips. + Some version might contain much more analog function like + USB transceiver or Audio amplifier. + These chips are connected to an i2c bus. + +properties: + compatible: + description: + TWL4030 for integrated power-management/audio CODEC device used in OMAP3 + based boards + TWL6030/32 for integrated power-management used in OMAP4 based boards + enum: + - ti,twl4030 + - ti,twl6030 + - ti,twl6032 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + "#clock-cells": + const: 1 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@48 { + compatible = "ti,twl6030"; + reg = <0x48>; + interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + }; + }; + diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt deleted file mode 100644 index 67eac0ed32df..000000000000 --- a/Documentation/devicetree/bindings/mfd/tps65086.txt +++ /dev/null @@ -1,54 +0,0 @@ -* TPS65086 Power Management Integrated Circuit (PMIC) bindings - -Required properties: - - compatible : Should be "ti,tps65086". - - reg : I2C slave address. - - interrupts : The interrupt line the device is connected to. - - interrupt-controller : Marks the device node as an interrupt controller. - - #interrupt-cells : The number of cells to describe an IRQ, should be 2. - The first cell is the IRQ number. - The second cell is the flags, encoded as trigger - masks from ../interrupt-controller/interrupts.txt. - - gpio-controller : Marks the device node as a GPIO Controller. - - #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../gpio/gpio.txt for more information. - - regulators: : List of child nodes that specify the regulator - initialization data. Child nodes must be named - after their hardware counterparts: buck[1-6], - ldoa[1-3], swa1, swb[1-2], and vtt. Each child - node is defined using the standard binding for - regulators and the optional regulator properties - defined below. - -Optional regulator properties: - - ti,regulator-step-size-25mv : This is applicable for buck[1-6], set this - if the regulator is factory set with a 25mv - step voltage mapping. - - ti,regulator-decay : This is applicable for buck[1-6], set this if - the output needs to decay, default is for - the output to slew down. - -Example: - - pmic: tps65086@5e { - compatible = "ti,tps65086"; - reg = <0x5e>; - interrupt-parent = <&gpio1>; - interrupts = <28 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - - regulators { - buck1 { - regulator-name = "vcc1"; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <1600000>; - regulator-boot-on; - ti,regulator-decay; - ti,regulator-step-size-25mv; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/twl-family.txt b/Documentation/devicetree/bindings/mfd/twl-family.txt deleted file mode 100644 index 56f244b5d8a4..000000000000 --- a/Documentation/devicetree/bindings/mfd/twl-family.txt +++ /dev/null @@ -1,46 +0,0 @@ -Texas Instruments TWL family - -The TWLs are Integrated Power Management Chips. -Some version might contain much more analog function like -USB transceiver or Audio amplifier. -These chips are connected to an i2c bus. - - -Required properties: -- compatible : Must be "ti,twl4030"; - For Integrated power-management/audio CODEC device used in OMAP3 - based boards -- compatible : Must be "ti,twl6030"; - For Integrated power-management used in OMAP4 based boards -- interrupts : This i2c device has an IRQ line connected to the main SoC -- interrupt-controller : Since the twl support several interrupts internally, - it is considered as an interrupt controller cascaded to the SoC one. -- #interrupt-cells = <1>; - -Optional node: -- Child nodes contain in the twl. The twl family is made of several variants - that support a different number of features. - The children nodes will thus depend of the capability of the variant. - - -Example: -/* - * Integrated Power Management Chip - * http://www.ti.com/lit/ds/symlink/twl6030.pdf - */ -twl@48 { - compatible = "ti,twl6030"; - reg = <0x48>; - interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <0>; - - twl_rtc { - compatible = "ti,twl_rtc"; - interrupts = <11>; - reg = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml new file mode 100644 index 000000000000..7902f3c5d289 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml @@ -0,0 +1,281 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/wlf,arizona.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a + range of analogue I/O. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + - $ref: /schemas/sound/wlf,arizona.yaml# + - $ref: /schemas/regulator/wlf,arizona.yaml# + - $ref: /schemas/extcon/wlf,arizona.yaml# + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l24 + - wlf,wm1831 + then: + required: + - DCVDD-supply + - MICVDD-supply + else: + properties: + LDOVDD-supply: + description: + Digital power supply, used internally to generate DCVDD when + internally supplied. + + - if: + properties: + compatible: + contains: + enum: + - wlf,wm1814 + - wlf,wm5102 + - wlf,wm5110 + - wlf,wm8280 + - wlf,wm8997 + - wlf,wm8998 + then: + properties: + DBVDD2-supply: + description: + Databus power supply. + + required: + - DBVDD2-supply + - if: + properties: + compatible: + contains: + enum: + - wlf,wm1814 + - wlf,wm5102 + - wlf,wm5110 + - wlf,wm8280 + - wlf,wm8998 + then: + properties: + DBVDD3-supply: + description: + Databus power supply. + + required: + - DBVDD3-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l24 + - wlf,wm1831 + - wlf,wm8997 + then: + properties: + SPKVDD-supply: + description: + Mono speaker driver power supply. + + required: + - SPKVDD-supply + else: + properties: + SPKVDDL-supply: + description: + Left speaker driver power supply. + + SPKVDDR-supply: + description: + Right speaker driver power supply. + + required: + - SPKVDDL-supply + - SPKVDDR-supply + +properties: + compatible: + enum: + - cirrus,cs47l24 + - wlf,wm1814 + - wlf,wm1831 + - wlf,wm5102 + - wlf,wm5110 + - wlf,wm8280 + - wlf,wm8997 + - wlf,wm8998 + + reg: + maxItems: 1 + + AVDD-supply: + description: + Analogue power supply. + + CPVDD-supply: + description: + Charge pump power supply. + + DBVDD1-supply: + description: + Databus power supply. + + DCVDD-supply: + description: + Digital power supply, normally supplied internally except on cs47l24, + wm1831 where it is mandatory. + + MICVDD-supply: + description: + Microphone power supply, normally supplied internally except on + cs47l24, wm1831 where it is mandatory. + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the pin number and the second cell is used to + specify optional parameters. + const: 2 + + wlf,gpio-defaults: + description: + A list of GPIO configuration register values. Defines for the + appropriate values can found in dt-bindings/mfd/arizona.h. If + absent, no configuration of these registers is performed. If any + entry has a value that is out of range for a 16 bit register then the + chip default will be used. If present exactly five values must be + specified. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 5 + + interrupt-controller: true + + '#interrupt-cells': + description: + The first cell is the IRQ number. The second cell is the flags, + encoded as trigger masks. + const: 2 + + interrupts: + maxItems: 1 + + clocks: + description: + Should reference the clocks supplied on MCLK1 and MCLK2. + minItems: 1 + maxItems: 2 + + clock-names: + description: + Should contains two strings mclk1 for the clock supplied on MCLK1, + recommended to be a high quality audio reference clock mclk2 for the + clock supplied on MCLK2, recommended to be an always on 32k clock. + oneOf: + - items: + - const: mclk1 + - items: + - const: mclk2 + - items: + - const: mclk1 + - const: mclk2 + + reset-gpios: + maxItems: 1 + + wlf,reset: + description: + GPIO specifier for the GPIO controlling RESET + deprecated: true + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - AVDD-supply + - CPVDD-supply + - DBVDD1-supply + - gpio-controller + - '#gpio-cells' + - interrupt-controller + - '#interrupt-cells' + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/mfd/arizona.h> + i2c@e0004000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0004000 0x1000>; + + wm5102: codec@1a { + compatible = "wlf,wm5102"; + reg = <0x1a>; + + reset-gpios = <&gpio 0>; + wlf,ldoena = <&gpio 1>; + + AVDD-supply = <&vdd1v8>; + DBVDD1-supply = <&vdd1v8>; + DBVDD2-supply = <&vdd1v8>; + DBVDD3-supply = <&vdd1v8>; + CPVDD-supply = <&vdd1v8>; + LDOVDD-supply = <&vdd1v8>; + SPKVDDL-supply = <&vdd5v>; + SPKVDDR-supply = <&vdd5v>; + + interrupts = <347>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + + gpio-controller; + #gpio-cells = <2>; + + #sound-dai-cells = <1>; + + wlf,gpio-defaults = < + ARIZONA_GP_FN_TXLRCLK + ARIZONA_GP_DEFAULT + ARIZONA_GP_DEFAULT + ARIZONA_GP_DEFAULT + ARIZONA_GP_DEFAULT + >; + + clocks = <&clks 0>, <&clks 1>; + clock-names = "mclk1", "mclk2"; + + wlf,inmode = <ARIZONA_INMODE_DIFF ARIZONA_INMODE_DMIC>; + wlf,dmic-ref = <ARIZONA_DMIC_MICBIAS1 ARIZONA_DMIC_MICBIAS3>; + + wlf,use-jd2; + wlf,use-jd2-nopull; + wlf,jd-invert; + + wlf,micd-software-compare; + wlf,micd-detect-debounce = <0>; + wlf,micd-pol-gpio = <&codec 2 0>; + wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>; + wlf,micd-dbtime = <4>; + wlf,micd-timeout-ms = <100>; + wlf,micd-force-micbias; + wlf,micd-configs = <0 ARIZONA_DMIC_MICBIAS1 0>, + <0x2000 ARIZONA_DMIC_MICBIAS2 1>; + + wlf,gpsw = <ARIZONA_GPSW_OPEN>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml new file mode 100644 index 000000000000..f3d8394b27e7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/x-powers,ac100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: X-Powers AC100 + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + +properties: + compatible: + const: x-powers,ac100 + + reg: + maxItems: 1 + + codec: + type: object + + properties: + "#clock-cells": + const: 0 + + compatible: + const: x-powers,ac100-codec + + interrupts: + maxItems: 1 + + clock-output-names: + maxItems: 1 + description: > + Name of the 4M_adda clock exposed by the codec + + required: + - "#clock-cells" + - compatible + - interrupts + - clock-output-names + + additionalProperties: false + + rtc: + type: object + + properties: + "#clock-cells": + const: 1 + + compatible: + const: x-powers,ac100-rtc + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: > + A phandle to the codec's "4M_adda" clock + + clock-output-names: + maxItems: 3 + description: > + Name of the cko1, cko2 and cko3 clocks exposed by the codec + + required: + - "#clock-cells" + - compatible + - interrupts + - clocks + - clock-output-names + + additionalProperties: false + +required: + - compatible + - reg + - codec + - rtc + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + rsb { + #address-cells = <1>; + #size-cells = <0>; + + codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc"; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml new file mode 100644 index 000000000000..06f1779835a1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml @@ -0,0 +1,416 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: X-Powers AXP PMIC + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + +allOf: + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + + then: + properties: + regulators: + properties: + x-powers,dcdc-freq: + minimum: 750 + maximum: 1875 + default: 1500 + + else: + properties: + regulators: + properties: + x-powers,dcdc-freq: + minimum: 1800 + maximum: 4050 + default: 3000 + + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + + then: + properties: + x-powers,drive-vbus-en: false + + - if: + not: + properties: + compatible: + contains: + const: x-powers,axp806 + + then: + properties: + x-powers,self-working-mode: false + x-powers,master-mode: false + + - if: + not: + properties: + compatible: + contains: + enum: + - x-powers,axp15060 + - x-powers,axp305 + - x-powers,axp313a + + then: + required: + - interrupts + + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp313a + - x-powers,axp15060 + + then: + properties: + x-powers,dcdc-freq: false + +properties: + compatible: + oneOf: + - enum: + - x-powers,axp152 + - x-powers,axp192 + - x-powers,axp202 + - x-powers,axp209 + - x-powers,axp221 + - x-powers,axp223 + - x-powers,axp313a + - x-powers,axp803 + - x-powers,axp806 + - x-powers,axp809 + - x-powers,axp813 + - x-powers,axp15060 + - items: + - const: x-powers,axp228 + - const: x-powers,axp221 + - items: + - const: x-powers,axp805 + - const: x-powers,axp806 + - items: + - const: x-powers,axp305 + - const: x-powers,axp805 + - const: x-powers,axp806 + - items: + - const: x-powers,axp818 + - const: x-powers,axp813 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + x-powers,drive-vbus-en: + type: boolean + description: > + Set this when the N_VBUSEN pin is used as an output pin to control an + external regulator to drive the OTG VBus, rather then as an input pin + which signals whether the board is driving OTG VBus or not. + + x-powers,self-working-mode: + type: boolean + description: > + Set this when the PMIC is wired for self-working mode through the MODESET + pin. + + x-powers,master-mode: + type: boolean + description: > + Set this when the PMIC is wired for master mode through the MODESET pin. + + vin1-supply: + description: > + DCDC1 power supply node, if present. + + vin2-supply: + description: > + DCDC2 power supply node, if present. + + vin3-supply: + description: > + DCDC3 power supply node, if present. + + vin4-supply: + description: > + DCDC4 power supply node, if present. + + vin5-supply: + description: > + DCDC5 power supply node, if present. + + vin6-supply: + description: > + DCDC6 power supply node, if present. + + vin7-supply: + description: > + DCDC7 power supply node, if present. + + vina-supply: + description: > + DCDCA power supply node, if present. + + vinb-supply: + description: > + DCDCB power supply node, if present. + + vinc-supply: + description: > + DCDCC power supply node, if present. + + vind-supply: + description: > + DCDCD power supply node, if present. + + vine-supply: + description: > + DCDCE power supply node, if present. + + acin-supply: + description: > + LDO1 power supply node, if present. + + ldo24in-supply: + description: > + LDO2 and LDO4 power supply node, if present. + + ldo3in-supply: + description: > + LDO3 power supply node, if present. + + ldo5in-supply: + description: > + LDO5 power supply node, if present. + + aldoin-supply: + description: > + ALDO* power supply node, if present. + + bldoin-supply: + description: > + BLDO* power supply node, if present. + + cldoin-supply: + description: > + CLDO* power supply node, if present. + + dldoin-supply: + description: > + DLDO* power supply node, if present. + + eldoin-supply: + description: > + ELDO* power supply node, if present. + + fldoin-supply: + description: > + FLDO* power supply node, if present. + + ips-supply: + description: > + LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present. + + drivevbus-supply: + description: > + DRIVEVBUS power supply node, if present. + + swin-supply: + description: > + SW power supply node, if present. + + adc: + $ref: /schemas/iio/adc/x-powers,axp209-adc.yaml# + + gpio: + $ref: /schemas/gpio/x-powers,axp209-gpio.yaml# + + ac-power: + $ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml# + + battery-power: + $ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml# + + usb-power: + $ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml# + + regulators: + type: object + + properties: + x-powers,dcdc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Defines the work frequency of DC-DC in kHz. + + patternProperties: + "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|cpusldo|drivevbus|dc5ldo)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + properties: + regulator-ramp-delay: + description: > + Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on + the AXP209. + + regulator-soft-start: + description: > + Only valid for the LDO3 regulator. + + x-powers,dcdc-workmode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: > + Only valid for DCDC regulators. Setup 1 for PWM mode, 0 + for AUTO (PWM/PFM) mode. The DCDC regulators work in a + mixed PWM/PFM mode, using PFM under light loads and + switching to PWM for heavier loads. Forcing PWM mode + trades efficiency under light loads for lower output + noise. This probably makes sense for HiFi audio related + applications that aren't battery constrained. + + additionalProperties: false + +required: + - compatible + - reg + - "#interrupt-cells" + - interrupt-controller + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + ac_power_supply: ac-power { + compatible = "x-powers,axp202-ac-power-supply"; + }; + + axp_adc: adc { + compatible = "x-powers,axp209-adc"; + #io-channel-cells = <1>; + }; + + axp_gpio: gpio { + compatible = "x-powers,axp209-gpio"; + gpio-controller; + #gpio-cells = <2>; + + gpio0-adc-pin { + pins = "GPIO0"; + function = "adc"; + }; + }; + + battery_power_supply: battery-power { + compatible = "x-powers,axp209-battery-power-supply"; + }; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <1500>; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; + }; + + reg_ldo1: ldo1 { + /* LDO1 is a fixed output regulator */ + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; + }; + + reg_ldo2: ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + + reg_ldo3: ldo3 { + regulator-name = "ldo3"; + }; + + reg_ldo4: ldo4 { + regulator-name = "ldo4"; + }; + + reg_ldo5: ldo5 { + regulator-name = "ldo5"; + }; + }; + + usb_power_supply: usb-power { + compatible = "x-powers,axp202-usb-power-supply"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml index abc9937506e0..6e880a46d7ee 100644 --- a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml +++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Bootlin %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mfd/xylon,logicvc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Xylon LogiCVC multi-function device @@ -26,6 +26,12 @@ properties: reg: maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + select: properties: compatible: @@ -36,15 +42,22 @@ select: required: - compatible +patternProperties: + "^gpio@[0-9a-f]+$": + $ref: /schemas/gpio/xylon,logicvc-gpio.yaml# + + "^display@[0-9a-f]+$": + $ref: /schemas/display/xylon,logicvc-display.yaml# + required: - compatible - reg +additionalProperties: false + examples: - | logicvc: logicvc@43c00000 { compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; reg = <0x43c00000 0x6000>; - #address-cells = <1>; - #size-cells = <1>; }; |