diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
9 files changed, 308 insertions, 151 deletions
diff --git a/Documentation/devicetree/bindings/mfd/ams,as3711.yaml b/Documentation/devicetree/bindings/mfd/ams,as3711.yaml new file mode 100644 index 000000000000..ad8649cbb2cc --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ams,as3711.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ams,as3711.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Austria MicroSystems AS3711 Quad Buck High Current PMIC with Charger + +maintainers: + - Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> + +description: + AS3711 is an I2C PMIC from Austria MicroSystems with multiple DC/DC and LDO + power supplies, a battery charger and an RTC. So far only bindings for the + two step-up DC/DC converters are defined. + +properties: + compatible: + const: ams,as3711 + + reg: + maxItems: 1 + + backlight: + description: + Step-up converter configuration, to be used as a backlight source + type: object + additionalProperties: false + properties: + compatible: + const: ams,as3711-bl + + su1-dev: + description: Framebuffer phandle for the first step-up converter + $ref: /schemas/types.yaml#/definitions/phandle + + su1-max-uA: + description: Maximum current for the first step-up converter + $ref: /schemas/types.yaml#/definitions/uint32 + + su2-dev: + description: Framebuffer phandle for the second step-up converter + $ref: /schemas/types.yaml#/definitions/phandle + + su2-max-uA: + description: Maximum current for the second step-up converter + $ref: /schemas/types.yaml#/definitions/uint32 + + su2-feedback-voltage: + description: Second step-up converter uses voltage feedback + type: boolean + + su2-feedback-curr1: + description: + Second step-up converter uses CURR1 input for current feedback + type: boolean + + su2-feedback-curr2: + description: + Second step-up converter uses CURR2 input for current feedback + type: boolean + + su2-feedback-curr3: + description: + Second step-up converter uses CURR3 input for current feedback + type: boolean + + su2-feedback-curr-auto: + description: + Second step-up converter uses automatic current feedback selection + type: boolean + + su2-fbprot-lx-sd4: + description: + Second step-up converter uses LX_SD4 for over-voltage protection + type: boolean + + su2-fbprot-gpio2: + description: + Second step-up converter uses GPIO2 for over-voltage protection + type: boolean + + su2-fbprot-gpio3: + description: + Second step-up converter uses GPIO3 for over-voltage protection + type: boolean + + su2-fbprot-gpio4: + description: + Second step-up converter uses GPIO4 for over-voltage protection + type: boolean + + su2-auto-curr1: + description: + Second step-up converter uses CURR1 input for automatic current + feedback + type: boolean + + su2-auto-curr2: + description: + Second step-up converter uses CURR2 input for automatic current + feedback + type: boolean + + su2-auto-curr3: + description: + Second step-up converter uses CURR3 input for automatic current + feedback + type: boolean + + required: + - compatible + + dependentRequired: + # To use the SU1 converter as a backlight source the following two + # properties must be provided: + su1-dev: [ su1-max-uA ] + su1-max-uA: [ su1-dev ] + + # To use the SU2 converter as a backlight source the following two + # properties must be provided: + su2-dev: [ su2-max-uA ] + su2-max-uA: [ su2-dev ] + + su2-feedback-voltage: [ su2-dev ] + su2-feedback-curr1: [ su2-dev ] + su2-feedback-curr2: [ su2-dev ] + su2-feedback-curr3: [ su2-dev ] + su2-feedback-curr-auto: [ su2-dev ] + su2-fbprot-lx-sd4: [ su2-dev ] + su2-fbprot-gpio2: [ su2-dev ] + su2-fbprot-gpio3: [ su2-dev ] + su2-fbprot-gpio4: [ su2-dev ] + su2-auto-curr1: [ su2-feedback-curr-auto ] + su2-auto-curr2: [ su2-feedback-curr-auto ] + su2-auto-curr3: [ su2-feedback-curr-auto ] + + dependentSchemas: + su2-dev: + allOf: + - oneOf: + - required: + - su2-feedback-voltage + - required: + - su2-feedback-curr1 + - required: + - su2-feedback-curr2 + - required: + - su2-feedback-curr3 + - required: + - su2-feedback-curr-auto + - oneOf: + - required: + - su2-fbprot-lx-sd4 + - required: + - su2-fbprot-gpio2 + - required: + - su2-fbprot-gpio3 + - required: + - su2-fbprot-gpio4 + + su2-feedback-curr-auto: + anyOf: + - required: + - su2-auto-curr1 + - required: + - su2-auto-curr2 + - required: + - su2-auto-curr3 + + regulators: + description: Other DC/DC and LDO supplies + type: object + unevaluatedProperties: false + patternProperties: + "^(sd[1-4]|ldo[1-8])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + + backlight { + compatible = "ams,as3711-bl"; + su2-dev = <&lcdc>; + su2-max-uA = <36000>; + su2-feedback-curr-auto; + su2-fbprot-gpio4; + su2-auto-curr1; + su2-auto-curr2; + su2-auto-curr3; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/as3711.txt b/Documentation/devicetree/bindings/mfd/as3711.txt deleted file mode 100644 index d98cf18c721c..000000000000 --- a/Documentation/devicetree/bindings/mfd/as3711.txt +++ /dev/null @@ -1,73 +0,0 @@ -AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power -supplies, a battery charger and an RTC. So far only bindings for the two stepup -DCDC converters are defined. Other DCDC and LDO supplies are configured, using -standard regulator properties, they must belong to a sub-node, called -"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter -configuration should be placed in a subnode, called "backlight." - -Compulsory properties: -- compatible : must be "ams,as3711" -- reg : specifies the I2C address - -To use the SU1 converter as a backlight source the following two properties must -be provided: -- su1-dev : framebuffer phandle -- su1-max-uA : maximum current - -To use the SU2 converter as a backlight source the following two properties must -be provided: -- su2-dev : framebuffer phandle -- su1-max-uA : maximum current - -Additionally one of these properties must be provided to select the type of -feedback used: -- su2-feedback-voltage : voltage feedback is used -- su2-feedback-curr1 : CURR1 input used for current feedback -- su2-feedback-curr2 : CURR2 input used for current feedback -- su2-feedback-curr3 : CURR3 input used for current feedback -- su2-feedback-curr-auto: automatic current feedback selection - -and one of these to select the over-voltage protection pin -- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection -- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection -- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection -- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection - -If "su2-feedback-curr-auto" is selected, one or more of the following properties -have to be specified: -- su2-auto-curr1 : use CURR1 input for current feedback -- su2-auto-curr2 : use CURR2 input for current feedback -- su2-auto-curr3 : use CURR3 input for current feedback - -Example: - -as3711@40 { - compatible = "ams,as3711"; - reg = <0x40>; - - regulators { - sd4 { - regulator-name = "1.215V"; - regulator-min-microvolt = <1215000>; - regulator-max-microvolt = <1235000>; - }; - ldo2 { - regulator-name = "2.8V CPU"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - }; - - backlight { - compatible = "ams,as3711-bl"; - su2-dev = <&lcdc>; - su2-max-uA = <36000>; - su2-feedback-curr-auto; - su2-fbprot-gpio4; - su2-auto-curr1; - su2-auto-curr2; - su2-auto-curr3; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml index bdff5b653453..6a824351834e 100644 --- a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml @@ -17,7 +17,7 @@ description: | node. The SPMI controller part is provided by - Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml + Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml properties: $nodename: @@ -42,13 +42,6 @@ properties: additionalProperties: false - properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - patternProperties: '^ldo[0-9]+$': type: object @@ -66,72 +59,75 @@ additionalProperties: false examples: - | + #include <dt-bindings/spmi/spmi.h> - pmic: pmic@0 { - compatible = "hisilicon,hi6421v600-spmi"; - reg = <0 0>; - - #interrupt-cells = <2>; - interrupt-controller; - interrupt-parent = <&gpio28>; - interrupts = <0 0>; - - regulators { - #address-cells = <1>; + spmi { + #address-cells = <2>; #size-cells = <0>; - ldo3: ldo3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <2000000>; - regulator-boot-on; - }; - - ldo4: ldo4 { - regulator-name = "ldo4"; - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <1900000>; - regulator-boot-on; - }; - - ldo9: ldo9 { - regulator-name = "ldo9"; - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - ldo15: ldo15 { - regulator-name = "ldo15"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo16: ldo16 { - regulator-name = "ldo16"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - }; - - ldo17: ldo17 { - regulator-name = "ldo17"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - }; - - ldo33: ldo33 { - regulator-name = "ldo33"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - ldo34: ldo34 { - regulator-name = "ldo34"; - regulator-min-microvolt = <2600000>; - regulator-max-microvolt = <3300000>; + pmic@0 { + compatible = "hisilicon,hi6421v600-spmi"; + reg = <0 SPMI_USID>; + + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio28>; + interrupts = <0 0>; + + regulators { + ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + }; + + ldo9 { + regulator-name = "ldo9"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo15 { + regulator-name = "ldo15"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo16 { + regulator-name = "ldo16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldo17 { + regulator-name = "ldo17"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + ldo33 { + regulator-name = "ldo33"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo34 { + regulator-name = "ldo34"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + }; }; - }; }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml index 9e4eed34dae8..0c75d8bde568 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -99,10 +99,12 @@ examples: - | #include <dt-bindings/mfd/qcom-pm8008.h> #include <dt-bindings/interrupt-controller/irq.h> - qupv3_se13_i2c { + + i2c { #address-cells = <1>; #size-cells = <0>; - pm8008i@8 { + + pmic@8 { compatible = "qcom,pm8008"; reg = <0x8>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 9fa568603930..8103fb61a16c 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -66,6 +66,7 @@ properties: - qcom,pm8841 - qcom,pm8909 - qcom,pm8916 + - qcom,pm8937 - qcom,pm8941 - qcom,pm8950 - qcom,pm8953 @@ -134,9 +135,15 @@ patternProperties: type: object $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml# + "^battery@[0-9a-f]+$": + type: object + oneOf: + - $ref: /schemas/power/supply/qcom,pm8916-bms-vm.yaml# + "^charger@[0-9a-f]+$": type: object oneOf: + - $ref: /schemas/power/supply/qcom,pm8916-lbc.yaml# - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml# - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml# - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml# diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml index 33c3d023a106..798705ab6a46 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -29,6 +29,8 @@ properties: - qcom,sdx65-tcsr - qcom,sm4450-tcsr - qcom,sm8150-tcsr + - qcom,sm8250-tcsr + - qcom,sm8350-tcsr - qcom,sm8450-tcsr - qcom,tcsr-apq8064 - qcom,tcsr-apq8084 diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml index b97b06848729..f154103f32cc 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml @@ -85,7 +85,7 @@ examples: }; i2s@11440000 { - compatible = "samsung,exynos7-i2s"; + compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; dmas = <&adma 0>, <&adma 2>; dma-names = "tx", "rx"; diff --git a/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml index 996bd4a17ca3..a750fa23d7e7 100644 --- a/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml +++ b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml @@ -19,7 +19,9 @@ description: properties: compatible: items: - - const: sprd,ums512-glbregs + - enum: + - sprd,ums512-glbregs + - sprd,ums9620-glbregs - const: syscon - const: simple-mfd diff --git a/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml index 23a63265be3c..70b5dfce07d2 100644 --- a/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml @@ -61,8 +61,6 @@ required: - interrupts - clocks - clock-names - - dmas - - dma-names additionalProperties: false |