1 files changed, 0 insertions, 37 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
deleted file mode 100644
index e55328237df4..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-NVIDIA Tegra20 MC(Memory Controller)
-
-Required properties:
-- compatible : "nvidia,tegra20-mc-gart"
-- reg : Should contain 2 register ranges: physical base address and length of
-  the controller's registers and the GART aperture respectively.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - mc: the module's clock input
-- interrupts : Should contain MC General interrupt.
-- #reset-cells : Should be 1. This cell represents memory client module ID.
-  The assignments may be found in header file <dt-bindings/memory/tegra20-mc.h>
-  or in the TRM documentation.
-- #iommu-cells: Should be 0. This cell represents the number of cells in an
-  IOMMU specifier needed to encode an address. GART supports only a single
-  address space that is shared by all devices, therefore no additional
-  information needed for the address encoding.
-
-Example:
-	mc: memory-controller@7000f000 {
-		compatible = "nvidia,tegra20-mc-gart";
-		reg = <0x7000f000 0x400		/* controller registers */
-		       0x58000000 0x02000000>;	/* GART aperture */
-		clocks = <&tegra_car TEGRA20_CLK_MC>;
-		clock-names = "mc";
-		interrupts = <GIC_SPI 77 0x04>;
-		#reset-cells = <1>;
-		#iommu-cells = <0>;
-	};
-
-	video-codec@6001a000 {
-		compatible = "nvidia,tegra20-vde";
-		...
-		resets = <&mc TEGRA20_MC_RESET_VDE>;
-		iommus = <&mc>;
-	};