diff options
Diffstat (limited to 'Documentation/devicetree/bindings/media')
239 files changed, 20482 insertions, 4519 deletions
diff --git a/Documentation/devicetree/bindings/media/allegro,al5e.yaml b/Documentation/devicetree/bindings/media/allegro,al5e.yaml new file mode 100644 index 000000000000..2899d26d690e --- /dev/null +++ b/Documentation/devicetree/bindings/media/allegro,al5e.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allegro,al5e.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allegro DVT Video IP Codecs + +maintainers: + - Michael Tretter <m.tretter@pengutronix.de> + +description: |- + Allegro DVT video IP codecs present in the Xilinx ZynqMP SoC. The IP core may + either be a H.264/H.265 encoder or H.264/H.265 decoder ip core. + + Each actual codec engine is controlled by a microcontroller (MCU). Host + software uses a provided mailbox interface to communicate with the MCU. The + MCUs share an interrupt. + +properties: + compatible: + oneOf: + - items: + - const: allegro,al5e-1.1 + - const: allegro,al5e + - items: + - const: allegro,al5d-1.1 + - const: allegro,al5d + + reg: + items: + - description: The registers + - description: The SRAM + + reg-names: + items: + - const: regs + - const: sram + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Core clock + - description: MCU clock + - description: Core AXI master port clock + - description: MCU AXI master port clock + - description: AXI4-Lite slave port clock + + clock-names: + items: + - const: core_clk + - const: mcu_clk + - const: m_axi_core_aclk + - const: m_axi_mcu_aclk + - const: s_axi_lite_aclk + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + +additionalProperties: False + +examples: + - | + fpga { + #address-cells = <2>; + #size-cells = <2>; + + al5e: video-codec@a0009000 { + compatible = "allegro,al5e-1.1", "allegro,al5e"; + reg = <0 0xa0009000 0 0x1000>, + <0 0xa0000000 0 0x8000>; + reg-names = "regs", "sram"; + interrupts = <0 96 4>; + clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>, + <&clkc 71>, <&clkc 71>, <&clkc 71>; + clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk", + "m_axi_mcu_aclk", "s_axi_lite_aclk"; + }; + }; + - | + fpga { + #address-cells = <2>; + #size-cells = <2>; + + al5d: video-codec@a0029000 { + compatible = "allegro,al5d-1.1", "allegro,al5d"; + reg = <0 0xa0029000 0 0x1000>, + <0 0xa0020000 0 0x8000>; + reg-names = "regs", "sram"; + interrupts = <0 96 4>; + clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>, + <&clkc 71>, <&clkc 71>, <&clkc 71>; + clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk", + "m_axi_mcu_aclk", "s_axi_lite_aclk"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/allegro.txt b/Documentation/devicetree/bindings/media/allegro.txt deleted file mode 100644 index a92e2fbf26c9..000000000000 --- a/Documentation/devicetree/bindings/media/allegro.txt +++ /dev/null @@ -1,43 +0,0 @@ -Device-tree bindings for the Allegro DVT video IP codecs present in the Xilinx -ZynqMP SoC. The IP core may either be a H.264/H.265 encoder or H.264/H.265 -decoder ip core. - -Each actual codec engines is controlled by a microcontroller (MCU). Host -software uses a provided mailbox interface to communicate with the MCU. The -MCU share an interrupt. - -Required properties: - - compatible: value should be one of the following - "allegro,al5e-1.1", "allegro,al5e": encoder IP core - "allegro,al5d-1.1", "allegro,al5d": decoder IP core - - reg: base and length of the memory mapped register region and base and - length of the memory mapped sram - - reg-names: must include "regs" and "sram" - - interrupts: shared interrupt from the MCUs to the processing system - - clocks: must contain an entry for each entry in clock-names - - clock-names: must include "core_clk", "mcu_clk", "m_axi_core_aclk", - "m_axi_mcu_aclk", "s_axi_lite_aclk" - -Example: - al5e: video-codec@a0009000 { - compatible = "allegro,al5e-1.1", "allegro,al5e"; - reg = <0 0xa0009000 0 0x1000>, - <0 0xa0000000 0 0x8000>; - reg-names = "regs", "sram"; - interrupts = <0 96 4>; - clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>, - <&clkc 71>, <&clkc 71>, <&clkc 71>; - clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk", - "m_axi_mcu_aclk", "s_axi_lite_aclk" - }; - al5d: video-codec@a0029000 { - compatible = "allegro,al5d-1.1", "allegro,al5d"; - reg = <0 0xa0029000 0 0x1000>, - <0 0xa0020000 0 0x8000>; - reg-names = "regs", "sram"; - interrupts = <0 96 4>; - clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>, - <&clkc 71>, <&clkc 71>, <&clkc 71>; - clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk", - "m_axi_mcu_aclk", "s_axi_lite_aclk" - }; diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml index 8453ee340b9f..617264ce477d 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings +title: Allwinner A10 CMOS Sensor Interface (CSI) maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -20,11 +20,11 @@ properties: - const: allwinner,sun4i-a10-csi1 - const: allwinner,sun7i-a20-csi0 - items: - - const: allwinner,sun7i-a20-csi1 - - const: allwinner,sun4i-a10-csi1 + - const: allwinner,sun7i-a20-csi1 + - const: allwinner,sun4i-a10-csi1 - items: - - const: allwinner,sun8i-r40-csi0 - - const: allwinner,sun7i-a20-csi0 + - const: allwinner,sun8i-r40-csi0 + - const: allwinner,sun7i-a20-csi0 reg: maxItems: 1 @@ -35,24 +35,24 @@ properties: clocks: oneOf: - items: - - description: The CSI interface clock - - description: The CSI DRAM clock + - description: The CSI interface clock + - description: The CSI DRAM clock - items: - - description: The CSI interface clock - - description: The CSI ISP clock - - description: The CSI DRAM clock + - description: The CSI interface clock + - description: The CSI ISP clock + - description: The CSI DRAM clock clock-names: oneOf: - items: - - const: bus - - const: ram + - const: bus + - const: ram - items: - - const: bus - - const: isp - - const: ram + - const: bus + - const: isp + - const: ram resets: maxItems: 1 @@ -67,14 +67,14 @@ properties: interconnect-names: const: dma-mem - # See ./video-interfaces.txt for details port: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false properties: endpoint: - type: object + $ref: video-interfaces.yaml# + unevaluatedProperties: false properties: bus-width: @@ -83,7 +83,6 @@ properties: data-active: true hsync-active: true pclk-sample: true - remote-endpoint: true vsync-active: true required: @@ -91,12 +90,8 @@ properties: - data-active - hsync-active - pclk-sample - - remote-endpoint - vsync-active - required: - - endpoint - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml index 7838804700d6..42dfe22ad5f1 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml @@ -4,29 +4,29 @@ $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-ir.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Infrared Controller Device Tree Bindings +title: Allwinner A10 Infrared Controller maintainers: - Chen-Yu Tsai <wens@csie.org> - Maxime Ripard <mripard@kernel.org> allOf: - - $ref: "rc.yaml#" + - $ref: rc.yaml# properties: compatible: oneOf: - const: allwinner,sun4i-a10-ir - const: allwinner,sun5i-a13-ir - - items: - - const: allwinner,sun8i-a83t-ir - - const: allwinner,sun6i-a31-ir - const: allwinner,sun6i-a31-ir - items: - - const: allwinner,sun50i-a64-ir - - const: allwinner,sun6i-a31-ir - - items: - - const: allwinner,sun50i-h6-ir + - enum: + - allwinner,suniv-f1c100s-ir + - allwinner,sun8i-a83t-ir + - allwinner,sun8i-r40-ir + - allwinner,sun50i-a64-ir + - allwinner,sun50i-h6-ir + - allwinner,sun50i-h616-ir - const: allwinner,sun6i-a31-ir reg: diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml index 526593c8c614..541325f900a1 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-video-engine.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Video Engine Device Tree Bindings +title: Allwinner A10 Video Engine maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -18,6 +18,9 @@ properties: - allwinner,sun7i-a20-video-engine - allwinner,sun8i-a33-video-engine - allwinner,sun8i-h3-video-engine + - allwinner,sun8i-v3s-video-engine + - allwinner,sun8i-r40-video-engine + - allwinner,sun20i-d1-video-engine - allwinner,sun50i-a64-video-engine - allwinner,sun50i-h5-video-engine - allwinner,sun50i-h6-video-engine @@ -45,9 +48,17 @@ properties: allwinner,sram: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to SRAM + - description: register value for device description: Phandle to the device SRAM + iommus: + maxItems: 1 + memory-region: + maxItems: 1 description: CMA pool to use for buffers allocation instead of the default CMA pool. diff --git a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml new file mode 100644 index 000000000000..a4f06bbdfe49 --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun50i-h6-vpu-g2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hantro G2 VPU codec implemented on Allwinner H6 SoC + +maintainers: + - Jernej Skrabec <jernej.skrabec@gmail.com> + +description: + Hantro G2 video decode accelerator present on Allwinner H6 SoC. + +properties: + compatible: + const: allwinner,sun50i-h6-vpu-g2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + + iommus: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun50i-h6-ccu.h> + #include <dt-bindings/reset/sun50i-h6-ccu.h> + + video-codec-g2@1c00000 { + compatible = "allwinner,sun50i-h6-vpu-g2"; + reg = <0x01c00000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_VP9>; + iommus = <&iommu 5>; + }; + +... diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml index 1fd9b5532a21..b3d6db922693 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A31 CMOS Sensor Interface (CSI) Device Tree Bindings +title: Allwinner A31 CMOS Sensor Interface (CSI) maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -40,17 +40,16 @@ properties: resets: maxItems: 1 - # See ./video-interfaces.txt for details port: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + description: Parallel input port, connect to a parallel sensor properties: endpoint: - type: object + $ref: video-interfaces.yaml# + unevaluatedProperties: false properties: - remote-endpoint: true - bus-width: enum: [ 8, 10, 12, 16 ] @@ -60,12 +59,29 @@ properties: required: - bus-width - - remote-endpoint - required: - - endpoint + unevaluatedProperties: false + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: "#/properties/port" - additionalProperties: false + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: MIPI CSI-2 bridge input port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Internal output port to the ISP + + anyOf: + - required: + - port@0 + - required: + - port@1 required: - compatible @@ -75,6 +91,12 @@ required: - clock-names - resets +oneOf: + - required: + - ports + - required: + - port + additionalProperties: false examples: @@ -95,19 +117,25 @@ examples: "ram"; resets = <&ccu RST_BUS_CSI>; - port { - /* Parallel bus endpoint */ - csi1_ep: endpoint { - remote-endpoint = <&adv7611_ep>; - bus-width = <16>; - - /* - * If hsync-active/vsync-active are missing, - * embedded BT.656 sync is used. - */ - hsync-active = <0>; /* Active low */ - vsync-active = <0>; /* Active low */ - pclk-sample = <1>; /* Rising */ + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + /* Parallel bus endpoint */ + csi1_ep: endpoint { + remote-endpoint = <&adv7611_ep>; + bus-width = <16>; + + /* + * If hsync-active/vsync-active are missing, + * embedded BT.656 sync is used. + */ + hsync-active = <0>; /* Active low */ + vsync-active = <0>; /* Active low */ + pclk-sample = <1>; /* Rising */ + }; }; }; }; diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml new file mode 100644 index 000000000000..a61a76bb611c --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-isp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 Image Signal Processor Driver (ISP) + +maintainers: + - Paul Kocialkowski <paul.kocialkowski@bootlin.com> + +properties: + compatible: + enum: + - allwinner,sun6i-a31-isp + - allwinner,sun8i-v3s-isp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + - description: DRAM Clock + + clock-names: + items: + - const: bus + - const: mod + - const: ram + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: CSI0 input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: CSI1 input port + + if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-v3s-isp + then: + required: + - port@0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun8i-v3s-ccu.h> + #include <dt-bindings/reset/sun8i-v3s-ccu.h> + + isp: isp@1cb8000 { + compatible = "allwinner,sun8i-v3s-isp"; + reg = <0x01cb8000 0x1000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + isp_in_csi0: endpoint { + remote-endpoint = <&csi0_out_isp>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml new file mode 100644 index 000000000000..54e15ab8a7f5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 MIPI CSI-2 + +maintainers: + - Paul Kocialkowski <paul.kocialkowski@bootlin.com> + +properties: + compatible: + oneOf: + - const: allwinner,sun6i-a31-mipi-csi2 + - items: + - const: allwinner,sun8i-v3s-mipi-csi2 + - const: allwinner,sun6i-a31-mipi-csi2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: bus + - const: mod + + phys: + maxItems: 1 + description: MIPI D-PHY + + phy-names: + items: + - const: dphy + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Input port, connect to a MIPI CSI-2 sensor + + properties: + reg: + const: 0 + + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + unevaluatedProperties: false + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output port, connect to a CSI controller + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun8i-v3s-ccu.h> + #include <dt-bindings/reset/sun8i-v3s-ccu.h> + + mipi_csi2: csi@1cb1000 { + compatible = "allwinner,sun8i-v3s-mipi-csi2", + "allwinner,sun6i-a31-mipi-csi2"; + reg = <0x01cb1000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CSI>; + + phys = <&dphy>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_csi2_in: port@0 { + reg = <0>; + + mipi_csi2_in_ov5648: endpoint { + data-lanes = <1 2 3 4>; + + remote-endpoint = <&ov5648_out_mipi_csi2>; + }; + }; + + mipi_csi2_out: port@1 { + reg = <1>; + + mipi_csi2_out_csi0: endpoint { + remote-endpoint = <&csi0_in_mipi_csi2>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml index 75196d11da58..c2f292dd01ed 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-de2-rotate.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A83T DE2 Rotate Device Tree Bindings +title: Allwinner A83T DE2 Rotate maintainers: - Jernej Skrabec <jernej.skrabec@siol.net> @@ -20,8 +20,8 @@ properties: oneOf: - const: allwinner,sun8i-a83t-de2-rotate - items: - - const: allwinner,sun50i-a64-de2-rotate - - const: allwinner,sun8i-a83t-de2-rotate + - const: allwinner,sun50i-a64-de2-rotate + - const: allwinner,sun8i-a83t-de2-rotate reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml new file mode 100644 index 000000000000..3cac68a87ad7 --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-mipi-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83T MIPI CSI-2 + +maintainers: + - Paul Kocialkowski <paul.kocialkowski@bootlin.com> + +properties: + compatible: + const: allwinner,sun8i-a83t-mipi-csi2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + - description: MIPI-specific Clock + - description: Misc CSI Clock + + clock-names: + items: + - const: bus + - const: mod + - const: mipi + - const: misc + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Input port, connect to a MIPI CSI-2 sensor + + properties: + reg: + const: 0 + + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + unevaluatedProperties: false + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output port, connect to a CSI controller + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun8i-a83t-ccu.h> + #include <dt-bindings/reset/sun8i-a83t-ccu.h> + + mipi_csi2: csi@1cb1000 { + compatible = "allwinner,sun8i-a83t-mipi-csi2"; + reg = <0x01cb1000 0x1000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_MIPI_CSI>, + <&ccu CLK_CSI_MISC>; + clock-names = "bus", "mod", "mipi", "misc"; + resets = <&ccu RST_BUS_CSI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_csi2_in: port@0 { + reg = <0>; + + mipi_csi2_in_ov8865: endpoint { + data-lanes = <1 2 3 4>; + + remote-endpoint = <&ov8865_out_mipi_csi2>; + }; + }; + + mipi_csi2_out: port@1 { + reg = <1>; + + mipi_csi2_out_csi: endpoint { + remote-endpoint = <&csi_in_mipi_csi2>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml index 8707df613f6c..3ccd52164f5b 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/media/allwinner,sun8i-h3-deinterlace.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner H3 Deinterlace Device Tree Bindings +title: Allwinner H3 Deinterlace maintainers: - Jernej Skrabec <jernej.skrabec@siol.net> @@ -20,8 +20,11 @@ properties: oneOf: - const: allwinner,sun8i-h3-deinterlace - items: - - const: allwinner,sun50i-a64-deinterlace - - const: allwinner,sun8i-h3-deinterlace + - const: allwinner,sun8i-r40-deinterlace + - const: allwinner,sun8i-h3-deinterlace + - items: + - const: allwinner,sun50i-a64-deinterlace + - const: allwinner,sun8i-h3-deinterlace reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml new file mode 100644 index 000000000000..f23fa6d06ad0 --- /dev/null +++ b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 BayLibre, SAS +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/amlogic,axg-ge2d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic GE2D Acceleration Unit + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - amlogic,axg-ge2d + + interrupts: + minItems: 1 + + reg: + minItems: 1 + + resets: + maxItems: 1 + + clocks: + minItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +additionalProperties: false + +examples: + - | + ge2d: ge2d@ff940000 { + compatible = "amlogic,axg-ge2d"; + reg = <0xff940000 0x10000>; + interrupts = <150>; + clocks = <&clk_ge2d>; + resets = <&reset_ge2d>; + }; diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml index 37d77e065491..55930f6107c9 100644 --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -2,13 +2,13 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Video Decoder maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> - Maxime Jourdan <mjourdan@baylibre.com> description: | @@ -29,14 +29,14 @@ properties: compatible: oneOf: - items: - - enum: - - amlogic,gxbb-vdec # GXBB (S905) - - amlogic,gxl-vdec # GXL (S905X, S905D) - - amlogic,gxm-vdec # GXM (S912) - - const: amlogic,gx-vdec + - enum: + - amlogic,gxbb-vdec # GXBB (S905) + - amlogic,gxl-vdec # GXL (S905X, S905D) + - amlogic,gxm-vdec # GXM (S912) + - const: amlogic,gx-vdec - enum: - - amlogic,g12a-vdec # G12A (S905X2, S905D2) - - amlogic,sm1-vdec # SM1 (S905X3, S905D3) + - amlogic,g12a-vdec # G12A (S905X2, S905D2) + - amlogic,sm1-vdec # SM1 (S905X3, S905D3) interrupts: minItems: 2 @@ -67,7 +67,6 @@ properties: clock-names: minItems: 4 - maxItems: 5 items: - const: dos_parser - const: dos @@ -77,13 +76,11 @@ properties: amlogic,ao-sysctrl: description: should point to the AOBUS sysctrl node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle amlogic,canvas: description: should point to a canvas provider node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle allOf: - if: diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml new file mode 100644 index 000000000000..377acce93423 --- /dev/null +++ b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/amlogic,meson-ir-tx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson IR transmitter + +maintainers: + - Viktor Prutyanov <viktor.prutyanov@phystech.edu> + +description: | + Some Amlogic SoCs such as A311D and T950D4 have IR transmitter + (also called blaster) controller onboard. It is capable of + sending IR signals with arbitrary carrier frequency and duty cycle. + +properties: + compatible: + oneOf: + - const: amlogic,meson-ir-tx + - items: + - const: amlogic,meson-g12a-ir-tx + - const: amlogic,meson-ir-tx + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: sysclk + - const: xtal + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/g12a-clkc.h> + + ir@ff80014c { + compatible = "amlogic,meson-g12a-ir-tx", "amlogic,meson-ir-tx"; + reg = <0xff80014c 0x10>; + interrupts = <0 198 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "sysclk", "xtal"; + }; diff --git a/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml new file mode 100644 index 000000000000..0f95fe8dd9ac --- /dev/null +++ b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/amlogic,meson6-ir.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson IR remote control receiver + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: rc.yaml# + +properties: + compatible: + oneOf: + - enum: + - amlogic,meson6-ir + - amlogic,meson8b-ir + - amlogic,meson-gxbb-ir + - amlogic,meson-s4-ir + - items: + - const: amlogic,meson-gx-ir + - const: amlogic,meson-gxbb-ir + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + ir-receiver@c8100480 { + compatible = "amlogic,meson6-ir"; + reg = <0xc8100480 0x20>; + interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; + }; diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml new file mode 100644 index 000000000000..c0d83d755239 --- /dev/null +++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/amphion,vpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amphion VPU codec IP + +maintainers: + - Ming Qian <ming.qian@nxp.com> + - Shijie Qin <shijie.qin@nxp.com> + +description: |- + The Amphion MXC video encoder(Windsor) and decoder(Malone) accelerators present + on NXP i.MX8Q SoCs. + +properties: + $nodename: + pattern: "^vpu@[0-9a-f]+$" + + compatible: + items: + - enum: + - nxp,imx8qm-vpu + - nxp,imx8qxp-vpu + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^mailbox@[0-9a-f]+$": + description: + Each vpu encoder or decoder correspond a MU, which used for communication + between driver and firmware. Implement via mailbox on driver. + $ref: ../mailbox/fsl,mu.yaml# + + + "^vpu-core@[0-9a-f]+$": + description: + Each core correspond a decoder or encoder, need to configure them + separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC + has one decoder and one encoder. + type: object + + properties: + compatible: + items: + - enum: + - nxp,imx8q-vpu-decoder + - nxp,imx8q-vpu-encoder + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + mbox-names: + items: + - const: tx0 + - const: tx1 + - const: rx + + mboxes: + description: + List of phandle of 2 MU channels for tx, 1 MU channel for rx. + maxItems: 3 + + memory-region: + description: + Phandle to the reserved memory nodes to be associated with the + remoteproc device. The reserved memory nodes should be carveout nodes, + and should be defined as per the bindings in + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + items: + - description: region reserved for firmware image sections. + - description: region used for RPC shared memory between firmware and + driver. + + required: + - compatible + - reg + - power-domains + - mbox-names + - mboxes + - memory-region + + additionalProperties: false + +required: + - compatible + - reg + - power-domains + +additionalProperties: false + +examples: + # Device node example for i.MX8QM platform: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + + vpu: vpu@2c000000 { + compatible = "nxp,imx8qm-vpu"; + ranges = <0x2c000000 0x2c000000 0x2000000>; + reg = <0x2c000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&pd IMX_SC_R_VPU>; + + mu_m0: mailbox@2d000000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d000000 0x20000>; + interrupts = <0 472 4>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_0>; + }; + + mu1_m0: mailbox@2d020000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d020000 0x20000>; + interrupts = <0 473 4>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_1>; + }; + + mu2_m0: mailbox@2d040000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d040000 0x20000>; + interrupts = <0 474 4>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_2>; + }; + + vpu_core0: vpu-core@2d080000 { + compatible = "nxp,imx8q-vpu-decoder"; + reg = <0x2d080000 0x10000>; + power-domains = <&pd IMX_SC_R_VPU_DEC_0>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu_m0 0 0>, + <&mu_m0 0 1>, + <&mu_m0 1 0>; + memory-region = <&decoder_boot>, <&decoder_rpc>; + }; + + vpu_core1: vpu-core@2d090000 { + compatible = "nxp,imx8q-vpu-encoder"; + reg = <0x2d090000 0x10000>; + power-domains = <&pd IMX_SC_R_VPU_ENC_0>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu1_m0 0 0>, + <&mu1_m0 0 1>, + <&mu1_m0 1 0>; + memory-region = <&encoder1_boot>, <&encoder1_rpc>; + }; + + vpu_core2: vpu-core@2d0a0000 { + reg = <0x2d0a0000 0x10000>; + compatible = "nxp,imx8q-vpu-encoder"; + power-domains = <&pd IMX_SC_R_VPU_ENC_1>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu2_m0 0 0>, + <&mu2_m0 0 1>, + <&mu2_m0 1 0>; + memory-region = <&encoder2_boot>, <&encoder2_rpc>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/atmel,isc.yaml b/Documentation/devicetree/bindings/media/atmel,isc.yaml new file mode 100644 index 000000000000..dc8aba698d78 --- /dev/null +++ b/Documentation/devicetree/bindings/media/atmel,isc.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2016-2021 Microchip Technology, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/atmel,isc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Image Sensor Controller (ISC) + +maintainers: + - Eugen Hristev <eugen.hristev@microchip.com> + +description: | + The Image Sensor Controller (ISC) device provides the video input capabilities for the + Atmel/Microchip AT91 SAMA family of devices. + + The ISC has a single parallel input that supports RAW Bayer, RGB or YUV video, + with both external synchronization and BT.656 synchronization for the latter. + +properties: + compatible: + const: atmel,sama5d2-isc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + items: + - const: hclock + - const: iscck + - const: gck + + '#clock-cells': + const: 0 + + clock-output-names: + const: isc-mck + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + description: + Input port node, single endpoint describing the input pad. + + properties: + endpoint: + $ref: video-interfaces.yaml# + + properties: + remote-endpoint: true + + bus-width: + enum: [8, 9, 10, 11, 12] + default: 12 + + hsync-active: + enum: [0, 1] + default: 1 + + vsync-active: + enum: [0, 1] + default: 1 + + pclk-sample: + enum: [0, 1] + default: 1 + + required: + - remote-endpoint + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - clock-output-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + isc: isc@f0008000 { + compatible = "atmel,sama5d2-isc"; + reg = <0xf0008000 0x4000>; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&isc_clk>, <&iscck>, <&isc_gclk>; + clock-names = "hclock", "iscck", "gck"; + #clock-cells = <0>; + clock-output-names = "isc-mck"; + + port { + isc_0: endpoint { + remote-endpoint = <&ov7740_0>; + hsync-active = <1>; + vsync-active = <0>; + pclk-sample = <1>; + bus-width = <8>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt deleted file mode 100644 index bbe0e87c6188..000000000000 --- a/Documentation/devicetree/bindings/media/atmel-isc.txt +++ /dev/null @@ -1,65 +0,0 @@ -Atmel Image Sensor Controller (ISC) ----------------------------------------------- - -Required properties for ISC: -- compatible - Must be "atmel,sama5d2-isc". -- reg - Physical base address and length of the registers set for the device. -- interrupts - Should contain IRQ line for the ISC. -- clocks - List of clock specifiers, corresponding to entries in - the clock-names property; - Please refer to clock-bindings.txt. -- clock-names - Required elements: "hclock", "iscck", "gck". -- #clock-cells - Should be 0. -- clock-output-names - Should be "isc-mck". -- pinctrl-names, pinctrl-0 - Please refer to pinctrl-bindings.txt. - -ISC supports a single port node with parallel bus. It should contain one -'port' child node with child 'endpoint' node. Please refer to the bindings -defined in Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: -isc: isc@f0008000 { - compatible = "atmel,sama5d2-isc"; - reg = <0xf0008000 0x4000>; - interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&isc_clk>, <&iscck>, <&isc_gclk>; - clock-names = "hclock", "iscck", "gck"; - #clock-cells = <0>; - clock-output-names = "isc-mck"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>; - - port { - isc_0: endpoint { - remote-endpoint = <&ov7740_0>; - hsync-active = <1>; - vsync-active = <0>; - pclk-sample = <1>; - }; - }; -}; - -i2c1: i2c@fc028000 { - ov7740: camera@21 { - compatible = "ovti,ov7740"; - reg = <0x21>; - clocks = <&isc>; - clock-names = "xvclk"; - assigned-clocks = <&isc>; - assigned-clock-rates = <24000000>; - - port { - ov7740_0: endpoint { - remote-endpoint = <&isc_0>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt b/Documentation/devicetree/bindings/media/cdns,csi2rx.txt deleted file mode 100644 index 6b02a0657ad9..000000000000 --- a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt +++ /dev/null @@ -1,100 +0,0 @@ -Cadence MIPI-CSI2 RX controller -=============================== - -The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI -lanes in input, and 4 different pixel streams in output. - -Required properties: - - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible - - reg: base address and size of the memory mapped region - - clocks: phandles to the clocks driving the controller - - clock-names: must contain: - * sys_clk: main clock - * p_clk: register bank clock - * pixel_if[0-3]_clk: pixel stream output clock, one for each stream - implemented in hardware, between 0 and 3 - -Optional properties: - - phys: phandle to the external D-PHY, phy-names must be provided - - phy-names: must contain "dphy", if the implementation uses an - external D-PHY - -Required subnodes: - - ports: A ports node with one port child node per device input and output - port, in accordance with the video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - port nodes are numbered as follows: - - Port Description - ----------------------------- - 0 CSI-2 input - 1 Stream 0 output - 2 Stream 1 output - 3 Stream 2 output - 4 Stream 3 output - - The stream output port nodes are optional if they are not - connected to anything at the hardware level or implemented - in the design.Since there is only one endpoint per port, - the endpoints are not numbered. - - -Example: - -csi2rx: csi-bridge@0d060000 { - compatible = "cdns,csi2rx"; - reg = <0x0d060000 0x1000>; - clocks = <&byteclock>, <&byteclock> - <&coreclock>, <&coreclock>, - <&coreclock>, <&coreclock>; - clock-names = "sys_clk", "p_clk", - "pixel_if0_clk", "pixel_if1_clk", - "pixel_if2_clk", "pixel_if3_clk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - csi2rx_in_sensor: endpoint { - remote-endpoint = <&sensor_out_csi2rx>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; - }; - - port@1 { - reg = <1>; - - csi2rx_out_grabber0: endpoint { - remote-endpoint = <&grabber0_in_csi2rx>; - }; - }; - - port@2 { - reg = <2>; - - csi2rx_out_grabber1: endpoint { - remote-endpoint = <&grabber1_in_csi2rx>; - }; - }; - - port@3 { - reg = <3>; - - csi2rx_out_grabber2: endpoint { - remote-endpoint = <&grabber2_in_csi2rx>; - }; - }; - - port@4 { - reg = <4>; - - csi2rx_out_grabber3: endpoint { - remote-endpoint = <&grabber3_in_csi2rx>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml new file mode 100644 index 000000000000..2008a47c0580 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence MIPI-CSI2 RX controller + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +description: + The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI + lanes in input, and 4 different pixel streams in output. + +properties: + compatible: + items: + - enum: + - starfive,jh7110-csi2rx + - ti,j721e-csi2rx + - const: cdns,csi2rx + + reg: + maxItems: 1 + + clocks: + items: + - description: CSI2Rx system clock + - description: Gated Register bank clock for APB interface + - description: pixel Clock for Stream interface 0 + - description: pixel Clock for Stream interface 1 + - description: pixel Clock for Stream interface 2 + - description: pixel Clock for Stream interface 3 + + clock-names: + items: + - const: sys_clk + - const: p_clk + - const: pixel_if0_clk + - const: pixel_if1_clk + - const: pixel_if2_clk + - const: pixel_if3_clk + + resets: + items: + - description: CSI2Rx system reset + - description: Gated Register bank reset for APB interface + - description: pixel reset for Stream interface 0 + - description: pixel reset for Stream interface 1 + - description: pixel reset for Stream interface 2 + - description: pixel reset for Stream interface 3 + + reset-names: + items: + - const: sys + - const: reg_bank + - const: pixel_if0 + - const: pixel_if1 + - const: pixel_if2 + - const: pixel_if3 + + phys: + maxItems: 1 + description: MIPI D-PHY + + phy-names: + items: + - const: dphy + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + const: 4 + + clock-lanes: + const: 0 + + data-lanes: + minItems: 1 + maxItems: 4 + items: + maximum: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 0 Output port node + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 1 Output port node + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 2 Output port node + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 3 Output port node + + required: + - port@0 + +required: + - compatible + - reg + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + csi@d060000 { + compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx"; + reg = <0x0d060000 0x1000>; + clocks = <&byteclock 7>, <&byteclock 6>, + <&coreclock 8>, <&coreclock 9>, + <&coreclock 10>, <&coreclock 11>; + clock-names = "sys_clk", "p_clk", + "pixel_if0_clk", "pixel_if1_clk", + "pixel_if2_clk", "pixel_if3_clk"; + resets = <&bytereset 9>, <&bytereset 4>, + <&corereset 5>, <&corereset 6>, + <&corereset 7>, <&corereset 8>; + reset-names = "sys", "reg_bank", + "pixel_if0", "pixel_if1", + "pixel_if2", "pixel_if3"; + phys = <&csi_phy>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi2rx_in_sensor: endpoint { + remote-endpoint = <&sensor_out_csi2rx>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + + port@1 { + reg = <1>; + + csi2rx_out_grabber0: endpoint { + remote-endpoint = <&grabber0_in_csi2rx>; + }; + }; + + port@2 { + reg = <2>; + + csi2rx_out_grabber1: endpoint { + remote-endpoint = <&grabber1_in_csi2rx>; + }; + }; + + port@3 { + reg = <3>; + + csi2rx_out_grabber2: endpoint { + remote-endpoint = <&grabber2_in_csi2rx>; + }; + }; + + port@4 { + reg = <4>; + + csi2rx_out_grabber3: endpoint { + remote-endpoint = <&grabber3_in_csi2rx>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt deleted file mode 100644 index 47e8d73d32a3..000000000000 --- a/Documentation/devicetree/bindings/media/cec-gpio.txt +++ /dev/null @@ -1,42 +0,0 @@ -* HDMI CEC GPIO driver - -The HDMI CEC GPIO module supports CEC implementations where the CEC line -is hooked up to a pull-up GPIO line and - optionally - the HPD line is -hooked up to another GPIO line. - -Please note: the maximum voltage for the CEC line is 3.63V, for the HPD and -5V lines it is 5.3V. So you may need some sort of level conversion circuitry -when connecting them to a GPIO line. - -Required properties: - - compatible: value must be "cec-gpio". - - cec-gpios: gpio that the CEC line is connected to. The line should be - tagged as open drain. - -If the CEC line is associated with an HDMI receiver/transmitter, then the -following property is also required: - - - hdmi-phandle - phandle to the HDMI controller, see also cec.txt. - -If the CEC line is not associated with an HDMI receiver/transmitter, then -the following property is optional and can be used for debugging HPD changes: - - - hpd-gpios: gpio that the HPD line is connected to. - -This property is optional and can be used for debugging changes on the 5V line: - - - v5-gpios: gpio that the 5V line is connected to. - -Example for the Raspberry Pi 3 where the CEC line is connected to -pin 26 aka BCM7 aka CE1 on the GPIO pin header, the HPD line is -connected to pin 11 aka BCM17 and the 5V line is connected to pin -15 aka BCM22 (some level shifter is needed for the HPD and 5V lines!): - -#include <dt-bindings/gpio/gpio.h> - -cec-gpio { - compatible = "cec-gpio"; - cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; - v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/media/cec.txt b/Documentation/devicetree/bindings/media/cec.txt deleted file mode 100644 index 22d7aae3d3d7..000000000000 --- a/Documentation/devicetree/bindings/media/cec.txt +++ /dev/null @@ -1,8 +0,0 @@ -Common bindings for HDMI CEC adapters - -- hdmi-phandle: phandle to the HDMI controller. - -- needs-hpd: if present the CEC support is only available when the HPD - is high. Some boards only let the CEC pin through if the HPD is high, - for example if there is a level converter that uses the HPD to power - up or down. diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml index 95ffa8bc0533..b1fab53418f9 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +++ b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml @@ -2,13 +2,13 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/amlogic,meson-gx-ao-cec.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/cec/amlogic,meson-gx-ao-cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson AO-CEC Controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is @@ -33,12 +33,8 @@ properties: interrupts: maxItems: 1 - hdmi-phandle: - description: phandle to the HDMI controller - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle - allOf: + - $ref: cec-common.yaml# - if: properties: compatible: @@ -82,13 +78,13 @@ required: - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | cec_AO: cec@100 { compatible = "amlogic,meson-gx-ao-cec"; - reg = <0x0 0x00100 0x0 0x14>; + reg = <0x00100 0x14>; interrupts = <199>; clocks = <&clkc_cec>; clock-names = "core"; diff --git a/Documentation/devicetree/bindings/media/cec/cec-common.yaml b/Documentation/devicetree/bindings/media/cec/cec-common.yaml new file mode 100644 index 000000000000..af6ee5f1c73f --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec/cec-common.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cec/cec-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDMI CEC Adapters Common Properties + +maintainers: + - Hans Verkuil <hverkuil@xs4all.nl> + +properties: + $nodename: + pattern: "^cec(@[0-9a-f]+|-[0-9]+)?$" + + hdmi-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the HDMI controller. + + needs-hpd: + type: boolean + description: + The CEC support is only available when the HPD is high. Some boards only + let the CEC pin through if the HPD is high, for example if there is a + level converter that uses the HPD to power up or down. + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml new file mode 100644 index 000000000000..64d7ec057672 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cec/cec-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDMI CEC GPIO + +maintainers: + - Hans Verkuil <hverkuil-cisco@xs4all.nl> + +description: | + The HDMI CEC GPIO module supports CEC implementations where the CEC line is + hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up + to another GPIO line. + + Please note:: the maximum voltage for the CEC line is 3.63V, for the HPD and + 5V lines it is 5.3V. So you may need some sort of level conversion + circuitry when connecting them to a GPIO line. + +properties: + compatible: + const: cec-gpio + + cec-gpios: + maxItems: 1 + description: + GPIO that the CEC line is connected to. The line should be tagged as open + drain. + + hpd-gpios: + maxItems: 1 + description: + GPIO that the HPD line is connected to. Used for debugging HPD changes + when the CEC line is not associated with an HDMI receiver/transmitter. + + v5-gpios: + maxItems: 1 + description: + GPIO that the 5V line is connected to. Used for debugging changes on the + 5V line. + +required: + - compatible + - cec-gpios + +allOf: + - $ref: cec-common.yaml# + - if: + required: + - hdmi-phandle + then: + properties: + hpd-gpios: false + + - if: + required: + - hpd-gpios + then: + properties: + hdmi-phandle: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + cec { + compatible = "cec-gpio"; + cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml b/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml new file mode 100644 index 000000000000..a6b73498bc21 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cec/nvidia,tegra114-cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra HDMI CEC + +maintainers: + - Hans Verkuil <hverkuil-cisco@xs4all.nl> + +allOf: + - $ref: cec-common.yaml# + +properties: + compatible: + enum: + - nvidia,tegra114-cec + - nvidia,tegra124-cec + - nvidia,tegra210-cec + + clocks: + maxItems: 1 + + clock-names: + items: + - const: cec + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - hdmi-phandle + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cec@70015000 { + compatible = "nvidia,tegra124-cec"; + reg = <0x70015000 0x00001000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_CEC>; + clock-names = "cec"; + hdmi-phandle = <&hdmi>; + }; diff --git a/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml new file mode 100644 index 000000000000..016c8a77c1a6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cec/samsung,s5p-cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5PV210 and Exynos HDMI CEC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Marek Szyprowski <m.szyprowski@samsung.com> + +allOf: + - $ref: cec-common.yaml# + +properties: + compatible: + const: samsung,s5p-cec + + clocks: + maxItems: 1 + + clock-names: + items: + - const: hdmicec + + interrupts: + maxItems: 1 + + samsung,syscon-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to PMU system controller interface + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - hdmi-phandle + - interrupts + - samsung,syscon-phandle + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5420.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cec@101b0000 { + compatible = "samsung,s5p-cec"; + reg = <0x101B0000 0x200>; + + clocks = <&clock CLK_HDMI_CEC>; + clock-names = "hdmicec"; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + hdmi-phandle = <&hdmi>; + needs-hpd; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + samsung,syscon-phandle = <&pmu_system_controller>; + }; diff --git a/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml new file mode 100644 index 000000000000..aeddf16ed339 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cec/st,stih-cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STIH4xx HDMI CEC + +maintainers: + - Alain Volmat <alain.volmat@foss.st.com> + +allOf: + - $ref: cec-common.yaml# + +properties: + compatible: + const: st,stih-cec + + clocks: + maxItems: 1 + + clock-names: + items: + - const: cec-clk + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: cec-irq + + resets: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - hdmi-phandle + - interrupts + - resets + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/stih407-resets.h> + + cec@94a087c { + compatible = "st,stih-cec"; + reg = <0x94a087c 0x64>; + + clocks = <&clk_sysin>; + clock-names = "cec-clk"; + hdmi-phandle = <&sti_hdmi>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cec-irq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cec0_default>; + resets = <&softreset STIH407_LPM_SOFTRESET>; + }; diff --git a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml index d75019c093a4..2314a9a14650 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml +++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml @@ -1,14 +1,13 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/media/st,stm32-cec.yaml# +$id: http://devicetree.org/schemas/media/cec/st,stm32-cec.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 CEC bindings +title: STMicroelectronics STM32 CEC maintainers: - - Benjamin Gaignard <benjamin.gaignard@st.com> - - Yannick Fertre <yannick.fertre@st.com> + - Yannick Fertre <yannick.fertre@foss.st.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/media/cnm,wave521c.yaml b/Documentation/devicetree/bindings/media/cnm,wave521c.yaml new file mode 100644 index 000000000000..6a11c1d11fb5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cnm,wave521c.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cnm,wave521c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chips&Media Wave 5 Series multi-standard codec IP + +maintainers: + - Nas Chung <nas.chung@chipsnmedia.com> + - Jackson Lee <jackson.lee@chipsnmedia.com> + +description: + The Chips&Media WAVE codec IP is a multi format video encoder/decoder + +properties: + compatible: + items: + - enum: + - ti,j721s2-wave521c + - const: cnm,wave521c + + reg: + maxItems: 1 + + clocks: + items: + - description: VCODEC clock + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + sram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The VPU uses the SRAM to store some of the reference data instead of + storing it on DMA memory. It is mainly used for the purpose of reducing + bandwidth. + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + vpu: video-codec@12345678 { + compatible = "ti,j721s2-wave521c", "cnm,wave521c"; + reg = <0x12345678 0x1000>; + clocks = <&clks 42>; + interrupts = <42>; + sram = <&sram>; + }; diff --git a/Documentation/devicetree/bindings/media/coda.txt b/Documentation/devicetree/bindings/media/coda.txt deleted file mode 100644 index 90eb74cc1993..000000000000 --- a/Documentation/devicetree/bindings/media/coda.txt +++ /dev/null @@ -1,31 +0,0 @@ -Chips&Media Coda multi-standard codec IP -======================================== - -Coda codec IPs are present in i.MX SoCs in various versions, -called VPU (Video Processing Unit). - -Required properties: -- compatible : should be "fsl,<chip>-src" for i.MX SoCs: - (a) "fsl,imx27-vpu" for CodaDx6 present in i.MX27 - (b) "fsl,imx51-vpu" for CodaHx4 present in i.MX51 - (c) "fsl,imx53-vpu" for CODA7541 present in i.MX53 - (d) "fsl,imx6q-vpu" for CODA960 present in i.MX6q -- reg: should be register base and length as documented in the - SoC reference manual -- interrupts : Should contain the VPU interrupt. For CODA960, - a second interrupt is needed for the MJPEG unit. -- clocks : Should contain the ahb and per clocks, in the order - determined by the clock-names property. -- clock-names : Should be "ahb", "per" -- iram : phandle pointing to the SRAM device node - -Example: - -vpu: vpu@63ff4000 { - compatible = "fsl,imx53-vpu"; - reg = <0x63ff4000 0x1000>; - interrupts = <9>; - clocks = <&clks 63>, <&clks 63>; - clock-names = "ahb", "per"; - iram = <&ocram>; -}; diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml new file mode 100644 index 000000000000..c9d5adbc8c4a --- /dev/null +++ b/Documentation/devicetree/bindings/media/coda.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/coda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chips&Media Coda multi-standard codec IP + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + +description: |- + Coda codec IPs are present in i.MX SoCs in various versions, + called VPU (Video Processing Unit). + +properties: + compatible: + oneOf: + - items: + - const: fsl,imx27-vpu + - const: cnm,codadx6 + - items: + - const: fsl,imx51-vpu + - const: cnm,codahx4 + - items: + - const: fsl,imx53-vpu + - const: cnm,coda7541 + - items: + - enum: + - fsl,imx6dl-vpu + - fsl,imx6q-vpu + - const: cnm,coda960 + + reg: + maxItems: 1 + + clocks: + items: + - description: PER clock + - description: AHB interface clock + + clock-names: + items: + - const: per + - const: ahb + + interrupts: + minItems: 1 + items: + - description: BIT processor interrupt + - description: JPEG unit interrupt + + interrupt-names: + minItems: 1 + items: + - const: bit + - const: jpeg + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + iram: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle pointing to the SRAM device node + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: cnm,coda960 + then: + properties: + interrupts: + minItems: 2 + + interrupt-names: + minItems: 2 + else: + properties: + interrupts: + maxItems: 1 + + power-domains: false + +examples: + - | + vpu: video-codec@63ff4000 { + compatible = "fsl,imx53-vpu", "cnm,coda7541"; + reg = <0x63ff4000 0x1000>; + interrupts = <9>; + clocks = <&clks 63>, <&clks 63>; + clock-names = "per", "ahb"; + iram = <&ocram>; + }; diff --git a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt deleted file mode 100644 index 0bf6fb7fbeab..000000000000 --- a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt +++ /dev/null @@ -1,16 +0,0 @@ -Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE) - -Required properties: - -- compatible : should be one of: - "samsung,exynos4212-fimc-lite" for Exynos4212/4412 SoCs, - "samsung,exynos5250-fimc-lite" for Exynos5250 compatible - devices; -- reg : physical base address and size of the device memory mapped - registers; -- interrupts : should contain FIMC-LITE interrupt; -- clocks : FIMC LITE gate clock should be specified in this property. -- clock-names : should contain "flite" entry. - -Each FIMC device should have an alias in the aliases node, in the form of -fimc-lite<n>, where <n> is an integer specifying the IP block instance. diff --git a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt deleted file mode 100644 index ce9a22689e53..000000000000 --- a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt +++ /dev/null @@ -1,16 +0,0 @@ -Samsung S5P/Exynos SoC series JPEG codec - -Required properties: - -- compatible : should be one of: - "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg", - "samsung,exynos3250-jpeg", "samsung,exynos5420-jpeg", - "samsung,exynos5433-jpeg"; -- reg : address and length of the JPEG codec IP register set; -- interrupts : specifies the JPEG codec IP interrupt; -- clock-names : should contain: - - "jpeg" for the core gate clock, - - "sclk" for the special clock (optional). -- clocks : should contain the clock specifier and clock ID list - matching entries in the clock-names property; from - the common clock bindings. diff --git a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt deleted file mode 100644 index 32ced99d4244..000000000000 --- a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt +++ /dev/null @@ -1,50 +0,0 @@ -Exynos4x12 SoC series Imaging Subsystem (FIMC-IS) - -The FIMC-IS is a subsystem for processing image signal from an image sensor. -The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5 -processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C -and SPI bus controllers, PWM and ADC. - -fimc-is node ------------- - -Required properties: -- compatible : should be "samsung,exynos4212-fimc-is" for Exynos4212 and - Exynos4412 SoCs; -- reg : physical base address and length of the registers set; -- interrupts : must contain two FIMC-IS interrupts, in order: ISP0, ISP1; -- clocks : list of clock specifiers, corresponding to entries in - clock-names property; -- clock-names : must contain "ppmuispx", "ppmuispx", "lite0", "lite1" - "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "gicisp", - "pwm_isp", "mcuctl_isp", "uart", "ispdiv0", "ispdiv1", - "mcuispdiv0", "mcuispdiv1", "aclk200", "div_aclk200", - "aclk400mcuisp", "div_aclk400mcuisp" entries, - matching entries in the clocks property. -pmu subnode ------------ - -Required properties: - - reg : must contain PMU physical base address and size of the register set. - -The following are the FIMC-IS peripheral device nodes and can be specified -either standalone or as the fimc-is node child nodes. - -i2c-isp (ISP I2C bus controller) nodes ------------------------------------------- - -Required properties: - -- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212 and - Exynos4412 SoCs; -- reg : physical base address and length of the registers set; -- clocks : must contain gate clock specifier for this controller; -- clock-names : must contain "i2c_isp" entry. - -For the above nodes it is required to specify a pinctrl state named "default", -according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt. - -Device tree nodes of the image sensors' controlled directly by the FIMC-IS -firmware must be child nodes of their corresponding ISP I2C bus controller node. -The data link of these image sensors must be specified using the common video -interfaces bindings, defined in video-interfaces.txt. diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt deleted file mode 100644 index 1872688fa408..000000000000 --- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Samsung Exynos5 G-Scaler device - -G-Scaler is used for scaling and color space conversion on Exynos5 SoCs. - -Required properties: -- compatible: should be one of - "samsung,exynos5250-gsc" - "samsung,exynos5420-gsc" - "samsung,exynos5433-gsc" - "samsung,exynos5-gsc" (deprecated) -- reg: should contain G-Scaler physical address location and length. -- interrupts: should contain G-Scaler interrupt number - -Optional properties: -- samsung,sysreg: handle to syscon used to control the system registers to - set writeback input and destination - -Example: - -gsc_0: gsc@13e00000 { - compatible = "samsung,exynos5250-gsc"; - reg = <0x13e00000 0x1000>; - interrupts = <0 85 0>; -}; - -Aliases: -Each G-Scaler node should have a numbered alias in the aliases node, -in the form of gscN, N = 0...3. G-Scaler driver uses these aliases -to retrieve the device IDs using "of_alias_get_id()" call. - -Example: - -aliases { - gsc0 =&gsc_0; - gsc1 =&gsc_1; - gsc2 =&gsc_2; - gsc3 =&gsc_3; -}; diff --git a/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml b/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml new file mode 100644 index 000000000000..84a5e894ace4 --- /dev/null +++ b/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/fsl,imx6ull-pxp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Pixel Pipeline + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + - Michael Tretter <m.tretter@pengutronix.de> + +description: + The Pixel Pipeline (PXP) is a memory-to-memory graphics processing engine + that supports scaling, colorspace conversion, alpha blending, rotation, and + pixel conversion via lookup table. Different versions are present on various + i.MX SoCs from i.MX23 to i.MX7. + +properties: + compatible: + oneOf: + - enum: + - fsl,imx6ul-pxp + - fsl,imx6ull-pxp + - fsl,imx7d-pxp + - items: + - enum: + - fsl,imx6sll-pxp + - fsl,imx6sx-pxp + - const: fsl,imx6ull-pxp + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 1 + + clock-names: + const: axi + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6sx-pxp + - fsl,imx6ul-pxp + then: + properties: + interrupts: + maxItems: 1 + else: + properties: + interrupts: + minItems: 2 + maxItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6ul-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pxp: pxp@21cc000 { + compatible = "fsl,imx6ull-pxp"; + reg = <0x021cc000 0x4000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "axi"; + clocks = <&clks IMX6UL_CLK_PXP>; + }; diff --git a/Documentation/devicetree/bindings/media/fsl-pxp.txt b/Documentation/devicetree/bindings/media/fsl-pxp.txt deleted file mode 100644 index f8090e06530d..000000000000 --- a/Documentation/devicetree/bindings/media/fsl-pxp.txt +++ /dev/null @@ -1,26 +0,0 @@ -Freescale Pixel Pipeline -======================== - -The Pixel Pipeline (PXP) is a memory-to-memory graphics processing engine -that supports scaling, colorspace conversion, alpha blending, rotation, and -pixel conversion via lookup table. Different versions are present on various -i.MX SoCs from i.MX23 to i.MX7. - -Required properties: -- compatible: should be "fsl,<soc>-pxp", where SoC can be one of imx23, imx28, - imx6dl, imx6sl, imx6sll, imx6ul, imx6sx, imx6ull, or imx7d. -- reg: the register base and size for the device registers -- interrupts: the PXP interrupt, two interrupts for imx6ull and imx7d. -- clock-names: should be "axi" -- clocks: the PXP AXI clock - -Example: - -pxp@21cc000 { - compatible = "fsl,imx6ull-pxp"; - reg = <0x021cc000 0x4000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "axi"; - clocks = <&clks IMX6UL_CLK_PXP>; -}; diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt deleted file mode 100644 index 58261fb7b408..000000000000 --- a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt +++ /dev/null @@ -1,17 +0,0 @@ -Device-Tree bindings for GPIO IR receiver - -Required properties: - - compatible: should be "gpio-ir-receiver". - - gpios: specifies GPIO used for IR signal reception. - -Optional properties: - - linux,rc-map-name: see rc.txt file in the same - directory. - -Example node: - - ir: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio0 19 1>; - linux,rc-map-name = "rc-rc6-mce"; - }; diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml new file mode 100644 index 000000000000..008c007ed702 --- /dev/null +++ b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/gpio-ir-receiver.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO Based IR receiver + +maintainers: + - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + +allOf: + - $ref: rc.yaml# + +properties: + compatible: + const: gpio-ir-receiver + + gpios: + maxItems: 1 + + linux,autosuspend-period: + description: autosuspend delay time in milliseconds + $ref: /schemas/types.yaml#/definitions/uint32 + + wakeup-source: + description: IR receiver can wake-up the system. + +required: + - compatible + - gpios + +unevaluatedProperties: false + +examples: + - | + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 19 1>; + linux,rc-map-name = "rc-rc6-mce"; + linux,autosuspend-period = <125>; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.txt b/Documentation/devicetree/bindings/media/i2c/adv7180.txt deleted file mode 100644 index 552b6a82cb1f..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/adv7180.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Analog Devices ADV7180 analog video decoder family - -The adv7180 family devices are used to capture analog video to different -digital interfaces like MIPI CSI-2 or parallel video. - -Required Properties : -- compatible : value must be one of - "adi,adv7180" - "adi,adv7180cp" - "adi,adv7180st" - "adi,adv7182" - "adi,adv7280" - "adi,adv7280-m" - "adi,adv7281" - "adi,adv7281-m" - "adi,adv7281-ma" - "adi,adv7282" - "adi,adv7282-m" - -Device nodes of "adi,adv7180cp" and "adi,adv7180st" must contain one -'port' child node per device input and output port, in accordance with the -video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. The port -nodes are numbered as follows. - - Port adv7180cp adv7180st -------------------------------------------------------------------- - Input 0-2 0-5 - Output 3 6 - -The digital output port node must contain at least one endpoint. - -Optional Properties : -- powerdown-gpios: reference to the GPIO connected to the powerdown pin, - if any. - - -Example: - - i2c0@1c22000 { - ... - ... - adv7180@21 { - compatible = "adi,adv7180"; - reg = <0x21>; - }; - ... - }; - diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml new file mode 100644 index 000000000000..c8d887eee3bb --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/adv7180.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV7180 analog video decoder family + +maintainers: + - Lars-Peter Clausen <lars@metafoo.de> + +description: + The adv7180 family devices are used to capture analog video to different + digital interfaces like MIPI CSI-2 or parallel video. + +properties: + compatible: + items: + - enum: + - adi,adv7180 + - adi,adv7180cp + - adi,adv7180st + - adi,adv7182 + - adi,adv7280 + - adi,adv7280-m + - adi,adv7281 + - adi,adv7281-m + - adi,adv7281-ma + - adi,adv7282 + - adi,adv7282-m + + reg: + maxItems: 1 + + powerdown-gpios: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + adv,force-bt656-4: + description: + Indicates that the output is a BT.656-4 compatible stream. + type: boolean + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + ports: true + +additionalProperties: false + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + enum: + - adi,adv7180 + - adi,adv7182 + - adi,adv7280 + - adi,adv7280-m + - adi,adv7281 + - adi,adv7281-m + - adi,adv7281-ma + - adi,adv7282 + - adi,adv7282-m + then: + required: + - port + + - if: + properties: + compatible: + contains: + const: adi,adv7180cp + then: + properties: + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Output port + + patternProperties: + "^port@[0-2]$": + $ref: /schemas/graph.yaml#/properties/port + description: Input port + + required: + - port@3 + + required: + - ports + + - if: + properties: + compatible: + contains: + const: adi,adv7180st + then: + properties: + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@6: + $ref: /schemas/graph.yaml#/properties/port + description: Output port + + patternProperties: + "^port@[0-5]$": + $ref: /schemas/graph.yaml#/properties/port + description: Input port + + required: + - port@6 + + required: + - ports + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep>; + }; + }; + }; + + }; + + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + composite-in@20 { + compatible = "adi,adv7180cp"; + reg = <0x20>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + adv7180_out: endpoint { + remote-endpoint = <&vin4_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt deleted file mode 100644 index 4f91686e54a6..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt +++ /dev/null @@ -1,116 +0,0 @@ -* Analog Devices ADV748X video decoder with HDMI receiver - -The ADV7481 and ADV7482 are multi format video decoders with an integrated -HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB -from three input sources HDMI, analog and TTL. - -Required Properties: - - - compatible: Must contain one of the following - - "adi,adv7481" for the ADV7481 - - "adi,adv7482" for the ADV7482 - - - reg: I2C slave addresses - The ADV748x has up to twelve 256-byte maps that can be accessed via the - main I2C ports. Each map has it own I2C address and acts as a standard - slave device on the I2C bus. The main address is mandatory, others are - optional and remain at default values if not specified. - -Optional Properties: - - - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or - "intrq3". All interrupts are optional. The "intrq3" interrupt - is only available on the adv7481 - - interrupts: Specify the interrupt lines for the ADV748x - - reg-names : Names of maps with programmable addresses. - It shall contain all maps needing a non-default address. - Possible map names are: - "main", "dpll", "cp", "hdmi", "edid", "repeater", - "infoframe", "cbus", "cec", "sdp", "txa", "txb" - -The device node must contain one 'port' child node per device input and output -port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes -are numbered as follows. - - Name Type Port - --------------------------------------- - AIN0 sink 0 - AIN1 sink 1 - AIN2 sink 2 - AIN3 sink 3 - AIN4 sink 4 - AIN5 sink 5 - AIN6 sink 6 - AIN7 sink 7 - HDMI sink 8 - TTL sink 9 - TXA source 10 - TXB source 11 - -The digital output port nodes, when present, shall contain at least one -endpoint. Each of those endpoints shall contain the data-lanes property as -described in video-interfaces.txt. - -Required source endpoint properties: - - data-lanes: an array of physical data lane indexes - The accepted value(s) for this property depends on which of the two - sources are described. For TXA 1, 2 or 4 data lanes can be described - while for TXB only 1 data lane is valid. See video-interfaces.txt - for detailed description. - -Ports are optional if they are not connected to anything at the hardware level. - -Example: - - video-receiver@70 { - compatible = "adi,adv7482"; - reg = <0x70 0x71 0x72 0x73 0x74 0x75 - 0x60 0x61 0x62 0x63 0x64 0x65>; - reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", - "infoframe", "cbus", "cec", "sdp", "txa", "txb"; - - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&gpio6>; - interrupt-names = "intrq1", "intrq2"; - interrupts = <30 IRQ_TYPE_LEVEL_LOW>, - <31 IRQ_TYPE_LEVEL_LOW>; - - port@7 { - reg = <7>; - - adv7482_ain7: endpoint { - remote-endpoint = <&cvbs_in>; - }; - }; - - port@8 { - reg = <8>; - - adv7482_hdmi: endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - - port@a { - reg = <10>; - - adv7482_txa: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi40_in>; - }; - }; - - port@b { - reg = <11>; - - adv7482_txb: endpoint { - clock-lanes = <0>; - data-lanes = <1>; - remote-endpoint = <&csi20_in>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.yaml b/Documentation/devicetree/bindings/media/i2c/adv748x.yaml new file mode 100644 index 000000000000..d6353081402b --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.yaml @@ -0,0 +1,212 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/adv748x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV748X video decoder with HDMI receiver + +maintainers: + - Kieran Bingham <kieran.bingham@ideasonboard.com> + - Niklas Söderlund <niklas.soderlund@ragnatech.se> + +description: + The ADV7481 and ADV7482 are multi format video decoders with an integrated + HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB + from three input sources HDMI, analog and TTL. + +properties: + compatible: + items: + - enum: + - adi,adv7481 + - adi,adv7482 + + reg: + minItems: 1 + maxItems: 12 + description: + The ADV748x has up to twelve 256-byte maps that can be accessed via the + main I2C ports. Each map has it own I2C address and acts as a standard + slave device on the I2C bus. The main address is mandatory, others are + optional and remain at default values if not specified. + + reg-names: + minItems: 1 + items: + - const: main + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ] + + interrupts: true + + interrupt-names: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + "^port@[0-7]$": + $ref: /schemas/graph.yaml#/properties/port + description: Input port nodes for analog inputs AIN[0-7]. + + properties: + port@8: + $ref: /schemas/graph.yaml#/properties/port + description: Input port node for HDMI. + + port@9: + $ref: /schemas/graph.yaml#/properties/port + description: Input port node for TTL. + + port@a: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter TXA. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@b: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter TXB. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + maxItems: 1 + + required: + - clock-lanes + - data-lanes + +allOf: + - if: + properties: + compatible: + contains: + const: adi,adv7481 + then: + properties: + interrupts: + minItems: 1 + maxItems: 3 + + interrupt-names: + minItems: 1 + maxItems: 3 + items: + enum: [ intrq1, intrq2, intrq3 ] + else: + properties: + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: [ intrq1, intrq2 ] + +additionalProperties: false + +required: + - compatible + - reg + - ports + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70 0x71 0x72 0x73 0x74 0x75 + 0x60 0x61 0x62 0x63 0x64 0x65>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb"; + + interrupt-parent = <&gpio6>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "intrq1", "intrq2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_in>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + + port@a { + reg = <10>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + + port@b { + reg = <11>; + + adv7482_txb: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&csi20_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt deleted file mode 100644 index b3e688b77a38..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt +++ /dev/null @@ -1,88 +0,0 @@ -* Analog Devices ADV7604/11/12 video decoder with HDMI receiver - -The ADV7604 and ADV7611/12 are multiformat video decoders with an integrated -HDMI receiver. The ADV7604 has four multiplexed HDMI inputs and one analog -input, and the ADV7611 has one HDMI input and no analog input. The 7612 is -similar to the 7611 but has 2 HDMI inputs. - -These device tree bindings support the ADV7611/12 only at the moment. - -Required Properties: - - - compatible: Must contain one of the following - - "adi,adv7611" for the ADV7611 - - "adi,adv7612" for the ADV7612 - - - reg: I2C slave addresses - The ADV76xx has up to thirteen 256-byte maps that can be accessed via the - main I2C ports. Each map has it own I2C address and acts as a standard - slave device on the I2C bus. The main address is mandatory, others are - optional and revert to defaults if not specified. - - - hpd-gpios: References to the GPIOs that control the HDMI hot-plug - detection pins, one per HDMI input. The active flag indicates the GPIO - level that enables hot-plug detection. - -The device node must contain one 'port' child node per device input and output -port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes -are numbered as follows. - - Port ADV7611 ADV7612 ------------------------------------------------------------- - HDMI 0 0, 1 - Digital output 1 2 - -The digital output port node must contain at least one endpoint. - -Optional Properties: - - - reset-gpios: Reference to the GPIO connected to the device's reset pin. - - default-input: Select which input is selected after reset. - - reg-names : Names of maps with programmable addresses. - It can contain any map needing a non-default address. - Possible maps names are : - "main", "avlink", "cec", "infoframe", "esdp", "dpp", "afe", - "rep", "edid", "hdmi", "test", "cp", "vdp" - -Optional Endpoint Properties: - - The following three properties are defined in video-interfaces.txt and are - valid for source endpoints only. - - - hsync-active: Horizontal synchronization polarity. Defaults to active low. - - vsync-active: Vertical synchronization polarity. Defaults to active low. - - pclk-sample: Pixel clock polarity. Defaults to output on the falling edge. - - If none of hsync-active, vsync-active and pclk-sample is specified the - endpoint will use embedded BT.656 synchronization. - -Example: - - hdmi_receiver@4c { - compatible = "adi,adv7611"; - /* - * The edid page will be accessible @ 0x66 on the I2C bus. All - * other maps will retain their default addresses. - */ - reg = <0x4c>, <0x66>; - reg-names = "main", "edid"; - - reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>; - hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>; - - #address-cells = <1>; - #size-cells = <0>; - - default-input = <0>; - - port@0 { - reg = <0>; - }; - port@1 { - reg = <1>; - hdmi_in: endpoint { - remote-endpoint = <&ccdc_in>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml new file mode 100644 index 000000000000..7589d377c686 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/adv7604.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV7604/10/11/12 video decoder with HDMI receiver + +maintainers: + - Hans Verkuil <hverkuil-cisco@xs4all.nl> + +description: + The ADV7604 and ADV7610/11/12 are multiformat video decoders with + an integrated HDMI receiver. The ADV7604 has four multiplexed HDMI inputs + and one analog input, and the ADV7610/11 have one HDMI input and no analog + input. The ADV7612 is similar to the ADV7610/11 but has 2 HDMI inputs. + + These device tree bindings support the ADV7610/11/12 only at the moment. + +properties: + compatible: + items: + - enum: + - adi,adv7610 + - adi,adv7611 + - adi,adv7612 + + reg: + minItems: 1 + maxItems: 13 + + reg-names: + minItems: 1 + items: + - const: main + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + hpd-gpios: + minItems: 1 + description: + References to the GPIOs that control the HDMI hot-plug detection pins, + one per HDMI input. The active flag indicates the GPIO level that + enables hot-plug detection. + + default-input: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Select which input is selected after reset. + + ports: true + +required: + - compatible + - reg + - ports + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: adi,adv7611 + then: + properties: + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output port + + required: + - port@1 + + - if: + properties: + compatible: + contains: + const: adi,adv7612 + then: + properties: + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Output port + + patternProperties: + "^port@[0-1]$": + $ref: /schemas/graph.yaml#/properties/port + description: Input port + + required: + - port@2 + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_receiver@4c { + compatible = "adi,adv7611"; + /* + * The edid page will be accessible @ 0x66 on the I2C bus. All + * other maps will retain their default addresses. + */ + reg = <0x4c>, <0x66>; + reg-names = "main", "edid"; + + reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>; + hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + hdmi_in: endpoint { + remote-endpoint = <&ccdc_in>; + }; + }; + }; + + + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/ak7375.txt b/Documentation/devicetree/bindings/media/i2c/ak7375.txt deleted file mode 100644 index aa3e24b41241..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ak7375.txt +++ /dev/null @@ -1,8 +0,0 @@ -Asahi Kasei Microdevices AK7375 voice coil lens driver - -AK7375 is a camera voice coil lens. - -Mandatory properties: - -- compatible: "asahi-kasei,ak7375" -- reg: I2C slave address diff --git a/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml b/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml new file mode 100644 index 000000000000..d3329e991d16 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/alliedvision,alvium-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allied Vision Alvium Camera + +maintainers: + - Tommaso Merciai <tomm.merciai@gmail.com> + - Martin Hecht <martin.hecht@avnet.eu> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: alliedvision,alvium-csi2 + + reg: + maxItems: 1 + + vcc-ext-in-supply: + description: | + The regulator that supplies power to the VCC_EXT_IN pins. + + port: + description: Digital Output Port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + link-frequencies: true + + data-lanes: + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - vcc-ext-in-supply + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + alvium: camera@3c { + compatible = "alliedvision,alvium-csi2"; + reg = <0x3c>; + vcc-ext-in-supply = <®_vcc_ext_in>; + + port { + alvium_out: endpoint { + remote-endpoint = <&mipi_csi_0_in>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <681250000>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml new file mode 100644 index 000000000000..be00de2f2d58 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/aptina,mt9p031.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: | + The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor + with an active array size of 2592H x 1944V. It is programmable through a + simple two-wire serial interface. + +properties: + compatible: + enum: + - aptina,mt9p006 + - aptina,mt9p031 + - aptina,mt9p031m + + reg: + description: I2C device address + maxItems: 1 + + clocks: + maxItems: 1 + + vdd-supply: + description: Digital supply voltage, 1.8 V + + vdd_io-supply: + description: I/O supply voltage, 1.8 or 2.8 V + + vaa-supply: + description: Analog supply voltage, 2.8 V + + reset-gpios: + maxItems: 1 + description: Chip reset GPIO + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + input-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 6000000 + maximum: 96000000 + description: Input clock frequency + + pixel-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 96000000 + description: Target pixel clock frequency + + pclk-sample: + default: 0 + + required: + - input-clock-frequency + - pixel-clock-frequency + +required: + - compatible + - reg + - clocks + - vdd-supply + - vdd_io-supply + - vaa-supply + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + mt9p031@5d { + compatible = "aptina,mt9p031"; + reg = <0x5d>; + reset-gpios = <&gpio_sensor 0 0>; + + clocks = <&sensor_clk>; + + vdd-supply = <®_vdd>; + vdd_io-supply = <®_vdd_io>; + vaa-supply = <®_vaa>; + + port { + mt9p031_1: endpoint { + input-clock-frequency = <6000000>; + pixel-clock-frequency = <96000000>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt deleted file mode 100644 index bd896e9f67d1..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt +++ /dev/null @@ -1,46 +0,0 @@ -* Aptina MT9V111 CMOS sensor ----------------------------- - -The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core -based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP). - -The sensor has an active pixel array of 640x480 pixels and can output a number -of image resolution and formats controllable through a simple two-wires -interface. - -Required properties: --------------------- - -- compatible: shall be "aptina,mt9v111". -- clocks: reference to the system clock input provider. - -Optional properties: --------------------- - -- enable-gpios: output enable signal, pin name "OE#". Active low. -- standby-gpios: low power state control signal, pin name "STANDBY". - Active high. -- reset-gpios: chip reset signal, pin name "RESET#". Active low. - -The device node must contain one 'port' child node with one 'endpoint' child -sub-node for its digital output video port, in accordance with the video -interface bindings defined in: -Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: --------- - - &i2c1 { - camera@48 { - compatible = "aptina,mt9v111"; - reg = <0x48>; - - clocks = <&camera_clk>; - - port { - mt9v111_out: endpoint { - remote-endpoint = <&ceu_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml new file mode 100644 index 000000000000..088022f88010 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aptina MT9V111 CMOS sensor + +maintainers: + - Jacopo Mondi <jacopo@jmondi.org> + +description: | + The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core + based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP). + + The sensor has an active pixel array of 640x480 pixels and can output a number + of image resolutions and formats controllable through a simple two-wires + interface. + +properties: + compatible: + const: aptina,mt9v111 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + enable-gpios: + description: Enable signal, pin name "OE#". Active low. + maxItems: 1 + + standby-gpios: + description: | + Low power state control signal, pin name "STANDBY". Active high. + maxItems: 1 + + reset-gpios: + description: Chip reset signal, pin name "RESET#". Active low. + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: | + Output video port. + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + clocks = <&camera_clk>; + + port { + mt9v111_out: endpoint { + remote-endpoint = <&ceu_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml b/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml new file mode 100644 index 000000000000..fe312cc6a873 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/asahi-kasei,ak7375.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Asahi Kasei Microdevices AK7375 voice coil lens actuator + +maintainers: + - Tianshu Qiu <tian.shu.qiu@intel.com> + +description: + AK7375 is a voice coil motor (VCM) camera lens actuator that + is controlled over I2C. + +properties: + compatible: + enum: + - asahi-kasei,ak7345 + - asahi-kasei,ak7375 + + reg: + maxItems: 1 + + vdd-supply: + description: VDD supply + + vio-supply: + description: I/O pull-up supply + +required: + - compatible + - reg + - vdd-supply + - vio-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ak7375: camera-lens@c { + compatible = "asahi-kasei,ak7375"; + reg = <0x0c>; + + vdd-supply = <&vreg_l23a_2p8>; + vio-supply = <&vreg_lvs1a_1p8>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml new file mode 100644 index 000000000000..4e69b6a7ffcc --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chrontel HDMI-CEC Controller + +maintainers: + - Jeff Chase <jnchase@google.com> + +description: + The Chrontel CH7322 is a discrete HDMI-CEC controller. It is + programmable through I2C and drives a single CEC line. + +allOf: + - $ref: /schemas/media/cec/cec-common.yaml# + +properties: + compatible: + const: chrontel,ch7322 + + reg: + description: I2C device address + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + Reference to the GPIO connected to the RESET pin, if any. This + pin is active-low. + maxItems: 1 + + standby-gpios: + description: + Reference to the GPIO connected to the OE pin, if any. When low + the device will respond to power status requests with "standby" + if in auto mode. + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + cec@75 { + compatible = "chrontel,ch7322"; + reg = <0x75>; + interrupts = <47 IRQ_TYPE_EDGE_RISING>; + standby-gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + hdmi-phandle = <&hdmi>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt deleted file mode 100644 index b88dcdd41def..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt +++ /dev/null @@ -1,9 +0,0 @@ -Dongwoon Anatech DW9714 camera voice coil lens driver - -DW9174 is a 10-bit DAC with current sink capability. It is intended -for driving voice coil lenses in camera modules. - -Mandatory properties: - -- compatible: "dongwoon,dw9714" -- reg: I²C slave address diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml new file mode 100644 index 000000000000..66229a3dc05d --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9714.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dongwoon Anatech DW9714 camera voice coil lens driver + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: + DW9174 is a 10-bit DAC with current sink capability. It is intended for + driving voice coil lenses in camera modules. + +properties: + compatible: + const: dongwoon,dw9714 + + reg: + maxItems: 1 + + powerdown-gpios: + description: + XSD pin for shutdown (active low) + + vcc-supply: + description: VDD power supply + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera-lens@c { + compatible = "dongwoon,dw9714"; + reg = <0x0c>; + vcc-supply = <®_csi_1v8>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml new file mode 100644 index 000000000000..a0855d3b7577 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9768.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dongwoon Anatech DW9768 Voice Coil Motor (VCM) Lens + +maintainers: + - Dongchun Zhu <dongchun.zhu@mediatek.com> + +description: |- + The Dongwoon DW9768 is a single 10-bit digital-to-analog (DAC) converter + with 100 mA output current sink capability. VCM current is controlled with + a linear mode driver. The DAC is controlled via a 2-wire (I2C-compatible) + serial interface that operates at clock rates up to 1MHz. This chip + integrates Advanced Actuator Control (AAC) technology and is intended for + driving voice coil lenses in camera modules. + +properties: + compatible: + enum: + - dongwoon,dw9768 # for DW9768 VCM + - giantec,gt9769 # for GT9769 VCM + + reg: + maxItems: 1 + + vin-supply: + description: + Definition of the regulator used as Digital I/O voltage supply. + + vdd-supply: + description: + Definition of the regulator used as Digital core voltage supply. + + dongwoon,aac-mode: + description: + Indication of AAC mode select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 1 # AAC2 mode(operation time# 0.48 x Tvib) + - 2 # AAC3 mode(operation time# 0.70 x Tvib) + - 3 # AAC4 mode(operation time# 0.75 x Tvib) + - 5 # AAC8 mode(operation time# 1.13 x Tvib) + default: 2 + + dongwoon,aac-timing: + description: + Number of AAC Timing count that controlled by one 6-bit period of + vibration register AACT[5:0], the unit of which is 100 us. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x20 + minimum: 0x00 + maximum: 0x3f + + dongwoon,clock-presc: + description: + Indication of VCM internal clock dividing rate select, as one multiple + factor to calculate VCM ring periodic time Tvib. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # Dividing Rate - 2 + - 1 # Dividing Rate - 1 + - 2 # Dividing Rate - 1/2 + - 3 # Dividing Rate - 1/4 + - 4 # Dividing Rate - 8 + - 5 # Dividing Rate - 4 + default: 1 + +required: + - compatible + - reg + - vin-supply + - vdd-supply + +additionalProperties: false + +examples: + - | + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dw9768: camera-lens@c { + compatible = "dongwoon,dw9768"; + reg = <0x0c>; + + vin-supply = <&mt6358_vcamio_reg>; + vdd-supply = <&mt6358_vcama2_reg>; + dongwoon,aac-timing = <0x39>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt deleted file mode 100644 index c4701f1eaaf6..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt +++ /dev/null @@ -1,9 +0,0 @@ -Dongwoon Anatech DW9807 voice coil lens driver - -DW9807 is a 10-bit DAC with current sink capability. It is intended for -controlling voice coil lenses. - -Mandatory properties: - -- compatible: "dongwoon,dw9807-vcm" -- reg: I2C slave address diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml new file mode 100644 index 000000000000..aae246ca3fcf --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2018, 2021 Intel Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9807-vcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dongwoon Anatech DW9807 voice coil lens driver + +maintainers: + - Sakari Ailus <sakari.ailus@linux.intel.com> + +description: | + DW9807 is a 10-bit DAC with current sink capability. It is intended for + controlling voice coil lenses. + +properties: + compatible: + const: dongwoon,dw9807-vcm + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + lens@e { + compatible = "dongwoon,dw9807-vcm"; + reg = <0x0e>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml new file mode 100644 index 000000000000..f81e7daed67b --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc0308.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Galaxycore GC0308 and GC0309 Image Sensors + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + The GalaxyCore GC0308 (1/6.5") and GC0309 (1/9") are 640x480 VGA sensors + programmable through an I2C interface and connected via parallel bus. + They include an ISP capable of auto exposure and auto white balance. + +allOf: + - $ref: ../video-interface-devices.yaml# + +properties: + compatible: + oneOf: + - const: galaxycore,gc0308 + - items: + - const: galaxycore,gc0309 + - const: galaxycore,gc0308 + + reg: + const: 0x21 + + clocks: + description: Reference to the xclk clock. + maxItems: 1 + + reset-gpios: + description: GPIO descriptor for the reset pin. + maxItems: 1 + + powerdown-gpios: + description: GPIO descriptor for the powerdown pin. + maxItems: 1 + + vdd28-supply: + description: 2.8V supply + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Video output port. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-width: true + data-shift: true + hsync-active: true + vsync-active: true + data-active: true + pclk-sample: true + + required: + - bus-width + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - powerdown-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera-sensor@21 { + compatible = "galaxycore,gc0308"; + reg = <0x21>; + clocks = <&camera_clk>; + powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + vdd28-supply = <&vdd28>; + + port { + gc0308_ep: endpoint { + remote-endpoint = <¶llel_from_gc0308>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <1>; /* active high */ + vsync-active = <1>; /* active high */ + data-active = <1>; /* active high */ + pclk-sample = <1>; /* sample on rising edge */ + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml new file mode 100644 index 000000000000..1726ecca4c77 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Galaxy Core 1/5'' UXGA CMOS Image Sensor + +maintainers: + - Alain Volmat <alain.volmat@foss.st.com> + +description: + The Galaxy Core GC2145 is a 2 Megapixel CMOS image sensor, for mobile + phone camera applications and digital camera products. GC2145 incorporates a + 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal + processor allowing AE/AWB/interpolation/de-noise/color-conversion and + gamma correction. Bayer RGB, RGB565 and YCbCr 4:2:2 can be provided by the + sensor. It is programmable through an I2C interface. Image data is sent + either through a parallel interface or through MIPI CSI-2. + +allOf: + - $ref: ../video-interface-devices.yaml# + +properties: + compatible: + const: galaxycore,gc2145 + + reg: + const: 0x3c + + clocks: + maxItems: 1 + + powerdown-gpios: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + iovdd-supply: + description: Power Supply for I/O circuits (1.7 - 3V). + + avdd-supply: + description: Power for analog circuit/sensor array (2.7 - 3V). + + dvdd-supply: + description: Power for digital core (1.7 - 1.9V). + + orientation: true + + rotation: true + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + link-frequencies: true + + required: + - link-frequencies + + required: + - endpoint + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - powerdown-gpios + - reset-gpios + - iovdd-supply + - avdd-supply + - dvdd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "galaxycore,gc2145"; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + iovdd-supply = <&scmi_v3v3_sw>; + avdd-supply = <&scmi_v3v3_sw>; + dvdd-supply = <&scmi_v3v3_sw>; + powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + + port { + endpoint { + remote-endpoint = <&mipid02_0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <120000000 192000000 240000000>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml new file mode 100644 index 000000000000..60f19e1152b3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor + +maintainers: + - Martin Kepplinger <martin.kepplinger@puri.sm> + +description: |- + The Hi-846 is a raw image sensor with an MIPI CSI-2 image data + interface and CCI (I2C compatible) control bus. The output format + is raw Bayer. + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: hynix,hi846 + + reg: + maxItems: 1 + + clocks: + items: + - description: Reference to the mclk clock. + + assigned-clocks: + maxItems: 1 + + assigned-clock-rates: + maxItems: 1 + + reset-gpios: + description: Reference to the GPIO connected to the RESETB pin. Active low. + maxItems: 1 + + shutdown-gpios: + description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low. + maxItems: 1 + + vddio-supply: + description: Definition of the regulator used for the VDDIO power supply. + + vdda-supply: + description: Definition of the regulator used for the VDDA power supply. + + vddd-supply: + description: Definition of the regulator used for the VDDD power supply. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + - items: + - const: 1 + - const: 2 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - assigned-clocks + - assigned-clock-rates + - vddio-supply + - vdda-supply + - vddd-supply + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hi846: camera@20 { + compatible = "hynix,hi846"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_csi1>; + clocks = <&clk 0>; + assigned-clocks = <&clk 0>; + assigned-clock-rates = <25000000>; + vdda-supply = <®_camera_vdda>; + vddd-supply = <®_camera_vddd>; + vddio-supply = <®_camera_vddio>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; + orientation = <0>; + rotation = <0>; + + port { + camera_out: endpoint { + remote-endpoint = <&csi1_ep1>; + link-frequencies = /bits/ 64 + <80000000 200000000>; + data-lanes = <1 2>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml new file mode 100644 index 000000000000..e57575c44930 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +# Copyright (C) 2019 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/imi,rdacm2x-gmsl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms + +maintainers: + - Jacopo Mondi <jacopo+renesas@jmondi.org> + - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> + +description: -| + The IMI D&D RDACM20 and RDACM21 are GMSL-compatible camera designed for + automotive applications. + + The RDACM20 camera module encloses a Maxim Integrated MAX9271 GMSL serializer, + coupled with an OV10635 image sensor and an embedded MCU. Both the MCU and + the image sensor are connected to the serializer local I2C bus and are + accessible by the host SoC by direct addressing. + + The RDACM21 camera module encloses the same serializer, coupled with an + OV10640 image sensor and an OV490 ISP. Only the OV490 ISP is interfaced to + the serializer local I2C bus while the image sensor is not accessible from + the host SoC. + + They both connect to a remote GMSL endpoint through a coaxial cable. + + IMI RDACM20 + +---------------+ +--------------------------------+ + | GMSL | <- Video Stream | <- Video--------\ | + | |< === GMSL Link ====== >|MAX9271<- I2C bus-> <-->OV10635 | + | de-serializer | <- I2C messages -> | \<-->MCU | + +---------------+ +--------------------------------+ + + IMI RDACM21 + +---------------+ +--------------------------------+ + | GMSL | <- Video Stream | <- Video--------\ | + | |< === GMSL Link ====== >|MAX9271<- I2C bus-> <-->OV490 | + | | <- I2C messages -> | | | + | de-serializer | | OV10640 <-------| | + +---------------+ +--------------------------------+ + + Both camera modules serialize video data generated by the embedded camera + sensor on the GMSL serial channel to a remote GMSL de-serializer. They also + receive and transmit I2C messages encapsulated and transmitted on the GMSL + bidirectional control channel. + + All I2C traffic received on the GMSL link not directed to the serializer is + propagated on the local I2C bus to the remote device there connected. All the + I2C traffic generated on the local I2C bus not directed to the serializer is + propagated to the remote de-serializer encapsulated in the GMSL control + channel. + + The RDACM20 and RDACM21 DT node should be a direct child of the GMSL + deserializer's I2C bus corresponding to the GMSL link that the camera is + attached to. + +properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + compatible: + enum: + - imi,rdacm20 + - imi,rdacm21 + + reg: + description: -| + I2C device addresses, the first to be assigned to the serializer, the + following ones to be assigned to the remote devices. + + For RDACM20 the second entry of the property is assigned to the + OV10635 image sensor and the optional third one to the embedded MCU. + + For RDACM21 the second entry is assigned to the OV490 ISP and the optional + third one ignored. + + minItems: 2 + maxItems: 3 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Connection to the remote GMSL endpoint. + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - | + i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe66d8000>; + + camera@31 { + compatible = "imi,rdacm20"; + reg = <0x31>, <0x41>, <0x51>; + + port { + rdacm20_out0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; + }; + }; + + - | + i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe66d8000>; + + camera@31 { + compatible = "imi,rdacm21"; + reg = <0x31>, <0x41>; + + port { + rdacm21_out0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml index 32d6b693274f..07d088cf66e0 100644 --- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml +++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml @@ -40,16 +40,20 @@ properties: Digital core voltage supply, 1.2 volts reset-gpios: + maxItems: 1 description: |- Reference to the GPIO connected to the xclr pin, if any. Must be released (set high) after all supplies are applied. - # See ../video-interfaces.txt for more details port: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + properties: endpoint: - type: object + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: data-lanes: description: |- @@ -60,17 +64,8 @@ properties: - const: 1 - const: 2 - clock-noncontinuous: - type: boolean - description: |- - MIPI CSI-2 clock is non-continuous if this property is present, - otherwise it's continuous. - - link-frequencies: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-array - description: - Allowed data bus frequencies. + clock-noncontinuous: true + link-frequencies: true required: - link-frequencies @@ -88,7 +83,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/imx258.yaml b/Documentation/devicetree/bindings/media/i2c/imx258.yaml new file mode 100644 index 000000000000..80d24220baa0 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/imx258.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/imx258.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX258 13 Mpixel CMOS Digital Image Sensor + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: |- + IMX258 is a diagonal 5.867mm (Type 1/3.06) 13 Mega-pixel CMOS active pixel + type stacked image sensor with a square pixel array of size 4208 x 3120. It + is programmable through I2C interface. Image data is sent through MIPI + CSI-2. + +properties: + compatible: + const: sony,imx258 + + assigned-clocks: true + assigned-clock-parents: true + assigned-clock-rates: true + + clocks: + description: + Clock frequency from 6 to 27 MHz. + maxItems: 1 + + reg: + maxItems: 1 + + reset-gpios: + description: |- + Reference to the GPIO connected to the XCLR pin, if any. + + vana-supply: + description: + Analog voltage (VANA) supply, 2.7 V + + vdig-supply: + description: + Digital I/O voltage (VDIG) supply, 1.2 V + + vif-supply: + description: + Interface voltage (VIF) supply, 1.8 V + + # See ../video-interfaces.txt for more details + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + - items: + - const: 1 + - const: 2 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@6c { + compatible = "sony,imx258"; + reg = <0x6c>; + clocks = <&imx258_clk>; + + port { + endpoint { + remote-endpoint = <&csi1_ep>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <320000000>; + }; + }; + }; + }; + + /* Oscillator on the camera board */ + imx258_clk: clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@6c { + compatible = "sony,imx258"; + reg = <0x6c>; + clocks = <&imx258_clk>; + + assigned-clocks = <&imx258_clk>; + assigned-clock-rates = <19200000>; + + port { + endpoint { + remote-endpoint = <&csi1_ep>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <633600000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt deleted file mode 100644 index 80f2e89568e1..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/imx274.txt +++ /dev/null @@ -1,33 +0,0 @@ -* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor - -The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with -an active array size of 3864H x 2202V. It is programmable through I2C -interface. The I2C address is fixed to 0x1a as per sensor data sheet. -Image data is sent through MIPI CSI-2, which is configured as 4 lanes -at 1440 Mbps. - - -Required Properties: -- compatible: value should be "sony,imx274" for imx274 sensor -- reg: I2C bus address of the device - -Optional Properties: -- reset-gpios: Sensor reset GPIO - -The imx274 device node should contain one 'port' child node with -an 'endpoint' subnode. For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - sensor@1a { - compatible = "sony,imx274"; - reg = <0x1a>; - #address-cells = <1>; - #size-cells = <0>; - reset-gpios = <&gpio_sensor 0 0>; - port { - sensor_out: endpoint { - remote-endpoint = <&csiss_in>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/imx290.txt b/Documentation/devicetree/bindings/media/i2c/imx290.txt deleted file mode 100644 index a3cc21410f7c..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/imx290.txt +++ /dev/null @@ -1,57 +0,0 @@ -* Sony IMX290 1/2.8-Inch CMOS Image Sensor - -The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with -Square Pixel for Color Cameras. It is programmable through I2C and 4-wire -interfaces. The sensor output is available via CMOS logic parallel SDR output, -Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the -default. No bindings have been defined for the other busses. - -Required Properties: -- compatible: Should be "sony,imx290" -- reg: I2C bus address of the device -- clocks: Reference to the xclk clock. -- clock-names: Should be "xclk". -- clock-frequency: Frequency of the xclk clock in Hz. -- vdddo-supply: Sensor digital IO regulator. -- vdda-supply: Sensor analog regulator. -- vddd-supply: Sensor digital core regulator. - -Optional Properties: -- reset-gpios: Sensor reset GPIO - -The imx290 device node should contain one 'port' child node with -an 'endpoint' subnode. For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Required Properties on endpoint: -- data-lanes: check ../video-interfaces.txt -- link-frequencies: check ../video-interfaces.txt -- remote-endpoint: check ../video-interfaces.txt - -Example: - &i2c1 { - ... - imx290: camera-sensor@1a { - compatible = "sony,imx290"; - reg = <0x1a>; - - reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&camera_rear_default>; - - clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; - clock-names = "xclk"; - clock-frequency = <37125000>; - - vdddo-supply = <&camera_vdddo_1v8>; - vdda-supply = <&camera_vdda_2v8>; - vddd-supply = <&camera_vddd_1v5>; - - port { - imx290_ep: endpoint { - data-lanes = <1 2 3 4>; - link-frequencies = /bits/ 64 <445500000>; - remote-endpoint = <&csiphy0_ep>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml new file mode 100644 index 000000000000..034a6e3466af --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/isil,isl79987.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intersil ISL79987 Analog to MIPI CSI-2 decoder + +maintainers: + - Michael Tretter <m.tretter@pengutronix.de> + - Marek Vasut <marex@denx.de> + +description: + The Intersil ISL79987 is an analog to MIPI CSI-2 decoder which is capable of + receiving up to four analog stream and multiplexing them into up to four MIPI + CSI-2 virtual channels, using one MIPI clock lane and 1/2 data lanes. + +properties: + compatible: + enum: + - isil,isl79987 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: + A GPIO spec for the RSTB pin (active high) + + powerdown-gpios: + maxItems: 1 + description: + A GPIO spec for the Power Down pin (active high) + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 2 + + required: + - data-lanes + + patternProperties: + "^port@[1-4]$": + $ref: /schemas/graph.yaml#/properties/port + description: Input ports + + required: + - port@0 + +additionalProperties: false + +required: + - compatible + - reg + - ports + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + isl7998x_mipi@44 { + compatible = "isil,isl79987"; + reg = <0x44>; + powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + isl79987_out: endpoint { + remote-endpoint = <&mipi_csi2_in>; + data-lanes = <1 2>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&camera_0>; + }; + }; + + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&camera_1>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml new file mode 100644 index 000000000000..a37447256f8d --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -0,0 +1,416 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/maxim,max9286.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated Quad GMSL Deserializer + +maintainers: + - Jacopo Mondi <jacopo+renesas@jmondi.org> + - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> + +description: | + The MAX9286 deserializer receives video data on up to 4 Gigabit Multimedia + Serial Links (GMSL) and outputs them on a CSI-2 D-PHY port using up to 4 data + lanes. + + In addition to video data, the GMSL links carry a bidirectional control + channel that encapsulates I2C messages. The MAX9286 forwards all I2C traffic + not addressed to itself to the other side of the links, where a GMSL + serializer will output it on a local I2C bus. In the other direction all I2C + traffic received over GMSL by the MAX9286 is output on the local I2C bus. + +properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + compatible: + const: maxim,max9286 + + reg: + description: I2C device address + maxItems: 1 + + poc-supply: + description: Regulator providing Power over Coax to all the ports + + enable-gpios: + description: GPIO connected to the \#PWDN pin with inverted polarity + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + maxim,bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 24, 27, 32 ] + description: | + The GMSL serial data bus width. This setting is normally controlled by + the BWS pin, but may be overridden with this property. The value must + match the configuration of the remote serializers. + + maxim,i2c-remote-bus-hz: + enum: [ 8470, 28300, 84700, 105000, 173000, 339000, 533000, 837000 ] + default: 105000 + description: | + The I2C clock frequency for the remote I2C buses. The value must match + the configuration of the remote serializers. + + maxim,reverse-channel-microvolt: + minimum: 30000 + maximum: 200000 + default: 170000 + description: | + Initial amplitude of the reverse control channel, in micro volts. + + The initial amplitude shall be adjusted to a value compatible with the + configuration of the connected remote serializer. + + Some camera modules (for example RDACM20) include an on-board MCU that + pre-programs the embedded serializer with power supply noise immunity + (high-threshold) enabled. A typical value of the deserializer's reverse + channel amplitude to communicate with pre-programmed serializers is + 170000 micro volts. + + A typical value for the reverse channel amplitude to communicate with + a remote serializer whose high-threshold noise immunity is not enabled + is 100000 micro volts + + maxim,gpio-poc: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + description: | + Index of the MAX9286 gpio output line (0 or 1) that controls Power over + Coax to the cameras and its associated polarity flag. + + The property accepts an array of two unsigned integers, the first being + the gpio line index (0 or 1) and the second being the gpio line polarity + flag (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW) as defined in + <include/dt-bindings/gpio/gpio.h>. + + When the remote cameras power is controlled by one of the MAX9286 gpio + lines, this property has to be used to specify which line among the two + available ones controls the remote camera power enablement. + + When this property is used it is not possible to register a gpio + controller as the gpio lines are controlled directly by the MAX9286 and + not available for consumers, nor the 'poc-supply' property should be + specified. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: GMSL Input 0 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: GMSL Input 1 + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: GMSL Input 2 + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: GMSL Input 3 + + port@4: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 Output + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + + required: + - data-lanes + + required: + - port@4 + + i2c-mux: + type: object + $ref: /schemas/i2c/i2c-mux.yaml# + unevaluatedProperties: false + description: | + Each GMSL link is modelled as a child bus of an i2c bus multiplexer/switch. + + patternProperties: + "^i2c@[0-3]$": + type: object + additionalProperties: false + description: | + Child node of the i2c bus multiplexer which represents a GMSL link. + Each serializer device on the GMSL link remote end is represented with + an i2c-mux child node. The MAX9286 chip supports up to 4 GMSL + channels. + + properties: + reg: + description: The index of the GMSL channel. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + "^camera@[a-f0-9]+$": + type: object + description: | + The remote camera device, composed by a GMSL serializer and a + connected video source. + + properties: + compatible: + description: The remote device compatible string. + + reg: + minItems: 2 + maxItems: 3 + description: | + The I2C addresses to be assigned to the remote devices through + address reprogramming. The number of entries depends on the + requirements of the currently connected remote device. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Connection to the MAX9286 sink. + + required: + - compatible + - reg + - port + + additionalProperties: false + +patternProperties: + "^port[0-3]-poc-supply$": + description: Regulator providing Power over Coax for a particular port + +required: + - compatible + - reg + - ports + - i2c-mux + +allOf: + # Only one way of specifying power supplies is allowed: 'maxim,gpio-poc', + # 'poc-supply' or per-port poc-supply. Additionally, if 'maxim,gpio-poc' is + # present, then 'gpio-controller' isn't allowed. + - if: + required: + - maxim,gpio-poc + then: + properties: + poc-supply: false + gpio-controller: false + patternProperties: + "^port[0-3]-poc-supply$": false + + - if: + required: + - poc-supply + then: + patternProperties: + "^port[0-3]-poc-supply$": false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe66d8000>; + + gmsl-deserializer@2c { + compatible = "maxim,max9286"; + reg = <0x2c>; + poc-supply = <&camera_poc_12v>; + enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + maxim,i2c-remote-bus-hz = <339000>; + maxim,reverse-channel-microvolt = <170000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + max9286_in0: endpoint { + remote-endpoint = <&rdacm20_out0>; + }; + }; + + port@1 { + reg = <1>; + + max9286_in1: endpoint { + remote-endpoint = <&rdacm20_out1>; + }; + }; + + port@2 { + reg = <2>; + + max9286_in2: endpoint { + remote-endpoint = <&rdacm20_out2>; + }; + }; + + port@3 { + reg = <3>; + + max9286_in3: endpoint { + remote-endpoint = <&rdacm20_out3>; + }; + }; + + port@4 { + reg = <4>; + + max9286_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + camera@51 { + compatible = "imi,rdacm20"; + reg = <0x51>, <0x61>; + + port { + rdacm20_out0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; + + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + camera@52 { + compatible = "imi,rdacm20"; + reg = <0x52>, <0x62>; + + port { + rdacm20_out1: endpoint { + remote-endpoint = <&max9286_in1>; + }; + }; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + camera@53 { + compatible = "imi,rdacm20"; + reg = <0x53>, <0x63>; + + port { + rdacm20_out2: endpoint { + remote-endpoint = <&max9286_in2>; + }; + }; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + camera@54 { + compatible = "imi,rdacm20"; + reg = <0x54>, <0x64>; + + port { + rdacm20_out3: endpoint { + remote-endpoint = <&max9286_in3>; + }; + }; + }; + }; + }; + }; + + /* + * Example of a deserializer that controls the camera Power over Coax + * through one of its gpio lines. + */ + gmsl-deserializer@6c { + compatible = "maxim,max9286"; + reg = <0x6c>; + enable-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + + /* + * The remote camera power is controlled by MAX9286 GPIO line #0. + * No 'poc-supply' nor 'gpio-controller' are specified. + */ + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + + /* + * Do not describe connections as they're the same as in the previous + * example. + */ + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml new file mode 100644 index 000000000000..6c72e77b927c --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/maxim,max96712.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Quad GMSL2 to CSI-2 Deserializer with GMSL1 Compatibility + +maintainers: + - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> + +description: | + The MAX96712 deserializer converts GMSL2 or GMSL1 serial inputs into MIPI + CSI-2 D-PHY or C-PHY formatted outputs. The device allows each link to + simultaneously transmit bidirectional control-channel data while forward + video transmissions are in progress. The MAX96712 can accommodate as many as + four remotely located sensors using industry-standard coax or STP + interconnects. + + Each GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the + forward direction and 187.5Mbps in the reverse direction. In GMSL1 mode, the + MAX96712 can be paired with first-generation 3.12Gbps or 1.5Gbps GMSL1 + serializers or operate up to 3.12Gbps with GMSL2 serializers in GMSL1 mode. + +properties: + compatible: + const: maxim,max96712 + + reg: + description: I2C device address + maxItems: 1 + + enable-gpios: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: GMSL Input 0 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: GMSL Input 1 + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: GMSL Input 2 + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: GMSL Input 3 + + port@4: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 Output + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + bus-type: + enum: + - 1 # MEDIA_BUS_TYPE_CSI2_CPHY + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY + + required: + - data-lanes + - bus-type + + required: + - port@4 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe6508000>; + + gmsl0: gmsl-deserializer@49 { + compatible = "maxim,max96712"; + reg = <0x49>; + enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96712_out0: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml new file mode 100644 index 000000000000..f8ace8cbccdb --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2014--2020 Intel Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/mipi-ccs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPI CCS, SMIA++ and SMIA compliant camera sensors + +maintainers: + - Sakari Ailus <sakari.ailus@linux.intel.com> + +description: + + CCS (Camera Command Set) is a raw Bayer camera sensor standard defined by the + MIPI Alliance; see + <URL:https://www.mipi.org/specifications/camera-command-set>. + + SMIA (Standard Mobile Imaging Architecture) is an image sensor standard + defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension of + that. + + More detailed documentation can be found in + Documentation/devicetree/bindings/media/video-interfaces.txt . + +properties: + compatible: + oneOf: + - items: + - const: mipi-ccs-1.1 + - const: mipi-ccs + - items: + - const: mipi-ccs-1.0 + - const: mipi-ccs + - const: nokia,smia + + reg: + maxItems: 1 + + vana-supply: + description: Analogue voltage supply (VANA), sensor dependent. + + vcore-supply: + description: Core voltage supply (VCore), sensor dependent. + + vio-supply: + description: I/O voltage supply (VIO), sensor dependent. + + clocks: + description: External clock to the sensor. + maxItems: 1 + + clock-frequency: + description: Frequency of the external clock to the sensor in Hz. + + reset-gpios: + description: Reset GPIO. Also commonly called XSHUTDOWN in hardware + documentation. + maxItems: 1 + + flash-leds: + description: Flash LED phandles. See ../video-interfaces.txt for details. + + lens-focus: + description: Lens focus controller phandles. See ../video-interfaces.txt + for details. + + rotation: + description: Rotation of the sensor. See ../video-interfaces.txt for + details. + enum: [ 0, 180 ] + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + link-frequencies: true + data-lanes: true + bus-type: + enum: + - 1 # CSI-2 C-PHY + - 3 # CCP2 + - 4 # CSI-2 D-PHY + + required: + - link-frequencies + - data-lanes + - bus-type + +required: + - compatible + - reg + - clock-frequency + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + clock-frequency = <400000>; + + camera-sensor@10 { + compatible = "mipi-ccs-1.0", "mipi-ccs"; + reg = <0x10>; + reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + vana-supply = <&vaux3>; + clocks = <&omap3_isp 0>; + clock-frequency = <9600000>; + port { + ccs_ep: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&csi2a_ep>; + link-frequencies = /bits/ 64 <199200000 210000000 + 499200000>; + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt deleted file mode 100644 index cb60443ff78f..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt +++ /dev/null @@ -1,40 +0,0 @@ -* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor - -The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with -an active array size of 2592H x 1944V. It is programmable through a simple -two-wire serial interface. - -Required Properties: -- compatible: value should be either one among the following - (a) "aptina,mt9p031" for mt9p031 sensor - (b) "aptina,mt9p031m" for mt9p031m sensor - -- input-clock-frequency: Input clock frequency. - -- pixel-clock-frequency: Pixel clock frequency. - -Optional Properties: -- reset-gpios: Chip reset GPIO - -For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - - i2c0@1c22000 { - ... - ... - mt9p031@5d { - compatible = "aptina,mt9p031"; - reg = <0x5d>; - reset-gpios = <&gpio3 30 0>; - - port { - mt9p031_1: endpoint { - input-clock-frequency = <6000000>; - pixel-clock-frequency = <96000000>; - }; - }; - }; - ... - }; diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt deleted file mode 100644 index 10ece8108081..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt +++ /dev/null @@ -1,66 +0,0 @@ -SMIA/SMIA++ sensor - -SMIA (Standard Mobile Imaging Architecture) is an image sensor standard -defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension -of that. These definitions are valid for both types of sensors. - -More detailed documentation can be found in -Documentation/devicetree/bindings/media/video-interfaces.txt . - -The device node should contain a "port" node which may contain one or more -endpoint nodes, in accordance with video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt . - -Mandatory properties --------------------- - -- compatible: "nokia,smia" -- reg: I2C address (0x10, or an alternative address) -- vana-supply: Analogue voltage supply (VANA), typically 2,8 volts (sensor - dependent). -- clocks: External clock to the sensor -- clock-frequency: Frequency of the external clock to the sensor -- link-frequencies: List of allowed data link frequencies. An array of - 64-bit elements. - - -Optional properties -------------------- - -- reset-gpios: XSHUTDOWN GPIO -- flash-leds: See ../video-interfaces.txt -- lens-focus: See ../video-interfaces.txt -- rotation: Integer property; valid values are 0 (sensor mounted upright) - and 180 (sensor mounted upside down). See - ../video-interfaces.txt . - - -Endpoint node mandatory properties ----------------------------------- - -- data-lanes: <1..n> - - -Example -------- - -&i2c2 { - clock-frequency = <400000>; - - camera-sensor@10 { - compatible = "nokia,smia"; - reg = <0x10>; - reset-gpios = <&gpio3 20 0>; - vana-supply = <&vaux3>; - clocks = <&omap3_isp 0>; - clock-frequency = <9600000>; - nokia,nvm-size = <512>; /* 8 * 64 */ - link-frequencies = /bits/ 64 <199200000 210000000 499200000>; - port { - smiapp_ep: endpoint { - data-lanes = <1 2>; - remote-endpoint = <&csi2a_ep>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml new file mode 100644 index 000000000000..b617cc5c6a9f --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/onnn,ar0521.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ON Semiconductor AR0521 MIPI CSI-2 sensor + +maintainers: + - Krzysztof HaÅ‚asa <khalasa@piap.pl> + +description: |- + The AR0521 is a raw CMOS image sensor with MIPI CSI-2 and + I2C-compatible control interface. + +properties: + compatible: + const: onnn,ar0521 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: extclk + + vaa-supply: + description: + Definition of the regulator used as analog (2.7 V) voltage supply. + + vdd-supply: + description: + Definition of the regulator used as digital core (1.2 V) voltage supply. + + vdd_io-supply: + description: + Definition of the regulator used as digital I/O (1.8 V) voltage supply. + + reset-gpios: + description: reset GPIO, usually active low + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + Video output port. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + const: 4 + data-lanes: + anyOf: + - items: + - const: 1 + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + +required: + - compatible + - reg + - clocks + - clock-names + - vaa-supply + - vdd-supply + - vdd_io-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/imx6qdl-clock.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ar0521: camera-sensor@36 { + compatible = "onnn,ar0521"; + reg = <0x36>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_camera>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "extclk"; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + vaa-supply = <®_2p7v>; + vdd-supply = <®_1p2v>; + vdd_io-supply = <®_1p8v>; + + port { + mipi_camera_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + data-lanes = <1 2 3 4>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml new file mode 100644 index 000000000000..f6b87892068a --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/onnn,mt9m114.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: onsemi 1/6-inch 720p CMOS Digital Image Sensor + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: |- + The onsemi MT9M114 is a 1/6-inch 720p (1.26 Mp) CMOS digital image sensor + with an active pixel-array size of 1296H x 976V. It is programmable through + an I2C interface and outputs image data over a 8-bit parallel or 1-lane MIPI + CSI-2 connection. + +properties: + compatible: + const: onnn,mt9m114 + + reg: + description: I2C device address + enum: + - 0x48 + - 0x5d + + clocks: + description: EXTCLK clock signal + maxItems: 1 + + vdd-supply: + description: + Core digital voltage supply, 1.8V + + vddio-supply: + description: + I/O digital voltage supply, 1.8V or 2.8V + + vaa-supply: + description: + Analog voltage supply, 2.8V + + reset-gpios: + description: |- + Reference to the GPIO connected to the RESET_BAR pin, if any (active + low). + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + bus-type: + enum: [4, 5, 6] + + link-frequencies: true + remote-endpoint: true + + # The number and mapping of lanes (for CSI-2), and the bus width and + # signal polarities (for parallel and BT.656) are fixed and must not + # be specified. + + required: + - bus-type + - link-frequencies + +required: + - compatible + - reg + - clocks + - vdd-supply + - vddio-supply + - vaa-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "onnn,mt9m114"; + reg = <0x48>; + + clocks = <&clk24m 0>; + + reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + + vddio-supply = <®_cam_1v8>; + vdd-supply = <®_cam_1v8>; + vaa-supply = <®_2p8v>; + + port { + endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + link-frequencies = /bits/ 64 <384000000>; + remote-endpoint = <&mipi_csi_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.txt b/Documentation/devicetree/bindings/media/i2c/ov2680.txt deleted file mode 100644 index 11e925ed9dad..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov2680.txt +++ /dev/null @@ -1,46 +0,0 @@ -* Omnivision OV2680 MIPI CSI-2 sensor - -Required Properties: -- compatible: should be "ovti,ov2680". -- clocks: reference to the xvclk input clock. -- clock-names: should be "xvclk". -- DOVDD-supply: Digital I/O voltage supply. -- DVDD-supply: Digital core voltage supply. -- AVDD-supply: Analog voltage supply. - -Optional Properties: -- reset-gpios: reference to the GPIO connected to the powerdown/reset pin, - if any. This is an active low signal to the OV2680. - -The device node must contain one 'port' child node for its digital output -video port, and this port must have a single endpoint in accordance with - the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Endpoint node required properties for CSI-2 connection are: -- remote-endpoint: a phandle to the bus receiver's endpoint node. -- clock-lanes: should be set to <0> (clock lane on hardware lane 0). -- data-lanes: should be set to <1> (one CSI-2 lane supported). - -Example: - -&i2c2 { - ov2680: camera-sensor@36 { - compatible = "ovti,ov2680"; - reg = <0x36>; - clocks = <&osc>; - clock-names = "xvclk"; - reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - DOVDD-supply = <&sw2_reg>; - DVDD-supply = <&sw2_reg>; - AVDD-supply = <®_peri_3p15v>; - - port { - ov2680_to_mipi: endpoint { - remote-endpoint = <&mipi_from_sensor>; - clock-lanes = <0>; - data-lanes = <1>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/ov2685.txt b/Documentation/devicetree/bindings/media/i2c/ov2685.txt deleted file mode 100644 index 625c4a8c0d53..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov2685.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Omnivision OV2685 MIPI CSI-2 sensor - -Required Properties: -- compatible: shall be "ovti,ov2685" -- clocks: reference to the xvclk input clock -- clock-names: shall be "xvclk" -- avdd-supply: Analog voltage supply, 2.8 volts -- dovdd-supply: Digital I/O voltage supply, 1.8 volts -- dvdd-supply: Digital core voltage supply, 1.8 volts -- reset-gpios: Low active reset gpio - -The device node shall contain one 'port' child node with an -'endpoint' subnode for its digital output video port, -in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. -The endpoint optional property 'data-lanes' shall be "<1>". - -Example: -&i2c7 { - ov2685: camera-sensor@3c { - compatible = "ovti,ov2685"; - reg = <0x3c>; - pinctrl-names = "default"; - pinctrl-0 = <&clk_24m_cam>; - - clocks = <&cru SCLK_TESTCLKOUT1>; - clock-names = "xvclk"; - - avdd-supply = <&pp2800_cam>; - dovdd-supply = <&pp1800>; - dvdd-supply = <&pp1800>; - reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - - port { - ucam_out: endpoint { - remote-endpoint = <&mipi_in_ucam>; - data-lanes = <1>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt b/Documentation/devicetree/bindings/media/i2c/ov5640.txt deleted file mode 100644 index c97c2f2da12d..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov5640.txt +++ /dev/null @@ -1,92 +0,0 @@ -* Omnivision OV5640 MIPI CSI-2 / parallel sensor - -Required Properties: -- compatible: should be "ovti,ov5640" -- clocks: reference to the xclk input clock. -- clock-names: should be "xclk". -- DOVDD-supply: Digital I/O voltage supply, 1.8 volts -- AVDD-supply: Analog voltage supply, 2.8 volts -- DVDD-supply: Digital core voltage supply, 1.5 volts - -Optional Properties: -- reset-gpios: reference to the GPIO connected to the reset pin, if any. - This is an active low signal to the OV5640. -- powerdown-gpios: reference to the GPIO connected to the powerdown pin, - if any. This is an active high signal to the OV5640. -- rotation: as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt, - valid values are 0 (sensor mounted upright) and 180 (sensor - mounted upside down). - -The device node must contain one 'port' child node for its digital output -video port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -OV5640 can be connected to a MIPI CSI-2 bus or a parallel bus endpoint. - -Endpoint node required properties for CSI-2 connection are: -- remote-endpoint: a phandle to the bus receiver's endpoint node. -- clock-lanes: should be set to <0> (clock lane on hardware lane 0) -- data-lanes: should be set to <1> or <1 2> (one or two CSI-2 lanes supported) - -Endpoint node required properties for parallel connection are: -- remote-endpoint: a phandle to the bus receiver's endpoint node. -- bus-width: shall be set to <8> for 8 bits parallel bus - or <10> for 10 bits parallel bus -- data-shift: shall be set to <2> for 8 bits parallel bus - (lines 9:2 are used) or <0> for 10 bits parallel bus -- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. -- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. -- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock - signal. - -Examples: - -&i2c1 { - ov5640: camera@3c { - compatible = "ovti,ov5640"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ov5640>; - reg = <0x3c>; - clocks = <&clks IMX6QDL_CLK_CKO>; - clock-names = "xclk"; - DOVDD-supply = <&vgen4_reg>; /* 1.8v */ - AVDD-supply = <&vgen3_reg>; /* 2.8v */ - DVDD-supply = <&vgen2_reg>; /* 1.5v */ - powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; - rotation = <180>; - - port { - /* MIPI CSI-2 bus endpoint */ - ov5640_to_mipi_csi2: endpoint { - remote-endpoint = <&mipi_csi2_from_ov5640>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; - }; - }; -}; - -&i2c1 { - ov5640: camera@3c { - compatible = "ovti,ov5640"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ov5640>; - reg = <0x3c>; - clocks = <&clk_ext_camera>; - clock-names = "xclk"; - - port { - /* Parallel bus endpoint */ - ov5640_to_parallel: endpoint { - remote-endpoint = <¶llel_from_ov5640>; - bus-width = <8>; - data-shift = <2>; /* lines 9:2 are used */ - hsync-active = <0>; - vsync-active = <0>; - pclk-sample = <1>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt deleted file mode 100644 index 72ad992f77be..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor - -The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with -an active array size of 2592H x 1944V. It is programmable through a serial I2C -interface. - -Required Properties: -- compatible: Value should be "ovti,ov5645". -- clocks: Reference to the xclk clock. -- clock-names: Should be "xclk". -- clock-frequency: Frequency of the xclk clock. -- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds - to the hardware pin PWDNB which is physically active low. -- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to - the hardware pin RESETB. -- vdddo-supply: Chip digital IO regulator. -- vdda-supply: Chip analog regulator. -- vddd-supply: Chip digital core regulator. - -The device node must contain one 'port' child node for its digital output -video port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - - &i2c1 { - ... - - ov5645: ov5645@3c { - compatible = "ovti,ov5645"; - reg = <0x3c>; - - enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&camera_rear_default>; - - clocks = <&clks 200>; - clock-names = "xclk"; - clock-frequency = <24000000>; - - vdddo-supply = <&camera_dovdd_1v8>; - vdda-supply = <&camera_avdd_2v8>; - vddd-supply = <&camera_dvdd_1v2>; - - port { - ov5645_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 2>; - remote-endpoint = <&csi0_ep>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt deleted file mode 100644 index 22e44945b661..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov5647.txt +++ /dev/null @@ -1,35 +0,0 @@ -Omnivision OV5647 raw image sensor ---------------------------------- - -OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces -and CCI (I2C compatible) control bus. - -Required properties: - -- compatible : "ovti,ov5647". -- reg : I2C slave address of the sensor. -- clocks : Reference to the xclk clock. - -The common video interfaces bindings (see video-interfaces.txt) should be -used to specify link to the image data receiver. The OV5647 device -node should contain one 'port' child node with an 'endpoint' subnode. - -Endpoint node mandatory properties: - -- remote-endpoint: A phandle to the bus receiver's endpoint node. - -Example: - - i2c@2000 { - ... - ov: camera@36 { - compatible = "ovti,ov5647"; - reg = <0x36>; - clocks = <&camera_clk>; - port { - camera_1: endpoint { - remote-endpoint = <&csi1_ep1>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/ov5695.txt b/Documentation/devicetree/bindings/media/i2c/ov5695.txt deleted file mode 100644 index 640a63717d96..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov5695.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Omnivision OV5695 MIPI CSI-2 sensor - -Required Properties: -- compatible: shall be "ovti,ov5695" -- clocks: reference to the xvclk input clock -- clock-names: shall be "xvclk" -- avdd-supply: Analog voltage supply, 2.8 volts -- dovdd-supply: Digital I/O voltage supply, 1.8 volts -- dvdd-supply: Digital core voltage supply, 1.2 volts -- reset-gpios: Low active reset gpio - -The device node shall contain one 'port' child node with an -'endpoint' subnode for its digital output video port, -in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. -The endpoint optional property 'data-lanes' shall be "<1 2>". - -Example: -&i2c7 { - ov5695: camera-sensor@36 { - compatible = "ovti,ov5695"; - reg = <0x36>; - pinctrl-names = "default"; - pinctrl-0 = <&clk_24m_cam>; - - clocks = <&cru SCLK_TESTCLKOUT1>; - clock-names = "xvclk"; - - avdd-supply = <&pp2800_cam>; - dovdd-supply = <&pp1800>; - dvdd-supply = <&pp1250_cam>; - reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - - port { - wcam_out: endpoint { - remote-endpoint = <&mipi_in_wcam>; - data-lanes = <1 2>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/ov7251.txt b/Documentation/devicetree/bindings/media/i2c/ov7251.txt deleted file mode 100644 index 8281151f7493..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov7251.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Omnivision 1/7.5-Inch B&W VGA CMOS Digital Image Sensor - -The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor -with an active array size of 640H x 480V. It is programmable through a serial -I2C interface. - -Required Properties: -- compatible: Value should be "ovti,ov7251". -- clocks: Reference to the xclk clock. -- clock-names: Should be "xclk". -- clock-frequency: Frequency of the xclk clock. -- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds - to the hardware pin XSHUTDOWN which is physically active low. -- vdddo-supply: Chip digital IO regulator. -- vdda-supply: Chip analog regulator. -- vddd-supply: Chip digital core regulator. - -The device node shall contain one 'port' child node with a single 'endpoint' -subnode for its digital output video port, in accordance with the video -interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - - &i2c1 { - ... - - ov7251: camera-sensor@60 { - compatible = "ovti,ov7251"; - reg = <0x60>; - - enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&camera_bw_default>; - - clocks = <&clks 200>; - clock-names = "xclk"; - clock-frequency = <24000000>; - - vdddo-supply = <&camera_dovdd_1v8>; - vdda-supply = <&camera_avdd_2v8>; - vddd-supply = <&camera_dvdd_1v2>; - - port { - ov7251_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0>; - remote-endpoint = <&csi0_ep>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.txt b/Documentation/devicetree/bindings/media/i2c/ov772x.txt deleted file mode 100644 index 0b3ede5b8e6a..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov772x.txt +++ /dev/null @@ -1,40 +0,0 @@ -* Omnivision OV7720/OV7725 CMOS sensor - -The Omnivision OV7720/OV7725 sensor supports multiple resolutions output, -such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can -support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats. - -Required Properties: -- compatible: shall be one of - "ovti,ov7720" - "ovti,ov7725" -- clocks: reference to the xclk input clock. - -Optional Properties: -- reset-gpios: reference to the GPIO connected to the RSTB pin which is - active low, if any. -- powerdown-gpios: reference to the GPIO connected to the PWDN pin which is - active high, if any. - -The device node shall contain one 'port' child node with one child 'endpoint' -subnode for its digital output video port, in accordance with the video -interface bindings defined in Documentation/devicetree/bindings/media/ -video-interfaces.txt. - -Example: - -&i2c0 { - ov772x: camera@21 { - compatible = "ovti,ov7725"; - reg = <0x21>; - reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>; - powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>; - clocks = <&xclk>; - - port { - ov772x_0: endpoint { - remote-endpoint = <&vcap1_in0>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml new file mode 100644 index 000000000000..816dac9c6f60 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2019 MediaTek Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV8856 CMOS Sensor + +maintainers: + - Sakari Ailus <sakari.ailus@linux.intel.com> + +description: |- + The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS + image sensor that delivers 3264x2448 at 30fps. It provides full-frame, + sub-sampled, and windowed 10-bit MIPI images in various formats via the + Serial Camera Control Bus (SCCB) interface. This chip is programmable + through I2C and two-wire SCCB. The sensor output is available via CSI-2 + serial data output (up to 4-lane). + +properties: + compatible: + const: ovti,ov8856 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: + Input clock for the sensor. + items: + - const: xvclk + + clock-frequency: + description: + Frequency of the xvclk clock in Hertz. + + dovdd-supply: + description: + Definition of the regulator used as interface power supply. + + avdd-supply: + description: + Definition of the regulator used as analog power supply. + + dvdd-supply: + description: + Definition of the regulator used as digital power supply. + + reset-gpios: + description: + The phandle and specifier for the GPIO that controls sensor reset. + This corresponds to the hardware pin XSHUTDOWN which is physically + active low. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - link-frequencies + +required: + - compatible + - reg + - clocks + - clock-names + - clock-frequency + - dovdd-supply + - avdd-supply + - dvdd-supply + - reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov8856: camera@10 { + compatible = "ovti,ov8856"; + reg = <0x10>; + + reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&clk_24m_cam>; + + clocks = <&cam_osc>; + clock-names = "xvclk"; + clock-frequency = <19200000>; + + avdd-supply = <&mt6358_vcama2_reg>; + dvdd-supply = <&mt6358_vcamd_reg>; + dovdd-supply = <&mt6358_vcamio_reg>; + + port { + wcam_out: endpoint { + remote-endpoint = <&mipi_in_wcam>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <360000000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml new file mode 100644 index 000000000000..67c1c291327b --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV02A10 CMOS Sensor + +maintainers: + - Dongchun Zhu <dongchun.zhu@mediatek.com> + +description: |- + The Omnivision OV02A10 is a low-cost, high performance, 1/5-inch, 2 megapixel + image sensor, which is the latest production derived from Omnivision's CMOS + image sensor technology. Ihis chip supports high frame rate speeds up to 30fps + @ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The + sensor output is available via CSI-2 serial data output. + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: ovti,ov02a10 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: + External clock for the sensor. + items: + - const: eclk + + clock-frequency: + description: + Frequency of the eclk clock in Hz. + + dovdd-supply: + description: + Definition of the regulator used as Digital I/O voltage supply. + + avdd-supply: + description: + Definition of the regulator used as Analog voltage supply. + + dvdd-supply: + description: + Definition of the regulator used as Digital core voltage supply. + + powerdown-gpios: + description: + Must be the device tree identifier of the GPIO connected to the + PD_PAD pin. This pin is used to place the OV02A10 into standby mode + or shutdown mode. As the line needs to be high for the powerdown mode + to be active, it should be marked GPIO_ACTIVE_HIGH. + maxItems: 1 + + reset-gpios: + description: + Must be the device tree identifier of the GPIO connected to the + RST_PD pin. If specified, it will be asserted during driver probe. + As the line needs to be low for the reset to be active, it should be + marked GPIO_ACTIVE_LOW. + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + link-frequencies: true + ovti,mipi-clock-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Definition of MIPI clock voltage unit. This entry corresponds to + the link speed defined by the 'link-frequencies' property. + If present, the value shall be in the range of 0-4. + default: 4 + + required: + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - clock-names + - clock-frequency + - dovdd-supply + - avdd-supply + - dvdd-supply + - powerdown-gpios + - reset-gpios + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov02a10: camera-sensor@3d { + compatible = "ovti,ov02a10"; + reg = <0x3d>; + + powerdown-gpios = <&pio 107 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>; + + clocks = <&ov02a10_clk>; + clock-names = "eclk"; + clock-frequency = <24000000>; + + rotation = <180>; + + dovdd-supply = <&ov02a10_dovdd>; + avdd-supply = <&ov02a10_avdd>; + dvdd-supply = <&ov02a10_dvdd>; + + port { + wcam_out: endpoint { + link-frequencies = /bits/ 64 <390000000>; + ovti,mipi-clock-voltage = <3>; + remote-endpoint = <&mipi_in_wcam>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml new file mode 100644 index 000000000000..cf456f8d9ddc --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov2680.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV2680 CMOS Sensor + +maintainers: + - Rui Miguel Silva <rmfrfs@gmail.com> + +description: |- + The OV2680 color sensor is a low voltage, high performance 1/5 inch UXGA (2 + megapixel) CMOS image sensor that provides a single-chip UXGA (1600 x 1200) + camera. It provides full-frame, sub-sampled, or windowed 10-bit images in + various formats via the control of the Serial Camera Control Bus (SCCB) + interface. The OV2680 has an image array capable of operating at up to 30 + frames per second (fps) in UXGA resolution. + +properties: + compatible: + const: ovti,ov2680 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xvclk + + reset-gpios: + description: + The phandle and specifier for the GPIO that controls sensor reset. + This corresponds to the hardware pin XSHUTDOWN which is physically + active low. + maxItems: 1 + + dovdd-supply: + description: + Definition of the regulator used as interface power supply. + + avdd-supply: + description: + Definition of the regulator used as analog power supply. + + dvdd-supply: + description: + Definition of the regulator used as digital power supply. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A node containing an output port node. + +required: + - compatible + - reg + - clocks + - clock-names + - dovdd-supply + - avdd-supply + - dvdd-supply + - reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov2680: camera-sensor@36 { + compatible = "ovti,ov2680"; + reg = <0x36>; + clocks = <&osc>; + clock-names = "xvclk"; + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + + dovdd-supply = <&sw2_reg>; + dvdd-supply = <&sw2_reg>; + avdd-supply = <®_peri_3p15v>; + + port { + ov2680_to_mipi: endpoint { + remote-endpoint = <&mipi_from_sensor>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml new file mode 100644 index 000000000000..e2ffe0a9c26b --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov2685.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV2685 Image Sensor + +maintainers: + - Shunqian Zheng <zhengsq@rock-chips.com> + +properties: + compatible: + const: ovti,ov2685 + + reg: + maxItems: 1 + + clocks: + items: + - description: XVCLK clock + + clock-names: + items: + - const: xvclk + + dvdd-supply: + description: Digital Domain Power Supply + + avdd-supply: + description: Analog Domain Power Supply + + dovdd-supply: + description: I/O Domain Power Supply + + reset-gpios: + maxItems: 1 + description: Reset Pin GPIO Control (active low) + + port: + description: MIPI CSI-2 transmitter port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 2 + + required: + - data-lanes + +required: + - compatible + - reg + - clocks + - clock-names + - dvdd-supply + - avdd-supply + - dovdd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov2685: camera-sensor@3c { + compatible = "ovti,ov2685"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&clk_24m_cam>; + + clocks = <&cru SCLK_TESTCLKOUT1>; + clock-names = "xvclk"; + + avdd-supply = <&pp2800_cam>; + dovdd-supply = <&pp1800>; + dvdd-supply = <&pp1800>; + reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml new file mode 100644 index 000000000000..d96199031b66 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov4689.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV4689 CMOS + +maintainers: + - Mikhail Rudenko <mike.rudenko@gmail.com> + +description: | + The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel + image sensor. Ihis chip supports high frame rate speeds up to 90 fps + at 2688x1520 resolution. It is programmable through an I2C + interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2 + connection. + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: ovti,ov4689 + + reg: + maxItems: 1 + + clocks: + description: + External clock (XVCLK) for the sensor, 6-64 MHz + maxItems: 1 + + dovdd-supply: + description: + Digital I/O voltage supply, 1.7-3.0 V + + avdd-supply: + description: + Analog voltage supply, 2.6-3.0 V + + dvdd-supply: + description: + Digital core voltage supply, 1.1-1.3 V + + powerdown-gpios: + description: + GPIO connected to the powerdown pin (active low) + + reset-gpios: + maxItems: 1 + description: + GPIO connected to the reset pin (active low) + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + link-frequencies: true + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - dovdd-supply + - avdd-supply + - dvdd-supply + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov4689: camera@36 { + compatible = "ovti,ov4689"; + reg = <0x36>; + + clocks = <&ov4689_clk>; + + avdd-supply = <&ov4689_avdd>; + dovdd-supply = <&ov4689_dovdd>; + dvdd-supply = <&ov4689_dvdd>; + + powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>; + reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>; + + orientation = <2>; + rotation = <0>; + + port { + wcam_out: endpoint { + remote-endpoint = <&mipi_in_wcam>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <504000000>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml new file mode 100644 index 000000000000..2c5e69356658 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5640.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV5640 Image Sensor + +maintainers: + - Steve Longerbeam <slongerbeam@gmail.com> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: ovti,ov5640 + + reg: + maxItems: 1 + + clocks: + description: XCLK Input Clock + + clock-names: + const: xclk + + AVDD-supply: + description: Analog voltage supply, 2.8 volts + + DVDD-supply: + description: Digital core voltage supply, 1.5 volts + + DOVDD-supply: + description: Digital I/O voltage supply, 1.8 volts + + powerdown-gpios: + maxItems: 1 + description: > + Reference to the GPIO connected to the powerdown pin, if any. + + reset-gpios: + maxItems: 1 + description: > + Reference to the GPIO connected to the reset pin, if any. + + port: + description: Digital Output Port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + const: 0 + + data-lanes: + minItems: 1 + maxItems: 2 + items: + enum: [1, 2] + + bus-width: + enum: [8, 10] + + data-shift: + enum: [0, 2] + +required: + - compatible + - reg + - clocks + - clock-names + - AVDD-supply + - DVDD-supply + - DOVDD-supply + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <&vgen4_reg>; /* 1.8v */ + AVDD-supply = <&vgen3_reg>; /* 2.8v */ + DVDD-supply = <&vgen2_reg>; /* 1.5v */ + powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + rotation = <180>; + + port { + /* MIPI CSI-2 bus endpoint */ + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_from_ov5640>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + clock-names = "xclk"; + DOVDD-supply = <&vgen4_reg>; /* 1.8v */ + AVDD-supply = <&vgen3_reg>; /* 2.8v */ + DVDD-supply = <&vgen2_reg>; /* 1.5v */ + + port { + /* Parallel bus endpoint */ + ov5640_to_parallel: endpoint { + remote-endpoint = <¶llel_from_ov5640>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml new file mode 100644 index 000000000000..01f8b2b3fd17 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5642.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV5642 Image Sensor + +maintainers: + - Fabio Estevam <festevam@gmail.com> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: ovti,ov5642 + + reg: + maxItems: 1 + + clocks: + description: XCLK Input Clock + + AVDD-supply: + description: Analog voltage supply, 2.8V. + + DVDD-supply: + description: Digital core voltage supply, 1.5V. + + DOVDD-supply: + description: Digital I/O voltage supply, 1.8V. + + powerdown-gpios: + maxItems: 1 + description: Reference to the GPIO connected to the powerdown pin, if any. + + reset-gpios: + maxItems: 1 + description: Reference to the GPIO connected to the reset pin, if any. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Video output port. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: [5, 6] + + bus-width: + enum: [8, 10] + default: 10 + + data-shift: + enum: [0, 2] + default: 0 + + hsync-active: + enum: [0, 1] + default: 1 + + vsync-active: + enum: [0, 1] + default: 1 + + pclk-sample: + enum: [0, 1] + default: 1 + + allOf: + - if: + properties: + bus-type: + const: 6 + then: + properties: + hsync-active: false + vsync-active: false + + - if: + properties: + bus-width: + const: 10 + then: + properties: + data-shift: + const: 0 + + required: + - bus-type + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "ovti,ov5642"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + clocks = <&clk_ext_camera>; + DOVDD-supply = <&vgen4_reg>; + AVDD-supply = <&vgen3_reg>; + DVDD-supply = <&vgen2_reg>; + powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + + port { + ov5642_to_parallel: endpoint { + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; + remote-endpoint = <¶llel_from_ov5642>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml new file mode 100644 index 000000000000..bc9b27afe3ea --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5645.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV5645 Image Sensor + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +properties: + compatible: + const: ovti,ov5645 + + reg: + maxItems: 1 + + clocks: + description: XCLK Input Clock + + clock-frequency: + description: Frequency of the xclk clock in Hz. + + vdda-supply: + description: Analog voltage supply, 2.8 volts + + vddd-supply: + description: Digital core voltage supply, 1.5 volts + + vdddo-supply: + description: Digital I/O voltage supply, 1.8 volts + + enable-gpios: + maxItems: 1 + description: + Reference to the GPIO connected to the PWDNB pin, if any. + + reset-gpios: + maxItems: 1 + description: + Reference to the GPIO connected to the RESETB pin, if any. + + port: + description: Digital Output Port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 2 + items: + enum: [1, 2] + + required: + - data-lanes + +required: + - compatible + - reg + - clocks + - vdddo-supply + - vdda-supply + - vddd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "ovti,ov5645"; + reg = <0x3c>; + clocks = <&clks 1>; + clock-frequency = <24000000>; + vdddo-supply = <&ov5645_vdddo_1v8>; + vdda-supply = <&ov5645_vdda_2v8>; + vddd-supply = <&ov5645_vddd_1v5>; + enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5645>; + + port { + ov5645_ep: endpoint { + remote-endpoint = <&csi0_ep>; + data-lanes = <1 2>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml new file mode 100644 index 000000000000..a2abed06a099 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5647.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV5647 raw image sensor + +maintainers: + - Dave Stevenson <dave.stevenson@raspberrypi.com> + - Jacopo Mondi <jacopo@jmondi.org> + +description: |- + The OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data + interfaces and CCI (I2C compatible) control bus. + +properties: + compatible: + const: ovti,ov5647 + + reg: + description: I2C device address. + maxItems: 1 + + clocks: + description: Reference to the xclk clock. + maxItems: 1 + + pwdn-gpios: + description: Reference to the GPIO connected to the pwdn pin. Active high. + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-noncontinuous: true + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov5647: camera@36 { + compatible = "ovti,ov5647"; + reg = <0x36>; + clocks = <&camera_clk>; + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + + port { + camera_out: endpoint { + remote-endpoint = <&csi1_ep1>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml new file mode 100644 index 000000000000..1f497679168c --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5648.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV5648 Image Sensor + +maintainers: + - Paul Kocialkowski <paul.kocialkowski@bootlin.com> + +properties: + compatible: + const: ovti,ov5648 + + reg: + maxItems: 1 + + clocks: + items: + - description: XVCLK Clock + + assigned-clocks: + maxItems: 1 + + assigned-clock-rates: + maxItems: 1 + + dvdd-supply: + description: Digital Domain Power Supply + + avdd-supply: + description: Analog Domain Power Supply (internal AVDD is used if missing) + + dovdd-supply: + description: I/O Domain Power Supply + + powerdown-gpios: + maxItems: 1 + description: Power Down Pin GPIO Control (active low) + + reset-gpios: + maxItems: 1 + description: Reset Pin GPIO Control (active low) + + port: + description: MIPI CSI-2 transmitter port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + link-frequencies: true + + data-lanes: + minItems: 1 + maxItems: 2 + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - assigned-clocks + - assigned-clock-rates + - dvdd-supply + - dovdd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-v3s-ccu.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov5648: camera@36 { + compatible = "ovti,ov5648"; + reg = <0x36>; + + dvdd-supply = <&ov5648_dvdd>; + avdd-supply = <&ov5648_avdd>; + dovdd-supply = <&ov5648_dovdd>; + clocks = <&ov5648_xvclk 0>; + assigned-clocks = <&ov5648_xvclk 0>; + assigned-clock-rates = <24000000>; + + + ov5648_out: port { + ov5648_out_mipi_csi2: endpoint { + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <210000000 168000000>; + + remote-endpoint = <&mipi_csi2_in_ov5648>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml new file mode 100644 index 000000000000..6e089fe1d613 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5670.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV5670 5 Megapixels raw image sensor + +maintainers: + - Jacopo Mondi <jacopo.mondi@ideasonboard.com> + +description: |- + The OV5670 is a 5 Megapixels raw image sensor which provides images in 10-bits + RAW BGGR Bayer format on a 2 data lanes MIPI CSI-2 serial interface and is + controlled through an I2C compatible control bus. + +properties: + compatible: + const: ovti,ov5670 + + reg: + maxItems: 1 + + clocks: + description: System clock. From 6 to 27 MHz. + maxItems: 1 + + powerdown-gpios: + description: Reference to the GPIO connected to the PWDNB pin. Active low. + + reset-gpios: + description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low. + maxItems: 1 + + avdd-supply: + description: Analog circuit power. Typically 2.8V. + + dvdd-supply: + description: Digital circuit power. Typically 1.2V. + + dovdd-supply: + description: Digital I/O circuit power. Typically 2.8V or 1.8V. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 2 + items: + enum: [1, 2] + + clock-noncontinuous: true + remote-endpoint: true + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov5670: sensor@36 { + compatible = "ovti,ov5670"; + reg = <0x36>; + + clocks = <&sensor_xclk>; + + port { + ov5670_ep: endpoint { + remote-endpoint = <&csi_ep>; + data-lanes = <1 2>; + clock-noncontinuous; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml new file mode 100644 index 000000000000..ad07204057f9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5675.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV5675 CMOS Sensor + +maintainers: + - Quentin Schulz <quentin.schulz@theobroma-systems.com> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +description: | + The Omnivision OV5675 is a high performance, 1/5-inch, 5 megapixel, CMOS + image sensor that delivers 2592x1944 at 30fps. It provides full-frame, + sub-sampled, and windowed 10-bit MIPI images in various formats via the + Serial Camera Control Bus (SCCB) interface. + + This chip is programmable through I2C and two-wire SCCB. The sensor output + is available via CSI-2 serial data output (up to 2-lane). + +properties: + compatible: + const: ovti,ov5675 + + reg: + maxItems: 1 + + clocks: + description: + System input clock (aka XVCLK). From 6 to 27 MHz. + maxItems: 1 + + dovdd-supply: + description: + Digital I/O voltage supply, 1.8 volts. + + avdd-supply: + description: + Analog voltage supply, 2.8 volts. + + dvdd-supply: + description: + Digital core voltage supply, 1.2 volts. + + reset-gpios: + description: + The phandle and specifier for the GPIO that controls sensor reset. + This corresponds to the hardware pin XSHUTDN which is physically + active low. + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 2 + + # Supports max data transfer of 900 Mbps per lane + link-frequencies: true + +required: + - compatible + - reg + - clocks + - dovdd-supply + - avdd-supply + - dvdd-supply + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/pinctrl/rockchip.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov5675: camera@36 { + compatible = "ovti,ov5675"; + reg = <0x36>; + + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_clkout_m0>; + + clocks = <&cru SCLK_CIF_OUT>; + assigned-clocks = <&cru SCLK_CIF_OUT>; + assigned-clock-rates = <19200000>; + + avdd-supply = <&vcc_1v8>; + dvdd-supply = <&vcc_1v2>; + dovdd-supply = <&vcc_2v8>; + + rotation = <90>; + orientation = <0>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <450000000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml new file mode 100644 index 000000000000..3368b3bd8ef2 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2022 Amarulasolutions +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV5693/OV5695 CMOS Sensors + +maintainers: + - Tommaso Merciai <tomm.merciai@gmail.com> + +description: | + The Omnivision OV5693/OV5695 are high performance, 1/4-inch, 5 megapixel, CMOS + image sensors that deliver 2592x1944 at 30fps. It provides full-frame, + sub-sampled, and windowed 10-bit MIPI images in various formats via the + Serial Camera Control Bus (SCCB) interface. + + OV5693/OV5695 are controlled via I2C and two-wire Serial Camera Control Bus + (SCCB). The sensor output is available via CSI-2 serial data output (up to + 2-lane). + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + - if: + properties: + compatible: + contains: + const: ovti,ov5693 + then: + properties: + port: + properties: + endpoint: + required: + - link-frequencies + +properties: + compatible: + enum: + - ovti,ov5693 + - ovti,ov5695 + + reg: + maxItems: 1 + + clocks: + description: + System input clock (aka XVCLK). From 6 to 27 MHz. + maxItems: 1 + + clock-names: + const: xvclk + + dovdd-supply: + description: + Digital I/O voltage supply, 1.8V. + + avdd-supply: + description: + Analog voltage supply, 2.8V. + + dvdd-supply: + description: + Digital core voltage supply, 1.2V. + + reset-gpios: + description: + The phandle and specifier for the GPIO that controls sensor reset. + This corresponds to the hardware pin XSHUTDN which is physically + active low. + maxItems: 1 + + port: + description: MIPI CSI-2 transmitter port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + link-frequencies: true + + data-lanes: + minItems: 1 + maxItems: 2 + + required: + - data-lanes + +required: + - compatible + - reg + - clocks + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/pinctrl/rockchip.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov5693: camera@36 { + compatible = "ovti,ov5693"; + reg = <0x36>; + + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_clkout_m0>; + + clocks = <&cru SCLK_CIF_OUT>; + assigned-clocks = <&cru SCLK_CIF_OUT>; + assigned-clock-rates = <19200000>; + + avdd-supply = <&vcc_1v8>; + dvdd-supply = <&vcc_1v2>; + dovdd-supply = <&vcc_2v8>; + + rotation = <90>; + orientation = <0>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <450000000>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml new file mode 100644 index 000000000000..2b6143aff391 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov64a40.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV64A40 Image Sensor + +maintainers: + - Jacopo Mondi <jacopo.mondi@ideasonboard.com> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: ovti,ov64a40 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + avdd-supply: + description: Analog voltage supply, 2.8 volts + + dvdd-supply: + description: Digital core voltage supply, 1.1 volts + + dovdd-supply: + description: Digital I/O voltage supply, 1.8 volts + + powerdown-gpios: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + bus-type: + enum: + - 1 # MIPI CSI-2 C-PHY + - 4 # MIPI CSI-2 D-PHY + data-lanes: true + link-frequencies: true + clock-noncontinuous: true + remote-endpoint: true + + required: + - bus-type + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@36 { + compatible = "ovti,ov64a40"; + reg = <0x36>; + clocks = <&camera_clk>; + dovdd-supply = <&vgen4_reg>; + avdd-supply = <&vgen3_reg>; + dvdd-supply = <&vgen2_reg>; + powerdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + rotation = <180>; + orientation = <2>; + + port { + endpoint { + remote-endpoint = <&mipi_csi2_in>; + bus-type = <4>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml new file mode 100644 index 000000000000..2e5187acbbb8 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV7251 Image Sensor + +description: + The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor + with an active array size of 640H x 480V. It is programmable through a serial + I2C interface. + +maintainers: + - Todor Tomov <todor.too@gmail.com> + +properties: + compatible: + const: ovti,ov7251 + + reg: + maxItems: 1 + + clocks: + description: XCLK Input Clock + + clock-names: + const: xclk + + clock-frequency: + description: Frequency of the xclk clock in Hz. + + vdda-supply: + description: Analog voltage supply, 2.8 volts + + vddd-supply: + description: Digital core voltage supply, 1.2 volts + + vdddo-supply: + description: Digital I/O voltage supply, 1.8 volts + + enable-gpios: + maxItems: 1 + description: + Reference to the GPIO connected to the XSHUTDOWN pin, if any. Polarity + is GPIO_ACTIVE_HIGH. + + port: + description: Digital Output Port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maximum: 1 + + data-lanes: + maxItems: 1 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - vdddo-supply + - vdda-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "ovti,ov7251"; + reg = <0x3c>; + clocks = <&clks 1>; + clock-frequency = <24000000>; + vdddo-supply = <&ov7251_vdddo_1v8>; + vdda-supply = <&ov7251_vdda_2v8>; + vddd-supply = <&ov7251_vddd_1v5>; + enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + + port { + ov7251_ep: endpoint { + remote-endpoint = <&csi0_ep>; + clock-lanes = <1>; + data-lanes = <0>; + link-frequencies = /bits/ 64 <240000000 319200000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml new file mode 100644 index 000000000000..5d24edba8f99 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov772x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV7720/OV7725 CMOS sensor + +maintainers: + - Jacopo Mondi <jacopo@jmondi.org> + +description: | + The Omnivision OV7720/OV7725 sensor supports multiple resolutions output, + such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can + support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats. + +properties: + compatible: + enum: + - ovti,ov7720 + - ovti,ov7725 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + reset-gpios: + description: | + Reference to the GPIO connected to the RSTB pin which is active low. + maxItems: 1 + + powerdown-gpios: + description: | + Reference to the GPIO connected to the PWDN pin which is active high. + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Video output port. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: [5, 6] + + bus-width: + enum: [8, 10] + default: 10 + + data-shift: + enum: [0, 2] + default: 0 + + hsync-active: + enum: [0, 1] + default: 1 + + vsync-active: + enum: [0, 1] + default: 1 + + pclk-sample: + enum: [0, 1] + default: 1 + + allOf: + - if: + properties: + bus-type: + const: 6 + then: + properties: + hsync-active: false + vsync-active: false + + - if: + properties: + bus-width: + const: 10 + then: + properties: + data-shift: + const: 0 + + required: + - bus-type + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + ov772x: camera@21 { + compatible = "ovti,ov7725"; + reg = <0x21>; + reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>; + clocks = <&xclk>; + + port { + ov772x_0: endpoint { + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; + vsync-active = <0>; + hsync-active = <0>; + pclk-sample = <0>; + bus-width = <8>; + data-shift = <0>; + remote-endpoint = <&vcap1_in0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml new file mode 100644 index 000000000000..a65f921ec0fd --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov8858.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV8858 Image Sensor + +maintainers: + - Jacopo Mondi <jacopo.mondi@ideasonboard.com> + - Nicholas Roth <nicholas@rothemail.net> + +description: | + The OmniVision OV8858 is a color CMOS 8 Megapixels (3264x2448) image sensor + controlled through an I2C-compatible SCCB bus. The sensor transmits images + on a MIPI CSI-2 output interface with up to 4 data lanes. + +properties: + compatible: + const: ovti,ov8858 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: XVCLK external clock + + clock-names: + const: xvclk + + dvdd-supply: + description: Digital Domain Power Supply + + avdd-supply: + description: Analog Domain Power Supply + + dovdd-supply: + description: I/O Domain Power Supply + + powerdown-gpios: + description: PWDNB powerdown GPIO (active low) + + reset-gpios: + maxItems: 1 + description: XSHUTDN reset GPIO (active low) + + port: + description: MIPI CSI-2 transmitter port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov8858: camera@36 { + compatible = "ovti,ov8858"; + reg = <0x36>; + + clocks = <&cru SCLK_CIF_OUT>; + clock-names = "xvclk"; + assigned-clocks = <&cru SCLK_CIF_OUT>; + assigned-clock-rates = <24000000>; + + dovdd-supply = <&vcc1v8_dvp>; + + reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1 2 3 4>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml new file mode 100644 index 000000000000..8a70e23ba6ab --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov8865.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV8865 Image Sensor + +maintainers: + - Paul Kocialkowski <paul.kocialkowski@bootlin.com> + +properties: + compatible: + const: ovti,ov8865 + + reg: + maxItems: 1 + + clocks: + items: + - description: EXTCLK Clock + + assigned-clocks: + maxItems: 1 + + assigned-clock-rates: + maxItems: 1 + + dvdd-supply: + description: Digital Domain Power Supply + + avdd-supply: + description: Analog Domain Power Supply + + dovdd-supply: + description: I/O Domain Power Supply + + powerdown-gpios: + maxItems: 1 + description: Power Down Pin GPIO Control (active low) + + reset-gpios: + maxItems: 1 + description: Reset Pin GPIO Control (active low) + + port: + description: MIPI CSI-2 transmitter port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + link-frequencies: true + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - assigned-clocks + - assigned-clock-rates + - dvdd-supply + - avdd-supply + - dovdd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-a83t-ccu.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov8865: camera@36 { + compatible = "ovti,ov8865"; + reg = <0x36>; + + pinctrl-names = "default"; + pinctrl-0 = <&csi_mclk_pin>; + + clocks = <&ccu CLK_CSI_MCLK>; + assigned-clocks = <&ccu CLK_CSI_MCLK>; + assigned-clock-rates = <24000000>; + + avdd-supply = <®_ov8865_avdd>; + dovdd-supply = <®_ov8865_dovdd>; + dvdd-supply = <®_ov8865_dvdd>; + + powerdown-gpios = <&pio 4 17 GPIO_ACTIVE_LOW>; /* PE17 */ + reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */ + + port { + ov8865_out_mipi_csi2: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <360000000>; + + remote-endpoint = <&mipi_csi2_in_ov8865>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml new file mode 100644 index 000000000000..79a7658f6d05 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Intel Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov9282.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV9282 Sensor + +maintainers: + - Paul J. Murphy <paul.j.murphy@intel.com> + - Daniele Alessandrelli <daniele.alessandrelli@intel.com> + +description: + OV9282 sensor is an OmniVision black & white CMOS active pixel digital image + sensor with an active array size of 1296H x 816V. It is programmable through + I2C interface. The I2C client address is fixed to 0x60/0x70 as per sensor data + sheet. Image data is sent through MIPI CSI-2. + OV9281 has a different lens chief ray angle. + +properties: + compatible: + enum: + - ovti,ov9281 + - ovti,ov9282 + reg: + description: I2C address + maxItems: 1 + + assigned-clocks: true + assigned-clock-parents: true + assigned-clock-rates: true + + clocks: + description: Clock frequency from 6 to 27MHz + maxItems: 1 + + reset-gpios: + description: Reference to the GPIO connected to the XCLR pin, if any. + maxItems: 1 + + avdd-supply: + description: Analog voltage supply, 2.8 volts + + dvdd-supply: + description: Digital core voltage supply, 1.2 volts + + dovdd-supply: + description: Digital I/O voltage supply, 1.8 volts + + port: + additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/port-base + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@60 { + compatible = "ovti,ov9282"; + reg = <0x60>; + clocks = <&ov9282_clk>; + + assigned-clocks = <&ov9282_clk>; + assigned-clock-parents = <&ov9282_clk_parent>; + assigned-clock-rates = <24000000>; + + port { + ov9282: endpoint { + remote-endpoint = <&cam>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <800000000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml new file mode 100644 index 000000000000..34a05df786ce --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/rda,rda5807.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc Communications RDA5807 FM radio receiver + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + compatible: + enum: + - rda,rda5807 + + reg: + description: I2C address. + maxItems: 1 + + power-supply: true + + rda,lnan: + description: Use LNAN input port. + type: boolean + + rda,lnap: + description: Use LNAP input port. + type: boolean + + rda,analog-out: + description: Enable analog audio output. + type: boolean + + rda,i2s-out: + description: Enable I2S digital audio output. + type: boolean + + rda,lna-microamp: + description: LNA working current, in micro-amperes. + default: 2500 + enum: [1800, 2100, 2500, 3000] + +required: + - compatible + - reg + - power-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + radio@11 { + compatible = "rda,rda5807"; + reg = <0x11>; + + power-supply = <&ldo6>; + + rda,lnan; + rda,lnap; + rda,analog-out; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml new file mode 100644 index 000000000000..c8f2955e0825 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/samsung,s5k5baf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +properties: + compatible: + const: samsung,s5k5baf + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mclk + + clock-frequency: + default: 24000000 + description: mclk clock frequency + + rstn-gpios: + maxItems: 1 + description: RSTN pin + + stbyn-gpios: + maxItems: 1 + description: STDBYN pin + + vdda-supply: + description: Analog power supply 2.8V (2.6V to 3.0V) + + vddio-supply: + description: I/O power supply 1.8V (1.65V to 1.95V) or 2.8V (2.5V to 3.1V) + + vddreg-supply: + description: + Regulator input power supply 1.8V (1.7V to 1.9V) or 2.8V (2.6V to 3.0) + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + items: + - const: 1 + +required: + - compatible + - clocks + - clock-names + - rstn-gpios + - stbyn-gpios + - vdda-supply + - vddio-supply + - vddreg-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@2d { + compatible = "samsung,s5k5baf"; + reg = <0x2d>; + clocks = <&camera 0>; + clock-names = "mclk"; + clock-frequency = <24000000>; + rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>; + stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>; + vdda-supply = <&cam_io_en_reg>; + vddio-supply = <&vtcam_reg>; + vddreg-supply = <&vt_core_15v_reg>; + + port { + endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml new file mode 100644 index 000000000000..7e83a94124b5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/samsung,s5k6a3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5K6A3(YX) raw image sensor + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data + interfaces and CCI (I2C compatible) control bus. + +properties: + compatible: + const: samsung,s5k6a3 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: extclk + + clock-frequency: + default: 24000000 + description: extclk clock frequency + + gpios: + maxItems: 1 + description: GPIO connected to the RESET pin + + afvdd-supply: + description: AF (actuator) voltage supply + + svdda-supply: + description: Core voltage supply + + svddio-supply: + description: I/O voltage supply + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + items: + - const: 1 + +required: + - compatible + - clocks + - clock-names + - gpios + - afvdd-supply + - svdda-supply + - svddio-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + clock-frequency = <24000000>; + clocks = <&camera 1>; + clock-names = "extclk"; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; + afvdd-supply = <&ldo19_reg>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + + port { + endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt deleted file mode 100644 index f11f28a5fda4..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor - -The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with -an active array size of 4224H x 3200V. It is programmable through an I2C -interface. -Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum -throughput of 1.2Gbps/lane. - - -Required Properties: -- compatible: Shall be "sony,imx214". -- reg: I2C bus address of the device. Depending on how the sensor is wired, - it shall be <0x10> or <0x1a>; -- enable-gpios: GPIO descriptor for the enable pin. -- vdddo-supply: Chip digital IO regulator (1.8V). -- vdda-supply: Chip analog regulator (2.7V). -- vddd-supply: Chip digital core regulator (1.12V). -- clocks: Reference to the xclk clock. -- clock-frequency: Frequency of the xclk clock. - -Optional Properties: -- flash-leds: See ../video-interfaces.txt -- lens-focus: See ../video-interfaces.txt - -The imx214 device node shall contain one 'port' child node with -an 'endpoint' subnode. For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Required Properties on endpoint: -- data-lanes: check ../video-interfaces.txt -- link-frequencies: check ../video-interfaces.txt -- remote-endpoint: check ../video-interfaces.txt - -Example: - - camera-sensor@1a { - compatible = "sony,imx214"; - reg = <0x1a>; - vdddo-supply = <&pm8994_lvs1>; - vddd-supply = <&camera_vddd_1v12>; - vdda-supply = <&pm8994_l17>; - lens-focus = <&ad5820>; - enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; - clocks = <&mmcc CAMSS_MCLK0_CLK>; - clock-frequency = <24000000>; - port { - imx214_ep: endpoint { - data-lanes = <1 2 3 4>; - link-frequencies = /bits/ 64 <480000000>; - remote-endpoint = <&csiphy0_ep>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml new file mode 100644 index 000000000000..60903da84e1f --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx214.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony 1/3.06-Inch 13.13MP CMOS Digital Image Sensor + +maintainers: + - Ricardo Ribalda <ribalda@kernel.org> + +description: | + The Sony IMX214 is a 1/3.06-inch CMOS active pixel digital image sensor with + an active array size of 4224H x 3200V. It is programmable through an I2C + interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a + maximum throughput of 1.2Gbps/lane. + +allOf: + - $ref: ../video-interface-devices.yaml# + +properties: + compatible: + const: sony,imx214 + + reg: + enum: + - 0x10 + - 0x1a + + clocks: + description: Reference to the xclk clock. + maxItems: 1 + + clock-frequency: + description: Frequency of the xclk clock in Hz. + + enable-gpios: + description: GPIO descriptor for the enable pin. + maxItems: 1 + + vdddo-supply: + description: Chip digital IO regulator (1.8V). + + vdda-supply: + description: Chip analog regulator (2.7V). + + vddd-supply: + description: Chip digital core regulator (1.12V). + + flash-leds: true + lens-focus: true + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Video output port. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + anyOf: + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-frequency + - enable-gpios + - vdddo-supply + - vdda-supply + - vddd-supply + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera-sensor@1a { + compatible = "sony,imx214"; + reg = <0x1a>; + vdddo-supply = <&pm8994_lvs1>; + vddd-supply = <&camera_vddd_1v12>; + vdda-supply = <&pm8994_l17>; + lens-focus = <&ad5820>; + enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + clocks = <&camera_clk>; + clock-frequency = <24000000>; + + port { + imx214_ep: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <480000000>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml new file mode 100644 index 000000000000..b397a730ee94 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor + +maintainers: + - Leon Luo <leonl@leopardimaging.com> + +description: | + The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an + active array size of 3864H x 2202V. It is programmable through I2C interface. + Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440 + Mbps. + +properties: + compatible: + const: sony,imx274 + + reg: + const: 0x1a + + reset-gpios: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: inck + + vana-supply: + description: Sensor 2.8 V analog supply. + + vdig-supply: + description: Sensor 1.8 V digital core supply. + + vddl-supply: + description: Sensor digital IO 1.2 V supply. + + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imx274: camera-sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + reset-gpios = <&gpio_sensor 0 0>; + + port { + sensor_out: endpoint { + remote-endpoint = <&csiss_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml new file mode 100644 index 000000000000..a531badc16c9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx290.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX290 1/2.8-Inch CMOS Image Sensor + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: |- + The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with Square + Pixel, available in either mono or colour variants. It is programmable + through I2C and 4-wire interfaces. + + The sensor output is available via CMOS logic parallel SDR output, Low voltage + LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the default. + No bindings have been defined for the other busses. + + imx290lqr is the full model identifier for the colour variant. "sony,imx290" + is treated the same as this as it was the original compatible string. + imx290llr is the mono version of the sensor. + +properties: + compatible: + oneOf: + - enum: + - sony,imx290lqr # Colour + - sony,imx290llr # Monochrome + - sony,imx327lqr # Colour + - const: sony,imx290 + deprecated: true + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: Input clock (37.125 MHz or 74.25 MHz) + items: + - const: xclk + + clock-frequency: + description: Frequency of the xclk clock in Hz + + vdda-supply: + description: Analog power supply (2.9V) + + vddd-supply: + description: Digital core power supply (1.2V) + + vdddo-supply: + description: Digital I/O power supply (1.8V) + + reset-gpios: + description: Sensor reset (XCLR) GPIO + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Video output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + anyOf: + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - clock-frequency + - vdda-supply + - vddd-supply + - vdddo-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imx290: camera-sensor@1a { + compatible = "sony,imx290lqr"; + reg = <0x1a>; + + pinctrl-names = "default"; + pinctrl-0 = <&camera_rear_default>; + + clocks = <&gcc 90>; + clock-names = "xclk"; + clock-frequency = <37125000>; + + vdddo-supply = <&camera_vdddo_1v8>; + vdda-supply = <&camera_vdda_2v8>; + vddd-supply = <&camera_vddd_1v5>; + + reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + + port { + imx290_ep: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <445500000>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml new file mode 100644 index 000000000000..65ad9c100e45 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx296.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX296 1/2.8-Inch CMOS Image Sensor + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: |- + The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image + sensor with square pixel array and 1.58 M effective pixels. This chip + features a global shutter with variable charge-integration time. It is + programmable through I2C and 4-wire interfaces. The sensor output is + available via CSI-2 serial data output (1 Lane). + +properties: + compatible: + enum: + - sony,imx296 + - sony,imx296ll + - sony,imx296lq + description: + The IMX296 sensor exists in two different models, a colour variant + (IMX296LQ) and a monochrome variant (IMX296LL). The device exposes the + model through registers, allowing for auto-detection with a common + "sony,imx296" compatible string. However, some camera modules disable the + ability to read the sensor model register, which disables this feature. + In those cases, the exact model needs to be specified as "sony,imx296ll" + or "sony,imx296lq". + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: Input clock (37.125 MHz, 54 MHz or 74.25 MHz) + items: + - const: inck + + avdd-supply: + description: Analog power supply (3.3V) + + dvdd-supply: + description: Digital power supply (1.2V) + + ovdd-supply: + description: Interface power supply (1.8V) + + reset-gpios: + description: Sensor reset (XCLR) GPIO + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - avdd-supply + - dvdd-supply + - ovdd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imx296: camera-sensor@1a { + compatible = "sony,imx296"; + reg = <0x1a>; + + pinctrl-names = "default"; + pinctrl-0 = <&camera_rear_default>; + + clocks = <&gcc 90>; + clock-names = "inck"; + + avdd-supply = <&camera_vdda_3v3>; + dvdd-supply = <&camera_vddd_1v2>; + ovdd-supply = <&camera_vddo_1v8>; + + reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + + port { + imx296_ep: endpoint { + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml new file mode 100644 index 000000000000..bce57b22f7b6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Intel Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx334.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX334 Sensor + +maintainers: + - Paul J. Murphy <paul.j.murphy@intel.com> + - Daniele Alessandrelli <daniele.alessandrelli@intel.com> + +description: + IMX334 sensor is a Sony CMOS active pixel digital image sensor with an active + array size of 3864H x 2202V. It is programmable through I2C interface. The + I2C client address is fixed to 0x1a as per sensor data sheet. Image data is + sent through MIPI CSI-2. + +properties: + compatible: + const: sony,imx334 + reg: + description: I2C address + maxItems: 1 + + assigned-clocks: true + assigned-clock-parents: true + assigned-clock-rates: true + + clocks: + description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz + maxItems: 1 + + reset-gpios: + description: Reference to the GPIO connected to the XCLR pin, if any. + + port: + additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/port-base + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@1a { + compatible = "sony,imx334"; + reg = <0x1a>; + clocks = <&imx334_clk>; + + assigned-clocks = <&imx334_clk>; + assigned-clock-parents = <&imx334_clk_parent>; + assigned-clock-rates = <24000000>; + + port { + imx334: endpoint { + remote-endpoint = <&cam>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <891000000 445500000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml new file mode 100644 index 000000000000..106c36ee966d --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Intel Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx335.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX335 Sensor + +maintainers: + - Paul J. Murphy <paul.j.murphy@intel.com> + - Daniele Alessandrelli <daniele.alessandrelli@intel.com> + +description: + IMX335 sensor is a Sony CMOS active pixel digital image sensor with an active + array size of 2592H x 1944V. It is programmable through I2C interface. The + I2C client address is fixed to 0x1a as per sensor data sheet. Image data is + sent through MIPI CSI-2. + +properties: + compatible: + const: sony,imx335 + reg: + description: I2C address + maxItems: 1 + + assigned-clocks: true + assigned-clock-parents: true + assigned-clock-rates: true + + clocks: + description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz + maxItems: 1 + + avdd-supply: + description: Analog power supply (2.9V) + + ovdd-supply: + description: Interface power supply (1.8V) + + dvdd-supply: + description: Digital power supply (1.2V) + + reset-gpios: + description: Reference to the GPIO connected to the XCLR pin, if any. + maxItems: 1 + + port: + additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/port-base + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@1a { + compatible = "sony,imx335"; + reg = <0x1a>; + clocks = <&imx335_clk>; + + assigned-clocks = <&imx335_clk>; + assigned-clock-parents = <&imx335_clk_parent>; + assigned-clock-rates = <24000000>; + + avdd-supply = <&camera_vdda_2v9>; + ovdd-supply = <&camera_vddo_1v8>; + dvdd-supply = <&camera_vddd_1v2>; + + port { + imx335: endpoint { + remote-endpoint = <&cam>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <594000000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml new file mode 100644 index 000000000000..d9b7815650fd --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Intel Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx412.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX412 Sensor + +maintainers: + - Paul J. Murphy <paul.j.murphy@intel.com> + - Daniele Alessandrelli <daniele.alessandrelli@intel.com> + +description: + IMX412 sensor is a Sony CMOS active pixel digital image sensor with an active + array size of 4072H x 3176V. It is programmable through I2C interface. The + I2C client address is fixed to 0x1a as per sensor data sheet. Image data is + sent through MIPI CSI-2. + +properties: + compatible: + enum: + - sony,imx412 + - sony,imx577 + reg: + description: I2C address + maxItems: 1 + + assigned-clocks: true + assigned-clock-parents: true + assigned-clock-rates: true + + clocks: + description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz + maxItems: 1 + + dovdd-supply: + description: Interface power supply. + + avdd-supply: + description: Analog power supply. + + dvdd-supply: + description: Digital power supply. + + reset-gpios: + description: Reference to the GPIO connected to the XCLR pin, if any. + maxItems: 1 + + port: + additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/port-base + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@1a { + compatible = "sony,imx412"; + reg = <0x1a>; + clocks = <&imx412_clk>; + + assigned-clocks = <&imx412_clk>; + assigned-clock-parents = <&imx412_clk_parent>; + assigned-clock-rates = <24000000>; + + port { + imx412: endpoint { + remote-endpoint = <&cam>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <600000000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml new file mode 100644 index 000000000000..9a00dab2e8a3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx415.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX415 CMOS Image Sensor + +maintainers: + - Michael Riesch <michael.riesch@wolfvision.net> + +description: |- + The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type + solid-state image sensor with a square pixel array and 8.46 M effective + pixels. This chip operates with analog 2.9 V, digital 1.1 V, and interface + 1.8 V triple power supply, and has low power consumption. + The IMX415 is programmable through I2C interface. The sensor output is + available via CSI-2 serial data output (two or four lanes). + +allOf: + - $ref: ../video-interface-devices.yaml# + +properties: + compatible: + const: sony,imx415 + + reg: + maxItems: 1 + + clocks: + description: Input clock (24 MHz, 27 MHz, 37.125 MHz, 72 MHz or 74.25 MHz) + maxItems: 1 + + avdd-supply: + description: Analog power supply (2.9 V) + + dvdd-supply: + description: Digital power supply (1.1 V) + + ovdd-supply: + description: Interface power supply (1.8 V) + + reset-gpios: + description: Sensor reset (XCLR) GPIO + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - avdd-supply + - dvdd-supply + - ovdd-supply + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imx415: camera-sensor@1a { + compatible = "sony,imx415"; + reg = <0x1a>; + avdd-supply = <&vcc2v9_cam>; + clocks = <&clock_cam>; + dvdd-supply = <&vcc1v1_cam>; + lens-focus = <&vcm>; + orientation = <2>; + ovdd-supply = <&vcc1v8_cam>; + reset-gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>; + rotation = <180>; + + port { + imx415_ep: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <445500000>; + remote-endpoint = <&mipi_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt deleted file mode 100644 index 7976e6c40a80..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt +++ /dev/null @@ -1,82 +0,0 @@ -STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge - -MIPID02 has two CSI-2 input ports, only one of those ports can be active at a -time. Active port input stream will be de-serialized and its content outputted -through PARALLEL output port. -CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2 second -input port is a single lane 800Mbps. Both ports support clock and data lane -polarity swap. First port also supports data lane swap. -PARALLEL output port has a maximum width of 12 bits. -Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888, RGB444, -YUV420 8-bit, YUV422 8-bit and YUV420 10-bit. - -Required Properties: -- compatible: shall be "st,st-mipid02" -- clocks: reference to the xclk input clock. -- clock-names: shall be "xclk". -- VDDE-supply: sensor digital IO supply. Must be 1.8 volts. -- VDDIN-supply: sensor internal regulator supply. Must be 1.8 volts. - -Optional Properties: -- reset-gpios: reference to the GPIO connected to the xsdn pin, if any. - This is an active low signal to the mipid02. - -Required subnodes: - - ports: A ports node with one port child node per device input and output - port, in accordance with the video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - port nodes are numbered as follows: - - Port Description - ----------------------------- - 0 CSI-2 first input port - 1 CSI-2 second input port - 2 PARALLEL output - -Endpoint node required property for CSI-2 connection is: -- data-lanes: shall be <1> for Port 1. for Port 0 dual-lane operation shall be -<1 2> or <2 1>. For Port 0 single-lane operation shall be <1> or <2>. -Endpoint node optional property for CSI-2 connection is: -- lane-polarities: any lane can be inverted or not. - -Endpoint node required property for PARALLEL connection is: -- bus-width: shall be set to <6>, <7>, <8>, <10> or <12>. -Endpoint node optional properties for PARALLEL connection are: -- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. -LOW being the default. -- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. -LOW being the default. - -Example: - -mipid02: csi2rx@14 { - compatible = "st,st-mipid02"; - reg = <0x14>; - status = "okay"; - clocks = <&clk_ext_camera_12>; - clock-names = "xclk"; - VDDE-supply = <&vdd>; - VDDIN-supply = <&vdd>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - - ep0: endpoint { - data-lanes = <1 2>; - remote-endpoint = <&mipi_csi2_in>; - }; - }; - port@2 { - reg = <2>; - - ep2: endpoint { - bus-width = <8>; - hsync-active = <0>; - vsync-active = <0>; - remote-endpoint = <¶llel_out>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml new file mode 100644 index 000000000000..b68141264c0e --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/st,st-mipid02.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge + +maintainers: + - Benjamin Mugnier <benjamin.mugnier@foss.st.com> + - Sylvain Petinot <sylvain.petinot@foss.st.com> + +description: + MIPID02 has two CSI-2 input ports, only one of those ports can be + active at a time. Active port input stream will be de-serialized + and its content outputted through PARALLEL output port. + CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2 + second input port is a single lane 800Mbps. Both ports support clock + and data lane polarity swap. First port also supports data lane swap. + PARALLEL output port has a maximum width of 12 bits. + Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888, + RGB444, YUV420 8-bit, YUV422 8-bit and YUV420 10-bit. + +properties: + compatible: + const: st,st-mipid02 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xclk + + VDDE-supply: + description: + Sensor digital IO supply. Must be 1.8 volts. + + VDDIN-supply: + description: + Sensor internal regulator supply. Must be 1.8 volts. + + reset-gpios: + description: + Reference to the GPIO connected to the xsdn pin, if any. + This is an active low signal to the mipid02. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 first input port + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: + Single-lane operation shall be <1> or <2> . + Dual-lane operation shall be <1 2> or <2 1> . + minItems: 1 + maxItems: 2 + + lane-polarities: + description: + Any lane can be inverted or not. + minItems: 1 + maxItems: 2 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 second input port + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: + Single-lane operation shall be <1> or <2> . + maxItems: 1 + + lane-polarities: + description: + Any lane can be inverted or not. + maxItems: 1 + + required: + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Output port + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-width: + enum: [6, 7, 8, 10, 12] + + required: + - bus-width + + anyOf: + - required: + - port@0 + - required: + - port@1 + + required: + - port@2 + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - VDDE-supply + - VDDIN-supply + - ports + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + mipid02: csi2rx@14 { + compatible = "st,st-mipid02"; + reg = <0x14>; + clocks = <&clk_ext_camera_12>; + clock-names = "xclk"; + VDDE-supply = <&vdd>; + VDDIN-supply = <&vdd>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + ep0: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&mipi_csi2_in>; + }; + }; + port@2 { + reg = <2>; + + ep2: endpoint { + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + remote-endpoint = <¶llel_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml new file mode 100644 index 000000000000..8c28848b226a --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2022 STMicroelectronics SA. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family + +maintainers: + - Benjamin Mugnier <benjamin.mugnier@foss.st.com> + - Sylvain Petinot <sylvain.petinot@foss.st.com> + +description: |- + STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a + quad lanes 800Mbps per lane. + Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16. + Following part number are supported + - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors. + Maximum frame rate is 75 fps. + - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors. + Maximum frame rate is 60 fps. + +properties: + compatible: + const: st,st-vgxy61 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + VCORE-supply: + description: + Sensor digital core supply. Must be 1.2 volts. + + VDDIO-supply: + description: + Sensor digital IO supply. Must be 1.8 volts. + + VANA-supply: + description: + Sensor analog supply. Must be 2.8 volts. + + reset-gpios: + description: + Reference to the GPIO connected to the reset pin, if any. + This is an active low signal to the vgxy61. + + st,strobe-gpios-polarity: + description: + Invert polarity of illuminator's lights strobe GPIOs. + These GPIOs directly drive the illuminator LEDs. + type: boolean + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: + CSI lanes to use + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + remote-endpoint: true + + required: + - data-lanes + +required: + - compatible + - clocks + - VCORE-supply + - VDDIO-supply + - VANA-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + vgxy61: csi2tx@10 { + compatible = "st,st-vgxy61"; + reg = <0x10>; + clocks = <&clk_ext_camera>; + VCORE-supply = <&v1v2>; + VDDIO-supply = <&v1v8>; + VANA-supply = <&v2v8>; + reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>; + port { + ep0: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_csi2_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml new file mode 100644 index 000000000000..e37317f81072 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/techwell,tw9900.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Techwell TW9900 NTSC/PAL video decoder + +maintainers: + - Mehdi Djait <mehdi.djait@bootlin.com> + +description: + The tw9900 is a multi-standard video decoder, supporting NTSC, PAL standards + with auto-detection features. + +properties: + compatible: + const: techwell,tw9900 + + reg: + maxItems: 1 + + vdd-supply: + description: VDD power supply + + reset-gpios: + description: GPIO descriptor for the RESET input pin + maxItems: 1 + + powerdown-gpios: + description: GPIO descriptor for the POWERDOWN input pin + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Analog input port + + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: CVBS over MUX0 + + endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint + description: CVBS over MUX1 + + endpoint@2: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Chroma over CIN0 and Y over MUX0 + + endpoint@3: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Chroma over CIN0 and Y over MUX1 + + oneOf: + - required: + - endpoint@0 + - required: + - endpoint@1 + - required: + - endpoint@2 + - required: + - endpoint@3 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for the decoder output. + + + required: + - port@0 + - port@1 + +required: + - compatible + - ports + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/display/sdtv-standards.h> + #include <dt-bindings/gpio/gpio.h> + + composite_connector { + compatible = "composite-video-connector"; + label = "tv"; + sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>; + + port { + composite_to_tw9900: endpoint { + remote-endpoint = <&tw9900_to_composite>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + video-decoder@44 { + compatible = "techwell,tw9900"; + reg = <0x44>; + + vdd-supply = <&tw9900_supply>; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + tw9900_to_composite: endpoint@0 { + reg = <0>; + remote-endpoint = <&composite_to_tw9900>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&cif_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml new file mode 100644 index 000000000000..1978fbb77a6c --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml @@ -0,0 +1,224 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 Ideas on Board +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/thine,thp7312.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: THine THP7312 + +maintainers: + - Paul Elder <paul.elder@@ideasonboard.com> + +description: + The THP7312 is a standalone ISP controlled over i2c, and is capable of + various image processing and correction functions, including 3A control. It + can be connected to CMOS image sensors from various vendors, supporting both + MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2 + or parallel. The hardware is capable of transmitting and receiving MIPI + interlaved data strams with data types or multiple virtual channel + identifiers. + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: thine,thp7312 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: CLKI clock input + + thine,boot-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + default: 1 + description: + Boot mode of the THP7312, reflecting the value of the BOOT[0] pin strap. + 0 is for the SPI/2-wire slave boot, 1 is for the SPI master boot (from + external flash ROM). + + reset-gpios: + maxItems: 1 + description: + Reference to the GPIO connected to the RESET_N pin, if any. + Must be released (set high) after all supplies are applied. + + vddcore-supply: + description: + 1.2V supply for core, PLL, MIPI rx and MIPI tx. + + vhtermrx-supply: + description: + Supply for input (RX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel. + + vddtx-supply: + description: + Supply for output (TX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel. + + vddhost-supply: + description: + Supply for host interface. 1.8V, 2.8V, or 3.3V. + + vddcmos-supply: + description: + Supply for sensor interface. 1.8V, 2.8V, or 3.3V. + + vddgpio-0-supply: + description: + Supply for GPIO_0. 1.8V, 2.8V, or 3.3V. + + vddgpio-1-supply: + description: + Supply for GPIO_1. 1.8V, 2.8V, or 3.3V. + + orientation: true + rotation: true + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + const: 4 # CSI-2 D-PHY + + data-lanes: + description: + This property is for lane reordering between the THP7312 and the + SoC. The sensor supports either two-lane, or four-lane operation. + If this property is omitted four-lane operation is assumed. For + two-lane operation the property must be set to <1 2>. + minItems: 2 + maxItems: 4 + items: + maximum: 4 + + sensors: + type: object + description: List of connected sensors + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^sensor@[01]$": + type: object + description: + Sensors connected to the first and second input, with one node per + sensor. + + properties: + thine,model: + $ref: /schemas/types.yaml#/definitions/string + description: + Model of the connected sensors. Must be a valid compatible string. + + reg: + description: THP7312 input port number + items: + - maximum: 1 + + data-lanes: + $ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes + items: + maxItems: 4 + description: + This property is for lane reordering between the THP7312 and the imaging + sensor that it is connected to. + + required: + - reg + - data-lanes + + additionalProperties: false + + required: + - "#address-cells" + - "#size-cells" + + additionalProperties: false + +required: + - compatible + - reg + - reset-gpios + - clocks + - vddcore-supply + - vhtermrx-supply + - vddtx-supply + - vddhost-supply + - vddcmos-supply + - vddgpio-0-supply + - vddgpio-1-supply + - sensors + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@61 { + compatible = "thine,thp7312"; + reg = <0x61>; + + pinctrl-names = "default"; + pinctrl-0 = <&cam1_pins_default>; + + reset-gpios = <&pio 119 GPIO_ACTIVE_LOW>; + clocks = <&camera61_clk>; + + vddcore-supply = <&vsys_v4p2>; + vhtermrx-supply = <&vsys_v4p2>; + vddtx-supply = <&vsys_v4p2>; + vddhost-supply = <&vsys_v4p2>; + vddcmos-supply = <&vsys_v4p2>; + vddgpio-0-supply = <&vsys_v4p2>; + vddgpio-1-supply = <&vsys_v4p2>; + + orientation = <0>; + rotation = <0>; + + sensors { + #address-cells = <1>; + #size-cells = <0>; + + sensor@0 { + thine,model = "sony,imx258"; + reg = <0>; + + data-lanes = <4 1 3 2>; + }; + }; + + port { + thp7312_2_endpoint: endpoint { + remote-endpoint = <&mipi_thp7312_2>; + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + data-lanes = <4 2 1 3>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml new file mode 100644 index 000000000000..f6612bb0f667 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub913.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DS90UB913 FPD-Link III Serializer + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> + +description: + The TI DS90UB913 is an FPD-Link III video serializer for parallel video. + +properties: + compatible: + enum: + - ti,ds90ub913a-q1 + + '#gpio-cells': + const: 2 + description: + First cell is the GPO pin number, second cell is the flags. The GPO pin + number must be in range of [0, 3]. Note that GPOs 2 and 3 are not + available in external oscillator mode. + + gpio-controller: true + + clocks: + maxItems: 1 + description: + Reference clock connected to the CLKIN pin. + + clock-names: + items: + - const: clkin + + '#clock-cells': + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Parallel input port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + required: + - pclk-sample + + port@1: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: FPD-Link III output port + + required: + - port@0 + - port@1 + + i2c: + $ref: /schemas/i2c/i2c-controller.yaml# + unevaluatedProperties: false + +required: + - compatible + - '#gpio-cells' + - gpio-controller + - '#clock-cells' + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + serializer { + compatible = "ti,ds90ub913a-q1"; + + gpio-controller; + #gpio-cells = <2>; + + clocks = <&clk_cam_48M>; + clock-names = "clkin"; + + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ub913_in: endpoint { + remote-endpoint = <&sensor_out>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&deser_fpd_in>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + + clocks = <&fixed_clock>; + + port { + sensor_out: endpoint { + remote-endpoint = <&ub913_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml new file mode 100644 index 000000000000..2030366994d1 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub953.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DS90UB953 FPD-Link III Serializer + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> + +description: + The TI DS90UB953 is an FPD-Link III video serializer for MIPI CSI-2. + +properties: + compatible: + enum: + - ti,ds90ub953-q1 + - ti,ds90ub971-q1 + + '#gpio-cells': + const: 2 + description: + First cell is the GPIO pin number, second cell is the flags. The GPIO pin + number must be in range of [0, 3]. + + gpio-controller: true + + clocks: + maxItems: 1 + description: + Reference clock connected to the CLKIN pin. + + clock-names: + items: + - const: clkin + + '#clock-cells': + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 input port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: FPD-Link III output port + + required: + - port@0 + - port@1 + + i2c: + $ref: /schemas/i2c/i2c-controller.yaml# + unevaluatedProperties: false + +required: + - compatible + - '#gpio-cells' + - gpio-controller + - '#clock-cells' + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + serializer { + compatible = "ti,ds90ub953-q1"; + + gpio-controller; + #gpio-cells = <2>; + + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ub953_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&sensor_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&deser_fpd_in>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + + reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>; + + clocks = <&serializer>; + clock-names = "inck"; + + port { + sensor_out: endpoint { + remote-endpoint = <&ub953_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml new file mode 100644 index 000000000000..0b71e6f911a8 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml @@ -0,0 +1,428 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub960.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> + +description: + The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO + forwarding. + +allOf: + - $ref: /schemas/i2c/i2c-atr.yaml# + +properties: + compatible: + enum: + - ti,ds90ub960-q1 + - ti,ds90ub9702-q1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: + Reference clock connected to the REFCLK pin. + + clock-names: + items: + - const: refclk + + powerdown-gpios: + maxItems: 1 + description: + Specifier for the GPIO connected to the PDB pin. + + i2c-alias-pool: + minItems: 1 + maxItems: 32 + + links: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + ti,manual-strobe: + type: boolean + description: + Enable manual strobe position and EQ level + + patternProperties: + '^link@[0-3]$': + type: object + additionalProperties: false + properties: + reg: + description: The link number + maxItems: 1 + + i2c-alias: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The I2C address used for the serializer. Transactions to this + address on the I2C bus where the deserializer resides are + forwarded to the serializer. + + ti,rx-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # RAW10 + - 1 # RAW12 HF + - 2 # RAW12 LF + - 3 # CSI2 SYNC + - 4 # CSI2 NON-SYNC + description: + FPD-Link Input Mode. This should reflect the hardware and the + default mode of the connected device. + + ti,cdr-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # FPD-Link III + - 1 # FPD-Link IV + description: + FPD-Link CDR Mode. This should reflect the hardware and the + default mode of the connected device. + + ti,strobe-pos: + $ref: /schemas/types.yaml#/definitions/int32 + minimum: -13 + maximum: 13 + description: Manual strobe position + + ti,eq-level: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 14 + description: Manual EQ level + + serializer: + type: object + description: FPD-Link Serializer node + + required: + - reg + - i2c-alias + - ti,rx-mode + - serializer + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: FPD-Link input 0 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for FPD-Link port. If the RX mode for this port is RAW, + hsync-active and vsync-active must be defined. + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: FPD-Link input 1 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for FPD-Link port. If the RX mode for this port is RAW, + hsync-active and vsync-active must be defined. + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: FPD-Link input 2 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for FPD-Link port. If the RX mode for this port is RAW, + hsync-active and vsync-active must be defined. + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: FPD-Link input 3 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + description: + Endpoint for FPD-Link port. If the RX mode for this port is RAW, + hsync-active and vsync-active must be defined. + + port@4: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 Output 0 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + link-frequencies: + maxItems: 1 + + required: + - data-lanes + - link-frequencies + + port@5: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 Output 1 + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + link-frequencies: + maxItems: 1 + + required: + - data-lanes + - link-frequencies + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + - port@5 + +required: + - compatible + - reg + - clocks + - clock-names + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + + deser@3d { + compatible = "ti,ds90ub960-q1"; + reg = <0x3d>; + + clock-names = "refclk"; + clocks = <&fixed_clock>; + + powerdown-gpios = <&pca9555 7 GPIO_ACTIVE_LOW>; + + i2c-alias-pool = <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* Port 0, Camera 0 */ + port@0 { + reg = <0>; + + ub960_fpd3_1_in: endpoint { + remote-endpoint = <&ub953_1_out>; + }; + }; + + /* Port 1, Camera 1 */ + port@1 { + reg = <1>; + + ub960_fpd3_2_in: endpoint { + remote-endpoint = <&ub913_2_out>; + hsync-active = <0>; + vsync-active = <1>; + }; + }; + + /* Port 2, unconnected */ + port@2 { + reg = <2>; + }; + + /* Port 3, unconnected */ + port@3 { + reg = <3>; + }; + + /* Port 4, CSI-2 TX */ + port@4 { + reg = <4>; + ds90ub960_0_csi_out: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <800000000>; + remote-endpoint = <&csi2_phy0>; + }; + }; + + /* Port 5, unconnected */ + port@5 { + reg = <5>; + }; + }; + + links { + #address-cells = <1>; + #size-cells = <0>; + + /* Link 0 has DS90UB953 serializer and IMX274 sensor */ + + link@0 { + reg = <0>; + i2c-alias = <0x44>; + + ti,rx-mode = <3>; + + serializer1: serializer { + compatible = "ti,ds90ub953-q1"; + + gpio-controller; + #gpio-cells = <2>; + + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ub953_1_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&sensor_1_out>; + }; + }; + + port@1 { + reg = <1>; + + ub953_1_out: endpoint { + remote-endpoint = <&ub960_fpd3_1_in>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + + reset-gpios = <&serializer1 0 GPIO_ACTIVE_LOW>; + + port { + sensor_1_out: endpoint { + remote-endpoint = <&ub953_1_in>; + }; + }; + }; + }; + }; + }; /* End of link@0 */ + + /* Link 1 has DS90UB913 serializer and MT9V111 sensor */ + + link@1 { + reg = <1>; + i2c-alias = <0x45>; + + ti,rx-mode = <0>; + + serializer2: serializer { + compatible = "ti,ds90ub913a-q1"; + + gpio-controller; + #gpio-cells = <2>; + + clocks = <&clk_cam_48M>; + clock-names = "clkin"; + + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ub913_2_in: endpoint { + remote-endpoint = <&sensor_2_out>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + + ub913_2_out: endpoint { + remote-endpoint = <&ub960_fpd3_2_in>; + }; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + + clocks = <&serializer2>; + + port { + sensor_2_out: endpoint { + remote-endpoint = <&ub913_2_in>; + }; + }; + }; + }; + }; + }; /* End of link@1 */ + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml new file mode 100644 index 000000000000..1c476b635b69 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/toshiba,tc358746.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358746 Parallel to MIPI CSI2 Bridge + +maintainers: + - Marco Felsch <kernel@pengutronix.de> + +description: |- + The Toshiba TC358746 converts a parallel video stream into a MIPI CSI-2 + stream. The direction can be either parallel-in -> csi-out or csi-in -> + parallel-out The chip is programmable through I2C and SPI but the SPI + interface is only supported in parallel-in -> csi-out mode. + + Note that the current device tree bindings only support the + parallel-in -> csi-out path. + +properties: + compatible: + const: toshiba,tc358746 + + reg: + maxItems: 1 + + clocks: + description: + The phandle to the reference clock source. This corresponds to the + hardware pin REFCLK. + maxItems: 1 + + clock-names: + const: refclk + + "#clock-cells": + description: | + The bridge can act as clock provider for the sensor. To enable this + support #clock-cells must be specified. Attention if this feature is used + then the mclk rate must be at least: (2 * link-frequency) / 8 + `------------------´ ^ + internal PLL rate smallest possible + mclk-div + const: 0 + + clock-output-names: + description: + The clock name of the MCLK output, the default name is tc358746-mclk. + maxItems: 1 + + vddc-supply: + description: Digital core voltage supply, 1.2 volts + + vddio-supply: + description: Digital I/O voltage supply, 1.8 volts + + vddmipi-supply: + description: MIPI CSI phy voltage supply, 1.2 volts + + reset-gpios: + description: + The phandle and specifier for the GPIO that controls the chip reset. + This corresponds to the hardware pin RESX which is physically active low. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Input port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + hsync-active: true + vsync-active: true + bus-type: + enum: [ 5, 6 ] + + required: + - hsync-active + - vsync-active + - bus-type + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + clock-noncontinuous: true + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - clock-names + - vddc-supply + - vddio-supply + - vddmipi-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + csi-bridge@e { + compatible = "toshiba,tc358746"; + reg = <0xe>; + + clocks = <&refclk>; + clock-names = "refclk"; + + reset-gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + + vddc-supply = <&v1_2d>; + vddio-supply = <&v1_8d>; + vddmipi-supply = <&v1_2d>; + + /* sensor mclk provider */ + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* Input */ + port@0 { + reg = <0>; + tc358746_in: endpoint { + remote-endpoint = <&sensor_out>; + hsync-active = <0>; + vsync-active = <0>; + bus-type = <5>; + }; + }; + + /* Output */ + port@1 { + reg = <1>; + tc358746_out: endpoint { + remote-endpoint = <&mipi_csi2_in>; + data-lanes = <1 2>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <216000000>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt index 6c88ce858d08..94b908ace53c 100644 --- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt +++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt @@ -53,10 +53,10 @@ Optional Connector Properties: ============================== - sdtv-standards: Set the possible signals to which the hardware tries to lock - instead of using the autodetection mechnism. Please look at + instead of using the autodetection mechanism. Please look at [1] for more information. -[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt. +[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml. Example - three input sources: #include <dt-bindings/display/sdtv-standards.h> diff --git a/Documentation/devicetree/bindings/media/imx7-csi.txt b/Documentation/devicetree/bindings/media/imx7-csi.txt deleted file mode 100644 index d80ceefa0c00..000000000000 --- a/Documentation/devicetree/bindings/media/imx7-csi.txt +++ /dev/null @@ -1,42 +0,0 @@ -Freescale i.MX7 CMOS Sensor Interface -===================================== - -csi node --------- - -This is device node for the CMOS Sensor Interface (CSI) which enables the chip -to connect directly to external CMOS image sensors. - -Required properties: - -- compatible : "fsl,imx7-csi" or "fsl,imx6ul-csi"; -- reg : base address and length of the register set for the device; -- interrupts : should contain CSI interrupt; -- clocks : list of clock specifiers, see - Documentation/devicetree/bindings/clock/clock-bindings.txt for details; -- clock-names : must contain "mclk"; - -The device node shall contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in: -Documentation/devicetree/bindings/media/video-interfaces.txt. - -In the following example a remote endpoint is a video multiplexer. - -example: - - csi: csi@30710000 { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "fsl,imx7-csi"; - reg = <0x30710000 0x10000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>; - clock-names = "mclk"; - - port { - csi_from_csi_mux: endpoint { - remote-endpoint = <&csi_mux_to_csi>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt deleted file mode 100644 index 71fd74ed3ec8..000000000000 --- a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt +++ /dev/null @@ -1,90 +0,0 @@ -Freescale i.MX7 Mipi CSI2 -========================= - -mipi_csi2 node --------------- - -This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is -compatible with previous version of Samsung D-phy. - -Required properties: - -- compatible : "fsl,imx7-mipi-csi2"; -- reg : base address and length of the register set for the device; -- interrupts : should contain MIPI CSIS interrupt; -- clocks : list of clock specifiers, see - Documentation/devicetree/bindings/clock/clock-bindings.txt for details; -- clock-names : must contain "pclk", "wrap" and "phy" entries, matching - entries in the clock property; -- power-domains : a phandle to the power domain, see - Documentation/devicetree/bindings/power/power_domain.txt for details. -- reset-names : should include following entry "mrst"; -- resets : a list of phandle, should contain reset entry of - reset-names; -- phy-supply : from the generic phy bindings, a phandle to a regulator that - provides power to MIPI CSIS core; - -Optional properties: - -- clock-frequency : The IP's main (system bus) clock frequency in Hz, default - value when this property is not specified is 166 MHz; -- fsl,csis-hs-settle : differential receiver (HS-RX) settle time; - -The device node should contain two 'port' child nodes with one child 'endpoint' -node, according to the bindings defined in: - Documentation/devicetree/bindings/ media/video-interfaces.txt. - The following are properties specific to those nodes. - -port node ---------- - -- reg : (required) can take the values 0 or 1, where 0 shall be - related to the sink port and port 1 shall be the source - one; - -endpoint node -------------- - -- data-lanes : (required) an array specifying active physical MIPI-CSI2 - data input lanes and their mapping to logical lanes; this - shall only be applied to port 0 (sink port), the array's - content is unused only its length is meaningful, - in this case the maximum length supported is 2; - -example: - - mipi_csi: mipi-csi@30750000 { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "fsl,imx7-mipi-csi2"; - reg = <0x30750000 0x10000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_IPG_ROOT_CLK>, - <&clks IMX7D_MIPI_CSI_ROOT_CLK>, - <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; - clock-names = "pclk", "wrap", "phy"; - clock-frequency = <166000000>; - power-domains = <&pgc_mipi_phy>; - phy-supply = <®_1p0d>; - resets = <&src IMX7_RESET_MIPI_PHY_MRST>; - reset-names = "mrst"; - fsl,csis-hs-settle = <3>; - - port@0 { - reg = <0>; - - mipi_from_sensor: endpoint { - remote-endpoint = <&ov2680_to_mipi>; - data-lanes = <1>; - }; - }; - - port@1 { - reg = <1>; - - mipi_vc0_to_csi_mux: endpoint { - remote-endpoint = <&csi_mux_from_mipi_vc0>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt deleted file mode 100644 index 7ec2c8c8a3b9..000000000000 --- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt +++ /dev/null @@ -1,50 +0,0 @@ -Marvell MMP2 camera host interface - -Required properties: - - compatible: Should be "marvell,mmp2-ccic". - - reg: Register base and size. - - interrupts: The interrupt number. - - #clock-cells: Must be 0. - -Optional properties: - - clocks: Reference to the input clock as specified by - Documentation/devicetree/bindings/clock/clock-bindings.txt. - - clock-names: Names of the clocks used; "axi" for the AXI bus interface, - "func" for the peripheral clock and "phy" for the parallel - video bus interface. - - clock-output-names: Optional clock source for sensors. Shall be "mclk". - -Required subnodes: - - port: The parallel bus interface port with a single endpoint linked to - the sensor's endpoint as described in - Documentation/devicetree/bindings/media/video-interfaces.txt. - -Required endpoint properties: - - bus-type: data bus type, <5> or <6> for Parallel or Bt.656 respectively - - pclk-sample: pixel clock polarity - - hsync-active: horizontal synchronization polarity (only required for - parallel bus) - - vsync-active: vertical synchronization polarity (only required for - parallel bus) - -Example: - - camera0: camera@d420a000 { - compatible = "marvell,mmp2-ccic"; - reg = <0xd420a000 0x800>; - interrupts = <42>; - clocks = <&soc_clocks MMP2_CLK_CCIC0>; - clock-names = "axi"; - #clock-cells = <0>; - clock-output-names = "mclk"; - - port { - camera0_0: endpoint { - remote-endpoint = <&ov7670_0>; - bus-type = <5>; /* Parallel */ - hsync-active = <1>; /* Active high */ - vsync-active = <1>; /* Active high */ - pclk-sample = <0>; /* Falling */ - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml new file mode 100644 index 000000000000..de3e483f146a --- /dev/null +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/marvell,mmp2-ccic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP2 camera host interface + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + $nodename: + pattern: '^camera@[a-f0-9]+$' + + compatible: + const: marvell,mmp2-ccic + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + hsync-active: true + vsync-active: true + pclk-sample: true + bus-type: true + + clocks: + minItems: 1 + items: + - description: AXI bus interface clock + - description: Peripheral clock + - description: Parallel video bus interface clock + + clock-names: + const: axi + + '#clock-cells': + const: 0 + + clock-output-names: + const: mclk + +required: + - compatible + - reg + - interrupts + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/marvell,mmp2.h> + #include <dt-bindings/media/video-interfaces.h> + #include <dt-bindings/power/marvell,mmp2.h> + + camera@d420a000 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a000 0x800>; + interrupts = <42>; + clocks = <&soc_clocks MMP2_CLK_CCIC0>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; + + port { + camera0_0: endpoint { + remote-endpoint = <&ov7670_0>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; + hsync-active = <1>; /* Active high */ + vsync-active = <1>; /* Active high */ + pclk-sample = <0>; /* Falling */ + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml new file mode 100644 index 000000000000..03f31b009085 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-fg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 Film Grain + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + Film Grain (FG) is a Media Data Path 3 (MDP3) component used to add + the film grain according to the AOMedia Video 1 (AV1) standard. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-fg + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14002000 { + compatible = "mediatek,mt8195-mdp3-fg"; + reg = <0x14002000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_FG>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml new file mode 100644 index 000000000000..d4609bba6578 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-hdr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 HDR + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + A Media Data Path 3 (MDP3) component used to perform conversion from + High Dynamic Range (HDR) to Standard Dynamic Range (SDR). + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-hdr + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14004000 { + compatible = "mediatek,mt8195-mdp3-hdr"; + reg = <0x14004000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_HDR>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml new file mode 100644 index 000000000000..59db8306485b --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-rdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Read Direct Memory Access + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: | + MediaTek Read Direct Memory Access(RDMA) component used to do read DMA. + It contains one line buffer to store the sufficient pixel data, and + must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8183-mdp3-rdma + - mediatek,mt8195-mdp3-rdma + - mediatek,mt8195-vdo1-rdma + - items: + - const: mediatek,mt8188-vdo1-rdma + - const: mediatek,mt8195-vdo1-rdma + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/<chip>-gce.h. + + mediatek,gce-events: + description: + The event id which is mapping to the specific hardware event signal + to gce. The event id is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/uint32-array + + mediatek,scp: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the System Control Processor (SCP) used for initializing + and stopping the MDP3, for sending frame data locations to the MDP3's + VPU and to install Inter-Processor Interrupt handlers to control + processing states. + + power-domains: + maxItems: 1 + + clocks: + items: + - description: RDMA clock + - description: RSZ clock + minItems: 1 + + iommus: + maxItems: 1 + + mboxes: + items: + - description: used for 1st data pipe from RDMA + - description: used for 2nd data pipe from RDMA + - description: used for 3rd data pipe from RDMA + - description: used for 4th data pipe from RDMA + - description: used for the data pipe from SPLIT + minItems: 1 + + interrupts: + maxItems: 1 + + '#dma-cells': + const: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - power-domains + - clocks + - iommus + - '#dma-cells' + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8183-mdp3-rdma + + then: + properties: + clocks: + minItems: 2 + + mboxes: + minItems: 2 + + required: + - mboxes + - mediatek,gce-events + + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-mdp3-rdma + + then: + properties: + clocks: + maxItems: 1 + + mboxes: + minItems: 5 + + required: + - mediatek,gce-events + + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-vdo1-rdma + + then: + properties: + clocks: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/gce/mt8183-gce.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/memory/mt8183-larb-port.h> + + dma-controller@14001000 { + compatible = "mediatek,mt8183-mdp3-rdma"; + reg = <0x14001000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>, + <CMDQ_EVENT_MDP_RDMA0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MDP_RSZ1>; + iommus = <&iommu>; + mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>, + <&gce 21 CMDQ_THR_PRIO_LOWEST>; + #dma-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml new file mode 100644 index 000000000000..f5676bec4326 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-rsz.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Resizer + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: | + One of Media Data Path 3 (MDP3) components used to do frame resizing. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8183-mdp3-rsz + - items: + - enum: + - mediatek,mt8195-mdp3-rsz + - const: mediatek,mt8183-mdp3-rsz + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/<chip>-gce.h. + + mediatek,gce-events: + description: + The event id which is mapping to the specific hardware event signal + to gce. The event id is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/uint32-array + + clocks: + minItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - mediatek,gce-events + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/gce/mt8183-gce.h> + + mdp3_rsz0: mdp3-rsz0@14003000 { + compatible = "mediatek,mt8183-mdp3-rsz"; + reg = <0x14003000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ0_SOF>, + <CMDQ_EVENT_MDP_RSZ0_EOF>; + clocks = <&mmsys CLK_MM_MDP_RSZ0>; + }; + + mdp3_rsz1: mdp3-rsz1@14004000 { + compatible = "mediatek,mt8183-mdp3-rsz"; + reg = <0x14004000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ1_SOF>, + <CMDQ_EVENT_MDP_RSZ1_EOF>; + clocks = <&mmsys CLK_MM_MDP_RSZ1>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml new file mode 100644 index 000000000000..d815bea29154 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-stitch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 STITCH + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + One of Media Data Path 3 (MDP3) components used to combine multiple video frame + with overlapping fields of view to produce a segmented panorame. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-stitch + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14003000 { + compatible = "mediatek,mt8195-mdp3-stitch"; + reg = <0x14003000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_STITCH>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml new file mode 100644 index 000000000000..14ea556d4f82 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-tcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 Tone Curve Conversion + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +description: + Tone Curve Conversion (TCC) is one of Media Profile Path 3 (MDP3) components. + It is used to handle the tone mapping of various gamma curves in order to + achieve HDR10 effects. This helps adapt the content to the color and + brightness range that standard display devices typically support. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-tcc + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@1400b000 { + compatible = "mediatek,mt8195-mdp3-tcc"; + reg = <0x1400b000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_TCC>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml new file mode 100644 index 000000000000..8ab7f2d8e148 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-tdshp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 Two-Dimensional Sharpness + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + Two-Dimensional Sharpness (TDSHP) is a Media Profile Path 3 (MDP3) component + used to perform image edge sharpening and enhance vividness and contrast. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-tdshp + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14007000 { + compatible = "mediatek,mt8195-mdp3-tdshp"; + reg = <0x14007000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml new file mode 100644 index 000000000000..53a679338402 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-wrot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Write DMA with Rotation + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: | + One of Media Data Path 3 (MDP3) components used to write DMA with frame rotation. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8183-mdp3-wrot + - items: + - enum: + - mediatek,mt8195-mdp3-wrot + - const: mediatek,mt8183-mdp3-wrot + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/<chip>-gce.h. + + mediatek,gce-events: + description: + The event id which is mapping to the specific hardware event signal + to gce. The event id is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/uint32-array + + power-domains: + maxItems: 1 + + clocks: + minItems: 1 + + iommus: + maxItems: 1 + + '#dma-cells': + const: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - mediatek,gce-events + - power-domains + - clocks + - iommus + - '#dma-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/gce/mt8183-gce.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/memory/mt8183-larb-port.h> + + dma-controller@14005000 { + compatible = "mediatek,mt8183-mdp3-wrot"; + reg = <0x14005000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>, + <CMDQ_EVENT_MDP_WROT0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + iommus = <&iommu>; + #dma-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml new file mode 100644 index 000000000000..e5448c60e3eb --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek JPEG Decoder + +maintainers: + - kyrie wu <kyrie.wu@mediatek.corp-partner.google.com> + +description: + MediaTek JPEG Decoder is the JPEG decode hardware present in MediaTek SoCs + +properties: + compatible: + const: mediatek,mt8195-jpgdec + + power-domains: + maxItems: 1 + + iommus: + maxItems: 6 + description: + Points to the respective IOMMU block with master port as argument, see + Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + Ports are according to the HW. + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + +# Required child node: +patternProperties: + "^jpgdec@[0-9a-f]+$": + type: object + description: + The jpeg decoder hardware device node which should be added as subnodes to + the main jpeg node. + + properties: + compatible: + const: mediatek,mt8195-jpgdec-hw + + reg: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 32 + description: + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: jpgdec + + power-domains: + maxItems: 1 + + required: + - compatible + - reg + - iommus + - interrupts + - clocks + - clock-names + - power-domains + + additionalProperties: false + +required: + - compatible + - power-domains + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/mt8195-memory-port.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/power/mt8195-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + jpgdec-master { + compatible = "mediatek,mt8195-jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>; + iommus = <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA0>, + <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA0>, + <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA1>, + <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA1>, + <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>, + <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + jpgdec@1a040000 { + compatible = "mediatek,mt8195-jpgdec-hw"; + reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */ + iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_JPGDEC>; + clock-names = "jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>; + }; + + jpgdec@1a050000 { + compatible = "mediatek,mt8195-jpgdec-hw"; + reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */ + iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_JPGDEC_C1>; + clock-names = "jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>; + }; + + jpgdec@1b040000 { + compatible = "mediatek,mt8195-jpgdec-hw"; + reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */ + iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA1>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET1>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET0>; + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGDEC>; + clock-names = "jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml new file mode 100644 index 000000000000..596186497b68 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek JPEG Encoder + +maintainers: + - kyrie wu <kyrie.wu@mediatek.corp-partner.google.com> + +description: + MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs + +properties: + compatible: + const: mediatek,mt8195-jpgenc + + power-domains: + maxItems: 1 + + iommus: + maxItems: 4 + description: + Points to the respective IOMMU block with master port as argument, see + Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + Ports are according to the HW. + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + +# Required child node: +patternProperties: + "^jpgenc@[0-9a-f]+$": + type: object + description: + The jpeg encoder hardware device node which should be added as subnodes to + the main jpeg node. + + properties: + compatible: + const: mediatek,mt8195-jpgenc-hw + + reg: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 32 + description: + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: jpgenc + + power-domains: + maxItems: 1 + + required: + - compatible + - reg + - iommus + - interrupts + - clocks + - clock-names + - power-domains + + additionalProperties: false + +required: + - compatible + - power-domains + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/mt8195-memory-port.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/power/mt8195-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + jpgenc-master { + compatible = "mediatek,mt8195-jpgenc"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>; + iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>, + <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + jpgenc@1a030000 { + compatible = "mediatek,mt8195-jpgenc-hw"; + reg = <0 0x1a030000 0 0x10000>; + iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>, + <&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>, + <&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>, + <&iommu_vdo M4U_PORT_L19_JPGENC_BSDMA>; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_JPGENC>; + clock-names = "jpgenc"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC>; + }; + + jpgenc@1b030000 { + compatible = "mediatek,mt8195-jpgenc-hw"; + reg = <0 0x1b030000 0 0x10000>; + iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>, + <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGENC>; + clock-names = "jpgenc"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml new file mode 100644 index 000000000000..b401c67e3ba0 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,vcodec-decoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Video Decode Accelerator + +maintainers: + - Yunfei Dong <yunfei.dong@mediatek.com> + +description: |+ + Mediatek Video Decode is the video decode hardware present in Mediatek + SoCs which supports high resolution decoding functionalities. + +properties: + compatible: + enum: + - mediatek,mt8173-vcodec-dec + - mediatek,mt8183-vcodec-dec + + reg: + minItems: 11 + maxItems: 11 + + reg-names: + items: + - const: misc + - const: ld + - const: top + - const: cm + - const: ad + - const: av + - const: pp + - const: hwd + - const: hwq + - const: hwb + - const: hwg + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 8 + + clock-names: + minItems: 1 + maxItems: 8 + + assigned-clocks: true + + assigned-clock-parents: true + + assigned-clock-rates: true + + power-domains: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 32 + description: | + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + mediatek,vpu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Describes point to vpu. + + mediatek,scp: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Describes point to scp. + + mediatek,vdecsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to the vdecsys syscon node. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - iommus + - mediatek,vdecsys + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8183-vcodec-dec + + then: + required: + - mediatek,scp + + properties: + clocks: + minItems: 1 + maxItems: 1 + + clock-names: + items: + - const: vdec + + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8173-vcodec-dec + + then: + required: + - mediatek,vpu + + properties: + clocks: + minItems: 8 + maxItems: 8 + + clock-names: + items: + - const: vcodecpll + - const: univpll_d2 + - const: clk_cci400_sel + - const: vdec_sel + - const: vdecpll + - const: vencpll + - const: venc_lt_sel + - const: vdec_bus_clk_src + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/memory/mt8173-larb-port.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt8173-power.h> + + vcodec_dec: vcodec@16020000 { + compatible = "mediatek,mt8173-vcodec-dec"; + reg = <0x16020000 0x1000>, /*VDEC_MISC*/ + <0x16021000 0x800>, /*VDEC_LD*/ + <0x16021800 0x800>, /*VDEC_TOP*/ + <0x16022000 0x1000>, /*VDEC_CM*/ + <0x16023000 0x1000>, /*VDEC_AD*/ + <0x16024000 0x1000>, /*VDEC_AV*/ + <0x16025000 0x1000>, /*VDEC_PP*/ + <0x16026800 0x800>, /*VP8_VD*/ + <0x16027000 0x800>, /*VP6_VD*/ + <0x16027800 0x800>, /*VP8_VL*/ + <0x16028400 0x400>; /*VP9_VD*/ + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; + iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, + <&iommu M4U_PORT_HW_VDEC_PP_EXT>, + <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>, + <&iommu M4U_PORT_HW_VDEC_UFO_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; + mediatek,vpu = <&vpu>; + mediatek,vdecsys = <&vdecsys>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; + clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, + <&topckgen CLK_TOP_UNIVPLL_D2>, + <&topckgen CLK_TOP_CCI400_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>, + <&topckgen CLK_TOP_VCODECPLL>, + <&apmixedsys CLK_APMIXED_VENCPLL>, + <&topckgen CLK_TOP_VENC_LT_SEL>, + <&topckgen CLK_TOP_VCODECPLL_370P5>; + clock-names = "vcodecpll", + "univpll_d2", + "clk_cci400_sel", + "vdec_sel", + "vdecpll", + "vencpll", + "venc_lt_sel", + "vdec_bus_clk_src"; + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>, + <&topckgen CLK_TOP_CCI400_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>, + <&apmixedsys CLK_APMIXED_VCODECPLL>, + <&apmixedsys CLK_APMIXED_VENCPLL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>, + <&topckgen CLK_TOP_UNIVPLL_D2>, + <&topckgen CLK_TOP_VCODECPLL>; + assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml new file mode 100644 index 000000000000..a2051b31fa29 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,vcodec-encoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Video Encode Accelerator + +maintainers: + - Yunfei Dong <yunfei.dong@mediatek.com> + +description: |+ + Mediatek Video Encode is the video encode hardware present in Mediatek + SoCs which supports high resolution encoding functionalities. + +properties: + compatible: + enum: + - mediatek,mt8173-vcodec-enc-vp8 + - mediatek,mt8173-vcodec-enc + - mediatek,mt8183-vcodec-enc + - mediatek,mt8188-vcodec-enc + - mediatek,mt8192-vcodec-enc + - mediatek,mt8195-vcodec-enc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + assigned-clocks: true + + assigned-clock-parents: true + + iommus: + minItems: 1 + maxItems: 32 + description: | + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + mediatek,vpu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Describes point to vpu. + + mediatek,scp: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Describes point to scp. + + power-domains: + maxItems: 1 + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - iommus + - assigned-clocks + - assigned-clock-parents + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8183-vcodec-enc + - mediatek,mt8188-vcodec-enc + - mediatek,mt8192-vcodec-enc + - mediatek,mt8195-vcodec-enc + + then: + required: + - mediatek,scp + + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8173-vcodec-enc-vp8 + - mediatek,mt8173-vcodec-enc + + then: + required: + - mediatek,vpu + + - if: + properties: + compatible: + enum: + - mediatek,mt8173-vcodec-enc + - mediatek,mt8188-vcodec-enc + - mediatek,mt8192-vcodec-enc + - mediatek,mt8195-vcodec-enc + + then: + properties: + clock: + items: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: venc_sel + else: # for vp8 hw encoder + properties: + clock: + items: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: venc_lt_sel + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/memory/mt8173-larb-port.h> + #include <dt-bindings/interrupt-controller/irq.h> + + vcodec_enc_avc: vcodec@18002000 { + compatible = "mediatek,mt8173-vcodec-enc"; + reg = <0x18002000 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; + iommus = <&iommu M4U_PORT_VENC_RCPU>, + <&iommu M4U_PORT_VENC_REC>, + <&iommu M4U_PORT_VENC_BSDMA>, + <&iommu M4U_PORT_VENC_SV_COMV>, + <&iommu M4U_PORT_VENC_RD_COMV>, + <&iommu M4U_PORT_VENC_CUR_LUMA>, + <&iommu M4U_PORT_VENC_CUR_CHROMA>, + <&iommu M4U_PORT_VENC_REF_LUMA>, + <&iommu M4U_PORT_VENC_REF_CHROMA>, + <&iommu M4U_PORT_VENC_NBM_RDMA>, + <&iommu M4U_PORT_VENC_NBM_WDMA>; + mediatek,vpu = <&vpu>; + clocks = <&topckgen CLK_TOP_VENC_SEL>; + clock-names = "venc_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>; + }; + + vcodec_enc_vp8: vcodec@19002000 { + compatible = "mediatek,mt8173-vcodec-enc-vp8"; + reg = <0x19002000 0x1000>; /* VENC_LT_SYS */ + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>; + iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>, + <&iommu M4U_PORT_VENC_REC_FRM_SET2>, + <&iommu M4U_PORT_VENC_BSDMA_SET2>, + <&iommu M4U_PORT_VENC_SV_COMA_SET2>, + <&iommu M4U_PORT_VENC_RD_COMA_SET2>, + <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>, + <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>, + <&iommu M4U_PORT_VENC_REF_LUMA_SET2>, + <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>; + mediatek,vpu = <&vpu>; + clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "venc_lt_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml new file mode 100644 index 000000000000..a500a585c692 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml @@ -0,0 +1,268 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Video Decode Accelerator With Multi Hardware + +maintainers: + - Yunfei Dong <yunfei.dong@mediatek.com> + +description: | + Mediatek Video Decode is the video decode hardware present in Mediatek + SoCs which supports high resolution decoding functionalities. Required + parent and child device node. + + About the Decoder Hardware Block Diagram, please check below: + + +------------------------------------------------+-------------------------------------+ + | | | + | input -> lat soc HW -> lat HW -> lat buffer --|--> lat buffer -> core HW -> output | + | || || | || | + +------------||-------------||-------------------+---------------------||--------------+ + || lat || | core workqueue <parent> + -------------||-------------||-------------------|---------------------||--------------- + ||<------------||----------------HW index---------------->|| <child> + \/ \/ \/ + +-------------------------------------------------------------+ + | enable/disable | + | clk power irq iommu | + | (lat/lat soc/core0/core1) | + +-------------------------------------------------------------+ + + As above, there are parent and child devices, child mean each hardware. The child device + controls the information of each hardware independent which include clk/power/irq. + + There are two workqueues in parent device: lat workqueue and core workqueue. They are used + to lat and core hardware decoder. Lat workqueue need to get input bitstream and lat buffer, + then enable lat to decode, writing the result to lat buffer, dislabe hardware when lat decode + done. Core workqueue need to get lat buffer and output buffer, then enable core to decode, + writing the result to output buffer, disable hardware when core decode done. These two + hardwares will decode each frame cyclically. + + For the smi common may not the same for each hardware, can't combine all hardware in one node, + or leading to iommu fault when access dram data. + + Lat soc is a hardware which is related with some larb(local arbiter) ports. For mt8195 + platform, there are some ports like RDMA, UFO in lat soc larb, need to enable its power and + clock when lat start to work, don't have interrupt. + + mt8195: lat soc HW + lat HW + core HW + mt8192: lat HW + core HW + +properties: + compatible: + enum: + - mediatek,mt8192-vcodec-dec + - mediatek,mt8186-vcodec-dec + - mediatek,mt8188-vcodec-dec + - mediatek,mt8195-vcodec-dec + + reg: + minItems: 1 + items: + - description: VDEC_SYS register space + - description: VDEC_RACING_CTRL register space + + iommus: + minItems: 1 + maxItems: 32 + description: | + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + mediatek,scp: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + The node of system control processor (SCP), using + the remoteproc & rpmsg framework. + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + +# Required child node: +patternProperties: + '^video-codec@[0-9a-f]+$': + type: object + + properties: + compatible: + enum: + - mediatek,mtk-vcodec-core + - mediatek,mtk-vcodec-lat + - mediatek,mtk-vcodec-lat-soc + + reg: + maxItems: 1 + description: VDEC_MISC register space + + interrupts: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 32 + description: | + List of the hardware port in respective IOMMU block for current Socs. + Refer to bindings/iommu/mediatek,iommu.yaml. + + clocks: + minItems: 4 + maxItems: 5 + + clock-names: + minItems: 4 + maxItems: 5 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + power-domains: + maxItems: 1 + + required: + - compatible + - reg + - iommus + - clocks + - clock-names + - assigned-clocks + - assigned-clock-parents + - power-domains + + additionalProperties: false + +required: + - compatible + - reg + - iommus + - mediatek,scp + - ranges + +if: + properties: + compatible: + contains: + enum: + - mediatek,mtk-vcodec-core + - mediatek,mtk-vcodec-lat + +then: + required: + - interrupts + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8192-vcodec-dec + then: + properties: + clock-names: + items: + - const: sel + - const: soc-vdec + - const: soc-lat + - const: vdec + - const: top + + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8195-vcodec-dec + then: + properties: + clock-names: + items: + - const: sel + - const: vdec + - const: lat + - const: top + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/mt8192-larb-port.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt8192-clk.h> + #include <dt-bindings/power/mt8192-power.h> + + bus@16000000 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0x16000000 0x16000000 0 0x40000>; + + video-codec@16000000 { + compatible = "mediatek,mt8192-vcodec-dec"; + mediatek,scp = <&scp>; + iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0x16000000 0 0x40000>; + reg = <0 0x16000000 0 0x1000>; /* VDEC_SYS */ + video-codec@10000 { + compatible = "mediatek,mtk-vcodec-lat"; + reg = <0 0x10000 0 0x800>; + interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>, + <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>; + clocks = <&topckgen CLK_TOP_VDEC_SEL>, + <&vdecsys_soc CLK_VDEC_SOC_VDEC>, + <&vdecsys_soc CLK_VDEC_SOC_LAT>, + <&vdecsys_soc CLK_VDEC_SOC_LARB1>, + <&topckgen CLK_TOP_MAINPLL_D4>; + clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top"; + assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>; + power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>; + }; + + video-codec@25000 { + compatible = "mediatek,mtk-vcodec-core"; + reg = <0 0x25000 0 0x1000>; + interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>; + iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>, + <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>; + clocks = <&topckgen CLK_TOP_VDEC_SEL>, + <&vdecsys CLK_VDEC_VDEC>, + <&vdecsys CLK_VDEC_LAT>, + <&vdecsys CLK_VDEC_LARB1>, + <&topckgen CLK_TOP_MAINPLL_D4>; + clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top"; + assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>; + power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt deleted file mode 100644 index 044b11913c49..000000000000 --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Mediatek JPEG Decoder - -Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs - -Required properties: -- compatible : must be one of the following string: - "mediatek,mt8173-jpgdec" - "mediatek,mt7623-jpgdec", "mediatek,mt2701-jpgdec" - "mediatek,mt2701-jpgdec" -- reg : physical base address of the jpeg decoder registers and length of - memory mapped region. -- interrupts : interrupt number to the interrupt controller. -- clocks: device clocks, see - Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: must contain "jpgdec-smi" and "jpgdec". -- power-domains: a phandle to the power domain, see - Documentation/devicetree/bindings/power/power_domain.txt for details. -- mediatek,larb: must contain the local arbiters in the current Socs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt - for details. -- iommus: should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt - for details. - -Example: - jpegdec: jpegdec@15004000 { - compatible = "mediatek,mt2701-jpgdec"; - reg = <0 0x15004000 0 0x1000>; - interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; - clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, - <&imgsys CLK_IMG_JPGDEC>; - clock-names = "jpgdec-smi", - "jpgdec"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; - iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, - <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; - }; diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml new file mode 100644 index 000000000000..cfabf360f278 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek-jpeg-decoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek JPEG Decoder + +maintainers: + - Xia Jiang <xia.jiang@mediatek.com> + +description: |- + Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt8173-jpgdec + - mediatek,mt2701-jpgdec + - items: + - enum: + - mediatek,mt7623-jpgdec + - mediatek,mt8188-jpgdec + - const: mediatek,mt2701-jpgdec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + minItems: 2 + + clock-names: + items: + - const: jpgdec-smi + - const: jpgdec + + power-domains: + maxItems: 1 + + iommus: + maxItems: 2 + description: | + Points to the respective IOMMU block with master port as argument, see + Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + Ports are according to the HW. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/mt2701-larb-port.h> + #include <dt-bindings/power/mt2701-power.h> + jpegdec: jpegdec@15004000 { + compatible = "mediatek,mt2701-jpgdec"; + reg = <0x15004000 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, + <&imgsys CLK_IMG_JPGDEC>; + clock-names = "jpgdec-smi", + "jpgdec"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml new file mode 100644 index 000000000000..37800e1908cc --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek-jpeg-encoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek JPEG Encoder + +maintainers: + - Xia Jiang <xia.jiang@mediatek.com> + +description: |- + MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs + +properties: + compatible: + items: + - enum: + - mediatek,mt2701-jpgenc + - mediatek,mt8183-jpgenc + - mediatek,mt8186-jpgenc + - mediatek,mt8188-jpgenc + - const: mediatek,mtk-jpgenc + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: jpgenc + + power-domains: + maxItems: 1 + + iommus: + maxItems: 2 + description: | + Points to the respective IOMMU block with master port as argument, see + Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + Ports are according to the HW. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/mt2701-larb-port.h> + #include <dt-bindings/power/mt2701-power.h> + jpegenc: jpegenc@1500a000 { + compatible = "mediatek,mt2701-jpgenc", + "mediatek,mtk-jpgenc"; + reg = <0x1500a000 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_VENC>; + clock-names = "jpgenc"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>, + <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt index 0d03e3ae2be2..53ef26e2c857 100644 --- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt +++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt @@ -25,10 +25,7 @@ Required properties (DMA function blocks, child node): "mediatek,mt8173-mdp-wdma" "mediatek,mt8173-mdp-wrot" - iommus: should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt - for details. -- mediatek,larb: must contain the local arbiters in the current Socs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. Example: @@ -40,7 +37,6 @@ Example: <&mmsys CLK_MM_MUTEX_32K>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_RDMA0>; - mediatek,larb = <&larb0>; mediatek,vpu = <&vpu>; }; @@ -51,7 +47,6 @@ Example: <&mmsys CLK_MM_MUTEX_32K>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_RDMA1>; - mediatek,larb = <&larb4>; }; mdp_rsz0: rsz@14003000 { @@ -81,7 +76,6 @@ Example: clocks = <&mmsys CLK_MM_MDP_WDMA>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WDMA>; - mediatek,larb = <&larb0>; }; mdp_wrot0: wrot@14007000 { @@ -90,7 +84,6 @@ Example: clocks = <&mmsys CLK_MM_MDP_WROT0>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WROT0>; - mediatek,larb = <&larb0>; }; mdp_wrot1: wrot@14008000 { @@ -99,5 +92,4 @@ Example: clocks = <&mmsys CLK_MM_MDP_WROT1>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WROT1>; - mediatek,larb = <&larb4>; }; diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt deleted file mode 100644 index b6b5dde6abd8..000000000000 --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt +++ /dev/null @@ -1,121 +0,0 @@ -Mediatek Video Codec - -Mediatek Video Codec is the video codec hw present in Mediatek SoCs which -supports high resolution encoding and decoding functionalities. - -Required properties: -- compatible : "mediatek,mt8173-vcodec-enc" for encoder - "mediatek,mt8173-vcodec-dec" for decoder. -- reg : Physical base address of the video codec registers and length of - memory mapped region. -- interrupts : interrupt number to the cpu. -- mediatek,larb : must contain the local arbiters in the current Socs. -- clocks : list of clock specifiers, corresponding to entries in - the clock-names property. -- clock-names: encoder must contain "venc_sel_src", "venc_sel",, - "venc_lt_sel_src", "venc_lt_sel", decoder must contain "vcodecpll", - "univpll_d2", "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll", - "venc_lt_sel", "vdec_bus_clk_src". -- iommus : should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt - for details. -- mediatek,vpu : the node of video processor unit - - -Example: - -vcodec_dec: vcodec@16000000 { - compatible = "mediatek,mt8173-vcodec-dec"; - reg = <0 0x16000000 0 0x100>, /*VDEC_SYS*/ - <0 0x16020000 0 0x1000>, /*VDEC_MISC*/ - <0 0x16021000 0 0x800>, /*VDEC_LD*/ - <0 0x16021800 0 0x800>, /*VDEC_TOP*/ - <0 0x16022000 0 0x1000>, /*VDEC_CM*/ - <0 0x16023000 0 0x1000>, /*VDEC_AD*/ - <0 0x16024000 0 0x1000>, /*VDEC_AV*/ - <0 0x16025000 0 0x1000>, /*VDEC_PP*/ - <0 0x16026800 0 0x800>, /*VP8_VD*/ - <0 0x16027000 0 0x800>, /*VP6_VD*/ - <0 0x16027800 0 0x800>, /*VP8_VL*/ - <0 0x16028400 0 0x400>; /*VP9_VD*/ - interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; - mediatek,larb = <&larb1>; - iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, - <&iommu M4U_PORT_HW_VDEC_PP_EXT>, - <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>, - <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>, - <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>, - <&iommu M4U_PORT_HW_VDEC_UFO_EXT>, - <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, - <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; - mediatek,vpu = <&vpu>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; - clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, - <&topckgen CLK_TOP_UNIVPLL_D2>, - <&topckgen CLK_TOP_CCI400_SEL>, - <&topckgen CLK_TOP_VDEC_SEL>, - <&topckgen CLK_TOP_VCODECPLL>, - <&apmixedsys CLK_APMIXED_VENCPLL>, - <&topckgen CLK_TOP_VENC_LT_SEL>, - <&topckgen CLK_TOP_VCODECPLL_370P5>; - clock-names = "vcodecpll", - "univpll_d2", - "clk_cci400_sel", - "vdec_sel", - "vdecpll", - "vencpll", - "venc_lt_sel", - "vdec_bus_clk_src"; - assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>, - <&topckgen CLK_TOP_CCI400_SEL>, - <&topckgen CLK_TOP_VDEC_SEL>, - <&apmixedsys CLK_APMIXED_VCODECPLL>, - <&apmixedsys CLK_APMIXED_VENCPLL>; - assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>, - <&topckgen CLK_TOP_UNIVPLL_D2>, - <&topckgen CLK_TOP_VCODECPLL>; - assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>; - }; - - vcodec_enc: vcodec@18002000 { - compatible = "mediatek,mt8173-vcodec-enc"; - reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/ - <0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/ - interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>; - mediatek,larb = <&larb3>, - <&larb5>; - iommus = <&iommu M4U_PORT_VENC_RCPU>, - <&iommu M4U_PORT_VENC_REC>, - <&iommu M4U_PORT_VENC_BSDMA>, - <&iommu M4U_PORT_VENC_SV_COMV>, - <&iommu M4U_PORT_VENC_RD_COMV>, - <&iommu M4U_PORT_VENC_CUR_LUMA>, - <&iommu M4U_PORT_VENC_CUR_CHROMA>, - <&iommu M4U_PORT_VENC_REF_LUMA>, - <&iommu M4U_PORT_VENC_REF_CHROMA>, - <&iommu M4U_PORT_VENC_NBM_RDMA>, - <&iommu M4U_PORT_VENC_NBM_WDMA>, - <&iommu M4U_PORT_VENC_RCPU_SET2>, - <&iommu M4U_PORT_VENC_REC_FRM_SET2>, - <&iommu M4U_PORT_VENC_BSDMA_SET2>, - <&iommu M4U_PORT_VENC_SV_COMA_SET2>, - <&iommu M4U_PORT_VENC_RD_COMA_SET2>, - <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>, - <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>, - <&iommu M4U_PORT_VENC_REF_LUMA_SET2>, - <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>; - mediatek,vpu = <&vpu>; - clocks = <&topckgen CLK_TOP_VENCPLL_D2>, - <&topckgen CLK_TOP_VENC_SEL>, - <&topckgen CLK_TOP_UNIVPLL1_D2>, - <&topckgen CLK_TOP_VENC_LT_SEL>; - clock-names = "venc_sel_src", - "venc_sel", - "venc_lt_sel_src", - "venc_lt_sel"; - assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>, - <&topckgen CLK_TOP_VENC_LT_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>, - <&topckgen CLK_TOP_UNIVPLL1_D2>; - }; diff --git a/Documentation/devicetree/bindings/media/meson-ir.txt b/Documentation/devicetree/bindings/media/meson-ir.txt deleted file mode 100644 index efd9d29a8f10..000000000000 --- a/Documentation/devicetree/bindings/media/meson-ir.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Amlogic Meson IR remote control receiver - -Required properties: - - compatible : depending on the platform this should be one of: - - "amlogic,meson6-ir" - - "amlogic,meson8b-ir" - - "amlogic,meson-gxbb-ir" - - reg : physical base address and length of the device registers - - interrupts : a single specifier for the interrupt from the device - -Optional properties: - - linux,rc-map-name: see rc.txt file in the same directory. - -Example: - - ir-receiver@c8100480 { - compatible= "amlogic,meson6-ir"; - reg = <0xc8100480 0x20>; - interrupts = <0 15 1>; - }; diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml new file mode 100644 index 000000000000..b3a345fc6464 --- /dev/null +++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/microchip,csi2dc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip CSI2 Demux Controller (CSI2DC) + +maintainers: + - Eugen Hristev <eugen.hristev@microchip.com> + +description: + CSI2DC - Camera Serial Interface 2 Demux Controller + + CSI2DC is a hardware block that receives incoming data from either from an + IDI interface or from a parallel bus interface. + It filters IDI packets based on their data type and virtual channel + identifier, then converts the byte stream to a pixel stream into a cross + clock domain towards a parallel interface that can be read by a sensor + controller. + IDI interface is Synopsys proprietary. + CSI2DC can act a simple bypass bridge if the incoming data is coming from + a parallel interface. + + CSI2DC provides two pipes, one video pipe and one data pipe. Video pipe + is connected at the output to a sensor controller and the data pipe is + accessible as a DMA slave port to a DMA controller. + + CSI2DC supports a single 'port' node as a sink port with either Synopsys + 32-bit IDI interface or a parallel interface. + + CSI2DC supports one 'port' node as source port with parallel interface. + This is called video pipe. + This port has an 'endpoint' that can be connected to a sink port of another + controller (next in pipeline). + + CSI2DC also supports direct access to the data through AHB, via DMA channel, + called data pipe. + For data pipe to be available, a dma controller and a dma channel must be + referenced. + +properties: + compatible: + const: microchip,sama7g5-csi2dc + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + description: + CSI2DC must have two clocks to function correctly. One clock is the + peripheral clock for the inside functionality of the hardware block. + This is named 'pclk'. The second clock must be the cross domain clock, + in which CSI2DC will perform clock crossing. This clock must be fed + by the next controller in pipeline, which usually is a sensor controller. + Normally this clock should be given by this sensor controller who + is also a clock source. This clock is named 'scck', sensor controller clock. + items: + - const: pclk + - const: scck + + dmas: + maxItems: 1 + + dma-names: + const: rx + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing the input port. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + description: Endpoint connected to input device + + properties: + bus-type: + enum: [4, 5, 6] + default: 4 + + bus-width: + enum: [8, 9, 10, 11, 12, 13, 14] + default: 14 + + clock-noncontinuous: + type: boolean + description: + Presence of this boolean property decides whether clock is + continuous or noncontinuous. + + remote-endpoint: true + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Output port node, single endpoint describing the output port. + + properties: + endpoint: + unevaluatedProperties: false + $ref: video-interfaces.yaml# + description: Endpoint connected to output device + + properties: + bus-type: + enum: [5, 6] + default: 5 + + bus-width: + enum: [8, 9, 10, 11, 12, 13, 14] + default: 14 + + remote-endpoint: true + + required: + - port@0 + - port@1 + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - ports + +examples: + # Example for connecting to a parallel sensor controller block (video pipe) + # and the input is received from Synopsys IDI interface + - | + csi2dc@e1404000 { + compatible = "microchip,sama7g5-csi2dc"; + reg = <0xe1404000 0x500>; + clocks = <&pclk>, <&scck>; + clock-names = "pclk", "scck"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; /* must be 0, first child port */ + csi2dc_in: endpoint { /* input from IDI interface */ + bus-type = <4>; /* MIPI CSI2 D-PHY */ + remote-endpoint = <&csi2host_out>; + }; + }; + + port@1 { + reg = <1>; /* must be 1, second child port */ + csi2dc_out: endpoint { + remote-endpoint = <&xisc_in>; /* output to sensor controller */ + }; + }; + }; + }; + + # Example for connecting to a DMA master as an AHB slave + # and the input is received from Synopsys IDI interface + - | + #include <dt-bindings/dma/at91.h> + csi2dc@e1404000 { + compatible = "microchip,sama7g5-csi2dc"; + reg = <0xe1404000 0x500>; + clocks = <&pclk>, <&scck>; + clock-names = "pclk", "scck"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>; + dma-names = "rx"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; /* must be 0, first child port */ + csi2dc_input: endpoint { /* input from IDI interface */ + remote-endpoint = <&csi2host_out>; + }; + }; + + port@1 { + reg = <1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml new file mode 100644 index 000000000000..59b805ca47c5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hantro G1 VPU codec implemented on Microchip SAMA5D4 SoCs + +maintainers: + - Emil Velikov <emil.velikov@collabora.com> + +description: + Hantro G1 video decode accelerator present on Microchip SAMA5D4 SoCs. + +properties: + compatible: + const: microchip,sama5d4-vdec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + + vdec0: vdec@300000 { + compatible = "microchip,sama5d4-vdec"; + reg = <0x00300000 0x100000>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + }; diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml new file mode 100644 index 000000000000..25f5f79d40ce --- /dev/null +++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Microchip Technology, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/microchip,xisc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip eXtended Image Sensor Controller (XISC) + +maintainers: + - Eugen Hristev <eugen.hristev@microchip.com> + +description: | + The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the + Microchip AT91 SAM family of devices. + + The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video. + The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a + parallel sensor. + + The XISC provides one clock output that is used to clock the demuxer/bridge. + +properties: + compatible: + const: microchip,sama7g5-isc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: hclock + + '#clock-cells': + const: 0 + + clock-output-names: + const: isc-mck + + microchip,mipi-mode: + type: boolean + description: + As the XISC is usually connected to a demux/bridge, the XISC receives + the same type of input, however, it should be aware of the type of + signals received. The mipi-mode enables different internal handling + of the data and clock lines. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Input port node, single endpoint describing the input pad. + + properties: + endpoint: + $ref: video-interfaces.yaml# + + properties: + bus-type: + enum: [5, 6] + + remote-endpoint: true + + bus-width: + enum: [8, 9, 10, 11, 12, 14] + default: 12 + + hsync-active: + enum: [0, 1] + default: 1 + + vsync-active: + enum: [0, 1] + default: 1 + + pclk-sample: + enum: [0, 1] + default: 1 + + required: + - remote-endpoint + - bus-type + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - clock-output-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/media/video-interfaces.h> + + xisc: xisc@e1408000 { + compatible = "microchip,sama7g5-isc"; + reg = <0xe1408000 0x2000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>; + clock-names = "hclock"; + #clock-cells = <0>; + clock-output-names = "isc-mck"; + + port { + xisc_in: endpoint { + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; + remote-endpoint = <&csi2dc_out>; + hsync-active = <1>; + vsync-active = <1>; + bus-width = <12>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/nokia,n900-ir b/Documentation/devicetree/bindings/media/nokia,n900-ir deleted file mode 100644 index 13a18ce37dd1..000000000000 --- a/Documentation/devicetree/bindings/media/nokia,n900-ir +++ /dev/null @@ -1,20 +0,0 @@ -Device-Tree bindings for LIRC TX driver for Nokia N900(RX51) - -Required properties: - - compatible: should be "nokia,n900-ir". - - pwms: specifies PWM used for IR signal transmission. - -Example node: - - pwm9: dmtimer-pwm@9 { - compatible = "ti,omap-dmtimer-pwm"; - ti,timers = <&timer9>; - ti,clock-source = <0x00>; /* timer_sys_ck */ - #pwm-cells = <3>; - }; - - ir: n900-ir { - compatible = "nokia,n900-ir"; - - pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ - }; diff --git a/Documentation/devicetree/bindings/media/nuvoton,npcm-ece.yaml b/Documentation/devicetree/bindings/media/nuvoton,npcm-ece.yaml new file mode 100644 index 000000000000..b47468e54504 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nuvoton,npcm-ece.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nuvoton,npcm-ece.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Encoding Compression Engine + +maintainers: + - Joseph Liu <kwliu@nuvoton.com> + - Marvin Lin <kflin@nuvoton.com> + +description: | + Video Encoding Compression Engine (ECE) present on Nuvoton NPCM SoCs. + +properties: + compatible: + enum: + - nuvoton,npcm750-ece + - nuvoton,npcm845-ece + + reg: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> + + ece: video-codec@f0820000 { + compatible = "nuvoton,npcm750-ece"; + reg = <0xf0820000 0x2000>; + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_ECE>; + }; diff --git a/Documentation/devicetree/bindings/media/nuvoton,npcm-vcd.yaml b/Documentation/devicetree/bindings/media/nuvoton,npcm-vcd.yaml new file mode 100644 index 000000000000..c885f559d2e5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nuvoton,npcm-vcd.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nuvoton,npcm-vcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Video Capture/Differentiation Engine + +maintainers: + - Joseph Liu <kwliu@nuvoton.com> + - Marvin Lin <kflin@nuvoton.com> + +description: | + Video Capture/Differentiation Engine (VCD) present on Nuvoton NPCM SoCs. + +properties: + compatible: + enum: + - nuvoton,npcm750-vcd + - nuvoton,npcm845-vcd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + nuvoton,sysgcr: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to access GCR (Global Control Register) registers. + + nuvoton,sysgfxi: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to access GFXI (Graphics Core Information) registers. + + nuvoton,ece: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to access ECE (Encoding Compression Engine) registers. + + memory-region: + maxItems: 1 + description: + CMA pool to use for buffers allocation instead of the default CMA pool. + +required: + - compatible + - reg + - interrupts + - resets + - nuvoton,sysgcr + - nuvoton,sysgfxi + - nuvoton,ece + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> + + vcd: vcd@f0810000 { + compatible = "nuvoton,npcm750-vcd"; + reg = <0xf0810000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_VCD>; + nuvoton,sysgcr = <&gcr>; + nuvoton,sysgfxi = <&gfxi>; + nuvoton,ece = <&ece>; + }; diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt deleted file mode 100644 index 602169b8aa19..000000000000 --- a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt +++ /dev/null @@ -1,64 +0,0 @@ -NVIDIA Tegra Video Decoder Engine - -Required properties: -- compatible : Must contain one of the following values: - - "nvidia,tegra20-vde" - - "nvidia,tegra30-vde" - - "nvidia,tegra114-vde" - - "nvidia,tegra124-vde" - - "nvidia,tegra132-vde" -- reg : Must contain an entry for each entry in reg-names. -- reg-names : Must include the following entries: - - sxe - - bsev - - mbe - - ppe - - mce - - tfe - - ppb - - vdma - - frameid -- iram : Must contain phandle to the mmio-sram device node that represents - IRAM region used by VDE. -- interrupts : Must contain an entry for each entry in interrupt-names. -- interrupt-names : Must include the following entries: - - sync-token - - bsev - - sxe -- clocks : Must include the following entries: - - vde -- resets : Must contain an entry for each entry in reset-names. -- reset-names : Should include the following entries: - - vde - -Optional properties: -- resets : Must contain an entry for each entry in reset-names. -- reset-names : Must include the following entries: - - mc -- iommus: Must contain phandle to the IOMMU device node. - -Example: - -video-codec@6001a000 { - compatible = "nvidia,tegra20-vde"; - reg = <0x6001a000 0x1000 /* Syntax Engine */ - 0x6001b000 0x1000 /* Video Bitstream Engine */ - 0x6001c000 0x100 /* Macroblock Engine */ - 0x6001c200 0x100 /* Post-processing Engine */ - 0x6001c400 0x100 /* Motion Compensation Engine */ - 0x6001c600 0x100 /* Transform Engine */ - 0x6001c800 0x100 /* Pixel prediction block */ - 0x6001ca00 0x100 /* Video DMA */ - 0x6001d800 0x300 /* Video frame controls */>; - reg-names = "sxe", "bsev", "mbe", "ppe", "mce", - "tfe", "ppb", "vdma", "frameid"; - iram = <&vde_pool>; /* IRAM region */ - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */ - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */ - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ - interrupt-names = "sync-token", "bsev", "sxe"; - clocks = <&tegra_car TEGRA20_CLK_VDE>; - reset-names = "vde", "mc"; - resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>; - iommus = <&mc TEGRA_SWGROUP_VDE>; -}; diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml new file mode 100644 index 000000000000..4ecdee1be37e --- /dev/null +++ b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nvidia,tegra-vde.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Video Decoder Engine + +maintainers: + - Dmitry Osipenko <digetx@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - nvidia,tegra132-vde + - nvidia,tegra124-vde + - nvidia,tegra114-vde + - items: + - const: nvidia,tegra30-vde + - const: nvidia,tegra20-vde + - items: + - const: nvidia,tegra20-vde + + reg: + maxItems: 9 + + reg-names: + items: + - const: sxe + - const: bsev + - const: mbe + - const: ppe + - const: mce + - const: tfe + - const: ppb + - const: vdma + - const: frameid + + clocks: + maxItems: 1 + + resets: + maxItems: 2 + + reset-names: + items: + - const: vde + - const: mc + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: sync-token + - const: bsev + - const: sxe + + iommus: + maxItems: 1 + + iram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle of the SRAM MMIO node. + + operating-points-v2: + description: + Should contain freqs and voltages and opp-supported-hw property, + which is a bitfield indicating SoC speedo or process ID mask. + + power-domains: + maxItems: 1 + description: + Phandle to the SoC core power domain. + +required: + - compatible + - reg + - reg-names + - clocks + - resets + - reset-names + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + video-codec@6001a000 { + compatible = "nvidia,tegra20-vde"; + reg = <0x6001a000 0x1000>, /* Syntax Engine */ + <0x6001b000 0x1000>, /* Video Bitstream Engine */ + <0x6001c000 0x100>, /* Macroblock Engine */ + <0x6001c200 0x100>, /* Post-processing Engine */ + <0x6001c400 0x100>, /* Motion Compensation Engine */ + <0x6001c600 0x100>, /* Transform Engine */ + <0x6001c800 0x100>, /* Pixel prediction block */ + <0x6001ca00 0x100>, /* Video DMA */ + <0x6001d800 0x300>; /* Video frame controls */ + reg-names = "sxe", "bsev", "mbe", "ppe", "mce", + "tfe", "ppb", "vdma", "frameid"; + iram = <&iram>; /* IRAM MMIO region */ + interrupts = <0 9 4>, /* Sync token */ + <0 10 4>, /* BSE-V */ + <0 12 4>; /* SXE */ + interrupt-names = "sync-token", "bsev", "sxe"; + clocks = <&clk 61>; + reset-names = "vde", "mc"; + resets = <&rst 61>, <&mem 13>; + iommus = <&mem 15>; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>; + }; diff --git a/Documentation/devicetree/bindings/media/nxp,dw100.yaml b/Documentation/devicetree/bindings/media/nxp,dw100.yaml new file mode 100644 index 000000000000..21910ff0e1c3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,dw100.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nxp,dw100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP DW100 Dewarper core + +maintainers: + - Xavier Roumegue <xavier.roumegue@oss.nxp.com> + +description: |- + The Dewarp Engine provides high-performance dewarp processing for the + correction of the distortion that is introduced in images produced by fisheye + and wide angle lenses. It is implemented with a line/tile-cache based + architecture. With configurable address mapping look up tables and per tile + processing, it successfully generates a corrected output image. + The engine can be used to perform scaling, cropping and pixel format + conversion. + +properties: + compatible: + enum: + - nxp,imx8mp-dw100 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The AXI clock + - description: The AHB clock + + clock-names: + items: + - const: axi + - const: ahb + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/imx8mp-power.h> + + dewarp: dwe@32e30000 { + compatible = "nxp,imx8mp-dw100"; + reg = <0x32e30000 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "axi", "ahb"; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_DWE>; + }; diff --git a/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml new file mode 100644 index 000000000000..03a23a26c4f3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nxp,imx-mipi-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver + +maintainers: + - Rui Miguel Silva <rmfrfs@gmail.com> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: |- + The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2 + receiver IP core named CSIS. The IP core originates from Samsung, and may be + compatible with some of the Exynos4 and S5P SoCs. i.MX7 SoCs use CSIS version + 3.3, and i.MX8 SoCs use CSIS version 3.6.3. + + While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is + completely wrapped by the CSIS and doesn't expose a control interface of its + own. This binding thus covers both IP cores. + +properties: + compatible: + oneOf: + - enum: + - fsl,imx7-mipi-csi2 + - fsl,imx8mm-mipi-csi2 + - items: + - enum: + - fsl,imx8mp-mipi-csi2 + - const: fsl,imx8mm-mipi-csi2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + items: + - description: The peripheral clock (a.k.a. APB clock) + - description: The external clock (optionally used as the pixel clock) + - description: The MIPI D-PHY clock + - description: The AXI clock + + clock-names: + minItems: 3 + items: + - const: pclk + - const: wrap + - const: phy + - const: axi + + power-domains: + maxItems: 1 + + phy-supply: + description: The MIPI D-PHY digital power supply + + resets: + items: + - description: MIPI D-PHY slave reset + + clock-frequency: + description: The desired external clock ("wrap") frequency, in Hz + default: 166000000 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: + Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port node + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - ports + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx7-mipi-csi2 + then: + required: + - phy-supply + - resets + else: + properties: + clocks: + minItems: 4 + clock-names: + minItems: 4 + phy-supply: false + resets: false + +examples: + - | + #include <dt-bindings/clock/imx7d-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/reset/imx7-reset.h> + + mipi-csi@30750000 { + compatible = "fsl,imx7-mipi-csi2"; + reg = <0x30750000 0x10000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "pclk", "wrap", "phy"; + clock-frequency = <166000000>; + + power-domains = <&pgc_mipi_phy>; + phy-supply = <®_1p0d>; + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mipi_from_sensor: endpoint { + remote-endpoint = <&ov2680_to_mipi>; + data-lanes = <1>; + }; + }; + + port@1 { + reg = <1>; + + mipi_vc0_to_csi_mux: endpoint { + remote-endpoint = <&csi_mux_from_mipi_vc0>; + }; + }; + }; + }; + + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mipi-csi@32e30000 { + compatible = "fsl,imx8mm-mipi-csi2"; + reg = <0x32e30000 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <333000000>; + clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_CSI1_ROOT>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>; + clock-names = "pclk", "wrap", "phy", "axi"; + power-domains = <&mipi_pd>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + imx8mm_mipi_csi_in: endpoint { + remote-endpoint = <&imx477_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@1 { + reg = <1>; + + imx8mm_mipi_csi_out: endpoint { + remote-endpoint = <&csi_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml new file mode 100644 index 000000000000..326284e151f6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX7 and i.MX8 CSI bridge (CMOS Sensor Interface) + +maintainers: + - Rui Miguel Silva <rmfrfs@gmail.com> + +description: | + This is device node for the CMOS Sensor Interface (CSI) which enables the + chip to connect directly to external CMOS image sensors. + +properties: + compatible: + oneOf: + - enum: + - fsl,imx8mq-csi + - fsl,imx7-csi + - fsl,imx6ul-csi + - items: + - const: fsl,imx8mm-csi + - const: fsl,imx7-csi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mclk + + power-domains: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - port + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8mm-csi + then: + required: + - power-domains + +examples: + - | + #include <dt-bindings/clock/imx7d-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + csi: csi@30710000 { + compatible = "fsl,imx7-csi"; + reg = <0x30710000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>; + clock-names = "mclk"; + + port { + csi_from_csi_mux: endpoint { + remote-endpoint = <&csi_mux_to_csi>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml new file mode 100644 index 000000000000..e4665469a86c --- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nxp,imx8-isi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX8 Image Sensing Interface + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: | + The Image Sensing Interface (ISI) combines image processing pipelines with + DMA engines to process and capture frames originating from a variety of + sources. The inputs to the ISI go through Pixel Link interfaces, and their + number and nature is SoC-dependent. They cover both capture interfaces (MIPI + CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support. + +properties: + compatible: + enum: + - fsl,imx8mn-isi + - fsl,imx8mp-isi + - fsl,imx93-isi + + reg: + maxItems: 1 + + clocks: + items: + - description: The AXI clock + - description: The APB clock + # TODO: Check if the per-channel ipg_proc_clk clocks need to be specified + # as well, in case some SoCs have the ability to control them separately. + # This may be the case of the i.MX8[DQ]X(P) + + clock-names: + items: + - const: axi + - const: apb + + fsl,blk-ctrl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A phandle referencing the block control that contains the CSIS to ISI + gasket. + + interrupts: + description: Processing pipeline interrupts, one per pipeline + minItems: 1 + maxItems: 2 + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Ports represent the Pixel Link inputs to the ISI. Their number and + assignment are model-dependent. Each port shall have a single endpoint. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - fsl,blk-ctrl + - ports + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8mn-isi + - fsl,imx93-isi + then: + properties: + interrupts: + maxItems: 1 + ports: + properties: + port@0: + description: MIPI CSI-2 RX + required: + - port@0 + + - if: + properties: + compatible: + contains: + const: fsl,imx8mp-isi + then: + properties: + interrupts: + maxItems: 2 + ports: + properties: + port@0: + description: MIPI CSI-2 RX 0 + port@1: + description: MIPI CSI-2 RX 1 + required: + - port@0 + - port@1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mn-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/imx8mn-power.h> + + isi@32e20000 { + compatible = "fsl,imx8mn-isi"; + reg = <0x32e20000 0x100>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>; + clock-names = "axi", "apb"; + fsl,blk-ctrl = <&disp_blk_ctrl>; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_ISI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + isi_in: endpoint { + remote-endpoint = <&mipi_csi_out>; + }; + }; + }; + }; + + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + isi@32e00000 { + compatible = "fsl,imx8mp-isi"; + reg = <0x32e00000 0x4000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "axi", "apb"; + fsl,blk-ctrl = <&media_blk_ctrl>; + power-domains = <&mediamix_pd>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + isi_in_0: endpoint { + remote-endpoint = <&mipi_csi_0_out>; + }; + }; + + port@1 { + reg = <1>; + isi_in_1: endpoint { + remote-endpoint = <&mipi_csi_1_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml new file mode 100644 index 000000000000..3d9d1db37040 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX8QXP/QM JPEG decoder/encoder + +maintainers: + - Mirela Rabulea <mirela.rabulea@nxp.com> + +description: |- + The JPEG decoder/encoder present in iMX8QXP and iMX8QM SoCs is an + ISO/IEC 10918-1 JPEG standard compliant decoder/encoder, for Baseline + and Extended Sequential DCT modes. + +properties: + compatible: + oneOf: + - items: + enum: + - nxp,imx8qxp-jpgdec + - nxp,imx8qxp-jpgenc + - items: + - const: nxp,imx8qm-jpgdec + - const: nxp,imx8qxp-jpgdec + - items: + - const: nxp,imx8qm-jpgenc + - const: nxp,imx8qxp-jpgenc + + reg: + maxItems: 1 + + interrupts: + description: | + There are 4 slots available in the IP, which the driver may use + If a certain slot is used, it should have an associated interrupt + The interrupt with index i is assumed to be for slot i + minItems: 1 # At least one slot is needed by the driver + maxItems: 4 # The IP has 4 slots available for use + + power-domains: + description: + List of phandle and PM domain specifier as documented in + Documentation/devicetree/bindings/power/power_domain.txt + minItems: 2 # Wrapper and 1 slot + maxItems: 5 # Wrapper and 4 slots + +required: + - compatible + - reg + - interrupts + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/firmware/imx/rsrc.h> + + jpegdec: jpegdec@58400000 { + compatible = "nxp,imx8qxp-jpgdec"; + reg = <0x58400000 0x00050000 >; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>, + <&pd IMX_SC_R_MJPEG_DEC_S0>, + <&pd IMX_SC_R_MJPEG_DEC_S1>, + <&pd IMX_SC_R_MJPEG_DEC_S2>, + <&pd IMX_SC_R_MJPEG_DEC_S3>; + }; + + jpegenc: jpegenc@58450000 { + compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc"; + reg = <0x58450000 0x00050000 >; + interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>, + <&pd IMX_SC_R_MJPEG_ENC_S0>, + <&pd IMX_SC_R_MJPEG_ENC_S1>, + <&pd IMX_SC_R_MJPEG_ENC_S2>, + <&pd IMX_SC_R_MJPEG_ENC_S3>; + }; +... diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml new file mode 100644 index 000000000000..2a14e3b0e004 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MQ MIPI CSI-2 receiver + +maintainers: + - Martin Kepplinger <martin.kepplinger@puri.sm> + +description: |- + This binding covers the CSI-2 RX PHY and host controller included in the + NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the + input imaging devices. + +properties: + compatible: + enum: + - fsl,imx8mq-mipi-csi2 + + reg: + maxItems: 1 + + clocks: + items: + - description: core is the RX Controller Core Clock input. This clock + must be exactly equal to or faster than the receive + byteclock from the RX DPHY. + - description: esc is the Rx Escape Clock. This must be the same escape + clock that the RX DPHY receives. + - description: ui is the pixel clock (phy_ref up to 333Mhz). + See the reference manual for details. + + clock-names: + items: + - const: core + - const: esc + - const: ui + + power-domains: + maxItems: 1 + + resets: + items: + - description: CORE_RESET reset register bit definition + - description: PHY_REF_RESET reset register bit definition + - description: ESC_RESET reset register bit definition + + fsl,mipi-phy-gpr: + description: | + The phandle to the imx8mq syscon iomux-gpr with the register + for setting RX_ENABLE for the mipi receiver. + + The format should be as follows: + <gpr req_gpr> + gpr is the phandle to general purpose register node. + req_gpr is the gpr register offset of RX_ENABLE for the mipi phy. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: The 'gpr' is the phandle to general purpose register node. + - description: The 'req_gpr' is the gpr register offset containing + CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively. + maximum: 0xff + + interconnects: + maxItems: 1 + + interconnect-names: + const: dram + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port node + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + - resets + - fsl,mipi-phy-gpr + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/interconnect/imx8mq.h> + #include <dt-bindings/reset/imx8mq-reset.h> + + csi@30a70000 { + compatible = "fsl,imx8mq-mipi-csi2"; + reg = <0x30a70000 0x1000>; + clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, + <&clk IMX8MQ_CLK_CSI1_ESC>, + <&clk IMX8MQ_CLK_CSI1_PHY_REF>; + clock-names = "core", "esc", "ui"; + assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, + <&clk IMX8MQ_CLK_CSI1_PHY_REF>, + <&clk IMX8MQ_CLK_CSI1_ESC>; + assigned-clock-rates = <266000000>, <200000000>, <66000000>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, + <&clk IMX8MQ_SYS2_PLL_1000M>, + <&clk IMX8MQ_SYS1_PLL_800M>; + power-domains = <&pgc_mipi_csi1>; + resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>, + <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>, + <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>; + fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>; + interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>; + interconnect-names = "dram"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + imx8mm_mipi_csi_in: endpoint { + remote-endpoint = <&imx477_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@1 { + reg = <1>; + + imx8mm_mipi_csi_out: endpoint { + remote-endpoint = <&csi_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml index a2d1cd77c1e2..3d58f02b0c5d 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml @@ -2,10 +2,10 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Hantro G1/G2 VPU codecs implemented on i.MX8MQ SoCs +title: Hantro G1/G2 VPU codecs implemented on i.MX8M SoCs maintainers: - Philipp Zabel <p.zabel@pengutronix.de> @@ -15,33 +15,21 @@ description: properties: compatible: - const: nxp,imx8mq-vpu + oneOf: + - const: nxp,imx8mq-vpu + deprecated: true + - const: nxp,imx8mq-vpu-g1 + - const: nxp,imx8mq-vpu-g2 + - const: nxp,imx8mm-vpu-g1 reg: - maxItems: 3 - - reg-names: - items: - - const: g1 - - const: g2 - - const: ctrl + maxItems: 1 interrupts: - maxItems: 2 - - interrupt-names: - items: - - const: g1 - - const: g2 + maxItems: 1 clocks: - maxItems: 3 - - clock-names: - items: - - const: g1 - - const: g2 - - const: bus + maxItems: 1 power-domains: maxItems: 1 @@ -49,29 +37,33 @@ properties: required: - compatible - reg - - reg-names - interrupts - - interrupt-names - clocks - - clock-names + +additionalProperties: false examples: - | #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/power/imx8mq-power.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + vpu_g1: video-codec@38300000 { + compatible = "nxp,imx8mq-vpu-g1"; + reg = <0x38300000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>; + power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>; + }; + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/power/imx8mq-power.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - vpu: video-codec@38300000 { - compatible = "nxp,imx8mq-vpu"; - reg = <0x38300000 0x10000>, - <0x38310000 0x10000>, - <0x38320000 0x10000>; - reg-names = "g1", "g2", "ctrl"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "g1", "g2"; - clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, - <&clk IMX8MQ_CLK_VPU_G2_ROOT>, - <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; - clock-names = "g1", "g2", "bus"; - power-domains = <&pgc_vpu>; + vpu_g2: video-codec@38300000 { + compatible = "nxp,imx8mq-vpu-g2"; + reg = <0x38310000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>; + power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>; }; diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt deleted file mode 100644 index 09eb6ed99114..000000000000 --- a/Documentation/devicetree/bindings/media/qcom,camss.txt +++ /dev/null @@ -1,229 +0,0 @@ -Qualcomm Camera Subsystem - -* Properties - -- compatible: - Usage: required - Value type: <stringlist> - Definition: Should contain one of: - - "qcom,msm8916-camss" - - "qcom,msm8996-camss" -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: Register ranges as listed in the reg-names property. -- reg-names: - Usage: required - Value type: <stringlist> - Definition: Should contain the following entries: - - "csiphy0" - - "csiphy0_clk_mux" - - "csiphy1" - - "csiphy1_clk_mux" - - "csiphy2" (8996 only) - - "csiphy2_clk_mux" (8996 only) - - "csid0" - - "csid1" - - "csid2" (8996 only) - - "csid3" (8996 only) - - "ispif" - - "csi_clk_mux" - - "vfe0" - - "vfe1" (8996 only) -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: Interrupts as listed in the interrupt-names property. -- interrupt-names: - Usage: required - Value type: <stringlist> - Definition: Should contain the following entries: - - "csiphy0" - - "csiphy1" - - "csiphy2" (8996 only) - - "csid0" - - "csid1" - - "csid2" (8996 only) - - "csid3" (8996 only) - - "ispif" - - "vfe0" - - "vfe1" (8996 only) -- power-domains: - Usage: required - Value type: <prop-encoded-array> - Definition: A phandle and power domain specifier pairs to the - power domain which is responsible for collapsing - and restoring power to the peripheral. -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: A list of phandle and clock specifier pairs as listed - in clock-names property. -- clock-names: - Usage: required - Value type: <stringlist> - Definition: Should contain the following entries: - - "top_ahb" - - "ispif_ahb" - - "csiphy0_timer" - - "csiphy1_timer" - - "csiphy2_timer" (8996 only) - - "csi0_ahb" - - "csi0" - - "csi0_phy" - - "csi0_pix" - - "csi0_rdi" - - "csi1_ahb" - - "csi1" - - "csi1_phy" - - "csi1_pix" - - "csi1_rdi" - - "csi2_ahb" (8996 only) - - "csi2" (8996 only) - - "csi2_phy" (8996 only) - - "csi2_pix" (8996 only) - - "csi2_rdi" (8996 only) - - "csi3_ahb" (8996 only) - - "csi3" (8996 only) - - "csi3_phy" (8996 only) - - "csi3_pix" (8996 only) - - "csi3_rdi" (8996 only) - - "ahb" - - "vfe0" - - "csi_vfe0" - - "vfe0_ahb", (8996 only) - - "vfe0_stream", (8996 only) - - "vfe1", (8996 only) - - "csi_vfe1", (8996 only) - - "vfe1_ahb", (8996 only) - - "vfe1_stream", (8996 only) - - "vfe_ahb" - - "vfe_axi" -- vdda-supply: - Usage: required - Value type: <phandle> - Definition: A phandle to voltage supply for CSI2. -- iommus: - Usage: required - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. - -* Nodes - -- ports: - Usage: required - Definition: As described in video-interfaces.txt in same directory. - Properties: - - reg: - Usage: required - Value type: <u32> - Definition: Selects CSI2 PHY interface - PHY0, PHY1 - or PHY2 (8996 only) - Endpoint node properties: - - clock-lanes: - Usage: required - Value type: <u32> - Definition: The physical clock lane index. On 8916 - the value must always be <1> as the physical - clock lane is lane 1. On 8996 the value must - always be <7> as the hardware supports D-PHY - and C-PHY, indexes are in a common set and - D-PHY physical clock lane is labeled as 7. - - data-lanes: - Usage: required - Value type: <prop-encoded-array> - Definition: An array of physical data lanes indexes. - Position of an entry determines the logical - lane number, while the value of an entry - indicates physical lane index. Lane swapping - is supported. Physical lane indexes for - 8916: 0, 2, 3, 4; for 8996: 0, 1, 2, 3. - -* An Example - - camss: camss@1b00000 { - compatible = "qcom,msm8916-camss"; - reg = <0x1b0ac00 0x200>, - <0x1b00030 0x4>, - <0x1b0b000 0x200>, - <0x1b00038 0x4>, - <0x1b08000 0x100>, - <0x1b08400 0x100>, - <0x1b0a000 0x500>, - <0x1b00020 0x10>, - <0x1b10000 0x1000>; - reg-names = "csiphy0", - "csiphy0_clk_mux", - "csiphy1", - "csiphy1_clk_mux", - "csid0", - "csid1", - "ispif", - "csi_clk_mux", - "vfe0"; - interrupts = <GIC_SPI 78 0>, - <GIC_SPI 79 0>, - <GIC_SPI 51 0>, - <GIC_SPI 52 0>, - <GIC_SPI 55 0>, - <GIC_SPI 57 0>; - interrupt-names = "csiphy0", - "csiphy1", - "csid0", - "csid1", - "ispif", - "vfe0"; - power-domains = <&gcc VFE_GDSC>; - clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, - <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, - <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, - <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, - <&gcc GCC_CAMSS_CSI0_AHB_CLK>, - <&gcc GCC_CAMSS_CSI0_CLK>, - <&gcc GCC_CAMSS_CSI0PHY_CLK>, - <&gcc GCC_CAMSS_CSI0PIX_CLK>, - <&gcc GCC_CAMSS_CSI0RDI_CLK>, - <&gcc GCC_CAMSS_CSI1_AHB_CLK>, - <&gcc GCC_CAMSS_CSI1_CLK>, - <&gcc GCC_CAMSS_CSI1PHY_CLK>, - <&gcc GCC_CAMSS_CSI1PIX_CLK>, - <&gcc GCC_CAMSS_CSI1RDI_CLK>, - <&gcc GCC_CAMSS_AHB_CLK>, - <&gcc GCC_CAMSS_VFE0_CLK>, - <&gcc GCC_CAMSS_CSI_VFE0_CLK>, - <&gcc GCC_CAMSS_VFE_AHB_CLK>, - <&gcc GCC_CAMSS_VFE_AXI_CLK>; - clock-names = "top_ahb", - "ispif_ahb", - "csiphy0_timer", - "csiphy1_timer", - "csi0_ahb", - "csi0", - "csi0_phy", - "csi0_pix", - "csi0_rdi", - "csi1_ahb", - "csi1", - "csi1_phy", - "csi1_pix", - "csi1_rdi", - "ahb", - "vfe0", - "csi_vfe0", - "vfe_ahb", - "vfe_axi"; - vdda-supply = <&pm8916_l2>; - iommus = <&apps_iommu 3>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - csiphy0_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 2>; - remote-endpoint = <&ov5645_ep>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml new file mode 100644 index 000000000000..9cc0a968a401 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml @@ -0,0 +1,246 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + - Todor Tomov <todor.too@gmail.com> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,msm8916-camss + + clocks: + minItems: 19 + maxItems: 19 + + clock-names: + items: + - const: top_ahb + - const: ispif_ahb + - const: csiphy0_timer + - const: csiphy1_timer + - const: csi0_ahb + - const: csi0 + - const: csi0_phy + - const: csi0_pix + - const: csi0_rdi + - const: csi1_ahb + - const: csi1 + - const: csi1_phy + - const: csi1_pix + - const: csi1_rdi + - const: ahb + - const: vfe0 + - const: csi_vfe0 + - const: vfe_ahb + - const: vfe_axi + + interrupts: + minItems: 6 + maxItems: 6 + + interrupt-names: + items: + - const: csiphy0 + - const: csiphy1 + - const: csid0 + - const: csid1 + - const: ispif + - const: vfe0 + + iommus: + maxItems: 1 + + power-domains: + items: + - description: VFE GDSC - Video Front End, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: + An array of physical data lanes indexes. + Position of an entry determines the logical + lane number, while the value of an entry + indicates physical lane index. Lane swapping + is supported. Physical lane indexes; + 0, 2, 3, 4. + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + reg: + minItems: 9 + maxItems: 9 + + reg-names: + items: + - const: csiphy0 + - const: csiphy0_clk_mux + - const: csiphy1 + - const: csiphy1_clk_mux + - const: csid0 + - const: csid1 + - const: ispif + - const: csi_clk_mux + - const: vfe0 + + vdda-supply: + description: + Definition of the regulator used as analog power supply. + +required: + - clock-names + - clocks + - compatible + - interrupt-names + - interrupts + - iommus + - power-domains + - reg + - reg-names + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + + camss: camss@1b0ac00 { + compatible = "qcom,msm8916-camss"; + + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI0_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0_CLK>, + <&gcc GCC_CAMSS_CSI0PHY_CLK>, + <&gcc GCC_CAMSS_CSI0PIX_CLK>, + <&gcc GCC_CAMSS_CSI0RDI_CLK>, + <&gcc GCC_CAMSS_CSI1_AHB_CLK>, + <&gcc GCC_CAMSS_CSI1_CLK>, + <&gcc GCC_CAMSS_CSI1PHY_CLK>, + <&gcc GCC_CAMSS_CSI1PIX_CLK>, + <&gcc GCC_CAMSS_CSI1RDI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_CLK>, + <&gcc GCC_CAMSS_CSI_VFE0_CLK>, + <&gcc GCC_CAMSS_VFE_AHB_CLK>, + <&gcc GCC_CAMSS_VFE_AXI_CLK>; + + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe_ahb", + "vfe_axi"; + + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "csiphy0", + "csiphy1", + "csid0", + "csid1", + "ispif", + "vfe0"; + + iommus = <&apps_iommu 3>; + + power-domains = <&gcc VFE_GDSC>; + + reg = <0x01b0ac00 0x200>, + <0x01b00030 0x4>, + <0x01b0b000 0x200>, + <0x01b00038 0x4>, + <0x01b08000 0x100>, + <0x01b08400 0x100>, + <0x01b0a000 0x500>, + <0x01b00020 0x10>, + <0x01b10000 0x1000>; + + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csid0", + "csid1", + "ispif", + "csi_clk_mux", + "vfe0"; + + vdda-supply = <®_2v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + + }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml index f9606df02d70..9410f13ca97c 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,msm8916-venus.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,msm8916-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm MSM8916 Venus video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -14,16 +13,13 @@ description: | The Venus IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,msm8916-venus - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - power-domains: maxItems: 1 @@ -39,15 +35,12 @@ properties: iommus: maxItems: 1 - memory-region: - maxItems: 1 - video-decoder: type: object properties: compatible: - const: "venus-decoder" + const: venus-decoder required: - compatible @@ -59,61 +52,43 @@ properties: properties: compatible: - const: "venus-encoder" + const: venus-encoder required: - compatible additionalProperties: false - video-firmware: - type: object - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - interrupts - - power-domains - - clocks - - clock-names - iommus - - memory-region - video-decoder - video-encoder +unevaluatedProperties: false + examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,gcc-msm8916.h> - - video-codec@1d00000 { - compatible = "qcom,msm8916-venus"; - reg = <0x01d00000 0xff000>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, - <&gcc GCC_VENUS0_AHB_CLK>, - <&gcc GCC_VENUS0_AXI_CLK>; - clock-names = "core", "iface", "bus"; - power-domains = <&gcc VENUS_GDSC>; - iommus = <&apps_iommu 5>; - memory-region = <&venus_mem>; - - video-decoder { - compatible = "venus-decoder"; - }; - - video-encoder { - compatible = "venus-encoder"; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + + video-codec@1d00000 { + compatible = "qcom,msm8916-venus"; + reg = <0x01d00000 0xff000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, + <&gcc GCC_VENUS0_AHB_CLK>, + <&gcc GCC_VENUS0_AXI_CLK>; + clock-names = "core", "iface", "bus"; + power-domains = <&gcc VENUS_GDSC>; + iommus = <&apps_iommu 5>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml new file mode 100644 index 000000000000..5cb0e337ea6e --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml @@ -0,0 +1,367 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + - Todor Tomov <todor.too@gmail.com> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,msm8996-camss + + clocks: + minItems: 36 + maxItems: 36 + + clock-names: + items: + - const: top_ahb + - const: ispif_ahb + - const: csiphy0_timer + - const: csiphy1_timer + - const: csiphy2_timer + - const: csi0_ahb + - const: csi0 + - const: csi0_phy + - const: csi0_pix + - const: csi0_rdi + - const: csi1_ahb + - const: csi1 + - const: csi1_phy + - const: csi1_pix + - const: csi1_rdi + - const: csi2_ahb + - const: csi2 + - const: csi2_phy + - const: csi2_pix + - const: csi2_rdi + - const: csi3_ahb + - const: csi3 + - const: csi3_phy + - const: csi3_pix + - const: csi3_rdi + - const: ahb + - const: vfe0 + - const: csi_vfe0 + - const: vfe0_ahb + - const: vfe0_stream + - const: vfe1 + - const: csi_vfe1 + - const: vfe1_ahb + - const: vfe1_stream + - const: vfe_ahb + - const: vfe_axi + + interrupts: + minItems: 10 + maxItems: 10 + + interrupt-names: + items: + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid3 + - const: ispif + - const: vfe0 + - const: vfe1 + + iommus: + maxItems: 4 + + power-domains: + items: + - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller. + - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: + An array of physical data lanes indexes. + Position of an entry determines the logical + lane number, while the value of an entry + indicates physical lane index. Lane swapping + is supported. Physical lane indexes are; + 0, 1, 2, 3 + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + reg: + minItems: 14 + maxItems: 14 + + reg-names: + items: + - const: csiphy0 + - const: csiphy0_clk_mux + - const: csiphy1 + - const: csiphy1_clk_mux + - const: csiphy2 + - const: csiphy2_clk_mux + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid3 + - const: ispif + - const: csi_clk_mux + - const: vfe0 + - const: vfe1 + + vdda-supply: + description: + Definition of the regulator used as analog power supply. + +required: + - clock-names + - clocks + - compatible + - interrupt-names + - interrupts + - iommus + - power-domains + - reg + - reg-names + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + #include <dt-bindings/clock/qcom,mmcc-msm8996.h> + + camss: camss@a34000 { + compatible = "qcom,msm8996-camss"; + + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CSI0PHY_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CSI1PHY_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CSI2PHY_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CSI3PHY_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_AHB_CLK>, + <&mmcc CAMSS_VFE_AXI_CLK>; + + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe0_ahb", + "vfe0_stream", + "vfe1", + "csi_vfe1", + "vfe1_ahb", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; + + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "vfe0", + "vfe1"; + + iommus = <&vfe_smmu 0>, + <&vfe_smmu 1>, + <&vfe_smmu 2>, + <&vfe_smmu 3>; + + power-domains = <&mmcc VFE0_GDSC>, + <&mmcc VFE1_GDSC>; + + reg = <0x00a34000 0x1000>, + <0x00a00030 0x4>, + <0x00a35000 0x1000>, + <0x00a00038 0x4>, + <0x00a36000 0x1000>, + <0x00a00040 0x4>, + <0x00a30000 0x100>, + <0x00a30400 0x100>, + <0x00a30800 0x100>, + <0x00a30c00 0x100>, + <0x00a31000 0x500>, + <0x00a00020 0x10>, + <0x00a10000 0x1000>, + <0x00a14000 0x1000>; + + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "ispif", + "csi_clk_mux", + "vfe0", + "vfe1"; + + vdda-supply = <®_2v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml index fa0dc6c47f1d..3a4d817e544e 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,msm8996-venus.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,msm8996-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm MSM8996 Venus video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -14,16 +13,13 @@ description: | The Venus IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,msm8996-venus - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - power-domains: maxItems: 1 @@ -37,12 +33,17 @@ properties: - const: bus - const: mbus + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: video-mem + - const: cpu-cfg + iommus: maxItems: 20 - memory-region: - maxItems: 1 - video-decoder: type: object @@ -93,80 +94,62 @@ properties: additionalProperties: false - video-firmware: - type: object - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - interrupts - - power-domains - - clocks - - clock-names - iommus - - memory-region - video-decoder - video-encoder +unevaluatedProperties: false + examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,mmcc-msm8996.h> - - video-codec@c00000 { - compatible = "qcom,msm8996-venus"; - reg = <0x00c00000 0xff000>; - interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mmcc VIDEO_CORE_CLK>, - <&mmcc VIDEO_AHB_CLK>, - <&mmcc VIDEO_AXI_CLK>, - <&mmcc VIDEO_MAXI_CLK>; - clock-names = "core", "iface", "bus", "mbus"; - power-domains = <&mmcc VENUS_GDSC>; - iommus = <&venus_smmu 0x00>, - <&venus_smmu 0x01>, - <&venus_smmu 0x0a>, - <&venus_smmu 0x07>, - <&venus_smmu 0x0e>, - <&venus_smmu 0x0f>, - <&venus_smmu 0x08>, - <&venus_smmu 0x09>, - <&venus_smmu 0x0b>, - <&venus_smmu 0x0c>, - <&venus_smmu 0x0d>, - <&venus_smmu 0x10>, - <&venus_smmu 0x11>, - <&venus_smmu 0x21>, - <&venus_smmu 0x28>, - <&venus_smmu 0x29>, - <&venus_smmu 0x2b>, - <&venus_smmu 0x2c>, - <&venus_smmu 0x2d>, - <&venus_smmu 0x31>; - memory-region = <&venus_mem>; - - video-decoder { - compatible = "venus-decoder"; - clocks = <&mmcc VIDEO_SUBCORE0_CLK>; - clock-names = "core"; - power-domains = <&mmcc VENUS_CORE0_GDSC>; - }; - - video-encoder { - compatible = "venus-encoder"; - clocks = <&mmcc VIDEO_SUBCORE1_CLK>; - clock-names = "core"; - power-domains = <&mmcc VENUS_CORE1_GDSC>; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,mmcc-msm8996.h> + + video-codec@c00000 { + compatible = "qcom,msm8996-venus"; + reg = <0x00c00000 0xff000>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc VIDEO_MAXI_CLK>; + clock-names = "core", "iface", "bus", "mbus"; + power-domains = <&mmcc VENUS_GDSC>; + iommus = <&venus_smmu 0x00>, + <&venus_smmu 0x01>, + <&venus_smmu 0x0a>, + <&venus_smmu 0x07>, + <&venus_smmu 0x0e>, + <&venus_smmu 0x0f>, + <&venus_smmu 0x08>, + <&venus_smmu 0x09>, + <&venus_smmu 0x0b>, + <&venus_smmu 0x0c>, + <&venus_smmu 0x0d>, + <&venus_smmu 0x10>, + <&venus_smmu 0x11>, + <&venus_smmu 0x21>, + <&venus_smmu 0x28>, + <&venus_smmu 0x29>, + <&venus_smmu 0x2b>, + <&venus_smmu 0x2c>, + <&venus_smmu 0x2d>, + <&venus_smmu 0x31>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE1_GDSC>; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml index 764affa4877e..5cec1d077cda 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,sc7180-venus.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,sc7180-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm SC7180 Venus video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -14,23 +13,23 @@ description: | The Venus IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,sc7180-venus - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - power-domains: - maxItems: 2 + minItems: 2 + maxItems: 3 power-domain-names: + minItems: 2 items: - const: venus - const: vcodec0 + - const: cx clocks: maxItems: 5 @@ -57,6 +56,10 @@ properties: - const: video-mem - const: cpu-cfg + operating-points-v2: true + opp-table: + type: object + video-decoder: type: object @@ -81,60 +84,42 @@ properties: additionalProperties: false - video-firmware: - type: object - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - interrupts - - power-domains - power-domain-names - - clocks - - clock-names - iommus - - memory-region - video-decoder - video-encoder +unevaluatedProperties: false + examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,videocc-sc7180.h> - - venus: video-codec@aa00000 { - compatible = "qcom,sc7180-venus"; - reg = <0 0x0aa00000 0 0xff000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&videocc VENUS_GDSC>, - <&videocc VCODEC0_GDSC>; - power-domain-names = "venus", "vcodec0"; - clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, - <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, - <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; - clock-names = "core", "iface", "bus", - "vcodec0_core", "vcodec0_bus"; - iommus = <&apps_smmu 0x0c00 0x60>; - memory-region = <&venus_mem>; - - video-decoder { - compatible = "venus-decoder"; - }; - - video-encoder { - compatible = "venus-encoder"; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sc7180.h> + + venus: video-codec@aa00000 { + compatible = "qcom,sc7180-venus"; + reg = <0x0aa00000 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>; + power-domain-names = "venus", "vcodec0"; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus"; + iommus = <&apps_smmu 0x0c00 0x60>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml new file mode 100644 index 000000000000..8f9b6433aeb8 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sc7280-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7280 Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus Iris2 IP is a video encode and decode accelerator present + on Qualcomm platforms + +allOf: + - $ref: qcom,venus-common.yaml# + +properties: + compatible: + const: qcom,sc7280-venus + + power-domains: + minItems: 2 + maxItems: 3 + + power-domain-names: + minItems: 2 + items: + - const: venus + - const: vcodec0 + - const: cx + + clocks: + maxItems: 5 + + clock-names: + items: + - const: core + - const: bus + - const: iface + - const: vcodec_core + - const: vcodec_bus + + iommus: + maxItems: 2 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: cpu-cfg + - const: video-mem + + operating-points-v2: true + opp-table: + type: object + + video-decoder: + type: object + + properties: + compatible: + const: venus-decoder + + required: + - compatible + + additionalProperties: false + + video-encoder: + type: object + + properties: + compatible: + const: venus-encoder + + required: + - compatible + + additionalProperties: false + +required: + - compatible + - power-domain-names + - iommus + - video-decoder + - video-encoder + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sc7280.h> + #include <dt-bindings/interconnect/qcom,sc7280.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + venus: video-codec@aa00000 { + compatible = "qcom,sc7280-venus"; + reg = <0x0aa00000 0xd0600>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>, + <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_MVS0_CORE_CLK>, + <&videocc VIDEO_CC_MVS0_AXI_CLK>; + clock-names = "core", "bus", "iface", + "vcodec_core", "vcodec_bus"; + + power-domains = <&videocc MVSC_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SC7280_CX>; + power-domain-names = "venus", "vcodec0", "cx"; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "cpu-cfg", "video-mem"; + + iommus = <&apps_smmu 0x2180 0x20>, + <&apps_smmu 0x2184 0x20>; + + memory-region = <&video_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + + video-firmware { + iommus = <&apps_smmu 0x21a2 0x0>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml new file mode 100644 index 000000000000..584106e275f6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml @@ -0,0 +1,385 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,sdm660-camss + + clocks: + minItems: 42 + maxItems: 42 + + clock-names: + items: + - const: ahb + - const: cphy_csid0 + - const: cphy_csid1 + - const: cphy_csid2 + - const: cphy_csid3 + - const: csi0_ahb + - const: csi0 + - const: csi0_phy + - const: csi0_pix + - const: csi0_rdi + - const: csi1_ahb + - const: csi1 + - const: csi1_phy + - const: csi1_pix + - const: csi1_rdi + - const: csi2_ahb + - const: csi2 + - const: csi2_phy + - const: csi2_pix + - const: csi2_rdi + - const: csi3_ahb + - const: csi3 + - const: csi3_phy + - const: csi3_pix + - const: csi3_rdi + - const: csiphy0_timer + - const: csiphy1_timer + - const: csiphy2_timer + - const: csiphy_ahb2crif + - const: csi_vfe0 + - const: csi_vfe1 + - const: ispif_ahb + - const: throttle_axi + - const: top_ahb + - const: vfe0_ahb + - const: vfe0 + - const: vfe0_stream + - const: vfe1_ahb + - const: vfe1 + - const: vfe1_stream + - const: vfe_ahb + - const: vfe_axi + + interrupts: + minItems: 10 + maxItems: 10 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid3 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: ispif + - const: vfe0 + - const: vfe1 + + interconnects: + maxItems: 1 + + interconnect-names: + items: + - const: vfe-mem + + iommus: + maxItems: 4 + + power-domains: + items: + - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller. + - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + reg: + minItems: 14 + maxItems: 14 + + reg-names: + items: + - const: csi_clk_mux + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid3 + - const: csiphy0 + - const: csiphy0_clk_mux + - const: csiphy1 + - const: csiphy1_clk_mux + - const: csiphy2 + - const: csiphy2_clk_mux + - const: ispif + - const: vfe0 + - const: vfe1 + + vdda-supply: + description: + Definition of the regulator used as analog power supply. + +required: + - clock-names + - clocks + - compatible + - interrupt-names + - interrupts + - iommus + - power-domains + - reg + - reg-names + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-sdm660.h> + #include <dt-bindings/clock/qcom,mmcc-sdm660.h> + + camss: camss@ca00020 { + compatible = "qcom,sdm660-camss"; + + clocks = <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CSIPHY_AHB2CRIF_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc THROTTLE_CAMSS_AXI_CLK>, + <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>; + + clock-names = "ahb", + "cphy_csid0", + "cphy_csid1", + "cphy_csid2", + "cphy_csid3", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csiphy_ahb2crif", + "csi_vfe0", + "csi_vfe1", + "ispif_ahb", + "throttle_axi", + "top_ahb", + "vfe0_ahb", + "vfe0", + "vfe0_stream", + "vfe1_ahb", + "vfe1", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; + + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "csid0", + "csid1", + "csid2", + "csid3", + "csiphy0", + "csiphy1", + "csiphy2", + "ispif", + "vfe0", + "vfe1"; + + iommus = <&mmss_smmu 0xc00>, + <&mmss_smmu 0xc01>, + <&mmss_smmu 0xc02>, + <&mmss_smmu 0xc03>; + + power-domains = <&mmcc CAMSS_VFE0_GDSC>, + <&mmcc CAMSS_VFE1_GDSC>; + + reg = <0x0ca00020 0x10>, + <0x0ca30000 0x100>, + <0x0ca30400 0x100>, + <0x0ca30800 0x100>, + <0x0ca30c00 0x100>, + <0x0c824000 0x1000>, + <0x0ca00120 0x4>, + <0x0c825000 0x1000>, + <0x0ca00124 0x4>, + <0x0c826000 0x1000>, + <0x0ca00128 0x4>, + <0x0ca31000 0x500>, + <0x0ca10000 0x1000>, + <0x0ca14000 0x1000>; + + reg-names = "csi_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "ispif", + "vfe0", + "vfe1"; + + vdda-supply = <®_2v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml new file mode 100644 index 000000000000..a51835b22045 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sdm660-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM660 Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +allOf: + - $ref: qcom,venus-common.yaml# + +properties: + compatible: + const: qcom,sdm660-venus + + clocks: + maxItems: 4 + + clock-names: + items: + - const: core + - const: iface + - const: bus + - const: bus_throttle + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: cpu-cfg + - const: video-mem + + iommus: + maxItems: 20 + + power-domains: + maxItems: 1 + + video-decoder: + type: object + + properties: + compatible: + const: venus-decoder + + clocks: + maxItems: 1 + + clock-names: + items: + - const: vcodec0_core + + power-domains: + maxItems: 1 + + required: + - compatible + - clocks + - clock-names + - power-domains + + additionalProperties: false + + video-encoder: + type: object + + properties: + compatible: + const: venus-encoder + + clocks: + maxItems: 1 + + clock-names: + items: + - const: vcodec0_core + + power-domains: + maxItems: 1 + + required: + - compatible + - clocks + - clock-names + - power-domains + + additionalProperties: false + +required: + - compatible + - iommus + - video-decoder + - video-encoder + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,mmcc-sdm660.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + video-codec@cc00000 { + compatible = "qcom,sdm660-venus"; + reg = <0x0cc00000 0xff000>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc THROTTLE_VIDEO_AXI_CLK>; + clock-names = "core", "iface", "bus", "bus_throttle"; + interconnects = <&gnoc 0 &mnoc 13>, + <&mnoc 4 &bimc 5>; + interconnect-names = "cpu-cfg", "video-mem"; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&mmss_smmu 0x400>, + <&mmss_smmu 0x401>, + <&mmss_smmu 0x40a>, + <&mmss_smmu 0x407>, + <&mmss_smmu 0x40e>, + <&mmss_smmu 0x40f>, + <&mmss_smmu 0x408>, + <&mmss_smmu 0x409>, + <&mmss_smmu 0x40b>, + <&mmss_smmu 0x40c>, + <&mmss_smmu 0x40d>, + <&mmss_smmu 0x410>, + <&mmss_smmu 0x421>, + <&mmss_smmu 0x428>, + <&mmss_smmu 0x429>, + <&mmss_smmu 0x42b>, + <&mmss_smmu 0x42c>, + <&mmss_smmu 0x42d>, + <&mmss_smmu 0x411>, + <&mmss_smmu 0x431>; + memory-region = <&venus_region>; + power-domains = <&mmcc VENUS_GDSC>; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml new file mode 100644 index 000000000000..ec4380a0a03f --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml @@ -0,0 +1,360 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,sdm845-camss + + clocks: + minItems: 36 + maxItems: 36 + + clock-names: + items: + - const: camnoc_axi + - const: cpas_ahb + - const: cphy_rx_src + - const: csi0 + - const: csi0_src + - const: csi1 + - const: csi1_src + - const: csi2 + - const: csi2_src + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy0_timer_src + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy1_timer_src + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy2_timer_src + - const: csiphy3 + - const: csiphy3_timer + - const: csiphy3_timer_src + - const: gcc_camera_ahb + - const: gcc_camera_axi + - const: slow_ahb_src + - const: soc_ahb + - const: vfe0_axi + - const: vfe0 + - const: vfe0_cphy_rx + - const: vfe0_src + - const: vfe1_axi + - const: vfe1 + - const: vfe1_cphy_rx + - const: vfe1_src + - const: vfe_lite + - const: vfe_lite_cphy_rx + - const: vfe_lite_src + + interrupts: + minItems: 10 + maxItems: 10 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: vfe0 + - const: vfe1 + - const: vfe_lite + + iommus: + maxItems: 4 + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + reg: + minItems: 10 + maxItems: 10 + + reg-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: vfe0 + - const: vfe1 + - const: vfe_lite + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + +required: + - clock-names + - clocks + - compatible + - interrupt-names + - interrupts + - iommus + - power-domains + - reg + - reg-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,camcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + camss: camss@acb3000 { + compatible = "qcom,sdm845-camss"; + + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY0_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY1_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY2_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY3_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK>, + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>; + + clock-names = "camnoc_axi", + "cpas_ahb", + "cphy_rx_src", + "csi0", + "csi0_src", + "csi1", + "csi1_src", + "csi2", + "csi2_src", + "csiphy0", + "csiphy0_timer", + "csiphy0_timer_src", + "csiphy1", + "csiphy1_timer", + "csiphy1_timer_src", + "csiphy2", + "csiphy2_timer", + "csiphy2_timer_src", + "csiphy3", + "csiphy3_timer", + "csiphy3_timer_src", + "gcc_camera_ahb", + "gcc_camera_axi", + "slow_ahb_src", + "soc_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_src", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_src", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_src"; + + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + iommus = <&apps_smmu 0x0808 0x0>, + <&apps_smmu 0x0810 0x8>, + <&apps_smmu 0x0c08 0x0>, + <&apps_smmu 0x0c10 0x8>; + + power-domains = <&clock_camcc IFE_0_GDSC>, + <&clock_camcc IFE_1_GDSC>, + <&clock_camcc TITAN_TOP_GDSC>; + + reg = <0 0xacb3000 0 0x1000>, + <0 0xacba000 0 0x1000>, + <0 0xacc8000 0 0x1000>, + <0 0xac65000 0 0x1000>, + <0 0xac66000 0 0x1000>, + <0 0xac67000 0 0x1000>, + <0 0xac68000 0 0x1000>, + <0 0xacaf000 0 0x4000>, + <0 0xacb6000 0 0x4000>, + <0 0xacc4000 0 0x4000>; + + reg-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml index 8552f4ab907e..6228fd2b3246 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus-v2.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,sdm845-venus-v2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm SDM845 Venus v2 video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -14,24 +13,24 @@ description: | The Venus IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,sdm845-venus-v2 - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - power-domains: - maxItems: 3 + minItems: 3 + maxItems: 4 power-domain-names: + minItems: 3 items: - const: venus - const: vcodec0 - const: vcodec1 + - const: cx clocks: maxItems: 7 @@ -49,8 +48,17 @@ properties: iommus: maxItems: 2 - memory-region: - maxItems: 1 + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: video-mem + - const: cpu-cfg + + operating-points-v2: true + opp-table: + type: object video-core0: type: object @@ -76,65 +84,47 @@ properties: additionalProperties: false - video-firmware: - type: object - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - interrupts - - power-domains - power-domain-names - - clocks - - clock-names - iommus - - memory-region - video-core0 - video-core1 +unevaluatedProperties: false + examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,videocc-sdm845.h> - - video-codec@aa00000 { - compatible = "qcom,sdm845-venus-v2"; - reg = <0 0x0aa00000 0 0xff000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, - <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, - <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC0_AXI_CLK>, - <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; - clock-names = "core", "iface", "bus", - "vcodec0_core", "vcodec0_bus", - "vcodec1_core", "vcodec1_bus"; - power-domains = <&videocc VENUS_GDSC>, - <&videocc VCODEC0_GDSC>, - <&videocc VCODEC1_GDSC>; - power-domain-names = "venus", "vcodec0", "vcodec1"; - iommus = <&apps_smmu 0x10a0 0x8>, - <&apps_smmu 0x10b0 0x0>; - memory-region = <&venus_mem>; - - video-core0 { - compatible = "venus-decoder"; - }; - - video-core1 { - compatible = "venus-encoder"; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sdm845.h> + + video-codec@aa00000 { + compatible = "qcom,sdm845-venus-v2"; + reg = <0x0aa00000 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus", + "vcodec1_core", "vcodec1_bus"; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>, + <&videocc VCODEC1_GDSC>; + power-domain-names = "venus", "vcodec0", "vcodec1"; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + + video-core0 { + compatible = "venus-decoder"; + }; + + video-core1 { + compatible = "venus-encoder"; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml index 05cabe4e893a..eabc0957b241 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml @@ -1,11 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - %YAML 1.2 --- -$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/media/qcom,sdm845-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Venus video encode and decode accelerators +title: Qualcomm SDM845 Venus video encode and decode accelerators maintainers: - Stanimir Varbanov <stanimir.varbanov@linaro.org> @@ -14,16 +13,13 @@ description: | The Venus IP is a video encode and decode accelerator present on Qualcomm platforms +allOf: + - $ref: qcom,venus-common.yaml# + properties: compatible: const: qcom,sdm845-venus - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - power-domains: maxItems: 1 @@ -39,9 +35,6 @@ properties: iommus: maxItems: 2 - memory-region: - maxItems: 1 - video-core0: type: object @@ -94,63 +87,45 @@ properties: additionalProperties: false - video-firmware: - type: object - - description: | - Firmware subnode is needed when the platform does not - have TrustZone. - - properties: - iommus: - maxItems: 1 - - required: - - iommus - required: - compatible - - reg - - interrupts - - power-domains - - clocks - - clock-names - iommus - - memory-region - video-core0 - video-core1 +unevaluatedProperties: false + examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,videocc-sdm845.h> - - video-codec@aa00000 { - compatible = "qcom,sdm845-venus"; - reg = <0 0x0aa00000 0 0xff000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, - <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>; - clock-names = "core", "iface", "bus"; - power-domains = <&videocc VENUS_GDSC>; - iommus = <&apps_smmu 0x10a0 0x8>, - <&apps_smmu 0x10b0 0x0>; - memory-region = <&venus_mem>; - - video-core0 { - compatible = "venus-decoder"; - clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; - clock-names = "core", "bus"; - power-domains = <&videocc VCODEC0_GDSC>; - }; - - video-core1 { - compatible = "venus-encoder"; - clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; - clock-names = "core", "bus"; - power-domains = <&videocc VCODEC1_GDSC>; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sdm845.h> + + video-codec@aa00000 { + compatible = "qcom,sdm845-venus"; + reg = <0x0aa00000 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>; + clock-names = "core", "iface", "bus"; + power-domains = <&videocc VENUS_GDSC>; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + + video-core0 { + compatible = "venus-decoder"; + clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC0_GDSC>; + }; + + video-core1 { + compatible = "venus-encoder"; + clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC1_GDSC>; }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml new file mode 100644 index 000000000000..fa5073c0fd1e --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml @@ -0,0 +1,463 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms. + +properties: + compatible: + const: qcom,sm8250-camss + + clocks: + minItems: 37 + maxItems: 37 + + clock-names: + items: + - const: cam_ahb_clk + - const: cam_hf_axi + - const: cam_sf_axi + - const: camnoc_axi + - const: camnoc_axi_src + - const: core_ahb + - const: cpas_ahb + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy3 + - const: csiphy3_timer + - const: csiphy4 + - const: csiphy4_timer + - const: csiphy5 + - const: csiphy5_timer + - const: slow_ahb_src + - const: vfe0_ahb + - const: vfe0_axi + - const: vfe0 + - const: vfe0_cphy_rx + - const: vfe0_csid + - const: vfe0_areg + - const: vfe1_ahb + - const: vfe1_axi + - const: vfe1 + - const: vfe1_cphy_rx + - const: vfe1_csid + - const: vfe1_areg + - const: vfe_lite_ahb + - const: vfe_lite_axi + - const: vfe_lite + - const: vfe_lite_cphy_rx + - const: vfe_lite_csid + + interrupts: + minItems: 14 + maxItems: 14 + + interrupt-names: + items: + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: csiphy4 + - const: csiphy5 + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid3 + - const: vfe0 + - const: vfe1 + - const: vfe_lite0 + - const: vfe_lite1 + + iommus: + minItems: 8 + maxItems: 8 + + interconnects: + minItems: 4 + maxItems: 4 + + interconnect-names: + items: + - const: cam_ahb + - const: cam_hf_0_mnoc + - const: cam_sf_0_mnoc + - const: cam_sf_icp_mnoc + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@4: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + port@5: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - clock-lanes + - data-lanes + + reg: + minItems: 10 + maxItems: 10 + + reg-names: + items: + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: csiphy4 + - const: csiphy5 + - const: vfe0 + - const: vfe1 + - const: vfe_lite0 + - const: vfe_lite1 + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + +required: + - clock-names + - clocks + - compatible + - interconnects + - interconnect-names + - interrupts + - interrupt-names + - iommus + - power-domains + - reg + - reg-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,camcc-sm8250.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + camss: camss@ac6a000 { + compatible = "qcom,sm8250-camss"; + + reg = <0 0xac6a000 0 0x2000>, + <0 0xac6c000 0 0x2000>, + <0 0xac6e000 0 0x1000>, + <0 0xac70000 0 0x1000>, + <0 0xac72000 0 0x1000>, + <0 0xac74000 0 0x1000>, + <0 0xacb4000 0 0xd000>, + <0 0xacc3000 0 0xd000>, + <0 0xacd9000 0 0x2200>, + <0 0xacdb200 0 0x2200>; + reg-names = "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + + interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "csid0", + "csid1", + "csid2", + "csid3", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + power-domains = <&camcc IFE_0_GDSC>, + <&camcc IFE_1_GDSC>, + <&camcc TITAN_TOP_GDSC>; + + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>, + <&camcc CAM_CC_CORE_AHB_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY5_CLK>, + <&camcc CAM_CC_CSI5PHYTIMER_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_IFE_0_AHB_CLK>, + <&camcc CAM_CC_IFE_0_AXI_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_0_CSID_CLK>, + <&camcc CAM_CC_IFE_0_AREG_CLK>, + <&camcc CAM_CC_IFE_1_AHB_CLK>, + <&camcc CAM_CC_IFE_1_AXI_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_1_CSID_CLK>, + <&camcc CAM_CC_IFE_1_AREG_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_AXI_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + clock-names = "cam_ahb_clk", + "cam_hf_axi", + "cam_sf_axi", + "camnoc_axi", + "camnoc_axi_src", + "core_ahb", + "cpas_ahb", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "csiphy5", + "csiphy5_timer", + "slow_ahb_src", + "vfe0_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_csid", + "vfe0_areg", + "vfe1_ahb", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_csid", + "vfe1_areg", + "vfe_lite_ahb", + "vfe_lite_axi", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + + iommus = <&apps_smmu 0x800 0x400>, + <&apps_smmu 0x801 0x400>, + <&apps_smmu 0x840 0x400>, + <&apps_smmu 0x841 0x400>, + <&apps_smmu 0xC00 0x400>, + <&apps_smmu 0xC01 0x400>, + <&apps_smmu 0xC40 0x400>, + <&apps_smmu 0xC41 0x400>; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>, + <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "cam_ahb", + "cam_hf_0_mnoc", + "cam_sf_0_mnoc", + "cam_sf_icp_mnoc"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml new file mode 100644 index 000000000000..f66033ae8b59 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sm8250-venus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8250 Venus video encode and decode accelerators + +maintainers: + - Stanimir Varbanov <stanimir.varbanov@linaro.org> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +allOf: + - $ref: qcom,venus-common.yaml# + +properties: + compatible: + const: qcom,sm8250-venus + + power-domains: + minItems: 2 + maxItems: 3 + + power-domain-names: + minItems: 2 + items: + - const: venus + - const: vcodec0 + - const: mx + + clocks: + maxItems: 3 + + clock-names: + items: + - const: iface + - const: core + - const: vcodec0_core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: cpu-cfg + - const: video-mem + + operating-points-v2: true + opp-table: + type: object + + resets: + maxItems: 2 + + reset-names: + items: + - const: bus + - const: core + + video-decoder: + type: object + + properties: + compatible: + const: venus-decoder + + required: + - compatible + + additionalProperties: false + + video-encoder: + type: object + + properties: + compatible: + const: venus-encoder + + required: + - compatible + + additionalProperties: false + +required: + - compatible + - power-domain-names + - interconnects + - interconnect-names + - iommus + - resets + - reset-names + - video-decoder + - video-encoder + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,videocc-sm8250.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + venus: video-codec@aa00000 { + compatible = "qcom,sm8250-venus"; + reg = <0x0aa00000 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc MVS0C_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd RPMHPD_MX>; + power-domain-names = "venus", "vcodec0", "mx"; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", "core", "vcodec0_core"; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>, + <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "cpu-cfg", "video-mem"; + + iommus = <&apps_smmu 0x2100 0x0400>; + memory-region = <&video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>, + <&videocc VIDEO_CC_MVS0C_CLK_ARES>; + reset-names = "bus", "core"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,venus-common.yaml b/Documentation/devicetree/bindings/media/qcom,venus-common.yaml new file mode 100644 index 000000000000..3153d91f9d18 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,venus-common.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,venus-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC Venus Video Encode and Decode Accelerators Common Properties + +maintainers: + - Stanimir Varbanov <stanimir.k.varbanov@gmail.com> + - Vikash Garodia <quic_vgarodia@quicinc.com> + +description: | + The Venus IP is a video encode and decode accelerator present + on Qualcomm platforms + +properties: + reg: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 7 + + clock-names: + minItems: 3 + maxItems: 7 + + firmware-name: + maxItems: 1 + + interrupts: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 20 + + memory-region: + maxItems: 1 + + power-domains: + minItems: 1 + maxItems: 4 + + power-domain-names: + minItems: 1 + maxItems: 4 + + video-firmware: + type: object + additionalProperties: false + + description: | + Firmware subnode is needed when the platform does not + have TrustZone. + + properties: + iommus: + maxItems: 1 + + required: + - iommus + +required: + - reg + - clocks + - clock-names + - interrupts + - memory-region + - power-domains + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index b27c9385d490..7bbe580c80f7 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/media/rc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Generic Infrared Remote Controller Device Tree Bindings +title: Generic Infrared Remote Controller maintainers: - Mauro Carvalho Chehab <mchehab@kernel.org> @@ -12,142 +12,152 @@ maintainers: properties: $nodename: - pattern: "^ir(@[a-f0-9]+)?$" + pattern: "^ir(-receiver)?(@[a-f0-9]+)?$" linux,rc-map-name: description: Specifies the scancode/key mapping table defined in-kernel for the remote controller. - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - enum: - - rc-adstech-dvb-t-pci - - rc-alink-dtu-m - - rc-anysee - - rc-apac-viewcomp - - rc-astrometa-t2hybrid - - rc-asus-pc39 - - rc-asus-ps3-100 - - rc-ati-tv-wonder-hd-600 - - rc-ati-x10 - - rc-avermedia - - rc-avermedia-a16d - - rc-avermedia-cardbus - - rc-avermedia-dvbt - - rc-avermedia-m135a - - rc-avermedia-m733a-rm-k6 - - rc-avermedia-rm-ks - - rc-avertv-303 - - rc-azurewave-ad-tu700 - - rc-beelink-gs1 - - rc-behold - - rc-behold-columbus - - rc-budget-ci-old - - rc-cec - - rc-cinergy - - rc-cinergy-1400 - - rc-d680-dmb - - rc-delock-61959 - - rc-dib0700-nec - - rc-dib0700-rc5 - - rc-digitalnow-tinytwin - - rc-digittrade - - rc-dm1105-nec - - rc-dntv-live-dvb-t - - rc-dntv-live-dvbt-pro - - rc-dtt200u - - rc-dvbsky - - rc-dvico-mce - - rc-dvico-portable - - rc-em-terratec - - rc-empty - - rc-encore-enltv - - rc-encore-enltv-fm53 - - rc-encore-enltv2 - - rc-evga-indtube - - rc-eztv - - rc-flydvb - - rc-flyvideo - - rc-fusionhdtv-mce - - rc-gadmei-rm008z - - rc-geekbox - - rc-genius-tvgo-a11mce - - rc-gotview7135 - - rc-hauppauge - - rc-hisi-poplar - - rc-hisi-tv-demo - - rc-imon-mce - - rc-imon-pad - - rc-imon-rsc - - rc-iodata-bctv7e - - rc-it913x-v1 - - rc-it913x-v2 - - rc-kaiomy - - rc-khadas - - rc-kworld-315u - - rc-kworld-pc150u - - rc-kworld-plus-tv-analog - - rc-leadtek-y04g0051 - - rc-lme2510 - - rc-manli - - rc-medion-x10 - - rc-medion-x10-digitainer - - rc-medion-x10-or2x - - rc-msi-digivox-ii - - rc-msi-digivox-iii - - rc-msi-tvanywhere - - rc-msi-tvanywhere-plus - - rc-nebula - - rc-nec-terratec-cinergy-xs - - rc-norwood - - rc-npgtech - - rc-odroid - - rc-pctv-sedna - - rc-pinnacle-color - - rc-pinnacle-grey - - rc-pinnacle-pctv-hd - - rc-pixelview - - rc-pixelview-002t - - rc-pixelview-mk12 - - rc-pixelview-new - - rc-powercolor-real-angel - - rc-proteus-2309 - - rc-purpletv - - rc-pv951 - - rc-rc5-tv - - rc-rc6-mce - - rc-real-audio-220-32-keys - - rc-reddo - - rc-snapstream-firefly - - rc-streamzap - - rc-su3000 - - rc-tango - - rc-tanix-tx3mini - - rc-tanix-tx5max - - rc-tbs-nec - - rc-technisat-ts35 - - rc-technisat-usb2 - - rc-terratec-cinergy-c-pci - - rc-terratec-cinergy-s2-hd - - rc-terratec-cinergy-xs - - rc-terratec-slim - - rc-terratec-slim-2 - - rc-tevii-nec - - rc-tivo - - rc-total-media-in-hand - - rc-total-media-in-hand-02 - - rc-trekstor - - rc-tt-1500 - - rc-twinhan-dtv-cab-ci - - rc-twinhan1027 - - rc-videomate-k100 - - rc-videomate-s350 - - rc-videomate-tv-pvr - - rc-videostrong-kii-pro - - rc-wetek-hub - - rc-wetek-play2 - - rc-winfast - - rc-winfast-usbii-deluxe - - rc-x96max - - rc-xbox-dvd - - rc-zx-irdec + $ref: /schemas/types.yaml#/definitions/string + enum: + - rc-adstech-dvb-t-pci + - rc-alink-dtu-m + - rc-anysee + - rc-apac-viewcomp + - rc-astrometa-t2hybrid + - rc-asus-pc39 + - rc-asus-ps3-100 + - rc-ati-tv-wonder-hd-600 + - rc-ati-x10 + - rc-avermedia + - rc-avermedia-a16d + - rc-avermedia-cardbus + - rc-avermedia-dvbt + - rc-avermedia-m135a + - rc-avermedia-m733a-rm-k6 + - rc-avermedia-rm-ks + - rc-avertv-303 + - rc-azurewave-ad-tu700 + - rc-beelink-gs1 + - rc-beelink-mxiii + - rc-behold + - rc-behold-columbus + - rc-budget-ci-old + - rc-cec + - rc-cinergy + - rc-cinergy-1400 + - rc-ct-90405 + - rc-d680-dmb + - rc-delock-61959 + - rc-dib0700-nec + - rc-dib0700-rc5 + - rc-digitalnow-tinytwin + - rc-digittrade + - rc-dm1105-nec + - rc-dntv-live-dvb-t + - rc-dntv-live-dvbt-pro + - rc-dreambox + - rc-dtt200u + - rc-dvbsky + - rc-dvico-mce + - rc-dvico-portable + - rc-em-terratec + - rc-empty + - rc-encore-enltv + - rc-encore-enltv-fm53 + - rc-encore-enltv2 + - rc-evga-indtube + - rc-eztv + - rc-flydvb + - rc-flyvideo + - rc-fusionhdtv-mce + - rc-gadmei-rm008z + - rc-geekbox + - rc-genius-tvgo-a11mce + - rc-gotview7135 + - rc-hauppauge + - rc-hisi-poplar + - rc-hisi-tv-demo + - rc-imon-mce + - rc-imon-pad + - rc-imon-rsc + - rc-iodata-bctv7e + - rc-it913x-v1 + - rc-it913x-v2 + - rc-kaiomy + - rc-khadas + - rc-khamsin + - rc-kworld-315u + - rc-kworld-pc150u + - rc-kworld-plus-tv-analog + - rc-leadtek-y04g0051 + - rc-lme2510 + - rc-manli + - rc-mecool-kii-pro + - rc-mecool-kiii-pro + - rc-medion-x10 + - rc-medion-x10-digitainer + - rc-medion-x10-or2x + - rc-minix-neo + - rc-msi-digivox-ii + - rc-msi-digivox-iii + - rc-msi-tvanywhere + - rc-msi-tvanywhere-plus + - rc-nebula + - rc-nec-terratec-cinergy-xs + - rc-norwood + - rc-npgtech + - rc-odroid + - rc-pctv-sedna + - rc-pine64 + - rc-pinnacle-color + - rc-pinnacle-grey + - rc-pinnacle-pctv-hd + - rc-pixelview + - rc-pixelview-002t + - rc-pixelview-mk12 + - rc-pixelview-new + - rc-powercolor-real-angel + - rc-proteus-2309 + - rc-purpletv + - rc-pv951 + - rc-rc5-tv + - rc-rc6-mce + - rc-real-audio-220-32-keys + - rc-reddo + - rc-snapstream-firefly + - rc-streamzap + - rc-su3000 + - rc-tanix-tx3mini + - rc-tanix-tx5max + - rc-tbs-nec + - rc-technisat-ts35 + - rc-technisat-usb2 + - rc-terratec-cinergy-c-pci + - rc-terratec-cinergy-s2-hd + - rc-terratec-cinergy-xs + - rc-terratec-slim + - rc-terratec-slim-2 + - rc-tevii-nec + - rc-tivo + - rc-total-media-in-hand + - rc-total-media-in-hand-02 + - rc-trekstor + - rc-tt-1500 + - rc-twinhan-dtv-cab-ci + - rc-twinhan1027 + - rc-videomate-k100 + - rc-videomate-s350 + - rc-videomate-tv-pvr + - rc-videostrong-kii-pro + - rc-vega-s9x + - rc-wetek-hub + - rc-wetek-play2 + - rc-winfast + - rc-winfast-usbii-deluxe + - rc-x96max + - rc-xbox-360 + - rc-xbox-dvd + - rc-zx-irdec + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml index fcb5f13704a5..d527fc42c3fd 100644 --- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml +++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/media/renesas,ceu.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Renesas Capture Engine Unit (CEU) Bindings +title: Renesas Capture Engine Unit (CEU) maintainers: - Jacopo Mondi <jacopo+renesas@jmondi.org> @@ -27,36 +27,35 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + port: - type: object - additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false properties: - endpoint: - type: object - additionalProperties: false - - # Properties described in - # Documentation/devicetree/bindings/media/video-interfaces.txt - properties: - remote-endpoint: true - hsync-active: true - vsync-active: true - field-even-active: false - bus-width: - enum: [8, 16] - default: 8 - - required: - - remote-endpoint - - required: - - endpoint + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + hsync-active: true + vsync-active: true + field-even-active: false + bus-width: + enum: [8, 16] + default: 8 required: - compatible - reg - interrupts + - clocks + - power-domains - port additionalProperties: false @@ -64,11 +63,14 @@ additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/r7s72100-clock.h> ceu: ceu@e8210000 { reg = <0xe8210000 0x209c>; compatible = "renesas,r7s72100-ceu"; interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp6_clks R7S72100_CLK_CEU>; + power-domains = <&cpg_clocks>; port { ceu_in: endpoint { diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml index 408442a0c389..977ab188d654 100644 --- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml @@ -19,15 +19,19 @@ properties: compatible: items: - enum: - - renesas,r8a774a1-csi2 # RZ/G2M - - renesas,r8a774b1-csi2 # RZ/G2N - - renesas,r8a774c0-csi2 # RZ/G2E - - renesas,r8a7795-csi2 # R-Car H3 - - renesas,r8a7796-csi2 # R-Car M3-W - - renesas,r8a77965-csi2 # R-Car M3-N - - renesas,r8a77970-csi2 # R-Car V3M - - renesas,r8a77980-csi2 # R-Car V3H - - renesas,r8a77990-csi2 # R-Car E3 + - renesas,r8a774a1-csi2 # RZ/G2M + - renesas,r8a774b1-csi2 # RZ/G2N + - renesas,r8a774c0-csi2 # RZ/G2E + - renesas,r8a774e1-csi2 # RZ/G2H + - renesas,r8a7795-csi2 # R-Car H3 + - renesas,r8a7796-csi2 # R-Car M3-W + - renesas,r8a77961-csi2 # R-Car M3-W+ + - renesas,r8a77965-csi2 # R-Car M3-N + - renesas,r8a77970-csi2 # R-Car V3M + - renesas,r8a77980-csi2 # R-Car V3H + - renesas,r8a77990-csi2 # R-Car E3 + - renesas,r8a779a0-csi2 # R-Car V3U + - renesas,r8a779g0-csi2 # R-Car V4H reg: maxItems: 1 @@ -45,76 +49,43 @@ properties: maxItems: 1 ports: - type: object - description: - A node containing input and output port nodes with endpoint definitions - as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Input port node, single endpoint describing the CSI-2 transmitter. properties: - reg: - const: 0 - endpoint: - type: object + $ref: video-interfaces.yaml# + unevaluatedProperties: false properties: clock-lanes: maxItems: 1 data-lanes: - maxItems: 1 - - remote-endpoint: true + minItems: 1 + maxItems: 4 + items: + maximum: 4 required: - clock-lanes - data-lanes - - remote-endpoint - - additionalProperties: false - - additionalProperties: false port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Output port node, multiple endpoints describing all the R-Car VIN modules connected the CSI-2 receiver. - properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - - reg: - const: 1 - - patternProperties: - "^endpoint@[0-9a-f]$": - type: object - - properties: - reg: - maxItems: 1 - - remote-endpoint: true - - required: - - reg - - remote-endpoint - - additionalProperties: false - - additionalProperties: false + required: + - port@0 + - port@1 required: - compatible @@ -135,7 +106,7 @@ examples: csi20: csi2@fea80000 { compatible = "renesas,r8a7796-csi2"; - reg = <0 0xfea80000 0 0x10000>; + reg = <0xfea80000 0x10000>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 714>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt deleted file mode 100644 index 0d8974aa8b38..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,drif.txt +++ /dev/null @@ -1,177 +0,0 @@ -Renesas R-Car Gen3 Digital Radio Interface controller (DRIF) ------------------------------------------------------------- - -R-Car Gen3 DRIF is a SPI like receive only slave device. A general -representation of DRIF interfacing with a master device is shown below. - -+---------------------+ +---------------------+ -| |-----SCK------->|CLK | -| Master |-----SS-------->|SYNC DRIFn (slave) | -| |-----SD0------->|D0 | -| |-----SD1------->|D1 | -+---------------------+ +---------------------+ - -As per datasheet, each DRIF channel (drifn) is made up of two internal -channels (drifn0 & drifn1). These two internal channels share the common -CLK & SYNC. Each internal channel has its own dedicated resources like -irq, dma channels, address space & clock. This internal split is not -visible to the external master device. - -The device tree model represents each internal channel as a separate node. -The internal channels sharing the CLK & SYNC are tied together by their -phandles using a property called "renesas,bonding". For the rest of -the documentation, unless explicitly stated, the word channel implies an -internal channel. - -When both internal channels are enabled they need to be managed together -as one (i.e.) they cannot operate alone as independent devices. Out of the -two, one of them needs to act as a primary device that accepts common -properties of both the internal channels. This channel is identified by a -property called "renesas,primary-bond". - -To summarize, - - When both the internal channels that are bonded together are enabled, - the zeroth channel is selected as primary-bond. This channels accepts - properties common to all the members of the bond. - - When only one of the bonded channels need to be enabled, the property - "renesas,bonding" or "renesas,primary-bond" will have no effect. That - enabled channel can act alone as any other independent device. - -Required properties of an internal channel: -------------------------------------------- -- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC. - "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC. - "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: offset and length of that channel. -- interrupts: associated with that channel. -- clocks: phandle and clock specifier of that channel. -- clock-names: clock input name string: "fck". -- dmas: phandles to the DMA channels. -- dma-names: names of the DMA channel: "rx". -- renesas,bonding: phandle to the other channel. - -Optional properties of an internal channel: -------------------------------------------- -- power-domains: phandle to the respective power domain. - -Required properties of an internal channel when: - - It is the only enabled channel of the bond (or) - - If it acts as primary among enabled bonds --------------------------------------------------------- -- pinctrl-0: pin control group to be used for this channel. -- pinctrl-names: must be "default". -- renesas,primary-bond: empty property indicating the channel acts as primary - among the bonded channels. -- port: child port node corresponding to the data input, in accordance with - the video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The port - node must contain at least one endpoint. - -Optional endpoint property: ---------------------------- -- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively. - This property maps to SYNCAC bit in the hardware manual. The - default is 1 (active high). - -Example: --------- - -(1) Both internal channels enabled: ------------------------------------ - -When interfacing with a third party tuner device with two data pins as shown -below. - -+---------------------+ +---------------------+ -| |-----SCK------->|CLK | -| Master |-----SS-------->|SYNC DRIFn (slave) | -| |-----SD0------->|D0 | -| |-----SD1------->|D1 | -+---------------------+ +---------------------+ - - drif00: rif@e6f40000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f40000 0 0x64>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 515>; - clock-names = "fck"; - dmas = <&dmac1 0x20>, <&dmac2 0x20>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif01>; - renesas,primary-bond; - pinctrl-0 = <&drif0_pins>; - pinctrl-names = "default"; - port { - drif0_ep: endpoint { - remote-endpoint = <&tuner_ep>; - }; - }; - }; - - drif01: rif@e6f50000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f50000 0 0x64>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 514>; - clock-names = "fck"; - dmas = <&dmac1 0x22>, <&dmac2 0x22>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif00>; - }; - - -(2) Internal channel 1 alone is enabled: ----------------------------------------- - -When interfacing with a third party tuner device with one data pin as shown -below. - -+---------------------+ +---------------------+ -| |-----SCK------->|CLK | -| Master |-----SS-------->|SYNC DRIFn (slave) | -| | |D0 (unused) | -| |-----SD-------->|D1 | -+---------------------+ +---------------------+ - - drif00: rif@e6f40000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f40000 0 0x64>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 515>; - clock-names = "fck"; - dmas = <&dmac1 0x20>, <&dmac2 0x20>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif01>; - }; - - drif01: rif@e6f50000 { - compatible = "renesas,r8a7795-drif", - "renesas,rcar-gen3-drif"; - reg = <0 0xe6f50000 0 0x64>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 514>; - clock-names = "fck"; - dmas = <&dmac1 0x22>, <&dmac2 0x22>; - dma-names = "rx", "rx"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - renesas,bonding = <&drif00>; - pinctrl-0 = <&drif0_pins>; - pinctrl-names = "default"; - port { - drif0_ep: endpoint { - remote-endpoint = <&tuner_ep>; - sync-active = <0>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml new file mode 100644 index 000000000000..9403b235e976 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml @@ -0,0 +1,269 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,drif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF) + +maintainers: + - Ramesh Shanmugasundaram <rashanmu@gmail.com> + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + +description: | + R-Car Gen3 DRIF is a SPI like receive only slave device. A general + representation of DRIF interfacing with a master device is shown below. + + +---------------------+ +---------------------+ + | |-----SCK------->|CLK | + | Master |-----SS-------->|SYNC DRIFn (slave) | + | |-----SD0------->|D0 | + | |-----SD1------->|D1 | + +---------------------+ +---------------------+ + + As per datasheet, each DRIF channel (drifn) is made up of two internal + channels (drifn0 & drifn1). These two internal channels share the common + CLK & SYNC. Each internal channel has its own dedicated resources like + irq, dma channels, address space & clock. This internal split is not + visible to the external master device. + + The device tree model represents each internal channel as a separate node. + The internal channels sharing the CLK & SYNC are tied together by their + phandles using a property called "renesas,bonding". For the rest of + the documentation, unless explicitly stated, the word channel implies an + internal channel. + + When both internal channels are enabled they need to be managed together + as one (i.e.) they cannot operate alone as independent devices. Out of the + two, one of them needs to act as a primary device that accepts common + properties of both the internal channels. This channel is identified by a + property called "renesas,primary-bond". + + To summarize, + * When both the internal channels that are bonded together are enabled, + the zeroth channel is selected as primary-bond. This channels accepts + properties common to all the members of the bond. + * When only one of the bonded channels need to be enabled, the property + "renesas,bonding" or "renesas,primary-bond" will have no effect. That + enabled channel can act alone as any other independent device. + +properties: + compatible: + items: + - enum: + - renesas,r8a7795-drif # R-Car H3 + - renesas,r8a7796-drif # R-Car M3-W + - renesas,r8a77965-drif # R-Car M3-N + - renesas,r8a77990-drif # R-Car E3 + - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: fck + + resets: + maxItems: 1 + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + minItems: 1 + items: + - const: rx + - const: rx + + renesas,bonding: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle to the other internal channel of DRIF + + power-domains: + maxItems: 1 + + renesas,primary-bond: + type: boolean + description: + Indicates that the channel acts as primary among the bonded channels. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Child port node corresponding to the data input. The port node must + contain at least one endpoint. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + sync-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + Indicates sync signal polarity, 0/1 for low/high respectively. + This property maps to SYNCAC bit in the hardware manual. The + default is 1 (active high). + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - dmas + - dma-names + - renesas,bonding + - power-domains + +allOf: + - if: + required: + - renesas,primary-bond + then: + required: + - pinctrl-0 + - pinctrl-names + - port + + - if: + required: + - port + then: + required: + - pinctrl-0 + - pinctrl-names + else: + properties: + pinctrl-0: false + pinctrl-names: false + +additionalProperties: false + +examples: + # Example with both internal channels enabled. + # + # When interfacing with a third party tuner device with two data pins as shown + # below. + # + # +---------------------+ +---------------------+ + # | |-----SCK------->|CLK | + # | Master |-----SS-------->|SYNC DRIFn (slave) | + # | |-----SD0------->|D0 | + # | |-----SD1------->|D1 | + # +---------------------+ +---------------------+ + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + drif00: rif@e6f40000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f40000 0 0x64>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>; + clock-names = "fck"; + dmas = <&dmac1 0x20>, <&dmac2 0x20>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + renesas,bonding = <&drif01>; + resets = <&cpg 515>; + renesas,primary-bond; + pinctrl-0 = <&drif0_pins>; + pinctrl-names = "default"; + port { + drif0_ep: endpoint { + remote-endpoint = <&tuner_ep>; + }; + }; + }; + + drif01: rif@e6f50000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f50000 0 0x64>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>; + clock-names = "fck"; + dmas = <&dmac1 0x22>, <&dmac2 0x22>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + renesas,bonding = <&drif00>; + resets = <&cpg 514>; + }; + }; + + # Example with internal channel 1 alone enabled. + # + # When interfacing with a third party tuner device with one data pin as shown + # below. + # + # +---------------------+ +---------------------+ + # | |-----SCK------->|CLK | + # | Master |-----SS-------->|SYNC DRIFn (slave) | + # | | |D0 (unused) | + # | |-----SD-------->|D1 | + # +---------------------+ +---------------------+ + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + drif10: rif@e6f60000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f60000 0 0x64>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 513>; + clock-names = "fck"; + dmas = <&dmac1 0x24>, <&dmac2 0x24>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 513>; + renesas,bonding = <&drif11>; + }; + + drif11: rif@e6f70000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f70000 0 0x64>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 512>; + clock-names = "fck"; + dmas = <&dmac1 0x26>, <&dmac2 0x26>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 512>; + renesas,bonding = <&drif10>; + pinctrl-0 = <&drif1_pins>; + pinctrl-names = "default"; + port { + drif1_ep: endpoint { + remote-endpoint = <&tuner_ep1>; + sync-active = <0>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.txt b/Documentation/devicetree/bindings/media/renesas,fcp.txt deleted file mode 100644 index 79c37395b396..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,fcp.txt +++ /dev/null @@ -1,34 +0,0 @@ -Renesas R-Car Frame Compression Processor (FCP) ------------------------------------------------ - -The FCP is a companion module of video processing modules in the Renesas R-Car -Gen3 and RZ/G2 SoCs. It provides data compression and decompression, data -caching, and conversion of AXI transactions in order to reduce the memory -bandwidth. - -There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and FCP -for FDP (FCPF). Their configuration and behaviour depend on the module they -are paired with. These DT bindings currently support the FCPV and FCPF. - - - compatible: Must be one or more of the following - - - "renesas,fcpv" for generic compatible 'FCP for VSP' - - "renesas,fcpf" for generic compatible 'FCP for FDP' - - - reg: the register base and size for the device registers - - clocks: Reference to the functional clock - -Optional properties: - - power-domains : power-domain property defined with a power domain specifier - to respective power domain. - - -Device node example -------------------- - - fcpvd1: fcp@fea2f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfea2f000 0 0x200>; - clocks = <&cpg CPG_MOD 602>; - power-domains = <&sysc R8A7795_PD_A3VP>; - }; diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.yaml b/Documentation/devicetree/bindings/media/renesas,fcp.yaml new file mode 100644 index 000000000000..c6abe719881b --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,fcp.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,fcp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Frame Compression Processor (FCP) + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: | + The FCP is a companion module of video processing modules in the Renesas + R-Car Gen3 and RZ/G2 SoCs. It provides data compression and decompression, + data caching, and conversion of AXI transactions in order to reduce the + memory bandwidth. + + There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and + FCP for FDP (FCPF). Their configuration and behaviour depend on the module + they are paired with. These DT bindings currently support the FCPV and FCPF. + +properties: + compatible: + oneOf: + - enum: + - renesas,fcpv # FCP for VSP + - renesas,fcpf # FCP for FDP + - items: + - enum: + - renesas,r9a07g044-fcpvd # RZ/G2{L,LC} + - renesas,r9a07g054-fcpvd # RZ/V2L + - const: renesas,fcpv # Generic FCP for VSP fallback + + reg: + maxItems: 1 + + clocks: true + + clock-names: true + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - power-domains + - resets + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a07g044-fcpvd + - renesas,r9a07g054-fcpvd + then: + properties: + clocks: + items: + - description: Main clock + - description: Register access clock + - description: Video clock + clock-names: + items: + - const: aclk + - const: pclk + - const: vclk + required: + - clock-names + else: + properties: + clocks: + maxItems: 1 + clock-names: false + +examples: + # R8A7795 (R-Car H3) FCP for VSP-D1 + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0xfea2f000 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; +... diff --git a/Documentation/devicetree/bindings/media/renesas,fdp1.txt b/Documentation/devicetree/bindings/media/renesas,fdp1.txt deleted file mode 100644 index 8dd1007bb573..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,fdp1.txt +++ /dev/null @@ -1,37 +0,0 @@ -Renesas R-Car Fine Display Processor (FDP1) -------------------------------------------- - -The FDP1 is a de-interlacing module which converts interlaced video to -progressive video. It is capable of performing pixel format conversion between -YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are supported as -an input to the module. - -Required properties: - - - compatible: must be "renesas,fdp1" - - reg: the register base and size for the device registers - - interrupts : interrupt specifier for the FDP1 instance - - clocks: reference to the functional clock - -Optional properties: - - - power-domains: reference to the power domain that the FDP1 belongs to, if - any. - - renesas,fcp: a phandle referencing the FCP that handles memory accesses - for the FDP1. Not needed on Gen2, mandatory on Gen3. - -Please refer to the binding documentation for the clock and/or power domain -providers for more details. - - -Device node example -------------------- - - fdp1@fe940000 { - compatible = "renesas,fdp1"; - reg = <0 0xfe940000 0 0x2400>; - interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 119>; - power-domains = <&sysc R8A7795_PD_A3VP>; - renesas,fcp = <&fcpf0>; - }; diff --git a/Documentation/devicetree/bindings/media/renesas,fdp1.yaml b/Documentation/devicetree/bindings/media/renesas,fdp1.yaml new file mode 100644 index 000000000000..2a27a7296fea --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,fdp1.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,fdp1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Fine Display Processor (FDP1) + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: + The FDP1 is a de-interlacing module which converts interlaced video to + progressive video. It is capable of performing pixel format conversion + between YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are + supported as an input to the module. + +properties: + compatible: + enum: + - renesas,fdp1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,fcp: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A phandle referencing the FCP that handles memory accesses for the FDP1. + Not allowed on R-Car Gen2, mandatory on R-Car Gen3. + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0xfe940000 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; +... diff --git a/Documentation/devicetree/bindings/media/renesas,imr.txt b/Documentation/devicetree/bindings/media/renesas,imr.txt deleted file mode 100644 index b0614153ed36..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,imr.txt +++ /dev/null @@ -1,31 +0,0 @@ -Renesas R-Car Image Renderer (Distortion Correction Engine) ------------------------------------------------------------ - -The image renderer, or the distortion correction engine, is a drawing processor -with a simple instruction system capable of referencing video capture data or -data in an external memory as 2D texture data and performing texture mapping -and drawing with respect to any shape that is split into triangular objects. - -Required properties: - -- compatible: "renesas,<soctype>-imr-lx4", "renesas,imr-lx4" as a fallback for - the image renderer light extended 4 (IMR-LX4) found in the R-Car gen3 SoCs, - where the examples with <soctype> are: - - "renesas,r8a7795-imr-lx4" for R-Car H3, - - "renesas,r8a7796-imr-lx4" for R-Car M3-W. -- reg: offset and length of the register block; -- interrupts: single interrupt specifier; -- clocks: single clock phandle/specifier pair; -- power-domains: power domain phandle/specifier pair; -- resets: reset phandle/specifier pair. - -Example: - - imr-lx4@fe860000 { - compatible = "renesas,r8a7795-imr-lx4", "renesas,imr-lx4"; - reg = <0 0xfe860000 0 0x2000>; - interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 823>; - power-domains = <&sysc R8A7795_PD_A3VC>; - resets = <&cpg 823>; - }; diff --git a/Documentation/devicetree/bindings/media/renesas,imr.yaml b/Documentation/devicetree/bindings/media/renesas,imr.yaml new file mode 100644 index 000000000000..512f57417fd8 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,imr.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,imr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Image Renderer (Distortion Correction Engine) + +maintainers: + - Sergei Shtylyov <sergei.shtylyov@gmail.com> + +description: | + The image renderer, or the distortion correction engine, is a drawing + processor with a simple instruction system capable of referencing video + capture data or data in an external memory as 2D texture data and performing + texture mapping and drawing with respect to any shape that is split into + triangular objects. + + The image renderer light extended 4 (IMR-LX4) is found in R-Car Gen3 SoCs. + +properties: + compatible: + items: + - enum: + - renesas,r8a7795-imr-lx4 # R-Car H3 + - renesas,r8a7796-imr-lx4 # R-Car M3-W + - const: renesas,imr-lx4 # R-Car Gen3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + imr-lx4@fe860000 { + compatible = "renesas,r8a7795-imr-lx4", "renesas,imr-lx4"; + reg = <0xfe860000 0x2000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 823>; + power-domains = <&sysc R8A7795_PD_A3VC>; + resets = <&cpg 823>; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,isp.yaml b/Documentation/devicetree/bindings/media/renesas,isp.yaml new file mode 100644 index 000000000000..33650a1ea034 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,isp.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright (C) 2021 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,isp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car ISP Channel Selector + +maintainers: + - Niklas Söderlund <niklas.soderlund@ragnatech.se> + +description: + The R-Car ISP Channel Selector provides MIPI CSI-2 VC and DT filtering + capabilities for the Renesas R-Car family of devices. It is used in + conjunction with the R-Car VIN and CSI-2 modules, which provides the video + capture capabilities. + +properties: + compatible: + items: + - enum: + - renesas,r8a779a0-isp # V3U + - renesas,r8a779g0-isp # V4H + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, multiple endpoints describing the connected R-Car + CSI-2 receivers. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 0. + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 1. + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 2. + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 3. + + port@5: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 4. + + port@6: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 5. + + port@7: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 6. + + port@8: + $ref: /schemas/graph.yaml#/properties/port + description: + Single endpoint describing the R-Car VIN connected to output port 7. + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + - port@5 + - port@6 + - port@7 + - port@8 + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a779a0-sysc.h> + + isp1: isp@fed20000 { + compatible = "renesas,r8a779a0-isp"; + reg = <0xfed20000 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 613>; + power-domains = <&sysc R8A779A0_PD_A3ISP01>; + resets = <&cpg 613>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + isp1csi41: endpoint@1 { + reg = <1>; + remote-endpoint = <&csi41isp1>; + }; + }; + + port@1 { + reg = <1>; + isp1vin08: endpoint { + remote-endpoint = <&vin08isp1>; + }; + }; + + port@2 { + reg = <2>; + isp1vin09: endpoint { + remote-endpoint = <&vin09isp1>; + }; + }; + + port@3 { + reg = <3>; + isp1vin10: endpoint { + remote-endpoint = <&vin10isp1>; + }; + }; + + port@4 { + reg = <4>; + isp1vin11: endpoint { + remote-endpoint = <&vin11isp1>; + }; + }; + + port@5 { + reg = <5>; + isp1vin12: endpoint { + remote-endpoint = <&vin12isp1>; + }; + }; + + port@6 { + reg = <6>; + isp1vin13: endpoint { + remote-endpoint = <&vin13isp1>; + }; + }; + + port@7 { + reg = <7>; + isp1vin14: endpoint { + remote-endpoint = <&vin14isp1>; + }; + }; + + port@8 { + reg = <8>; + isp1vin15: endpoint { + remote-endpoint = <&vin15isp1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,jpu.txt b/Documentation/devicetree/bindings/media/renesas,jpu.txt deleted file mode 100644 index d3436e5190f9..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,jpu.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Renesas JPEG Processing Unit - -The JPEG processing unit (JPU) incorporates the JPEG codec with an encoding -and decoding function conforming to the JPEG baseline process, so that the JPU -can encode image data and decode JPEG data quickly. - -Required properties: -- compatible: "renesas,jpu-<soctype>", "renesas,rcar-gen2-jpu" as fallback. - Examples with soctypes are: - - "renesas,jpu-r8a7790" for R-Car H2 - - "renesas,jpu-r8a7791" for R-Car M2-W - - "renesas,jpu-r8a7792" for R-Car V2H - - "renesas,jpu-r8a7793" for R-Car M2-N - - - reg: Base address and length of the registers block for the JPU. - - interrupts: JPU interrupt specifier. - - clocks: A phandle + clock-specifier pair for the JPU functional clock. - -Example: R8A7790 (R-Car H2) JPU node - jpeg-codec@fe980000 { - compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu"; - reg = <0 0xfe980000 0 0x10300>; - interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp1_clks R8A7790_CLK_JPU>; - }; diff --git a/Documentation/devicetree/bindings/media/renesas,jpu.yaml b/Documentation/devicetree/bindings/media/renesas,jpu.yaml new file mode 100644 index 000000000000..2f55968e864f --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,jpu.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,jpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas JPEG Processing Unit + +maintainers: + - Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> + +description: + The JPEG processing unit (JPU) incorporates the JPEG codec with an encoding + and decoding function conforming to the JPEG baseline process, so that the + JPU can encode image data and decode JPEG data quickly. + +properties: + compatible: + items: + - enum: + - renesas,jpu-r8a7790 # R-Car H2 + - renesas,jpu-r8a7791 # R-Car M2-W + - renesas,jpu-r8a7792 # R-Car V2H + - renesas,jpu-r8a7793 # R-Car M2-N + - const: renesas,rcar-gen2-jpu # R-Car Gen2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + + jpeg-codec@fe980000 { + compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu"; + reg = <0xfe980000 0x10300>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 106>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 106>; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml new file mode 100644 index 000000000000..1e72b8808d24 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +description: + The CRU image processing module is a data conversion module equipped with pixel + color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and + parallel (including ITU-R BT.656) input are provided as the image sensor interface. + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-cru # RZ/G2{L,LC} + - renesas,r9a07g054-cru # RZ/V2L + - const: renesas,rzg2l-cru + + reg: + maxItems: 1 + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: image_conv + - const: image_conv_err + - const: axi_mst_err + + clocks: + items: + - description: CRU Main clock + - description: CRU Register access clock + - description: CRU image transfer clock + + clock-names: + items: + - const: video + - const: apb + - const: axi + + power-domains: + maxItems: 1 + + resets: + items: + - description: CRU_PRESETN reset terminal + - description: CRU_ARESETN reset terminal + + reset-names: + items: + - const: presetn + - const: aresetn + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing a parallel input source. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + hsync-active: true + vsync-active: true + bus-width: true + data-shift: true + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, describing the Image Processing module connected to the + CSI-2 receiver. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + +additionalProperties: false + +examples: + # Device node example with CSI-2 + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cru: video@10830000 { + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru"; + reg = <0x10830000 0x400>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; + clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>, + <&cpg CPG_MOD R9A07G044_CRU_PCLK>, + <&cpg CPG_MOD R9A07G044_CRU_ACLK>; + clock-names = "video", "apb", "axi"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_CRU_PRESETN>, + <&cpg R9A07G044_CRU_ARESETN>; + reset-names = "presetn", "aresetn"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + cru_parallel_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&ov5642>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + cru_csi_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi_cru_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml new file mode 100644 index 000000000000..67eea2ac1d22 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +description: + The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L + (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction + with the Image Processing module, which provides the video capture capabilities. + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-csi2 # RZ/G2{L,LC} + - renesas,r9a07g054-csi2 # RZ/V2L + - const: renesas,rzg2l-csi2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Internal clock for connecting CRU and MIPI + - description: CRU Main clock + - description: CRU Register access clock + + clock-names: + items: + - const: system + - const: video + - const: apb + + power-domains: + maxItems: 1 + + resets: + items: + - description: CRU_PRESETN reset terminal + - description: CRU_CMN_RSTB reset terminal + + reset-names: + items: + - const: presetn + - const: cmn-rstb + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + items: + maximum: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port node, Image Processing block connected to the CSI-2 receiver. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - resets + - reset-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + csi: csi@10830400 { + compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2"; + reg = <0x10830400 0xfc00>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>, + <&cpg CPG_MOD R9A07G044_CRU_VCLK>, + <&cpg CPG_MOD R9A07G044_CRU_PCLK>; + clock-names = "system", "video", "apb"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_CRU_PRESETN>, + <&cpg R9A07G044_CRU_CMN_RSTB>; + reset-names = "presetn", "cmn-rstb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi2_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ov5645_ep>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi2cru: endpoint@0 { + reg = <0>; + remote-endpoint = <&crucsi2>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index 1ec947b4781f..5539d0f8e74d 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -24,6 +24,7 @@ properties: oneOf: - items: - enum: + - renesas,vin-r8a7742 # RZ/G1H - renesas,vin-r8a7743 # RZ/G1M - renesas,vin-r8a7744 # RZ/G1N - renesas,vin-r8a7745 # RZ/G1E @@ -40,15 +41,19 @@ properties: - renesas,vin-r8a774a1 # RZ/G2M - renesas,vin-r8a774b1 # RZ/G2N - renesas,vin-r8a774c0 # RZ/G2E + - renesas,vin-r8a774e1 # RZ/G2H - renesas,vin-r8a7778 # R-Car M1 - renesas,vin-r8a7779 # R-Car H1 - renesas,vin-r8a7795 # R-Car H3 - renesas,vin-r8a7796 # R-Car M3-W + - renesas,vin-r8a77961 # R-Car M3-W+ - renesas,vin-r8a77965 # R-Car M3-N - renesas,vin-r8a77970 # R-Car V3M - renesas,vin-r8a77980 # R-Car V3H - renesas,vin-r8a77990 # R-Car E3 - renesas,vin-r8a77995 # R-Car D3 + - renesas,vin-r8a779a0 # R-Car V3U + - renesas,vin-r8a779g0 # R-Car V4H reg: maxItems: 1 @@ -65,17 +70,17 @@ properties: resets: maxItems: 1 - #The per-board settings for Gen2 and RZ/G1 platforms: + # The per-board settings for Gen2 and RZ/G1 platforms: port: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: - A node containing a parallel input with a single endpoint definitions as - documented in - Documentation/devicetree/bindings/media/video-interfaces.txt + A node containing a parallel input properties: endpoint: - type: object + $ref: video-interfaces.yaml# + unevaluatedProperties: false properties: hsync-active: @@ -90,7 +95,7 @@ properties: synchronization is selected. default: 1 - field-active-even: true + field-even-active: true bus-width: true @@ -104,41 +109,27 @@ properties: data-active: true - remote-endpoint: true - - required: - - remote-endpoint - - additionalProperties: false - - additionalProperties: false - - #The per-board settings for Gen3 and RZ/G2 platforms: + # The per-board settings for Gen3 and RZ/G2 platforms: renesas,id: description: VIN channel number - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 15 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 ports: - type: object - description: - A node containing input nodes with endpoint definitions as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Input port node, single endpoint describing a parallel input source. properties: - reg: - const: 0 - endpoint: - type: object + $ref: video-interfaces.yaml# + unevaluatedProperties: false properties: hsync-active: @@ -153,7 +144,7 @@ properties: synchronization is selected. default: 1 - field-active-even: true + field-even-active: true bus-width: true @@ -167,109 +158,61 @@ properties: data-active: true - remote-endpoint: true - - required: - - remote-endpoint - - additionalProperties: false - - required: - - endpoint - - additionalProperties: false - port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Input port node, multiple endpoints describing all the R-Car CSI-2 modules connected the VIN. properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - - reg: - const: 1 - endpoint@0: - type: object + $ref: /schemas/graph.yaml#/properties/endpoint description: Endpoint connected to CSI20. - properties: - reg: - const: 0 - - remote-endpoint: true - - required: - - reg - - remote-endpoint - - additionalProperties: false - endpoint@1: - type: object + $ref: /schemas/graph.yaml#/properties/endpoint description: Endpoint connected to CSI21. - properties: - reg: - const: 1 - - remote-endpoint: true - - required: - - reg - - remote-endpoint - - additionalProperties: false - endpoint@2: - type: object + $ref: /schemas/graph.yaml#/properties/endpoint description: Endpoint connected to CSI40. - properties: - reg: - const: 2 - - remote-endpoint: true - - required: - - reg - - remote-endpoint - - additionalProperties: false - endpoint@3: - type: object + $ref: /schemas/graph.yaml#/properties/endpoint description: Endpoint connected to CSI41. - properties: - reg: - const: 3 - - remote-endpoint: true - - required: - - reg - - remote-endpoint - - additionalProperties: false - anyOf: - required: - - endpoint@0 + - endpoint@0 - required: - - endpoint@1 + - endpoint@1 - required: - - endpoint@2 + - endpoint@2 - required: - - endpoint@3 + - endpoint@3 - additionalProperties: false + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, multiple endpoints describing all the R-Car ISP + modules connected the VIN. + + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to ISP0. + + endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to ISP1. + + endpoint@2: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to ISP2. + + endpoint@3: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to ISP3. required: - compatible @@ -277,23 +220,35 @@ required: - interrupts - clocks - power-domains - - resets - -if: - properties: - compatible: - contains: - enum: - - renesas,vin-r8a7778 - - renesas,vin-r8a7779 - - renesas,rcar-gen2-vin -then: - required: - - port -else: - required: - - renesas,id - - ports + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - renesas,vin-r8a7778 + - renesas,vin-r8a7779 + then: + required: + - resets + + - if: + properties: + compatible: + contains: + enum: + - renesas,vin-r8a7778 + - renesas,vin-r8a7779 + - renesas,rcar-gen2-vin + then: + required: + - port + else: + required: + - renesas,id + - ports additionalProperties: false @@ -307,7 +262,7 @@ examples: vin1: vin@e6ef1000 { compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef1000 0 0x1000>; + reg = <0xe6ef1000 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; @@ -329,7 +284,7 @@ examples: vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7795"; - reg = <0 0xe6ef0000 0 0x1000>; + reg = <0xe6ef0000 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -348,11 +303,11 @@ examples: vin0csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin0>; + remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -366,7 +321,7 @@ examples: vin2: video@e6ef2000 { compatible = "renesas,vin-r8a77970"; - reg = <0 0xe6ef2000 0 0x1000>; + reg = <0xe6ef2000 0x1000>; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt deleted file mode 100644 index cd5a955b2ea0..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,vsp1.txt +++ /dev/null @@ -1,30 +0,0 @@ -* Renesas VSP Video Processing Engine - -The VSP is a video processing engine that supports up-/down-scaling, alpha -blending, color space conversion and various other image processing features. -It can be found in the Renesas R-Car Gen2, R-Car Gen3, RZ/G1, and RZ/G2 SoCs. - -Required properties: - - - compatible: Must contain one of the following values - - "renesas,vsp1" for the R-Car Gen2 and RZ/G1 VSP1 - - "renesas,vsp2" for the R-Car Gen3 and RZ/G2 VSP2 - - - reg: Base address and length of the registers block for the VSP. - - interrupts: VSP interrupt specifier. - - clocks: A phandle + clock-specifier pair for the VSP functional clock. - -Optional properties: - - - renesas,fcp: A phandle referencing the FCP that handles memory accesses - for the VSP. Not needed on Gen2, mandatory on Gen3. - - -Example: R8A7790 (R-Car H2) VSP1-S node - - vsp@fe928000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe928000 0 0x8000>; - interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; - }; diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml new file mode 100644 index 000000000000..3265e922647c --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,vsp1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas VSP Video Processing Engine + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: + The VSP is a video processing engine that supports up-/down-scaling, alpha + blending, color space conversion and various other image processing features. + It can be found in the Renesas R-Car Gen2, R-Car Gen3, RZ/G1, and RZ/G2 SoCs. + +properties: + compatible: + oneOf: + - enum: + - renesas,r9a07g044-vsp2 # RZ/G2L + - renesas,vsp1 # R-Car Gen2 and RZ/G1 + - renesas,vsp2 # R-Car Gen3 and RZ/G2 + - items: + - enum: + - renesas,r9a07g054-vsp2 # RZ/V2L + - const: renesas,r9a07g044-vsp2 # RZ/G2L fallback + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: true + clock-names: true + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,fcp: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A phandle referencing the FCP that handles memory accesses for the VSP. + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: renesas,vsp1 + then: + properties: + renesas,fcp: false + else: + required: + - renesas,fcp + + - if: + properties: + compatible: + contains: + const: renesas,r9a07g044-vsp2 + then: + properties: + clocks: + items: + - description: Main clock + - description: Register access clock + - description: Video clock + clock-names: + items: + - const: aclk + - const: pclk + - const: vclk + required: + - clock-names + else: + properties: + clocks: + maxItems: 1 + clock-names: false + +examples: + # R8A7790 (R-Car H2) VSP1-S + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0xfe928000 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; + + # R8A77951 (R-Car H3) VSP2-BC + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + vsp@fe920000 { + compatible = "renesas,vsp2"; + reg = <0xfe920000 0x8000>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 624>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 624>; + + renesas,fcp = <&fcpvb1>; + }; +... diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml new file mode 100644 index 000000000000..9d90d8d0565a --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/rockchip,rk3568-vepu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hantro G1 VPU encoders implemented on Rockchip SoCs + +maintainers: + - Nicolas Frattaroli <frattaroli.nicolas@gmail.com> + +description: + Hantro G1 video encode-only accelerators present on Rockchip SoCs. + +properties: + compatible: + enum: + - rockchip,rk3568-vepu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: aclk + - const: hclk + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3568-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3568-power.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + vepu: video-codec@fdee0000 { + compatible = "rockchip,rk3568-vepu"; + reg = <0x0 0xfdee0000 0x0 0x800>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>; + clock-names = "aclk", "hclk"; + iommus = <&vepu_mmu>; + power-domains = <&power RK3568_PD_RGA>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml new file mode 100644 index 000000000000..08b02ec16755 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/rockchip,vdec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Video Decoder (VDec) + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: |- + The Rockchip rk3399 has a stateless Video Decoder that can decodes H.264, + HEVC an VP9 streams. + +properties: + compatible: + oneOf: + - const: rockchip,rk3399-vdec + - items: + - enum: + - rockchip,rk3228-vdec + - rockchip,rk3328-vdec + - const: rockchip,rk3399-vdec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The Video Decoder AXI interface clock + - description: The Video Decoder AHB interface clock + - description: The Video Decoded CABAC clock + - description: The Video Decoder core clock + + clock-names: + items: + - const: axi + - const: ahb + - const: cabac + - const: core + + assigned-clocks: true + + assigned-clock-rates: true + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/power/rk3399-power.h> + + vdec: video-codec@ff660000 { + compatible = "rockchip,rk3399-vdec"; + reg = <0xff660000 0x400>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>, + <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>; + clock-names = "axi", "ahb", "cabac", "core"; + power-domains = <&power RK3399_PD_VDU>; + iommus = <&vdec_mmu>; + }; + +... diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml new file mode 100644 index 000000000000..afcaa427d48b --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml @@ -0,0 +1,295 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/rockchip-isp1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC Image Signal Processing unit v1 + +maintainers: + - Helen Koike <helen.koike@collabora.com> + +description: | + Rockchip ISP1 is the Camera interface for the Rockchip series of SoCs + which contains image processing, scaling, and compression functions. + +properties: + compatible: + enum: + - rockchip,px30-cif-isp + - rockchip,rk3399-cif-isp + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 3 + + interrupt-names: + items: + - const: isp + - const: mi + - const: mipi + + clocks: + minItems: 3 + items: + # isp0 and isp1 + - description: ISP clock + - description: ISP AXI clock + - description: ISP AHB clock + # only for isp1 + - description: ISP Pixel clock + + clock-names: + minItems: 3 + items: + # isp0 and isp1 + - const: isp + - const: aclk + - const: hclk + # only for isp1 + - const: pclk + + iommus: + maxItems: 1 + + phys: + maxItems: 1 + description: phandle for the PHY port + + phy-names: + const: dphy + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: connection point for sensors at MIPI-DPHY RX0 + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: connection point for input on the parallel interface + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: [5, 6] + + required: + - bus-type + + anyOf: + - required: + - port@0 + - required: + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - iommus + - phys + - phy-names + - power-domains + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3399-cif-isp + then: + properties: + clocks: + minItems: 3 + maxItems: 4 + clock-names: + minItems: 3 + maxItems: 4 + + - if: + properties: + compatible: + contains: + const: rockchip,px30-cif-isp + then: + required: + - interrupt-names + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3399-power.h> + + parent0: parent { + #address-cells = <2>; + #size-cells = <2>; + + isp0: isp0@ff910000 { + compatible = "rockchip,rk3399-cif-isp"; + reg = <0x0 0xff910000 0x0 0x4000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_ISP0>, + <&cru ACLK_ISP0_WRAPPER>, + <&cru HCLK_ISP0_WRAPPER>; + clock-names = "isp", "aclk", "hclk"; + iommus = <&isp0_mmu>; + phys = <&dphy>; + phy-names = "dphy"; + power-domains = <&power RK3399_PD_ISP0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_in_wcam: endpoint@0 { + reg = <0>; + remote-endpoint = <&wcam_out>; + data-lanes = <1 2>; + }; + + mipi_in_ucam: endpoint@1 { + reg = <1>; + remote-endpoint = <&ucam_out>; + data-lanes = <1>; + }; + }; + }; + }; + + i2c7: i2c { + #address-cells = <1>; + #size-cells = <0>; + + wcam: camera@36 { + compatible = "ovti,ov5695"; + reg = <0x36>; + clocks = <&cru SCLK_TESTCLKOUT1>; + + port { + wcam_out: endpoint { + remote-endpoint = <&mipi_in_wcam>; + data-lanes = <1 2>; + }; + }; + }; + + ucam: camera@3c { + compatible = "ovti,ov2685"; + reg = <0x3c>; + + clocks = <&cru SCLK_TESTCLKOUT1>; + clock-names = "xvclk"; + + avdd-supply = <&pp2800_cam>; + dovdd-supply = <&pp1800>; + dvdd-supply = <&pp1800>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1>; + }; + }; + }; + }; + }; + + - | + + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/px30-power.h> + + parent1: parent { + #address-cells = <2>; + #size-cells = <2>; + + isp: isp@ff4a0000 { + compatible = "rockchip,px30-cif-isp"; + reg = <0x0 0xff4a0000 0x0 0x8000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "isp", "mi", "mipi"; + clocks = <&cru SCLK_ISP0>, + <&cru ACLK_ISP0_WRAPPER>, + <&cru HCLK_ISP0_WRAPPER>, + <&cru PCLK_ISP1_WRAPPER>; + clock-names = "isp", "aclk", "hclk", "pclk"; + iommus = <&isp_mmu>; + phys = <&csi_dphy>; + phy-names = "dphy"; + power-domains = <&power PX30_PD_VI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_in_ucam1: endpoint@0 { + reg = <0>; + remote-endpoint = <&ucam1_out>; + data-lanes = <1 2>; + }; + }; + }; + }; + + i2c2: i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov5695: camera@36 { + compatible = "ovti,ov5647"; + reg = <0x36>; + clocks = <&cru SCLK_CIF_OUT>; + + port { + ucam1_out: endpoint { + remote-endpoint = <&mipi_in_ucam1>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.txt b/Documentation/devicetree/bindings/media/rockchip-rga.txt deleted file mode 100644 index c53a8e5133f6..000000000000 --- a/Documentation/devicetree/bindings/media/rockchip-rga.txt +++ /dev/null @@ -1,34 +0,0 @@ -device-tree bindings for rockchip 2D raster graphic acceleration controller (RGA) - -RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D -graphics operations, such as point/line drawing, image scaling, rotation, -BitBLT, alpha blending and image blur/sharpness. - -Required properties: -- compatible: value should be one of the following - "rockchip,rk3228-rga", "rockchip,rk3288-rga": for Rockchip RK3228 - "rockchip,rk3288-rga": for Rockchip RK3288 - "rockchip,rk3399-rga": for Rockchip RK3399 - -- interrupts: RGA interrupt specifier. - -- clocks: phandle to RGA sclk/hclk/aclk clocks - -- clock-names: should be "aclk", "hclk" and "sclk" - -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: should be "core", "axi" and "ahb" - -Example: -SoC-specific DT entry: - rga: rga@ff680000 { - compatible = "rockchip,rk3399-rga"; - reg = <0xff680000 0x10000>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; - clock-names = "aclk", "hclk", "sclk"; - - resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; - reset-names = "core, "axi", "ahb"; - }; diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.yaml b/Documentation/devicetree/bindings/media/rockchip-rga.yaml new file mode 100644 index 000000000000..ea2342222408 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip-rga.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/rockchip-rga.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip 2D raster graphic acceleration controller (RGA) + +description: + RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D + graphics operations, such as point/line drawing, image scaling, rotation, + BitBLT, alpha blending and image blur/sharpness. + +maintainers: + - Jacob Chen <jacob-chen@iotwrt.com> + - Ezequiel Garcia <ezequiel@collabora.com> + +properties: + compatible: + oneOf: + - const: rockchip,rk3288-rga + - const: rockchip,rk3399-rga + - items: + - enum: + - rockchip,rk3228-rga + - rockchip,rk3568-rga + - const: rockchip,rk3288-rga + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: aclk + - const: hclk + - const: sclk + + power-domains: + maxItems: 1 + + resets: + maxItems: 3 + + reset-names: + items: + - const: core + - const: axi + - const: ahb + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3399-power.h> + rga: rga@ff680000 { + compatible = "rockchip,rk3399-rga"; + reg = <0xff680000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_RGA>, + <&cru HCLK_RGA>, + <&cru SCLK_RGA_CORE>; + clock-names = "aclk", "hclk", "sclk"; + power-domains = <&power RK3399_PD_RGA>; + resets = <&cru SRST_RGA_CORE>, + <&cru SRST_A_RGA>, + <&cru SRST_H_RGA>; + reset-names = "core", "axi", "ahb"; + }; diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.txt b/Documentation/devicetree/bindings/media/rockchip-vpu.txt deleted file mode 100644 index 339252d9c515..000000000000 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.txt +++ /dev/null @@ -1,43 +0,0 @@ -device-tree bindings for rockchip VPU codec - -Rockchip (Video Processing Unit) present in various Rockchip platforms, -such as RK3288, RK3328 and RK3399. - -Required properties: -- compatible: value should be one of the following - "rockchip,rk3288-vpu"; - "rockchip,rk3328-vpu"; - "rockchip,rk3399-vpu"; -- interrupts: encoding and decoding interrupt specifiers -- interrupt-names: should be - "vepu", "vdpu" on RK3288 and RK3399, - "vdpu" on RK3328. -- clocks: phandle to VPU aclk, hclk clocks -- clock-names: should be "aclk" and "hclk" -- power-domains: phandle to power domain node -- iommus: phandle to a iommu node - -Example: -SoC-specific DT entry: - vpu: video-codec@ff9a0000 { - compatible = "rockchip,rk3288-vpu"; - reg = <0x0 0xff9a0000 0x0 0x800>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vepu", "vdpu"; - clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; - clock-names = "aclk", "hclk"; - power-domains = <&power RK3288_PD_VIDEO>; - iommus = <&vpu_mmu>; - }; - - vpu: video-codec@ff350000 { - compatible = "rockchip,rk3328-vpu"; - reg = <0x0 0xff350000 0x0 0x800>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vdpu"; - clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; - clock-names = "aclk", "hclk"; - power-domains = <&power RK3328_PD_VPU>; - iommus = <&vpu_mmu>; - }; diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml new file mode 100644 index 000000000000..c57e1f488895 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/rockchip-vpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hantro G1 VPU codecs implemented on Rockchip SoCs + +maintainers: + - Ezequiel Garcia <ezequiel@collabora.com> + +description: + Hantro G1 video encode and decode accelerators present on Rockchip SoCs. + +properties: + compatible: + oneOf: + - enum: + - rockchip,rk3036-vpu + - rockchip,rk3066-vpu + - rockchip,rk3288-vpu + - rockchip,rk3328-vpu + - rockchip,rk3399-vpu + - rockchip,px30-vpu + - rockchip,rk3568-vpu + - rockchip,rk3588-av1-vpu + - items: + - const: rockchip,rk3188-vpu + - const: rockchip,rk3066-vpu + - items: + - const: rockchip,rk3228-vpu + - const: rockchip,rk3399-vpu + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + oneOf: + - const: vdpu + - items: + - const: vepu + - const: vdpu + + clocks: + oneOf: + - maxItems: 2 + - maxItems: 4 + + clock-names: + oneOf: + - items: + - const: aclk + - const: hclk + - items: + - const: aclk_vdpu + - const: hclk_vdpu + - const: aclk_vepu + - const: hclk_vepu + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + resets: + items: + - description: AXI reset line + - description: AXI bus interface unit reset line + - description: APB reset line + - description: APB bus interface unit reset line + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3288-power.h> + + vpu: video-codec@ff9a0000 { + compatible = "rockchip,rk3288-vpu"; + reg = <0xff9a0000 0x800>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "hclk"; + power-domains = <&power RK3288_PD_VIDEO>; + iommus = <&vpu_mmu>; + }; diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt deleted file mode 100644 index e847291d4aff..000000000000 --- a/Documentation/devicetree/bindings/media/s5p-cec.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Samsung HDMI CEC driver - -The HDMI CEC module is present is Samsung SoCs and its purpose is to -handle communication between HDMI connected devices over the CEC bus. - -Required properties: - - compatible : value should be following - "samsung,s5p-cec" - - - reg : Physical base address of the IP registers and length of memory - mapped region. - - - interrupts : HDMI CEC interrupt number to the CPU. - - clocks : from common clock binding: handle to HDMI CEC clock. - - clock-names : from common clock binding: must contain "hdmicec", - corresponding to entry in the clocks property. - - samsung,syscon-phandle - phandle to the PMU system controller - - hdmi-phandle - phandle to the HDMI controller, see also cec.txt. - -Optional: - - needs-hpd : if present the CEC support is only available when the HPD - is high. See cec.txt for more details. - -Example: - -hdmicec: cec@100b0000 { - compatible = "samsung,s5p-cec"; - reg = <0x100B0000 0x200>; - interrupts = <0 114 0>; - clocks = <&clock CLK_HDMI_CEC>; - clock-names = "hdmicec"; - samsung,syscon-phandle = <&pmu_system_controller>; - hdmi-phandle = <&hdmi>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; -}; diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt index aa54c8159d9f..e69de29bb2d1 100644 --- a/Documentation/devicetree/bindings/media/s5p-mfc.txt +++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt @@ -1,76 +0,0 @@ -* Samsung Multi Format Codec (MFC) - -Multi Format Codec (MFC) is the IP present in Samsung SoCs which -supports high resolution decoding and encoding functionalities. -The MFC device driver is a v4l2 driver which can encode/decode -video raw/elementary streams and has support for all popular -video codecs. - -Required properties: - - compatible : value should be either one among the following - (a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs - (b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs - (c) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC - (d) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC - (e) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC - (f) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC - - - reg : Physical base address of the IP registers and length of memory - mapped region. - - - interrupts : MFC interrupt number to the CPU. - - clocks : from common clock binding: handle to mfc clock. - - clock-names : from common clock binding: must contain "mfc", - corresponding to entry in the clocks property. - -Optional properties: - - power-domains : power-domain property defined with a phandle - to respective power domain. - - memory-region : from reserved memory binding: phandles to two reserved - memory regions, first is for "left" mfc memory bus interfaces, - second if for the "right" mfc memory bus, used when no SYSMMU - support is available; used only by MFC v5 present in Exynos4 SoCs - -Obsolete properties: - - samsung,mfc-r, samsung,mfc-l : support removed, please use memory-region - property instead - - -Example: -SoC specific DT entry: - -mfc: codec@13400000 { - compatible = "samsung,mfc-v5"; - reg = <0x13400000 0x10000>; - interrupts = <0 94 0>; - power-domains = <&pd_mfc>; - clocks = <&clock 273>; - clock-names = "mfc"; -}; - -Reserved memory specific DT entry for given board (see reserved memory binding -for more information): - -reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mfc_left: region@51000000 { - compatible = "shared-dma-pool"; - no-map; - reg = <0x51000000 0x800000>; - }; - - mfc_right: region@43000000 { - compatible = "shared-dma-pool"; - no-map; - reg = <0x43000000 0x800000>; - }; -}; - -Board specific DT entry: - -codec@13400000 { - memory-region = <&mfc_left>, <&mfc_right>; -}; diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml new file mode 100644 index 000000000000..dd6cc7ac1f7c --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,exynos4210-csis.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +properties: + compatible: + enum: + - samsung,s5pv210-csis + - samsung,exynos4210-csis + - samsung,exynos4212-csis + - samsung,exynos5250-csis + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4] + description: + Number of data lines supported. + + clocks: + maxItems: 2 + + clock-names: + items: + - const: csis + - const: sclk_csis + + clock-frequency: + default: 166000000 + description: + The IP's main (system bus) clock frequency in Hz. + + interrupts: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + items: + - const: csis + + power-domains: + maxItems: 1 + + vddio-supply: + description: MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V). + + vddcore-supply: + description: MIPI CSIS Core voltage supply (e.g. 1.1V). + +patternProperties: + "^port@[34]$": + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + description: + Camera input port. + + properties: + reg: + enum: [3, 4] + + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + samsung,csis-hs-settle: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Differential receiver (HS-RX) settle time. + + samsung,csis-wclk: + type: boolean + description: + CSI-2 wrapper clock selection. If this property is present external clock + from CMU will be used, or the bus clock if it's not specified. + + required: + - data-lanes + + required: + - reg + +required: + - compatible + - reg + - bus-width + - clocks + - clock-names + - interrupts + - vddio-supply + - vddcore-supply + +anyOf: + - required: + - port@3 + - required: + - port@4 + +allOf: + - if: + required: + - samsung,isp-wb + then: + required: + - samsung,sysreg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + csis@11890000 { + compatible = "samsung,exynos4210-csis"; + reg = <0x11890000 0x4000>; + clocks = <&clock CLK_CSIS1>, + <&clock CLK_SCLK_CSIS1>; + clock-names = "csis", "sclk_csis"; + assigned-clocks = <&clock CLK_MOUT_CSIS1>, + <&clock CLK_SCLK_CSIS1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + + bus-width = <2>; + power-domains = <&pd_cam>; + phys = <&mipi_phy 2>; + phy-names = "csis"; + + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + + #address-cells = <1>; + #size-cells = <0>; + + /* Camera D (4) MIPI CSI-2 (CSIS1) */ + port@4 { + reg = <4>; + + endpoint { + remote-endpoint = <&is_s5k6a3_ep>; + data-lanes = <1>; + samsung,csis-hs-settle = <18>; + samsung,csis-wclk; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml new file mode 100644 index 000000000000..271d0577a83c --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,exynos4210-fimc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5P/Exynos SoC Fully Integrated Mobile Camera + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: + Each FIMC device should have an alias in the aliases node, in the form of + fimc<n>, where <n> is an integer specifying the IP block instance. + +properties: + compatible: + enum: + - samsung,exynos4210-fimc + - samsung,exynos4212-fimc + - samsung,s5pv210-fimc + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: fimc + - const: sclk_fimc + + clock-frequency: + description: + Maximum FIMC local clock (LCLK) frequency. + + interrupts: + maxItems: 1 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + samsung,cam-if: + type: boolean + description: + The FIMC IP block includes the camera input interface. + + samsung,isp-wb: + type: boolean + description: | + The FIMC IP block has the ISP writeback input. + + samsung,lcd-wb: + type: boolean + description: | + The FIMC IP block has the LCD writeback input. + + samsung,mainscaler-ext: + type: boolean + description: + FIMC IP supports extended image size and has CIEXTEN register. + + samsung,min-pix-alignment: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: Minimum supported image height alignment. + - description: Horizontal image offset. + description: + The values are in pixels and default is <2 1>. + + samsung,min-pix-sizes: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + description: | + An array specyfing minimum image size in pixels at the FIMC input and + output DMA, in the first and second cell respectively. Default value + is <16 16>. + + samsung,pix-limits: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 4 + description: | + An array of maximum supported image sizes in pixels, for details refer to + Table 2-1 in the S5PV210 SoC User Manual. The meaning of each cell is as + follows: + 0 - scaler input horizontal size + 1 - input horizontal size for the scaler bypassed + 2 - REAL_WIDTH without input rotation + 3 - REAL_HEIGHT with input rotation + + samsung,rotators: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x11 + description: | + A bitmask specifying whether this IP has the input and the output + rotator. Bits 4 and 0 correspond to input and output rotator + respectively. If a rotator is present its corresponding bit should be + set. + + samsung,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + System Registers (SYSREG) node. + +required: + - compatible + - reg + - clocks + - clock-names + - samsung,pix-limits + +allOf: + - if: + required: + - samsung,isp-wb + then: + required: + - samsung,sysreg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + fimc@11800000 { + compatible = "samsung,exynos4212-fimc"; + reg = <0x11800000 0x1000>; + clocks = <&clock CLK_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + clock-names = "fimc", "sclk_fimc"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&sysmmu_fimc0>; + power-domains = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; + + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml new file mode 100644 index 000000000000..3a5ff3f47060 --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml @@ -0,0 +1,225 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-is.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: + The FIMC-IS is a subsystem for processing image signal from an image sensor. + The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5 + processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C + and SPI bus controllers, PWM and ADC. + +properties: + compatible: + enum: + - samsung,exynos4212-fimc-is + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + clocks: + maxItems: 21 + + clock-names: + items: + - const: lite0 + - const: lite1 + - const: ppmuispx + - const: ppmuispmx + - const: isp + - const: drc + - const: fd + - const: mcuisp + - const: gicisp + - const: mcuctl_isp + - const: pwm_isp + - const: ispdiv0 + - const: ispdiv1 + - const: mcuispdiv0 + - const: mcuispdiv1 + - const: mpll + - const: aclk200 + - const: aclk400mcuisp + - const: div_aclk200 + - const: div_aclk400mcuisp + - const: uart + + interrupts: + maxItems: 2 + + iommus: + maxItems: 4 + + iommu-names: + items: + - const: isp + - const: drc + - const: fd + - const: mcuctl + + power-domains: + maxItems: 1 + + samsung,pmu-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Power Management Unit (PMU) system controller interface, used to + power/start the ISP. + +patternProperties: + "^pmu@[0-9a-f]+$": + type: object + additionalProperties: false + deprecated: true + description: + Node representing the SoC's Power Management Unit (duplicated with the + correct PMU node in the SoC). Deprecated, use samsung,pmu-syscon. + + properties: + reg: + maxItems: 1 + + required: + - reg + + "^i2c-isp@[0-9a-f]+$": + type: object + $ref: /schemas/i2c/i2c-controller.yaml# + unevaluatedProperties: false + description: + ISP I2C bus controller + + properties: + compatible: + const: samsung,exynos4212-i2c-isp + + reg: + maxItems: 1 + + + clocks: + maxItems: 1 + + clock-names: + items: + - const: i2c_isp + + pinctrl-0: true + pinctrl-names: + items: + - const: default + + required: + - compatible + - reg + - clocks + - clock-names + +required: + - compatible + - reg + - '#address-cells' + - clocks + - clock-names + - interrupts + - ranges + - samsung,pmu-syscon + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + fimc-is@12000000 { + compatible = "samsung,exynos4212-fimc-is"; + reg = <0x12000000 0x260000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>, + <&isp_clock CLK_ISP_FIMC_LITE1>, + <&isp_clock CLK_ISP_PPMUISPX>, + <&isp_clock CLK_ISP_PPMUISPMX>, + <&isp_clock CLK_ISP_FIMC_ISP>, + <&isp_clock CLK_ISP_FIMC_DRC>, + <&isp_clock CLK_ISP_FIMC_FD>, + <&isp_clock CLK_ISP_MCUISP>, + <&isp_clock CLK_ISP_GICISP>, + <&isp_clock CLK_ISP_MCUCTL_ISP>, + <&isp_clock CLK_ISP_PWM_ISP>, + <&isp_clock CLK_ISP_DIV_ISP0>, + <&isp_clock CLK_ISP_DIV_ISP1>, + <&isp_clock CLK_ISP_DIV_MCUISP0>, + <&isp_clock CLK_ISP_DIV_MCUISP1>, + <&clock CLK_MOUT_MPLL_USER_T>, + <&clock CLK_ACLK200>, + <&clock CLK_ACLK400_MCUISP>, + <&clock CLK_DIV_ACLK200>, + <&clock CLK_DIV_ACLK400_MCUISP>, + <&clock CLK_UART_ISP_SCLK>; + clock-names = "lite0", "lite1", "ppmuispx", + "ppmuispmx", "isp", + "drc", "fd", "mcuisp", + "gicisp", "mcuctl_isp", "pwm_isp", + "ispdiv0", "ispdiv1", "mcuispdiv0", + "mcuispdiv1", "mpll", "aclk200", + "aclk400mcuisp", "div_aclk200", + "div_aclk400mcuisp", "uart"; + iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, + <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; + iommu-names = "isp", "drc", "fd", "mcuctl"; + power-domains = <&pd_isp>; + samsung,pmu-syscon = <&pmu_system_controller>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c-isp@12140000 { + compatible = "samsung,exynos4212-i2c-isp"; + reg = <0x12140000 0x100>; + clocks = <&isp_clock CLK_ISP_I2C1_ISP>; + clock-names = "i2c_isp"; + pinctrl-0 = <&fimc_is_i2c1>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + image-sensor@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + afvdd-supply = <&ldo19_reg>; + clock-frequency = <24000000>; + clocks = <&camera 1>; + clock-names = "extclk"; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; + + port { + endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml new file mode 100644 index 000000000000..f80eca0a4f41 --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-lite.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC series camera host interface (FIMC-LITE) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: + Each FIMC device should have an alias in the aliases node, in the form of + fimc-lite<n>, where <n> is an integer specifying the IP block instance. + +properties: + compatible: + enum: + - samsung,exynos4212-fimc-lite + - samsung,exynos5250-fimc-lite + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: flite + + interrupts: + maxItems: 1 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + fimc-lite@12390000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x12390000 0x1000>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>; + clock-names = "flite"; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + iommus = <&sysmmu_fimc_lite0>; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml new file mode 100644 index 000000000000..878397830a4d --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,exynos5250-gsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC G-Scaler + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Seung-Woo Kim <sw0312.kim@samsung.com + +description: + G-Scaler is used for scaling and color space conversion on Samsung Exynos + SoCs. + + Each G-Scaler node should have a numbered alias in the aliases node, in the + form of gscN, N = 0...3. + +properties: + compatible: + oneOf: + - items: + - enum: + - samsung,exynos5250-gsc + - samsung,exynos5420-gsc + - const: samsung,exynos5-gsc + - enum: + - samsung,exynos5433-gsc + - const: samsung,exynos5-gsc + deprecated: True + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + interrupts: + maxItems: 1 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + samsung,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Syscon used to control the system registers to set writeback input and destination. + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5-gsc + - samsung,exynos5250-gsc + - samsung,exynos5420-gsc + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: gscl + else: + properties: + clocks: + minItems: 5 + clock-names: + items: + - const: pclk + - const: aclk + - const: aclk_xiu + - const: aclk_gsclbend + - const: gsd + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5250.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + video-scaler@13e00000 { + compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; + reg = <0x13e00000 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_gsc>; + clocks = <&clock CLK_GSCL0>; + clock-names = "gscl"; + iommus = <&sysmmu_gsc0>; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml new file mode 100644 index 000000000000..7808d61f1fa3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml @@ -0,0 +1,277 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,fimc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5P/Exynos SoC Camera Subsystem (FIMC) + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: | + The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices + represented by separate device tree nodes. Currently this includes: Fully + Integrated Mobile Camera (FIMC, in the S5P SoCs series known as CAMIF), MIPI + CSIS, FIMC-LITE and FIMC-IS (ISP). + +properties: + compatible: + const: samsung,fimc + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + '#clock-cells': + const: 1 + description: | + The clock specifier cell stores an index of a clock: 0, 1 for + CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively. + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + items: + - const: sclk_cam0 + - const: sclk_cam1 + - const: pxl_async0 + - const: pxl_async1 + + clock-output-names: + maxItems: 2 + + parallel-ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Active parallel video input ports. + + patternProperties: + "^port@[01]$": + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Camera A and camera B inputs. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: idle + - const: active_a + - const: active_b + +patternProperties: + "^csis@[0-9a-f]+$": + type: object + $ref: samsung,exynos4210-csis.yaml# + description: MIPI CSI-2 receiver. + + "^fimc@[0-9a-f]+$": + type: object + $ref: samsung,exynos4210-fimc.yaml# + description: Fully Integrated Mobile Camera. + + "^fimc-is@[0-9a-f]+$": + type: object + $ref: samsung,exynos4212-fimc-is.yaml# + description: Imaging Subsystem (FIMC-IS). + + "^fimc-lite@[0-9a-f]+$": + type: object + $ref: samsung,exynos4212-fimc-lite.yaml# + description: Camera host interface (FIMC-LITE). + +required: + - compatible + - '#address-cells' + - '#clock-cells' + - clocks + - clock-names + - clock-output-names + - ranges + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + camera@11800000 { + compatible = "samsung,fimc"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xba1000>; + + clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, + <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + clock-output-names = "cam_a_clkout", "cam_b_clkout"; + + assigned-clocks = <&clock CLK_MOUT_CAM0>, + <&clock CLK_MOUT_CAM1>; + assigned-clock-parents = <&clock CLK_XUSBXTI>, + <&clock CLK_XUSBXTI>; + + pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; + pinctrl-names = "default"; + + fimc@0 { + compatible = "samsung,exynos4212-fimc"; + reg = <0x00000000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + clock-names = "fimc", "sclk_fimc"; + power-domains = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc0>; + + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; + }; + + /* ... FIMC 1-3 */ + + csis@80000 { + compatible = "samsung,exynos4210-csis"; + reg = <0x00080000 0x4000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_CSIS0>, + <&clock CLK_SCLK_CSIS0>; + clock-names = "csis", "sclk_csis"; + assigned-clocks = <&clock CLK_MOUT_CSIS0>, + <&clock CLK_SCLK_CSIS0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + bus-width = <4>; + power-domains = <&pd_cam>; + phys = <&mipi_phy 0>; + phy-names = "csis"; + #address-cells = <1>; + #size-cells = <0>; + + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + + /* Camera C (3) MIPI CSI-2 (CSIS0) */ + port@3 { + reg = <3>; + endpoint { + remote-endpoint = <&s5c73m3_ep>; + data-lanes = <1 2 3 4>; + samsung,csis-hs-settle = <12>; + }; + }; + }; + + /* ... CSIS 1 */ + + fimc-lite@b90000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0xb90000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>; + clock-names = "flite"; + iommus = <&sysmmu_fimc_lite0>; + }; + + /* ... FIMC-LITE 1 */ + + fimc-is@800000 { + compatible = "samsung,exynos4212-fimc-is"; + reg = <0x00800000 0x260000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>, + <&isp_clock CLK_ISP_FIMC_LITE1>, + <&isp_clock CLK_ISP_PPMUISPX>, + <&isp_clock CLK_ISP_PPMUISPMX>, + <&isp_clock CLK_ISP_FIMC_ISP>, + <&isp_clock CLK_ISP_FIMC_DRC>, + <&isp_clock CLK_ISP_FIMC_FD>, + <&isp_clock CLK_ISP_MCUISP>, + <&isp_clock CLK_ISP_GICISP>, + <&isp_clock CLK_ISP_MCUCTL_ISP>, + <&isp_clock CLK_ISP_PWM_ISP>, + <&isp_clock CLK_ISP_DIV_ISP0>, + <&isp_clock CLK_ISP_DIV_ISP1>, + <&isp_clock CLK_ISP_DIV_MCUISP0>, + <&isp_clock CLK_ISP_DIV_MCUISP1>, + <&clock CLK_MOUT_MPLL_USER_T>, + <&clock CLK_ACLK200>, + <&clock CLK_ACLK400_MCUISP>, + <&clock CLK_DIV_ACLK200>, + <&clock CLK_DIV_ACLK400_MCUISP>, + <&clock CLK_UART_ISP_SCLK>; + clock-names = "lite0", "lite1", "ppmuispx", + "ppmuispmx", "isp", + "drc", "fd", "mcuisp", + "gicisp", "mcuctl_isp", "pwm_isp", + "ispdiv0", "ispdiv1", "mcuispdiv0", + "mcuispdiv1", "mpll", "aclk200", + "aclk400mcuisp", "div_aclk200", + "div_aclk400mcuisp", "uart"; + iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, + <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; + iommu-names = "isp", "drc", "fd", "mcuctl"; + power-domains = <&pd_isp>; + samsung,pmu-syscon = <&pmu_system_controller>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c-isp@940000 { + compatible = "samsung,exynos4212-i2c-isp"; + reg = <0x00940000 0x100>; + clocks = <&isp_clock CLK_ISP_I2C1_ISP>; + clock-names = "i2c_isp"; + pinctrl-0 = <&fimc_is_i2c1>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + image-sensor@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + afvdd-supply = <&ldo19_reg>; + clock-frequency = <24000000>; + /* CAM_B_CLKOUT */ + clocks = <&camera 1>; + clock-names = "extclk"; + gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; + + port { + endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml new file mode 100644 index 000000000000..1b75390fdaac --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml @@ -0,0 +1,165 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,s5c73m3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5C73M3 8Mp camera ISP + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: + The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) + video data busses. The I2C bus is the main control bus and additionally the + SPI bus is used, mostly for transferring the firmware to and from the + device. Two slave device nodes corresponding to these control bus + interfaces are required and should be placed under respective bus + controller nodes. + +properties: + compatible: + const: samsung,s5c73m3 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: cis_extclk + + clock-frequency: + default: 24000000 + description: cis_extclk clock frequency. + + standby-gpios: + maxItems: 1 + description: STANDBY pin. + + vdda-supply: + description: Analog power supply (1.2V). + + vdd-af-supply: + description: lens power supply (2.8V). + + vddio-cis-supply: + description: CIS I/O power supply (1.2V to 1.8V). + + vddio-host-supply: + description: Host I/O power supply (1.8V to 2.8V). + + vdd-int-supply: + description: Digital power supply (1.2V). + + vdd-reg-supply: + description: Regulator input power supply (2.8V). + + xshutdown-gpios: + maxItems: 1 + description: XSHUTDOWN pin. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + required: + - spi-max-frequency + then: + properties: + # The SPI node is simplified firmware-transfer interface only + clocks: false + clock-names: false + standby-gpios: false + vdda-supply: false + vdd-af-supply: false + vddio-cis-supply: false + vddio-host-supply: false + vdd-int-supply: false + vdd-reg-supply: false + xshutdown-gpios: false + port: false + else: + required: + - clocks + - clock-names + - standby-gpios + - vdda-supply + - vdd-af-supply + - vddio-cis-supply + - vddio-host-supply + - vdd-int-supply + - vdd-reg-supply + - xshutdown-gpios + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + image-sensor@3c { + compatible = "samsung,s5c73m3"; + reg = <0x3c>; + clock-frequency = <24000000>; + clocks = <&camera 0>; + clock-names = "cis_extclk"; + standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>; + vdda-supply = <&cam_vdda_reg>; + vdd-af-supply = <&cam_af_reg>; + vddio-cis-supply = <&ldo9_reg>; + vddio-host-supply = <&ldo18_reg>; + vdd-int-supply = <&buck9_reg>; + vdd-reg-supply = <&cam_io_reg>; + xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ + + port { + s5c73m3_ep: endpoint { + remote-endpoint = <&csis0_ep>; + data-lanes = <1 2 3 4>; + }; + }; + }; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + image-sensor@0 { + compatible = "samsung,s5c73m3"; + reg = <0>; + spi-max-frequency = <50000000>; + controller-data { + samsung,spi-feedback-delay = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml new file mode 100644 index 000000000000..b46cc780703c --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml @@ -0,0 +1,195 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,s5p-mfc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Multi Format Codec (MFC) + +maintainers: + - Marek Szyprowski <m.szyprowski@samsung.com> + - Aakarsh Jain <aakarsh.jain@samsung.com> + +description: + Multi Format Codec (MFC) is the IP present in Samsung SoCs which + supports high resolution decoding and encoding functionalities. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos5433-mfc # Exynos5433 + - samsung,mfc-v5 # Exynos4 + - samsung,mfc-v6 # Exynos5 + - samsung,mfc-v7 # Exynos5420 + - samsung,mfc-v8 # Exynos5800 + - samsung,mfc-v10 # Exynos7880 + - tesla,fsd-mfc # Tesla FSD + - items: + - enum: + - samsung,exynos3250-mfc # Exynos3250 + - const: samsung,mfc-v7 # Fall back for Exynos3250 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + interrupts: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 2 + + iommu-names: + minItems: 1 + items: + - const: left + - const: right + + power-domains: + maxItems: 1 + + memory-region: + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-mfc + then: + properties: + clocks: + maxItems: 2 + clock-names: + items: + - const: mfc + - const: sclk_mfc + iommus: + maxItems: 1 + iommu-names: false + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5433-mfc + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pclk + - const: aclk + - const: aclk_xiu + iommus: + minItems: 2 + iommu-names: + minItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - samsung,mfc-v5 + then: + properties: + clocks: + maxItems: 2 + clock-names: + items: + - const: mfc + - const: sclk_mfc + iommus: + minItems: 2 + iommu-names: + minItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - samsung,mfc-v6 + - samsung,mfc-v8 + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: mfc + iommus: + minItems: 2 + iommu-names: + minItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - samsung,mfc-v7 + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - tesla,fsd-mfc + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: mfc + iommus: + maxItems: 2 + iommus-names: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/clock/exynos-audss-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + codec@13400000 { + compatible = "samsung,mfc-v5"; + reg = <0x13400000 0x10000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_mfc>; + clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; + clock-names = "mfc", "sclk_mfc"; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; + }; diff --git a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml new file mode 100644 index 000000000000..e28d6ec56c0b --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/samsung,s5pv210-jpeg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5PV210 and Exynos SoC JPEG codec + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> + +properties: + compatible: + enum: + - samsung,s5pv210-jpeg + - samsung,exynos3250-jpeg + - samsung,exynos4210-jpeg + - samsung,exynos4212-jpeg + - samsung,exynos5420-jpeg + - samsung,exynos5433-jpeg + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + interrupts: + maxItems: 1 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,s5pv210-jpeg + - samsung,exynos4210-jpeg + - samsung,exynos4212-jpeg + - samsung,exynos5420-jpeg + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: jpeg + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-jpeg + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: jpeg + - const: sclk + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5433-jpeg + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: pclk + - const: aclk + - const: aclk_xiu + - const: sclk + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + codec@15020000 { + compatible = "samsung,exynos5433-jpeg"; + reg = <0x15020000 0x10000>; + interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk", "aclk_xiu", "sclk"; + clocks = <&cmu_mscl CLK_PCLK_JPEG>, + <&cmu_mscl CLK_ACLK_JPEG>, + <&cmu_mscl CLK_ACLK_XIU_MSCLX>, + <&cmu_mscl CLK_SCLK_JPEG>; + iommus = <&sysmmu_jpeg>; + power-domains = <&pd_mscl>; + }; diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt deleted file mode 100644 index f91b9dc80eb3..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ /dev/null @@ -1,209 +0,0 @@ -Samsung S5P/Exynos SoC Camera Subsystem (FIMC) ----------------------------------------------- - -The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices -represented by separate device tree nodes. Currently this includes: FIMC (in -the S5P SoCs series known as CAMIF), MIPI CSIS, FIMC-LITE and FIMC-IS (ISP). - -The sub-subdevices are defined as child nodes of the common 'camera' node which -also includes common properties of the whole subsystem not really specific to -any single sub-device, like common camera port pins or the CAMCLK clock outputs -for external image sensors attached to an SoC. - -Common 'camera' node --------------------- - -Required properties: - -- compatible: must be "samsung,fimc", "simple-bus" -- clocks: list of clock specifiers, corresponding to entries in - the clock-names property; -- clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0", - "pxl_async1" entries, matching entries in the clocks property. - -- #clock-cells: from the common clock bindings (../clock/clock-bindings.txt), - must be 1. A clock provider is associated with the 'camera' node and it should - be referenced by external sensors that use clocks provided by the SoC on - CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock. - The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively. - -- clock-output-names: from the common clock bindings, should contain names of - clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT, - CAM_B_CLKOUT output clocks respectively. - -The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used -to define a required pinctrl state named "default" and optional pinctrl states: -"idle", "active-a", active-b". These optional states can be used to switch the -camera port pinmux at runtime. The "idle" state should configure both the camera -ports A and B into high impedance state, especially the CAMCLK clock output -should be inactive. For the "active-a" state the camera port A must be activated -and the port B deactivated and for the state "active-b" it should be the other -way around. - -The 'camera' node must include at least one 'fimc' child node. - - -'fimc' device nodes -------------------- - -Required properties: - -- compatible: "samsung,s5pv210-fimc" for S5PV210, "samsung,exynos4210-fimc" - for Exynos4210 and "samsung,exynos4212-fimc" for Exynos4x12 SoCs; -- reg: physical base address and length of the registers set for the device; -- interrupts: should contain FIMC interrupt; -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names; -- clock-names: must contain "fimc", "sclk_fimc" entries. -- samsung,pix-limits: an array of maximum supported image sizes in pixels, for - details refer to Table 2-1 in the S5PV210 SoC User Manual; The meaning of - each cell is as follows: - 0 - scaler input horizontal size, - 1 - input horizontal size for the scaler bypassed, - 2 - REAL_WIDTH without input rotation, - 3 - REAL_HEIGHT with input rotation, -- samsung,sysreg: a phandle to the SYSREG node. - -Each FIMC device should have an alias in the aliases node, in the form of -fimc<n>, where <n> is an integer specifying the IP block instance. - -Optional properties: - -- clock-frequency: maximum FIMC local clock (LCLK) frequency; -- samsung,min-pix-sizes: an array specyfing minimum image size in pixels at - the FIMC input and output DMA, in the first and second cell respectively. - Default value when this property is not present is <16 16>; -- samsung,min-pix-alignment: minimum supported image height alignment (first - cell) and the horizontal image offset (second cell). The values are in pixels - and default to <2 1> when this property is not present; -- samsung,mainscaler-ext: a boolean property indicating whether the FIMC IP - supports extended image size and has CIEXTEN register; -- samsung,rotators: a bitmask specifying whether this IP has the input and - the output rotator. Bits 4 and 0 correspond to input and output rotator - respectively. If a rotator is present its corresponding bit should be set. - Default value when this property is not specified is 0x11. -- samsung,cam-if: a bolean property indicating whether the IP block includes - the camera input interface. -- samsung,isp-wb: this property must be present if the IP block has the ISP - writeback input. -- samsung,lcd-wb: this property must be present if the IP block has the LCD - writeback input. - - -'parallel-ports' node ---------------------- - -This node should contain child 'port' nodes specifying active parallel video -input ports. It includes camera A and camera B inputs. 'reg' property in the -port nodes specifies data input - 0, 1 indicates input A, B respectively. - -Optional properties - -- samsung,camclk-out (deprecated) : specifies clock output for remote sensor, - 0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT; - -Image sensor nodes ------------------- - -The sensor device nodes should be added to their control bus controller (e.g. -I2C0) nodes and linked to a port node in the csis or the parallel-ports node, -using the common video interfaces bindings, defined in video-interfaces.txt. - -Example: - - aliases { - fimc0 = &fimc_0; - }; - - /* Parallel bus IF sensor */ - i2c_0: i2c@13860000 { - s5k6aa: sensor@3c { - compatible = "samsung,s5k6aafx"; - reg = <0x3c>; - vddio-supply = <...>; - - clock-frequency = <24000000>; - clocks = <&camera 1>; - clock-names = "mclk"; - - port { - s5k6aa_ep: endpoint { - remote-endpoint = <&fimc0_ep>; - bus-width = <8>; - hsync-active = <0>; - vsync-active = <1>; - pclk-sample = <1>; - }; - }; - }; - - /* MIPI CSI-2 bus IF sensor */ - s5c73m3: sensor@1a { - compatible = "samsung,s5c73m3"; - reg = <0x1a>; - vddio-supply = <...>; - - clock-frequency = <24000000>; - clocks = <&camera 0>; - clock-names = "mclk"; - - port { - s5c73m3_1: endpoint { - data-lanes = <1 2 3 4>; - remote-endpoint = <&csis0_ep>; - }; - }; - }; - }; - - camera { - compatible = "samsung,fimc", "simple-bus"; - clocks = <&clock 132>, <&clock 133>, <&clock 351>, - <&clock 352>; - clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", - "pxl_async1"; - #clock-cells = <1>; - clock-output-names = "cam_a_clkout", "cam_b_clkout"; - pinctrl-names = "default"; - pinctrl-0 = <&cam_port_a_clk_active>; - #address-cells = <1>; - #size-cells = <1>; - - /* parallel camera ports */ - parallel-ports { - /* camera A input */ - port@0 { - reg = <0>; - fimc0_ep: endpoint { - remote-endpoint = <&s5k6aa_ep>; - bus-width = <8>; - hsync-active = <0>; - vsync-active = <1>; - pclk-sample = <1>; - }; - }; - }; - - fimc_0: fimc@11800000 { - compatible = "samsung,exynos4210-fimc"; - reg = <0x11800000 0x1000>; - interrupts = <0 85 0>; - }; - - csis_0: csis@11880000 { - compatible = "samsung,exynos4210-csis"; - reg = <0x11880000 0x1000>; - interrupts = <0 78 0>; - /* camera C input */ - port@3 { - reg = <3>; - csis0_ep: endpoint { - remote-endpoint = <&s5c73m3_ep>; - data-lanes = <1 2 3 4>; - samsung,csis-hs-settle = <12>; - }; - }; - }; - }; - -The MIPI-CSIS device binding is defined in samsung-mipi-csis.txt. diff --git a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt deleted file mode 100644 index a4149c9434ea..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt +++ /dev/null @@ -1,81 +0,0 @@ -Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS) -------------------------------------------------------------- - -Required properties: - -- compatible : "samsung,s5pv210-csis" for S5PV210 (S5PC110), - "samsung,exynos4210-csis" for Exynos4210 (S5PC210), - "samsung,exynos4212-csis" for Exynos4212/Exynos4412, - "samsung,exynos5250-csis" for Exynos5250; -- reg : offset and length of the register set for the device; -- interrupts : should contain MIPI CSIS interrupt; the format of the - interrupt specifier depends on the interrupt controller; -- bus-width : maximum number of data lanes supported (SoC specific); -- vddio-supply : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V); -- vddcore-supply : MIPI CSIS Core voltage supply (e.g. 1.1V); -- clocks : list of clock specifiers, corresponding to entries in - clock-names property; -- clock-names : must contain "csis", "sclk_csis" entries, matching entries - in the clocks property. - -Optional properties: - -- clock-frequency : The IP's main (system bus) clock frequency in Hz, default - value when this property is not specified is 166 MHz; -- samsung,csis-wclk : CSI-2 wrapper clock selection. If this property is present - external clock from CMU will be used, or the bus clock if - if it's not specified. - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -media/video-interfaces.txt. The following are properties specific to those nodes. - -port node ---------- - -- reg : (required) must be 3 for camera C input (CSIS0) or 4 for - camera D input (CSIS1); - -endpoint node -------------- - -- data-lanes : (required) an array specifying active physical MIPI-CSI2 - data input lanes and their mapping to logical lanes; the - array's content is unused, only its length is meaningful; - -- samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time; - - -Example: - - reg0: regulator@0 { - }; - - reg1: regulator@1 { - }; - -/* SoC properties */ - - csis_0: csis@11880000 { - compatible = "samsung,exynos4210-csis"; - reg = <0x11880000 0x1000>; - interrupts = <0 78 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - -/* Board properties */ - - csis_0: csis@11880000 { - clock-frequency = <166000000>; - vddio-supply = <®0>; - vddcore-supply = <®1>; - port { - reg = <3>; /* 3 - CSIS0, 4 - CSIS1 */ - csis0_ep: endpoint { - remote-endpoint = <...>; - data-lanes = <1>, <2>; - samsung,csis-hs-settle = <12>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt deleted file mode 100644 index 21f31fdf5543..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt +++ /dev/null @@ -1,97 +0,0 @@ -Samsung S5C73M3 8Mp camera ISP ------------------------------- - -The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) video -data busses. The I2C bus is the main control bus and additionally the SPI bus -is used, mostly for transferring the firmware to and from the device. Two -slave device nodes corresponding to these control bus interfaces are required -and should be placed under respective bus controller nodes. - -I2C slave device node ---------------------- - -Required properties: - -- compatible : "samsung,s5c73m3"; -- reg : I2C slave address of the sensor; -- vdd-int-supply : digital power supply (1.2V); -- vdda-supply : analog power supply (1.2V); -- vdd-reg-supply : regulator input power supply (2.8V); -- vddio-host-supply : host I/O power supply (1.8V to 2.8V); -- vddio-cis-supply : CIS I/O power supply (1.2V to 1.8V); -- vdd-af-supply : lens power supply (2.8V); -- xshutdown-gpios : specifier of GPIO connected to the XSHUTDOWN pin; -- standby-gpios : specifier of GPIO connected to the STANDBY pin; -- clocks : should contain list of phandle and clock specifier pairs - according to common clock bindings for the clocks described - in the clock-names property; -- clock-names : should contain "cis_extclk" entry for the CIS_EXTCLK clock; - -Optional properties: - -- clock-frequency : the frequency at which the "cis_extclk" clock should be - configured to operate, in Hz; if this property is not - specified default 24 MHz value will be used. - -The common video interfaces bindings (see video-interfaces.txt) should be used -to specify link from the S5C73M3 to an external image data receiver. The S5C73M3 -device node should contain one 'port' child node with an 'endpoint' subnode for -this purpose. The data link from a raw image sensor to the S5C73M3 can be -similarly specified, but it is optional since the S5C73M3 ISP and a raw image -sensor are usually inseparable and form a hybrid module. - -Following properties are valid for the endpoint node(s): - -endpoint subnode ----------------- - -- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in - video-interfaces.txt. This sensor doesn't support data lane remapping - and physical lane indexes in subsequent elements of the array should - be only consecutive ascending values. - -SPI device node ---------------- - -Required properties: - -- compatible : "samsung,s5c73m3"; - -For more details see description of the SPI busses bindings -(../spi/spi-bus.txt) and bindings of a specific bus controller. - -Example: - -i2c@138a000000 { - ... - s5c73m3@3c { - compatible = "samsung,s5c73m3"; - reg = <0x3c>; - vdd-int-supply = <&buck9_reg>; - vdda-supply = <&ldo17_reg>; - vdd-reg-supply = <&cam_io_reg>; - vddio-host-supply = <&ldo18_reg>; - vddio-cis-supply = <&ldo9_reg>; - vdd-af-supply = <&cam_af_reg>; - clock-frequency = <24000000>; - clocks = <&clk 0>; - clock-names = "cis_extclk"; - reset-gpios = <&gpf1 3 1>; - standby-gpios = <&gpm0 1 1>; - port { - s5c73m3_ep: endpoint { - remote-endpoint = <&csis0_ep>; - data-lanes = <1 2 3 4>; - }; - }; - }; -}; - -spi@1392000 { - ... - s5c73m3_spi: s5c73m3@0 { - compatible = "samsung,s5c73m3"; - reg = <0>; - ... - }; -}; diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt deleted file mode 100644 index 1f51e0439c96..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt +++ /dev/null @@ -1,58 +0,0 @@ -Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP --------------------------------------------------------------------- - -Required properties: - -- compatible : "samsung,s5k5baf"; -- reg : I2C slave address of the sensor; -- vdda-supply : analog power supply 2.8V (2.6V to 3.0V); -- vddreg-supply : regulator input power supply 1.8V (1.7V to 1.9V) - or 2.8V (2.6V to 3.0); -- vddio-supply : I/O power supply 1.8V (1.65V to 1.95V) - or 2.8V (2.5V to 3.1V); -- stbyn-gpios : GPIO connected to STDBYN pin; -- rstn-gpios : GPIO connected to RSTN pin; -- clocks : list of phandle and clock specifier pairs - according to common clock bindings for the - clocks described in clock-names; -- clock-names : should include "mclk" for the sensor's master clock; - -Optional properties: - -- clock-frequency : the frequency at which the "mclk" clock should be - configured to operate, in Hz; if this property is not - specified default 24 MHz value will be used. - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -media/video-interfaces.txt. The following are properties specific to those -nodes. - -endpoint node -------------- - -- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in - video-interfaces.txt. If present it should be <1> - the device - supports only one data lane without re-mapping. - -Example: - -s5k5bafx@2d { - compatible = "samsung,s5k5baf"; - reg = <0x2d>; - vdda-supply = <&cam_io_en_reg>; - vddreg-supply = <&vt_core_15v_reg>; - vddio-supply = <&vtcam_reg>; - stbyn-gpios = <&gpl2 0 1>; - rstn-gpios = <&gpl2 1 1>; - clock-names = "mclk"; - clocks = <&clock_cam 0>; - clock-frequency = <24000000>; - - port { - s5k5bafx_ep: endpoint { - remote-endpoint = <&csis1_ep>; - data-lanes = <1>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt deleted file mode 100644 index cce01e82f3e3..000000000000 --- a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt +++ /dev/null @@ -1,33 +0,0 @@ -Samsung S5K6A3(YX) raw image sensor ---------------------------------- - -S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces -and CCI (I2C compatible) control bus. - -Required properties: - -- compatible : "samsung,s5k6a3"; -- reg : I2C slave address of the sensor; -- svdda-supply : core voltage supply; -- svddio-supply : I/O voltage supply; -- afvdd-supply : AF (actuator) voltage supply; -- gpios : specifier of a GPIO connected to the RESET pin; -- clocks : should contain list of phandle and clock specifier pairs - according to common clock bindings for the clocks described - in the clock-names property; -- clock-names : should contain "extclk" entry for the sensor's EXTCLK clock; - -Optional properties: - -- clock-frequency : the frequency at which the "extclk" clock should be - configured to operate, in Hz; if this property is not - specified default 24 MHz value will be used. - -The common video interfaces bindings (see video-interfaces.txt) should be -used to specify link to the image data receiver. The S5K6A3(YX) device -node should contain one 'port' child node with an 'endpoint' subnode. - -Following properties are valid for the endpoint node: - -- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in - video-interfaces.txt. The sensor supports only one data lane. diff --git a/Documentation/devicetree/bindings/media/si470x.txt b/Documentation/devicetree/bindings/media/si470x.txt deleted file mode 100644 index a9403558362e..000000000000 --- a/Documentation/devicetree/bindings/media/si470x.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Silicon Labs FM Radio receiver - -The Silicon Labs Si470x is family of FM radio receivers with receive power scan -supporting 76-108 MHz, programmable through an I2C interface. -Some of them includes an RDS encoder. - -Required Properties: -- compatible: Should contain "silabs,si470x" -- reg: the I2C address of the device - -Optional Properties: -- interrupts : The interrupt number -- reset-gpios: GPIO specifier for the chips reset line - -Example: - -&i2c2 { - si470x@63 { - compatible = "silabs,si470x"; - reg = <0x63>; - - interrupt-parent = <&gpj2>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>; - }; -}; diff --git a/Documentation/devicetree/bindings/media/silabs,si470x.yaml b/Documentation/devicetree/bindings/media/silabs,si470x.yaml new file mode 100644 index 000000000000..a3d19c562ca3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/silabs,si470x.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/silabs,si470x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Labs Si470x FM Radio Receiver + +maintainers: + - Hans Verkuil <hverkuil@xs4all.nl> + - PaweÅ‚ Chmiel <pawel.mikolaj.chmiel@gmail.com> + +properties: + compatible: + const: silabs,si470x + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fmradio@10 { + compatible = "silabs,si470x"; + reg = <0x10>; + interrupt-parent = <&gpj2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml index 3fe778cb5cc3..6b3e413cedb2 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/media/st,stm32-dcmi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI) binding +title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI) maintainers: - - Hugues Fruchet <hugues.fruchet@st.com> + - Hugues Fruchet <hugues.fruchet@foss.st.com> properties: compatible: @@ -37,12 +37,41 @@ properties: maxItems: 1 port: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: - DCMI supports a single port node with parallel bus. It should contain - one 'port' child node with child 'endpoint' node. Please refer to the - bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + DCMI supports a single port node with parallel bus. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: [5, 6] + default: 5 + + bus-width: + enum: [8, 10, 12, 14] + default: 8 + + allOf: + - if: + properties: + bus-type: + const: 6 + + then: + properties: + hsync-active: false + vsync-active: false + bus-width: + enum: [8] + + required: + - bus-type + - pclk-sample required: - compatible @@ -61,7 +90,9 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/media/video-interfaces.h> #include <dt-bindings/reset/stm32mp1-resets.h> + dcmi: dcmi@4c006000 { compatible = "st,stm32-dcmi"; reg = <0x4c006000 0x400>; @@ -75,6 +106,7 @@ examples: port { dcmi_0: endpoint { remote-endpoint = <&ov5640_0>; + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; bus-width = <8>; hsync-active = <0>; vsync-active = <0>; diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml new file mode 100644 index 000000000000..87731f3ce7bd --- /dev/null +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/st,stm32-dcmipp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 DCMIPP Digital Camera Memory Interface Pixel Processor + +maintainers: + - Hugues Fruchet <hugues.fruchet@foss.st.com> + - Alain Volmat <alain.volmat@foss.st.com> + +properties: + compatible: + const: st,stm32mp13-dcmipp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + DCMIPP supports a single port node with parallel bus. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: [5, 6] + default: 5 + + bus-width: + enum: [8, 10, 12, 14] + default: 8 + + pclk-sample: true + hsync-active: true + vsync-active: true + + required: + - pclk-sample + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp13-clks.h> + #include <dt-bindings/reset/stm32mp13-resets.h> + dcmipp@5a000000 { + compatible = "st,stm32mp13-dcmipp"; + reg = <0x5a000000 0x400>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc DCMIPP_R>; + clocks = <&rcc DCMIPP_K>; + + port { + endpoint { + remote-endpoint = <&mipid02_2>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <0>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml new file mode 100644 index 000000000000..4afa4a24b868 --- /dev/null +++ b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/st,stm32-dma2d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Chrom-Art Accelerator DMA2D + +description: + Chrom-ART Accelerator(DMA2D), graphical hardware accelerator + enabling enhanced graphical user interface with minimum CPU load + + It can perform the following operations. + + - Filling a part or the whole of a destination image with a specific color. + - Copying a part or the whole of a source image into a part or the whole of + a destination image. + - Copying a part or the whole of a source image into a part or the whole of + a destination image with a pixel format conversion. + - Blending a part and/or two complete source images with different pixel + format and copy the result into a part or the whole of a destination image + with a different color format. (TODO) + + +maintainers: + - Dillon Min <dillon.minfei@gmail.com> + +properties: + compatible: + const: st,stm32-dma2d + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: dma2d + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/stm32fx-clock.h> + #include <dt-bindings/mfd/stm32f4-rcc.h> + dma2d: dma2d@4002b000 { + compatible = "st,stm32-dma2d"; + reg = <0x4002b000 0xc00>; + interrupts = <90>; + resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>; + clock-names = "dma2d"; + }; + +... diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml new file mode 100644 index 000000000000..c66586d90fa2 --- /dev/null +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Starfive SoC CAMSS ISP + +maintainers: + - Jack Zhu <jack.zhu@starfivetech.com> + - Changhuang Liang <changhuang.liang@starfivetech.com> + +description: + The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC. It + consists of a VIN controller (Video In Controller, a top-level control unit) + and an ISP. + +properties: + compatible: + const: starfive,jh7110-camss + + reg: + maxItems: 2 + + reg-names: + items: + - const: syscon + - const: isp + + clocks: + maxItems: 7 + + clock-names: + items: + - const: apb_func + - const: wrapper_clk_c + - const: dvp_inv + - const: axiwr + - const: mipi_rx0_pxl + - const: ispcore_2x + - const: isp_axi + + resets: + maxItems: 6 + + reset-names: + items: + - const: wrapper_p + - const: wrapper_c + - const: axird + - const: axiwr + - const: isp_top_n + - const: isp_top_axi + + power-domains: + items: + - description: JH7110 ISP Power Domain Switch Controller. + + interrupts: + maxItems: 4 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Input port for receiving DVP data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: [5, 6] + + bus-width: + enum: [8, 10, 12] + + data-shift: + enum: [0, 2] + default: 0 + + hsync-active: + enum: [0, 1] + default: 1 + + vsync-active: + enum: [0, 1] + default: 1 + + required: + - bus-type + - bus-width + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Input port for receiving CSI data. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - interrupts + - ports + +additionalProperties: false + +examples: + - | + isp@19840000 { + compatible = "starfive,jh7110-camss"; + reg = <0x19840000 0x10000>, + <0x19870000 0x30000>; + reg-names = "syscon", "isp"; + clocks = <&ispcrg 0>, + <&ispcrg 13>, + <&ispcrg 2>, + <&ispcrg 12>, + <&ispcrg 1>, + <&syscrg 51>, + <&syscrg 52>; + clock-names = "apb_func", + "wrapper_clk_c", + "dvp_inv", + "axiwr", + "mipi_rx0_pxl", + "ispcore_2x", + "isp_axi"; + resets = <&ispcrg 0>, + <&ispcrg 1>, + <&ispcrg 10>, + <&ispcrg 11>, + <&syscrg 41>, + <&syscrg 42>; + reset-names = "wrapper_p", + "wrapper_c", + "axird", + "axiwr", + "isp_top_n", + "isp_top_axi"; + power-domains = <&pwrc 5>; + interrupts = <92>, <87>, <88>, <90>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vin_from_sc2235: endpoint { + remote-endpoint = <&sc2235_to_vin>; + bus-type = <5>; + bus-width = <8>; + data-shift = <2>; + hsync-active = <1>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + vin_from_csi2rx: endpoint { + remote-endpoint = <&csi2rx_to_vin>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt deleted file mode 100644 index ece0832fdeaf..000000000000 --- a/Documentation/devicetree/bindings/media/stih-cec.txt +++ /dev/null @@ -1,27 +0,0 @@ -STMicroelectronics STIH4xx HDMI CEC driver - -Required properties: - - compatible : value should be "st,stih-cec" - - reg : Physical base address of the IP registers and length of memory - mapped region. - - clocks : from common clock binding: handle to HDMI CEC clock - - interrupts : HDMI CEC interrupt number to the CPU. - - pinctrl-names: Contains only one value - "default" - - pinctrl-0: Specifies the pin control groups used for CEC hardware. - - resets: Reference to a reset controller - - hdmi-phandle: Phandle to the HDMI controller, see also cec.txt. - -Example for STIH407: - -sti-cec@94a087c { - compatible = "st,stih-cec"; - reg = <0x94a087c 0x64>; - clocks = <&clk_sysin>; - clock-names = "cec-clk"; - interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>; - interrupt-names = "cec-irq"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cec0_default>; - resets = <&softreset STIH407_LPM_SOFTRESET>; - hdmi-phandle = <&hdmi>; -}; diff --git a/Documentation/devicetree/bindings/media/tango-ir.txt b/Documentation/devicetree/bindings/media/tango-ir.txt deleted file mode 100644 index a9f00c2bf897..000000000000 --- a/Documentation/devicetree/bindings/media/tango-ir.txt +++ /dev/null @@ -1,21 +0,0 @@ -Sigma Designs Tango IR NEC/RC-5/RC-6 decoder (SMP86xx and SMP87xx) - -Required properties: - -- compatible: "sigma,smp8642-ir" -- reg: address/size of NEC+RC5 area, address/size of RC6 area -- interrupts: spec for IR IRQ -- clocks: spec for IR clock (typically the crystal oscillator) - -Optional properties: - -- linux,rc-map-name: see Documentation/devicetree/bindings/media/rc.txt - -Example: - - ir@10518 { - compatible = "sigma,smp8642-ir"; - reg = <0x10518 0x18>, <0x105e0 0x1c>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - }; diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt deleted file mode 100644 index c503f06f3b84..000000000000 --- a/Documentation/devicetree/bindings/media/tegra-cec.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Tegra HDMI CEC hardware - -The HDMI CEC module is present in Tegra SoCs and its purpose is to -handle communication between HDMI connected devices over the CEC bus. - -Required properties: - - compatible : value should be one of the following: - "nvidia,tegra114-cec" - "nvidia,tegra124-cec" - "nvidia,tegra210-cec" - - reg : Physical base address of the IP registers and length of memory - mapped region. - - interrupts : HDMI CEC interrupt number to the CPU. - - clocks : from common clock binding: handle to HDMI CEC clock. - - clock-names : from common clock binding: must contain "cec", - corresponding to the entry in the clocks property. - - hdmi-phandle : phandle to the HDMI controller, see also cec.txt. - -Example: - -cec@70015000 { - compatible = "nvidia,tegra124-cec"; - reg = <0x0 0x70015000 0x0 0x00001000>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_CEC>; - clock-names = "cec"; -}; diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml index 5e066629287d..f1a940a110d2 100644 --- a/Documentation/devicetree/bindings/media/ti,cal.yaml +++ b/Documentation/devicetree/bindings/media/ti,cal.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/media/ti,cal.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) Device Tree Bindings +title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) maintainers: - Benoit Parrot <bparrot@ti.com> @@ -15,10 +15,7 @@ description: |- processing capability to connect CSI2 image-sensor modules to the DRA72x device. - CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes - should contain a 'port' child node with child 'endpoint' node. Please - refer to the bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + CAL supports 2 camera port nodes on MIPI bus. properties: compatible: @@ -50,7 +47,11 @@ properties: maxItems: 1 ti,camerrx-control: - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to device control module + - description: offset to the control_camerarx_core register description: phandle to the device control module and offset to the control_camerarx_core register @@ -67,31 +68,19 @@ properties: Documentation/devicetree/bindings/power/power_domain.txt maxItems: 1 - # See ./video-interfaces.txt for details ports: - type: object - additionalProperties: false + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: 'CSI2 Port #0' properties: - reg: - const: 0 - description: CSI2 Port #0 - - patternProperties: endpoint: - type: object - additionalProperties: false + $ref: video-interfaces.yaml# + unevaluatedProperties: false properties: clock-lanes: @@ -101,24 +90,15 @@ properties: minItems: 1 maxItems: 4 - remote-endpoint: true - - required: - - reg - port@1: - type: object - additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: 'CSI2 Port #1' properties: - reg: - const: 1 - description: CSI2 Port #1 - - patternProperties: endpoint: - type: object - additionalProperties: false + $ref: video-interfaces.yaml# + unevaluatedProperties: false properties: clock-lanes: @@ -128,14 +108,7 @@ properties: minItems: 1 maxItems: 4 - remote-endpoint: true - - required: - - reg - required: - - "#address-cells" - - "#size-cells" - port@0 required: @@ -185,7 +158,9 @@ examples: camera-sensor@3c { compatible = "ovti,ov5640"; reg = <0x3c>; - + AVDD-supply = <®_2p8v>; + DOVDD-supply = <®_1p8v>; + DVDD-supply = <®_1p5v>; clocks = <&clk_ov5640_fixed>; clock-names = "xclk"; diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml new file mode 100644 index 000000000000..f762fdc05e4d --- /dev/null +++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx-shim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI J721E CSI2RX Shim + +description: | + The TI J721E CSI2RX Shim is a wrapper around Cadence CSI2RX bridge that + enables sending captured frames to memory over PSI-L DMA. In the J721E + Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the + CSI_RX_IF section. + +maintainers: + - Jai Luthra <j-luthra@ti.com> + +properties: + compatible: + const: ti,j721e-csi2rx-shim + + dmas: + maxItems: 1 + + dma-names: + items: + - const: rx0 + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + ranges: true + + "#address-cells": true + + "#size-cells": true + +patternProperties: + "^csi-bridge@": + type: object + description: CSI2 bridge node. + $ref: cdns,csi2rx.yaml# + +required: + - compatible + - reg + - dmas + - dma-names + - power-domains + - ranges + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + ti_csi2rx0: ticsi2rx@4500000 { + compatible = "ti,j721e-csi2rx-shim"; + dmas = <&main_udmap 0x4940>; + dma-names = "rx0"; + reg = <0x4500000 0x1000>; + power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cdns_csi2rx: csi-bridge@4504000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x4504000 0x1000>; + clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>, + <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + + reg = <0>; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/ti,vpe.yaml b/Documentation/devicetree/bindings/media/ti,vpe.yaml index f3a8a350e85f..7fa8a367ed22 100644 --- a/Documentation/devicetree/bindings/media/ti,vpe.yaml +++ b/Documentation/devicetree/bindings/media/ti,vpe.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/media/ti,vpe.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Texas Instruments DRA7x Video Processing Engine (VPE) Device Tree Bindings +title: Texas Instruments DRA7x Video Processing Engine (VPE) maintainers: - Benoit Parrot <bparrot@ti.com> @@ -17,7 +17,7 @@ description: |- properties: compatible: - const: ti,dra7-vpe + const: ti,dra7-vpe reg: items: diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml new file mode 100644 index 000000000000..cf7712ad297c --- /dev/null +++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml @@ -0,0 +1,406 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/video-interface-devices.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Video Receiver and Transmitter Devices + +maintainers: + - Jacopo Mondi <jacopo@jmondi.org> + - Sakari Ailus <sakari.ailus@linux.intel.com> + +properties: + flash-leds: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + An array of phandles, each referring to a flash LED, a sub-node of the LED + driver device node. + + lens-focus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A phandle to the node of the focus lens controller. + + rotation: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 90, 180, 270 ] + description: | + The camera rotation is expressed as the angular difference in degrees + between two reference systems, one relative to the camera module, and one + defined on the external world scene to be captured when projected on the + image sensor pixel array. + + A camera sensor has a 2-dimensional reference system 'Rc' defined by its + pixel array read-out order. The origin is set to the first pixel being + read out, the X-axis points along the column read-out direction towards + the last columns, and the Y-axis along the row read-out direction towards + the last row. + + A typical example for a sensor with a 2592x1944 pixel array matrix + observed from the front is: + + 2591 X-axis 0 + <------------------------+ 0 + .......... ... ..........! + .......... ... ..........! Y-axis + ... ! + .......... ... ..........! + .......... ... ..........! 1943 + V + + The external world scene reference system 'Rs' is a 2-dimensional + reference system on the focal plane of the camera module. The origin is + placed on the top-left corner of the visible scene, the X-axis points + towards the right, and the Y-axis points towards the bottom of the scene. + The top, bottom, left and right directions are intentionally not defined + and depend on the environment in which the camera is used. + + A typical example of a (very common) picture of a shark swimming from left + to right, as seen from the camera, is: + + 0 X-axis + 0 +-------------------------------------> + ! + ! + ! + ! |\____)\___ + ! ) _____ __`< + ! |/ )/ + ! + ! + ! + V + Y-axis + + with the reference system 'Rs' placed on the camera focal plane: + + ¸.·˙! + ¸.·˙ ! + _ ¸.·˙ ! + +-/ \-+¸.·˙ ! + | (o) | ! Camera focal plane + +-----+˙·.¸ ! + ˙·.¸ ! + ˙·.¸ ! + ˙·.¸! + + When projected on the sensor's pixel array, the image and the associated + reference system 'Rs' are typically (but not always) inverted, due to the + camera module's lens optical inversion effect. + + Assuming the above represented scene of the swimming shark, the lens + inversion projects the scene and its reference system onto the sensor + pixel array, seen from the front of the camera sensor, as follows: + + Y-axis + ^ + ! + ! + ! + ! |\_____)\__ + ! ) ____ ___.< + ! |/ )/ + ! + ! + ! + 0 +-------------------------------------> + 0 X-axis + + Note the shark being upside-down. + + The resulting projected reference system is named 'Rp'. + + The camera rotation property is then defined as the angular difference in + the counter-clockwise direction between the camera reference system 'Rc' + and the projected scene reference system 'Rp'. It is expressed in degrees + as a number in the range [0, 360[. + + Examples + + 0 degrees camera rotation: + + + Y-Rp + ^ + Y-Rc ! + ^ ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! 0 +-------------------------------------> + ! 0 X-Rp + 0 +-------------------------------------> + 0 X-Rc + + + X-Rc 0 + <------------------------------------+ 0 + X-Rp 0 ! + <------------------------------------+ 0 ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! V + ! Y-Rc + V + Y-Rp + + 90 degrees camera rotation: + + 0 Y-Rc + 0 +--------------------> + ! Y-Rp + ! ^ + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! 0 +-------------------------------------> + ! 0 X-Rp + ! + ! + ! + ! + V + X-Rc + + 180 degrees camera rotation: + + 0 + <------------------------------------+ 0 + X-Rc ! + Y-Rp ! + ^ ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! V + ! Y-Rc + 0 +-------------------------------------> + 0 X-Rp + + 270 degrees camera rotation: + + 0 Y-Rc + 0 +--------------------> + ! 0 + ! <-----------------------------------+ 0 + ! X-Rp ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! ! + ! V + ! Y-Rp + ! + ! + ! + ! + V + X-Rc + + + Example one - Webcam + + A camera module installed on the user facing part of a laptop screen + casing used for video calls. The captured images are meant to be displayed + in landscape mode (width > height) on the laptop screen. + + The camera is typically mounted upside-down to compensate the lens optical + inversion effect: + + Y-Rp + Y-Rc ^ + ^ ! + ! ! + ! ! |\_____)\__ + ! ! ) ____ ___.< + ! ! |/ )/ + ! ! + ! ! + ! ! + ! 0 +-------------------------------------> + ! 0 X-Rp + 0 +-------------------------------------> + 0 X-Rc + + The two reference systems are aligned, the resulting camera rotation is + 0 degrees, no rotation correction needs to be applied to the resulting + image once captured to memory buffers to correctly display it to users: + + +--------------------------------------+ + ! ! + ! ! + ! ! + ! |\____)\___ ! + ! ) _____ __`< ! + ! |/ )/ ! + ! ! + ! ! + ! ! + +--------------------------------------+ + + If the camera sensor is not mounted upside-down to compensate for the lens + optical inversion, the two reference systems will not be aligned, with + 'Rp' being rotated 180 degrees relatively to 'Rc': + + + X-Rc 0 + <------------------------------------+ 0 + ! + Y-Rp ! + ^ ! + ! ! + ! |\_____)\__ ! + ! ) ____ ___.< ! + ! |/ )/ ! + ! ! + ! ! + ! V + ! Y-Rc + 0 +-------------------------------------> + 0 X-Rp + + The image once captured to memory will then be rotated by 180 degrees: + + +--------------------------------------+ + ! ! + ! ! + ! ! + ! __/(_____/| ! + ! >.___ ____ ( ! + ! \( \| ! + ! ! + ! ! + ! ! + +--------------------------------------+ + + A software rotation correction of 180 degrees should be applied to + correctly display the image: + + +--------------------------------------+ + ! ! + ! ! + ! ! + ! |\____)\___ ! + ! ) _____ __`< ! + ! |/ )/ ! + ! ! + ! ! + ! ! + +--------------------------------------+ + + Example two - Phone camera + + A camera installed on the back side of a mobile device facing away from + the user. The captured images are meant to be displayed in portrait mode + (height > width) to match the device screen orientation and the device + usage orientation used when taking the picture. + + The camera sensor is typically mounted with its pixel array longer side + aligned to the device longer side, upside-down mounted to compensate for + the lens optical inversion effect: + + 0 Y-Rc + 0 +--------------------> + ! Y-Rp + ! ^ + ! ! + ! ! + ! ! + ! ! |\_____)\__ + ! ! ) ____ ___.< + ! ! |/ )/ + ! ! + ! ! + ! ! + ! 0 +-------------------------------------> + ! 0 X-Rp + ! + ! + ! + ! + V + X-Rc + + The two reference systems are not aligned and the 'Rp' reference system is + rotated by 90 degrees in the counter-clockwise direction relatively to the + 'Rc' reference system. + + The image once captured to memory will be rotated: + + +-------------------------------------+ + | _ _ | + | \ / | + | | | | + | | | | + | | > | + | < | | + | | | | + | . | + | V | + +-------------------------------------+ + + A correction of 90 degrees in counter-clockwise direction has to be + applied to correctly display the image in portrait mode on the device + screen: + + +--------------------+ + | | + | | + | | + | | + | | + | | + | |\____)\___ | + | ) _____ __`< | + | |/ )/ | + | | + | | + | | + | | + | | + +--------------------+ + + orientation: + description: + The orientation of a device (typically an image sensor or a flash LED) + describing its mounting position relative to the usage orientation of the + system where the device is installed on. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + # Front. The device is mounted on the front facing side of the system. For + # mobile devices such as smartphones, tablets and laptops the front side + # is the user facing side. + - 0 + # Back. The device is mounted on the back side of the system, which is + # defined as the opposite side of the front facing one. + - 1 + # External. The device is not attached directly to the system but is + # attached in a way that allows it to move freely. + - 2 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index f884ada0bffc..8fcf5f52bf5b 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -1,275 +1 @@ -Common bindings for video receiver and transmitter interfaces - -General concept ---------------- - -Video data pipelines usually consist of external devices, e.g. camera sensors, -controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including -video DMA engines and video data processors. - -SoC internal blocks are described by DT nodes, placed similarly to other SoC -blocks. External devices are represented as child nodes of their respective -bus controller nodes, e.g. I2C. - -Data interfaces on all video devices are described by their child 'port' nodes. -Configuration of a port depends on other devices participating in the data -transfer and is described by 'endpoint' subnodes. - -device { - ... - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - ... - endpoint@0 { ... }; - endpoint@1 { ... }; - }; - port@1 { ... }; - }; -}; - -If a port can be configured to work with more than one remote device on the same -bus, an 'endpoint' child node must be provided for each of them. If more than -one port is present in a device node or there is more than one endpoint at a -port, or port node needs to be associated with a selected hardware interface, -a common scheme using '#address-cells', '#size-cells' and 'reg' properties is -used. - -All 'port' nodes can be grouped under optional 'ports' node, which allows to -specify #address-cells, #size-cells properties independently for the 'port' -and 'endpoint' nodes and any child device nodes a device might have. - -Two 'endpoint' nodes are linked with each other through their 'remote-endpoint' -phandles. An endpoint subnode of a device contains all properties needed for -configuration of this device for data exchange with other device. In most -cases properties at the peer 'endpoint' nodes will be identical, however they -might need to be different when there is any signal modifications on the bus -between two devices, e.g. there are logic signal inverters on the lines. - -It is allowed for multiple endpoints at a port to be active simultaneously, -where supported by a device. For example, in case where a data interface of -a device is partitioned into multiple data busses, e.g. 16-bit input port -divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width -and data-shift properties can be used to assign physical data lines to each -endpoint node (logical bus). - -Documenting bindings for devices --------------------------------- - -All required and optional bindings the device supports shall be explicitly -documented in device DT binding documentation. This also includes port and -endpoint nodes for the device, including unit-addresses and reg properties where -relevant. - -Please also see Documentation/devicetree/bindings/graph.txt . - -Required properties -------------------- - -If there is more than one 'port' or more than one 'endpoint' node or 'reg' -property is present in port and/or endpoint nodes the following properties -are required in a relevant parent node: - - - #address-cells : number of cells required to define port/endpoint - identifier, should be 1. - - #size-cells : should be zero. - - -Optional properties -------------------- - -- flash-leds: An array of phandles, each referring to a flash LED, a sub-node - of the LED driver device node. - -- lens-focus: A phandle to the node of the focus lens controller. - -- rotation: The device, typically an image sensor, is not mounted upright, - but a number of degrees counter clockwise. Typical values are 0 and 180 - (upside down). - - -Optional endpoint properties ----------------------------- - -- remote-endpoint: phandle to an 'endpoint' subnode of a remote device node. -- slave-mode: a boolean property indicating that the link is run in slave mode. - The default when this property is not specified is master mode. In the slave - mode horizontal and vertical synchronization signals are provided to the - slave device (data source) by the master device (data sink). In the master - mode the data source device is also the source of the synchronization signals. -- bus-type: data bus type. Possible values are: - 1 - MIPI CSI-2 C-PHY - 2 - MIPI CSI1 - 3 - CCP2 - 4 - MIPI CSI-2 D-PHY - 5 - Parallel - 6 - Bt.656 -- bus-width: number of data lines actively used, valid for the parallel busses. -- data-shift: on the parallel data busses, if bus-width is used to specify the - number of data lines, data-shift can be used to specify which data lines are - used, e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used. -- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. -- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. - Note, that if HSYNC and VSYNC polarities are not specified, embedded - synchronization may be required, where supported. -- data-active: similar to HSYNC and VSYNC, specifies data line polarity. -- data-enable-active: similar to HSYNC and VSYNC, specifies the data enable - signal polarity. -- field-even-active: field signal level during the even field data transmission. -- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock - signal. -- sync-on-green-active: active state of Sync-on-green (SoG) signal, 0/1 for - LOW/HIGH respectively. -- data-lanes: an array of physical data lane indexes. Position of an entry - determines the logical lane number, while the value of an entry indicates - physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have - "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0. - If the hardware does not support lane reordering, monotonically - incremented values shall be used from 0 or 1 onwards, depending on - whether or not there is also a clock lane. This property is valid for - serial busses only (e.g. MIPI CSI-2). -- clock-lanes: an array of physical clock lane indexes. Position of an entry - determines the logical lane number, while the value of an entry indicates - physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;", - which places the clock lane on hardware lane 0. This property is valid for - serial busses only (e.g. MIPI CSI-2). Note that for the MIPI CSI-2 bus this - array contains only one entry. -- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous - clock mode. -- link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for - instance, this is the actual frequency of the bus, not bits per clock per - lane value. An array of 64-bit unsigned integers. -- lane-polarities: an array of polarities of the lanes starting from the clock - lane and followed by the data lanes in the same order as in data-lanes. - Valid values are 0 (normal) and 1 (inverted). The length of the array - should be the combined length of data-lanes and clock-lanes properties. - If the lane-polarities property is omitted, the value must be interpreted - as 0 (normal). This property is valid for serial busses only. -- strobe: Whether the clock signal is used as clock (0) or strobe (1). Used - with CCP2, for instance. - -Example -------- - -The example snippet below describes two data pipelines. ov772x and imx074 are -camera sensors with a parallel and serial (MIPI CSI-2) video bus respectively. -Both sensors are on the I2C control bus corresponding to the i2c0 controller -node. ov772x sensor is linked directly to the ceu0 video host interface. -imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a -(single) DMA engine writing captured data to memory. ceu0 node has a single -'port' node which may indicate that at any time only one of the following data -pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. - - ceu0: ceu@fe910000 { - compatible = "renesas,sh-mobile-ceu"; - reg = <0xfe910000 0xa0>; - interrupts = <0x880>; - - mclk: master_clock { - compatible = "renesas,ceu-clock"; - #clock-cells = <1>; - clock-frequency = <50000000>; /* Max clock frequency */ - clock-output-names = "mclk"; - }; - - port { - #address-cells = <1>; - #size-cells = <0>; - - /* Parallel bus endpoint */ - ceu0_1: endpoint@1 { - reg = <1>; /* Local endpoint # */ - remote = <&ov772x_1_1>; /* Remote phandle */ - bus-width = <8>; /* Used data lines */ - data-shift = <2>; /* Lines 9:2 are used */ - - /* If hsync-active/vsync-active are missing, - embedded BT.656 sync is used */ - hsync-active = <0>; /* Active low */ - vsync-active = <0>; /* Active low */ - data-active = <1>; /* Active high */ - pclk-sample = <1>; /* Rising */ - }; - - /* MIPI CSI-2 bus endpoint */ - ceu0_0: endpoint@0 { - reg = <0>; - remote = <&csi2_2>; - }; - }; - }; - - i2c0: i2c@fff20000 { - ... - ov772x_1: camera@21 { - compatible = "ovti,ov772x"; - reg = <0x21>; - vddio-supply = <®ulator1>; - vddcore-supply = <®ulator2>; - - clock-frequency = <20000000>; - clocks = <&mclk 0>; - clock-names = "xclk"; - - port { - /* With 1 endpoint per port no need for addresses. */ - ov772x_1_1: endpoint { - bus-width = <8>; - remote-endpoint = <&ceu0_1>; - hsync-active = <1>; - vsync-active = <0>; /* Who came up with an - inverter here ?... */ - data-active = <1>; - pclk-sample = <1>; - }; - }; - }; - - imx074: camera@1a { - compatible = "sony,imx074"; - reg = <0x1a>; - vddio-supply = <®ulator1>; - vddcore-supply = <®ulator2>; - - clock-frequency = <30000000>; /* Shared clock with ov772x_1 */ - clocks = <&mclk 0>; - clock-names = "sysclk"; /* Assuming this is the - name in the datasheet */ - port { - imx074_1: endpoint { - clock-lanes = <0>; - data-lanes = <1 2>; - remote-endpoint = <&csi2_1>; - }; - }; - }; - }; - - csi2: csi2@ffc90000 { - compatible = "renesas,sh-mobile-csi2"; - reg = <0xffc90000 0x1000>; - interrupts = <0x17a0>; - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */ - reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S, - PHY_M has port address 0, - is unused. */ - csi2_1: endpoint { - clock-lanes = <0>; - data-lanes = <2 1>; - remote-endpoint = <&imx074_1>; - }; - }; - port@2 { - reg = <2>; /* port 2: link to the CEU */ - - csi2_2: endpoint { - remote-endpoint = <&ceu0_0>; - }; - }; - }; +This file has moved to video-interfaces.yaml and video-interface-devices.yaml. diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml new file mode 100644 index 000000000000..26e3e7d7c67b --- /dev/null +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml @@ -0,0 +1,220 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/video-interfaces.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Video Receiver and Transmitter Interface Endpoints + +maintainers: + - Sakari Ailus <sakari.ailus@linux.intel.com> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: | + Video data pipelines usually consist of external devices, e.g. camera sensors, + controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including + video DMA engines and video data processors. + + SoC internal blocks are described by DT nodes, placed similarly to other SoC + blocks. External devices are represented as child nodes of their respective + bus controller nodes, e.g. I2C. + + Data interfaces on all video devices are described by their child 'port' nodes. + Configuration of a port depends on other devices participating in the data + transfer and is described by 'endpoint' subnodes. + + device { + ... + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + ... + endpoint@0 { ... }; + endpoint@1 { ... }; + }; + port@1 { ... }; + }; + }; + + If a port can be configured to work with more than one remote device on the same + bus, an 'endpoint' child node must be provided for each of them. If more than + one port is present in a device node or there is more than one endpoint at a + port, or port node needs to be associated with a selected hardware interface, + a common scheme using '#address-cells', '#size-cells' and 'reg' properties is + used. + + All 'port' nodes can be grouped under optional 'ports' node, which allows to + specify #address-cells, #size-cells properties independently for the 'port' + and 'endpoint' nodes and any child device nodes a device might have. + + Two 'endpoint' nodes are linked with each other through their 'remote-endpoint' + phandles. An endpoint subnode of a device contains all properties needed for + configuration of this device for data exchange with other device. In most + cases properties at the peer 'endpoint' nodes will be identical, however they + might need to be different when there is any signal modifications on the bus + between two devices, e.g. there are logic signal inverters on the lines. + + It is allowed for multiple endpoints at a port to be active simultaneously, + where supported by a device. For example, in case where a data interface of + a device is partitioned into multiple data busses, e.g. 16-bit input port + divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width + and data-shift properties can be used to assign physical data lines to each + endpoint node (logical bus). + + Documenting bindings for devices + -------------------------------- + + All required and optional bindings the device supports shall be explicitly + documented in device DT binding documentation. This also includes port and + endpoint nodes for the device, including unit-addresses and reg properties + where relevant. + +allOf: + - $ref: /schemas/graph.yaml#/$defs/endpoint-base + +properties: + slave-mode: + type: boolean + description: + Indicates that the link is run in slave mode. The default when this + property is not specified is master mode. In the slave mode horizontal and + vertical synchronization signals are provided to the slave device (data + source) by the master device (data sink). In the master mode the data + source device is also the source of the synchronization signals. + + bus-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 1 # MIPI CSI-2 C-PHY + - 2 # MIPI CSI1 + - 3 # CCP2 + - 4 # MIPI CSI-2 D-PHY + - 5 # Parallel + - 6 # BT.656 + - 7 # DPI + description: + Data bus type. + + bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 64 + description: + Number of data lines actively used, valid for the parallel busses. + + data-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 64 + description: + On the parallel data busses, if bus-width is used to specify the number of + data lines, data-shift can be used to specify which data lines are used, + e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used. + + hsync-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. + + vsync-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. Note, + that if HSYNC and VSYNC polarities are not specified, embedded + synchronization may be required, where supported. + + data-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Similar to HSYNC and VSYNC, specifies data line polarity. + + data-enable-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Similar to HSYNC and VSYNC, specifies the data enable signal polarity. + + field-even-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Field signal level during the even field data transmission. + + pclk-sample: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + description: + Sample data on falling (0), rising (1) or both (2) edges of the pixel + clock signal. + + sync-on-green-active: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. + + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + # Assume up to 9 physical lane indices + maximum: 8 + description: + An array of physical data lane indexes. Position of an entry determines + the logical lane number, while the value of an entry indicates physical + lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;", + assuming the clock lane is on hardware lane 0. If the hardware does not + support lane reordering, monotonically incremented values shall be used + from 0 or 1 onwards, depending on whether or not there is also a clock + lane. This property is valid for serial busses only (e.g. MIPI CSI-2). + + clock-lanes: + $ref: /schemas/types.yaml#/definitions/uint32 + # Assume up to 9 physical lane indices + maximum: 8 + description: + Physical clock lane index. Position of an entry determines the logical + lane number, while the value of an entry indicates physical lane, e.g. for + a MIPI CSI-2 bus we could have "clock-lanes = <0>;", which places the + clock lane on hardware lane 0. This property is valid for serial busses + only (e.g. MIPI CSI-2). + + clock-noncontinuous: + type: boolean + description: + Allow MIPI CSI-2 non-continuous clock mode. + + link-frequencies: + $ref: /schemas/types.yaml#/definitions/uint64-array + description: + Allowed data bus frequencies. For MIPI CSI-2, for instance, this is the + actual frequency of the bus, not bits per clock per lane value. An array + of 64-bit unsigned integers. + + lane-polarities: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 9 + items: + enum: [ 0, 1 ] + description: + An array of polarities of the lanes starting from the clock lane and + followed by the data lanes in the same order as in data-lanes. Valid + values are 0 (normal) and 1 (inverted). The length of the array should be + the combined length of data-lanes and clock-lanes properties. If the + lane-polarities property is omitted, the value must be interpreted as 0 + (normal). This property is valid for serial busses only. + + strobe: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: + Whether the clock signal is used as clock (0) or strobe (1). Used with + CCP2, for instance. + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/media/video-mux.txt b/Documentation/devicetree/bindings/media/video-mux.txt deleted file mode 100644 index 63b9dc913e45..000000000000 --- a/Documentation/devicetree/bindings/media/video-mux.txt +++ /dev/null @@ -1,60 +0,0 @@ -Video Multiplexer -================= - -Video multiplexers allow to select between multiple input ports. Video received -on the active input port is passed through to the output port. Muxes described -by this binding are controlled by a multiplexer controller that is described by -the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt - -Required properties: -- compatible : should be "video-mux" -- mux-controls : mux controller node to use for operating the mux -- #address-cells: should be <1> -- #size-cells: should be <0> -- port@*: at least three port nodes containing endpoints connecting to the - source and sink devices according to of_graph bindings. The last port is - the output port, all others are inputs. - -Optionally, #address-cells, #size-cells, and port nodes can be grouped under a -ports node as described in Documentation/devicetree/bindings/graph.txt. - -Example: - - mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; - - mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - }; - - video-mux { - compatible = "video-mux"; - mux-controls = <&mux>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mux_in0: endpoint { - remote-endpoint = <&video_source0_out>; - }; - }; - - port@1 { - reg = <1>; - - mux_in1: endpoint { - remote-endpoint = <&video_source1_out>; - }; - }; - - port@2 { - reg = <2>; - - mux_out: endpoint { - remote-endpoint = <&capture_interface_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml new file mode 100644 index 000000000000..2f28a7dad93f --- /dev/null +++ b/Documentation/devicetree/bindings/media/video-mux.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/video-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Video Multiplexer + +maintainers: + - Sakari Ailus <sakari.ailus@linux.intel.com> + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: + Video multiplexers allow to select between multiple input ports. Video + received on the active input port is passed through to the output port. Muxes + described by this binding are controlled by a multiplexer controller. + +properties: + compatible: + const: video-mux + + mux-controls: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + '^port@': + $ref: /schemas/graph.yaml#/properties/port + + required: + - port@0 + - port@1 + - port@2 + +patternProperties: + '^port@': + $ref: /schemas/graph.yaml#/properties/port + description: + At least three port nodes containing endpoints connecting to the source + and sink devices according to of_graph bindings. The last port is the + output port, all others are inputs. + +required: + - compatible + - mux-controls + +oneOf: + - required: + - ports + - required: + - port@0 + - port@1 + - port@2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + video-mux { + compatible = "video-mux"; + mux-controls = <&mux>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mux_in0: endpoint { + remote-endpoint = <&video_source0_out>; + }; + }; + + port@1 { + reg = <1>; + + mux_in1: endpoint { + remote-endpoint = <&video_source1_out>; + }; + }; + + port@2 { + reg = <2>; + + mux_out: endpoint { + remote-endpoint = <&capture_interface_in>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/xilinx/video.txt b/Documentation/devicetree/bindings/media/xilinx/video.txt index 68ac210e688e..d0335ca0cd57 100644 --- a/Documentation/devicetree/bindings/media/xilinx/video.txt +++ b/Documentation/devicetree/bindings/media/xilinx/video.txt @@ -32,4 +32,4 @@ The following properties are common to all Xilinx video IP cores. defaults to "mono". -[UG934] http://www.xilinx.com/support/documentation/ip_documentation/axi_videoip/v1_0/ug934_axi_videoIP.pdf +[UG934] https://www.xilinx.com/support/documentation/ip_documentation/axi_videoip/v1_0/ug934_axi_videoIP.pdf diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml new file mode 100644 index 000000000000..43daf837fc9f --- /dev/null +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml @@ -0,0 +1,209 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/xilinx/xlnx,csi2rxss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx MIPI CSI-2 Receiver Subsystem + +maintainers: + - Vishal Sagar <vishal.sagar@amd.com> + +description: | + The Xilinx MIPI CSI-2 Receiver Subsystem is used to capture MIPI CSI-2 + traffic from compliant camera sensors and send the output as AXI4 Stream + video data for image processing. + The subsystem consists of a MIPI D-PHY in slave mode which captures the + data packets. This is passed along the MIPI CSI-2 Rx IP which extracts the + packet data. The optional Video Format Bridge (VFB) converts this data to + AXI4 Stream video data. + For more details, please refer to PG232 Xilinx MIPI CSI-2 Receiver Subsystem. + Please note that this bindings includes only the MIPI CSI-2 Rx controller + and Video Format Bridge and not D-PHY. + +properties: + compatible: + items: + - enum: + - xlnx,mipi-csi2-rx-subsystem-5.0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: List of clock specifiers + items: + - description: AXI Lite clock + - description: Video clock + + clock-names: + items: + - const: lite_aclk + - const: video_aclk + + xlnx,csi-pxl-format: + description: | + This denotes the CSI Data type selected in hw design. + Packets other than this data type (except for RAW8 and + User defined data types) will be filtered out. + Possible values are as below - + 0x1e - YUV4228B + 0x1f - YUV42210B + 0x20 - RGB444 + 0x21 - RGB555 + 0x22 - RGB565 + 0x23 - RGB666 + 0x24 - RGB888 + 0x28 - RAW6 + 0x29 - RAW7 + 0x2a - RAW8 + 0x2b - RAW10 + 0x2c - RAW12 + 0x2d - RAW14 + 0x2e - RAW16 + 0x2f - RAW20 + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - minimum: 0x1e + maximum: 0x24 + - minimum: 0x28 + maximum: 0x2f + + xlnx,vfb: + type: boolean + description: Present when Video Format Bridge is enabled in IP configuration + + xlnx,en-csi-v2-0: + type: boolean + description: Present if CSI v2 is enabled in IP configuration. + + xlnx,en-vcx: + type: boolean + description: | + When present, there are maximum 16 virtual channels, else only 4. + + xlnx,en-active-lanes: + type: boolean + description: | + Present if the number of active lanes can be re-configured at + runtime in the Protocol Configuration Register. Otherwise all lanes, + as set in IP configuration, are always active. + + video-reset-gpios: + description: Optional specifier for a GPIO that asserts video_aresetn. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Input / sink port node, single endpoint describing the + CSI-2 transmitter. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: | + This is required only in the sink port 0 endpoint which + connects to MIPI CSI-2 source like sensor. + The possible values are - + 1 - For 1 lane enabled in IP. + 1 2 - For 2 lanes enabled in IP. + 1 2 3 - For 3 lanes enabled in IP. + 1 2 3 4 - For 4 lanes enabled in IP. + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + + unevaluatedProperties: false + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + Output / source port node, endpoint describing modules + connected the CSI-2 receiver. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - ports + +allOf: + - if: + required: + - xlnx,vfb + then: + required: + - xlnx,csi-pxl-format + else: + properties: + xlnx,csi-pxl-format: false + + - if: + not: + required: + - xlnx,en-csi-v2-0 + then: + properties: + xlnx,en-vcx: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + xcsi2rxss_1: csi2rx@a0020000 { + compatible = "xlnx,mipi-csi2-rx-subsystem-5.0"; + reg = <0xa0020000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <0 95 4>; + xlnx,csi-pxl-format = <0x2a>; + xlnx,vfb; + xlnx,en-active-lanes; + xlnx,en-csi-v2-0; + xlnx,en-vcx; + clock-names = "lite_aclk", "video_aclk"; + clocks = <&misc_clk_0>, <&misc_clk_1>; + video-reset-gpios = <&gpio 86 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* Sink port */ + reg = <0>; + csiss_in: endpoint { + data-lanes = <1 2 3 4>; + /* MIPI CSI-2 Camera handle */ + remote-endpoint = <&camera_out>; + }; + }; + port@1 { + /* Source port */ + reg = <1>; + csiss_out: endpoint { + remote-endpoint = <&vproc_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/zx-irdec.txt b/Documentation/devicetree/bindings/media/zx-irdec.txt deleted file mode 100644 index 295b9fab593e..000000000000 --- a/Documentation/devicetree/bindings/media/zx-irdec.txt +++ /dev/null @@ -1,14 +0,0 @@ -IR Decoder (IRDEC) on ZTE ZX family SoCs - -Required properties: - - compatible: Should be "zte,zx296718-irdec". - - reg: Physical base address and length of IRDEC registers. - - interrupts: Interrupt number of IRDEC. - -Exmaples: - - irdec: ir-decoder@111000 { - compatible = "zte,zx296718-irdec"; - reg = <0x111000 0x1000>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - }; |