diff options
Diffstat (limited to 'Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml | 60 |
1 files changed, 49 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml index 90315e217003..a37447256f8d 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -39,7 +39,7 @@ properties: maxItems: 1 poc-supply: - description: Regulator providing Power over Coax to the cameras + description: Regulator providing Power over Coax to all the ports enable-gpios: description: GPIO connected to the \#PWDN pin with inverted polarity @@ -50,6 +50,21 @@ properties: '#gpio-cells': const: 2 + maxim,bus-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 24, 27, 32 ] + description: | + The GMSL serial data bus width. This setting is normally controlled by + the BWS pin, but may be overridden with this property. The value must + match the configuration of the remote serializers. + + maxim,i2c-remote-bus-hz: + enum: [ 8470, 28300, 84700, 105000, 173000, 339000, 533000, 837000 ] + default: 105000 + description: | + The I2C clock frequency for the remote I2C buses. The value must match + the configuration of the remote serializers. + maxim,reverse-channel-microvolt: minimum: 30000 maximum: 200000 @@ -71,7 +86,7 @@ properties: is 100000 micro volts maxim,gpio-poc: - $ref: '/schemas/types.yaml#/definitions/uint32-array' + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2 description: | @@ -141,6 +156,7 @@ properties: patternProperties: "^i2c@[0-3]$": type: object + additionalProperties: false description: | Child node of the i2c bus multiplexer which represents a GMSL link. Each serializer device on the GMSL link remote end is represented with @@ -152,6 +168,12 @@ properties: description: The index of the GMSL channel. maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + patternProperties: "^camera@[a-f0-9]+$": type: object @@ -182,21 +204,36 @@ properties: additionalProperties: false +patternProperties: + "^port[0-3]-poc-supply$": + description: Regulator providing Power over Coax for a particular port + required: - compatible - reg - ports - i2c-mux -# If 'maxim,gpio-poc' is present, then 'poc-supply' and 'gpio-controller' -# are not allowed. -if: - required: - - maxim,gpio-poc -then: - properties: - poc-supply: false - gpio-controller: false +allOf: + # Only one way of specifying power supplies is allowed: 'maxim,gpio-poc', + # 'poc-supply' or per-port poc-supply. Additionally, if 'maxim,gpio-poc' is + # present, then 'gpio-controller' isn't allowed. + - if: + required: + - maxim,gpio-poc + then: + properties: + poc-supply: false + gpio-controller: false + patternProperties: + "^port[0-3]-poc-supply$": false + + - if: + required: + - poc-supply + then: + patternProperties: + "^port[0-3]-poc-supply$": false additionalProperties: false @@ -219,6 +256,7 @@ examples: gpio-controller; #gpio-cells = <2>; + maxim,i2c-remote-bus-hz = <339000>; maxim,reverse-channel-microvolt = <170000>; ports { |