1 files changed, 0 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
deleted file mode 100644
index 632f473db65b..000000000000
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Synaptics RMI4 SPI Device Binding
-
-The Synaptics RMI4 core is able to support RMI4 devices using different
-transports and different functions. This file describes the device tree
-bindings for devices using the SPI transport driver. Complete documentation
-for other transports and functions can be found in
-Documentation/devicetree/bindings/input/rmi4.
-
-Required Properties:
-- compatible: syna,rmi4-spi
-- reg: Chip select address for the device
-- #address-cells: Set to 1 to indicate that the function child nodes
-		    consist of only on uint32 value.
-- #size-cells: Set to 0 to indicate that the function child nodes do not
-		have a size property.
-
-Optional Properties:
-- interrupts: interrupt which the rmi device is connected to.
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-- spi-rx-delay-us: microsecond delay after a read transfer.
-- spi-tx-delay-us: microsecond delay after a write transfer.
-
-Function Parameters:
-Parameters specific to RMI functions are contained in child nodes of the rmi device
- node. Documentation for the parameters of each function can be found in:
-Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt.
-
-
-
-Example:
-	spi@7000d800 {
-		rmi4-spi-dev@0 {
-			compatible = "syna,rmi4-spi";
-			reg = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			spi-max-frequency = <4000000>;
-			spi-cpha;
-			spi-cpol;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(K, 2) 0x2>;
-			spi-rx-delay-us = <30>;
-
-			rmi4-f01@1 {
-				reg = <0x1>;
-				syna,nosleep-mode = <1>;
-			};
-
-			rmi4-f11@11 {
-				reg = <0x11>;
-				touchscreen-inverted-y;
-				syna,sensor-type = <2>;
-			};
-		};
-	};