diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/light')
3 files changed, 78 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.txt b/Documentation/devicetree/bindings/iio/light/bh1750.txt new file mode 100644 index 000000000000..1e7685797d7a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/bh1750.txt @@ -0,0 +1,18 @@ +ROHM BH1750 - ALS, Ambient light sensor + +Required properties: + +- compatible: Must be one of: + "rohm,bh1710" + "rohm,bh1715" + "rohm,bh1721" + "rohm,bh1750" + "rohm,bh1751" +- reg: the I2C address of the sensor + +Example: + +light-sensor@23 { + compatible = "rohm,bh1750"; + reg = <0x23>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt b/Documentation/devicetree/bindings/iio/light/tsl2772.txt new file mode 100644 index 000000000000..1c5e6f17a1df --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.txt @@ -0,0 +1,42 @@ +* AMS/TAOS ALS and proximity sensor + +Required properties: + + - compatible: Should be one of + "amstaos,tsl2571" + "amstaos,tsl2671" + "amstaos,tmd2671" + "amstaos,tsl2771" + "amstaos,tmd2771" + "amstaos,tsl2572" + "amstaos,tsl2672" + "amstaos,tmd2672" + "amstaos,tsl2772" + "amstaos,tmd2772" + "avago,apds9930" + - reg: the I2C address of the device + +Optional properties: + + - amstaos,proximity-diodes - proximity diodes to enable. <0>, <1>, or <0 1> + are the only valid values. + - led-max-microamp - current for the proximity LED. Must be 100000, 50000, + 25000, or 13000. + - vdd-supply: phandle to the regulator that provides power to the sensor. + - vddio-supply: phandle to the regulator that provides power to the bus. + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic interrupt client + node bindings. + +Example: + +tsl2772@39 { + compatible = "amstaos,tsl2772"; + reg = <0x39>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + amstaos,proximity-diodes = <0>; + led-max-microamp = <100000>; +}; diff --git a/Documentation/devicetree/bindings/iio/light/vcnl4035.txt b/Documentation/devicetree/bindings/iio/light/vcnl4035.txt new file mode 100644 index 000000000000..c07c7f052556 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/vcnl4035.txt @@ -0,0 +1,18 @@ +VISHAY VCNL4035 - Ambient Light and proximity sensor + +Link to datasheet: https://www.vishay.com/docs/84251/vcnl4035x01.pdf + +Required properties: + + -compatible: should be "vishay,vcnl4035" + -reg: I2C address of the sensor, should be 0x60 + -interrupts: interrupt mapping for GPIO IRQ (level active low) + +Example: + +light-sensor@60 { + compatible = "vishay,vcnl4035"; + reg = <0x60>; + interrupt-parent = <&gpio4>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; |