diff options
Diffstat (limited to 'Documentation/devicetree/bindings/i2c')
14 files changed, 295 insertions, 129 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml index da6129090a8e..78ffcab2428c 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml @@ -52,15 +52,15 @@ properties: description: sda and scl gpio, alternative for {sda,scl}-gpios i2c-gpio,sda-open-drain: - # Generate a warning if present - not: true + type: boolean + deprecated: true description: this means that something outside of our control has put the GPIO line used for SDA into open drain mode, and that something is not the GPIO chip. It is essentially an inconsistency flag. i2c-gpio,scl-open-drain: - # Generate a warning if present - not: true + type: boolean + deprecated: true description: this means that something outside of our control has put the GPIO line used for SCL into open drain mode, and that something is not the GPIO chip. It is essentially an inconsistency flag. diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt deleted file mode 100644 index f0c072ff9eca..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Freescale Low Power Inter IC (LPI2C) for i.MX - -Required properties: -- compatible : - - "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc - - "fsl,imx8qxp-lpi2c" for LPI2C compatible with the one integrated on i.MX8QXP soc - - "fsl,imx8qm-lpi2c" for LPI2C compatible with the one integrated on i.MX8QM soc -- reg : address and length of the lpi2c master registers -- interrupts : lpi2c interrupt -- clocks : lpi2c clock specifier - -Examples: - -lpi2c7: lpi2c7@40a50000 { - compatible = "fsl,imx7ulp-lpi2c"; - reg = <0x40A50000 0x10000>; - interrupt-parent = <&intc>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7ULP_CLK_LPI2C7>; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml new file mode 100644 index 000000000000..ac0bc5dd64d6 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-imx-lpi2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Low Power Inter IC (LPI2C) for i.MX + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + enum: + - fsl,imx7ulp-lpi2c + - fsl,imx8qxp-lpi2c + - fsl,imx8qm-lpi2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx7ulp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + lpi2c7@40a50000 { + compatible = "fsl,imx7ulp-lpi2c"; + reg = <0x40A50000 0x10000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7ULP_CLK_LPI2C7>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt deleted file mode 100644 index b967544590e8..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX - -Required properties: -- compatible : - - "fsl,imx1-i2c" for I2C compatible with the one integrated on i.MX1 SoC - - "fsl,imx21-i2c" for I2C compatible with the one integrated on i.MX21 SoC - - "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC -- reg : Should contain I2C/HS-I2C registers location and length -- interrupts : Should contain I2C/HS-I2C interrupt -- clocks : Should contain the I2C/HS-I2C clock specifier - -Optional properties: -- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz. - The absence of the property indicates the default frequency 100 kHz. -- dmas: A list of two dma specifiers, one for each entry in dma-names. -- dma-names: should contain "tx" and "rx". -- scl-gpios: specify the gpio related to SCL pin -- sda-gpios: specify the gpio related to SDA pin -- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c - bus recovery, call it "gpio" state - -Examples: - -i2c@83fc4000 { /* I2C2 on i.MX51 */ - compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; - reg = <0x83fc4000 0x4000>; - interrupts = <63>; -}; - -i2c@70038000 { /* HS-I2C on i.MX51 */ - compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; - reg = <0x70038000 0x4000>; - interrupts = <64>; - clock-frequency = <400000>; -}; - -i2c0: i2c@40066000 { /* i2c0 on vf610 */ - compatible = "fsl,vf610-i2c"; - reg = <0x40066000 0x1000>; - interrupts =<0 71 0x04>; - dmas = <&edma0 0 50>, - <&edma0 0 51>; - dma-names = "rx","tx"; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml new file mode 100644 index 000000000000..869f2ae3d5b3 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-imx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX + +maintainers: + - Wolfram Sang <wolfram@the-dreams.de> + +properties: + compatible: + oneOf: + - const: fsl,imx1-i2c + - const: fsl,imx21-i2c + - const: fsl,vf610-i2c + - items: + - const: fsl,imx35-i2c + - const: fsl,imx1-i2c + - items: + - enum: + - fsl,imx25-i2c + - fsl,imx27-i2c + - fsl,imx31-i2c + - fsl,imx50-i2c + - fsl,imx51-i2c + - fsl,imx53-i2c + - fsl,imx6q-i2c + - fsl,imx6sl-i2c + - fsl,imx6sx-i2c + - fsl,imx6sll-i2c + - fsl,imx6ul-i2c + - fsl,imx7s-i2c + - fsl,imx8mq-i2c + - fsl,imx8mm-i2c + - fsl,imx8mn-i2c + - fsl,imx8mp-i2c + - const: fsl,imx21-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ipg + + clock-frequency: + enum: [ 100000, 400000 ] + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + + sda-gpios: + maxItems: 1 + + scl-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx5-clock.h> + #include <dt-bindings/clock/vf610-clock.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c@83fc4000 { + compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; + reg = <0x83fc4000 0x4000>; + interrupts = <63>; + clocks = <&clks IMX5_CLK_I2C2_GATE>; + }; + + i2c@40066000 { + compatible = "fsl,vf610-i2c"; + reg = <0x40066000 0x1000>; + interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_I2C0>; + clock-names = "ipg"; + dmas = <&edma0 0 50>, + <&edma0 0 51>; + dma-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt index 88b71c1b32c9..7f0194fdd0cc 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt @@ -14,6 +14,7 @@ Required properties: "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629 "mediatek,mt8173-i2c": for MediaTek MT8173 "mediatek,mt8183-i2c": for MediaTek MT8183 + "mediatek,mt8192-i2c": for MediaTek MT8192 "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516 - reg: physical base address of the controller and dma base, length of memory mapped region. diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt deleted file mode 100644 index 4e1c8ac01eba..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Freescale MXS Inter IC (I2C) Controller - -Required properties: -- compatible: Should be "fsl,<chip>-i2c" -- reg: Should contain registers location and length -- interrupts: Should contain ERROR interrupt number -- clock-frequency: Desired I2C bus clock frequency in Hz. - Only 100000Hz and 400000Hz modes are supported. -- dmas: DMA specifier, consisting of a phandle to DMA controller node - and I2C DMA channel ID. - Refer to dma.txt and fsl-mxs-dma.txt for details. -- dma-names: Must be "rx-tx". - -Examples: - -i2c0: i2c@80058000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-i2c"; - reg = <0x80058000 2000>; - interrupts = <111>; - clock-frequency = <100000>; - dmas = <&dma_apbx 6>; - dma-names = "rx-tx"; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml new file mode 100644 index 000000000000..d3134ed775fa --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mxs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS Inter IC (I2C) Controller + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +properties: + compatible: + enum: + - fsl,imx23-i2c + - fsl,imx28-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: + enum: [ 100000, 400000 ] + + dmas: + maxItems: 1 + + dma-names: + const: rx-tx + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + i2c@80058000 { + compatible = "fsl,imx28-i2c"; + reg = <0x80058000 2000>; + interrupts = <111>; + clock-frequency = <100000>; + dmas = <&dma_apbx 6>; + dma-names = "rx-tx"; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt deleted file mode 100644 index c30783c0eca0..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Marvell MMP I2C controller - -Required properties : - - - reg : Offset and length of the register set for the device - - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a - compatible processor, e.g. pxa168, pxa910, mmp2, mmp3. - For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required - as shown in the example below. - For the Armada 3700, the compatible should be "marvell,armada-3700-i2c". - -Recommended properties : - - - interrupts : the interrupt number - - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling - status register of i2c controller instead. - - mrvl,i2c-fast-mode : Enable fast mode of i2c controller. - -Examples: - twsi1: i2c@d4011000 { - compatible = "mrvl,mmp-twsi"; - reg = <0xd4011000 0x1000>; - interrupts = <7>; - mrvl,i2c-fast-mode; - }; - - twsi2: i2c@d4025000 { - compatible = "mrvl,mmp-twsi"; - reg = <0xd4025000 0x1000>; - interrupts = <58>; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml new file mode 100644 index 000000000000..da6e8bdc4037 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-pxa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP I2C controller bindings + +maintainers: + - Rob Herring <robh+dt@kernel.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + not: + required: + - mrvl,i2c-polling + then: + required: + - interrupts + +properties: + compatible: + enum: + - mrvl,mmp-twsi + - mrvl,pxa-i2c + - marvell,armada-3700-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + + resets: + minItems: 1 + + mrvl,i2c-polling: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Disable interrupt of i2c controller. Polling status register of i2c + controller instead. + + mrvl,i2c-fast-mode: + $ref: /schemas/types.yaml#/definitions/flag + description: Enable fast mode of i2c controller. + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - '#address-cells' + - '#size-cells' + +examples: + - | + #include <dt-bindings/clock/marvell,mmp2.h> + i2c@d4011000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4011000 0x1000>; + interrupts = <7>; + clocks = <&soc_clocks MMP2_CLK_TWSI1>; + mrvl,i2c-fast-mode; + #address-cells = <1>; + #size-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index 438ae123107e..a21c359b9f02 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -72,6 +72,16 @@ wants to support one of the below features, it should adapt these bindings. this information to adapt power management to keep the arbitration awake all the time, for example. Can not be combined with 'single-master'. +- pinctrl + add extra pinctrl to configure SCL/SDA pins to GPIO function for bus + recovery, call it "gpio" or "recovery" (deprecated) state + +- scl-gpios + specify the gpio related to SCL pin. Used for GPIO bus recovery. + +- sda-gpios + specify the gpio related to SDA pin. Optional for GPIO bus recovery. + - single-master states that there is no other master active on this bus. The OS can use this information to detect a stalled bus more reliably, for example. diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml index 2ceb05ba2df5..5b5ae402f97a 100644 --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -27,6 +27,9 @@ properties: - const: allwinner,sun50i-a64-i2c - const: allwinner,sun6i-a31-i2c - items: + - const: allwinner,sun50i-a100-i2c + - const: allwinner,sun6i-a31-i2c + - items: - const: allwinner,sun50i-h6-i2c - const: allwinner,sun6i-a31-i2c diff --git a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt index a03f9f5cb378..96d869ac3839 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt +++ b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt @@ -10,6 +10,7 @@ Required properties: "renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC. "renesas,i2c-r8a774b1" if the device is a part of a R8A774B1 SoC. "renesas,i2c-r8a774c0" if the device is a part of a R8A774C0 SoC. + "renesas,i2c-r8a774e1" if the device is a part of a R8A774E1 SoC. "renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC. "renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC. "renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC. diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic.txt b/Documentation/devicetree/bindings/i2c/renesas,iic.txt index 89facb09337a..93d412832e66 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,iic.txt +++ b/Documentation/devicetree/bindings/i2c/renesas,iic.txt @@ -11,6 +11,7 @@ Required properties: - "renesas,iic-r8a774a1" (RZ/G2M) - "renesas,iic-r8a774b1" (RZ/G2N) - "renesas,iic-r8a774c0" (RZ/G2E) + - "renesas,iic-r8a774e1" (RZ/G2H) - "renesas,iic-r8a7790" (R-Car H2) - "renesas,iic-r8a7791" (R-Car M2-W) - "renesas,iic-r8a7792" (R-Car V2H) |