diff options
Diffstat (limited to 'Documentation/devicetree/bindings/hwmon')
6 files changed, 77 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt new file mode 100644 index 000000000000..1ecd03f3da4d --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt @@ -0,0 +1,25 @@ +adm1275 properties + +Required properties: +- compatible: Must be one of the supported compatible strings: + - "adi,adm1075" for adm1075 + - "adi,adm1272" for adm1272 + - "adi,adm1275" for adm1275 + - "adi,adm1276" for adm1276 + - "adi,adm1278" for adm1278 + - "adi,adm1293" for adm1293 + - "adi,adm1294" for adm1294 +- reg: I2C address + +Optional properties: + +- shunt-resistor-micro-ohms + Shunt resistor value in micro-Ohm + +Example: + +adm1272@10 { + compatible = "adi,adm1272"; + reg = <0x10>; + shunt-resistor-micro-ohms = <500>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt new file mode 100644 index 000000000000..a7b25caa2b8e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt @@ -0,0 +1,44 @@ +Texas Instruments INA3221 Device Tree Bindings + +1) ina3221 node + Required properties: + - compatible: Must be "ti,ina3221" + - reg: I2C address + + Optional properties: + = The node contains optional child nodes for three channels = + = Each child node describes the information of input source = + + - #address-cells: Required only if a child node is present. Must be 1. + - #size-cells: Required only if a child node is present. Must be 0. + +2) child nodes + Required properties: + - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221 + + Optional properties: + - label: Name of the input source + - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm + +Example: + +ina3221@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + status = "disabled"; + }; + input@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <5000>; + }; + input@2 { + reg = <0x2>; + label = "VDD_5V"; + shunt-resistor-micro-ohms = <5000>; + }; +}; diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt index 97581266e329..c76a7ac47c34 100644 --- a/Documentation/devicetree/bindings/hwmon/lm90.txt +++ b/Documentation/devicetree/bindings/hwmon/lm90.txt @@ -23,6 +23,7 @@ Required node properties: "onnn,nct1008" "winbond,w83l771" "nxp,sa56004" + "ti,tmp451" - reg: I2C bus address of the device diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt index bf2a47bbdc58..b428a70a7cc0 100644 --- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt @@ -15,6 +15,7 @@ Required properties: * "lltc,ltm2987" * "lltc,ltm4675" * "lltc,ltm4676" + * "lltc,ltm4686" - reg: I2C slave address Optional properties: @@ -30,6 +31,7 @@ Valid names of regulators depend on number of supplies supported per device: * ltc3880, ltc3882, ltc3886 : vout0 - vout1 * ltc3883 : vout0 * ltm4676 : vout0 - vout1 + * ltm4686 : vout0 - vout1 Example: ltc2978@5e { diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt index c3b9c4cfe8df..37f18d684f6a 100644 --- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt @@ -4,6 +4,7 @@ NTC Thermistor hwmon sensors Requires node properties: - "compatible" value : one of "epcos,b57330v2103" + "epcos,b57891s0103" "murata,ncp15wb473" "murata,ncp18wb473" "murata,ncp21wb473" diff --git a/Documentation/devicetree/bindings/hwmon/tmp108.txt b/Documentation/devicetree/bindings/hwmon/tmp108.txt index 8c4b10df86d9..54d4beed4ee5 100644 --- a/Documentation/devicetree/bindings/hwmon/tmp108.txt +++ b/Documentation/devicetree/bindings/hwmon/tmp108.txt @@ -7,6 +7,10 @@ Requires node properties: - compatible : "ti,tmp108" - reg : the I2C address of the device. This is 0x48, 0x49, 0x4a, or 0x4b. +Optional properties: +- interrupts: Reference to the TMP108 alert interrupt. +- #thermal-sensor-cells: should be set to 0. + Example: tmp108@48 { compatible = "ti,tmp108"; |